Electronic Production Technician to work on low volume, high value Electronic Systems manufacturing principally with hand tools including micro soldering, test, fault finding and repair of electrical and electronic systems and components.
You will integrate and test electrical and electromechanical tools and take responsibility for the test equipment used to test tools.
Experience and skills required
Electronic lab equipment including: Multi-meter, Oscilloscope, Low Voltage Power Supplies, High Voltage Power Supply, measurement, test and debugging of electromechanical assemblies.
Electrical or Electronic engineering qualification (e.g ONC, HNC, HND, NVQ Level 2)
Proven ability to work successfully within design constraints.
Electronic tools and general test equipment competence.
Producing deliverable items from full drawing packs to relevant IPC standards.
Role responsibilities
Good electronic technician skills: testing, low and high voltage experience, basic soldering, crimping, and assembly.
Fault finding and rectification at system and component level.....Read more...
This Electrical Maintenance Engineer vacancy is working with a market-leading manufacturing group at a world class facility based near the area of Sutton Coldfield.This role offers fantastic industry leading company benefits such as extensive accredited OEM training and personal development opportunities, with a development route through to further career opportunities, and pension match of up to 10%, premium overtime is available. What’s in it for you as Electrical Maintenance Engineer:
Salary circa £52.5K+, plus bonus, plus premium overtime, OTE £60K+
In addition, you have a matched pension of up to 10%, share options, overtime at a premium, as well as an extensive benefits program
Hours of work – Days and Nights, 6am to 6pm, 6pm to 6am, 4 on, 4 off shift pattern
OEM Training and career development, including health and safety training, management training (ILM) & IOSH, cross-skilling and upskilling
The ability to work within a skilled team of engineers permanently
Experience and Qualifications Required for Electrical Maintenance Engineer:
Apprenticeship in Electrical or Mechanical Maintenance - City & Guilds, ONC, BTEC Level 3, NVQ Level 3
Previous experience as a Maintenance Engineer, Maintenance Technician, Engineering Technician, Engineer etc
Previous experience of undertaking reactive maintenance and following PPM schedules within a manufacturing environment
The company is a market leader, and international manufacturer, with an impressive background of investing in and developing employees at all levels of their business, providing extensive training and career progression opportunities. Please apply now!....Read more...
An Electronic Manufacturing company is looking for a Test Technician to join their growing team. They are a growing company with production facility in the UK and global customer base. They supply products into wide range of vertical markets.
Candidate requirements
Knowledge and Experience in PCB and electronics assembly.
Experience in Testing of PCB operations and assembly.
Experience in documentation of the test procedures and results.
Ability to find component level faults and test them.
....Read more...
An Electronic Manufacturing company is looking for a Test Technician to join their growing team. They are a growing company with production facility in the UK and global customer base. They supply products into wide range of vertical markets.
Candidate requirements
Knowledge and Experience in PCB and electronics assembly.
Experience in Testing of PCB operations and assembly.
Experience in documentation of the test procedures and results.
Ability to find component level faults and test them.
....Read more...
Prepare machines for builds, carry out calibrations and conduct routine maintenance, resolve machine build issues, and support the engineering team to recover build failures to minimise scrap
Ensure machine parameters meet part production specifications prior to manufacturing
Operate and monitor machines performance during the manufacturing process to ensure key parameters are maintained
Identify and troubleshoot any technical issues that may arise during the printing process and inform the AM Supervisor
Conduct regular quality checks on the printed parts to ensure surface quality and dimensional accuracy before dispatch to the next operation
Follow established quality control procedures to ensure the manufactured parts meet specifications and quality standards
Document and report any deviations or non-conformities in the manufacturing process or finished products
Evaluate the assigned schedule and where potential delays are foreseen, ensure timely communication to shift lead(s), supporting alternative plans that minimise the effect on delivery
Collaborate with the maintenance team or equipment suppliers for complex repairs or maintenance tasks
Working to standard operating procedures whilst maintaining cleanliness and housekeeping standards within the workplace
Adhere to all company safety policies and procedures, ensuring a safe working environment for oneself and colleagues
Support and encourage team working across the shift and shift patterns
Work efficiently within manufacturing as part of an established team
Actively participate in continuous improvement initiatives to enhance productivity, quality, and operational efficiency
Providing feedback and suggestions for process improvements to the AM Supervisor and engineering team
Training:
Engineering Operative Level 2
Carrying out a range of engineering operations
City of Bristol College (Advanced Engineering Centre)
Day Release
Training Outcome:
Full time employment- route to become an Additive Manufacturing Technician
Employer Description:DEEP Manufacturing is concerned with large-scale metal component
production using additive manufacturing and 3D printing techniques.
We use cutting edge technologies in this process and aim to serve
industries such as maritime, subsea, aerospace and energy where
large, complex components are needed and where speed, scalability
and certification are critical.Working Hours :Monday- Friday
9am- 5pmSkills: Communication skills,Attention to detail,Organisation skills,Team working,Initiative....Read more...
