Propulsion Test Engineer with mechanical fitting expertise required. This position involves overseeing the design implementation, conducting Hot Fire Testing programs.
Key Responsibilities
Support in test activities across all hot fire and environmental test facilities.
Ensure comprehensive understanding and knowledge of all aspects of the firing sites, including site preparation, fuel and oxidiser handling, pressure systems, instrumentation, control systems, space thruster theory, steam boiler operation, data analysis, site and system safety.
Develop test, maintenance, and setup procedures for all test activities.
Requirements
Proficiency in mechanical fitting, preferably attained through completion of an apprenticeship or relevant experience within an engineering-oriented environment. Ideally holds qualifications equivalent to a graduate-level course in a related engineering field from OU or similar institutions. Must have undergone at least Level 4 training on the ....Read more...
Propulsion Test Engineer with mechanical fitting expertise required. This position involves overseeing the design implementation, conducting Hot Fire Testing programs.
Key Responsibilities
Support in test activities across all hot fire and environmental test facilities.
Ensure comprehensive understanding and knowledge of all aspects of the firing sites, including site preparation, fuel and oxidiser handling, pressure systems, instrumentation, control systems, space thruster theory, steam boiler operation, data analysis, site and system safety.
Develop test, maintenance, and setup procedures for all test activities.
Requirements
Proficiency in mechanical fitting, preferably attained through completion of an apprenticeship or relevant experience within an engineering-oriented environment. Ideally holds qualifications equivalent to a graduate-level course in a related engineering field from OU or similar institutions. Must have undergone at least Level 4 training on the ....Read more...
JOB DESCRIPTION
Euclid Chemical is a fully owned subsidiary of RPM International (NYSE: RPM), one of the world's largest coatings companies. With over 110 years of experience, we provide innovative solutions to the construction and restoration markets through our extensive range of treatments, sealants, coatings, sealers, and decorative products. Recognized as a 2024 NE Ohio Top Workplace by Energage, Euclid Chemical prides itself on fostering a people-first culture that values collaboration, respect, and growth.
The Euclid Chemical Company is now hiring an experienced Maintenance Technician to join our team in Cleveland, OH This position is primarily responsible for performing preventative maintenance (PM) tasks to ensure the ongoing reliability, safety, and performance of plant equipment. In addition to scheduled PMs, this role involves troubleshooting, diagnosing, and repairing mechanical, pneumatic, hydraulic, and electrical systems as needed to minimize unplanned downtime. Technicians will also assist with equipment installations, fabrication, and continuous improvement efforts.
Responsibilities and Duties:
Perform scheduled preventative maintenance tasks to reduce downtime and improve equipment life
Weld and fabricate components for equipment repair or modification as needed
Troubleshoot, repair, and rebuild a wide variety of mechanical, pneumatic, and hydraulic equipment
Diagnose and repair AC/DC electrical systems using meters, schematics, and other test equipment
Read and interpret mechanical, electrical, hydraulic, and pneumatic schematics
Accurately complete and update maintenance records using SAP's Plant Maintenance Module
Assist with identifying repairs, documenting short- and long-term needs
Maintain a clean, organized, and safe maintenance work area
Operate mobile equipment such as forklifts, man lifts, and scissor lifts
Work at heights, in confined spaces, and in various environmental conditions
Comply with all OSHA, company, and site-specific safety policies and procedures
Perform other duties as assigned by the Maintenance Supervisor
Education, Experience, and Qualifications:
5+ years of hands-on industrial maintenance experience in a manufacturing or similar environment
Strong mechanical knowledge, including troubleshooting and repair of pumps, gearboxes, motors, chains, sprockets, pulleys, and belts
Proficient in reading and interpreting mechanical, electrical, hydraulic, and pneumatic schematics
Skilled in welding, fabrication, and use of cutting equipment
Basic computer skills, including the use of email and maintenance
High school diploma or GED required; technical certifications or training is a plus
Requirements:
Must be able to work Monday - Friday from 2:00 PM to 10:30 PM, with occasional overtime based on production and maintenance needs.
Self-motivated individual who can work independently with minimal supervision.Physical Requirements:
The ability to stand, walk, lift, and move for extended periods. Regular activities include standing, walking, using hands to handle or feel objects, reaching with arms, speaking, and hearing. Frequent actions include climbing or balancing, while occasional tasks may involve sitting, stooping, kneeling, crouching, or crawling.
The technician must be able to lift and move up to 50 pounds.
Vision requirements include close vision, distance vision, peripheral vision, depth perception, and the ability to adjust focus. The work environment may involve exposure to moving mechanical parts and occasional vibration, with moderate noise levels typical of an industrial setting.
WHY JOIN EUCLID CHEMICAL?
Joining our team means gaining access to a suite of competitive benefits including:
$28 - $32 per hour plus annual employee bonus program
Medical, Dental and Vision coverage
Life Insurance, Disability, Parental Leave
401k with company match
Defined benefit pension plan
Vacation and holiday time
Qualified applicants will receive consideration for employment without regard to their race, color, religion, national origin, sex, protected veteran status or disability.Apply for this ad Online!....Read more...
JOB DESCRIPTION
Euclid Chemical is a fully owned subsidiary of RPM International (NYSE: RPM), one of the world's largest coatings companies. With over 110 years of experience, we provide innovative solutions to the construction and restoration markets through our extensive range of treatments, sealants, coatings, sealers, and decorative products. Recognized as a 2024 NE Ohio Top Workplace by Energage, Euclid Chemical prides itself on fostering a people-first culture that values collaboration, respect, and growth.
The Euclid Chemical Company is now hiring an experienced Maintenance Technician to join our team in Cleveland, OH This position is primarily responsible for performing preventative maintenance (PM) tasks to ensure the ongoing reliability, safety, and performance of plant equipment. In addition to scheduled PMs, this role involves troubleshooting, diagnosing, and repairing mechanical, pneumatic, hydraulic, and electrical systems as needed to minimize unplanned downtime. Technicians will also assist with equipment installations, fabrication, and continuous improvement efforts.
