Roles and responsibilities could vary; however, a normal day would include the following but is not limited to:
Using the tools and equipment used in vehicle maintenance and repair
Learning safe working procedures in the workshop
Assisting other technicians with their work whilst receiving on the job training
Learning how to inspect and service commercial vehicles and trailers
Learning simple and complex fault diagnosis and repairs on engine, chassis, transmission and electrical systems
Keeping the workshop clean and tidy
Training:Heavy Vehicle Service and Maintenance Technician Level 3.
The apprenticeship training will be delivered at the Training Provider setting and on site at DSV Commercials. All information relevant to your Training Plan will be issued once selected.Training Outcome:Become part of a company that invests in you. If you show the desire to learn and the work ethic to progress, there will always be opportunities within DSV. Potential opportunities for progress within the team.Employer Description:DSV Commercials operate a commercial vehicle and trailer workshop which provides maintenance and repairs of all makes of light through to heavy commercial vehicles, including trailers, specialising in Petroleum Road spirit tankers.
The workshop facility is situated in South Killingholme which is ideally located close to the entrance of the Immingham docks and Killingholme port providing both convenient and time saving solutions. The site comprises of an extensive range of specialist tools and equipment boasting a £300K stock holding. With advanced computerised diagnostic equipment now in use, we can reduce vehicle downtime in fault finding and repairs. As loan vehicle specialists, DSV Commercials supply alternative transportation for drivers dropping off vehicles to return to base.
DSV Commercials hold the MAN Truck and Bus Ltd franchise for the North Lincolnshire area supporting MAN and ERF Trucks as well as Neoplan Bus and coach products, the portfolio includes owner drivers through to large blue-chip companies carrying hazardous goods.
DSV Commercials pride themselves in customer service and outstanding performance, to support this we continually focus on qualifying, and consistently achieve the UTP (Up Time Principle) Performance reward which is monitored quarterly for the achievement of the following 5 targets: -
MOT first time pass rate target:(minimum 92%)
PMI slippage:(90% of vehicle's must be serviced during the week scheduled)
VSA/PSA: (Vehicle / Parts Service Alert) (assuring minimum downtime)
Mobile 24 accepted:(100% of breakdowns must be accepted)
Mobile 24 attendance:(95% of breakdowns must be attended to within 60 minutes)Working Hours :08:00 to 16:30 - Monday to Friday with ½ unpaid lunchSkills: Communication skills,IT skills,Attention to detail,Organisation skills,Customer care skills,Problem solving skills,Presentation skills,Administrative skills,Number skills,Analytical skills,Logical,Team working,Creative,Initiative,Non judgemental,Patience,Physical fitness,Punctual,Enthusiastic....Read more...
Rotation around key departments within the organisation to gain valuable skills in each of the relevant areas
Alongside on-the-job training, apprentices spend at least 20% of their working hours completing classroom-based learning with Dudley College, which leads to a nationally recognised qualification
Performing all practical and administrative duties assigned by the supervisor
Training:You will be required to attend Advance 1 Campus, Dudley College, DY1 4AD, 1 day per week in term time only.
Upon successful completion of your apprenticeship, you will receive a Level 4 Engineering Manufacturing Technician (elec/elec) HNC Apprenticeship qualification
You will be assigned an assessor who will visit you in the workplace every 6–8 weeks to support you on your apprenticeship
Training Outcome:Progression to a permanent position within the organisation.Employer Description:At SSG we believe that human interaction is an essential part of the care giving process, and that good technology should enable caregivers to be free from unnecessary distractions, so they can focus on giving their patients the care they need, when they need it.
That’s why, for almost 60 years, we have been developing smart solutions and technologies that connect people and systems to provide safer, heathier environments for both staff and patients in the acute care setting.
From our first electronic nurse ‘call bell’ system launched in 1964, that enabled patients in hospital to call for help, we have continued to explore ways that technology can work for our customers. Whether that is providing essential critical alarms, integrated communication systems or software solutions to enhance clinical workflow, our focus is on keeping patients safe, providing a calming environment, and giving our customers more time to care.
We are proud to be a British manufacturer, with a strong heritage in product design, build and installation. As technology advances, our digital solutions can help customers evolve with the ever-changing demands of the healthcare environment, preserving resources, reducing costs and improving patient care.
Our people are inspired and empowered to develop best in class solutions that have a positive impact on the patient and carer experience. As part of the Halma family, we are passionate about creating a safer, cleaner and healthier future for everyone, every day.
OUR PURPOSE – To create a world where every patient feels safe.
OUR VISION – A world where technology works for people, so that caregivers have more time to care for their patients.
OUR MISSION – We provide smart communication solutions, connecting caregivers, patients and data, to improve workflow and decision making, so that patients get the care they need, when they need it.Working Hours :Monday to Thursday 09:00 - 17:00.
Friday 09:00 - 16:30.Skills: Communication skills,Attention to detail,Organisation skills,Team working....Read more...
Under supervision, carry out work on vehicles in accordance with the manufacture’s procedures
Ensure all work carried out is completed accurately and to the customer’s satisfaction
To report, using the correct procedures, any additional work found during repair/inspection
Accurately complete job cards and reports, including any written descriptions of faults found or repairs completed
To comply with the company's working practices and procedures
Ensure all work is carried out observing safe working practices of self and others
To undertake training as agreed by the manager/academy
Attend academy as required to gain the relevant qualifications
Ensure that own tools and tools of the company are kept clean and are maintained in a serviceable condition
Advise the Service Advisors - Customers about required repairsIdentify & procure correct parts to meet specific customer requirements
Demonstrate technical expertise in the practical and theoretical aspects of vehicle systems
Work towards achieving a qualification in Electric Vehicle and then progress onto further Electric Vehicle Training
Demonstrates and maintains an appropriate level of technical expertise for a technician in the motor industry. Inspects vehicles and completes allocated work efficiently and accurately, supported by the effective use of relevant tools and technology
Aligned to the Stoneacre brand values and demonstrates these in their behaviours and approach to people and tasks. Displays honesty and integrity in everything they do
Inspection, removal and repair of tyres, exhausts, shock absorbers, brakes, filters, and batteries
Delivering a high level of customer service to all your colleagues and customers
Training Outcome:
This is a fantastic opportunity for anyone wanting a career
Our philosophy is at Stoneacre is to create careers for lifeLearners, employers and staff are our most important assetThe success of our company depends on the development of a strong effective team
Stoneacre has its own accreditationAutomotive Academy with our specialised training programmes we aim to aspire all individuals to achieve their ultimate goals through the Stoneacre Careers for life programme
Employer Description:Stoneacre Motor Group is one of the UK's fastest growing and most successful motor vehicle dealers. We have over 40 nationwide. Stoneacre Academy is the Award-Winning Training Department of Stoneacre Motor Group. We’ve already enrolled and completed 100s of apprentices who work in a variety of roles. Our philosophy at Stoneacre Academy is to create CAREERS FOR LIFE and offer sustainable, life-changing opportunities.Working Hours :Monday - Friday - this may include Saturdays. Hours dependent on individual dealership. Typical day 8.30am - 5.30pm.Skills: Communication skills,IT skills,Attention to detail,Organisation skills,Customer care skills,Problem solving skills,Presentation skills,Administrative skills,Number skills,Analytical skills,Logical,Team working,Creative,Initiative,Non judgemental,Patience....Read more...
Fire & Security TechnicianSalary £33k-40k + overtime and call outs + company vanPoole – regular travel – UK Driving license essentialFul timeWhat WE offer YOU£33,000.00-£40,000.00 per year before overtime and call outsMonday to Friday working days. (Basic 40 hours per week)Overtime available at enhanced rate.Travel time paid.Company Share Options issued yearly.Holiday starts at 20 days per annum rising to 25 days per annum with years of service plus bank holidays.Company van, laptop, mobile and specialist tools providedCroma Fire & Security, part of the Croma Security Solutions Group, is a national provider of high-quality Security solutions. We deliver everything from small domestic installations to large commercial projects—and we’re growing.We are now looking for an experienced Fire & Security Engineer to join our team in Poole, supporting a diverse range of clients and systems.What You’ll Be Doing
Install, commission, service and repair Intruder Alarms, CCTV, Access Control and Fire Alarm Systems.Complete PPMs, maintenance and reactive works to achieve high first-time fix rates.Communicate effectively with Admin, Sales and Operations teams to ensure seamless scheduling.Upload documentation, certificates, photos and notes via our job management system.Maintain accurate van stock, tools and vehicle condition.Be part of the call-out Rota and occasionally provide remote support.Identify design issues or repeat faults and support continuous improvement.
