An established engineering organisation is looking for a Hardware Engineer to design and develop bespoke electrical and electronic hardware for complex test systems across aerospace, defence, space and other regulated industries.
You'll work across the full engineering lifecycle, from requirements capture and design through to manufacture, integration, testing and customer acceptance. Working alongside multidisciplinary engineering teams, you'll have the opportunity to tackle varied technical challenges and take ownership of your designs.
Key Responsibilities
- Design electrical and electronic hardware for bespoke automated and manual test systems.
- Translate customer requirements into practical hardware solutions and system architectures.
- Select and integrate instrumentation, power supplies, data acquisition equipment and communications hardware.
- Produce electrical schematics, wiring diagrams, bills of materials and technical documentation.
- Support hardware procurement, manufacture, integration, fault-finding and testing.
- Contribute to verification, validation, commissioning and customer acceptance.
- Collaborate with software, systems, mechanical and production engineering teams.
- Identify technical risks, component obsolescence and opportunities to improve performance and reliability.
Essential Skills and Experience
- A degree, HNC/HND or equivalent experience in Electrical Engineering, Electronic Engineering or a related discipline.
- Experience in electrical or electronic hardware design.
- Good understanding of analogue and digital electronics.
- Experience with component selection, hardware integration and technical documentation.
- Practical fault-finding and diagnostic skills.
- Understanding of manufacturing, assembly and testing processes.
- Full UK-valid driving licence and right to work in the UK.
Desirable Experience
- Aerospace, defence, space or other regulated industries.
- Automated test equipment, rack-mounted systems or electrical cabinets.
- PCB design, FPGA or microcontroller technologies.
- Instrumentation, data acquisition, power electronics or EMC.
- LabVIEW, TestStand, National Instruments hardware or electrical CAD tools.
- Interfaces such as Ethernet, RS-232/422/485, CAN, SPI or I²C.
- Verification and validation, safety standards or legacy equipment modernisation.
What\'s on Offer?
- Technically varied projects across advanced engineering sectors.
- Involvement throughout the full engineering lifecycle.
- Professional development and opportunities for career progression.
- Annual performance-related bonus.
- Pension with 4% employee and 8% employer contributions.
- Family private healthcare and health cash plan.
- 27 days' annual leave plus UK bank holidays.
- Cycle-to-work scheme.
Security: Applicants must be eligible to obtain and maintain the relevant UK security clearance. Some projects may have additional nationality or residency restrictions.
If you're a hands-on Hardware Engineer looking for varied technical challenges and the opportunity to take designs from concept through to commissioning, we'd like to hear from you.
TT....Read more...
Join an expanding team in Gloucestershire as an Assembly Fitter to keep up with their growing business. This is a fantastic opportunity to build a career in a thriving company.As an Assembly Fitter, you'll be part of a dynamic team working with cutting-edge tools and industry leaders in aircraft production. You'll have the chance to work on prestigious aircraft models like the A320 and A330 family, using advanced equipment such as zero gravity lifting and snap-on computerised toolboxes.You'll work on a regularly rotating shift pattern, covering dayshifts and nightshifts (which include a premium shift payment of 38.5% of your salary). Occasionally, there'll be options for working bridging shifts and weekend shifts too.Roles: Assembly Technician, Assembler, Assembly Operative, Production Operator, FitterWhat's in it for you?Competitive starting salary from £35,000, with the potential to increase after completing your training within 18-24 months.Exciting career development opportunities within their growing team.Flexible benefits package through our 'On Board Benefits' Programme, including options like cycle to work schemes, technology savings, retail discounts, healthcare access, sports clubs, and more.What do I need?You'll already have Fitting experience from a previous role, ideally in an Aerospace or Automotive environment. We're looking for someone with:A completed Apprenticeship in Mechanical Engineering.The ability to follow technical drawings, specs, procedures, and test instructions.A desire to learn and understand the basic principles of production flow lines, and takt times.Knowledge of COSH and flow line methodologies is ideal, but not essential for you to applyAnything else I need to know?As a valued member of our team, you'll be entitled to a range of company benefits, including:25 days holiday + UK Bank Holidays, plus the option to buy/sell annual leave.A generous pension scheme, up to 8% employer match.Our Shares and profit share bonus schemeAnd much more!Work Permissions:You must have the right to work in the United Kingdom. Visa sponsorship is not available at this time.....Read more...
Leisure / Pool Engineer Salary: £48,000 – £52,000 DOELocation: Canary Wharf / Greenwich (High-End Residential) About the Role We are recruiting a Leisure / Pool Engineer to support a high-end residential contract consisting of seven buildings, six of which are based in the Canary Wharf/Greenwich area and one in South West London. You will carry out PPM, reactive works, and specialist servicing on swimming pools, saunas, steam rooms, and associated plant equipment across premium residential developments. Benefits & Working HoursSalary: £48–52k (depending on experience)Hours: 07:30–17:00 Mon–Thurs, 07:30–16:00 Fridays£160 per month travel allowance24 days holiday (excluding bank holidays)Private health insuranceCompany vehicle (if applicable), tools, uniform & fuel cardOngoing training and developmentKey DutiesCarry out PPM on pool plant, filtration systems, circulation pumps, and heating equipmentPerform filter media/sand replacementsService and maintain UV disinfection panelsService and repair sauna and steam room equipmentRespond to in-hours callouts and complete reactive repairsInspect plant rooms and ensure compliance with safety and water hygiene standardsRecord all maintenance activities accuratelyRequirementsExperience as a Pool Engineer, Leisure Engineer or similar roleStrong knowledge of pool plant, filtration, and water treatment systemsExperience with filter media changes, UV systems, sauna/steam room servicingNVQ Level 2/3 in Mechanical, Electrical, Plumbing or equivalent (preferred)Pool Plant Operator Certificate (desirable)Strong fault-finding and diagnostic skillsFull UK driving licenceIf you are interested please reach out to Alex Denton of CBW Staffing Solutions to avoid missing out on this opportunity!....Read more...
Electrical Maintenance Engineer - Kings Cross - High-end Residential - Up to £45,000 Are you looking for a role within a unique environment? Are you electrically qualified with at least Level 2? If the answer is yes, then read on.... Exciting opportunity to work for an established FM Property company based near Kings Cross. CBW are currently recruiting for an Electrical Maintenance Engineer to be based in a high-end residential building located in Kings Cross. The successful candidate will be a qualified Electrical Maintenance Engineer with a proven track record in commercial/property building maintenance. He or she will be required to carry out Electrical planned and reactive maintenance across this static site. Working with the maintenance team on-site. He or she will be required to have an understanding/hands-on experience of the below. In return, the company is offering a competitive salary, further training, overtime and the chance to work at this very unique and interesting site. PackageUp to £45,000 per annum25 days holiday + BHCompany PensionKey Duties & ResponsibilitiesLighting (small installations, Fault-finding, Lamping, etc)Emergency lighting testsControl PanelsChanging BallastBMS System - Monitor (i.e. Hot & cold)Maintain and update Log booksPlumbing - Unblocking toiletsMonitor the mechanical plantPumps, Motors, Seals, BearingsCooling TowersAir Conditioning - Air Handling Units / Fan Coil Unit (Filter changes, cleaning)Water Treatment General building fabricEscort specialist subcontractorsHours of workMonday to Friday (40 hour week)08:00 am to 17:00 pm RequirementsElectrically qualified - City & Guilds Level 2(Required)17th/18th Edition (Required)Must be able to provide copies of your trade certificatesA proven track record in commercial building maintenanceMulti-skilledGood communication skillsClient FacingPlease send your CV to Archie Reed at CBW Staffing Solutions to avoid missing out on this opportunity! ....Read more...
