Electronics Design Engineer (Analogue, Power Electronics, SMPS)
Normanton, West Yorkshire, United Kingdom | Full-Time, Permanent |
About the Role
We are seeking a highly skilled Principal Electronics Design Engineer to join a growing engineering team in Normanton, West Yorkshire. This is an exciting opportunity for an experienced Electronics Design Engineer with expertise in analogue electronics, power systems, and switch-mode power supplies (SMPS), to play a leading role in delivering innovative electronic solutions.
Reporting to the Normanton Site Technical Lead, you will provide technical leadership, mentor engineers, and drive the development of advanced systems across power electronics, LED lighting, and embedded control technologies.
Key Responsibilities
Lead the design and development of analogue electronics, power systems, and SMPS (buck, boost, flyback)
Design and optimise LED lighting control systems and power management solutions
Provide technical leadership and mentorship to a team of electronics engineers
Oversee integration of control systems, HMI, and embedded electronics into products
Collaborate with cross-functional teams across hardware, software, and systems engineering
Troubleshoot complex issues related to power conversion, EMC, and thermal performance
Ensure designs meet regulatory standards, safety requirements, and customer specifications
Create and review technical documentation including schematics, PCB layouts, and test procedures
Drive continuous improvement and engineering best practices
Research and evaluate emerging electronic technologies and innovations
Key Skills & Experience
Extensive experience in analogue electronics and power electronics design
Strong expertise in switch-mode power supplies (SMPS) and power conversion circuits
Broad knowledge of electronic circuit design and system-level integration
Experience leading and mentoring engineering teams
Proficiency with design and simulation tools such as SPICE, MATLAB, Altium Designer
Solid understanding of EMC compliance, thermal management, and safety standards
Strong hands-on problem-solving and troubleshooting skills
Excellent communication, leadership, and stakeholder engagement abilities
Desirable Experience
Experience with LED lighting systems and control electronics
Knowledge of embedded systems and mixed-signal design
Exposure to HMI (Human Machine Interface) development
Experience in product development within regulated industries
If you are keen and would like to find out more information on this Electronics Design Engineer position, please send an updated cv over to nking@redlinegroup.Com or call 01582 878839 for more details.....Read more...
Our client has an opportunity for a Hardware Engineer. Main duties are transferring of new hardware products from the initial design to mass production. The candidate must be inquisitive and driven to strive for excellence in manufacturing.
Key Responsibilities
Support the Hardware Realisation Engineer in the development of test processes, training, and manufacturing transfer to Production.
Work with the design engineers to ensure new products are manufacturable with consideration to Design for Test, Design for Manufacturing, Design for Assembly.
Support the development and implementation of automated testing for production and our external manufacturing partners.
Essential skills
Key requirements are an aptitude for electronics manufacturing, enthusiasm for efficiency, and desire to make process improvements.
Suitable candidates will be ideally educated to a degree level in Electronic Engineering (or equivalent)
Previous experience in electronic PCB manufacture, designing circuits, soldering, and Arduino development would be advantageous.....Read more...
Our client has an opportunity for a Hardware Engineer. Main duties are transferring of new hardware products from the initial design to mass production. The candidate must be inquisitive and driven to strive for excellence in manufacturing.
Key Responsibilities
Support the Hardware Realisation Engineer in the development of test processes, training, and manufacturing transfer to Production.
Work with the design engineers to ensure new products are manufacturable with consideration to Design for Test, Design for Manufacturing, Design for Assembly.
Support the development and implementation of automated testing for production and our external manufacturing partners.
Essential skills
Key requirements are an aptitude for electronics manufacturing, enthusiasm for efficiency, and desire to make process improvements.
Suitable candidates will be ideally educated to a degree level in Electronic Engineering (or equivalent)
Previous experience in electronic PCB manufacture, designing circuits, soldering, and Arduino development would be advantageous.....Read more...
Audio Visual Field Service Engineer (residential) - I am now looking for an audio visual experienced residential service engineer with either a good residential audio visual background (4 years) to take on av projects and systems that have been integrated into millionaires and billionaires homes, apartments, penthouses, yachts and beyond. This role is with a residential home automation company who have consistently delivered to the highest standards. This role will be a mix of remote technical support / on occasion further afield overseas to be hands on with av systems. I will need to see from you a technical CV that covers the following:• Crestron Control• Lutron lighting Service / Integration / Programming• IT home networks / Cisco (set up / configuration). Wyrestorm• Screen / Projector Lifts• Multi-room Audio, home cinema• Audio Visual Racks, smarthome love and appreciation• Client facing / remote technical support, overseas travel• Extremely technical and an excellent head for fault finding• Digital Media Systems
If you have this defined skill set and you are extremely client facing then please send me your full technical CV with all kit and hands on skills clearly shown.NO SPONSORSHIP IS ON OFFER YOU MUST BE IN THE UK AND BE WORKING LEGALLY ALL INFORMATION MUST BE IN THE CV NOT IN A COVERING LETTERAUDIO VISUAL AV A/V A-V AUDIO/VISUAL AUDIO-VISUAL FIELD SERVICE ENGINEER CRESTRON SOUND LUTRON RESIDENTIAL CEDIA SMARTHOME KNX WYRESTORM AUTOMATION INTEGRATION INSTALLATION RACK LONDON SURREY BERKS BERKSHIRE BUCKS BUCKINGHAMSHIRE HERTS HERTFORDSHIRE MIDDX MIDDLESEX....Read more...