Responsibilities and Duties:
Perform scheduled preventative maintenance tasks to reduce downtime and improve equipment life
Weld and fabricate components for equipment repair or modification as needed
Troubleshoot, repair, and rebuild a wide variety of mechanical, pneumatic, and hydraulic equipment
Diagnose and repair AC/DC electrical systems using meters, schematics, and other test equipment
Read and interpret mechanical, electrical, hydraulic, and pneumatic schematics
Accurately complete and update maintenance records using SAP's Plant Maintenance Module
Assist with identifying repairs, documenting short- and long-term needs
Maintain a clean, organized, and safe maintenance work area
Operate mobile equipment such as forklifts, man lifts, and scissor lifts
Work at heights, in confined spaces, and in various environmental conditions
Comply with all OSHA, company, and site-specific safety policies and procedures
Perform other duties as assigned by the Maintenance Supervisor
Education, Experience, and Qualifications:
5+ years of hands-on industrial maintenance experience in a manufacturing or similar environment
Strong mechanical knowledge, including troubleshooting and repair of pumps, gearboxes, motors, chains, sprockets, pulleys, and belts
Proficient in reading and interpreting mechanical, electrical, hydraulic, and pneumatic schematics
Skilled in welding, fabrication, and use of cutting equipment
Basic computer skills, including the use of email and maintenance
High school diploma or GED required; technical certifications or training is a plus
Requirements:
Must be able to work Monday - Friday from 2:00 PM to 10:30 PM, with occasional overtime based on production and maintenance needs.
Self-motivated individual who can work independently with minimal supervision.Physical Requirements:
The ability to stand, walk, lift, and move for extended periods. Regular activities include standing, walking, using hands to handle or feel objects, reaching with arms, speaking, and hearing. Frequent actions include climbing or balancing, while occasional tasks may involve sitting, stooping, kneeling, crouching, or crawling.
The technician must be able to lift and move up to 50 pounds.
Vision requirements include close vision, distance vision, peripheral vision, depth perception, and the ability to adjust focus. The work environment may involve exposure to moving mechanical parts and occasional vibration, with moderate noise levels typical of an industrial setting.
WHY JOIN EUCLID CHEMICAL?
Joining our team means gaining access to a suite of competitive benefits including:
$28 - $32 per hour plus annual employee bonus program
Medical, Dental and Vision coverage
Life Insurance, Disability, Parental Leave
401k with company match
Defined benefit pension plan
Vacation and holiday time
Qualified applicants will receive consideration for employment without regard to their race, color, religion, national origin, sex, protected veteran status or disability.Apply for this ad Online!....Read more...
M&E Engineer – Shopping CentreLocation: City Centre of NottinghamSalary: £20.00 per hourJob Type: Temporary & ongoingHours: 4 on/4 off, 7am–7pm CBW Staffing Solutions are currently recruiting for a Multi-Skilled M&E Engineer to provide temporary cover for long-term sickness at a busy shopping centre. The successful candidate will have a strong Facilities Management background, with a mechanical or electrical qualification, and experience carrying out building services maintenance within a commercial environment. Key ResponsibilitiesCarrying out planned preventative maintenance (PPM) and reactive maintenance.Diagnosing faults and completing repairs across building services.Maintaining mechanical or electrical systems safely and efficiently.Updating maintenance records and tasks using the platform.Supporting the day-to-day maintenance of the shopping centre.RequirementsMechanical or electrical qualification.Previous Facilities Management experience is essential.Experience in a commercial building environment is desirable.Flexibility to work a 4 on/4 off shift pattern, including some weekends.Additional InformationImmediate start available.City centre location with good public transport links.No on-site parking available.How to Apply If you are an experienced M&E Engineer available immediately or coming to the end of a contract, please apply with your up-to-date CV to be considered for this opportunity.....Read more...
Trainee Field Service Engineer
Kingston upon Thames
£35,000 - £45,000 Basic + Uncapped Overtime (OTE £70,000) + Specialist Technical Training + Clear Career Progression + Company Vehicle + Fuel Card + Pension + Holidays
Build your engineering career with specialist technical training, clear progression and uncapped overtime offering earnings of up to £70,000. Join an established automatic door specialist where you can develop in-demand technical skills, learn from experienced engineers and progress into a fully qualified Field Service Engineer role while maximising your earning potential.
This is an excellent opportunity for someone with a hands-on mechanical or electrical background who wants to develop specialist engineering skills. You will receive full training from experienced engineers, gaining practical experience working on automatic door systems while building your technical knowledge and earning potential. You will be joining a supportive team that invests in its engineers, offering ongoing development, increased responsibility and genuine opportunities to progress your career as your skills develop as a trainee field service engineer
The Role Of The Trainee Field Service Engineer Will include:
installation, servicing and maintenance of automatic doors
Learn to diagnose faults and carry out mechanical and electrical repairs
Work alongside experienced engineers on customer sites
Travel to customer sites across the Kingston area
The Successful Trainee Field Service Engineer Will Have:
Hands-on mechanical or electrical experience, with confidence using hand tools
A full UK driving licence
A genuine interest in developing a career in engineering
The ability to commute to Kingston upon Thames / New Malden and travel to customer sites across the surrounding area
Keywords: Trainee Field Service Engineer, Junior Field Service Engineer, Trainee Engineer, Automatic Door Engineer, Automatic Door Technician, Door Service Engineer, Door Installation Engineer, Industrial Door Engineer, Access Control Engineer, Mechanical Engineer, Electrical Engineer, Maintenance Engineer, Installation Engineer, Service Technician, Engineering Trainee, Field Technician, Electromechanical Engineer, Technical Service Engineer, Automatic Sliding Doors, Automatic Swing Doors, Revolving Doors, Access Automation, Fault Finding, Mechanical Repairs, Electrical Repairs, Engineering Training, Field Engineering, Mobile Engineer, Junior Maintenance Engineer, Trainee Maintenance Engineer, Garage Door Engineer, Roller Shutter Engineer, Gate Engineer, Lift Engineer, Lift Service Engineer, Security Systems Engineer, Building Services Engineer, Preventative Maintenance, Reactive Maintenance, Breakdown Engineer, Service and Installation Engineer, Technical Support Engineer, Engineering Apprenticeship, Engineering Jobs, Kingston upon Thames, Kingston, New Malden, Surbiton, Tolworth, Chessington, Worcester Park, Raynes Park, Wimbledon, Morden, Sutton, Epsom, Ewell, Esher, Thames Ditton, Hinchley Wood, Hampton Wick, Hampton, Teddington, Twickenham, Richmond, Isleworth, Hounslow, Walton-on-Thames, Weybridge, Leatherhead, Putney, Roehampton, Southfields, Wandsworth, South West London, Surrey.
