Tasks will vary day-to-day; you will be trained and entrusted to:
Plan and prepare for maintenance of engineered systems in the food and drink industry.
Perform first-line routine mechanical maintenance, including removing and replacing components, cleaning, lubrication, inspection, and fault finding.
Apply ‘best practice’ techniques, including condition monitoring and proactive maintenance.
Produce replacement components, using manual and machine processes.
Maintain fluid power systems.
Weld stainless steel and other materials used in food production equipment.
Perform first-line electrical maintenance, including testing, fault finding, repairing, and replacing components.
Commission and perform maintenance of instrumentation/process control systems.
Perform maintenance of programmable control systems.
Manage medium scale projects covering a variety of the skills outlined above.
Training:Level 3 Apprenticeship Standard - Food and Drink Maintenance Engineer:
OAL Level 3 Diploma in Food and Drink Maintenance Engineering
First Year: you will spend block term time at Bridgwater College, and the rest of the time will be on site learning on the job at site.
Second and Third Year: You will spend four days per week on site receiving in-house training and one day per week at college.Following completion of the Level 3 modules you will complete an End Point Assessment with an external verifier.
After you’ve successfully completed your apprenticeship, there is the opportunity to continue training and become a fully qualified Engineer.
Training Outcome:
Commitment and willingness to progress within the business.
Employer Description:Why should I join the family?
We are independent, British, and proud to be making the highest quality yogurts, desserts, and ice cream under the Yeo Valley brand and for many of the UK’s major retailers. Operating from four dairies and two logistics centres in Somerset and Devon, we employ over 1700 staff and produce more than 25% of the UK’s packaged yogurt.Working Hours :40 per week, Monday - Friday, with some flexibility required in the final year.Skills: Communication skills,Attention to detail,Organisation skills,Problem solving skills,Logical,Team working,Patience,Verbal and written English,Strong numeracy skills,Confident communication skills,Logical thinking,Good problem-solving skills,Willingness to progress,Excited by Engineering....Read more...
Throughout your apprenticeship you will engage with multiple aspects of nuclear engineering, including:
Consultancy
R&D
Site installation
Decommissioning
You will engage in design tasks using the skills and competencies you acquired in your first year at college. Your work will depend on the project needs, but the usual outputs you can expect to produce are:
Help create basic electrical and mechanical drawings (like layouts and simple schematics)
Support with calculations for cables, lighting, or simple mechanical systems
Put together straightforward equipment lists and specificationsHelp with documents that explain how systems work or how they should be installed
Assist the team with design tasks as needed to learn and build experience
We have various sites of operation around the UK. During college holidays, you will be given the opportunity for a placement at one of these sites, where you will be able to work under the supervision and guidance of our experienced engineers.
During these placements you will experience how equipment designed by NSG is installed, set to work and commissioned on a highly regulated site.Training:We have partnered with Waterside Training, WA9 1TW to offer our Engineering Apprenticeship Scheme. We share Waterside’s very high expectations and standards, and this ethos starts at the very beginning of your journey. You will spend the first year of your apprenticeship training at Waterside Training. Training Outcome:Work towards becoming a proficient engineer with access to professional growth opportunities and unrivalled benefits.Employer Description:We have been a trusted leader in the nuclear industry for over 40years. As a full turnkey solution provider to the nuclear industry’smost complex challenges, we deliver the expert knowledge andcapability needed to help our clients achieve their goals at everystage of the project.Working Hours :Your first year will be Monday - Friday, 9.00am - 4.30pm. Times for starting at NSG will be between 8.00am and 6.00pm and will be confirmed with you prior to starting!Skills: Communication skills,Attention to detail,Problem solving skills,Number skills,Analytical skills,Team working,Initiative,Patience....Read more...
Throughout your apprenticeship, you will engage with multiple aspects of nuclear engineering, including:
Consultancy.
R&D.
Site installation.
Decommissioning.
You will engage in design tasks using the skills and competencies you acquired in your first year at college. Your work will depend on the project needs, but the usual outputs you can expect to produce are:
Help create basic electrical and mechanical drawings (like layouts and simple schematics).
Support with calculations for cables, lighting, or simple mechanical systems.
Put together straightforward equipment lists and specifications.