An exciting opportunity has arisen for a System Engineer to join a cutting-edge team developing advanced Cyber and Information Assurance (IA) products. This role offers the chance to work across multiple development projects, applying innovative engineering solutions to complex, real-world problems.
What Youll Do
- Take technical ownership of system engineering activities across one or more IA product developments.
- Collaborate closely with hardware, software, FPGA and mechanical teams to define and deliver coherent technical solutions.
- Engage in requirements engineering, capturing, analysing and refining requirements across all design disciplines.
- Contribute throughout the full product lifecycle, from initial concept and architecture through to development, verification, and customer delivery.
- Support bid proposals and provide technical input to customer discussions to ensure solutions meet end-user needs.
What Were Looking For
- Degree in a relevant engineering discipline and 5+ years industry experience in systems engineering or a related field.
- Strong understanding of the systems engineering lifecycle, including requirements management, architecture, and product validation/verification.
- Broad technical awareness across multiple engineering disciplines, with expertise in at least one area.
- Ability to produce clear, concise technical documentation and communicate effectively with cross-functional teams.
- Experience using DOORS or similar tools for requirements management is an advantage.
- Must hold sole British nationality and be eligible for UK Security Clearance (SC).
Desirable Skills
- Knowledge of system design languages (UML, SysML) and techniques such as use-case analysis or trade studies.
- Experience preparing technical estimates for bids.
- Familiarity with mechanical and environmental qualification processes.
This is a fantastic opportunity for an experienced System Engineer, or an electronics/software engineer looking to broaden their scope, to play a key role in the design of unique, high-assurance products used in critical national security applications. Youll work with an innovative team tackling challenging technical problems and shaping solutions from concept to delivery.
TT....Read more...
Exciting opportunity to work as an EC&I Engineer for a multi-billion-pound market-leading company, offering a competitive salary of up to £44,900 plus an attractive benefits package, including annual bonus, enhanced pension, private medical insurance, life assurance, cycle scheme, and more. Progression is a genuine opportunity with this company given their ambitious but stable growth and ongoing investment strategy.As the EC&I Engineer you will be responsible for supporting reliability and plant integrity across an Upper Tier COMAH site. You will play a key role in ensuring compliance with related regulations, while focusing on continuous improvement, fault finding, and maintaining safe and efficient operations.Responsibilities
Ensure compliance with safety standards for all systems, supporting plant integrity through inspections, preventative maintenance, and best practice.
Support RCA failures, driving corrective and preventative actions, assisting with breakdown response, and helping to deliver sustainable solutions.
Support site reliability by identifying and implementing improvement opportunities aligned with maintenance and engineering strategy.
Assist in managing spares and supply chain to minimise downtime risk and ensure critical equipment availability.
Support small-scale CAPEX projects, planning, and coordination with contractors and internal stakeholders.
Utilise SAP to analyse maintenance data, track asset performance, and contribute to long-term maintenance and reliability planning.
Requirements
Hold a HNC/HND or Degree in Electrical, EC&I, Controls and Instrumentation, or a related subject (essential).
Possess a solid understanding of control systems, instrumentation, and electrical systems.
Have experience with SAP and familiarity with reliability tools such as RCA or FMEA (advantageous).
Please apply directly for this EC&I Engineer role or contact Sean Turner for further details regarding this opportunity. ....Read more...
Electrical Maintenance Engineer - Marble Arch, Central London - Up to £47,000 I have a fantastic opportunities to work for a large maintenance company working in the Marble Arch, Central London working at a corporate commercial office buildings on behalf of a large property management company. You will carry out PPM and reactive maintenance, statutory compliance and general building maintenance tasks. My client is looking for a Multi-skilled Electrical Maintenance Engineer with experience in building services to work on a High profile corporate office based in Marble Arch, Central London. HoursMonday to Friday - 8am to 5pmRequirementsApprentice TrainedElectrical - City & Guilds Level 2 and 3 or Equivalent17th / 18th Edition Client FacingCommercial Building Maintenance ExperiencePackageBasic Salary of £47,00024 Days Annual leave PensionHealthcarePlenty of OTInternal and External Training courses Career progression - would want the engineer to develop into supervisors and above.Duties Electrical PPM's and Reactive maintenanceGeneral building services tasksEmergency lighting, Fire alarms, FCU's, AHU's, HVAC plant, Water treatmentLandlord and Tenanted areas of a large blue chip companies and banks across a large estateWorking as part of a small maintenance team to deliver a great service to the clientMy client is able to interview straight away if the right candidates are available so to avoid missing out please send your CV today to Dan Barber at CBW Staffing Solutions....Read more...