....Read more...
Electrical or Mechanical Maintenance Engineer - Battersea, South West London - Up to £45,000Are you bored of working in an office?Would you like a role with NO CALL OUT!Are you Electrical , Plumbing or Mechanically qualified?Exciting opportunity to work for an established FM Property company based in Battersea, South West London. I am currently recruiting for an Electrical or Mechanical Maintenance Engineer / plumber to be based at a large residential estate situated by Battersea, South West London. The successful candidate will be a fully qualified Electrical or Mechanical Maintenance Engineer or plumber with a proven track record in commercial / property building maintenance. He or she will be required to carry out M&E/Fabric planned and reactive maintenance / Installation across this large static site.Working with the maintenance team on site (3 Engineers). He or she will be required to have an understanding/hands on experience of the below. Our client is happy to consider mechanical engineers or plumbers who have completed their apprenticeships (Must have C&G Level 2 as a minimum) who have some commercial building maintenance experience but want to learn. In return the company are offering a competitive salary, further training, overtime and the chance to work at this very unique and interesting site.Lighting (Small installation, Fault-finding, Lamping, Changing ballast, Control panel, Power distribution)Emergency lightingAir Conditioning - Air Handling Units / Fan Coil Unit (Filter changes, cleaning)Chillers - Re-setWater Treatment (Temperature checks)Plumbing - Unblocking toiletsBMS System - Monitor (i.e. Hot & Colds)UPS Systems - Monitor / Take readingsGeneral building fabricStatatory Compliance HIU'sHours of workMonday to Friday - 08:00am to 17:00pm (40 hour week)RequirementsElectrically, Mechanically or Plumbing qualified - You must be able to provide copies of your trade certificatesCity & Guilds/NVQ Level 2 & 3A proven track record in commercial or property maintenanceHigh End Residential ExperienceExcellent customer service skillsHappy to cover a large estateHonest, hard working and reliablePackage£45,000 depending on experienceOvertime available23 days holiday + BH Company Pension NO CALL OUTPlease send your CV to Dan Barber at CBW Staffing Solutions for more Information!....Read more...
We are looking for a Mechanical Design Engineer to support the design and development of subsea choke and valve systems used in complex offshore environments.
Responsibilities
Design and develop subsea choke and valve systems, including specifications and documentation
Lead verification, validation, and performance analysis activities
Establish and maintain product standards across projects
Collaborate with cross-functional teams to improve performance and manufacturability
Provide technical support to manufacturing and resolve engineering issues
Manage multiple projects and deliver high-quality outputs on time
Mentor junior engineers and support team development
Requirements
Degree in Mechanical Engineering or a related discipline
Proven experience in subsea chokes and valves within the energy sector
Strong knowledge of subsea production systems and industry standards
Experience with CAD and engineering systems
Ability to manage multiple priorities in a fast-paced environment
Hybrid working (4 days office and 1 day remote)
....Read more...
We are looking for a Mechanical Design Engineer to support the design and development of subsea choke and valve systems used in complex offshore environments.
Responsibilities
Design and develop subsea choke and valve systems, including specifications and documentation
Lead verification, validation, and performance analysis activities
Establish and maintain product standards across projects
Collaborate with cross-functional teams to improve performance and manufacturability
Provide technical support to manufacturing and resolve engineering issues
Manage multiple projects and deliver high-quality outputs on time
Mentor junior engineers and support team development
Requirements
Degree in Mechanical Engineering or a related discipline
Proven experience in subsea chokes and valves within the energy sector
Strong knowledge of subsea production systems and industry standards
Experience with CAD and engineering systems
Ability to manage multiple priorities in a fast-paced environment
Hybrid working (4 days office and 1 day remote)
....Read more...
Maintenance TechnicianPermanent nights | West Yorkshire | £44,000 plus excellent benefitsEnjoy getting to the root cause of machinery faults? Aqumen Recruitment is recruiting on behalf of an established international manufacturing business looking to strengthen its night shift engineering team.We welcome engineers with either an electrical or mechanical bias. You will work across a varied range of production equipment, from established legacy machinery to modern automated systems, helping improve reliability and keep production running safely.The role
Diagnose faults and repair production machinery, identifying the cause of failures.Respond safely to breakdowns and carry out planned preventative maintenance.Interpret electrical schematics, pneumatic diagrams and mechanical drawings.Carry out PLC fault finding and support equipment reliability improvements.Record maintenance activity accurately using the CMMS system.Follow safe isolation procedures and maintain high standards of safety and housekeeping.A time served engineering apprenticeship and ONC, City & Guilds Level 3 or equivalent qualification.At least two years of maintenance experience in a manufacturing environment.Strong electrical and/or mechanical fault finding skills and PLC diagnostic experience.Experience of root cause analysis and improving equipment reliability.A methodical approach, good organisational and communication skills, and the ability to work independently and within a team.