Help with documents that explain how systems work or how they should be installed.
Assist the team with design tasks as needed to learn and build experience.
We have various sites of operation around the UK. During college holidays, you will be given the opportunity for a placement at one of these sites, where you will be able to work under the supervision and guidance of our experienced engineers. During these placements, you will experience how equipment designed by NSG is installed, set to work and commissioned on a highly regulated site.Training:We have partnered with Waterside Training, WA9 1TW to offer our Engineering Apprenticeship Scheme. We share Waterside’s very high expectations and standards, and this ethos starts at the very beginning of your journey. You will spend the first year of your apprenticeship training at Waterside Training. Training Outcome:Work towards becoming a proficient engineer with access to professional growth opportunities and unrivalled benefits.Employer Description:We have been a trusted leader in the nuclear industry for over 40 years. As a full turnkey solution provider to the nuclear industry’s most complex challenges, we deliver the expert knowledge and capability needed to help our clients achieve their goals at every stage of the project.Working Hours :Your first year will be Monday - Friday, 9 am - 4.30 pm
Times for starting at NSG will be between 8 am and 6 pm and will be confirmed with you prior to starting.Skills: Communication skills,Attention to detail,Organisation skills,Problem solving skills,Presentation skills,Analytical skills,Logical,Team working,Initiative....Read more...
The role of Apprentice Engineering Technician is to assist Krones Field Service Engineers in installing, commissioning, overhauling and fault-finding on a wide range of KRONES machinery. A customer facing role, that is field based requiring travel to customer premises as and when required and potentially at short notice.
Adhere to strict health and safety policies and procedures and being compliant at all times.
Assist with installation and commissioning of machines and production line upgrades.
Support diagnosis, elimination, and documentation of malfunctions.
Assist in overhauling of customer machines on site at various locations in the UK.
Carry out all aspects of the apprenticeship, including offsite classroom training and onsite practical learning.
Provide accurate reporting and feedback (service reports, timesheets, expenses in line with company policy).
Participate in preventive maintenance and system improvement activities.
Work with customer-specific guidelines and safety instructions.
Travel to and from sites using company vehicles.
Training:
Level 3 Mechatronics Engineering Apprenticeship.
Approx. 42 months (3.5 years).
Leads to a nationally recognised qualification as a Mechatronics Maintenance Technician.
Delivered in partnership with Training 2000. Attend college full time for 1 year then 1 day per week in years following.
Combination of off-the-job education (technical theory) and on-the-job practical application. Use of e-portfolio OneFile to be used to support evidence gathering.
Practical and theory training at Krones AG Neutraubling facility.
Periodic progress reviews conducted by Training 2000 to support qualification and independent review by Krones UK.
Training Outcome:This apprenticeship provides a solid foundation for progression into roles such as Field Service Engineer, Maintenance Technician, or Automation Specialist, with opportunities for international exposure and advanced technical training.Employer Description:Krones designs and implements complete lines for beverages and food, which cover each individual production process step starting from product and container production, filling and packaging all the way up to material flow and container recycling.Working Hours :Monday to Friday, 8am to 4.30pm.Skills: Attention to detail,Organisation skills,Customer care skills,Problem solving skills,Team working....Read more...
The applicant will work in a successful engineering practice, with a track record of training from apprentice level through to senior engineers / management level. You will be mentored by a strong team of senior engineers and report to a nominated training officer. You will be provided with structured, in-house, training and attend college one day a week. You will assist senior engineers with a variety of tasks, a summary of which is given below:
Produce tender information – assist with preparation of specifications, equipment schedules, drawings, and other information for tender packages.
Full electrical/mechanical design – assisting with electrical/mechanical design works and integration with coordination of services.
Design calculations – produce design calculations and completing analysis both manually and with the aid of software packages.
Deadlines – support the team with design/admin tasks while managing internal and external deadlines and keeping actions on track.
Liaise with engineers/technicians to gather information and communicate progress and next steps.
Assist Principal Engineers – assist principal engineers when required and provide electrical/mechanical design support.
Utilities – applying for and managing statutory application process.
Produce professional written outputs (emails, notes, schedules) and represent the business positively with external contacts.
Training:Day release at college.