Support incoming inspection of components and raw materials for conformance to specifications.
Document quality control activities and inspection results accurately.
Help investigate and resolve quality issues, non-conformances, and customer complaints.
Participate in root cause analysis and continuous improvement activities (5 Whys, Fishbone, etc.).
Assist in maintaining and updating quality documentation, including inspection procedures and work instructions.
Learn and apply IPC-A-610 and other relevant quality standards in PCBA manufacturing.
Collaborate with production, engineering, and supply chain teams to ensure quality requirements are met.
Support with Diagnosing faults, to return parts to the customer specification.
Assist in the inspection and testing of PCBA products.
Support with onsite audits.
Training:Training will be provided with Hartlepool College of Further Education and will be on a day-release basis.Training Outcome:
Quality Technician
Quality Engineer
Employer Description:The Cicor Group is a globally active provider of full-cycle electronic solutions from research and development to manufacturing and supply chain management. Cicor has approximately 4,300 employees in 12 countries who are serving leaders from the medical, industrial and aerospace & defence industries. Cicor creates value to its customers through the combination of customer-specific development solutions, high-tech components, as well as electronic device manufacturing.
The Hartlepool Site, which employs 130 staff, provides technology-focused manufacturing including PCB assembly, box build, test and the integration of design-led connectivity and power solutions.Working Hours :Monday to Thursday, 8.00am to 4.30pm.
Friday, 8.00am to 2.30pm.Skills: Communication skills,IT skills,Attention to detail,Organisation skills,Problem solving skills,Analytical skills,Logical,Team working,Initiative....Read more...
Electronic PCB Production Technician required to work on the assembly, testing and calibration of small batches of electronic devices used on cars and autonomous electric vehicles. This will include fault diagnosis and hardware repair.
You will have recent experience of electronics manufacturing or PCB, instrumentation or similar product servicing.
Key skills
Electronics and circuit design knowledge.
Soldering, surface mount and through hole.
Fault find to component level.
Test and measurement equipment.
Ideally qualified to ONC/HNC level preferably in Electronics
Full driving license is essential for this role!....Read more...
Electronic PCB Production Technician required to work on the assembly, testing and calibration of small batches of electronic devices used on cars and autonomous electric vehicles. This will include fault diagnosis and hardware repair.
You will have recent experience of electronics manufacturing or PCB, instrumentation or similar product servicing.
Key skills
Electronics and circuit design knowledge.
Soldering, surface mount and through hole.
Fault find to component level.
Test and measurement equipment.
Ideally qualified to ONC/HNC level preferably in Electronics
Full driving license is essential for this role!....Read more...
We’re on the lookout for a skilled Production Maintenance Technician to join a well-established manufacturing business near Colwyn Bay. In this hands-on role, you’ll keep vital production equipment and tooling in top condition carrying out mechanical repairs, preventative maintenance, and improvements that keep operations running smoothly and efficiently. In the Production Maintenance Technician role, you will be:
Carry out preventative and reactive maintenance on production machinery and fixtures.Diagnose and repair mechanical faults, replacing worn parts as needed.Operate workshop equipment including lathes, milling machines, and drills.Support root cause analysis and improvement projects.Maintain tools, spares, and consumables for efficient workshop operation.Work safely and support continuous improvement initiatives.
To be considered for the Production Maintenance Technician role, you will need:
Proven mechanical maintenance experience in a manufacturing setting.Skilled in fitting, machining, and fault finding.Confident reading mechanical drawings and working to tight tolerances.Self-motivated, safety-focused, and able to work independently on PM shift.Experienced with fixtures, tooling, and lifting equipment.Strong team player with clear communication skills across production and engineering.Proactive and organised, able to work independently on the PM shift.Committed to high standards of safety, quality, and workmanship.
This is a temporary role with the potential to become permanent for the right candidate upon successful completion of the training period. The position operates on the PM shift (Monday to Thursday 14:00–22:00 & Friday’s 13:30 – 21:00).Please note that during the initial training and probation period, working hours may vary slightly to support learning and development. The starting rate of pay is £15.60 per hour plus holiday pay, with an enhanced rate payable after successfully completing the 3-month training/probation period.....Read more...
An exciting opportunity has become available for a highly skilled mechanical technician to join one of the world’s leading chemical manufacturers—a global leader and producer of specialised products, with facilities around the globe. This is your chance to bring your expertise to a company that is driving innovation across the chemical industry.Salary and Benefits for the Mechanical Technician:
Annual Salary: £43,547.27 - £44,986.56
33 Days of Annual Leave (Including Bank Holidays)
Discretionary Annual Bonus
Life Assurance Policy
Private Medical Insurance
Income Protection Scheme
Up to 9% Employer Pension Contribution
Mechanical Technician Role Overview:As a mechanical technician , you will be central to the installation, maintenance, and fault diagnosis of mechanical equipment across all plant operations. Your work will involve both proactive and reactive maintenance, alongside continuous improvement tasks that support optimal performance and safety.Key Responsibilities:
Complete hands-on inspection, troubleshooting, and maintenance of mechanical systems throughout the facility.
