We are looking for an experienced Ground Support Equipment (GSE) Test Technician. As a GSE Test Technician, you will be responsible for various tasks including hot fire testing of apogee engines, instrumentation of engines, and maintaining and upgrading the firing site.
Key Responsibilities
Conduct hot fire testing of apogee engines.
Instrument engines and maintain firing site.
Support lead Test Engineers for site preparation and maintenance.
Handle propellant sampling, analysis, and testing.
Maintain and operate mechanical and steam vacuum systems.
Calibrate instrumentation and conduct steam boiler maintenance.
Work with and handle flight hardware, including preparation of customer flight engines for test, instrumentation, installation on to the test stand, removal post hot fire test, and subsequent engine decontamination activities.
Requirements
Bachelor's degree in Aerospace Engineering, Mechanical Engineering, or related field.
Previous experience in GSE testing and chemical analysis of propellants.
Proficiency in writing reports and test procedures.
Familiarity with hot fire testing, propellant handling, and pressure systems checks.
Experience with aerospace clean rooms and fuelling operations.
Ability to interpret Piping and Instrumentation Diagrams (P&IDs).
Strong understanding of high-pressure gas and fluidic systems.....Read more...
We are looking for an experienced Ground Support Equipment (GSE) Test Technician. As a GSE Test Technician, you will be responsible for various tasks including hot fire testing of apogee engines, instrumentation of engines, and maintaining and upgrading the firing site.
Key Responsibilities
Conduct hot fire testing of apogee engines.
Instrument engines and maintain firing site.
Support lead Test Engineers for site preparation and maintenance.
Handle propellant sampling, analysis, and testing.
Maintain and operate mechanical and steam vacuum systems.
Calibrate instrumentation and conduct steam boiler maintenance.
Work with and handle flight hardware, including preparation of customer flight engines for test, instrumentation, installation on to the test stand, removal post hot fire test, and subsequent engine decontamination activities.
Requirements
Bachelor's degree in Aerospace Engineering, Mechanical Engineering, or related field.
Previous experience in GSE testing and chemical analysis of propellants.
Proficiency in writing reports and test procedures.
Familiarity with hot fire testing, propellant handling, and pressure systems checks.
Experience with aerospace clean rooms and fuelling operations.
Ability to interpret Piping and Instrumentation Diagrams (P&IDs).
Strong understanding of high-pressure gas and fluidic systems.....Read more...
UPS/Inverter Test Engineer
Location: Clevedon, Somerset
Our client is seeking a skilled and detail-oriented UPS/Inverter Test Engineer to join their growing team. This pivotal role will focus on the testing, inspection, and fault diagnosis of UPS systems, inverters, battery tripping units, and related power equipment. You will ensure that all equipment meets rigorous quality standards and customer specifications, contributing directly to product performance and reliability.
Key Responsibilities for the UPS/Inverter Test Engineer job based in Clevedon, Somerset:
Testing and inspecting Battery Tripping Units, Inverters, and UPS Systems.
Performing capacity testing on batteries and FATs (Factory Acceptance Tests) to customer specifications.
Testing both manufactured and bought-in equipment to agreed internal standards.
Conducting fault finding down to component level on both through-hole and surface mount PCBs.
Maintaining and calibrating test equipment in line with company and industry standards.
Evaluating both new and existing equipment to ensure performance and compliance.
Supporting the development and documentation of testing standards and procedures.
Participating in cross-functional troubleshooting and contributing to root cause analysis and resolution.
Providing detailed feedback to Design and Engineering teams, participating in design review meetings.
Ensuring high quality standards are met and all relevant documentation is maintained.
Qualifications and Experience Required for this UPS/Inverter Test Engineer job based in Clevedon, Somerset:
Proven experience in testing UPS systems, inverters, or similar power electronic equipment.
Strong fault-finding skills, including down to component level on PCBs.
Experience in conducting FATs and capacity testing on batteries is highly desirable.
Familiarity with using test equipment such as oscilloscopes, multimeters, load banks, and signal generators.
Understanding of industry standards and quality control processes.
A qualification in Electrical or Electronic Engineering is preferred.
Excellent problem-solving and communication skills with a proactive attitude.
This is an exciting opportunity to join an established and innovative company at the forefront of power electronics and system reliability.
If you have the skills and experience and are ready to take the next step in your career, we’d love to hear from you!
Please send your CV to NDrain@redlinegroup.Com or call 07487 756328 to speak with Nick for more information.....Read more...