Salary and benefits
£40,000 per year, with 25 days of holiday plus bank holidays, an excellent pension, life assurance, health benefits, employee support and discounts, subsidised canteen and free onsite parking.Apply today through Aqumen Recruitment for a confidential discussion about the opportunity. ....Read more...
IAG Mechanical Ltd is looking for an experienced Joiner to support our growing installation teams across a number of long-term contracts throughout Bradford and all BD postcode areas.The role will primarily involve working alongside our heating and renewables teams carrying out high-quality finishing and boxing works following boiler, heating and Air Source Heat Pump installations.Typical works will include:
Full heating-system pipework boxingBoiler boxing and cupboardsASHP pipework and associated boxingMaking good following heating installationsRemoval and reinstatement of existing boxing where requiredGeneral joinery and finishing worksWorking within occupied domestic properties and social housingLiaising with our installation teams to ensure jobs are completed to a high standard
We are interested in hearing from experienced joiners/carpenters who can work independently, maintain a good standard of finish and understand the importance of working professionally within customers’ homes.Both positions are available:
Permanent PAYE employmentSubcontract/self-employed basis
Applicants should ideally have their own tools and transport where appropriate. Experience working on social housing, heating contracts, boiler programmes or renewable/ASHP installations would be advantageous.We have a significant and growing workload across Bradford, with opportunities for the right person to become a long-term part of our delivery team.Immediate start available.To apply or discuss rates, please contact IAG Mechanical Ltd with details of your experience and availability.IAG Mechanical Ltd - Heating | HVAC | Renewables | Building Services....Read more...
My client, a leading global business operating in Coding and Marking solutions, are seeking a Test Engineer- Value Analysis & Value Engineering, based in Huntingdon, Cambridgeshire.
The ideal Test Engineer- Value Analysis & Value Engineering, based in Huntingdon, Cambridgeshire will be responsible for driving product cost reduction without sacrificing performance. Other responsibilities will include setting up and running a variety of technical validation projects for existing and new products and the jobholder is responsible for setting up, running and evaluating all the verification aspects of experiments in a safe environment. This includes developing test plans/scripts, setting up test jigs, analysing data, and writing up reports.
This is a challenging and stimulating engineering role working across a variety of different physical materials, electrical/mechanical components, software, high voltages, pressures, and flammable liquids.
The successful Test Engineer- Value Analysis & Value Engineering, based in Huntingdon, Cambridgeshire will have:
An Electronics Engineering qualification and proven ‘hands-on’ engineering in multi-disciplinary teams
Specific prior experience making test jigs and running the validation aspects of engineering projects is advantageous but not critical
Ability to adapt, build and validate industrial components and prototypes
Appreciation of software, electronics, and mechanical engineering is very useful, including sophisticated system integration requiring analytical skills, problem-solving, and ability to read mechanical drawings
APPLY NOW for the Test Engineer- Value Analysis & Value Engineering job based in Huntingdon, Cambridgeshire role by sending your CV to TDrew@redlinegroup.Com or call Tom on 01582 878 848, quoting ref. THD1027. If you have any specific questions about this role, otherwise we always welcome the opportunity to discuss other engineering jobs.....Read more...
MET Technician / Strip Fitter Earn Up to £55,000 Monday to Friday
Location: Dudley
Salary: £55,000 earning potential + overtime
Job Type: Permanent, Full-Time
Reference: 351339
Are you an experienced MET Technician / Strip Fitter looking for a well-paid, permanent position with a busy bodyshop group?
This is an excellent opportunity to join an established and growing accident repair business in Dudley area, where you can put your technical skills to use, earn up to £55,000 per annum and enjoy a Monday-to-Friday working week.
With a team bonus, overtime opportunities and an excellent benefits package, this role offers the chance to build a long-term career in a professional bodyshop environment.
What\'s on offer?
- £55,000 annual earning potential
- Monday to Friday enjoy your weekends!
- Team bonus scheme
- Overtime opportunities to boost your earnings
- 29 days' annual holiday, including public holidays
- Pension contributions
- Enhanced sick pay
- Cycle-to-work scheme
- Employee benefits app
- Permanent position with an established bodyshop group
The Role MET Technician / Strip Fitter
As an MET Technician, you will play a key role in ensuring vehicles are repaired safely, efficiently and to the highest possible standards.
Your responsibilities will include:
- Stripping and refitting mechanical, electrical and trim components during vehicle repairs.
- Dismantling and rebuilding vehicles in line with repair instructions.
- Identifying and reporting any additional or previously unseen damage.
- Carrying out four-wheel alignment, geometry and suspension work.
- Undertaking diagnostic checks and associated mechanical repairs.
- Ensuring all work is completed to the required quality and safety standards.
- Working closely with the wider bodyshop team to maintain an efficient repair process.
What we\'re looking for
We're keen to speak with experienced MET Technicians and Strip Fitters who take pride in their workmanship and understand the importance of quality vehicle repairs.
Ideally, you'll have:
- Previous experience working as an MET Technician, Strip Fitter or Strip & Fit Technician within a bodyshop or accident repair environment.
- Strong mechanical and electrical repair skills.
- Experience with suspension, wheel alignment, geometry and diagnostics.
- Hybrid vehicle training.
- ATA accreditation or an NVQ qualification would be advantageous, but is not essential.
Most importantly, you'll be reliable, technically competent and committed to producing high-quality work.
Interested? Let's have a confidential chat.
Apply today with your CV, or contact Richard Haigh at Holt Automotive Recruitment for a confidential discussion. Call: 07590 309374 or Email: richard@holtautomotive.co.uk
Not sure whether this is the right move for you? Get in touch anyway we're happy to discuss the opportunity and answer any questions before you apply.
