Medical Devices – Senior Mechanical Design Engineer – Cambridge
Due to successful growth plans, a Medical Devices organization based in Cambridge is currently seeking a Senior Mechanical Design Engineer to contribute to the development and improvement of life-saving Medical Devices.
Collaborating closely with other industry experts, such as electronics design engineers, software engineers, physicists, and other Medical Devices specialists, you will tackle some of the most complex challenges in the development of new Medical Technologies.
Ideally, you will have a background in developing new Medical Devices throughout the entire design life cycle, adhering to ISO 13485 standards. If you have not worked on Medical Devices, we will consider candidates from other highly regulated industries such as life sciences, robotics, product development, etc.
For the 3D CAD elements of your role, you will primarily use SolidWorks. Familiarity with this tool would be advantageous, but we are open to considering other 3D CAD tools if you have a proven track record of quickly acquiring new skills.
When discussing complex problems, it would be beneficial if the Medical Devices you have worked on have involved fluidics, mechanism design, thermal issues, FEA, or other intricate applications. We do not expect you to have experience in all of these areas; they are just a few examples of the challenges you may encounter.
This company is experiencing growth but remains at a size where your work will significantly impact the company's success and projects. Therefore, we are seeking a team player accustomed to collaborating with diverse individuals both within and outside of the organization.
While continually facing challenges, you will advance your skills at the forefront of the sector. In addition to this, you will receive an excellent starting salary, a bonus (typically around 20%, recently even higher), BUPA healthcare, a pension plan, a generous holiday allowance, and other outstanding benefits.
Salary will be commensurate with experience, and we welcome applications from candidates with a few years of industry experience to those with over twenty years of experience. Finding the right fit is more important to us than a specific number of years of experience.
It is expected that you hold a degree in addition to any industry experience. If you also possess a PhD, it would be welcomed but is not essential.
Interviews will be conducted as soon as a suitable candidate is identified. If you are interested in exploring this role, we recommend submitting your application and CV. Please note that your CV will not be forwarded to the company until after we have discussed the role and the company in detail.
For more information, please feel free to call Andrew Welsh, Director of Medical Devices Recruitment and Scientific Recruitment Specialist at Newton Colmore, at 0121 268 2240. Alternatively, you can submit an application, and a member of our Newton Colmore team will contact you.
Newton Colmore Consulting is a specialised recruitment company operating in the Medical Devices, Scientific Engineering, Scientific Software, Robotics, Data Science, Healthcare Communications, Science, Electronics Design, New Product Design, Human Factors, Regulatory Affairs, Quality Assurance, and Field Service Engineering sectors.....Read more...
Setting and operating a wide variety of conventional & CNC machines (typically milling, turning, grinding or millturn), in order to ensure that all parts are correctly machined in accordance with customer requirements and company quality specifications, therefore minimising scrap
Work to achieve set production times and targets
Interpreting drawings and quality specifications, in order to ensure parts are produced to customer requirements and company quality specifications
Designing and producing mandrels, jigs and fixtures, where applicable, in order to assist with production requirements
Following Operation Sheets, in order to ensure part is progressed through the factory on time and on the correct pathway
Carrying out quality checks on own work using measuring equipment such as micrometers, verniers, gauges etc, in order to ensure the part is produced to drawing specification
Carrying out daily and weekly TPM checks, in order to ensure machine and equipment is correctly maintained and to minimise breakdowns
Fully skilled machinists will also be responsible for training, mentoring and inducting less experienced Machine Operators, assisting them with resolving machining issues, to ensure optimum productivity and to promote good employee relations
Setting and operating the following machines:
Jones and Shipman CNC/Manual Grinders
Surface Grinders
Must be able to set and program at least one of the above machines
Flexibility required in relation to operating more than one machine
Work to achieve set production times and targets
Designing and producing mandrels, jigs and fixtures, where applicable, in order to assist with production requirements
Following Operation Sheets, in order to ensure parts are progressed through the factory on time and on the correct pathway
4 Axis CNC
Flexibility required in relation to operating more than one machine
Work to achieve set production times and targets
Designing and producing mandrels, jigs and fixtures, where applicable, in order to assist with production requirements
Following Operation Sheets, in order to ensure parts are progressed through the factory on time and on the correct pathway
Carrying out quality checks on own work using measuring equipment such as micrometers, verniers, gauges etc., in order to ensure the part is produced to drawing specification
Training:An apprenticeship allows you to earn a wage, gain valuable work experience and industry specific competence. You will beexpected to work towards the Machining Technician Level 3, with support from your employer and the Chesterfield College Group.
Training and training location to be confirmed.Training Outcome:Potentially full-time employment on successfully completing the apprenticeship.Employer Description:From our state-of-the-art manufacturing facility in Pinxton, Nottinghamshire, Nasmyth Bulwell offer cutting-edge technology and bespoke engineering solutions, accompanied by a wealth of knowledge gathered from over 60 years in the industry. Today Nasmyth Bulwell provides high quality, uniquely integrated precision engineering and manufacturing solutions for the global aerospace and allied industries supported by our forward-thinking approach we have developed our global supply chain infrastructure, offering low-cost sourcing solutions worldwide.Working Hours :Monday - Thursday 8.00am - 5.00pm and Friday 8.00am - 11.30am.Skills: Communication skills,Attention to detail,Organisation skills,Problem solving skills,Number skills,Logical,Team working,Creative,Initiative,Patience....Read more...
As a business owned by its employees, they share success, think long-term, and balance commercial goals with social purpose.During this apprenticeship you will be working alongside experienced engineers, you will gain hands-on experience, learn core engineering principles, and support maintenance and engineering projects across site.