Lead mechanical overhauls, installations, and commissioning activities, acting as the go-to mechanical technician for quality control and technical insight.
Mentor junior technicians and apprentices by sharing advanced knowledge in the mechanical field.
Ensure strict compliance with health and safety protocols and engineering standards using site-specific processes and documentation.
Maintain accurate records and documentation via SAP and other systems.
Step in to support or deputise for coordinators, providing critical cover for out-of-hours maintenance and SHE-critical situations.
Mechanical Technician Requirements:
Time-served or apprentice-trained with NVQ Level 3 or equivalent in Engineering.
At least five years of hands-on experience as a mechanical technician , ideally within chemical, pharmaceutical, or food manufacturing.
Strong mechanical background with a good understanding of electrical systems.
How to Apply:Ready to take your career to the next level? Submit your CV today to be considered for this mechanical technician role!....Read more...
Operate and maintain CNC milling, turning, and laser cutting machines to produce precision components according to project specifications
Assist in custom prototyping and 3D printing processes, ensuring quality and accuracy across a variety of materials
Support the hands-on training of apprentices by demonstrating modern engineering techniques and fostering skill development in a collaborative workshop environment
Training:
Machining Technician Level 3 Apprenticeship Standard
Day release during term time
Regular visits from your apprenticeship skills coach in the workplace
Training Outcome:On successful completion of the apprenticeship, opportunities exist to move into specialist roles such as:
CNC machinist (milling/turning)
Laser technician (cutting/marking)
CAD/CAM programmer
Product development & prototyping technician
General workshop engineer
Employer Description:Join a fast-growing precision engineering company working with cutting-edge CNC machines, lasers and 3D printers. You’ll gain hands-on experience across machining, fabrication and assembly, learning real skills that shape parts for industries from design to advanced manufacturing.Working Hours :Monday - Friday, 8.30am - 5.00pmSkills: Communication skills,Attention to detail,Problem solving skills,Number skills,Analytical skills,Logical,Team working....Read more...
Mechanical Assembly Technician
Slough
£30,000 - £40,000 Basic + Great Working Environment + Stability + Holidays + Pension
Work a mechanical assembly technician role with a company focused on being a great place to work! You'll be working on bespoke automotive and aerospace products and be appreciated for your work whilst working within a good team of people. The company is a small but specialist manufacturer of parts for the automotive and aerospace industry. They are looking to bring in an additional mechanical assembly technicians to join their growing team. You'll feel valued for your hard work and gain recognition when doing a great job. Your Role As Mechanical Assembly Technician:
* Mechanical Assembly Technician role - Workshop based * Carry out testing and assembly * Use hand and power tools The Successful Mechanical Assembly Technician Will Have:
* Experience as a mechanical assembly technician / fitter / engineer or similar * Experience with mechanical assembly from any background. * Live commutable to Slough, London Please apply or contact Issy Mehmet for immediate consideration
Keywords: Mechanical Assembly Technician, engineer, workshop, manufacturing, production, automotive, motorsport, aerospace, assembly, Slough, London, Uxbridge.
This vacancy is being advertised by Future Engineering Recruitment Ltd. The services of Future Engineering Recruitment Ltd are that of an Employment Agency. Please visit our website at futureengineer.co.uk to view other positions we are currently handling. Future Engineering Recruitment Ltd can only accept applications from candidates who have a valid legal permit or right to work in the United Kingdom. Potential candidates who do not have this right or permit, or are pending an application to obtain this right or permit should not apply as your details will not be processed. We will endeavour to respond to all applicants however due to the sheer volume of response, we can only guarantee that candidates who have been shortlisted will be contacted. ....Read more...
We're looking for an experienced Electrician Technician to join a prominent Manufacturing company located in the Goole area. This role offers an hourly rate of up to £20.97, with a day shift schedule from Monday to Friday. In addition to competitive pay, you'll receive a comprehensive benefits package, including a 10% pension contribution, life assurance, private medical insurance, and 25 days annual leave which increases with tenure plus BH.As a Electrician Technician , your responsibilities will include performing installations and maintaining supplies and systems. You must ensure that all work meets statutory and technical standards, including the IET British Standards and Codes of Practice. This role may involve working across various sites within a commutable drive, as agreed upon. You will also handle installation, maintenance, improvements, and capital work to support chemical processes as needed.
Electrician Technician Responsibilities
Diagnose malfunctioning apparatus in systems, including LV circuits, motors, power, and lighting, using test equipment.
Collaborate with the Team Leader/Instrument Control Manager to implement an effective preventive maintenance program for all electrical components and systems.
Work with other engineers to coordinate the installation of specialised components, ensuring project completion.