Position: Position: Field Service Engineer / Service Technician / Generator Technician
Job ID: 1799/63
Location: Kent (and surrounding areas)
Rate/Salary:£32,000 - £40,000 + Overtime
Type: Permanent / Full Time
Benefits: Company van, mobile phone, and laptop
Competitive salary and benefits reflecting skills and experience
Ongoing training and career development opportunities
Enhanced holiday entitlement
Gym and fitness privileges
Health and well-being benefits, including on-demand GP services
Employee retail discount schemes
HSB Technical Ltd is a specialist recruiter within the Power & Propulsion, Shipbuilding, Maritime Shipping, Energy and Subsea sectors – visit: www.hsbtechnical.com for a list of our vacancies. We have a number of permanent and contract vacancies for multiple businesses across the UK and overseas.
The below job description will outline this position of: Field service engineer (generators)
This Field Service Engineer / Service Technician / Generator Technician position involves preventive maintenance, fault diagnosis, testing, and repairs on generators, UPS systems, control systems, and other critical power equipment. Responsibilities include load bank testing, site surveys, inspections, installation, and commissioning of power systems, as well as deploying temporary or hire equipment on customer sites. Travel around the Kent area will be required.
HSB Technical’s client is an established and well-regarded business entity.
Duties and responsibilities of the Field service engineer (generators) :
Perform preventive maintenance, fault diagnosis, testing, and repairs on generators, UPS, control systems, and related equipment
Conduct load bank testing, site surveys, and inspections of critical power systems
Assist with the installation and commissioning of various critical power equipment
Install temporary or hire equipment, including generator sets and UPS, on customer sites
Plan, schedule, and oversee onsite work, ensuring safety compliance and risk assessments are carried out
Qualifications and requirements for the (insert job title):
Experience working on generators or other critical power equipment, or in a similar engineering environment
Engineering qualification (NVQ Level 3, City & Guilds, or equivalent) – desirable
Full UK driving license
Ability and willingness to travel across the Kent area
This vacancy is being advertised by HSB Technical Ltd who have been appointed to act as a recruitment partner for this role.....Read more...
Software Development company requires an Automated Test contractor to join their team ensuring Continuous Integration processes and systems are in place to assure quality both at code and application level.
Essential experience:
Agile
Design test strategies and test automation techniques
Automated test development and scripts for regression testing.
Continuous Integration (CI) and Continuous Delivery (CD) ideally with VSTS builds.
Python, MS Build scripting and developing open source test tools / frameworks.
Testing complex applications
Managing test data necessary for the test plan.
Software testing in the Cloud
The ideal candidate will also have an awareness of software architecture, coding or scripting languages.....Read more...
Software Development company requires an Automated Test contractor to join their team ensuring Continuous Integration processes and systems are in place to assure quality both at code and application level.
Essential experience:
Agile
Design test strategies and test automation techniques
Automated test development and scripts for regression testing.
Continuous Integration (CI) and Continuous Delivery (CD) ideally with VSTS builds.
Python, MS Build scripting and developing open source test tools / frameworks.
Testing complex applications
Managing test data necessary for the test plan.
Software testing in the Cloud
The ideal candidate will also have an awareness of software architecture, coding or scripting languages.....Read more...
Senior Software Test Engineer required to join a large Software Development team with extensive source code control and build deployment processes to Design test strategies and test automation techniques.
Essential skills:
Agile
Champion processes and systems that encourage quality both at code at application level
Understand, modify and maintain different levels of automation test pyramid
Pair programming, Test Driven Development (TDD), Behaviour-Driven Development (BDD), Continuous Integration (CI), Continuous Delivery (CD)
Open source test tools and test frameworks
Utilise suitable test tools for project requirements
Experience testing complex applications
Non-functional testing experience e.g. performance, security
Development for the Cloud
Testing Cloud native applications built on a microservice architecture....Read more...
Senior Software Test Engineer required to join a large Software Development team with extensive source code control and build deployment processes to Design test strategies and test automation techniques.
Essential skills:
Agile
Champion processes and systems that encourage quality both at code at application level
Understand, modify and maintain different levels of automation test pyramid
Pair programming, Test Driven Development (TDD), Behaviour-Driven Development (BDD), Continuous Integration (CI), Continuous Delivery (CD)
Open source test tools and test frameworks
Utilise suitable test tools for project requirements
Experience testing complex applications
Non-functional testing experience e.g. performance, security
Development for the Cloud
Testing Cloud native applications built on a microservice architecture....Read more...
