The Test Engineer will join a Systems Engineering team critical in space thruster engine development. You will work on a complex, multifaceted rocket engine system comprised of numerous newly developed and integrated components. This role has wide ranging technical input including structural, thermal, rocket propulsion, space electronics, software, testing and systems analysis.
In essence as a Senior Systems Engineer, you will coordinate and bring together the diverse sub components and sub assembles into a complete working space engine design.
My client supplies chemical propulsion rocket engines and thrusters serve to key spacecraft manufacturers for commercial, defence and scientific applications.
Requirements
Space systems experience ideally of large European space projects, system primes or ESA.
Technical leadership of large, multidisciplinary Electrical Harnessing Design, routing and schematic Mechanical and fluidic system Engineering projects.
System Analysis knowledge to apply to, fluidic systems, surge pressure and pressure drop. Performance, Structural, Thermal, Reliability, Radiation Assessment, Hazard or Safety Analysis.
Complex product development experience of thermal design and equipment selection using Failure Modes Effects and Criticality Analysis (FMECA).
Intelligent, logical approach to problem solving.
Degree, Masters or higher qualification in Engineering, Aerospace, Mechanical or Electrical Engineering.
You will own the overall engine system architecture, analysis and documentation including FMECAs, radiation, reliability, mechanical, thermal, fluidic, electromagnetic, Design, Development and Verification Plan, Design Justification Document, Software Requirements Specification, Engine Test Plan etc. Working closely with the Project Manager to help plan and organise resources.
Responsibilities
Support propulsion engine build, assembly and test development including route card build sequences and system assembly, integration, Manufacturing and Inspection Flow Charts.
Review, interpret, manage and own the spacecraft requirements then disseminate down to relevant engine subsystem or component teams.
Coordinate of top level Design, Verification and Compliance Matrix.
Internally digest key subsystem and component review documentation ensuring work is completed to required standards and all aspects of the engine system are correctly aligned.
Lead customer interactions and engine level reviews also manage supplier technical queries in conjunction with the appropriate resource.....Read more...
This paid apprenticeship offers a dynamic environment to learn essential technical competencies while contributing to the safety, efficiency, and sustainability of building operations. You will gain hands-on experience working with cutting-edge tools and software, preparing you for a successful career in building services engineering and systems management.
Duties:
Use AutoCAD and Revit to create detailed schematics and system layouts for building projects
Support system design processes by applying principles of systems engineering and analyzing schematics to troubleshoot issues effectively
Participate in fabrication and assembly tasks utilising CAD software and fabrication techniques to develop prototypes or repair parts
Support product development initiatives by applying mechanical knowledge, math skills, and technical documentation to improve existing systems or develop new solutions.
Qualifications Needed:
You will be expected to have at least 5 GCSEs at Grade 4 or above, including English, Maths and Science, and Maths at Grade 5 or above (or their equivalent).
This paid apprenticeship is designed for motivated individuals eager to build a solid foundation in building services technology while working alongside experienced professionals. Join us to develop your technical expertise in a vibrant setting that values innovation, safety, and continuous learning!Training Outcome:Once the Level 3 has been completed, the opportunity to proceed to Level 4. Employer Description:Buxton & McNulty Mechanical Services Ltd., became incorporated in April 2005 and was formed to provide Mechanical Services. We specialise in pipework installations covering public health, heating, chilled water, condensate. We offer onsite welding and have a prefabrication shop where pipe can be made to measure and delivered to site.Working Hours :Monday - Friday 9.00am - 5.00pmSkills: Communication skills,IT skills,Attention to detail,Organisation skills,Problem solving skills,Presentation skills,Number skills,Analytical skills,Logical,Team working,Creative,Initiative,Non judgemental,Patience....Read more...
Mechanical Maintenance Engineer – FM Service Provider - Manufacturing Environment – Peterborough – Up to £35,000 + Package An exciting opportunity to join an established FM service provider based in Peterborough has arisen! CBW Staffing Solutions is currently recruiting a multi-skilled Mechanical Engineer based in a manufacturing environment. He or she will be required to carry out planned and reactive maintenance across this static site. The successful candidate will have a strong understanding of Facilities Maintenance and have a proven track record in building maintenance. In return, the company is offering a competitive salary of up to £35,000, overtime, further training and a potential route into further career progression. In return, my client is offering a very competitive package including:A basic salary of up to £35,000Plenty of overtime 25 days holiday + Bank HolidaysCompany Pension SchemeExcellent career progression opportunitiesHours of workMonday- Friday 08:00-17:00Key duties & ResponsibilitiesMonitor mechanical plantPlumbing work (Unblocking toilets, replacing taps, washers etc)Pumps, Motors, Seals, BearingsAir Conditioning - Air Handling Units / Fan Coil Unit (Filter changes, cleaning)Water Treatment (Temperature checks / Not dosing)Basic electrical duties (Lamp changes etc)General building fabricEscort specialist sub contractorsRequirementsMechanically qualified - City & Guilds Level 2Must be able to provide copies of your trade certificatesA proven track record in commercial building maintenanceMulti-skilledGood communication skillsClient Facing Please send your CV to Archie Reed of CBW Staffing Solutions to avoid missing out on the role !....Read more...
Junior Mechanical Maintenance Engineer – FM Service Provider - Manufacturing Environment – Peterborough – Up to £30,000 + Package An exciting opportunity to join an established FM service provider based in Peterborough has arisen! CBW Staffing Solutions is currently recruiting a junior Mechanical Engineer based in a manufacturing environment. He or she will be required to carry out planned and reactive maintenance across this static site. The successful candidate will have a strong understanding of Facilities Maintenance and have a proven track record in building maintenance. In return, the company is offering a competitive salary of up to £30,000, overtime, further training and a potential route into further career progression. In return, my client is offering a very competitive package including:A basic salary of up to £30,000Plenty of overtime 25 days holiday + Bank HolidaysCompany Pension SchemeExcellent career progression opportunitiesHours of workMonday- Friday 08:00-17:00Key duties & ResponsibilitiesMonitor mechanical plantPlumbing work (Unblocking toilets, replacing taps, washers etc)Pumps, Motors, Seals, BearingsAir Conditioning - Air Handling Units / Fan Coil Unit (Filter changes, cleaning)Water Treatment (Temperature checks / Not dosing)Basic electrical duties (Lamp changes etc)General building fabricEscort specialist subcontractorsRequirementsMechanically qualified - City & Guilds Level 2Must be able to provide copies of your trade certificatesA proven track record in commercial building maintenanceMulti-skilledGood communication skillsClient Facing Please send your CV to Archie Reed of CBW Staffing Solutions to avoid missing out on the role !....Read more...