Utilise blueprints, wiring diagrams, and manufacturer’s installation guidelines to complete electrical projects.
To be considered for this role we are looking for candidates to have a strong knowledge of PLCs, 3 Phase motors, fault finding & trouble shooting on industrial control systems and understanding of drawings. You will also need to hold 18th Edition BS7671 accreditation and ideally an Electrical qualification however this is desirable.Please apply directly for further information regarding this Electrician Technician....Read more...
An exciting opportunity has arisen for an Door Technician to join an independent Roller Shutter, Industrial Door, and Door specialist based in the South East. This permanent role offers excellent benefits, competitive salary and the opportunity for an immediate start.
Our client install, repair, and maintain various types of rolling shutters, industrial doors, shop front doors, as well as automatic and manual aluminium entrance doors with access control systems. Their clients vary, from commercial, High Street retail, schools, hospitals, industrial, manufacturing, etc.
As anDoor Technician, working from both their Romford office in Essex and from home, your work will be scheduled and allocated centrally through their offices, where you will be responsible for Installations, fault finding/repairing and maintenance of a wide range of roller shutters, industrial doors & manual doors of all types.
What we are looking for:
? Previously worked as a Door Technician, Door Fitter, Industrial Door Engineer, Roller shutter Engineer, Door Engineer, Service Engineer, Service Technician, Shutter Door Engineer, Shutter Engineer or in a similar role.
? Essential requirement of previous Field Service experience within this industry.
? Advantageous to have experience with automatic door and door entry systems.
? Good knowledge and experience working with various types of industrial doors.
? Proficient in Mechanical Engineering and Electrical skills.
? Must be able to pass a CRB check for security clearance.
? Possession of a CSCS Card.
? Must have a valid UK Driving License.
Whats on offer:
? Excellent Earning potential - Weekly Bonus & Overtime.
? Company vehicle, Company Phone, Training and Progression
You must have a history within the Roller Shutter / Industrial Door industry to apply for this position.
Important Information: We endeavour to process your personal data in a fair and transparent manner. In applying for this role, Additional R....Read more...
Senior Glazing Technician – Optical Lab Job in Lancaster, Lancashire Full Time | £28,000 - £32,000| Leading Optical Manufacturer
Zest Optical are working in partnership with a UK-leading lens manufacturer to recruit a Senior Glazing Technician for their state-of-the-art optical lab based in Lancaster, Lancashire area.
This is an exciting opportunity for an experienced Glazing Technician or Glazing Supervisor to lead a team in delivering high-volume, high-quality lens glazing and production services to Opticians across the UK.
Role Overview – Senior Glazing Technician
Ensure efficient and accurate production of high-quality ophthalmic lenses
Help drive continuous improvement initiatives
Work with the Lab Manager to implement innovative production strategies, ensuring quality and precision
Train on the MEI machine with full training provided
Monday to Friday, 9am–5pm
Competitive salary between £28,000 to £32,000 DOE
Join an employee owned company which empowers and rewards its employees at every opportunity
Candidate Requirements
Strong knowledge of lens manufacturing, optical glazing, and optical lab operations
Previous management experience in a fast-paced, high-volume optical lab environment
SMC (Tech) qualification is desirable
Quality-focused with a high level of accuracy and attention to detail
Excellent decision-making and task prioritisation skills
Apply Now Are you ready to lead in one of the UK’s top optical labs? If you're an experienced Glazing Technician, Optical Production Supervisor, or Lab Team Leader, we want to hear from you. Click Apply Now to take the next step in your optical career.....Read more...
You will start on the Morning shift (5:50am to 2:00pm), once settled in you will move to the Day shift (7:50am to 4:00pm), eventually the position will be on the PM shift (1:50pm to 00:00pm). When on the PM shift you will only work 4 days a week
Batch Processing: Carry out batch production tasks such as weighing, dispensing, and mixing chemicals using a variety of equipment and techniques, as well as off-loading tankers containing hazardous and flammable products
Operational Standards: Work to approved methods, Standard Operating Procedures (SOPs), and Good Manufacturing Practices (GMP), while keeping the production area clean, safe, and well organised
Health, Safety & Compliance: Follow all Health, Safety, Environmental (HSE) and HR policies, ensuring activities are completed safely and in line with statutory and company requirements
Quality Assurance: Conduct in-process quality checks, daily audits (including tank readings), and batch testing to ensure product consistency, working closely with quality teams to resolve any issues
Documentation & Reporting: Maintain accurate records of production activities, manage stock levels, complete batch documentation on time, and input data into stock control systems
Teamwork & Communication: Take part in daily briefings and Redzone activities, communicate with planning teams to align production schedules, and escalate concerns to your line manager when needed
Continuous Improvement: Support site-wide initiatives that drive improvements in safety, efficiency, and product quality
Training:Over 24 months, you’ll devote a minimum of 6 hours of your working week on ‘off the job’ training. This can include theory training (for example, virtual lessons & online learning), alongside practical training (for example shadowing, mentoring, & time spent writing assignments. Together this will count towards a Level 3 Process Industry Manufacturing Technician apprenticeship.
