Technician work (2D & 3D drawings using state-of-the-art software, e.g. AutoCAD, Revit) as well as engineering work.
A strong interest in civil engineering
Good problem-solving and analytical skills
Good communication and teamwork abilities
Willingness to learn and adapt in a dynamic environment
Training:Civil Engineer Level 6.
This position will be based in our central Bristol office, along with day release at UWE Bristol University.Training Outcome:A Structural Engineer.Employer Description:Egis is a leading global consulting, construction engineering and operating firm. We work hand-in-hand with our clients across every aspect of transport, energy and the built environment to build a more balanced, sustainable and resilient world. The Egis Group has more than 50 years of experience and a team of 22,000 employees in over 100 countries around the world. Joining our Group means, above all, sharing our values as a people-first company, strongly committed to sustainability and innovation.Working Hours :Monday to Friday 9 am to 5 pmSkills: Communication skills,IT skills,Attention to detail,Problem solving skills,Analytical skills,Team working,Creative,Initiative....Read more...
Commercial Gas Engineer - Edinburgh - Salary up to £50,000 DOE CBW have a new opportunity for an experienced Commercial Gas Engineer to join a leading facilities company on a permanent basis covering Edinburgh and Fife. You will be responsible for delivering excellent service standards, while meeting SLA agreements and adhering to maintenance schedules. Key Responsibilities:Carry out planned, reactive, and emergency maintenance on gas appliances and associated systemsSupport plumbing and other tasks where/if requiredDiagnose faults and complete repairs within contractual timescalesComplete all documentation and certification accurately and on timePerson Specification:Qualified to City & Guilds Level II/III or equivalentCommercial gas qualifications: COCN1 or CODNCO1 (CCN1), TPCP1 & TPCP1A, ICPN1, CIGA1, CDGA1, CORT1Domestic gas qualifications Experience with HVAC systems, including air handling units would be beneficial but not essentialKnowledge of health and safety and safe working practicesSalary & Benefits:Salary up to £50,000 DOE25 days holiday plus bank holidays.Fully equipped company van (personal use optional).Generous overtime rates.Company pension scheme.....Read more...
Mechanical Shift Engineer - Healthcare Environment - Edmonton, London - £25 Per Hour An exciting immediate opportunity to join an established building services company based in Edmonton, London. CBW Staffing Solutions are currently recruiting for an Mechanical Shift Engineer to be based covering a commercial site. He or she will be required to carry out planned and reactive building maintenance alongside the maintenance team.Hours of work4 on 4 offdays and nights7am - 7pm / 7pm - 7am£25 per hour Temp to permanent Key duties & ResponsibilitiesPlanned and reactive maintenance HVAC Systems Emergency lighting testsControl PanelsChanging BallastBMS System - Monitor (i.e. Hot & cold)Maintain and update Log booksPlumbing - Unblocking toiletsPumps, motors RequirementsMechanically qualified City & Guilds - Level 2 Must be able to provide copies of your trade certificatesA proven track record in commercial building maintenanceMulti-skilledGood communication skillsClient Facing For more information or to apply please email your updated CV to cammie@cbwstaffingsolutions.com....Read more...
Mechanical Shift Engineer - Commercial Building - Leeds - Immediate start - £17.85 Per Hour An exciting immediate opportunity to join an established building services company based in Leeds. CBW Staffing Solutions is currently recruiting for an Mechanical Maintenace Engineer to cover a commercial site. He or she will carry out planned and reactive building maintenance alongside the maintenance team.Hours of work4 on 4 off 06:00am to 18:00pm18:00pm to 06:00amContract type: Ongoing contractImmediate start Key duties & ResponsibilitiesPlanned and reactive maintenance HVAC Systems Emergency lighting testsControl PanelsChanging BallastBMS System - Monitor (i.e. Hot & cold)Maintain and update Log booksPlumbing - Unblocking toiletsPumps, motors RequirementsMechanically qualified City & Guilds - Level 2 Must be able to provide copies of your trade certificatesA proven track record in commercial building maintenanceMulti-skilledGood communication skillsClient FacingFor more information or to apply please email your updated CV to Jordyn@cbwstaffingsolutions.com....Read more...
Are you a talented and passionate Aeronautical Engineer seeking an exciting opportunity to contribute to cutting-edge projects? Look no further! A global aerospace and defence company is looking for exceptional individuals to join our growing team of engineers.
As an Aeronautical Engineer, you will have the chance to work on a diverse range of projects that span across the defence sector. From rocket engines to mechanical and electronics engineering, your skills and expertise will be put to the test in developing innovative solutions that shape the future of aerospace technology.
Responsibilities
Utilize your aeronautical engineering expertise to design, develop, and analyze various aircraft systems and components.
Collaborate with cross-functional teams to ensure seamless integration of engineering solutions.
Conduct in-depth research and analysis to support the development of state-of-the-art defence technologies.
Stay updated with industry advancements and leverage your knowledge to drive innovation within the company.
Requirements
Bachelor or Master degree in Aeronautical Engineering or a related field.
Proven experience and a strong interest in the defence sector, rocket engines, and mechanical and electronics engineering.
Proficiency in utilizing engineering software and tools to design and analyze aircraft systems.
Excellent problem-solving skills and the ability to think creatively to overcome technical challenges.
Strong communication and teamwork abilities to collaborate effectively with diverse teams.....Read more...
Senior Cloud Platform Engineer – SaaS – Bern / Hybrid
(Key skills: Cloud Platform Engineering, Azure (or AWS/GCP), Kubernetes, DevOps, Infrastructure as Code, CI/CD, Automation, Cloud Security, Azure DevOps, Python / Bash, Microservices, Monitoring & Support, Agile, Cross-Functional Collaboration)
Are you a highly experienced Cloud Platform Engineer with a passion for shaping the backbone of modern SaaS platforms? Do you thrive in environments where innovation, automation and reliability are the hallmarks of successful delivery? If so, this is a fantastic opportunity to take a central engineering role in a forward-thinking technology organisation with global reach.
