Main Responsibilities:
Source candidates through job boards, social media, internal databases, and networking.
Make outbound calls to engage with potential candidates for active vacancies.
Write and post compelling job adverts aligned with the M&E sectors Rubix specialises in.
Build and maintain a talent pipeline across areas such as Electrical, Solar & EV, Smart Metering, Plumbing & Heating, and Building Services.
Pre-screen candidates to assess skills, qualifications, and role suitability.
Coordinate interviews between candidates and consultants.
Manage candidate compliance by gathering documentation and verifying information.
Administration & Database Management
Update CRM systems with accurate candidate information.
Ensure all recruitment activity is documented in line with internal processes.
Support consultants with preparing CV submissions and shortlists.
Deliver a positive candidate experience by providing updates and feedback.
Build rapport with new applicants and maintain ongoing communication.
Promote Rubix M&E’s values and service standards in all interactions.
Salary Increase Scheme - Rubix M&E operates a clear, performance driven salary progression structure designed to reward consistency, growth, and success in the role.
Base Starting Salary: £16,000
Performance Review Cycle: Every 3 months
Requirement: To qualify for each salary increase, the Resourcer must hit their monthly target for all 3 months within the review period.
Salary Progression Path
The salary progression works as follows:
• Start: £16,000
• After 3 months (if targets were hit each month): Salary increases to £21,000
• After 6 months (if targets were hit each month): Salary increases to £24,000
• After 9 months (if targets were hit each month): Salary increases to £27,000
This scheme allows new starters to significantly increase their earnings within the first year based purely on consistent performance.Training:Founded in 1974, we've been delivering market-leading learning and talent solutions for over forty years. We’re privileged to help individuals unlock their potential and realise the value of their skills and talents. As one of the UK's largest and longest-established apprenticeship and training providers, we're proud to help organisations and individuals unlock their potential and make skills really work for them. Upon completion of this 15-month Apprenticeship, you will have obtained your Business Administration L3 Apprenticeship.Training Outcome:There is a possibility of being offered a full-time role after successful completion of the apprenticeship.Employer Description:Rubix M&E is the UK’s No.1 Mechanical & Electrical recruitment agency, specialising in placing skilled professionals across Building Services, Facilities Management, Power & Utilities, Energy, Manufacturing, and related technical sectors. The business is known for its efficient, innovative recruitment approach and strong industry network.Working Hours :Mon-Fri (8:30 am - 5:30 pm.)Skills: Administrative Skills,Attention to Detail,Customer Care Skills,Initative,Organisational Skills,Patience,....Read more...
Stripping and refitting all vehicle parts
Rebuilding vehicle suspension and resetting the geometry
Removing, replacing, and reinstalling SRS systems
Reinstating the vehicle to pre-accident and a roadworthy condition
Training:
Our training partner will deliver a high-quality Vehicle Mechanical, Electrical & Trim (MET) Technician Level 3 programme here in our state-of-the-art Bodyshop
No college attendance required as training will take place onsite
You will work alongside a highly skilled mentor who will support you in becoming a skilled and qualified vehicle MET technician
You will achieve a certification in Refrigerant Handling (EC 842-2006)
Once the apprenticeship is complete, you will achieve a Level 3 Vehicle damage mechanical, electrical and trim (MET) technician qualification
Level 2 maths and English Functional Skills (if not already achieved)
Training Outcome:Following completion of your apprenticeship, you can expect permanent employment as well as opportunities to progress within the company into roles such as Workshop Controller, Vehicle Damage Assessor or Bodyshop Manager.Employer Description:Established in 1997 by Paul King, Brandon Accident Repair Centre is a professional and highly regarded independent accident repair centre.
Brandon Accident Repair Centre is a local, independent, approved vehicle accident repair centre based in the Suffolk area. We undertake all aspects of vehicle body damage repair from minor cosmetic repairs to larger structural aluminium damage.
We work alongside the UK’s leading manufacturers, insurers, accident management companies, and local business fleets, as well as private vehicle owners, carrying out body repairs on all makes and models of cars and light commercial vehicles & vans.
We have earned a great reputation in the local area for the high quality of repair work and first class customer service we provide and our much valued accreditations guarantee the highest standards – covering Thetford, Mildenhall & Bury St Edmunds.
We repair all makes and models of cars and light commercial vehicles, including 4×4 and USA specification vehicles.
Based in Brandon, on the Suffolk, Norfolk and Cambridgeshire borders, we cater for customer vehicle repairs covering all three counties.
