Siemens Healthineers is one of the world’s largest suppliers to the healthcare industry and a trendsetter in medical imaging, laboratory diagnostics and medical information technology.
We have an exciting opportunity for enthusiastic and aspiring individuals to join our Field Service Engineer Apprenticeship based in the M6 corridor (Stoke, Crewe, Stafford) region, beginning in August 2026.
This engineering apprenticeship will involve dedicated training on your journey to becoming a skilled Field Service Engineer in the healthcare industry and offers a favourable apprenticeship salary and benefits.
In this Field Service Engineer Apprenticeship role, you will join our field-based engineering team of approximately 200 engineers and be ultimately responsible for installing, repairing, and maintaining our medical systems. You will provide vital technical service support to our customers and work at hospital sites throughout the UK, initially focusing on customer sites within the M6 corridor (Stoke, Crewe, Stafford) region.
Duties include, but are not limited to:
Develop an understanding of relevant industry health and safety standards, regulations, and environmental and regulatory requirements
Maintenance and operational practices, processes and procedures cover a range of plant and equipment
Locate, and rectify faults in plant and equipment
Communicate with and provide information to stakeholders in line with personal roles and responsibilities
Read, understand and interpret information and work in compliance with technical specifications and supporting documentation
Inspect and maintain appropriate plant and equipment to meet operational requirements
Assess and test the performance and condition of plant and equipment
Communicate, handover and confirm that the appropriate engineering process has been completed to specification
Position, assemble, install and dismantle electrical plant and equipment, which may include motors, switchgear, cables and conductors, to agreed specifications
Diagnose and determine the cause of faults in electrical plant and equipment
Replace, repair or remove components in the electrical plant and equipment and ensure its return to operational condition
You can also expect the following:
Travel to sites across your allocated region
Attend other Siemens manufacturing sites across the country on temporary short-term assignments
Visit the Siemens Healthineers Customer Care Centre in Camberley, Surrey
Travel abroad to the Siemens Training Centres in Germany and the US as required
Training:
Practical Skills Training to be delivered at a local college
BTEC Level 3 Diploma to be studied at College on a day-release basis over the first 2 years of the programme - if level 3 not already achieved
If Level 3 already achieved, will work towards achieving the Engineering HNC
Portfolio of competence-based evidence to meet the Knowledge, Skills and Behaviours criteria as outlined in the Standard.
End Point Assessment
Level 2 Functional Skills in maths and English (if required)
Training Outcome:
Upon completion of the Apprenticeship, you will have the opportunity to apply for a full-time position at Siemens. Healthineers as a Customer Service Engineer with the opportunity of further education and product training
Employer Description:Our technology empowers customers to transform the industries that form the backbone of economies: industry, transportation, buildings and grids. Our solutions accelerate the digital transformation of multiple industries, to scale sustainability impact.Working Hours :Monday - Friday (Exact shifts to be confirmed).Skills: Communication skills,IT skills,Attention to detail,Organisation skills,Customer care skills,Problem solving skills,Number skills,Analytical skills,Logical,Team working,Initiative,Patience....Read more...
Siemens Healthineers is one of the world’s largest suppliers to the healthcare industry and a trendsetter in medical imaging, laboratory diagnostics and medical information technology.
We have an exciting opportunity for enthusiastic and aspiring individuals to join our Field Service Engineer Apprenticeship based in the London and Southern England area, beginning in August 2026.
This engineering apprenticeship will involve dedicated training on your journey to becoming a skilled Field Service Engineer in the healthcare industry and offers a favourable apprenticeship salary and benefits.
In this Field Service Engineer Apprenticeship role, you will join our field-based engineering team of approximately 200 engineers and be ultimately responsible for installing, repairing, and maintaining our medical systems. You will provide vital technical service support to our customers and work at hospital sites throughout the UK, initially focusing on customer sites within the London and South England area.
Duties include but are not limited to:
Develop an understanding of relevant industry health and safety standards, regulations, and environmental and regulatory requirements
Maintenance and operational practices, processes and procedures cover a range of plant and equipment
Locate, and rectify faults in plant and equipment
Communicate with and provide information to stakeholders in line with personal roles and responsibilities
Read, understand and interpret information and work in compliance with technical specifications and supporting documentation
Inspect and maintain appropriate plant and equipment to meet operational requirements
Assess and test the performance and condition of plant and equipment
Communicate, handover and confirm that the appropriate engineering process has been completed to specification
Position, assemble, install and dismantle electrical plant and equipment, which may include motors, switchgear, cables and conductors, to agreed specifications
Diagnose and determine the cause of faults in electrical plant and equipment
Replace, repair or remove components in the electrical plant and equipment and ensure its return to operational condition
You can also expect the following:
Travel to sites across the South of England
Attend other Siemens manufacturing sites across the country on temporary short-term assignments
Visit the Siemens Healthineers Customer Care Centre in Camberley, Surrey
Travel abroad to the Siemens Training Centres in Germany and the US as required
Training:
Practical Skills Training to be delivered at Basingstoke College of Technology
BTEC Level 3 Diploma to be studied at College on a day-release basis over the first 2 years of the programme - if level 3 not already achieved
If Level 3 already achieved, will work towards achieving Engineering HNC
Portfolio of competence-based evidence to meet the Knowledge, Skills and Behaviours criteria as outlined in the Standard
End Point Assessment
Level 2 Functional Skills in maths and English (if required)
Training Outcome:Upon completion of the Apprenticeship, you will have the opportunity to apply for a full-time position at Siemens Healthineers as a Customer Service Engineer with the opportunity of further education and product training.Employer Description:Our technology empowers customers to transform the industries that form the backbone of economies: industry, transportation, buildings and grids. Our solutions accelerate the digital transformation of multiple industries, to scale sustainability impact.Working Hours :Monday - Friday. Exact shifts to be confirmed.Skills: Communication skills,IT skills,Attention to detail,Organisation skills,Customer care skills,Problem solving skills,Number skills,Analytical skills,Logical,Team working,Initiative,Patience....Read more...