Our client, a growing international SaaS company expanding its operations, is seeking a Senior Cloud Platform Engineer to design, deploy, operate and optimise cloud infrastructure that supports mission-critical applications and services. Based in Bern with hybrid working (3-days in Offices & 2-days at home), you’ll be part of a dynamic engineering team responsible for delivering secure, scalable and resilient cloud environments that underpin business performance and customer experience.
In this role, you will be instrumental in architecting and managing cloud platforms, with a strong focus on cloud infrastructure and container orchestration. You’ll design, implement and operate Kubernetes clusters, build and refine automation workflows using Infrastructure as Code tools, and co-own the CI/CD pipelines that enable agile release and delivery processes. Partnering with development, security and operations teams, you’ll define and embed cloud and container best practices that deliver speed without compromising resilience or compliance.
The ideal candidate will bring proven hands-on experience in cloud and DevOps engineering, including deep familiarity with cloud services (Azure experience is particularly valuable, though AWS/GCP background is also highly relevant). You’ll have a solid understanding of Kubernetes platform management, microservices architectures and modern automation practices. Excellent communication skills and the ability to work collaboratively across teams are essential for success.
This is a rare chance to play a strategic and highly technical role building cloud solutions that power scalable, enterprise-class SaaS platforms — with the freedom to innovate and influence long-term technical direction.
Location: Bern, Switzerland / Hybrid working
Salary: CHF 110,000 – CHF135,000 + Benefits
Applicants must have the right to work in Switzerland.
NOIRSWITZERLANDREC
NOIREUROPEREC....Read more...
Firmware Engineer - Electronics Hardware Integration - Defence – Cambridge
We have an important Firmware Engineer role for a growing Defence Sector organisation, aimed at contributing to the development of new technologies that will enhance the defence of the UK and other allied nations, with a focus on defensive technologies rather than offensive.
Ideally, we are looking for someone with an electronics engineering background who can leverage their Firmware Engineering experience along with knowledge of electronics hardware integration. It’s preferable if you have a proven track record of successfully completing complex projects resulting in launched devices.
Some of the project you will be involved in will be focus on the advancing new technologies, pushing boundaries, and doing things that no one has done before. This means you won’t get bored in this role and will continue to develop your careers and skills.
While prior experience in the Defence sector is ideal, we are open to consider candidates from other complex fields.
You will need to hold a degree in a software or electronics field that led you into a Firmware Engineer career. Given the nature of this role in the Defence sector, it will be essential for you to be able to obtain security clearance.
In addition to career development and interesting projects, you will also receive an excellent starting salary (dependant on experience level), bonuses, a pension, free lunches, healthcare, on site gym access and other excellent benefits typically associated with larger organisations.
Collaboration is the key focus within this company, operating within a flat structure where peers help develop your knowledge as you contribute to theirs, all while working on some of the most fascinating projects you can imagine.
If this sounds like the kind of work you want to be involved in, I recommend submitting an application now to avoid missing out.
For more general information, please feel free to call Andrew Welsh, Director of Medical Devices Recruitment and Scientific Recruitment Specialists Newton Colmore, on 0121 268 2240, or submit an application, and one of our team members at Newton Colmore will contact you. Please note that we will not be able to discuss the role specifics until we have a copy of your CV.....Read more...
Test Engineer - Power Electronics - Aargau, SwitzerlandMandatory Skillset: PCB, Testing, Electronics
Our Client:Is a pioneering family-owned Swiss company specialising in power electronics that designs, manufactures, and supplies high-power RF amplifiers and transmitters for various industries, including broadcasting, telecommunications, military and defence, and scientific research.
Job Summary:We are seeking a skilled Test Engineer to join our client's team, who is responsible for developing test requirements, creating test instructions, and testing PCBs, assemblies, and systems. The ideal candidate will have a strong background in electronics and measurement technology, with practical experience in handling measuring equipment and a good understanding of radio frequency and power engineering.
Main Responsabilities:
Development of test requirements and new test methods in collaboration with the development department
Creation of test instructions and test reports
Testing, repairing (requires e.g. soldering skills) and commissioning of PCB’s, assemblies and systems as well as participation in tests in the test field
Checking production orders and goods receipt material according to quality characteristics
Perform factory inspections with customers
Management of measuring equipment storage
Construction of test facilities for the rationalization of test procedures
Required Competencies:
Completed technical training in the direction of electronics/measurement technology, technician school, an advantage
Practical experience in handling measuring equipment
Knowledge of radio frequency and power engineering is an advantage
Excellent knowledge of German and English
Positive attitude to work
Reliable team player with a pronounced quality awareness
Enjoy working independently
Benefits:
Competitive salary and benefits package – Up to CHF 110k
Opportunity to work on exciting and challenging projects
Collaborative and dynamic work environment
Professional development and training opportunities
Comprehensive benefits package, including health insurance, retirement plan, and more
Flexible working hours and remote work options
30 Days Annual Leave
Location: Aargau, Baden, SwitzerlandSalary: CHF 80-110k + Bonus Benefits
Tech Stack: PCB, Testing & Electronics
Applicants for the Test Engineer position must be based in Switzerland
NOIRSWITZERLANDRECNOIREUROPERECNOIREURNET
NC/TC/TESARG80110....Read more...
Electrical Engineer/Designer - Power Electronics - Aargau, SwitzerlandMandatory Skillset: Zuken E3 or E-PLAN P8
Our Client:Is a pioneering family-owned Swiss company specialising in power electronics that designs, manufactures, and supplies high-power RF amplifiers and transmitters for various industries, including broadcasting, telecommunications, military and defence, and scientific research.
Job Summary:We seek an experienced Electrical Design Engineer or Elektroplaner with Zuken E3 or E-Plan expertise to join our team. The successful candidate will be responsible for developing schematic drawings and Bills of Materials (BOMs) for complete systems. This role's primary focus will be creating high-quality schematic drawings and BOMs with a good understanding of the Low Voltage Directive.
