As a Chubb Apprentice Engineer you will:
Get off to a great start on a rewarding career in a vibrant and exciting sector that is set to continue to grow and is continuously adopting new innovations as technologies evolve
Attend and gain experience on a wide variety of different client sites, ranging from domestic dwellings to multi-site global businesses
Receive training and exposure to a broad range of Fire or Security Systems equipment, from small and simple applications through to large networked complex configurations
Get training and experience of installing, testing and commissioning cabling and containment systems, components and control equipment on new systems as well as maintaining our existing clients Fire and/or Security solutions
Work in small teams to begin with, gradually building your knowledge, skills and behaviours that will allow you to work on your own installation and service projects
Be provided with and receive training on a wide range of hand and power tools, as well as all required testing and safety equipment
Use a range of access equipment including steps and extension ladders, hop-ups and podiums, mobile and fixed scaffolding etc.
Training:
While on this apprenticeship, you will work towards a Level 3 Fire Emergency & Security Systems Technician apprenticeship if based in England
The training will consist of week-long modules covering theory and practical classroom training, manufacturer systems training, and real-world experience shadowing Chubb engineers in the field
Be prepared to attend local college on day-release or stay away as required on weekly block-release residential training, as delivered by our Apprenticeship training partners
Training Outcome:
Complete the programme and you will join one of our field installation and maintenance teams as a fully qualified engineer. Here your training will continue, with close support from our early careers team
Employer Description:Chubb is a leading provider of fire safety and security solutions and services for customers worldwide. We have been protecting people and assets for over 200 years. Today, our 14,000 employees work from 250 branches in 20 countries to make the world a safer place. You will find our solutions covering over 1.3 million customer sites.Working Hours :Monday - Friday, 9.00am - 5.00pm with 30 minutes for lunch.Skills: Communication skills,IT skills,Attention to detail,Organisation skills,Customer care skills,Problem solving skills,Logical,Team working....Read more...
JOB DESCRIPTION
GENERAL PURPOSE OF THE JOB:
This position performs diagnostic various onsite inspections for customers as well as other inspection services
ESSENTIAL DUTIES AND RESPONSIBILITIES:
Perform/assist with diagnostic roof inspections, including Infrared, Nuclear, visual, & other inspection services, along with related information gathering and verification tasks. Work with Lead Diagnostics Technician Collaborate with other Field Supervisors as necessary. Assist with the Quality Control (QC) process of all diagnostic jobs, including the proper documentation, to ensure that all work was completed properly and that the customer was fully satisfied. Conduct and foster professional and timely communication (via email, voicemail, in person) with the customers, sales reps, field staff, and internal company personnel on all diagnostic related matters. Serve as a contact for the office personnel if there are any problems concerning a diagnostic issue. Project a professional appearance and demeanor at all times while completing services for a customer. In conjunction with the Manager of Diagnostic Services, assist in the training of other field personnel on diagnostic tools, techniques, processes, etc. Proper completion of all services and related paperwork. Participate in all safety trainings and complete any required documentation. Perform any other duty and/or project as required or assigned by the Manager of Diagnostic Services or the VP of General Services
ADDITIONAL SKILLS AND QUALIFICATIONS:
Prior roofing inspection and diagnostic experience Prior roofing experience, including patch and repair skills Knowledge of Project Management, planning, and scheduling skills Knowledge and experience in monitoring and maintaining Quality Control Functional computer skills Prior safety training and complete a minimum of 10-hour OSHA certification Planning and organizational skills. Able to juggle multiple priorities and demonstrate good task management Ability to work independently Excellent customer service skills and ability to build relationships Ability to climb up and down interior/exterior ladders to access roofs (minimum of 20 ft.) and carry basic hand tools, equipment, and/or material up to approx. 75 lbs. over long distances Capable of walking along rooftop edges (no fear of heights, good balance, etc.) Ability to handle prolonged exposure to outside weather conditions (heat, cold, etc.)
Qualified applicants will receive consideration for employment without regard to their race, color, religion, national origin, sex, sexual orientation, gender identity, protected veteran status or disability.Apply for this ad Online!....Read more...
JOB DESCRIPTION
GENERAL PURPOSE OF THE JOB:
This position performs diagnostic various onsite inspections for customers as well as other inspection services
ESSENTIAL DUTIES AND RESPONSIBILITIES:
Perform/assist with diagnostic roof inspections, including Infrared, Nuclear, visual, & other inspection services, along with related information gathering and verification tasks. Work with Lead Diagnostics Technician Collaborate with other Field Supervisors as necessary. Assist with the Quality Control (QC) process of all diagnostic jobs, including the proper documentation, to ensure that all work was completed properly and that the customer was fully satisfied. Conduct and foster professional and timely communication (via email, voicemail, in person) with the customers, sales reps, field staff, and internal company personnel on all diagnostic related matters. Serve as a contact for the office personnel if there are any problems concerning a diagnostic issue. Project a professional appearance and demeanor at all times while completing services for a customer. In conjunction with the Manager of Diagnostic Services, assist in the training of other field personnel on diagnostic tools, techniques, processes, etc. Proper completion of all services and related paperwork. Participate in all safety trainings and complete any required documentation. Perform any other duty and/or project as required or assigned by the Manager of Diagnostic Services or the VP of General Services
ADDITIONAL SKILLS AND QUALIFICATIONS:
Prior roofing inspection and diagnostic experience Prior roofing experience, including patch and repair skills Knowledge of Project Management, planning, and scheduling skills Knowledge and experience in monitoring and maintaining Quality Control Functional computer skills Prior safety training and complete a minimum of 10-hour OSHA certification Planning and organizational skills. Able to juggle multiple priorities and demonstrate good task management Ability to work independently Excellent customer service skills and ability to build relationships Ability to climb up and down interior/exterior ladders to access roofs (minimum of 20 ft.) and carry basic hand tools, equipment, and/or material up to approx. 75 lbs. over long distances Capable of walking along rooftop edges (no fear of heights, good balance, etc.) Ability to handle prolonged exposure to outside weather conditions (heat, cold, etc.)
Qualified applicants will receive consideration for employment without regard to their race, color, religion, national origin, sex, sexual orientation, gender identity, protected veteran status or disability.Apply for this ad Online!....Read more...
