Key activities of this role will include the following:
Pressure testing of ceramic barrels- understand expected pressure, record results
Tensile testing- crush testing and pull testing of ceramic barrels, fuse assemblies and general sub-assemblies
Thermal shock- heating of ceramic barrels and controlled placement into cold water and dye penetration testing to review microscopic cracks in ceramic
Set up, assembly and operation of electrical tests to validate the operation of a fuse. Each of the above tests require a formal report to be written in MS Word that can be circulated to internal and external stakeholders
Understand and utilise various pieces of electrical/ electronic equipment including volt meters, current meters, current sensors, thermocouples and electronic thermometers
Understanding technical standards
Reading and understanding technical drawings generated with AutoCAD
Cleaning, preventive maintenance and assistance with repair of all test equipment
Use of MS Excel to record data and control of documents such as calibration
Training:
This is a full-time role based in our Ponteland site
There will be a requirement to travel to TDR in Longbenton to study the BTec day release and practical training
This role reports to the R&D Manager and will work closely with R&D Engineers including Materials, Mechanical and Electrical Engineers
The role will be to assist the R&D team to implement product roadmap strategies and technical support for internal teams in UK and India
Training Outcome:
Upon successful completion of this Level 3 apprenticeship the candidate will be a time served test technician
Employer Description:Based in Ponteland, Lawson Fuses specialises in the design, development and manufacturing of low voltage, High-Rupturing Capacity (HRC) fuse links and fuse holders. Sold direct and via distributors, applications include electric /electronic capital equipment, utilities, renewable energy and domestic households.
Job Context:
Incorporated in 1938, LFL is an established British and global brand that operates in the fuse gear market with a focus on design, development and manufacture of low voltage High Rupture Capacity (HRC) fuse-links and associated fuse holders. LFL’s products are ASTA certified and comply with IEC/BS/ENA standards and accepted throughout the world. With manufacturing facilities based in UK and India, LFL’s global clientele is spread across several countries including (not limited to) UK, Middle East, Africa, India, Malaysia, Australia, South Korea and Hong Kong. With ISO 17025 ASTA certified R&D lab and ASTA certified manufacturing plants, LFL is keen on safety, quality and speed of product delivery. From 2018, LFL is part of Lucy Group which is a diversified international group head quartered in Oxford, UK and operates in multiple sectors including Power Distribution, Smart Lighting, Fuse Gear and Real Estate.
Lawson Fuses under the banner of Lucy Group is focusing on accelerated growth of its product line and subsequently the share of the market. The role of PDM will be directly influencing the vision of the business.Working Hours :Monday to Thursday
8:30am to 5pm
Friday
8:30am to 1:30pmSkills: Communication skills,IT skills,Attention to detail,Organisation skills,Problem solving skills,Presentation skills,Administrative skills,Number skills,Analytical skills,Logical,Team working,Initiative,Patience....Read more...
Please submit your CV and a supplementary document covering the criteria below. Failure to provide this additional document may limit the progression of your application.
Please state from any of the subjects you are/have studied, which interests you the most and give a brief description of any relevant and interesting projects you have completed?
Please tell us about your interests and hobbies, giving details of positions of responsibility, achievements and any public duties undertaken, indicating where you believe your hobbies have equipped you with additional skills that will enable you to succeed within the job applied for?
Please tell us why you are seeking an apprenticeship? Why you are interested in engineering and what are the key areas that interest you?
In these roles, you will either work within Laboratory Operations (testing) or Prototype and there are 3 different positions available.
UK Prototype – Machinist: in our UK Prototype division, you will be responsible for the following:
Manufacture of basic and complex components directly from engineering drawings with a problem-solving approach, using a range of manufacturing methods and equipment
Creation and development of CNC programs and methods of manufacture
Interpreting and understand complex engineering drawings and the application of geometrical tolerancing
Creation and development of documented procedures while following best practice
Obtaining an advanced understanding of various metrology methods and their respective impacts on manufacturing processes
Engaging in and complying with HSE standards, policies, procedures, and regulations
UK Prototype – Metrology: As a Metrology apprentice within our UK Prototype division, you will be responsible for the following:
Executing measurement requirements from basic to complex, using a variety of tools, equipment, instrumentation, and software programs, while making informed decisions on processes and timescales
Utilising logical approaches, functional risk assessments, and critical-thinking skills to solve problems for various part types and industries
Accessing and interpreting information and documentation such as data, manuals, specifications, catalogues, calibration certificates, and computer-generated information to support the measurement process
Taking action when non-conforming tools, equipment, instrumentation, materials, and software programs are identified, highlighting risks to stakeholders and advising on resolution plans using data-driven approaches
Retrieving, analysing, interpreting, validating, and recording measurement results and data in accordance with specifications and engineering principles
Driving continuous improvement in measurement and manufacturing within engineering and manufacturing environments, while complying with relevant Health and Safety legislation, regulations, standards, and organisational policies
