Electronic Manufacturing Technician required to test, fault find and repair various electrical or electronic systems and components of rotary steerable systems, Measurement While Drilling tools, Specialised Measurement tools and Rechargeable Batteries for Downhole use and power source products.
You will work as part of engineering and quality driven manufacturing teams covering Mechanical manufacturing Technicians and supervisors integrating and testing electrical and electromechanical tools. You will also be responsible for maintaining and repairing the test equipment used to test tools.
Experience
Electronic technician experience of testing, low and high voltage experience, basic soldering, crimping, and assembly.
Basic fault finding and rectification at system and component level.
Further education in Electrical or Electronic engineering (ONC, HNC, HND, NVQ Level 2)
Working within design constraints.
Multi-meter, Oscilloscope, Low Voltage Power Supplies, High Voltage Power Supply (up to 400VDC) to make measurements on and for test and debugging of electromechanical assemblies
Responsibilities
Producing deliverable items from full drawing packs with minimal additional help to relevant IPC standards. ....Read more...
Electronic Manufacturing Technician required to test, fault find and repair various electrical or electronic systems and components of rotary steerable systems, Measurement While Drilling tools, Specialised Measurement tools and Rechargeable Batteries for Downhole use and power source products.
You will work as part of engineering and quality driven manufacturing teams covering Mechanical manufacturing Technicians and supervisors integrating and testing electrical and electromechanical tools. You will also be responsible for maintaining and repairing the test equipment used to test tools.
Experience
Electronic technician experience of testing, low and high voltage experience, basic soldering, crimping, and assembly.
Basic fault finding and rectification at system and component level.
Further education in Electrical or Electronic engineering (ONC, HNC, HND, NVQ Level 2)
Working within design constraints.
Multi-meter, Oscilloscope, Low Voltage Power Supplies, High Voltage Power Supply (up to 400VDC) to make measurements on and for test and debugging of electromechanical assemblies
Responsibilities
Producing deliverable items from full drawing packs with minimal additional help to relevant IPC standards. ....Read more...
You will learn how products are designed, manufactured, and assured to the highest standards while rotating through areas such as sheet metal fabrication, assembly, quality assurance, quality control, research and development, sales, and procurement. This is an excellent opportunity to develop a strong foundation in engineering and discover where your strengths and interests lie within a leading manufacturing environment.
The successful candidate will join the team in February/March 2026 in a pre-apprenticeship role, with the registered apprenticeship and associated training beginning in September 2026. As an Engineering & Manufacturing Technician Apprentice, you will learn to support production with new product introduction, project requirements and continuous improvement.
Reporting into the Engineering manager. You will learn a variety of working activities that will in turn support the team to ensure that our products are delivered on time to quality, environmental and cost targets.
As an Engineering & Manufacturing Technician Apprentice, you will have a wide range of responsibilities, as part of the role, some of your responsibilities will be:
Learning and understanding the manufacturing processes and capabilities
Helping to create operating instructions and procedures
Supporting quality assurance and quality control activities
Providing support to production and engineering
Actioning manufacturing deficiency reports
Creating sales general arrangement drawings
Actioning change request notes
Producing drawings, models and bills of materials to sales and customers specifications
Learning 2D and 3D CAD
Training:As an Engineering & Manufacturing Technician Apprentice, you will be studying a Level 3 Engineering and Manufacturing Support Technician Apprenticeship. Throughout your apprenticeship with Elta-UK Limited, you will be supported by your company mentor and your PETA Learning and Development Coach.
Your Level 3 programme will include a level 3 Engineering work-based qualification delivered by PETA and weekly day-release training at the Havant site, completed over 48 months.Training Outcome:Elta-UK Limited have successfully been supporting Apprentices previously and are proud to be training people on the job for the future. The career opportunities at Elta-UK Limited are varied following the completion of the apprenticeship, there may be the potential for:
Full-time employment
Further personal development within your chosen area of interest
Employer Description:Elta-UK Limited is an international leading manufacturer of ventilation and air quality solutions, We design and produce high-quality air movement products – including fans, air handling units, controls and noise-control equipment – for commercial, industrial, OEM, residential and international markets.
