Role & responsibilities:
Training, instruction and personal development will form the foundations for an individual to become a productive member of the engineering/site services team.
The following is a summary of the core principles and behaviours expected and the job specific knowledge and skills associated with being an engineering/site services operative.
General Core Skills
Work safely at all times, complying with health and safety legislation, regulations, environmental compliance procedures and systems and other relevant guidelines
Identify and deal appropriately with any risks, hazards, hazardous situations and problems that may occur within the engineering environment within the limits of their responsibility
Demonstrate effective communication skills which include oral, written, electronic
Complete appropriate documentation accurately, efficiently and legibly using the correct terminology where required
Obtain and follow the correct documentation, specifications and work instructions in accordance with time constraints and the roles and responsibilities identified for the engineering activities, extracting the necessary data/information from specification and related documentation
Select and use appropriate tools, equipment and materials to carry out the engineering operation
Deal appropriately with any problems that may occur within the manufacturing environment within the limits of their responsibility
Work efficiently and effectively at all times maintaining workplace organisation and minimising waste
Knowledge
Basic handling, manual and mechanical equipment
Use and checking of relevant tools and specific engineering equipment
Hot works, welding and cutting
Working at height and enclosed spaces including use of associated access and safety equipment
Basic electrical
Maintenance planning
Diagnostic and fault finding techniques
Specific safe working practices, maintenance procedures and environmental regulations that need to be observed
Specific safe working practices, isolation procedures and safe reinstating of equipment/system that need to be observed
Specific Skills
Carry out fault location on appropriate equipment using suitable maintenance diagnostic techniques
Carry out maintenance activities in line with work instructions
Carry out tests on the maintained equipment in accordance with test schedule/defined test procedures
Follow appropriate completion activities and restore equipment to service by replacing or repairing components
Carry out quality checks during and after mechanical manufacturing operations
Wire and terminate different types of cabling
Test a range of electrical components
Fabricate materials using the appropriate methods and techniques
Join materials using the appropriate methods and techniques
Training:You will study on a Level 3 Mechatronics Maintenance Technician apprenticeship. On completion of this, you will gain a qualification in Engineering at Level 3 standard.
During the first year of the apprenticeship, your learning will take place at the University of Sheffield’s AMRC Training Centre based at Catcliffe, Rotherham, for an initial block of study on a full-time basis. After this, you will attend the training centre for one day a week for knowledge study.Training Outcome:Completion of the University of Sheffield’s AMRC Training Centre apprenticeships are nationally recognised qualifications which are acknowledged and respected by employers across the world. These can open the door to many more opportunities, such as Engineering Management and Project Engineering positions across a range of sectors worldwide.Employer Description:Homefire Group, a part of Invica Industries, is the UK's leading smokeless fuel and kiln-dried firewood manufacturer and supplier, putting sustainable warmth and comfort at the heart of your home. We’ve been keeping homes warm and cosy for nearly 300 years. We operate from over 40 locations in England, Wales and Scotland, including the Isle of Man and the Isle of Wight. Additionally, Homefire Group is Europe's leading manufacturer of smokeless solid fuels.
We have a range of market-favourite brands and a strong commitment to new product development, leading the industry in technical advances and growing our consumer base. We are on a journey to cleaner and greener products, and by buying our Homefire range, our customers can be assured that they are receiving great quality fuel every single time.Working Hours :You will work Monday to Friday. Your start and finish times including your shift pattern will be determined by the employing company.Skills: Communication skills,Attention to detail,Organisation skills,Analytical skills,Logical,Team working,Initiative,Patience....Read more...
VPI Damhead are looking for an apprentice to train alongside our existing, experienced team. As an apprentice you will study a range of programmes working towards a Level 3 Maintenance & Operations Engineering Technician Apprenticeship standard, covering a variety of skills and qualifications while earning a wage and completing invaluable practical skills in industry. You will be working alongside a mentor and assisting the experienced process shift team with the following duties:
Main Duties and responsibilities.
Start-up & shutdown the plant process as per operating procedures
Operating the plant and process within the set production and safety parameters
Take samples as per the sampling schedule and procedure
Complete daily logs and make notes of operational events and communicate to the Shift Team Leader and oncoming shift team
Assist in the return to service of new plant and equipment
Assisting in carrying out permit to work isolations, de-isolations
Report any Health & Safety issues / incidents
Report any Engineering issues
Ensure good housekeeping standards are maintained on plant
Other responsibilities:
Ensure correct stock control of any raw materials used on plant
Ensure control of emergency equipment and PPE in the area
Ensure correct control of any waste streams and assist in the management of the controlled waste zone
Due to Health and Safety requirements for shift working, all apprentices must be 18 years of age by April 2025 when they leave their studies at IPS continue their apprenticeships on site.
What we can offer you
Competitive apprenticeship salary
Exceptional training and development programme
25 days holiday + bank holidays
A Flexible programme that is employer led with bespoke training modules
Exceptional reward and recognition events
Additional Training and Development Plans – see details below
The role will occasionally involve some working at height, work within in confined spaces, and work with PPE required when working with chemicals. Specific training will be provided for these aspects of the role.
*New applicants who meet the entry requirements of the role will be contacted by the Apprentice Employment Agency team to discuss your application and the apprenticeship in further detail. Please ensure you provide up to date contact details and check your junk in case of redirected emails. Failure to respond to communications will result in your application being withdrawn.Training:Level 3 Maintenance and Operations engineering technician
Engineering technicians in the wider advanced manufacturing and Engineering Sector take responsibility of quality and accuracy within the limits of their personal authority. Demonstrate a core set of behaviours in order to be competent in their job role and complement wider business strategy and development.
The delivery of this Apprenticeship Standard requires a full year off the job training at the
IPS Training centre. Within the first year the Apprentice will attend four days in the week, completing practical skills within the IPS Rochester workshop (foundation competence units) and they will attend one day a week, studying the Technical Certificate. In Year 2 the Apprentice moves to day release and will attend the Training Centre one day a week to continue the Technical Certificate, continuing until they are ready for End Point Assessment in Year 3. The Apprentice will continue to receive regular training contact with IPS all throughout the programme.
Core Knowledge:
A Technician will understand:
First principles relating to the operation and maintenance of appropriate plant and equipment
Relevant industry health and safety standards, regulations, and environmental and regulatory requirements
Maintenance and operational practices, processes and procedures covering a range of plant and equipment
The relevant engineering theories and principles relative to their occupation
Core Skills:
A Technician will apply their knowledge of plant and systems to safely perform maintenance and operational activities with minimum supervision. This will require them to:
Comply with industry health, safety and environmental working practices and regulations
Locate, and rectify faults on plant and equipment
Communicate with and provide information to stakeholders in line with personal role and responsibilities
Read, understand and interpret information and work in compliance with technical specifications and supporting documentation
Prepare work areas to undertake work related activities and reinstate those areas after the completion of the work-related activities
Inspect and maintain appropriate plant and equipment to meet operational requirements
Assess and test the performance and condition of plant and equipment, and communicate, handover and confirm that the appropriate engineering process has been completed to specification.
Successful achievement of the end-point assessment will lead to final certification of the apprenticeship.Training Outcome:Progression subject to performance, the position comes with personal development throughout your career with VPI and support to deliver the businesses objectives. Support to study and achieve an H.N.C. in a relevant operations discipline within 3 years.Employer Description:An apprenticeship with VPI is a great opportunity to put both theoretical and practical learning into practise. We are one of the largest energy producers in the UK with five operational Combined Cycle Gas Turbine (CCGT) sites totalling a fleet capacity of 3,119 Megawatts. This is an apprenticeship where you will have the opportunity to make a tangible difference. Not only will you learn valuable skills as you start out on your career, but you will also be doing so in one of our CCGT sites that provides required power and stability to the national grid.Working Hours :(08:00 – 16:00) Monday to FridaySkills: Communication skills,IT skills,Attention to detail,Organisation skills,Customer care skills,Problem solving skills,Presentation skills,Administrative skills,Number skills,Analytical skills,Logical,Team working,Creative,Initiative,Non judgemental,Patience....Read more...
