Mobile Plant Fitter
Hours: 40 per week (MondayFriday)
Salary: £42,000 £49,000 DOE + van & D2D pay
Employment Type: Full-time, Permanent
An established plant hire company is seeking a skilled Mobile Plant Fitter to join their busy team. This role offers consistent weekday hours with overtime available and the chance to work on a variety of heavy plant machinery in a professional and supportive setting.
Main Duties:
- Service, maintain, and repair heavy plant equipment, including excavators, dozers, dumpers, and diggers.
- Identify mechanical, hydraulic, and electrical faults and carry out timely repairs.
- Accurately complete job cards, service records, and associated documentation.
- Work independently on-site or collaboratively within the workshop team.
Candidate Requirements:
- Proven experience as a Plant Fitter, Heavy Plant Engineer, or Plant Mechanic.
- Strong understanding of hydraulics, diesel engines, and electrical systems.
- NVQ/City & Guilds Level 3 in Mechanical, Plant, or Agricultural Engineering, or equivalent experience.
- Confident fault diagnosis and problem-solving skills.
- Full UK driving licence.
Benefits:
- MondayFriday, 40-hour workweek
- Paid overtime opportunities
- Ongoing training and professional development
- Company van with fuel card and paid travel
- Secure long-term position with a reputable plant hire company
Please hit apply or reach out to Pete for further information - 07485986178 / peter@holtautomotive.co.uk....Read more...
Cleanroom Production Technician required to join a precision aerospace production team to work in a cleanroom environment on the assembly, integration and testing of aerospace devices.
Our international Aerospace and Defence client is going through a continued period of expansion and looking for Precision Mechanical Assembly Technicians. The ideal candidate will have experience as a Mechanical fitter experience ideally through apprenticeship with exposure to and of the following: non return valves, flow control valves, solenoid valves, cold gas thrusters or any fluidic components for the space industry.
Training and skills development will be provided, extended working hours may be required to meet production targets.
Responsibilities
Precision assembly and test activities in a Class 8 clean room.
Testing the integrity of assembled systems using high pressure gases and leak detection equipment such as helium mass spectrometers.
Cleaning components in preparation for assembly and test activities using automatic particle counting equipment and patch sample counting techniques.
Electrical testing
Gas flow testing of valves, thrusters and fluidic components to ensure components are within
tolerance prior to assembly.
Digital voltmeters, oscilloscopes, data acquisition systems, high voltage dielectric and insulation
resistance test equipment.
Material joining processes including manual TIG (Tungsten Inert Gas) welding, orbital welding, and compiling weld inspection reports on parts and test pieces.....Read more...
Cleanroom Production Technician required to join a precision aerospace production team to work in a cleanroom environment on the assembly, integration and testing of aerospace devices.
Our international Aerospace and Defence client is going through a continued period of expansion and looking for Precision Mechanical Assembly Technicians. The ideal candidate will have experience as a Mechanical fitter experience ideally through apprenticeship with exposure to and of the following: non return valves, flow control valves, solenoid valves, cold gas thrusters or any fluidic components for the space industry.
Training and skills development will be provided, extended working hours may be required to meet production targets.
Responsibilities
Precision assembly and test activities in a Class 8 clean room.
Testing the integrity of assembled systems using high pressure gases and leak detection equipment such as helium mass spectrometers.
Cleaning components in preparation for assembly and test activities using automatic particle counting equipment and patch sample counting techniques.
Electrical testing
Gas flow testing of valves, thrusters and fluidic components to ensure components are within
tolerance prior to assembly.
Digital voltmeters, oscilloscopes, data acquisition systems, high voltage dielectric and insulation
resistance test equipment.
Material joining processes including manual TIG (Tungsten Inert Gas) welding, orbital welding, and compiling weld inspection reports on parts and test pieces.....Read more...
Join our leading International Aerospace and Defence company. We are seeking a highly skilled Senior Systems Engineer to play a critical role in supporting our current engine development program. This is an exciting opportunity to contribute to the development of a complex, multifaceted rocket engine system composed of numerous components.
Key Responsibilities
Manage the Design, Verification, and Compliance Matrix at a top level.
Oversee the overall engine system architecture, including
System level analysis FMECAs, radiation, reliability, mechanical, thermal, fluidic, electromagnetic, etc.
Documentation Design, Design Justification Document, Software Requirements Specification, Engine Test Plan, etc.
Collaborate with the Project Manager to plan and organise project tasks and resources.
Support the engine system build, assembly, and test development process by reviewing route cards, build sequences, and integration processes.
Key Requirements
Master???s degree in engineering Aerospace, Mechanical, or Electrical engineering preferred.
Minimum of 5 years of experience in complex product development within the industry.
Proven track record as a technical leader with clear communication skills, leading large multidisciplinary and multicultural engineering teams.
Understanding of Electrical or Harnessing Design, routing, and schematic.
Proficiency in System Thermal Equipment design and selection.