We are a trusted partner to many of the UK’s major insurance companies, and also the United Services Automobile Association (USAA).
Our team holds IMI / ATA accreditation, ensuring each technician meets the highest industry standards for skills, knowledge, and professionalism in vehicle repair.Since 2009, we’ve held ISO9001 certification, reflecting our commitment to consistent quality management and continuous improvement across all areas of our service.Originally PAS125, our BS10125 accreditation confirms that our vehicle body repairs meet rigorous safety, quality, and technical standards—giving you peace of mind every time.Working Hours :Typically, Monday - Friday, 8.00am - 4.30pm.Skills: Communication skills,IT skills,Attention to detail,Organisation skills,Problem solving skills,Number skills,Analytical skills,Logical,Team working,Creative,Initiative,Physical fitness....Read more...
About the Apprenticeship:
We are looking for an Apprentice Design Engineer to join our technical team and support the delivery of a range of construction and engineering projects.
This apprenticeship combines:
Academic study (college with the potential to progress to university)
Hands-on experience in the workplace
Training in industry software and digital design tools
You will develop an understanding of engineering principles, while learning how design concepts are developed and translated into detailed 3D models and technical information used in construction projects
Our engineering teams focus on developing engineering solutions, while technicians help transform these designs into coordinated digital models and drawings used during the construction process.
What You’ll Learn:
During your apprenticeship you will gain experience in:
Building Information Modelling (BIM)
3D design and modelling software such as Revit
Building performance and analysis tools such as IES Virtual Environment
Engineering design development and coordination
Working on real construction projects with experienced engineers and technicians
There will also be opportunities to explore different career paths within the business, including:
Building Information Modelling
Mechanical Engineering
Electrical Engineering
Sustainability
Building Performance Engineering
What You’ll Be Doing:
As part of the team, you will:
Assist with the development of engineering design models and drawings
Support engineers and technicians on live construction projects
Help coordinate design information between different disciplines
Learn how digital tools are used to support building design and construction
Contribute to improving digital engineering workflows and processes
You will also be encouraged to explore new technologies, including how AI and advanced digital tools can support the development of engineering design information
Training:Engineering and Manufacturing Support Technician Level 3.Training Outcome:Development and progression will initially follow the requirements of the apprenticeship but will then lead onto further opportunities depending upon the route selected, for example Building Information Modelling, Electrical Engineering, Mechanical Engineering or Sustainability and/or Building Performance Engineering.Employer Description:TGA Consulting Engineers LLP provides expert design and engineering advice in Building Engineering Services. We work across the construction industry on a wide range of projects including new buildings and refurbishments, supporting both traditional design teams and design-and-build contractors.
Our experience spans many sectors, including:
Healthcare
Education (schools, colleges and universities)Commercial offices
Historic buildings
Museums and galleries
Retail spaces
Laboratories
Industrial developments
TGA has offices in Newcastle, Stockton and Leeds. This role is expected to be based in the North East, but you will work with teams across the wider business.Working Hours :Monday - Friday 8.00am - 4.00pm. Lunch can be taken between 12:30pm and 1:15pm.Skills: Communication skills,IT skills,Attention to detail,Organisation skills,Problem solving skills,Administrative skills,Number skills,Analytical skills,Logical,Team working,Initiative....Read more...
The MET Technician / Strip Fitter role:
- Up to £25 per hour + OT
- Monday - Friday, 45 hrs per week, flexible start and finish times
- Permanent Role
Our client, a busy Accident Repair Centre in the Dunstable area, is looking to expand their team with the addition of an experienced MET Technician / Strip Fitter.
Key MET Technician / Strip Fitter Roles and Responsibilities:
- Removing and refitting parts to ensure body repairs are to a very high standard
- Dismantle and rebuild vehicles as instructed
- To report unseen damage, absent from estimate as soon as its identified
- Have a good level of efficiency and attention to detail
- Be able to work in a team and as an individual
Minimum Requirements as a MET Technician / Strip Fitter:
- Time served and/or qualified to city & guilds or NVQ level
- Have Previous experience as an MET Technician
- ATA is advantageous but not essential
If you want to hear more about the MET Technician / Strip Fitter role, please send us your CV by clicking apply now or by contacting Piam Pishgoo on 01202 552915 / piam@holtautomotive.co.uk to discuss further.
MET Technician / Strip Fitter - up to £25 p/h Bodyshop Dunstable
MET Technician / Strip Fitter / Bodyshop Technician / Mechanical Electrical Trim Technician....Read more...