Keywords: MET Technician, MET Tech, Strip Fitter, Strip and Fit Technician, Bodyshop Technician, Mechanical Electrical Trim Technician, Accident Repair, Vehicle Technician, Dudley, Birmingham
....Read more...
Working within the Test Group, you will design, develop and assemble test equipment and ground support systems for rocket engines and propulsion systems. You will support testing activities, analyse results and work closely with engineering teams to ensure safe and reliable product performance.
Key Responsibilities
Interpret technical specifications and develop test equipment requirements.
Design and assemble test systems, Ground Support Equipment (GSE) and Electrical Ground Support Equipment (EGSE).
Develop test procedures, equipment setup instructions and maintenance plans.
Carry out testing, risk assessments and safety reviews.
Analyse test data and contribute to technical reports.
Support hot-fire testing and new product development.
Key Requirements
Practical, hands-on mechanical engineering or fitting experience.
Understanding of chemical rocket propulsion and fluid control systems.
Willingness to work in test facilities, cleanrooms and outdoor environments, with occasional extended hours or weekend work.
Degree in Mechanical, Aerospace, Aeronautical Engineering or Physics, or equivalent relevant experience.
Experience with rocket engines, spacecraft propulsion or test equipment design.
Basic electrical engineering knowledge.....Read more...
Subsea Tree Engineer required to work on the delivery of flow control equipment for offshore drilling rig systems as part of a subsea Engineering team
The ideal candidate will have flow control expertise and understand process technologies, you will drive projects execution, liaising and interfacing with both internal and external customers to provide end to end solutions from reservoir to surface. Including the assembly of valves, chokes, and pipes installed on the seafloor to control and monitor the flow of oil or gas from underwater wells.
Requirements
Experience dealing with Subsea Trees, Wellheads, and Drill and Production Systems.
SAP, PLM, MathCad, AutoCad or Inventor 3D CAD package fluency.
A Bachelor or MEng degree in Mechanical or Subsea Engineering.
Responsibilities
Design and Documentation of high level engineering designs, schematics, assembly drawings, specifications and testing procedures for underwater subsea trees.
Managing project deliverables
Perform mechanical and hydraulic calculations for extreme deep sea pressure and temperature fluid operating parameters.
Regularly update management....Read more...
Working within the Test Group, you will design, develop and assemble test equipment and ground support systems for rocket engines and propulsion systems. You will support testing activities, analyse results and work closely with engineering teams to ensure safe and reliable product performance.
Key Responsibilities
Interpret technical specifications and develop test equipment requirements.
Design and assemble test systems, Ground Support Equipment (GSE) and Electrical Ground Support Equipment (EGSE).
Develop test procedures, equipment setup instructions and maintenance plans.
Carry out testing, risk assessments and safety reviews.
Analyse test data and contribute to technical reports.
Support hot-fire testing and new product development.
Key Requirements
Practical, hands-on mechanical engineering or fitting experience.
Understanding of chemical rocket propulsion and fluid control systems.
Willingness to work in test facilities, cleanrooms and outdoor environments, with occasional extended hours or weekend work.
Degree in Mechanical, Aerospace, Aeronautical Engineering or Physics, or equivalent relevant experience.
Experience with rocket engines, spacecraft propulsion or test equipment design.
Basic electrical engineering knowledge.....Read more...
Subsea Tree Engineer required to work on the delivery of flow control equipment for offshore drilling rig systems as part of a subsea Engineering team
The ideal candidate will have flow control expertise and understand process technologies, you will drive projects execution, liaising and interfacing with both internal and external customers to provide end to end solutions from reservoir to surface. Including the assembly of valves, chokes, and pipes installed on the seafloor to control and monitor the flow of oil or gas from underwater wells.
Requirements
Experience dealing with Subsea Trees, Wellheads, and Drill and Production Systems.
SAP, PLM, MathCad, AutoCad or Inventor 3D CAD package fluency.
A Bachelor or MEng degree in Mechanical or Subsea Engineering.
Responsibilities
Design and Documentation of high level engineering designs, schematics, assembly drawings, specifications and testing procedures for underwater subsea trees.
Managing project deliverables
Perform mechanical and hydraulic calculations for extreme deep sea pressure and temperature fluid operating parameters.
Regularly update management....Read more...
Trainee Field Service Engineer
Croydon,
£35,000 - £45,000 Basic + Uncapped Overtime (OTE £70,000+) + Specialist Technical Training + Training courses & qualifications + Clear Career Progression + Company Vehicle + Door to door + Fuel Card + Pension + Holidays
Build your engineering career with specialist technical training, clear progression and uncapped overtime offering earnings of up to £70,000. Join an established company in the automatic door sector as a trainee field service engineer where you can develop in-demand technical skills, learn from experienced engineers and progress into a fully qualified Field Service Engineer role while maximising your earning potential.
This is an excellent opportunity for someone with a hands-on mechanical or electrical background who wants to develop specialist engineering skills. You will receive full training from experienced engineers, gaining practical experience working on automatic door systems while building your technical knowledge and earning potential. You will be joining a supportive team that invests in its engineers, offering ongoing development, increased responsibility and genuine opportunities to progress your career as your skills develop as a trainee field service engineer.