You’ll be trained by an expert tutor from Tiro as well as an experienced mentor at Miswa Chemicals Ltd who together, will make sure you develop the knowledge, skills, and work habits you’ll need to succeed in your career.Training Outcome:When you join Miswa Chemicals Ltd, the possibilities for your success are limitless. As a successful applicant, you have the potential to secure a full-time position within the company at the conclusion of your apprenticeship.
Through practical training on the job, you will acquire new skills and gain the competence and responsibility required for manufacturing and process operations. This apprenticeship programme serves as a stepping stone towards a rewarding career in process manufacturing, with the added opportunity for the apprentice to become a registered Science or Engineering Technician (RSci/Eng Tech).
This apprenticeship offers opportunities for professional growth, enabling you to specialise in areas such as process optimisation, quality control, or maintenance, and to progress into supervisory or leadership roles within the manufacturing environment.Employer Description:Established in 1979, Miswa Chemicals has grown from modest beginnings into a global player in the automotive and insecticide international markets. Originally focused on meeting a demand for quality automotive products at an affordable price point, Miswa Chemicals first set up for production in a rental unit in Milton Keynes, where its two founders manufactured, filled and packaged by hand, and then sold finished products direct to market.
Miswa maintains quality, value, and trust as core values. Miswa products are relied upon by trusted professionals worldwide, with quality, affordable products manufactured to the highest of standard. From producing responsibly and increasing investment in people and the plant, Miswa has seen exceptional growth, through continuous and ongoing investment enabling the company to serve a global market with millions of heritage brand products.Working Hours :You will start on the Morning shift (5:50am to 2:00pm), once settled in you will move to the Day shift (7:50am to 4:00pm), eventually the position will be on the PM shift (1:50pm to 00:00pm). When on the PM shift you will only work 4 days a week.Skills: Attention to detail,Organisation skills,Problem solving skills,Logical,Team working,Initiative....Read more...
Job Purpose:
As a Quality Technician Apprentice, you will gain practical experience and training in maintaining and improving the company’s Quality Management System (ISO 9001)
You will support the Quality Department in ensuring products meet required standards and learn how to carry out quality inspections, audits, and investigations
Key Responsibilities:
Assist in maintaining the company’s Quality Management System
Support daily quality checks and inspections
Learn to investigate and report non-conformities
Assist in reviewing raw material quality
Help liaise with suppliers and customers under supervision
Participate in internal audits and quality improvement initiatives
Learn to apply quality tools and problem-solving methods
Skills and Attributes:
Willingness to learn and develop technical and quality skills
Good attention to detail and accuracy
Ability to work in a team and follow instructions
Good communication and organisational skills
Interest in manufacturing, engineering, or quality systems
Basic IT skills; willingness to learn SAP (if applicable)
Ability to follow health and safety regulations
Training:
Employer: Marcegaglia UK, Netherton
College: MET Centre, Sandwell College, 404 High Street, West Bromwich, B70 9LB
Apprenticeship Level: Level 3 Engineering and Manufacturing Support Technician
Training Schedule: 4-days per week: On-the-job training at Marcegaglia
Training Outcome:For the right candidate to progress as a full-time employee.Employer Description:Marcegaglia UK is the largest precision tube manufacturer in Great Britain.
It belongs to Marcegaglia, worldwide leading industrial group, with 7,800 employees, 36 plants across 4 continents, a turnover of 7.5 billion euros and 6.5 million tonnes of finished product.Working Hours :Hours - Monday - Friday 8-hours per day including 30-minute break, exact working hours TBC. 23-days holiday & 8-public holidays. Death in Service. Company Pension Scheme. Medicash - Health cash planSkills: Communication skills,IT skills,Attention to detail,Organisation skills,Customer care skills,Problem solving skills,Presentation skills,Administrative skills,Number skills,Analytical skills,Logical,Team working,Creative,Initiative,Non judgemental,Patience,Physical fitness....Read more...
Servicing machines and looking after breakdowns.
Support with any machines that are not producing components due to machine issues.
Looking after other plant and equipment, i.e. electrics and fault finding.
Training Outcome:Fully trained Maintenance Technician.Employer Description:Nasmyth is a cohesive group of engineering businesses that consistently provides high quality services and products. Nasmyth offers world class design, manufacturing assembly and product support services across the fields of precision mechanical and electro-mechanical engineering.Working Hours :Monday - Thursday, 08.00 - 16.45.
Friday, 08.00 - 12.00.Skills: Communication skills,Attention to detail,Organisation skills,Problem solving skills,Analytical skills,Logical,Team working,Creative,Initiative,Non judgemental....Read more...
