Space thruster Test Technician required to support Hot Fire Space Propulsion Testing programmes.
The successful application will work with Test Engineers on site preparation, propellant handling, propellant sampling, pressure control systems checks, mechanical and steam vacuum systems, instrumentation calibrations, steam boiler operation also the collation and review of test data.
There will be extensive work on high pressure gas and fluidic systems including interpretation and understanding of Piping and Instrumentation Diagrams and the use of electrical and electronic measurement and testing equipment.
You will be working with satellite flight hardware, the preparation of space flight engines for test. Including instrumentation, installation on to the test stand, removal post hot fire test, and subsequent engine decontamination activities, etc. ....Read more...
Electronic Engineer required to work on new product development by supporting the hardware design of embedded electronics systems using microprocessors, power supplies, sensor interfacing, power systems control including relays, triacs, stepper motors and user interfaces.
Experience
8, 16 and 32 bit microcontrollers also familiarity with ST, Atmel or Microchip products would be advantageous.
Circuit design and PCB layout for EMC design consideration, ideally OrCAD.
Embedded C ideally Keil or IAR.
EMC compliance testing.
Interaction of electro mechanical products and mechanisms or experience of control and system design would be desirable
The ideal candidate will be a degree qualified Electronic Engineer with an interest in consumer electronics product design and 3 to 5 years industry experience.....Read more...
Firmware Developer required to join a dedicated firmware Research and Development team across the development life cycle for high value, complex wireless controlled rugged robots with advanced and diverse instrumentation.
Skills
Embedded C
Microcontroller programming 8 and 16 bit
Electronics Digital and Analogue
What you will be doing
Battery management and low power system design including motor drivers.
Safe failure mode by design, devices run at significant mechanical strain and harsh environments, including extreme temperatures causing unpredictable failures. If a tool fails it is essential that the failure is isolated and does not affect any other systems.
Designing and developing elegant solutions for real world problems using innovative design keeping the product suite best in class.....Read more...
Space thruster Test Technician required to support Hot Fire Space Propulsion Testing programmes.
The successful application will work with Test Engineers on site preparation, propellant handling, propellant sampling, pressure control systems checks, mechanical and steam vacuum systems, instrumentation calibrations, steam boiler operation also the collation and review of test data.
There will be extensive work on high pressure gas and fluidic systems including interpretation and understanding of Piping and Instrumentation Diagrams and the use of electrical and electronic measurement and testing equipment.
You will be working with satellite flight hardware, the preparation of space flight engines for test. Including instrumentation, installation on to the test stand, removal post hot fire test, and subsequent engine decontamination activities, etc. ....Read more...
Firmware Developer required to join a dedicated firmware Research and Development team across the development life cycle for high value, complex wireless controlled rugged robots with advanced and diverse instrumentation.
Skills
Embedded C
Microcontroller programming 8 and 16 bit
Electronics Digital and Analogue
What you will be doing
Battery management and low power system design including motor drivers.
Safe failure mode by design, devices run at significant mechanical strain and harsh environments, including extreme temperatures causing unpredictable failures. If a tool fails it is essential that the failure is isolated and does not affect any other systems.
Designing and developing elegant solutions for real world problems using innovative design keeping the product suite best in class.....Read more...
Electronic Engineer required to work on new product development by supporting the hardware design of embedded electronics systems using microprocessors, power supplies, sensor interfacing, power systems control including relays, triacs, stepper motors and user interfaces.
Experience
8, 16 and 32 bit microcontrollers also familiarity with ST, Atmel or Microchip products would be advantageous.
Circuit design and PCB layout for EMC design consideration, ideally OrCAD.
Embedded C ideally Keil or IAR.
EMC compliance testing.
Interaction of electro mechanical products and mechanisms or experience of control and system design would be desirable
The ideal candidate will be a degree qualified Electronic Engineer with an interest in consumer electronics product design and 3 to 5 years industry experience.....Read more...
Electronic and Mechanical Senior or Principal Test Engineer required to design, build and develop a range of automated test processes for optical sensors including their test, calibration and characterisation.
Key Skills
Optical sensing
Optoelectronics or fibre optics
Strong degree or PhD in a relevant field such as Physics, Optics, Engineering etc.
Significant experience in Optical test environment
Data acquisition and processing using National Instruments Labview Product and compliance testing
Project Management or Line Management would also be ideal
Role responsibilities
Product testing from component level to product from prototype through the manufacturing process and final product test.