Trafford & Stockport College Group - Stretford Campus.Training Outcome:The correct candidate can go far, there is no ceiling to personal development.Employer Description:TACE, part of the Contollo Group, is a specialist building-services consulting-engineering practice which serves the public and private sectors with a focus on education, sports facilities, and multi-unit accommodation. A long-standing reputation for high-quality design services and expertise in low and net zero carbon solutions, helping our clients achieve their Net Zero ambitions. Our engineers work collaboratively to understand client perspectives and deliver tailored, commercially sound solutions that align with their environmental and operational goals. Our growth is founded on attention to detail, commitment, and the expertise of our team, resulting in strong client relationships and high levels of repeat business.Working Hours :08:30 - 17:30, Monday - Thursday.
08:30 - 14:30, Friday.Skills: Communication skills,IT skills,Organisation skills,Initiative,Professional manner,Dependable,Ability to prioritise tasks,Ability to meet deadlines,Confident,Willing to learn,Confident using Microsoft 365....Read more...
Key responsibilities:
Assist in the resolution of technical faults and changes within the agreed service level agreements set out.
Progressing and escalating issues accordingly.
Keep accurate records in the service management system, making sure that customers always receive feedback on the progress of faults and changes.
Assist in the support, monitoring and development of internal IT Systems.
Maintain the accuracy of asset management software, cataloguing new, updated and retired devices.
Provide excellent customer service and be fully responsive to the needs of the customers and employers.
Work alongside third-party partners/providers either as part of the change implementation or as part of fault analysis and resolution.
Assist with the support of systems such as Telephony and CCTV.
Undertake a maintenance schedule on specified assets, keeping accurate records of work undertaken.
Prioritisation of own workload.
Any other task deemed reasonable to support the needs of the business.
Training:During this apprenticeship, you will follow a fully supported training programme with LearnTech, delivered through combined weekly remote classroom-based training, workplace assessment/training and online learning working towards completing the Information Communications Technician standard.
The training covers the following core occupational duties:
https://skillsengland.education.gov.uk/apprenticeships/st0973-v1-2Training Outcome:Upon completion of the apprenticeship, the applicant will have a Level 3 qualification for an Information Communications Technician.Employer Description:We offer high quality training delivered flexibly to meet customer requirements in the fire safety sector.
Xact trains personnel from over 50 fire brigades throughout the British Isles and Eire, delivering hundreds of courses each year. We are also proud to work with building control professionals. See Courses below for more about our customer base.
We have developed specialist programmes in investigation, enforcement and prosecution; fire engineering including a Level 5 Fire Engineering Design course; schools; healthcare premises and historical buildings.
Our ability to tailor courses, which are conducted in-house or at our Midlands-based training facility, to precise customer requirements accounts for our popularity. Listening and responding to customer feedback is an essential part of the service.Working Hours :Monday - Friday, 9.00am - 5.00pm.Skills: Communication skills,IT skills,Attention to detail,Organisation skills,Customer care skills,Problem solving skills,Administrative skills,Number skills,Analytical skills,Team working,Initiative,Patience....Read more...
During your period of training, you will learn how to install, service and repair breakdowns of Mazak CNC Machines
Learning how to diagnose faults, check machine alignments and change electrical drives, motors and encoders
Once trained, you will be visiting customers; you should expect to be staying away from home, depending on the distance to the customer's premises
Whilst completing your apprenticeship, you will be required to spend the first and second year at our state-of-the-art production facility, our European Headquarters based in Worcester, Worcestershire
Training:Formal training is delivered at HWGTA, located in Worcester (WR4 9GN).
Duration approximately 40-45 months.
Year 1, between 22-39 weeks are spent at HWGTA Training Centre developing practical engineering skills, alongside one day per week in the classroom, completing the theoretical elements of the EAL Level 3 Diploma in Advanced Manufacturing Engineering.Year 2, predominantly based in your company, returning to the Training Centre one day per week to continue and complete the specialised elements of their Level 3 Diploma (Development Knowledge).
