An opportunity has arisen for a UPS Engineer to join is a specialist power solutions provider, delivering installation, servicing and maintenance of critical backup systems across a range of industries throughout the UK.
As a UPS Engineer, you will be responsible for installing, maintaining and fault-finding on UPS systems across client sites, primarily in southern and central England.
Location: Ideal candidates will be based anywhere between Oxford and the South of England, including counties such as Oxfordshire, Berkshire, Buckinghamshire, Hampshire, Surrey, West Sussex, East Sussex, Kent, Greater London, Wiltshire, Gloucestershire, Somerset, Middlesex
You will be responsible for:
* Attending client sites to carry out service, repair and fault diagnosis on UPS systems and associated equipment
* Supporting installations and commissioning of UPS and battery systems
* Performing battery impedance tests and replacements
* Conducting load bank testing, site surveys and standby power inspections
* Providing breakdown support and troubleshooting for critical electrical systems
* Supervising subcontractors and apprentices during on-site works
* Assisting the project and sales teams with technical input and resource estimates
* Documenting electrical test results and compliance paperwork
What we are looking for:
* Previously worked as a UPS Engineer, Field Service Engineer, Power Systems Engineer, Electrical Engineer, Critical Power Engineer, Uninterruptible Power Supply Engineer, Battery Systems Engineer, Service & Maintenance Engineer, Electrical Field Engineer, UPS Installation Engineer, Backup Power Engineer, Site Service Engineer, Commissioning Engineer, Emergency Power Engineer, Power Electronics Engineer, Electrician
* Proven experience of servicing and installing Uninterruptible Power Supply (UPS) systems
* 18th Edition or equivalent electrical qualification
* Willingness to travel nationally and stay overnight where required (expenses covered)
* Valid CSCS or ECS card
* Full UK Driving Licence
What's on offer:
* Competitive salary
* Door-to-door pay
* Overtime opportunities
* Flexible start and finish times,
* 25 days annual leave plus Bank Holidays
* Company van and fuel expenses
* Pension scheme
* On-site parking
* Ongoing training and development
This is a fantastic opportunity for a UPS engineer to join a growing team in a rewarding, field-based engineering role.
Important Information: We endeavour to process your personal data in a fair and transparent manner. In applying for this role, Additional Resources will be acting in your best interest and may contact you in relation to the role, either by email, phone, or text message. For more information see our Privacy Policy on our website. It is important you are aware of your individual rights and the provisions the company has put in place to protect your data. If you would like further information on the policy or GDPR please contact us.
Additional Resources Ltd is an Employment Business and an Employment Agency as defined within The Conduct of Employment Agencies & Employment Businesses Regulations 2003.
....Read more...
The Company:
UK manufacturer of single use medical devices
Global reach
Outstanding reputation for service and product quality
Looks after their employees
Benefits of the Validation Engineer
£45k basic salary,
Death in Service (2 x Salary),
Employer Pension @ 5% employer + 5% employee,
23 Days annual leave + bank holidays,
Health Shield - Employee Health Cash Plan,
Perkbox
The Role of the Validation Engineer
Our client is a leading medical devices manufacturer
This role is to ensure all site validation needs are met
You will be responsible for validating all production, service provision, computer and software-based processes, the result of which cannot be verified by subsequent monitoring or measurement.
Validation must demonstrate the ability of these processes to consistently achieve expected results. The role includes re-validation of established processes as well as initial validation of amended or new processes, such as those introduced through new product development activities.
Creating Validation Master Plans and associated protocols
Create or amend standard operating procedures in accordance with the results of the validation
Creating validation and related working forms
Supporting site cross-functional technical writing needs
Maintenance of Sterilisation Validation for both Gamma and Ethylene Oxide processes.
Assist in the implementation of the validation protocols and write the validation reports
Support cross-functional risk management activities
Support in the optimization of production processes
Preparation of plans for maintenance, service, calibration, re-validation and cleaning of test and production equipment
Policing and coordinating maintenance, service, calibration, re-validation and cleaning
Advise the business on current best practice in validation and keep abreast of changes
Contribute to continuous improvement projects
The Ideal Person for the Validation Engineer
Must hold a mechanical engineering or electrical engineering degree
Must have previous experience of medical device or pharmaceutical manufacturing
Must have practical experience in manufacturing technology and quality assurance
Must have understanding of Quality Management Systems for medical
Devices (EN ISO 13485, 21 CFR 820)
Experience in validation / qualification
Experience in Project Work and/or Project Management D
Good to very good knowledge of common MS Office
Programs
Able to adhere to and communicate the company values
Must have strong communication skills able to communicate with all levels of organisation
A good team player who is able to adapt to working independently or with new or short-term teams
If you think the role of Validation Engineer is for you, apply now!
Consultant: David Gray
Email: davidg@otrsales.co.uk
Tel no. 0208 397 4114
Candidates must be eligible to work and live in the UK.
About On Target
At On Target, we specialise in sales, technical and commercial jobs in the Engineering, Construction, Building Services, Medical & Scientific, and Commercial & Industrial Solutions sectors, enabling our consultants to become experts in their market sector. We place all levels of personnel, up to Director across the UK and internationally.....Read more...
Structural Engineer
Glasgow
£50,000 - £70,000 + Progression + Training + Qualifications + Great Environment + Great package + Immediate start
Unmissable opportunity for a motivated Structural Engineer to join this rapidly growing company who is offering training to further develop your skill set, support of further qualifications and natural progression up the ladder if wanted. If you are looking for the opportunity to create your future and take your career to the next level this is the right company for you.
This well established manufacturer is looking for a Structural Engineer to make a difference to their growing team within materials. Be part of a team where you can learn while earning a great salary that will progress over time!
This Structural Engineer role will include:
* Structural Engineer role (materials) * Attend site inspections and technical meetings * Developing product specs using CAD (Materials) * Training and progression The Successful Structural Engineer will have:* Background as a Structural Engineer or similar * Relevant degree - structural or civil * Experience with CAD and developing specs * Experience within manfuacturing / materials ideal * Live commutable to Glasgow
Please apply to this advert or contact Georgia Daly for more information on 07458163040.
Keywords: structural engineer, design, technician, consultancy, construction, glasgow, edinburgh, paisley, falkirk
This vacancy is being advertised by Future Engineering Recruitment Ltd. The services of Future Engineering Recruitment Ltd are that of an Employment Agency. Future Engineering Recruitment Ltd can only accept applications from candidates who have a valid legal permit or right to work in the United Kingdom. Potential candidates who do not have this right or permit, or are pending an application to obtain this right or permit should not apply as your details will not be processed. We will endeavour to respond to all applicants however due to the sheer volume of response, we can only guarantee that candidates who have been shortlisted will be contacted ....Read more...