This is a fantastic career opportunity to become a qualified Electrical and Instrumentation (E&I) Engineer via a four-year apprenticeship programme. As an apprentice you will:
Train through a dual approach of academic study to Higher BTEC level and vocational (practical work-based) experience
Your academic studies will take place via external learning partners and vocational training
You will also receive the support of course tutors, workplace coaches and mentors to help you along the way and enable you to develop your skills and potential
The opportunity provides successful candidates the chance to work in the largest paper mill in the United Kingdom and the second across Europe, maintaining and developing powerful machinery capable of producing a wide range of high-performance papers.
Your duties will include:
Appreciation of Preventative and Reactive maintenance, the tools/processes available to support efficient asset maintenance. SAP, Workflow Processes, Condition Based
Plan and execute preventative maintenance activities using the workflow process tools and resources. Develop/implement routine maintenance procedures
Participate in engineering development activities utilising and following procedures and standards
Use problem-solving techniques/tools to identify a suitable resolution to problems
Full integration in DS Smith Way awareness training, using these Lean tools to improve daily work
Training:Year 1 of the Level 3 Maintenance and Operations Engineering Technician Apprenticeship Standard, the learner will attend four days a week within IPS Rochester workshop completing practical skills (Performing Engineering Operations) and one day a week studying the Technical Certificate. In Year 2, the apprentice moves to day-release and will attend IPS one day a week to continue the Technical Certificate. Starting in Year 2 and continuing until completion in Year 4. The apprentice will continue to receive regular training contact with IPS all throughout the programme.Training Outcome:Upon successful completion of the apprenticeship there is the possibility of gaining a permanent position within a team of highly skilled engineers.
Further training is encouraged, with the Higher BTEC qualification as part of the apprenticeship timescale. There will also be the possibility of further progression and additional training upon successful completion of a Level 3 Advanced Apprenticeship, potentially onto the Level 4 Higher Apprenticeship.Employer Description:Together with International Paper, we are the global leader in sustainable packaging. Headquartered in Memphis, Tennessee, USA and London, England, we employ more than 65,000 colleagues with manufacturing operations in North America and Europe, Middle East and Africa (EMEA). Together with our customers, we make the world safer and more productive, one sustainable packaging solution at a time.Working Hours :Monday – Friday, 08:00am – 4:00pm.Skills: Communication skills,Problem solving skills,Team working,Reliable,Time Management,Motivated....Read more...
This is a fantastic career opportunity to become a qualified mechanical Engineer via a four-year apprenticeship programme. As an apprentice you will:
Train through a dual approach of academic study to Higher BTEC level and vocational (practical work based) experience.
Your academic studies will take place via external learning partners and the vocational training.
You will also receive the support of course tutors, workplace coaches and mentors to help you along the way and enable you to develop your skills and potential.
The opportunity provides successful candidates the chance to work in the largest paper mill in the United Kingdom and the second across Europe, maintaining and developing powerful machinery capable of producing a wide range of high-performance papers.
Your duties will include:
Appreciation of Preventative and Reactive maintenance, the tools/processes available to support efficient asset maintenance
SAP, Workflow Processes, Condition Based
Plan and execute preventative maintenance activities using the workflow process tools and resources
Develop/implement routine maintenance procedures
Participate in engineering development activities utilising and following procedures and standards
Use Problem Solving techniques/tools to identify a suitable resolution to problems
Full integration in DS Smith Way awareness training, using these Lean tools to improve daily work
Training:Year 1 of the Level 3 Maintenance and Operations Engineering Technician Apprenticeship Standard, the learner will attend four days a week within IPS Rochester workshop completing practical skills (Performing Engineering Operations) and one day a week studying the Technical Certificate.
In Year 2, the Apprentice moves to day-release and will attend IPS one day a week to continue the Technical Certificate. Starting in Year 2 and continuing until completion in Year 4. The Apprentice will continue to receive regular training contact with IPS all throughout the programme.Training Outcome:Upon successful completion of the apprenticeship there is the possibility of gaining a permanent position within a team of highly skilled engineers.
Further training is encouraged, with the Higher BTEC qualification as part of the apprenticeship timescale. There will also be the possibility of further progression and additional training upon successful completion of a Level 3 Advanced Apprenticeship, potentially onto the Level 4 Higher Apprenticeship.Employer Description:Together with International Paper, we are the global leader in sustainable packaging. Headquartered in Memphis, Tennessee, USA and London, England, we employ more than 65,000 colleagues with manufacturing operations in North America and Europe, Middle East and Africa (EMEA). Together with our customers, we make the world safer and more productive, one sustainable packaging solution at a time.Working Hours :Monday- Friday
8:00am- 4:00pmSkills: Communication skills,Problem solving skills,Team working,Reliable,Time Management,Motivated....Read more...
Why do an apprenticeship at CBRE?
Structured Learning & Hands-On Experience: Our Level 3 Engineering Apprenticeship is designed for your success. You'll follow a structured curriculum, balancing classroom learning with hands-on experience, gaining practical skills in electrical, mechanical, and HVAC systems, building automation, and more ensuring a well-rounded skill set
Earn While You Learn: Say hello to financial independence. CBRE’S apprenticeship programme allows you to earn a competitive salary while gaining valuable skills and knowledge. It’s not just an education; it’s an investment in your future
Cutting-Edge Facilities Management: At CBRE, we redefine excellence in facilities management. Join a company that pioneers state-of-the-art solutions, embracing innovation and sustainability to shape the future of the industry
Career progression: With over 25,000 sites across the UK managing multiple sectors ranging from Technology, Stadia, Museums to Iconic buildings, CBRE is the perfect platform to launch your career
What will you be doing?
During this four-year programme, you will be assigned to one our Business Unit’s engineering team at client locations where you will combine on-the-job learning with academic study. This will include but is not limited to:
Attending college to complete your Level 3 engineering maintenance apprenticeship programme-based framework combined with day(s) release leading to recognised NVQ qualifications
Achieving professional Engineering Technician (EngTech Level 3) registration on completion of NVQ qualification
Maintaining a logbook over the duration of the apprenticeship period, recording projects and documenting work that has been undertaken and the skills learned
Learning and understanding the importance of Health and Safety within the workplace
Becoming proficient in the application and use of a wide range of hand tools and associated workshop machine tools
Learning to understand and interpret engineering drawings
Developing the skills to carry out both planned and reactive maintenance from written and verbal instructions and drawings within an assigned trade
Undertaking tasks as instructed, increasing overall contribution to the business unit
Ensuring general good housekeeping of the workplace and client locations
The Application process:
Online job-focused testing
Assessment Centre (held in April)
Onsite interview
Training:Attending college to complete your Level 3 engineering maintenance apprenticeship programme-based framework combined with day(s) release leading to recognised NVQ qualifications.
Achieving professional Engineering Technician (EngTech Level 3) registration on completion of NVQ qualification.
Who are we looking for?
You must be on track to achieve or have achieved a minimum of 5 GCSEs, or equivalent, at Grade 4 or above including English and maths.
Candidates must have 3 years residency in the UK/EU. Candidates will be asked to provide their passport/residency/evidence of EU settled status and in some cases evidence they have been living in the UK/EU for the last 3 years.
We do not sponsor visas at the Apprentice level and therefore learners on a student visa are not eligible for this programme. Training Outcome:For apprentices who work hard and show commitment to their studies and the organisation, the option to progress on to level 4 Apprenticeship, HNC, HND or other career suitable training will be available. Employer Description:CBRE is the world’s leader in commercial real estate services. We advise property owners, investors and occupiers on every aspect of their property strategies and assist them in the development, buying, selling, financing, leasing, valuing and management of their assets. Globally we employ over 100,000 employees across 500 global offices. Global Workplace Solutions is one of CBRE’s biggest and fastest growing business units. We assist building occupiers throughout the life cycle of their buildings, from planning and acquisition, through design and construction, operation, adaptation and final disposal. GWS is redefining workplace because we believe every place of work can be a competitive advantage for our clients. Productivity, reliability, engagement, safety and brand – the workplace enables business results whether work happens in an office, retail, laboratory, manufacturing plant, data centre, public building or critical environment.Working Hours :Monday to Friday 9am to 5pmSkills: Communication skills,Problem solving skills,Logical,Team working....Read more...