Shift Leader – FM Service Provider – North West London – Up to £58,000 per annumCBW is recruiting an experienced Shift Leader to join a prestigious multi-tenant commercial campus in North West London. This is an excellent opportunity for a technically strong engineer to work within a modern and technically challenging environment, delivering first-class building maintenance across a vibrant mixed-use estate occupied by a diverse range of commercial tenants.Hours of WorkContinental Shift Pattern – Days & Nights (7 on, 7 off rotation)Key DutiesLead, motivate and support the on-site shift engineering team.Ensure all Planned Preventative Maintenance (PPM) and reactive maintenance tasks are completed efficiently using the site’s CAFM system.Carry out hands-on electrical and/or mechanical maintenance when required.Diagnose and rectify faults on plant and equipment, minimising downtime and ensuring business continuity.Monitor the quality of maintenance activities, documentation and housekeeping standards across the site.Manage spare parts and ensure critical stock levels are maintained.Maintain accurate maintenance records, reports and job documentation.Prepare, review and implement Risk Assessments and Method Statements (RAMS) to ensure safe systems of work.Support the delivery of a safe, compliant and high-performing building environment.RequirementsFully qualified in Electrical or Mechanical Engineering (City & Guilds, NVQ Level 3 or equivalent).Previous experience working in a critical environment such as commercial offices, banking, data centres, healthcare or other high-profile facilities.Strong understanding of electrical and mechanical building services.Experience with critical systems, including UPS, generators, switchgear, transformers and power distribution.Previous experience leading an engineering shift team within a critical or large commercial environment.Excellent fault-finding, communication and problem-solving skills.A proactive, customer-focused approach with a commitment to delivering exceptional engineering standards.....Read more...
Field Service EngineerColchester£43,000 - £49,000 + Overtime + Stable + Long-Term
Are you a Field Service Engineer looking for a varied role working on modern construction and industrial machinery? Are you experienced in mechanical, hydraulic, and electrical fault finding and looking to join a hands-on, customer-focused engineering team? This is an excellent opportunity to join a growing machinery business, offering a varied workload, manufacturer exposure, and the opportunity to work on a wide range of SANY construction equipment.
This role is ideal for a Field Service Engineer with experience working on plant, construction, agricultural, heavy machinery, or similar equipment. You’ll work across Essex, Norfolk and the surrounding areas, carrying out servicing, diagnostics, repairs, and preventative maintenance while representing the business professionally at customer sites.
Your Job As A Field Service Engineer Will Include:
Servicing, maintaining, fault finding, and repairing SANY construction and industrial machinery
Working on a varied range of equipment including Telehandlers, Rollers, Excavators from 1t to 75t, Material Handlers and Loading Shovels
Carrying out mechanical, electrical, and hydraulic diagnostics and repairs
Attending customer sites and completing work safely, efficiently, and to a high standard
Reading and interpreting electrical and hydraulic schematics to support accurate fault diagnosis
Identifying and requesting the correct parts required to complete repairs
Completing service reports, PDI documentation, manufacturer paperwork, and records of parts used
Communicating with customers and machine operators regarding machinery operation, repairs, and relevant health & safety requirements
Working closely with Service Controllers, Service Supervisors, Technical Managers, and other Field Engineers
Providing technical feedback on recurring faults, customer issues, and potential improvements
Supporting the wider service team and taking ownership of field-based jobs
As A Field Service Engineer You Will Have:
Experience working on plant, construction, agricultural, heavy machinery, or similar equipment
Strong mechanical, hydraulic, and electrical fault-finding ability
Ability to read and interpret electrical and hydraulic schematics
Experience completing service records, job reports, defect records, and manufacturer paperwork
Experience with SANY machinery would be advantageous, although transferable experience with other manufacturers will be considered
Good IT literacy and confidence using smart devices to complete job reports and record defects
A full current UK driving licence
A professional and customer-focused approach with good communication skills
A flexible and reliable attitude with a willingness to support the wider service team
Keywords: Field Service Engineer, Service Engineer, Plant Engineer, Heavy Plant Engineer, Construction Equipment, Plant Machinery, SANY, Excavators, Telehandlers, Rollers, Material Handlers, Loading Shovels, Mechanical Engineering, Hydraulic Engineering, Electrical Engineering, Fault Finding, Diagnostics, Maintenance, Repairs, Essex, Norfolk, Colchester, Engineering Services....Read more...
Warehouse Operative – Mobility EquipmentStaffordStarting Salary £23,000 per annum. Monday – FridayImmediate start availableAbout the RoleOur client is looking for a reliable and hardworking Warehouse Operative to join theirgrowing mobility equipment company based in Stafford.This is a hands-on and varied role combining order preparation, equipment assembly and product inspection. The position would suit someone practical with a mechanical mindset who enjoys working with equipment rather than purely picking and packing products.You will play an important role in preparing mobility equipment that helps improve their customers’ independence and quality of life.Key Responsibilities
Picking and preparing products for customer orders and deliveriesBuilding and assembling mobility equipmentCarrying out product checks and quality inspections to ensure items meet company standardsAssisting with loading and unloading vehicles alongside the distribution teamSupporting stock takes and inventory control when requiredSafely handling and moving stock within the warehouseIdentifying any faults or mechanical issues with equipment before dispatchMaintaining a clean, organised and safe working environmentFollowing all company health and safety proceduresSupporting general warehouse duties to ensure smooth day-to-day operations
What They’re Looking For
Full UK driving licence (essential)Forklift licence (desirable but not essential)A mechanical mindset or experience working with equipment or machineryMechanical or practical experience such as bike repairs, car maintenance, DIY, equipment assembly or similar skills would be highly valuedGood attention to detail when preparing and inspecting productsAbility to safely carry out manual handling and liftingA positive attitude and strong work ethicPrevious warehouse experience is beneficial but not essential
Why Join Them
Monday to Friday working hours – no weekend workStable, full-time position within a growing companySupportive and friendly team environmentOpportunities for progression within the warehouse and technical teamThe chance to work with specialist mobility equipment that genuinely improves customers’ lives
If this sounds like the opportunity for you, please apply ASAP.*PLEASE NOTE – by applying to this position, you agree for your CV to be submitted to our client, who shall contact you directly, should your application make their short-list. You also agree to our Privacy Policy: acapella-recruitment.co.uk./privacy-policy.html which can be found on our website.....Read more...