What You’ll Need
Proven experience with Intruder, CCTV, Access Control and Fire Systems.Strong fault-finding and customer service skills.Good communication and timekeeping.Full UK Driving Licence.Ability to work both independently and as part of a team.To pass the NSI Gold standard vetting process.To pass the Enhanced DBS check (as we do service schools, care homes and hospitals)
Our Commitment to Fair & Inclusive HiringAt Croma Security Solutions Group we are committed to creating a workplace where everyone feels valued, supported and able to succeed. We operate an unbiased recruitment process and if you need support to apply, let us know – your talent matters. Ready to join us? INDHS Equals One is an advertising and recruitment agency working on behalf of our client to promote this vacancy. You may be contacted directly by the employer should they wish to progress your application. Due to the number of applications we receive, we are unable to provide specific feedback if your application is unsuccessful.....Read more...
Outline of day-to-day duties:
Assembly & Manufacturing:
Assemble and test water purification systems (including Deionisation, Reverse Osmosis, Ultra Filtration, and Ultraviolet Sterilisation) using hand tools, drills, soldering equipment, and centre lathe operations as required
Perform electrical wiring of control panels
Work from engineering drawings, technical manuals, and specifications to ensure accurate assembly
Modify or adjust equipment as required to meet specifications or resolve issues
Cylinder Filling & Preparation:
Fill customer resin cylinders to required specifications
Ensure all cylinders are labelled, sealed, and prepared for delivery or collection in line with company procedures
Maintain records of all cylinders filled and dispatched
Repairs & Maintenance:
Diagnose faults and carry out repairs on equipment in the workshop
Replace or refurbish components as required
Conduct preventative maintenance on company-owned equipment and tools
Logistics & Stock Control:
Receive deliveries of parts, materials, and equipment
Check deliveries to ensure items are correct, undamaged, and meet specified quality standards
Booking in deliveries correctly via Sage 50 Accounts Professional software
Liaise with suppliers and check deliveries against purchase orders
Maintain stock usage records and assist in inventory control
Testing & Quality Control:
Test equipment to verify correct operation and compliance with company quality standards
Record test results and complete all required job documentation
Report any nonconformities or defects promptly
Health & Safety:
Maintain a clean, safe, and organised workshop in compliance with Health & Safety regulations
Ensure tools and machinery are safe to use and report any faults immediately
Wear PPE as required and follow safe working practices at all times
Authorities:
Carry out workshop work on approved jobs without additional supervision
No authority to approve purchases - must request parts/materials via authorised purchasing channels
Authority to stop work and report if unsafe conditions or quality issues are identified
Training:
Engineering maintenance technician
Training Outcome:
To be a Water Treatment Engineer out on site
Employer Description:Wychwood Water Systems began trading in 1996, with a focus on design, manufacturing, installation and continuous support. The founder of the Company, having worked in the industry for some years, recognised that clients required a much more responsive and quality service than was being offered by large suppliers in the industry.
Today, the Company has a strong experienced team covering the UK, as well as countries such as Georgia, Ethiopia, Cuba, Poland, Ireland and many others.
Our company has always been about the team and still is. When our customers choose us, they are choosing a company that will partner with them to deliver reliable pure water solutions and will support them in every step of the process.Working Hours :Monday - Friday, 8.00am - 5.00pm. 1 hour break.Skills: Communication skills,Attention to detail,Problem solving skills,Administrative skills,Mechanical/Electrical assembly,Mechanical/Electrical repair,Hand tool skills,read engineering drawings....Read more...
Electrical winding – assembling conducting wires onto electromagnetic components manually and semi-automatically
Insulation and dielectric circuit testing
Mechanical assembly of motors and actuators
Bearing assembly onto shafts
High-speed rotor balancing
Magnetisation processes
Dynamometer testing
Assembly of printed circuit boards
Inspection to aerospace quality standards
Examples of products you will manufacture include:
Electric motors
Printed Circuit Board assemblies
Generators
Transformers and rectifiers
High-speed and high-precision electro-mechanical assemblies
You will work to strict aerospace quality standards where attention to detail, accuracy and consistency are critical
Training:Training will be delivered in partnership with Rochdale Training Association (RTA).
Year 1:You will complete your NVQ Level 2 through a structured block release engineering programme, spending most of your time at RTA developing core engineering skills and knowledge.
Years 2–3:You will progress onto NVQ Level 3, primarily based at NEMA with one day per week at college. During this stage you will rotate through departments across the workshop, gaining broad exposure to machining, winding, assembly, testing and inspection.
A key milestone will be producing a complete electric motor assembly and its constituent components from scratch, giving you a full understanding of the entire manufacturing process.
After completing your departmental rotations and motor build project, you will be placed within a specialist department where your development will continue in line with business needs and your strengths.
Subject to performance and attainment, NEMA may fully fund progression to Level 4 and beyond.Training Outcome:Upon successful completion of Level 3, apprentices may:
Secure a permanent skilled role within a specialist department
Progress onto Level 4 engineering qualifications (fully funded)
Develop into senior technician or specialist roles
Employer Description:Established in 1954, NEMA Ltd is a Tier 2 aerospace engineering manufacturer supplying precision electro-mechanical products to leading global aerospace organisations. Operating to AS9100 Rev D standards, NEMA holds quality approvals with BAE Systems, Airbus, Boeing, Leonardo, Triumph and other major aerospace manufacturers.
Over 95% of manufacturing is completed in-house, including precision machining, electrical winding, assembly, test, springs and metal pressings. This ensures strict quality control and provides apprentices with exposure to a wide range of advanced engineering processes under one roof.
In addition to design, development, prototype and volume production of motors, generators and actuators, NEMA also provides specialist electromagnetic consultancy across multiple sectors including aerospace, metal processing and high-voltage transmission.
This is an opportunity to build a long-term engineering career in a highly skilled, safety-critical environment where quality and precision are paramount.Working Hours :4 day working week.
Monday – Thursday.
Flexible hours between 6:00am – 5:30pm.
9.5 hours per day.Skills: Attention to detail,Organisation skills,Number skills,Physical fitness....Read more...
The successful applicant will be expected to learn about the following:
Keeping the workshop clean & tidy
How to use tools & equipment used in Vehicle Maintenance & Repair
Safe working procedures in the workshop
Assisting other vehicle technicians with their work whilst receiving on the job training
How to service and inspect a vehicle
How to safely remove and replace Engine, Chassis, Electrical and Transmission components
How to carry out Simple and Complex Fault Diagnosis and Repairs on Engine, Chassis, Transmission and Electrical systems
How you will be supported:
Full training and support will be provided by The Growth Company to help you achieve your apprenticeship and reach your full potential in your role
What will happen next:
New applicants to The Growth Company who meet any basic entry requirements of the role will be contacted within two working days to be invited to meet a member of our team
You will then have the opportunity to find out:
More about this vacancy and any others you are suitable for
Any training you need to complete
What the next steps will be
How you could get there:
If you would be catching public transport for this role, visit the Journey Planner on www.tfgm.com to see how you would get there and how long it would take
Training:Heavy Vehicle Service and Maintenance Technician Level 3.Training Outcome:Possible progression within the company and progression onto the next level apprenticeship.Employer Description:Warrington’s Own Buses can trace its routes back to 1902, when the first electric tram commenced operation in Warrington. Over 119 years later, we’re still going strong, providing quality local bus services the town of Warrington rightly deserves.We carry over 6 million passengers per year using a fleet of 118 buses that operate approximately 5 million kilometres in service per annum. Warrington is currently one of the fastest growing economies in the North West and high quality public transport is essential to the town's continued development. We strive to deliver the best possible public transport service for Warrington, and our community ownership gives locals a real say on transport strategy.We operate under a number of different brands including The Cheshire Cat, Connect17 and The Pops, each giving an enhanced product offering to the communities they serve. In 2018, we introduced the Cheshire Cat branding on services 5/6/7/8/9 with brand new buses, each fitted with USB charging, Wifi, visual/audio announcements and even a sofa! While we still promote the same traditional core values that our customers love, we’re also working to innovate bus travel in and around Warrington.Working Hours :Monday - Friday, 8.30am - 4.30pmSkills: Attention to detail,Organisation skills,Problem solving skills,Team working,Knowledge of HGV maintenance,Interest in automotive trade,Enthusiastic,Proactive,Able to follow instructions....Read more...
