You’ll train as a qualified vehicle technician whilst working on HGVs and refuse collection Vehicles. Welding and fabrication repairs will also be carried out. The successful candidate can expect a high-quality training package with excellent career prospects.
To engage in formal training and education over a defined period and return to the workforce to shadow and learn from mentors and colleagues
Complete exams & assignments and ensure all assignment work is completed in a timely manner and to a high standard
Complete training plan
Follow health and safety procedures and maintain a clean, safe workspace
Accurately complete job records, training logs, and documentation
Follow health and safety procedures and maintain a clean, safe workspace
Accurately complete job records, training logs, and documentation
Training:The apprenticeship training is delivered via weekly block releases at S&B throughout the year. Learning will also take place in the workplace, and a S&B Development Coach and Workplace Mentor are allocated to support and monitor your progress to help you reach your goals and manage your workload. Your employer will pay you when you are attending weekly training blocks at S&B.
More training information:
S&B Automotive Academy is a specialist apprenticeship training provider located in Bedminster, Bristol. Whether you're seeking to kickstart your career in the automotive industry or business industry, S&B Automotive Academy is your go-to partner for excellence in training!
S&B has been training apprentices since the 1970’s and is one of the largest training providers in the Automotive and Business sector. We pride ourselves on our collaboration with a wide range of employers
To be considered for this apprenticeship you must have GCSEs, Functional Skills or Key Skills at grade C/4 or above in English and maths (or equivalent), If your grades are below this, we will discuss your options for taking functional skills in maths and/or English. As well as this, predicated grades are accepted, and work experience or knowledge is beneficial but not essential.
As a result you will receive the following:
Level 3 Heavy Vehicle Service and Maintenance Technician Apprenticeship Standard
Level 2 Functional Skills in maths & English (if not already exempt)
Training Outcome:
We are committed to providing you with all the support and training you need to gain your apprenticeship qualification and to develop your career further with us
As a company we love to help our employees by encouraging them, this could open up even more career opportunities
Employer Description:Builders Merchants Bath and Radstock“Champion’s staff are really helpful and, over the last 15 years, we have had almost annual requirements for stone for building and for decorative stone and gravel in the garden and we are always impressed by the service and the stone.” “Great company. Great quality service and product.”Working Hours :Working Pattern
Monday to Friday
40 hours
8am to 5pm
1 Hour LunchSkills: Communication skills,IT skills,Attention to detail,Organisation skills,Customer care skills,Problem solving skills,Presentation skills,Administrative skills,Number skills,Analytical skills,Logical,Team working,Creative,Initiative,Non judgemental,Patience,Physical fitness....Read more...
Role Summary:
The Data Technician Apprentice supports Ginger Nut Training by collecting, validating, preparing, and presenting operational data to support quality assurance, compliance, learner progress, and employer reporting. Working within the Delivery Support Team, the role helps ensure data is accurate, timely and useful for decision‑making, while completing the Level 3 Data Technician apprenticeship.
This role may particularly suit someone who enjoys spotting patterns, solving problems, organising information and working with data.
Most work will be managed through clearly defined tasks, project plans and reporting schedules, with support available when priorities change.
Key Responsibilities - without limitation, this role may include the following duties:
Data Collection & Validation:
Support the collection and validation of learner, employer and operational data
Assist with checking and improving data accuracy across systems (e.g. learner records, reviews, OTJ evidence)
Identify missing, inconsistent or incorrect data and flag issues to the appropriate team
Reporting & Dashboards:
Support the creation of regular learner and employer data reports (e.g. progress reports, engagement summaries)
Maintain and update dashboards and trackers used by Admin, Quality and Engagement teams
Assist with preparing data for management reports, SAR/QIP evidence and audit activity
Preparing reports for clients
Analysing data to identify patterns as well as using spreadsheets/Power BI for data visualisation to present data.
Funding, Quality & Compliance Support:
Support the Funding & ILR team with data checks linked to ILR submissions and PDSAT reviews (under supervision)
Assist with preparing evidence and datasets for quality reviews, audits and inspections
Help maintain clear data records to support audit readiness and compliance assurance
Systems & Digital Tools:
Use internal systems and digital tools (e.g. MIS, spreadsheets, CRM system and Learning ePortfolio platform)
Support data organisation, version control and secure storage in line with data protection requirements
Learn to produce data visualisations, charts and summaries to support decision‑making
Cross‑Team Support:
Work collaboratively with Administration, Quality, Funding and Client Engagement Teams
Respond professionally to internal data requests within agreed timescales
Participate in team meetings and contribute to continuous improvement discussions
Support the maintenance and accuracy of contact and engagement data used for B2B employer newsletters and learner communications, ensuring mailing lists are up to date, segmented correctly and compliant with data protection requirements
Support back-office coordination activities, including learner administration, pipeline tracking, and webinar or meeting scheduling
Training Outcome:
Progression into permanent roles will be reviewed at approximately the 12‑month stage, subject to performance and business needs
Where a permanent role is not available, Ginger Nut Training will provide support with job searching and applications, interview preparation & career guidance and progression support
Employer Description:Ginger Nut Training is an independent training provider of apprenticeships and trains people at businesses across the country at companies like The Department for Education, The National Theatre, Amex, Amazon, Colchester Hospital, Essex County Council and more.
We welcome applications from neurodivergent candidates, including autistic people, those with ADHD, dyslexia, dyspraxia and other neurological differences. We can provide reasonable adjustments throughout the recruitment process, including interview questions in advance, additional processing time and alternative ways of demonstrating skills.Working Hours :Monday - Friday, 09:00 - 17:00.Skills: Communication skills,IT skills,Attention to detail,Problem solving skills,Logical,Team working,Creative,Initiative,Flexible and adaptable....Read more...
£2000 Bonus, 11% pension scheme, sociable working hours and 31 days annual leave are just a few of the perks that the successful Lead Mechanical Fitter will enjoy when joining this innovative and progressive manufacturing business based in Huddersfield.Employing around 50 people at their Huddersfield facility, this impressive organisation manufactures a range of cutting-edge, niche & value-adding products specifically for the printing industry. Over their 50 years in business, they have successfully installed over 7000 of their products with customers in over 40 different countries.Because of continued growth and demand of their products, this impressive engineering organisation are now actively recruiting for a Lead Mechanical Fitter to join their team on a permanent basis.For the Lead Mechanical Fitter position, we are keen to receive applications from individuals who possess:
Formal qualifications within a relevant discipline (Apprenticeship, HNC, HND, BTEC/NVQ/City & Guilds Level 3 etc.)
Stable work & career history, with experience working in a similar role (Assembly Fitter, Service Engineer, Maintenance Technician etc.)
The ability to effectively work with, and install complex mechanical and pneumatic elements, as well as some basic electrical elements
Someone who is comfortable working in a leading role, potentially with previous supervisory or management experience
Working hours of the Lead Mechanical Fitter: 40 Hours per week spread across a regular day shift:
Monday to Thursday – 07:30 to 16:30
Friday – 07:30 to 14:00
On offer to the successful Lead Mechanical Fitter:
Annual Salary: £45,000.00 (£21.63 per hour)
Annual Bonus of £2,000.00 (£500 paid quarterly)
Holiday Entitlement: 33 Days including statutory holidays
Pension Scheme: 11% Combined (6% employer / 5% employee)
Regular overtime paid at 150%
Private healthcare (Vitality) with the option to add family members
To be considered for the Lead Mechanical Fitter position, please click “Apply Now” and attach a copy of your CV, alternatively please contact Callum Good at E3 Recruitment for more information.....Read more...