Your Key Responsibilities:
Complete a structured apprenticeship programme (on-the-job training and formal study)
Support maintenance, inspection and repair of mechanical, electrical and control systems
Assist with fault finding and problem-solving on equipment
Work safely at height and with manual handling where required
Follow health & safety procedures and maintain high housekeeping (5S) standards
Keep accurate maintenance records and support continuous improvement
Diversity & Inclusion:
The companies aim is to create an environment that is welcoming to all people and ensures people treat each other and customers with respect
They appreciate different and fresh ways of thinking, encouraging innovation where colleagues feel they can express their views freely, and create a working atmosphere in which everyone is able to deliver a high-quality service
To be successful in this role:
You will need to have a practical, hands-on approach with good problem-solving skills
An eagerness to learn and develop technical skills
A strong awareness of health & safety
You will need to be aged 18+ (due to site safety requirements)
Training:
Level 3 Mechatronics Maintenance Technician
Level 2 Functional Skills in English and maths if required
Training Outcome:
Full time position on completion of your apprenticeship
Employer Description:Scott Bader is an employee-owned global manufacturer of advanced composites, structural adhesives and functional polymers. Established in 1921, we have a century of expertise in manufacturing high-quality, innovative products for a variety of markets around the world. Scott Bader now employs 800 people across 7 manufacturing sites and 18 offices worldwide. Scott Bader is committed to expanding its global reach, with recent ventures including North America, India, Japan and Australia, while continuing to build on its reputation for innovation, outstanding quality and technical expertise.Scott Bader is different to most other companies. Our business is based on the simple principle of maintaining a balance between our social purpose and business needs. In 1951 we became the first UK company to hold a Common Ownership Certificate when the Bader family handed over their shares to the Scott Bader Commonwealth Ltd – in simple terms, this means that Scott Bader colleagues own and are responsible for the success and overall wellbeing of the company.Diversity & InclusionOur aim is to create an environment that is welcoming to all people, and ensures we treat each other and customers with respect. We appreciate different and fresh ways of thinking, encouraging innovation where colleagues feel they can express their views freely, and create a working atmosphere in which everyone is able to deliver a high-quality service.Working Hours :Monday - Friday, 8.00am - 4.00pmSkills: communication skills,Attention to detail,Problem solving skills,Team player....Read more...
Provide general administrative support, including answering telephones, managing incoming queries, scanning, printing, filing, and document handling
Create, maintain, and improve structured filing systems for legal documentation, both digital and physical
Review and amend contracts such as (but not limited to) non-disclosure agreements with the relevant training provided
Produce relevant documents, correspondence, meeting notes and presentations using Microsoft Office tools
Draft correspondence relevant to legal matters as requested by the team
Proofread legal and corporate documents for accuracy in spelling, consistency, and clarity
Assist with diary coordination and meeting preparation
Communicate professionally with internal colleagues and, where appropriate, external parties such as clients, financial institutions, regulators, and public notaries
Assist with research tasks in support of legal queries, projects, or audits
Provide flexible, ad hoc support to the Legal team and assist with cross‑functional tasks when required
Handle confidential and sensitive information in accordance with GDPR, the Data Protection Act, and internal policies
Demonstrate initiative, sound judgement, and the ability to manage competing priorities in a calm and organised manner
Training:An apprenticeship allows you to earn a wage, gain valuable work experience and industry specific competence. You will be expected to work towards the L3 Business Administration Apprenticeship, with support from your employer and the Chesterfield College Group.Training Outcome:AESSEAL PLC are a forward‑thinking and supportive employer who aim to offer ongoing opportunities for apprentices after their programme, depending on business needs and individual performance.Employer Description:AESSEAL PLC is a global engineering company based in Rotherham, best known for making mechanical seals and support systems that help keep machinery running safely and reliably in lots of different industries, from cars and chemicals to food production and marine equipment. [pitchbook.com]
The company started in 1979 and has grown massively over the years. Today, AESSEAL has nearly 2,000 employees and supplies customers in more than 100 countries, making it one of the world leaders in its field. [rothbiz.co.uk]
AESSEAL is known for being innovative and environmentally focused, using advanced technology to help reduce energy and water use and to improve the way equipment runs. They aim to give excellent customer service and are always looking for ways to improve and stay ahead in the industry. [aesseal.com]
One exciting part of the company is their impressive Factory for the Future in Rotherham. It’s a modern, eco‑friendly facility designed to support sustainable manufacturing, and it’s been described as a “temple of innovation.” It also reflects AESSEAL’s commitment to creating high‑quality local jobs and investing long‑term in the area. [rothbiz.co.uk]
For students and apprentices, AESSEAL offers a forward‑thinking, supportive environment, with lots of opportunities to learn, grow, and be part of a company that’s making a real impact in engineering and sustainability worldwide.Working Hours :Monday - Friday 9.00am - 5.00pm.Skills: Communication skills,IT skills,Attention to detail,Organisation skills,Customer care skills,Problem solving skills,Presentation skills,Administrative skills,Analytical skills,Logical,Team working,Creative,Initiative,Non judgemental....Read more...
Blended learning, including interactive workshops, monthly 1:1 sessions, personalised coaching and tutor support
The programme is designed to help learners build the skills to solve real business problems and create AI-powered solutions
Apprentices will develop knowledge of AI concepts, tools, platforms, data analysis, model building, automation, prompt engineering and responsible AI practice
Training:Artificial Intelligence (AI) and Automation Practitioner Level 4.