The range of duties is broad and varies depending on the post, but may include the following:
Taking in and handing out prescriptions dispensing prescriptions
Using computer systems to generate stock lists and labels
Helping to maintain stock levels
Ordering items for use within a department
Receiving, loading, unloading incoming goods from wholesalers, manufacturers and elsewhere
Delivering pharmaceuticals and other goods to sites within a pharmacy department, and wards/departments/clinical areas
Selling over the counter medicines
Answering queries on the supply and availability of medicines
Responding to telephone and face to face enquiries of a routine nature from patients and customers
Bringing any problems identified or queries raised to the attention of pharmacists or pharmacy technicians
Pre-packing, assembling and labelling medicines
Assisting with the manufacture of medicines
Preparing medicines 'aseptically' (preparing medicines in a very clean environment using special techniques)
Ensuring that health and safety requirements are met
Most common daily duties are as follows:
Scanning and labelling prescriptions
Bagging patient prescriptions
Stock replenishment
Stock rotation
Serving customers
General housekeeping
Training:
Level 2 Pharmacy Assistant Apprenticeship Standard qualification
How training will be delivered is to be confirmed
Training Outcome:
Full-time position may be available for the right candidate
The opportunity to progress onto your Level 3 Pharmacy Technician Apprenticeship may also be available
Employer Description:We are seeking to recruit a new member to join our dispensing team in our innovative small team of qualified professionals, as an Apprentice Pharmacy Assistant. For the right person, there is the opportunity to secure full-time employment and progress to higher level qualification.Delivery of customer service Working week Shifts to be confirmed What will the apprentice be doing? Dispensing of medication to patients Over counter sales of non-prescription medication Check and monitor prescription slips Health & Safety Responsibility Observing COVID Restrictions and Guidelines Use of Patient Record Systems and use of smart card Data Entry relating to medication Labelling and Dispensing Accuracy and Attention to detail Numerate Working within a team environment Liaison with Doctors surgery and health professionalsWorking Hours :Shifts to be confirmed during interview.Skills: Communication skills,IT skills,Attention to detail,Organisation skills,Customer care skills,Problem solving skills,Administrative skills,Number skills,Analytical skills,Team working,Initiative,Patience....Read more...
As a Chubb Apprentice Engineer you will:
Get off to a great start on a rewarding career in a vibrant and exciting sector that is set to continue to grow and is continuously adopting new innovations as technologies evolve
Attend and gain experience on a wide variety of different client sites, ranging from domestic dwellings to multi-site global businesses
Receive training and exposure to a broad range of Fire or Security Systems equipment, from small and simple applications through to large networked complex configurations
Get training and experience of installing, testing and commissioning cabling and containment systems, components and control equipment on new systems as well as maintaining our existing clients Fire and/or Security solutions
Work in small teams to begin with, gradually building your knowledge, skills and behaviours that will allow you to work on your own installation and service projects
Be provided with and receive training on a wide range of hand and power tools, as well as all required testing and safety equipment
Use a range of access equipment including steps and extension ladders, hop-ups and podiums, mobile and fixed scaffolding etc.
Training:
While on this apprenticeship, you will work towards a Level 3 Fire Emergency & Security Systems Technician apprenticeship if based in England
The training will consist of week-long modules covering theory and practical classroom training, manufacturer systems training, and real-world experience shadowing Chubb engineers in the field
Be prepared to attend local college on day-release or stay away as required on weekly block-release residential training, as delivered by our Apprenticeship training partners
Training Outcome:
Complete the programme and you will join one of our field installation and maintenance teams as a fully qualified engineer. Here your training will continue, with close support from our early careers team
Employer Description:Chubb is a leading provider of fire safety and security solutions and services for customers worldwide. We have been protecting people and assets for over 200 years. Today, our 14,000 employees work from 250 branches in 20 countries to make the world a safer place. You will find our solutions covering over 1.3 million customer sites.Working Hours :Monday - Friday, 9.00am - 5.00pm with 30 minutes for lunch.Skills: Communication skills,IT skills,Attention to detail,Organisation skills,Customer care skills,Problem solving skills,Logical,Team working....Read more...
As a Chubb Apprentice Engineer you will:
Get off to a great start on a rewarding career in a vibrant and exciting sector that is set to continue to grow and is continuously adopting new innovations as technologies evolve.
Attend and gain experience on a wide variety of different client sites, ranging from domestic dwellings to multi-site global businesses.
Receive training and exposure to a broad range of Fire or Security Systems equipment, from small and simple applications through to large networked complex configurations.
Get training and experience of installing, testing and commissioning cabling and containment systems, components and control equipment on new systems as well as maintaining our existing clients Fire and/or Security solutions.
Work in small teams to begin with, gradually building your knowledge, skills and behaviours that will allow you to work on your own installation and service projects.
Be provided with and receive training on a wide range of hand and power tools, as well as all required testing and safety equipment.
Use a range of access equipment including steps and extension ladders, hop-ups and podiums, mobile and fixed scaffolding etc.
Training:
While on this apprenticeship, you will work towards a Level 3 Fire Emergency & Security Systems Technician apprenticeship if based in England.
The training will consist of week-long modules covering theory and practical classroom training, manufacturer systems training, and real-world experience shadowing Chubb engineers in the field.
Be prepared to attend local college on day-release or stay away as required on weekly block-release residential training, as delivered by our Apprenticeship training partners.
Training Outcome:
Complete the programme and you will join one of our field installation and maintenance teams as a fully qualified engineer. Here your training will continue, with close support from our early careers team.
Employer Description:Chubb is a leading provider of fire safety and security solutions and services for customers worldwide. We have been protecting people and assets for over 200 years. Today, our 14,000 employees work from 250 branches in 20 countries to make the world a safer place. You will find our solutions covering over 1.3 million customer sites.Working Hours :Monday - Friday, 9.00am - 5.00pm with 30 minutes for lunch.Skills: Communication skills,IT skills,Attention to detail,Organisation skills,Customer care skills,Problem solving skills,Logical,Team working....Read more...
As a Chubb Apprentice Engineer you will:
Get off to a great start on a rewarding career in a vibrant and exciting sector that is set to continue to grow and is continuously adopting new innovations as technologies evolve.
Attend and gain experience on a wide variety of different client sites, ranging from domestic dwellings to multi-site global businesses.
Receive training and exposure to a broad range of Fire or Security Systems equipment, from small and simple applications through to large networked complex configurations.
Get training and experience of installing, testing and commissioning cabling and containment systems, components and control equipment on new systems as well as maintaining our existing clients Fire and/or Security solutions.
Work in small teams to begin with, gradually building your knowledge, skills and behaviours that will allow you to work on your own installation and service projects.
Be provided with and receive training on a wide range of hand and power tools, as well as all required testing and safety equipment.
Use a range of access equipment including steps and extension ladders, hop-ups and podiums, mobile and fixed scaffolding etc.
Training:
While on this apprenticeship, you will work towards a Level 3 Fire Emergency & Security Systems Technician apprenticeship if based in England.
The training will consist of week-long modules covering theory and practical classroom training, manufacturer systems training, and real-world experience shadowing Chubb engineers in the field.
Be prepared to attend local college on day-release or stay away as required on weekly block-release residential training, as delivered by our Apprenticeship training partners.
Training Outcome:Complete the programme and you will join one of our field installation and maintenance teams as a fully qualified engineer. Here your training will continue, with close support from our early careers team.Employer Description:Chubb is a leading provider of fire safety and security solutions and services for customers worldwide. We have been protecting people and assets for over 200 years. Today, our 14,000 employees work from 250 branches in 20 countries to make the world a safer place. You will find our solutions covering over 1.3 million customer sites.Working Hours :Monday - Friday 9.00am - 5.00pm with 30 minutes for lunch.Skills: Communication skills,IT skills,Attention to detail,Organisation skills,Customer care skills,Problem solving skills,Logical,Team working....Read more...