Design Engineer
Glasgow
£50,000 - £70,000 + Training + Qualifications + Chartership + Great Environment + Great package + Immediate start
Unmissable opportunity for a motivated Design Engineer to join this rapidly growing company who is offering training to further develop your skill set, support of further qualifications and natural progression up the ladder if wanted. If you are looking for the opportunity to create your future and take your career to the next level this is the right company for you.
This well established manufacturer is looking for a Design Engineer to make a difference to their growing team within materials. Be part of a team where you can learn while earning a great salary that will progress over time!
This Design Engineer role will include:
* Design Engineer role (materials) * Attend site inspections and technical meetings * Developing product specs using CAD (Materials) * Training and qualifications can be gained, including chartership! The Successful Design Engineer will have:* Background as a Design Engineer or similar * Relevant degree - structural / civil / mechanical * Experience with CAD and developing specs * Experience within manfuacturing / materials ideal * Live commutable to Glasgow
Please apply to this advert or contact Georgia Daly for more information on 07458163040.
Keywords: design engineer, structural, technician, consultancy, construction, glasgow, edinburgh, paisley, falkirk
This vacancy is being advertised by Future Engineering Recruitment Ltd. The services of Future Engineering Recruitment Ltd are that of an Employment Agency. Future Engineering Recruitment Ltd can only accept applications from candidates who have a valid legal permit or right to work in the United Kingdom. Potential candidates who do not have this right or permit, or are pending an application to obtain this right or permit should not apply as your details will not be processed. We will endeavour to respond to all applicants however due to the sheer volume of response, we can only guarantee that candidates who have been shortlisted will be contacted ....Read more...
The Test Engineer will join a Systems Engineering team critical in space thruster engine development. You will work on a complex, multifaceted rocket engine system comprised of numerous newly developed and integrated components. This role has wide ranging technical input including structural, thermal, rocket propulsion, space electronics, software, testing and systems analysis.
In essence as a Senior Systems Engineer, you will coordinate and bring together the diverse sub components and sub assembles into a complete working space engine design.
My client supplies chemical propulsion rocket engines and thrusters serve to key spacecraft manufacturers for commercial, defence and scientific applications.
Requirements
Space systems experience ideally of large European space projects, system primes or ESA.
Technical leadership of large, multidisciplinary Electrical Harnessing Design, routing and schematic Mechanical and fluidic system Engineering projects.
System Analysis knowledge to apply to, fluidic systems, surge pressure and pressure drop. Performance, Structural, Thermal, Reliability, Radiation Assessment, Hazard or Safety Analysis.
Complex product development experience of thermal design and equipment selection using Failure Modes Effects and Criticality Analysis (FMECA).
Intelligent, logical approach to problem solving.
Degree, Masters or higher qualification in Engineering, Aerospace, Mechanical or Electrical Engineering.
You will own the overall engine system architecture, analysis and documentation including FMECAs, radiation, reliability, mechanical, thermal, fluidic, electromagnetic, Design, Development and Verification Plan, Design Justification Document, Software Requirements Specification, Engine Test Plan etc. Working closely with the Project Manager to help plan and organise resources.
Responsibilities
Support propulsion engine build, assembly and test development including route card build sequences and system assembly, integration, Manufacturing and Inspection Flow Charts.
Review, interpret, manage and own the spacecraft requirements then disseminate down to relevant engine subsystem or component teams.
Coordinate of top level Design, Verification and Compliance Matrix.
Internally digest key subsystem and component review documentation ensuring work is completed to required standards and all aspects of the engine system are correctly aligned.
Lead customer interactions and engine level reviews also manage supplier technical queries in conjunction with the appropriate resource.....Read more...
Mobile Fabric Maintenance Engineer – FM Service Provider- SE Postcodes - up to £34,000 + Package Are you a Mobile Fabric Engineer looking for a new challenge?Do you live in a postcode of SE?Would you like to work for a leading Facilities Maintenance provider? An exciting opportunity to join an established Building Services company based across all of the SE postcodes. CBW Staffing Solutions are currently recruiting for a Mobile Fabric Engineer to carry out planned and reactive commercial maintenance across a retail contract based in SE postcode area. The successful candidate will have a strong understanding of Facilities Maintenance and have a proven track record in commercial building maintenance.This position would be ideal for a Mobile Maintenance Engineer currently in a similar position who is keen on progression. In return, the company is offering a competitive salary of up to £34,000 with a potential route into further career progression. Key Duties & ResponsibilitiesAbility to deliver excellent customer serviceTo undertake basic “Fabric duties” which would include touching up paintwork, tightening hinges, install/repair blinds, changing locks , making minor repairs to cabinets, desks, and putting together small equipment like chairs etc.To undertake some plumbing activities including but not limited to clearing blockages, attending to burst pipes, replacing components, servicing systems etc.Painting and DecoratingAssist with office moves (minor office churn) including furniture moversLiaising with the contract management teamInvestigating complaints and taking appropriate actionEnsuring feedback is provided to the helpdesk on the progress of M&E jobsCarry out specialist technical and non-technical work as deemed appropriate to the continuing maintenance function on the client portfolioOffer technical support and backup as requiredEnsure all personnel and contractors that may be working in hazardous areas take all safety measures to prevent danger, avoid injury and prevent damage to equipmentUse all relevant tools and equipment within the safety guidelines as necessary for the completion of worksTo ensure the client receives the highest level of service to their assets by carrying out reactive and planned maintenance, minor improvementsEnsure jobs are completed to a high standardAssist Multi-Skilled Engineers where requiredHours of Work & Package InformationBasic Salary of up to £34,0001 in 4 Call Out Rota - £15 per day standby allowanceMonday – Friday 08:00am – 17:00pm25 days holiday + Bank HolidaysCompany Van & Fuel CardTablet & Work Phone ProvidedFull company uniformRequirementsMust be able to provide copies of your trade certificatesA proven track record in commercial building maintenanceMulti-skilledGood communication skillsIf you are interested in the role, please send a copy of your cv to Charlie Long @ CBW staffing solutions!....Read more...