Course content includes:
Introduction to AI and Machine Learning
Data Collection, Preparation and Analysis
AI Model Building and Evaluation
Prompt Engineering and Generative AI
Responsible AI, Ethics and Bias
AI Tools, Platforms and Automation
Visualising Data and Communicating Insights
Real World AI Projects and Problem Solving
Learners will also gain skills in:
Understanding AI concepts, technologies and applications
Collecting, preparing and analysing data responsibly
Building, testing and evaluating AI models and solutions
Working with AI tools, platforms and programming languages
Applying AI ethically in line with governance and regulations
Communicating insights and creating value through AI solutions
Continuously improving AI systems and ways of working
Support included:
Live online workshops via Microsoft Teams
Monthly 1:1 coaching and progress reviews
Dedicated tutor and apprentice support
Flexible learning alongside the learner’s day to day role
Access to resources, tools and career development support
End Point Assessment:
At the end of the apprenticeship, learners complete an End Point Assessment to confirm occupational competence. This includes a work based project where they apply their knowledge and skills to a real business challenge within their organisation. There are also one additional EPA activity chosen by the learner and employer from the options provided by the assessment organisation
Candidate requirements:
This programme is best suited to candidates who already have previous project management experience and are now looking to change career or move into the AI space. The ideal learner should be comfortable managing projects, working with stakeholders, solving business problems and applying structured thinking to real workplace challenges.
They do not need to already be an AI expert, but they should have a strong interest in AI, data, automation and digital transformation, with the ambition to develop practical AI skills that can be applied within a care sector environment.
The apprenticeship would be a strong fit for someone looking to use their existing project management background as a foundation to progress into AI-focused roles, AI implementation, digital transformation, automation or AI project delivery.Training Outcome:Full career progression available.Employer Description:We are a care provision with supported living and agency and training companyWorking Hours :Monday - Friday, 9.00am - 5.00pmSkills: Communication skills,IT skills,Attention to detail,Organisation skills,Customer care skills,Presentation skills,Administrative skills,Logical,Team working,Creative,Initiative,Patience....Read more...
With the guidance of the senior leadership team you will support the business unit in the following:
Coordination of meetings/ BU calendar
Preparation of BU reports
Preparation of presentations
Maintaining and controlling records/documents
Liaising with projects/bid teams on submissions and reporting to the business unit
Organising of BU events
We develop and support our people's success from the start to the end of your career at BAM.
You'll receive your apprenticeship training for Level 3 Business Administration which will take place remotely via online training sessions and 1-1s with a learning coach.
Alongside this you will be receive other ongoing training through our BAM connect system as well as being exposed to the many professional development opportunities open to you in the industry.
You’ll also have access to BAM’s online learning platform, BAM Connect, which supports your ongoing development by keeping you informed about company policies, procedures, and industry regulations relevant to your role.
Previous apprentices have gone on to diversify their knowledge and experience in other roles within BAM.Training:
Training will be delivered remotely on MS Teams by our training partner Learning Skills Partnership
You will be assigned a tutor who will carry out regular reviews throughout your apprenticeship
Training Outcome:
We develop and support our people's success from the start to the end of your career at BAM
Alongside your apprenticeship you will be receive other ongoing training through our BAM connect system as well as being exposed to the many professional development opportunities open to you in the industry
On completion of your apprenticeship we will review options with you for further training
Employer Description:At BAM we imagine, create, and enrich buildings and infrastructure across the UK & Ireland. For over 150 years, we have dedicated ourselves to enhancing lives by creating sustainable environments and communities where people can live, work, and thrive.
Our vision is to build a sustainable tomorrow and that is why we think beyond the build and focus on the bigger impact. It is how we make the iconic buildings and infrastructure that shape our society working collaboratively with our partners. We have 6500 employees and work in Construction, Civil Engineering, Ground Engineering, Energy, Property Development, Facilities Management and Site Solutions.
When you work at BAM, safety is unconditional. It comes before profit. We take responsibility for ourselves and each other, and towards society at large. Onsite, on the road, at home and at the office.
Don’t just take our word for it, we’re an award-winning company too, for a third year in a row we are positioned in the Rate My Apprenticeship Top 100! Employers to work for.Working Hours :Monday - Friday, 9.00am - 5.00pm (one hour lunch)Skills: Communication skills,IT skills,Attention to detail,Organisation skills,Administrative skills,Team working,Initiative....Read more...
Your duties will include:
Client, CRM & Data Insight:
Develop and maintain a Client Grading system (A/B/C) and client segmentation (industry, location, spend)
Monitor CRM systems (HubSpot & JobLogic) to identify inactive leads and trigger follow-up actions
Maintain live trackers for project assets such as photos and testimonials, filling gaps through follow-ups or site visits
Client Engagement & Retention:
Create re-engagement campaigns for dormant clients using CRM data
Request Google reviews and convert feedback into testimonials and marketing content
Support development of case studies across active projects
Follow up proposals and quotations
Networking & Relationship Management
Track and follow up networking connections:
Attend and support networking meetings to promote business services
Ensure new contacts are logged and followed up, including LinkedIn connection management
Support internal teams with ongoing relationship development
Projects, Reporting & Insight:
Support creation of client summary reports covering energy, carbon, water usage, and testimonials
Sit in on project surveys and summarise insights for internal use
Provide administrative support to Project & Service Managers on larger opportunities
CSR (Corporate Social Responsibility)
Support charity relationship management (e.g. Scottie’s Little Soldiers & Community of Purpose), including tracking engagement and communications
Engineering & Operations Support:
Manage engineer schedules, holidays, and compliance using Joblogic CRM
Maintain Engineers Matrix (training, logistics, cost tracking)
Oversee vehicle compliance (servicing, MOTs, tyres)
Support apprentice engineers with college coordination and progression tracking
Ensure PPE and uniform stock levels are maintained
Support wellbeing initiatives across teams Office, HR & Compliance
Assist with Health & Safety compliance and Citation reviews
Produce monthly audits and risk assessments to support compliance monitoring
Maintain subcontractor, supplier, and customer onboarding records
Support office operations including supplies, organisation, and day-to-day administration
Training Outcome:
This role could lead to a career within adminsitration or the engineering sector
Employer Description:UES was founded in 1986 by mechanical engineer Roger Griffiths, specialising primarily in Warm Air Heating. The business has since expanded into all modern aspects of Mechanical, Electrical, and Renewable services.