Multiskilled Maintenance Engineer
A global chemical manufacturer at the forefront of sustainability, clean energy transition and circular economy innovation is looking to appoint a Multiskilled Maintenance Engineer to join its engineering and operations team in Warrington.
Salary and Benefits
Annual Salary Between £58,000 - £63,000 (DOE)
Competitive Company Pension Scheme
Private Medical Insurance
Healthcare Cashback Plan
25 Holidays + 8 Bank Holidays
Life Assurance Policy
Shift Pattern
37.5 Hour Working Week
Monday – Friday, 8am – 4pm
Call-Out Rota
The Role of Multiskilled Maintenance Engineer
Reporting to the Maintenance Manager, the successful Multiskilled Maintenance Engineer will play a key role in maintaining plant equipment, infrastructure and site reliability through planned, preventative and reactive maintenance activities across both Mechanical and EC&I disciplines.
This is an excellent opportunity for a time-served, Multiskilled Engineer looking to join a forward-thinking manufacturing business focused on operational excellence, continuous improvement and sustainable technologies.
Key Responsibilities of the Multiskilled Maintenance Engineer:
Deliver planned and reactive maintenance across mechanical, electrical, control and instrumentation systems
Fault find and diagnose issues across complex process plant equipment
Support plant reliability, minimise downtime and maximise operational availability
Carry out maintenance activities in line with SAP PM schedules
Support commissioning, plant modifications and improvement projects
Maintain compliance with HSE procedures, permits and isolation standards
Work closely with production teams, engineering colleagues and contractors
Update maintenance records and work orders within SAP CMMS systems
Participate in the site on-call engineering rota
The Ideal Candidate Will Have:
Recognised engineering apprenticeship or equivalent qualifications (e.g. HNC/HND in their engineering discipline)
Multi-skilled engineering experience across Mechanical and EC&I disciplines
Experience within chemical, manufacturing or process industries
Strong knowledge of pumps, motors, drives, instrumentation and control systems
Ability to read and interpret mechanical, electrical and control drawings
Experience using SAP PM or similar maintenance management systems
Excellent fault-finding, problem-solving and organisational skills
Why Apply for the Multiskilled Maintenance Engineer role?
This opportunity offers the chance to join a globally recognised manufacturer investing heavily in sustainable technologies, operational improvement and future-focused innovation, while working within a collaborative and safety-driven engineering environment.
How to Apply?
To apply for the position of Multiskilled Maintenance Engineer, please submit a copy of your CV for review.
....Read more...
Multi-Skilled Engineer – 4 Day Week 32 hours£15–£18 per hour | Monday–Thursday | Friday OFF Taunton area | 7:30am–4:00pmA job where no two days are the same.We're looking for a practical, multi-skilled engineer to join our team in beautiful Somerset surroundings.This is far from a typical maintenance role. You'll support a small successful cider production operation, but because the business this role has many different facets, your work will be incredibly varied.One day you could be repairing production machinery; the next you might be fixing agricultural equipment, welding, fabricating, carrying out carpentry, basic plumbing or helping with building and facilities maintenance.If you're the person who enjoys fixing things, solving problems and getting stuck in, we'd like to hear from you.What you'll be doing
Mechanical maintenance and repairsCider production equipment maintenanceAgricultural/farming equipment repairsWelding, fabrication, metalwork and lathe workCarpentry and woodworkBasic plumbing and building repairsFacilities and general handyman workBasic electrical tasksGeneral fault finding and problem solving
About youWe're looking for someone with good mechanical experience and a practical, can-do attitude.You don't need to be an expert in everything, but experience in several of the following would be ideal:Mechanical maintenance | Welding | Fabrication | Metalwork | Lathe work | Carpentry | Plumbing | Building repairs | Basic electricsThis could suit a Multi-Skilled Engineer, Maintenance Engineer, Mechanical Engineer, Engineering Technician, Agricultural Engineer, Workshop Engineer or experienced Maintenance Technician.Why join us?
£15–£18 per hour, depending on experience32 hours over 4 daysMonday–Thursday – Friday OFF7:30am–4:00pm some flexibility maybe requiredBeautiful working surroundings28 days' holiday pro rata, including Bank HolidaysFree on-site parkingDiscounted staff mealsStaff discounts on retail, hospitality and mealsRoyal London pension scheme after 3 months, subject to eligibility
LocationBased in the Taunton area, the role could suit candidates commuting from Taunton, Wellington, Bridgwater, Ilminster, Chard, Yeovil, Crewkerne, Langport, Street, Glastonbury, Wiveliscombe, Martock and surrounding areas.If you want a hands-on engineering role with genuine variety, beautiful surroundings and a three-day weekend every week, we'd love to hear from you.....Read more...
AA Euro Group are currently seeking an experienced MEP Design Engineer on behalf of a leading electrical contractor based in London. This is a full-time permanent position where you will be required to split your time between the office (East London) and site (Canary Wharf).Job PurposeThe MEP Building Services Design Assistant will support the design and delivery of mechanical and electrical building services projects from initial concept through to construction. The role will work closely with the Design Team, Project Managers, Quantity Surveyors, site teams and external consultants to produce accurate, coordinated and practical MEP design information.The successful candidate will assist with drawings, calculations, specifications, design coordination and document control while developing their technical knowledge across mechanical and electrical building services.Key Responsibilities:Design & Technical Support
Assist with the preparation and development of MEP building services designs.Produce and amend mechanical and electrical services drawings using relevant CAD/BIM software.Assist with layouts for HVAC, ventilation, heating, plumbing, drainage, electrical containment, lighting, power and other building services.Assist with design calculations, equipment selections and technical schedules under appropriate supervision.Review drawings and technical information to identify potential clashes, discrepancies or design issues.Assist with the preparation of design specifications, schedules and technical documentation.Ensure drawings and design information are produced accurately and in accordance with project requirements.
BIM & CAD
Assist with the production and maintenance of 2D and 3D MEP models and drawings.Support BIM coordination and clash detection processes.Update drawings and models following design changes, site information and coordination meetings.Maintain drawing standards, revisions, naming conventions and file structuresWork with the wider Design Team to ensure mechanical and electrical services are properly coordinated.