Mobile Fabric Maintenance Engineer – FM Service Provider- DA Postcodes - up to £32,000 + Package Are you a Mobile Fabric Engineer looking for a new challenge?Do you live in a postcode of DA?Would you like to work for a leading Facilities Maintenance provider? An exciting opportunity to join an established Building Services company based across all of the DA postcodes. CBW Staffing Solutions are currently recruiting for a Mobile Fabric Engineer to carry out planned and reactive commercial maintenance across a retail contract based in DA postcode area. The successful candidate will have a strong understanding of Facilities Maintenance and have a proven track record in commercial building maintenance.This position would be ideal for a Mobile Maintenance Engineer currently in a similar position who is keen on progression. In return, the company is offering a competitive salary of up to £32,000 with a potential route into further career progression. Key Duties & ResponsibilitiesAbility to deliver excellent customer serviceTo undertake basic “Fabric duties” which would include touching up paintwork, tightening hinges, install/repair blinds, changing locks , making minor repairs to cabinets, desks, and putting together small equipment like chairs etc.To undertake some plumbing activities including but not limited to clearing blockages, attending to burst pipes, replacing components, servicing systems etc.Painting and DecoratingAssist with office moves (minor office churn) including furniture moversLiaising with the contract management teamInvestigating complaints and taking appropriate actionEnsuring feedback is provided to the helpdesk on the progress of M&E jobsCarry out specialist technical and non-technical work as deemed appropriate to the continuing maintenance function on the client portfolioOffer technical support and backup as requiredEnsure all personnel and contractors that may be working in hazardous areas take all safety measures to prevent danger, avoid injury and prevent damage to equipmentUse all relevant tools and equipment within the safety guidelines as necessary for the completion of worksTo ensure the client receives the highest level of service to their assets by carrying out reactive and planned maintenance, minor improvementsEnsure jobs are completed to a high standardAssist Multi-Skilled Engineers where requiredHours of Work & Package InformationBasic Salary of up to £32,0001 in 4 Call Out Rota - £15 per day standby allowanceMonday – Friday 08:00am – 17:00pm25 days holiday + Bank HolidaysCompany Van & Fuel CardTablet & Work Phone ProvidedFull company uniformRequirementsMust be able to provide copies of your trade certificatesA proven track record in commercial building maintenanceMulti-skilledGood communication skillsIf you are interested in the role, please send a copy of your cv to Ben Miller @ CBW staffing solutions!....Read more...
Mobile Fabric Maintenance Engineer – FM Service Provider- ME Postcodes - up to £32,000 + Package Are you a Mobile Fabric Engineer looking for a new challenge?Do you live in a postcode of ME?Would you like to work for a leading Facilities Maintenance provider? An exciting opportunity to join an established Building Services company based across all of the ME postcodes. CBW Staffing Solutions are currently recruiting for a Mobile Fabric Engineer to carry out planned and reactive commercial maintenance across a retail contract based in ME postcode area. The successful candidate will have a strong understanding of Facilities Maintenance and have a proven track record in commercial building maintenance.This position would be ideal for a Mobile Maintenance Engineer currently in a similar position who is keen on progression. In return, the company is offering a competitive salary of up to £32,000 with a potential route into further career progression. Key Duties & ResponsibilitiesAbility to deliver excellent customer serviceTo undertake basic “Fabric duties” which would include touching up paintwork, tightening hinges, install/repair blinds, changing locks , making minor repairs to cabinets, desks, and putting together small equipment like chairs etc.To undertake some plumbing activities including but not limited to clearing blockages, attending to burst pipes, replacing components, servicing systems etc.Painting and DecoratingAssist with office moves (minor office churn) including furniture moversLiaising with the contract management teamInvestigating complaints and taking appropriate actionEnsuring feedback is provided to the helpdesk on the progress of M&E jobsCarry out specialist technical and non-technical work as deemed appropriate to the continuing maintenance function on the client portfolioOffer technical support and backup as requiredEnsure all personnel and contractors that may be working in hazardous areas take all safety measures to prevent danger, avoid injury and prevent damage to equipmentUse all relevant tools and equipment within the safety guidelines as necessary for the completion of worksTo ensure the client receives the highest level of service to their assets by carrying out reactive and planned maintenance, minor improvementsEnsure jobs are completed to a high standardAssist Multi-Skilled Engineers where requiredHours of Work & Package InformationBasic Salary of up to £32,0001 in 4 Call Out Rota - £15 per day standby allowanceMonday – Friday 08:00am – 17:00pm25 days holiday + Bank HolidaysCompany Van & Fuel CardTablet & Work Phone ProvidedFull company uniformRequirementsMust be able to provide copies of your trade certificatesA proven track record in commercial building maintenanceMulti-skilledGood communication skillsIf you are interested in the role, please send a copy of your cv to Ben Miller @ CBW staffing solutions!....Read more...
An exciting opportunity has arisen for a Senior Design Engineer to join a pioneering UK-based specialist in military communications technology, located in Letchworth Garden City.
This is a hands-on, multifaceted engineering role ideally suited to an experienced and adaptable electronics professional who enjoys working across the full product lifecycle. You will be supporting high-reliability products used in marine and sub-marine low/very-low frequency (VLF/LF) communications, a field in which the company is globally recognised as a leader.
Key Responsibilities for the Senior Design Engineer based in Letchworth, Hertfordshire:
Design and modify RF-based electronic assemblies for VLF/LF communication systems.
Oversee projects from concept through to production and delivery.
Manage sub-suppliers for components and mechanical services (box-build, machining, etc.).
Investigate and diagnose faults at component and trace level on new and field-returned PCBs.
Generate detailed reports, technical documentation, and engineering change notices (ECNs).
Ensure compliance with company health & safety, environmental policies, and quality standards (ISO 9001).
Essential Skills & Experience:
Strong understanding of electronic and electrical design at the component level.
Background in analogue design and low-noise circuit design (LF radio experience advantageous).
PCB layout design and familiarity with assembly processes.
Proven fault-finding skills down to trace/component level.
Experience with mechanical drawings and sub-assembly integration.
Familiarity with obsolescence mitigation in long-life electronic systems.
Experience within an ISO 9001 design and manufacturing environment.
Qualifications:
Bachelor’s degree or higher in Electronics, Physics, or a related discipline.
Extensive experience in electronics design or support within commercial or defence sectors.
UK citizen with no restrictions for UK Security Clearance.
This is a unique opportunity to contribute to mission-critical communications technology with long-term global impact. If you’re a proactive engineer who enjoys variety, responsibility, and technical depth—this role could be your perfect fit.
APPLY NOW for the role of Senior Design Engineer based in Letchworth, Hertfordshire and to join a committed team working on world-class defence technology. Please send your CV to Ltemple@redlinegroup.Com or call Lewis on 01582878820....Read more...
