Experienced Well Abandonment or Senior P&A Well Engineer, ideally with North Sea exposure required to review historic well records and generate a Well Engineering Summary Pack including Well Status Diagrams and summary tables for a North Sea Platform, associated subsea tieback developments and legacy E&A wells.
You are likely to be a well engineer with over three years North Sea experience and good understanding of platform well, subsea well and subsurface terminology and significance.
Responsibilities
Interpret drilling reports and other well records with understanding of the potential implications of significant events.
Understand relevance of subsurface data design inputs, general abandonment design philosophy and UK industry guidelines.
Generate basic but clear Well Status Diagrams in Excel, with emphasis on demonstrating barrier quality.
Assess leak risk for each barrier based on historic data
Relate abandonment designs and quality to field wide wellbore penetration plumbing diagram and potential impacts on subsurface assumptions for crossflow.....Read more...
Experienced Well Abandonment or Senior P&A Well Engineer, ideally with North Sea exposure required to review historic well records and generate a Well Engineering Summary Pack including Well Status Diagrams and summary tables for a North Sea Platform, associated subsea tieback developments and legacy E&A wells.
You are likely to be a well engineer with over three years North Sea experience and good understanding of platform well, subsea well and subsurface terminology and significance.
Responsibilities
Interpret drilling reports and other well records with understanding of the potential implications of significant events.
Understand relevance of subsurface data design inputs, general abandonment design philosophy and UK industry guidelines.
Generate basic but clear Well Status Diagrams in Excel, with emphasis on demonstrating barrier quality.
Assess leak risk for each barrier based on historic data
Relate abandonment designs and quality to field wide wellbore penetration plumbing diagram and potential impacts on subsurface assumptions for crossflow.....Read more...
Salary: £42,000 - £47,000 Location: Stonehouse, Gloucestershire Working Pattern: Monday to Friday Benefits: Excellent benefits package | Career development | Training and progression | Innovation-led manufacturing environment
Are you an experienced engineer with a strong background in manufacturing, quality and continuous improvement?
This is an excellent opportunity to join an innovative manufacturing business, where you’ll lead technical projects and optimise processes to deliver measurable results across quality, efficiency, cost, throughput and yield.
The Role
Reporting to the Quality Assurance Manager, you’ll work closely with manufacturing, quality and development teams to identify opportunities and deliver sustainable results. As an engineer, you’ll provide technical expertise across the site and support targeted improvement initiatives.
You’ll be responsible for:
Leading process improvement projects focused on efficiency, quality, cost, throughput and yield.
Providing technical support and advice to manufacturing teams as plant performance and customer requirements change.
Using structured problem-solving techniques to identify root causes and improve process performance.
Analysing quality and manufacturing data to identify trends, compliance gaps and improvement opportunities.
Leading complex troubleshooting activities and supporting the development and training of manufacturing teams.
Supporting the introduction of new products, processes and equipment into manufacturing operations.
Driving quality control, including reducing customer complaints, non-conformances and audit findings.
Providing technical input into customer complaint investigations and non-conformance management.
Leading plant trials and experimental programmes in line with Management of Change requirements.
Acting as the manufacturing link for new product development programmes.
About You
You’ll be a technically strong engineer who enjoys solving problems and turning data into practical improvements. You’ll be confident working across multiple functions and influencing teams at different levels. The successful candidate will take ownership of each improvement opportunity and ensure solutions deliver lasting value.
You’ll ideally have:
A degree or equivalent qualification in Engineering, Materials Science or another relevant technical discipline.
Significant experience delivering process improvements within a manufacturing or industrial environment.
Practical experience with Lean, Six Sigma or similar methodologies; Green Belt would be advantageous.
Strong analytical and problem-solving skills, with the ability to use data to make informed decisions.
Experience working within a formal Quality Management System.
Knowledge of FMEA, control plans, regulatory compliance and product testing.
Strong communication and influencing skills, with the ability to work effectively with both technical and operational teams.
An engineer with a proven track record of delivering sustainable improvements, quality gains and cost savings through technical projects.
Why Join?
You’ll be joining an innovative, technology-driven manufacturing environment where your technical expertise will have a genuine impact. The business places a strong emphasis on professional development and empowering its people to identify better ways of working.
You’ll have the opportunity to work on technically challenging projects, collaborate across departments and contribute to new product and process development. This is a role where an experienced engineer can make a tangible difference to manufacturing performance and quality.
If this role could be of interest to you, please contact Georgie Ireland at E3 Recruitment to find out more.
....Read more...
DevOps Engineer – FinTech – Newcastle
(Tech stack: DevOps Engineer, PowerShell, C#, Java, Python, Ansible, Terraform, Docker, Kubernetes, Docker Swarm, ELK, Grafana, CI/CD, TeamCity, SQL Server, Windows, Linux, Programmer, Developer, Architect, DevOps Engineer)
Our client is a cutting-edge FinTech company with a reputation for innovation and excellence. They design and build advanced trading and analytics platforms used globally by some of the world’s leading financial institutions. With ambitious plans for growth and new product launches, they are now seeking a talented DevOps Engineer to join their team in Newcastle.
As a DevOps Engineer, you will be responsible for creating, maintaining, and optimising the infrastructure and pipelines that support highly complex financial software platforms. You’ll work closely with developers and stakeholders, ensuring deployments are seamless, environments are robust, and systems are both secure and scalable. This is a fantastic opportunity to apply your technical expertise in a collaborative, fast-paced environment where innovation is actively encouraged.
The successful candidate will bring:
A 2:1 degree or above in Computer Science (or related), ideally from a top university.
Strong ability in scripting with PowerShell or a similar language.
Hands-on coding skills in at least one of C#, Java, or Python.
Practical knowledge of automation tools such as Terraform or Ansible.
Background in container platforms (e.g., Docker) with orchestration using Kubernetes or Swarm.
Familiarity with system monitoring solutions (e.g., ELK, Grafana, or similar).
Proven track record in building and maintaining CI/CD pipelines, preferably with TeamCity.
Experience working with SQL databases, particularly Microsoft SQL Server.
Comfort managing both Windows and Linux environments.
The ability to communicate clearly with colleagues and clients to resolve challenges and deliver solutions.
Desirable (but not essential):
Working knowledge of Atlassian products such as JIRA or Bitbucket.
Exposure to artifact management tools like Artifactory.
Deployment automation experience with Octopus Deploy.
Awareness of code quality and analysis tools (e.g., SonarQube).
Background with job scheduling platforms such as Control-M.