Mechanical Fitter required to join an aerospace production team to work in a cleanroom environment on the assembly, integration and testing of aerospace devices.
Our international Aerospace and Defence client is going through a continued period of expansion and looking for Precision Mechanical Assembly Technicians. The ideal candidate will have experience as a Mechanical fitter experience ideally through apprenticeship with exposure to and of the following: non return valves, flow control valves, solenoid valves, cold gas thrusters or any fluidic components for the space industry.
Training and skills development will be provided, extended working hours may be required to meet production targets.
Responsibilities
Precision assembly and test activities in a Class 8 clean room.
Testing the integrity of assembled systems using high pressure gases and leak detection equipment such as helium mass spectrometers.
Cleaning components in preparation for assembly and test activities using automatic particle counting equipment and patch sample counting techniques.
Electrical testing
Gas flow testing of valves, thrusters and fluidic components to ensure components are within
tolerance prior to assembly.
Digital voltmeters, oscilloscopes, data acquisition systems, high voltage dielectric and insulation
resistance test equipment.
Material joining processes including manual TIG (Tungsten Inert Gas) welding, orbital welding, and compiling weld inspection reports on parts and test pieces.....Read more...
MET Technician / Strip Fitter Technician Vacancy:
- Salary up to £24 p/h + Bonus + OT (if desired)
- Permanent - Mon to Fri 45 hrs per week
- 23 Days Holiday + Bank holidays
- Permanent Role
This role will be working a busy Bodyshop/Accident Repair Centre in the Binfield area, is looking to expand their team with the addition of an experienced MET Technician / Strip Fitter.
Key MET Technician / Strip Fitter Roles and Responsibilities:
- Removing and refitting parts to ensure body repairs are to a very high standard
- Dismantle and rebuild vehicles as instructed
- To report unseen damage, absent from estimate as soon as its identified
- Have a good level of efficiency and attention to detail
- Be able to work in a team and as an individual
Minimum Requirements as a MET Technician / Strip Fitter:
- Time served and/or qualified to city & guilds or NVQ level
- Have Previous experience as an MET Technician
- ATA is advantageous
If you want to hear more about this MET Technician / Strip Fitter position, please send us your CV by clicking 'apply now' or contact Piam Pishgoo on 01202 552915 / piam@holtrecruitment.co.uk to discuss further.
MET Technician / Strip Fitter - up to £24 p/h Bodyshop Binfield
MET Technician / Strip Fitter / Bodyshop Technician / Mechanical Electrical Trim Technician....Read more...
Mechanical Fitter required to join a precision aerospace production team to work in a cleanroom environment on the assembly, integration and testing of aerospace devices.
Our international Aerospace and Defence client is going through a continued period of expansion and looking for Precision Mechanical Assembly Technicians. The ideal candidate will have experience as a Mechanical fitter experience ideally through apprenticeship with exposure to and of the following: non return valves, flow control valves, solenoid valves, cold gas thrusters or any fluidic components for the space industry.
Training and skills development will be provided, extended working hours may be required to meet production targets.
Responsibilities
Precision assembly and test activities in a Class 8 clean room.
Testing the integrity of assembled systems using high pressure gases and leak detection equipment such as helium mass spectrometers.
Cleaning components in preparation for assembly and test activities using automatic particle counting equipment and patch sample counting techniques.
Electrical testing
Gas flow testing of valves, thrusters and fluidic components to ensure components are within
tolerance prior to assembly.
Digital voltmeters, oscilloscopes, data acquisition systems, high voltage dielectric and insulation
resistance test equipment.
Material joining processes including manual TIG (Tungsten Inert Gas) welding, orbital welding, and compiling weld inspection reports on parts and test pieces.....Read more...
The MET Technician / Strip Fitter role:
- Salary of up to £24 p/h + Bonus with great company benefits
- Monday to Friday only - Permanent Role
- Ongoing training and development
Our client, a busy Accident Repair Centre in the Leatherhead area, is looking to expand their team with the addition of an experienced MET Technician / Strip Fitter.
Key MET Technician / Strip Fitter Roles and Responsibilities:
- Removing and refitting parts to ensure body repairs are to a very high standard
- Dismantle and rebuild vehicles as instructed
- To report unseen damage, absent from estimate as soon as its identified
- Have a good level of efficiency and attention to detail
- Be able to work in a team and as an individual
Minimum Requirements as a MET Technician / Strip Fitter:
- Time served and/or qualified to city & guilds or NVQ level
- Have Previous experience as an MET Technician
- ATA is advantageous but not essential
If you want to hear more about the MET Technician / Strip Fitter role, please send us your CV by clicking apply now or by contacting Piam Pishgoo on 01202 552915 / piam@holtautomotive.co.uk to discuss further.