Data analysis, interpretation and presentation of recommendations.
Design and development of pressure, temperature and acoustic test processes for optical systems.....Read more...
We are seeking a skilled technician to work closely with the Senior Test Engineer at aircraft test facilities. You will work extensively with high-pressure gas and fluid systems.
Key Responsibilities:
Proactively respond to any issues related to the engine or test site to ensure safety.
Assist in managing operations that involve hazardous materials.
Ensure that correct pressures are maintained in the feedlines during tests.
Assist lead Test Engineers with: site preparation and maintenance: conducting pressure and control system checks: instrument calibration and steam boiler operations.
Assisting with instrumentation, installation, and removal of flight engines before and after hot fire tests.
Required Skills and Competencies:
Hands-on mechanical fitter or engineering skills, ideally gained within an engineering-focused organization.
A proactive attitude toward safety and operational support.....Read more...
We are seeking a skilled technician to work closely with the Senior Test Engineer at aircraft test facilities. You will work extensively with high-pressure gas and fluid systems.
Key Responsibilities:
Proactively respond to any issues related to the engine or test site to ensure safety.
Assist in managing operations that involve hazardous materials.
Ensure that correct pressures are maintained in the feedlines during tests.
Assist lead Test Engineers with: site preparation and maintenance: conducting pressure and control system checks: instrument calibration and steam boiler operations.
Assisting with instrumentation, installation, and removal of flight engines before and after hot fire tests.
Required Skills and Competencies:
Hands-on mechanical fitter or engineering skills, ideally gained within an engineering-focused organization.
A proactive attitude toward safety and operational support.....Read more...
Project Lead – Site-Based Projects (Mechanical/Electrical) CBW Staffing Solutions is seeking an experienced and motivated Project Lead to manage and oversee the operational aspects of site-based projects. This includes everything from technical site surveys to installation, testing, and commissioning. You will play a crucial role in ensuring project performance and the successful achievement of key project deliverables. This multi-disciplinary role will involve working primarily on projects related to General Ventilation and LEV product groups, with opportunities to expand your expertise into Water Treatment and Environmental Monitoring. As a Project Lead, you will work with a variety of clients across industries such as construction, oil refineries, military sites, and more, managing both high and low-risk environments. Key Responsibilities:Lead, coordinate, and manage customer projects at various engagement levels.Effectively manage project scope, schedule, and resources across multiple projects.Monitor and ensure project performance, achievement of KPIs, and QCDP metrics.Facilitate project meetings and foster productive relationships with team members and stakeholders.Supervise and lead site installation teams.Identify project risks and develop strategies for mitigation.Support the sales process and assist with site surveys.Ensure compliance with health and safety regulations and customer requirements.Manage UK-wide travel, with a company van provided.Essential Requirements:3+ years of experience working on construction sites.2+ years of project management experience.CSCS/ECS card holder.Electrical and/or Mechanical NVQ Level 3 qualification.Strong knowledge of LEV/HVAC systems.Health & Safety certification (ISOH/SSSTS).Proven experience reviewing risk assessments.Strong understanding of occupational health hazards.Project Management qualifications (Prince2/APM) are a plus.Desirable Skills:Experience in Water Treatment (Lamella, Chemical dosing, water monitoring, etc.).Water Hygiene card.Benefits:23 days holiday + Bank Holidays (increasing with service).Pension scheme (auto-enrollment).Healthcare available after probation.Career development and progression opportunities.Generous bonus schemes.Free Friday lunch!....Read more...
THE ROLE
An opportunity for an ambitious and good Technical Project Manager with an M&E background is required for a large firm of construction consultants in central London.
This role is to work in the DATA CENTRE team.
You will have a Building Services Engineering background (Mechanical & Electrical Engineering).
This is a good opportunity to join a growing team within an international respected firm of consultants.
THE COMPANY
My client is a large firm of construction consultants providing Quantity Surveying / Cost Management, Employers Agent and Project Managers. for projects both in the UK and abroad.
They currently have offices across the UK and abroad.
They work on both new build and refurbishment projects across a range of sectors to include commercial offices, hotels, residential, arenas, sports stadia, data centres, airports, life sciences and more.
THE CANDIDATE
You will have an HNC, BSc or MSc qualified or similar engineering based Project Manager.
You must have a background as a Building Services Engineer (Mechanical & Electrical).
You may also be chartered.
You must have significant experience of project managing data centres from initial design stages through construction and handover.