Experience with major cloud providers (Azure, AWS, GCP).
Familiarity with VMware (vSphere) and storage area networks.
Previous experience in financial services would be advantageous, though not a requirement.
This is an exceptional opportunity to join a forward-thinking organisation where your contributions will directly shape the delivery of world-class FinTech products.
Location: Newcastle, UK (Fully Office Based)
Salary: £50,000 - £90,000 + Bonus + Benefits
Applicants must be based in the UK and have the right to work in the UK.
Noir continues to be the leading Microsoft recruitment agency; we can help you make the right career decisions!
NOIRUKTECHREC
NOIRUKREC....Read more...
Exciting opportunity for a Full-Stack Software Engineer ready to build innovative SaaS products that make cybersecurity measurable every day.Join a fast-growing cybersecurity technology business developing a modern SaaS platform that provides organisations with continuous visibility into their security posture. This Full-Stack Software Engineer role offers genuine ownership, the opportunity to work with AI-powered technologies, and the chance to influence technical decisions within a collaborative engineering team.Company OverviewThis innovative software company specialises in cybersecurity and cloud-based technology, helping businesses continuously assess and improve their security posture. Operating with a modern engineering culture, the organisation values rapid iteration, technical excellence, and close collaboration between developers and customers to deliver meaningful solutions.Job OverviewAs a Full-Stack Software Engineer, you'll take ownership of features from initial concept through deployment and ongoing optimisation. Working across both backend and frontend technologies, you'll contribute to AI-powered functionality, cloud infrastructure, and platform reliability while collaborating directly with a highly experienced product and engineering team.Here's what you'll be doing:Design, develop and maintain full-stack applications using Python and React.Create AI-powered data processing pipelines that transform unstructured information into actionable insights.Build integrations with third-party platforms and validate secure, best-practice implementations.Improve platform reliability, scalability and deployment processes using modern DevOps practices.Collaborate closely with customers and internal stakeholders to deliver high-impact product features.Contribute to architectural discussions and continuously improve engineering standards across the platform.Here are the skills you'll need:Strong commercial experience as a Full-Stack Software Engineer using Python and React or another modern JavaScript framework.Experience working with cloud infrastructure, containerisation and Kubernetes.Solid understanding of Git, CI/CD pipelines and modern software development practices.Experience building scalable SaaS applications with an end-to-end ownership mindset.Excellent problem-solving abilities with the confidence to work independently in an agile environment.Fluent communication skills in both Dutch and English.Desirable experiencePractical experience implementing AI or Large Language Models (LLMs) within commercial software products.Knowledge of LangGraph or similar AI agent frameworks.Interest or experience within cybersecurity, cloud security or security assurance.Passion for adopting emerging AI tools to improve software development workflows.Key perks and benefits:Competitive salary with a comprehensive Belgian benefits package.Hybrid working model with two office days each week and flexible remote working.32+ days annual leave, including statutory holidays and additional ADV leave.Meal vouchers, hospitalisation insurance, group insurance and company car.Real ownership of projects with the opportunity to influence technical direction.Work alongside a highly collaborative engineering team using modern AI-assisted development practices.Why Build Your Career in Cybersecurity Software?Cybersecurity remains one of the fastest-growing sectors in technology, with organisations increasingly investing in cloud security, AI-driven automation and continuous compliance solutions. As a Full-Stack Software Engineer, you'll develop highly transferable skills across software engineering, cloud infrastructure, artificial intelligence and SaaS platforms.This opportunity, presented by The Opportunity Hub UK, offers an excellent pathway for ambitious engineers looking to work on cutting-edge technology while making a measurable impact on customer security outcomes.....Read more...
We are recruiting for a Setting Out Engineer to join a respected UK Groundworks, RC Frame & civil engineering contractor, working on an project in Milton Keynes.
This is an excellent opportunity for a Setting Out Engineer who is passionate about delivering projects to the highest standard while advancing their career.
Key Responsibilities:
Setting out for groundworks, drainage, foundations, RC frames and associated infrastructure.
Establishing and maintaining site control points and survey data.
Producing and maintaining accurate as-built surveys and records.
Interpreting and checking engineering drawings and specifications.
Carrying out QA/QC inspections and completing quality documentation.
Raising and managing RFIs where required.
Monitoring tolerances and ensuring works are delivered to specification.
Liaising with subcontractors, site managers and design teams.
Assisting with site planning and engineering problem solving.
Promoting and maintaining the highest standards of health and safety on site.
Criteria:
Previous experience working as a Setting Out Engineer for a Groundworks, RC Frame or Civil Engineering contractor.
Strong knowledge of foundations, drainage, external works and reinforced concrete structures.
Competent using Leica or Trimble surveying equipment and GPS.
Experience using AutoCAD and interpreting technical drawings.
Strong understanding of QA procedures, as-built surveys and site documentation.
CSCS Card (Essential).
SMSTS or SSSTS (Desirable).
Full UK Driving Licence.
Pay: £280 - 310 per day (depending upon experience).
Duration: 2 months
Hours: 10 hour shifts (Monday - Friday currently).
Apply for more information.
Cavendish Recruitment Professionals Ltd is an equal opportunity employer. We welcome applications from all qualified candidates regardless of gender, race, age, sexual orientation, religion, or belief.....Read more...
We are recruiting for a Setting Out Engineer to join a respected UK Groundworks, RC Frame & civil engineering contractor, working on an project in Cambridge.
This is an excellent opportunity for a Setting Out Engineer who is passionate about delivering projects to the highest standard while advancing their career.
Key Responsibilities:
Setting out for groundworks, drainage, foundations, RC frames and associated infrastructure.
Establishing and maintaining site control points and survey data.
Producing and maintaining accurate as-built surveys and records.
Interpreting and checking engineering drawings and specifications.
Carrying out QA/QC inspections and completing quality documentation.
Raising and managing RFIs where required.
Monitoring tolerances and ensuring works are delivered to specification.
Liaising with subcontractors, site managers and design teams.
Assisting with site planning and engineering problem solving.
Promoting and maintaining the highest standards of health and safety on site.
Criteria:
Previous experience working as a Setting Out Engineer for a Groundworks, RC Frame or Civil Engineering contractor.
Strong knowledge of foundations, drainage, external works and reinforced concrete structures.
Competent using Leica or Trimble surveying equipment and GPS.
Experience using AutoCAD and interpreting technical drawings.
Strong understanding of QA procedures, as-built surveys and site documentation.
CSCS Card (Essential).