Our client base spans the South West and South Wales, covering sectors including sports and leisure, retail, transport, healthcare, education, and places of worship.
We remain a family-run business with a strong focus on long-term client relationships and high-quality customer service. Our team of highly qualified engineers delivers tailored, reliable mechanical building services including design, installation, maintenance, and facilities support.
We continue to evolve with the industry while maintaining our core values of service, reliability, and long-term partnership working.Working Hours :Monday - Friday, 8.00am - 5.00pm.Skills: Communication skills,IT skills,Attention to detail,Organisation skills,Customer care skills,Administrative skills....Read more...
We are looking for an enthusiastic Data Science Engineer to join our team specialising in Engineering for our Cummins Somponents & Software in Huddersfield, West Yorkshire.
During your apprenticeship with us, you will learn how a major global organisation operates, gaining the tools and exposure you will need to become an expert in the industry and power your potential!
In this role, you will make an impact in the following ways:
Extraction, interpretation and presentation of emerging data
Development of Power BI reports to showcase patterns, trends and issues
Use of accumulated data to develop machine learning models for improved future accuracy
Collaboration with wider Performance, Analysis and Advanced Engineering teams to support machine learning initiatives and explorations
Support communication with global stakeholders, presenting learnings and insights
Autonomous, enthusiastic, proactive and self-motivated with good communication skills, an enjoyment of problem-solving and keenness in looking for innovative solutions
To be successful in this role you will need the following:
3 A-levels (or equivalent) : grade C or above (A level in Computer Science or IT is desirable)
GCSEs including Math’s/Science at Grade 5/B, 4 other subjects at 4/C or above.
Minimum 104 UCAS points are needed, this is essential
A genuine interest in Data Science or related fields.
Must have been a UK resident/citizen for 3 years or above
Why Cummins
As an apprentice at Cummins, you will have the chance to develop your skills and knowledge in a supportive and dynamic environment. Our program is designed to provide a comprehensive learning experience that prepares you for a successful career in the industry.Training:This 36-42 month Level 6 Data Scientist Apprenticeship gives learners essential skills to succeed in a modern data-driven workplace. Developing a powerful combination of statistical analysis techniques, programming skills and domain expertise, unlocking meaningful insights from complex datasets and driving impactful, data-driven decisions within an organisation.
Apprentices attend weekly learning sessions and build a professional portfolio, showcasing workplace examples that evidence key knowledge, skills and behaviours (KSBs). Learners will have the opportunity to participate in industry masterclasses and professional development, enhancing their knowledge and skills beyond the apprenticeship. By completion, learners will be fully prepared for their Apprentice Assessment, equipped with practical experience to confidently demonstrate their abilities.Training Outcome:Possibility of a potential permanent employment through open vacancies.Employer Description:Cummins Turbo Technologies is the only manufacturer focused solely on medium- to heavy-duty diesel engine turbo technologies. For more than 60 years, we have delivered innovative, reliable turbocharger solutions for our customers. Our vision for turbocharger solutions, thanks to our rich company heritage derived from our Holset® brand, sets us apart as a technology leader.Working Hours :During the apprenticeship, you will work 5 days per week, inclusive of 1 day per week for study at University Academy 92 (UA92) in Manchester. The working hours are 37.5h/w, 8:30am - 4:30pm core hours, with flexibility to suit business needs.Skills: Communication skills,IT skills,Attention to detail,Organisation skills,Problem solving skills,Presentation skills,Number skills,Analytical skills,Logical,Initiative,Patience....Read more...
Manufacturing & Production:
Assist in the manufacture and fabrication of plastic products to customer specifications.
Support the operation and monitoring of machinery (full training provided).
Manufacture coiled pipe and related plastic fabrication products.
Work with HDPE pipe and sheet materials to produce manifolds, chambers, and associated products.
Learn and perform plastic welding techniques in accordance with issued drawings (training provided).
Read and interpret CAD drawings where required.
Assist with stock organisation and material control within the fabrication department.
Conduct routine tool and equipment inspections.
Support general site maintenance activities.
Participate in team meetings and continuous improvement initiatives.
Contribute to Lean Manufacturing activities and identify waste reduction opportunities.
Attend training sessions such as Tool Box Talks and Lean Manufacturing workshops.
Comply fully with ISO 9001 processes for design, manufacturing, and testing.
Warehouse & Logistics:
Perform daily stock and warehouse tasks to support smooth site operations.
Assist in maintaining warehouse areas in line with Lean Manufacturing and 5S principles.
Load and unload goods using a forklift truck (training provided where required).
Coordinate goods-in arrangements and inspect incoming deliveries.
Pick, pack, wrap, and prepare customer orders for dispatch.
Coordinate with logistics providers to book appropriate transport for customer deliveries.
Monitor stock levels and report discrepancies or shortages to management.
Assist with annual stock takes and ongoing inventory control.
Replenish warehouse stock in the most cost-effective manner.
Ensure OTIF (On Time In Full) performance remains at or above the company target of 95%.
Liaise professionally with the Sales team to ensure customer satisfaction.
Complete and file all required paperwork in compliance with ISO 9001 procedures.
Record quality issues (supplier, customer, internal) using Asana.
Monitor tools and equipment wear in warehousing areas and recommend efficiency improvements.
Assist with maintenance, inspection, and cleaning of pool cars and vans.
Maintain a safe, clean, and organised warehouse environment at all times.
Health, Safety & Compliance:
Understand and comply with the company’s Health, Safety and Environment Policy.
Set a personal example in maintaining high safety standards.
Ensure work areas are safe, tidy, and compliant at the end of each shift.