MET Technician / Strip Fitter - up to £24 p/h Bodyshop Leatherhead
MET Technician / Strip Fitter / Bodyshop Technician / Mechanical Electrical Trim Technician....Read more...
The MET Technician / Strip Fitter role:
- Salary of up to £25 p/h + Bonus
- Monday to Friday only - Permanent Role
- Ongoing training and development
Our client, a busy Accident Repair Centre in the Reigate area, is looking to expand their team with the addition of an experienced MET Technician / Strip Fitter.
Key MET Technician / Strip Fitter Roles and Responsibilities:
- Removing and refitting parts to ensure body repairs are to a very high standard
- Dismantle and rebuild vehicles as instructed
- To report unseen damage, absent from estimate as soon as its identified
- Have a good level of efficiency and attention to detail
- Be able to work in a team and as an individual
Minimum Requirements as a MET Technician / Strip Fitter:
- Time served and/or qualified to city & guilds or NVQ level
- Have Previous experience as an MET Technician
- ATA is advantageous but not essential
If you want to hear more about the MET Technician / Strip Fitter role, please send us your CV by clicking apply now or by contacting Piam Pishgoo on 01202 552915 / piam@holtautomotive.co.uk to discuss further.
MET Technician / Strip Fitter - up to £25 p/h Bodyshop Reigate
MET Technician / Strip Fitter / Bodyshop Technician / Mechanical Electrical Trim Technician....Read more...
The MET Technician / Strip Fitter role:
- Salary of up to £25 p/h + Bonus
- Monday to Friday only - Permanent Role
- Ongoing training and development
Our client, a busy Accident Repair Centre in the Reigate area, is looking to expand their team with the addition of an experienced MET Technician / Strip Fitter.
Key MET Technician / Strip Fitter Roles and Responsibilities:
- Removing and refitting parts to ensure body repairs are to a very high standard
- Dismantle and rebuild vehicles as instructed
- To report unseen damage, absent from estimate as soon as its identified
- Have a good level of efficiency and attention to detail
- Be able to work in a team and as an individual
Minimum Requirements as a MET Technician / Strip Fitter:
- Time served and/or qualified to city & guilds or NVQ level
- Have Previous experience as an MET Technician
- ATA is advantageous but not essential
If you want to hear more about the MET Technician / Strip Fitter role, please send us your CV by clicking apply now or by contacting Piam Pishgoo on 01202 552915 / piam@holtautomotive.co.uk to discuss further.
MET Technician / Strip Fitter - up to £25 p/h Bodyshop Reigate
MET Technician / Strip Fitter / Bodyshop Technician / Mechanical Electrical Trim Technician....Read more...
Welding Production Technician required to join a precision aerospace production team to work in a cleanroom environment on the assembly, integration and testing of aerospace devices.
Our international Aerospace and Defence client is going through a continued period of expansion and looking for Precision Mechanical Assembly Technicians. The ideal candidate will have experience as a Mechanical fitter experience ideally through apprenticeship with exposure to and of the following: non return valves, flow control valves, solenoid valves, cold gas thrusters or any fluidic components for the space industry.
Training and skills development will be provided, extended working hours may be required to meet production targets.
Responsibilities
Precision assembly and test activities in a Class 8 clean room.
Testing the integrity of assembled systems using high pressure gases and leak detection equipment such as helium mass spectrometers.
Cleaning components in preparation for assembly and test activities using automatic particle counting equipment and patch sample counting techniques.
Electrical testing
Gas flow testing of valves, thrusters and fluidic components to ensure components are within
tolerance prior to assembly.
Digital voltmeters, oscilloscopes, data acquisition systems, high voltage dielectric and insulation
resistance test equipment.
Material joining processes including manual TIG (Tungsten Inert Gas) welding, orbital welding, and compiling weld inspection reports on parts and test pieces.....Read more...
Cleanroom Production Technician required to join a precision aerospace production team to work in a cleanroom environment on the assembly, integration and testing of aerospace devices.
Our international Aerospace and Defence client is going through a continued period of expansion and looking for Precision Mechanical Assembly Technicians. The ideal candidate will have experience as a Mechanical fitter experience ideally through apprenticeship with exposure to and of the following: non return valves, flow control valves, solenoid valves, cold gas thrusters or any fluidic components for the space industry.