Project & Design Coordination
Attend design, coordination and project meetings where required.Liaise with Project Managers, QSs, site teams, subcontractors, suppliers and consultants.Assist with responding to technical queries and requests for information.Review information received from clients, consultants and subcontractors.Assist with incorporating site survey information into design documentation.Support the Design Team in resolving technical issues during construction.
Documentation & Quality
Maintain accurate design records and document registers.Ensure drawings and technical documents are issued correctly and within agreed timescales.Follow company design procedures, quality requirements and document control processes.Assist with checking designs and drawings before issue.Maintain confidentiality of company, client and project information.Ensure all work complies with relevant legislation, British Standards, Building Regulations and project specifications.
Site Support
Undertake occasional site visits to assist with surveys, inspections and designcoordination.Record site conditions and provide accurate information to the Design Team.Assist with resolving design issues identified during construction.Liaise with site personnel to understand practical installation requirements andconstraints.
Skills & Competencies
Some experience or education within MEP, building services, mechanical engineering, electrical engineering, construction or a related discipline.Ability to read and understand technical drawings.Good understanding of basic building services principles.Good IT skills, including Microsoft Office.Strong attention to detail and accuracy.Good organisational and time-management skills.Ability to work effectively as part of a multidisciplinary team.Willingness to learn and develop technically.Good written and verbal communication skills.
Working Conditions
Office-basedFull-time, Monday to Thursday 8am -5pm Friday 8am – 4:30pmMay involve working to tight deadlines during project handover or tender periods.The duties outlined above are not exhaustive. The post holder may be required to undertakeadditional reasonable duties consistent with the level and purpose of the role.
INDUK....Read more...
Engineering Handyman / Multi-Skilled Engineer – part time£15–£18 per hour | 32 hours | Monday–Thursday | Friday OFF Taunton area | 7:30am–4:00pmA hands-on role where no two days are the same.We're looking for a practical Engineering Handyman / Multi-Skilled Engineer to join our team in beautiful Somerset surroundings.This is far from a typical maintenance role. You'll support a small successful cider production operation, but because the business has many different facets, your work will be incredibly varied.One day you could be repairing production machinery; the next you might be fixing agricultural equipment, welding, fabricating, carrying out carpentry, basic plumbing or helping with building and facilities maintenance on a large hospitality areaIf you're the person who enjoys fixing things, solving problems and getting stuck in, we'd like to hear from you.What you'll be doing
Mechanical maintenance and repairsCider production equipment maintenanceAgricultural and farming equipment repairsWelding, fabrication, metalwork and lathe workCarpentry and woodworkBasic plumbing and building repairsFacilities and general handyman workBasic electrical tasksGeneral fault finding and problem solving
About youWe're looking for someone with good mechanical experience and a practical, can-do attitude.You don't need to be an expert in everything, but experience in several of the following would be ideal:Mechanical maintenance | Welding | Fabrication | Metalwork | Lathe work | Carpentry | Plumbing | Building repairs | Basic electricsThis could suit a Multi-Skilled Engineer, Maintenance Engineer, Mechanical Engineer, Engineering Technician, Agricultural Engineer, Workshop Engineer, Engineering Handyman or experienced Maintenance Technician.Why join us?
£15–£18 per hour, depending on experience32 hours over 4 daysMonday–Thursday – Friday OFF7:30am–4:00pmBeautiful working surroundings28 days' holiday pro rata, including Bank HolidaysFree on-site parkingDiscounted staff mealsStaff discounts on retail, hospitality and mealsRoyal London pension scheme after 3 months, subject to eligibility
LocationBased in the Taunton area, the role could suit candidates commuting from Taunton, Wellington, Bridgwater, Ilminster, Chard, Yeovil, Crewkerne, Langport, Street, Glastonbury, Wiveliscombe, Martock and surrounding areas.If you want a hands-on Engineering Handyman role with genuine variety, beautiful surroundings and a three-day weekend every week, we'd love to hear from you. ....Read more...
JOB DESCRIPTION
RPM Industrial Coatings Group in Hudson, NC is looking for 2nd Shift Aerosol Line Operators (Shift Differential). $1,000 Sign-On Bonus!
GENERAL SUMMARY
Responsible for filling production batches into aerosol containers as indicated on batch tickets. Performs routine maintenance and makes mechanical or electrical adjustments or repairs to production line machines as needed.
PRINCIPLE DUTIES AND RESPONSIBILITIES include the following. Other duties may be assigned.
Locate proper product and filling items such as cans, lids, labels, etc. to fill aerosol containers per batch ticket instructions.
Set up all equipment on filling line and make changeovers for filling new batch ticket orders.
Review finished order for final counts on product and fill rates.
Maintain neat and orderly work area.
QUALIFICATIONS
To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.
Experience and Education Required
No experience necessary
Fill off experience preferred
Specific Knowledge, Skills, and Abilities Required
Basic math/ measurement skills
Basic reading and comprehension skills
Basic mechanical and machine repair skills
Prior Aerosol Line Attendant knowledge preferred
Reasoning Ability
Ability to determine correct processes regarding standard aerosol filling procedures as instructed in initial training.
Ability to determine and make basic mechanical adjustments and know when additional assistance is needed.
The ability to work without continuous supervision and complete assigned projects.
PHYSICAL DEMANDS
The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals to perform the essential functions.
While performing the essential functions of this job the employee is regularly required to stand and use hands to grasp, handle or feel. The employee is occasionally required to walk, bend, stoop, talk and/or hear. Employee must regularly lift and/or move up to 20 pounds and occasionally lift and/or move up to 100 pounds.
WORK ENVIRONMENT
The work environment is representative of those an employee would encounter in a normal paint manufacturing facility while performing the job tasks listed in this job description. The employee is regularly exposed to moving mechanical parts and occasionally to wet and/or humid conditions. The noise level in the work environment is usually moderate.
KEY PERFORMANCE INDICATORS (KPI)
Number of units produced online each day
Accuracy of units produced
Proper maintenance of equipment
Appearance of work area.Apply for this ad Online!....Read more...
The MET Technician / Strip Fitter role (Reigate)
- Salary of up to £25 p/h + Bonus
- Monday to Friday only - Permanent Role
- Ongoing training and development
We are seeking an experienced and motivated MET Technician to join a busy, professional accident repair centre. This is an excellent opportunity for someone who takes pride in their work and enjoys being part of a high-performing team. You will play a key role in the repair process, carrying out vehicle strip, fit, and mechanical repairs while ensuring every vehicle is returned to pre-accident condition.