Assembly and wiring of electrical components, of varying size and complexity using drawings, parts lists and specifications
Bench assembly of electrical sub-assemblies
Mechanical assembly of hubs and framework
Testing new products against test procedures, or to specification
Repairing and fault finding on existing equipment to component level
Completing documentation of production/repair processes and test reports as required
Supporting experienced engineers on installations and site surveys
Ensuring full adherence to the company's quality systems at all times
Training:You will spend most of your time as part of a small but busy team at our premises in Elstree (WD6 3SJ), alongside our other Production/Repair Engineers and warehouse staff. The rest of your Apprenticeship will be spent attending onsite sessions at Oaklands College (Welwyn Garden City campus).Training Outcome:On completion of your apprenticeship, you can become either a Production Engineer or Installation & Service Engineer, working alongside colleagues who have helped you achieve this level of expertise.
Alternatively, there are other roles to consider within our Technical Department, including Technical Support, Project Engineer.
We’re looking for an apprentice who plans to develop their career at CST for at least the next five years.Employer Description:Call Systems Technology (CST) is a leader in innovative communication technology and critical alert software solutions. Trusted experts for almost 30 years, we supply 5-star hotels, investment banks, well-known retailers, super-yachts, football stadiums, museums, global restaurant groups, and many other industries and sites across the globe.
We provide on-site wireless communication solutions including paging systems, two-way radios, critical alarms, call button solutions and our Gen2 messaging and alarm monitoring softwareWorking Hours :Monday - Friday 08.00 to 16.30
37.5 hours per weekSkills: Communication skills,IT skills,Attention to detail,Organisation skills,Analytical skills,Logical,Team working,Patience,Willingness to learn....Read more...
Position: Module Integration Design Engineer
Job ID: 3423/2
Location: Segensworth, Hampshire
Rate/Salary: £65,000
Benefits:
• Private Medical
• Life Insurance
• Company Pension
Type: Permanent
HSB Technical Ltd is a specialist recruiter within the Power & Propulsion, Shipbuilding, Maritime Shipping, Energy and Subsea sectors – visit: www.hsbtechnical.com for a list of our vacancies. We have a number of permanent and contract vacancies for multiple businesses across the UK and overseas.
The below job description will outline this position of: Module Integration Design Engineer
Typically, this person will work closely with a multi-disciplinary team to develop and integrate modular payloads onto advanced maritime platforms. You will play a key role in designing high-performance solutions for modular marine craft used in defence and commercial operations. This is a fantastic opportunity for someone passionate about mechanical design and modular system integration.
HSB Technical’s client is an established and highly regarded MOD specialist, recognised for delivering high-performance craft for defence and specialist maritime applications. With a growing order book and an expanding product range, they are building a dedicated module integration team to support scalable, multi-role vessel systems.
While marine design experience is highly desirable, the company is also open to applicants from other engineering sectors such as automotive or aerospace, especially where experience includes systems integration, complex assembly design, or lightweight structural work.
Duties and responsibilities of the Module Integration Design Engineer:
• Perform Space, Weight and Power (Electrical) – SWAP(E) assessments for integration of diverse payload modules
• Develop 3D CAD concepts and detailed models using Siemens NX
• Generate manufacturing and assembly drawings for both prototype and production builds
• Design components and interfaces using appropriate materials (metals and composites), ensuring system-level integration
• Produce high-quality concept renderings and visuals for customer and marketing use
• Participate in design and integration workshops with both internal stakeholders and external payload suppliers
• Collaborate with multidisciplinary teams including systems, electrical and control engineering to achieve functional solutions
Qualifications and requirements for the Module Integration Design Engineer:
Essential:
• Degree or equivalent experience in Mechanical Engineering, Product Design, or similar field
• Proficiency with 3D parametric CAD (preferably Siemens NX)
• Understanding of structural design principles and SWAP(E) analysis
• Experience designing with metallic and composite materials
• Good time management and the ability to deliver to tight deadlines
• Effective communicator and team player
Desirable:
• Background in marine design or naval/military engineering
• Familiarity with rendering tools, VR environments, or immersive model interrogation
• Experience in automotive or aerospace engineering design
• Competence with 3D printing and design for additive manufacturing
• FEA experience in composites or metals
Key Behaviours:
• Organised and able to independently manage tasks and timelines
• Clear communicator with the ability to convey technical ideas effectively
• Collaborates well in multi-disciplinary teams
• Proactive problem-solver
• High standard of attention to detail
• Maintains professional conduct and respects confidentiality
General Accountabilities and Responsibilities:
• Apply initiative and practical thinking to overcome design challenges
• Maintain fluency in engineering and design software systems
• Act with integrity and align with the organisation’s values
• Support team members and business objectives with a positive mindset
• Complete any additional duties required by senior management
• Maximise productivity through effective time management
Health & Safety Responsibilities:
• Ensure the working environment is clean, safe, and compliant with company policies
• Operate tools and equipment responsibly and ensure safety devices are in place
• Follow all Health & Safety procedures for personal and team safety
• Immediately report potential hazards to management or the QHSE team
• Maintain and use PPE correctly and report wear or damage as needed
This vacancy is being advertised by HSB Technical Ltd who have been appointed to act as a recruitment partner for this role.....Read more...
Service Desk Analyst – up-to £39,500 Per Annum – HybridWe are looking for an experienced and highly technical Service Desk Analyst who will be highly motivated, and enthusiastic, with a proven track record in providing an efficient, effective, and professional ICT Service Desk support service, as part of a team who will be supporting the whole business while acting as a first point of contact for technical issues. The ideal candidate would have an expert understanding of ITSM tools, especially strong experience of developing Ivanti Neurons for ITSM (Ivanti Service Manager ISM). While we offer a flexible agile working policy, the nature of this support role requires it to be primarily office based with two weeks a month in office. Key Responsibilities:
Provide technical support across all levels of the business
Offer high level support and guidance on issues related to the council’s applications, systems, and hardware, which includes technology from Microsoft, VMware, Citrix, Cisco, and Dell
Manage lifecycle management of users, software and assets
Production of high-quality knowledge, FAQ’s etc
Qualifications and Skills:
Proven experience as a senior service desk analyst/engineer
Strong expertise in ITSM Tools, scripting, and automation
Good knowledge of Microsoft 365, etc
Highly motivated, enthusiastic, and technically minded
....Read more...