Knowledge of System Analysis, including but not limited to: Fluidic Analysis, Performance Analysis, Thermal Analysis, Radiation Assessment, Failure Modes Effects and Criticality Analysis or FMECA.....Read more...
Cleanroom Production Technician required to join a precision aerospace production team to work in a cleanroom environment on the assembly, integration and testing of aerospace devices.
Our international Aerospace and Defence client is going through a continued period of expansion and looking for Precision Mechanical Assembly Technicians. The ideal candidate will have experience as a Mechanical fitter experience ideally through apprenticeship with exposure to and of the following: non return valves, flow control valves, solenoid valves, cold gas thrusters or any fluidic components for the space industry.
Training and skills development will be provided, extended working hours may be required to meet production targets.
Responsibilities
Precision assembly and test activities in a Class 8 clean room.
Testing the integrity of assembled systems using high pressure gases and leak detection equipment such as helium mass spectrometers.
Cleaning components in preparation for assembly and test activities using automatic particle counting equipment and patch sample counting techniques.
Electrical testing
Gas flow testing of valves, thrusters and fluidic components to ensure components are within
tolerance prior to assembly.
Digital voltmeters, oscilloscopes, data acquisition systems, high voltage dielectric and insulation
resistance test equipment.
Material joining processes including manual TIG (Tungsten Inert Gas) welding, orbital welding, and compiling weld inspection reports on parts and test pieces.....Read more...
Cleanroom Production Technician required to join a precision aerospace production team to work in a cleanroom environment on the assembly, integration and testing of aerospace devices.
Our international Aerospace and Defence client is going through a continued period of expansion and looking for Precision Mechanical Assembly Technicians. The ideal candidate will have experience as a Mechanical fitter experience ideally through apprenticeship with exposure to and of the following: non return valves, flow control valves, solenoid valves, cold gas thrusters or any fluidic components for the space industry.
Training and skills development will be provided, extended working hours may be required to meet production targets.
Responsibilities
Precision assembly and test activities in a Class 8 clean room.
Testing the integrity of assembled systems using high pressure gases and leak detection equipment such as helium mass spectrometers.
Cleaning components in preparation for assembly and test activities using automatic particle counting equipment and patch sample counting techniques.
Electrical testing
Gas flow testing of valves, thrusters and fluidic components to ensure components are within
tolerance prior to assembly.
Digital voltmeters, oscilloscopes, data acquisition systems, high voltage dielectric and insulation
resistance test equipment.
Material joining processes including manual TIG (Tungsten Inert Gas) welding, orbital welding, and compiling weld inspection reports on parts and test pieces.....Read more...
Join our leading International Aerospace and Defence company. We are seeking a highly skilled Senior Systems Engineer to play a critical role in supporting our current engine development program. This is an exciting opportunity to contribute to the development of a complex, multifaceted rocket engine system composed of numerous components.
Key Responsibilities
Manage the Design, Verification, and Compliance Matrix at a top level.
Oversee the overall engine system architecture, including
System level analysis FMECAs, radiation, reliability, mechanical, thermal, fluidic, electromagnetic, etc.
Documentation Design, Design Justification Document, Software Requirements Specification, Engine Test Plan, etc.
Collaborate with the Project Manager to plan and organise project tasks and resources.
Support the engine system build, assembly, and test development process by reviewing route cards, build sequences, and integration processes.
Key Requirements
Master???s degree in engineering Aerospace, Mechanical, or Electrical engineering preferred.
Minimum of 5 years of experience in complex product development within the industry.
Proven track record as a technical leader with clear communication skills, leading large multidisciplinary and multicultural engineering teams.
Understanding of Electrical or Harnessing Design, routing, and schematic.
Proficiency in System Thermal Equipment design and selection.
Knowledge of System Analysis, including but not limited to: Fluidic Analysis, Performance Analysis, Thermal Analysis, Radiation Assessment, Failure Modes Effects and Criticality Analysis or FMECA.....Read more...
Our client, a well-established technology business specialising in electronic and embedded systems, are looking for a Systems Engineer to join their team on a permanent basis.
This is a multidisciplinary engineering role focused on the development of application-specific embedded products, working across firmware, electronics and mechanical hardware to ensure systems meet customer requirements and deliver reliable, efficient and secure solutions.
Key responsibilities of the Systems Engineer job based in Lymington:
Support the definition of overall embedded system architecture, considering performance, scalability and power efficiency.
Interpret user and customer needs and translate them into clear technical system requirements.
Define and negotiate requirements for firmware, electronic and mechanical hardware development.
Work closely with Product Management, Sales and other stakeholders to establish and communicate technical requirements.
Collaborate with software, electronics and mechanical engineering teams throughout the development lifecycle.
Support the integration of hardware and software components to ensure complete system functionality.
Develop and execute system-level test and validation plans.
Troubleshoot and debug embedded systems to identify and resolve technical issues.
Ensure systems meet defined performance, reliability and security requirements.
Produce and maintain comprehensive technical documentation covering system design, functionality and requirements.