Part of the global Elta Group, Elta-UK Limited operates from our Fareham site in Hampshire and additional locations across the UK and Ireland. We combine engineering excellence with expert technical support to deliver reliable, innovative solutions that improve indoor environments and promote healthier, cleaner air.
Over the decades, Elta-UK Limited has continually invested in advanced manufacturing capabilities and industry-leading technology, earning a reputation for quality, performance and service. Today, our products and expertise support a wide range of sectors worldwide, reinforcing our position as a trusted name in ventilation and air quality engineering.Working Hours :Monday- Thursday, 07.45- 16.15.
Friday, 07.45 - 13.15.
Half an hour unpaid break.Skills: Communication skills,IT skills,Attention to detail,Team working,Initiative,Adaptable,Willingness to learn,Time management,Ability to prioritise....Read more...
JOB DESCRIPTION
Position Summary: The Process Technician will be responsible for production assigned duties. This includes but is not limited to batch and process manufacturing, compliance responsibilities, inventory control, bulk material handling, and packaging. There are three categories for a Process Technician; C, B, & A where A is most senior and technically proficient. In addition, Process Technician A will be required as needed to fill in for the duties of Production Supervisors. Process Technician A will have a full understanding and ability to perform assigned tasks as well as assist Level B & C as well as Utility with their assigned task.
Specific Requirements:
Works directly with Production Supervisors, other Process Technician, Utility, and others in the safe handling of the equipment and chemical intermediates in both storage and use in production. Have good command and general working knowledge of manufacturing equipment. Comprehension of manufacturing techniques and demonstrates safety compliances Executes tasks and project responsibilities as outlined and assigned from the compliance calendar, production worklist, expected delivery report, and verbal / written instructions from Supervisors and Management. Inventory Control through cycle counts, batch log & MUS record keeping, and filling or transferring documentation. Assists in management and development of processes and safety programs Manages inventory reduction per departmental inventory reduction strategy Participates in all environmental and safety training as required by Federal, State, County, and Local regulations as well as company policies and demonstrates compliance through work practice. The above description identifies only the primary duties pertaining to this position. Additional tasks are performed, as required, and do not significantly alter this description.
Background Requirements:
HS Diploma Minimum of 2 years related experience. Ability to lift/move up to 50 lbs daily and occasionally life/move up to 75 lbs.
Benefits: 401k w/ company match after 6 months, Pension Plan, Medical/Dental/Vision Insurance, flexible schedule, life insurance, tuition reimbursement.Apply for this ad Online!....Read more...
A fantastic opportunity has arisen for a Mechanical Manufacturing Technician at a leading company. You will be working with the production team comprised of Electrical assemblers, Electrical manufacturing Technicians, and supervisors
Key requirements
Good competencies with electrical tools and general test equipment.
Capable of producing deliverable items from full drawing packs with minimal additional help.
Good mechanical technician skills. Experience with various hand tools and assembly tools (presses)
Testing, low and high voltage assemblies, basic soldering, crimping, and mechanical lifting.
Basic fault finding when necessary.
Key skills
Experience in mechanical assembly and pressure equipment. Experience in documentation, working with drawings.
As part of the recruitment process a practical test will be performed. The test will involve building a standard sub-assembly.
Experience in fault finding, repairing electromechanically systems....Read more...
A fantastic opportunity has arisen for a Mechanical Manufacturing Technician at a leading company. You will be working with the production team comprised of Electrical assemblers, Electrical manufacturing Technicians, and supervisors
Key requirements
Good competencies with electrical tools and general test equipment.
Capable of producing deliverable items from full drawing packs with minimal additional help.
Good mechanical technician skills. Experience with various hand tools and assembly tools (presses)
Testing, low and high voltage assemblies, basic soldering, crimping, and mechanical lifting.
Basic fault finding when necessary.
Key skills
Experience in mechanical assembly and pressure equipment. Experience in documentation, working with drawings.
As part of the recruitment process a practical test will be performed. The test will involve building a standard sub-assembly.
Experience in fault finding, repairing electromechanically systems....Read more...
Quality Control Technician required to join an Engineering manufacturing and assembly production quality team who inspect and test equipment. You will have practical skills and understand the impact of stotting and resolving any issues or nonconformances early.
Requirements
Production or Manufacturing Quality exposure.