You must have excellent client facing skills and have the ability to help to bring in new clients.
You will need to have good pre and post contract experience of project management from inception of a project through to completion and handover.
You should have good analytical skills.
You should have a stable work record.
You must have excellent English both written and spoken.
Salary is in the region of £80000 to £110000 or more according to experience plus benefits which includes professional fees, health insurance, pension, discretionary bonus and other benefits.
Please email a full c.v. or give me, Denise Neville a call for an informal and confidential discussion on 020 7613 5555 or 020 8368 0025 or mobile 07836 350309.....Read more...
This apprenticeship combines old-school engineering with cutting-edge technology.
You will help service British classics ranging from minor mechanical repair work to major overhauls
You will be taught about the history and development of vehicles, components and materials, and turn around the most complex restoration projects in a timely manner
It also includes Technical Drawing, welding, business studies and advanced diagnostics
Training:Qualification: The ‘HET Level 3 Apprenticeship’ is a nationally recognised qualification delivered by ‘HSA’ from its Mechanical Academy based at ‘Bicester Heritage’ in Oxfordshire. Delivered over 36 months on a block release basis, you will attend your academy on average every 5 weeks for a 5-day block of training running from Monday to Friday, the remaining 80% of the time you will be working with your employer. If required, your employer will cover the accommodation and travel costs.Training Outcome:On completion of the Programme, you will be qualified as a Heritage Engineering Technician. Employment with Great British Car Journey after completion of the apprenticeship is not guaranteed but very likely, subject to performance and a position being available.
The classic vehicle industry is thriving and the companies that HSA work with are world-class. Prospects for progression range from specialist technical roles to management positions and international work opportunities. Employer Description:Great British Car Journey opened in 2021 and is the UK’s latest living Automotive Museum. Tracking the evolution of British made vehicles, The museum has over 150 running vehicles, 57 of which are available for hire by the public. The Museum operates a fully functioning workshop restoring, preserving, and maintaining its expanding fleet of vehicles.
This a unique opportunity for an apprentice to begin an exciting, varied and interesting career in historic motoring.Working Hours :Monday to Friday, 8.00am to 5.00pm.Skills: Communication skills,Attention to detail,Organisation skills,Customer care skills,Problem solving skills,Presentation skills,Administrative skills,Number skills,Analytical skills,Logical,Team working,Creative,Initiative,Non judgemental,Patience,Physical fitness....Read more...
The Role: FEA Engineer (ANSYS)
Up to £50k DOE
This role will involve working primarily with ANSYS. The position will require the individual to
develop and assess structural concepts. The successful candidate will perform structural analysis using Ansys or other FEA tools to assess stress, deformation, fatigue, and thermal effects on components and systems. Collaborating with design teams to optimise product performance based on simulation results.
The Company
A company that is developing game changing product applications across many industries, to significantly impact global air quality and climate change for the better, opening a brand new site in Warwickshire, this is the right time to join a fantastic team!
Key Responsibilities
- Develop and assess structural concepts
- Perform structural analysis using Ansys or other FEA tools to assess stress, deformation, fatigue, and thermal effects on components and systems
- Collaborate with design teams to optimise product performance based on simulation results
- Prepare clear, concise technical reports and presentations to communicate analysis findings and recommendations to the team
- Support the development of new methodologies, custom scripts, and automation for simulation workflows to enhance efficiency
- Ensure all work adheres to industry standards, safety regulations, and company guidelines
The Right Person
The successful FEA Engineer will have a minimum of 3 years work experience in this kind of role, as well as possessing the following key skills:
- Experience with ANSYS mechanical nonlinear structural modelling packages is essential
- Extensive SolidWorks TM or another similar 3D CAD Program Experience
- Effective ANSYS FEA user
- Preferably with non-linear material modelling experience
- Preferably with Contact & Friction modelling experience
- Preferably with time-dependent modelling experience
- Good background in Classical Structural Mechanical Calculation Method
Interested? Here are your three options
1. This is the job for me, I meet all the requirements Call now and lets talk through your experience. Ask for Jon Webster on between 8.30am 5.30pm
2. I think Im right for this position, but Im not sure about some of the detail Click apply now so I can read your CV and come back to you.
3. Im interested but need to know more about what this job can offer me email jon@precisionrecruitment.co.uk with your CV and questions and I will reply with more detail.