Experience required for the Systems Engineer job based in Lymington:
Bachelor’s degree in Computer Engineering, Electrical Engineering, Computer Science or a related engineering discipline.
Experience working with embedded systems and application-specific electronic products.
Proficiency in C and C++ programming languages.
Knowledge of modern operating system concepts, IP protocols and hardware interfaces.
Understanding of electronics and PCB design, with experience using relevant design or EDA tools.
Experience with embedded systems debugging tools and techniques.
Strong understanding of system-level development, integration, testing and validation.
Excellent problem-solving and critical-thinking skills.
Strong communication skills with the ability to work effectively across multidisciplinary engineering teams.
Ability to translate customer and user requirements into practical technical solutions.
If this Systems Engineer job based in Lymington could be of interest, please send your CV to bwiles@redlingroup.Com or call Ben on 01582 878816....Read more...
HGV TECHNICIAN
Location: Gillingham
Salary: £40,000 – £45,000pa
Hours: Monday to Friday - Days
KHR Recruitment Specialists are working with a well-established transport and logistics business based in Gillingham, who are looking for an experienced HGV Technician to join their in-house workshop team.
You’ll be responsible for the servicing, repair and maintenance of a fleet of DAF and Mercedes HGVs, ensuring vehicles are safe, compliant and kept to a high standard.
Key responsibilities:
- Carrying out routine servicing and preventative maintenance
- Completing PMI (Preventative Maintenance Inspection) work
- Diagnosing and repairing mechanical faults
- Carrying out mechanical repairs and component replacements
- Electrical fault finding, repairs and diagnostics
- Working on braking, suspension, steering and transmission systems
- Carrying out inspections and identifying potential faults
- Maintaining and repairing vehicle engines and associated components
- Using diagnostic equipment to identify and rectify faults
- Preparing vehicles for MOT and ensuring roadworthiness
- Maintaining accurate maintenance and repair records
- Ensuring all work is completed safely and in line with company procedures
Candidate Profile
- NVQ Level 3 in HGV Maintenance & Servicing/Repair or equivalent
- Previous experience as an HGV Technician or Mechanic
- Strong mechanical and electrical fault-finding skills
- Experience servicing and maintaining HGVs
- Experience carrying out PMI work
- Experience working on DAF and/or Mercedes vehicles would be advantageous
- A proactive approach and strong attention to detail
- The ability to work independently and as part of a team
- A Class 1 or Class 2 HGV licence would be beneficial but is not essential
At KHR, we take care to ensure that you are represented as well as possible, so it is worth checking your CV for layout, spelling and grammar as well as making sure it is up to date before you submit. If you feel you need to highlight particular qualifications, skills or relevant experience with regard to a specific role, then please add a cover letter or a preface page. This does not need to be formatted in the same manner. In addition, if your CV is heavy with graphics, etc, please could you also submit a "clean" copy in Word. Thank you.
Knowledge House Resourcing Ltd is acting as an Employment Agency in relation to this vacancy. KHR - Recruitment Specialists is a trading name of Knowledge House Resourcing Ltd. Keep in touch with us online for job alerts, industry updates and market...
....Read more...
Principal Mechanical Design Engineer – Medical Devices – Cambridge
A growing Medical Devices team, based in Cambridge, is currently seeking an experienced Mechanical Design Engineer to lead the development of cutting-edge Medical Devices in the fields of Health Technology, Biotech, and Wearable Tech.
The ideal candidate will have a proven track record of developing devices to ISO 13485 standards that have successfully reached the market, spanning various sectors within Medical Devices.
In addition to past experience in inventing and designing Medical Devices, candidates are expected to hold a degree in a relevant field that led them into Mechanical Design or the Medical Devices industry.
You will collaborate with a multidisciplinary team of experts, including Industrial Designers, Electronics Engineers, Physicists, Software Engineers, and Scientists. Some projects may require you to take the lead, which is why this is a principal-level design engineer role.
This company places a strong emphasis on providing continuous training and development to help you advance your career. In addition to career development and the opportunity to work on cutting-edge technologies, you will receive an excellent salary, annual bonuses, healthcare coverage, gym membership, an enhanced pension, and other outstanding benefits.
The company's expansion is driven by successful growth plans, including the construction of brand-new labs.
If you are seeking an exciting and challenging career, we recommend submitting an application now to start the recruitment process.
The organisation frequently creates roles for individuals with the right skills. Therefore, even if you believe the role may be slightly too senior or junior for you, we encourage you to apply so that we can explore potential opportunities together.
For further information, please do not hesitate to contact Andrew Welsh, Director of Medical Devices Recruitment and Scientific Recruitment Specialist at Newton Colmore, at 0121 268 2240. Alternatively, you can submit an application, and a member of our team at Newton Colmore will be in touch.
Newton Colmore Consulting is a specialist recruitment company focused on the Medical Devices, Science, and Machine Learning fields.....Read more...