Graduate Engineer £30K a year, Monday to Friday, permanent position, Monday to Friday. No weekend work, Growing Company, Private heath care, 33 days holiday Location of the Graduate Engineer Position: High WycombeWe are seeking a motivated and talented Graduate Mechanical or Electrical Engineer to join their dynamic team. This is an great opportunity for someone to kick-start their career and gain hands-on experience in a fast-paced, innovative environment.The role would be supporting the existing team on existing and R&D projects the company is involved in.They operate in a clean, bright manufacturing facility, and are leading players in the sector in which they operate.The company will not be able to support individuals that require sponsorship. UnfortunatelyKey Responsibilities of the Graduate Engineer position
Assist in the design and development of components, assemblies, and systems using CAD tools such as SolidWorks, AutoCAD, or Inventor
Produce and maintain accurate 2D drawings and 3D models
Support design calculations, simulations, and analysis
Participate in product prototyping, testing, and validation
Work closely with manufacturing, production, and quality teams to ensure design intent and feasibility
Contribute to technical documentation, including BOMs etc
Support continuous improvement and innovation across our product lines
The ideal Graduate Engineer will have:
A degree in Mechanical, Electrical , Product Design, or a related field
Proficiency in CAD software (e.g., SolidWorks, AutoCAD, Inventor)
Strong understanding of engineering principles and design fundamentals
Excellent attention to detail and a proactive attitude
Good communication and teamwork skills
Eagerness to learn and grow in a supportive environment
What’s of offer:
Salary: Circa £30K a year
Full time permanent positions
Full training and mentorship from an experienced team
Exposure to real-world projects from day one
Career progression opportunities
Competitive salary and benefits package
A collaborative, forward-thinking company culture
If you would like a private chat about the Graduate role, please contact Rodger Morley at E3 Recruitment. ....Read more...
Are you a mechanical engineer with a passion for innovation, rugged electronics, and delivering real-world solutions? An exciting opportunity has opened for a Senior Mechanical Engineer to join a high-performing Hardware team focused on the development of advanced video and imaging processing products. This role is central to designing and delivering mechanical and thermal solutions for ruggedised, high-performance computing systems used in demanding environments.
What You\'ll Be Doing:
- Take ownership of mechanical and thermal design for rugged computer and video tracking products.
- Use SolidWorks 3D CAD software to develop enclosure and packaging designs.
- Lead mechanical engineering activities within small, multidisciplinary project teams.
- Perform engineering analyses including stress, fatigue, thermal, and vibration assessments.
- Conduct lab testing for design verification and validation.
- Produce detailed engineering reports for product design, failure investigations, and technical documentation.
- Collaborate with electronic and systems engineers to integrate components and subsystems.
- Maintain accurate engineering documentation including BOMs, ECRs, and design data.
- Support production, test, and field teams through design handover and troubleshooting.
- Work closely with project managers and sales teams to estimate and deliver on project goals.
- Assist with technical input for proposals, bids, and customer documentation.
What You\'ll Bring: Essential:
- A degree in Mechanical Engineering.
- Proficiency in SolidWorks 3D CAD.
- Experience designing enclosures for electronic equipment.
- A strong foundation in mechanical principles and a creative mindset.
- Demonstrated experience across the full product development lifecycle.
- Understanding of DFM, machining, casting, moulding, and fabrication techniques.
- Excellent communication and collaboration skills.
- Ability to lead technical work and deliver to deadlines.
Desirable:
- Experience designing for harsh or rugged environments.
- Background in defence, scientific equipment, or specialist machinery.
- Familiarity with document control systems (e.g., Dassault 3DEXPERIENCE).
- Skilled in engineering calculations and Microsoft Office tools.
Benefits & Perks:
- Flexible hybrid working options
- 28 days annual leave + holiday purchase scheme
- Friday lunchtime finish
- Group pension with matched contributions
- Income protection and life assurance
- Remote GP, mental health support, and physiotherapy services
- Share incentive plans and EV salary sacrifice
- Employee rewards platform and social events
- Onsite parking and wellbeing initiatives
- Training and development opportunities
Additional Information: Due to the nature of the work, all candidates must be eligible to obtain UK Security Clearance. This includes proof of identity, right to work in the UK, and five years of UK residency.
Ready to make an impact with cutting-edge hardware in a high-performance environment? Apply today and help shape the future of rugged technology.....Read more...
Are you an RF Engineer ready to step up into a more senior, impactful role? Were looking for a talented engineer with hands-on RF experience to help develop the next generation of Electronic Counter Measure (ECM) systems.
This is a fantastic opportunity to work on cutting-edge defence technology with a growing team at the forefront of RF and Electronic Warfare innovation.
As an RF Hardware Engineer, youll join an expert engineering team focused on designing and verifying high-performance RF sub-systems, including transceivers and power amplifiers from DC to 12GHz. Youll be involved in the full lifecycle, from simulation and design to implementation and integration.
Key Responsibilities:
- Design and verification of complex RF and analogue sub-systems
- Simulation and implementation of broadband power amplifiers and T/R switches
- Collaborate with software, firmware, PCB, and mechanical engineers
- Work with SPICE, EM simulators, and Mentor Graphics tools
- Support integration and test using RF test equipment
- Provide technical input and support estimation, planning, and delivery
Ideal Skills & Experience:
- RF and analogue circuit design and testing
- EM and large-signal simulation experience
- Experience with RF cascade analysis and PCB integration
- Knowledge of electronic components and systems
- Understanding of requirements management and system engineering processes
- Strong collaboration and communication skills
Qualifications & Security:
- HND/HNC or Degree in Electrical & Electronic Engineering or related STEM field
- Must be a UK or EU citizen (eligible for SC clearance)
- Current valid SC clearance is a plus
If you're looking to push your career forward in the RF/defence domain, this is a fantastic opportunity to make your mark on mission-critical technology.....Read more...
Are you an RF Engineer ready to step up into a more senior, impactful role? Were looking for a talented engineer with hands-on RF experience to help develop the next generation of Electronic Counter Measure (ECM) systems.
This is a fantastic opportunity to work on cutting-edge defence technology with a growing team at the forefront of RF and Electronic Warfare innovation.
As an RF Hardware Engineer, youll join an expert engineering team focused on designing and verifying high-performance RF sub-systems, including transceivers and power amplifiers from DC to 12GHz. Youll be involved in the full lifecycle, from simulation and design to implementation and integration.
Key Responsibilities:
- Design and verification of complex RF and analogue sub-systems
- Simulation and implementation of broadband power amplifiers and T/R switches
- Collaborate with software, firmware, PCB, and mechanical engineers
- Work with SPICE, EM simulators, and Mentor Graphics tools
- Support integration and test using RF test equipment
- Provide technical input and support estimation, planning, and delivery
Ideal Skills & Experience:
- RF and analogue circuit design and testing
- EM and large-signal simulation experience
- Experience with RF cascade analysis and PCB integration
- Knowledge of electronic components and systems
- Understanding of requirements management and system engineering processes
- Strong collaboration and communication skills
Qualifications & Security:
- HND/HNC or Degree in Electrical & Electronic Engineering or related STEM field
- Must be a UK or EU citizen (eligible for SC clearance)
- Current valid SC clearance is a plus
If you're looking to push your career forward in the RF/defence domain, this is a fantastic opportunity to make your mark on mission-critical technology.....Read more...