As a Quality Engineering Apprentice, you will support the engineering team in ensuring that manufactured components meet the highest standards. Your responsibilities will include:
Evaluating process rejects on a daily basis and providing scrap reports if required
Retrieving and setting gauging for shop floor processes in a timely manner
Ensuring gauging is released for external calibration on a weekly basis and maintaining general calibration control
Ensuring the shop floor has the correct inspection records available
Providing PDI support to ensure parts are passed off in a timely manner for required sales
Performing daily process audits against provided checklists to identify non-compliance and communicate remedial actions
Assisting with containment actions to check parts for dimensional failures and perform visual inspections
Using a variety of measurement devices (verniers, bore gauges, micrometers, etc.) to evaluate in-process machined castings
Providing support within more junior roles as required
Assisting with running CMM programs to perform daily checks of parts
Assisting with running CNC machines to manufacture finished components
The above does not expressly define the full extent of the role – other reasonable tasks may also be undertaken
Training:Apprentices will:
Provide technical support and expertise in engineering and manufacturing functions
Interpret engineering data and documentation
Organize workflows and coordinate services for stakeholdersContribute to planning work and resources
Use technical software packages (e.g., CAD) to produce design solutions
Inspect and test equipment or services and produce data from test results
Write technical reports and carry out audits
Support continuous improvement activities
Work within health, safety, and environmental regulations
Course Modules:
Engineering health and safety regulations and standards
Engineering drawing and specifications
Computer-Aided Design (CAD)
Quality control and assurance
CNC programming and robotics
Additive manufacturing
Process engineering
Technical report writing and documentation
Continuous improvement techniques
Assessment:
On-programme assessment: Practical skills assessment, portfolio of evidence, employer and training provider reviews
End Point Assessment (EPA): Practical assessment, professional discussion underpinned by a portfolio, and a multiple-choice knowledge test
Apprentices receive regular support from workplace mentors, assessors, and college tutors throughout the programme
Enrichment Activities:
Employer site visits and guest speakers from the industry
Skills competitions (e.g., WorldSkills UK Engineering)
Engineering and manufacturing project challenges
Specialist workshops and equipment demonstrations
Trips to industry expos and trade shows
Progression Pathways:
Higher Apprenticeship in Manufacturing Engineering
HNC/HND in Mechanical or Manufacturing Engineering
Degree Apprenticeship in Engineering
Roles such as CAD Technician, Quality Control Specialist, CNC Programmer, or Process Engineer
Team Leader or Engineering Supervisor positions
Facilities:
Fully equipped machining workshops with CNC and manual machines
Industry-standard CAD/CAM software
Metrology and inspection equipment
Dedicated engineering classrooms and IT suites
Access to online learning resources and e-portfolios
Workplace:
On-the-job training at the apprentice’s employer location
College:
Training takes place once per week at:Central St MichaelsSandwell Science, Engineering & Manufacturing Centre404 High StreetWest BromwichB70 9LB
Training Frequency:
College sessions: Once per week
Workplace training: Ongoing daily, integrated with normal duties, supported by workplace mentors and assessors
Regular review meetings and progress checks with college tutors and workplace supervisors to monitor development and progress
Training Outcome:Progression Pathways:
Higher Apprenticeship in Manufacturing Engineering
Roles such as CAD Technician, Quality Control Specialist, CNC Programmer, or Process Engineer
Team Leader or Engineering Supervisor positions
Employer Description:The Brockmoor Foundry is a long-established foundry whose core competency is the manufacture of ductile (spheroidal graphite) iron. We manufacture a broad range of metal grades from 400/15 through to 800/2 across a diverse product range. As part of our ongoing commitment to providing a vertically integrated supply solution, we offer a wide range of additional, high precision services including machining and assembly ensuring our role in the supply chain is all encompassing and lean and meets the expectations of an increasingly demanding marketplace. Our enviable customer portfolio (including several global market leaders in Commercial Vehicles, Hydraulics and Off Highway) demands that we embrace a long-term commitment to collaboration and product optimisation whether through Cad support, Solidification analysis or our several years of experience. This same commitment is applied throughout our customer base with large and small accounts alike.Working Hours :Working Hours:
Monday- Thursday
8:00am- 4:30pm
Friday
8:00am- 3:00pmSkills: Communication skills,IT skills,Attention to detail,Organisation skills,Customer care skills,Problem solving skills,Presentation skills,Administrative skills,Number skills,Analytical skills,Logical,Team working,Creative,Initiative,Non judgemental,Patience,Physical fitness....Read more...
At Salesmade Ltd, you’ll train on powerful workshop machines like manual mills, lathes, saws, and even high-tech CNC routers.
You’ll be part of a skilled team, learning how to:
Read cool engineering drawings and turn them into real parts
Transform raw materials into precision components
Keep machines running like a dream
Check product quality and make sure everything’s spot on
Level up to programming and operating CNC machines
Every day is different, and you’ll be gaining real-world experience that sets you up for a future in engineering and manufacturing.Training:You'll be enrolled in the Machining Technician Apprenticeship delivered by Milton Keynes College, specifically at their Innovation & Technology Centre. Typically, one day per week at college, four days per week on-site at Salesmade Ltd.