Senior MEP Project Manager
Somerton
£85,000 - £120,000 + Travel Allowance + Stay Away Expensed + Discretionary Bonus + Pension + Holidays + Private Medical Insurance + Package + Technical Progression + 'Immediate Start'
Take on the role of a Senior MEP Project Manager with a rapidly growing contractor in the thriving data centre and mission-critical construction sector. This role offers a clear path to progression into senior management. In this role, you will be reporting directly to the project director and form part of the leadership team which includes both operational and client engagement.
You will oversee the full lifecycle of MEP works, from design coordination and technical tender assessments to subcontractor management and project execution. Your responsibilities will span procurement, programme and budget control, quality assurance, and client engagement. You will lead technical teams, manage daily activities across contractors and vendors, and ensure full compliance with project delivery standards across mission critical projects.
Your Role as a Senior MEP Project Manager Will Include:
Establish risk and opportunity management procedures and exercises including an early warning system which identifies potential risks or changes
Responsible for handover of Project(s) to operations team, including the resolution of all defects
Developing special solutions / value engineering for MEP Works
Liaise with clients where applicable and manage both their needs and expectations
Responsible for creating and managing project budgets
As a Senior MEP Project Manager, You Will Have:
Strong MEP construction background - either mechanical or electrical bias
Demonstrated success delivering complex commercial, industrial, logistics, pharmaceutical or mission critical projects
Background in leading high-value construction projects within structured, fast-paced environments.
Familiarity with full project lifecycle, from design coordination to commissioning and handoverKeywords:Senior MEP Project Manager, MEP Project Manager, Mechanical Project Manager, Electrical Project Manager, M&E Project Manager, Senior Building Services Manager, MEP Lead, MEP Construction Manager, Senior Mechanical Manager, Senior Electrical Manager, Building Services Project Manager, MEP Contracts Manager, Senior MEP Lead, Technical Services Manager,Somerset, Somerton, Bristol, Bath, Exeter, Taunton, Yeovil, South West, London, Slough, Reading, Oxford, Birmingham, Manchester, Leeds, UK Wide
....Read more...
An excellent opportunity has arisen for a Quality Engineer, based in Bedford, Bedfordshire, to work for a leading Manufacturer of electro-mechanical systems to a range of mission critical environments such as the defence & aerospace sectors.
The Quality Engineer, Bedford, Bedfordshire, will be responsible for ensuring that products and processes are compliant with quality standards such as AS9100. They will specialise in the creation of FAIR reports along with the traceability of production documentation.
The ideal candidate for the Quality Engineer, Bedford, Bedfordshire will have;
Experience with AS9102-C FAIR report creation
Previous experience working in a relatable manufacturing environment in the defence & aerospace industry, ideally within an electro-mechanical environment
Experience with creating PPAP’s and APQP reports
The Quality Engineer, Bedford, Bedfordshire, will have;
Proven experience in quality engineering, quality assurance /
Strong understanding of quality management systems.
Experience with Quality audits.
APPLY NOW for the Quality Engineer, Bedford, Bedfordshire, by sending your CV to TDrew@redlinegroup.Com quoting ref. THD1410. Otherwise, we always welcome the opportunity to discuss other roles similar to Quality jobs on 01582 878 848.....Read more...
Engineering Technician
Great Yarmouth | Double Days | Private Healthcare | Annual Bonus
Looking for a role where you're more than just another number?
We're recruiting for an Engineering Technician to join a well-established manufacturer offering excellent benefits, long-term stability and genuine career development.
Working within a modern production environment, you'll be responsible for keeping equipment running efficiently, supporting changeovers, fault finding and helping maintain high production standards.
What we're looking for
Experience within manufacturing, FMCG, food, pharmaceutical or packaging
Mechanical and/or electrical engineering experience
Engineering qualification (NVQ, City & Guilds or similar)
A proactive attitude and strong problem-solving skills
What's in it for you?
Annual bonus scheme
Private healthcare
Company pension
Life assurance
25 days holiday plus bank holidays
Free daily lunch and refreshments
Free onsite parking
Ongoing training and development
No night shifts
If you're an Engineering Technician, Maintenance Technician, Shift Engineer, Production Technician, Mechanical Engineer or Multi-Skilled Engineer looking for your next challenge, we'd love to hear from you.
Apply today for immediate consideration.....Read more...
A rocket engine, space thruster and chemical propulsion design and development client is looking for someone to join their Systems Engineering team. This is a critical role supporting space satellite propellant and other systems for key spacecraft manufacturers. You will work closely with the National and European Space Agencies for defence and scientific projects.
Due to continued Engineering team growth, there is an opportunity to join their Systems Engineering team, with training, support and commitment to professional development.
Skills
Mechanical and fluidic system engineering experience.
Ability to communicate effectively to a range of stakeholders, playing a key role in project teams and working closely with customers where needed.
Degree level in Mechanical Engineering, Chemical Engineering or a related subject.
Decision Making, take action consistent with facts, constraints, and consequences.