The Role Of The Trainee Field Service Engineer Will include:
Complete structured technical training on automatic door systems
Assist with the installation, servicing and maintenance of automatic doors
Learn to diagnose faults and carry out mechanical and electrical repairs
Work alongside experienced engineers on customer sites
Develop the skills to carry out independent service visits and breakdown repairs
Travel to customer sites across your designated area
Complete service reports and ensure all work meets safety standards
The Successful Field Service Engineer Will Have:
Hands-on electrical / mechanical experience / confident using hand tools
Full UK driving licence
Commutable to the Croydon / SE / SW areas
Keywords: Keywords: Trainee Field Service Engineer, Junior Field Service Engineer, Trainee Engineer, Automatic Door Engineer, Automatic Door Technician, Door Service Engineer, Door Installation Engineer, Industrial Door Engineer, Access Control Engineer, Mechanical Engineer, Electrical Engineer, Maintenance Engineer, Installation Engineer, Service Technician, Engineering Trainee, Field Technician, Electromechanical Engineer, Technical Service Engineer, Automatic Sliding Doors, Automatic Swing Doors, Revolving Doors, Access Automation, Fault Finding, Mechanical Repairs, Electrical Repairs, Engineering Training, Field Engineering, Mobile Engineer, Junior Maintenance Engineer, Trainee Maintenance Engineer, Garage Door Engineer, Roller Shutter Engineer, Gate Engineer, Lift Engineer, Lift Service Engineer, Security Systems Engineer, Building Services Engineer, Preventative Maintenance, Reactive Maintenance, Breakdown Engineer, Service and Installation Engineer, Technical Support Engineer, Engineering Apprenticeship, Engineering Jobs, Croydon, South Croydon, East Croydon, Thornton Heath, Purley, Coulsdon, Sutton, Mitcham, Morden, Wimbledon, Tooting, Balham, Streatham, Norbury, Brixton, Bromley, Beckenham, Penge, Crystal Palace, Lewisham, Catford, Orpington, Wallington, Carshalton, New Addington, Addiscombe, Selsdon, Shirley, South Norwood, Kingston upon Thames, Kingston, Surbiton, New Malden, Tolworth, Chessington, Worcester Park, Epsom, Ewell, Esher, Leatherhead, Walton-on-Thames, Weybridge, Richmond, Twickenham, Teddington, Hounslow, Wandsworth, Putney, Earlsfield, Clapham, Battersea, Balham, Peckham, Dulwich, Greenwich, Eltham, Sidcup, Bexleyheath, Dartford, Welling, Thamesmead, Woolwich, Abbey Wood, Erith, Swanley, Sevenoaks, Gravesend, South East London, South West London, South London, Surrey, Greater London.....Read more...
The Test Engineer will join a Systems Engineering team critical in space thruster engine development. You will work on a complex, multifaceted rocket engine system comprised of numerous newly developed and integrated components. This role has wide ranging technical input including structural, thermal, rocket propulsion, space electronics, software, testing and systems analysis.
In essence as a Senior Systems Engineer, you will coordinate and bring together the diverse sub components and sub assembles into a complete working space engine design.
My client supplies chemical propulsion rocket engines and thrusters serve to key spacecraft manufacturers for commercial, defence and scientific applications.
Requirements
Space systems experience ideally of large European space projects, system primes or ESA.
Technical leadership of large, multidisciplinary Electrical Harnessing Design, routing and schematic Mechanical and fluidic system Engineering projects.
System Analysis knowledge to apply to, fluidic systems, surge pressure and pressure drop. Performance, Structural, Thermal, Reliability, Radiation Assessment, Hazard or Safety Analysis.
Complex product development experience of thermal design and equipment selection using Failure Modes Effects and Criticality Analysis (FMECA).
Intelligent, logical approach to problem solving.
Degree, Masters or higher qualification in Engineering, Aerospace, Mechanical or Electrical Engineering.
You will own the overall engine system architecture, analysis and documentation including FMECAs, radiation, reliability, mechanical, thermal, fluidic, electromagnetic, Design, Development and Verification Plan, Design Justification Document, Software Requirements Specification, Engine Test Plan etc. Working closely with the Project Manager to help plan and organise resources.
Responsibilities
Support propulsion engine build, assembly and test development including route card build sequences and system assembly, integration, Manufacturing and Inspection Flow Charts.
Review, interpret, manage and own the spacecraft requirements then disseminate down to relevant engine subsystem or component teams.
Coordinate of top level Design, Verification and Compliance Matrix.
Internally digest key subsystem and component review documentation ensuring work is completed to required standards and all aspects of the engine system are correctly aligned.
Lead customer interactions and engine level reviews also manage supplier technical queries in conjunction with the appropriate resource.....Read more...
You will be part of an experienced workshop team, ensuring all vehicles are maintained, repaired and prepared to the highest standards for our customers. Working under the guidance and support of the Supervisor and Workshop Manager, you will play a key role in delivering quality workmanship, maintaining vehicle safety and ensuring the efficient running of the workshop.
- Carry out routine vehicle servicing, maintenance and general mechanical repairs.
- Undertake tyre fitting and replacement duties across a range of vehicles.
- Perform road tests, ramp inspections and vehicle assessments as required.
- Complete repairs using approved methods and manufacturer guidelines to restore vehicles to their original condition.
- Diagnose mechanical and electrical faults, carrying out further electrical diagnostics where necessary.
- Undertake warranty repairs in accordance with manufacturer standards and procedures.
- Plan and organise workloads effectively to meet deadlines while maintaining productivity and quality.
- Assist with general workshop duties as required to support the smooth running of the department.
- Ensure all relevant documentation is completed accurately and company procedures are followed at all times.
- Provide guidance and technical support to junior technicians, sharing knowledge and expertise when required.
- Maintain a safe, clean and organised working environment in line with health and safety requirements.
- Previous experience working as a Vehicle Technician, Mechanic or in a similar automotive role.
- City & Guilds or NVQ Level 2 or Level 3 qualification in Vehicle Maintenance and Repair, or an equivalent qualification (essential).
- A full, valid UK driving licence.
- Strong diagnostic and problem-solving skills, with the ability to identify and resolve mechanical and electrical faults.
- A genuine passion for the motor industry and pride in delivering high-quality workmanship.
- Excellent attention to detail and a commitment to maintaining the highest standards of safety, quality and customer satisfaction.
- The ability to work independently, use initiative and make informed technical decisions when required.
- Strong organisational and time-management skills, with the ability to prioritise tasks and meet deadlines.