Utilising workshop equipment including the lathe, mill, power tools, hand tools to machine, fabricate and assemble parts and sub-systems (mechanical and electrical)
Generate CNC machine code from CAD models for use on the milling machine
Read engineering drawings and utilize metrology equipment to perform part inspections
Provide support to prototype builds and vehicle installation, including creation and maintenance of build documentation
Coordinate with external venders to undertake routine maintenance activities for workshop tools and equipment
Undertake general administrative tasks to support Operations activities, such as reviewing and updating risk assessments and ensuring the workshop remains in good order
Support the set-up of new work areas by positioning parts, tools, and furniture correctly in the workshop before a build and putting these away once finished
Understand the strict safety requirements for high voltage working and be the second person that must be present when high voltage work is being undertaken
Support the creation and deployment of new operations processes
Identify tooling shortages or replacements and source the tools needed
Work with the technician and engineering team to ensure that right material is on site to produce parts
Alongside the core project work described above, which the Apprentice can make contributions to and learn from, there are numerous non-project tasks essential to the smooth operation of the workshop, including but not limited to:
Arranging workshop maintenance items with external parties.
New equipment:
Preparing for the arrival of new CapEx equipment (CNC lathe, waterjet cutter)
Produce instruction sheets and guides for technicians detailing how to use new equipment safely
Work with engineering to produce documentation on how to utilise and design to in-house capabilities
Work with technicians to recommend tooling acquisitions so that we can use new equipment to more efficiently and quickly meet or exceed project goals
Implementation of new processes in the operations team.
Marrying up drawings, material, tools and instructions to prep jobs for technicians
Provide updates and status to project management and wider team on the production of parts
Training:Engineering Technician Level 3 Apprenticeship Standard:
Practical Experience: Hands-on experience with manufacturing processes and machinery
Project Management: Gaining skills in managing engineering projects from conception to completion
Problem Solving: Developing the ability to troubleshoot and solve engineering problems
Quality Control: Understanding and applying quality assurance practices and standards
Team Collaboration: Working within a multidisciplinary engineering team
Health and Safety: Learning and adhering to safety protocols and regulations in the workplace
Professional Development: Enhancing communication, time management, and other professional skills essential for engineers
Training Outcome:
Possible progression to a full-time role
Employer Description:In the several years prior to the formation of Vantage Power, two young engineers – Alexander Schey and Toby Schulz – built the world’s longest range electric car, and set a record by driving the longest road in the world — the 26,000km Pan-American Highway.
Not content with stopping there, Alex and Toby teamed up again in 2011 to start Vantage Power. Over the following eight years the company grew from two to a highly experienced and skilled team of 25, with a laser focus on developing highly innovative electrification and connectivity technologies.
Along the way, a number of industry firsts were achieved using Vantage Power technology, including the world’s first fleet of retrofitted hybrid buses – which entered service in London in 2017 – and a unique 25t triple-axle hybrid bus.
In April 2019, Vantage Power was acquired by Allison Transmission – a global provider of commercial vehicle propulsion solutions. As a wholly owned subsidiary of Allison, Vantage Power is able to combine the strength and worldwide footprint of a major tier 1 supplier with the speed and agility of a high-tech growth company. Together we are united in our goals of delivering exceptional value to our customers and improving the way the world works.
Working Hours :Days to be confirmed between the hours of 8.00am - 5.00pmSkills: Communication skills,IT skills,Attention to detail,Organisation skills,Problem solving skills,Administrative skills,Team working,Initiative....Read more...
Working within the estimating team under the support and supervision of a dedicated mentor you will learn the tasks involved within the estimating process. This will include- measuring and doing take offs to producing quotations for external customers.
WHAT YOU WILL DO IN THE SHORT TERM
Initially you will spend time learning about the products and services we offer
When you are confident with the products we offer, you will be shown how to review drawings provided by customers. We will teach you how to read architects plans, engineer’s foundations and levels drawings, steel work details and other relevant technical drawings. You will also be shown how to identify relevant sections of building specifications
Once confident with reviewing drawings, you’ll be shown how to collate quotations, using our bespoke computer software, from here you will start to complete your own take offs under the guidance of a mentor
You will also attend college on day release to broaden your knowledge and skillset
WHAT YOU WILL DO IN THE LONGER TERM
As you become more experienced in the role, you will be responsible for producing and managing multiple estimates and take offs whilst also learning how to convert an enquiry to an order. This will involve customer liaison along with sales and negotiation. Whilst still supported you will have less reliance on your mentor
You will also be introduced to other areas of the department with involvement in design, planning and production to broaden your overall knowledge
Training:As part of your Apprenticeship, you will be enrolled onto a nationally recognised Construction Support Technician Level 3 standard via our training partner, Learning Skills Partnership. Your Apprenticeship typically takes 23 months to complete and is fully supported through a combination of regular online lessons, e-learning materials, and access to their team of experts for 1-2-1 advice and support.Training Outcome:
There are excellent opportunities for progression within the company, with a strong focus on continued learning and personal development
Employer Description:FP MCCANN is the UK's largest manufacturer and supplier of precast concrete solutions. In Northern Ireland, we also offer quarrying, ready mix, surfacing, dry soil ,prtar, construction and SP MCCANN homes. From our 12 UK based manufacturing facilities, FP McCann offers an extensive range of quality precast concrete solutions that include drainage and water management, tunnels and shafts, rail, power and infrastructure, walling, fencing, agricultural, flooring, filter bed systems, bespoke precast, tanks and chambers, dock leveller pit systems, box culverts, building products and architectural & structural products. At FP McCann, we can customise our solutions to ensure they create maximum value for your project, accommodating your site conditions, design requirements and construction needs. In Northern Ireland, FP McCann have an array of Quarries, Surfacing, Readymix and Precast plants, which supply a wide range of heavy building materials to the construction industry. We offer a range of sustainable and innovative product solutions that complement our standard package of products and services. FP McCann also operates within the Construction sector and has secured and completed a portfolio of award-winning construction work within Northern Ireland; these include projects in the public sector areas of health, education, water and transport infrastructure, and private industrial and commercial developments. At FP McCann, we have a long history of meeting our customers’ needs. Our product range has never been more diverse, more competitive, or more in-tune with our clients’ needs than it is today. The quality and reliability of FP McCann’s products and services are the foundation of our success. We are constantly developing and improving our solutions, whilst striving to exceed customer expectations. At FP McCann, we promise to perform and build a sustained trust with our stakeholders. By implementing our corporate values, we aim to deliver on this guarantee through our products, services, communications and, above all, the behaviour of our people. We recognise the importance of operating with integrity and apply high standards of corporate governance in the conduct of our business. Our ability to deliver to client specifications on major projects across the UK and Ireland has established FP McCann as a valuable and reliable partner. With twelve UK manufacturing facilities, FP McCann employs around 1,600 people, making us the largest precast concrete manufacturers in the United Kingdom.Working Hours :Days and shifts are to be confirmed.Skills: Communication skills,IT skills,Attention to detail,Organisation skills,Customer care skills,Problem solving skills,Administrative skills,Number skills,Analytical skills,Logical,Team working,Initiative....Read more...
In this apprenticeship you will learn a range of mechanical and electrical skills ranging from bearing fitting to troubleshooting and repairing flow wrappers, fault finding electrical circuits to installing motors.
You will also learn how to safely maintain the equipment to make and package our Ryvita and Dorset Cereals products which are made on the Poole site.
These skills, coupled with a working knowledge of the process operations will develop you into a strong, well-balanced mechanical and electrical engineer.
Focus will be to complete preventative maintenance on Bakery equipment and fault-finding and diagnosing equipment breakdowns arise so that operations can continue safely and efficiently so that all our products meet all quality standards and customer expectations.
In year 2, one apprentice will begin to diversify into Electrical, Controls and Instrumentation engineering (EC&I). The EC&I apprentice will develop skills to design, develop and manage PLC and software-based control systems and distributed controls systems on our site.
Our 4 Year Apprenticeship Programme will see you develop both technically and personally, with the majority of your first year spent at SETA training centre in Southampton completing some of the following training:
Foundational knowledge units including General Safety and Statutory Requirements
Specialist Electromechanical training including:
Mechanical Maintenance,
Electrical Maintenance,
Fluid Power
1 Day a week will be dedicated to the delivery of a BTEC Level 3 in Advanced Manufacturing Engineering
Once you’re equipped with your foundation knowledge, you’ll join our friendly team on-site for Year 2 and 3 where you’ll work alongside our teams and start gaining valuable hands-on experience and training to further your understanding and start applying what you’ve learnt. You’ll be assigned a mentor, who will oversee your development and training. There will also be further training courses in Year 2.