Requirements:
Higher Technical School Qualification or Apprenticeship in Electrical Engineering
4+ years of experience in electrical design engineering
Strong understanding of electrical design principles, including circuit analysis and design
Proficiency in Zuken E3 or E-PLAN, with expertise in creating schematic drawings and BOMs
Knowledge of the Low Voltage Directive and relevant electrical safety standards
Excellent communication and collaboration skills
Ability to work independently and as part of a team
Strong problem-solving and analytical skills
Familiarity with design automation tools and methodologies
Nice to Have:
Bachelor's or Master's degree in Electrical Engineering or a related field
Experience with PCB design and layout
Knowledge of electrical testing and validation procedures
Familiarity with industry-standard design tools and software
Certification in electrical engineering or a related field
Benefits:
Competitive salary and benefits package – Up to CHF 120k
Opportunity to work on exciting and challenging projects
Collaborative and dynamic work environment
Professional development and training opportunities
Comprehensive benefits package, including health insurance, retirement plan, and more
Flexible working hours and remote work options
30 Days Annual Leave
Location: Aargau, Baden, SwitzerlandSalary: CHF 100 -130k + Bonus Benefits
Tech Stack: Zuken E3, E-PLAN, PCB
Applicants for the Senior Software Engineer position must be based in Switzerland
NOIRSWITZERLANDRECNOIREUROPERECNOIREURNET
NC/TC/EDARG100120....Read more...
Senior Electrical Design Engineer (Substations)
London or Manchester – Hybrid Working
Auxo Talent are currently seeking an experienced Senior Electrical Design Engineer (Substations) to join a leading global consultancy specialising in the development and operation of high-performance data centre facilities. Locations in London or Manchester, Dublin and Amsterdam.
The successful candidate will play a key role in the detailed design and delivery of high voltage substations supporting large-scale data centre infrastructure projects. This is a client-facing role requiring strong technical expertise and the ability to collaborate with multidisciplinary teams.
Key Responsibilities of Senior Electrical Design Engineer (Substations)
Lead detailed substation design for systems ranging from 110kV to 400kV.
Perform power system studies using ETAP including:
Load Flow Analysis
Short Circuit Analysis
Harmonic Analysis
Protection and Coordination Studies
Cable calculations (HV, MV and LV)
Support the Electrical Engineering team in the execution of technically sound substation designs compliant with international standards including IEC, IEEE and BS.
Provide technical guidance to Architect Engineers (AEs) and EPC contractors from concept design through to commissioning.
Participate in all design stages including campus planning, detailed design, IFC documentation and construction support.
Conduct design reviews ensuring compliance with client specifications and national grid codes.
Collaborate with multidisciplinary teams to integrate electrical systems within overall data centre infrastructure designs.
Day-to-Day Responsibilities
Attend internal and external design coordination meetings.
Prepare technical reports, calculation packages and design documentation.
Review milestone design submissions and provide feedback through collaboration platforms.
Work closely with internal teams and external stakeholders.
Identify opportunities for innovation, cost optimisation, sustainability improvements and carbon reduction.
Travel
Occasional travel to project sites across EMEA (typically short trips of 2–3 days).
Requirements
Minimum 10 years’ experience in substation design.
Strong experience working on high voltage substations between 110kV and 400kV.
Solid understanding of protection and control concepts within substation electrical architecture.
Proven experience performing power system studies using ETAP.
Experience collaborating with EPC contractors and multidisciplinary engineering teams.
Software Essential
ETAP
SKM
Amtech
Ampcalc
DigSilent
Cymap
Location
Hybrid working with preferred locations in London or Manchester. Dublin and Amsterdam may also be considered.....Read more...
A Field Service Engineer is sought to join a growing engineering team in Cork, Ireland, contributing to the installation, service, commissioning, and technical support of advanced electronics manufacturing equipment across customer sites.
The Field Service Engineer, Cork, Ireland, will be expected to develop your understanding in the field, learning from peers and senior engineers in technical areas and industry best practices. This may include installation and commissioning of SMT equipment, fault diagnosis, preventative maintenance, calibration, and applications support within electronics manufacturing environments.
Responsibilities include:
Provide installation, service, repair, calibration, and preventative maintenance of equipment at customer sites.
Commission equipment at customer facilities and support final release into production environments.
Assess the suitability of equipment and processes prior to customer purchase where required.
Diagnose faults and resolve technical issues relating to equipment and production processes.
Provide technical expertise and support to customers and internal stakeholders.
Maintain accurate documentation and service records associated with installations, maintenance, and repairs.
Identify equipment and process-related issues that could impact successful installation, training, or commissioning.
Support customer training and applications assistance where required.
Attend meetings, conferences, trade shows, and technical training courses as necessary.
Ensure full compliance with company policies, procedures, and operational standards.
Key skills & experience:
Degree in Mechanical or Electrical Engineering, or equivalent industry experience.
Minimum of five years’ experience within electronic engineering or electronics manufacturing environments.
Experience installing, servicing, repairing, and maintaining industrial or manufacturing equipment.
Knowledge of SMT and electronics manufacturing processes such as printing, dispensing, pick-and-place, reflow, vapour phase, selective and wave soldering, coating, cleaning, testing, and inspection.
Ability to interpret electrical and mechanical engineering drawings.
Strong IT skills including knowledge of PC systems, networking, or SQL databases.
Strong practical mechanical and technical problem-solving abilities.
Highly organised, self-motivated, and able to work independently in field-based environments.
Full driving licence and willingness to travel across Ireland and occasionally the UK.
How to apply:
Apply now for the Field Service Engineer role in Cork, Ireland. Send your CV to adighton@redlinegroup.Com or call Adam on 01582878821.....Read more...
As a First Line IT Engineer you will:
Provide fist line IT support
Monitor Network & Server infrastructure
Taking phone calls on the service desk, handling service portal tickets and emails
Providing remote and on – site IT support where required
Responding to system failures in a timely manner
Creating and maintaining procedures for new and existing processes
Troubleshooting customer technical faults and driving fault resolution
Being able to look for solutions when hitting obstacles before escalating
Maintaining good customer relations by providing excellent customer service
Training:Estio apprenticeship training programmes are delivered virtually by our fully qualified and industry experienced training team. Using their expert knowledge, we’ve purposefully built our programmes around the real-world use of modern technology, so that the skills we create can be directly applied in the workplace.