Area Manager – Commercial Portfolio – Central London - up to 85K Would you like to work for one of the leading hard services providers in the UK? Have you got a proven track record within the commercial building services industry, ideally managing high profile, blue chip buildings? If so please read on... An excellent opportunity has arisen to join one of the leading companies in the facilities maintenance industry. The specialise in maintaining high end commercial buildings across London and the Home Counties and are looking for an experienced Area Manager to head up and manage a large commercial portfolio based in Central London. The client is one of the leading names on the property management circuit and the main purpose of the job will be to ensure that contractual and technical operations are maintained to a very high standard across this varied portfolio of buildings. Duties will include:Manage all financial budgets, P&L and technical issues.Manage agreed KPI and SLA’s.Responsible for managing the company’s H&S and environmental performance across the entire portfolio.Recruitment of any new staff required on sites.Responsible for the technical development of all staff, which will include annual appraisals.Management of client relationships on a daily basis.Management of all reports.Manage any additional business opportunities that will deliver client satisfaction and increase contract sales revenue.Applicants for this role must be able to demonstrate the following:Qualified in electrical or mechanical engineering discipline; C&G, HNC, HND or higher.Proven background in understanding of budgets and P&L. Strong engineering understanding.Previous experience of managing large maintenance teams.Experience of service delivery in the commercial maintenance sector. Ability to communicate both verbally and in writing with all levels of staff and clients.Ability to manage and prioritise a demanding and varying workload.Ability to deliver projects on time and on budget.The package for this role includes:Salary up to 85k.Performance related bonus 25 days holiday.HealthcarePension....Read more...
An established MEP contractor in North East London is looking for an Electrical Project Manager to take the reins on project delivery and play a central role in the company's next chapter. The mechanical and electrical contracting sector across London continues to see sustained demand, particularly within higher education and commercial environments where ageing building services infrastructure requires constant upgrade, maintenance, and replacement. For experienced electrical professionals who want more than just another PM role, this position offers something rare: the chance to step into a business where your work directly shapes operations, client relationships, and long-term growth. About the Company This respected MEP contracting firm has built a strong reputation delivering building services projects across London and the South East. Their client base is anchored in the higher education sector, with long-standing relationships across multiple London universities, alongside commercial and industrial work. The business is NICEIC-approved, holds a track record of quality delivery, and operates from offices in Woodford Green, North East London. As part of an ongoing leadership transition, the Directors are looking to strengthen the senior team with a capable project manager who can take genuine ownership of delivery and grow with the business over the coming years. The Role This Electrical Project Manager position in Woodford Green goes beyond standard project delivery. You will manage commercial and industrial electrical installation projects end to end, while also fulfilling the role of NICEIC Qualified Manager, responsible for liaising directly with the governing body during annual inspections and maintaining the company's accreditation standards. Day to day, the role is approximately 90% office-based with site visits for surveys, client meetings, and inspections as the projects demand. There is scope for occasional working from home. Critically, this is a position for a project manager who wants to step up and run with the opportunity, not someone looking for a quiet final posting before retirement. What the role involvesTaking full ownership of electrical installation projects from estimation and pre-construction through to delivery, commissioning, and handover across London and the South EastActing as the company's NICEIC Qualified Manager, ensuring all work meets the required standards and managing the annual inspection process with confidenceCollaborating with the Directors on MEP trades estimation, pre-construction planning, and contract review, identifying risks and suggesting modifications where necessaryManaging project teams and subcontractors through the full project lifecycle, from initial planning and scheduling through to practical completion and client sign-offDeveloping detailed project programmes for electrical and building services installation activities, coordinating with mechanical trades and wider project stakeholdersReviewing and approving materials, equipment, and technical submissions for electrical systems to ensure compliance with current regulations and client specificationsBuilding and maintaining strong client relationships, particularly within the higher education sector, to support repeat business and long-term partnershipsWhat you will needRecognised electrical qualifications such as City and Guilds, NVQ Level 3, BTEC Level 3, HNC, or equivalent, with a building services or electrical biasCurrent 18th Edition BS 7671 wiring regulations certification and the ability to act as NICEIC Qualified Manager, handling inspections and compliance requirementsProven experience managing electrical installation projects within commercial, industrial, or institutional environments, with education sector exposure being particularly valuableConfidence managing multiple subcontractors across small to medium-sized projects, with strong organisational and scheduling abilitiesCommercial awareness with experience contributing to estimation, contract review, and cost management on MEP projectsStrong digital skills and the ability to build lasting client relationships through clear communication and consistent deliveryThe ability to work with autonomy, make sound decisions under pressure, and take ownership of outcomes without requiring constant supervisionWork PermissionsYou must have the right to work in the United Kingdom. Visa sponsorship is not available at this time. What is on offer A competitive salary of £60,000 for a capable project manager ready to make an impact from day oneA genuine career progression pathway, with the potential to grow into a senior operational or general management role as part of the company's long-term leadership transitionAn office-based role in Woodford Green with flexibility for working from home and site visits across London and the South EastThe chance to work closely with the Directors and have real influence over how the business operates and growsA varied project portfolio spanning universities, commercial buildings, and institutional clients across the capitalA straightforward, no-nonsense working culture within a tight-knit team that values technical competence and getting the job done properlyWhy Building Services and MEP? The building services and MEP sector is one of the most secure and rewarding areas of UK construction. Regulatory tightening, net-zero targets, and the sheer volume of ageing electrical infrastructure across London's educational and commercial estate mean that qualified electrical professionals with project management capability are in sustained demand. For those working in Electrical Project Manager roles in London and the wider South East, salaries remain competitive and career mobility is strong. Professionals who combine genuine electrical knowledge with project leadership and client management skills will find themselves well positioned for years to come, particularly within specialist MEP contractors where their expertise is valued and their contribution is visible. This Electrical Project Manager opportunity in Woodford Green is presented by The OHUB UK, connecting ambitious professionals with career-defining roles across construction and building services.....Read more...
Construction Manager
Somerset£65,000 - £80,000 + Travel Allowance + Stay Away + Bonus + Pension + Holidays + Private Medical + Package + Career Progression + Immediate Start
Join a high-performing, fast-growing contractor delivering complex, high-value mission-critical projects across the UK and Europe. Operating across data centres, pharmaceuticals, and advanced logistics, this business is known for delivering at pace, maintaining exceptional quality, and developing its people into senior leadership.
This is a rare opportunity for a driven Construction Manager to take ownership of key elements of major projects while working towards stepping into Senior Construction Manager and Project Manager level roles.
You’ll be part of a dynamic, forward-thinking delivery team trusted by blue-chip clients, working on technically challenging builds where quality, programme, and coordination are critical.