Reporting into the Design Manager the apprentice will:
Assist in the preparation of technical drawings and 3D models using CAD software
Support the design of aluminium glazing systems (e.g. curtain walling, windows, doors)
Work alongside senior engineers to interpret architectural specifications and drawings
Help produce manufacturing and fabrication drawings for production
Liaise with internal departments including manufacturing and installation teams
Ensure designs meet industry standards, regulations, and client requirements
Contribute to problem-solving and continuous improvement within the design process
Attend site visits when required to understand project requirements
What You Will Learn:
CAD design using a selection of software systems
Understanding of architectural glazing systems and façade engineering
Reading and interpreting construction drawings
Manufacturing processes including CNC-based production
Project coordination from design through to installation
Health & Safety and industry compliance standards
Training:
You will work towards a Level 3 Engineering & Manufacturing Support Technician Standard
You will study BTec Level 3 AME
Training Outcome:
Full time position upon completion of apprenticeship
Employer Description:Hadrian Architectural Glazing Systems is a UK-based company specialising in the design, manufacture, supply, and installation of architectural aluminium glazing systems. Established in 2000 and headquartered in the North East of England, the company operates nationwide, delivering projects across a wide range of sectors including commercial, residential, education, healthcare, and industrial developments.
The business provides a comprehensive, end-to-end service by controlling the entire project lifecycle in-house. This includes early-stage design and technical consultancy, detailed engineering, fabrication in its own manufacturing facility, and on-site installation by trained teams. This integrated approach allows Hadrian to maintain consistent quality, improve efficiency, and offer competitive pricing while meeting client specifications and regulatory requirements.
Hadrian produces a wide range of aluminium glazing products, such as windows, doors, curtain walling, roof glazing, façades, and bespoke structural glass solutions. These systems are used to enhance building aesthetics, improve natural light, and deliver performance benefits like thermal efficiency, acoustic insulation, and safety. The company also develops specialised solutions for demanding environments, such as secure glazing systems for healthcare settings.
Working closely with architects, contractors, developers, and consultants, Hadrian supports projects from concept through to completion. Its experienced design team collaborates with clients to create tailored solutions that meet both functional and architectural requirements. The company partners with leading system suppliers such as Schüco, Kawneer, and Reynaers, while also offering bespoke designs where standard systems are not suitable.
As part of the wider Hadrian Group, the company can provide complementary services alongside glazing, enabling a more streamlined delivery of construction projects. Overall, Hadrian Architectural Glazing Systems positions itself as a full-service provider of high-quality, customised aluminium glazing solutions, combining technical expertise, manufacturing capability, and installation services to deliver complex building projects efficiently and reliably.Working Hours :Monday - Thursday, 8.00am - 4.30pm and Friday, 8.00am - 3.30pm.Skills: Communication skills,IT skills,Attention to detail,Organisation skills,Customer care skills,Problem solving skills,Presentation skills,Administrative skills,Number skills,Analytical skills,Team working,Creative,Initiative....Read more...
Learning from experienced engineers and mentors within your site
Gaining hands-on skills in manufacturing engineering
Working towards a nationally recognised qualification
Working across our engineering function to gain a good fundamental knowledge of engineering at Compleat
Training:You will join us in September 2026 and throughout your 4-year apprenticeship, you will be working towards a Level 3 Engineering Technician (Mechatronics) qualification, designed to give you a strong foundation in both mechanical and electrical engineering.
In your first year, you’ll be based (live-in) in Coventry full-time, attending training Monday – Friday on-site at our leading training partner MGTS, where you’ll develop core technical skills in a hands-on, workshop-based environment.
From year two through to the end of your apprenticeship in year 4, you’ll spend the majority of your time at your assigned site, applying what you've learnt in real-world settings alongside experienced engineers in our manufacturing facilities. You’ll also return to MGTS periodically for further training and assessments as part of your qualification. Training Outcome:At Compleat, our engineering apprenticeship is the perfect launchpad for a dynamic career in engineering, innovation, and problem-solving. From day one, you'll be immersed in hands-on work that sharpens your technical skills and sets you on the path to a rewarding career. As you gain experience and demonstrate your expertise, you'll have the opportunity to deepen your skills across engineering and, with continued growth and development, you could eventually progress into senior engineering or management positions.Employer Description:At The Compleat Food Group, we’re proud to be a food business built on purpose and passion. Formed in 2021, we’re on a mission to create Food to Feel Good - great quality, tasty and affordable food that people love to eat.
We’re home to some of the UK’s most exciting and loved food brands, including Wall’s Pastry, Pork Farms, Wrights, The Real Yorkshire Pudding Co., unearthed, Vadasz, Squeaky Bean, Palace Culture, Julienne Bruno and Harvey & Brockless. Alongside our branded portfolio, we’re a leading supplier of delicious own-label pastry, sweet bakery, party food, olives and antipasti, added-value egg products, continental meats, dips and sauces and plant-based food to the UK’s major retailers, as well as across foodservice.
With over 6,300 talented colleagues across 18 sites, and an annual turnover of £1.4bn, we’re united by a shared ambition to shape the future of food for the better.
We are backed by European private equity firm PAI Partners. Working Hours :In your first year, you’ll be based (live in) in Coventry full-time, attending training Monday – Friday onsite at our partner MGTS. Towards the end of your apprenticeship, you may be moved onto one of your site’s shift patterns. Times TBC.Skills: Communication skills,IT skills,Attention to detail,Organisation skills,Problem solving skills,Number skills,Analytical skills,Logical,Team working,Initiative....Read more...
Learning from experienced engineers and mentors within your site.
Gaining hands-on skills in manufacturing engineering.
Working towards a nationally recognised qualification.
Working across our engineering function to gain a good fundamental knowledge of engineering at Compleat.
Training:You will join us in September 2026 and throughout your 4 year apprenticeship, you will be working towards a Level 3 Engineering Technician (Mechatronics) qualification, designed to give you a strong foundation in both mechanical and electrical engineering.
In your first year, you’ll be based (live in) in Coventry full-time, attending training Monday – Friday onsite at our leading training partner MGTS, where you’ll develop core technical skills in a hands-on, workshop-based environment.
From year two through to the end of your apprenticeship in year 4, you’ll spend the majority of your time at your assigned site, applying what you've learned in real-world settings alongside experienced engineers in our manufacturing facilities. You’ll also return to MGTS periodically for further training and assessments as part of your qualification.Training Outcome:At Compleat, our engineering apprenticeship is the perfect launchpad for a dynamic career in engineering, innovation, and problem-solving. From day one, you'll be immersed in hands-on work that sharpens your technical skills and sets you on the path to a rewarding career. As you gain experience and demonstrate your expertise, you'll have the opportunity to deepen your skills across engineering and with continued growth and development, you could eventually progress into senior engineering or management positions.Employer Description:At The Compleat Food Group, we’re proud to be a food business built on purpose and passion. Formed in 2021, we’re on a mission to create Food to Feel Good - great quality, tasty and affordable food that people love to eat.