Throughout the apprenticeship learners receive coaching, help and guidance from a dedicated team who are there to ensure they get the most from their work experience.
Successful completion of this apprenticeship gives you an accredited Level 3 Information Communications Technician qualification.
Communications Technician, with training in how to:
Efficiently operate and control your ICT infrastructure – physical or virtual hardware, software, network services and data storage
Use infrastructure management tools to automate the provisioning, testing, deployment and monitoring of infrastructure components
Prioritise systems support tasks and monitor and maintaining system performance
Maintain regulatory, legal and professional standards
Support the information systems needs for your business
Training Outcome:A few examples are:
Level 2 Engineer
Projects Team
Infrastructure Team Site Engineer
Employer Description:Creative Networks UK is a growing managed service provider dedicated to delivering reliable IT solutions and outstanding customer support. We’re looking for an IT Support Apprentice who is passionate about technology, eager to learn, and ready to kickstart a rewarding career in IT.Working Hours :Monday - Friday, 9.00am - 6.00pm, with 1-hour unpaid lunch break.Skills: Communication skills,Attention to detail,Operates well unsupervised,Takes ownership willingly,Remain calm under pressure,Is proactively innovative,Is logical in approach,Customer service skills,Genuine passion for IT,Punctuality,Time management....Read more...
Mechanical Maintenance Engineer - FM Service Provider - Commercial Building - Aldgate, East London - Up to £45000 per annum Exciting opportunity to work for a leading FM service provider situated in Aldgate, East London. I am currently recruiting for a Multi-Skilled Mechanical Maintenance Engineer to be based in a static role in Aldgate, East London which is a large commercial office building.The successful candidate will be a fully qualified Mechanical Maintenance Engineer with C&G / NVQ level 2 & 3 and a proven track record in commercial building maintenance.He or she will be required to carry out M&E/Fabric planned and reactive maintenance in a large team on a large building responsible for all the landlord services. Working with the maintenance team of 3 engineers on site including the supervisor, you will be required have an understanding/hands on experience of the below. In return the company are offering a competitive salary of £45,000, overtime and career progression.Lighting (Small installation, Fault-finding, Lamping, Changing ballast's, Control panel, Power distribution)Emergency lighting & Fire Alarm Test'sPresurisation UnitsHVAC plantPlant room maintenanceAir Conditioning - Air Handling Units / Fan Coil Unit (Filter changes, cleaning)Chillers - Re-setPumps, MotorsWater Treatment (Temperature checks / Not dosing)Plumbing - Unblocking toilets, changing taps, seals etcBMS System - Monitor (i.e. Hot & Colds)UPS Systems - Monitor / Take readingsGeneral building fabricEscort sub contractorsHours of workMonday to Friday (40 hour week / Overtime available at weekends)Hours 08:00am to 17:00pm (8 hour days) - Every Third Week the hours are 10:00am to 19:00pm PackageBasic Salary up to £45,00025 Days Annual Leave + Bank HolidaysBirthday off as HolidayPension Excellent Benefits package Internal and External Training CoursesGenuine career progression Lots of Overtime available. RequirementsMechanically Qualified - You must be able to provide copies of your trade certificatesCity & Guilds/NVQ Level 2&3 A proven track record in commercial or property maintenanceExcellent customer service skillsHonest, hard working and reliable Please send your CV to Dan Barber at Cbw Staffing Solutions for more Information!....Read more...
Electrical Maintenance Engineer – FM Service Provider – Commercial Office – City of London – Up to £52,000 per annum (Single-Man Site) An exciting opportunity to join an established FM service provider based in the City of London. CBW Staffing Solutions is currently recruiting for an Electrical Maintenance Engineer to take full responsibility for a single-man commercial office site, carrying out both planned and reactive maintenance. This role is ideal for an experienced Electrical Engineer looking to manage their own site and take the next step in their career. The successful candidate will be electrically qualified with a strong background in commercial building maintenance and confident working independently. In return, the company is offering a competitive salary of up to £52,000, excellent overtime opportunities, and clear career progression. Hours of Work: - Monday to Friday- 08:00 am – 17:00 pm Key Duties & Responsibilities:Electrical maintenance including lighting installations, fault-finding, lamping, ballast changes, control panels, and power distributionEmergency lighting testing and compliance checksMonitor and operate BMS systems (hot & cold checks)Carry out planned preventative maintenance (PPM) and reactive worksMaintain and update logbooks and maintenance recordsBasic plumbing duties including unblocking toilets and changing taps/washersMaintenance of pumps and motorsManage workload and site priorities independentlyProvide support with pricing for minor M&E works and projectsParticipate in call-out rota and respond to emergency breakdownsEnsure all works are completed in line with health & safety standardsPackage:Salary: Up to £52,000 per annum1 in 4 call-out (£120 standby)Plenty of overtime available25 days holiday (including birthday off and mental health day)Company pension schemeCareer progression opportunitiesRequirements:Electrically qualified – City & Guilds / NVQ Level 318th Edition Wiring RegulationsProven track record in commercial building maintenanceMulti-skilled across building servicesStrong communication and client-facing skillsAbility to work independently on a single-man siteMust be able to provide copies of trade certificatesPlease send your CV to Bailey White at CBW Staffing Solutions for more information and to avoid missing out on this opportunity!....Read more...