Become trained and competent in carrying out daily and safety exams Carry out general depot duties e.g. Line of Routes
Provide technical support to the depot teams in the provision of primary fault finding/reporting
Be responsible for managing the 5 S standards across the depot
Provide corrective maintenance (Electrical or Mechanical)
Provide preventative maintenance (Electrical or Mechanical)
Provide secondary fault finding
Positioning of fault data into shared drive facility
Carry out all duties in accordance with the Train Care Centre quality and safety procedures
Ensure work is performed in a safe and effective manner and in accordance with the Health & Safety at Work Act (1974), Electricity at Work Regulations (1989), Railway Group Standards, and relevant Alstom Procedures
Training:
Training will take place on block release at college
Mandatory and role specific training will take place at the depot
You will complete the Rail Engineering Technician Level 3 Apprenticeship standard which will in cludes
Level 3 Rail Engineering (Competence)
Level 3 Rail Engineering (Technical Knowledge)
You will undertake a planned rotation within appropriate departments in order to gain the skills, and competence to complete the Standard requirements. In addition, you will attend education on block release to achieve the Knowledge, Behaviours and, Competencies as required by the apprenticeship. Attendance outside of standard work patterns should be expected. Training Outcome:
Subject to business needs we would expect to put you in your first role on successful completion of your apprenticeship.
Employer Description:At Alstom, we understand transport networks and what moves people. From high-speed trains, metros, monorails, and trams, to turnkey systems, services, infrastructure, signalling and digital mobility, we offer our diverse customers the broadest portfolio in the industry. Every day, 80,000 colleagues lead the way to greener and smarter mobility worldwide, connecting cities as we reduce carbon and replace cars.
Alstom is the UK & Ireland’s leading supplier of new trains and train services, and a leading signalling and rail infrastructure provider. Alstom have built, or are building, just under 40% of the UK mainline train fleet; as well as the entire fleets in service with London Underground and Dublin Luas. We provide the widest range of smart solutions in the rail market, from innovative high-speed rolling stock, metros and trams to maintenance, modernisation, infrastructure and signalling.Working Hours :Monday to Friday, 8.00am - 4.00pm.Skills: Communication skills,Attention to detail,Problem solving skills,Logical,Team working,Initiative....Read more...
As a Chubb Apprentice Engineer you will:
Get off to a great start on a rewarding career in a vibrant and exciting sector that is set to continue to grow and is continuously adopting new innovations as technologies evolve
Attend and gain experience on a wide variety of different client sites, ranging from domestic dwellings to multi-site global businesses
Receive training and exposure to a broad range of Fire or Security Systems equipment, from small and simple applications through to large networked complex configurations
Get training and experience of installing, testing and commissioning cabling and containment systems, components and control equipment on new systems as well as maintaining our existing clients Fire and/or Security solutions
Work in small teams to begin with, gradually building your knowledge, skills and behaviours that will allow you to work on your own installation and service projects
Be provided with and receive training on a wide range of hand and power tools, as well as all required testing and safety equipment.
Use a range of access equipment including steps and extension ladders, hop-ups and podiums, mobile and fixed scaffolding etc.
Training:
While on this apprenticeship, you will work towards a Level 3 Fire Emergency & Security Systems Technician qualification
The training will consist of week-long modules covering theory and practical classroom training, manufacturer systems training, and real-world experience shadowing Chubb engineers in the field
Be prepared to attend local college on day-release or stay away as required on weekly block-release residential training, as delivered by our apprenticeship training partners
Training Outcome:
Complete the programme and you will join one of our field installation and maintenance teams as a fully qualified engineer. Here your training will continue, with close support from our early careers team
Employer Description:Chubb is a leading provider of fire safety and security solutions and services for customers worldwide. We have been protecting people and assets for over 200 years. Today, our 14,000 employees work from 250 branches in 20 countries to make the world a safer place. You will find our solutions covering over 1.3 million customer sites.Working Hours :Monday- Friday
09:00- 17:00
With 30 minutes lunchSkills: Communication skills,IT skills,Attention to detail,Organisation skills,Customer care skills,Problem solving skills,Logical,Team working....Read more...
Your role includes the technical and practical needs for today’s motor vehicle body repair industry. You will study both the theory and practical aspects. The successful candidate will work independently and as part of a team following a defined process, using their skills to correctly identify the different body panel types and have the ability to use the correct repair tools to carry out the work to the highest possible standard.
Motor vehicle chassis and body alignment, e.g. underbody measurement and its impact on suspension and steering geometry
Vehicle body types, panel identification, safety systems, materials and alternative fuel
Use of Body Panel Repair tools, equipment and devices used in the process e.g. alignment jigs, resistance welding equipment, riveting and bonding tools
Removal and replacement of body panels and associated parts e.g. mechanically fixed components, chemically fixed components
Interpretation of technical data for joining techniques and replacement panels
Quality control process and the implications of poor quality
Training will take place via Emtec, Ruddington on a block release model 8 x per year.
Personal Qualities:
The ideal candidate will have:
Good communication skills
A passion for the automotive industry
An enthusiasm to learn with an interest in development and progression
A ‘can do’ attitude
Some experience within an automotive workshop environment
The ideal candidate will be:
Driven
Hardworking
Punctual
Reliable
Able to use own initiative
A team player
A keen interest in classic and performance vehicles is imperative
Training:
Nationally recognised qualifications - IMI Apprenticeship in Vehicle damage Body technician (Standard - Level 3)
Functional Skills Level 2 (if required)
Regular review and welfare visits from our assessors who will observe all evidence opportunities that occur naturally in the workplace
Training Outcome:Upon successful completion and review of the apprenticeship, you will have the opportunity to gain employment with the business.Employer Description:With over 30 years of accident repair experience, with sites across the UK and a commitment to delivering exceptional customer service time and time again, Steer is one of the industry's leading automotive repair groups.Working Hours :Monday- Friday, between 8:30am- 4pmSkills: Team working,Initiative,Reliable,punctual....Read more...