An opportunity for a Design Engineer to join a world leader in Waste Handling Equipment. The client is a highly successful international business with a number of manufacturing and service facilities in the Uk and abroad with its roots going back to the 1800’s. Our client has an impressive list of accreditations /approvals , ranging from ISO 9001 to Investors in People. They are the market leaders in terms of innovation, safety and aftermarket service. Design Engineer Overview
You will produce mechanical drawings and the part list documentation to support the products manufactured onsite at the client’s premises.This person would be working directly for and under the supervision of the Engineering Manager and the Senior Project Draughtsman. You will develop engineering designs from existing product ideas and from gathered information liaising with the production and sales / marketing departments.Working within the engineering department and under the guidance of the Engineering Manager the objective is to produce working mechanical drawings using 3D Cad technology; part lists and stores pick lists for each of the vehicle types we produce. There is a need to produce detailed assemblies, component drawings and pick lists for each of the following areas of build for the vehicles. Examples:Chassis cab.Chassis preparation.Body construction.Lifter systems. Key Responsibilities of the Design Engineer -
Direct involvement with the Production Department to identify and solve engineering problems arising with the build of the vehicle on the shop floor; identifying and introducing economical and practical solutions as soon as possible to reduce production downtime.
This roll will also include direct involvement with the Service Department to identify and solve problems arising with component failures on the vehicles in the field and identifying and introducing economical and practical solutions.
Liaise with suppliers and the production departments to solve any mechanical problems arising during manufacture or production of parts or vehicles.
Compiling of Technical Job Files to comply with CE documentation, Health and Safety and Road Vehicle Regulations and chassis manufactures guidelines.
Up-date technical files and amending drawings where Engineering Changes are required.
To the assist with identification of parts and spares requests from stores.
Assist with sourcing and purchasing of parts from suppliers for prototype assemblies taking into consideration costs and delivery schedules.
KEEN TO SPEAK TO -
Experienced Mechanical Design Engineers.
3D Software – Autodesk Inventor /Soldiworks experience.
HNC /HND accredited in Mechanical Engineering.
Design background with moving mechanisms.
THE OFFER -
Starting Salary £40,000 per Annum.
33 Days Paid Holidays.
5% Employer Pension Contribution.
Medical Cash Plan Scheme
....Read more...
PCB Design Engineer required to work on SATCOM terminal hardware in senior or leadership role as part of a team designing and implementing satellite antenna terminals. All decisions require design for manufacture considerations balancing cost, control, environment and operation practicalities.
Skills
Electronic hardware design, integration, test and refinement experience.
Complex Schematic and multilayer PCB design ideally in Altium for complex RF stackup PCBs.
Power supply design, power management, switching and regulator circuit design.
BEng, Meng in ideally Ph.D. in Electronic Engineering or equivalent.
Embedded hardware ARM and Xilinx FPGA or SoC knowledge.
High speed digital understanding with high speed bus design experience of DDR, PCIe, PS-GTR or other.
Role
Technical leadership on complex hardware designs including terminal architecture.
Verify and test hardware design in electronics laboratory using oscilloscopes and spectrum analysers reworking PCBs as makes sense.
Support product certification to electrical and operational standards.
Train and develop junior Hardware Engineers. ....Read more...
Assist with installing and terminating copper and fibre data cabling
Support testing and fault-finding to ensure cabling meets required standard
Follow health and safety rules while maintaining tools and equipment
Training Outcome:
To work towards becoming a Senior Engineer
Employer Description:Talkwire is an Information Technology Total Solutions company based in Kingsbury Square, Melksham in Wiltshire. With supply, installation and maintenance options for a portfolio of telecommunication solutions.Working Hours :Monday to Friday, Shifts to be confirmed with a 30 minute unpaid break.Skills: Communication skills,IT skills,Organisation skills,Problem solving skills,Logical,Creative,Physical fitness,Practical skills,Willingness to learn,Awareness of Health and Safety,Technical Aptitude....Read more...
PCB Design Engineer required to work on SATCOM terminal hardware in senior or leadership role as part of a team designing and implementing satellite antenna terminals. All decisions require design for manufacture considerations balancing cost, control, environment and operation practicalities.
Skills
Electronic hardware design, integration, test and refinement experience.
Complex Schematic and multilayer PCB design ideally in Altium for complex RF stackup PCBs.
Power supply design, power management, switching and regulator circuit design.
BEng, Meng in ideally Ph.D. in Electronic Engineering or equivalent.
Embedded hardware ARM and Xilinx FPGA or SoC knowledge.
High speed digital understanding with high speed bus design experience of DDR, PCIe, PS-GTR or other.
Role
Technical leadership on complex hardware designs including terminal architecture.
Verify and test hardware design in electronics laboratory using oscilloscopes and spectrum analysers reworking PCBs as makes sense.
Support product certification to electrical and operational standards.
Train and develop junior Hardware Engineers. ....Read more...
FM Technical Supervisor - Peterborough - Global Facilities Management Organisation: Prison Service CBW Staffing Solutions are seeking an experienced Technical Supervisor with a strong Mechanical or Electrical bias to join our client’s team based in Peterborough.This is an exciting opportunity to take on an exciting role in ensuring the seamless operation, maintenance and compliance of all FM requirements as well as managing a team of approx. 10 direct reports. Package:Competitive salary up to £44,000 per annum (depending on experience) Core hours are Monday - Friday (40 hours per week)25 days annual leave plus bank holidaysFree meals provided whilst on shift!Access to staff gym and free parkingGenerous workplace pension schemeTraining, development & progression opportunities Responsibilities:Oversee and coordinate planned and reactive maintenance of all M&E systems, ensuring compliance with statutory and regulatory requirementsProducing and reviewing RAMS/SOP’s for routine maintenance tasksLead a team of 10 engineers and contractors, providing technical support and guidanceLiaise with the client, site management, and external contractors to ensure efficient service deliveryEnsure health and safety protocols are followed, maintaining a safe working environmentManage asset performance, energy efficiency initiatives and continuous improvement projectsMaintain accurate records, documentation, and compliance reports Requirements:Proven experience in a similar Technical Supervisor or Lead Engineer role within the Facilities Management industryStrong M&E knowledge with relevant qualifications (e.g., City & Guilds, NVQ, or equivalent in Electrical/Mechanical Engineering)Experience working in a critical environment is highly desirable Interested? Apply with a full & up to date CV or contact Aaron Rutter at CBW Staffing Solutions.....Read more...