Responsibilities
Inspect documentation, parts, components, materials, and equipment against specifications.
Quality Control Technician required to join an Engineering manufacturing and assembly production quality team who inspect and test equipment. You will have practical skills and understand the impact of stotting and resolving any issues or nonconformances early.
Requirements
Production or Manufacturing Quality exposure.
Responsibilities
Inspect documentation, parts, components, materials, and equipment against specifications.
Looking for a great start to your career in manufacturing, earning and learning on a professionally accredited, award-winning scheme?
We have an exciting opportunity for a Manufacturing Technician Apprentice to support the manufacture and test of our innovative world-class products.
You will be working within a structured training scheme designed to provide you with all the knowledge and skills required. Enabling you to manufacture/test complex world leading products in a fast-paced manufacturing environment at our Basildon site.
What you’ll do as a manufacturing technician Apprentice:
You will learn on the job core technician skills, complimented by problem solving and continuous improvement. This is achieved by undertaking a series of placements covering all aspects of manufacture.
You will then look to specialize in:
Electromechanical assembly
Electro optic assembly
Electronic test
Optical test
Inspection
Our team of in-house experts will support your development whilst you become part of a huge community of apprentices working in Leonardo, throughout the UK.Training:We support helping you settle in to your new location ensuring you are familiar with the team and have a warm welcome from day 1. There is a member of our Apprentice team at each site, helping you progress, ensuring your study time is protected, enabling access to digital learning as well as opportunities to get involved with the local community and STEM projects, enhance many aspects of each programme.Training Outcome: Standard: ST0432 - Engineering Fitter v1.3 (Level 3).
Employer Description:Leonardo is an international leader in electronic and information technologies for defence systems, aerospace, data, infrastructures, land security and protection, and sustainable ’smart’ solutions. We are a continually expanding company, offering exciting opportunities to talented individuals who want to work at the forefront of technology.Working Hours :Monday- Friday
Shifts to be confirmedSkills: Attention to detail,Problem solving skills,Team working....Read more...
Electronic Manufacturing Technician required to work from blueprints to identify electrical and electronic components, prepare wire routing, stripping and crimping. You will join a subsea manufacturing team as part of a industrial production facility.
Requirements
Electrical Assembly experience.
Knowledge of precision production quality processes.
Responsibilities
Electronic component assembly and wiring.
Electrical harness repair
Termination test, measurements
Electronic Manufacturing Technician required to work from blueprints to identify electrical and electronic components, prepare wire routing, stripping and crimping. You will join a subsea manufacturing team as part of a industrial production facility.
Requirements
Electrical Assembly experience.
Knowledge of precision production quality processes.
Responsibilities
Electronic component assembly and wiring.
Electrical harness repair
Termination test, measurements
Equipment Engineering Technician urgently required for a global leading Semiconductor Manufacturing company working a rotating days and nights shift pattern.
A great opportunity for an Equipment Engineering Technician to join my client, based in Towcester, Northamptonshire who are looking to expand their equipment engineering team.
The job is based on a rotating day and night shift pattern (Continental) of 4 on 4 off 12 hours shifts within a cleanroom environment.
Responsibilities of the Equipment Engineering Technician based in the Towcester, Northamptonshire area include maintaining, repairing and improving semiconductor wafer processing equipment. In addition to this you will be diagnosing the root cause of equipment issues, dealing with equipment breakdowns and performing maintenance task and risk assessments.
To be successful in your application for Equipment Engineering Technician job, you will need to have previous experience working with capital equipment in a fast pace environment. You will need to have a background across Electrical, Electronic or Mechanical Engineering disciplines. You will also be educated to minimum HNC/HND level in a relevant engineering based discipline.
Apply Now, if this Equipment Engineering Technician job in Towcester, Northamptonshire sounds like the opportunity for you, click the APPLY NOW button, or alternatively call Tom Drew on 01582 878 848 or email TDrew@redlinegroup.Com quoting THD1374. Alternatively, if this job is not suitable but you are looking for a job within Manufacturing and Operations, please call 01582 878 848 for a confidential discussion.....Read more...
Equipment Technician urgently required for a global leading Semiconductor Manufacturing company working a rotating days and nights shift pattern.