Complete weekly Health & Safety inspections as required.
Maintain quality service by complying with company standards, procedures, rules, and regulations.
Training:
The learner will be studying the Engineering Operative Level 2 Apprenticeship Standard qualification.
Day release to West Suffolk College.
Training Outcome:We are seeking a candidate that wants to come on board for a longer-term career with us. Therefore, the suitable apprentice would hopefully remain full time once the apprenticeship finishes.Employer Description:We supply specialist products for use in areas including construction, civil engineering, renewable energy, landfill and rail.Working Hours :Monday-Friday (08:00-16:30).Skills: Communication skills,Organisation skills,Team working,Problem solving skills,Initiative....Read more...
About the role:
As a Laboratory Technician Apprentice, you will support the day‑to‑day work of the laboratory, assisting with testing, preparing samples and maintaining a clean and safe working environment. You will be trained and supported throughout the apprenticeship.This is an exciting opportunity to develop technical skills that support major construction and infrastructure projects across the UK. You'll learn how to test soils, aggregates, concrete, and other construction materials to help engineers make informed decisions about the safety and performance of buildings, roads, and infrastructure. What You'll Be Doing.
Working alongside experienced technicians, you will:
Prepare soil, aggregate, rock and concrete samples for testing
Carry out moisture content, density, grading, and particle size tests
Assist with sieve analysis and material classification testing
Record and analyse laboratory results
Operate specialist testing equipment
Assist with equipment calibration and maintenance
Follow British Standards and laboratory procedures
Support ISO quality management requirements
Maintain accurate test records and reports
Follow health and safety procedures at all times
What We're Looking For:
Interest in science, engineering, geology, or construction
Strong attention to detail
Practical and hands-on approach
Good communication and teamwork skills
Basic IT and numerical skills
Ability to follow procedures accurately
Positive attitude and willingness to learn
Training & Development:You will complete a nationally recognised qualification: Level 3 Laboratory Technician Apprenticeship.You'll gain experience in:
Soil Testing
Aggregate Testing
Concrete Testing
Rock Testing
Construction Quality Assurance
Laboratory Operations
Career Progression.
Upon completion, opportunities may include:
Geotechnical Laboratory Technician
Materials Testing Technician
Site Investigation Technician
Engineering Technician
Higher Level Apprenticeships
Construction Materials Specialist
Why Join Us? ✅ Earn while you learn ✅ Gain industry-recognised qualifications ✅ Work on projects that shape the built environment ✅ Develop highly sought-after technical skills ✅ Clear progression opportunities within the testing industryTraining:Laboratory Technician Level 3.Training Outcome:Because of the technical experience you will gain from working in a laboratory, you will gain skills which many graduates have yet to develop. If you have practical ability, ability to solve problems and good communication skills there are opportunities for progression towards higher qualifications.Employer Description:Our reputation is built on our commitment to prompt professional, personal service and attention to detail, which is reflected in the services we offer and the time we take to get to know our clientele and how to best service their needs.Working Hours :Monday - Friday 9.00am - 5.00pm.Skills: Attention to detail,Communication skills,Customer care skills,Initiative,Non judgemental,Organisation skills,Patience,Team working....Read more...
Mobile Plant Fitter
Hours: 40 per week (MondayFriday)
Salary: £42,000 £49,000 DOE + van & D2D pay
Employment Type: Full-time, Permanent
An established plant hire company is seeking a skilled Mobile Plant Fitter to join their busy team. This role offers consistent weekday hours with overtime available and the chance to work on a variety of heavy plant machinery in a professional and supportive setting.
Main Duties:
- Service, maintain, and repair heavy plant equipment, including excavators, dozers, dumpers, and diggers.
- Identify mechanical, hydraulic, and electrical faults and carry out timely repairs.
- Accurately complete job cards, service records, and associated documentation.
- Work independently on-site or collaboratively within the workshop team.
Candidate Requirements:
- Proven experience as a Plant Fitter, Heavy Plant Engineer, or Plant Mechanic.
- Strong understanding of hydraulics, diesel engines, and electrical systems.
- NVQ/City & Guilds Level 3 in Mechanical, Plant, or Agricultural Engineering, or equivalent experience.
- Confident fault diagnosis and problem-solving skills.
- Full UK driving licence.
Benefits:
- MondayFriday, 40-hour workweek
- Paid overtime opportunities
- Ongoing training and professional development
- Company van with fuel card and paid travel
- Secure long-term position with a reputable plant hire company
Please hit apply or reach out to Pete for further information - 07485986178 / peter@holtautomotive.co.uk....Read more...
We’re supporting a global engineering and technology business with the hire of an IT Support Administrator.
This is a hands-on first and second-line support role covering user support, Microsoft 365, Active Directory, Azure, devices, security controls and general IT administration.
Responsibilities
Provide onsite and remote IT support
Administer Active Directory, users, permissions and Group Policy
Set up laptops, desktops and mobile devices
Support Microsoft 365, Azure and business applications
Troubleshoot hardware, software and network issues
Maintain IT assets, licences and documentation
Support MFA, endpoint protection, patching and encryption
Work with MSPs and external vendors
Support onboarding, offboarding and IT projects
Requirements
First and second-line IT support experience
Strong Microsoft 365, Active Directory and cloud knowledge
Good troubleshooting skills across hardware, software and networks
Clear communication and user support skills
Strong attention to detail and security awareness
Useful
SAP or ERP experience
MSP experience
Microsoft, CompTIA A+, Network+ or Security+ certifications
Cyber Essentials or ISO 27001 exposure
....Read more...
Multi‑Skilled Maintenance Engineer (Electrical Bias)
Stevenage, Hertfordshire £51,759 | 4 on 4 off (Days & Nights – 7am–7pm)
We are recruiting 2x Electrically Biased Multi‑Skilled Maintenance Engineers to join a growing FMCG bakery site due to expansion.