We’re home to some of the UK’s most exciting and loved food brands, including Wall’s Pastry, Pork Farms, Wrights, The Real Yorkshire Pudding Co., unearthed, Vadasz, Squeaky Bean, Palace Culture, Julienne Bruno and Harvey & Brockless. Alongside our branded portfolio, we’re a leading supplier of delicious own-label pastry, sweet bakery, party food, olives and antipasti, added-value egg products, continental meats, dips and sauces and plant-based food to the UK’s major retailers, as well as across foodservice.
With over 6,300 talented colleagues across 18 sites, and an annual turnover of £1.4bn, we’re united by a shared ambition to shape the future of food for the better.
We are backed by European private equity firm PAI Partners. Working Hours :In your first year, you’ll be based (live in) in Coventry full-time, attending training Monday – Friday onsite at our partner MGTS. Towards the end of your apprenticeship, you may be moved onto one of your site’s shift patterns.Skills: Communication skills,IT skills,Attention to detail,Organisation skills,Problem solving skills,Number skills,Analytical skills,Logical,Team working,Initiative....Read more...
Learning from experienced engineers and mentors within your site
Gaining hands-on skills in manufacturing engineering
Working towards a nationally recognised qualification
Working across our engineering function to gain a good fundamental knowledge of engineering at Compleat
Training:You will join us in September 2026 and throughout your 4-year apprenticeship, you will be working towards a Level 3 Engineering Technician (Mechatronics) qualification, designed to give you a strong foundation in both mechanical and electrical engineering.
In your first year, you’ll be based (live-in) in Coventry full-time, attending training Monday – Friday on-site at our leading training partner MGTS, where you’ll develop core technical skills in a hands-on, workshop-based environment.
From year two through to the end of your apprenticeship in year 4, you’ll spend the majority of your time at your assigned site, applying what you've learnt in real-world settings alongside experienced engineers in our manufacturing facilities. You’ll also return to MGTS periodically for further training and assessments as part of your qualification.Training Outcome:At Compleat, our engineering apprenticeship is the perfect launchpad for a dynamic career in engineering, innovation, and problem-solving. From day one, you'll be immersed in hands-on work that sharpens your technical skills and sets you on the path to a rewarding career. As you gain experience and demonstrate your expertise, you'll have the opportunity to deepen your skills across engineering and, with continued growth and development, you could eventually progress into senior engineering or management positions.Employer Description:At The Compleat Food Group, we’re proud to be a food business built on purpose and passion. Formed in 2021, we’re on a mission to create Food to Feel Good - great quality, tasty and affordable food that people love to eat.
We’re home to some of the UK’s most exciting and loved food brands, including Wall’s Pastry, Pork Farms, Wrights, The Real Yorkshire Pudding Co., unearthed, Vadasz, Squeaky Bean, Palace Culture, Julienne Bruno and Harvey & Brockless. Alongside our branded portfolio, we’re a leading supplier of delicious own-label pastry, sweet bakery, party food, olives and antipasti, added-value egg products, continental meats, dips and sauces and plant-based food to the UK’s major retailers, as well as across foodservice.
With over 6,300 talented colleagues across 18 sites, and an annual turnover of £1.4bn, we’re united by a shared ambition to shape the future of food for the better.
We are backed by European private equity firm PAI Partners. Working Hours :In your first year, you’ll be based (live in) in Coventry full-time, attending training Monday – Friday onsite at our partner MGTS. Towards the end of your apprenticeship, you may be moved onto one of your site’s shift patterns. Times TBC.Skills: Communication skills,IT skills,Attention to detail,Organisation skills,Problem solving skills,Number skills,Analytical skills,Logical,Team working,Initiative....Read more...
Learning from experienced engineers and mentors within your site
Gaining hands-on skills in manufacturing engineering
Working towards a nationally recognised qualification
Working across our engineering function to gain a good fundamental knowledge of engineering at Compleat
Training:
You will join us in September 2026 and throughout your 4 year apprenticeship, you will be working towards a Level 3 Engineering Technician (Mechatronics) qualification, designed to give you a strong foundation in both mechanical and electrical engineering
In your first year, you’ll be based (live in) in Coventry full-time, attending training Monday - Friday onsite at our leading training partner MGTS, where you’ll develop core technical skills in a hands-on, workshop-based environment
From year two through to the end of your apprenticeship in year 4, you’ll spend the majority of your time at your assigned site, applying what you've learned in real-world settings alongside experienced engineers in our manufacturing facilities
You’ll also return to MGTS periodically for further training and assessments as part of your qualification
Training Outcome:
At Compleat, our engineering apprenticeship is the perfect launchpad for a dynamic career in engineering, innovation, and problem-solving
From day one, you'll be immersed in hands-on work that sharpen your technical skills and set you on the path to a rewarding career. As you gain experience and demonstrate your expertise, you'll have the opportunity to deepen your skills across engineering and with continued growth and development, you could eventually progress into senior engineering or management positions
Employer Description:At The Compleat Food Group, we’re proud to be a food business built on purpose and passion. Formed in 2021, we’re on a mission to create Food to Feel Good - great quality, tasty and affordable food that people love to eat.
We’re home to some of the UK’s most exciting and loved food brands, including Wall’s Pastry, Pork Farms, Wrights, The Real Yorkshire Pudding Co., unearthed, Vadasz, Squeaky Bean, Palace Culture, Julienne Bruno and Harvey & Brockless. Alongside our branded portfolio, we’re a leading supplier of delicious own-label pastry, sweet bakery, party food, olives and antipasti, added-value egg products, continental meats, dips and sauces and plant-based food to the UK’s major retailers, as well as across foodservice.
With over 6,300 talented colleagues across 18 sites, and an annual turnover of £1.4bn, we’re united by a shared ambition to shape the future of food for the better.
We are backed by European private equity firm PAI Partners. Working Hours :In your first year, you’ll be based (live in) in Coventry full-time, attending training Monday – Friday onsite at our partner MGTS. Towards the end of your apprenticeship, you may be moved onto one of your site’s shift patterns.Skills: Communication skills,IT skills,Attention to detail,Organisation skills,Problem solving skills,Number skills,Analytical skills,Logical,Team working,Initiative....Read more...
Learning from experienced engineers and mentors within your site.
Gaining hands-on skills in manufacturing engineering.
Working towards a nationally recognised qualification.
Working across our engineering function to gain a good fundamental knowledge of engineering at Compleat.
Training:You will join us in September 2026 and throughout your 4-year apprenticeship, you will be working towards a Level 3 Engineering Technician (Mechatronics) qualification, designed to give you a strong foundation in both mechanical and electrical engineering.
In your first year, you’ll be based (live in) in Coventry full-time, attending training Monday – Friday onsite at our leading training partner MGTS, where you’ll develop core technical skills in a hands-on, workshop-based environment.
From year two through to the end of your apprenticeship in year 4, you’ll spend the majority of your time at your assigned site, applying what you've learned in real-world settings alongside experienced engineers in our manufacturing facilities. You’ll also return to MGTS periodically for further training and assessments as part of your qualification.Training Outcome:At Compleat, our engineering apprenticeship is the perfect launchpad for a dynamic career in engineering, innovation, and problem-solving. From day one, you'll be immersed in hands-on work that sharpen your technical skills and sets you on the path to a rewarding career. As you gain experience and demonstrate your expertise, you'll have the opportunity to deepen your skills across engineering, and with continued growth and development, you could eventually progress into senior engineering or management positions.Employer Description:At The Compleat Food Group, we’re proud to be a food business built on purpose and passion. Formed in 2021, we’re on a mission to create Food to Feel Good - great quality, tasty and affordable food that people love to eat.
We’re home to some of the UK’s most exciting and loved food brands, including Wall’s Pastry, Pork Farms, Wrights, The Real Yorkshire Pudding Co., unearthed, Vadasz, Squeaky Bean, Palace Culture, Julienne Bruno and Harvey & Brockless. Alongside our branded portfolio, we’re a leading supplier of delicious own-label pastry, sweet bakery, party food, olives and antipasti, added-value egg products, continental meats, dips and sauces and plant-based food to the UK’s major retailers, as well as across foodservice.