SMSTS or SSSTS (Desirable).
Full UK Driving Licence.
Pay: £280 - 330 per day (depending upon experience)Duration: 1 year Hours: 10 hour shifts (Monday - Friday)
Apply for more information.
Cavendish Recruitment Professionals Ltd is an equal opportunity employer. We welcome applications from all qualified candidates regardless of gender, race, age, sexual orientation, religion, or belief.....Read more...
A Systems Engineer is required to join an innovative engineering business developing advanced train-borne monitoring and intelligent technology solutions. This is an exciting opportunity to work across the full systems engineering lifecycle, supporting the development of complex electronic systems from concept through to customer deployment.
This role would suit an engineer with experience in systems engineering, technical bids, systems integration or multidisciplinary engineering, looking to work on cutting-edge rail technology within a collaborative engineering environment.
Responsibilities include:
Develop system architectures, high-level designs and engineering documentation.
Capture and manage customer requirements throughout the project lifecycle.
Support technical bids, proposals, compliance matrices and engineering estimates.
Coordinate the integration of hardware, software and communication systems.
Produce interface specifications and support verification and validation activities.
Support installation, commissioning and customer acceptance testing.
Liaise with customers, suppliers and internal engineering teams to resolve technical challenges.
Identify technical risks and contribute to project planning and delivery.
Key skills & experience:
Degree in Systems, Electronic, Electrical or Computer Engineering (or equivalent experience).
Experience within systems engineering or complex multidisciplinary engineering environments.
Ability to interpret technical specifications and customer requirements.
Knowledge of the systems engineering lifecycle and requirements management.
Experience producing technical documentation and engineering specifications.
Understanding of networking and communication protocols such as Ethernet, TCP/IP, RS232 or RS485.
Excellent communication and problem-solving skills.
Rail, video systems, embedded electronics or systems integration experience would be advantageous.
APPLY NOW
This Systems Engineer job based in Gateshead, Tyne and Wear could be of interest to you.
To apply, please send your CV to adighton@redlinegroup.Com or call Adam Dighton on 01582 878821.....Read more...
A Product Cybersecurity & Firmware Engineer is sought to join an innovative engineering team in Newark, Nottinghamshire, contributing to the development of secure, network-connected embedded products for industry-leading assistive listening solutions.
The Product Cybersecurity & Firmware Engineer, Newark, Nottinghamshire, will be expected to develop and apply your expertise in embedded software development, cybersecurity, and secure networking technologies. Working closely with firmware, software, hardware, compliance, and product management teams, you will play a key role in ensuring products are secure, compliant, and ready for deployment in global markets.
Responsibilities include:
Develop secure embedded software for network-connected products.
Implement cybersecurity features and secure communication protocols.
Identify and resolve security vulnerabilities within embedded systems.
Collaborate with firmware, hardware, software, and compliance teams throughout product development.
Support product cybersecurity assessments and regulatory compliance activities.
Contribute to design reviews, technical problem-solving, and continuous product improvement.
Produce and maintain technical documentation to support development and certification activities.
Key skills & experience:
Degree in Computer Science, Software Engineering, Electronics, or equivalent experience.
Strong embedded software development experience using C/C++.
Experience with network-connected devices and communication protocols such as TCP/IP and HTTPS/TLS.
Knowledge of RTOS environments such as FreeRTOS, ThreadX, or similar.
Understanding of embedded systems, low-level software development, and debugging techniques.
Familiarity with cybersecurity principles and secure product development.
Strong problem-solving skills and the ability to work within multidisciplinary engineering teams.
How to apply:
Apply now for the Product Cybersecurity & Firmware Engineer role in Newark, Nottinghamshire. Send your CV to adighton@redlinegroup.Com or call Adam on 01582878821
....Read more...
Senior Developer - Upper Austria (Innviertel region) / Hybrid
(Senior .NET Developer, .NET Software Engineer, Softwareentwickler, Entwickler, C#, WPF, Entity Framework, MS SQL Server, MVVM, dependency injection, SOLID principles, MS Visual Studio, Programmer, Softwareentwickler, Entwickler, .NET Software Engineer, .NET Developer)
My client are one of the fastest growing Software Companies in Austria. Established in the Software Solutions market for over 40 years, they are seeking ambitious Senior .NET Software Engineers to develop a new core software product that will revolutionise the industry.
Working in an Agile Scrum team, the successful candidate will contribute to code, design reviews and complex technical challenges. Strong, hands-on C# expertise is required, as well as experience with WPF, Entity Framework, MS SQL Server and Visual Studio. Knowledge of MVVM, dependency injection, and SOLID principles would be expected, but full training can be provided. Any experience of participation in the development and implementation of strategic architectural decisions would also be very useful.
This is an excellent opportunity for a Senior .NET Software Engineer to working within a challenging supportive environment. Top performers can expect to receive their first promotion (and pay rise) within 6 months.
To apply for these positions please send your CV to Nathan Warner at Noir.
Salary: €5k-€6k per month (14 months, so €70k - €84k per annum) + Bonus + Pension + Benefits
Location: Upper Austria (Innviertel region) - Hybrid - once a week in the office
Languages: C1 German & fluent English required
Applicants must have the right to work in Austria.
Noir continues to be the leading Microsoft recruitment agency; we can help you make the right career decisions!
NOIRAUSTRIAREC
NOIREUROPEREC
NOIREURNET....Read more...
This is an exciting and rewarding role for someone with a passion for engineering. Duties include:
Design, Estimating and project management of fire/life safety detection and alarm systems
Take instruction/training from other design team members
Daily use of software including AutoCAD, Bluebeam Revu PDF and other design resources
Providing excellent customer service and communications
Training:3 year apprenticeship scheme 40 hours per week, 830am-530pm based in our head office Coulsdon Surrey. Formal training Construction design and build technician (level 4) weekly day release to East Surrey College, Redhill.
Additional product training shall be provided by the manufacturer's of the specialist product we use.
All business travel and expenses re-imbursed.Training Outcome:
Assistant Design Engineer
Design Engineer
Senior Design Engineer
Design Manager
Employer Description:Lloret Fire Solutions was founded in 2008 specialising in design, supply, installation, commissioning and maintenance of open protocol solutions for all life safety fire requirements.
We have built our reputation by ensuring that we listen to our clients’ requirements & looking after the safety of their people, properties & all aspects of business operation.
We source the correct equipment direct from independent and reputable manufacturers giving us access to the latest technology and direct support.
We are committed to the highest levels of customer service and technical support from initial enquiry through to your project’s completion.