Through this apprenticeship you will:
Be involved in preventative maintenance schemes, breakdowns repairs, site services and improvement projects with the aim of ensuring the safe running of the factory.
Gain an understanding the key operational functions – milling, flour transportation, baking and packaging work within our factories.
Support the maintenance of production equipment.
Gain a good knowledge of our processes and equipment.
Develop skills to troubleshoot and fault find on plant equipment using tools and systems tools and techniques throughout equipment lifecycle: commissioning, operations and routine maintenance
Training:Our Apprentices will undertake a Maintenance and Operations Engineering Technician, Level 3 (A level). This will include a full-time period of practical workshop based ‘off-the-job’ training at SETA in Southampton.
You will also begin a technical certificate (depending on your prior attainments) where you will be required to attend SETA one day a week over two academic years. After your initial training at SETA, you will be working towards your End Point Assessment.Training Outcome:By the end of the apprentice programme, you’ll have developed your technical abilities within the business and become a qualified Shift Engineer or Electrical, Control and Instrumentation Engineer working within the engineering team. Further progression is available within the engineering team and cross-functionally into the operations or technical teams.Employer Description:Together we inspire better wellbeing by creating delicious foods from nature.
At Poole we are very proud of our manufacturing of our well recognised brands:
Jordans Muesli, Dorset Cereals and Ryvita
We are on the lookout for an Apprentice Engineer to join our friendly team at Jordan’s Dorset Ryvita. As part of the ABF group, we have ambitious plans for growth over the next 5 years and we need someone with the drive and passion to help us get there.
Together we inspire better wellbeing by creating a positive working environment that is rich in diversity, where we create equity in opportunities, where we can all be ourselves, and where we all feel that we belong.
Our brands are sold worldwide and have great credentials in environmental sustainability.Working Hours :Apprentices will work Mon- Fri 37hrs a week whilst at SETA. When in the workplace you will work 39hrs.
Year 1: typical pattern of work would be 5-days a week Mon-Fri
Years 2-4: shift rotations, weekends & night shifts will be introducedSkills: Communication skills,Attention to detail,Problem solving skills,Number skills,Logical,Team working,Initiative,Physical fitness,Adapting to change....Read more...
Head Of Service
Birmingham
£70,000 - £85,000 + Technical Training + Courses + Career Progression + Company Car (Personal Use) + Personal Development + Generous Holiday + Pension + Private Healthcare + Recognition
Are you ready to take your career to the next level in a dynamic, high-impact Head of Service role? This is a unique opportunity to lead a talented team, make a tangible difference, and drive your technical expertise forward. With access to comprehensive training, a clear path for progression and the chance to influence the growth of a leading company in the transport refrigeration and controlled temperature industry, this role offers everything you need to excel both personally and professionally.
This well-established company operates in various sectors including food, pharmaceuticals, and plants, delivering essential temperature-controlled solutions. As Head of Service, you’ll be at the forefront of this industry, managing the operations and technical delivery of services across multiple sites, while being supported in your own technical development.
The Role Of The Head of Service Will Include: *Leading and managing a team of engineers across 7 sites, ensuring high-quality service delivery. *Overseeing the smooth running of operations across the UK, with occasional overnight stays as required. * Driving continuous improvement to boost efficiency and customer satisfaction. * Taking ownership of key responsibilities and fostering a culture of accountability within your team.
The Successful Head of Service Will Have: * A background/understanding with mechanical and electrical engineering (essential). * Refrigeration experience (desirable). * A keen eye for detail and a proactive, solution-focused mindset. * Full driving license.
Please apply or contact for immediate consideration. Keywords: Head of engineering ,engineering manager,service manager,Head of service,head of engineers,project engineer,project manager,maintenance engineer, field service engineer, service engineer,field service manager, technical manager,site engineer, shift technician shift engineer, plant engineer, electrical engineer, mechanical engineer, multi-skilled engineer, multi-skilled engineer,transport engineer, transport refrigeration, refrigeration engineer, engineer, manufacturing engineer,medical engineer,industrial engineer, machinery engineer, hgv manager, HGV engineer,Transport manager, industrial, food, pharma, plant,Wolverhampton, Braintree, Wrexham,Kings lyn,Midlands,Birmingham,Coventry, Northampton,Corby,Leicester,Royal Leamington Spa, Stafford, Stoke On Trent,Worecester, Hereford,Gloucester,Cheltenham,Derby, Loughborough,Peterborough,Spalding,Oxford,Bedford
This vacancy is being advertised by Future Engineering Recruitment Ltd. The services of Future Engineering Recruitment Ltd are that of an Employment Agency.
Please visit our website to view other positions we are currently handling.
Future Engineering Recruitment Ltd can only accept applications from candidates who have a valid legal permit or right to work in the United Kingdom.
Potential candidates who do not have this right or permit, or are pending an application to obtain this right or permit should not apply as your details will not be processed.
We will endeavour to respond to all applicants however due to the sheer volume of response, we can only guarantee that candidates who have been shortlisted will be contacted.....Read more...
Field Service Engineer
Derby
£28,000 - £38,000 + Stability + Family Feel Environment + Bonus + On Job Training + Package + Immediate Start
Are you looking for a dynamic role with a stable company that values you for the long term? This company is a leader in manufacturing and are seeking a dedicated Field Service Engineer to join their vibrant team. You will play a key role in installing and servicing equipment, as well as conducting equipment surveys and will receive on the job training, value and support!
This company is a market leader that specialises in the production and supply of conveyor belts and related accessories. They provide a wide range of FMCG industries. By becoming a Field Service Engineer, this is your chance to become part of a stable company where you can enjoy job satisfaction. You will enjoy support from them while working with a friendly team, along with a great package.
This field service engineer role will include:
Installing and servicing conveyor and drive belts.
Inspecting and advising on the condition of equipment.
Conducting surveys with the sales department
Travel round the UK, stayaway included
The successful field service engineer will have:
Background as a field service engineer or similar
Mechanical experience is essential
Full UK driving license
Commutable to Derby and happy to travel around the UK
If you are interested in this role, please apply and call Ben Francis on 07537153940.
Key words: Field Service Engineer, Maintenance, Conveyor Belts, Technician, Fitter, Service, conveyor belts, mechanical, Derby, Nottingham, Leicester, Loughborough, Birmingham, Coventry, Stoke on Trent
This vacancy is being advertised by Future Engineering Recruitment Ltd. The services of Future Engineering Recruitment Ltd are that of an Employment Agency.
Future Engineering Recruitment Ltd can only accept applications from candidates who have a valid legal permit or right to work in the United Kingdom. Potential candidates who do not have this right or permit, or are pending an application to obtain this right or permit should not apply as your details will not be processed.
We will endeavour to respond to all applicants however due to the sheer volume of response, we can only guarantee that candidates who have been shortlisted will be contacted....Read more...
JOB DESCRIPTION
Tremco Construction Products Group brings together Tremco CPG Inc.'s Commercial Sealants & Waterproofing and Roofing & Building Maintenance divisions; Tremco Barrier Solutions Inc.; Dryvit, Nudura and Willseal brands; Prebuck LLC; Weatherproofing Technologies, Inc.; Weatherproofing Technologies Canada and PureAir Control Services, Inc. Altogether, Tremco CPG companies operate 21 manufacturing facilities, 6 distribution sites, and 3 R&D/technology sites, and employ more than 2,700 people across North America.
GENERAL PURPOSE OF THE JOB:
The Maintenance Technician is responsible for the inspection, troubleshooting, and repair of process and facility-related equipment. Equipment inspection includes preventative maintenance (PM) and associated documentation.