JOB DESCRIPTION
GENERAL PURPOSE OF THE JOB:
This position performs diagnostic various onsite inspections for customers as well as other inspection services
ESSENTIAL DUTIES AND RESPONSIBILITIES:
Perform/assist with diagnostic roof inspections, including Infrared, Nuclear, visual, & other inspection services, along with related information gathering and verification tasks. Work with Lead Diagnostics Technician Collaborate with other Field Supervisors as necessary. Assist with the Quality Control (QC) process of all diagnostic jobs, including the proper documentation, to ensure that all work was completed properly and that the customer was fully satisfied. Conduct and foster professional and timely communication (via email, voicemail, in person) with the customers, sales reps, field staff, and internal company personnel on all diagnostic related matters. Serve as a contact for the office personnel if there are any problems concerning a diagnostic issue. Project a professional appearance and demeanor at all times while completing services for a customer. In conjunction with the Manager of Diagnostic Services, assist in the training of other field personnel on diagnostic tools, techniques, processes, etc. Proper completion of all services and related paperwork. Participate in all safety trainings and complete any required documentation. Perform any other duty and/or project as required or assigned by the Manager of Diagnostic Services or the VP of General Services
ADDITIONAL SKILLS AND QUALIFICATIONS:
Prior roofing inspection and diagnostic experience Prior roofing experience, including patch and repair skills Knowledge of Project Management, planning, and scheduling skills Knowledge and experience in monitoring and maintaining Quality Control Functional computer skills Prior safety training and complete a minimum of 10-hour OSHA certification Planning and organizational skills. Able to juggle multiple priorities and demonstrate good task management Ability to work independently Excellent customer service skills and ability to build relationships Ability to climb up and down interior/exterior ladders to access roofs (minimum of 20 ft.) and carry basic hand tools, equipment, and/or material up to approx. 75 lbs. over long distances Capable of walking along rooftop edges (no fear of heights, good balance, etc.) Ability to handle prolonged exposure to outside weather conditions (heat, cold, etc.)
Qualified applicants will receive consideration for employment without regard to their race, color, religion, national origin, sex, sexual orientation, gender identity, protected veteran status or disability.Apply for this ad Online!....Read more...
JOB DESCRIPTION
GENERAL PURPOSE OF THE JOB:
This position performs diagnostic various onsite inspections for customers as well as other inspection services
ESSENTIAL DUTIES AND RESPONSIBILITIES:
Perform/assist with diagnostic roof inspections, including Infrared, Nuclear, visual, & other inspection services, along with related information gathering and verification tasks. Work with Lead Diagnostics Technician Collaborate with other Field Supervisors as necessary. Assist with the Quality Control (QC) process of all diagnostic jobs, including the proper documentation, to ensure that all work was completed properly and that the customer was fully satisfied. Conduct and foster professional and timely communication (via email, voicemail, in person) with the customers, sales reps, field staff, and internal company personnel on all diagnostic related matters. Serve as a contact for the office personnel if there are any problems concerning a diagnostic issue. Project a professional appearance and demeanor at all times while completing services for a customer. In conjunction with the Manager of Diagnostic Services, assist in the training of other field personnel on diagnostic tools, techniques, processes, etc. Proper completion of all services and related paperwork. Participate in all safety trainings and complete any required documentation. Perform any other duty and/or project as required or assigned by the Manager of Diagnostic Services or the VP of General Services
ADDITIONAL SKILLS AND QUALIFICATIONS:
Prior roofing inspection and diagnostic experience Prior roofing experience, including patch and repair skills Knowledge of Project Management, planning, and scheduling skills Knowledge and experience in monitoring and maintaining Quality Control Functional computer skills Prior safety training and complete a minimum of 10-hour OSHA certification Planning and organizational skills. Able to juggle multiple priorities and demonstrate good task management Ability to work independently Excellent customer service skills and ability to build relationships Ability to climb up and down interior/exterior ladders to access roofs (minimum of 20 ft.) and carry basic hand tools, equipment, and/or material up to approx. 75 lbs. over long distances Capable of walking along rooftop edges (no fear of heights, good balance, etc.) Ability to handle prolonged exposure to outside weather conditions (heat, cold, etc.)
Qualified applicants will receive consideration for employment without regard to their race, color, religion, national origin, sex, sexual orientation, gender identity, protected veteran status or disability.Apply for this ad Online!....Read more...
As an apprentice, you’ll work at a company and get hands-on experience. You’ll gain new skills and work alongside experienced staff.
Year one:
Under instruction and within training guidelines, operate/train in the use of Cullum machinery/ equipment in order to gain a good knowledge of machine capacities and metal working techniques.
Learn and develop plating skills and increase knowledge and understanding of fabrication processes.
To carry out instructions from the Technical Service Manager and Team Leaders in all aspects of the role and produce a consistently high standard of work, meeting the targets and deadlines set by manager and relevant training facilitators
Years two and three:
Preparation of engineering calculations over a number of disciplines in support of detail design schemes
Participate in research and development activities
Aid with the carrying out of site survey activities
Produce sketch drawings of design concepts in sufficient detail to enable production of detail design definition drawings
Use IT packages effectively in the course of engineering activities (excel, word, Mathcad, CAD, PDM, PLM, etc.)
Interpret engineering drawings
Interpret and implement engineering specifications and standards
Self-development to meet new requirements
Provide progress status reports to line management on a regular basis and work to achieve or improve company and customer objectives of program, cost and quality
Hazard identification and risk reduction
Training:An apprenticeship allows you to earn a wage, gain valuable work experience and industry specific competence. You will be expected to work towards the Engineering and Manufacturing Support Technician Level 3, with support from your employer and the Chesterfield College Group.Training Outcome:
Full time position within the company
Employer Description:Cullum Detuners Limited is a world leading engineering company with a proven track record in providing advanced engineered solutions to the Aerospace, Energy, Marine and Nuclear Sectors. Browsing our website you will be viewing our company history; the range of products and services we provide and an overview of some of the prestigious projects with which we have been involved.Working Hours :Monday to Friday, 8:30am - 5.00pm.Skills: Communication skills,IT skills,Attention to detail,Organisation skills,Customer care skills,Problem solving skills,Presentation skills,Administrative skills,Number skills,Analytical skills,Logical,Team working,Creative,Initiative,Non judgemental,Patience....Read more...
As a Chubb Apprentice Engineer you will:
Get off to a great start on a rewarding career in a vibrant and exciting sector that is set to continue to grow and is continuously adopting new innovations as technologies evolve
Attend and gain experience on a wide variety of different client sites, ranging from domestic dwellings to multi-site global businesses
Receive training and exposure to a broad range of Fire or Security Systems equipment, from small and simple applications through to large networked complex configurations
Get training and experience of installing, testing and commissioning cabling and containment systems, components and control equipment on new systems as well as maintaining our existing clients Fire and/or Security solutions
Work in small teams to begin with, gradually building your knowledge, skills and behaviours that will allow you to work on your own installation and service projects
Be provided with and receive training on a wide range of hand and power tools, as well as all required testing and safety equipment
Use a range of access equipment including steps and extension ladders, hop-ups and podiums, mobile and fixed scaffolding etc.