We are seeking an experienced and dedicated Electrical Testing Engineer to join our team. The successful candidate will perform both static and dynamic electrical tests on a wide range of equipment, from Low Voltage (LV) to High Voltage (HV) systems. This role demands a proactive individual who prioritizes safety, quality, and customer service in every task.
Key Responsibilities:
Conduct static and dynamic electrical tests on rotating plant systems from LV to HV.
Oversee and maintain electrical test records and reports to the highest standards.
Maintain company brand materials and working spaces, ensuring they are kept to high standards.
Deliver outstanding customer service by addressing enquiries and assisting with any customer complaints.
Qualifications, Experience and Personal Attributes:
A Higher National Certificate (HNC) in Electrical Engineering is preferred.
Proven experience working with large rotating plant systems.
Extensive knowledge of motor and generator testing methods, including static and dynamic loading.
Strong fault-finding and problem-solving abilities.
Excellent communication skills and a commitment to maintaining high safety and quality standards.....Read more...
An exciting opportunity for an experienced Senior RF Design Engineer to join a leading technology and engineering company specialising in advanced communication and defence systems. You will play a key role in designing and developing high-performance RF systems used across defence, aerospace, and critical infrastructure sectors.
Key Responsibilities
Design and develop RF systems, including transmitters, receivers, filters, and amplifiers.
Work on schematic capture, PCB layout, and RF simulation (Altium and similar tools).
Support product testing, troubleshooting, and design verification.
Collaborate with multi-disciplinary engineering teams throughout the product lifecycle.
Mentor junior engineers and contribute to continuous process improvement.
Key Skills
Proven experience in RF design and development (amplifiers, filters, or transceivers).
Strong knowledge of RF simulation tools and PCB design software.
Practical experience testing and troubleshooting prototypes.
Degree in Electronics, Electrical Engineering, or equivalent.
Eligible for UK Security Clearance (British Citizenship required).
Why Join
Competitive salary and bonus structure.
Hybrid working and career development opportunities.
Work on cutting-edge technology that supports national security and innovation.....Read more...
We are seeking an experienced and dedicated Electrical Testing Engineer to join our team. The successful candidate will perform both static and dynamic electrical tests on a wide range of equipment, from Low Voltage (LV) to High Voltage (HV) systems. This role demands a proactive individual who prioritizes safety, quality, and customer service in every task.
Key Responsibilities:
Conduct static and dynamic electrical tests on rotating plant systems from LV to HV.
Oversee and maintain electrical test records and reports to the highest standards.
Maintain company brand materials and working spaces, ensuring they are kept to high standards.
Deliver outstanding customer service by addressing enquiries and assisting with any customer complaints.
Qualifications, Experience and Personal Attributes:
A Higher National Certificate (HNC) in Electrical Engineering is preferred.
Proven experience working with large rotating plant systems.
Extensive knowledge of motor and generator testing methods, including static and dynamic loading.
Strong fault-finding and problem-solving abilities.
Excellent communication skills and a commitment to maintaining high safety and quality standards.....Read more...
An exciting opportunity for an experienced Senior RF Design Engineer to join a leading technology and engineering company specialising in advanced communication and defence systems. You will play a key role in designing and developing high-performance RF systems used across defence, aerospace, and critical infrastructure sectors.
Key Responsibilities
Design and develop RF systems, including transmitters, receivers, filters, and amplifiers.
Work on schematic capture, PCB layout, and RF simulation (Altium and similar tools).
Support product testing, troubleshooting, and design verification.
Collaborate with multi-disciplinary engineering teams throughout the product lifecycle.
Mentor junior engineers and contribute to continuous process improvement.
Key Skills
Proven experience in RF design and development (amplifiers, filters, or transceivers).
Strong knowledge of RF simulation tools and PCB design software.
Practical experience testing and troubleshooting prototypes.
Degree in Electronics, Electrical Engineering, or equivalent.
Eligible for UK Security Clearance (British Citizenship required).
Why Join
Competitive salary and bonus structure.
Hybrid working and career development opportunities.
Work on cutting-edge technology that supports national security and innovation.....Read more...
Work across all stages of the software development lifecycle, from planning and design to testing, deployment, and maintenance.
Write clear, logical, and maintainable code that meets project specifications and coding standards.
Use version control systems to manage and store code safely.
Help fix bugs and support the maintenance of existing software systems.
Take part in different types of testing, such as unit, integration, and end-to-end testing.
Follow secure coding practices to protect software from security risks.
Connect code to data sources to ensure software functions correctly.
Communicate and work with team members, stakeholders, and customers, and help create technical documents like user stories and design diagrams.