Mobile Multi Skilled Engineer - Commercial Building - Hampshire - Immediate start - £19.48 per hour CBW is currently recruiting an Electrical or Mechanical Maintenance Engineer to be based in a commercial estate located in Hampshire. The successful candidate will be a fully qualified Electrical or Mechanical Maintenance Engineer with a proven track record in commercial/property building maintenance. They will be required to carry out M&E planned and reactive maintenance. Hours/Details:Monday to Friday08:00am to 17:00pmContract type: Ongoing contractVehicle + fuel cardKey duties & Responsibilities:Lighting (Small installation, Fault-finding, Lamping, Changing ballast's, Control panel, Power distribution)Emergency lightingAir Conditioning - Air Handling Units / Fan Coil Unit (Filter changes, cleaning)Chillers - Re-setWater Treatment (Temperature checks / Not dosing)Plumbing - Unblocking toiletsBMS System - Monitor (i.e. Hot & Colds)UPS Systems - Monitor / Take readingsGeneral building fabricMonitor mechanical plantPumps, Motors, Seals, Bearings Requirements:Electrically or mechanically qualified - You must be able to provide copies of your trade certificatesCity & Guilds/NVQ Level 2&3City & Guilds - 17th or 18th Edition if electrically biasA proven track record in commercial or property maintenanceInstallation experienceExcellent customer service skillHonest, hard-working and reliableUK driving lisence neededFor more information or to apply please email your updated CV to Jordyn@cbwstaffingsolutions.com....Read more...
Precision Manufacturing facility Maintenance Engineer required to support precision cleanroom vacuum, pneumatic, mechanical, electrical, and RF system equipment that require hazardous gases and chemicals.
The roles will focus on fault diagnosis, repair, and optimisation of advanced clean environment production and processing tools. You will be a hands on, high precision engineer with experience maintaining complex electro mechanical systems in critical environments including high tech manufacturing, aerospace, defence, or UK Armed Forces technical trades.
Requirements
Complex electro mechanical system maintenance commercial experience.
Fault finding and diagnostic experience of electrical, electronic and mechanical systems.
Aerospace, Semiconductor, Automotive, Pharmaceuticals, Defence or other high reliability, process driven industry experience.
Cleanroom manufacturing knowledge.
Responsibilities
Respond to engineering facility equipment issues during shift operations on a continental shift pattern.
Repair, fault diagnose, and perform preventative maintenance on precision manufacturing and processing equipment.
Fork lift truck operation as needed, training will be provided.....Read more...
Leading company of electrical equipment are seeking a highly skilled Calibration Engineer to join their dedicated team. As a Calibration Engineer will ensure the accuracy and reliability of electrical and electronic instruments through meticulous calibration procedures. You will work closely with service team to provide comprehensive repair and calibration services, both in our environmentally-controlled laboratory and on-site at client locations.
Responsibilities
Perform calibration and testing of AC and DC power equipment, metering test equipment, and general purpose test and measurement instruments.
Conduct on-site visits for equipment repairs and calibration as part of our field service capability.
Maintain accurate records of calibration activities and ensure traceability to national standards.
Requirements
Bachelor's degree in Electrical Engineering, Electronics, or related field.
Proven experience in calibration, preferably in a UKAS-accredited laboratory environment.
Strong knowledge of AC power and energy measurements, with proficiency in calibration techniques.
Familiarity with electrical test equipment and standards, including power sources and electronic instruments.....Read more...
Leading company of electrical equipment are seeking a highly skilled Calibration Engineer to join their dedicated team. As a Calibration Engineer will ensure the accuracy and reliability of electrical and electronic instruments through meticulous calibration procedures. You will work closely with service team to provide comprehensive repair and calibration services, both in our environmentally-controlled laboratory and on-site at client locations.
Responsibilities
Perform calibration and testing of AC and DC power equipment, metering test equipment, and general purpose test and measurement instruments.
Conduct on-site visits for equipment repairs and calibration as part of our field service capability.
Maintain accurate records of calibration activities and ensure traceability to national standards.
Requirements
Bachelor's degree in Electrical Engineering, Electronics, or related field.
Proven experience in calibration, preferably in a UKAS-accredited laboratory environment.
Strong knowledge of AC power and energy measurements, with proficiency in calibration techniques.
Familiarity with electrical test equipment and standards, including power sources and electronic instruments.....Read more...