Precision are committed to keeping our candidates informed and offer a guaranteed response within 7 days when applying through the application system.....Read more...
Install, maintain and repair water services e.g. heating pipework, radiators, boilers
Install, maintain and repair ductwork systems e.g. ducts, extract grilles
Diagnose and rectify faults on a range of heating & ventilating systems and equipment
Commission systems to ensure maximum efficiency against design specification
Training:You will split your time between working alongside a seasoned mentor and studying block release with our training provider. You will work towards your Level 3 in Building Services Engineering as well as gaining essential hands on experience on site. You will also have the opportunity to attend various additional courses throughout your tenure with us.Training Outcome:Upon completion you will be a fully qualified engineer. Depending on what you choose to specialise in you may go onto the tools as a heating and ventilation engineer, or work in the office as part of the design team or project management team. The majority of our apprentices stay on with us and have forged a succesful career.Employer Description:CF Roberts have been providing Electrical Services since the 1935 in Hereford. In 1997 CF Roberts moved its head office to its current location within Cheltenham, the larger site providing the facilities necessary for training and growth. In 2005 CF Roberts moved into Mechanical services, an area which we are applying substantial resources. The company is still a wholly owned family business following the original business ethics laid down by its founder Cyril Roberts.
CF Roberts is a medium sized electrical and mechanical contractor. Carrying out works from £100 to £7.0 million in value. The company operates in 3 areas. Major works, covering New Build and ‘protype’ M&E projects up to 5m in value. Retail & Leisure, specialising in fit-out and refurbishment specialising in framework/multiple site agreements up to £3m in value, plus a 3rd sector concentrating on Minor works, roll out programmes and FM.Working Hours :Predominantly Monday to Friday, with a guaranteed minimum of 37.5 hours per week, however working & staying away from home and working evenings & weekends are a key part of the job.Skills: Communication skills,Attention to detail,Organisation skills,Problem solving skills,Team working,Initiative,Physical fitness....Read more...
Pipe Fitter
Hitchin
£45,000 - £50,000 + Progression + Industry Leader + No Weekends + Work Life Balance + Car Allowance + Training Provided + Low Staff Turnover + Pension + Immediate Start
Are you an experienced pipe fitter looking for a stable, long-term career in a friendly and supportive work environment? Look no further! Join a leading company that specializes in industrial extraction systems for the waste industry. As this company expands their operations into Europe, they are looking for a skilled Pipe Fitter with a multi-skilled background to join their team.
With a focus on high-quality and reliable solutions for industrial clients, this company manufactures kits for site installations and provides fully converted containers for extraction systems. With their business expanding into Europe, there will be plenty of opportunities for you to advance into management roles. If you are a driven and skilled pipe fitter with a multi-skilled background, then this is the role for you!
Your Role As a Pipe Fitter Will Include:
Pipe and duct fitting for industrial extraction systems
Maneuvering heavy bits of kit around.
Providing support for site installs when required.
The Successful Pipe Fitter Will Have:
Pipe fitting and duct fitting experience
Mechanical/electrical background
Clean driving license (happy to commute around Hertfordshire)
If you are interested in this position please contact Sai on 07537153941
Key words: Pipe fitter, duct fitter, plastic pipe fitter, pipe fitting, electrical, mechanical, industrial extraction systems, waste industry, multi-skilled, manufacturing, site installations, Progression, Work life balance, Car allowance, Training, Progression, Hitchin, North Hertfordshire, Letchworth Garden City, Luton, Ickleford, Offley, Stevenage, Welwyn, Baldock ....Read more...
As our Apprentice Mechanical Fitter, you will work to develop competence in:
Attending scheduled maintenance activities to identify and fix potential problems before they become catastrophic
Carrying out Regular checks for damage or wear, and to ensure that equipment is working properly
Cleaning and lubricating assets to ensure they are fit for purpose and working within guidelines
Attending breakdowns, Identifying the cause of a problem using diagnostic tools as well as fixing broken parts or replacing defective components
There will also be the role of ensuring mechanical parts are in a safe working condition this will include communicating any issues to other Technical Experts
Utilising I.T. equipment to provide updates on job roles
Following health and safety practices and attending relevant training
Training:Maintenance and Operations Engineering Technician Level 4 Apprenticeship Standard:
The Apprentice will train at Appris college on day release basis for the first two years of the apprenticeship
The remainder of the apprenticeship will be building competence and a portoflio of evidence
Training Outcome:
The role comes with a progression plan linked to pay increases there are also opporutnities to expand on technical specialisms and leadership skills across the organisation
Employer Description:Our Funded Learning team work closely with teams across the business to offer as many quality opportunities as possible to support the building of knowledge, skills and behaviours for our learners to use in the workplace.