Support the maintenance and installation of plumbing/heating systems including installation of pipework, fitting radiators, boilers
Use tools and machinery safely (training will be provided)
Follow instructions, read and interpret drawings
Follow health and safety guidance, including risk assessments, safe systems of work, reporting accidents or concerns
Follow The Crown Estate’s policies (e.g. attendance, punctuality, reporting absence)
Complete apprenticeship learning activities, including on-the-job and off-the-job training, maintaining learning logs
Work well as part of a team and build positive relationships
Follow instructions and ask for help when needed
Provide a good level of service to customers and colleagues
Support events and engagement activities when required
Represent Windsor Great Park in a professional and positive way
Demonstrate The Crown Estate behaviours at all times - working Better Together through inclusive collaboration; showing Candour with Care by being honest, respectful, and constructively challenging; acting Resourcefully by seeking innovative, efficient solutions; and being Accountable through clear ownership, reliability, and follow through
Training:
Plumbing and Domestic Heating Technician Level 3
One day a week at Slough & Langley College
Training Outcome:At the end of the programme, the apprentice will be considered for any permanent vacancies. Please note permanent positions require someone to have a full driving licence.Employer Description:The Crown Estate is a prestigious organisation that manages an extensive portfolio of properties across the UK, including historic landmarks, retail spaces, and natural environments. We are committed to excellence, sustainability, and providing exceptional experiences for our visitors. As part of our team, you will contribute to maintaining the high standards and reputation of The Crown Estate.Working Hours :Monday to Friday 7.30am to 4.30pm (plus two weekends per year)Skills: Customer care skills,Logical,Team working,Physical fitness,Basic numeracy & measuring,Follow instructions & drawings,Use tools safely,Good communication & IT,Problem-solving & initiative,Strong attention to detail,Interest in plumbing & estate,Follows health & safety rules,Positive and willing to learn,Responsible,Flexible and adaptable....Read more...
The IT Technician Apprentice will join the school’s IT team and work under the guidance of experienced IT staff and the IT Manager to provide support for students, teachers and administrative teams with day-to-day technical needs.
Key Responsibilities:
Identify and report IT issues in a timely manner to the IT team to resolve
Provide 1st and 2nd line technical support to staff and students, including troubleshooting hardware, software, and network issues
Handle support calls, log and manage tickets in the helpdesk system
Assist with the setup, maintenance, and repair of computers, printers, and other school IT equipment
Support the installation and configuration of software applications across the school network using device management software
Support the creation of new user accounts and the management of permissions to files and digital systems
Help maintain accurate records of IT assets including periodic audits of all hardware
Learn and adhere to school policies regarding data protection, safeguarding, and ICT security
Perform routine network administration tasks under the supervision and guidance of the IT Manager
Contribute to IT projects, such as system upgrades or new technology rollouts
Use remote access tools to assist staff to resolve issues over the phone
Write, and update how-to guides for staff for common issue resolution
Ensure helpdesk tickets are kept up to date and follow up with staff on any updates to outstanding problems
Training Outcome: A role may be offered to the right candidate upon successful completion of the apprenticeship.Employer Description:St Rose’s is the organisational name in which St Rose’s Special School, St Martin’s College and Residential Care sits within, working on the same site and sharing some facilities.Working Hours :37 hours per week Monday to Friday. Term-time only so the salary will be adjusted to reflect this . 1 day a week release for college sessions. Start/end time to be agreed with successful candidate.Skills: Communication skills,IT skills,Attention to detail,Organisation skills,Team working,Non judgemental,Patience....Read more...
Support the Teaching & Learning Team to enhance the learning experience through effective use of digital technologies
Work collaboratively with teachers, support staff and managers to promote the consistent and effective use of digital tools within teaching, learning and assessment
Support the exploration and promotion of emerging digital technologies and approaches, including AI, immersive learning and interactive platforms
Assist in monitoring and reporting on the use and impact of digital technologies across the curriculum
Support the setup, maintenance and effective use of digital and immersive equipment, working with IT services to ensure resources are available, safe and fully operational
Contribute to the development and organisation of digital resources, systems and platforms to support both learning and administrative processes
Training:
Delivery to be completed on-site and 6 hours per week off the job training either at Barnsley College or your place of work
Student to complete an Advanced Digital Support Technician Level 3 Apprenticeship
Functional Skills in maths and English, if required
Training Outcome:
Possible Progression Opportunities
Employer Description:We are a further education college. With a wide range of over 300 courses covering subjects from Animal Care, Business and Catering, to Forensics, Motorsport and Performing Arts, our campuses offer purpose-built accommodation for each subject to ensure that our students are learning in industry-standard facilities that reflect the environment you will work in after finishing your studies. Many of our College facilities are working and operating as commercial businesses alongside everyday teaching. This means you will get the opportunity to not only learn in the right environment for your studies but gain real life work experience in your chosen career, giving you a better chance over other candidates when you come to apply for employment.
Working Hours :Monday - Thursday, 8.30am -- 5.00pm and Friday, 8.30am-4.30pm.Skills: Communication skills,IT skills,Attention to detail,Organisation skills,Customer care skills,Administrative skills,Team working,Creative,Initiative,Use of basic digital tools,Interest in digital technology....Read more...
Provide technical support during the construction and project close-out phases
Assist with the design, planning and delivery of construction projects while developing an understanding of engineering solutions and how they align with industry standards, specifications and codes of practice
Following quality assurance processes
Assist with setting out construction works, developing an understanding of how to ensure accuracy and follow project plans
Learn how to collect and interpret technical data, supporting engineering designs and decision-making while developing confidence in basic analysis techniques
Assist with identifying and resolving design issues during construction, observing how senior staff apply engineering principles and contributing to simple problem-solving tasks
Develop an understanding of document control procedures, helping to check that the correct drawing and document revisions are in use on site and practising good information-management habits
Participate in supervised site surveys, inspections and data-gathering activities, building familiarity with design specifications, standards and statutory requirements while learning how compliance is assessed
Build communication skills by preparing basic technical notes and contributing to reports, practising the use of appropriate engineering terminology and learning how to present information clearly in both verbal and written formats
Training:This apprenticeship is delivered as a weekly day release at our Stratford campus E15.
Level 3 Civil Engineering Technician
Behaviour, Skills and Knowledge
Training Outcome:There is an opportunity to secure a permanent position after successfully completing the apprenticeship.Employer Description:Barhale is a business founded on family values, having been established by our Chairman, Dennis Curran, in 1980. We are one of the largest privately owned civil engineering and infrastructure specialists in the UK, with over 40 years of experience in providing design, civil engineering and maintenance services working across multiple sectors.Working Hours :Monday to Friday 7.30 am to 5.30pmSkills: Communication skills,IT skills,Attention to detail,Organisation skills,Problem solving skills,Number skills,Analytical skills,Logical,Team working,Non judgemental....Read more...
About the Role:
As a Metal Fabrication Apprentice, you will play an essential role in supporting the fabrication and maintenance of steel moulds, reinforcement components, frames, and other metalwork structures used throughout Tracey Concrete’s production lines. These components are vital for manufacturing a wide range of precast concrete products, including drainage systems, headwalls, manhole components, agricultural solutions, and structural elements supplied throughout the UK and Ireland.