Technical Support Responsibilities:
Assist the technical support team in responding to customer queries related to CADS detailing and engineering software.
Help prepare and produce tutorial videos for CADS software, including recording and editing.
Attend site visits and meetings when required.
Work towards becoming fully proficient in the CADS family of software programs.
IT Responsibilities:
Support the IT team with the smooth running and maintenance of company computer systems and equipment.
Training:Apprenticeship & Qualification:
As part of this apprenticeship, you will be required to enrol on the following university course, with course fees fully paid by CADS (subject to terms):
Qualification:
HNC in Civil Engineering – Solent University
Duration: 2 yearsStudy mode: Part-time (1 day per week)Travel: Self-travel requiredFees: Paid by CADS (subject to terms)
This course provides essential understanding and insight into multiple aspects of construction and the built environment. Combined with your practical experience at CADS, you will gain valuable industry skills while working alongside highly experienced engineers across a wide variety of projects.Training Outcome:Once qualified and experienced, you would usually progress into a more independent role such as Technician / Technical Support Engineer.Employer Description:Computer and Design Services Ltd (CADS) is a leading international software company specialising in civil and structural engineering design and detailing software.
As well as creating world class software CADS also provides RC detailing, Design and BIM modelling services.Working Hours :09:00 - 17:30, Monday to Friday.
Day release (one day per week) for university course attendance. Expected to work in the office when not attending university, for example during the summer holidays etc.Skills: Communication skills,Attention to detail,Organisation skills,Problem solving skills,Team work....Read more...
Produce accurate civil and structural drawings using industry-leading Computer-Aided Design (CAD), Revit, and Building Information Modelling (BIM) software
Collaborate with engineers and project managers to support design processes
Ensure all drawings meet project specifications and quality standards
Balance on-the-job training with college coursework to build a strong technical foundation
Training:
Civil Engineering Technician Level 3 Apprenticeship standard
Training will be held at Leeds College of Building
College attendance will be one day per week on a day release basis
Training Outcome:After completing a civil/structural engineering technician apprenticeship, there are several career progression opportunities depending on your interests, skills, and further education.
1. Engineering Technician (EngTech) Status:Professional Registration: Many apprenticeships are designed to meet the requirements for EngTech status with institutions like the Institution of Civil Engineers (ICE). This is a recognised professional qualification that can open doors for career advancement
2. Further Education and Qualifications:Higher National Certificate/Diploma (HNC/HND): Many apprentices pursue further qualifications, like an HNC or HND in Civil or Structural Engineering, which can deepen technical knowledge
3. Bachelor’s Degree (BEng/BSc): With the right qualifications and experience, you might progress to a degree-level apprenticeship or enroll in a part-time/full-time university course
4. Chartered Engineer (CEng) or Incorporated Engineer (IEng): With further studies and experience, you could aim for higher professional qualifications, which significantly boost career prospects and salaryEmployer Description:JPG excels in providing the highest quality civil and structural engineering consultancy services. We work for clients UK wide and internationally, covering all the major development sectors and working on projects from site acquisition and appraisal through to construction completion.
Our dedicated team of engineers and technicians are skilled in all aspects of civil and structural design, combining creativity and environmental innovation with exacting compliance to industry regulation.Working Hours :Full time position- 7.5 hours per day - 37.5 hours per week.
Monday to Friday 08:30am- 5:00pm with one hour's flexibility around start finishing times.
One hour for lunch.Skills: Communication skills,IT skills,Attention to detail,Organisation skills,Problem solving skills,Number skills,Team working,Initiative,Non judgemental,Patience,Committed to learning....Read more...
Design & Feasibility:
Assist in translating customer requests into design solutions, participate in feasibility reviews, and ensure value engineering aligns with budget requirements
Technical Documentation: Prepare system layouts, general arrangement drawings, site installation packs, and detailed design specifications
Equipment & Compliance: Review equipment design for standardisation, assess throughputs and capacities, and ensure compliance with legislation and CE norms
Procurement & Risk Management: Support RFQ preparation, review supplier responses, and contribute to design risk assessments
Project Support & Collaboration: Participate in design and project review meetings, survey sites, and manage project documentation, including H&S files
Continuous Improvement: Identify cost-saving and value-added opportunities, support technical sales, and collaborate across departments to enhance efficiency
Training:Mechatronics Maintenance Technician Level 3.
Your first year will be full‑time at college with return‑to‑industry weeks. In your second year, you’ll split your time between block release and workplace learning, with your final two years spent fully in the workplace.Training Outcome:You are being trained to be a project engineer. Employer Description:TGW Logistics Group is a leading systems provider of highly automated, flexible solutions supporting distribution and fulfilment for leading retailers and global brands in e-commerce, apparel, general merchandise and grocery.Working Hours :You will be office-based Monday to Friday.Skills: Communication skills,IT skills,Attention to detail,Organisation skills,Problem solving skills,Administrative skills,Number skills,Analytical skills,Logical,Team working,Initiative....Read more...
Service Engineer – Industrial Refrigeration
Barnsley £44,000 – £46,000 Basic + Overtime & Benefits OTE £65,000 – £70,000Are you an experienced Refrigeration Engineer ready to step up into heavy industrial plant work — away from supermarket callouts?We’re expanding our team and looking for a skilled Industrial Refrigeration Service Engineer to join our growing operation in Barnsley. This is a fantastic opportunity to move into heavy commercial refrigeration plant, chilled water systems, and industrial equipment — with real earning potential and career progression.