Each apprentice will benefit from a support network including former apprentices who have been on similar journeys and a central support team who will make sure your training provider delivers a quality programme. Complemented by employability workshops, experiential team building sessions and social activities, our apprentice remain strong as a cohort throughout their career at Yorkshire Water.Working Hours :Monday to Friday, an example day could be 8.00am to 4.00pm. upon completion of the apprenticeship the role will require unsociable working.Skills: Communication skills,IT skills,Problem solving skills,Team working,Physical fitness,Driving Licence....Read more...
Night Shift Engineer (4 on 4 off Shift) - Client Direct - Commercial Estate – Canary Wharf, East London - £57,000Are you electrically qualified?Are you looking for a night shift position?Are you happy to work in the Canary Wharf?If yes, then read on...…Exciting opportunity to work for a Direct Client situated in the Canary Wharf, East London. CBW are currently recruiting for a Night Shift Maintenance Engineer to be based in a retail estate located in Canary Wharf, East London. The successful candidate will be electrically biased (C&G, 18th Edition) with a proven track record in commercial building maintenance, ideally within a critical site (i.e. Bank, Data centre, Blue chip office etc). Working with the maintenance team on site, He or she will be required to carry out electrical and mechanical planned and reactive maintenance to the following. In return the company is offering a competitive salary of £57,000, further training, overtime and career progression. DutiesElectrical - Lighting (Small installation, Fault-finding, Lamping, Changing ballast, Control panel, Power distribution)GeneratorsPumps, Motors, Seals, BearingsEmergency lightingAir Conditioning - Air Handling Units / Fan Coil Unit (Filter changes, cleaning)Chillers - Re-setBMS System - Monitor (i.e. Hot & Colds)UPS Systems - Monitor / Take readingsHours of work4 nights on 4 Nights off19:00pm - 07:00am Package£57,000 Salary Including Shift allowance25.5 Shifts Holiday12.5% Pension contribution from employerPrivate healthcare and dentalCycle to work schemeLife assuranceSubsidised gym membershipOvertime AvailableCareer ProgressionTraining (Internal and External Courses)RequirementsElectrically QualifiedCity & Guilds - Level 3City & Guilds - 18th EditionA proven track record in Building Maintenance workingGood Communication Skills.Multi-Skilled - Mechanical / ElectricalKnowledge of UPS / Generators / Power DistributionTraceable work HistoryPlease send your CV to Fin Havering of CBW Staffing Solutions for more Information! ....Read more...
Site Installer – LEV & Water Treatment Systems (Portsmouth Naval Base) CBW Staffing Solutions is currently seeking a Site Installer to join a project based at the Portsmouth Naval Base. This role is integral in supporting the technical engineering installations, focusing on Local Exhaust Ventilation (LEV) and Water Treatment systems. You will ensure that site projects are completed to the highest quality standards, within budget, and on time. The role involves overseeing contract staff to ensure that technical requirements are met while carrying out LEV installations on naval platforms and throughout the base. You may also be required to assist with other ad hoc projects and installations as needed. Key Responsibilities:Assist in carrying out technical surveys for LEV and Water Treatment systems.Conduct LEV testing and compile reports.Perform fault-finding activities on equipment breakdowns.Complete technical LEV installations as per project specifications.Ensure completion of delivery/collection documentation.Assist in writing and reviewing RAMS (Risk Assessment Method Statements).Manage on-site logistics, including transport bookings, crane lifting, and power supply arrangements.Support general stores and workshop activities.Promote a strong health & safety culture across the team.Maintain effective communication between all parties involved.Essential Requirements:Level 2 English & Maths.Full Driving License.Good electrical and mechanical knowledge.Knowledge of LEV systems.Experience working in construction or high-risk environments.Health & Safety certification (e.g., IOSH Managing Safely).CSCS/CCNSG Card.BPSS security clearance.Desirable Qualifications:NVQ Level 2 (minimum) in Electrical/Mechanical Engineering.BOHS P600 certification.Experience working on naval platforms.Benefits:23 days holiday + Bank Holidays (increasing with service).Pension scheme (auto-enrollment).Healthcare available after probation.Career development and progression opportunities.Employee Assistance Programme (EAP).Free Friday lunch.Generous bonus schemes.....Read more...
