Role Overview
Are you an experienced production technician / operator looking for an exciting new job opportunity?
We are currently looking for multiple Production Technicians and Operators to join a leading Pharmaceutical company based in the Hertfordshire area.
There are multiple vacancies across various production teams including; incoming materials, equipment and machine preparation, material handling/processing, sterile operations, quality control, labelling and packaging.
All production teams work 24/7 and as the Production Technician, you will be on a 4 on 4 off 12 hour shift.
As the Production Technician you will be responsible for the technical aspects of machine set-up and operation/completion of relevant documentation, whilst actively supporting process improvements and adhering to cGMP regulations.
Key Duties and Responsibilities
Your duties as the Production Technician will be varied dependent on which team you join, however the key duties and responsibilities are as follows:
1. To adhere to cGMP and H&S standards, including hygiene, environmental control and safe working practices within the production environment.
2. To ensure that manufacturing equipment is used in compliance with any maintenance, calibration and validation requirements.
3. Help co-ordinate the activities of the section including the liaising with other sections when required.
4. To develop skills which will enable reviews of SOPs, BPRs and related documentation as required by the Team Leader.
Role Requirements
To be successful in your application to this exciting opportunity as the Production Technician we are looking to identify the following on your profile and past history:
1. Have previous work experience in a process or highly regulated industry, for e.g. Pharmaceutical, Chemicals, Food, FMCG, Beverages etc.
2. Experience in setting up and operating automated and semi-automated equipment in compliance with approved procedures.
3. Demonstrated ability to understand and follow SOPs with good attention to detail.
Please note: a driving licence and access to a vehicle is required due to the location of the site.
Hyper Recruitment Solutions Ltd (HRS) is an Equal Opportunities employer. We welcome applications from anyone who meets the role requirements. HRS exclusively supports the STEM sectors, combining recruitment expertise with scientific knowledge to help you advance your career.....Read more...
Servicing - working to manufacturer servicing guidelines to ensure the vehicle running at optimum performance
Maintenance - replacing parts that have wear and tear before they fail
Repair - diagnosing the reason for vehicle failure and fixing the problem
Shadowing qualified Kia Technicians in the workshop to understand and learn how to carefully service and diagnose repair/faults for customer vehicles
Training:Motor vehicle Service and Maintenance Technician - Light VehicleLevel 3 Apprenticeship Standard:
The Kia Apprenticeship Programme operates using a 12-week cycle. Within each 12-week period, Apprentices will receive the following teaching learning and assessment:
One college block attendance with teaching delivered by dedicated Tutors (both via Virtual Classroom Training and face to face at the Kia Academy in Derby)
One workplace visit face to face with their dedicated Skills Coach
One tripartite progress review involving the Apprentice, Skills Coach and their workplace mentor
One 1:1 teaching session with their dedicated Skills Coach via virtual classroom
Please note, that accommodation is provided to apprentices travelling to the Academy for training. Training Outcome:
A full-time career within the automotive industry with many opportunities to progress to positions of responsibility including a Service Manager, Master Technician and Dealership Principles
The opportunities are endless
By having a highly regarded set of skills, Apprentices can go on to develop their careers within the specific interests they may have
Employer Description:The Acorn Apprenticeship Programme is the perfect opportunity to kick start your career in the automotive industry. You'll be working alongside a great team, receive all the support and guidance you need as well as becoming a valued member of the Acorn family.
At Acorn Motor Group, we have a deep passion for providing quality service to our customers as well as creating a warm, friendly working atmosphere that helps us to deliver results of the highest standard. Our family orientated ethos creates an environment that invites our employees to push for excellence, develop and maintain quality customer relationships whilst also imploring forward thinking ideas, creativity and taking initiative.Working Hours :Monday - Friday, with some Saturdays required. Shifts to be confirmed.Skills: Communication skills,Attention to detail,Organisation skills,Customer care skills,Problem solving skills,Team working....Read more...
Assisting with maintenance tasks of plant and equipment, offering opinions and solutions within your teams
Assist teams with routine inspections of equipment and tools.
Supporting the delivery of key operations/engineering initiatives
Assist in the delivery of Quality Critical PM and HACCP schedules
Flexibility to work in all areas of the engineering/production department
Attend meetings, briefings and shift handovers
Develop the knowledge and skills needed to comply with all aspects of maintenance best practice
Work within health and safety legislation and demonstrate safe working practices
Work towards the departments targets to improve downtime, line/factory efficiency and maintenance expenditure
Training:
Mechatronics Maintenance Technician Level 3 Apprenticeship Standard
Telford College day release (Thursday-Friday)
Training Outcome:
Potential future progression
Employer Description:Müller UK & Ireland is wholly owned by the Unternehmensgruppe Theo Müller which employs over 24,000 people throughout Europe. In the UK, Müller develops, manufactures and markets a wide range of branded and private label dairy products made with milk from more than 1,700 British farmers. The Müller brand is ranked at No.7 in The Grocer’s Top 100 list of Britain’s Biggest Brands, and is also the 7th most chosen brand in the UK.Working Hours :Shifts and patterns yet to be confirmed.Skills: Communication skills,Attention to detail,Organisation skills,Customer care skills,Problem solving skills,Number skills,Analytical skills,Logical,Team working,Creative,Initiative,Non judgemental,Patience,Physical fitness....Read more...
Beer Dispense Technician, Iconic London Brewery & Taproom, Up to £35,000, London My client is one of the most local BEER brands in the capital. This brand offers a fantastic range of products, a culture like no other and boasts a fantastic foothold across London. This company has a state of the art brewery, a flare for music and multiple awards under their belt.This company on a mission to elevate the bar experience, uniting people through quality drinks, unforgettable venues, and exceptional service. From their state-of-the-art facilities, they are creating a world of great beverages and memorable experiences built around passion, quality, and innovation.Company Benefits
Opportunities for training and development.Company incentive programs.Discounts at our venues.Opportunities to be part of exciting events and shows.
Beer Dispense Technician responsibilities include:
Install, service, and maintain beverage dispense equipment and gas systems to a high standard.Complete service calls promptly and professionally.Champion quality by adhering to quality control and assurance standards.Collaborate closely with the sales team to ensure excellent customer service.Ensure that equipment is always in top working order for seamless operations.Train and support both internal staff and clients on equipment use and maintenance.Manage inventory, including purchasing and regular stock checks.Support events by setting up and maintaining portable bar equipment.Drive and maintain a company vehicle, keeping it clean, stocked, and ready for service calls.Comply with all health and safety regulations and develop an understanding of all relevant technical processes.
The Ideal Beer Dispense Technician:
2+ years of cellar technician or related experience.Full, clean UK driving license.Excellent customer service and communication skills.Strong work ethic and punctuality.Ability to adapt to flexible working hours.Excellent problem-solving skills and ability to work under pressure.
If you are interested in having a chat about this role, please forward updated CV’s to Mark@corecruitment.comCOREcruitment are experts in recruiting for Hospitality, Catering, Leisure, Retail, FM, Property and Construction sectors. We currently have over 1350 live roles across the UK, Middle East, Europe, Africa, North & Central America and South East Asia. To view other great opportunities please check out our website www.corecruitment.com or call us on +44 207 790 2666 for a confidential chat about upcoming opportunities. Likewise, if you are looking to recruit then we would love to hear from you. Follow COREcruitment on your favourite social networks - Facebook, Twitter, LinkedIn and Instagram....Read more...