A great opportunity for an Equipment Technician to join my client, based in Oldham, Manchester who are looking to expand their equipment engineering team.
The job is based on a rotating day and night shift pattern (Continental) of 4 on 4 off 12 hours shifts within a cleanroom environment. Candidates must also be clean shaven for the breathing apparatus.
Responsibilities of the Equipment Technician based in the Oldham, Manchester area include maintaining, repairing and improving semiconductor wafer processing equipment. In addition to this you will be diagnosing the root cause of equipment issues, dealing with equipment breakdowns and performing maintenance task and risk assessments.
To be successful in your application for the Equipment Technician job, you will need to have previous experience working with capital equipment in a fast pace environment. You will need to have a background across Electrical, Electronic or Mechanical Engineering disciplines. You will also be educated to minimum HNC/HND level in a relevant engineering based discipline.
Apply Now, if this Equipment Technician job in Oldham, Manchester sounds like the opportunity for you, click the APPLY NOW button, or alternatively call Tom Drew on 01582 878 848 or email TDrew@redlinegroup.Com quoting THD1367. Alternatively, if this job is not suitable but you are looking for a job within Manufacturing and Operations, please call 01582 878 848 for a confidential discussion.....Read more...
What will the apprentice be doing?
The Engineering team includes Manufacturing Technicians who are line-based Engineers predominantly on our fast paced highly automated Nurofen and Strepsils packaging lines and specialist support Technicians covering Manufacturing to Packing and Site Services
You will be given a structured training pack which you will work through during your apprenticeship, and you will be given various work placements to gain the skillset required to come out of your time a well-rounded engineer
Day to day tasks will include:
Developing a safety and quality mindset first and foremost developed by working closely with all functions
Prioritising Engineering Tasks
Using and communicating technical information
Producing components using hand fitting techniques
Maintaining mechanical devices and equipment
Maintaining electrical equipment and systems
Additional training will be provided outside of the apprenticeship programme to include:
All the relevant Safety and Quality Training to operate successfully in a Pharmaceutical Environment.
Role specific basic and advanced electric training
SAP, Continuous Improvement (CI and Six Sigma) and other softer skills (Presentation Skills, Impact and Influence etc other systems associated with pharmaceutical manufacturing
What will apprentice’s study?
Core Knowledge:
A Technician will understand:
first principles relating to the operation and maintenance of appropriate plant and equipment
relevant industry health and safety standards, regulations, and environmental and regulatory requirements
maintenance and operational practices, processes and procedures covering a range of plant and equipment
the relevant engineering theories and principles relative to their occupation
Core Skills:
A Technician will apply their knowledge of plant and systems to safely perform maintenance and operational activities with minimum supervision
This will require them to:
Comply with industry health, safety and environmental working practices and regulations
Locate, and rectify faults on plant and equipment
Communicate with and provide information to stakeholders in line with personal role and responsibilities
Read, understand and interpret information and work in compliance with technical specifications and supporting documentation
Prepare work areas to undertake work related activities and reinstate those areas after the completion of the work-related activities
Inspect and maintain appropriate plant and equipment to meet operational requirements
Assess and test the performance and condition of plant and equipment
Communicate, handover and confirm that the appropriate engineering process has been completed to specification
Training:Maintenance and Operations Engineering TechnicianLevel 3:
Embedded qualification:
Embedded qualification to ensure all knowledge is provided (Diploma in Engineering Technology)
Training will be delivered one day per week, term time, and is based at Nottingham College Ruddington site and facilities are in creation to enrich the student experience, developing them with the necessary skills using industry recognised equipment to ensure the apprentice receives training closely matched to the employer’s and industry
https://skillsengland.education.gov.uk/apprenticeships/st0154-v1-6Training Outcome:A permanent role may be offered at the end of and successful completion of the Apprenticeship Programme.
Roles could include:
Manufacturing Technician
Shift Technician
Asset Care Technician
C&I Technician
Site Services Technician
Our apprenticeship programme is designed to enable us to recruit to a career path and to a specific end role.
Details of career paths and options will be shared with each apprentice by the company mentor.