Work with experienced engineers and technicians
Get hands-on with real machines and real projects
Learn how to turn raw materials into precision parts
Build confidence and skills in a live manufacturing environment
Training Outcome:Upon successful completion of your apprenticeship, a permanent role may be offered. This is more than just a job—it’s your launchpad into a skilled, future-proof career.Employer Description:Salesmade is a top manufacturer working on exciting projects—from custom aluminium parts to greenhouses for Kew Gardens! You’ll be part of a team that builds real stuff that makes a difference.Working Hours :Monday - Friday, shifts to be confirmed.Skills: Problem solver,Good communicator,Team player,Precision focused....Read more...
Apprentice Work Responsibilities:
Assist in production processes: Support the manufacturing of infrared heaters using both manual and CNC machinery
Interpret engineering drawings:
Read and understand technical drawings, specifications, and CAD models to ensure accurate production
Use CAD and technical software: Produce designs, modify layouts, and support engineers in creating manufacturing solutions
Quality control and testing: Inspect components, test equipment, record results, and report any issues to ensure high standards
Support process improvement: Identify inefficiencies, suggest improvements, and assist in implementing better workflows
Technical reporting and documentation:
Write reports, maintain records, and document test results or engineering changes
Collaborate with teams: Work alongside engineers, technicians, and other departments to coordinate tasks and projects
Health, safety, and compliance: Follow all safety protocols and environmental regulations in the workplace
Learn from mentors: Receive guidance and support from experienced engineers, supervisors, and tutors throughout your apprenticeship
Training:
4 days per week on-the-job at Tansun
1 day per week off-the-job training at Sandwell College 404 High Street, West Bromwich B70 9LB
Level 3 Engineering and manufacturing support technician apprenticeship
Training Outcome:For the right candidate to progress as a full-time employee.Employer Description:Tansun is the UK’s leading infrared heater manufacturer. With over 40 years of experience in the heating industry, our vast range of infrared heaters are manufactured to the highest quality, providing optimum heat performance all year round. Each infrared heater range is designed with unique features, specific to the heating sectors and applications they target.
Fully IP rated weatherproof heaters specially created for outdoor commercial heating, premium infrared heaters with glare reducing gold reflectors for ultra low glare heating, even portable heaters with anti-tilt safety devices for emergency mobile heating. We offer the largest range of domestic, commercial and industrial infrared heaters in the world today!Working Hours :Hours to be discussed at interviewSkills: Communication skills,IT skills,Attention to detail,Organisation skills,Customer care skills,Problem solving skills,Presentation skills,Administrative skills,Number skills,Analytical skills,Logical,Team working,Creative,Initiative,Non judgemental,Patience,Physical fitness....Read more...
An exciting opportunity has arisen for an Door Technician to join an independent Roller Shutter, Industrial Door, and Door specialist based in the South East. This permanent role offers excellent benefits, competitive salary and the opportunity for an immediate start.
Our client install, repair, and maintain various types of rolling shutters, industrial doors, shop front doors, as well as automatic and manual aluminium entrance doors with access control systems. Their clients vary, from commercial, High Street retail, schools, hospitals, industrial, manufacturing, etc.
As anDoor Technician, working from both their Romford office in Essex and from home, your work will be scheduled and allocated centrally through their offices, where you will be responsible for Installations, fault finding/repairing and maintenance of a wide range of roller shutters, industrial doors & manual doors of all types.
What we are looking for:
* Previously worked as a Door Technician, Door Fitter, Industrial Door Engineer, Roller shutter Engineer, Door Engineer, Service Engineer, Service Technician, Shutter Door Engineer, Shutter Engineer or in a similar role.
* Essential requirement of previous Field Service experience within this industry.
* Advantageous to have experience with automatic door and door entry systems.
* Good knowledge and experience working with various types of industrial doors.
* Proficient in Mechanical Engineering and Electrical skills.
* Must be able to pass a CRB check for security clearance.
* Possession of a CSCS Card.
* Must have a valid UK Driving License.
Whats on offer:
* Excellent Earning potential - Weekly Bonus & Overtime.
* Company vehicle, Company Phone, Training and Progression
You must have a history within the Roller Shutter / Industrial Door industry to apply for this position.
Important Information: We endeavour to process your personal data in a fair and transparent manner. In applying for this role, Additional Resources will be acting in your best interest and may contact you in relation to the role, either by email, phone or text message. For more information see our Privacy Policy on our website. It is important you are aware of your individual rights and the provisions the company has put in place to protect your data. If you would like further information on the policy or GDPR please contact us.
Additional Resources Ltd is an Employment Business and an Employment Agency as defined within The Conduct of Employment Agencies & Employment Businesses Regulations 2003.
....Read more...
Join a high-growth, innovation-led team in Poole that has recently invested over £1 million in new infrastructure. If youre an experienced Electrical Technician who thrives on building, wiring, and testing complex machinery to a high standard, this is a superb next step.