Electrical Maintenance Engineer Huddersfield £38,000 - £40,000 Basic + Training + Job satisfaction + Longevity + Stability + Holidays + Pension + Call out + No weekends + Low staff retention Secure a job for life as an electrical maintenance engineer in a recession proof industry that will offer you a career for life providing you stability within a recession proof industry. Enjoy a Monday to Friday role with no weekends in a family feel environment. This company will support you and appreciate the skills and experience you’ll bring. This company has a worldwide presence and is looking to continue to solidify their status in their unique industry. They are looking for an electrical maintnenance engineer to join a highly skilled and close knit team where you will play a key role in helping the company improve their production capabilities. The role as an electrical maintenace engineer will include: * Electrically biased role - Monday to Friday Day Shift * Carry out planned / reactive maintenance, installations and breakdowns * Site based role in Huddersfield The successful electrical maintenance engineer will have: * An electrical qualification * An electrical background * Ability to commute to Huddersfield Apply now to Rebecka at Future Engineering Recruitment Keywords: Electrical engineer, mechanical engineer electrical maintenance engineer, maintenance engineer, electrical technician, electrical, electricians mate, electrical qualified , city and guilds , NVQ 18th Edition, maintenance technician, maintenance, electrical engineer, electrical maintenance, mechanical maintenance, hydraulics, electrics, electrical, single phase, three phase, fault finding , fault finding engineer, Huddersfield, Meltham,Bradford,Wakefield,Leeds, Halifax, meltham, yorkshire, west yorkshire This vacancy is being advertised by Future Engineering Recruitment Ltd. The services of Future Engineering Recruitment Ltd are that of an Employment Agency.
Please visit our website to view other positions we are currently handling.
Future Engineering Recruitment Ltd can only accept applications from candidates who have a valid legal permit or right to work in the United Kingdom. Potential candidates who do not have this right or permit, or are pending an application to obtain this right or permit should not apply as your details will not be processed.
We will endeavour to respond to all applicants however due to the sheer volume of response, we can only guarantee that candidates who have been shortlisted will be contacted.....Read more...
As our Apprentice Mechanical Fitter, you will work to develop competence in:
Attending scheduled maintenance activities to identify and fix potential problems before they become catastrophic
Carrying out Regular checks for damage or wear, and to ensure that equipment is working properly
Cleaning and lubricating assets to ensure they are fit for purpose and working within guidelines
Attending breakdowns, Identifying the cause of a problem using diagnostic tools as well as fixing broken parts or replacing defective components
There will also be the role of ensuring mechanical parts are in a safe working condition this will include communicating any issues to other Technical Experts
Utilising I.T. equipment to provide updates on job roles
Following health and safety practices and attending relevant training
Training:Maintenance and Operations Engineering Technician Level 3.
The apprenticeship training is delivered at Appris on a day release basis. There is also site work consisting of building a portfolio of evidence of your competence in the specialism. Training Outcome:The role comes with a progression plan which links to pay increases. This can also include expanding on technical expertise and/or leadership skills. Employer Description:Our Funded Learning team work closely with teams across the business to offer as many quality opportunities as possible to support the building of knowledge, skills and behaviours for our learners to use in the workplace.
Each apprentice will benefit from a support network including former apprentices who have been on similar journeys and a central support team who will make sure your training provider delivers a quality programme. Complemented by employability workshops, experiential team building sessions and social activities, our apprentice remain strong as a cohort throughout their career at Yorkshire Water.Working Hours :Monday to Friday 37 hours per week, this could be 8am to 4pm. Upon completion of the apprenticeship the role will require some unsociable working hours.Skills: Communication skills,IT skills,Problem solving skills,Team working,Physical fitness,Driving licence....Read more...
The Company:
A forward-thinking company dedicated to shaping the future.
Committed to sustainable practices, particularly in forest management.
Innovators in timber utilisation, ensuring efficiency while replenishing natural resources.
Operates state-of-the-art sawmills and CHP (Combined Heat and Power) plants, promoting energy efficiency and self-sufficiency.
The company has over 370 professionals that are specialists in timber products and wood pellet production, with expertise spanning delivery and supply chains.
The company prioritise growth for the future while maintaining their status as a leading supplier of wood products in Britain and Ireland.
At the forefront of their industry and a leadership in sustainable forestry and timber production.