Electrical Shift Engineer – FM Service Provider- Commercial Building – Moorgate, London - £57,000 per annum CBW is currently recruiting for an Electrical Shift Engineer to cover a commercial office located in Moorgate, London. The successful candidate will be a qualified electrical engineer and will have a proven track record in commercial building maintenance. Working with the maintenance team on site. He or she will be required to carry out electrical, mechanical and fabric maintenance to the following. In return, the company is paying a competitive salary of £57,000, further training and career progression. Hours of Work & Package Information 4 on 4 off - 4 days 4 off 4 nights 4 off ....- 07:00 am to 19:00 pm / 19:00pm to 07:00 am£57,000 per annum20 Days holiday Private healthcare Uniform and Tools ProvidedCycle to work schemeOvertime AvailableA lot of progression availableAnnual pay review Key Duties & Responsibilities:Electrical maintenance including lighting, fault-finding, small installations, lamping, ballast changes, control panels, and power distributionEmergency lighting inspections and maintenanceAir Conditioning: AHUs and FCUs (filter changes, cleaning, basic maintenance)Chiller re-sets and first-line troubleshootingWater treatment monitoring (temperature checks)Monitoring mechanical plant, pumps, motors, and plumbing (unblocking toilets, minor repairs)BMS system monitoring (hot & cold checks)Perform all allocated tasks professionally and within allocated timeframesProactively identify, report, and resolve faults with building services equipmentMaintain health & safety compliance, reporting/escalating issues where requiredMaintain clear communication with client staff and site management regarding service issuesEscort specialist subcontractors when requiredBe flexible with site attendance and tasks within competencyRequirements:Electrically qualified level 3 (C&G, NVQ, or equivalent)18th Edition Wiring Regulations knowledgeExperience in large commercial buildingsAbility to provide trade certificates (essential)Proven track record in commercial building maintenanceMulti-skilled (electrical, mechanical, and general building services)Strong communication and customer service skillsMust be able to attend site for a 07:00 am startPlease send your CV today to Alex Denton of CBW Staffing Solutions to avoid missing out on this role.....Read more...
Are you an experienced Software Engineer ready to take the lead on cutting-edge defence technology? Join a specialist engineering company based in Chertsey, delivering bespoke software and integrated systems for mission-critical military applications.
My client designs, develops, and integrates advanced solutions that operate in some of the most demanding environments. This is an opportunity to work at the forefront of innovation, contributing to projects that truly matter.
As a Senior Software Engineer based in Chertsey, you’ll play a key role in leading the design and delivery of high-integrity software systems. Working closely with multidisciplinary teams, you’ll transform complex system requirements into robust, innovative software solutions.
You’ll also take on a leadership role—guiding, mentoring, and supporting a team of engineers to deliver projects on time, within budget, and to the highest standards.
What you’ll be doing as a Senior Software Engineer based in Chertsey
Lead the architectural and detailed design of software within complex systems
Translate system requirements into effective, high-quality software solutions
Develop and test software (primarily in C++) to industry and company standards
Collaborate with electronics, firmware, and systems engineers to ensure full system integration
Present technical designs internally and to customers at all project stages
Ensure compliance with company processes, standards, and best practices
Support project planning, estimation, and delivery alongside the Project Manager
Manage and mentor a team of software engineers, driving performance and development
Contribute to system integration, verification, validation, and customer acceptance
What we are looking for
Essential:
Strong experience in software architecture and detailed design
Proven background in C++ development and testing
Experience working with Linux and Windows development environments
Familiarity with version control and structured development processes
Experience leading or mentoring software teams
Excellent communication skills and ability to produce clear technical documentation
Experience with UML-based design tools (e.G. Enterprise Architect)
Qualifications & Requirements
Degree in Engineering, Mathematics, Science (or equivalent experience)
Ability to obtain UK SC or DV security clearance
Sole UK nationality
Full UK driving licence
Willingness to travel between Chertsey and Portland as required
What you’ll get
Full lifecycle exposure – shape your career across design, development, and integration
Flexible working hours – core hours with flexibility around your day
Paid overtime or time off in lieu – up to 24 additional days leave per year
Holiday shutdown – enjoy time off over Christmas
Competitive pension scheme
Private medical care – access to a nationwide network of clinics
Training & development – continuous upskilling opportunities
Salary sacrifice schemes – including tech and bike options
Gym benefits – discounts or onsite gym access in Chertsey
Company tech – full home and office setup provided
Relocation support – making your move easier
If you are keen to hear more about this interesting Senior software engineer position for my client based in Chertsey, please send over an updated CV to nking@redlinegroup.Com or call 01582 878839 to discuss the opportunity in more detail.....Read more...
Siemens Healthineers is one of the world’s largest suppliers to the healthcare industry and a trendsetter in medical imaging, laboratory diagnostics and medical information technology.
We have an exciting opportunity for enthusiastic and aspiring individuals to join our Field Service Engineer Apprenticeship based in the M6 corridor (Stoke, Crewe, Stafford) region, beginning in August 2026.
This engineering apprenticeship will involve dedicated training on your journey to becoming a skilled Field Service Engineer in the healthcare industry and offers a favourable apprenticeship salary and benefits.
In this Field Service Engineer Apprenticeship role, you will join our field-based engineering team of approximately 200 engineers and be ultimately responsible for installing, repairing, and maintaining our medical systems. You will provide vital technical service support to our customers and work at hospital sites throughout the UK, initially focusing on customer sites within the M6 corridor (Stoke, Crewe, Stafford) region.
Duties include, but are not limited to:
Develop an understanding of relevant industry health and safety standards, regulations, and environmental and regulatory requirements
Maintenance and operational practices, processes and procedures cover a range of plant and equipment
Locate, and rectify faults in plant and equipment
Communicate with and provide information to stakeholders in line with personal roles and responsibilities
Read, understand and interpret information and work in compliance with technical specifications and supporting documentation
Inspect and maintain appropriate plant and equipment to meet operational requirements
Assess and test the performance and condition of plant and equipment
Communicate, handover and confirm that the appropriate engineering process has been completed to specification
Position, assemble, install and dismantle electrical plant and equipment, which may include motors, switchgear, cables and conductors, to agreed specifications
Diagnose and determine the cause of faults in electrical plant and equipment
Replace, repair or remove components in the electrical plant and equipment and ensure its return to operational condition
You can also expect the following:
Travel to sites across your allocated region
Attend other Siemens manufacturing sites across the country on temporary short-term assignments
Visit the Siemens Healthineers Customer Care Centre in Camberley, Surrey
Travel abroad to the Siemens Training Centres in Germany and the US as required
Training:
Practical Skills Training to be delivered at a local college
BTEC Level 3 Diploma to be studied at College on a day-release basis over the first 2 years of the programme - if level 3 not already achieved
If Level 3 already achieved, will work towards achieving the Engineering HNC
Portfolio of competence-based evidence to meet the Knowledge, Skills and Behaviours criteria as outlined in the Standard.