Electrical Maintenance Engineer
Location: Desford Shift Pattern: 4 on 4 off (Days & Nights) Salary: £57,000 + up to £3,000 annual bonus Pension: Up to 15% total (10% employer, 5% employee)
Overview
We are seeking a highly skilled Electrical Maintenance Engineer to join a large engineering team at a state‑of‑the‑art, highly automated manufacturing facility. This is a brand‑new, high‑volume production site—set to become one of the fastest in Europe—offering excellent training, modern equipment, and long-term progression.
This position has become available due to an engineer leaving, creating an excellent opportunity for a strong electrically‑biased engineer to join a well-supported and forward‑thinking team.
Key Responsibilities
Provide electrical maintenance, fault finding, and repair across a variety of automated manufacturing equipment.
Work on conveyors, mixers, ovens, kilns and other large-scale industrial machinery.
Support continuous improvement, reliability, and efficiency across the site.
Work within a large engineering team (approx. 20 engineers), ensuring safe and efficient operation of all equipment.
Complete handover processes daily (5:30–6:00).
Participate in holiday cover to reduce banked hours (296 hours reducing to 206 after handover deductions).
Undertake planned and reactive maintenance in a dusty, fast‑paced FMCG/industrial environment.
Overtime & Hours Structure
You will have 206 banked hours annually (equivalent to 18 days of overtime per year).
These hours can only be reduced through holiday cover.
Weekend holiday cover = time and a half deduction.
Any overtime not related to holiday cover = paid at time and a half.
Essential Requirements
Electrically qualified (City & Guilds / NVQ / HNC or equivalent).
Strong electrical bias with excellent fault‑finding skills.
Experience in FMCG or heavy industrial environments.
Experience with industrial electrical panels.
Exposure to automation, complex machinery, and fast‑paced engineering settings.
Desired Skills
Siemens experience (including Siemens S7)—desirable but not essential.
Ability to work within highly automated environments.
Experience in large production or manufacturing facilities.
Benefits
Up to 15% total pension (company contributes 10% when you contribute 5%).
Strong training and development opportunities.
Chance to work at a brand‑new, cutting-edge automated site with major production output.
Progression opportunities within a large engineering function.
Working Environment
Dusty industrial environment.
Highly automated systems and robotics.
Fastest producing site in Europe (target).
Large, supportive engineering team (approx. 20 engineers).
Interview Process
Stage 1: Informal technical discussion with Carl, reviewing your CV and experience.
Stage 2: On‑site technical assessment with an engineer.
Bring overalls & safety shoes.
Walk‑through of site.
Basic practical test (panel work, fault finding).
....Read more...
Mechanical Maintenance Engineer
Location: Desford Shift Pattern: 4 on 4 off (Days & Nights) Salary: £55,000 + Up to £3,000 Annual Bonus Pension: 15% Total (10% Employer / 5% Employee)
Overview
We are recruiting for a Mechanical Maintenance Engineer to join a large, well‑established engineering team at a brand‑new, highly automated manufacturing site in Desford. This is an exciting opportunity to join one of the fastest‑producing facilities in Europe, operating within a dusty but cutting‑edge environment filled with modern automated machinery.
The Role
As a Mechanical Maintenance Engineer, you will be responsible for maintaining and improving a wide range of production equipment. Your key responsibilities include:
Key Duties
Mechanical fault finding and repair across fast‑paced production machinery
Conducting planned preventative maintenance (PPM)
Responding to breakdowns and reducing engineering downtime
Working on conveyors, mixers, ovens, and kilns
Supporting the wider engineering team within a highly automated environment
Ensuring all engineering activities are carried out safely and efficiently
Working Hours / Overtime Structure
4 on 4 off, rotating days and nights
296 banked hours annually, reducing to 206 hours after daily handover (5:30–6:00)
206 hours is equivalent to 18 days of overtime per year
Overtime during holiday cover on weekends is paid at time and a half
Any other overtime is also paid at time and a half
About You – Essential Criteria
Must be mechanically qualified (NVQ Level 3 or above)
Experience within FMCG or heavy industrial environments
Strong mechanical fault-finding skills
Ability to work effectively in a dusty, high-output manufacturing site
Industries Considered
FMCG
Heavy Industrial / Process
Automated manufacturing environments
Environment & Machinery
Dusty environment with state‑of‑the‑art automation
Working on equipment such as:
Conveyors
Mixers
Ovens
Kilns
Team Structure
You will join a large engineering team of around 20 engineers, offering strong peer support, cross‑training and excellent knowledge sharing.
Benefits
£55,000 salary + up to £3,000 bonus
15% pension (10% employer contribution)
Overtime paid at time and a half
Opportunity to work at one of the fastest‑producing manufacturing sites in Europe
Career development and progression opportunities
Why Is This Role Available?
Position has become available due to an engineer leaving the business.
Interview Process
Stage 1: Informal technical conversation with Carl, focused on experience and CV details.