Years 3-4
Based full-time in your company, developing practical skills and knowledge in preparation for the End Point Assessment to gain your Mechatronics Maintenance Technician Level 3.Training Outcome:
Specialisation in a core module
Senior Service/ Breakdown Engineers
Employer Description:Yamazaki Mazak UK Ltd is based at the European manufacturing plant in Worcester, which also houses the European Technology Centre (ETC) and gives customers direct access to support from the UK’s largest and most expert team of engineers, with vast experience in machine tool applications for almost every industry sector.
Our European Manufacturing Plant is not just a machine tool assembly plant. We pride ourselves in managing a complete operation. We machine our castings, we make our own spindles, our own turrets, our own tool magazines and our own sheet metal covers.
We’re committed to manufacturing in Europe and have continually invested in new machinery and equipment for the factory since its opening in 1987.Working Hours :Normal working hours will be from 08:15 to 16:30, Monday to Friday, but can be adjusted starting as early as 07:45.Skills: Communication skills,Organisation skills,Problem solving skills,Number skills,Team working,Demonstrate Practical ability,Hardworking,Self-motivated,Good time management,Work well under pressure....Read more...
Electronic Production Technician to work on low volume, high value Electronic Systems manufacturing principally with hand tools including micro soldering, test, fault finding and repair of electrical and electronic systems and components.
You will integrate and test electrical and electromechanical tools and take responsibility for the test equipment used to test tools.
Experience and skills required
Electronic lab equipment including: Multi-meter, Oscilloscope, Low Voltage Power Supplies, High Voltage Power Supply, measurement, test and debugging of electromechanical assemblies.
Electrical or Electronic engineering qualification (e.g ONC, HNC, HND, NVQ Level 2)
Proven ability to work successfully within design constraints.
Electronic tools and general test equipment competence.
Producing deliverable items from full drawing packs to relevant IPC standards.
Role responsibilities
Good electronic technician skills: testing, low and high voltage experience, basic soldering, crimping, and assembly.
Fault finding and rectification at system and component level.....Read more...
Electrical Assembler
Our client is a high value low volume precision electronics device manufacturer based in Stonehouse looking for an Electrical Assembler to join their team.
Requirements
Proven experience as an electrical and ideally be IPC certified (IPC 620 and J-Std preferred)
Competent at soldering, crimping and general wiring skills
Ability to use electrical and hand tools (e.g., wire strippers, voltmeter)
Relevant vocational training or completion of an apprenticeship as an electrician
Ability to apply basic arithmetic operations, compute ratio and rate, percentage
Education on ONC, HNC, HND in Electronics or equivalent and A Levels in Maths
Key Responsibilities
Develops insights into 5S improvements, capable of realizing improvements.
Preparation and assembly of cable and pipe ways, bracketing and support systems
Accesses Engineering database and navigates to find latest Releases of drawings
Takes ownership of, and supports Lean and 5S improvements....Read more...
We are looking for a Senior Civil Engineer to join a growing buildings team, delivering a range of multi-disciplinary projects from concept through to construction. This role would suit someone with experience managing small to medium-scale civils projects, who can balance technical delivery, resourcing, and commercial aspects.
Key Responsibilities
Lead civil engineering design across all project stages
Deliver earthworks, drainage, roads, and pavement designs
Prepare reports, drawings, and technical submissions
Liaise with clients, contractors, and local authorities
Support and mentor junior engineers
Contribute to project planning, budgets, and programme delivery
Requirements
Degree-qualified Civil Engineer with five years experience
Experience in buildings and infrastructure projects
Strong knowledge of DMRB, MCHW, and local authority standards
Proficiency in AutoCAD and drainage design software (InfoDrainage)
Experience with Civil 3D (preferred)
Chartered or working towards ICE chartership
Senior AutoCAD Civil Design Engineer....Read more...
Mechanical Technician required to produce and assemble components including conduct tests, measurements, operations and process controls as part of a marine assembly systems manufacturing team.
The ideal candidate will have precision engineering maritime or aerospace production experience reading blueprints to identify components, perform production assembly, test and repair.
Requirements
Manufacturing experience in comparable high value low volume environment, ideally maritime, subsea or aerospace.
Mechanical production using hand tools, automated machines and assemblies.
Quality processes understanding, assembly, test, troubleshoot, repair, test.
Other relevant skills include:
Wire preparation, strip, crimp and termination.