We are looking for a self-motivated, enthusiastic individual with the desire to work in our business long term as a qualified Catering Service Engineer. Aimed at either new entrants wanting to access the Catering Industry or those with some knowledge and experience who want to build their career as a fully trained Gas Engineer.
What will you be doing?
Working towards the Commercial Catering Equipment Technician, Level 3 Apprenticeship
The broad purpose of the occupation is to install, commission, maintain and repair commercial catering equipment, such as combination ovens, fryers, grills and griddles, cooking ranges, dishwashers, microwave ovens etc. Equipment may be gas or electrical and may involve plumbing and electronic controls.
Throughout the duration of the programme, you will be working to acquire the necessary knowledge, skills and qualifications to perform the following duties:
Conduct servicing of commercial catering equipment in line with manufacturers’ specifications and/or legislation
Undertake fault finding and repairs of commercial catering equipment, for example replacing thermostat or pumps; including use of diagnostic equipment
Install and commission a wide range of commercial catering equipment, for example ovens, grills, fryers, dishwashers, water treatment equipment and ancillary equipment e.g., fly killers, water filtration, preparation equipment
Test and undertake quality assurance checks to verify that the commercial catering equipment is working in accordance with its design specification and current regulations including air quality tests
Decommission and remove redundant catering equipment and leave the overall installation in a safe condition
Safely isolate and lock-off of services (gas, water, electricity); for example, cap off gas supplies to prevent possible escape of gas
Plan work schedule and logistics to meet customers’ requirements and priorities, time management
Interpret specifications, drawings and technical information, for example manuals
Conduct or agree risk assessments and apply method statements to maintain safe working environment
Provide information and guidance to end-users on the correct operation and maintenance of commercial catering equipment
Complete documentation (written or digital) associated with the specified job for example, time sheets, maintenance records, written acceptance of work completed, commissioning sheets
Maintain tools, equipment and Personal Protective Equipment (PPE), including ensuring meters (typically Electric Multi Meter, Ohmmeter, Carbon Dioxide/Monoxide Meter, Flue Gas Analyser – this list is not exhaustive) are in calibrated date
Maintain and safely store stock – consumables and spares
Strong communication with the customer
Report on work completed to office/manager
Training:
Successful apprentices will achieve a Level 3 qualification in Gas Engineering (Commercial Catering Equipment Technician) and relevant commercial ACS qualifications
Training Outcome:
Successful apprentices will become fully qualified and progress into full-time Commercial Catering Equipment Technician
Employer Description:Advance Group is a leading ‘design house’ within the commercial kitchen sector. Established in 1981 we have become one of the UK’s most recognised brands within the market. We are lucky enough to work with some fantastic customers;Working Hours :Monday - Friday, 9.00am - 5.30pm) Shifts TBCSkills: Communication skills,IT skills,Attention to detail,Organisation skills,Customer care skills,Problem solving skills,Analytical skills,Logical,Team working,Initiative,Motivated,Willingness to learn,Passion for Engineering....Read more...
Diagnose, repair, and service a range of vehicles
Perform tasks efficiently with a focus on quality
Develop technical skills in a professional environment
Training:You will be completing the Level 3 Motor Vehicle Service and Maintenance Technician Apprenticeship and attending Newcastle College one day per week.Training Outcome:
Full-time, permanent position upon completion
Employer Description:Established in 1977, Jack Ford Motors have a wealth of experience in the North East motor trade. We have cars for all budgets and if we don’t have what you are looking for on the forecourt, we are sure we can find it for you.Working Hours :Monday to Friday, 8:30 am - 5:00 pm (½ hour lunch break).Skills: Communication skills,Attention to detail,Problem solving skills,Team working....Read more...
Field Service Engineer Birmingham 35,000 – 45,000 + Door to Door + Family feel + Job satisfaction + Company Vehicle + Personal use + Training + Pension + Stability + Work life balance +Immediate start Solidify your career now as a field service engineer with a stable company where you will be appreciated for the long term. Join their supportive team and enjoy a fantastic package, including full training to do your job to the best of your ability. You will have everyday job satisfaction working with a great supportive team, all accompanied by a fantastic package!This company operates in the fire safety solution industry and specializes in high quality services of fire pumps and spriA mechanical engineering background (car mechanics, HGV, LCV considered) * Full driving license * Ability to commute to the Midlands areankler systems. They are currently expanding so they now require a field service engineer to join their tight knit team and help contribute to their consistent workload. Your Role as a field service engineer will include: *Service, maintenance and installations of fire pumps *Full training and support *Field service role around the Midlands area The successful field service engineer will have: * A mechanical engineering background (car mechanics, HGV, LCV considered)* Full driving license* Ability to commute to the Midlands areaKey words: field service engineer, pump engineer, car mechanic, HGV mechanic, HGV engineer, HGV technician, field service technician, LCV engineer, LCV technician, mechanic, service engineer, site engineer, commercial engineer, industrial engineer, electrical engineer, maintenance engineer, multi skilled engineer, electrical mechanical engineer, electro mechanical engineer field engineer, plant engineer, heavy plant engineer, garage equipment engineer, hydraulic engineer, pneumatic engineer Coventry, Birmingham, Manchester, Cheshire, Wolverhampton, Nottingham, Leicestershire, Worcester, Staffordshire, Shropshire Please apply or call Ben on 07537153940 for more information.This vacancy is being advertised by Future Engineering Recruitment Ltd. The services of Future Engineering Recruitment Ltd are that of an Employment Agency.Please visit our website at futureengineer.co.uk to view other positions we are currently handling. Future Engineering Recruitment Ltd can only accept applications from candidates who have a valid legal permit or right to work in the United Kingdom. Potential candidates who do not have this right or permit or are pending an application to obtain this right or permit should not apply as your details will not be processed.We will endeavour to respond to all applicants however due to the sheer volume of response, we can only guarantee that candidates who have been shortlisted will be contacted.....Read more...
Mobile Plant Fitter
Location: Crawley, West Sussex
Salary: £15.00 - £17.50 per hour (DOE) + Excellent Benefits
Job Type: Full-Time,Permanent
The Client:
A renowned company, our client offers services in demolition, skip hire, and plant hire.
The Role:
As a MobilePlant Fitter, you will maintain and repair plant equipment across various sites including London / south-east London.
Responsibilities:
* Perform emergency repairs as needed.
* Conduct regular inspections and maintenance checks.
* Prioritise costs, quality, and safety in all tasks.
* Ensure compliance with health, safety, and environmental regulations.
Requirements:
* Previously worked as a Plant Fitter or in a similar role.
* Background in maintaining and repairing plant equipment.
* Hold a CSCS card.
* Strong communication and analytical skills.
* Valid UK driving licence.
If you have desirable skills and expertise, apply for an excellent opportunity.
Important Information: We endeavour to process your personal data in a fair and transparent manner. In applying for this role, Additional Resources will be acting in your best interest and may contact you in relation to the role, either by email, phone, or text message. For more information see our Privacy Policy on our website. It is important you are aware of your individual rights and the provisions the company has put in place to protect your data. If you would like further information on the policy or GDPR please contact us.