Stage 2: On‑site interview with an engineer. Candidates must bring overalls and safety shoes and may complete a basic practical assessment, including panel work and a site walk around.
....Read more...
An exciting opportunity has arisen for an Embedded Software Engineer to join a high-performing R&D team developing next-generation audio products.
This role focuses on designing and developing embedded firmware for DSP processors at the core of advanced audio systems. You will work at the intersection of embedded software, electronics, and digital signal processing, contributing to innovative, high-performance products.
Youll be involved throughout the full product lifecycle, from early concept and prototyping through to development and delivery, collaborating closely with multidisciplinary teams including acoustics and electronics engineers.
Key Responsibilities for the Embedded Software Engineer
- Develop real-time embedded software for DSP-based applications
- Write low-level drivers for on-chip and board-level peripherals
- Design and prototype audio processing algorithms (MATLAB), then implement in C/C++
- Contribute to software architecture and define interfaces between processors
- Collaborate with acoustics engineers to enhance sound quality and system performance
- Support bring-up and debugging of prototype hardware, using lab equipment such as oscilloscopes and logic analysers
- Develop and maintain clear technical documentation
- Participate in peer code reviews and contribute to continuous improvement
Skills & Experience required by the Embedded Software Engineer
Essential:
- Degree in Electronic Engineering, Computer Science, or a related discipline
- Strong C/C++ programming skills (typically 6+ years experience)
- Proven experience with real-time embedded systems
- Familiarity with electronics design and debugging techniques
- Experience developing embedded software for complex hardware products
- Knowledge of modern development tools and practices (Git, Jira, Agile)
Desirable:
- Experience with DSP processors (e.g. Analog Devices SHARC or similar)
- Knowledge of audio DSP techniques such as filter design, FFT, sample rate conversion, and dynamic range control
Why Apply?
- Work on cutting-edge audio products at the forefront of innovation
- Be part of a collaborative, multidisciplinary R&D environment
- Contribute across the full product lifecycle, from concept to delivery
- Opportunity to combine technical depth with creative problem-solving
TT....Read more...
Engineer - Part time ·Growing Dairy Facility·Salary £40-50k Pro Rata·Minimum 3/4 days flexible working·Wincanton – just off A303We are looking for a Part time hands-on Engineer / Engineering Supervisor to join our successful and growing factory team. This is a varied and interesting role and can be carried out on a permanent part time basis with a minimum of 3/4 days a week and a flexible approach.The RoleCarry out various engineering tasks on a small but expanding dairy production plantDeliver both reactive and planned maintenance across production and site services Take ownership of engineering standards, processes, and performance Manage contractors, projects, and site engineering activities Ensure high standards of Health & Safety and compliance are met at all timesWhat We’re Looking ForProven experience in a hands-on engineering roleIdeally a background in dairy or liquid processingStrong mechanical and some basic PLC electrical fault-finding skills would be helpfulExperience in fast-paced manufacturing environments (FMCG preferred)Working HoursThis is a Day-based role however some flexibility will be required as the site operates 05:30 to 20:00, Monday to Friday and sometimes on a weekendThis is a fantastic opportunity for someone who wants more than just an engineering job—you’ll have the chance to help shape engineering on a new and expanding site and be a key part of its success. This role may suit an engineer looking to ‘own’ engineering or a hands on Engineering looking to work less hours. This Role is commutable from Shepton Mallet, Evercreech, Wincanton, Bruton, Yeovil, Shaftesbury, Frome, Radstock, Midsomer Norton ....Read more...
Senior Infrastructure Engineer – Insurance - Solothurn / Hybrid
(Key skills: Linux Systems, Infrastructure Engineering, Automation (Ansible), VMware, Storage & Backup, OpenShift, Public Cloud, Platform Operations, Incident Management, Infrastructure Projects)
Are you an experienced infrastructure engineer who enjoys working on platforms that support critical digital services? Do you want to apply your technical expertise in a stable yet forward-thinking insurance technology environment? If so, this is a great opportunity to take on a senior role with real influence.
Our client, a well-established insurance technology organisation, is seeking a Senior Infrastructure Engineer to help design, operate and improve the systems that underpin key business applications. Working in a hybrid model from Solothurn, you’ll support robust, scalable platforms used across the organisation and its partners.
In this role, you will manage the full lifecycle of Linux-based server environments, from build and configuration through to optimisation and support. You’ll automate infrastructure tasks using tools such as Ansible, support virtualised and container platforms including VMware and OpenShift, and contribute to infrastructure projects and cloud initiatives. You’ll also play a key role in maintaining platform stability through monitoring, incident resolution and continuous improvement.
The ideal candidate will bring strong hands-on experience with Linux infrastructure, automation and enterprise platforms. You’ll be comfortable working in operational environments, collaborating with cross-functional teams and contributing to projects that improve platform resilience and performance. Experience in regulated or financial services environments is advantageous, but not essential.