Your Role as a Construction Manager Will Include:
Managing day-to-day site operations across specific packages or sections of a major project
Coordinating subcontractors and trades to ensure programme and quality targets are met
Driving health & safety, ensuring compliance across all site activities
Working closely with Project Managers, Engineers, and Design teams to ensure smooth delivery
Monitoring progress, resolving site issues, and maintaining programme momentum
Supporting delivery from early-stage construction through to commissioning and handover
The Successful Construction Manager Will Have:
Background in MEP, CSA, or Build within a main contractor environment
Experience delivering industrial, logistics, pharmaceutical, or data centre projects
Strong understanding of site operations, sequencing, and programme delivery
Ability to operate in fast-paced, high-pressure environments
Keywords: Construction Manager, Senior Construction Manager, Site Manager, Senior Site Manager, Package Manager, Section Manager, Build Manager, MEP Construction Manager, CSA Construction Manager, Data Centre, Data Center, Mission Critical, Pharmaceutical, Life Sciences, Industrial, Logistics, Advanced Manufacturing, High-Tech Construction, Cleanroom, MEP, Mechanical, Electrical, Building Services, CSA, Civils, Structural, Architectural, Main Contractor, Tier 1 Contractor, General Contractor, Site Management, Construction Delivery, Package Management, Subcontractor Management, Site Coordination, Programme Delivery, Construction Sequencing, Health & Safety, RAMS, Permits, Quality Control, Inspections, Compliance, Site Audits, CDM Regulations, Programme Management, Progress Tracking, Reporting, Problem Solving, Site Operations, Commissioning, Handover, Project Delivery, Somerset, Taunton, Bridgwater, Yeovil, Bath, Bristol, Weston-super-Mare, Frome, Wells, South West, UK Wide, Europe, EMEA, Site-Based, Travel Roles, Stay Away ....Read more...
An excellent opportunity has arisen for an experienced Engineering Project Manager to join a market-leading, international PLC-listed manufacturing organisation. The position will lead the delivery of multi-million-pound CAPEX projects, including new manufacturing facilities, civil and construction works, M&E, utilities, machinery installation, and production line commissioning.
What's in it for you as Engineering Project Manager?
£72,000 basic salary
Company car or car allowance
Company pension matched up to 10%
Private healthcare
Permanent position with a market-leading manufacturing organisation
Major ongoing investment across UK manufacturing operations
Training, development and long-term career opportunities
The Role of Engineering Project Manager As Engineering Project Manager, you will lead complex capital projects from initial scope and specification through to construction, installation, commissioning and handover.
Responsibilities of Engineering Project Manager will include:
Leading multi-million-pound engineering and CAPEX projects
Managing civil, construction and M&E work streams
Managing installation and commissioning of new machinery and production lines
Coordinating contractors, suppliers and engineering partners
Managing up to 50 contractors on site
Managing project programmes, budgets, resources and risks
Ensuring compliance with CDM Regulations and site safety requirements
Developing technical specifications and managing equipment suppliers
Reporting project progress, expenditure and key milestones to senior stakeholders
About You as Engineering Project Manager
We are looking for an experienced Project Manager with:
Experience delivering multi-million-pound engineering, manufacturing or construction projects
Strong knowledge of civil, construction and M&E project delivery
Experience within manufacturing, engineering, industrial or process environments
Strong contractor and supplier management experience
Good working knowledge of CDM Regulations
Experience of machinery installation and commissioning
Knowledge of Machinery Safety Directives, machinery safety standards and associated compliance would be a major advantage
Engineering qualification in Mechanical, Electrical, Civil, Structural, Process or Chemical Engineering would be advantageous
NEBOSH and/or PRINCE2 would also be advantageous
This role would suit an Engineering Project Manager, CAPEX Project Manager, Capital Projects Manager, Senior Project Engineer or Construction Project Manager with experience delivering complex projects within a manufacturing or industrial environment. £72,000 + Company Car/Car Allowance + Pension Matched up to 10% + Private Healthcare Please apply now for further information and a confidential discussion.....Read more...
A fantastic opportunity has arisen for a field based, Project Engineer with a market leading chemical manufacturer! They are looking for a Project Engineer to join their team on permanent, full-time basis. The key responsibilities are to oversee and manage the installation and commissioning of the company equipment across multiple UK locations; whilst providing technical support to colleagues within the team. This may include training new staff, managing installations from the initial scoping phase through to completion, and taking responsibility for project management across client sites.
Benefits:
Company Car
Annual Discretionary Bonus
Company Pension
Death In Service
Additional days accrued for Length of Service
Roles & Responsibilities of the Project Engineer:
Manage the installation and commissioning of company equipment, ensuring alignment with the company’s vision, purpose, and values.
Ensure strict adherence to Health & Safety protocols at all times, ensuring site-specific risk assessments and method statements are completed before commencing any on-site operations.
Identify any gaps in training or knowledge required for task completion and inform the Engineering Manager.
Prepare the specifications, scope and estimate for equipment installation, ensuring the availability of necessary materials. Coordinate all site staff to keep them informed of schedules and oversee it through to completion.
Oversee the installation of all company equipment, including all mechanical and electrical aspects (if qualifications permit).
Ensure that the completed installation can be adequately serviced, considering site conditions.
Qualifications required for the Project Engineer:
To excel in the role, the candidate must have experience within a similar installation or commissioning role. They must be able to demonstrate their project management skills and showcase their technical proficiency within the industry. As this is a role with national coverage, they must be able to travel UK wide with overnight stays where necessary. An understanding of industrial laundry equipment and chemical dosing systems would be desirable but is not essential. We would also welcome applications from candidates with transferable skills and experience who are looking to move into this type of environment.
If you believe you have the right skill set and experience for the role of Project Engineer, click on the link below to apply directly or contact Kate Wadsworth at E3 Recruitment.....Read more...
Maintenance Engineer
Chichester
Up to £54,000
12 hour shifts
Pension
Healthcare
Job description:
Maintenance Engineer
Our client a leading manufacturer is looking for a Maintenance Engineer with an excellent eye for detail and a passion for quality to join their team in Chichester. They offer a competitive salary and employment benefits as well as ample opportunities to grow and develop.
Roles and responsibilities as a Maintenance Engineer
Perform electrical and mechanical maintenance including planned and reactive maintenance activities on high speed production machinery
Record all relevant data, including any relevant refurbishment and overhauls that are required.
Support the operations teams by developing training materials
Work alongside other teams to identify solve problems.
Continually improve equipment maintenance strategies
Analyse PLC faults and diagnose external faults using various software programs
Requirements
Apprentice-trained electrical maintenance engineer, with a /NVQ3 in electrical engineering or equivalent
Ability to work a rotation pattern.
Minimum of 2 years' experience in manufacturing engineering, preferably in the FMCG sector.
Excellent knowledge of manufacturing engineering equipment, with experience working in production lines, warehouses and distribution centres
Understanding of PLC control system architecture and field control devices.
Strong MS Office skills and experience with CMMS systems.
Benefits
Up to £54,000
Pension
Healthcare
External & Internal training
Routes to progress within the business
Company overview/values/ DNA
As one of the leading food manufactures in the UK our client is looking for individuals who are as passionate as they are about producing quality products.
They provide an inclusive healthy environment where people can grow and develop in a diverse environment.
If you are suitable for the Electrical Maintenance Engineer, please apply below or give us a call on 01923 227 543
Alternatively, if you know anyone suitable for this role, we offer a referral scheme up to £400.....Read more...