For applicants with the right attitude the opportunities are real.Employer Description:The Reckitt purpose is to protect, heal and nurture in in the relentless pursuit of a cleaner, healthier world. Here on the Nottingham site we manufacture, pack and distribute products to a global market including, Nurofen, Strepsils (Mucinex – a product not sold in the UK), and Optrex. There are circa 800 employees on site here at Nottingham and we operate on a shift working basis in a GMP (good manufacturing practice) environment which is highly regulated.Working Hours :Year 1 could be days, or 2 shifts based (8-hour am and pm shifts)
Year 2 will be 2 shifts based (8-hour am and pm shifts)
Year 3 could be 2 shifts based (8-hour am and pm shifts) or 3 Shift Based including nightsSkills: Communication skills,IT skills,Attention to detail,Organisation skills,Problem solving skills,Number skills,Analytical skills,Logical,Team working,Initiative....Read more...
A leading global technology company in the energy sector is seeking a Mechanical Assembly Test Technician required to perform technical and mechanical quality control tasks to support production, assembly, and testing processes. You will contribute to maintaining high quality standards and continuous improvement across manufacturing operations.
Requirements
Quality Control.
Hands on experience in mechanical assembly, testing, or manufacturing environments.
Familiarity with hydraulic, electronic, and mechanical systems.
Responsibilities
Perform technical duties across mechanical, electronic, and system-based projects.
Conduct testing, measurements, and process controls on key production lines.
Read and interpret engineering drawings and job documentation ( work orders, bills of materials).
Troubleshoot and repair product or process issues.
Maintain tools, machinery, and equipment to ensure operational efficiency.
Support continuous improvement using modern manufacturing principles.....Read more...
A leading global technology company in the energy sector is seeking a Mechanical Assembly Test Technician required to perform technical and mechanical quality control tasks to support production, assembly, and testing processes. You will contribute to maintaining high quality standards and continuous improvement across manufacturing operations.
Requirements
Quality Control.
Hands on experience in mechanical assembly, testing, or manufacturing environments.
Familiarity with hydraulic, electronic, and mechanical systems.
Responsibilities
Perform technical duties across mechanical, electronic, and system-based projects.
Conduct testing, measurements, and process controls on key production lines.
Read and interpret engineering drawings and job documentation ( work orders, bills of materials).
Troubleshoot and repair product or process issues.
Maintain tools, machinery, and equipment to ensure operational efficiency.
Support continuous improvement using modern manufacturing principles.....Read more...
KEY RESPONSIBILITIES
Diligent application to study the EMST route on day release and within company time to achieve a successful outcome with qualification.
Diligent application of learning in the workplace to demonstrate the learning and knowledge gained.
Attending regular monitoring review meetings with the appointed training officer.
Gathering a portfolio of on-the-job learning and work evidence to meet the needs of the apprenticeship programme and End-point Assessment.
Satisfactorily completing assignments and consolidating the training and work undertaken in the time frame agreed.
Manufacture (Assembly & Test) of production units as a primary role with rotation in other company departments throughout the apprenticeship programme.
Applying a conscientious attitude in the workplace, contributing to the departmental goals and objectives.
Ensure familiarisation and adherence to the Quality, Environmental and Health and Safety management systems, including workmanship standards, static handling precautions and high voltage control measures.
Keep informed and support EMS and improvement team activities and IS09001 - Quality and ISO 14001- Environmental requirements, including lean initiatives.
Work with other team members to continuously improve quality and processes.
Responsibility for adhering to the Company’s ISO 9001 Quality, ISO14001 Environmental and Health and Safety management systems.
Training:Programme of learning will consist of 2 years day release to study the Level 3 EAL Diploma in Engineering and Manufacturing Support Technologies (EMST) knowledge qualification. This study path is combined with workplace learning.
When at work, the technician will be employed in Manufacturing to support the application of learning from college and enable the gathering of evidence of learning and application for completion of the Level 3 Diploma in Advanced Manufacturing Engineering – Technical Support Technician (development competence) qualification. The objective at the end of the 42-month programme is qualification and permanent employment as a Test and Repair Technician. Training Outcome:To become a fully trained and qualified Test and Repair Technician with Spellman.Employer Description:Spellman High Voltage Electronics Ltd, UK specialising in the design, manufacture and after sales support of precision high voltage power supplies and other systems.Working Hours :Mon-Thurs 8.15am to 5.00pm (½ hour lunch break) / Fri 8.15am to 12.45pm (no lunch break). (Flexible working with wide range of shifts available).Skills: Communication skills,IT skills,Problem solving skills,Logical....Read more...