The Role:
Electrical fault finding on FMCG machinery
Working with Siemens PLCs, inverters, motors, control panels
Maintenance on ovens, mixers, packaging machines, pumps & conveyors
PPMs and breakdown support
Requirements:
Strong electrical bias (must pass electrical test)
NVQ / BTEC / C&G Level 3 (or equivalent)
FMCG or transferable industrial experience
Multi‑skilled (mechanical skills beneficial)
Interview Process: Electrical test & technical chat Site tour and meeting with Engineering Manager
Benefits: Excellent holiday allowance, enhanced pension (up to 10%), discounted products, subsidised canteen, healthcare discounts, cycle to work, free parking, EAP & more.
CVs reviewed directly by the Maintenance Manager.
....Read more...
Due to organic growth, we are recruiting for a Production Supervisor to join this well-established manufacturing organisation. The company is based at the heart of Worksop, Nottinghamshire offering easy access from surrounding towns and cities such as Chesterfield, Doncaster, Dronfield, Mansfield, Rotherham and Sheffield. Working Hours of the Production Supervisor :
Days Only Monday to Friday 8am to 4pm.
In return, the successful Production Supervisor will receive:
DOE , Full package £45,000-£50,000 per Annum.
Private Health Care.
Holidays/Pension Scheme.
Ongoing development and training.
Ideally, the successful Production Supervisor will have :
Managerial/Engineering qualifications.
Health and Safety qualification.
Leading/managing production teams.
Experience in reviewing performances/training needs.
Overseeing a section of a manufacturing plant.
E3R are keen to see applications from candidates with experience as Production Supervisors who have experience in managing and controlling plant facilities and ensuring optimum efficiencies.To apply for this Production Supervisor , please click "Apply Now" and attach your most up-to date CV.
....Read more...
Mobile Plant Fitter
Hours: 40 per week (MondayFriday)
Salary: £42,000 £49,000 DOE + van & D2D pay
Employment Type: Full-time, Permanent
An established plant hire company is seeking a skilled Mobile Plant Fitter to join their busy team. This role offers consistent weekday hours with overtime available and the chance to work on a variety of heavy plant machinery in a professional and supportive setting.
Main Duties:
- Service, maintain, and repair heavy plant equipment, including excavators, dozers, dumpers, and diggers.
- Identify mechanical, hydraulic, and electrical faults and carry out timely repairs.
- Accurately complete job cards, service records, and associated documentation.
- Work independently on-site or collaboratively within the workshop team.
Candidate Requirements:
- Proven experience as a Plant Fitter, Heavy Plant Engineer, or Plant Mechanic.
- Strong understanding of hydraulics, diesel engines, and electrical systems.
- NVQ/City & Guilds Level 3 in Mechanical, Plant, or Agricultural Engineering, or equivalent experience.
- Confident fault diagnosis and problem-solving skills.
- Full UK driving licence.
Benefits:
- MondayFriday, 40-hour workweek
- Paid overtime opportunities
- Ongoing training and professional development
- Company van with fuel card and paid travel
- Secure long-term position with a reputable plant hire company
Please hit apply or reach out to Pete for further information - 07485986178 / peter@holtautomotive.co.uk....Read more...
Role: Mobile Agricultural Engineer
Salary: £45,000 -£50,000
Location: Stratford-upon-Avon
Rota: Monday to Friday
We're working with a well-established machinery business that is looking to add an experienced Agricultural Engineer to its growing team.
The Role
As an Agricultural Engineer, you will be responsible for the servicing, maintenance and repair of a wide range of agricultural machinery across your designated region.
Your responsibilities will include:
Servicing, maintenance and repair of agricultural machinery and equipment.
Diagnosing and repairing mechanical, hydraulic and electrical faults.
Carrying out planned maintenance and breakdown repairs.
Providing technical support and advice to customers.
Completing service reports and associated paperwork accurately.
Maintaining a professional and customer-focused approach whilst representing the business.
What We\'re Looking For
Previous experience as an Agricultural Engineer, Plant Engineer, HGV Engineer or similar.
Strong fault-finding and diagnostic skills.
Experience working on tractors, combines, harvesters or related agricultural equipment.
NVQ Level 3 in Land Based Engineering, Plant Maintenance or equivalent (preferred).
Full UK Driving Licence.
Self-motivated engineer with the ability to work independently.
What\'s On Offer
£45,000 - £50,000 OTE.
Fully equipped company van.
Fuel card.
Company phone and laptop.
Ongoing manufacturer and product training.
Interested? Call Matt on 07739 277676 or email matt@holtautomotive.co.uk or apply with your up to date CV.
....Read more...
Role: Mobile Agricultural Engineer
Salary: £50,000 -£60,000
Location: Worfield
Rota: Monday to Friday
We're working with a well-established machinery business that is looking to add an experienced Agricultural Engineer to its growing team.
The Role
As an Agricultural Engineer, you will be responsible for the servicing, maintenance and repair of a wide range of agricultural machinery across your designated region.
Your responsibilities will include:
Servicing, maintenance and repair of agricultural machinery and equipment.
Diagnosing and repairing mechanical, hydraulic and electrical faults.
Carrying out planned maintenance and breakdown repairs.
Providing technical support and advice to customers.
Completing service reports and associated paperwork accurately.
Maintaining a professional and customer-focused approach whilst representing the business.
What We\'re Looking For:
Previous experience as an Agricultural Engineer, Plant Engineer, HGV Engineer or similar.
Strong fault-finding and diagnostic skills.
Experience working on tractors, combines, harvesters or related agricultural equipment.
NVQ Level 3 in Land Based Engineering, Plant Maintenance or equivalent (preferred).