Medical Devices Project Leader – Cambridge
We are seeking a dynamic and driven Project Leader to join our innovative medical devices team based in Cambridge. This is a unique opportunity to lead cutting-edge development projects that directly impact patient care and improve lives. You’ll be at the heart of a multidisciplinary environment, guiding cross-functional teams through the full product lifecycle—from concept to commercialisation.
The ideal candidate will bring proven experience in project leadership within the medical technology or life sciences sector, with a strong grasp of regulatory pathways and product development processes. You’ll be comfortable navigating complex technical challenges, managing timelines and budgets, and communicating effectively with stakeholders at all levels.
A strong academic foundation is essential. We’re looking for someone with a degree in a discipline that naturally leads into medical device design—mechanical engineering, electronics engineering, biomedical engineering, or a closely related field. Your technical background will allow you to engage meaningfully with design teams and contribute to the development of robust, compliant, and innovative solutions.
Mentorship is a key part of this role. We believe in nurturing talent and fostering growth, and you’ll be expected to support and guide junior members of staff, helping them develop both technically and professionally. Your ability to lead by example and share knowledge will be instrumental in building a high-performing, collaborative team culture.
What sets you apart is not just your professional expertise, but your mindset. We value individuals who approach problems with curiosity and creativity. If you have a technical hobby—whether it’s tinkering with electronics, building software, or engineering side projects—that demonstrates your passion for problem solving, we see that as a distinct advantage.
In return, you’ll be rewarded with an excellent starting salary, a comprehensive pension scheme, performance-related bonuses, and access to ongoing career development and skills training. This is a role where your growth is taken seriously, and your contributions are genuinely valued.
For more information, please contact Andrew Welsh, Director of Medical Devices, Biotech and Drug Discovery Recruitment at Newton Colmore, on +44 121 268 2240. Alternatively, submit your application and a member of our team will be in touch. Please note that without a CV, we can only provide limited information.
....Read more...
Medical Devices Project Leader – Warwick
We’re looking for a driven and technically credible Project Leader to take a leading role in our Warwick based medical devices team. This is a chance to shape genuinely impactful technologies guiding ambitious development programmes that move from early concept through to full commercial launch, improving patient outcomes along the way.
You’ll be central to a fast‑moving, multidisciplinary environment, bringing structure, clarity and momentum to complex engineering challenges. Your experience leading projects within medical technology will be essential, particularly where products are designed for high‑volume manufacture. A strong understanding of injection‑moulded plastic components is a must, and any exposure to regulatory pathways or full lifecycle development will help you hit the ground running.
We’re looking for someone with a solid academic foundation in a discipline that naturally feeds into medical device design — mechanical engineering, electronics engineering, biomedical engineering or something closely aligned. Your technical grounding will allow you to engage confidently with design teams, challenge thinking where needed, and help steer the creation of robust, compliant and innovative products.
You’ll also play a key role in developing others. Mentoring junior engineers, sharing knowledge and helping shape their technical and professional growth will be an important part of your remit. We value leaders who build trust, lead by example and create an environment where people feel supported to do their best work.
What really sets you apart is your mindset. We’re drawn to people who are naturally curious — the kind who enjoy solving problems for the sake of it. If you have a technical hobby or side project that shows your passion for engineering or technology, that’s a real advantage. It tells us you think creatively, explore ideas and enjoy understanding how things work.
In return, you’ll receive an excellent starting salary, a strong pension scheme, performance‑related bonuses and ongoing opportunities for professional development. This is a role where your progression is taken seriously and your contributions are recognised.
For more information, please contact Andrew Welsh, Director of Medical Devices, Biotech and Drug Discovery Recruitment at Newton Colmore, on +44 121 268 2240. Alternatively, submit your application and a member of our team will be in touch. Please note that without a CV, we can only provide limited information.....Read more...
Design Manager (MEP Bias) European Relocation Opportunities (Finland, Germany and Oslo) €80,000 – €110,000 + Travel Allowance + Bonus + Package + Clear Progression + Immediate Start A growing main contractor delivering high-value data centre, pharmaceutical, and advanced logistics projects across the UK and Europe is looking to appoint a Design Managers. This role is suited to someone from an MEP background who has progressed through a contractor environment and understands how design translates into delivery. You’ll be working on a major data centre project, fully site-based, taking ownership of design coordination from pre-construction through to handover. As the MEP Design Manager, you will be responsible for the design, coordination, and delivery of all MEP systems across major data centre projects (£40m–£250m). You’ll be expected to make a real impact — whether that’s supporting bids on flagship schemes, taking ownership of live project packages, or managing multiple smaller but equally complex scopes. The business is known for promoting internally and backing individuals who demonstrate consistency, progression, and the ability to deliver — with a clear route into Senior Design Manager and beyond.
The Role Will Include:
Managing the full MEP design process from coordination through to delivery
Leading design meetings with consultants, subcontractors, and internal teams
Reviewing drawings, technical submittals, and ensuring buildability on site
Driving BIM coordination and resolving clashes (Revit / Navisworks)
Ensuring design aligns with programme, cost, and construction sequencing
Supporting project delivery through to handover with as-built documentation
Skills & Experience Required:
Degree in Building Services, Electrical or Mechanical Engineering (or equivalent experience)
Background working for an MEP contractor or main contractor in a D&B environment
Proven experience managing technical design on live construction projects (data centres / pharma / industrial preferred)
Strong understanding of BIM, coordination, and construction-stage design (RIBA 3–5)
Clear career history showing progression, stability, and development
Comfortable working in a site-based, fast-paced environment
Keywords: Design Manager, MEP Design Manager, Technical Design Manager, BIM Manager, MEP Coordination, Design Coordination, Design Assurance, Revit, Navisworks, AutoCAD, BIM Level 2, Clash Detection, Technical Submittals, Shop Drawings, As-Built Documentation, Buildability, Construction Design, RIBA Stages 3-5, Design & Build, CDP, Main Contractor, MEP Contractor, Data Centre, Mission Critical, Pharma, Industrial, Europe, Norway, Nordics, Germany....Read more...
Production Engineer 6-Month Contract
Location: Horsham, West Sussex
Working arrangement: Onsite
Salary/Rate: Negotiable
Hours: 37.5 hours per week, with a lunchtime finish on Fridays
We are seeking a practical, proactive Production Engineer to join an engineering and manufacturing team on a six-month contract.
You will provide hands-on technical support to Operations, resolve production issues and improve manufacturing processes. Working between Engineering and Production, you will help turn designs into clear, efficient assembly processes while improving product quality, reducing costs and minimising downtime.
Key Responsibilities
- Provide engineering support to Production, resolving technical issues and shortages to minimise delays.
- Participate in design reviews, identifying opportunities to reduce cost and improve ease of manufacture and assembly.
- Develop assembly flow diagrams, build procedures, work instructions and check sheets for prototype and production builds.
- Support the implementation of engineering change requests.
- Develop and source tooling, jigs, fixtures and test equipment to support assembly.
- Investigate production and quality issues, identify root causes and implement effective corrective actions.
- Drive continuous-improvement initiatives to increase capacity, quality and reliability while reducing costs and equipment downtime.
- Support supplier improvement and corrective-action activity alongside Purchasing.
- Assist with production staff training and the development of mechanical and electrical workmanship standards.
- Maintain compliance with quality procedures, health and safety requirements and workshop housekeeping standards.
- Travel when required to support customers with technical or production issues.