Duties
Perform pressurised propulsion system trade off analysis based on initial, top level inputs.
This is a role which requires flexibility and an ability to meet ambitious and often fluctuating deadlines.
Review and interpret higher level spacecraft requirements generating System Level requirements.
Perform System design including key Electrical, Harnessing Design, routing and schematic components.
Thermal equipment design and selection using System Analysis of Fluidic, Performance, Structural, Thermal, Reliability, Radiation, Hazard, Safety, Failure Modes Effects and Critical FMECA Analysis.
Advise on Manufacturing and Assembly Plan, process and procedures.....Read more...
Assist qualified technicians with vehicle servicing, maintenance and repairs
Carry out basic vehicle inspections under supervision
Learn how to diagnose mechanical and electrical faults
Assist with brake, suspension, steering and other mechanical repairs
Carry out basic component removal and replacement under instruction
Training:Attend Langley College once a week.Training Outcome:Full time employment.Employer Description:At AGS, we are proud to be the UK’s leading provider in bespoke automotive solutions. Whether you need support with electrical vehicles, van hire, truck MOTs or even blockbuster film sets, we deliver an exceptional service with the latest technology. As well as being a Mercedes-Benz franchisee, we have expert knowledge across all vehicles, from commercial recovery, both airside and landside, to breakdown assistance and contract hire vehicles. Browse our full range of services to find out how we can help you and your business.Working Hours :Monday - Friday 8.00am - 6.00pm.Skills: Communication skills,Attention to detail,Organisation skills,Problem solving skills,Number skills,Analytical skills,Logical,Team working,Initiative,Physical fitness,Interest in engineering....Read more...
X3 Mechanical Engineer - Commercial Building - Farringdon, London - Immediate start - On-going - £30 Per Hour An exciting immediate opportunity to join an established building services company based in Farringdon, London. CBW Staffing Solutions are currently recruiting a Mechanical Engineer to cover a commercial site. He or she will be required to carry out planned and reactive building maintenance alongside the maintenance team.Hours of workMonday to Friday07:00am to 15:00pm£30 per hour via UmbrellaContract type: On-going Key duties & ResponsibilitiesPlanned and reactive maintenance HVAC Systems Emergency lighting testsControl PanelsChanging BallastBMS System - Monitor (i.e. Hot & cold)Maintain and update Log booksPlumbing - Unblocking toiletsPumps, motors RequirementsMechanically qualified City & Guilds - Level 2 Must be able to provide copies of your trade certificatesA proven track record in commercial building maintenanceMulti-skilledGood communication skillsClient Facing Please send your CV to Jordyn at CBW Staffing Solutions for more information.....Read more...
A rocket engine, space thruster and chemical propulsion design and development client is looking for someone to join their Systems Engineering team. This is a critical role supporting space satellite propellant and other systems for key spacecraft manufacturers. You will work closely with the National and European Space Agencies for defence and scientific projects.
Due to continued Engineering team growth, there is an opportunity to join their Systems Engineering team, with training, support and commitment to professional development.
Skills
Mechanical and fluidic system engineering experience.
Ability to communicate effectively to a range of stakeholders, playing a key role in project teams and working closely with customers where needed.
Degree level in Mechanical Engineering, Chemical Engineering or a related subject.
Decision Making, take action consistent with facts, constraints, and consequences.
Duties
Perform pressurised propulsion system trade off analysis based on initial, top level inputs.
This is a role which requires flexibility and an ability to meet ambitious and often fluctuating deadlines.
Review and interpret higher level spacecraft requirements generating System Level requirements.
Perform System design including key Electrical, Harnessing Design, routing and schematic components.
Thermal equipment design and selection using System Analysis of Fluidic, Performance, Structural, Thermal, Reliability, Radiation, Hazard, Safety, Failure Modes Effects and Critical FMECA Analysis.
Advise on Manufacturing and Assembly Plan, process and procedures.....Read more...
Technical Sales EngineerBirmingham - UK Wide£40,000 - £50,000 + Commission + Monday-Friday + Career Progression + Specialist Engineering Business + Company Car + Fuel Card + Pension + Holiday + Company Phone + Company Laptop + Ongoing Training + Technical Development + Long-Term Job Security + Job SatisfactionAre you an experienced Technical Sales Engineer with a strong engineering background and a proven track record in technical sales and business development?This is an excellent opportunity to earn a strong income through generating new business and driving sales, whilst enjoying the long-term job security, career progression and job satisfaction that comes with joining a growing specialist engineering business.
This business supplying centrifuges, disc stack separators, filter presses and belt presses, providing specialist solids separation and treatment solutions across a wide range of industrial sectors. Join now as a technicial sales engineer and give yourself the opportubnity to have financial stability and longevity!