Training:
While on this apprenticeship, you will work towards a Level 3 Fire Emergency & Security Systems Technician apprenticeship if based in England
The training will consist of week-long modules covering theory and practical classroom training, manufacturer systems training, and real-world experience shadowing Chubb engineers in the field
Be prepared to attend local college on day-release or stay away as required on weekly block-release residential training, as delivered by our Apprenticeship training partners
Training Outcome:
Complete the programme, and you will join one of our field installation and maintenance teams as a fully qualified engineer. Here your training will continue, with close support from our early careers team
Employer Description:Chubb is a leading provider of fire safety and security solutions and services for customers worldwide. We have been protecting people and assets for over 200 years. Today, our 14,000 employees work from 250 branches in 20 countries to make the world a safer place. You will find our solutions covering over 1.3 million customer sites.Working Hours :Monday - Friday, 9.00am - 5.00pm with 30 minutes for lunch.Skills: Communication skills,IT skills,Attention to detail,Organisation skills,Customer care skills,Problem solving skills,Logical,Team working....Read more...
Operate at an appropriate level carrying out designated tasks for the repair and overhaul of traction equipment within the team assigned
Learn how to operate in a safe manner
Operate as a member of a work team
You will undertake a planned rotation within appropriate departments in order to gain the skills, and competence to complete the Standard requirements
In addition, you will attend education both part time and on block release to achieve the Knowledge, Behaviours and, Competencies as required by the apprenticeship. Attendance outside of standard work patterns should be expected
Provide technical support to the site teams in the provision of primary fault finding/reporting
Provide basic maintenance competency e.g.: side skirt cleans, brake pads, block changes etc.
Provide corrective maintenance (Electrical or Mechanical)
Provide preventative maintenance (Electrical or Mechanical)
Provide secondary fault finding
Carry out Testing & Re-commissioning activities in accordance with pre-written test and commissioning procedures
Functionally test systems with minimal supervision using a variety of techniques and methods, including the use of computer-based diagnostics systems
Training:
You will complete the Level 3 Rail Engineering Technician Apprenticeship which will include a knowledge and a competency qualification
You will complete mandatory training
You will receive role specific training
Training Outcome:
Subject to business needs we would expect to put you in your first role on successful completion of your apprenticeship.
Employer Description:At Alstom, we understand transport networks and what moves people. From high-speed trains, metros, monorails, and trams, to turnkey systems, services, infrastructure, signalling and digital mobility, we offer our diverse customers the broadest portfolio in the industry. Every day, 80,000 colleagues lead the way to greener and smarter mobility worldwide, connecting cities as we reduce carbon and replace cars.
Alstom is the UK & Ireland’s leading supplier of new trains and train services, and a leading signalling and rail infrastructure provider. Alstom have built, or are building, just under 40% of the UK mainline train fleet; as well as the entire fleets in service with London Underground and Dublin Luas. We provide the widest range of smart solutions in the rail market, from innovative high-speed rolling stock, metros and trams to maintenance, modernisation, infrastructure and signalling.Working Hours :Monday to Friday 08.00am - 4.00pm.Skills: Communication skills,Attention to detail,Problem solving skills,Logical,Team working,Initiative....Read more...
This role will have placements across London with Old Oak Common being the main base
You will undertake a planned rotation within appropriate departments in order to gain the skills, and competence to complete the Standard requirements. In addition you will attend education on block release to achieve the Knowledge, Behaviours and, Competencies as required by the apprenticeship. Attendance outside of standard work patterns should be expected
Become trained and competent in carrying out daily and safety exams Carry out general depot duties e.g. Line of Routes
Provide technical support to the depot teams in the provision of primary fault finding/reporting
Be responsible for managing the 5 S standards across the depot
Provide corrective maintenance (Electrical or Mechanical)
Provide preventative maintenance (Electrical or Mechanical)
Provide secondary fault finding
Positioning of fault data into shared drive facility
Carry out all duties in accordance with the Train Care Centre quality and safety procedures
Ensure work is performed in an safe and effective manner and in accordance with the Health & Safety at Work Act (1974), Electricity at Work Regulations (1989), Railway Group Standards, and relevant Alstom Procedures
Training:
Training will take place on block release at College
Mandatory and role specific training will take place at the depot
You will complete the Rail Engineering Technician Level 3 Apprenticeship standard which will includes and knowledge and a competency qualification
Training Outcome:
On successful completion of the Apprenticeship subject to business need we would expect to put you into your first role
Employer Description:At Alstom, we understand transport networks and what moves people. From high-speed trains, metros, monorails, and trams, to turnkey systems, services, infrastructure, signalling and digital mobility, we offer our diverse customers the broadest portfolio in the industry. Every day, 80,000 colleagues lead the way to greener and smarter mobility worldwide, connecting cities as we reduce carbon and replace cars.
Alstom is the UK & Ireland’s leading supplier of new trains and train services, and a leading signalling and rail infrastructure provider. Alstom have built, or are building, just under 40% of the UK mainline train fleet; as well as the entire fleets in service with London Underground and Dublin Luas. We provide the widest range of smart solutions in the rail market, from innovative high-speed rolling stock, metros and trams to maintenance, modernisation, infrastructure and signalling.Working Hours :Monday - Friday, 8.00am - 4.00pm.Skills: Communication skills,Attention to detail,Problem solving skills,Logical,Team working....Read more...
JOB DESCRIPTION
Euclid Chemical is a fully owned subsidiary of RPM International (NYSE: RPM), one of the world's largest coatings companies. With over 110 years of experience, we provide innovative solutions to the construction and restoration markets through our extensive range of treatments, sealants, coatings, sealers, and decorative products. Recognized as a 2024 NE Ohio Top Workplace by Energage, Euclid Chemical prides itself on fostering a people-first culture that values collaboration, respect, and growth.
Why join our team? Euclid Chemical offers an attractive package for full time personnel, company benefits include but are not limited to:
Medical, Dental and Vision coverage Life Insurance Short Term/Long Term Disability Parental Leave 401k with company match Defined benefit pension plan Employee Stock Purchase Plan Generous vacation and holiday time Car Allowance
SALARY: $80,000 - $85,000 annual base salary
SUMMARY:
The combined role of Dispenser Service Technician (DST) & Sales Representative offers a unique opportunity to blend technical expertise with dynamic sales responsibilities. This individual will play a crucial role in installing, maintaining, and supporting Euclid Chemical's concrete admixture dispensing equipment while actively driving sales growth within their assigned territory. Success in this position requires a proactive approach to customer service, technical problem-solving, and sales execution. The ideal candidate will have the skill set to deliver exceptional service, establish positive customer relationships, and achieve sales targets by promoting Euclid Chemical's wide range of products and services.
KEY RESPONSIBILITIES:
Technical Responsibilities
Install, maintain, and repair dispenser equipment at customer facilities to ensure seamless functionality. Conduct plant evaluations to assess dispenser equipment needs, including electrical conduit, hose lengths, and dispenser placement. Perform regular equipment maintenance, address breakdowns promptly, and maintain a stock of necessary parts for repairs. Retrieve unused field equipment and refurbish reusable items. Handle administrative tasks, including expense reports, DOT certifications, daily updates, and compliance documentation. Transport materials safely as required, including admixtures, fibers, and other products for testing or delivery. Assist in state inspections and ensure compliance with safety protocols. Conduct preventative maintenance and provide hands-on assistance with field services, such as air checks and troubleshooting issues with dispensing systems.