Key Responsibilities:
- Carry out the removal and refitting of vehicle components to support high-quality body repairs
- Dismantle and rebuild vehicles efficiently, following repair methods and manufacturer guidelines
- Accurately identify and report any additional damage not included within the original estimate
- Perform mechanical repairs including suspension work, four-wheel alignment, and diagnostic procedures
- Complete GEO and ADAS-related tasks where required
- Work collaboratively with colleagues to ensure repairs are completed on time and to a high standard
- Maintain a strong focus on quality, safety, and customer satisfaction throughout the repair process
Requirements:
- Previous experience working as an MET Technician, Strip Fitter, or Vehicle Technician within an accident repair environment
- ATA or NVQ qualifications would be advantageous but are not essential
- Hybrid and Electric Vehicle training would be beneficial
- ADAS experience or accreditation would be highly desirable
- Excellent attention to detail and a commitment to delivering first-class repairs
- Strong team player with the ability to perform well in a fast-paced workshop environment
Benefits:
- Pension Scheme
- Ongoing training and development opportunities
- Work within a well-equipped, manufacturer-approved repair centre
- Career progression opportunities within a successful national organisation
- Supportive management team and positive working environment
If you are an experienced MET Technician looking to join a forward-thinking business that values its employees and offers genuine long-term career prospects, we'd love to hear from you. Please send us your CV by clicking apply now or by contacting Piam Pishgoo on 01202 552915 / piam@holtautomotive.co.uk to discuss further.
MET Technician / Strip Fitter - up to £25 p/h Bodyshop Reigate
MET Technician / Strip Fitter / Bodyshop Technician / Mechanical Electrical Trim Technician....Read more...
The MET Technician / Strip Fitter role (Binfield)
- Salary of up to £25 p/h + Bonus
- Monday to Friday only - Permanent Role
- Ongoing training and development
We are seeking an experienced and motivated MET Technician to join a busy, professional accident repair centre. This is an excellent opportunity for someone who takes pride in their work and enjoys being part of a high-performing team. You will play a key role in the repair process, carrying out vehicle strip, fit, and mechanical repairs while ensuring every vehicle is returned to pre-accident condition.
Key Responsibilities:
- Carry out the removal and refitting of vehicle components to support high-quality body repairs
- Dismantle and rebuild vehicles efficiently, following repair methods and manufacturer guidelines
- Accurately identify and report any additional damage not included within the original estimate
- Perform mechanical repairs including suspension work, four-wheel alignment, and diagnostic procedures
- Complete GEO and ADAS-related tasks where required
- Work collaboratively with colleagues to ensure repairs are completed on time and to a high standard
- Maintain a strong focus on quality, safety, and customer satisfaction throughout the repair process
Requirements:
- Previous experience working as an MET Technician, Strip Fitter, or Vehicle Technician within an accident repair environment
- ATA or NVQ qualifications would be advantageous but are not essential
- Hybrid and Electric Vehicle training would be beneficial
- ADAS experience or accreditation would be highly desirable
- Excellent attention to detail and a commitment to delivering first-class repairs
- Strong team player with the ability to perform well in a fast-paced workshop environment
Benefits:
- Pension Scheme
- Ongoing training and development opportunities
- Work within a well-equipped, manufacturer-approved repair centre
- Career progression opportunities within a successful national organisation
- Supportive management team and positive working environment
If you are an experienced MET Technician looking to join a forward-thinking business that values its employees and offers genuine long-term career prospects, we'd love to hear from you. Please send us your CV by clicking apply now or by contacting Piam Pishgoo on 01202 552915 / piam@holtautomotive.co.uk to discuss further.
MET Technician / Strip Fitter - up to £25 p/h Bodyshop Binfield
MET Technician / Strip Fitter / Bodyshop Technician / Mechanical Electrical Trim Technician....Read more...
Maintenance Engineer
Castleford
£49,000 - £50,000 Basic + OTE £55,000+ + Days + Optional Overtime + Stability + Free Parking + Internal Training + Enhanced Pension Scheme + Store Discounts + Vehicle Scheme + Health Support Service
Fantastic opportunity for a Maintenance Engineer to join a large, highly successful organisation offering exceptional job security, stability and a leading overall package. Work a days-based role for an established UK food manufacturer turning over more than £1 billion, with the backing, investment and security of a major business while still enjoying a close-knit, family feel where employees are genuinely valued and looked after.
This is an excellent opportunity for a Maintenance Engineer looking for a long-term position with great work-life balance, £55,000+ earning potential and an excellent benefits package. You'll work on modern manufacturing equipment within a supportive engineering team, benefiting from ongoing investment, internal training and optional overtime. If you want the security and benefits of a blue-chip company without losing the friendly team environment, this is the ideal role.
Your Role As A Multi-Skilled Maintenance Engineer:
Mechanical and electrical fault finding
Planned preventative maintenance (PPM)
Reactive maintenance and breakdowns
Working on modern manufacturing equipment
Days-based position
Optional overtime available
As A Multi-Skilled Maintenance Engineer You'll Need:
Experience as a Multi-Skilled Maintenance Engineer
Mechanical and electrical maintenance experience
Engineering qualification
FMCG / manufacturing background
Commutable to Castleford
Keywords: Multi Skilled Maintenance Engineer, Maintenance Engineer, Multi Skilled Engineer, FMCG, Manufacturing, Electrical Engineer, Mechanical Engineer, Fault Finding, PPM, Preventative Maintenance, Shift Maintenance Engineer, Manufacturing Engineer, Wakefield, Normanton, Castleford, Leeds, Featherstone, Pontefract
Please apply to Charlie at Future Engineering Recruitment or call 07458 163044.
This vacancy is being advertised by Future Engineering Recruitment Ltd. The services of Future Engineering Recruitment Ltd are that of an Employment Agency.
....Read more...
Mechanical Design Engineer – Genomics Instrumentation – Cambridge
A growing biotechnology company, based in Cambridge, is currently looking for an experienced Mechanical Design Engineer to support the development of cutting-edge genomics instrumentation.
You will be working within a multidisciplinary team of engineering experts, including physicists, electronics engineers, software developers, and life sciences specialists. You’ll be a key member of the team, contributing to the design and development of innovative devices that enable high-throughput genomic workflows and precision diagnostics.
We’re looking for someone with experience in product design and development, ideally within medical devices, diagnostics, or scientific instrumentation. A background in mechanical engineering is essential, and experience working in regulated environments (ISO 13485, FDA QSR) would be highly beneficial.