AWS DevOps Engineer
A leading Cloud Consultancy with 500+ staff, offering a broad range of services across Public & Private Cloud, Data, Digital Transformation, and Security, is seeking an experienced AWS Engineer to join its dynamic team. This role is focused on delivering high-performance AWS solutions that drive digital transformation for businesses.
Key Responsibilities:
Collaborate within a team to ensure seamless platform delivery, operation, security, reliability, efficiency, and governance.
Manage, migrate, and optimize customer solutions in AWS, ensuring performance and scalability.
Support both production and non-production environments across the AWS ecosystem.
Work closely with implementation teams on AWS migration projects and managed service onboarding.
Stay ahead of industry trends, applying emerging technologies to enhance system reliability and performance.
Provide expert technical support to maintain service continuity and stability for customers.
Skills & Experience:
Hands-on experience across AWS services, including compute, networking, storage, databases, security, and IAM.
Strong understanding of modern cloud architecture and best practices.
Ability to build and maintain relationships with internal and external stakeholders.
Excellent communication skills, capable of translating technical concepts into business value.
Comfortable navigating complexity and unfamiliar challenges.
Passion for technology, constantly seeking innovation and knowledge-sharing opportunities.
Track record of implementing enterprise solutions following AWS deployment designs.
High competency in Infrastructure as Code (Terraform/CloudFormation) and scripting (Python/Bash).
Experience with source control and supporting Windows & Linux environments.
Desirable – AWS certification or working towards obtaining one
Remote | Up to £58,000
Must be eligible to work in the UK. ....Read more...
Learn to maintain, service, repair and inspect Kalmar and third-party equipment to a high standard.
Learn to build strong rapport and relationships with customers, through professional behaviour and a customer-focused mind-set.
Learn to respond to routine enquiries from customers about the technical aspects of the organisation’s products and services.
Learn to troubleshoot, investigate, and resolve standard technical problems that arise, ensure ongoing customer satisfaction.
Learn to perform preventative maintenance as per manufacturers’ specifications.
Work with mentors to fault find & resolve problems in an efficient and timely manner.
Learn to provide reports and documentation to support the maintenance activities completed.
Work alongside other engineers and mentors on equipment and to assist with installation and commissioning as required.
Comply with all legal and Company standards, such as Code of Conduct and QSHE practices and carry out assigned tasks and duties in a safe manner, in accordance with instructions.
Training:The apprenticeship training will take place on-site at our chosen training provider's training centre in Swindon.
There will be 1 week of training every six weeks at the training provider site per year.
Accommodation and subsistence for this week away will be paid by the Company.
Apprentices will also be expected to undertake tasks through workbooks, on-the-job assessments, an online tracking system and a final end point assessment.Training Outcome:At the end of your apprenticeship, subject to a position being available within the Company, the apprentice will become a Junior Service Engineer.
After one year as a Junior Service Engineer, subject to a position being available within the Company, the engineer will become a Field Service Engineer and will join the normal Kalmar compensation scheme.Employer Description:Kalmar provides cargo handling solutions and services to ports, terminals, distribution centers and heavy industry.
We're a global organisation with over 1,300 service technicians worldwide.
Our equipment includes state-of-the-art terminal tractors, reach stackers, forklift trucks, empty container handlers, straddle carriers and crane spreaders.Working Hours :Monday to Friday, 8:30am to 5:00pm.
Flexibility may be required including starting earlier, finishing later and working weekends.Skills: Communication skills,IT skills,Attention to detail,Organisation skills,Customer care skills,Problem solving skills,Number skills,Analytical skills,Logical,Team working,Initiative,Physical fitness,Practical,Confident at heights....Read more...
Software Engineer – BirminghamBirmingham - Hybrid Salary up to £60,000 per annumSoftware Engineer required for a leading client based in the West Midlands. My client is currently seeking a Software Engineer to come on board to develop back-end technology solutions, collaborating with business stakeholders, product management, and engineering teams. They will design and implement solutions to meet new business needs while ensuring the maintenance of existing services. The role involves creating high-quality, robust, secure, and compliant software products with a strong focus on end-user experience. Responsibilities include working with both server-side and client-side technologies and leveraging low-code/no-code platforms as needed.Key skills and Responsibilities,• Previous Software Experience• Support and maintain existing products and services by identifying, troubleshooting, and resolving live issues efficiently and proactively.• Adapt to different development methodologies, working within a traditional waterfall framework or adopting agile practices as needed.• Strong knowledge of server-side technologies, including ColdFusion, PHP, and Java.• Proficiency in client-side technologies such as HTML and CSS.• Solid understanding of version control systems like Git and Subversion.• Experience working with relational databases, including MySQL and Microsoft SQL.• Excellent facilitation and communication skills, capable of engaging both technical and non-technical stakeholders effectively.• Understanding of back-office technologies and their practical application in business environments.• Familiarity with agile development tools and platforms such as Jira, Confluence, Slack, GitHub, Azure DevOps, and Trello.• Ability to thrive in a fast-paced, dynamic work environment.• Experience with front-end JavaScript frameworks such as jQuery, React, Vue, and Angular.• Proficiency in server-side frameworks like Laravel and ColdBox.• Hands-on experience with Linux distributions, including RedHat, CentOS, and Debian.• Knowledge of front-end CSS frameworks such as Bootstrap, Tailwind, and Foundation.• Expertise in developing and working with web services, including SOAP, APIs, and RESTful JSON.Interested!?! Please send your up-to-date CV to Emma Siwicki at Crimson for immediate reviewNot interested?! Do you know anyone that might be? Refer a friend for this role to earn £250 worth of vouchers. Crimson are acting as an employment business in regards to this vacancy.....Read more...
Recruit4staff is proud to be representing their client, a leading North Wales manufacturer, in their search for a Site Electrical Engineer to join their state-of-the-art facility in Wrexham.For the successful Electrical Engineer, our client is offering:
Salary of up to £59,000 per annum (including shift premium)Monday to Friday, 8:30 am – 4:30 pm (flexibility required)Permanent role with a progressive companyAnnual company bonusGenerous benefits packageGreat company culture
The Role – Electrical Engineer:
Ensure the electrical safety of all personnel and systems across the site, maintaining a positive health & safety culture.Define, manage, and improve the Electrical Management System and respond effectively to outages.Act as the Subject Matter Expert (SME) for all electrical equipment and systems.Provide technical advice and support to operations and capital projects, including the development of User Requirements Specifications (URS).Manage Quality and Change Control processes for all electrical infrastructure in line with internal engineering and quality systems.Lead on energy management, sustainability initiatives, and innovation in electrical systems.Coordinate all electrical-related activity during shutdowns and collaborate with external vendors and authorities.