This is an excellent opportunity to join an insurance-focused technology team where your work directly supports reliable digital services and long-term platform evolution.
Location: Solothurn, Switzerland / Hybrid working Salary: CHF 100,000 – CHF 120,000 + Bonus + Benefits
Applicants must have the right to work in Switzerland.
NOIRSWITZERLANDRECNOIREUROPEREC....Read more...
You’ll be working Monday to Friday on standard day shifts, with the opportunity to earn additional income through premium-rate overtime. The position becomes permanent after a successful probation period, within a well-established, market-leading organisation experiencing continued growth, and includes 28 days’ holiday.The Electrical Fitter role is based in the Leigh area and is easily accessible from surrounding main roads and motorways, including the M6 and A580. The site is commutable from areas such as St Helens, Wigan, Bolton , Liverpool, and Warrington. Duties of the Electrical Fitter position:
Running wiring looms
Using hand and power tools
Working with electrical drawings
Terminating cables
Connecting cables to electrical systems, including lights, beacons, reversing cameras, and other equipment
Splicing, fitting trunking, and soldering
The Electrical Fitter role involves assisting with the manufacture of specialist vehicles. The position would suit candidates with experience in electrics in any capacity; previous experience working with vehicles is not essential, as full training will be provided.
We’re keen to hear from individuals who may have experience as a Panel Wirer, Electrical Fitter ,Installation Engineer, Auto Electrician, CCTV or Alarm Engineer, Telematics Engineer, and/or hold relevant NVQ qualifications or time-served experienceWhat's in return for the Electrical Fitter position:
Hourly rate of £13-14 an hour dependant on experience with OT paid at x1.5
Clean modern working conditions
Permanent position after successful probation
Early finish on a Friday
Further training provided to upskill further
28 days holiday
Free on site parking
If you are interested in the Electrical Fitter role please contact Maisie at E3 Recruitment.....Read more...
Validation Engineer – Oxford – Medical Devices
A rapidly growing Medical Devices company in Oxford is seeking a Validation Engineer to support validation activities on a cutting‑edge medical technology set to transform the lives of hundreds of thousands of people in the UK and internationally.
We are particularly interested in speaking with candidates who have hands‑on experience in Process Validation or Product Validation. Ideally, this experience will come from the Medical Devices or Biotech sectors, although we may also consider applicants from other highly regulated industries.
Experience in writing Master Validation Plans would be highly advantageous, but not essential. You will, however, be responsible for developing, executing, and maintaining validation plans, so prior experience in these areas is required.
Due to the hands‑on nature of the role, this position is on‑site five days per week. You will therefore need to live within a commutable distance of Oxford or be open to relocating.
You will work closely with another Validation Engineer and collaborate cross‑functionally with Quality Assurance, R&D, and Supply Chain teams. Knowledge of ISO 13485 is highly desirable.
Holding a Six Sigma Green Belt or similar qualification that has supported your career in Validation Engineering would be beneficial.
This organisation is well‑funded, scaling quickly, and offers strong long‑term stability alongside excellent opportunities for career development. In addition, they provide a comprehensive benefits package including healthcare, life assurance, pension, and generous annual leave.
Given the level of interest expected for this role, we encourage early applications.
To discuss the position in more detail, contact Andrew Welsh, Director of Medical Devices, Biotech and DeepTech Recruitment at Newton Colmore, on +44 121 268 2240. Alternatively, submit your CV and a member of our team will be in touch to discuss next steps.....Read more...
A Production Engineer is sought to join an established contract electronics manufacturing business in High Wycombe, Buckinghamshire, contributing to the successful and efficient production of electronic assemblies from PCB population through to final assembly, test, packing and despatch.
The Production Engineer, High Wycombe, Buckinghamshire, will be expected to develop your understanding in the field, learning from peers and senior engineers in production engineering and manufacturing best practices. This may include PCB data review, work instruction creation, test jig design, production troubleshooting, equipment monitoring, and continuous improvement activities within an electronics manufacturing environment.
Responsibilities include:
Work with client PCB design data, including Gerber and SMT pick-and-place files, converting them into clear and accurate production instructions.
Create and maintain detailed work procedures and issue production work instructions.
Develop and build production test jigs and wiring harnesses for programming devices.
Debug and resolve production issues, including fault finding to component level on failed devices.
Collaborate with product designers and internal teams to address manufacturability and production challenges.
Monitor production equipment performance, identifying, resolving, or escalating issues as required.
Support continuous improvement initiatives to enhance efficiency, quality, and reliability across manufacturing processes.
Key skills & experience:
Production experience within electronics manufacturing.
Strong understanding of electronic circuits to component level.
Experience reviewing PCB design files and preparing production documentation.
Experience with GC-Powerplace or equivalent systems.
Experience with Siemens Siplace Pro.
Strong problem-solving skills and the ability to work collaboratively within a production environment.