The ideal candidate will have a few years of industry experience and be looking to take the next step in their career. You’ll be involved in the full product lifecycle—from concept development and prototyping through to design for manufacture and product launch.
You’ll be rewarded with a competitive salary, regular salary reviews, bonus scheme, pension, life assurance, and other excellent benefits you’d expect from a growing, forward-thinking organisation.
This is a fantastic opportunity to join a company that invests in its people and is making a real impact in the field of genomics. Due to expected interest, I recommend applying now to avoid missing out.
For more information, please feel free to call Andrew Welsh, Director of Medical Devices and Scientific recruitment at Newton Colmore Consulting, on +44 121 268 2240, or make an application and one of our team will be in touch.
Newton Colmore Consulting is a specialist recruitment company within the Medical Devices, Scientific Engineering, Scientific Software, Robotics, Science, Electronics Design, New Product Design, Human Factors, Regulatory Affairs, Quality Assurance and Field Service Engineering sectors.....Read more...
Mechanical Engineer – Cancer Instrumentation – Cambridge
A growing division within an established Medical Devices organisation in South Cambridge is currently seeking an experienced Medical Devices Mechanical Engineer to contribute to their ongoing development of cutting-edge cancer instrumentation, aimed at improving patient recovery rates.
This company is expanding its team dedicated to Medical Devices Instrumentation, primarily focusing on Cancer Instrumentation. Ideally, they are looking for candidates with prior experience in Medical Devices Instrumentation. However, they are open to considering candidates who have worked on other types of Medical Devices, provided they were developed to ISO 13485 standards.
The company offers state-of-the-art labs and workshops to facilitate your success in developing these life-saving technologies. You will also receive ongoing training and development to ensure you stay at the forefront of technological advancements.
In addition to relevant experience, it is expected that you hold a relevant degree in mechanical engineering or a related field that has prepared you for a career within the Medical Devices sector.
As mentioned, you will be working on life-saving technologies, benefiting from continued career and skills development, and rewarded with an excellent starting salary, pension, life assurance, bonuses, healthcare, dental coverage, and other benefits typically associated with large multinational organisations.
Due to the anticipated high level of interest in this role, we recommend that if you are interested, you submit your application promptly and specify the types of Medical Devices you have experience working on.
For further information, please do not hesitate to call Andrew Welsh, Director of Medical Devices Recruitment and Scientific Recruitment Specialist at Newton Colmore, on +44 121 268 2240, or submit an application, and a member of our Newton Colmore team will contact you.
Newton Colmore Consulting is a specialist recruitment company within the Medical Devices, Scientific Engineering, Scientific Software, Robotics, Science, Electronics Design, New Product Design, Human Factors, Regulatory Affairs, Quality Assurance, and Field Service Engineering sectors.....Read more...
Trainee Automation Technician - Wetherby - Global Facilities Management Organisation CBW Staffing Solutions are currently recruiting for a Trainee Automation Technician to join a specialist engineering team on a high-profile, automated warehouse site based in Wetherby. This is an excellent opportunity for a time-served Junior Electrician or Junior Mechanical Maintenance Engineer looking to break into automation, with full training and long-term career progression on offer. PackageCompetitive salary between £32,000 - £34,000 per annum (depending on experience)Core hours are Monday - Friday (40 hours per week)25 days annual leave plus bank holidaysGenerous workplace pension schemeTraining, development & progression opportunitiesResponsibilitiesCarry out planned preventative maintenance (PPM) and reactive repairs on automated cranes, conveyors, and warehouse systemsAssist with fault finding on automation and control systems (PLC-based equipment)Support the operation and monitoring of automated storage systemsWork safely at height and within confined spaces (full training provided)Enter and work within low-oxygen environments in line with strict safety proceduresComplete maintenance records and reports accurately (CAFM systems where applicable)Liaise with the wider engineering team to ensure minimal downtime and efficient operationSupport general site maintenance tasks across the wider facility when requiredParticipate in training and development to build automation knowledge and competencyOption to join call-out rota once fully trainedRequirementsElectrical or Mechanical Engineering apprenticeship (essential)Basic understanding of mechanical and/or electrical systemsComfortable working at height (up to 27m) – full training providedAbility to work within a low-oxygen environment (14.5% O₂) following strict safety proceduresKeen interest in developing skills within automation and controlsIf you're looking to move into automation engineering with full support and training, apply today or contact Amy at CBW Staffing Solutions for more information.....Read more...
Foot Mobile Maintenance Engineer - Client Direct - London - Commercial Offices - Up to £50KThe OpportunityWe’re offering an exciting opportunity for an experienced Maintenance Engineer to join one of the fastest-growing companies of it's type in London. Currently there are opportunities within the organisation for Fabric Engineers, Electrical Engineers and Mechanical Engineers due to growth within the company. As a Foot Mobile Engineer, you'll work across a portfolio of high-end commercial office buildings. You'll also assist with quoted works and tenant maintenance projects. This role offers variety, autonomy, and clear progression into senior roles such as Supervisor.Key ResponsibilitiesProvide engineering support across multiple commercial office sitesCarry out both electrical and mechanical PPM (Planned Preventative Maintenance) and reactive maintenanceSupport tenant and project works, ensuring smooth delivery of additional servicesManage and liaise with subcontractors for specialist servicesEnsure compliance with all statutory requirements, including:Fire alarmsEmergency lightingWater treatmentHVAC systems, including AHUs and FCUsComplete reports, logbooks, and assist with monthly compliance documentationOccasionally work out-of-hours or attend call-outs (where applicable)Salary & Package£37,000 - £50,000 depending on discipline, certificates and experienceZones 1–2 TravelcardOvertime available28 days annual leave + bank holidaysPrivate medical insurance (after probation)Cycle to Work SchemeSeason Ticket Loan Training and genuine career development opportunities (pathway to Supervisor roles and beyond)What We're Looking ForCity & Guilds Level 2 & 3 IF Electrical or Mechanical (or equivalent)Previous experience in commercial building maintenanceGood understanding of health & safety and statutory complianceConfident, client-facing, and reliable with strong communication skillsWilling to travel within Zones 1–2 and work semi-static across key sitesIf you are interested please get in touch with Fin from CBW Staffing Solutions....Read more...
MET Technician / Strip and Fit Vacancy:
Ref - 328379
Our client, who are a busy Bodyshop group are currently looking to expand their team with the addition of an experienced Strip Fit / MET Technician in the Telford area.