This apprenticeship offers a hands‑on technical pathway for individuals eager to develop strong fabrication and engineering skills within a busy, modern manufacturing environment.
Key Responsibilities:
Fabrication Work:
Assist in the fabrication of steel products, including cutting, shaping, welding, and assembling components according to technical drawings and specifications
Equipment Operation:
Learn to operate and maintain various fabrication equipment such as saws, drills, welders, and CNC machines, ensuring safe and efficient use
Quality Control:
Participate in quality control processes to ensure all products meet industry standards and client specifications, including inspecting and testing fabricated items
Safety Practices:
Follow health and safety guidelines to maintain a safe working environment, including the use of personal protective equipment (PPE) and adherence to safe work practices
Team Collaboration:
Work closely with experienced fabricators, engineers, and other team members to complete projects on time and to high standards
Documentation:
Assist in maintaining accurate records of fabrication processes, including work orders, material usage, and project progress
Learning and Development:
Engage in continuous learning and professional development, including attending training sessions, workshops, and gaining relevant certifications
Training:
Level 3 Maintenance and operations engineering technician Apprenticeship Standard
Functional Skills in maths and English, if required
Embedded qualification to ensure all knowledge is provided (Diploma in Engineering Technology)
Training will be delivered one day per week, term time, and is based at our Engineering and Electrical Centre – Ruddington.
The facilities are in creation to enrich the student experience, developing them with the necessary skills using industry recognised equipment to ensure the apprentice receives training closely matched to the employer’s and Industry
https://www.instituteforapprenticeships.org/apprenticeship-standards/st0607-v1-3Training Outcome:
Potential opportunity for a permanent role within the company following successful completion of the apprenticeship
Employer Description:Tracey Concrete is a long‑established and reputable manufacturer of precast and ready‑mix concrete products, serving customers throughout the UK and Ireland. Founded in 1979, the company has grown from its early beginnings as a family‑run contracting and readymix business into one of the leading suppliers of precast drainage, tunnelling, agricultural, and infrastructure products in the region. With modern, computerised batching systems, advanced manufacturing processes, and an experienced workforce, Tracey Concrete consistently delivers high‑quality, British‑Standard‑certified products. Their in‑house quality team rigorously tests materials and finished goods to ensure reliability, performance, and compliance across all product lines.
As an employer, Tracey Concrete offers diverse roles across manufacturing, engineering, project management, operations, and safety, supported by strong leadership and ongoing investment in skills and technology. The company is recognised for its supportive culture, opportunities for progression, and its contribution to shaping essential infrastructure across the UK and Ireland.Working Hours :Monday- Friday, 10.00am- 4.00pm with a 30 min lunch.Skills: Communication skills,Organisation skills,Customer care skills,Problem solving skills,Presentation skills,Analytical skills,Logical,Team working,Creative,Initiative,Non judgemental,Patience....Read more...
Mechanical Assembler Glasgow £28,000 to £30,500 + Four Day Working Week + Monday to Thursday 07:00 to 17:00 + No Weekends + Full Training + Great Staff Retention + Long Term Job Security + Supportive Family Feel Environment + Work Life Balance Work a four-day week with a company that provides security, stability and work life balance. As Mechanical Assembler, you’ll receive full training allowing you to do the job to the best of your ability. If you are mechanically minded with hands on experience in a workshop or assembly environment, this is a great opportunity to join a secure and growing business with long staff tenure that value and look after their staff. In this role as Mechanical Assembler, you will be based in a workshop environment, assembling mechanical components learning from experienced engineers, and contributing to a team that prides itself on work life balance, good culture & support throughout.
Your Role as a Mechanical Assembler Will Include
Assembling mechanical elements on a variety of components
Installing doors, hinges, handles and hardware
Completing sub-assemblies
As a Mechanical Assembler You Will Need to Have
Demonstrable mechanical aptitude
Hands on mechanical experience
Confidence using hand tools
Experience in workshop, assembly, service or fitting environments For immediate consideration please apply directly or call 07458143259 This vacancy is being advertised by Future Engineering Recruitment. The services of Future Engineering Recruitment are that of an Employment Agency. Please visit our website at futureengineer.co.uk to view other positions we are currently handling. Future Engineering Recruitment can only accept applications from candidates who have a valid legal permit or right to work in the United Kingdom. Potential candidates who do not have this right or permit or are pending an application to obtain this right or permit should not apply as your details will not be processed. We will endeavour to respond to all applicants however due to the sheer volume of response, we can only guarantee that candidates who have been shortlisted will be contacted. Mechanical Fitter, Technician, Industrial, Assembly, Engineering, Engineer, Workshop, Plant, Fabrication, Production, Assembler, Maintenance, Installation, Manufacturing, Mechanic
....Read more...
Your duties will include:
Working within the panel shop environment understanding the concepts of panel manufacture, understanding wiring schematics and layout GA’s.
Assisting engineers with commissioning of controls systems, reading PLC code with hands on experience of code changes and HMI graphic implementation.
Commissioning of control applications and 4-20ma loop validations.
Assisting with panel and control cable installations.
Understanding instrumentation installations and electrical switchgear applications.
Training:Year 1 of the Level 3 Maintenance and Operations Engineering Technician Apprenticeship Standard, the learner will attend four days a week within IPS Rochester workshop completing practical skills (Performing Engineering Operations) and one day a week studying the Technical Certificate.
In Year 2, the Apprentice moves to day-release and will attend IPS one day a week to continue the Technical Certificate. Starting in Year 2 and continuing until completion in Year 4. The Apprentice will continue to receive regular training contact with IPS all throughout the programme.Training Outcome:Shortlisted applicants will be required to complete an eligibility check phone call with IPS International, Apprenticeship Training Provider. Please note that your application cannot proceed without completing this call.
Enrolment onto your apprenticeship programme is subject to prior attainment checks, and your Personal Learning Record will be reviewed upon successful appointment. We are also obligated to follow the guidelines around eligibility, set out by the government apprenticeship funding rules. NB: Please include minimum qualifications (GCSE Maths and English grades) in your apprenticeship application. Tailor your application to the vacancy, dedicating 1-2 paragraphs for each question to demonstrate interest in the role and the company.
**If you are unsuccessful, you will be automatically added to our Talentpool list where future vacancies will be sent to you. If you would like to opt out of this mailing list please select unsubscribe in the email.**Employer Description:For over 35 years, AVK has provided generator and uninterrupted power supply solutions for mission-critical services and systems. No matter the scale of the project or its complexity, clients rely on us to deliver the best-in-class solutions in the smartest, most sustainable and cost-conscious ways.Working Hours :Monday to Friday, 8.00am – 4.30pm (1hr Lunch).Skills: Communication skills,IT skills,Organisation skills,Logical,Team working,Initiative....Read more...
Service technicians are trained in all areas of vehicle mechanics and electronics, from engine and exhaust systems to air conditioning and security features.
The role will vary by the employer based upon the specific needs of the location, but the position typically involves:
Developing an understanding of workshop equipment
Advising the service receptionists about required repairs
Producing time estimates
Maintaining repair and service records
Training:
The programme lasts for at least 36-months (3-years) and you'll achieve a nationally recognised qualification
All our apprentices are employed through the dealer network and attend weeklong block training at the Calex UK Training Academy in Slough.