Full UK Driving Licence.
Self-motivated engineer with the ability to work independently.
What\'s On Offer:
Fully equipped company van.
Fuel card.
Company phone and laptop.
Ongoing manufacturer and product training.
Interested? Call Matt on 07739 277676 or email matt@holtautomotive.co.uk or apply with your up to date CV.
....Read more...
Assisting in the preparation of Civil & Structural Engineer design and drawing works for a wide variety of construction projects.Training:Civil Engineer Level 6.
Day release one day a week at UWE, Filton, Bristol (providing your own transport).
Training Outcome:Starting as a Civil or Structural Technician working towards becoming a competent Engineer within the 5 years.Employer Description:We are a well establish Civil & Structural Engineering Consultancy based in Gloucester (south). The practice is close to the M5 (J12) and 30 minutes commute from north Bristol. We provide services to a wide range of industries including residential, education, commercial, leisure and industrial. We have a team of senior staff, engineers and technicians working on projects up to construction values of £30m We pride ourselves on providing a quality service to our customers and clientsWorking Hours :Monday to Thursday 8.30am to 5pm, Friday 8.30am to 4.15pmSkills: Communication skills,Attention to detail,Organisation skills,Number skills,Team working....Read more...
This role is ideal for someone who enjoys practical work.
Duties will include:
Problem‑solving
Learning how modern industrial automation systems are designed, built, installed and commissioned
Work will be conducted under the guidance of experienced engineers while completing a recognised apprenticeship programme
Training Outcome:
A full time role will be discussed on successful completion of the apprenticeship
Employer Description:Diverse Controls Ltd specialises in the design, manufacture, integration and commissioning of electrical control systems for industrial and commercial applications. Based in Stroud, the company delivers high‑quality control panels and automation solutions, covering everything from bespoke system design and panel build to PLC integration, on‑site installation and full commissioning. With a focus on reliability, compliance and tailored engineering, Diverse Controls provides robust, efficient control systems built around each client’s operational needs.Working Hours :Normal hours of work are from 08:00 to 16:30, Monday to Friday, this constitutes a 40-hour basic week.Skills: Communication skills,Attention to detail,Organisation skills,Customer care skills,Problem solving skills,Logical,Team working,Initiative....Read more...
Observe daily maintenance of:
Packaging machines
Retail machines, including labellers, pneumatics, nitrogen equipment, air blasts, and steam cookers
Vacuum packing machines, vacuum pumps, and film over-wrapping machines
Learn the basics of maintaining and servicing temperature control equipment
Observe breakdown responses and learn how problems are diagnosed and resolved to maintain production flow
Training:
The learner will be studying the Engineering Maintenance Technician - Dual discipline Level 3 Apprenticeship Standard qualification
Day release to West Suffolk College
Training Outcome:Opportunity of a full time role on completion of the apprenticeship.Employer Description:Sofina Foods in Haverhill is a meat processing plant, operating a low risk processing area and high risk slicing area. It operates in a fast-paced environment with a strong focus on food safety, hygiene, and quality standards across all stages of production.Working Hours :Monday - Friday, 08:00 - 16:00.Skills: Communication skills,Attention to detail,Organisation skills,Team working,Initiative....Read more...
Design of electrical equipment and installations using the latest CAD tools
Attend customer sites to participate in site survey, installation and commissioning
Training:Training will take place both on the job at our office in Salford Quays and at Nottingham University on a block release basis.Training Outcome:On completion of Apprenticeship, apprentices are expected to progress to a full-time role in either our applications engineering team, customer service team or project management.Employer Description:Innomotics is a leading supplier of drive system products and solutons with over 100 years heritage. In the UK, we deliver major projects at home and overseas uing products manufactured in our Innomotics factories in Europe, the USA and the Far East.Working Hours :We offer a flexible/hybrid working arrangement for office-based activities, 37.25hrs per week. We ring-fence 1 day per week for personal study.Skills: Communication skills,IT skills,Attention to detail,Organisation skills,Problem solving skills,Number skills,Logical,Team working,Initiative,Non judgemental....Read more...
Contract Senior Civil Infrastructure EngineerLondonImmediate StartLong term contractc£50-55 p/h (Inside IR35) Contract Senior Civil Infrastructure Engineer A Global multi discipline engineering consultancy based in Central London is looking to hire multiple Senior Civil Infrastructure Engineers on a contract basis due to a number of significant project wins. Our client has won a significant number of projects both in the UK and UAE and need expert help to deliver on these challenging and complex projects. Successful applicants must have excellent Infodrainage, AutoCAD and Civil 3D experience and be used to working on projects of significant scale. Previous experience of working on UAE projects would be a distinct advantage. Successful applicants will have a minimum of 5-8 years relevant experience. Any individual from a strong technical background in a core infrastructure disciplines such as Highways, Utilities or Sustainable Drainage would fit the role well. Our client can offer a hybrid work pattern and an hourly rate depending on experience between £50-55 p/h. Immediate start for the right individual. For more information on this role please contact Nick Rothery at Energi People.....Read more...
The team at Allsebrook Pumps are looking for an enthusiastic Apprentice Field Service Engineer to join them at their site near Witney. They’re a close‑knit group, and many of them started out as apprentices themselves, so they really understand what support you’ll need. They’re keen to share their skills and help you learn and grow in the role. This is a great chance to work with experienced engineers who genuinely want to pass on their knowledge.
Allsebrook Pumps works with all kinds of pumps and water systems. We install them, maintain them, repair them, and keep everything running smoothly.
After successfully supporting our last apprentice (who is now a fully qualified engineer with us), we’re excited to offer a new apprenticeship opportunity for someone ready to start their career.