Sales and Customer Relationship Responsibilities
Actively seek out and engage new and existing customer prospects, including construction distributors, contractors, specifiers, and property owners. Present, promote, and sell Euclid Chemical products and services to a diverse customer base. Conduct cost-benefit and needs analysis to tailor solutions for existing and potential customers. Develop and maintain positive relationships with customers, ensuring satisfaction and loyalty. Resolve customer issues quickly and collaboratively by working with internal teams, such as Customer Service, to enhance the client experience. Meet and exceed agreed-upon sales goals within designated timeframes. Analyze territory and market potential, tracking progress through sales reports and following up on customer leads. Provide management with regular updates on customer needs, competitive activity, and market gaps to identify potential opportunities for growth. Stay updated on industry trends, best practices, and promotional strategies to provide customers with current and value-driven solutions.
SKILLS AND REQUIREMENTS:
Travel: Up to 50% travel, including overnight stays within assigned territories.
Flexibility: Availability for early mornings, evenings, weekends, and emergency service calls.
Technical Proficiency in areas like plumbing, electrical systems, fabrication, and mathematical problem-solving. Strong sales acumen with the ability to analyze customer needs and propose tailored solutions that drive sales.
Self-Motivated and capable of working independently or with cross-functional teams. Excellent organizational and time management abilities to balance technical and sales tasks effectively. Professional demeanor, with the ability to build long-term customer relationships and foster trust. A commitment to adhering to Euclid Chemical and customer safety protocols.
EDUCATION AND EXPERIENCE:
High School Diploma Bachelor's degree- preferred but not required. Additional Professional Development Credits/Certifications in Industry advantageous. 3+ years proven work experience in outside sales. Excellent knowledge of MS Office Familiarity with CRM practices Ability to build productive professional relationships
Qualified applicants will receive consideration for employment without regard to their race, color, religion, national origin, sex, protected veteran status or disability.Apply for this ad Online!....Read more...
Our Support Technicians look after service in the Field - this means working on-site with our diverse range of customers, from small local business right up to large FTSE 100 corporate organisations - no two days are the same! Some of our larger and complex customers have very specific needs from our teams and that’s what we’re here to serve. That could be anything from provision or repair, hardware, software or infrastructure.
As a Customer Support Technician, you will be working in the Field day-to-day and have direct exposure to our customers. Working on customer sites every day means you’ll need to be prepared to travel around, but that’s part of the fun! You get to see our technology being used in lots of different, innovative ways, and you get to be part of it. You will attend customer sites to help with installations where engineering support is required to set-up, install, and carry out non-complex and simple repairs.
You will also be able to confidently talk through ideas and problems a customer may have in connection to the BT portfolio. You will make sure customer’s services and solutions are set up and optimised. You will also make recommendations on new digital product and service solutions and may even sell them to the customer!
This is an incredible opportunity for someone who is passionate about technology, but that doesn’t mean you have to be super technical – we’ll give you all the training you need to get you up and running to progress your career within the Field and beyond. Behaviour is more important to us, so if you have a proactive attitude and you love having great conversations, apply today!Training:This apprenticeship will last 18 months, and you’ll spend a minimum 20% of your working hours will be dedicated to learning and studying. You’ll also complete one “study day” a week. At the end of your hard work, you will gain a level 3 qualification in Information Communication.
As an apprentice, you will study for a nationally recognised qualification as you gain hands on experience in our industry.
Please note if your apprenticeship is in Scotland you may study towards a slightly different qualification with different skills. Training Outcome:Once you have qualified you will be a fully qualified BT Business Customer Engineer.Employer Description:You’re not just looking for a career, you’re looking to make a difference.
Millions of people rely on us every day to help them live their lives, power their businesses, and keep their public services running. We connect friends to family, clients to colleagues, people to possibilities. We keep the wheels of business spinning, and the emergency services responding. And we use the power of technology to help solve big challenges, like climate change and cyber security.
From day one, you’ll have a voice at BT Group. You’ll get stuck in to tough challenges, pitching ideas and making things happen. You won’t be alone though: we’ll be there with help and support through you’re learning and development. You’ll make great friends, discover new talents, and feel part of something exhilarating.
This is your chance to make a real difference to the world. Grab it.Working Hours :37.5 hours Monday - Friday, working hours TBCSkills: Communication skills,Customer care skills,Problem solving skills,Logical,Initiative....Read more...
Our three-year apprenticeship programme is the perfect opportunity to earn while you learn. You’ll gain practical, hands-on engineering experience in a dynamic, fast-paced environment while working toward a formal qualification. In partnership with City College Plymouth you’ll achieve a Level 3 in Maintenance and Operations Engineering (MOET) qualification.
You’ll work in our power generation team gaining exposure to:
Planning, installation, repair and maintenance of power generation equipment.
At Aggreko, safety is at the heart of everything we do. As an apprentice, you’ll follow our ‘Safety for Life’ principles, actively engage in safety practices, and contribute to maintaining a safe and supportive working environment for everyone.
Support our technicians in performing routine checks, diagnosing faults, and troubleshooting mechanical and electrical issues.
Collaborating with teams across the business to enhance service delivery and contribute to larger, impactful projects.
Taking part in training opportunities to develop technical expertise and professional skills that will set you up for a successful career.
Working with power generation equipment.
Why join us as an apprentice?
Our programme is designed to give you a wide variety of professional experiences. You’ll work in an Aggreko depot and client sites, with opportunities to also support at world-class events.
Although we're sixty years old, it doesn't feel like it when you work here. You can expect the professionalism and high standards of a larger company – yet you won’t be pigeon-holed into a narrow role.
The sense of teamwork is unique – ‘together’ is one of our core values – and we make sure people feel welcome and included, so they can be themselves at work. Training:Maintenance and operations engineering technician apprenticeship level 3.
You’ll follow a three-year apprentice programme linked to a course of study at City College Plymouth which will, at a minimum, lead to the attainment of a level 3 qualification. Training will be delivered once a week.Training Outcome:Completing your apprenticeship will equip you with valuable skills, knowledge, and experience, setting the stage for the next step in your career. You could explore opportunities within Aggreko, whether at your local depot, in a field-based role, or even in one of our national or international locations. With the foundation you’ve built, the possibilities are wide open. Employer Description:Bring your energy. Grow your career.
At Aggreko, we provide energy solutions so communities can thrive and businesses can grow.
Across the UK and Ireland, our customers benefit from our expertise and the latest, cleanest, and most efficient technologies. From power generation to HVAC and oil-free air, we help a huge variety of operations to keep running.
Our teams in the UK also support customers around the world. The products we manufacture in Scotland, and service and maintain across the UK and beyond, cool gold mines in Australia, electrify events like the Olympics, power factories in Nigeria, warm neighbourhoods in Romania, and bring relief when hurricanes and wildfires strike.