Block training is complemented by a combination of regular coaching visits from one of our experienced coaches as well as Virtual Classroom sessions and E-Learning modules
Your development is supported through your apprenticeship journey, with your learning focused towards achieving a qualification recognised across the motor industry
This will provide the foundation to develop your career, as there are lots of opportunities within our expanding dealer network to progress and move into new roles once you’ve successfully completed the programme
Qualification: Level 3 Motor Vehicle Service and Maintenance Technician (Light Vehicle)
Before the Standard is met, all apprentices must hold a certificate that meets the EU’s 2014 F-gas regulation
Training Outcome:
There are lots of opportunities within our expanding dealer network to progress and move into new roles once you’ve successfully completed the programme
Employer Description:Welcome to Porsche Centre Portsmouth, located on Lakeside Business Park, Western Road in Portsmouth.
Our established dealership facilitates the sales of new Porsche cars and Approved Pre-Owned cars, servicing, repairs, MOTs, plus parts and accessories.
Our Centre has an experienced team renowned for their first-class customer service. All our Pre-Owned Porsche models are carefully selected by our dedicated used car buyer. Whether you are looking for a new Porsche or an Approved Pre-Owned model, our team will be able to support you in your decision with expert guidance and tailored customer support.Working Hours :Monday - Friday, 8.30am - 5.30pm.Skills: Communication skills,IT skills,Attention to detail,Organisation skills,Problem solving skills,Analytical skills,Team working....Read more...
Service technicians are trained in all areas of vehicle mechanics and electronics, from engine and exhaust systems to air conditioning and security features.
The role will vary by the employer based upon the specific needs of the location, but the position typically involves:
Developing an understanding of workshop equipment
Advising the service receptionists about required repairs
Producing time estimates
Maintaining repair and service records
Training:
The programme lasts for at least 36 months (3 years) and you'll achieve a nationally recognised qualification
All our apprentices are employed through the dealer network and attend weeklong block training at our state-of-the-art training centre in Daventry
Block training is complemented by a combination of regular coaching visits from one of our experienced coaches as well as Virtual Classroom sessions and E-Learning modules
Your development is supported through your apprenticeship journey, with your learning focused towards achieving a qualification recognised across the motor industry
This will provide the foundation to develop your career, as there are lots of opportunities within our expanding dealer network to progress and move into new roles once you’ve successfully completed the programme
Qualification: Level 3 Motor Vehicle Service and Maintenance Technician (Light Vehicle)
Before the Standard is met, all apprentices must hold a certificate that meets the EU’s 2014 F-gas regulation
Training Outcome:
There are lots of opportunities within our expanding dealer network to progress and move into new roles once you’ve successfully completed the programme
Employer Description:Group 1 Automotive UK is one of the leading automotive retailer groups in the country, with a network of over 115 dealerships across the UK and more than 7,000 dedicated colleagues. We proudly represent over 21 world-renowned brands, including Audi, BMW, Citroën, CUPRA, Jaguar Land Rover, Ford, Kia, Leapmotor, Lexus, Mercedes-Benz, MINI, Porsche, SEAT, Škoda, smart, Toyota and Volkswagen. Our mission is to deliver an exceptional customer experience at every one of our dealerships.Working Hours :Monday - Friday, 8.30am - 5.30pm.Skills: Communication skills,IT skills,Attention to detail,Organisation skills,Problem solving skills,Analytical skills,Team working....Read more...
Support the setup, planning, and execution of component testing activities
Assist with managing engineering design changes and maintaining associated documentation
Carry out inspections and basic measurements to support component development and validation
Contribute to root cause analysis and recommend improvements to address quality or process issues
Ensure all testing and production activities comply with health, safety, and regulatory standards
Operate basic production machinery and tools safely and in line with Standard Operating Procedures (SOPs)
Work closely with cross-functional teams, including Design, Manufacturing, and Quality
Identify and report maintenance or calibration issues in a timely manner
Maintain a clean, safe, and well-organised work area
Support team-based improvement activities, including quality improvements and cost reduction initiatives
Training:
You will be required to attend Advance 1 Campus, Dudley College, DY1 4AD, 1 day per week in term time only
Upon successful completion of your apprenticeship, you will gain a Level 4 Engineering Manufacturing Technician (mechanical) HNC Apprenticeship qualification.
You will be assigned an assessor who will visit you in the workplace every 6-8 weeks to support you on your apprenticeship
Training Outcome:
Team Leader/Supervisory Roles
Employer Description:Magal Cables has been producing cables for over 80 years for the automotive and defence sectors under various company names and since 1987 has become an original equipment supplier to Nissan, Ford, Toyota and Honda. By 2003 Magal Cables were maintaining supply of service parts for these customers.From 2008 Magal Cables have won new original equipment contracts with Ford and introduced transfer work of mechanical assemblies, pedals, winches and handbrakes, pressing and moulding facilities have since been added as well as gearshift mechanisms and new 1st and 2nd tier automotive customers.
In 2020 the company changed ownership, is now part of Remsons Holdings Ltd and in 2023 as part of the group branding exercise, company is now named Remsons Automotive Limited.Working Hours :Monday to Thursday, 08:15 - 16:45 and Friday, 08:15 - 13:15.Skills: Communication skills,Attention to detail,Problem solving skills,Team working,Understand Microsoft Software,Reliable,Responsible,Time Management,Decision Making skills,Ability to work under pressure....Read more...
JOB DESCRIPTION
The QA Technical Service Representative is responsible for the timely delivery of services as they relate to the quality assurance of Tremco's installed roofing systems within their respective region.
Duties/Responsibilities, Core knowledge:
Lead Technician performing roof patch and repair as necessary and determined by the Quality Assurance Group on Tremco Incorporated roof systems (BUR, Modified Bitumen, Single Ply, Fluid Applied, etc.). Estimate material and labor quantities for roof patch and repair. Perform Job Site Inspections as they relate to quality assurance and/or adjustment work. Perform detailed roof inspections to diagnose and troubleshoot issues and/or concerns. Work with local WTI Field Representatives and/or Supervisors as required or necessary. Provide accurate and timely documentation to ensure that all work was completed properly and that the customer is fully satisfied. Conduct and foster professional and timely communication (via email, voicemail, in person) with the customers, sales reps, field staff, and internal company personnel on all work-related matters. Demonstrate working knowledge of all services provided. Perform any other duty and/or project as required or assigned by the QA Assurance Group.
Skills, Qualifications, Experience, Special Physical Requirements:
High school diploma or GED Prior supervisory skills and ability to manage people and tasks Prior roofing experience including patch and repair skills Knowledge and ability to use basic tools associated with commercial roofing Knowledge and experience monitoring and maintaining Quality Control Functional computer skills Safety training and OSHA knowledge with a commitment to safety at all times Understanding and ability to manage expenses Planning and organizational skills. Able to juggle multiple priorities and demonstrate good task management Work independently, as well as in a team environment, to solve problems and delegate assignments Excellent customer service skills and ability to build relationships Ability to climb up and down interior/exterior ladders to access roofs (minimum of 20 ft) and carry basic hand tools, equipment and/or material up to approx. 100 lbs. over long distances Capable of walking along roof top edges (no fear of heights, good balance, etc.) Ability to handle prolonged exposure to outside weather conditions (heat, cold, etc.) Ability to travel out of town including overnight travel Must have transportation and a valid driver's license Ability to work weekends and/or holidays if needed Ability to pass pre-employment drug test Ability to read, write and speak English The hourly rate for applicants in this position generally ranges between $20 and $33. This range is an estimate, based on potential employee qualifications, operations, needs, and other considerations permitted by law. Benefits: Tremco offers a variety of benefits to its employees, including not limited to: health insurance, paid time off, 401(k) with company match, Company Pension Plan, and continuing education. Qualified applicants will receive consideration for employment without regard to their race, color, religion, national origin, sex, sexual orientation, gender identity, protected veteran status or disability.