What our client is looking for in an Electrical Engineer:
Recognised qualifications in Electrical Engineering, ideally HNC or above – ESSENTIALPrevious experience in a manufacturing setting – ESSENTIALExperience working with or managing high-voltage equipment – ESSENTIALA strong focus on compliance, innovation, and continuous improvementEffective communicator and able to provide technical leadership
Key skills or similar Job Titles:
Electrical Engineer, Senior Engineer, HV Engineer, Electrical Compliance Manager, Engineering Safety Manager, Electrical Project Lead, Engineering SMECommutable From:
Wrexham, Chester, Oswestry, Mold, Deeside, Ellesmere Port, Shrewsbury, North Wales, Wirral, FlintFor further information about this and other positions, please apply now.This vacancy is being advertised on behalf of Recruit4staff (Wrexham) who are operating as a recruitment agency, agent, agencies, employment agency, or employment business.....Read more...
Recruit4staff are proud to be representing a well-established engineering business in their search for an Electrical Design Engineer to work at their Chester-based facility.Job Role: Electrical Design Engineer
As an Electrical Design Engineer, you will be responsible for producing accurate and high-quality electrical schematics, layouts, and technical documentation for a variety of bespoke engineering projects. You will work closely with project managers, mechanical and systems engineers, and clients to develop tailored electrical solutions that comply with industry regulations and project specifications. The role requires managing multiple projects simultaneously while providing expert technical support from initial concept through to final production and installation.Your work will be crucial in ensuring the safe, efficient, and compliant delivery of custom electrical systems used in industrial or commercial applications.Job Details:
Pay: £30,000 - £35,000 per annum (DOE)
Hours: Monday to Friday, 8:00 AM – 5:00 PM (Early Finish Friday)
Duration: Permanent
Essential Skills & Experience:
Proven experience in electrical design engineering (ideally in an industrial or manufacturing setting)
Proficiency in electrical design software such as AutoCAD Electrical, EPLAN, or similar
Ability to produce detailed electrical schematics, panel layouts, and cable schedules
Strong attention to detail and commitment to quality
Effective communication and a collaborative approach to team-based project delivery
Commutable From:
Chester, Ellesmere Port, Deeside, Wrexham, Frodsham, Runcorn, Queensferry, Buckley, Mold, TarvinSimilar Job Titles:
Electrical Engineer, Control Panel Designer, Electrical Systems Engineer, EPLAN Designer, Electrical CAD Engineer, Automation Design Engineer, Electrical DraughtspersonFor further information about this role, please apply now.This vacancy is being advertised on behalf of Recruit4staff, who are operating as a recruitment agency.....Read more...
Recruit4staff are proud to be working with our client, a leading Building Services company, in their search for a Technical QA Manager to work from their Head Office in Bromborough, working across multiple projects UK wide, with regular lodging away.For the successful Technical QA Manager our client is offering:
Basic salary of up to £55,000 per annum (Negotiable depending on experience)Working hours: 40 per week, Mon- Thurs 8:30-17:00 and Fri 8:30-16:30Company PensionDiscretionary Company BonusCar Allowance24 days Holiday + bank holidaysPermanent Role
The Role - Technical QA Manager:
Working on high rise residential MEP projects for commercial customers across the UKSupervise the project delivery / QA of our in-house and sub-contract site teams, and act as the day-to-day co-ordination contact between our site teams, other trades, the office, and as required also the client/main contractor.Keep the contract management team informed of progress, changes, and foreseeable issues etcEnsure all works are compliant and installed to specification and the appropriate British/European Standards as applicable.Ensure that all contract deliverables are met, including ensuring all QA records and handover packs are complete and any agreed milestones are achieved.Ensure team focus on key points of failure and ensure risks are eliminated/mitigated. For this role, this means a particular focus on: regulatory compliance, escape of water risks, fire/life safety efficacy risks, agreed programme, and contract deliverables. Co-ordinate (and as required undertake) site quality inspection works, verify, and sign-off completed inspectionsContribute to the team as required in respect of production of technical, programme, and QA project updates and site progress meetings.Ensure personnel are suitably trained for the tasks and equipment they are using to install. E.g. Proper use of crimps etc. Perform periodic checks to ensure such technical training / good practices are being followed.Ensure materials and equipment are suitably selected, received, protected/used, and site logistics/methods suitably planned to ensure quality is not compromised at any stage. Ensure equipment is calibrated when this is required for proper use.Ensure all relevant procedures are followed, maintain site records, and assist with site auditing requirements.To stand in for Site Supervisors on an as/when basis when required to do so on site.Ensure all installations are completed in accordance with the latest drawing/specification revisions and relevant standards.Plan for and ensure ITP requirements are met and relevant notices are raised at the appropriate time, and stage sign offs are achieved as applicable.Provide post-completion defects/aftersales/call-out response support as may be required from time to time. This may include hands on work troubleshooting and solving issues, as well as resourcing and organising/supervising any remedial/repair/PPM works.Ensure NCR processes are followed, actions closed out, and lessons learnt are appropriately shared.
What we are looking for in the successful Technical QA Manager
Relevant Trade background or previous experience in similar role - ESSENTIALTime served experienced City & Guilds qualified Engineer with minimum relevant NVQ3 (or equivalent) in relevant discipline. - ESSENTIALProven track record of MEP on site supervision experience as non-working supervisor on fast pace high rise residential / student / BTR projects. - ESSENTIALSolid experience in running teams on site including new build and refurbishment site works planning/co-ordination, and driving programme on fast paced sites. - ESSENTIALPractical time-served hands-on competence in mechanical installation, commissioning, trouble-shooting, and sub-contractor management. - ESSENTIALStrong knowledge of common MEP points of failure and key risks, failure prevention/mitigation strategies, and acute awareness of the importance of timeliness and thoroughness of QA processes - in step with the build sequence. - ESSENTIALExperienced in ISO-9001:2015/ ISO-45001:2015 / ISO-14001:2018 quality management processes. - ESSENTIALSSSTS/SMSTS or equivalent - BENEFICIALPASMA, MEWP, Asbestos (non-licenced), First Aid at Work, Unvented HW, Scaffold Inspection - BENEFICIALWorking knowledge of Procore software - BENEFICIALFull Driving Licence - ESSENTIALAbility to work both as part of a team and independently.Good Man Management skills.Good communication skills, both written and verbal.Good knowledge of Microsoft Office, Excel and Project.