Youll work within a modern manufacturing environment, collaborating with mechanical, test, and quality teams to deliver right-first-time builds.
Key responsibilities of an Electrical Technician:
- Assemble and wire electrical systems from detailed electrical drawings and circuit diagrams.
- Install and integrate electrical panels into complex machinery.
- Perform electrical tests and safety checks; maintain accurate build/test records.
- Contribute to continuous improvementidentify issues, propose fixes, and help standardise best practice.
What were looking for
- Time-served apprenticeship or equivalent experience in electrical assembly.
- 2+ years hands-on experience of panel board population and electro-mechanical wiring.
- Confident reading/interpreting electrical schematics and wiring diagrams.
- Experience of functional testing and fault-finding.
- IPC certifications (desirable).
What youll bring
- Familiarity with a range of voltage systems and safe isolation.
- Meticulous, methodical approach with strong attention to detail and documentation.
- Flexible mindset, team player, and eagerness to learn new skills.
Whats on offer
- Competitive salary (DOE) with annual pay reviews.
- 25 days holiday + bank holidays and a Christmas shutdown.
- Enhanced pension scheme.
- Cycle-to-work scheme & eyecare vouchers.
- Refer-a-friend rewards.
- Ongoing training and professional development.
Why apply?
Youll be joining a supportive, forward-thinking business with real investment in people, processes, and equipmentgiving you the platform to grow your capability and your career.
How to Apply To learn more or apply immediately, contact:
Ian Broadhurst Holt Engineering
07734 406996
ian.broadhurst@holtengineering.co.uk....Read more...
An exciting opportunity has arisen for an Industrial Door Engineer to join an independent Roller Shutter, Industrial Door, and Door specialist based in the South East. This permanent role offers excellent benefits, competitive salary and the opportunity for an immediate start.
Our client install, repair, and maintain various types of rolling shutters, industrial doors, shop front doors, as well as automatic and manual aluminium entrance doors with access control systems. Their clients vary, from commercial, High Street retail, schools, hospitals, industrial, manufacturing, etc.
As anIndustrial Door Engineer, working from both their Romford office in Essex and from home, your work will be scheduled and allocated centrally through their offices, where you will be responsible for Installations, fault finding/repairing and maintenance of a wide range of roller shutters, industrial doors & manual doors of all types.
What we are looking for:
? Previously worked as an Industrial Door Engineer, Roller shutter Engineer, Door Engineer, Service Engineer, Service Technician, Door fitter, Shutter Door Engineer, Shutter Engineer, Door Technician or in a similar role.
? Essential requirement of previous Field Service experience within this industry.
? Advantageous to have experience with automatic door and door entry systems.
? Good knowledge and experience working with various types of industrial doors.
? Proficient in Mechanical Engineering and Electrical skills.
? Must be able to pass a CRB check for security clearance.
? Possession of a CSCS Card.
? Must have a valid UK Driving License.
Whats on offer:
? Excellent Earning potential - Weekly Bonus & Overtime.
? Company vehicle, Company Phone, Training and Progression
You must have a history within the Roller Shutter / Industrial Door industry to apply for this position.
Important Information: We endeavour to process your personal data in a fair and transparent manner. In applying for this....Read more...
An exciting opportunity has arisen for an Door Fitter to join an independent Roller Shutter, Industrial Door, and Door specialist based in the South East. This permanent role offers excellent benefits, competitive salary and the opportunity for an immediate start.
Our client install, repair, and maintain various types of rolling shutters, industrial doors, shop front doors, as well as automatic and manual aluminium entrance doors with access control systems. Their clients vary, from commercial, High Street retail, schools, hospitals, industrial, manufacturing, etc.
As anDoor Fitter, working from both their Romford office in Essex and from home, your work will be scheduled and allocated centrally through their offices, where you will be responsible for Installations, fault finding/repairing and maintenance of a wide range of roller shutters, industrial doors & manual doors of all types.
What we are looking for:
? Previously worked as a Door Fitter, Industrial Door Engineer, Roller shutter Engineer, Door Engineer, Service Engineer, Service Technician, Shutter Door Engineer, Shutter Engineer, Door Technician or in a similar role.
? Essential requirement of previous Field Service experience within this industry.
? Advantageous to have experience with automatic door and door entry systems.
? Good knowledge and experience working with various types of industrial doors.
? Proficient in Mechanical Engineering and Electrical skills.
? Must be able to pass a CRB check for security clearance.
? Possession of a CSCS Card.
? Must have a valid UK Driving License.
Whats on offer:
? Excellent Earning potential - Weekly Bonus & Overtime.
? Company vehicle, Company Phone, Training and Progression
You must have a history within the Roller Shutter / Industrial Door industry to apply for this position.
Important Information: We endeavour to process your personal data in a fair and transparent manner. In applying for this role, Additional Resources....Read more...