End Point Assessment
Level 2 Functional Skills in maths and English (if required)
Training Outcome:
Upon completion of the Apprenticeship, you will have the opportunity to apply for a full-time position at Siemens. Healthineers as a Customer Service Engineer with the opportunity of further education and product training
Employer Description:Our technology empowers customers to transform the industries that form the backbone of economies: industry, transportation, buildings and grids. Our solutions accelerate the digital transformation of multiple industries, to scale sustainability impact.Working Hours :Monday - Friday (Exact shifts to be confirmed).Skills: Communication skills,IT skills,Attention to detail,Organisation skills,Customer care skills,Problem solving skills,Number skills,Analytical skills,Logical,Team working,Initiative,Patience....Read more...
Siemens Healthineers is one of the world’s largest suppliers to the healthcare industry and a trendsetter in medical imaging, laboratory diagnostics and medical information technology.
We have an exciting opportunity for enthusiastic and aspiring individuals to join our Field Service Engineer Apprenticeship based in the London and Southern England area, beginning in August 2026.
This engineering apprenticeship will involve dedicated training on your journey to becoming a skilled Field Service Engineer in the healthcare industry and offers a favourable apprenticeship salary and benefits.
In this Field Service Engineer Apprenticeship role, you will join our field-based engineering team of approximately 200 engineers and be ultimately responsible for installing, repairing, and maintaining our medical systems. You will provide vital technical service support to our customers and work at hospital sites throughout the UK, initially focusing on customer sites within the London and South England area.
Duties include but are not limited to:
Develop an understanding of relevant industry health and safety standards, regulations, and environmental and regulatory requirements
Maintenance and operational practices, processes and procedures cover a range of plant and equipment
Locate, and rectify faults in plant and equipment
Communicate with and provide information to stakeholders in line with personal roles and responsibilities
Read, understand and interpret information and work in compliance with technical specifications and supporting documentation
Inspect and maintain appropriate plant and equipment to meet operational requirements
Assess and test the performance and condition of plant and equipment
Communicate, handover and confirm that the appropriate engineering process has been completed to specification
Position, assemble, install and dismantle electrical plant and equipment, which may include motors, switchgear, cables and conductors, to agreed specifications
Diagnose and determine the cause of faults in electrical plant and equipment
Replace, repair or remove components in the electrical plant and equipment and ensure its return to operational condition
You can also expect the following:
Travel to sites across the South of England
Attend other Siemens manufacturing sites across the country on temporary short-term assignments
Visit the Siemens Healthineers Customer Care Centre in Camberley, Surrey
Travel abroad to the Siemens Training Centres in Germany and the US as required
Training:
Practical Skills Training to be delivered at Basingstoke College of Technology
BTEC Level 3 Diploma to be studied at College on a day-release basis over the first 2 years of the programme - if level 3 not already achieved
If Level 3 already achieved, will work towards achieving Engineering HNC
Portfolio of competence-based evidence to meet the Knowledge, Skills and Behaviours criteria as outlined in the Standard
End Point Assessment
Level 2 Functional Skills in maths and English (if required)
Training Outcome:Upon completion of the Apprenticeship, you will have the opportunity to apply for a full-time position at Siemens Healthineers as a Customer Service Engineer with the opportunity of further education and product training.Employer Description:Our technology empowers customers to transform the industries that form the backbone of economies: industry, transportation, buildings and grids. Our solutions accelerate the digital transformation of multiple industries, to scale sustainability impact.Working Hours :Monday - Friday. Exact shifts to be confirmed.Skills: Communication skills,IT skills,Attention to detail,Organisation skills,Customer care skills,Problem solving skills,Number skills,Analytical skills,Logical,Team working,Initiative,Patience....Read more...
As an Apprentice Trainee BMS (Building Management Systems) Engineer, you will be part of a dynamic team working on cutting-edge systems that control and optimise building environments. From heating and ventilation to lighting and energy monitoring, you will learn how to make buildings smarter, greener, and more efficient.
As an Apprentice Trainee BMS (Building Management Systems) Engineer, you will be part of a dynamic team working on cutting-edge systems that control and optimise building environments. From heating and ventilation to lighting and energy monitoring, you will learn how to make buildings smarter, greener, and more efficient.
What You Will Learn and Do:
Your development will combine hands-on experience with industry-recognised training courses, giving you the skills to become a fully qualified BMS Controls Service & Maintenance Engineer.
You will start by shadowing experienced engineers on-site and gradually take on responsibilities such as:
Strategy Modifications - Understanding and applying changes to optimise system performance
Service & Maintenance Visits - Assisting with routine checks and ensuring systems run smoothly
Remote Access Configuration - Learning how to set up and manage remote connectivity for BMS systems
Call-Outs - Supporting engineers in responding to urgent issues and troubleshooting problems and attending at a later date
Paperwork & Reporting - Preparing accurate documentation and reports following site visits
Through this structured approach, you will gain the technical knowledge and confidence to progress into a skilled role within our business.
Assist in the installation, commissioning, and maintenance of BMS systems
Learn to diagnose and resolve technical issues with building automation systems
Work alongside experienced engineers on real-world projects.