With over 6,300 talented colleagues across 18 sites, and an annual turnover of £1.4bn, we’re united by a shared ambition to shape the future of food for the better.
We are backed by European private equity firm PAI Partners. Working Hours :In your first year, you’ll be based (live in) in Coventry full-time, attending training Monday – Friday onsite at our partner MGTS. Towards the end of your apprenticeship, you may be moved onto one of your site’s shift patterns.Skills: Communication skills,IT skills,Attention to detail,Organisation skills,Problem solving skills,Number skills,Analytical skills,Logical,Team working,Initiative....Read more...
Learning from experienced engineers and mentors within your site
Gaining hands-on skills in manufacturing engineering
Working towards a nationally recognised qualification
Working across our engineering function to gain a good fundamental knowledge of engineering at Compleat
Training:You will join us in September 2026 and throughout your 4 year apprenticeship, you will be working towards a Level 3 Engineering Technician (Mechatronics) qualification, designed to give you a strong foundation in both mechanical and electrical engineering.
In your first year, you’ll be based (live in) in Coventry full-time, attending training Monday – Friday onsite at our leading training partner MGTS, where you’ll develop core technical skills in a hands-on, workshop-based environment.
From year two through to the end of your apprenticeship in year 4, you’ll spend the majority of your time at your assigned site, applying what you've learned in real-world settings alongside experienced engineers in our manufacturing facilities. You’ll also return to MGTS periodically for further training and assessments as part of your qualification.Training Outcome:At Compleat, our engineering apprenticeship is the perfect launchpad for a dynamic career in engineering, innovation, and problem-solving. From day one, you'll be immersed in hands-on work that sharpen your technical skills and set you on the path to a rewarding career. As you gain experience and demonstrate your expertise, you'll have the opportunity to deepen your skills across engineering and with continued growth and development, you could eventually progress into senior engineering or management positions.Employer Description:At The Compleat Food Group, we’re proud to be a food business built on purpose and passion. Formed in 2021, we’re on a mission to create Food to Feel Good - great quality, tasty and affordable food that people love to eat.
We’re home to some of the UK’s most exciting and loved food brands, including Wall’s Pastry, Pork Farms, Wrights, The Real Yorkshire Pudding Co., unearthed, Vadasz, Squeaky Bean, Palace Culture, Julienne Bruno and Harvey & Brockless. Alongside our branded portfolio, we’re a leading supplier of delicious own-label pastry, sweet bakery, party food, olives and antipasti, added-value egg products, continental meats, dips and sauces and plant-based food to the UK’s major retailers, as well as across foodservice.
With over 6,300 talented colleagues across 18 sites, and an annual turnover of £1.4bn, we’re united by a shared ambition to shape the future of food for the better.
We are backed by European private equity firm PAI Partners. Working Hours :In your first year, you’ll be based (live in) in Coventry full-time, attending training Monday - Friday onsite at our partner MGTS. Towards the end of your apprenticeship, you may be moved onto one of your site’s shift patterns.Skills: Communication skills,IT skills,Attention to detail,Organisation skills,Problem solving skills,Number skills,Analytical skills,Logical,Team working,Initiative....Read more...
Learning from experienced engineers and mentors within your site.
Gaining hands-on skills in manufacturing engineering.
Working towards a nationally recognised qualification.
Working across our engineering function to gain a good fundamental knowledge of engineering at Compleat.
Training:You will join us in September 2026 and throughout your 4 year apprenticeship, you will be working towards a Level 3 Engineering Technician (Mechatronics) qualification, designed to give you a strong foundation in both mechanical and electrical engineering.
In your first year, you’ll be based (live in) in Coventry full-time, attending training Monday – Friday onsite at our leading training partner MGTS, where you’ll develop core technical skills in a hands-on, workshop-based environment.
From year two through to the end of your apprenticeship in year 4, you’ll spend the majority of your time at your assigned site, applying what you've learned in real-world settings alongside experienced engineers in our manufacturing facilities. You’ll also return to MGTS periodically for further training and assessments as part of your qualification.Training Outcome:At Compleat, our engineering apprenticeship is the perfect launchpad for a dynamic career in engineering, innovation, and problem-solving. From day one, you'll be immersed in hands-on work that sharpen your technical skills and set you on the path to a rewarding career. As you gain experience and demonstrate your expertise, you'll have the opportunity to deepen your skills across engineering and with continued growth and development, you could eventually progress into senior engineering or management positions.Employer Description:At The Compleat Food Group, we’re proud to be a food business built on purpose and passion. Formed in 2021, we’re on a mission to create Food to Feel Good - great quality, tasty and affordable food that people love to eat.
We’re home to some of the UK’s most exciting and loved food brands, including Wall’s Pastry, Pork Farms, Wrights, The Real Yorkshire Pudding Co., unearthed, Vadasz, Squeaky Bean, Palace Culture, Julienne Bruno and Harvey & Brockless. Alongside our branded portfolio, we’re a leading supplier of delicious own-label pastry, sweet bakery, party food, olives and antipasti, added-value egg products, continental meats, dips and sauces and plant-based food to the UK’s major retailers, as well as across foodservice.
With over 6,300 talented colleagues across 18 sites, and an annual turnover of £1.4bn, we’re united by a shared ambition to shape the future of food for the better.
We are backed by European private equity firm PAI Partners. Working Hours :In your first year, you’ll be based (live in) in Coventry full-time, attending training Monday – Friday onsite at our partner MGTS. Towards the end of your apprenticeship, you may be moved onto one of your site’s shift patterns.Skills: Communication skills,IT skills,Attention to detail,Organisation skills,Problem solving skills,Number skills,Analytical skills,Logical,Team working,Initiative....Read more...
Learning from experienced engineers and mentors within your site
Gaining hands-on skills in manufacturing engineering
Working towards a nationally recognised qualification
Working across our engineering function to gain a good fundamental knowledge of engineering at Compleat
Training:You will join us in September 2026 and throughout your 4 year apprenticeship, you will be working towards a Level 3 Engineering Technician (Mechatronics) qualification, designed to give you a strong foundation in both mechanical and electrical engineering.
In your first year, you’ll be based (live in) in Coventry full-time, attending training Monday - Friday onsite at our leading training partner MGTS, where you’ll develop core technical skills in a hands-on, workshop-based environment.
From year two through to the end of your apprenticeship in year 4, you’ll spend the majority of your time at your assigned site, applying what you've learned in real-world settings alongside experienced engineers in our manufacturing facilities. You’ll also return to MGTS periodically for further training and assessments as part of your qualification.Training Outcome:At Compleat, our engineering apprenticeship is the perfect launchpad for a dynamic career in engineering, innovation, and problem-solving. From day one, you'll be immersed in hands-on work that sharpen your technical skills and set you on the path to a rewarding career. As you gain experience and demonstrate your expertise, you'll have the opportunity to deepen your skills across engineering and with continued growth and development, you could eventually progress into senior engineering or management positions.Employer Description:At The Compleat Food Group, we’re proud to be a food business built on purpose and passion. Formed in 2021, we’re on a mission to create Food to Feel Good - great quality, tasty and affordable food that people love to eat.
We’re home to some of the UK’s most exciting and loved food brands, including Wall’s Pastry, Pork Farms, Wrights, The Real Yorkshire Pudding Co., unearthed, Vadasz, Squeaky Bean, Palace Culture, Julienne Bruno and Harvey & Brockless. Alongside our branded portfolio, we’re a leading supplier of delicious own-label pastry, sweet bakery, party food, olives and antipasti, added-value egg products, continental meats, dips and sauces and plant-based food to the UK’s major retailers, as well as across foodservice.
With over 6,300 talented colleagues across 18 sites, and an annual turnover of £1.4bn, we’re united by a shared ambition to shape the future of food for the better.