Lloret Fire Solutions are approved by LPCB (Loss Prevention Certification Board) to LPS1014 for the design, installation, commissioning and servicing of our fire detection and alarm systems, using our management system which complies with ISO9001.Working Hours :Monday to Friday (excluding Bank Holidays), 8.30am - 5.30pm.Skills: Communication skills,IT skills,Attention to detail,Problem solving skills,Administrative skills,Logical,Team working,Creative,Initiative,Interest/passion engineering,Maintaining deadlines....Read more...
Assist engineers with inspection, servicing, and repair of powered access equipment (e.g., scissor lifts, boom lifts)
Carry out pre-delivery inspections (PDIs) under supervision
Learn to diagnose faults and perform basic mechanical, hydraulic, and electrical repairs
Support LOLER inspections by preparing equipment and assisting with checks and documentation
Maintain a clean, safe, and organised workshop environment
Complete job sheets, inspection records, and basic reports accurately
Help with loading, unloading, and moving equipment within the depot
Training:
Engineering Operative Level 2
An apprenticeship includes regular training with a college or other training organisation
At least 20% of your working hours will be spent training or studying
Training Outcome:On successful completion of the apprenticeship, there is the opportunity to progress into a qualified engineer role within the company. Further training and development may be available, including manufacturer training, LOLER certification, and progression into senior engineer or mobile engineer roles. The company is committed to developing staff and offering long-term career opportunities for motivated individuals.Employer Description:We are a specialist company providing powered access equipment and related site access solutions to customers across a wide range of industries. Our services include the hire, delivery, inspection, maintenance, and repair of access equipment such as scissor lifts, boom lifts, and other working-at-height machinery. We work closely with our customers to ensure equipment is supplied safely, on time, and in full compliance with health and safety regulations.Working Hours :Monday - Friday.
Under 18: 08:30 to 17:30
Over 18: 08:30 to 18:00 + 1 Saturday/month for 6 hours.Skills: ....Read more...
Senior Electrical Design Engineer Location: Birmingham Type: Full-Time | Hybrid Working The Opportunity A fantastic opportunity for a Senior Electrical Design Engineer to join an established engineering consultancy delivering major commercial, residential, mixed-use and infrastructure schemes across the Midlands and beyond. You'll take ownership of project delivery, build strong client relationships and contribute to the design of sustainable electrical building services solutions across a diverse portfolio. Key ResponsibilitiesLead electrical design projects across multiple sectors.Design and specify power, lighting, emergency systems and associated infrastructure.Manage project programmes and technical quality.Collaborate with clients, architects and design teams.Support business development opportunities where appropriate.Mentor and develop junior engineers.Conduct site inspections and technical reviews.About YouElectrical or Building Services Engineering degree.Proven Building Services consultancy experience.Strong project delivery and client-facing skills.Knowledge of UK regulations and design standards.Experience with Revit, DIALux and Amtech software.Chartered or working towards chartership.What's On OfferHigh-profile regional and national projects.Genuine career progression exible and hybrid working.Competitive salary and comprehensive benefits.Apply Today If you're a Senior Electrical Design Engineer looking to lead impactful projects and advance your career within a leading consultancy environment, we'd love to hear from you.About Energi People Having spent 20 years earning trust across MEP building services, structural and mission-critical engineering with the very best construction engineering firms in the UK, UAE, USA and beyond, we know the disciplines, the best employers, and crucially, the roles that aren’t advertised. Find out more at https://energipeople.com/....Read more...
An exciting opportunity has arisen for a Principal Electronics & Embedded Software Engineer to join a team developing innovative medical and technology products, taking ideas from concept through to manufacture for some of the world's leading companies.
The business has expanded its global capability while maintaining a reputation for exceptional engineering, strong project leadership, and delivery within regulated and safety-critical markets. This role sits within a rapidly growing technical team developing complex electromechanical products from concept through to manufacture.
This position is ideal for an experienced Principal Electronics & Embedded Software Engineer looking to step into a principal-level role, lead multidisciplinary teams, and take ownership of full product architectures while contributing to business growth and client development.
Main Responsibilities of the Principal Electronics & Embedded Software Engineer (Cambridge):
Develop electronics and embedded software(C/C++) for diverse and technically complex new products
Lead the integration of electromechanical product designs through to manufacture and production transfer
Take technical ownership of product architecture from concept generation through to launch
Deliver technical progress to clients and, over time, lead multidisciplinary project teams
Contribute to requirements definition, specification development, schematic capture, PCB layout, hardware bring-up, debugging, and product validation
Support project planning, resourcing, and leadership activities
Build strong client relationships and support the conversion of new opportunities into commercial contracts
Requirements of the Principal Electronics & Embedded Software Engineer(Cambridge):
Proven industry experience designing, prototyping, and testing electronic circuits and systems, including embedded software development in C/C++
Strong practical electronics skills including soldering, PCB rework/modification, wiring, and use of common laboratory test equipment
Experience across the electronic product development lifecycle from concept through to prototype and manufacture
Ability to work effectively within cross-disciplinary teams, with strong written, verbal, and presentation skills
A First or 2:1 degree in Engineering from a leading university (UK top 10 or equivalent)
Eligibility to work in the UK (visa sponsorship not available)
Experience in project planning, leadership, or team coordination would be advantageous
Working Pattern & Benefits:
Full-time, permanent role
Competitive salary and performance-based bonus structure
Career development support including mentoring and personal training budgets
Opportunity to work on innovative, safety-critical products in regulated international markets
Exposure to multinational clients and potential travel opportunities
Ethical working environment focused on improving lives through engineering excellence
To apply please send your CV to mbelmar@redlinegroup.Com, or for more information contact Mike Belmar on 01582 878807.
....Read more...
Test Development Engineer
Location: Colchester, Essex (Hybrid – 3 Days Onsite / 2 Days Remote)
An opportunity has arisen for a Test Development Engineer to join a leading designer and manufacturer of high-performance embedded computing solutions serving aerospace, defence, telecommunications, industrial, transportation and other mission-critical markets.
The organisation develops advanced embedded computing platforms, single board computers, networking products and high-reliability electronic systems used in some of the world's most demanding applications. With continued investment in product innovation and manufacturing capability, the business is experiencing significant growth and expanding its engineering team to support an increasing pipeline of new product introductions.
This is a technically challenging engineering role focused on developing and supporting Automated Test Equipment (ATE) solutions that enable the efficient manufacture of complex embedded computing hardware. Working closely with hardware, software, manufacturing and verification teams, you will influence product testability from the earliest stages of development through to full-scale production.