Skills & Experience
- At least four years relevant manufacturing or engineering experience and/or a relevant qualification, such as BTEC or City & Guilds Level 2.
- Strong ability to read and interpret technical drawings.
- Good understanding of manufacturing and assembly processes.
- Experience using 3D CAD software.
- Strong computer skills and a structured approach to technical problem-solving.
- Clear written and verbal communication skills.
- Ability to work independently and collaboratively with Engineering, Production, Quality and Purchasing teams.
Desirable
- Experience with Design for Manufacture and Assembly (DFMA).
- Knowledge of Design Failure Mode and Effects Analysis (DFMEA).
- Experience supporting continuous-improvement initiatives.
- Staff supervision, training or mentoring experience.
- Experience using 3D printers.
About You
You will be organised, detail-focused and comfortable taking a hands-on approach in a busy manufacturing environment. You will bring sound technical judgement, adaptability and a collaborative attitude to resolving production challenges.
Security Requirements
Applicants must be able to obtain the required UK security clearance. Successful candidates will need to provide proof of identity, employment history, right to work in the UK and evidence of at least five years UK residency.
Apply with your CV to be considered for this six-month onsite opportunity in Horsham.....Read more...
Senior Water & Refrigeration Engineer – Marine
£60,000–£70,000 | UK-wide | International Travel
Are you an experienced refrigeration engineer looking to take your technical expertise into an exciting, specialist marine environment?
We’re seeking a Senior Chilled Water & Refrigeration Engineer to join a growing marine engineering operation, supporting complex cooling and refrigeration systems across vessels, shipyards and specialist marine installations throughout the UK and internationally.
This is a hands-on senior role offering the opportunity to tackle complex technical challenges, lead fault investigations and play a key role in commissioning, maintaining and improving critical marine systems.
The Role
Install, commission, maintain and repair marine chilled water plants and refrigeration systems.
Diagnose complex mechanical, electrical, refrigeration and control system faults.
Support equipment upgrades, plant replacements, refits and commissioning projects.
Act as a senior technical point of contact, providing guidance to engineers and customers.
Work closely with vessel crews, shipyards, project teams and equipment manufacturers.
Travel across the UK and internationally, with approximately 30% UK travel and 30% international travel.
About You
Extensive hands-on experience with industrial, commercial or marine refrigeration and chilled water systems.
Strong knowledge of chillers, compressors, heat exchangers, pumps and refrigeration circuits.
Confident diagnosing complex faults and working independently on technically demanding projects.
Relevant engineering qualification and a current F-Gas qualification.
Marine, naval or offshore experience would be advantageous, but strong transferable industrial refrigeration experience will also be considered.
Willingness to travel regularly throughout the UK and overseas.
What’s on Offer?
£60,000–£70,000 salary, depending on experience.
UK-wide location flexibility.
Exposure to specialist marine engineering projects in the UK and overseas.
A senior technical position with scope to influence engineering standards, system reliability and technical solutions.
Company pension, life insurance and cycle-to-work scheme.
Interested? If you’re a technically strong refrigeration or chilled water engineer looking for a varied role combining hands-on engineering, technical leadership and international travel, we’d love to hear from you.
Apply today to find out more.....Read more...
Data Centre Technical Manager - Client Direct - Central London - up to 80k + bonus and excellent benefits Are you from a data centre or critical engineering background? Would you like to work client side for a leading Data Centre company? If so, please read on.... One of the market leaders in the data centre world is currently looking to recruit a Data Centre Technical Services Manager to work at a high profile data centre based in Central London. The role will be working closely with the Head of Operations on site and will be responsible for overseeing and coordinating all engineering activities within the data centre, to ensure optimal performance, efficiency, and reliability of critical infrastructure systems. The main duties of the role are as follows:Lead and supervise a team of engineers and technicians, providing guidance, training, and support to ensure they perform their duties effectively.Plan, schedule, and prioritize maintenance, repairs, and upgrades of electrical, mechanical, and HVAC systems to minimize downtime and maintain uptime SLAs.Implement and enforce safety protocols and procedures to ensure compliance with regulatory standards and industry best practices.Collaborate with cross-functional teams including facilities management, IT operations, and security to address issues and optimize data centre operations.Manage vendor relationships and contracts for equipment procurement, maintenance services, and technical support.Maintain technical documentation within the data centre including SOP's/EOP's/MOP's, Electrical safety rules and risk assessments.Participate in capacity planning and expansion projects to support the growth of the data centre infrastructure.Act as a company HVAP.Be available as the 1st point of escalation for any incidents or issues.Applicants for the role must be able to meet the following criteria:Qualifications in Electrical Engineering, or a related field.Experience in data centre operations or a similar critical infrastructure environment.Proven track record of leading and managing technical teams.Strong understanding of data centre infrastructure, including power, cooling, security, and network systems.Excellent communication, interpersonal, and problem-solving skills.Ability to work effectively in a fast-paced and demanding environment.Leadership and team management skills.Excellent problem-solving and decision-making abilities.Effective communication and collaboration skills.Project management and organizational skills.Strong analytical and strategic thinking.....Read more...
Fire Suppression / Sprinkler Engineer - London (Foot Mobile) - Up to £50,000 PAYE or £220 a day CIS + Package About the Role We are recruiting a Fire Suppression / Sprinkler Engineer to support a high-end residential contract consisting of seven buildings, six of which are based in the Canary Wharf / Greenwich area and one is based in South West London. You will be responsible for PPM, reactive repairs, and specialist servicing on sprinkler systems, suppression equipment, and riser infrastructure across premium residential developments. Benefits & Working HoursSalary: £50,000 PAYE (depending on experience) or £220 a day CIS (depending on experience)Hours: 07:30–17:00 Mon–Thurs, 07:30–16:00 Fridays£160 per month travel allowance24 days holiday (excluding bank holidays)Private health insuranceCompany vehicle (if applicable), uniform, tools & fuel cardOpportunities for further training (Dry/Wet risers, specialist courses)Key DutiesCarry out PPM on fire suppression and sprinkler systemsPerform sprinkler flow switch servicing (flows & signals)Service and maintain commercial sprinkler set systemsConduct Dry and Wet riser servicingComplete all remedial works linked to sprinkler and riser systemsRespond to reactive callouts across the residential estateMaintain accurate records, service sheets, and compliance documentationEnsure all work aligns with fire safety regulations and standardsRequirementsExperience with sprinkler systems (installation or maintenance)Knowledge of domestic and commercial sprinkler setsDry/Wet riser maintenance or installation experience (training may be provided)Strong understanding of fire suppression systems and safety complianceRelevant engineering trade qualification (Mechanical, Fire Systems or similar)Strong fault-finding and problem-solving skillsFull UK driving licenceIf you are interested, please reach out to Alex Denton of CBW Staffing Solutions to avoid missing out on this opportunity !....Read more...