ESSENTIAL DUTIES AND RESPONSIBILITIES:
Comply with all safety policies (especially Cardinal Rules - e.g. Hot Work, LOTO, Confined Space), Partner with Maintenance Supervisor and Facilities Manager to support LEAN initiatives to eliminate unplanned production interruptions due to process equipment failure, Implement the needed preventative measures, including optimization of PM program, Ensure reliable operation of facility support processes and utilities (i.e. HVAC, Steam Boilers, Air Compressors, Tow motors, Cooling Towers, Hot Oil Heaters), Diagnose/Troubleshoot, repair/replace and maintain facility electrical systems (e.g. programmable logic controllers, human machine interfaces, lighting) and components (e.g. sensors, switches, valves), Diagnose/Troubleshoot, repair/replace and maintain facility mechanical systems (e.g. product vessels/reactors, pumps) and components (e.g. piping, manual valves), Investigate equipment/process failures and difficulties to diagnose faulty operation, Assist Maintenance Supervisor to arrange and coordinate contractor tasks (including equipment rental) to support facility and process maintenance/repairs, Serve, as needed, on process hazard analysis (PHA) teams/sessions
EDUCATION
High School Diploma required
EXPERIENCE
One-year certificate from college or technical school and 1-2 years' experience OR High School Diploma and 4 years' experience
OTHER SKILLS AND ABILITIES:
Deductive Reasoning - The ability to apply general rules to specific problems to produce answers that make sense. Problem Sensitivity - The ability to tell when something is wrong or likely to go wrong. It does not involve solving the problem, only recognizing there is a problem. People Interaction - Ability to work with diverse groups to reach consensus regarding problems, and needed changes. Mechanical - Knowledge of machines and tools, including their designs, uses, repair and maintenance. Electrical - Knowledge of circuits, programmable logic controllers (PLCs), sensors, switches, including their connectivity to mechanical systems, uses, repair and troubleshooting.
BENEFITS:
Tremco offers a variety of benefits to its employees, including but not limited to health insurance, paid holidays, paid time off, 401(k) with company match, Company Pension Plan, Performance Based Bonus/Commission, and continuing education.
All qualified applicants will receive consideration for employment without regard to their race, color, religion, sex, sexual orientation, gender identity, national origin, disability or veteran status.Apply for this ad Online!....Read more...
Tool Service & Maintenance: Service and maintain tools used in the manufacturing process
Tool Modification: Modify tools according to technical drawings and specifications
Machining Tasks: Perform machining tasks to meet production requirements
Collaboration with Tool Setters: Work closely with Tool Setters to understand and resolve any tooling issues
Training:Machining Technician Level 3.
During your apprenticeship, you will receive two types of training.
On-the-job training will be delivered by Schneider Electric, your employer. You’ll receive training and supervision to help you perform your role. This will include skills and knowledge that are outside of the apprenticeship but necessary for the job. In addition to ‘on-the-job’ training, they will support you in other ways to ensure your success. Types of support will include:
A comprehensive induction
Mentoring or regular one-to-one guidance
Social enrichment and networking opportunities
Performance reviews
Mental health and wellbeing support
Feedback opportunities
Off-the-job training will be provided by a carefully selected training provider during your normal working hours. You will spend at least 20% of your working hours (approximately 6 hours per week) completing ‘off-the-job’ training. This is protected time and a requirement for apprenticeship delivery. This training will teach you the knowledge, skills, and behaviours outlined in the apprenticeship standard, enabling you to achieve occupational competence.Training Outcome:After successful completion of your apprenticeship, you will potentially have the opportunity to move into a permanent position.Your learning doesn't stop there! Learn everyday, to stop learning is to stop growing. We are genuinely curious, never done with learning. With Schneider, there is no such thing as knowing it all or having all the answers. We beleive in life-long learning.
Every minute of the day brings a new chance to listen, open up our minds, and widen our horizons. We are never too experienced to learn.Employer Description:Schneider’s purpose is to create impact by empowering everyone to make the most of their energy and resources, bridging progress with sustainability. At Schneider, we call this Life Is On.
Our mission is to be the trusted partner in sustainability and efficiency. As a global leader in industrial technology, Schneider provides integrated solutions that help businesses grow, using digital tools to improve efficiency and create value for our customers.
With over 150,000 employees and more than a million partners in over 100 countries, we stay close to our customers and communities. Schneider embraces diversity and inclusion, guided by our purpose of building a sustainable future for all.Working Hours :Monday to Friday, working hours TBCSkills: Communication skills,Attention to detail,Customer care skills,Problem solving skills,Analytical skills,Team working,Initiative,Non judgemental....Read more...
Year 1- Training Centre- Hands on experience and training in engineering at Hereford and Worcestershire Group Training Association awarded 'Outstanding' by OFSTED.
Years 2, 3 and 4 - In Company - Experience the full range of AMADA engineering activities:
Refurbishment of pre-owned machines, Maintenance and Service, Machine Sales Consultancy and Software demonstrations to customers
4 days on the job training consist of:
Year 2 - Rotation around minimum of 3 Engineering departments to gain a basic understanding of engineering and to determine the apprentice’s skills. Duties will include but not limited to stripping down and refurbishing laser, press brake and punch machinery; developing time studies; assisting with training of customers on our machine software
Year 3 and 4 - Final placement to expand knowledge and develop portfolio work. Depending on skills and the business need this will either be the mechatronics or technical support pathway. Focus in both these pathways will involve more customer facing duties including site visitors with mentor engineers. We believe that “on the job “training is key to developing staff.
Our Apprentices are highly valued members of our team; making a genuine contribution to AMADA’s business success. We firmly believe in developing our talent of the future from within Amada
*****Fully funded education to HNC in Engineering*****Training:Formal training is delivered at HWGTA, HWGTA located in Worcester (WR4 9GN):
Years 1/2 is a combination of off the job training at HWGTA Training Centre as well as training on site with your employer. This includes 29-42 weeks within the training Centre plus 1 day per week in a classroom setting to cover practical and theory aspects and complete EAL Level 3 Diploma in Advanced Manufacturing Engineering - Development Knowledge
Years 3/4 based full-time in company developing skills in preparation for the end point assessment to gain your Mechatronics Maintenance Technician Level 3 qualification
You will receive monthly visits from your assigned Learning and Development Specialist, who will set you work, monitor your development and wellbeing, and discuss training sessions. They will also prepare you for your End Point Assessment
Additional training for functional skills in English and maths will be undertaken if needed
There is also a five-day teambuilding residential trip that is held in the spring of each year offered to all apprentices on programme
Training Outcome:Excellent prospects and progression including the possibilities of training and overseas travel.Employer Description:Amada Group is an international market leading manufacturer, providing a complete solution of machines, tools, software, service, parts and finance for our customers.
Amada UK, based in Kidderminster has in excess of 16 years experience of employing apprentices.Working Hours :Monday - Friday 08:30 - 17:00 including 1-hour unpaid lunchSkills: Communication skills,Attention to detail,Team working,Strong work ethic,Flexible attitude,Smart and professional,Enthusiasm & Self-motivated....Read more...
As a trainee accountant you will work as part of a team assisting with clients’ accounting needs.
This position involves a number of different aspects including:
Preparing financial statements for limited companies, partnerships and sole traders
Preparing tax computations
Providing bookkeeping services
Preparation of VAT returns
Filing Companies House and H M Revenue & Customs documents on client's behalf
Assignments will be undertaken both in the office and at client's premises. Trainees will have support and on the job training from managers and other senior staff.
During your training you will be expected to develop an understanding of the practical issues involved in delivering a high quality service to clients.
Both practical and theoretical training will be undertaken, with an aim to becoming a member of the Association of Accounting Technicians (AAT)Training:You will undertake the “Professional Accounting Technician” Apprenticeship (a HIgher Apprenticeship in Accounting), with full support from Accountancy Learning as part of their Flexible Apprenticeship Programme.
Assessment will be by an “End Point Assessment” and will be graded “Pass” or “Distinction”. This will include two elements:
A Professional Discussion. This will include a series of questions allowing you to to display the knowledge and experience you have obtained over your apprenticeship. You will build a Portfolio of reflections and product evidence that will be used for discussion points in the PD.
Alternatively a 2,000 word Written Statement can be submitted.A Synoptic Exam. This will include elements you have learnt throughout your studies of the individual AAT Units and this will contribute towards your end grade.
You will be prepared for both of these elements by undertaking studies for the AAT (Level 4) Professional Diploma in Accounting. These will underpin both elements of your “end point assessment”. As such, it is anticipated that your apprenticeship duration will be for 15-18 months although earlier completion is possible, provided the duration exceeds one year and a week.