We are backed by European private equity firm PAI Partners. Working Hours :In your first year, you’ll be based (live in) in Coventry full-time, attending training Monday - Friday onsite at our partner MGTS. Towards the end of your apprenticeship, you may be moved onto one of your site’s shift patterns.Skills: Communication skills,IT skills,Attention to detail,Organisation skills,Problem solving skills,Number skills,Analytical skills,Logical,Team working,Initiative....Read more...
Safety, IATF & Laboratory Governance:
Follow all Health, Safety, Environmental and Quality procedures applicable to laboratory activities
Support laboratory activities in accordance with IATF 16949 laboratory requirements, working within defined procedures and under appropriate supervision
Learn to identify hazards and risks associated with laboratory testing and escalate concerns where necessary
Maintain laboratory standards through participation in 5S, equipment care and safe systems of work
Measurement, Inspection & Scanning Development:
Assist with dimensional inspection activities using coordinate measuring machines (CMMs), form tracers, 3D laser scanning systems and hand measurement equipment under supervision
Progressively develop skills in CMM operation and programming using Mitutoyo M-COSMOS and PC-DMIS software, supported by experienced engineers
Learn to operate and apply 3D laser scanning technologies for dimensional verification, surface analysis and comparison to CAD models, under supervision
Develop the ability to interpret 3D CAD data and engineering drawings to support measurement and scanning activities
Support the preparation of inspection, scanning and measurement reports, including ISIR documentation, for review and approval by a competent engineer
Develop an understanding of GD&T principles and support dimensional troubleshooting activities with guidance
Laboratory Competence & Measurement Control:
Learn to operate laboratory test equipment and instrumentation within defined competency and training limits
Support the use of calibrated and traceable equipment in accordance with laboratory procedures
Develop an understanding of measurement principles, equipment capability and basic calibration requirements, following defined test methods and work instructions and escalating where standards are unclear
Data Integrity, Analysis & Problem Solving:
Accurately record measurement and scanning data in line with laboratory documentation and data integrity requirements
Learn to analyse dimensional and scanning results, identify trends or anomalies and support root cause investigations under supervision
Assist with non-conformance investigation and corrective action activities in collaboration with Quality and Supplier Quality teams
Develop awareness of measurement system principles, including basic Measurement System Analysis (MSA)
Quality Engineering Exposure & Continuous Improvement:
Support Quality Engineering activities across multiple functions, including Receiving Inspection, Supplier Quality Assurance, New Product Introduction, Plant Quality and Warranty, as part of the apprenticeship development programme
Work with Production and Engineering teams to support measurement- and inspection-related process improvements where opportunities are identified
Participate in Kaizen and continuous improvement activities to enhance measurement, scanning and inspection effectiveness, efficiency and data reliability
Training:
1 day a week at college ( term time)
college assessor
work place mentor
Training Outcome:
After completion of apprenticeship progression within the company is available to other roles such as laboratory measurement engineer, quality laboratory technician and more
Employer Description:DENSO is a global company focused on advanced mobility that contributes to greater well-being and positively changes how the world moves. As a global Fortune 500 company, we have a broad product portfolio and widespread global impact.Working Hours :Monday - Thursday, 8.30am - 5.00pm and Friday, 8.30am - 3.30pm.Skills: Communication skills,Attention to detail,Organisation skills,Problem solving skills,Analytical skills,Logical,Team working....Read more...
6 - 12 months of product specific site based training on all aspects of transformer design and manufacture. This will include all areas of the business from the tender stage through to the final test
Maintenance, repair, installation and retrofit of the company's range of Tapchanger and Transformer products, both on site and in our Loughborough factory. The initial 12 months will be factory-based
Disassemble, overhaul, fault find, repair, rebuild Tapchanger’s, transformers both on-site and in-work as required
Work to specifications and technical requirements
Undergo training as necessary to ensure that current and future H&S requirements are met at all times
Work in accordance with on-site risk assessments on every assignment
Provide written reports on completion of each assignment
Following initial rotation across different departments within BRUSH Transformers, Apprentices will spend time in the Transformer Service Department with qualified and experienced Service Engineers, learning all aspects of maintenance, servicing, repairs, installation and commissioning of BRUSH Transformers. This will include travel and site visits. Following this, there will be additional opportunities for Apprentices to gain broader experience by working on servicing and commissioning in other parts of BRUSH Group such as BRUSH Power Solutions and Critical Infrastructure Solutions. This will involve national travel and overnight stays where required. Ultimately, this will open up additional career opportunities in Commissioning and Services across BRUSH Group as a whole, rather than exclusively within BRUSH Transformers.Training:
Primarily based in the workplace
Apprentices attend Loughborough College on block release to study Level 4 Higher National Certificate/Higher Technical Qualification in Engineering
Trainer / Assessor to visit in the workplace
Training Outcome:Potential progression into roles such as Field Service Engineer, Commissioning Engineer, Site Test Technician and eventually into Senior Service Engineer or Service Manager.Employer Description:We provide agile and adaptive engineering solutions and products, including consultancy services, design and project management as well as award-winning product technology, to a wide range of projects. Through innovation and a commitment to delivering solutions that address grid-resilience and drive system change, we support the global drive to net-zero, helping to future-proof critical infrastructure. Installed in some of the world’s most demanding applications, our range of transformer solutions are designed and built by our engineering experts using quality materials to our exacting standards. The result is products that deliver on performance, reliability and efficiency – time after time. Fully supported throughout their lifespan by our team of expert engineers, our designs abide by EU Regulation 548/2014 Tier 2, also known as EcoDesign Compliance, which legislates the efficiency of transformers. The range includes power transformers, special transformers and reactors, as well as tapchangers.Working Hours :Monday - Thursday, 7:30am - 4.00pm and Friday, 7:30am - 12:30pm.Skills: Communication skills,IT skills,Attention to detail,Organisation skills,Problem solving skills,Presentation skills,Number skills,Analytical skills,Logical,Team working,Creative....Read more...
This position requires a proactive and adaptable person who thrives in a dynamic environment, collaborates effectively with internal teams, and demonstrates a strong problem-solving aptitude.
What's in it for you?
Key Responsibilities
You will learn:
To maintain all mechanical and electrical equipment at the site, liaising with third party suppliers where appropriate, including (but not limited to) the vertical cable car, CCTV, heating / cooling (HVAC), AV / sound system, Fire systems, Intruder alarm systems, access control system etc.
To complete the daily start-up checks and cleaning for the vertical cable before the start of the daily operation (including climbing up ladders to reach the basement or top of the tower).
To support the Facilities and Maintenance manager when required with the management of a number of key third party facilities contracts including (but not limited to) Poma, remote monitoring/ security, CCTV, IT support and rope access to ensure they comply with the terms of service level agreements.
To collaborate with the Operational team, Sales team and Procurement Manager to ensure the smooth running of the operation.
To assist in the monitoring of all faults and any ride downtime.
To assist with the completion of the preventative maintenance schedule.
What we are looking for:
You will have the ability to react well under pressure and to stay calm and rational in emergency situations.
You will have the aptitude to learn new systems, understand technical manuals, and you will enjoy technical problem-solving and being an expert in systems.
You will be a team player with great communication skills, with a hands-on attitude, willing to muck in and to help out to make sure that the venue stays open, and the operation runs smoothly at all times.
You must be a self-starter who is able to work without direct day-to-day supervision, but equally you must be a team player able to work effectively with colleagues at i360, at our suppliers and the broader team.
A full passport with the right to travel to Europe without needing a visa.
This role requires a high level of physical fitness, as it involves manual handling and climbing on ladders. Therefore, you will be required to pass a fitness test, occupational health screening and medical assessment.
Do not apply directly to the company as all applications must be through SIGTA. You may not be considered if you apply direct.
For more info and video, visit our vacancies page at www sigta.co.uk/apprentice-vacancies/ Training Outcome:
To become a fully trained and qualified Engineering Maintenance Technician with Brighton i360.
Employer Description:The Brighton i360 is a leading visitor attraction in Brighton, offering unique experiences for guests of all ages. We aim to create unforgettable moments by delivering world-class service, innovative experiences, and seamless operations.Working Hours :Week 1: 5 days working / 2 days off.