The Role Of The Technical Sales Engineer Will Include:
Identify and develop new business opportunities
Build and maintain strong relationships with existing customers
Review sales and cost performance
Consistently work towards and achieve sales targets
The Successful Technical Sales Engineer Will Have:
Previous experience in Technical Sales or a similar role
Strong engineering and technical knowledge
Experience with rotating machinery, dewatering equipment, separation equipment or industrial machinery - advantageous
HNC, HND or Degree in Mechanical Engineering, Process Engineering, Chemical Engineering or a related discipline is preferred
Full UK driving licence
If you have a strong engineering background combined with technical sales and business development experience and are looking to progress your career within a specialist engineering business, this could be an excellent opportunity.
Keywords:Technical Sales Engineer, Sales Engineer, Technical Sales, Engineering Sales, Technical Sales Executive, Sales Engineering, Business Development Engineer, Business Development Manager, Engineering Sales Manager, Mechanical Engineer, Process Engineer, Chemical Engineer, Mechanical Sales Engineer, Industrial Sales Engineer, Industrial Equipment Sales, Machinery Sales, Capital Equipment Sales, Rotating Machinery, Rotating Equipment, Centrifuges, Disc Stack Separators, Filter Presses, Belt Presses, Dewatering Equipment, Solid Separation, Solids Separation, Separation Equipment, Water Treatment, Wastewater Treatment, Process Engineering, Industrial Machinery, Industrial Equipment, Pumps, Filtration, Separation Technology, B2B Sales, Consultative Sales, Account Management, New Business Development, Technical Support, Pre-Sales, Post-Sales, Tenders, Quotations, Proposals, Contract Negotiation, Customer Visits, Engineering Solutions, Birmingham, West Midlands.....Read more...
Field Service Engineer Crawley £36,000 - £38,000 Basic + Door-to-Door Pay + Overtime (£45,000 OTE) + Company Van + Long-Term Progression + Great Culture Are you a hands-on Field Service Engineer looking for a role with long-term security and the opportunity to work for a market leader in the environmental services sector? Join a well-established company backed by significant investment and known for its commitment to staff development and safety. Enjoy the stability of a growing business with huge expansion plans, excellent training, and support from a close-knit and highly skilled team.If you have a background in mechanical or electrical engineering, particularly with pumps, waste water, or separators, this is the ideal opportunity to take your skills to the next level in a vital and varied role as a Field Service Engineer!Your Role As A Field Service Engineer Will Include:* Field-based service, maintenance and audits of industrial assets (separators, tanks, pumps, etc.) * Hands-on site work including inspecting manholes, control panels, filters, and probes * Electrical continuity testing, stripping out/installing control panels * Working within confined spaces and producing integrity reports * Complying with safety, regulatory and customer-specific requirements * Promoting safe practices and high standards across all customer sitesAs A Field Service Engineer You Will Have:* Mechanical or electrical engineering background (wastewater, utilities, ex-military welcome) * Hands-on problem-solving approach with a strong work ethic * Previous experience with pumping stations, separators, or water systems preferred * Full driving license and willingness to travel regionally * IT skills and the ability to use tablets/software on-siteApply now or call Billy on 07458163030 for immediate consideration! Keywords: Field Service Engineer, Mechanical Engineer, Electrical Engineer, Environmental Services Engineer, Pump Engineer, Wastewater Engineer, Utilities Maintenance, Industrial Service Technician, Site Engineer, PPM Engineer, This vacancy is being advertised by Future Engineering Recruitment Ltd. The services of Future Engineering Recruitment Ltd are that of an Employment Agency.Please visit our website to view other positions we are currently handling.Future Engineering Recruitment Ltd can only accept applications from candidates who have a valid legal permit or right to work in the United Kingdom. Potential candidates who do not have this right or permit, or are pending an application to obtain this right or permit should not apply as your details will not be processed.....Read more...
The role is predominantly based in our Engineering lab, so will include working with Development Technicians on the following tasks:
Build and test prototype circuits to concept designs produced by the design engineers.
Assembly and soldering of Printed Circuit Boards.
Assisting with the wiring of inverters and electronic assemblies.
design support and test circuits.
To specify and source components.
To assist with the development of production solutions.
Assist with internal and external development activities.
Build prototype mechanical assemblies to concept designs produced by the design engineers.
Skills that are required or will be taught:
Crimping
Wiring
Soldering
Unit assembly
Use of hand tools
Metalworking
Training Outcome:Upon completion of the apprenticeship, you may be offered a permanent contract.Employer Description:Turbo Power Systems Ltd is a specialist engineering and manufacturing company headquartered on Team Valley Trading Estate in Gateshead. The business designs and manufactures advanced power electronics, power conversion systems and high-speed electrical machines, supplying customers around the world.
Its work spans several important sectors, including rail, energy, industrial technology and electric vehicle infrastructure. In rail, TPS develops equipment such as auxiliary power supplies, traction converters and battery chargers, with thousands of its systems operating on trains and metro networks worldwide.
The company also develops technology for EV charging, smart grids, energy recovery and microgrids, alongside high-speed permanent magnet motors and generators used in applications such as HVAC, air and gas separation and wastewater treatment.