You will receive support from both the employer, and the training provider, to complete and achieve your Apprenticeship and will be given time to study during the week on a day release basis. As you are working towards a professional qualification, it is also expected that you will continue your studies outside of normal office hours.
As you learn more in both the office and in your studies your responsibilities, and the variety of tasks you undertake, are expected to increase.Training Outcome:
Accountancy or taxation professional - Level 7
Employer Description:Bodmin based Chartered Accountants, Bennett Jones & Co are a well-established practice that offers a range of services to sole traders, partnerships and companies. Most of our clients are based in Cornwall. However, we have a growing amount of clients nationally due to our competitive fees and good reputation. Our clients come from a very wide range of business sectors from the more traditional farming and tourist based activities to manufacturing and information technology firms. We also complete a number of reviews for charities and grant funded bodies.Working Hours :Monday to Friday, excluding bank holidays.Skills: Communication skills,Attention to detail,Organisation skills,Problem solving skills,Administrative skills,Number skills,Analytical skills,Logical,Team working,Initiative,Patience....Read more...
Setting up digital print machinery
Checking print and image quality through nozzle and uniformity checks
Calibration of digital print machinery, e.g. print head voltages, registration and stitching, machine profiling
Understanding colour matching and colour ways with the help of the Op
Gain an in-depth understanding of Adobe Suite Program such as, Photoshop and Illustrator
Colour matching along matching alongside lead op and pre-press engineer
Diagnose and resolve colour management or printing problems / respond to any system issues including alerts / stops etc
Gaining an understanding of pre-press colour matching with the help of the pre-press engineer
Understanding spectrophotometry and ink densities. General machine maintenance
Operation of UV curing lamps
Ensure all consumables such as inks are replenished as and when required to ensure maximum uptime / output. Understanding digital inkjet systems mechanically and through software
Gaining an understanding of UV ink and coating viscosities and temperatures and how they impact colour and quality
General inspection of product, identifying any issues with the print that could be from the digital print machine
Understanding print faults
Gaining an understanding of the other processes involved in production zone and how all the processes come together to ensure a high-quality print output
Liaise with the team to help resolve/improve any print or colour issues
Role Objective:
Operate equipment to process raw materials into finished products while meeting safety, productivity, quality, cost, and service requirements
Aid and ensure all product are produced at the highest standard in terms of colour and consistency
Demonstrate ability and willingness to perform multiple job functions effectively
Perform manufacturing operations in accordance with SOP and work instructions
Actively support continuous improvement and Lean activities involved with the LS implementation
Operate machine control screens, material handling, and packing & shipping equipment
Perform quality checks and record results
Proactively respond to any quality deviation
Perform operator maintenance and assist with other maintenance activities
To become fully conversant with Adobe Suite programs such as, Illustrator and Photoshop, along with an in depth understanding of image creation, design and colour matching
To become an allrounder within the AST team, through pre-print, print, post print and coating operations
Process orders via computer/manual systems and respond to internal and/or external inquires in a professional manner
Training:
Upon successful completion of the apprenticeship the qualification achieved will be a Level 3 Print Technician
Throughout your time as an apprentice, you will be supported by both your employer and BPIF Training
You will be assigned a training coordinator to ensure that you have the best training available
Training requirements will be discussed at the point of employment to suit both your own and business needs
Training Outcome:
Upon successful completion the apprenticeship will lead to a full-time position
Employer Description:We're the UK's leading manufacturer of decorative surfacing products for residential kitchens, bathrooms, and bedrooms including laminated worktops, acrylic based solid surfacing products, and waterproof panels. Wilsonart markets its products to the commercial markets in the United Kingdom making more than 100,000 worktops each month we've been going since the early nineties, but our history goes much farther back.
We're proudly part of Wilsonart Engineered Surfaces, driven by a mission to create surfaces people love, with service they can count on, delivered by people who care.
Together we've enjoyed 60 years of innovation, design and production of beautiful surfaces with no intention of slowing down. Wilsonart Engineered Surfaces was grown from a little company called Ralph Wilson Plastics founded in Temple, Texas, USA in 1956. The rest, as they say, is history.Working Hours :Monday - Friday, 08:00 - 16:30Skills: Communication skills,Initiative,Team working....Read more...
Siemens Healthineers is one of the world’s largest suppliers to the healthcare industry and a trendsetter in medical imaging, laboratory diagnostics and medical information technology. We have an exciting opportunity for enthusiastic and aspiring individuals to join our Field Service Engineer Apprenticeship based in the North West area of England, beginning in August 2024.
This engineering apprenticeship will involve dedicated training on your journey to becoming a skilled Field Service Engineer in the healthcare industry and offers a favourable apprenticeship salary and benefits.
In this Field Service Engineer Apprenticeship role, you will join our field-based engineering team of approximately 200 engineers and be ultimately responsible for installing, repairing, and maintaining our medical systems. You will provide vital technical service support to our customers and work at hospital sites throughout the UK, initially focusing on customer sites within the North West and surrounding area.
Duties include but are not limited to:
Develop an understanding of relevant industry health and safety standards, regulations, and environmental and regulatory requirements
Maintenance and operational practices, processes and procedures cover a range of plant and equipment
Locate, and rectify faults in plant and equipment
Communicate with and provide information to stakeholders in line with personal roles and responsibilities
Read, understand and interpret information and work in compliance with technical specifications and supporting documentation
Inspect and maintain appropriate plant and equipment to meet operational requirements
Assess and test the performance and condition of plant and equipment
Communicate, handover and confirm that the appropriate engineering process has been completed to specification
Position, assemble, install and dismantle electrical plant and equipment, which may include motors, switchgear, cables and conductors, to agreed specifications
Diagnose and determine the cause of faults in electrical plant and equipment
Replace, repair or remove components in the electrical plant and equipment and ensure its return to operational condition
You can also expect the following:
Travel to sites across the North West of England
Attend other Siemens manufacturing sites across the country on temporary short-term assignments
Visit the Siemens Healthineers Customer Care Centre in Camberley, Surrey
Travel abroad to the Siemens Training Centres in Germany and the US as required
If the idea of this apprenticeship appeals to you and you are looking to earn while you learn with a Top 100 UK Apprenticeship employer, please apply today!Training:Level 3 Maintenance and Operations Engineering Technician Apprenticeship Standard:
To include:
Practical Skills Training to be delivered at Macclesfield College
BTEC Level 3 Diploma to be studied at college on a day-release basis over the first 2 years of the programme
Portfolio of competence-based evidence to meet the Knowledge, Skills and Behaviours criteria as outlined in the Standard
End Point Assessment
Level 2 Functional Skills in maths and English (if required)
Training Outcome:
You will also eventually work towards a Level 4 HNC in Engineering
Upon completion of the apprenticeship, you will have the opportunity to apply for a full-time position at Siemens Healthineers as a Customer Service Engineer with the opportunity of further education and product training
Employer Description:Our technology empowers customers to transform the industries that form the backbone of economies: industry, transportation, buildings and grids. Our solutions accelerate the digital transformation of multiple industries, to scale sustainability impact.Working Hours :Monday - Friday (Exact shifts to be confirmed).
Total hours per week: 36.25Skills: Communication skills,IT skills,Attention to detail,Organisation skills,Customer care skills,Problem solving skills,Number skills,Analytical skills,Logical,Team working,Initiative,Patience....Read more...
Siemens Healthineers is one of the world’s largest suppliers to the healthcare industry and a trendsetter in medical imaging, laboratory diagnostics and medical information technology. We have an exciting opportunity for enthusiastic and aspiring individuals to join our Field Service Engineer Apprenticeship based in the North West area of England, beginning in August 2024.
This engineering apprenticeship will involve dedicated training on your journey to becoming a skilled Field Service Engineer in the healthcare industry and offers a favourable apprenticeship salary and benefits.
In this Field Service Engineer Apprenticeship role, you will join our field-based engineering team of approximately 200 engineers and be ultimately responsible for installing, repairing, and maintaining our medical systems. You will provide vital technical service support to our customers and work at hospital sites throughout the UK, initially focusing on customer sites within the North West and surrounding area.