This role would suit an engineer with experience designing Automated Test Equipment (ATE), developing manufacturing test solutions or supporting production test systems who enjoys solving complex technical challenges within a collaborative engineering environment.
Main Responsibilities of the Test Development Engineer (Colchester):
Define Design for Testability (DfT) requirements during new product development and PCB design reviews
Develop and maintain Automated Test Equipment (ATE) requirements for new embedded hardware platforms
Design and specify ATE hardware including fixtures, interface test adapters (ITAs), harnesses, switching systems and interface electronics
Work closely with software engineers to develop automated production test sequences and diagnostic routines
Support New Product Introduction (NPI), pilot builds and transition into volume manufacturing
Validate and qualify production test systems prior to manufacturing release
Troubleshoot production test failures and carry out root cause investigations
Drive improvements in manufacturing yield, throughput and overall test efficiency
Produce and maintain technical documentation including test procedures, schematics, maintenance guides and interface documentation
Support ongoing maintenance, calibration and continuous improvement of deployed ATE systems
Collaborate with hardware, firmware, software, manufacturing and quality teams to optimise product test strategies
Support production growth through scalable, high-performance automated test solutions
Requirements of the Test Development Engineer (Colchester):
Proven experience developing or supporting Automated Test Equipment (ATE) within an electronics manufacturing environment
Strong understanding of electronic hardware including analogue and digital circuits, power systems and high-speed interfaces
Experience designing production test systems for complex electronic assemblies or embedded computing products
Knowledge of Design for Testability (DfT), Built-In Self-Test (BIST) and diagnostic methodologies
Experience working with oscilloscopes, programmable power supplies, switching hardware and electronic test instrumentation
Strong fault-finding and root cause analysis skills
Experience working closely with software engineers to develop integrated hardware and software test solutions
Excellent technical documentation and requirements capture skills
Ability to work collaboratively across multidisciplinary engineering teams
Experience within one or more of the following technologies would be advantageous:
Embedded computing systems
Single Board Computers (SBCs)
VPX, VME or CompactPCI architectures
Automated Test Equipment (ATE)
PCB and multilayer board design
Manufacturing and production test systems
Functional test and environmental testing
High-reliability electronics
Defence electronics
Aerospace electronics
Industrial computing platforms
Desirable:
Experience within aerospace, defence, telecommunications or industrial electronics sectors
Knowledge of SMT manufacturing, PCB assembly and functional test processes
Experience improving manufacturing yield and production throughput
Ability to design custom electronics for test fixtures and adapters
Experience supporting qualification and environmental testing programmes
Understanding of manufacturing process optimisation and production scalability
Working Pattern & Benefits:
Hybrid working — 3 days onsite in Colchester and 2 days remote
Opportunity to work on technically advanced embedded computing platforms used in mission-critical applications
Join a rapidly growing engineering organisation with significant investment in new product development
Work across the full product lifecycle from concept through to production
Annual company profit share bonus
Private healthcare
Company pension with up to 10% employer contribution
25 days annual leave plus bank holidays and holiday purchase scheme
Life assurance and income protection
Enhanced parental leave
Cycle to Work and salary sacrifice schemes
Employee Assistance Programme and virtual GP
Excellent long-term technical and career development opportunities
To apply for this Test Development Engineer role, please send your CV to Kishan Chandarana: kchandarana@redlinegroup.Com....Read more...
Principal / Associate Civil EngineerLocation:
Central London
Salary: £50,000 £70,000
An exciting opportunity has arisen for a Principal Civil Engineer or Associate Civil Engineer to lead the growth of a developing Civil Engineering team within a successful engineering consultancy.
The Role
- Lead the delivery of highways, drainage and infrastructure design projects.
- Manage residential, commercial and mixed-use development schemes.
- Prepare and review Section 38, Section 278 and Section 104 designs.
- Deliver SuDS, flood risk and drainage strategies>
- Build, mentor and develop a growing team of Civil Engineers and Technicians.
About You
- Proven UK consultancy experience.
- Strong background in:
- Highways Design
- Drainage Design
- Infrastructure Design
- Residential & Commercial Developments
- SuDS & Flood Risk
- Section 38, Section 278 & Section 104 Agreements
- Proficient in Civil 3D, AutoCAD and InfoDrainage/MicroDrainage.
- Previous experience mentoring or managing engineers.
What\'s On Offer?
- Opportunity to build and shape a Civil Engineering team.
- Genuine progression to senior leadership.
Ready to apply?
If this sounds like the right move for you then get in touch for a confidential conversation....Read more...
Senior Mechanical Design Engineer |Bournemouth
Location: Bournemouth, Dorset
Salary: Competitive + Excellent Benefits
Are you an experienced Mechanical Design Engineer looking to work on innovative mechanical and electromechanical products used across industries including healthcare, mobility, transport, leisure and industrial automation? Are you looking to take the next step in your career?
An established UK engineering and manufacturing business is looking to recruit a talented Senior Mechanical Design Engineer to join its Product Development team. This is an exciting opportunity to take ownership of new product development projects from concept through to production, while working with a collaborative team in a technically advanced manufacturing environment.
The Role as Mechanical Design Engineer based in Bournemouth
Reporting to the Head of Innovation, you will play a key role in designing and developing new products, improving existing designs, supporting new product introduction (NPI) and ensuring products meet customer requirements, engineering standards and manufacturing objectives.
You will also act as the technical lead for key customer projects, collaborating with cross-functional teams to deliver innovative engineering solutions.
Key Responsibilities for the Senior Mechanical Design job in Bournemouth
Lead the technical development of new customer and product roadmap projects.
Design and develop mechanical and electromechanical products from concept through to production.
Create 3D CAD models, engineering drawings and technical documentation using SolidWorks.
Produce supporting engineering documentation including product specifications, validation plans and compliance documentation.
Optimise existing products to improve performance, reliability, manufacturability and cost.
Conduct engineering calculations and simulations to validate designs.
Work closely with Manufacturing, Production Engineering, Quality, Purchasing, Testing and Project Management teams during product development.
Raise and manage Engineering Change Requests (ECRs).
Support prototype builds, testing and production handover.
Review concessions and first-off approvals.
Ensure designs comply with relevant engineering standards and regulatory requirements.
Mentor and support less experienced engineers where appropriate.
About You
Essential Skills & Experience
Degree qualified in Mechanical Engineering, Electromechanical Engineering or equivalent industry experience.