The Role of the Service Engineer
Undertake/manage planned preventative and corrective maintenance
Respond quickly and efficiently to breakdowns
Routine servicing and inspection of mechanical plant, electrical equipment and instrumentation within the portfolio
Fault finding and trouble shooting
Host & induct specialist sub-contractors, and ensure they conform to site requirements
Ensure service delivery is supplied to the client under contract KPIs
General house-keeping duties as and when necessary
Stock Management
Benefits of the Service Engineer
£40k-£44k salary
Overtime and weekend work available
Company Van
Pension, Tools, laptop, mobile
20 days Holiday + bank holidays.
The Ideal Person for the Filed Service Engineer
Skilled Engineer with a HND or above, or qualified time served apprenticeship in a mechanical/ electrical engineering.
Minimum of 2 years relevant experience in an industrial environment
Experience in delivering field service & support
Experience in troubleshooting customer problems and acting as a point of contact for customer queries
As a customer facing member of the team, have the ability to develop constructive relationships with customers/Installers/own team.
Excellent communication skills - both written and verbal
Full UK driving licence
Ability to work as part of a team
Expected to travel and stay away from home on occasions
If you think the role of Filed Service Engineer is for you, apply now!
Consultant: Darren Wrigley
Email: darrenw@otrsales.co.uk
Tel no. 0208 397 4114
Candidates must be eligible to work and live in the UK.
About On Target
At On Target, we specialise in sales, technical and commercial jobs in the Engineering, Construction, Building Services, Medical & Scientific, and Commercial & Industrial Solutions sectors, enabling our consultants to become experts in their market sector. We place all levels of personnel, up to Director across the UK and internationally.....Read more...
Commissioning EngineerSheffield£40,000- £45,000 + Overtime + Product Training + Industry Leader + Stability + Immediate Start
Are you looking for a Commissioning Engineer role for an industry leading organisation that prides itself on its reputation? Due to a period of growth, this organisation are on the lookout for an experienced engineer ready to make an instant positive impact. The right candidate with benefit from a fantastic package with the security of working for a stable and growing company.
The organisation specialise in the design and manufacturing of power generation and storage solutions. The Commissioning Engineer position offers the opportunity for an experienced engineer to showcase their skills to a company that values its employees. Be a part of a company that will value and reward your hard work with a fantastic working environment and competitive package.Your Role As a Commissioning Engineer Will Include:* Commissioning Engineer - national cover * Installation and commissioning of power generation and storage solutions * Travel as per business requirements * Regular stay-awayAs a Commissioning Engineer You Will Need To Have:* Experience as a Commissioning Engineer * Experience within Power Generation * Flexibility with travel * Clean UK driving license.
If this sounds like you apply or call George Kuderovitch on 07458163036 for IMMEDIATE CONSIDERATION.
Keywords: commissioning engineer, field service engineer, service engineer, field service, engineer, commissioning, power supply, power generation, mechanical, mechanical electrical, diesel generators, diesel, Sheffield, Manchester, Nottingham, Leicester, Loughborough, Derby, Lincoln, Scunthorpe.This vacancy is being advertised by Future Engineering Recruitment Ltd. The services of Future Engineering Recruitment Ltd are that of an Employment Agency.
Future Engineering Recruitment Ltd can only accept applications from candidates who have a valid legal permit or right to work in the United Kingdom. Potential candidates who do not have this right or permit, or are pending an application to obtain this right or permit should not apply as your details will not be processed.
We will endeavour to respond to all applicants however due to the sheer volume of response, we can only guarantee that candidates who have been shortlisted will be contacted....Read more...