Manufacturing Systems tools maintenance and harness repair.
Hydraulic machine operation and programming.
Continuous improvement.
Responsibilities
Mechanical assembly of precision engineers high value projects.
Prosecute test techniques as per cell procedure.
Work from bill of materials, job packets, routings, work orders, wire lists and quality procedures.
Evaluate, repair and maintain production tooling and equipment.....Read more...
Mechanical Technician required to produce and assemble components including conduct tests, measurements, operations and process controls as part of a marine assembly systems manufacturing team.
The ideal candidate will have precision engineering maritime or aerospace production experience reading blueprints to identify components, perform production assembly, test and repair.
Requirements
Manufacturing experience in comparable high value low volume environment, ideally maritime, subsea or aerospace.
Mechanical production using hand tools, automated machines and assemblies.
Quality processes understanding, assembly, test, troubleshoot, repair, test.
Other relevant skills include
Wire preparation, strip, crimp and termination.
Manufacturing Systems tools maintenance and harness repair.
Hydraulic machine operation and programming.
Continuous improvement.
Responsibilities
Mechanical assembly of precision engineers high value projects.
Prosecute test techniques as per cell procedure.
Work from bill of materials, job packets, routings, work orders, wire lists and quality procedures.
Evaluate, repair and maintain production tooling and equipment.....Read more...
We are looking for a skilled Manufacturing Technician to join our growing production team, supporting the build of equipment used in cutting-edge marine and subsea environments. This is a hands-on role ideal for someone with strong electronics assembly and wiring experience.
Key Responsibilities
Operate micro CNC machinery for precision component production
Solder PCBs and electronic circuitry to a high standard
Build and assemble wiring looms and cable harnesses
Follow manufacturing procedures, technical drawings, and circuit diagrams
Carry out PAT testing and quality inspections on circuitry and cables
Ensure all products meet strict quality and safety standards
Key Skills
Proven experience in electronic assembly or manufacturing
Strong PCB soldering and wiring skills
Ability to read and interpret circuit diagrams and engineering drawings
Experience with micro CNC machines (desirable)
High attention to detail and commitment to quality....Read more...
Our client has an opportunity for a Hardware Engineer. Main duties are transferring of new hardware products from the initial design to mass production. The candidate must be inquisitive and driven to strive for excellence in manufacturing.
Key Responsibilities
Support the Hardware Realisation Engineer in the development of test processes, training, and manufacturing transfer to Production.
Work with the design engineers to ensure new products are manufacturable with consideration to Design for Test, Design for Manufacturing, Design for Assembly.
Support the development and implementation of automated testing for production and our external manufacturing partners.
Essential skills
Key requirements are an aptitude for electronics manufacturing, enthusiasm for efficiency, and desire to make process improvements.
Suitable candidates will be ideally educated to a degree level in Electronic Engineering (or equivalent)
Previous experience in electronic PCB manufacture, designing circuits, soldering, and Arduino development would be advantageous.....Read more...
We are looking for a Senior Civil Engineer to join a growing buildings team, delivering a range of multi-disciplinary projects from concept through to construction. This role would suit someone with experience managing small to medium-scale civils projects, who can balance technical delivery, resourcing, and commercial aspects.
Key Responsibilities
Lead civil engineering design across all project stages
Deliver earthworks, drainage, roads, and pavement designs
Prepare reports, drawings, and technical submissions
Liaise with clients, contractors, and local authorities
Support and mentor junior engineers
Contribute to project planning, budgets, and programme delivery
Requirements
Degree-qualified Civil Engineer with five years experience
Experience in buildings and infrastructure projects
Strong knowledge of DMRB, MCHW, and local authority standards
Proficiency in AutoCAD and drainage design software (InfoDrainage)
Experience with Civil 3D (preferred)
Chartered or working towards ICE chartership
Senior AutoCAD Civil Design Engineer....Read more...
Mechanical Technician required to produce and assemble components including conduct tests, measurements, operations and process controls as part of a marine assembly systems manufacturing team.
The ideal candidate will have precision engineering maritime or aerospace production experience reading blueprints to identify components, perform production assembly, test and repair.
Requirements
Manufacturing experience in comparable high value low volume environment, ideally maritime, subsea or aerospace.