Gain hands-on experience with industry-leading technologies and software
Strategy modifications:
Service and Maintenance visits
Remote access configuration
Callouts
Paperwork and reports associated with site visits
Training:Automation and controls Engineering Technician Level 4/Skills England.Training Outcome:We are committed to your growth and success:
Yes, there is progression! You will have a clear pathway to becoming a fully qualified BMS Service & Maintenance Engineer
Further Training: Access to advanced courses and certifications to deepen your expertise
Permanent Position: Upon successful completion of your apprenticeship, you will have the opportunity to secure a permanent role within the company
Proven Track Record: Some of our current employees have been with us for years and have progressed through the ranks, demonstrating our commitment to developing talent and promoting from within
Employer Description:We work with our clients to integrate all of their existing BMS (Building Management System) controlled equipment into a single centralised system which they have full control and oversight over.We specialise in helping clients with large multi-property portfolios consolidate their BMS controlled estate creating one managed BMS system with global control commands and full individual site HTML5 web access.No contracts or long-term energy buy ins, we facilitate our clients to have their whole estate controlled and monitored entirely by themselves.Working Hours :Monday - Friday - 08:00 - 16:00.Skills: Communication skills,IT skills,Attention to detail,Organisation skills,Customer care skills,Problem solving skills,Presentation skills,Administrative skills,Number skills,Analytical skills,Logical,Team working,Creative,Initiative,Non judgemental,Patience,Enthusiasm/Self Motivated,Trustworthy,Reliable....Read more...
Key Responsibilities:
Apprenticeship Training: Follow a structured learning path in the Level 4 Network Engineer standard
Field Work: Travel to customer sites and data centres, supporting network hardware, network software, and network solutions
Customer Engagement: Build and maintain strong customer relationships, handle escalations, and ensure a high level of customer satisfaction
Commissioning Solutions: Work on the delivery and implementation of high-end network solutions
Knowledge Sharing: Contribute to team collaboration and enhance knowledge across the business
A large part of the role will involve keeping documentation and reporting tools up to date including: MyPlanning (project time tracking), spreadsheets, technical performance reviews, project documents, and writing change plans/scripts etc.
Essential Skills:
Passion for IT: A strong interest in Networking technologies
Collaborative Mindset: Enjoy working with others to solve problems
Strong Communication: Excellent verbal and written skills
Motivation: High level of self-motivation and drive as well as the ability to work independently and as part of a team
Commitment to Learn: A genuine desire to build a career in IT
Candidates must have a long-term aspiration of a career in the IT industry and be prepared to work hard to complete the challenging, formal IT Level qualification
Security Clearances Notes:
This role may require national security and government level vetting, including Baseline Personnel Security Standard (BPSS) checks, a Disclosure and Barring Service (DBS) check, and Security Check (SC) clearance. These checks are mandatory for all employees aligned to a secure customer account which require such security clearances, due to the sensitive nature of the work and the secure environments in which our clients operate. As part of this process, we are required to ask about criminal record information. The level of vetting for this role is exempt from certain provisions of the Rehabilitation of Offenders Act 1974. This means that, for the purposes of security clearance, you may be required to disclose both spent and unspent convictions, cautions, or other relevant information. Please note that individuals who are unable to obtain -or maintain- the required level of security clearance throughout their employment cannot remain in their role. This includes situations where criminal record information prevents clearance from being granted, as holding the appropriate clearance is a condition of employment. All information you provide will be handled confidentially and in accordance with data protection legislation. It is essential that the information you provide is accurate. Knowingly withholding information relevant to the vetting process or providing information that is later found to be inaccurate, may affect your application or, if discovered after employment has begun, will lead to a review of your security clearance and potentially your continued employment.
Apply Now:
If you’re ready to take the next step in your IT career and eager to learn and grow with a leading global company, we want to hear from you! Apply today and start your journey with CDS.Training:During this apprenticeship, you will follow a fully supported training programme with LearnTech, delivered through combined weekly remote classroom-based training, workplace assessment/training and online learning working towards completing the Level 4 Network Engineer standard.
The training covers the following core occupational duties:
https://skillsengland.education.gov.uk/apprenticeships/st0127-v1-4Training Outcome:Upon completion of this apprenticeship, you will have gained a qualification for a Level 4 Network Engineer.Employer Description:Who We Are:At Hewlett Packard Enterprise (HPE), we believe in advancing edge-to-cloud solutions to help businesses succeed. Our subsidiary, CDS, supports HPE’s offerings, and we’re excited to welcome passionate apprentices to our two-year apprenticeship programme.
What We Offer:
Fully Funded Apprenticeship: L4 Network Engineer Apprenticeship through LearnTech, plus access to CDS internal programmes and the HPE Early Careers programme.
Dedicated Mentorship: Learn from experienced team members who are committed to your growth.
Hands-On Experience: Work on networking technologies and business-critical projects.
Training & Development: Certification through LearnTech and CDS internal training. Aruba and Juniper Certifications.
Career Opportunities: Potential to transition into a permanent Networking Engineer role or explore other career paths within HPE.
Working Hours :Monday - Friday, shifts to be confirmed.Skills: Communication skills,IT skills,Attention to detail,Organisation skills,Customer care skills,Problem solving skills,Number skills,Team working,Initiative....Read more...
Great Dunmow
£31,000 – £36,000 + Sick Pay + Monday–Friday + Free Lunch + Training + Pension + Package + Immediate Start
Fantastic opportunity for a Yard Worker looking for a permanent position with a company that truly values its employees. Join an established business that can future-proof your career while offering an excellent work-life balance.
With a strong reputation in the industry, this specialist agricultural company provides full training to ensure you can perform your role to the highest standard. Benefits include free lunches and a Monday–Friday schedule with no weekend work. This role is ideal for someone with engineering hobbies or a mechanical background who is looking to build a long-term career as a Yard Worker.
Your role as a Yard Worker will include:
* Loading and unloading goods* Pressure washing equipment* Carrying out light mechanical repairs on company equipment* Maintaining cleanliness of the yard and workshop
As a Yard Worker, you will have:
*Experience using power tools and mechanical equipment*Willingness to work outdoors full-time*Previous experience as a handyman or engineer*The ability to commute to Thaxted
Keywords: Yard Worker, Handyman, Yard Manager, Technician, Engineer, Engineering Labourer, Labourer, Dunmow, Thaxted....Read more...