How to apply:
Apply now for the Production Engineer role in High Wycombe, Buckinghamshire. Send your CV to adighton@redlinegroup.Com or call Adam on 01585878821.....Read more...
An opportunity has arisen for a Senior Electronics Engineer to join an innovative and future thinking business based in Berkshire.
The successful Berkshire based Senior Electronics Engineer will work with a market-leading design team focused on developing innovative and robust electronic products. The role involves leading projects from initial concept through to final production, including schematic design, PCB layout, prototyping, testing, and customer support as products scale to volume production.
Key Responsibilities:
Lead electronic product development projects from concept to production.
Design innovative electronics and embedded firmware solutions.
Conduct automated and manual testing for electronics and software.
Act as the lead architect for assigned projects, collaborating with other engineers where needed.
Manufacture and test embedded components and harnesses for prototypes.
Participate in formal design reviews and follow an agile development methodology.
Ensure accurate documentation and maintain up-to-date project tracking (Jira, Atlassian).
Conduct EMC testing and compliance evaluations for various industry standards.
Skills and Experience:
A relevant degree or HNC/HND in Electronic Engineering, or significant proven experience in electronic product development.
Extensive industry experience in electronics design and embedded systems development.
Expertise in Altium Designer for schematic capture and PCB layout.
Ability to design and integrate digital and industrial communication buses such as SPI, I2C, UART, Ethernet, CANbus/LINbus.
Experience with task tracking tools like Jira and version control applications like Bitbucket.
Familiarity with EMC testing and certification requirements for automotive, aerospace, or medical applications is an advantage.
Experience in miniaturisation and high-density electronic designs.
APPLY NOW for the Senior Electronics Engineer position based in, Berkshire, by sending your CV and cover letter to bwiles@redlinegroup.Com or call Ben on 01582 878826 / 07471 181784.....Read more...
Senior Mechanical Engineer - Smart Implant Design
Newton Colmore is working with a medical technology company based in Cambridge, developing complex smart implant technology. They are at the forefront of transforming patient care through novel implantable devices that represent the next generation of medical treatment.
We are seeking a highly skilled Senior Mechanical Engineer to join this pioneering team. This is an opportunity to work on groundbreaking medical technology that will make a real difference to patients' lives with currently unmet clinical needs. You'll be contributing to the design and development of sophisticated smart implants, working with a talented multidisciplinary team in one of the UK's leading technology hubs.
Your work will include designing both overall systems and intricate mechanisms, running experiments and making iterative steps forward toward readying the product for the regulatory process and manufacturing.
The company have two main product lines, working on sensor-based orthopaedic implants and neural implant technology for a range of different therapies.
Here is what’s on offer
Tailored package available, with bonuses.
Comprehensive benefits package with a full suite of options.
Excellent mentoring and professional development opportunities
The chance to work on revolutionary medical technology
Collaborative, innovation-focused environment
Based in Cambridge's thriving tech ecosystem
The candidate we are looking for
We're looking for an experienced mechanical engineer with a strong interest in medical technology and innovation. You'll bring strong technical expertise in mechanical engineering, ideally with exposure to medical devices, miniaturised systems, or implantable technology.
How to Apply
For a confidential discussion about this exciting opportunity, please contact me or make an application now. I can then provide more detailed information about the role, the company, and the application process.
....Read more...
Facilities Planner - North Lanarkshire - Salary up to £28,000 CBW are looking for an experienced planner working within facilities management to join a leading FM business based in the North Lanrkshire region of Glasgow. This role is responsible for organising engineering workloads, managing customer communications, and ensuring smooth daily operations. The position requires strong coordination skills, accurate reporting, and a proactive approach to maintaining service standards and customer satisfaction. Key Responsibilities:Coordinate engineer schedules, balancing planned, reactive, and quoted works to meet operational targets.Manage workflow from job creation to completion, ensuring accurate documentation and timely communication with customers and internal teams.Handle customer queries, escalations, emails, and phone calls, providing updates and resolving issues where possible.Raise purchase orders, liaise with suppliers and subcontractors, and monitor material availability.Arrange engineer travel, accommodation, access requests, and equipment hire as required.Maintain accurate records across CAFM systems and customer portals, ensuring compliance with all procedures.Support reporting requirements and contribute to consistent service-level performance and engineer utilisation.Person Specification:Strong organisational, planning, and prioritisation abilities.Excellent communication and interpersonal skills, with the ability to liaise across departments and with customers.Ability to work autonomously, take ownership, and solve problems efficiently.Proficiency with Microsoft Office and other IT systems.Dependable, punctual, and capable of maintaining high standards under pressure.Open to innovation, contributing ideas to improve processes, systems, and team performance.Salary & Benefits:Salary up to £28,00025 days annual leave (+ public holidays)Employee discount shopping schemes on major brands and retailersBroad range of learning opportunities, such as professional qualifications, collective/individual training, and personalized support programmes....Read more...