Duties include but are not limited to:
Develop an understanding of relevant industry health and safety standards, regulations, and environmental and regulatory requirements
Maintenance and operational practices, processes and procedures cover a range of plant and equipment
Locate, and rectify faults in plant and equipment
Communicate with and provide information to stakeholders in line with personal roles and responsibilities
Read, understand and interpret information and work in compliance with technical specifications and supporting documentation
Inspect and maintain appropriate plant and equipment to meet operational requirements
Assess and test the performance and condition of plant and equipment
Communicate, handover and confirm that the appropriate engineering process has been completed to specification
Position, assemble, install and dismantle electrical plant and equipment, which may include motors, switchgear, cables and conductors, to agreed specifications
Diagnose and determine the cause of faults in electrical plant and equipment
Replace, repair or remove components in the electrical plant and equipment and ensure its return to operational condition
You can also expect the following:
Travel to sites across the North West of England
Attend other Siemens manufacturing sites across the country on temporary short-term assignments
Visit the Siemens Healthineers Customer Care Centre in Camberley, Surrey
Travel abroad to the Siemens Training Centres in Germany and the US as required
If the idea of this apprenticeship appeals to you and you are looking to earn while you learn with a Top 100 UK Apprenticeship employer, please apply today!Training:Level 3 Maintenance and Operations Engineering Technician Apprenticeship Standard
To include:
Practical Skills Training to be delivered at New City College Rainham campus
BTEC Level 3 Diploma to be studied at College on a day-release basis over the first 2 years of the programme
Portfolio of competence based evidence to meet the Knowledge, Skills and Behaviours criteria as outlined in the Standard
End Point Assessment
Level 2 Functional Skills in maths and English (if required)
Training Outcome:
You will also eventually work towards a Level 4 HNC in Engineering
Upon completion of the Apprenticeship, you will have the opportunity to apply for a full-time position at Siemens Healthineers as a Customer Service Engineer with the opportunity of further education and product training
Employer Description:Our technology empowers customers to transform the industries that form the backbone of economies: industry, transportation, buildings and grids. Our solutions accelerate the digital transformation of multiple industries, to scale sustainability impact.Working Hours :Monday - Friday (exact shifts to be confirmed).
Total hours per week: 36.25.Skills: Communication skills,IT skills,Attention to detail,Organisation skills,Customer care skills,Problem solving skills,Number skills,Analytical skills,Logical,Team working,Initiative,Patience....Read more...
Our 3 Year Apprenticeship Programme will see you develop both technically and personally, with the majority of your first year spent at SETA training centre in Southampton completing some of the following training: • Foundational knowledge units including General Safety and Statutory Requirements • Specialist Mechanical training including: o Bench Fitting o General Fabrication and Welding o Fluid Power
1 Day a week will be dedicated to the delivery of a BTEC Level 3 in Advanced Manufacturing Engineering Once you’re equipped with your foundation knowledge, you’ll join us on-site for Year 2 and 3 where you’ll work alongside our teams and start gaining valuable hands-on experience and training to further your understanding and start applying what you’ve learnt. You’ll be assigned a mentor, who will oversee your development and training, offering valuable insights into career paths at Perenco.
Some of your activities on-site might look like the below:
Plan and execute scheduled preventive and breakdown maintenance activities on the following:
Rotating Equipment, including pumps, gas turbines, centrifugal compressors, gearbox and their associated sealing and lube oil systems
Hydraulic and pneumatic systems.
Piping systems, including PSVs, valves, filters and associated equipment
Carry out all activities to company standards and procedures
Raise relevant permits within the agreed time period
Report relevant maintenance data for reliability analysis
Participate in failure investigations and identify reliability issues
Generate new work requests to highlight plant and equipment faults
Training:Our Apprentices will undertake a Maintenance and Operations Engineering Technician, Level 3 (A level). This will include a full-time period of practical workshop based ‘off-the-job’ training at SETA in Southampton.
You will also begin a technical certificate (depending on your prior attainments) where you will be required to attend SETA one day a week over two academic years. After your initial training at SETA, you will be working towards your End Point Assessment.
Training Outcome:By the end of the apprentice programme, you’ll have developed your technical abilities as a qualified engineer, built your networks, and be on your way with further study with a varied career path ahead of you. We believe training Apprentices is investing in the future of our business and we hope our Apprentices will want to stay with us and build a successful career. We’re a wide business with both Onshore and Offshore assets across the UK and encourage our people to explore all opportunities, so be bold and join us today!Employer Description:Perenco is a leading international independent hydrocarbon producer with operations globally across 15 countries. At Perenco we believe in sustainability. We recycle, we modernise and we redevelop in both mature and marginal oil and gas production, this means making the most of what already exists. We take on projects that others have left behind, doing better and producing longer. That was the vision of our founder Hubert Perrodo.
Production is key and we believe the Oil and Gas industry plays a pivotal role in reaching Net Zero targets and energy transition. Perenco have committed to a climate strategy which focuses on decarbonising our production process, developing our sustainability offering and contributing to local energy transition in the countries where we operate.
We offer apprenticeship across 3 of our onshore sites:
Wytch Farm, Dorset.
Bacton, Norfolk.
Dimlington, Humberside.
Wytch Farm is Europe's largest known onshore oilfield and is situated in one of the most environmentally sensitive areas of the UK. It's operations are on the southern shores of Poole Harbour, Furzey Island, Wareham and at Kimmeridge Bay. Wytch Farm also has a significant processing facility in Wareham currently producing 13,000 boepd.Working Hours :Initially apprentices will work Monday- Friday 37.5 hours a week.
Once competent & allocated to a team they will move to shift working 4 days a week on alternating patterns, Monday–Thursday: 6:45am- 5:15pm Followed by: Tuesday–Friday: 6:45am–5:15pmSkills: Communication skills,IT skills,Attention to detail,Organisation skills,Problem solving skills,Number skills,Team working,Initiative,Drive and determination....Read more...
Our 3 Year Apprenticeship Programme will see you develop both technically and personally, with the majority of your first year spent at SETA training centre in Southampton completing some of the following training:
Foundational knowledge units including General Safety and Statutory Requirements
Specialist Electrical training including:
o Electrical Wiring & Maintenance
o Programmable Logic Control
o Electronics Assembly
1 Day a week will be dedicated to the delivery of a BTEC Level 3 in Advanced Manufacturing Engineering
Once you’re equipped with your foundation knowledge, you’ll join us on-site for Year 2 and 3 where you’ll work alongside our teams and start gaining valuable hands-on experience and training to further your understanding and start applying what you’ve learnt. You’ll be assigned a mentor, who will oversee your development and training, offering valuable insights into career paths at Perenco.
Some of your activities on-site might look like the below:
Plan and execute scheduled preventive and breakdown maintenance activities to minimise impact on production, and maximise plant availability on the following:
o Variable speed controllers; LV/HV motors; LV/HV protection; LV/HV distribution systems
o UPS systems; lighting & small power; domestic systems; trace heating & cathodic protection
o Perform LV & HV Electrical Isolations and lock-offs.
Carry out all activities to company standards and procedures
Raise relevant permits within the agreed time period
Report relevant permits with the agreed time period
Develop and review operational and maintenance procedures
Provide input and assistance for new projects including commissioning work
Training:Our Apprentices will undertake a Maintenance and Operations Engineering Technician, Level 3 (A level). This will include a full-time period of practical workshop based ‘off-the-job’ training at SETA in Southampton.
You will also begin a technical certificate (depending on your prior attainments) where you will be required to attend SETA one day a week over two academic years. After your initial training at SETA, you will be working towards your End Point Assessment.Training Outcome:By the end of the apprentice programme, you’ll have developed your technical abilities as a qualified engineer, built your networks, and be on your way with further study with a varied career path ahead of you. We believe training Apprentices is investing in the future of our business and we hope our Apprentices will want to stay with us and build a successful career. We’re a wide business with both Onshore and Offshore assets across the UK and encourage our people to explore all opportunities, so be bold and join us today!Employer Description:Perenco is a leading international independent hydrocarbon producer with operations globally across 15 countries. At Perenco we believe in sustainability. We recycle, we modernise and we redevelop in both mature and marginal oil and gas production, this means making the most of what already exists. We take on projects that others have left behind, doing better and producing longer. That was the vision of our founder Hubert Perrodo.