Mechanical production using hand tools, automated machines and assemblies.
Quality processes understanding, assembly, test, troubleshoot, repair, test.
Other relevant skills include:
Wire preparation, strip, crimp and termination.
Manufacturing Systems tools maintenance and harness repair.
Hydraulic machine operation and programming.
Continuous improvement.
Responsibilities
Mechanical assembly of precision engineers high value projects.
Prosecute test techniques as per cell procedure.
Work from bill of materials, job packets, routings, work orders, wire lists and quality procedures.
Evaluate, repair and maintain production tooling and equipment.....Read more...
Mechanical Technician required to produce and assemble components including conduct tests, measurements, operations and process controls as part of a marine assembly systems manufacturing team.
The ideal candidate will have precision engineering maritime or aerospace production experience reading blueprints to identify components, perform production assembly, test and repair.
Requirements
Manufacturing experience in comparable high value low volume environment, ideally maritime, subsea or aerospace.
Mechanical production using hand tools, automated machines and assemblies.
Quality processes understanding, assembly, test, troubleshoot, repair, test.
Other relevant skills include
Wire preparation, strip, crimp and termination.
Manufacturing Systems tools maintenance and harness repair.
Hydraulic machine operation and programming.
Continuous improvement.
Responsibilities
Mechanical assembly of precision engineers high value projects.
Prosecute test techniques as per cell procedure.
Work from bill of materials, job packets, routings, work orders, wire lists and quality procedures.
Evaluate, repair and maintain production tooling and equipment.....Read more...
We are looking for a skilled Manufacturing Technician to join our growing production team, supporting the build of equipment used in cutting-edge marine and subsea environments. This is a hands-on role ideal for someone with strong electronics assembly and wiring experience.
Key Responsibilities
Operate micro CNC machinery for precision component production
Solder PCBs and electronic circuitry to a high standard
Build and assemble wiring looms and cable harnesses
Follow manufacturing procedures, technical drawings, and circuit diagrams
Carry out PAT testing and quality inspections on circuitry and cables
Ensure all products meet strict quality and safety standards
Key Skills
Proven experience in electronic assembly or manufacturing
Strong PCB soldering and wiring skills
Ability to read and interpret circuit diagrams and engineering drawings
Experience with micro CNC machines (desirable)
High attention to detail and commitment to quality....Read more...
Our client has an opportunity for a Hardware Engineer. Main duties are transferring of new hardware products from the initial design to mass production. The candidate must be inquisitive and driven to strive for excellence in manufacturing.
Key Responsibilities
Support the Hardware Realisation Engineer in the development of test processes, training, and manufacturing transfer to Production.
Work with the design engineers to ensure new products are manufacturable with consideration to Design for Test, Design for Manufacturing, Design for Assembly.
Support the development and implementation of automated testing for production and our external manufacturing partners.
Essential skills
Key requirements are an aptitude for electronics manufacturing, enthusiasm for efficiency, and desire to make process improvements.
Suitable candidates will be ideally educated to a degree level in Electronic Engineering (or equivalent)
Previous experience in electronic PCB manufacture, designing circuits, soldering, and Arduino development would be advantageous.....Read more...
Cleanroom Technician required to join an existing technical team as part of the internal Electrical Engineering Division with multiple Cleanrooms.
You will be responsible for helping maintain equipment and report problems with the operation of the cleanrooms, from contributing to lab waste management, user requests, restocking, sample management and general housekeeping and safety in the cleanrooms.
The ideal candidate will be educated to GCSE level 4 / NVQ level 2 or equivalent with Mathematics, English and a science subject or have an equivalent level of practical experience.
As you will be joining an existing team, it is essential that you are a team player with good communication, interpersonal and organisational skills. IT literacy is a bonus, the ideal candidate will have previous experience in a Cleanroom or laboratory environment with health and safety knowledge of hazardous materials, electricity, machinery, pressurised systems and the safe use of chemicals.....Read more...
Mechanical Design Engineer with subsea connector experience required to design and develop solutions with CAD and FEA tools high pressure underwater applications.
Requirements
Subsea or offshore mechanical system design experience.
CAD software and FEA tool fluency.
Subsea production systems, umbilical???s, jumpers, electrical and fibre connector knowledge.