We’re looking for motivated, agile and passionate people to help us make a difference.Working Hours :Monday - Friday, 8am till 4.30pm.Skills: Communication skills,Attention to detail,Organisation skills,Problem solving skills,Logical,Team working,Initiative....Read more...
Year 1 of the apprenticeship:
5 days off the job training at a specialist Training Provider - learning both practical and theoretical skills in engineering.
Year 2 until the completion of the apprenticeship:
4 days on the job training based at the Unipres plant followed by continued studies 1 day a week with a specialist Training Provider (College).
Die Maintenance Department:
Fixing and maintaining the tools that go into the presses - mechanically biased).
Repairing and maintaining press tools using the stamping of steel components.
You will learn how to use milling machines, lathes, surface grinders and specialist welding techniques.
Hand tools such as hacksaws, files and pneumatic grinders.
This apprenticeship is specifically tailored to the Tool & Die pathway
What can we offer you?
Annual holiday entitlement of 26 days and 8 Bank Holiday (company shut down in summer and Christmas).
SMART working – ability to work from home 2 days per week and adjust start time +/- 2 hours - following successful probationary period.
Free onsite car park.
Free electric car charging points on site.
Car lease scheme.
Pension (GPP) 4.5% employee and 4.5% employer.
Life Assurance 4x pensionable pay (after 1 years service for GPP members).
Private healthcare.
On-site occupational health support.
Company sick pay.
Enhanced paternity leave.
Enhanced maternity leave.
Cycle to work scheme.
Profit share.
Sports and social club.
Long service awards.
Monthly prize draw.
On-site canteen.
Training:Year 1 of the apprenticeship:
5 days off the job training at a specialist Training Provider - learning both practical and theoretical skills in engineering.
Year 2 until the completion of the apprenticeship:
4 days on the job training based at the Unipres plant followed by continued studies 1 day a week with a specialist Training Provider (College).
The successful candidates will gain a full Level 3 Engineering Maintenance Technician Standard - pathway Tool & Die Maintenance. You will work alongside other talented technicians within our Die Maintenance Department gaining the relevant skills.
The qualifications the apprentice will receive are as follows:
Level 2 Diploma in Advanced Manufacturing Engineering (Foundation Competence).
Level 2 Award Foundation Phase Gateway Assessment.
Level 3 Diploma in Advanced Manufacturing Engineering (Development Competence) - Tool & Die Maintenance.
Level 3 Diploma in Engineering Technology (QCF).
Training Outcome:Apprentices can progress into full-time work with opportunities to progress through the ranks. Option to progress education further by completing a HNC Level of study. (Higher Apprenticeship in Advanced Manufacturing Engineering Level 4).Employer Description:Unipres UK Ltd is a first tier supplier and manufactures steel car components for Nissan, Renault and Honda. Our plant is based in Sunderland and has been established for over 30 years. We are a global company powered by local people – focused on achieving product excellence, committed to developing our skilled workforce and dedicated to driving forward innovation across our industry. We currently have around 1000 people employed at Unipres (UK).Working Hours :Year 1: College - 8:30am - 15:30pm (Transport provided from Unipres Sunderland throughout year 1 to College).
Years 2 - 4: Unipres plant 4 days a week - 6:45am - 15:03pm.
Shifts dependent on age and department College day release - 9:00am - 16:00pmSkills: Communication skills,IT skills,Attention to detail,Organisation skills,Problem solving skills,Number skills,Analytical skills,Logical,Team working,Creative,Initiative,Patience,Time Management,Work under own initiative,Prioritise workload....Read more...
You’ll be placed on a structured programme gaining the knowledge and skills to be able to join one of our dedicated operational teams at the heart of the business. We are recruiting our engineers for the future, and we are offering a great opportunity for anybody looking to start a career within the water industry. This is a real job with real rewards. You will be learning about new and innovative technologies that will improve the way we work at Thames Water for years to come.
During the apprenticeship you will carry out following activities:
Work on various pumps and associated control gear, 3-phase motors, starters, and controls
Investigating and diagnosing complex faults and carrying out repairs during incidents
Investigating plant failures and carrying out repairs as quickly and efficiently as possible.
Planned preventative and general maintenance of equipment
We are offering training, qualifications, real life experience and the opportunity to "Earn while you learn". This is a real job with real rewards. This is a great opportunity to learn the essential skills that are already in high demand across the industry and will set you on the path to your future career.Training:You will complete the Level 3 Maintenance Operations Engineering Technician Apprenticeship Standard – Mechanical Pathway. Included in the blended learning programme you will also complete the Level 3 City & Guilds Diploma in Engineering.
We work in partnership with Basingstoke College of Technology who deliver the programme, you will be expected to attend the campus in Basingstoke on fortnightly basis with the alternate week being virtual delivery, you may also be expected to attend college on block release, we will support your attendance by paying for your accommodation and travel expenses in line with our business expense policy. Training Outcome:Permanent position.Employer Description:At Thames Water, our purpose is crystal clear - to deliver life’s essential service so our customers, communities and planet can thrive.
Water is life’s great leveller. Every living thing needs it, every single day. From people to plants, birds to bees, farms to factories, we all need it to thrive, and we’re committed to taking care of it for us all.
But keeping water flowing is becoming harder. From scorching summers to wetter winters, extreme weather affects everything from our pipes to our local rivers. We must keep millions more kettles boiling, public services operating, washing machines spinning, showers running and more, so every drop is more precious than ever. Are you ready to play your part?Working Hours :Start time 7.30am when onsite. Hours will vary when attending training or college.
Exact days and shift times to be confirmed.Skills: Communication skills,Team working,Well organised,Dedication to succeed,Logical thinker....Read more...
This role will require the applicant to undergo a college placement either on block or day release
Finish the set work from college and self, with guided help from higher management to complete.
Applicant is requiring arranging self-transport to and from work and college.
Report directly to Engineering team management.
Work as part of a team.
Assist with machine engineering designs and build.
Work closely with the electrical and mechanical teams with design and builds for machinery for steel plants
Work as part of the maintenance team at the refractory site.
Work with maintenance for PPM and reactive repairs.
Understand and use technical data and information.
Learn and understand specific production in the steel industry and steel making.
To learn and understand how to work with a safe and professional manor.
Follow and act in company guidelines and rules.
Follow good housekeeping and time management.
Inhouse training and courses, Crane operations, Forklift licence and manual handling.
Training in Welding, Painting and other job specific roles
Other duties that may be required.
Training:An apprenticeship allows you to earn a wage, gain valuable work experience and industry specific competence. You will be expected to work towards the Maintenance and operations engineering technician level 3 apprenticeship standard.
As part of your apprenticeship, and dependent on your prior attainment, you may be required to complete English and mathsFunctional Skills which is an integral part of your apprenticeship. Upon successful completion you will be awarded additional certificates of recognition for these qualifications.Training Outcome:Potential full time employment on completion of the apprenticeship Employer Description:Monocon International Refractories Ltd. are a subsidiary of IFGL Refractories Ltd which is primarily dedicated to the design, development, manufacturing and supply of innovative, high quality products to steelmakers all around the world.