ABOUT US
Tremco Construction Products Group (CPG) brings together Tremco Incorporated's Commercial Sealants & Waterproofing and Roofing & Building Maintenance operating divisions; Dryvit Systems, Inc.; Nudura Inc.; Willseal; Weatherproofing Technologies, Inc. and Weatherproofing Technologies Canada, Inc. Structures with Tremco CPG systems are easier to build and maintain, virtually impervious to the elements, and can provide any look desired. Six-sided solutions from Tremco CPG companies deliver demonstrable performance at the lowest possible life-cycle cost, and stop leaks before they happen through ongoing maintenance programs. Building owners gain the peace of mind that comes with industry-leading system warranties - all from a single source platform.Apply for this ad Online!....Read more...
JOB DESCRIPTION
The QA Technical Service Representative is responsible for the timely delivery of services as they relate to the quality assurance of Tremco's installed roofing systems within their respective region.
Duties/Responsibilities, Core knowledge:
Lead Technician performing roof patch and repair as necessary and determined by the Quality Assurance Group on Tremco Incorporated roof systems (BUR, Modified Bitumen, Single Ply, Fluid Applied, etc.). Estimate material and labor quantities for roof patch and repair. Perform Job Site Inspections as they relate to quality assurance and/or adjustment work. Perform detailed roof inspections to diagnose and troubleshoot issues and/or concerns. Work with local WTI Field Representatives and/or Supervisors as required or necessary. Provide accurate and timely documentation to ensure that all work was completed properly and that the customer is fully satisfied. Conduct and foster professional and timely communication (via email, voicemail, in person) with the customers, sales reps, field staff, and internal company personnel on all work-related matters. Demonstrate working knowledge of all services provided. Perform any other duty and/or project as required or assigned by the QA Assurance Group.
Skills, Qualifications, Experience, Special Physical Requirements:
High school diploma or GED Prior supervisory skills and ability to manage people and tasks Prior roofing experience including patch and repair skills Knowledge and ability to use basic tools associated with commercial roofing Knowledge and experience monitoring and maintaining Quality Control Functional computer skills Safety training and OSHA knowledge with a commitment to safety at all times Understanding and ability to manage expenses Planning and organizational skills. Able to juggle multiple priorities and demonstrate good task management Work independently, as well as in a team environment, to solve problems and delegate assignments Excellent customer service skills and ability to build relationships Ability to climb up and down interior/exterior ladders to access roofs (minimum of 20 ft) and carry basic hand tools, equipment and/or material up to approx. 100 lbs. over long distances Capable of walking along roof top edges (no fear of heights, good balance, etc.) Ability to handle prolonged exposure to outside weather conditions (heat, cold, etc.) Ability to travel out of town including overnight travel Must have transportation and a valid driver's license Ability to work weekends and/or holidays if needed Ability to pass pre-employment drug test Ability to read, write and speak English The hourly rate for applicants in this position generally ranges between $20 and $33. This range is an estimate, based on potential employee qualifications, operations, needs, and other considerations permitted by law. Benefits: Tremco offers a variety of benefits to its employees, including not limited to: health insurance, paid time off, 401(k) with company match, Company Pension Plan, and continuing education. Qualified applicants will receive consideration for employment without regard to their race, color, religion, national origin, sex, sexual orientation, gender identity, protected veteran status or disability.
ABOUT US
Tremco Construction Products Group (CPG) brings together Tremco Incorporated's Commercial Sealants & Waterproofing and Roofing & Building Maintenance operating divisions; Dryvit Systems, Inc.; Nudura Inc.; Willseal; Weatherproofing Technologies, Inc. and Weatherproofing Technologies Canada, Inc. Structures with Tremco CPG systems are easier to build and maintain, virtually impervious to the elements, and can provide any look desired. Six-sided solutions from Tremco CPG companies deliver demonstrable performance at the lowest possible life-cycle cost, and stop leaks before they happen through ongoing maintenance programs. Building owners gain the peace of mind that comes with industry-leading system warranties - all from a single source platform.Apply for this ad Online!....Read more...
What you’ll be doing as an ICA Engineer Apprentice:
Learn to carry out planned maintenance, general repairs, and equipment modifications under guidance
Test, inspect, and troubleshoot systems using condition-based monitoring
Become fully trained to use Programmable Logic Controllers (PLC’s) and SCADA (Supervisory Control and Data Acquisition) systems
Work with the instruments and technology that monitor and manage Thames Water’s water and wastewater operations across the network
Please note we may close this advert earlier than the 29th of June, so please do not delay in completing all online assessments to be considered for this role. Training:
Knowledge, skills, behaviours as set out in the standard Engineering Maintenance Technician Level 3
City & Guilds Diploma in Engineering (single discipline)
You’ll train with Basingstoke College of Technology through on-campus or online sessions, with travel and accommodation covered in line with our travel expense policy
Training Outcome:Permanent contract with a 36-month structured programme.Employer Description:Who are we?
We’re the UK’s largest water and wastewater company, with more than 16 million customers relying on us every day to supply water for their taps and toilets. We want to build a better future for all, helping our customers, communities, people, and the planet to thrive. It’s a big job and we’ve got a long way to go, so we need help from passionate and skilled people, committed to making a difference and getting us to where we want to be in the years and decades to come.
Learn more about our purpose and values
Working at Thames Water
Thames Water is a unique, rewarding, and diverse place to work, where every day you can make a difference, yet no day is the same. As part of our family, you’ll enjoy meaningful career opportunities, flexible working arrangements and excellent benefits.
If you’re looking for a sustainable and successful career where you can make a daily difference to millions of people’s lives while helping to protect the world of water for future generations, we’ll be here to support you every step of the way. Together, we can build a better future for our customers, our region, and our planet.
Real purpose, real support, real opportunities. Come and join the Thames Water family. Why choose us? Learn more.
We’re committed to being a great, diverse, and inclusive place to work. We welcome applications from everyone and want to ensure you feel supported throughout the recruitment process. If you need any adjustments, whether that’s extra time, accessible formats, or anything else just let us know, we’re here to help and support.
When a crisis happens, we all rally around to support our customers. As part of Team Thames, you’ll have the opportunity to sign up to support our customers on the frontline as an ambassador. Full training will be given for what is undoubtedly an incredibly rewarding experience. It’s also a great opportunity to learn more about our business and meet colleagues.
Disclaimer: due to the high volume of applications we receive, we may close the advert earlier than the advertised date, so we encourage you to apply as soon as possible to avoid disappointment.Working Hours :Hours: 38-hour week over four working days plus one training day, with a 7:30 am start Monday - Friday, exact working hours TBCSkills: Communication skills,IT skills,Attention to detail,Organisation skills,Customer care skills,Problem solving skills,Number skills,Analytical skills,Logical,Team working,Initiative....Read more...