Training and skills development will be provided, extended working hours may be required to meet production targets.
Responsibilities
Precision assembly and test activities in a Class 8 clean room.
Testing the integrity of assembled systems using high pressure gases and leak detection equipment such as helium mass spectrometers.
Cleaning components in preparation for assembly and test activities using automatic particle counting equipment and patch sample counting techniques.
Electrical testing
Gas flow testing of valves, thrusters and fluidic components to ensure components are within
tolerance prior to assembly.
Digital voltmeters, oscilloscopes, data acquisition systems, high voltage dielectric and insulation
resistance test equipment.
Material joining processes including manual TIG (Tungsten Inert Gas) welding, orbital welding, and compiling weld inspection reports on parts and test pieces.....Read more...
Day-to-Day Tasks
Assist with general site maintenance and improvement projects
Support basic plumbing and electrical installation tasks under supervision
Carry out multi-skilled construction work such as painting, decorating, repairs, and carpentry
Prepare tools, materials, and equipment for construction activities
Help maintain safe and tidy work areas across the site
Support building repairs, minor refurbishments, and facility improvements
Assist with grounds maintenance and outdoor construction work where required
Work alongside the construction tutor on practical site projects
Mentor and support young learners while they take part in practical construction tasks
Encourage safe working, teamwork, and positive behaviour among learners
Help maintain and organise the construction workshop and storage areas
Training Outcome:Full time learning Mentor or teacher.Employer Description:We are a Community Sports club who run an education program for young people aged 13yrs - 18yrs.Working Hours :Monday - Friday, 10:00 - 4pm.Skills: Communication skills,Organisation skills,Non judgemental,Patience....Read more...
Mechanical Fitter required to join a precision aerospace production team to work in a cleanroom environment on the assembly, integration and testing of aerospace devices.
Our international Aerospace and Defence client is going through a continued period of expansion and looking for Precision Mechanical Assembly Technicians. The ideal candidate will have experience as a Mechanical fitter experience ideally through apprenticeship with exposure to and of the following: non return valves, flow control valves, solenoid valves, cold gas thrusters or any fluidic components for the space industry.
Training and skills development will be provided, extended working hours may be required to meet production targets.
Responsibilities
Precision assembly and test activities in a Class 8 clean room.
Testing the integrity of assembled systems using high pressure gases and leak detection equipment such as helium mass spectrometers.
Cleaning components in preparation for assembly and test activities using automatic particle counting equipment and patch sample counting techniques.
Electrical testing
Gas flow testing of valves, thrusters and fluidic components to ensure components are within
tolerance prior to assembly.
Digital voltmeters, oscilloscopes, data acquisition systems, high voltage dielectric and insulation
resistance test equipment.
Material joining processes including manual TIG (Tungsten Inert Gas) welding, orbital welding, and compiling weld inspection reports on parts and test pieces.....Read more...
Cleanroom Production Technician required to join a precision aerospace production team to work in a cleanroom environment on the assembly, integration and testing of aerospace devices.
Our international Aerospace and Defence client is going through a continued period of expansion and looking for Precision Mechanical Assembly Technicians. The ideal candidate will have experience as a Mechanical fitter experience ideally through apprenticeship with exposure to and of the following: non return valves, flow control valves, solenoid valves, cold gas thrusters or any fluidic components for the space industry.
Training and skills development will be provided, extended working hours may be required to meet production targets.
Responsibilities
Precision assembly and test activities in a Class 8 clean room.
Testing the integrity of assembled systems using high pressure gases and leak detection equipment such as helium mass spectrometers.
Cleaning components in preparation for assembly and test activities using automatic particle counting equipment and patch sample counting techniques.
Electrical testing
Gas flow testing of valves, thrusters and fluidic components to ensure components are within
tolerance prior to assembly.
Digital voltmeters, oscilloscopes, data acquisition systems, high voltage dielectric and insulation
resistance test equipment.
Material joining processes including manual TIG (Tungsten Inert Gas) welding, orbital welding, and compiling weld inspection reports on parts and test pieces.....Read more...
Welding Production Technician required to join a precision aerospace production team to work in a cleanroom environment on the assembly, integration and testing of aerospace devices.
Our international Aerospace and Defence client is going through a continued period of expansion and looking for Precision Mechanical Assembly Technicians. The ideal candidate will have experience as a Mechanical fitter experience ideally through apprenticeship with exposure to and of the following: non return valves, flow control valves, solenoid valves, cold gas thrusters or any fluidic components for the space industry.