Additional Resources Ltd is an Employment Business and an Employment Agency as defined within The Conduct of Employment Agencies & Employment Businesses Regulations 2003.
Keywords: Plant Fitter, Plant Mechanic, Plant Technician, HGV Fitter, HGV Technician, Heavy Plant Fitter, jobs
....Read more...
Mobile Plant Fitter
Location: Crawley, West Sussex
Salary: £15.00 - £17.50 per hour (DOE) + Excellent Benefits
Job Type: Full-Time,Permanent
The Client:
A renowned company, our client offers services in demolition, skip hire, and plant hire.
The Role:
As a MobilePlant Fitter, you will maintain and repair plant equipment across various sites including London / south-east London.
Responsibilities:
? Perform emergency repairs as needed.
? Conduct regular inspections and maintenance checks.
? Prioritise costs, quality, and safety in all tasks.
? Ensure compliance with health, safety, and environmental regulations.
Requirements:
? Previously worked as a Plant Fitter or in a similar role.
? Background in maintaining and repairing plant equipment.
? Hold a CSCS card.
? Strong communication and analytical skills.
? Valid UK driving licence.
If you have desirable skills and expertise, apply for an excellent opportunity.
Important Information: We endeavour to process your personal data in a fair and transparent manner. In applying for this role, Additional Resources will be acting in your best interest and may contact you in relation to the role, either by email, phone, or text message. For more information see our Privacy Policy on our website. It is important you are aware of your individual rights and the provisions the company has put in place to protect your data. If you would like further information on the policy or GDPR please contact us.
Additional Resources Ltd is an Employment Business and an Employment Agency as defined within The Conduct of Employment Agencies & Employment Businesses Regulations 2003.
Keywords: Plant Fitter, Plant Mechanic, Plant Technician, HGV Fitter, HGV Technician, Heavy Plant Fitter, jobs
....Read more...
As an Apprentice Mechanical Engineer you will be working on all aspects of site maintenance, this will include:
• Maintenance: Perform routine and preventative maintenance, such as replacing faulty parts, cleaning, and minor repairs• Completing emergency maintenance when equipment breaks down• Inspections: Regularly inspect machines, systems, and equipment to identify potential issues• Conducting frequent quality checks on equipment to ensure no maintenance is required• Troubleshooting: Troubleshoot any issues, Identifying and repair faulty equipment • Safety: Check the functionality of safety systems• Ensuring the organisation complies with safety regulations while maintenance takes place• Keeping a record of preventive and emergency maintenance carried out
How you will be supportedFull training and support will be provided by The Growth Company to help you achieve your apprenticeship and reach your full potential in your role.
What will happen nextNew applicants to The Growth Company who meet any basic entry requirements of the role will be contacted within two working days to be invited to meet a member of our team. You will then have the opportunity to find out:• More about this vacancy and any others you are suitable for• Any training you need to complete• What the next steps will be
How you could get there If you would be catching public transport for this role, visit the Journey Planner on www.tfgm.com to see how you would get there and how long it would take.Training:Level 3 Maintenance and operations engineering technician apprenticeship standardTraining Outcome:Possible progression within the company and progression onto the next level apprenticeship.Employer Description:CSG is a leading UK waste management company.
As waste specialists, we help householders and organisations nationwide by offering a complete variety of services ranging from waste collection through to treatment, recovery and disposal of countless waste streams. We specialise in waste treatment and recovery.Working Hours :8:00 am – 4:30 pm Monday to FridaySkills: Communication skills,Attention to detail,Organisation skills,Team working,Good practical skills,Keen to learn,Enthusiastic,Self-motivated,Presentable,Dependable,Good timekeeping,Flexible,Positive attitude....Read more...
As a Maintenance Technician Apprentice you operate in a modern manufacturing environment and be involved in fault finding and repair, planned maintenance and operating the mechanical equipment used to manufacture our products. Other maintenance support roles arise within the function, such as planning, logistics and safety to manage the products through their expected service life.
Specific activities could include:
Fault finding on energised systems - including extra low voltage electrical, hydraulics, pneumatics and power presses.
Programmable Logic Control (PLC) programming support to maintain production processes.
Planned maintenance on mechanical and control production equipment such as extra low voltage electrical, hydraulics, pneumatics and power presses.
Knowing, understanding and carrying out the basic operations of a machine to operate the machine safely and manage risk, set the machine, repair the machine, using common fault-finding techniques.
Knowing, understanding and carrying out the correct use of gauges measuring equipment and recording Statistical Process Control (SPC) data for quality purposes.Training:
An apprenticeship includes regular training with a college or other training organisation. At least 20% of your working hours will be spent training or studying.
Training Outcome:
Approximately 95% of apprentices choose to stay on with us. As a global business there are a world of opportunities – whether you decide to stay in the UK, or explore an overseas role.
Employer Description:At BAE Systems, we provide some of the world’s most advanced, technology-led defence, aerospace and security solutions. We employ a skilled workforce of more than 93,000 people in around 40 countries. Working with customers and local partners, we develop, engineer, manufacture, and support products and systems to deliver military capability, protect national security, and keep critical information and infrastructure secure.Working Hours :Shifts to be confirmed.Skills: Communication skills,Organisation skills,Team working....Read more...
We are currently recruiting for a Test, Survey and Repair Technician.
As a Test , Survey and Repair Technician you will be required To test and inspect various manufactured and bought in products, using the relevant test specification, equipment and processes. In addition, responsible for carrying out surveys on units, diagnosing faults, repairing units and on completion testing to confirm functionality.
Responsibilities of a Test, Surevy and Repair Technician:
- To undertake Test and inspection activities as directed by the Test, Survey and repair Lead.
- To produce documentation in detail to support test results.
- Write in-depth reports detailing failures and defective components.
- To inspect products on completion of testing to ensure the highest quality standards are achieved.
- To provide support to Engineering on prototype equipment and procedures, advising on any specialist test requirements needed.
- To assist other departments on manufacturing process instructions.
- To assist in the survey and repair of returned products
- Use problem solving skill to prove faults.
- Repair of units including wiring, card changing and component level changing on cards.
- Survey of units to establish condition and diagnosing faults.
- Supporting the maintenance and improvement of test equipment.
- Responsible for conducting all work within the company Health and Safety guidelines.
- To undertake a flexible approach to working hours ensuring output and customer requirements are met.
- Undertake other tasks as identified by the business, which are generally in line with the interests and overall development of the Company as a whole.
- Always ensure compliance with the company/department control Procedures.
Qualifications/Key Attributes/Knowledge:
- Hold a qualification in Electrical & Electronics L3 or higher or equivalent experience.
- A good understanding of test practices.
- Experienced with Microsoft Word, Excel and programming.
- Be able to read circuit diagrams and fault find to component level.
- Be able to repair to IPC 620 and 610 standards.
- Be able to interpret and analyse test results.
- Provide advice on testing to the contracts department to allow comprehensive bids to be placed for existing and future work.
- Have in-depth knowledge of electrical/electronic test equipment.
- Understand Quality Control measures.
- Understand ESD procedures.
- Ability to work to tight deadlines.
- Strong written and verbal communication skills.
- A confident and effective problem solver and decision maker whilst working under
-
- Must be self-motivated, team player and able to work on own initiative.