Electrical, Control & Instrumentation Technician
Salary: £46,800 Location: Wakefield Contract Type: Permanent Role: EC&I Technician
EC&I Technician role available! We are looking for someone to join a successful Chemical Manufacturing company. The Electrical Controls & Instrumentation Technician is responsible for installing, maintaining, troubleshooting, and optimizing electrical, control, and instrumentation systems used in chemical manufacturing operations. This company is heavily investing into their site and staff, and it is a great opportunity for those looking for a change of environment and great culture. This company has a direct presence across four continents’ and meets customers’ needs worldwide.
Benefits:
Death in service benefit – 3x annual salary
Critical illness cover
25 days holiday bank holidays
Matched pension contribution scheme up to a total employer contribution of 10%
Qualifications & Skills Required for the EC&I Technician Position:
Level 3 Electrical engineering qualification or apprenticeship.
BS7671 Wiring Regulations training.
Understanding of the Electricity at Work Regulations.
Experience maintaining EC&I systems in an industrial environment.
Ability to interpret electrical and instrumentation drawings.
Good communication skills; data-driven approach.
Responsibilities of the EC&I Technician:
Perform planned preventative maintenance on electrical, control, and instrumentation systems.
Diagnose faults and repair plant equipment efficiently to minimise downtime.
Maintain and improve electrical distribution systems
Support upkeep of SCADA, DCS, PLC, and hard‑wired control systems.
Conduct functional testing of process controls, safety systems, and critical alarms.
Carry out routine calibrations of instrumentation.
Maintain accurate maintenance records within the CMMS system.
Work in compliance with the Health & Safety at Work Act, COMAH requirements, and site-specific SHE policies.
Safely isolate equipment following LOTOTO procedures.
Complete risk assessments for routine and non‑routine tasks.
Please apply directly for further information regarding this EC&I Technician role.....Read more...
What you will do:
CAD Design & Modelling: Produce accurate 2D/3D CAD drawings for timber frame projects, including wall panels, floor joists, and roof trusses.
Manufacturing Prep: Generate detailed construction information, material quantity take-offs, and CNC (computer numerical control) files.
Technical Compliance: Ensure all designs comply with building regulations, safety standards, and are fit for purpose.
Collaboration: Work closely with architects, structural engineers, and our factory production team to resolve technical queries.
Training:Apprenticeship Standard for Design and Build Technician Level 4 with Learning Skills Partnership. Online tutor led sessions with blended learning, once a week during term time.Training Outcome:What We Offer:
Nationally recognised Level 4 Construction Design and Build Technician qualification.
Hands-on experience in a leading offsite manufacturing facility.
Mentorship from highly experienced design technicians.
Clear career progression into roles such as Design Technician or Project Coordinator.
Employer Description:Focusing on sustainability and energy efficient buildings Buildakit are an award winning leading manufacturer of precision engineered timber frame homes. For over 25 years we have been supplying and installing structural timber frame systems to the residential market.Working Hours :37.5 hours per week. Shifts to be confirmed.Skills: Communication skills,Organisation skills,Analytical skills,Team working....Read more...
We are looking for an Assembly Technician to support the production of advanced rechargeable battery cells and battery packs. This role involves hands-on assembly, testing, and troubleshooting within a manufacturing environment, contributing to high-quality product delivery and continuous improvement initiatives.
Key Responsibilities
Interpret assembly drawings, procedures, and technical instructions (written and verbal), providing feedback where required
Identify components and use appropriate tools, equipment, and assembly techniques safely and accurately
Assemble battery cells into completed battery packs
Troubleshoot and resolve issues related to products and assemblies
Accurately record labour and production data within internal systems
Participate in 5S activities and support lean manufacturing initiatives
Skills and Experience
Experience working in a manufacturing or assembly environment
Ability to handle delicate materials ( thin films, coatings, winding processes) is advantageous
Basic to intermediate soldering skills, including Tinning, Splicing , Turret soldering , Crimping
High school education (or equivalent) ....Read more...