Semi Skilled Joiner Permanent position for a semi skilled joiner to work Monday to Friday (Half day Friday), no weekend working, no shifts, Starting salary £25,700Overtime paid at x1.5, market-leading growing company with an order book that is full for the next two years. Opportunity to work for a company that will invest in training develop your skills further.Location of the semi skilled joiner position: TamworthThe semi skilled joiner role is needed to work on bespoke projects for a company that builds vehicle bodies for light and commercial vehicles.They are a leading name in their sector that have a reputation for quality and innovation. The company provides further training and offers the opportunity to work within a clean, modern, friendly working environment.This position would suit somebody confident using hand tools, power tools, likes working in a team in a modern clean organised environment.A good attitude is key for our semi skilled joiner, and if you are someone that would like to join a growing manufacturing business that has a strong order book and has big plans for the futureIf you have worked as a Vehicle Builder, Coachbuilder, Vehicle Mechanic, Vehicle Technician, Maintenance Engineer, Mechanical assembler, Mechanical Fitter, Joiner, Manufacturing Technician, etc we would be very keen to speak to youWhat's in return for the Semi Skilled Joiner role:
Basic salary: Circa £25 – £27K a year, with potential further rises after passing probation
39 hours basic with OT paid at x1.5
Clean modern working conditions
Further training is provided to upskill further
Full-time Permanent position
Duties of the position:
Assembling bought and finished components onto vehicles. i.e lights, racking, grab rails, steps etc
Some light electrical work (12v)
Utilizing hand and air tools in manufacturing operations
Follow SOPs
Measuring and marking out, ideally using tapes, micrometres and verniers desirable
Alternatively, if you would like a private chat about the position before applying please contact Grace Hudson-Morgan at E3 Recruitment.....Read more...
Junior Maintenance Engineer (Electrical or Mechanical) - FM Service Provider - Commercial Building - City of London- £35,000 - £40,000Are you looking for a way into maintenance?Are you looking for a role in Central London?Are you electrically or mechanically qualified?If the answer is yes, then read on....An exciting opportunity to join an established building services company based in London has arisen! CBW Staffing Solutions are currently recruiting a Junior Maintenance Engineer either of an electrical, mechanical, or plumbing background, to be based in a commercial building in the City of London. He or she or they will be required to carry out planned and reactive building maintenance alongside the maintenance team on site. This person will be working closely with a senior member of the team and the team on-site to gain experience and training of building services.The successful candidate will understand Facilities Maintenance and have some experience in building maintenance. In return, the company is offering a competitive salary of up to £40,000, overtime, plenty of further training and a potential route into further career progression. Hours of workMonday to Friday – 08:00 am to 17:00 pm25 days holiday + Bank holidaysOvertime availableFurther trainingCompany pensionKey Duties & ResponsibilitiesLighting (Small installation, Fault-finding, Lamping, etc)Emergency lighting tests & Fire alarm tests Plant room maintenanceAir Handling Units / Fan Coil Unit (Filter changes, cleaning)Control PanelsChanging BallastBMS System - Monitor (i.e. Hot & cold)Carry out all aspects of M&E/Fabric maintenanceMaintain and update Log booksPlumbing - Unblocking toiletsPumps, motorsRequirementsElectrically qualified - City & Guilds Level 3 or mechanically City & Guilds Level 2Must be able to provide copies of your trade certificatesA proven track record in commercial building maintenanceHard working attitudeGood communication skillsClient FacingIf you are interested please email your CV to Alex Denton of CBW Staffing Solutions....Read more...
Shift Engineer – Client Direct – Luxury Hotel / Members Club – South Kensington– £34,000My client is looking for a Shift Engineer to be based in a Luxury Hotel / members club in South Kensington, London. The successful candidates will have worked in a similar hotel environment previously. Working with the maintenance team on site, He or she will be required to carry out mechanical, electrical & fabric maintenance works. In return, the company offers a competitive salary of £34,000 further training and career progression. Package£34,000Meal on shiftDiscounted hotel roomsUniform providedOvertime AvailableCycle to work schemePensionInternal Progression & Development Hours of work4 on 4 off shiftDays shift or mix of days and nights Key Duties & ResponsibilitiesMonitor mechanical plantPumps, Motors, Seals, BearingsAir Conditioning - Air Handling Units / Fan Coil Units (Filter changes, cleaning)Water Treatment (Temperature checks / Not dosing)Plumbing - Unblocking toilets, replacing taps, washers etcMonitor the BMS systems.Basic electrical duties (Lamp changes etc)General building fabricEscort specialist subcontractorsEnsure that the Contractual efficiently meets all the relevant KPI & SLA requirements.Undertake all allocated tasks and perform them in a timely and professional manner.Be proactive in identifying and reporting faults with building services equipment and take steps to resolve them.Be proactive to ensure all H&S issues are reported/escalated as required.Maintain informal communications with Client staff members related to service levels and issues.Report service affecting issued to the site management team for formal communication with the client.Remain flexible with regard to site attendance and tasks undertaken within personal competency. RequirementsExperience working in a lhotelA proven track record in commercial building maintenanceMulti-skilledGood communication skillsExcellent customer skillsIf you are interested please get in contact with Fin Havering of CBW Staffing solutions!....Read more...