Proven experience in mechanical product design and development.
Strong SolidWorks CAD experience.
Experience of manufacturing processes including castings, machined components and moulded parts.
Knowledge of Design for Manufacture (DFM) and Design for Assembly (DFA).
Experience with APQP, PPAP and Design & Process FMEA.
Understanding of manufacturing ERP systems such as SAP, IFS, Priority or similar.
Excellent problem-solving and analytical skills.
Strong project management and organisational abilities.
Ability to manage multiple engineering projects simultaneously.
Excellent communication skills with the ability to work across multidisciplinary teams.
Desirable Skills
Knowledge of electric motors, gearboxes, drivetrains or rotating machinery.
PCB design experience.
Understanding of CE, UKCA, UL, EMC and IP approvals.
SolidWorks EPDM experience.
Knowledge of KissSoft Gear Design software.
Experience with MotorSolve software.
Lean Manufacturing and Continuous Improvement experience.
Why Apply?
This is an excellent opportunity to join an innovative engineering manufacturer that designs and develops high-quality products supplied to customers around the world.
You'll benefit from:
Working on technically challenging engineering projects
Ownership of projects from concept through to production
Modern engineering and manufacturing facilities
Career development and progression opportunities
Collaborative and supportive engineering culture
Competitive salary and comprehensive benefits package
Apply Today
If you are an experienced Mechanical design Engineer, looking for a step into a Senior position, in Bournemouth, we'd love to hear from you. Please send you cv over to nking@redlinegroup.Com or call 01582878839 for more information.....Read more...
Field Sales Engineer
Location: Central & Eastern England – Field Based (Regular UK Travel)
An exciting opportunity has arisen for a Field Sales Engineer to join a specialist engineering organisation developing and supplying advanced RF, microwave and electronic technology solutions into defence, aerospace, telecommunications, satellite communications and other high-performance industries.
The company designs and delivers technically complex RF and microwave solutions for customers operating in mission-critical environments, working closely with OEMs, system integrators and engineering teams to solve challenging technical applications. With continued investment in innovation and customer support, the business is looking to strengthen its commercial team with an experienced technical sales professional.
This is a customer-facing role combining technical expertise with commercial responsibility. The successful candidate will be responsible for developing new business opportunities, managing key customer accounts and supporting customers throughout the complete sales lifecycle. Working closely with engineering, operations and commercial teams, you will provide technical guidance, develop tailored solutions and help drive continued business growth across strategically important markets.
This role would suit a technically minded sales professional with experience of RF, microwave, electronics or communications technologies who enjoys developing long-term customer relationships and identifying new commercial opportunities.
Main Responsibilities of the Field Sales Engineer (Central & Eastern England):
Identify and develop new business opportunities across defence, aerospace, telecommunications, satellite communications and advanced electronics markets
Build and maintain strong relationships with OEMs, engineering teams, procurement departments and strategic customer accounts
Conduct customer meetings, technical presentations, product demonstrations and site visits throughout the region
Understand customer technical requirements and recommend suitable RF and microwave solutions
Prepare quotations, proposals and support commercial negotiations to secure profitable business opportunities
Work closely with engineering teams to support solution development and technical feasibility assessments
Manage customers throughout the complete sales lifecycle from initial enquiry through to project delivery
Maintain accurate CRM records including pipeline activity, forecasts and customer interactions
Monitor competitor activity, market trends and emerging RF and microwave technologies
Attend industry exhibitions, networking events and customer meetings to promote the company's capabilities
Deliver agreed sales targets and contribute to wider commercial growth objectives
Provide customer and market feedback to support future product development and business strategy
Ensure compliance with export control regulations, confidentiality requirements and relevant industry standards
Requirements of the Field Sales Engineer (Central & Eastern England):
Proven experience within technical sales, field sales engineering or engineering sales
Background within RF, microwave, electronics, telecommunications or closely related engineering sectors
Strong understanding of RF and microwave technologies, electronic systems or electronic components
Ability to understand technical customer requirements and translate these into commercial solutions
Excellent communication and relationship-building skills with engineering, procurement and commercial stakeholders
Experience delivering technical presentations and supporting customer solution development
Commercially driven with the ability to identify, develop and convert new business opportunities
Strong customer account management skills with the ability to build long-term partnerships
Experience using CRM systems to manage sales pipelines and forecasting
Self-motivated with the ability to work independently in a field-based environment
Full UK Driving Licence and willingness to travel regularly across Central and Eastern England, with occasional international travel
Desirable:
Experience selling RF and microwave systems, antenna technologies or specialist electronic products
Experience working within defence, aerospace, satellite communications or advanced electronics industries
Knowledge of engineering drawings, technical specifications and product development processes
Understanding of export control requirements and regulated engineering markets
Experience supporting technically complex, high-value engineering projects
To apply for this Field Sales Engineer opportunity, please send your CV to Kishan Chandarana at Redline Group.
Kchandarana@redlinegroup.Com....Read more...
Learning many aspects of providing support to customers, including helping users who have technical issues or need help with supporting applications
Dealing with alerts and automated system monitoring
Ensure that all systems and services are proactively maintained, monitored and supported to ensure that we are meeting set SLA's
Monitor the Service Desk email inbox to respond to support calls logged via email
Answer telephone and complete support issues from initial contact to resolution. Log all calls in the relevant Call Logging system
Provide 1st and 2nd line support on calls assigned by a service desk team member or other Support Engineer
Escalate incidents when required to 3rd parties, external resources, or others
Investigate, diagnose and troubleshoot a wide variety of problems with network and computer hardware, device drivers, operating systems and application server software
Write up support calls and maintain documents and records to a professional standard; for example, Request for Change (RFC's),
Customer Build Logs and Tech Docs
Attend the site and carry out any on-site support work as required
Provide excellent customer service by understanding the business drivers, taking proactive action and providing clear communication
Training:QA’s Cloud Network Specialist Level 3 apprenticeship programme enables the apprentice to:
Follow a cloud-first curriculum, covering on-premise and cloud-enabled networking
Learn about core networking principles, including network addressing, cloud, virtualisation and security
Understand the principles, hardware, protocols and services that form part of on-premise, cloud and hybrid network architectures
Train with QA – the largest and leading provider for both Microsoft and AWS training
Learn technical content that aligns to, and is relevant to, employers and the market
Learn about DevOps methodologies and the fundamentals of databases and data migration
Tools and technologies learned: Learners will learn to use Microsoft Azure, AWS and Google Cloud.Training Outcome:Guaranteed job opportunity once completing the apprenticeship and qualifying. Many apprentices move into roles such as:
IT Support Engineer
Cloud Engineer
Infrastructure Engineer
Cyber Security Analyst
Technical Consultant
Employer Description:As a small company, we provide closer access to experienced engineers and leaders. Apprentices can benefit from a wider variety of responsibilities and more visibility within the business. The company focuses on Microsoft technologies and often supports staff in gaining Microsoft certifications.