As an IT Apprentice for Smith Institute your duties would include but are not limited to:
Provide timely support to your colleagues in person, by email and using remote access tools
Configure and maintain company laptops and phones
Help to ensure that office IT equipment is always available and fit for use
Assist the Business Systems Manager, Head of Computing and Digital Solutions Engineers in supporting day to day operations
Help to monitor and maintain cyber security across our systems
Assisting the IT Manager and Computer Systems Manager in supporting the Institute’s day to day operations
Where directed, responding to requests, issues and to IT failures to minimise disruption to staff and projects
Where directed, monitoring and maintenance of IT security in accordance with HBG.5 Security of Computer Systems
Where directed, monitoring and maintenance of cyber security (ATP quarantine, reports from staff, external cyber reports etc)
Assisting in restoring IT capabilities following hardware or software failures
Assisting in developing the Institute’s systems and processes to ensure continued Cyber Essentials PLUS accreditation
Assisting in maintaining staff awareness of cyber threats, including annual training
When invited, participating in the IT Management meeting with ITM, CSM and CTO
Working collaboratively with colleagues to maintain the Institute’s core values
Taking responsibility for safeguarding their own health and safety and that of others in the course of carrying out their duties
Compliance with all of the Institute’s policies and procedures, having particular regard to data protection policies
Taking part in scheduled team meetings and contributing proactively towards furthering the business aims of the Institute
Any other reasonable duties assigned by the line manager or CEO deemed commensurate with the post
Training:Information Communications Technician Level 3 Apprenticeship Standard:
The successful candidate will undertake a 22 month, nationally recognised qualification through TDM. This is a work-based learning programme which will require commitment to block weeks in an online training room once every quarter working towards the qualification along with weekly off the job training and monthly coaching sessions.
You will be required to demonstrate through the standard that you meet all competencies and behaviours, which will lead to the achievement of the qualification. These block weeks will take place online in TDM’s virtual learning platform.
You will have a designated mentor in the workplace to support your learning and at the end of programme will be assessed via an external assessment body.
This is a Level 3 qualification.
Knowledge Areas Include:
Hardware and Networking
Software and Security
ICT Administration
Training Outcome:
Opportunity to progress to a level 4 or Degree level apprenticeship on succesful completion of the level 3 for the right individual
Employer Description:Smith Institute is a leading provider of advanced mathematics, data science, and AI-driven solutions, helping organisations make confident decisions in complex environments. Founded on expertise shaped by work on the Apollo moon landing mission, the Institute combines rigorous analytical thinking with practical application to deliver impactful, real-world outcomes. Today, Smith Institute partners with clients across government and industry worldwide, using data, modelling, and AI to drive transformation, enhance decision-making, and create lasting value for business and society. The Digital Solutions Apprentice supports the work of the Head of Information Security and IT and contributes to the development and delivery of projects while actively gaining new knowledge and skills both on the job and through engagement with the apprenticeship training provider.Working Hours :Monday - Friday, Shifts to be confirmed.Skills: Communication skills,IT skills,Problem solving skills,Analytical skills,Hardware/Software Knowledge,Practical IT Experience....Read more...
£2000 Bonus, 11% pension scheme, sociable working hours and 31 days annual leave are just a few of the perks that the successful Mechanical Fitter will enjoy when joining this innovative and progressive manufacturing business based in Huddersfield.Employing around 50 people at their Huddersfield facility, this impressive organisation manufactures a range of cutting-edge, niche & value-adding products specifically for the printing industry. Over their 50 years’ in business, they have successfully installed over 7000 of their products with customers in over 40 different countries.Because of continued growth and demand of their products, this impressive engineering organisation are now actively recruiting for an Mechanical Fitter to join their team on a permanent basis.Key Responsibilities of the Mechanical Fitter will include:
Building and assembling a range of aftermarket, value-adding products & machines for use in the industrial printing industry
Reading, interpreting and working directly from engineering drawings, schematics and technical diagrams
Effectively using a variety of hand & power tools to fit mechanical, hydraulic, pneumatic and electronic elements & sub-assemblies
For the Mechanical Fitter position, we are keen to receive applications from individuals who possess:
Formal qualifications within a relevant discipline (Apprenticeship, HNC, HND, BTEC/NVQ/City & Guilds Level 3 etc.)
Stable work history with experience working in similar position as a Mechanical Engineer, Technician, Assembler, Maintenance Engineer etc.
Strong working knowledge and understanding of Pneumatics
Working hours of the Mechanical Fitter: 40 Hours per week spread across a regular day shift:
Monday to Thursday – 07:30 to 16:30
Friday – 07:30 to 14:00
On offer to the successful Mechanical Fitter:
Annual Salary: £35,000.00 - £40.000.00 (£16.82 - £19.23 per hour) depending on experience
Annual Bonus of £2,000.00 (£500 paid quarterly)
Holiday Entitlement: 33 Days including statutory holidays
Pension Scheme: 11% Combined (6% employer / 5% employee)
Regular overtime paid at 150%
Private healthcare (Vitality) with the option to add family members
To be considered for the Mechanical Fitter position, please click “Apply Now” and attach a copy of your CV, alternatively please contact Callum Good at E3 Recruitment for more information....Read more...
Full Resprays:
Variation from colour change of a new vehicle into company or client livery to a total respray of a used item that has either been either damage repair or shot blasted ready for a refinished update
Panel repairs:
Repairs to panels on plant or road vehicles to a high standard. This could include, panel beating, metal repairs, welding finishing with filler/stopper, paint build up and final refinishing
Shot Blasting:
Shotblasting of repaired metal work, fabrication work, welding repairs, crack detection, prior to refinishing to OEM standards
Stripping and Refitting:
Removal of panels and trim in preparation for body repairs and refinishing
Mixing Paint:
Matching and mixing paints using computerised technology to OEM standards
Training:The qualification awarded at the end of the scheme would be Vehicle Damage and Paint Technician Level 3.
Training will be provided within our purpose-built workshop at Bassington Avenue Cramlington, supported by day release attending the City of Sunderland College. Training within the workshop would be mentored by current experienced staff.
During term time training would consist of 4 days in the company premises with one day attending Sunderland College.Training Outcome:There is the possibility of full-time employment and progression opportunities upon successful completion of the apprenticeship.Employer Description:Hubbway Limited, established in 1977 are a nationwide supplier of Agricultural and Construction Machinery to major contractors such as BAM, Balfour Beatty, and Laing O’Rourke.
With a fleet in excess of 1000 assets, this demands Quality.Efficiency.Reliability.Organisation.Presentation.Pride.
To achieve this, we have our own in-house, purpose-built workshops that house maintenance facilities, fabrication works, Shotblast facilities, repairs, and refinishing works.
Presentation is at the forefront of our business, whether we are supplying national companies or a one-man band. This demands a high level of attention to ensure our plant is supplied in top class condition at all times.Working Hours :Monday to Friday 07.30 - 17.00 including breaks.Skills: Communication skills,IT skills,Attention to detail,Organisation skills,Customer care skills,Problem solving skills,Presentation skills,Administrative skills,Number skills,Analytical skills,Logical,Team working,Creative,Initiative,Non judgemental,Patience,Physical fitness,Good time keeping....Read more...