Key skills or similar Job titles: Technical QA Manager, Quality Assurance Engineer, Building Services Engineer, Building Services Manager, Technical Services Manager, Quality Manager, Quality EngineerCommutable From: Chester, Liverpool, Ellesmere Port, Bromborough, Wirral, Deeside, Wrexham, Widnes, RuncornFor further information about this and other positions please apply now This vacancy is being advertised on behalf of Recruit4staff (NW) who are operating as a recruitment agency, agent, agencies, employment agency or employment business.....Read more...
Senior Mechanical Design Engineer
Cheshire
£52,000 - £58,000 + Chartership Support + Flexible Hybrid Working + Training + Holidays + Pension + Bonus + Immediate Start!
Are you a Senior Mechanical Design Engineer looking to take your career further with a fast-growing global electromechanical specialist? Join a tight-knit team where your deep technical expertise and leadership will be valued—you’ll lead complex design projects, mentor junior engineers, and drive innovation across multiple industries. With low staff turnover and a diverse, high-impact workload, this is your chance to thrive in a company that truly appreciates your skills and invests in your long-term development.
The engineering team has grown rapidly by delivering state-of-the-art actuator systems to aerospace, defense, and other markets. They’re now seeking a Senior Mechanical Design Engineer with hands-on actuator design experience to lead pivotal projects alongside top-tier industry partners. In return, you’ll collaborate with seasoned experts who value your precision and innovation—and build a lasting career with a company that truly rewards your contributions.
Your Role As Senior Mechanical Design Engineer:
* Oversee a variety of different projects * Carry out design review on projects * Hybrid working role with 3 days in the office and 2 days working from home
As A Senior Mechanical Design Engineer You Will Have:
* Hands-on experience with electromechanical systems, including pneumatics, hydraulics, pumps, motors, actuators, or similar * Proficiency in CAD * Commutable 3 x a week to the office in Runcorn Please apply or contact Yusra Zuhair on 07458163045 for immediate consideration
Keywords: Engineering, Electrical, Mechanical, Electromechanical, Cheshire, Warrington, Runcorn, Hydraulic, Aerospace, Actuators, Defence, Space, Subsea, CAD, Mechanical engineering, Actuator design, Design, Preston Books, mechanical design,Mechatronics, SolidWorks, Rotary Actuators, Power Electronics, Control Panels, Gearboxes, Chester, Senior design engineer, lead design engineer, lead mechanical engineer, cad engineer.
This vacancy is being advertised by Future Engineering Recruitment Ltd. The services of Future Engineering Recruitment Ltd are those of an Employment Agency.
Future Engineering Recruitment Ltd can only accept applications from candidates who have a valid legal permit or right to work in the United Kingdom. Potential candidates who do not have this right or permit, or are pending an application to obtain this right or permit, should not apply as your details will not be processed.
We will endeavour to respond to all applicants, however, due to the high volume of applications, we can only guarantee contact with those who are shortlisted. ....Read more...
Regional Sales Engineer (HVAC & Commercial Ventilation) – London Base Salary £60–£65K + Uncapped Commission (OTE £100K+) | Fully Remote | Career-Defining Opportunity
Sell Leading AHU Refurbishment & Bespoke Ventilation Solutions | Trusted Brand | Internal Promotion Backfill
Are you an experienced HVAC sales engineer, ventilation specialist, or AHU expert looking for your next standout role? This is your opportunity to represent a market leader with a stellar reputation, exceptional products and a rewards package that truly reflects your performance.
I'm partnering with a long-established client at the forefront of the commercial HVAC and ventilation industry. Known for delivering high-spec air handling units, custom ventilation systems and AHU refurbishment projects across major sectors, they're now hiring due to internal promotion — a clear sign of real progression potential.
What Makes This Opportunity Stand Out
£60K–£65K base salary with uncapped commission – realistic £100K+ OTE
Company car or car allowance
Fully remote role with full control over your London & South East territory
Full home-office setup and remote support from day one
Represent a premium product range with strong market demand
Backed by 50+ years of HVAC expertise and a reputation for excellence
Supportive, flexible culture focused on long-term success and genuine progression
What You’ll Be Doing – Regional Sales Ventilation Engineer
Leading all sales activity across London and surrounding areas
Winning new business while nurturing key existing accounts
Delivering technical consultancy and tailored ventilation solutions
Collaborating with internal teams on bespoke, spec-driven projects
Driving spec-in opportunities and long-term commercial wins
Who You Are – HVAC / Ventilation Sales Specialist
Proven experience in technical sales, HVAC business development or ventilation engineering
Background in air handling units, AHU refurbishment, or commercial ventilation systems
Skilled in consultative selling, solution-led conversations and project specification
This role is made for someone with technical know-how, commercial drive and the ambition to build something significant. If you're ready to represent a brand that delivers — both in product and people — now’s the time.
Apply today or reach out for a confidential conversation.
I’m Fiona McSheffrey, a specialist recruiter in the Construction and Modular Building Supply sector at E3 Recruitment. I work in partnership with leading companies across the UK, connecting high-calibre professionals with roles that truly support long-term career progression.
If you’d like more information about this opportunity — or wish to have a confidential discussion about your next career move — please don’t hesitate to contact me directly at E3 Recruitment.....Read more...
Junior Technical Support Engineer (Hybrid working)
An exciting opportunity for fast-tracked career progression has arisen with a leading IT Service Provider based near Leeds. Specialising Cloud, Connectivity, Unified Communications & Collaboration technologies and services, this industry leader has expanded rapidly through both organic growth and acquisition, and is in need of several further ambitious IT support analysts to provide technical support to their enterprise scale customers.
You will be a part of an energised and experienced IT support team, providing technical support for a broad range of leading cloud products and services, underpinned by excellent customer service. The business has a strong ethos of upskilling and hiring from within, working closely with you to plan and support your career progression within the organisation right from the outset. Many of the organisations senior technical specialists and managers have progressed rapidly from the service desk.
Please note experience is not essential, training will be provided. However, a keen interest in IT and technology is required.
Role Responsibilities (condensed):
Offer a high level of technical IT support to a variety of clients at second-line level
Ensure incidents are resolved in line with SLAs
Escalate any unresolved issues
Ensure internal documentation is developed and maintained
Learning and development; staying up-to-date and expanding your technical knowledge
Required experience, skills and knowledge
Excellent customer service skills
Keen interest in IT and Technology
Degree in an IT field is desirable
Full UK Driving License
Remuneration:
Salary of up to £24k-£27k PA + 20% shift bonus uplift. Taking total package to circa £32k.
Excellent employment benefits package and supported learning, development and career progression.
Note that this is an onsite based position (near Leeds). Free parking onsite.
Hours of work: 2x day shifts from 7.00am to 7.00pm. 2x night shifts from 7.00pm to 7.00am This will be followed by a 4-day rest period. (Please note, 3 of these shifts can be remote)
....Read more...