Production is key and we believe the Oil and Gas industry plays a pivotal role in reaching Net Zero targets and energy transition. Perenco have committed to a climate strategy which focuses on decarbonising our production process, developing our sustainability offering and contributing to local energy transition in the countries where we operate.
We offer apprenticeship across 3 of our onshore sites:
Wytch Farm, Dorset.
Bacton, Norfolk.
Dimlington, Humberside.
Wytch Farm is Europe's largest known onshore oilfield and is situated in one of the most environmentally sensitive areas of the UK. It's operations are on the southern shores of Poole Harbour, Furzey Island, Wareham and at Kimmeridge Bay. Wytch Farm also has a significant processing facility in Wareham currently producing 13,000 boepd.Working Hours :Initially apprentices will work Monday - Friday, 37.5 hours a week.
Once competent & allocated to a team they will move to shift working 4 days a week on alternating patterns. Monday -Thursday, 6:45am - 5:15pm. Followed by: Tuesday - Friday, 6:45am - 5:15pm.Skills: Communication skills,IT skills,Attention to detail,Organisation skills,Problem solving skills,Number skills,Team working,Initiative,Drive & Determination....Read more...
Our 3 Year Apprenticeship Programme will see you develop both technically and personally, with the majority of your first year spent at SETA training centre in Southampton completing some of the following training:
Foundational knowledge units including General Safety and Statutory Requirements
Specialist Electrical & Instrumentation training including:
Electrical Wiring & Maintenance
Programmable Logic Control
Instrumentation & Controls
1 Day a week will be dedicated to the delivery of a BTEC Level 3 in Advanced Manufacturing Engineering
Once you’re equipped with your foundation knowledge, you’ll join us on-site for Year 2 and 3 where you’ll work alongside our teams and start gaining valuable hands-on experience and training to further your understanding and start applying what you’ve learnt. You’ll be assigned a mentor, who will oversee your development and training, offering valuable insights into career paths at Perenco.Some of your activities on-site might look like the below:
Maintenance to be completed using the company standards and procedures.
Complete scheduled and breakdown maintenance activities on the following:
Safety Systems, Fire & Gas Systems, Flow Measurement Systems
Pressure, Temperature and Level Control
Gas Detection
DCS Systems
Hydraulic and Pneumatic Control Systems
Develop and review operational and maintenance procedures
Completion of Maximo work orders and ensure generation of new work requests to highlight plant and equipment failure
Raise relevant permits within the agreed time period to ensure that maintenance is completed in an efficient manner
Provide assistance for projects, working with vendors and sub contractors as required
Comply with the requirements of Change Management policies eg, Plant Modifications Proposals
Training:
Our Apprentices will undertake a Maintenance and Operations Engineering Technician, Level 3 (A level)
This will include a full-time period of practical workshop based ‘off-the-job’ training at SETA in Southampton
You will also begin a technical certificate (depending on your prior attainments) where you will be required to attend SETA one day a week over two academic years. After your initial training at SETA, you will be working towards your End Point Assessment.Training Outcome:
By the end of the apprentice programme, you’ll have developed your technical abilities as a qualified engineer, built your networks, and be on your way with further study with a varied career path ahead of you. We believe training Apprentices is investing in the future of our business and we hope our Apprentices will want to stay with us and build a successful career
We’re a wide business with both Onshore and Offshore assets across the UK and encourage our people to explore all opportunities, so be bold and join us today
Employer Description:Perenco is a leading international independent hydrocarbon producer with operations globally across 15 countries. At Perenco we believe in sustainability. We recycle, we modernise and we redevelop in both mature and marginal oil and gas production, this means making the most of what already exists. We take on projects that others have left behind, doing better and producing longer. That was the vision of our founder Hubert Perrodo.
Production is key and we believe the Oil and Gas industry plays a pivotal role in reaching Net Zero targets and energy transition. Perenco have committed to a climate strategy which focuses on decarbonising our production process, developing our sustainability offering and contributing to local energy transition in the countries where we operate.
We offer apprenticeship across 3 of our onshore sites:
Wytch Farm, Dorset.
Bacton, Norfolk.
Dimlington, Humberside.
Wytch Farm is Europe's largest known onshore oilfield and is situated in one of the most environmentally sensitive areas of the UK. It's operations are on the southern shores of Poole Harbour, Furzey Island, Wareham and at Kimmeridge Bay. Wytch Farm also has a significant processing facility in Wareham currently producing 13,000 boepd.Working Hours :Once competent & allocated to a team they will move to shift working 4 days a week on alternating patterns, Monday–Thursday: 6:45am- 5:15pm Followed by: Tuesday–Friday: 6:45am–5:15pmSkills: Communication skills,IT skills,Attention to detail,Organisation skills,Problem solving skills,Number skills,Team working,Initiative,Drive and determination....Read more...
Bott Ltd have sites in Cornwall, Leicestershire and Scotland and employ over 400 people in the UK.
We invest in advanced machinery (Salvangnini, Amada) and seek out opportunities to reduce our carbon footprint, whilst our streamlined production flow allows us to deliver on-time.
We are proud to be a family business and work as a team, so all our employees feel a sense of inclusion, support and belonging. There is a great team in Bude and the Apprentices are made to feel welcome and supported through their learning journey with us.
We are looking for several Level 3 Engineering Apprentices based in Bude. This is a learning role leading to becoming a skilled engineer (CNC,Machining/Fabrication/Welding/Design) after completion of formal and practical training both at college and at bott.
We are looking for Apprentices that will be committed to the job and have a passion for engineering. You will need to have a positive and enthusiastic attitude and a willingness to learn. We have a number of qualified apprentices within our current team who have progressed through the business and hold roles such as Supervisor, Design Technician, Engineering Manager, etc. so joining bott as an Apprentice is also the start of a rewarding career with the company.
The main duties of the role will be:
Observing, learning and understanding a wide range of engineering skills and processes while under the instruction of skilled technical staff.
To be able to demonstrate these skills and processes as the training period progresses by working independently or with a team, to undertake tasks as instructed and increasing overall contribution to the department.
To undertake and successfully complete suitable courses throughout the training period, achieving the academic grades and practical skills in order to progress successfully with a potential to go on to complete a Level 4 or or degree level apprenticeship.
Learning and understanding the importance of Health and safety within the workplace.
To develop the skills to construct or modify products from verbal instructions and drawings.
To learn how to maintain workshop equipment and to keep it in good repair.
To maintain a logbook over the duration of the apprenticeship period, recording projects that have been undertaken and the skills learned.
You will be a team player and have the ability to work using your own initiative. A positive outlook and ‘can do’ approach to tasks is essential.
Benefits of working for Bott Ltd:
Basic hours
Day Shift: Mon to Thurs 08.00 to 16.30. Fri 08.00 to 15.30Evening Shift: Mon to Thurs 16:00 to 00:00. Fri 15:30 to 23:0030 minutes unpaid lunch break each day
Contributory Pension Scheme
34 days annual leave (includes 8 days statutory bank holidays)
Profit Share Scheme (after qualifying period)
Life Assurance Scheme (after qualifying period)
Pension Scheme (if applicable)
Employee Assistance Programme
Free car parking
Investment in our employees through learning and development
Flexible and family friendly policies
Training:
The Apprentice will be based onsite at our manufacturing facility in Bude however there will be day release when the Apprentice will attend Petroc College, Barnstaple.
Training Outcome:At Bott Ltd, we have many qualified apprentices who have now taken on Team Leader, Supervisory, Managerial roles or have taken their career into R&D or Design roles. Being a large employer, there are opportunities for progression.Employer Description:At bott, we manufacture high quality workspace solutions. Bott Ltd is a market leader in our workspace ad vehicle conversions and we take great pride in the products we manufacture and the service offered to customers. We have sites in Cornwall, Leicestershire and Scotland and employ over 450 people in the UK. We are proud to be part of a Group company but have the 'family business ethos' very much alive & work as a team, so all our employees feel a sense of inclusion, support and belonging.Working Hours :Monday to Thursday 8am to 4.30pm / Friday 8am to 3.30pm - Day Shift
Monday to Thursday 4pm to 12am / Friday 3.30pm to 11pm - Late ShiftSkills: Communication skills,IT skills,Attention to detail,Organisation skills,Problem solving skills,Number skills,Analytical skills,Logical,Team working,Initiative,Non judgemental,Patience,Physical fitness....Read more...