Shift Electrical Maintenance Engineer – Chancery Lane – £56,000 Package + HVAP Got your HVAP status and a strong electrical background? This landmark, multi-tenanted commercial building on Chancery Lane needs an engineer who's confident around HV/LV systems and wants to work somewhere that actually invests in its plant. CBW Staffing Solutions is recruiting on behalf of a leading FM provider for a Shift Electrical Maintenance Engineer to join this flagship contract on Chancery Lane, London. The role pays £48,000 plus a £5,000 shift allowance and £3,000 HVAP payment, working a continental shift pattern of 07:00–19:00, 4 on 4 off, covering both days and nights, on a permanent basis. The Role:Carrying out PPM and reactive maintenance across the electrical infrastructure — distribution boards, switchgear, UPS, generators, lighting and power circuitsFault-finding and rectification on electrical systems and building services equipmentOperating under LOTO procedures and taking ownership of HV safety and compliance where HVAP certifiedMonitoring building systems via the BMS and responding to alarms accordinglySupporting mechanical and HVAC systems as needed, alongside the core electrical workloadWorking within the Permit to Work system and supporting statutory complianceOverseeing specialist subcontractors on electrical worksManaging site logbooks, RAMS and maintenance recordsKeeping plant areas clean, secure and in excellent working orderProducing near-miss reports and contributing to site H&S complianceWhat You'll Bring:A recognised electrical qualification (C&G/NVQ Level 3 Electrical Installation or equivalent)HVAP status or a genuine willingness to work towards itA strong track record in commercial building services with an electrical focusConfidence with BMS and CAFM platforms (Maximo experience is a bonus)Ability to read electrical schematics and diagnose faults under pressureSharp communication skills and a proactive, safety-first mindsetWhat's On Offer:£48,000 base + £5,000 shift allowance + £3,000 HVAPContinental shift pattern – 4 on 4 off, days and nightsGenerous holiday entitlementOvertime opportunities availablePrivate healthcare optionsStakeholder pension schemeOngoing training, including HVAP courses and electrical CPDA long-term role on a flagship contract with genuine career progressionInterested? Send your CV to Dan Barber at CBW Staffing Solutions to apply. ....Read more...
Electrical Shift Maintenance Engineer – FM Service Provider – Chancery Lane, London – £56,000 Package + HVAP CBW Staffing Solutions is recruiting for a leading FM service provider seeking a Shift Electrical Maintenance Engineer to join a flagship, multi-tenanted commercial building on Chancery Lane, London. This is an excellent opportunity for an electrically qualified engineer with HVAP status or the ambition to achieve it, working on a site with a strong focus on plant reliability, safety and career development. Hours of Work:Continental shift pattern – 4 on, 4 off07:00–19:00, covering days and nightsKey Duties & Responsibilities:Carry out planned preventative and reactive maintenance across electrical systems, including distribution boards, switchgear, UPS, generators, lighting and power circuits.Diagnose faults and complete repairs across electrical and associated building services systems.Support HV safety and compliance, working in line with LOTO procedures where authorised.Monitor the BMS and respond to system alarms.Assist with mechanical and HVAC maintenance when required.Work within the Permit to Work system and support statutory compliance.Oversee specialist subcontractors carrying out electrical works.Maintain site logbooks, RAMS and accurate maintenance records.Keep plant rooms and equipment clean, safe and operational.Complete near-miss reports and maintain high health and safety standards.Package:£48,000 basic salary£5,000 shift allowance£3,000 HVAP paymentTotal package up to £56,000Generous holiday entitlementOvertime opportunitiesPrivate healthcare optionsStakeholder pension schemeOngoing training, HVAP courses and electrical CPDLong-term career progression on a flagship commercial contractRequirements:City & Guilds / NVQ Level 3 in Electrical Installation or equivalent.HVAP status, or a genuine willingness to work towards it.Strong experience in commercial building services maintenance.Good knowledge of BMS and CAFM systems; Maximo experience is advantageous.Ability to interpret electrical schematics and fault-find under pressure.A proactive, safety-conscious approach with strong communication skills.Interested? Please send your CV to Bailey White at CBW Staffing Solutions to apply for this opportunity.....Read more...
JOB DESCRIPTION
Solving challenges is the very foundation of who we are. After all, in the beginning, our founder, sea captain Robert Fergusson, didn't particularly care about paint. When he founded our company in 1921, he just wanted to keep his ship intact and stumbled upon a valuable solution. Today, that discovery is Rust-Oleum Corporation.
The same passion that drove the Captain to spend his next few years creating the world's first rust-preventative paint still drives us today. When we see a problem, we work diligently until we've perfected a solution, which has led to some of the most cutting edge, durable and innovative products in the industry. Our creative and talented team of over 2000 people across every corner of the world, help us remain the global leader in protective paints and coatings for both home and industry.
As our Production Associate, you will help Rust-Oleum deliver our products on time by operating, monitoring, and adjusting filling and packaging equipment to safely produce high-quality products while maintaining efficiency, performing basic maintenance, and ensuring accurate production records.
TASKS PROFILE:
Typical tasks for this position include (but are not limited to) the following:
Review job orders to determine details such as quantities to be filled, production times, stock specifications, BOM's, and SKU sequences.
Set and adjust speed, temperature, product flow, positions and tolerances of equipment.
Operate equipment at most efficient speed to ensure proper quality and output.
Monitor filling equipment to maintain specified operating levels and to detect malfunctions, making adjustments as necessary.
Stop machines when malfunctions occur, clear jams, and report unresolved malfunctions to a machine operator, lead, maintenance, and then management.
Change over or adjust equipment to improve performance and quality, using knobs, hand wheels, and/or hand tools.
Inspect and examine products for quality, packaging accuracy, conformance to specifications, and external defects.
Secure finished packaged items by gluing, stapling, wrapping, taping, or attaching fastener.
Load and unload materials, product, or packaging from machines, containers, conveyors, and conveyances.
Perform TPM (Total Productive Maintenance) per requirements. May require recording information such as weight, count, time, scrap and date packaged.
Stock and sort product for packaging or filling machine operation, and replenish packaging supplies, such as wrapping paper, plastic sheet, boxes, cartons, glue, ink, or labels to ensure all shifts requirements are met.
Responsibility for the equipment performance, efficient changeovers, operation, and preventative maintenance.
Ensure accurate counts of labels used and scrapped; and ensure appropriate inventory transactions are completed.
Perform other duties as assigned.
Responsibilities/Expectations:
Communicate with Supervisors, peers, or subordinates: provide information to supervisors and co-workers in written form or in person.
Maintain a good record of attendance and punctuality.
Learn all manual tasks performed within the department.
Perform tasks assigned using specific operating procedures and following department specific quality control processes and procedures.
Treat people with dignity and respect.
Conduct all business with integrity.
Adhere to Rust-Oleum Corporation Quality principles and participate in all departmental and company-wide Quality activities.
Follow all safety procedures and company policies.
QUALIFICATIONS:
Required Experience:
1-3 years of related experience.
High school diploma or GED.
Strong communication and interpersonal skills; ability to read, write, speak, and understand English.
Ability to read and understand various meters, scales and electronic read outs.
Ability to enter computer data.
Good mechanical aptitude.
Ability to solve problems in a team environment.
Ability to lift 50 pounds.
Knowledge:
English Language - Knowledge of the structure and content of the English language including the meaning and spelling of words, rules of composition, and grammar.
Mechanical - Knowledge of machines and tools, including their designs, uses, repair, and maintenance.
Skills
Operation Monitoring - Watching gauges, dials, or other indicators to make sure a machine is working properly.
Quality Control Analysis - Conducting tests and inspections of products, services, or processes to evaluate quality or performance.
Operation and Control - Controlling operations of equipment or systems.
Monitoring - Monitoring/Assessing performance of yourself, other individuals, or organizations to make improvements or take corrective action.