Training and skills development will be provided, extended working hours may be required to meet production targets.
Responsibilities
Precision assembly and test activities in a Class 8 clean room.
Testing the integrity of assembled systems using high pressure gases and leak detection equipment such as helium mass spectrometers.
Cleaning components in preparation for assembly and test activities using automatic particle counting equipment and patch sample counting techniques.
Electrical testing
Gas flow testing of valves, thrusters and fluidic components to ensure components are within
tolerance prior to assembly.
Digital voltmeters, oscilloscopes, data acquisition systems, high voltage dielectric and insulation
resistance test equipment.
Material joining processes including manual TIG (Tungsten Inert Gas) welding, orbital welding, and compiling weld inspection reports on parts and test pieces.....Read more...
Mechanical Fitter required to join an aerospace production team to work in a cleanroom environment on the assembly, integration and testing of aerospace devices.
Our international Aerospace and Defence client is going through a continued period of expansion and looking for Precision Mechanical Assembly Technicians. The ideal candidate will have experience as a Mechanical fitter experience ideally through apprenticeship with exposure to and of the following: non return valves, flow control valves, solenoid valves, cold gas thrusters or any fluidic components for the space industry.
Training and skills development will be provided, extended working hours may be required to meet production targets.
Responsibilities
Precision assembly and test activities in a Class 8 clean room.
Testing the integrity of assembled systems using high pressure gases and leak detection equipment such as helium mass spectrometers.
Cleaning components in preparation for assembly and test activities using automatic particle counting equipment and patch sample counting techniques.
Electrical testing
Gas flow testing of valves, thrusters and fluidic components to ensure components are within
tolerance prior to assembly.
Digital voltmeters, oscilloscopes, data acquisition systems, high voltage dielectric and insulation
resistance test equipment.
Material joining processes including manual TIG (Tungsten Inert Gas) welding, orbital welding, and compiling weld inspection reports on parts and test pieces.....Read more...
An exciting opportunity has arisen for a Cheshire based Electronics Maintenance Engineer to join this leading provider of electronic design and assembly services.
Based at their site in Cheshire they are seeking an Electronics Maintenance Engineer to be responsible for maintaining a wide variety of high tech assembly equipment along with general infrastructure maintenance.
**This Cheshire based company operate a 4x day working week, Monday to Thursday 7am to 5pm.**
Key skills required for Electronics Maintenance Engineer:
Maintenance of surface mount and associated assembly machinery, including; Juki and Europlacer placement machines; Reflow Ovens, Solder Paste Printers and Automatic Optical Inspection.
Generation of clear and comprehensive maintenance records for traceability purposes.
Liaison with external Service Engineers to arrange site visits to conduct annual service and calibration of machinery.
Maintenance, and supervision of specialist contractors, for building services including heating, electrical, water, compressed air and nitrogen.
Management of test schedules and associated records to meet statutory requirements for specific equipment and infrastructure.
This is a great opportunity for someone to join a growing organisation.
APPLY NOW! Please send your CV to adighton@redlinegroup.Com, or for more information contact Adam on 01582 878821....Read more...
Redline has an extraordinary opportunity for multiple Contract Mechanical Technicians based in Oxfordshire, with a specialist scientific company who are at the forefront of groundbreaking scientific experiments.
This contract will not accept candidates operating via a PSC, therefore you will be required to work via an Umbrella company.
This is a great opportunity to work with technology that you will not find anywhere else in the UK. The company is currently undertaking the biggest project in their history, worth around £500 million and they need you to come on board and help them make it a success.
You will be responsible for the upgrade and installation of existing mechanical units and placing them into racks to fit into a bigger machine.
Key skills required for the Contract Mechanical Technician position based in Oxfordshire:
- Experience in construction, conditioning, testing, installation & commissioning Mechanical Systems
- Experience working in high technology or Ultra High Vacuum environment
- Recognised Apprenticeship in Mechanical or Electrical Engineering discipline, alternatively significant years of experience
For more information or to apply for the Contract Mechanical Technician opportunity based in Oxfordshire, please contact Jack Kelly – jkelly@redlinegroup.Com / 01582 878812 quoting reference JWK1068.....Read more...