Week 2: 7 days working / 7 days off. Shifts to be confirmed.Skills: Communication skills,Attention to detail,Organisation skills,Problem solving skills,Presentation skills,Number skills,Analytical skills,Logical,Team working,Initiative....Read more...
This role is ideal for individuals passionate about mechanics, problem-solving, and providing exceptional customer service.
Responsibilities:
Assist senior technicians in diagnosing, troubleshooting, and repairing various mechanical and electrical systems
Learn to perform routine maintenance tasks, including inspections, lubrication, and adjustments
Participate in equipment installations and upgrades under supervision
Develop proficiency in using diagnostic tools and equipment to identify issues accurately
Collaborate with team members to ensure timely completion of service requests and projects
Follow safety protocols and guidelines to maintain a safe working environment
Document service activities, including work performed, parts used, and customer interactions
Attend training sessions and workshops to enhance technical skills and product knowledge
Communicate effectively with customers to address inquiries, explain service procedures, and provide recommendations
Assist with inventory management, including tracking parts and supplies used during service operations
Training:Motor Vehicle Service and Maintenance Technician (light vehicle)Level 3 Apprenticeship Standard:
The programme lasts for at least 36 months (3 years) and you'll achieve a nationally recognised qualifications
All of our apprentices are employed through the dealer network and attend week-long block training at our state-of-the-art training centre in Coventry
Block training is complemented by a combination of regular coaching visits from one of our experienced coaches as well as virtual classroom sessions and E-learning modules
Your development is supported through your apprenticeship journey, with your learning focused towards achieving a qualification recognised across the motor industry. This will provide the foundation to develop your career, as there are lots of opportunities within our expanding dealer network to progress and move into new roles once you’ve successfully completed the programme
Before the Standard is met, all apprentices must hold a certificate that meets the EU’s 2014 F-gas regulation
Training Outcome:
There are lots of opportunities within our expanding dealer network to progress and move into new roles once you’ve successfully completed the programme
Employer Description:Baylis Motor Group was established in 1994, when Michael Baylis purchased the Gloucester branch of Vauxhall retailer Skipper. Since then, Baylis has grown to become one of the largest and most trusted motor groups across Gloucestershire, Herefordshire, Worcestershire and South Wales. In January 2022, we expanded into South Wales by acquiring the Vauxhall franchise in Merthyr Tydfil from Southern (Merthyr) Ltd, increasing our network.
Our Comittment - We’ve continuously invested in our sites with complete refurbishments and new, purpose-built facilities.From modern showrooms and comfortable customer areas to advanced workshops and body repair centers, every Baylis location is designed to deliver the best experience for our customers and staff alike.Working Hours :Monday - Friday, 8.30am - 5.30pm.Skills: Communication skills,IT skills,Attention to detail,Organisation skills,Problem solving skills,Analytical skills,Team working....Read more...
This role is ideal for individuals passionate about mechanics, problem-solving, and providing exceptional customer service.
Responsibilities:
Assist senior technicians in diagnosing, troubleshooting, and repairing various mechanical and electrical systems
Learn to perform routine maintenance tasks, including inspections, lubrication, and adjustments
Participate in equipment installations and upgrades under supervision
Develop proficiency in using diagnostic tools and equipment to identify issues accurately
Collaborate with team members to ensure timely completion of service requests and projects
Follow safety protocols and guidelines to maintain a safe working environment
Document service activities, including work performed, parts used, and customer interactions
Attend training sessions and workshops to enhance technical skills and product knowledge
Communicate effectively with customers to address inquiries, explain service procedures, and provide recommendations
Assist with inventory management, including tracking parts and supplies used during service operations
Training:Motor Vehicle Service and Maintenance Technician (light vehicle)Level 3 Apprenticeship Standard:
The programme lasts for at least 36 months (3 years) and you'll achieve a nationally recognised qualifications
All of our apprentices are employed through the dealer network and attend week-long block training at our state-of-the-art training centre in Coventry
Block training is complemented by a combination of regular coaching visits from one of our experienced coaches as well as virtual classroom sessions and E-learning modules
Your development is supported through your apprenticeship journey, with your learning focused towards achieving a qualification recognised across the motor industry. This will provide the foundation to develop your career, as there are lots of opportunities within our expanding dealer network to progress and move into new roles once you’ve successfully completed the programme
Before the Standard is met, all apprentices must hold a certificate that meets the EU’s 2014 F-gas regulation
Training Outcome:There are lots of opportunities within our expanding dealer network to progress and move into new roles once you’ve successfully completed the programme.Employer Description:Baylis Motor Group was established in 1994, when Michael Baylis purchased the Gloucester branch of Vauxhall retailer Skipper. Since then, Baylis has grown to become one of the largest and most trusted motor groups across Gloucestershire, Herefordshire, Worcestershire and South Wales. In January 2022, we expanded into South Wales by acquiring the Vauxhall franchise in Merthyr Tydfil from Southern (Merthyr) Ltd, increasing our network.
Our Comittment - We’ve continuously invested in our sites with complete refurbishments and new, purpose-built facilities.From modern showrooms and comfortable customer areas to advanced workshops and body repair centers, every Baylis location is designed to deliver the best experience for our customers and staff alike.Working Hours :Monday - Friday, 8.30am - 5.30pm.Skills: Communication skills,IT skills,Attention to detail,Organisation skills,Problem solving skills,Analytical skills,Team working....Read more...
Key Responsibilities
Develop Change Implementation Strategies, Including:
The successful execution of communication plans
Facilitating User Acceptance Testing
Rolling out training and support for business changes
Risk identification and mitigation
Quality Assurance and Control:
Support the Project Management Team in transitioning the deliverables of major projects to BAU, implementing change management strategies to ensure smooth transitions
Coordinate with relevant stakeholders, both internal and external, to plan for and execute smooth integration for new systems and processes
Monitor change progress and identify potential risks to BAU adoption
Identify and address issues that arise during change implementation
Creating and updating user guides, FAQs, and support content for both customers and internal teams
Conduct post-implementation ‘benefit reviews’ to identify lessons learned, best practices, and report on benefit success metrics
Develop and maintain implementation documentation
Support the Business Improvement Manager in implementing minor projects
Other Responsibilities:
Contribute to lessons learned activities to support continuous improvement
Assist with the evaluation of internal platforms and tools
Carry out administrative duties associated with assigned tasks
Develop and maintain in-depth knowledge of TQUK products and services and an understanding of TQUK’s internal processes and the wider education landscape
Engage with any TQUK communications such as internal updates, newsletters, policy updates or Centre information
Assist with internal platform training as required
Represent TQUK at events, meetings and forums as required
Undertake other duties considered within your skill and competence to assist in the smooth running of the business as required
Training:
Training will be with Swarm Training, a national apprenticeship provider in the UK
The successful candidate will work towards a Level 3 Improvement Technician apprenticeship, which takes 12-18 months to complete
The apprentice must complete a minimum of 6 hours per week during working hours, with monthly training sessions conducted by a tutor (usually via video), with tasks assigned to be completed during those hours
Training Outcome:
Progression possible in a fast growing established company with the possibility also of going on to the next apprenticeship
Employer Description:Training Qualifications UK (TQUK) is one of the fastest-growing Awarding Organisations in the UK and a leading End-Point Assessment Organisation. Working with over 500 schools, colleges universities, and training providers worldwide, helping over 150,000 learners achieve their qualifications every year.,
As they continue to grow quickly in a fast-paced and regulated environment, they are looking for an Implementation Officer to support our team in making change happen. This could include delivering new systems into business as usual, supporting the delivery of major projects, and leading on the delivery of smaller projects and changes throughout the business.Working Hours :Monday to Friday, day shift 08:30 - 17:00.
Hybrid depending on work needs i.e. 2-3 days.Skills: IT skills,Attention to detail,Problem solving skills,Analytical skills,Logical,Team working,Initiative....Read more...
JOB DESCRIPTION
The QA Technical Service Rep is responsible for the timely delivery of services as they relate to the quality assurance of Tremco's installed roofing systems within their respective region.