We’re looking for someone who’s curious, motivated, and keen to learn. You’ll get hands‑on experience with everything from small domestic pumps to specialist systems. You’ll learn how to spot faults, develop strong troubleshooting skills, and build confidence in diagnosing and fixing equipment, all with the support and guidance of our experienced team.
If you’re ready to learn, grow, and become a skilled engineer, we’d love to hear from you.
Over the course of the apprenticeship, you will be supported to learn to:
Work across various responsibilities while strengthening the fundamental skills central to your role.
Check the day’s job schedule with your supervisor or lead engineer,
Gather required tools, equipment, and materials.
Support a qualified engineer with maintenance, repairs, diagnostics, and installations. Observe techniques and ask questions to build understanding of the role.
Carry out basic tasks independently under supervision. Assist with fault‑finding and troubleshooting, Help install, service, or repair equipment.
Travel as required, using the company van or designated transport, to attend call-outs and carry out service, maintenance, fault‑finding, repair and installation work on pumps and associated mechanical equipment.
Complete job reports online, upload photos of the work carried out, and provide a brief summary detailing all equipment used.
Use manuals if necessary for new equipment
Work as part of a team and independently
Engage positively with all parts of the apprenticeship, including all work required at college to complete qualifications
Training:The training for this apprenticeship will take place at Abingdon & Witney College on Abingdon Campus (OX14 1GG).
Duration:
13 months practical training period, plus 3 months for End Point Assessment
Delivery model:
Work-based training with your employer
Day release during term time (approximately 2 days a week for 1 year)
Regular meetings with your training coordinator to monitor progress and well-being
Apprentices will need to complete a minimum of 300 hours of off-the-job training during their apprenticeship
Qualifications included:
Level 2 Diploma in Engineering Operations (Skills)
Level 2 Certificate in Engineering Operations (Knowledge)
Level 2 Engineering Operative Apprenticeship
End Point Assessment:
Practical assessment
Professional discussion
Training Outcome:This is a permanent position, and although additional maths and English study will be required (if you don’t already have the Level 3 entry requirements) to progress to Level 3 Mechatronics Maintenance, you will not be required to complete the Level 3 qualification in order to progress within the organisation.Employer Description:Allsebrook Pumps is a specialist in the supply and installation, maintenance, commissioning and repairs of pumps and associated equipment for private, commercial and rail companies. Following the success of our last apprentice placement we are now in a position to provide an additional apprenticeship to learn to work on a range of pumps and equipment.
Testimonial from Pete (Joined Allsebrook Pumps as an apprentice in 2018)
I genuinely enjoy working for this company—the pay is not only very fair but is paired with great flexibility and meaningful personal rewards that make a real difference.
Even though we’re a small team where everyone is expected to step up and get the job done, it creates a strong sense of pride, especially because our efforts are truly recognised and celebrated by the customers we have and the team we work with.
The support within the team is fantastic; everyone brings something unique to the table, and there’s a real sense of collaboration and encouragement.
There are also excellent opportunities for career growth, making it easy to stay motivated and keep developing professionally. It’s not a rigid or restrictive environment—we focus on delivering results to the customer, and that shared mindset has helped us build and maintain a strong, well-respected reputation.Working Hours :Monday to Friday
08:30- 16:30.Skills: Communication skills,IT skills,Attention to detail,Customer care skills,Problem solving skills,Team working,Initiative,Interest in mechanical systems,Working to deadlines,Remaining calm under pressure,Working to high standards,Demonstrate company ethos,Awareness of Health and Safety....Read more...
An exciting opportunity has arisen for a Facilities Shift Technician, based in the Oldham, Manchester area. You will be joining this world leading high technology engineering company.
They are seeking a Facilities Shift Technician based in Oldham, Manchester to provide support to the Facilities department and production team within a cleanroom manufacturing environment.
The Facilities Shift Technician based in Oldham, Manchester would be working a shift position working a continental shift pattern of 2 on / 2 off / 3 on / 2 off, 2 on / 3 off. This would be on a rotating of days and nights.
The ideal candidate for the Facilities Shift Technician based in Oldham, Manchester should have proven experience working on electro-mechanical preventative maintenance, modification and repair to plant and equipment. In addition to this you will be monitoring and maintaining Gas Detection and BMS systems as well as process cooling, compressed air, vacuum, bulk gas, effluent, heating and electrical systems.
Apply Now! For more information on the Facilities Shift Technician job based in the Manchester area, please send your CV to tdrew@redlinegroup.Com or contact Tom Drew on 01582 878814 quoting reference THD1372. Otherwise, we always welcome the opportunity to discuss other Maintenance jobs on 01582 878848.....Read more...
A job as a Microwave Filter Design Engineer is urgently required in Yeadon, West Yorkshire.
An exciting new job has arisen for a Microwave Filter Design Engineer, based in Yeadon, West Yorkshire to work for a world leader in the design and manufacture of custom RF, microwave and millimetre wave components and subsystems.
The Microwave Filter Design Engineer, located in Yeadon, West Yorkshire will be responsible leading the design, simulation, prototyping, tuning, verification and release of high-performance RF/microwave filters and filter-based subsystems.
The ideal Microwave Filter Design Engineer, based in Yeadon, West Yorkshire will have previous experience in:
Design and develop RF and microwave filters and related sub-systems
Use simulation and design tools to model, optimise and evaluate filter performance.
Support prototyping, build, tuning and test activities in the lab.
Carry out measurements using RF test equipment such as VNAs and other microwave laboratory equipment.
APPLY NOW! For the Microwave Filter Design Engineer job, located Yeadon, West Yorkshire by sending a cover letter and CV to TDrew@redlinegroup.Com or by calling Tom Drew on 01582 878848 / 07961158762 quoting ref. THD1384. Otherwise, we always welcome the opportunity to discuss other roles similar to RF Engineering jobs on 01582 878 848.....Read more...