Why Join Us?
✅ £44k–£46k basic salary ✅ OTE £65k–£70k with overtime ✅ £170 standby payment ✅ 25 days holiday + Bank Holidays ✅ Company van provided ✅ Private healthcare & sick pay scheme (after qualifying period) ✅ Pension scheme ✅ No supermarket contracts
The Role
This is a field-based Service Engineer position working within the industrial refrigeration sector.You’ll be responsible for:
Servicing and maintaining heavy commercial refrigeration plant
Working on chilled water systems and associated equipment
Occasional air-conditioning work
Responding to breakdowns and reactive service calls
Troubleshooting and resolving repeat technical issues
Carrying out site audits and recommending system improvements
Providing technical support to apprentices and customers
Maintaining high Health & Safety standards at all times
Representing the company professionally on customer sites
This is a customer-focused role where technical ability, problem-solving, and professionalism are key.
What We’re Looking For
✔ Proven experience in a refrigeration service environment ✔ F-Gas Category 1 (essential) ✔ Ammonia handling experience (highly desirable) ✔ IPAF certification ✔ Strong fault-finding and diagnostic skills ✔ Ability to manage workloads and meet deadlines ✔ Excellent customer service skills ✔ Industrial or heavy commercial experience preferred ✔ Honest, reliable and safety-driven mindsetThis role would particularly suit an engineer currently working in retail/supermarket refrigeration who wants to progress into the industrial/heavy commercial sector.
The Opportunity
We are a growing team of specialist engineers working on complex and technically interesting plant. You’ll be supported by an experienced Service Manager and given opportunities to develop technically while significantly increasing your earning potential.If you’re ambitious, technically capable, and ready to move into industrial refrigeration — we want to hear from you.Aqumen Business Solutions is acting as an Employment Agency in relation to this vacancy.....Read more...
Service Engineer – Industrial Refrigeration
Hull £44,000 – £46,000 Basic + Overtime & Benefits OTE £65,000 – £70,000Are you an experienced Refrigeration Engineer ready to step up into heavy industrial plant work — away from supermarket callouts?We’re expanding our team and looking for a skilled Industrial Refrigeration Service Engineer to join our growing operation in Barnsley. This is a fantastic opportunity to move into heavy commercial refrigeration plant, chilled water systems, and industrial equipment — with real earning potential and career progression.
Why Join Us?
✅ £44k–£46k basic salary ✅ OTE £65k–£70k with overtime ✅ £170 standby payment ✅ 25 days holiday + Bank Holidays ✅ Company van provided ✅ Private healthcare & sick pay scheme (after qualifying period) ✅ Pension scheme ✅ No supermarket contracts
The Role
This is a field-based Service Engineer position working within the industrial refrigeration sector.You’ll be responsible for:
Servicing and maintaining heavy commercial refrigeration plant
Working on chilled water systems and associated equipment
Occasional air-conditioning work
Responding to breakdowns and reactive service calls
Troubleshooting and resolving repeat technical issues
Carrying out site audits and recommending system improvements
Providing technical support to apprentices and customers
Maintaining high Health & Safety standards at all times
Representing the company professionally on customer sites
This is a customer-focused role where technical ability, problem-solving, and professionalism are key.
What We’re Looking For
✔ Proven experience in a refrigeration service environment ✔ F-Gas Category 1 (essential) ✔ Ammonia handling experience (highly desirable) ✔ IPAF certification ✔ Strong fault-finding and diagnostic skills ✔ Ability to manage workloads and meet deadlines ✔ Excellent customer service skills ✔ Industrial or heavy commercial experience preferred ✔ Honest, reliable and safety-driven mindsetThis role would particularly suit an engineer currently working in retail/supermarket refrigeration who wants to progress into the industrial/heavy commercial sector.
The Opportunity
We are a growing team of specialist engineers working on complex and technically interesting plant. You’ll be supported by an experienced Service Manager and given opportunities to develop technically while significantly increasing your earning potential.If you’re ambitious, technically capable, and ready to move into industrial refrigeration — we want to hear from you.Aqumen Business Solutions is acting as an Employment Agency in relation to this vacancy.....Read more...
Dive into the hands-on world of Civil Engineering design. You’ll be producing detailed drawings and technical models for crucial infrastructure projects, including state-of-the-art clean and wastewater treatment works, high-capacity pumping stations, and resilient pipeline networks.
You'll be trained to master powerful industry software such as Computer Aided Design (CAD), especially AutoCAD Civil 3D, and GIS (Geographic Information Systems) to accurately map, model, and visualise solutions. Training Outcome:Civil Engineer, Project Management. Employer Description:The Stantec community unites more than 34,000 employees working in over 450 locations across 6 continents. We have been working with our clients and communities in the UK for over 150 years. We plan, design, deliver and manage the development and infrastructure needed to support the creation of sustainable, healthy and prosperous communities. Our teams provide effective and relevant solutions, translating our clients’ vision into valued consents, deliverable plans for projects and programmes, and efficient designs for delivery, based on technical excellence and deep market insights. We deal with today’s challenges, but also keep a fairer, better tomorrow in sight, looking at how we deliver clean growth, support radical changes in our economy and meet the needs of future communities. Building an inspired, inclusive work environment that attracts, supports, and develops world-class talent is a crucial key to our success. If you are excited by this role but worry that your experience doesn’t exactly align, we encourage you to apply.Working Hours :Monday - Friday. shifts TBC.Skills: Communication skills,Problem solving skills,Team working....Read more...
We are seeking an experienced FPGA Engineer to join a collaborative engineering team developing advanced electronic systems used in high-performance, security-focused environments.
This role offers the opportunity to work on technically challenging programmes where FPGAs play a central role, supporting applications such as high-speed data processing, complex algorithm implementation, embedded security functions, system-level integration within modern hardware platforms.