AV Installation Engineer – This is a new position for specialist AV custom install integrator who work to the highest standards. The client are a small, friendly successful team who have been in the world of Ci since its inception. Due to continue growth they are seeking to add a new member of the engineering department to help deliver on the continuous busy order book. They require an av installation engineer that has been working on bespoke AV projects for between 3-4 years and is now seeking a new company to call home. Projects will predominantly based in London and the south east but on occasion you will need to travel overseas. I need you have awesome hands on skills with a keen eye for perfection. Previous experience with Crestron control installation and configuration is highly desirable, as well as good knowledge of Lighting specifically Lutron. If you also are able to bring skills with IT home networking then please make this clear within the CV. To find out more please send me your full technical AV CV asap.
AV A-V A/V AUDIOVIUSAL AUDIO-VISUAL AUDIO/VISUAL LIGHTING CI CEDIA CUSTOM INSTALLATION INTEGRATION TECHNICAL CEDIA SMARTHOME AUTOMATION CONTROL RACK CRESTRON CONTROL4 LUTRON PROGRAMM COMMISSION LONDON SURREY KENT
YOU MUST BE LIVING IN THE UK AND ALLOWED TO WORK HERE LEGALLY AND SHOW A CLEARLY DEFINED SKILL SET WITHIN THE CV....Read more...
Embedded Software Engineer – Biotech or Medical Devices – Cambridge
An established and growing Biotech and Medical Devices company, based in Cambridge, is currently looking for an Embedded Software Engineer to join them and take responsibility for the continued development of their software on electro-mechanical devices that are used in the biotech and medical devices sectors.
Based in Cambridge, you will be working alongside scientists, engineers, designers, physicists and other medical devices and biotech industry experts in the development this cutting-edge medical device.
Ideally, you will have worked within the Biotech or Medical Devices sectors previously and have knowledge of ISO 13485, IEC 62304 and ISO 14971.
The company has the unique ability to offer an excellent benefits package, pension, medical insurance, life assurance and some other excellent benefits alongside a competitive starting salary.
We are looking for someone to start as soon as possible and interviews will happen quickly, with this in mind, if you are interested in the role, I suggest making an application now or risk missing out.
For more information, please feel free to call Andrew Welsh, Director of Medical Devices, Biotech and Drug Discovery recruitment specialists, Newton Colmore, on +44 121 268 2240 or submit an application, and a member of our team at Newton Colmore will be in touch with you.
....Read more...
Snr AV Installation Engineer – This new position in has arrived due to my client’s present projects and a full order book. This role requires you to have between 3-5 years of experience from within the custom installation marketplace. You will be working on bespoke AV projects being delivered to high end residential clients. The projects are in and around the Nottinghamshire area so this means your geographic location must be local. You will be a client facing engineer that can take charge on site and manage the more Jnr engineers within your team. You will be a WHIZZ with paperwork and have no issues with wiring diagrams, installation schematics and rack build drawings. Your hands on skills regarding both 1st fix and 2nd fix need to exemplary, It would 100% ideal that you have skills with the commissioning, configuration and basic programming of Crestron Home, Control4 and Lutron, so please make this clear within your CV. If you have these skills, then please send a full technical CV asap.
AV A-V A/V AUDIOVIUSAL AUDIO-VISUAL AUDIO/VISUAL LIGHTING CI CEDIA CUSTOM INSTALLATION INTEGRATION CEDIA SMARTHOME AUTOMATION CONTROL RACK CRESTRON CONTROL4 LUTRON PROGRAMM COMMISSION NOTTS LEICS NORTHANTS NOTTINGHAMSHIRE, NORTHAMPTONSHIRE LEICESTERSHIRE
YOU MUST BE LIVING IN THE UK AND ALLOWED TO WORK HERE LEGALLY AND SHOW A CLEARLY DEFINED SKILL SET WITHIN THE CV....Read more...
Job Description:
Job Title: Multi-Skilled Maintenance EngineerLocation: Low Moor, BradfordWorking Hours: Monday to Friday, 8:00 AM to 5:00 PM (overtime available)Job Description:We are looking for a genuinely multi-skilled Maintenance Engineer to join our clients team in Low Moor, Bradford. This is a diverse, hands-on role in a fast-paced manufacturing environment where you'll be expected to work across both mechanical and electrical systems.You’ll be responsible for carrying out a wide range of planned and reactive maintenance tasks, supporting continuous production, and ensuring the safe and efficient operation of all plant equipment.Key Responsibilities:Mechanical & Electrical Maintenance:
Maintain and repair mechanical systems: belts, chains, bearings, pipework, pumps, valves, and filters.Work on pneumatic and hydraulic systems including solenoids, actuators, rams, and compressors.Fault-find and repair basic electrical issues, including sensors, switches, fuses, relays, and overloads.Carry out safe isolation of electrical equipment and support minor electrical installations or modifications.Understand and work with steam systems, boilers, control valves, and water softening equipment.Diagnose and resolve faults in automated and computer-controlled machinery.Support continuous improvement and preventative maintenance initiatives.
Essential Skills & Experience:
Demonstrable experience in a similar multi-skilled maintenance role within manufacturing or industrial environments.Strong mechanical and electrical fault-finding abilities.17th / 18th Edition qualifiedConfident working safely with 3-phase systems, basic control panels, and low-voltage equipment.Skilled in using diagnostic tools and interpreting technical documentation.Comfortable working across a wide range of systems from pneumatics and hydraulics to electrical controls.
Desirable Skills & Experience:
Familiarity with PLC-controlled equipment (understanding inputs/outputs, basic diagnostics).Experience with steam and compressed air systems.Experience with continuous improvement or lean manufacturing practices.
Personal Attributes:
Versatile, hands-on, and proactive.Strong communication and problem-solving skills.Able to work independently and collaboratively in a team.Reliable, detail-oriented, and safety-conscious.
If you're a capable and well-rounded Multi-Skilled Engineer looking to bring your talents to a forward-thinking team, we’d love to hear from you
....Read more...