Pressure testing, connector design.
Understanding of sealing technologies, pressure-rated designs, and mechanical-electrical interface design.
BEng or MEng in mechanical engineering or related degree subject.
Responsibilities
Design and develop Low and High Voltage subsea electrical and optical connectors, pressure housings, and sealing systems.
Perform FEA mechanical, thermal, and pressure simulations for HPHT high pressure and temperature for deep sea environments.
Prototype testing, pressure testing, and standard qualification.
Detailed documentation Design Specifications, Qualification Test procedures, 3D models, 2D drawings, BOMs, and Test Reports.
Design reviews and PEER reviews.
RCAs, FMEA, dFMEA, pFEMA at development and design cycles.
Cross-functional Collaboration.
Technical 2D drawings....Read more...
Electronic Test Equipment Calibration Engineer required to join a growing Calibration and Maintenance team for a defence company supporting Armed Forces to defending our freedom.
As part of an experienced team of Calibration and Maintenance Engineers you will support complex test platforms in the manufacture and test of missile systems by calibrating bespoke factory test equipment from DC to Microwave.
Requirements
Experience calibrating test equipment to component level.
Ability to work from specifications, handbooks and drawings to conduct appropriate measurements and repairs down to component level on electronic test equipment.
HNC, HND or higher qualification in Electrical or Electronics Engineering.
Responsibilities
Service Electrical and Electronic Test Equipment, including Special to Type Test Equipment STTE, work is extremely varied, interesting and challenging.
Support manufacturing across all stages of product assembly integration and test.
Resolve routine and nonroutine including calibrations, commissioning, drift analysis, fault finding and repair of test equipment.....Read more...
An established power solutions company is seeking an experienced Electrician or Power Supply Engineer to join its technical team. This field based role involves installation, commissioning, maintenance, and repair of Uninterruptible Power Supply or UPS systems and related power equipment across the UK and Europe.
Requirements
Experience as a UPS, Power Systems, or Electrical Engineer.
Strong knowledge of single and three phase UPS systems.
Qualified to City and Guilds or NVQ Level 3 in Electrical Engineering.
Full UK driving licence and passport (for European travel).
Responsibilities
Install, service, and maintain UPS systems and associated power equipment.
Diagnose faults, perform repairs, and carry out preventative maintenance.
Provide technical support and ensure high quality customer service.
Complete accurate service reports and maintain compliance with safety standards.
If you???re a skilled engineer looking for a varied, hands on role with travel and responsibility, we???d like to hear from you.
....Read more...
In this role, you will be responsible for ensuring the timely delivery of equipment and optimizing its operational efficiency. Your primary focus will be on improving the reliability of division's equipment assets and increasing their utilization and efficiency.
Key requirements
Execute work orders in maintenance business system to record time spent on maintenance activities and ensure the asset being worked on has accurate records.
Verify the status of equipment certifications and calibrations.
Perform or assist in final function testing such as calibration, inspection, certification or verification, which may include pressure test, measurement calibration, metrological inspection.
Prepare equipment and associated critical spares for shipment and staging to a pre-determined location or loading zone.
Key skills
Previous experience as a field maintenance.
Familiarity with maintenance business systems and work order management.
Knowledge of equipment certifications and calibration
Technical college HND or equivalent in Engineering or science discipline. ....Read more...
An established power solutions company is seeking an experienced Electrician or Power Supply Engineer to join its technical team. This field based role involves installation, commissioning, maintenance, and repair of Uninterruptible Power Supply or UPS systems and related power equipment across the UK and Europe.
Requirements
Experience as a UPS, Power Systems, or Electrical Engineer.
Strong knowledge of single and three phase UPS systems.
Qualified to City and Guilds or NVQ Level 3 in Electrical Engineering.
Full UK driving licence and passport (for European travel).
Responsibilities
Install, service, and maintain UPS systems and associated power equipment.
Diagnose faults, perform repairs, and carry out preventative maintenance.
Provide technical support and ensure high quality customer service.
Complete accurate service reports and maintain compliance with safety standards.
If you???re a skilled engineer looking for a varied, hands on role with travel and responsibility, we???d like to hear from you.
....Read more...