Contract Support / Planner - North Lanarkshire - Salary up to £28,000 CBW are looking for an experienced planner working within facilities management to join a leading FM business based in the North Lanarkshire region of Glasgow. This role is responsible for organising engineering workloads, managing customer communications, and ensuring smooth daily operations. The position requires strong coordination skills, accurate reporting, and a proactive approach to maintaining service standards and customer satisfaction. Key Responsibilities:Coordinate engineer schedules, balancing planned, reactive, and quoted works to meet operational targets.Manage workflow from job creation to completion, ensuring accurate documentation and timely communication with customers and internal teams.Handle customer queries, escalations, emails, and phone calls, providing updates and resolving issues where possible.Raise purchase orders, liaise with suppliers and subcontractors, and monitor material availability.Arrange engineer travel, accommodation, access requests, and equipment hire as required.Maintain accurate records across CAFM systems and customer portals, ensuring compliance with all procedures.Support reporting requirements and contribute to consistent service-level performance and engineer utilisation.Person Specification:Strong organisational, planning, and prioritisation abilities.Excellent communication and interpersonal skills, with the ability to liaise across departments and with customers.Ability to work autonomously, take ownership, and solve problems efficiently.Proficiency with Microsoft Office and other IT systems.Dependable, punctual, and capable of maintaining high standards under pressure.Open to innovation, contributing ideas to improve processes, systems, and team performance.Salary & Benefits:Salary up to £28,00025 days annual leave (+ public holidays)Employee discount shopping schemes on major brands and retailersBroad range of learning opportunities, such as professional qualifications, collective/individual training, and personalized support programmes....Read more...
Facilities Planner - Glasgow - Salary up to £28,000 CBW are looking for an experienced planner working within facilities management to join a leading FM business based in the North Lanarkshire region of Glasgow. This role is responsible for organising engineering workloads, managing customer communications, and ensuring smooth daily operations. The position requires strong coordination skills, accurate reporting, and a proactive approach to maintaining service standards and customer satisfaction. Key Responsibilities:Coordinate engineer schedules, balancing planned, reactive, and quoted works to meet operational targets.Manage workflow from job creation to completion, ensuring accurate documentation and timely communication with customers and internal teams.Handle customer queries, escalations, emails, and phone calls, providing updates and resolving issues where possible.Raise purchase orders, liaise with suppliers and subcontractors, and monitor material availability.Arrange engineer travel, accommodation, access requests, and equipment hire as required.Maintain accurate records across CAFM systems and customer portals, ensuring compliance with all procedures.Support reporting requirements and contribute to consistent service-level performance and engineer utilisation.Person Specification:Strong organisational, planning, and prioritisation abilities.Excellent communication and interpersonal skills, with the ability to liaise across departments and with customers.Ability to work autonomously, take ownership, and solve problems efficiently.Proficiency with Microsoft Office and other IT systems.Dependable, punctual, and capable of maintaining high standards under pressure.Open to innovation, contributing ideas to improve processes, systems, and team performance.Salary & Benefits:Salary up to £28,00025 days annual leave (+ public holidays)Employee discount shopping schemes on major brands and retailersBroad range of learning opportunities, such as professional qualifications, collective/individual training, and personalized support programmes....Read more...
Mechanical Maintenance Engineer - Hammersmith, West London - High-end Residential - NO CALL OUT - Permanent - Up to £50,000An exciting opportunity to work for an established FM Property company based in London has arisen. CBW are currently recruiting for a Mechanical Maintenance Engineer to be based at a high-end residential building in Hammersmith. The successful candidate will be a fully qualified Mechanical Maintenance engineer with a proven track record in commercial / property building maintenance. He or she will be required to carry out M&E/Fabric planned and reactive maintenance across this static site. Working with the maintenance team on site. He or she will be required to have an understanding/hands on experience of the below. In return the company is offering a competitive salary, further training, overtime and genuine career progression. Duties and responsibilities:Monitor mechanical plantPlumbing work (Unblocking toilets, replacing taps, washers etc)Pumps, Motors, Seals, BearingsAir Conditioning - Air Handling Units / Fan Coil Unit (Filter changes, cleaning)Water Treatment (Temperature checks / Not dosing)Basic electrical duties (Lamp changes etc)General building fabricEscort specialist sub contractorsHours of workMonday to Friday - 08:00am to 17:00pm (40 hour week)RequirementsMechanically / Plumbing qualified - You must be able to provide copies of your trade certificatesA proven track record in commercial or property maintenanceInstallation experienceExcellent customer service skillsHappy to cover a large siteHonest, hard working and reliablePackageUp to £50,000 per annumOvertime available20 days holiday + BH - Increase to 22 after 3 yearsCompany PensionPlease send your CV to Archie at CBW Staffing Solutions to avoid missing out on this role ! ....Read more...