You will work alongside engineers across firmware, software, systems, and hardware disciplines, contributing to innovative solutions in a structured, quality-driven development environment.
The team operates using modern development practices, including advanced toolchains and Continuous Integration workflows.
Key Responsibilities
- Design and develop FPGA solutions using VHDL
- Deliver efficient implementations with strong focus on timing closure and device optimisation
- Target AMD FPGA and SoC devices, including use of the AXI protocol
- Perform simulation using Siemens QuestaSim
- Apply modern verification approaches (e.g. OSVVM, CoCoTB)
- Use AMD toolchains (ISE and Vivado)
- Develop and maintain scripted build processes using TCL and/or Python
- Work within Git-based version control systems
- Support Continuous Integration environments (e.g. GitLab, Docker)
- Produce clear technical documentation
- Contribute to process improvement and engineering best practice
What Were Looking For
- Strong background in FPGA design using VHDL
- Experience with AMD FPGA/SoC platforms
- Solid understanding of FPGA architecture, optimisation techniques, and timing analysis
- Experience with simulation and verification methodologies
- Familiarity with automated build and CI workflows
- Good documentation and communication skills
- A proactive, adaptable approach with the ability to work independently and collaboratively
Development & Environment
You will join an established firmware community with a strong emphasis on:
- Technical mentoring
- Knowledge sharing
- Continuous professional development
- Toolchain and workflow modernisation
- Collaborative problem-solving
Comprehensive training and close technical leadership will be provided to support your growth and mastery of internal development processes.
Benefits
- Competitive salary with sign-on bonus.
- Flexible or part-time working arrangements on request.
- Relocation support available.
- Half-day finish on Fridays.
- 25 days holiday (plus bank holidays), increasing with service, with option to buy/sell.
- Private medical insurance (optional family cover).
- Life assurance and group income protection.
- Flexible extras including healthcare cash plan, dental insurance, gym membership, cycle-to-work scheme, and electric vehicle scheme.
- Employee assistance program for mental health and wellbeing support.
Eligibility
Due to the nature of the programmes involved, candidates must:
- Hold the right to work in the UK (Sole British citizenship)
- Be eligible to obtain the required security clearance
TT....Read more...
Senior Software Tester / QA Engineer – Up to £44,000 PA
Southampton – Hybrid Working
We are working with a well-established technology organisation to recruit an experienced Senior Software Tester / QA Engineer to play a key role in the delivery of customer-facing systems and core software products.
This position sits within a professional services environment and involves testing both standard solutions and complex, customer-specific implementations. You will work closely with developers, project managers and technical stakeholders, taking ownership of testing activities and ensuring systems meet defined quality standards prior to release and go-live.
As a Senior Software Tester, you will be responsible for driving software quality through effective manual and automated testing practices. You will contribute to the ongoing improvement of testing processes, support customer UAT, and act as a subject-matter expert for QA activities across projects, identifying and resolving defects early in the delivery lifecycle.
Key responsibilities:
Leading and executing software testing activities on customer systems prior to installation and go-live
Designing, writing and maintaining robust manual and automated test scripts
Owning the creation and maintenance of test plans, test cases and supporting documentation
Working collaboratively with development and technical teams to identify, log, prioritise and resolve defects
Creating and managing test data to support functional, regression and integration testing
Supporting and coordinating user acceptance testing, including direct customer engagement
Providing go-live support and post-deployment validation where required
Contributing to the continuous improvement of testing standards, tools and methodologies
Providing guidance and best practice advice to customers during UAT and test planning
Supporting internal product testing and mentoring junior team members where appropriate
Requirements:
Proven experience in a Software Testing / QA role, operating with a high degree of autonomy
Strong hands-on experience with manual testing across complex systems
Demonstrable experience designing and maintaining comprehensive test documentation
Experience working in Windows Client and Server environments
Confident use of Microsoft Office applications for test reporting and documentation
Highly advantageous experience:
ISTQB Foundation or Advanced certification
Experience with test automation tools and frameworks (Ranorex, Selenium or similar)
Exposure to C#, Java, or other object-oriented programming languages
Experience with SQL Server and/or Oracle databases, including querying and data validation
Experience using source control tools such as TFS or Git
Understanding of network architecture, IT security and Active Directory
Experience within document management, OCR or enterprise systems environments
The role may involve occasional UK and international travel.
Hybrid working is available once probation is passed, with 1–2 days per week on site.....Read more...
Job Description:
Job Title: Multi-Skilled Maintenance EngineerLocation: Low Moor, BradfordWorking Hours: Monday to Friday, 8:00 AM to 5:00 PM (overtime available)Job Description:We are looking for a genuinely multi-skilled Maintenance Engineer to join our clients team in Low Moor, Bradford. This is a diverse, hands-on role in a fast-paced manufacturing environment where you'll be expected to work across both mechanical and electrical systems.You’ll be responsible for carrying out a wide range of planned and reactive maintenance tasks, supporting continuous production, and ensuring the safe and efficient operation of all plant equipment.Key Responsibilities:Mechanical & Electrical Maintenance:
Maintain and repair mechanical systems: belts, chains, bearings, pipework, pumps, valves, and filters.Work on pneumatic and hydraulic systems including solenoids, actuators, rams, and compressors.Fault-find and repair basic electrical issues, including sensors, switches, fuses, relays, and overloads.Carry out safe isolation of electrical equipment and support minor electrical installations or modifications.Understand and work with steam systems, boilers, control valves, and water softening equipment.Diagnose and resolve faults in automated and computer-controlled machinery.Support continuous improvement and preventative maintenance initiatives.
Essential Skills & Experience:
Demonstrable experience in a similar multi-skilled maintenance role within manufacturing or industrial environments.Strong mechanical and electrical fault-finding abilities.17th / 18th Edition qualifiedConfident working safely with 3-phase systems, basic control panels, and low-voltage equipment.Skilled in using diagnostic tools and interpreting technical documentation.Comfortable working across a wide range of systems from pneumatics and hydraulics to electrical controls.