We are looking for an Assembly Technician to support the production of advanced rechargeable battery cells and battery packs. This role involves hands-on assembly, testing, and troubleshooting within a manufacturing environment, contributing to high-quality product delivery and continuous improvement initiatives.
Key Responsibilities
Interpret assembly drawings, procedures, and technical instructions (written and verbal), providing feedback where required
Identify components and use appropriate tools, equipment, and assembly techniques safely and accurately
Assemble battery cells into completed battery packs
Troubleshoot and resolve issues related to products and assemblies
Accurately record labour and production data within internal systems
Participate in 5S activities and support lean manufacturing initiatives
Skills and Experience
Experience working in a manufacturing or assembly environment
Ability to handle delicate materials ( thin films, coatings, winding processes) is advantageous
Basic to intermediate soldering skills, including Tinning, Splicing , Turret soldering , Crimping
High school education (or equivalent) ....Read more...
IT Support Analyst Bristol £35,000 - £40,000 DOE Manufacturing Environment | On-Site Role | Career Development Opportunity A rapidly growing manufacturer based in Bristol is seeking an IT Support Technician to join their team in a newly created position. This is a hands-on, site-based role offering real autonomy and long-term technical development. You'll act as the first point of contact for IT support across the business, ensuring the smooth operation of desktops, networks, servers, and manufacturing IT systems. This role is ideal for someone who enjoys working in a fast-paced, IT-dependent environment and wants to expand their skills in SQL, JavaScript, and ERP systems. Key Responsibilities ·Provide on-site IT support for desktops, laptops, mobile devices/scanners and printers ·Troubleshoot hardware, software, connectivity, VPN, WAN and user access issues ·Support Microsoft 365 and end-user applications including ERP ·Act as first responder for IT incidents and system outages ·Support manufacturing/shop-floor IT systems ·Liaise with Managed Service Provider (MSPs) to escalate and resolve complex issues ·Maintain accurate documentation and ticket updates ·Assist with ERP user setup, support and documentation Required Skills & Experience ·Proven experience in an IT Support Technician, IT Support Analyst, or similar role ·Strong knowledge of Windows environments and Microsoft 365 ·Experience supporting desktops, laptops, printers and networked devices ·Understanding of client/server networking, VPNs, WANs ·Experience in a manufacturing or food production environment (desirable) ·ERP system user administration experience (desirable) ·Strong troubleshooting and problem-solving skills ·Excellent communication and customer service skills Development Opportunity This role offers genuine career progression. You will have the opportunity to develop skills in: ·SQL ·JavaScript ·ERP systems ·Working alongside MSPs on infrastructure and development projects ....Read more...
This occupation is found in a wide range of organisations, including but not exclusively, chemical, primary and secondary pharmaceutical, biotechnology, formulated products, nuclear companies; and analytical science services, dental laboratories and educational establishments.
The broad purpose of the occupation is working at the forefront of technology to carry out both routine and one-off laboratory testing (and manufacturing where relevant) and perform a variety of technical support functions across the organisation.
In their daily work, an employee in this occupation interacts with the laboratory manager and colleagues, internal departments such as manufacturing, procurement and quality, internal customers such as medical staff, teaching staff and students, external suppliers and customers such as service engineers, delivery drivers, regulatory bodies and inspection teams e.g. HSE.Training Outcome:
Laboratory Technician / Junior Technician. Building core technical skills, carrying out routine testing, sample preparation, equipment calibration and data recording.
Senior Laboratory Technician. Taking on increased responsibility for complex analyses, quality control, mentoring apprentices or juniors, and supporting method development.
Specialist or Lead Technician (subject to performance and business need). Developing expertise in a specific analytical area, overseeing laboratory processes, training others, and contributing to continuous improvement.
Employer Description:At CPI we work with our partners to translate inventions into products and processes that enhance health and well-being, protect and improve our environment and increase productivity across industries. With a deep understanding of innovation processes and funding, outstanding technical expertise and industry relevant assets, we enable products and processes to be quickly and cost-effectively brought to market.Working Hours :Monday to Friday 08:30am to 05:00pm and Friday 08:30am and 4:30pm.Skills: Communication skills,IT skills,Attention to detail,Organisation skills,Problem solving skills,Presentation skills,Administrative skills,Number skills,Analytical skills,Logical,Team working,Creative,Initiative,Patience....Read more...