Service technicians are trained in all areas of vehicle mechanics and electronics, from engine and exhaust systems to air conditioning and security features.
The role will vary by the employer based upon the specific needs of the location, but the position typically involves:
Developing an understanding of workshop equipment
Advising the service receptionists about required repairs
Producing time estimates
Maintaining repair and service records
Training:
The programme lasts for at least 36-months (3-years) and you'll achieve a nationally recognised qualification
All our apprentices are employed through the dealer network and attend weeklong block training at the Calex UK Training Academy in Slough.
Block training is complemented by a combination of regular coaching visits from one of our experienced coaches as well as Virtual Classroom sessions and E-Learning modules
Your development is supported through your apprenticeship journey, with your learning focused towards achieving a qualification recognised across the motor industry
This will provide the foundation to develop your career, as there are lots of opportunities within our expanding dealer network to progress and move into new roles once you’ve successfully completed the programme
Qualification: Level 3 Motor Vehicle Service and Maintenance Technician (Light Vehicle)
Before the Standard is met, all apprentices must hold a certificate that meets the EU’s 2014 F-gas regulation
Training Outcome:
There are lots of opportunities within our expanding dealer network to progress and move into new roles once you’ve successfully completed the programme
Employer Description:Porsche Centre Bournemouth has represented Porsche on the south coast for over forty years. We can offer our customers network leading facilities, which include multiple direct dialogue bays, a Porsche Approved SMART repair centre as well as state of the art twenty-five vehicle showroom, where we display both New and Porsche Approved vehicles.
Porsche Centre Bournemouth are also proud to boast Porsche Classic Partner status, one of only five UK centres. When entering our centre, you will find our designated Porsche Classic Corner, dedicated to everything Porsche Classic. We also offer Porsche Classic customers, a team of dedicated experts with over 75 Years of experience with the brand.
We are continuously driven by dreams, building a Porsche Community on the south coast, and acting as a central hub for like-minded owners and enthusiasts.Working Hours :Monday - Friday, 8.30am - 5.30pm.Skills: Communication skills,IT skills,Attention to detail,Organisation skills,Problem solving skills,Analytical skills,Team working....Read more...
Join the multiomic revolution! Over the last 20 years, genomic technologies have enabled significant discoveries that bring the promise of personalized medicine closer than ever before. But after two decades of research, it’s clear that genetic variation only tells part of the story – biology is dynamic and more complex than A,C,T,G.
Already, the added information from a multiomic view of biology is yielding important insights into cancer, aging, and neurological disease, and is poised to revolutionise how we understand health and disease beyond canonical variation in DNA. We have launched our first products, the duet +modC and evoC solutions , with more in the pipeline, and are looking to grow and evolve our business accordingly. This is an incredible opportunity to step into an exciting, early-stage company at the cutting edge of science with growth and market impact potential.
The in-house Manufacturing & Operations team with in a wider Research and Development function is a small multi-disciplinary team whose remit is to support our ability to scale and drive the efficient production and distribution of its products. This is an active, practical role where you’ll help keep labs running smoothly supporting equipment, monitoring systems, stock, and general lab organisation. You’ll work alongside experienced team members to ensure labs are safe, compliant, and ready for scientists to do their best work.What you’ll be doing
Support lab operations
Help set up and maintain shared lab spaces so they are clean, organised, and ready to use
Carry out routine checks (e.g. fridges, freezers, general lab condition)
Support general housekeeping to ensure labs are always audit-ready
Equipment & monitoring
Assist with monitoring laboratory systems (e.g. temperature monitoring and alarms) and escalate issues when needed
Help track equipment servicing, calibration, and maintenance schedules
Maintain equipment records, including updating asset registers and filing documentation
Facilities & suppliers
Support coordination of external engineers and service providers (e.g. arranging access, assisting on-site)
Help with small lab moves, improvements, and infrastructure tasks
Assist with maintaining organised and well-functioning lab environments
Stock & organisation
Support receiving and organising deliveries
Help maintain stock levels and storage areas
Ensure materials are stored safely and appropriately (training provided)
Health & Safety
Follow and support lab safety procedures and safe working practices
Assist with Health & Safety activities such as inspections, documentation, and actions
Learn about COSHH and safe handling of materials
Report hazards or issues to senior team members
Projects & improvements
Contribute to lab improvement projects (e.g. space organisation, efficiency improvements)
Training & Development
Work towards a Level 3 Laboratory Technician ApprenticeshipReceive structured training, mentoring, and protected study time
Our Offer
Competitive salary £22,000 per year (up to £24,000 based on experience)
37.5 hours per week
25 days holiday
Private healthcare and life insurance. We operate a stakeholder pension scheme
Eligible to participate in the discretionary annual bonus scheme currently offering an annual on target bonus of 5% of base salary, pro rata paid in accordance with achievements to personal and company goals.Great in-office benefits, friendly and collegial working environment, situated just outside Cambridge on a well appointed Science and Technology park – amenities include on site restaurant, gym, golf course and plentiful parking.Training:Laboratory Technician Level 3.Training Outcome:Because of the technical experience you will gain from working in a laboratory, you will gain skills which many graduates have yet to develop. If you have practical ability, ability to solve problems and good communication skills there are opportunities for progression towards higher qualifications.Employer Description:Our reputation is built on our commitment to prompt professional, personal service and attention to detail, which is reflected in the services we offer and the time we take to get to know our clientele and how to best service their needs.Working Hours :37.5 hours per week, Monday - Friday, 9.00am - 5.00pm.Skills: Administrative skills,Analytical skills,Attention to detail,Communication skills,Initiative,IT skills,Logical,Number skills,Organisation skills....Read more...
JOB DESCRIPTION
Euclid Chemical is a fully owned subsidiary of RPM International (NYSE: RPM), one of the world's largest coatings companies. With over 110 years of experience, we provide innovative solutions to the construction and restoration markets through our extensive range of treatments, sealants, coatings, sealers, and decorative products. Recognized as a 2024 NE Ohio Top Workplace by Energage, Euclid Chemical prides itself on fostering a people-first culture that values collaboration, respect, and growth.
Summary
: Euclid Chemical is currently seeking a Dispenser IT Support Technician to be responsible for managing and troubleshooting PC hardware/software, supporting dispensing equipment systems, providing remote and on-site training, and handling warehouse duties. This role requires technical knowledge in Windows PCs, industrial automation, and mechanical systems, along with strong problem-solving and communication skills.
Essential Duties & Responsibilities:
Ongoing PC Hardware & Software management, troubleshooting, and repair. Including software licensing used in the dispensing equipment.
Maintain & update system functional specs., documentation, and drawings.
Fielding & troubleshooting calls via phone & online support tools.
Remote training Dispenser Service Technicians on field installation, operation, and servicing of systems.
Remote or travel to on-site system pre-commissioning, commissioning, customer training, andstartup of Dispensing equipment.
Warehouse Duties: Shop maintenance, shipping, receiving, inventory stocking, and cleaning.
Collaborate & coordinate activities with Euclid Chemical Managers in Ohio
Education & Experience
High School Diploma or GED.
Certificate training in the areas of responsibility a plus
Windows based PCs & Networks knowledge, or experience.
Industrial automation, electrical, and pneumatic knowledge, or experience.
Hand, power, and measuring tools knowledge, or experience.
Mechanical knowledge, or experience.