- Can do attitude.
If you have the required skills and wish to be considered for the role then please apply or call Ian at Holt Engineering on 07734406996.
''....Read more...
Apprenticeships 2025 are now open! Start dates are from May to August 2025Apprentice HGV Technician - Ipswich IP3 9RTRemit are proud to be partnered with Volvo Trucks to deliver their HGV Technician apprenticeships. Volvo Trucks has always recognised the value that apprenticeships can bring to the business and each year, they have more than 300 young men and women go through their apprentice scheme and go on to progress further within the company. A Volvo trained apprentice will become a top class asset to their business for years to come.This year, Volvo launched their ‘Women in HGV’ initiative to bust the myth that the automotive sector is just for men and have seen great results in welcoming more women into the business.Are you passionate about trucks, buses and the world of heavy vehicles? Do you have a knack for solving mechanical puzzles and want to turn your passion into a profession?Look no further - Volvo Truck and Bus is seeking enthusiastic individuals to join out team as Apprentice HGV Technicians!Why choose Volvo Truck and Bus?• Industry Leader: Join a globally recognised brand at the forefront of innovation in the commercial vehicle industry.• Cutting-Edge Technology: Work with state-of-the-art Volvo trucks and buses, gaining hands-on experience with the latest technological advancements.• Expert Training: Benefit from a comprehensive apprenticeship program that combines classroom learning and practical on-the-job training Expected apprenticeship duration - 32 monthsApprenticeship level - Advanced Level ApprenticeshipWhat You'll Do:• Assist with repairs that are carried out in accordance with Volvo Standard Times using Volvo Special Tools where appropriate.• Assist in the fault diagnosis process.• Learn and comply with warranty procedures during repairs and with warranty material on completion of a repair.• Assist and work with the parts team to ensure the correct replacement parts are fitted to the vehicles• Learn how to and use Volvo special tools safely and efficiently.• Assist with cleaning the workshop.• Assist with ensuring that the company time recording procedures are complied with and that job cards are completed accurately• Ensure all vehicle defects are reported to workshop Supervisor.• Wear personal protective equipment (PPE) when must be worn.• Attend college courses regularly and achieve the standards required by the course.• Attend any technical or development training that is made availableOn starting your Apprenticeship, you will be provided with full equipment which includes all the tools to help you become a technician. You will work with qualified and experienced Technicians learning how to repair, service, MOT and maintain modern trucks, buses and coaches including hybrid technology… and so much more to learnTraining:Training is delivered in the workplace and on block release to Remit’s Automotive Academy in Derby. There are a total of 16 x 1 week blocks over the 32 month programme. The costs of hotel accommodation, food and travel are met by the employer and there will be no cost to you. You will also receive 1-2-1 support from your Development Coach to help you achieve: • IMI Heavy Vehicle Service and Maintenance Technician Level 3Training Outcome:Training to be provided:Training is delivered in the workplace and on block release at Remit’s dedicated Heavy Vehicle Academy in Derby. Remit Academy is dedicated to Volvo and our apprenticeship programme. There are a total of 18 blocks over the 32 months programme. which are split between virtual classes and days in Derby.The costs for accommodation, food and travel are met by the employer and there will be no cost to you.You will also be assigned a dedicated Development Coach who will give you 1-2-1 support and guidance to help you achieve the following IMI qualifications: As a result, you will receive the following qualification:• Heavy Vehicle Service and Maintenance Technician Level 3• Functional Skills Level 2 in English & math (if required)Block Release at College includes:• Apprenticeship Standard Heavy Vehicle Service and Maintenance Technician - Bus , Coach and HGV• Functional SkillsEmployer Description:The first Volvo truck was born in 1928. Since then, they have grown to become the largest producer of heavy trucks in Europe. Their reliability is renowned. And it’s underpinned by their three core values of quality, safety and environmental care. With a network of over 85 fully equipped Volvo Truck & Bus workshops throughout the UK and Ireland, customers can count on their certified technicians to keep your Volvo truck in optimal condition.Working Hours :Working week:
Monday to Friday
8.30am to 4.30pmSkills: Mechanically minded,Positive,Team working....Read more...
We are looking for a self-motivated, enthusiastic individual with the desire to work in our business long term as a qualified Catering Service Engineer. Aimed at either new entrants wanting to access the Catering Industry or those with some knowledge and experience who want to build their career as a fully trained Gas Engineer. ;
What will you be doing?
Working towards the Commercial Catering Equipment Technician, Level 3 Apprenticeship
The broad purpose of the occupation is to install, commission, maintain and repair commercial catering equipment, such as combination ovens, fryers, grills and griddles, cooking ranges, dishwashers, microwave ovens etc. Equipment may be gas or electrical and may involve plumbing and electronic controls.
Throughout the duration of the programme, you will be working to acquire the necessary knowledge, skills and qualifications to perform the following duties:
Conduct servicing of commercial catering equipment in line with manufacturers’ specifications and/or legislation
Undertake fault finding and repairs of commercial catering equipment, for example replacing thermostat or pumps; including use of diagnostic equipment
Install and commission a wide range of commercial catering equipment, for example ovens, grills, fryers, dishwashers, water treatment equipment and ancillary equipment e.g., fly killers, water filtration, preparation equipment
Test and undertake quality assurance checks to verify that the commercial catering equipment is working in accordance with its design specification and current regulations including air quality tests
Decommission and remove redundant catering equipment and leave the overall installation in a safe condition
Safely isolate and lock-off of services (gas, water, electricity); for example, cap off gas supplies to prevent possible escape of gas
Plan work schedule and logistics to meet customers’ requirements and priorities, time management
Interpret specifications, drawings and technical information, for example manuals
Conduct or agree risk assessments and apply method statements to maintain safe working environment
Provide information and guidance to end-users on the correct operation and maintenance of commercial catering equipment
Complete documentation (written or digital) associated with the specified job for example, time sheets, maintenance records, written acceptance of work completed, commissioning sheets
Maintain tools, equipment and Personal Protective Equipment (PPE), including ensuring meters (typically Electric Multi Meter, Ohmmeter, Carbon Dioxide/Monoxide Meter, Flue Gas Analyser – this list is not exhaustive) are in calibrated date
Maintain and safely store stock – consumables and spares
Strong communication with the customer
Report on work completed to office/manager
Training:Successful apprentices will achieve a Level 3 qualification in Gas Engineering (Commercial Catering Equipment Technician) and relevant commercial ACS qualifications.Training Outcome:Successful apprentices will become fully qualified and progress into full-time Commercial Catering Equipment TechnicianEmployer Description:Advance Group is a leading ‘design house’ within the commercial kitchen sector. Established in 1981 we have become one of the UK’s most recognised brands within the market. We are lucky enough to work with some fantastic market leading customers.Working Hours :Monday - Friday (9:00am - 5:30pm)
Shifts TBCSkills: Communication skills,IT skills,Attention to detail,Organisation skills,Customer care skills,Problem solving skills,Analytical skills,Logical,Team working,Initiative,Motivated,Willingness to learn,Passion for Engineering....Read more...
We are looking for a self-motivated, enthusiastic individual with the desire to work in our business long term as a qualified Catering Service Engineer. Aimed at either new entrants wanting to access the Catering Industry or those with some knowledge and experience who want to build their career as a fully trained Gas Engineer. ;
What will you be doing?