Cogent Skills is working with DePuy Synthes to recruit an Apprentice Mechatronics Technician (Mechanical/Electrical) to work at its manufacturing plant in Leeds. This is a fantastic opportunity to work for a global medical device manufacturing company with great development opportunities.
The Mechatronics Technician will undertake installation, testing, servicing, removal, replacement, maintenance and repair of a range of electrical plant and equipment as part of planned preventative and reactive maintenance programmes.
At the end of their training, the Technician will apply their knowledge of plant and systems to safely perform maintenance and operational activities with minimum supervision. This will require them to:
Comply with industry health, safety and environmental working practices and regulations
Locate and rectify faults on plant and equipment
Read, understand and interpret information and work in compliance with technical specifications and supporting documentation
Inspect and maintain appropriate plant and equipment to meet operational requirements
Assess and test the performance and condition of plant and equipment
Communicate, handover and confirm that the appropriate engineering process has been completed to specification
Position, assemble, install and dismantle electrical plant and equipment, which will include motors, switchgear, cables & conductors, to agreed specifications
Carry out planned, unplanned and preventative maintenance procedures on electrical plant and equipment.
Replace, repair and/or remove components in electrical plant and equipment and ensure its return to operational condition.
Diagnose and determine the cause of faults in electrical plant and equipment
The apprentice will follow the employer-led Mechatronics Technician Apprenticeship Standard, which combines practical, technical and behavioural training with theoretical knowledge of relevant science and technology.
The apprenticeship offered by DePuy Synthes blends both theoretical learning and hands-on experience. During the first six months of the programme, apprentices will focus on building their theoretical knowledge, before progressing into practical, on-the-job experience, alongside day release at college for continued learning.
DePuy Synthes is committed to developing the talent of new employees and supporting them throughout their career journey.
You will work alongside qualified engineers who will support you in developing your skills within a manufacturing environment. You will be part of an energised and supportive workplace, benefit from a dedicated mentor, and earn a competitive salary while you learn.Training:Qualification to be delivered: EAL - Level 3 Diploma in Advanced Manufacturing Engineering.
Apprenticeship Standard: Mechatronics Maintenance Technician.
Training Provider: AMRC Training Centre.
Delivery model: The first six months of the programme will be based at the AMRC Training Centre:
AMRC Training CentreAdvanced Manufacturing ParkOff Highfield SpringCatcliffeRotherhamS60 5BL
Apprentices will need to be able to travel to the training centre each day during this period.
Following the foundation stage of the programme, from month 7 onwards the apprentices will be based on site at DePuy in Leeds. During this time, they will be required to attend the AMRC Training Centre one day per week.
Programme structure:
Year 1 – 30-week practical block training at the AMRC Training Centre, alongside the first year of Development Knowledge (day release)
Year 2 – Completion of the second year of Development Knowledge
Year 3 – In-company training and development
Training Outcome:If you demonstrate a pro-active practical aptitude with problem solving skills and are willing to accept responsibility, there will be great opportunities for progression within the company potentially to gain an engineering degree qualification.Employer Description:As the specialists in skills for science and technology, our purpose is to make sure your business; your people and our industry are future ready.
We are a not-for-profit charitable organisation with a family of commercially focused companies committed to supporting the skills, needs and ambitions across the UK science and technology sector.Working Hours :Monday to Thursday 07:00 - 15:30
Friday 07:00 - 12:30. Day release 1-day per week at AMRC.Skills: Communication skills,Attention to detail,Organisation skills,Problem solving skills,Analytical skills,Logical....Read more...
Electronic Manufacturing Technician required to test, fault find and repair various electrical or electronic systems and components of rotary steerable systems, Measurement While Drilling tools, Specialised Measurement tools and Rechargeable Batteries for Downhole use and power source products.
Experience
Electronic technician experience of testing, low and high voltage experience, basic soldering, crimping, and assembly.
Basic fault finding and rectification at system and component level.
Further education in Electrical or Electronic engineering (ONC, HNC, HND, NVQ Level 2)
Responsibilities
Producing deliverable items from full drawing packs with minimal additional help to relevant IPC standards. ....Read more...