$20-33/hour (not including prevailing wage)
Benefits, upon satisfaction of applicable eligibility requirements, include but are not limited to:
401K with company match Company Pension Plan Health Insurance Paid time-off Mileage reimbursement Continuing education
Duties/Responsibilities, Core knowledge:
Lead Technician performing roof patch and repair as necessary and determined by the Quality Assurance Group on Tremco Incorporated roof systems (BUR, Modified Bitumen, Single Ply, Fluid Applied, etc.). Estimate material and labor quantities for roof patch and repair. Work with local WTI Field Representatives and/or Supervisors as required or necessary. Provide accurate and timely documentation to ensure that all work was completed properly and that the customer is fully satisfied. Conduct and foster professional and timely communication (via email, voicemail, in person) with the customers, sales reps, field staff, and internal company personnel on all work-related matters. Demonstrate working knowledge of all services provided. Perform any other duty and/or project as required or assigned by the QA Assurance Group.
Skills, Qualifications, Experience, Special Physical Requirements:
High school diploma or GED Prior roofing experience including patch and repair skills Knowledge and ability to use basic tools associated with commercial roofing Knowledge and experience monitoring and maintaining Quality Control Functional computer skills Safety training and OSHA knowledge with a commitment to safety at all times Understanding and ability to manage expenses Planning and organizational skills. Able to juggle multiple priorities and demonstrate good task management Work independently, as well as in a team environment, to solve problems and delegate assignments Excellent customer service skills and ability to build relationships Ability to climb up and down interior/exterior ladders to access roofs (minimum of 20 ft) and carry basic hand tools, equipment and/or material up to approx. 100 lbs. over long distances Capable of walking along roof top edges (no fear of heights, good balance, etc.) Ability to handle prolonged exposure to outside weather conditions (heat, cold, etc.) Ability to travel out of town including overnight travel Must have transportation and a valid driver's license Ability to work weekends and/or holidays if needed Ability to pass pre-employment drug test Ability to read, write and speak English The hourly rate for applicants in this position generally ranges between $20 and $33. This range is an estimate, based on potential employee qualifications, operations, needs, and other considerations permitted by law. Qualified applicants will receive consideration for employment without regard to their race, color, religion, national origin, sex, sexual orientation, gender identity, protected veteran status or disability.Apply for this ad Online!....Read more...
You will support the creative team by primarily preparing accurate customer proofs quickly and efficiently, ensuring they meet customer expectations. As you progress, you will be trained to transform proofs into artwork for print and contribute to moodboards, creative designs, website imagery, and social media assets. This role is ideal for someone with strong attention to detail, a passion for design, and a reliable work ethic, as these qualities will open opportunities to grow into a wider range of creative projects within the team.
- Assist in creating accurate customer proofs- Support artwork preparation for print projects- Contribute to creative moodboards and design concepts- Assist in producing digital assets for websites and social media- Maintain accurate records of design work and file management- Work collaboratively with designers and account managers- Keep a clean, organised, and professional working environment
It is essential that the successful candidate is computer literate, with experience using the Adobe Creative Suite particularly Adobe Illustrator (AI), Adobe Photoshop, and working confidently with EPS files. The candidate must also be able to read, write, and communicate effectively, using core computer skills to collaborate with colleagues and complete daily tasks.Training:The apprenticeship will be completed onsite at Involution's headquarters (LS16) supported by the company and BPIF Training.
Training will take place during standard office hours, Monday to Thursday (8:00am- 4:30pm) and Friday (8:00am- 4:00pm).
On-the-job training is provided to ensure all core requirements of the role are met but it is critical for experience in using Photoshop and Illustrator. Depending on the candidate's existing skillset, there will also be opportunities to gain more advanced experience through additional training with our creative team.
The BPIF apprenticeship programme is structured around eight key training blocks, each focusing on a core pillar of pre-press and print production.Training Outcome:We hope that upon completing the apprenticeship, the candidate will choose to join Involution full‑time as a member of our creative team. Alternatively, they may decide to continue developing their skillset and progress further through the apprenticeship pathway via Involution.
We are committed to supporting the candidate throughout their journey and will work closely with them to identify the route that best aligns with their long‑term career goals at Involution.
For job enrichment, career progression will involve taking on increasingly complex print projects, gaining greater creative ownership, and expanding technical capability. In the longer term, there may also be opportunities to mentor and support future apprentices as part of their development within the team.Employer Description:Due to continued business growth and expansion, we are looking to recruit a Pre-Press Technician to join our creative team at Involution. We are a Leeds based promotional clothing and merchandise company. This is an exciting opportunity for a recent college graduate or someone starting their career in design, with training provided to develop skills in customer proofs, print setup, and digital creative assets.Working Hours :Monday- Thursday
8:00am- 4:30pm
Friday
8:00am- 4:00pm
We offer some flexibility around start and finish times, provided the full day shift is completed. Final arrangements can be agreed with the employer to support a healthy work life balance.Skills: Communication skills,IT skills,Attention to detail,Organisation skills,Team working,Creative,Initiative,Non judgemental,Patience,Photoshop,Illustrator....Read more...
To maintain consistent and documented compliance with all relevant Safety, Health and Environmental (SHE), Good Manufacturing Practice (GMP), Data Integrity (DI), quality and best practice requirements
To plan and prioritise tasks, review and evaluate progress against objectives and investigate alternative scenarios
To identify and understand the requirements of internal and external customers and use creative thinking and problem solving to challenge assumptions, innovate, make new proposals and build on existing ideas
To analyse scientific data from various sources to improve understanding of the underlying processes
To assist other technical staff in the acquisition, visualisation and analysis of scientific data
To develop and implement procedures for the standardised acquisition and storage of data from the laboratory
To work autonomously to analyse, interpret and evaluate scientific data and present the results of an analysis clearly and concisely in written and oral form, including dissemination of work at internal/external events
To assist in the networking and automation of laboratory equipment
To assist in the integration of processes and equipment into CPI digital infrastructure, with a focus on data acquisition, control and automation. Additionally to ensure interoperability with systems such as those for inventory management and resource planning
To contribute to the development of specific technical projects and have a working knowledge of project management procedures; set up, planning and the execution of data analysis projects and report results within agreed timescales with the support of colleagues
To promote and ensure the application of quality standards relevant to the workplace and comply with the internal and external regulatory environment such as procurement, maintaining records, traceability & confidentiality
To share professional knowledge with colleagues and be responsible for own continuous professional development
To contribute to a culture of continuous performance improvement within the scientific and technical environment in alignment with company strategy and project deliverables
Training Outcome:Automation or Digital Technician / Junior Engineer
Focus:
Maintaining and optimising automated systems
Supporting PLCs, sensors, robotics, SCADA, or MES systems
Basic coding or scripting (e.g. ladder logic, Python, SQL)
Monitoring data, dashboards, and system performance
Fault finding and continuous improvement support
Automation Engineer / Digital Engineer
Focus:
Designing, programming, and commissioning automation solutions
Developing digital tools, dashboards, or data pipelines
Integrating hardware and software systems
Applying cybersecurity and data integrity principles
Leading small projects or system upgrades
Senior Automation Engineer / Digital Specialist
Focus:
Owning complex or business‑critical systems
Leading automation or digital projects
Setting technical standards and best practices
Mentoring apprentices and junior engineers
Driving efficiency, quality, and uptime improvements
Employer Description:At CPI we work with our partners to translate inventions into products and processes that enhance health and well-being, protect and improve our environment and increase productivity across industries. With a deep understanding of innovation processes and funding, outstanding technical expertise and industry relevant assets, we enable products and processes to be quickly and cost-effectively brought to market.Working Hours :Monday- Friday 08:30am- 5:00pm and Friday 08:30am- 4:30pmSkills: Communication skills,IT skills,Attention to detail,Organisation skills,Customer care skills,Problem solving skills,Presentation skills,Analytical skills,Logical,Team working,Creative,Initiative,Non judgemental,Patience....Read more...