Standard days Monday to Friday, Early finish on a Friday for the Assembly Fitter role, 39 hours working week. £27-30k per year DOE, working for a well established company, this organisation specialises vehicles into stronger, purpose-built machines. With over twenty years of experience in vehicle conversions, it provides customised solutions designed to meet specific operational requirements.The Assembly Fitter role is based in Manchester , accessible from Oldham , Stockport, Hyde and Ashton-Under-Lyne .Duties of the Assembly Fitter role:
Using hand tools and power tools
Cutting and preparing materials
Install components including panels, flooring, internal fixtures, and specialist equipment to specification.
Work from technical drawings
Applicants from coachbuilding, kitchen or window fitting, fabrication, cabinet making, Assembly Fitter, vehicle mechanics, electrical work, or general DIY backgrounds are encouraged to apply. More about the Assembly Fitter role:
Permanent contract subject to completion of successful probation period
Early finish on a Friday
39 hours working week, standard days
No weekend work
Competitive hourly rate £13.50-14 DOE
Overtime available paid at an enhanced rate
Development and progression
If you are interested in this Assembly Fitter role , please contact Maisie at E3 Recruitment .....Read more...
An exciting opportunity has arisen for a Facilities Shift Technician, based in the Oldham, Manchester area. You will be joining this world leading high technology engineering company.
They are seeking a Facilities Shift Technician based in Oldham, Manchester to provide support to the Facilities department and production team within a cleanroom manufacturing environment.
The Facilities Shift Technician based in Oldham, Manchester would be working a shift position working a continental shift pattern of 2 on / 2 off / 3 on / 2 off, 2 on / 3 off. This would be on a rotating of days and nights.
The ideal candidate for the Facilities Shift Technician based in Oldham, Manchester should have proven experience working on electro-mechanical preventative maintenance, modification and repair to plant and equipment. In addition to this you will be monitoring and maintaining Gas Detection and BMS systems as well as process cooling, compressed air, vacuum, bulk gas, effluent, heating and electrical systems.
Apply Now! For more information on the Facilities Shift Technician job based in the Manchester area, please send your CV to tdrew@redlinegroup.Com or contact Tom Drew on 01582 878814 quoting reference THD1372. Otherwise, we always welcome the opportunity to discuss other Maintenance jobs on 01582 878848.....Read more...
Redline has been retained by a leading process instrumentation manufacturer who are looking for a Engineering Manager to join their R&D team based in Surrey.
Due to significant growth, they are seeking a Engineering Manager to be responsible for engineering and R&D for highly regulated products. You will manage all engineering deliverables, define and implement the engineering strategy and ensure performance meeting business needs and objectives.
The nature of the industry and products will require someone who is a British Citizen.
Key skills and experience for Engineering Manager job, based in Surrey:
Proven experience leading an Engineering / R&D organisation
Experience in the R&D of mechanical and electronic/electrical products
Proven background in a regulated industry i.E. Defence, Aerospace, Medical, Nuclear etc.
Degree qualified in a related Electronics discipline
Excellent verbal and written communication skills
This is an exciting opportunity to join a growing company who can offer the opportunity for career progression and personal development.
To apply for this Engineering Manager job, based in Surrey, please send your CV to rwilcocks@redlinegroup.Com, or for more information contact Ricky Wilcocks on 01582 8788810 or 07931788834....Read more...
Answer technical enquiries including phone calls and emails
Writing and maintaining datasheets, instruction manuals and technical files for products
Researching and keeping up to date with changes in product legislation and building regulation
Environmental management
Other duties as required by the business and to align with your apprenticeship
Training Outcome:
Having achieved your Level 4, further training options may be available. In addition to this you'll have the opportunity to be part of a fast growing organisation, working withing a growth industry
Employer Description:For 25 years, Green Lighting Ltd (GL) has been a trusted supplier of lighting, safety alarms, renewable solutions, and electrical accessories. We proudly support a wide range of customers from national housebuilders and retrofit specialists to contractors, architects, solar installers, and homeowners. Specialising in designing and manufacturing products that comply with the latest Building Regulations, we ensure our range addresses critical aspects such as energy efficiency, fire safety, and acoustic performance.Working Hours :Monday - Friday, 08:30 - 16:30Skills: Communication skills,IT skills,Attention to detail,Organisation skills,Customer care skills,Administrative skills,Analytical skills,Logical,Team working,Creative,Initiative,Willing to Develop....Read more...
Designing and commissioning production tooling, jigs and fixtures
Learning and being proficient in Solidworks
Learning about materials including Epoxies and Polymers
Reading and producing detailed drawings
Using and interpreting engineering data and documentation such as engineering drawings, technical data and computer-generated programmes
Training:Engineering Manufacturing Technician Level 4.
You will experience a blended learning model.