Our culture is built around learning, collaboration and opportunity. We want apprentices to feel supported from day one, develop valuable technical and professional skills, and build a long-term career in a fast-growing technology business.Working Hours :Monday to Friday, 9am - 5:30pmSkills: Problem solving skills,Logical,Team working,Patience and empathy,Friendly and approachable....Read more...
Electrical Maintenance Supervisor – FM Service Provider – Fenchurch Street, London – £55,000 per annum CBW is currently recruiting for an experienced Electrical Maintenance Supervisor to join a landlord-managed commercial office building in Fenchurch Street. This is an excellent opportunity for a technically strong and hands-on Supervisor to take responsibility for the day-to-day engineering operations of a well-maintained multi-let commercial property. Working directly on behalf of the building ownership, you will oversee one on-site Maintenance Engineer, coordinate specialist subcontractors, and ensure the safe, efficient, and compliant delivery of planned preventative maintenance (PPM), reactive maintenance, statutory compliance, and minor project works across the building. We are seeking an individual with a strong electrical building services background who enjoys leading from the front, maintaining high engineering standards, and building positive relationships with occupiers, contractors, and stakeholders. What You'll Be DoingSupervise and support one on-site Maintenance Engineer, providing technical guidance and day-to-day leadership.Manage the delivery of planned preventative maintenance (PPM) and reactive maintenance across the building, ensuring all tasks are completed safely and efficiently.Remain hands-on where required, carrying out fault finding, repairs, and general building services maintenance.Coordinate and oversee specialist subcontractors, ensuring works are completed to the required quality, safety, and compliance standards.Ensure statutory compliance through the completion and review of maintenance records, plant logbooks, and site documentation.Monitor health & safety standards, ensuring all work is carried out in accordance with company procedures, risk assessments, and permit-to-work systems.Support the operation and reliability of all mechanical and electrical building services, responding promptly to plant faults and operational issues.Liaise with the landlord's representatives, occupiers, and contractors to ensure excellent communication and a high standard of customer service.Assist with minor works, quotations, and lifecycle maintenance planning to ensure the building is maintained to a high standard.Ensure KPIs, SLAs, and contractual obligations are consistently achieved while maintaining a professional and proactive approach to service delivery.Hours of work: 08:00am - 17:00pm What We're Looking ForLevel 3 qualification in Electrical Engineering (or equivalent recognised qualification).Previous experience in a Supervisory, Lead Engineer, or Senior Engineer role within a commercial Facilities Management environment.Strong electrical building services knowledge, with a good understanding of mechanical systems and statutory compliance.Experience supervising engineers and coordinating specialist subcontractors.Confident in fault finding, planned preventative maintenance (PPM), and reactive maintenance within occupied commercial buildings.Good understanding of health & safety legislation, permit-to-work systems, and safe systems of work.Excellent communication and organisational skills, with the ability to build positive relationships with clients, occupiers, and contractors.A proactive, hands-on approach with the ability to lead by example and deliver a high standard of engineering service.Please send your CV to Katie at CBW Staffing Solutions for more information.....Read more...
Mobile Chiller Engineer - FM service provider - London & M25 - Paying Up to £60,000 + Package CBW Staffing Solutions are currently recruiting for a Mobile Chiller Engineer to work on behalf of an Air Conditioning & Refrigeration company based in SE London/Kent. The successful candidate will be a fully qualified Chiller Engineer with NVQ Level 2/3 in Refrigeration & Air Conditioning, F-Gas Category, City & Guilds 2079, or equivalent and a have strong understanding in the installation, maintenance, and repair of commercial and industrial chiller systems. As the Chiller Engineer you will be required to attend a number of commercial sites, Universities, Hospitals and offices covering London & SE, where you will carry out PPM on diverse chiller systems, including air-cooled, water-cooled, absorption, and adiabatic chillers, to ensure optimal performance and longevity. You will be self-motivated, technically proficient, customer-focused, and possess excellent problem-solving abilities. In return the company is offering a competitive salary of up to £60,000, overtime, further training and a potential route into further career progression. Hours of work Monday to Friday - 08:00am to 17:00pm Key ResponsibilitiesPreventative Maintenance (PPM): Conduct routine preventative maintenance on diverse chiller systems, including air-cooled, water-cooled, absorption, and adiabatic chillers, to ensure optimal performance and longevity.Diagnose complex mechanical, electrical, and refrigeration faults efficiently and accurately, performing effective repairs on components such as compressors, condensers, evaporators, control systems, pumps, and pipework.Carry out F-Gas leak detection, recovery, and recharging in strict compliance with current F-Gas regulations and environmental standards.Proactively identify opportunities for system optimization and efficiency improvements, advising clients on best practices and potential upgrades.Liaise professionally and directly with clients, providing clear explanations of work carried out, identifying any further required works, and building strong working relationships.Complete accurate service reports, timesheets, expense submissions, and other administrative tasks promptly and efficiently, utilizing mobile technology.Adhere strictly to all company and site-specific health and safety regulations, including risk assessments and method statements.Participate in an out-of-hours on-call rota for emergency breakdowns as required which is currently every 14 weeks.Provide technical guidance and support to junior technicians or apprentices when appropriate. In return, my client is offering a very competitive package including:25 days holiday + Bank HolidaysVan & Fuel Card providedTravel time: 1 hour each wayTablet & Work phone providedFull company uniformLots of overtime availableQualifications & ExperienceNVQ Level 2/3 in Refrigeration & Air Conditioning, City & Guilds 2079, or equivalentCurrent F-Gas Category 1 certification (Essential).Strong track record of working on various commercial and industrial chiller manufacturers.Full, clean UK Driving Licence (Essential)Strong understanding of refrigeration cycles, thermodynamics, electrical control systems, and HVAC principles.Proven ability to read and interpret electrical schematics, wiring diagrams, and technical drawings to diagnose faults.....Read more...