Located in Doncaster, South Yorkshire in the North of England, Monocon has a modern office, research and development centre, refractory manufacturing facility and engineering workshop/complex from which it delivers exceptional service to its direct customers and international network of branches/subsidiaries, agents and distributors.Working Hours :Monday-Friday, hours to be confirmedSkills: Communication skills,Attention to detail,Organisation skills,Problem solving skills,Number skills,Analytical skills,Logical,Team working,Creative,Initiative,Patience,Physical fitness....Read more...
You’ll be placed on a structured programme gaining the knowledge and skills to be able to join one of our dedicated operational teams at the heart of the business. We are recruiting our engineers for the future, and we are offering a great opportunity for anybody looking to start a career within the water industry. This is a real job with real rewards. You will be learning about new and innovative technologies that will improve the way we work at Thames Water for years to come.
During the apprenticeship you will carry out following activities:
Work on various pumps and associated control gear, 3-phase motors, starters, and controls
Investigating and diagnosing complex faults and carrying out repairs during incidents
Investigating plant failures and carrying out repairs as quickly and efficiently as possible.
Planned preventative and general maintenance of equipment
We are offering training, qualifications, real life experience and the opportunity to "Earn while you learn". This is a real job with real rewards. This is a great opportunity to learn the essential skills that are already in high demand across the industry and will set you on the path to your future career.Training:You will complete the Level 3 Maintenance Operations Engineering Technician Apprenticeship Standard – Mechanical Pathway. Included in the blended learning programme you will also complete the Level 3 City & Guilds Diploma in Engineering.
We work in partnership with Basingstoke College of Technology who deliver the programme, you will be expected to attend the campus in Basingstoke on fortnightly basis with the alternate week being virtual delivery, you may also be expected to attend college on block release, we will support your attendance by paying for your accommodation and travel expenses in line with our business expense policy. Training Outcome:Permanent position.Employer Description:At Thames Water, our purpose is crystal clear - to deliver life’s essential service so our customers, communities and planet can thrive.
Water is life’s great leveller. Every living thing needs it, every single day. From people to plants, birds to bees, farms to factories, we all need it to thrive, and we’re committed to taking care of it for us all.
But keeping water flowing is becoming harder. From scorching summers to wetter winters, extreme weather affects everything from our pipes to our local rivers. We must keep millions more kettles boiling, public services operating, washing machines spinning, showers running and more, so every drop is more precious than ever. Are you ready to play your part?Working Hours :Start time 7.30am when onsite. Hours will vary when attending training or college.
Exact days and shift times to be confirmed.Skills: Communication skills,Team working,Well organised,Dedication to succeed,Logical thinker....Read more...
As an Electrical Apprentice, you’ll be helping to fault find and find ways to fix all the electrical issues we have on our sites. You’ll be working on electrical equipment which monitors and controls all aspects of Thames Water’s water and wastewater processes, and how they’re performing across the network.
During the apprenticeship you’ll become qualified to carry out the following activities:
Planned preventative and general maintenance of equipment
Modifying and rewiring, testing, and inspecting
Condition-based monitoring and fault finding within our systems
We are offering training, qualifications, real-life experience and the opportunity to "Earn while you learn". This is a real job with real rewards.
You will be learning about new and innovative technologies that will improve the way we work at Thames Water for years to come. This is a great opportunity to learn the essential skills that are already in high demand across the industry and will set you on the path to your future career. Training:
You will complete the Level 3 Maintenance Operations Engineering Technician Apprenticeship Standard – Electrical Pathway. Included in the programme you will also complete the Level 3 City & Guilds Diploma in Engineering
We work in partnership with Basingstoke College of Technology who deliver the programme, you will be expected to attend the campus in Basingstoke on a fortnightly basis with the alternate week being virtual delivery, you may also be expected to attend college on block release, we will support your attendance by paying for your accommodation and travel expenses in line with our business expense policy
Training Outcome:
Permanent position at the company upon completion
Employer Description:At Thames Water, our purpose is crystal clear - to deliver life’s essential service so our customers, communities and planet can thrive.
Water is life’s great leveller. Every living thing needs it, every single day. From people to plants, birds to bees, farms to factories, we all need it to thrive, and we’re committed to taking care of it for us all.
But keeping water flowing is becoming harder. From scorching summers to wetter winters, extreme weather affects everything from our pipes to our local rivers. We must keep millions more kettles boiling, public services operating, washing machines spinning, showers running and more, so every drop is more precious than ever. Are you ready to play your part?Working Hours :Monday to Friday.
Start time: 7.30am when onsite (Shifts to be confirmed).Skills: Communication skills,Drive and motivation,Dedication to succeed,Logical thinker,Well organised....Read more...
As an Electrical Apprentice, you’ll be helping to fault find and find ways to fix all the electrical issues we have on our sites. You’ll be working on electrical equipment which monitors and controls all aspects of Thames Water’s water and wastewater processes, and how they’re performing across the network.
During the apprenticeship you’ll become qualified to carry out the following activities:
Planned preventative and general maintenance of equipment
Modifying and rewiring, testing, and inspecting
Condition-based monitoring and fault finding within our systems
We are offering training, qualifications, real-life experience and the opportunity to "Earn while you learn". This is a real job with real rewards.
You will be learning about new and innovative technologies that will improve the way we work at Thames Water for years to come. This is a great opportunity to learn the essential skills that are already in high demand across the industry and will set you on the path to your future career. Training:
You will complete the Level 3 Maintenance Operations Engineering Technician Apprenticeship Standard – Electrical Pathway. Included in the programme you will also complete the Level 3 City & Guilds Diploma in Engineering
We work in partnership with Basingstoke College of Technology who deliver the programme, you will be expected to attend the campus in Basingstoke on a fortnightly basis with the alternate week being virtual delivery, you may also be expected to attend college on block release, we will support your attendance by paying for your accommodation and travel expenses in line with our business expense policy
Training Outcome:
Permanent position at the company upon completion
Employer Description:At Thames Water, our purpose is crystal clear - to deliver life’s essential service so our customers, communities and planet can thrive.
Water is life’s great leveller. Every living thing needs it, every single day. From people to plants, birds to bees, farms to factories, we all need it to thrive, and we’re committed to taking care of it for us all.
But keeping water flowing is becoming harder. From scorching summers to wetter winters, extreme weather affects everything from our pipes to our local rivers. We must keep millions more kettles boiling, public services operating, washing machines spinning, showers running and more, so every drop is more precious than ever. Are you ready to play your part?Working Hours :Monday to Friday.
Start time: 7.30am when onsite (Shifts to be confirmed).Skills: Communication skills,Drive and motivation,Dedication to succeed,Logical thinker,Well organised....Read more...