This programme is delivered via a day release delivery model which means that one day per week, your attendance is required at our Nottingham Trent University (NG18). This attendance is required during term time only.Training Outcome:Expected to become a qualified Manufacturing Engineering Apprentice.Employer Description:Glenair UK Ltd is based in Mansfield, Nottinghamshire, and is a leading manufacturer of specialised electrical harnesses and connector systems used widely throughout the military, aerospace, telecommunications, marine and rail industries.
Glenair invest in our apprenticeship programmes to enable us to grow our very own talent inhouseWorking Hours :Monday to Friday, working hours TBCSkills: Communication skills,Attention to detail,Team working,Work under pressure,Team player,Safety mind-set....Read more...
Workshop Forklift Engineer / Forklift Technician
Location: East Kilbride (Workshop-Based Role)
Salary: Competitive + Overtime Opportunities
Hours: 4045 hours per week | Monday Friday
An exciting opportunity has arisen for a skilled Workshop Forklift Engineer to join a professional engineering team based at a busy workshop in East Kilbride. This role is ideal for an experienced Forklift Engineer, Plant Fitter, or Mechanical Technician who enjoys working in a structured workshop environment preparing equipment to a high standard.
As a Workshop Forklift Engineer, you will be responsible for servicing, repairing, and preparing forklift trucks for rental and used equipment sales. You will ensure all work is completed to the highest engineering standards while maintaining accurate documentation in line with company health & safety and quality procedures.
This is a great opportunity for a hands-on Workshop Forklift Engineer who takes pride in producing high-quality work, enjoys problem-solving, and wants to be part of a supportive engineering team.
Key Responsibilities
As a Workshop Forklift Engineer, your duties will include:
Workshop Maintenance & Repairs: Carry out servicing, maintenance, and repairs on forklift trucks and material handling equipment within the workshop.
FLT Preparation: Prepare forklift trucks to the required standards for STR rental fleet and used equipment sales.
Diagnostics & Fault Finding: Identify and repair mechanical, electrical, and hydraulic faults efficiently.
Parts Management: Order required spare parts and liaise with management for authorisation when required.
Documentation & Systems: Accurately complete service reports and maintain records using internal systems such as K1SS.
Engineering Standards: Ensure all work is completed in accordance with company engineering standards and safe working practices.
Stock & Equipment Control: Maintain accurate stock movement records and ensure company tools and equipment are kept in good working condition.
Team Collaboration: Liaise with workshop management and colleagues to ensure work schedules are completed on time and to the required standards.
Workshop Support: Assist with any additional duties required to ensure the smooth and efficient running of the workshop.
Health & Safety
Health and safety is a key priority within the workshop. As a Workshop Forklift Engineer, you will:
Follow all company Health & Safety, Environmental, and site policies at all times
Maintain a safe and clean working environment
Take responsibility for your own safety and that of colleagues and visitors on site
Ensure all work is completed using approved safe working practices
What Were Looking For
To be successful in this Workshop Forklift Engineer position, candidates should have:
NVQ Level 3 (or equivalent) in a mechanical, electrical, or engineering discipline
Experience working as a Forklift Engineer, Plant Engineer, Plant Fitter, Vehicle Technician, or Mechanical Engineer
Strong mechanical knowledge including hydraulics, electrics, and fault finding
Experience servicing or repairing forklift trucks or similar material handling equipment
The ability to work independently and as part of a team
Strong communication skills when working with colleagues and internal departments
Excellent attention to detail and accuracy in documentation and repairs
A positive, proactive attitude and commitment to delivering high-quality work
Whats on Offer
Competitive salary based on experience
Overtime opportunities
Pension scheme
25 days annual leave plus bank holidays
Ongoing technical training and development
Stable workshop-based role with long-term prospects
Opportunity to work with leading forklift brands and modern equipment
Apply Now
If you are an experienced Workshop Forklift Engineer looking for a stable workshop role with long-term career prospects, we would like to hear from you.
Apply today with your CV to learn more about this Workshop Forklift Engineer opportunity in East Kilbride or reach out to Pete on 07485986178 / peter@holtautomotive.co.uk to ask any questions.
Holt Recruitment Specialising in Plant, Agricultural, Powered Access, Forklift, Lift & Access, Static Plant.
We recruit across the UK for Workshop Forklift Engineer, Forklift Engineer, Forklift Technician, Plant Engineer, Plant Fitter, Material Handling Engineer, Mechanical Engineer, Field Service Engineer, and Maintenance Engineer.
....Read more...