- A positive, team-focused attitude, with a willingness to support, mentor and develop junior technicians.....Read more...
Junior Mechanical Plumber – FM Service Provider - Manufacturing Environment – Peterborough – Up to £35,000 + Package An exciting opportunity to join an established FM service provider based in Peterborough has arisen! CBW Staffing Solutions is currently recruiting a multi-skilled Maintenance Plumber based in a manufacturing environment. He or she will be required to carry out planned and reactive maintenance across this static site. The successful candidate will have a strong understanding of Facilities Maintenance and have a proven track record in building maintenance. In return, the company is offering a competitive salary of up to £35,000, overtime, and progression to become a fully-fledged mechanical engineer In return, my client is offering a very competitive package including:A basic salary of up to £35,000Plenty of overtime 25 days holiday + Bank HolidaysCompany Pension SchemeExcellent career progression opportunitiesHours of workMonday- Friday 08:00-17:00Key duties & ResponsibilitiesMonitor mechanical plantPlumbing work (Unblocking toilets, replacing taps, washers etc)Pumps, Motors, Seals, BearingsAir Conditioning - Air Handling Units / Fan Coil Unit (Filter changes, cleaning)Water Treatment (Temperature checks / Not dosing)Basic electrical duties (Lamp changes etc)General building fabricEscort specialist subcontractorsRequirementsMechanically or Plumbing qualified - City & Guilds Level 2Must be able to provide copies of your trade certificatesA proven track record in commercial building maintenanceMulti-skilledGood communication skillsClient Facing Please send your CV to Archie Reed of CBW Staffing Solutions to avoid missing out on the role !....Read more...
Ready to progress from supervising installations to managing complete projects? Nationwide projectsDura Mechanical is looking for an experienced Plumbing or Mechanical Supervisor who is ready for their first formal project management appointment.You'll work closely with Danny, our hands-on director, with regular discussions and site visits to help you understand our projects, clients and processes. As your confidence and knowledge of the business develop, you'll take greater ownership of project delivery, with support available when decisions need escalating.You do not need to have previously held the title of Project Manager. You should already be mainly off the tools, managing engineers, coordinating subcontractors, ordering materials and attending site meetings.Why join Dura Mechanical?We are a growing Gas engineering and Plumbing contractor with over 20 years of industry experience, delivering projects nationwide.We pride ourselves on organising jobs before the first day on site, giving engineers the information, materials and support they need. Our engineers feel heard, their decisions are respected, and they can take pride in the difference their contribution makes.This role offers a clear route towards independently managing projects and taking greater responsibility for client relationships and commercial performance.The roleA typical week will combine site visits with planning and coordination: reviewing progress, organising labour and materials, speaking with clients and site teams, resolving issues and preparing upcoming work.You will typically oversee 5-10 projects, with teams of up to 10 engineers per project, depending on the size and stage of each job. Your responsibilities will develop as you become familiar with the business.Key Responsibilities
Coordinating multiple live projects and sites.Managing directly employed engineers, subcontractors and other trades.Planning labour, materials, equipment and site requirements.Monitoring project programmes, deadlines and key milestones.Attending client, contractor and site progress meetings.Developing into the main day-to-day contact for clients.Ordering materials and monitoring stock availability.Organising RAMS for each project.Identifying delays or site problems early and taking action to resolve them.Producing clear project progress and status reports.Taking progress photographs and maintaining accurate project records.Completing quality inspections and project checklists.Supporting the preparation of O&M manuals and as-fitted drawings.Managing snagging, commissioning, handover and final completion.Ensuring compliance with health & safety, client and company standards.Holding regular one-to-one and performance conversations with team members.
What we are looking for
At least five years' practical Plumbing experience.Current or recent experience in a supervisory position, now mainly off the tools.Experience coordinating teams.Strong knowledge of commercial plumbing and mechanical installations, including the ability to resolve practical installation problems.Experience within healthcare and education environments.Experience preparing or reviewing risk assessments and method statements.Familiarity with health & safety legislation.Experience ordering materials and coordinating subcontractors.An understanding of project programmes, costs and variations.Strong client communication and leadership skills.A willingness to follow a development plan and act on constructive feedback.
Travel and benefits
Company car and fuel card.Company pension.Nationwide sites, with travel depending on the project and where you live.Some projects require overnight stays. Accommodation is paid for by Dura Mechanical, with a meal allowance.We aim to discuss overnight requirements in advance so you can plan.
Please apply here. If shortlised, we will contact you to arrange an interiew. ....Read more...
Field Service Engineer
Norwich
£34,000 - £36,000 Basic + Full OEM Training + Company Van + Fuel Card + Private Use + Tools + Job Satisfaction + Stability + Work-Life Balance + Holiday + Healthcare + Monday - Friday Role + Bonus
Solidify your career now as a Field Service Engineer where you'll receive full manufacturer training to become a specialist in the industry and have everyday job satisfaction. You'll benefit from a great work-life balance, with the opportunity to grow in a varied role with consistent on-the-job training and support. Join now and enjoy long-term stability where you will be looked after for the long term, accompanied by a fantastic package!
This company manufactures vehicle wash systems for commercial and industrial settings. Due to further growth, they are looking for an additional Field Service Engineer to join their highly skilled team. Join now and secure the opportunity to work with cutting-edge technology and be part of an exciting journey.
The Field Service Engineer Role Will Include:
Full OEM Training
Service, Repairs, Maintenance & Breakdowns of Vehicle Wash Systems
Field Service Role Covering the Norwich Area
The Successful Field Service Engineer Will Have:
ANY Mechanical Background Considered
Confident with electrics
Hand tool experience with electrical understanding
Happy to cover the Norwich area
Full driving licence
Please apply or send your CV for immediate consideration.