Laboratory Operations - Mechanical Technician: As a Technician in our Laboratory Operations function, you will be responsible for the following:
Performing standard and non-standard turbocharger tests, including setting up on test engines and in test cells
Collaborating with engineers to determine the best testing approaches and developing complex test programsBuilding prototype turbochargers and machining non-standard prototype parts
Producing and assessing test data for quality before handing it over to the engineering team
Conducting detailed disassembly and inspection of tested components, and routine maintenance of test cells and engine beds
Engaging in and complying with Health, Safety, and Environmental (HSE) standards, policies, procedures, and regulations
Training:Engineering Fitter Level 3 Apprenticeship Standard:
To be successful in this role you will need the following:
Genuine enthusiasm for developing a career in your chosen field, demonstrating self-motivation and alignment with our business values
Strong teamwork skills with the ability to plan and organize time effectively
5 GCSEs Grade A*-C (level 4-9), including English language and a Science/Technology subject
Mathematics GCSE Grade B or above (Level 5-9 equivalent)
Training Outcome:
Possibility of a potential permanent employment through open vacancies
Employer Description:Cummins Turbo Technologies is the only manufacturer focused solely on medium- to heavy-duty diesel engine turbo technologies. For more than 60 years, we have delivered innovative, reliable turbocharger solutions for our customers. Our vision for turbocharger solutions, thanks to our rich company heritage derived from our Holset® brand, sets us apart as a technology leader.Working Hours :The working hours are 8.30am/4.30pm in college time. The working hours vary when on site dependent on the department to which you are aligned, however start time will be no earlier than 7am and finish time 3.30pm with a lunchtime finish on a Friday.Skills: Communication skills,Attention to detail,Organisation skills,Problem solving skills,Number skills,Analytical skills,Team working....Read more...
Why Choose an Engineering Technician Apprenticeship with Samuel Heath?
We are excited to open the application for our Manufacturing Engineering Apprenticeship program. This role is a vital part of the business and presents a unique opportunity to build a career in manufacturing engineering. The successful candidate will work within the research and development department, gaining hands-on experience in a state-of-the-art facility equipped with five-axis machining centres, advanced 3D printers for engineering applications, CNC lathes (including sliding head systems), metrology equipment and digital CAD/CAM tools.
You will be mentored by a team of experts on their field who will be there supporting you as you build your career path.
Joining a company with a unique heritage and a strong commitment to innovation, your ideas and contributions will be valued and celebrated.
During the program, you will receive comprehensive training, including safe operation and programming of our CNC machines, as well as instruction on traditional machine tools, metrology, additive manufacturing, and digital CAD/CAM tools.
What will you be doing?
Attention to detail is paramount, with each product carefully assembled, inspected, and packed by skilled professionals. All these processes are carried out at our Birmingham factory, ensuring complete control over manufacturing, quality, and environmental responsibility.
Toolmaking is a vital part of the company, supporting key areas by designing, manufacturing, developing and maintaining bespoke tooling for prototyping and production. This role also involves producing small batches of components. Toolmakers collaborate closely with both the design and production teams to ensure the efficient and high-standard turnaround of tooling, supporting new product introductions as well as existing products.
This is workshop-based role. Job duties include but not confined to:
Design, manufacture and development of a range of tooling such as: press tools, stamping dies, soft jaws, jigging and fixturing, and special purpose machinery.
Maintenance and improvement of existing tooling.
Setting and programming of CNC machinery for small batch and development purposes
Using conventional toolroom and CNC machining techniques to manufacture components
Production of one-off specials to a high standard
Design for additive manufacturing and operation of various 3D printers
Involvement in Continuous Improvement and Lean Manufacturing initiatives
Any other duties that may from time to time be reasonably expected
Make UK reserve the right to close this advert with no notice, so apply now to avoid disappointment.Training:Together with invaluable commercial and practical experience, you’ll gain several academic and vocational qualifications throughout your time with us, which are fully paid for, including:
Level 2 Diploma in Advanced Manufacturing Engineering (Foundation Competence) – in year 1, in 6 week blocks to include 4 weeks at Make UK and 2 weeks in company
Level 3 Diploma in Advanced Manufacturing Engineering (Development Competence)
Level 3 BTEC Diploma in Advanced Manufacturing Engineering (Development Knowledge)
In house training in line with your requirements.
Training Outcome:
When you complete your apprenticeship, you can expect to be given the opportunity to join the Toolmaking team on a full time, permanent basis.
Employer Description:Established in 1820, Samuel Heath is a British design and manufacturing company with a distinguished legacy of crafting exceptional bathroom fittings and architectural hardware. Our work seamlessly blends time-honoured techniques such as hot stamping (hot forging), hand polishing, and plating with the latest manufacturing technologies, including CNC machining. By choosing to serve your apprentice with us, we offer you the opportunity to develop and learn in a company who is committed to shape future engineers and promote British craftmanship.Working Hours :When at Samuel Heath: Monday - Thursday, 7:00am - 3:30pm. Friday, 7:00am - 12:00pm.Skills: Communication skills,Attention to detail,Organisation skills,Problem solving skills,Analytical skills,Logical,Creative,Initiative,Non judgemental,Patience....Read more...