Working towards the Commercial Catering Equipment Technician, Level 3 Apprenticeship
The broad purpose of the occupation is to install, commission, maintain and repair commercial catering equipment, such as combination ovens, fryers, grills and griddles, cooking ranges, dishwashers, microwave ovens etc. Equipment may be gas or electrical and may involve plumbing and electronic controls.
Throughout the duration of the programme, you will be working to acquire the necessary knowledge, skills and qualifications to perform the following duties:
Conduct servicing of commercial catering equipment in line with manufacturers’ specifications and/or legislation
Undertake fault finding and repairs of commercial catering equipment, for example replacing thermostat or pumps; including use of diagnostic equipment
Install and commission a wide range of commercial catering equipment, for example ovens, grills, fryers, dishwashers, water treatment equipment and ancillary equipment e.g., fly killers, water filtration, preparation equipment
Test and undertake quality assurance checks to verify that the commercial catering equipment is working in accordance with its design specification and current regulations including air quality tests
Decommission and remove redundant catering equipment and leave the overall installation in a safe condition
Safely isolate and lock-off of services (gas, water, electricity); for example, cap off gas supplies to prevent possible escape of gas
Plan work schedule and logistics to meet customers’ requirements and priorities, time management
Interpret specifications, drawings and technical information, for example manuals
Conduct or agree risk assessments and apply method statements to maintain safe working environment
Provide information and guidance to end-users on the correct operation and maintenance of commercial catering equipment
Complete documentation (written or digital) associated with the specified job for example, time sheets, maintenance records, written acceptance of work completed, commissioning sheets
Maintain tools, equipment and Personal Protective Equipment (PPE), including ensuring meters (typically Electric Multi Meter, Ohmmeter, Carbon Dioxide/Monoxide Meter, Flue Gas Analyser – this list is not exhaustive) are in calibrated date
Maintain and safely store stock – consumables and spares
Strong communication with the customer
Report on work completed to office/manager
Training:Successful apprentices will achieve a Level 3 qualification in Gas Engineering (Commercial Catering Equipment Technician) and relevant commercial ACS qualifications.Training Outcome:Successful apprentices will become fully qualified and progress into full-time Commercial Catering Equipment TechnicianEmployer Description:Advance Group is a leading ‘design house’ within the commercial kitchen sector. Established in 1981 we have become one of the UK’s most recognised brands within the market. We are lucky enough to work with some fantastic market leading customers.Working Hours :Monday - Friday (9:00am - 5:30pm)
Shifts TBCSkills: Communication skills,IT skills,Attention to detail,Organisation skills,Customer care skills,Problem solving skills,Analytical skills,Logical,Team working,Initiative,Motivated,Willingness to learn,Passion for Engineering....Read more...
We are looking for a self-motivated, enthusiastic individual with the desire to work in our business long term as a qualified Catering Service Engineer. Aimed at either new entrants wanting to access the Catering Industry or those with some knowledge and experience who want to build their career as a fully trained Gas Engineer. ;
What will you be doing?
Working towards the Commercial Catering Equipment Technician, Level 3 Apprenticeship
The broad purpose of the occupation is to install, commission, maintain and repair commercial catering equipment, such as combination ovens, fryers, grills and griddles, cooking ranges, dishwashers, microwave ovens etc. Equipment may be gas or electrical and may involve plumbing and electronic controls.
Throughout the duration of the programme, you will be working to acquire the necessary knowledge, skills and qualifications to perform the following duties:
Conduct servicing of commercial catering equipment in line with manufacturers’ specifications and/or legislation
Undertake fault finding and repairs of commercial catering equipment, for example replacing thermostat or pumps; including use of diagnostic equipment
Install and commission a wide range of commercial catering equipment, for example ovens, grills, fryers, dishwashers, water treatment equipment and ancillary equipment e.g., fly killers, water filtration, preparation equipment
Test and undertake quality assurance checks to verify that the commercial catering equipment is working in accordance with its design specification and current regulations including air quality tests
Decommission and remove redundant catering equipment and leave the overall installation in a safe condition
Safely isolate and lock-off of services (gas, water, electricity); for example, cap off gas supplies to prevent possible escape of gas
Plan work schedule and logistics to meet customers’ requirements and priorities, time management
Interpret specifications, drawings and technical information, for example manuals
Conduct or agree risk assessments and apply method statements to maintain safe working environment
Provide information and guidance to end-users on the correct operation and maintenance of commercial catering equipment
Complete documentation (written or digital) associated with the specified job for example, time sheets, maintenance records, written acceptance of work completed, commissioning sheets
Maintain tools, equipment and Personal Protective Equipment (PPE), including ensuring meters (typically Electric Multi Meter, Ohmmeter, Carbon Dioxide/Monoxide Meter, Flue Gas Analyser – this list is not exhaustive) are in calibrated date
Maintain and safely store stock – consumables and spares
Strong communication with the customer
Report on work completed to office/manager
Training:Successful apprentices will achieve a Level 3 qualification in Gas Engineering (Commercial Catering Equipment Technician) and relevant commercial ACS qualifications.Training Outcome:Successful apprentices will become fully qualified and progress into full-time Commercial Catering Equipment TechnicianEmployer Description:Advance Group is a leading ‘design house’ within the commercial kitchen sector. Established in 1981 we have become one of the UK’s most recognised brands within the market. We are lucky enough to work with some fantastic market leading customers.Working Hours :Monday - Friday (9:00am - 5:30pm)
Shifts TBCSkills: Communication skills,IT skills,Attention to detail,Organisation skills,Customer care skills,Problem solving skills,Analytical skills,Logical,Team working,Initiative,Motivated,Willingness to learn,Passion for Engineering....Read more...
We are looking for a self-motivated, enthusiastic individual with the desire to work in our business long term as a qualified Catering Service Engineer. Aimed at either new entrants wanting to access the Catering Industry or those with some knowledge and experience who want to build their career as a fully trained Gas Engineer. ;
What will you be doing?
Working towards the Commercial Catering Equipment Technician, Level 3 Apprenticeship
The broad purpose of the occupation is to install, commission, maintain and repair commercial catering equipment, such as combination ovens, fryers, grills and griddles, cooking ranges, dishwashers, microwave ovens etc. Equipment may be gas or electrical and may involve plumbing and electronic controls.