Keywords: Trainee Field Service Engineer, Field Service Engineer, Heavy Field Service Engineer, Commercial Vehicle Engineer, HGV Engineer, PSV Engineer, Bus Engineer, LCV Engineer, Plant Engineer, Mechanical Engineer, Electrical Engineer, Electro-Mechanical Engineer, Mechanical Fitter, Maintenance Engineer, Installation Engineer, Diesel Engineer, Fleet Engineer, Fault Finding, Service & Maintenance, Commercial Vehicles, Heavy Equipment, White Goods Engineer, Coffee Engineer, Electrician, Mechanic, Appliance Engineer, Gaming Engineer, Automatic Door Engineer, Norwich, Norfolk, Great Yarmouth, Wymondham, Dereham, Thetford, Attleborough, Aylsham, North Walsham, Cromer, Holt, Fakenham, Diss, Bungay, Lowestoft, Ipswich, Bury St Edmunds, King's Lynn, Norfolk, Suffolk, NR1, NR2, NR3, NR4, NR5, NR6, NR7, NR8, NR9, NR10, NR11, NR12, NR13, NR14, NR15, NR16, NR17, NR18, NR19, NR20, NR21, NR22, NR23, NR24, NR25, NR26, NR27, NR28, NR29, NR30, NR31, NR32, NR33, NR34, NR35....Read more...
Engineering Handyman / Multi-Skilled Engineer – part time£15–£18 per hour | 32 hours | Monday–Thursday | Friday OFF Taunton area | 7:30am–4:00pmA hands-on role where no two days are the same.We're looking for a practical Engineering Handyman / Multi-Skilled Engineer to join our team in beautiful Somerset surroundings.This is far from a typical maintenance role. You'll support a small successful cider production operation, but because the business has many different facets, your work will be incredibly varied.One day you could be repairing production machinery; the next you might be fixing agricultural equipment, welding, fabricating, carrying out carpentry, basic plumbing or helping with building and facilities maintenance on a large hospitality areaIf you're the person who enjoys fixing things, solving problems and getting stuck in, we'd like to hear from you.What you'll be doing
Mechanical maintenance and repairsCider production equipment maintenanceAgricultural and farming equipment repairsWelding, fabrication, metalwork and lathe workCarpentry and woodworkBasic plumbing and building repairsFacilities and general handyman workBasic electrical tasksGeneral fault finding and problem solving
About youWe're looking for someone with good mechanical experience and a practical, can-do attitude.You don't need to be an expert in everything, but experience in several of the following would be ideal:Mechanical maintenance | Welding | Fabrication | Metalwork | Lathe work | Carpentry | Plumbing | Building repairs | Basic electricsThis could suit a Multi-Skilled Engineer, Maintenance Engineer, Mechanical Engineer, Engineering Technician, Agricultural Engineer, Workshop Engineer, Engineering Handyman or experienced Maintenance Technician.Why join us?
£15–£18 per hour, depending on experience32 hours over 4 daysMonday–Thursday – Friday OFF7:30am–4:00pmBeautiful working surroundings28 days' holiday pro rata, including Bank HolidaysFree on-site parkingDiscounted staff mealsStaff discounts on retail, hospitality and mealsRoyal London pension scheme after 3 months, subject to eligibility
LocationBased in the Taunton area, the role could suit candidates commuting from Taunton, Wellington, Bridgwater, Ilminster, Chard, Yeovil, Crewkerne, Langport, Street, Glastonbury, Wiveliscombe, Martock and surrounding areas.If you want a hands-on Engineering Handyman role with genuine variety, beautiful surroundings and a three-day weekend every week, we'd love to hear from you. ....Read more...
Building Service Engineer - Electrical Bias - Central Belt - Salary up to £47,000 DOE We are looking for an experienced Mobile Multi-Skilled Building Services Engineer, ideally with an electrical bias, to support a large portfolio of sites across Scotland and the North of England. This is a varied mobile role, responsible for ensuring buildings, facilities and essential services remain safe, compliant and fully operational. You will carry out both planned preventative maintenance (PPM) and reactive maintenance, working across a range of building services systems. Key Responsibilities:Carrying out planned preventative maintenance (PPM) in accordance with schedules and client requirements.Responding to reactive maintenance requests and diagnosing faults efficiently.Undertaking electrical maintenance, fault finding and repairs across commercial buildings.Carrying out general building services and mechanical maintenance.Maintaining HVAC, heating, ventilation and associated building services.Undertaking minor installation and repair works.Carrying out lighting, emergency lighting and basic electrical works.Inspecting plant, equipment and building services to identify potential issues.Supporting compliance with relevant health & safety legislation and industry standards.Completing maintenance records, job sheets and reports accurately using the required systems.Liaising professionally with site contacts, colleagues, contractors and the client.Responding to occasional out-of-hours or emergency requirements where required.Maintaining a high standard of customer service while working within occupied commercial and testing environments.Person Specification:An electrical bias is preferred, alongside a good understanding of wider building services and mechanical systems.Experience working within Facilities Management, Building Services or a commercial environment.A strong electrical maintenance background.Experience carrying out PPM and reactive maintenance.Good fault-finding and diagnostic skills.A practical understanding of mechanical and building services systems.The ability to work independently and manage a varied workload.Good communication and customer service skills.A professional approach when working within client premises.A full UK driving licence.City & Guilds / NVQ Level 2 or 3 in Electrical Engineering or a related discipline.18th Edition Wiring Regulations.Inspection & Testing qualification.Experience with HVAC, mechanical systems, plumbing or general building maintenance.IPAF.PASMA.Asbestos Awareness.Salary & Benefits:Salary up to £47,000 DOEMobile role supporting a portfolio of established client sites.Monday–Friday working pattern.Stable, long-term facilities management contract.Variety of commercial environments including offices and testing centres.Company vehicle and tools/equipment provided.Ongoing training and development opportunities.Varied workload across multiple sites.Opportunity to work as part of an established Facilities Management team.No job description added....Read more...