A key feature of the Gateshead operation is that TPS carries out much of its design, development, testing and manufacturing in-house, supported by specialist electrical, mechanical and software engineering capabilities. The company describes its Gateshead facility as a 55,000 sq ft manufacturing and engineering site and has delivered more than 25,000 power conversion systems globally.
With a strong focus on electrification, energy efficiency and clean technology, TPS is an advanced engineering employer with significant opportunities for electrical, electronic, mechanical, manufacturing and engineering apprentices.Working Hours :7:30am to 4:30pm, Monday to Thursday. Friday, 7:30am to 1:30pm.Skills: Communication skills,IT skills,Attention to detail,Organisation skills,Problem solving skills,Presentation skills,Administrative skills,Number skills,Analytical skills,Logical,Team working,Initiative....Read more...
Electrical Shift Engineer - Parking On-Site - FM Service Provider - Law Firm - Canary Wharf - Up to £56,080 Are you a Shift Engineer looking for a new challenge? Are you sick of getting a train into central London? If the answer is yes, then read on... A Fantastic opportunity to work for a leading FM Service Provider situated in Canary Wharf. CBW is currently looking for 4 Electrical Shift Engineers in a critical law firm located in Canary Wharf. The successful candidate will be electrically biased (NVQ, C&G, 18th Edition etc) with a proven track record in commercial building maintenance. Working with the maintenance team on-site, He or she will be required to carry out electrical, mechanical, and fabric maintenance to the following. In return, the company is offering a competitive salary of £56,080 (Inclusive of Allowances) with great opportunities for further training and career progression, including LV & HV AP training. PackageUp to £50,300 + 10% Shift Allowance (£55,330)HVAP Allowance - £750 (Total including HV - £56,080)23.5 days shift holiday Near-unlimited OT due to ongoing projectsCompany pension Season Ticket LoanParking On-siteGreat opportunity to get put through HV TrainingDuties & Responsibilities:Lighting (Small installation, Fault-finding, Lamping, Changing ballast, Control panel, Power distribution)Emergency lightingAir Conditioning - Air Handling Units / Fan Coil Unit (Filter changes, cleaning)Chillers - Re-setWater Treatment (Temperature checks / Not dosing)Plumbing - Unblocking toiletsPumps, motorsWater TreatmentBMS System - Monitor (i.e. Hot & Colds)UPS Systems - Monitor / Take readingsHours of work Continental Shift Pattern - Days & Nights – 07:00 am to 19:00 pm & 19:00 pm to 07:00 am RequirementsElectrical or Mechanical qualifications (C&G, NVQ etc)A proven track record in Building MaintenanceGood Communication Skills.Multi-Skilled - Mechanical / Electrical.Knowledge of UPS / Generators / Power Distribution / HVAC / HV LVGood Leadership & Management skillsHigh desirablePrevious experience in a Critical environmentPrevious experience in a corporate environmentHigh Voltage certified (Current or Expired)If you are interested please email your CV to Archie Reed of CBW Staffing Solutions to avoid missing out! ....Read more...
Mechanical Fitters / Assemblers Bradford | £16.30 – £17.08 per hour | 4 Day Week | Overtime Available
We are currently recruiting Mechanical Fitters and Assemblers to join a well-established fabrication business in Bradford. This is a great opportunity offering strong hourly rates, a 4-day working week, and immediate starts.
The Role:
Mechanical fitting and assembly of pipework systems
Installing pipework, flanges, and associated components
Pipe threading and preparation
Working from engineering drawings
Using hand tools (spanners, drills, taps, torque wrenches)
What’s on Offer:
£16.83 – £17.08 per hour
Minimum 12 weeks’ work – likely ongoing
4-day working week (Monday to Thursday)
Flexible start/finish times
Overtime paid at 1.5x
28 days holiday
Free parking
Potential for long-term or permanent work
About You:
Experience as a Mechanical Fitter, Pipe Fitter, or Assembler
Background in fabrication, engineering, or manufacturing
Pipe threading experience desirable
No formal qualifications required
Apply: Click Apply Now or contact Conor Wood at E3 Recruitment for more information.....Read more...
Shift HVAC / Mechanical Engineer London | ️ Landmark Venue 4 on / 4 off – 12-hour shiftsI’m working with a world-class landmark London venue to recruit a Shift HVAC / Mechanical Engineer to join their on-site engineering team.This is a unique opportunity to work in a £1bn state-of-the-art facility, supporting live events, high-profile operations, and day-to-day critical building services in a fast-paced, high-performance environment. The Role
You’ll be responsible for the safe, reliable and efficient operation of HVAC and mechanical systems across the venue and wider campus.This includes planned preventative maintenance, reactive repairs, pre-event checks, and rapid fault finding during live operations.Key systems include:
AHUs, FCUs, VRF/VRV systemsChillers, boilers, pumps & pressurisation unitsVentilation and associated building servicesBMS monitoring and fault response
Working as part of a shift team, you’ll ensure maximum plant availability, compliance, and a safe operational environment at all times. What We’re Looking For
Strong HVAC / Mechanical / Building Services backgroundExperience in large commercial, public or critical environmentsConfident fault-finding and diagnostic skillsExperience working shift patternsKnowledge of BMS systems (CAFM experience desirable)
Desirable Experience
Stadiums, arenas, airports, or similar large venuesLive event / matchday operational supportF-Gas, 18th Edition, IPAF / PASMA or equivalent qualifications
Why This Role?