Critical Thinking - Using logic and reasoning to identify the strengths and weaknesses of alternative solutions, conclusions or approaches to problems.
Troubleshooting - Determining causes of operating errors and deciding what to do about it.
Coordination - Adjusting actions in relation to others' actions.
Equipment Maintenance - Performing routine maintenance on equipment and determining when and what kind of maintenance is needed.
Job Type: Full-time
Pay: $21/hour with a second shift premium of $0.75/hour, bonus eligible
Shift: Monday - Thursday 4:00PM - 2:30AM
Work Location: In person
From big benefits to small, we take care of our associates! After 30 days of employment, you will be eligible for a benefits package that includes medical, dental, life, disability and business travel insurance, flexible spending accounts, EAP, stock purchases and vacation/sick days/parental leave. We also offer a 401(k) plan after three months of employment. Associates are vested in the RPM Pension plan after completing five years of service. Rust-Oleum offers (9.5) paid holidays and (2) floating holidays per year. You are also eligible to earn two weeks of vacation on an annualized basis.
Rust-Oleum is an equal opportunity employer. Employment selection and related decisions are made without regard to sex, race, age, disability, religion, national origin, color, or any other protected class.Apply for this ad Online!....Read more...
JOB DESCRIPTION
Solving challenges is the very foundation of who we are. After all, in the beginning, our founder, sea captain Robert Fergusson, didn't particularly care about paint. When he founded our company in 1921, he just wanted to keep his ship intact and stumbled upon a valuable solution. Today, that discovery is Rust-Oleum Corporation.
The same passion that drove the Captain to spend his next few years creating the world's first rust-preventative paint still drives us today. When we see a problem, we work diligently until we've perfected a solution, which has led to some of the most cutting edge, durable and innovative products in the industry. Our creative and talented team of over 2000 people across every corner of the world, help us remain the global leader in protective paints and coatings for both home and industry.
As our Production / Label Room Associate, you will help Rust-Oleum deliver our products on time by operating, monitoring, and adjusting filling and packaging equipment to safely produce high-quality products while maintaining efficiency, performing basic maintenance, ensure accurate production records and label accuracy.
TASKS PROFILE:
Typical tasks for this position include (but are not limited to) the following:
Review job orders to determine details such as quantities to be filled, production times, stock specifications, BOM's, and SKU sequences.
Set and adjust speed, temperature, product flow, positions and tolerances of equipment.
Operate equipment at most efficient speed to ensure proper quality and output.
Monitor filling equipment to maintain specified operating levels and to detect malfunctions, making adjustments as necessary.
Stop machines when malfunctions occur, clear jams, and report unresolved malfunctions to a machine operator, lead, maintenance, and then management.
Change over or adjust equipment to improve performance and quality, using knobs, hand wheels, and/or hand tools.
Inspect and examine products for quality, packaging accuracy, conformance to specifications, and external defects.
Secure finished packaged items by gluing, stapling, wrapping, taping, or attaching fastener.
Load and unload materials, product, or packaging from machines, containers, conveyors, and conveyances.
Perform TPM (Total Productive Maintenance) per requirements. May require recording information such as weight, count, time, scrap and date packaged.
Stock and sort product for packaging or filling machine operation, and replenish packaging supplies, such as wrapping paper, plastic sheet, boxes, cartons, glue, ink, or labels to ensure all shifts requirements are met.
Responsibility for the equipment performance, efficient changeovers, operation, and preventative maintenance.
Ensure accurate counts of labels used and scrapped; and ensure appropriate inventory transactions are completed.
Perform other duties as assigned.
Responsibilities/Expectations:
Communicate with Supervisors, peers, or subordinates: provide information to supervisors and co-workers in written form or in person.
Maintain a good record of attendance and punctuality.
Learn all manual tasks performed within the department.
Perform tasks assigned using specific operating procedures and following department specific quality control processes and procedures.
Treat people with dignity and respect.
Conduct all business with integrity.
Adhere to Rust-Oleum Corporation Quality principles and participate in all departmental and company-wide Quality activities.
Follow all safety procedures and company policies.
QUALIFICATIONS:
Required Experience:
1-3 years of related experience.
High school diploma or GED.
Strong communication and interpersonal skills; ability to read, write, speak, and understand English.
Ability to read and understand various meters, scales and electronic read outs.
Ability to enter computer data.
Good mechanical aptitude.
Ability to solve problems in a team environment.
Ability to lift 50 pounds.
Knowledge:
English Language - Knowledge of the structure and content of the English language including the meaning and spelling of words, rules of composition, and grammar.
Mechanical - Knowledge of machines and tools, including their designs, uses, repair, and maintenance.
Skills
Operation Monitoring - Watching gauges, dials, or other indicators to make sure a machine is working properly.
Quality Control Analysis - Conducting tests and inspections of products, services, or processes to evaluate quality or performance.
Operation and Control - Controlling operations of equipment or systems.
Monitoring - Monitoring/Assessing performance of yourself, other individuals, or organizations to make improvements or take corrective action.
Critical Thinking - Using logic and reasoning to identify the strengths and weaknesses of alternative solutions, conclusions or approaches to problems.
Troubleshooting - Determining causes of operating errors and deciding what to do about it.
Coordination - Adjusting actions in relation to others' actions.
Equipment Maintenance - Performing routine maintenance on equipment and determining when and what kind of maintenance is needed.
Job Type: Full-time
Pay: $21/hour with a second shift premium of $0.75/hour, bonus eligible
Shift: Monday - Thursday 4:00PM - 2:30AM
Work Location: In person
From big benefits to small, we take care of our associates! After 30 days of employment, you will be eligible for a benefits package that includes medical, dental, life, disability and business travel insurance, flexible spending accounts, EAP, stock purchases and vacation/sick days/parental leave. We also offer a 401(k) plan after three months of employment. Associates are vested in the RPM Pension plan after completing five years of service. Rust-Oleum offers (9.5) paid holidays and (2) floating holidays per year. You are also eligible to earn two weeks of vacation on an annualized basis.
Rust-Oleum is an equal opportunity employer. Employment selection and related decisions are made without regard to sex, race, age, disability, religion, national origin, color, or any other protected class.Apply for this ad Online!....Read more...
A Field Service Engineer is sought to join a specialist fleet technology business in London (inside the M25), supporting the delivery of field service operations across customer sites by carrying out reactive repairs, planned preventative maintenance, audits, and installation work on vehicle-based technology and associated equipment.
The Field Service Engineer, London (inside the M25), will be expected to develop your understanding in the field, learning from senior engineers and the wider Field Service team in technical areas, service processes and best practice. This may include fault diagnostics, installation work, maintenance procedures, reporting systems, and safe working practices across customer sites and vehicle-based technology environments.
Responsibilities include:
Attend customer sites to complete reactive service calls and planned maintenance tasks as scheduled by the Customer Support Team.
Assist with installation and upgrade works in collaboration with the Projects Team when required.
Diagnose faults, identify solutions, and carry out repairs to restore equipment to full working order.
Accurately record all service, maintenance, and installation activities using company systems and reporting processes.
Ensure all work is completed safely, efficiently, and in line with company and customer standards.
Follow the company returns process by correctly handling, documenting, and returning faulty or removed parts.
Build and maintain positive working relationships with customers, acting as a professional representative of the business.