Desirable Skills & Experience:
Familiarity with PLC-controlled equipment (understanding inputs/outputs, basic diagnostics).Experience with steam and compressed air systems.Experience with continuous improvement or lean manufacturing practices.
Personal Attributes:
Versatile, hands-on, and proactive.Strong communication and problem-solving skills.Able to work independently and collaboratively in a team.Reliable, detail-oriented, and safety-conscious.
If you're a capable and well-rounded Multi-Skilled Engineer looking to bring your talents to a forward-thinking team, we’d love to hear from you
....Read more...
Are you ready to advance your career in marine technology? Our partner are growing their national team of Marine Electronics Technicians and Engineers, whether you're just starting out or an experienced professional ready to lead projects and mentor others, we have the right opportunity for you.
Join a dynamic team that delivers cutting-edge navigation, communication, and safety systems to commercial vessels. Youll be working hands-on with industry-leading equipment, ensuring vessels remain operational, compliant, and connected. The company value initiative, technical skill, and a customer-first approach; if that sounds like you, we want to hear from you.
What Youll Be Doing:
- Installing and commissioning marine electronics on vessels
- Performing maintenance, repairs, and equipment surveys
- Supporting customers with diagnostics and fault resolution
- Identifying service opportunities and recommending solutions
- Delivering projects across the UK and occasionally overseas
What Were Looking For:
- HNC/HND in Electronics or Electrical Engineering (or equivalent)
- Experience in:
-
- Marine or field-based electronics
- Electronic navigation and communication systems
- Fault-finding and installation
- Technical support and project engineering
Skills:
- Strong problem-solving ability
- Clear communication and customer-focused mindset
- Essential: Full UK driving licence
Desirable (but not essential):
- GMDSS Operators Certificate
- Radio/VDR Survey or Class Approval experience
- BOSIET/OLF Certification
- Manufacturer-specific training
Medical: Must be able to pass a medical and annual working at height training
Whats On Offer:
- Competitive salary (based on qualifications and experience)
- Company car
- Employer contribution pension scheme
- Career development pathways from Technician to Senior Engineer
- Training opportunities and autonomy in your role
Apply now and be part of the future of marine electronics.
TT....Read more...
Are you ready to advance your career in marine technology? Our partner are growing their national team of Marine Electronics Technicians and Engineers, whether you're just starting out or an experienced professional ready to lead projects and mentor others, we have the right opportunity for you.
Join a dynamic team that delivers cutting-edge navigation, communication, and safety systems to commercial vessels. Youll be working hands-on with industry-leading equipment, ensuring vessels remain operational, compliant, and connected. The company value initiative, technical skill, and a customer-first approach; if that sounds like you, we want to hear from you.
What Youll Be Doing:
- Installing and commissioning marine electronics on vessels
- Performing maintenance, repairs, and equipment surveys
- Supporting customers with diagnostics and fault resolution
- Identifying service opportunities and recommending solutions
- Delivering projects across the UK and occasionally overseas
What Were Looking For:
- HNC/HND in Electronics or Electrical Engineering (or equivalent)
- Experience in:
-
- Marine or field-based electronics
- Electronic navigation and communication systems
- Fault-finding and installation
- Technical support and project engineering
Skills:
- Strong problem-solving ability
- Clear communication and customer-focused mindset
- Essential: Full UK driving licence
Desirable (but not essential):
- GMDSS Operators Certificate
- Radio/VDR Survey or Class Approval experience
- BOSIET/OLF Certification
- Manufacturer-specific training
Medical: Must be able to pass a medical and annual working at height training
Whats On Offer:
- Competitive salary (based on qualifications and experience)
- Company car
- Employer contribution pension scheme
- Career development pathways from Technician to Senior Engineer
- Training opportunities and autonomy in your role
Apply now and be part of the future of marine electronics.
TT....Read more...
To support the servicing, maintenance, and repair of gas CHP (Combined Heat and Power) systems while undertaking a structured apprenticeship program
Assist in the planned and reactive maintenance of gas CHP units across customer sites
Shadow experienced engineers to learn diagnostic and fault-finding techniques.
Support the installation, commissioning, and decommissioning of CHP systems
Record service data accurately using company reporting tools and software
Maintain tools, equipment, and company vehicle in good condition (if applicable)
Attend all required training courses (on-the-job and classroom-based)
Build a working knowledge of CHP system components including engines, generators, controls, and gas systems
Develop customer-facing professionalism while working on live sites
Always adhere to health and safety protocols
Training:Apprentices will be required to attend training at least x1 day per week to complete necessary mandatory training and units associated with the apprenticeship.
The apprentice will be required to complete:
Work towards gaining a full Qualification
Employment Rights and Responsibilities
Skills, Knowledge, and Behaviours
Standard and End Point Assessment
Functional Skills in English, maths, and ICT (if required)
Other training will be provided by the employer as required to enable the fulfilment of the job role. Product specific training provided as part of our internal CPD by uk providers and our training facility in Germany. Training Outcome:
The apprentice will gain the technical skills, safety awareness, and experience required to progress toward becoming a qualified CHP Service Engineer, Commissioning Engineer
Employer Description:Manufacture, install and maintain gas fired CHP plants throughout the UK.Working Hours :Monday - Friday, 8.00am - 5.00pmSkills: Attention to detail,Communication skills,IT skills,Organisation skills,Customer care skills,Problem solving skills,Administrative skills,Analytical skills,Number skills,Logical,Team working,Creative,Initiative,Physical fitness....Read more...
As a People Data Engineering Apprentice, you’ll play an active role in building and maintaining the systems that help us transform raw data into meaningful insights. Over the course of your Level 5 Data Engineer apprenticeship, you’ll develop your technical and professional skills while working on real projects that make a difference globally. You’ll be supported by experienced colleagues, a structured on-the-job learning plan, and a strong early careers community, helping you develop the technical, professional, and problem solving skills to thrive in data.