Throughout the duration of the programme, you will be working to acquire the necessary knowledge, skills and qualifications to perform the following duties:
Conduct servicing of commercial catering equipment in line with manufacturers’ specifications and/or legislation
Undertake fault finding and repairs of commercial catering equipment, for example replacing thermostat or pumps; including use of diagnostic equipment
Install and commission a wide range of commercial catering equipment, for example ovens, grills, fryers, dishwashers, water treatment equipment and ancillary equipment e.g., fly killers, water filtration, preparation equipment
Test and undertake quality assurance checks to verify that the commercial catering equipment is working in accordance with its design specification and current regulations including air quality tests
Decommission and remove redundant catering equipment and leave the overall installation in a safe condition
Safely isolate and lock-off of services (gas, water, electricity); for example, cap off gas supplies to prevent possible escape of gas
Plan work schedule and logistics to meet customers’ requirements and priorities, time management
Interpret specifications, drawings and technical information, for example manuals
Conduct or agree risk assessments and apply method statements to maintain safe working environment
Provide information and guidance to end-users on the correct operation and maintenance of commercial catering equipment
Complete documentation (written or digital) associated with the specified job for example, time sheets, maintenance records, written acceptance of work completed, commissioning sheets
Maintain tools, equipment and Personal Protective Equipment (PPE), including ensuring meters (typically Electric Multi Meter, Ohmmeter, Carbon Dioxide/Monoxide Meter, Flue Gas Analyser – this list is not exhaustive) are in calibrated date
Maintain and safely store stock – consumables and spares
Strong communication with the customer
Report on work completed to office/manager
Training:Successful apprentices will achieve a Level 3 qualification in Gas Engineering (Commercial Catering Equipment Technician) and relevant commercial ACS qualifications.Training Outcome:Successful apprentices will become fully qualified and progress into full-time Commercial Catering Equipment TechnicianEmployer Description:Advance Group is a leading ‘design house’ within the commercial kitchen sector. Established in 1981 we have become one of the UK’s most recognised brands within the market. We are lucky enough to work with some fantastic market leading customers.Working Hours :Monday - Friday (9:00am - 5:30pm)
Shifts TBCSkills: Communication skills,IT skills,Attention to detail,Organisation skills,Customer care skills,Problem solving skills,Analytical skills,Logical,Team working,Initiative,Motivated,Willingness to learn,Passion for Engineering....Read more...
We are looking for a self-motivated, enthusiastic individual with the desire to work in our business long term as a qualified Catering Service Engineer. Aimed at either new entrants wanting to access the Catering Industry or those with some knowledge and experience who want to build their career as a fully trained Gas Engineer.
What will you be doing?
Working towards the Commercial Catering Equipment Technician, Level 3 Apprenticeship
The broad purpose of the occupation is to install, commission, maintain and repair commercial catering equipment, such as combination ovens, fryers, grills and griddles, cooking ranges, dishwashers, microwave ovens etc. Equipment may be gas or electrical and may involve plumbing and electronic controls.
Throughout the duration of the programme, you will be working to acquire the necessary knowledge, skills and qualifications to perform the following duties:
Conduct servicing of commercial catering equipment in line with manufacturers’ specifications and/or legislation
Undertake fault finding and repairs of commercial catering equipment, for example replacing thermostat or pumps; including use of diagnostic equipment
Install and commission a wide range of commercial catering equipment, for example ovens, grills, fryers, dishwashers, water treatment equipment and ancillary equipment e.g., fly killers, water filtration, preparation equipment
Test and undertake quality assurance checks to verify that the commercial catering equipment is working in accordance with its design specification and current regulations including air quality tests
Decommission and remove redundant catering equipment and leave the overall installation in a safe condition
Safely isolate and lock-off of services (gas, water, electricity); for example, cap off gas supplies to prevent possible escape of gas
Plan work schedule and logistics to meet customers’ requirements and priorities, time management
Interpret specifications, drawings and technical information, for example manuals
Conduct or agree risk assessments and apply method statements to maintain safe working environment
Provide information and guidance to end-users on the correct operation and maintenance of commercial catering equipment
Complete documentation (written or digital) associated with the specified job for example, time sheets, maintenance records, written acceptance of work completed, commissioning sheets
Maintain tools, equipment and Personal Protective Equipment (PPE), including ensuring meters (typically Electric Multi Meter, Ohmmeter, Carbon Dioxide/Monoxide Meter, Flue Gas Analyser – this list is not exhaustive) are in calibrated date
Maintain and safely store stock – consumables and spares
Strong communication with the customer
Report on work completed to office/manager
Training:Successful apprentices will achieve a Level 3 qualification in Gas Engineering (Commercial Catering Equipment Technician) and relevant commercial ACS qualifications.Training Outcome:Successful apprentices will become fully qualified and progress into full-time Commercial Catering Equipment TechnicianEmployer Description:Advance Group is a leading ‘design house’ within the commercial kitchen sector. Established in 1981 we have become one of the UK’s most recognised brands within the market. We are lucky enough to work with some fantastic market leading customers.Working Hours :Monday - Friday (9:00am - 5:30pm)
Shifts TBCSkills: Communication skills,IT skills,Attention to detail,Organisation skills,Customer care skills,Problem solving skills,Analytical skills,Logical,Team working,Initiative,Motivated,Willingness to learn,Passion for Engineering....Read more...
We are looking for a self-motivated, enthusiastic individual with the desire to work in our business long term as a qualified Catering Service Engineer. Aimed at either new entrants wanting to access the Catering Industry or those with some knowledge and experience who want to build their career as a fully trained Gas Engineer. ;
What will you be doing?
Working towards the Commercial Catering Equipment Technician, Level 3 Apprenticeship
The broad purpose of the occupation is to install, commission, maintain and repair commercial catering equipment, such as combination ovens, fryers, grills and griddles, cooking ranges, dishwashers, microwave ovens etc. Equipment may be gas or electrical and may involve plumbing and electronic controls.
Throughout the duration of the programme, you will be working to acquire the necessary knowledge, skills and qualifications to perform the following duties:
Conduct servicing of commercial catering equipment in line with manufacturers’ specifications and/or legislation
Undertake fault finding and repairs of commercial catering equipment, for example replacing thermostat or pumps; including use of diagnostic equipment
Install and commission a wide range of commercial catering equipment, for example ovens, grills, fryers, dishwashers, water treatment equipment and ancillary equipment e.g., fly killers, water filtration, preparation equipment
Test and undertake quality assurance checks to verify that the commercial catering equipment is working in accordance with its design specification and current regulations including air quality tests
Decommission and remove redundant catering equipment and leave the overall installation in a safe condition
Safely isolate and lock-off of services (gas, water, electricity); for example, cap off gas supplies to prevent possible escape of gas
Plan work schedule and logistics to meet customers’ requirements and priorities, time management
Interpret specifications, drawings and technical information, for example manuals
Conduct or agree risk assessments and apply method statements to maintain safe working environment
Provide information and guidance to end-users on the correct operation and maintenance of commercial catering equipment
Complete documentation (written or digital) associated with the specified job for example, time sheets, maintenance records, written acceptance of work completed, commissioning sheets
Maintain tools, equipment and Personal Protective Equipment (PPE), including ensuring meters (typically Electric Multi Meter, Ohmmeter, Carbon Dioxide/Monoxide Meter, Flue Gas Analyser – this list is not exhaustive) are in calibrated date
Maintain and safely store stock – consumables and spares
Strong communication with the customer
Report on work completed to office/manager
Training:Successful apprentices will achieve a Level 3 qualification in Gas Engineering (Commercial Catering Equipment Technician) and relevant commercial ACS qualifications.Training Outcome:Successful apprentices will become fully qualified and progress into full-time Commercial Catering Equipment TechnicianEmployer Description:Advance Group is a leading ‘design house’ within the commercial kitchen sector. Established in 1981 we have become one of the UK’s most recognised brands within the market. We are lucky enough to work with some fantastic market leading customers.Working Hours :Monday - Friday (9:00am - 5:30pm)
Shifts TBCSkills: Communication skills,IT skills,Attention to detail,Organisation skills,Customer care skills,Problem solving skills,Analytical skills,Logical,Team working,Initiative,Motivated,Willingness to learn,Passion for Engineering....Read more...