Key MET Technician / Strip Fitter Roles and Responsibilities:
- Removing and refitting parts to ensure body repairs are to a very high standard
- Dismantle and rebuild vehicles as instructed
- To report unseen damage, absent from estimate as soon as its identified
- 4 wheel alignment, Suspension work, GEO, diagnostics and all mechanical work
Ideal Requirements as a MET Technician / Strip Fitter:
- Have Previous experience as an MET Technician / Strip Fitter
- ATA/NVQ is advantageous but not essential
- Mechanical knowledge
- Hybrid Trained
Benefits
- Paying up to £40,000 per annum plus bonus
- Team bonus
- Monday to Friday
- 22 days holiday per year going up to 26 with time served, plus bank holidays.
- Health and rewards scheme
- Pension
- Plus much more
- Permanent Vacancy
If you want to hear more about the MET Technician / Strip Fitter role, please send us your CV by clicking apply now or by contacting Richard on 07590309374 / richard@holtautomotive.co.uk to discuss further.
....Read more...
Multi-TraderHarlow
£35,000 - £45,000 + Overtime + Training Courses + Progression + Company Van + Fuel Card + Tools + Pension + Holidays + VarietyBuild a long-term career as a Multi-Trader with an established and growing company that values skilled engineers and offers excellent training, job security and genuine progression. This is a great opportunity for someone with a maintenance background who has developed wider multi-trade skills and enjoys working on a variety of building services and maintenance tasks.
You'll be responsible for attending customer sites, carrying out planned and reactive maintenance, and using your plumbing and general maintenance experience to diagnose and resolve issues. The company offers a stable working environment, ongoing technical development and the opportunity to build a long-term career within a supportive engineering team.
Your Role As A Multi-Trader Will Include:
Carrying out planned and reactive maintenance across customer sites.
Plumbing repairs & maintenance
General building maintenance and multi-trade repairs, mainly in bookmakers
Basic carpentry tasks
Commutable the Harlow area
The Successful Multi-Trader Will Have:
A general maintenance / multi-trade work background (E.G plumbing, Carpentry
Experience carrying out reactive and planned maintenance.
Good practical and problem-solving skills.
Comfortable working independently at customer sites.
Full UK driving licence.
Ability to commute to the Harlow areaKeywords: Multi-Trader, Multi Skilled Engineer, Multi Skilled Maintenance Engineer, Maintenance Engineer, Maintenance Technician, Maintenance Operative, Plumbing Engineer, Plumber, Maintenance Plumber, Commercial Plumber, Facilities Engineer, Facilities Maintenance Engineer, Building Services Engineer, Building Maintenance Engineer, Fabric Engineer, Mobile Maintenance Engineer, Reactive Maintenance Engineer, PPM Engineer, Mechanical Engineer, Service Engineer, Plumbing Maintenance, General Maintenance, Handyman, Multi Skilled Technician, Building Engineer, Maintenance Operative, Facilities Technician, Facilities Operative, Mechanical Maintenance Engineer, Mechanical Technician, Electrical Maintenance Engineer, Electrical Engineer, M&E Engineer, M&E Maintenance Engineer, Site Maintenance Engineer, Mobile Engineer, Field Service Engineer, Property Maintenance Engineer, Property Maintenance Technician, Estate Maintenance Engineer, Caretaker, Building Operative, Maintenance Supervisor, Hard Services Engineer, Hard FM Engineer, Facilities Technician, HVAC Engineer, Heating Engineer, Pipefitter, Mechanical Fitter, Plumbing Technician, Commercial Maintenance Engineer, Reactive Engineer, Planned Maintenance Engineer, PPM Technician, Chelmsford, Harlow, Basildon, Colchester, Brentwood, Braintree, Witham, Maldon, Epping, Harlow, Loughton, Waltham Abbey, Bishop's Stortford, Great Dunmow, Halstead, Billericay, Wickford, Rayleigh, Southend-on-Sea, Romford, Grays, Thurrock, Tilbury, Brentwood, Ongar, Chipping Ongar, Ingatestone, Chelmsford, Essex, Hertfordshire, East London, North East London.
....Read more...
Mechanical Desing EngineerNorwich - On site Full-time, PermanentSalary: £30k to £48k per year + BenefitsSchedule: Monday to Friday 37.5 Hours per week. With half day Fridays. PPI Engineering Ltd design and manufacture large bespoke HV motors and generators predominantly for the power industry. Operating in over 50 countries we supply innovative and reliable engineering solutions to our customers.Currently we are looking to recruit a driven design engineer to join our dynamic CAD department, responsible for the integration of mechanical and electrical design solutions, into feasible products for manufacture.Job OverviewWork with mechanical and electrical engineers to understand their requirements and refine your design into a bespoke design solution ready for production. This could be for complete machines or individual components. From brand new concept designs for high end application or reverse engineering critical parts to keep an obsolete machine running.Liaising with production to see projects through the manufacture and to customer delivery adopting a hands-on approach though out the projectWork with out in house manufacturing facilities to improve production methods with custom tooling.Through our sister companies the chance to get involved in variety of other industries including Steel production, Farm machinery, Earth moving equipment and mining sector to name but a few. (API engineering, API Capacitors)Responsibilities and Duties
Production of accurate manufacturing drawings.Production of full assembly drawings & parts lists from manufacturing drawings using SolidWorks PDMModifications and revision of design drawings.Ability to understand engineering materials, properties & manufacturing processes of these materials.Aid production with troubleshooting and design improvements.
Qualifications
Minimum of HND in mechanical engineering or related subjects.Experience in drawing office methods & practices combined with good factory floor knowledge of machining & assembly processes.Good all round knowledge of 2D/3D CAD systems as well as Microsoft Office.Experience with SolidWorks / SolidWorks PDM or similar CAD software.Ability to work as part of a strong team, as well as making informed decisions when working alone at site, either in the UK or abroad.Certifications of any training, in house or otherwise, would be advantageous.Full driving license & current passport would be a distinct advantage.Experience working with HV rotating machinery.UK national.
Benefits
Enhanced pension contributionOpportunity to travelTraining where necessaryVast experience opportunities across our sister companiesDiscounted gym membership
INDHS Equals One is an advertising and recruitment agency working on behalf of our client to promote this vacancy. You may be contacted directly by the employer should they wish to progress your application. Due to the number of applications we receive, we are unable to provide specific feedback if your application is unsuccessful.....Read more...