What will I be doing?
You’ll be part of the People Data & Solutions team, supporting the end-to-end data lifecycle: ingestion, storage, transformation, and quality - so that analysts, data scientists, and business teams can rely on trusted insights.
Data Engineering & Technical
Work with people data models to understand how data is structured and used.
Help design, build, and maintain data pipelines from structured, semi structured, and unstructured sources.
Support ETL processes: clean, validate, and transform data for downstream use.
Monitor pipelines, investigate issues, identify root causes, and support fixes.
Contribute to data quality frameworks (accuracy, completeness, consistency, timeliness).
Support deployment of new data processes and maintain technical documentation.
Data Governance & Compliance
Follow data governance, privacy, and security standards.
Maintain accurate records and audit logs.
Analyse data flows to identify gaps, risks, or inconsistencies.
Handle confidential information with professionalism.
Operational & Administrative
Help prepare routine people data reports and dashboards.
Respond to data access and data quality queries in a timely manner.
Assist with small-scale data projects, meeting deadlines with strong attention to detail.
Support the HR Systems Specialist with data-related system updates and improvements.
Collaboration & Continuous Improvement
Work closely with analysts, data scientists, HR, and business teams to understand data needs.
Contribute ideas that improve processes, tools, and documentation.
Stay curious about data engineering, cloud, and AI—bringing new ideas to the team.
Training Outcome:Prospects of permanent contract after completion of apprenticeship or support in pursuing further apprenticeships if desired.Employer Description:Buro Happold are a global practice of engineers, designers and advisers committed to delivering elegant, sustainable solutions that positively impact communities and the environment. Join us in shaping a transformative future.Working Hours :Monday to Friday, 9am to 5.30pmSkills: Attention to detail,Organisation skills,Problem solving skills,Microsoft Office,Interest in data,Strong communicator,Professional and approachable,Prioritising multiple tasks,Able to adapt to change,Collaborative and respectful,Proactive,Accountable....Read more...
You will be based within the office administration and accounts team in Wilmington, Dartford. The role will support the day-to-day running of the office.
Key duties will include;
Answering phone calls and emails
Assisting with customer enquiries
Updating internal systems and helping coordinate engineer appointments and service visits
You will also;
Support the accounts team with basic financial administration
Filing invoices
Updating records
Assisting with purchase orders.
The role will provide hands-on experience in administration, customer service, IT systems, and office organisation while working as part of a busy team. As experience develops, you will gradually take on more responsibility within both the administration and accounts functions of the business.Training:On-the-job support will be provided through guidance and supervision from experienced office staff and management during day-to-day administrative tasks and responsibilities.
Training Outcome:Successful completion of the apprenticeship could lead to a permanent role within the company, with opportunities to progress into positions such as Service Coordinator, Accounts Assistant, Sales Assistant or Technical Support. The skills gained are also highly transferable across the engineering, construction, and facilities management sectors.Employer Description:Cool 365 Ltd is a specialist air conditioning and ventilation company providing design, installation, service, and maintenance across London and the Southeast. Working with both residential and commercial clients, the company delivers high quality climate control solutions using leading manufacturers such as Mitsubishi Electric and Daikin.
Cool 365 is a growing business with a strong reputation for professionalism, technical expertise, and customer service. An apprentice joining the team will gain hands on experience within a supportive environment, learning how a busy engineering and service business operates while developing valuable administrative and organisational skills.Working Hours :Mon-Fri 08:30-17:30.Skills: IT skills,Communication skills,Attention to detail,Organisation skills,Team working,Initiative....Read more...
General duties including:
Assisting with the supervision of specialist trenchless and tunnelling crews on live construction sites
Supporting the control of health, safety, and environmental standards in challenging underground environments
Recording and reporting progress, quality, and productivity on tunnelling and shaft works
Helping with surveying, setting out, and quality assurance during microtunnelling and pipe jacking operations
Monitoring materials, plant, and subcontractors, ensuring works meet design and safety requirements
Assisting commercial and project teams with cost tracking and documentation to support project delivery
Training:
Construction site supervisor Level 4 (Higher national certificate)
Training will be at Doncaster College where you will access a wide range of facilities on offer
Day release.
You will undertake Construction Site Supervisor Level 4 Standard.
Construction site supervisor / Institute for Apprenticeships and Technical Education
You will undertake Functional Skills for English and/or Maths if needed.
You will undertake both on and off-the-job job training by a team of industry-qualified professionals to give you the best skills, knowledge, and experience.
Training Outcome:
On successful completion of the apprenticeship, you’ll have the skills and experience to progress into a Site Engineer or Construction Site Supervisor role within HB Tunnelling
With further experience and training, you can advance to Sub Agent, Project Engineer, or Site Manager, working on major tunnelling and trenchless infrastructure schemes across the UK
The company actively supports continued professional development and progression toward EngTech or Incorporated Engineer (IEng) status through recognised industry bodies such as the ICE or CIHT
Employer Description:HB Tunnelling Limited is a specialist civil engineering contractor delivering trenchless and tunnelling solutions across the UK. We work on major infrastructure projects for leading utilities and construction clients, using innovative techniques such as microtunnelling, auger boring, pipe jacking, and shaft construction. Our teams are passionate about safety, quality, and developing the next generation of tunnelling professionals through hands-on training and career progression.Working Hours :Monday - Friday, 07:30 - 17:30 with 2 x 30 minute breaks.Skills: Communication skills,IT skills,Attention to detail,Organisation skills,Customer care skills,Problem solving skills,Administrative skills,Number skills,Analytical skills,Logical,Team working,Creative,Initiative,Physical fitness....Read more...