We are looking for a self-motivated, enthusiastic individual with the desire to work in our business long term as a qualified Catering Service Engineer. Aimed at either new entrants wanting to access the Catering Industry or those with some knowledge and experience who want to build their career as a fully trained Gas Engineer. ;
What will you be doing?
Working towards the Commercial Catering Equipment Technician, Level 3 Apprenticeship
The broad purpose of the occupation is to install, commission, maintain and repair commercial catering equipment, such as combination ovens, fryers, grills and griddles, cooking ranges, dishwashers, microwave ovens etc. Equipment may be gas or electrical and may involve plumbing and electronic controls.
Throughout the duration of the programme, you will be working to acquire the necessary knowledge, skills and qualifications to perform the following duties:
Conduct servicing of commercial catering equipment in line with manufacturers’ specifications and/or legislation
Undertake fault finding and repairs of commercial catering equipment, for example replacing thermostat or pumps; including use of diagnostic equipment
Install and commission a wide range of commercial catering equipment, for example ovens, grills, fryers, dishwashers, water treatment equipment and ancillary equipment e.g., fly killers, water filtration, preparation equipment
Test and undertake quality assurance checks to verify that the commercial catering equipment is working in accordance with its design specification and current regulations including air quality tests
Decommission and remove redundant catering equipment and leave the overall installation in a safe condition
Safely isolate and lock-off of services (gas, water, electricity); for example, cap off gas supplies to prevent possible escape of gas
Plan work schedule and logistics to meet customers’ requirements and priorities, time management
Interpret specifications, drawings and technical information, for example manuals
Conduct or agree risk assessments and apply method statements to maintain safe working environment
Provide information and guidance to end-users on the correct operation and maintenance of commercial catering equipment
Complete documentation (written or digital) associated with the specified job for example, time sheets, maintenance records, written acceptance of work completed, commissioning sheets
Maintain tools, equipment and Personal Protective Equipment (PPE), including ensuring meters (typically Electric Multi Meter, Ohmmeter, Carbon Dioxide/Monoxide Meter, Flue Gas Analyser – this list is not exhaustive) are in calibrated date
Maintain and safely store stock – consumables and spares
Strong communication with the customer
Report on work completed to office/manager
Training:Successful apprentices will achieve a Level 3 qualification in Gas Engineering (Commercial Catering Equipment Technician) and relevant commercial ACS qualifications.Training Outcome:Successful apprentices will become fully qualified and, depending on performance and availability, progress into full-time Commercial Catering Equipment TechnicianEmployer Description:Advance Group is a leading ‘design house’ within the commercial kitchen sector. Established in 1981 we have become one of the UK’s most recognised brands within the market. We are lucky enough to work with some fantastic market leading customers.Working Hours :Monday - Friday (9:00am - 5:30pm)
Shifts TBCSkills: Communication skills,IT skills,Attention to detail,Organisation skills,Customer care skills,Problem solving skills,Analytical skills,Logical,Team working,Initiative,Motivated,Willingness to learn,Passion for Engineering....Read more...
MOT Tester/TechnicianChathamMon – Fri 8:00 – 5:30 (No weekends!)£30,000 - £40,000 + Overtime + Pay Reviews + TrainingAre you an experienced MOT Tester looking for a refreshing change? Join the team at a trusted garage renowned for their wide range of services and unwavering commitment to customer satisfaction.This company is dedicated to providing quality service to vehicles while upholding strong values and focusing on customer needs. The team is passionate about staying ahead in the market, ensuring they always deliver the best to their customers.Key Responsibilities of a Vehicle Technician & MOT Tester with our client:• Conducting MOT tests to the highest standards.• Diagnosing and repairing a wide range of vehicles.• Performing routine maintenance and servicing.• Ensuring all work is completed efficiently and to a high standard.• Providing exceptional customer service and maintaining a professional attitude.Requirements of the Vehicle Technician & MOT Tester Role:• Fully qualified Vehicle Technician.• MOT Tester certification • Proven experience in vehicle repairs.• Strong attention to detail and problem-solving skills.• Excellent communication skills and a customer-focused approach.• Ability to work independently and as part of a team.Benefits:Competitive salary based on experience plus pay reviews and overtime at 1.5xWeekday schedule with no weekend workOpportunities for career growth and developmentSupportive team environment with a focus on work-life balanceWestin Par values diversity and promotes equality. No terminology in this advert is intended to discriminate against any of the protected characteristics that fall under the Equality Act 2010.Candidates must be eligible to live and work in the UK. For the purposes of the Conduct Regulations 2003, when advertising permanent vacancies, we are acting as an Employment AgencyDue to the high volume of applicants applying for all roles, we can only reply to candidates with the most relevant skills and experience. If you have not heard back from us within 48 hours of your application, please assume that you have been unsuccessful on this occasion.Do not hesitate to contact us about this or any other roles.....Read more...
MOT Tester/TechnicianChathamMon – Fri 8:00 – 5:30 (No weekends!)£30,000 - £40,000 + Overtime + Pay Reviews + TrainingAre you an experienced MOT Tester looking for a refreshing change? Join the team at a trusted garage renowned for their wide range of services and unwavering commitment to customer satisfaction.This company is dedicated to providing quality service to vehicles while upholding strong values and focusing on customer needs. The team is passionate about staying ahead in the market, ensuring they always deliver the best to their customers.Key Responsibilities of a Vehicle Technician & MOT Tester with our client:• Conducting MOT tests to the highest standards.• Diagnosing and repairing a wide range of vehicles.• Performing routine maintenance and servicing.• Ensuring all work is completed efficiently and to a high standard.• Providing exceptional customer service and maintaining a professional attitude.Requirements of the Vehicle Technician & MOT Tester Role:• Fully qualified Vehicle Technician.• MOT Tester certification • Proven experience in vehicle repairs.• Strong attention to detail and problem-solving skills.• Excellent communication skills and a customer-focused approach.• Ability to work independently and as part of a team.Benefits:Competitive salary based on experience plus pay reviews and overtime at 1.5xWeekday schedule with no weekend workOpportunities for career growth and developmentSupportive team environment with a focus on work-life balanceWestin Par values diversity and promotes equality. No terminology in this advert is intended to discriminate against any of the protected characteristics that fall under the Equality Act 2010.Candidates must be eligible to live and work in the UK. For the purposes of the Conduct Regulations 2003, when advertising permanent vacancies, we are acting as an Employment AgencyDue to the high volume of applicants applying for all roles, we can only reply to candidates with the most relevant skills and experience. If you have not heard back from us within 48 hours of your application, please assume that you have been unsuccessful on this occasion.Do not hesitate to contact us about this or any other roles.....Read more...
Remit are proud to be partnered with Skills Group to deliver their HGV Technician apprenticeships.
If you have an interest in the motor industry and want to work in a hands-on role where you can problem-solve and make a real contribution as part of a team, this apprenticeship is the perfect place to start!