Ability to read and comprehend written instructions and technical language normally found inequipment manuals.
Physical Requirements:
Sitting, Standing, Walking, Lifting, Carrying, Pushing, Pulling, Reaching (Various Heights), Keyboarding, Gross & Fine Manipulation, Driving, Stooping, Crouching, Kneeling, Crawling, Climbing (Ladders, Ramps, Stairs)
WHY JOIN EUCLID CHEMICAL?
Joining our team means gaining access to a suite of competitive benefits including:
$25-30 per hour (determined by education and experience)
Annual employee bonus program
Medical, Dental and Vision coverage
Life Insurance, Disability, Parental Leave
401k with company match
Defined benefit pension plan
Vacation and holiday time
Qualified applicants will receive consideration for employment without regard to their race, color, religion, national origin, sex, protected veteran status or disability.Apply for this ad Online!....Read more...
JOB DESCRIPTION
WE WILL TRAIN YOU! NOW HIRING IN MULTIPLE LOCATIONS!
The Commercial Façade Field Technician actively performs and enforces Company safety policy and program to minimize accidents affecting employees, the public, and property. They will be responsible for attending safety meetings, complying with governmental regulations, reporting, and investigating accidents, and planning site-specific job safety procedures including:
$21-38/hour (not including prevailing wage)
Benefits, upon satisfaction of applicable eligibility requirements, include but are not limited to:
401K with company match Company Pension Plan Health Insurance Paid time-off Mileage reimbursement Continuing education
Position Duties & Responsibilities:
Attend and understand daily onsite safety brief prior to the start of the WTI project. Inspect and ensure safety of surroundings, equipment and tools and identify and discuss any safety concerns. Execution of project tasks with knowledge of expected production rates, ensuring tools and materials are used safely and efficiently to complete the assigned project. Complete the project per the scope or work, design and specification of contract & engineering documents as directed by foreman. Responsible to aid foreman in tracking and monitoring project inventory. Maintains highest quality on-site customer relations in projecting positive image. Has knowledge/understanding and performs work in compliance with all governmental rules and regulations affecting work sites and employees, i.e. OSHA, DOT, EEO/Affirmative Action, EPA, etc. Provides management with earliest possible notification of real and potential job problems. Accepts responsibility for the care, custody, and use of company equipment, material, tools, and other assets as assigned by the WTI Commercial Foreman. Understands and executes proper material and equipment usage, maintenance, and storage. Perform any other duty and/or project as required or assigned by the WTI Foreman and/or Commercial Business Manager. Maintains ethical business conduct.
Job Requirements:
Masons & Tuckpointers Concrete Restorations, Caulking Waterproofing Parking Garage Restoration Cold Applied Waterproofing Reliable form of transportation Acceptable background check per company standards Ability to pass a pre-employment drug screen and physical The hourly rate for applicants in this position generally ranges between $21 and $38. This range is an estimate, based on potential employee qualifications, operations, needs, and other considerations permitted by law. Qualified applicants will receive consideration for employment without regard to their race, color, religion, national origin, sex, sexual orientation, gender identity, protected veteran status or disability.Apply for this ad Online!....Read more...
JOB DESCRIPTION
WE WILL TRAIN YOU! NOW HIRING IN MULTIPLE LOCATIONS!
The Commercial Façade Field Technician actively performs and enforces Company safety policy and program to minimize accidents affecting employees, the public, and property. They will be responsible for attending safety meetings, complying with governmental regulations, reporting, and investigating accidents, and planning site-specific job safety procedures including:
$21-38/hour (not including prevailing wage)
Benefits, upon satisfaction of applicable eligibility requirements, include but are not limited to:
401K with company match Company Pension Plan Health Insurance Paid time-off Mileage reimbursement Continuing education
Position Duties & Responsibilities:
Attend and understand daily onsite safety brief prior to the start of the WTI project. Inspect and ensure safety of surroundings, equipment and tools and identify and discuss any safety concerns. Execution of project tasks with knowledge of expected production rates, ensuring tools and materials are used safely and efficiently to complete the assigned project. Complete the project per the scope or work, design and specification of contract & engineering documents as directed by foreman. Responsible to aid foreman in tracking and monitoring project inventory. Maintains highest quality on-site customer relations in projecting positive image. Has knowledge/understanding and performs work in compliance with all governmental rules and regulations affecting work sites and employees, i.e. OSHA, DOT, EEO/Affirmative Action, EPA, etc. Provides management with earliest possible notification of real and potential job problems. Accepts responsibility for the care, custody, and use of company equipment, material, tools, and other assets as assigned by the WTI Commercial Foreman. Understands and executes proper material and equipment usage, maintenance, and storage. Perform any other duty and/or project as required or assigned by the WTI Foreman and/or Commercial Business Manager. Maintains ethical business conduct.
Job Requirements:
Masons & Tuckpointers Concrete Restorations, Caulking Waterproofing Parking Garage Restoration Cold Applied Waterproofing Reliable form of transportation Acceptable background check per company standards Ability to pass a pre-employment drug screen and physical The hourly rate for applicants in this position generally ranges between $21 and $38. This range is an estimate, based on potential employee qualifications, operations, needs, and other considerations permitted by law. Qualified applicants will receive consideration for employment without regard to their race, color, religion, national origin, sex, sexual orientation, gender identity, protected veteran status or disability.Apply for this ad Online!....Read more...
Cloud Telephony Support
Create, amend, and maintain cloud-based telephone system configurations
Process customer requests such as:
Name changes
Call routing updates
User and extension management
Perform basic system changes on live environments, following agreed processes
Assist users with:
Password resets
Login issues
General system access problems
User Support & Training:
Provide first-line support to end users via phone, email, and ticketing system
Deliver basic to moderate user guidance, such as:
Explaining how existing features work
Helping users understand the system functionality already in place
Ensure issues are clearly logged, tracked, and updated within the internal CRM
Network & Connectivity Support
Support customer network connections by:
Running basic diagnostics via online provider portals
Identifying common connectivity faults
Booking engineer visits where required
Carry out basic network maintenance tasks, including:
Changing Wi-Fi usernames and passwords
Configuring new routers prior to dispatch
Preparing equipment for installation or replacement
Communication & Liaison
Speak directly with customers in a professional and confident manner
Liaise with third-party providers for telephony and network services
Communicate updates, issues, and resolutions clearly to:
Customers
Internal team members
Maintain accurate records of all work completed in the CRM
Learning & Development
Gain hands-on experience supporting live customer systems
Learn structured troubleshooting and escalation processes
Shadow senior engineers and gradually assist with more complex technical issues
Develop technical, communication, and problem-solving skills throughout the apprenticeship
Build a strong foundation for progression into a 2nd Line Support role
Training:Delivery to be completed on-site and 6 hours per week off-the-job training either at Barnsley College or your place of work. Student to complete an Advanced Technical Certificate as an Information Communications Technician Level 3 Apprentice. Functional Skills in maths and English, if required. Training Outcome:Possible progression opportunities.Employer Description:Supplier of New and Fully Refurbished IT Hardware, Business Telephone Systems (VoIP & Cloud) and Business Mobile Phone Contracts.Working Hours :Monday to Friday - 8.30am-5.00pm.Skills: Communication skills,IT skills,Attention to detail,Organisation skills,Customer care skills,Problem solving skills,Team working,Initiative,Patience....Read more...