Shift Engineer – FM Service Provider – Healthcare - No Call Out – Fitzrovia – Up to £50,000 CBW Staffing Solutions are currently recruiting a Shift Engineer to join a leading healthcare site in West London. This site is a modern, state-of-the-art facility with multiple specialist areas and cutting-edge equipment. You will be part of a well skilled team of engineers who know the site inside out and will help you get up to speed quickly. The campus supports a large workforce and offers excellent amenities including multiple food outlets and break areas, ensuring you have everything you need during your working day.This is a fantastic opportunity to work in a supportive, collaborative environment, maintain complex Electrical systems, and gain experience across a variety of high-tech facilities Key duties & responsibilitiesOperate, monitor, and maintain all hospital electrical systems to ensure continuous, safe, and compliant operation.Carry out planned preventative maintenance (PPM) and reactive maintenance on LV/HV systems, generators, UPS, emergency lighting, and critical power systems.Respond promptly to electrical faults, breakdowns, and emergency call-outs, ensuring minimal disruption to clinical services.Ensure compliance with statutory regulations, HTM (Health Technical Memoranda), HSG, and current IET Wiring Regulations.Monitor Building Management Systems (BMS) and electrical control systems, identifying and rectifying issues proactively.Support the operation and testing of standby power systems, including generators and uninterruptible power supplies.Complete accurate maintenance records, risk assessments, permits to work, and shift handover reports.Act as the on-site electrical duty engineer during shifts, escalating critical issues appropriately.Work closely with clinical staff, estates teams, and external contractors to maintain a safe working environment.Ensure all works are carried out in line with hospital infection control, health & safety, and safe systems of work.Participate in shift rotation, including nights, weekends, and on-call duties as required.Assist with electrical isolations, system upgrades, and minor project works. Package:Up to £50,00020 days holidayOvertime Opportunities4 on 4 off days and nights 7am - 7pmFurther training Career Progression Requirements:Level 2 or 3 in Electrical 18th edition if electrically qualified Previous experience in a hospital, medical facility, or critical-care environment preferred.Strong background in electrical installations or maintenance. Please send your CV to Fin Havering of CBW Staffing Solutions to avoid missing out on the role!....Read more...
Mechanical Maintenance Engineer
Location: Desford Shift Pattern: 4 on 4 off (Days & Nights) Salary: £55,000 + Up to £3,000 Annual Bonus Pension: 15% Total (10% Employer / 5% Employee)
Overview
We are recruiting for a Mechanical Maintenance Engineer to join a large, well‑established engineering team at a brand‑new, highly automated manufacturing site in Desford. This is an exciting opportunity to join one of the fastest‑producing facilities in Europe, operating within a dusty but cutting‑edge environment filled with modern automated machinery.
The Role
As a Mechanical Maintenance Engineer, you will be responsible for maintaining and improving a wide range of production equipment. Your key responsibilities include:
Key Duties
Mechanical fault finding and repair across fast‑paced production machinery
Conducting planned preventative maintenance (PPM)
Responding to breakdowns and reducing engineering downtime
Working on conveyors, mixers, ovens, and kilns
Supporting the wider engineering team within a highly automated environment
Ensuring all engineering activities are carried out safely and efficiently
Working Hours / Overtime Structure
4 on 4 off, rotating days and nights
296 banked hours annually, reducing to 206 hours after daily handover (5:30–6:00)
206 hours is equivalent to 18 days of overtime per year
Overtime during holiday cover on weekends is paid at time and a half
Any other overtime is also paid at time and a half
About You – Essential Criteria
Must be mechanically qualified (NVQ Level 3 or above)
Experience within FMCG or heavy industrial environments
Strong mechanical fault-finding skills
Ability to work effectively in a dusty, high-output manufacturing site
Industries Considered
FMCG
Heavy Industrial / Process
Automated manufacturing environments
Environment & Machinery
Dusty environment with state‑of‑the‑art automation
Working on equipment such as:
Conveyors
Mixers
Ovens
Kilns
Team Structure
You will join a large engineering team of around 20 engineers, offering strong peer support, cross‑training and excellent knowledge sharing.
Benefits
£55,000 salary + up to £3,000 bonus
15% pension (10% employer contribution)
Overtime paid at time and a half
Opportunity to work at one of the fastest‑producing manufacturing sites in Europe
Career development and progression opportunities
Why Is This Role Available?
Position has become available due to an engineer leaving the business.
Interview Process
Stage 1: Informal technical conversation with Carl, focused on experience and CV details.
Stage 2: On‑site interview with an engineer. Candidates must bring overalls and safety shoes and may complete a basic practical assessment, including panel work and a site walk around.
....Read more...
The Mechanical Manufacturing Engineer is responsible for complex electronic assemblies. Performing the lead role in implementing manufacturing processes and techniques using LEAN and Six Sigma tools.
Experience
Min BSc or BEng in Mechanical, Industrial Engineering (or similar)
Manufacturing especially Electronic assembly
Lean and Six Sigma
Production Workflow
Non-Conformance Management
Technical Investigation Support
Production Test and Assembly
Manufacturing Resource Planning System
Responsibilities
Lean Six Sigma
Responsible for the implementation of key elements of Lean, such as: standardized work instructions, line balancing, layout and work sequence (routing) optimization, training development matrix, Value Stream Mapping, Kaizen/5S workouts, pull processes, TPM (total preventive maintenance), cell design, and quick changeover/batch-size optimization.
Processes
Implement process improvements to achieve manufacturing excellence in areas such as process yield (e.g. First Pass Yield, Rolled Throughput Yield), cycle time reduction and productivity.
Provide shop floor feedback on product design and manufacturability issues to Engineering and DFMs (e.g. through the use of Engineering Change Requests - ECRs).
Review and sign-off on Engineering Change Orders that impact Inventory - including product life cycle issues, obsolescence, etc.
Creates, implements, and monitors key performance indicators and metrics on manufacturing process capability and product quality.
Monitoring and reducing process costs.
Quality
Responsible to assist with investigation, root cause analysis and corrective action implementation for manufacturing quality issues.....Read more...