Trainee Engineering Operative
Location: HayesSalary: £25,000 – £28,000 + £4,500 shift allowanceShift: 4 on, 4 offIndustry: AerospaceFull Training & Career Progression Provided
Looking to start a career in engineering?
We’re looking for a practical, hands-on individual who wants to develop a long-term career within the aerospace engineering industry.
This is a trainee-level opportunity, so you don’t need to already be an experienced Electroplater. It could be a great next step if you have some experience working with hand tools, mechanical components or within a workshop/engineering environment and are keen to learn a skilled engineering trade.
You may currently be working as a Mechanic, Workshop Operative, Engineering Assistant, Production Operative, Technician or similar hands-on role and be looking for an opportunity with structured training and progression.
Working within a specialist aerospace engineering environment, you’ll receive full training in electroplating and surface treatment processes used on aircraft components.
What you’ll be doing
Assisting experienced Electroplaters with day-to-day engineering and plating activities
Learning how to prepare, clean, mask and treat aerospace components
Supporting electroplating processes including cleaning, plating and rinsing
Learning specialist processes including grit blasting, component stripping and surface preparation
Handling components using appropriate slings, jigs and manual handling techniques
Learning to safely operate specialist equipment, including overhead cranes
Following engineering drawings, process instructions and overhaul manuals
Working to strict health, safety, environmental and quality procedures
Building your practical experience and technical knowledge through structured on-the-job training
What we’re looking for
We’re particularly interested in people who are practical, mechanically minded and keen to build a career in engineering.
You could be a good fit if you have:
Some previous exposure to an engineering, mechanical, workshop or production environment
Confidence using hand tools or working practically with mechanical components
A genuine willingness to learn a skilled engineering trade
Good attention to detail and the ability to follow processes and instructions
A strong approach to health and safety
Good communication and teamwork skills
GCSE-level education or equivalent
Previous aerospace or aviation experience would be advantageous but not essential.
What’s on offer
£25,000 – £28,000 basic salary
£4,500 annual shift allowance
Total package of up to £32,500
4 on, 4 off shift pattern
Full technical and mandatory training provided
Opportunity to develop specialist engineering skills within the aerospace sector
Overtime opportunities following completion of probation
Excellent opportunity for someone looking to establish and progress their career within engineering
This is an ideal opportunity if you’re currently in a practical or mechanical role but feel you’ve reached a ceiling and want the chance to learn, develop and progress within a specialist aerospace engineering environment.....Read more...
Day Shift Engineer – 4 on 4 off - Large Tourist Attraction –Tottenham Court Road, London –£44,000 Per annumExciting opportunity to work for an established FM Property company based in London. CBW is currently recruiting for a day-shift engineer to be based at a large tourist attraction by Tottenham Court Road. The successful candidate will be a fully qualified electrical or mechanical engineer with a proven track record in commercial/property building maintenance and be able to turn their hand to a variety of maintenance tasks. He or she will be required to carry out electrical or mechanical planned and reactive maintenance / Installation across this large static site. Working with the maintenance team on site. He or she will be required to have an understanding/hands-on experience of the below. In return, the company offers a competitive salary, further training, overtime and the chance to work at this unique and interesting site.Package & Hours of WorkUp to £44,0004 on 4 off, Shift Pattern 07:00 am to 19:00 pm/ 10:00 am to 22:00 pmUniform and Tools ProvidedCycle to work scheme22 days holidayOvertime AvailablePensionInternal Progression & DevelopmentKey Duties & ResponsibilitiesEscort specialist subcontractorsEnsure that the Contractual efficiently meets all the relevant KPI & SLA requirements.Undertake all allocated tasks and perform them in a timely and professional manner.Be proactive in identifying and reporting faults with building services equipment and take steps to resolve them.Be proactive to ensure all H&S issues are reported/escalated as required.Maintain informal communications with Client staff members related to service levels and issues.Report service affecting issued to the site management team for formal communication with the client.Remain flexible with regard to site attendance and tasks undertaken within personal competency.Electrical Duties:Carry out Electrical PPM's and reactive maintenance Lighting – lamp changes, ballast changes, simmtronic/Phillips lightingEmergency light testingPower distributionElectrical fault-findingSmall works – new sockets, new lights, new circuitsTransformersStar Delta StartersMinor installationsMechanical Duties:Monitor mechanical plantPumps, Motors, Seals, BearingsAir Conditioning - Air Handling Units / Fan Coil Units (Filter changes, cleaning)Water Treatment (Temperature checks / Not dosing)Plumbing - Unblocking toilets, replacing taps, washers etcMonitor the BMS systems.Basic electrical duties (Lamp changes etc)General building fabricRequirementsElectrical qualified level 2&3 (C&G, NVQ etc) with 18th Edition or Mechanically qualified level 2 (C&G, NVQ etc)Experience working in a large commercial buildingYou must be able to provide copies of your trade certificates (Essential)A proven track record in commercial building maintenanceMulti-skilledGood communication skillsExcellent customer skillsMust be able to get to the site for 07:00 am startPlease reach out to Alex Denton of CBW Staffing Solutions to avoid missing out on this opportunity!....Read more...
Mobile Plant Fitter
Hours: 40 per week (MondayFriday)
Salary: £42,000 £49,000 DOE + van & D2D pay
Employment Type: Full-time, Permanent
An established plant hire company is seeking a skilled Mobile Plant Fitter to join their busy team. This role offers consistent weekday hours with overtime available and the chance to work on a variety of heavy plant machinery in a professional and supportive setting.
Main Duties:
- Service, maintain, and repair heavy plant equipment, including excavators, dozers, dumpers, and diggers.
- Identify mechanical, hydraulic, and electrical faults and carry out timely repairs.
- Accurately complete job cards, service records, and associated documentation.
- Work independently on-site or collaboratively within the workshop team.
Candidate Requirements:
- Proven experience as a Plant Fitter, Heavy Plant Engineer, or Plant Mechanic.
- Strong understanding of hydraulics, diesel engines, and electrical systems.
- NVQ/City & Guilds Level 3 in Mechanical, Plant, or Agricultural Engineering, or equivalent experience.
- Confident fault diagnosis and problem-solving skills.
- Full UK driving licence.
Benefits:
- MondayFriday, 40-hour workweek
- Paid overtime opportunities
- Ongoing training and professional development
- Company van with fuel card and paid travel
- Secure long-term position with a reputable plant hire company
Please hit apply or reach out to Pete for further information - 07485986178 / peter@holtautomotive.co.uk....Read more...