Support audits and inspections of installed equipment where required.
Attend customer meetings or site visits with management when needed.
Look after company equipment, tools, and vehicle, ensuring they are used responsibly and kept in good condition.
Key skills & experience:
Practical, hands-on technical experience (engineering, electrical, mechanical, IT hardware, telecommunications, or similar).
Strong fault-finding and problem-solving skills.
Ability to work independently and manage your own workload in the field.
Strong communication and customer service skills.
Full UK driving licence.
Comfortable working at height where required.
Willing and able to work permanent night shifts.
Positive attitude, reliability, and a proactive approach to learning.
How to apply:
Apply now for the Field Service Engineer role in London (inside the M25). Send your CV to adighton@redlinegroup.Com or call Adam on 01582878821....Read more...
Area Sales Manager – Industrial & Automotive Consumables
Location: Field Based – Cambridge & Milton Keynes
Salary: OTE £40K (basic £30K) plus quarterly Bonus + Company Car + Fuel Card + Mobile Phone + Laptop + 32 days hols + Pension + Fully Remote Role + No Weekends
Are you an ambitious Area Sales Manager / Business Development Manager or Field Sales Executive looking for your next challenge?
My client through expansion is looking for a motivated and commercially driven sales professional to manage and grow an established territory covering Cambridge, Milton Keynes and the surrounding areas.
This is a field-based role focused on developing new business, growing existing accounts and driving sales across a comprehensive range of industrial and automotive product & consumables.
You’ll build strong customer relationships, identify new opportunities and become a trusted partner by providing commercial support and product advice.
The Role:
We’re looking for someone who can:
Develop new business while managing and growing existing customer accounts.
Achieve territory sales targets through regular customer visits and relationship building.
Promote a wide range of industrial consumables and provide product recommendations.
Negotiate commercial agreements and deliver excellent customer service.
Manage your territory effectively using CRM and market insight.
Work collaboratively with internal teams and represent company at customer meetings and industry events.
About You:
You’ll ideally have:
A proven track record in field sales, business development or account management.
Experience selling industrial, engineering, manufacturing or automotive products/consumables.
Strong communication, negotiation and relationship-building skills.
Good commercial awareness with a results-driven approach.
Experience using CRM systems and a full UK driving licence.
A technical or mechanical background would be advantageous.
To express an interest in this Area Sales Manager role apply in confidence to:
Robert Cox, Senior Recruitment Consultant at Glen Callum Associates Ltd the Automotive Aftermarket Recruitment Specialist on 07398 204832 or email
JOB REF: 4368RC Area Sales Manager
Glen Callum Associates is committed to creating diverse and inclusive workplaces. We welcome applications from all qualified candidates regardless of gender, age, ethnicity, disability, sexual orientation, or background. We believe that a variety of perspectives makes a team stronger and a workplace better. If you need any adjustments during the recruitment process, please let us know – we’re here to support you.....Read more...
Multi Skilled Maintenance Engineer
Chichester
Up to £54,000
12 hour shifts
Pension
Healthcare
Job description:
Multi Skilled Maintenance Engineer
Our client a leading manufacturer is looking for a Maintenance Engineer with an excellent eye for detail and a passion for quality to join their team in Chichester. They offer a competitive salary and employment benefits as well as ample opportunities to grow and develop.
Roles and responsibilities as a Multi Skilled Maintenance Engineer
Perform electrical and mechanical maintenance including planned and reactive maintenance activities on high speed production machinery
Record all relevant data, including any relevant refurbishment and overhauls that are required.
Support the operations teams by developing training materials
Work alongside other teams to identify solve problems.
Continually improve equipment maintenance strategies
Analyse PLC faults and diagnose external faults using various software programs
Requirements
Apprentice-trained electrical maintenance engineer, with a /NVQ3 in electrical engineering or equivalent
Ability to work a rotation pattern.
Minimum of 2 years' experience in manufacturing engineering, preferably in the FMCG sector.
Excellent knowledge of manufacturing engineering equipment, with experience working in production lines, warehouses and distribution centres
Understanding of PLC control system architecture and field control devices.
Strong MS Office skills and experience with CMMS systems.
Benefits
Up to £54,000
Pension
Healthcare
External & Internal training
Routes to progress within the business
Company overview/values/ DNA
As one of the leading food manufactures in the UK our client is looking for individuals who are as passionate as they are about producing quality products.
They provide an inclusive healthy environment where people can grow and develop in a diverse environment.
If you are suitable for the Electrical Maintenance Engineer, please apply below or give us a call on 01923 227 543
Alternatively, if you know anyone suitable for this role, we offer a referral scheme up to £400.....Read more...
ð Floating MET Technician Northwest
Covering Multiple Bodyshops Across the Northwest
ð Northwest | ð° Up to £50,000 per year + Bonus + Car | ð MondayFriday | ð Permanent
Ref: 343178
Are you an experienced MET Technician looking for a new opportunity with excellent earning potential, no weekend working and the variety of working across multiple Bodyshops?
Were recruiting for a Floating MET Technician to join an established Bodyshop group, providing additional support across their sites throughout the Northwest.
ð§ A Genuine Roaming Role
This isnt a role based at just one Bodyshop.
As the groups Floating MET Technician, youll travel between multiple sites across the Northwest, providing valuable additional support where its needed most.
Youll be brought in to cover:
- Sickness and unexpected staff shortages
- Holidays and planned absences
- Busy periods and increased workloads
- Backlogs and additional repair demand
- General additional support across the groups Bodyshops
This is an ideal opportunity for a versatile and experienced MET Technician who enjoys variety, is comfortable working at different locations and wants to play a key role in keeping Bodyshop operations running efficiently.
The Role
We are looking for a skilled MET Technician to join our team. This hands-on role involves dismantling, repairing, and rebuilding vehicles to the highest standard, while supporting a smooth and efficient workflow across the bodyshop.
Key Responsibilities:
- Remove and refit parts to ensure body repairs meet a high-quality standard
- Dismantle and rebuild vehicles as instructed
- Identify and report unseen damage absent from the original estimate
- Carry out 4-wheel alignment, suspension work, GEO diagnostics, and other mechanical tasks
Requirements:
- Previous experience as an MET Technician / Strip Fitter
- ATA/NVQ qualifications advantageous but not essential
- Ideally trained in Hybrid/Electric vehicles
- Ideally ADAS trained
- Strong attention to detail and commitment to quality repairs
- Ability to work as part of a team in a fast-paced environment
ð° Whats On Offer?
- Up to £50,000 per year + bonus
- Company car + fuel allowance
- Individual bonus opportunities
- Monday to Friday no weekend working
- 25 days holiday + Bank Holidays
- Pension
- Permanent position with an established and busy Bodyshop group
- Varied work across multiple Northwest locations
- The opportunity to become a key floating resource supporting the group wherever demand is highest
ð Interested?
If you're an experienced MET Technician who enjoys variety and wants a role where no two weeks necessarily look the same, this could be an excellent opportunity.
Youll have the opportunity to work across multiple Bodyshops throughout the Northwest, helping cover sickness, holidays and busy periods, while benefiting from strong earning potential, a company car and Monday-to-Friday working.
Apply now with your CV or contact Richard on 07590 309374 / richard@holtautomotive.co.uk for a confidential chat and more information.
....Read more...