Industrial Electrician
Birmingham £40,000 - £42,000 Basic + Door-to-Door Pay + Overtime at 1.5x + £55,000+ OTE + Company Van + Training + Progression + Benefits
Earn £55,000+ while working on a wide variety of commercial electrical, renewable energy and specialist infrastructure projects. This is an excellent opportunity for an Industrial Electrician who wants door-to-door pay, regular overtime and varied technical work rather than carrying out the same installations every day.
This established company provides installation, service and maintenance support across essential fuel, energy and infrastructure systems. Following significant growth and several recent acquisitions, they are looking for an Industrial Electrician to help expand their electrical division and support new contracts across the UK.
The successful Industrial Electrician will receive ongoing technical development, opportunities to progress and the chance to work across commercial electrical systems, battery storage, renewables and specialist installations.
Your Role as an Industrial Electrician Will Include:
Commercial electrical installation, servicing and maintenance
Inspection, testing and electrical fault finding
Supporting battery storage, solar and specialist infrastructure installations
Travelling to customer sites with door-to-door pay
Working a 40-hour week with regular overtime available
The Successful Industrial Electrician Will Need:
NVQ Level 3 Electrical qualification
2391 Inspection and Testing qualification
Experience across varied commercial installation and maintenance work
Full UK driving licence
If this sounds like you, apply or call Liam on 020 3411 4199 for IMMEDIATE CONSIDERATION.
Keywords: Industrial Electrician, Electrical Engineer, Maintenance, Installation, Inspection and Testing, 2391, CompEx, AM2, Solar, Battery Storage, Renewable Energy, Infrastructure, Service Engineer, Field Service Engineer, Technician
Please visit our website at futureengineer.co.uk to view other positions we are currently handling.
Future Engineering Recruitment Ltd can only accept applications from candidates with a valid legal permit or right to work in the United Kingdom. Candidates who do not have this right, or are awaiting approval, should not apply.....Read more...
Graduate Engineer
Hayes, England
£36,000 - £38,000 + Travel Allowance + Stay away + Career Progression + Training + Holidays + Immediate Start
Are you a recent Engineering graduate ready to launch your career with a global leader in technical construction? Join a renowned main contractor working on multiple €100M+ projects across the UK and Europe. This is a unique opportunity to step into a role where no two days are the same. You'll be learning hands-on from some of the most experienced professionals in the industry, gaining exposure to multiple project stages and developing a well-rounded skill set. You will be working on a new and exciting data centre project in Frankfurt. As a major part of your role, you will take over control of the Process Systems and play a key part in coordinating activities between stakeholders, acting as a Coordinator on site to ensure smooth delivery across various phases of the project. This company is a world leader in delivering high-tech construction solutions across sectors such as data centres and mission-critical facilities. With a strong global presence, there are exciting opportunities for travel-both across the UK and internationally-once this project is completed. This role offers a structured path for rapid career progression, setting you firmly on course toward senior leadership roles such as Senior Project Manager and Project Director. As A Graduate Engineer, You Will Have:
A Degree within Civil , mechanical or electrical Engineering
Proactive mindset - Learn from leaders in the industry and be prepared to be working hard!
Drivers licence
EU Passport or right to work in Germany
Your Role As A Graduate Engineer Will Include:
Site based 5 x a week (Mon - Fri) on a construction project
Undertaking works within various high-tech construction projects
Training and progression pathways onto senior roles
Apply now to be part of a fast-growing, global team shaping the future of mission-critical engineering.....Read more...
Graduate Engineer London, England
£36,000 - £38,000 + Travel Allowance + Stay away + Career Progression + Training + Holidays + Immediate Start
Are you a recent Engineering graduate ready to launch your career with a global leader in technical construction? Join a renowned main contractor working on multiple €100M+ projects across the UK and Europe. This is a unique opportunity to step into a role where no two days are the same. You'll be learning hands-on from some of the most experienced professionals in the industry, gaining exposure to multiple project stages and developing a well-rounded skill set. You will be working on a new and exciting data centre project in Frankfurt. As a major part of your role, you will take over control of the Process Systems and play a key part in coordinating activities between stakeholders, acting as a Coordinator on site to ensure smooth delivery across various phases of the project. This company is a world leader in delivering high-tech construction solutions across sectors such as data centres and mission-critical facilities. With a strong global presence, there are exciting opportunities for travel-both across the UK and internationally-once this project is completed. This role offers a structured path for rapid career progression, setting you firmly on course toward senior leadership roles such as Senior Project Manager and Project Director. As A Graduate Engineer, You Will Have:
A Degree within Civil , mechanical or electrical Engineering
Proactive mindset - Learn from leaders in the industry and be prepared to be working hard!
Drivers licence
EU Passport or right to work in Germany
Your Role As A Graduate Engineer Will Include:
Site based 5 x a week (Mon - Fri) on a construction project
Undertaking works within various high-tech construction projects
Training and progression pathways onto senior roles
Apply now to be part of a fast-growing, global team shaping the future of mission-critical engineering.....Read more...
Product Design Mechanical Engineer – Medical Device – Warwick
A growing Medical Devices company, located in Warwick, is currently seeking an experienced Product Design Mechanical Engineer to contribute to the development of various Medical Devices.
As part of a team of engineering experts, including physicists, electronics engineers, scientists, and other specialists in Medical Devices, you will play a pivotal role in working on a range of projects aimed at creating life-saving and life-improving Medical Devices.
We are specifically looking for candidates with experience in Medical Devices, preferably in the areas of product design and product development. However, individuals from the life sciences sector with experience working under strict regulations will also be considered.
The ideal candidate would have a few years of industry experience and might be seeking their second role to advance their career. While a relevant degree in Mechanical Engineering or a related field is preferred, it is not essential if you have substantial experience as a Mechanical Design Engineer in the Medical Devices sector.
In return for your contributions, you will receive a competitive salary, regular salary reviews, bonuses, a pension plan, life assurance, and other outstanding benefits typically associated with larger organizations.
This is a fantastic opportunity to join a growing company that places a strong emphasis on staff development and career advancement. Due to the anticipated high level of interest, we encourage interested candidates to apply promptly to avoid missing out.
For further information, please feel free to contact Andrew Welsh, Director of Medical Devices Recruitment and Scientific Recruitment Specialist at Newton Colmore, on +44 121 268 2240. Alternatively, you can submit an application, and a member of our team at Newton Colmore will reach out to you.
Newton Colmore Consulting specializes in recruiting within the Medical Devices, Scientific Engineering, Scientific Software, Robotics, Science, Electronics Design, New Product Design, Human Factors, Regulatory Affairs, Quality Assurance, and Field Service Engineering sectors.....Read more...