This is an opportunity to be part of a highly skilled engineering team operating in one of London’s most prestigious and technically advanced venues.You’ll play a key role in ensuring seamless operations behind major live events, where reliability, speed, and precision really matter.....Read more...
FP McCann are the UK’s largest manufacturer and supplier of precast concrete solutions. They are committed to high quality, cost-effective and sustainable solutions tailored to meet their clients' requirements.
From their thirteen UK manufacturing facilities, FP McCann offers solutions that include architectural and structural solutions, rooms, flooring, fencing, walling, shafts, tunnels, drainage, rail, power and agricultural products. They have worked on a large range of Design for Manufacture and Assembly (DfMA) projects across the UK. Their in-house Digital Engineering capability has grown in line with government and client expectations.
As a Mechatronics Maintenance Apprentice, you will develop the practical skills and technical knowledge needed to become a multi-skilled maintenance engineer. Working alongside experienced engineers, you will gain hands-on experience maintaining, repairing and improving the plant and equipment that keeps their manufacturing operations running safely, efficiently and reliably. Over the course of this four-year apprenticeship, you will combine structured off-the-job training with practical, on-site learning, building expertise in both mechanical and electrical engineering disciplines.
You will be part of the Maintenance Team, working under the guidance and support of a dedicated mentor who will help you develop your skills and confidence throughout the programme. As your experience grows, you will take on increasing responsibility while learning to work safely and professionally in a busy manufacturing environment.
Your day-to-day activities will include supporting planned preventative maintenance to maximise equipment reliability and minimise downtime, assisting with fault finding, diagnosing and repairing mechanical and electrical systems on a wide range of manufacturing plant, and helping to maintain pneumatic and hydraulic equipment, motors, drives, sensors and basic control systems. You will also carry out routine inspections, lubrication, adjustments and component replacements under supervision while learning industry best practice.
Safety will be at the heart of everything you do. You will follow safe systems of work, including risk assessments, permit-to-work procedures and lock out/tag out (LOTOTO) processes, while maintaining high housekeeping standards across the site. You will also learn the importance of accurately recording maintenance activities, communicating effectively with the engineering team and contributing to continuous improvement initiatives that enhance safety, quality, reliability and operational performance.Training:
Level 3 Mechatronics Maintenance Technician
Level 2 Functional Skills in English and maths if required
Training Outcome:Successful completion of the apprenticeship will open the door to excellent career opportunities within FP McCann. They are committed to investing in their people and supporting continued learning, personal development and long-term career progression.
Throughout the programme, you will gain a nationally recognised qualification while receiving structured on-the-job training and valuable hands-on experience in a modern manufacturing environment. You will be supported every step of the way by experienced engineers and dedicated mentors, helping you build the knowledge, skills and confidence needed for a successful engineering career.
You will gain:
Real experience working in the industry
Ongoing support and mentoring from experienced team members
The opportunity to build skills in Electrical machines, Electro-pneumatic and electro-hydraulic systems and devices, Mechanical principles and applications, Engineering maintenance procedures and techniques, Monitoring and fault diagnosis of electrical and mechanical engineering systems
Employer Description:FP McCann LtdWorking Hours :Monday to Friday - You will work 8 hour shifts (30-minute unpaid lunch break) scheduled between 6:00am and 6:00pm, with shift patterns varying to meet business needs.Skills: Attention to detail,Motivated and eager to learn,Team working....Read more...
Plumber - Glasgow - Salary up to £38,000 DOE CBW have a new opportunity for a Plumber to join a leading facilities provider. This role is a permanent full-time role working across Glasgow and the Central Belt of Scotland. Key Responsibilities:Ensure all PPM is carried out in accordance with the maintenance specification.Maintenance and repair of Mechanical Installation.Maintenance and repair of Plumbing InstallationsEnsure that all relevant paperwork is completed regarding PPM, reactive and breakdown works and that it is passed without delay to the contract administrator.Update customers CAFM system in real time.Ensure that plant faults and defects are swiftly remedied to maintain plant in serviceable order.Person Specification:A recognised industry qualification will be required, and previous experience is essential.H&S qualification (IOSH preferable)Trade qualified Mechanical/Plumber with appropriate post apprenticeship experience desirable.Must have a full clean drivers’ licence.Legionella awareness (preferable – can provide training)Asbestos awareness (preferable but not essential)MEWP Licence (preferable but not essential)Salary & Benefits:Salary up to £38,000 DOE.24 days annual leave Van & fuel cardCompany Pension....Read more...