Work alongside a qualified Technician to learn how to carry out repairs in a safe and responsible manne
Be trained on how to service, maintain and repair PCV vehicles
Learn the fundamentals of heavy vehicle technologies – heavy vehicle chassis, engine, fuels, transmissions, hydraulic and air braking, electrical systems, and testing
Be taught how to setup accessories and specific equipment on the vehicles
Ensure appropriate work logs are kept for all vehicles, and all job cards and service sheets are completed in a timely manner
Keep high levels of morale and focus to ensure the highest possible levels of productive efficiency, quality of workmanship, and production finish in order to sustain growth in customer confidence in the service provided
Training:Training is delivered in the workplace and on block release to Remit’s Automotive Academy in Derby. There are a total of 18 x 1 week blocks over the 32 month programme. The costs of hotel accommodation, food and travel are met by the employer and there will be no cost to you.
You will also receive 1-2-1 support from your Development Coach to help you achieve:
IMI Heavy Vehicle Service and Maintenance Technician Level 3
Functional Skills Level 2 in English & Maths (if required)
Training Outcome:Upon successful completion of the apprenticeship, you will achieve an automotive industry recognised qualification. After this, we will continue to invest in your future, by providing training and development opportunities so you can excel in your role and further your skills and experience as a fully qualified Technician.Employer Description:With over 105 years of experience, the Skills Group is proud to be a family-run business in the heart of Nottinghamshire, providing a range of award-winning coach holidays, specialised private hire and group travel.Working Hours :Monday - Friday, times to be confirmed.Skills: Enthusiasm to learn,Mechanically minded....Read more...
Servicing - working to manufacturer servicing guidelines to ensure the vehicle running at optimum performance
Maintenance - replacing parts that have wear and tear before they fail
Repair - diagnosing the reason for vehicle failure and fixing the problem
Shadowing qualified Kia Technicians in the workshop to understand and learn how to carefully service and diagnose repair/faults for customer vehicles
Training:This apprenticeship will be geared towards completion of the Level 3 Motor vehicle service and maintenance technician - light vehicle apprenticeship standard, including Functional Skills in English and maths if required.
The Kia Apprenticeship Programme operates using a 12-week cycle. Within each 12-week period, Apprentices will receive the following teaching learning and assessment:
One college block attendance with teaching delivered by dedicated Tutors (both via Virtual Classroom Training and face to face at the Kia Academy in Derby)
One workplace visit face to face with their dedicated Skills Coach
One tripartite progress review involving the Apprentice, Skills Coach and their workplace mentor
One 1:1 teaching session with their dedicated Skills Coach via virtual classroom
Please note, that accomodation is provided to apprentices travelling to the Academy for training. Training Outcome:
For the right candidate, a full-time career within the automotive industry may be available, with many opportunities to progress to positions of responsibility including a Service Manager, Master Technician and Dealership Principles.
The opportunities are endless. By having a highly regarded set of skills, Apprentices can go on to develop their careers within the specific interests they may have.
Employer Description:Established in 1967, the RRG Group has expanded to become one of the largest and most successful dealer groups in the north of England. Today, our wide network of showrooms includes RRG Kia Bury, near Manchester, and we are proud to serve loyal customers from across the north-west and west Yorkshire regions.
At our Kia Bury showroom, you’ll discover the full range of new models from the South Korean carmaker. We are a trusted Kia partner, so quality is guaranteed.Working Hours :Monday - Friday, with some Saturdays required. Shifts to be confirmed.Skills: Communication skills,Attention to detail,Organisation skills,Customer care skills,Problem solving skills,Team working....Read more...
Apprenticeships 2025 are now open! Start dates are from May to August 2025Apprentice HGV Technician - Wilstead, Bedford MK45 3PDRemit are proud to be partnered with Volvo Trucks to deliver their HGV Technician apprenticeships. Volvo Trucks has always recognised the value that apprenticeships can bring to the business and each year, they have more than 300 young men and women go through their apprentice scheme and go on to progress further within the company. A Volvo-trained apprentice will become a top-class asset to their business for years to come.This year, Volvo launched their ‘Women in HGV’ initiative to bust the myth that the automotive sector is just for men and have seen great results in welcoming more women into the business.Are you passionate about trucks, buses and the world of heavy vehicles? Do you have a knack for solving mechanical puzzles and want to turn your passion into a profession?Look no further - Volvo Truck and Bus is seeking enthusiastic individuals to join our team as Apprentice HGV Technicians!Why choose Volvo Truck and Bus?• Industry Leader: Join a globally recognised brand at the forefront of innovation in the commercial vehicle industry• Cutting-Edge Technology: Work with state-of-the-art Volvo trucks and buses, gaining hands-on experience with the latest technological advancements• Expert Training: Benefit from a comprehensive apprenticeship program that combines classroom learning and practical on-the-job training Expected apprenticeship duration - 32 monthsApprenticeship level - Advanced Level ApprenticeshipWhat You'll Do:• Assist with repairs that are carried out in accordance with Volvo Standard Times using Volvo Special Tools where appropriate• Assist in the fault diagnosis process• Learn and comply with warranty procedures during repairs and with warranty material on completion of a repair• Assist and work with the parts team to ensure the correct replacement parts are fitted to the vehicles• Learn how to and use Volvo special tools safely and efficiently.• Assist with cleaning the workshop• Assist with ensuring that the company time recording procedures are complied with and that job cards are completed accurately• Ensure all vehicle defects are reported to Workshop Supervisor• Wear personal protective equipment (PPE) when must be worn• Attend college courses regularly and achieve the standards required by the course• Attend any technical or development training that is made availableOn starting your apprenticeship, you will be provided with full equipment which includes all the tools to help you become a technician. You will work with qualified and experienced Technicians learning how to repair, service, MOT and maintain modern trucks, buses and coaches including hybrid technology… and so much more to learnTraining:Training is delivered in the workplace and on block release to Remit’s Automotive Academy in Derby. There are a total of 16 x 1 week blocks over the 32 month programme. The costs of hotel accommodation, food and travel are met by the employer and there will be no cost to you. You will also receive 1-2-1 support from your Development Coach to help you achieve: • IMI Heavy Vehicle Service and Maintenance Technician Level 3Training Outcome:Training to be provided:
Training is delivered in the workplace and on block release at Remit’s dedicated Heavy Vehicle Academy in Derby. Remit Academy is dedicated to Volvo and our apprenticeship programme. There are a total of 18 blocks over the 32 months programme. which are split between virtual classes and days in Derby.The costs for accommodation, food and travel are met by the employer and there will be no cost to you.You will also be assigned a dedicated Development Coach who will give you 1-2-1 support and guidance to help you achieve the following IMI qualifications: As a result, you will receive the following qualifications:• Heavy Vehicle Service and Maintenance Technician Level 3• Functional Skills Level 2 in English & math (if required)Block Release at College includes:• Apprenticeship Standard Heavy Vehicle Service and Maintenance Technician - Bus, Coach and HGV• Functional SkillsEmployer Description:The first Volvo truck was born in 1928. Since then, they have grown to become the largest producer of heavy trucks in Europe. Their reliability is renowned. And it’s underpinned by their three core values of quality, safety and environmental care. With a network of over 85 fully equipped Volvo Truck & Bus workshops throughout the UK and Ireland, customers can count on their certified technicians to keep your Volvo truck in optimal condition.Working Hours :Working week: Monday to Friday 0830hrs to 1630hrs.Skills: Mechanically minded,Passionate,Team working....Read more...