Training:As a Software Developer apprentice, your role will consist of creating and testing high-quality code. You will use programming languages and software development tools such as Java, Python, and C++.
You will be responsible for interpreting customer requirements from a design specification, planning and managing their contribution to the wider project, and creating effective software solutions.
Due to the nature of the role, you could be employed within a wide range of businesses and sectors – from SME games studios to finance multinationals. All corporations depend on software in some way to function!Training Outcome:This apprenticeship provides you with the skills to become a fully fledged software developer.Employer Description:OSL Technology is looking for an enthusiastic and motivated individual to begin their career in software development. The company designs and develops cutting-edge software that powers security systems across airports, defence sites, and critical infrastructure. Their technology combines AI, smart sensors, and data analytics to keep people and places safe, and they are now looking for the next generation of developers to join the team.Working Hours :9am-6pm Monday to FridaySkills: Communication skills,IT skills,Attention to detail,Logical....Read more...
Work across all stages of the software development lifecycle, from planning and design to testing, deployment, and maintenance.
Write clear, logical, and maintainable code that meets project specifications and coding standards.
Use version control systems to manage and store code safely.Help fix bugs and support the maintenance of existing software systems.
Take part in different types of testing, such as unit, integration, and end-to-end testing.
Follow secure coding practices to protect software from security risks.
Connect code to data sources to ensure software functions correctly.
Communicate and work with team members, stakeholders, and customers, and help create technical documents like user stories and design diagrams.
Training:As a Software Developer apprentice, your role will consist of creating and testing high-quality code. You will use programming languages and software development tools such as Java, Python, and C++.
You will be responsible for interpreting customer requirements from a design specification, planning and managing their contribution to the wider project, and creating effective software solutions.
Due to the nature of the role, you could be employed within a wide range of businesses and sectors – from SME games studios to finance multinationals. All corporations depend on software in some way to function!Training Outcome:This apprenticeship provides you with the skills to become a software developer.Employer Description:OSL Technology is looking for an enthusiastic and motivated individual to begin their career in software development. The company designs and develops cutting-edge software that powers security systems across airports, defence sites, and critical infrastructure. Their technology combines AI, smart sensors, and data analytics to keep people and places safe, and they are now looking for the next generation of developers to join the team.Working Hours :Monday - Friday between 9am-6pmSkills: Communication skills,IT skills,Organisation skills,Analytical skills,Logical,Team working....Read more...
Test Analyst
Location: Lymington, Hampshire Salary: Up to 32k. Working Arrangement: Full-time on-site for initial 6 weeks, then hybrid/remote
A leading Marina Operator based in Lymington is seeking a Test Analyst to join their dynamic in-house software development team. This is a fantastic opportunity to contribute to the evolution of a bespoke ERP SaaS application that underpins operations across a growing national network of marinas.
As Test Analyst, you’ll play a pivotal role in ensuring the quality and reliability of their digital platforms through automated testing, working closely with developers and stakeholders to deliver robust, scalable solutions.
Key Responsibilities
Design, develop, and execute automated test scripts for web-based ERP systems
Collaborate with developers and business analysts to define test strategies and acceptance criteria
Identify, document, and track defects using appropriate tools
Support continuous integration and deployment processes
Contribute to the overall improvement of testing frameworks and QA practices
Skills & Experience
Experience in automated testing
Experience of working with work item tracking systems (Jira / Azure DevOps)
Strong understanding of software development lifecycle and Agile methodologies
Experience testing SaaS or ERP platforms highly desirable
Excellent communication and problem-solving skills
ISTQB certification (or equivalent) is required.
Must be eligible to work in the UK.
Paying up to 32k, depending on experience. ....Read more...
Electronics Test Engineer
Location: Horsham, West Sussex
Salary: £35,000 £40,000 per annum
Hours: Full-time, Monday to Friday, onsite
The Role We are seeking a skilled Test Engineer to join the Test Department of a leading technology business in Horsham. Reporting to the Test Engineering Manager, you will be responsible for testing electroâopticalâmechanical components, sub-assemblies, and complete systems, ensuring accuracy of results, diagnosing faults, and supporting the wider engineering team in resolving production or design issues.
This is an exciting opportunity for someone with strong hands-on electrical/electro-mechanical test expertise to contribute to developing high-quality, cutting-edge products in a collaborative engineering environment.
Key Responsibilities
- Carry out Factory Acceptance Tests (FATs) using standard test equipment (power supplies, oscilloscopes, digital multi-meters).
- Assist in the creation of comprehensive test procedures and FAT documentation.
- Fault-find across a wide range of electromechanical equipment.
- Communicate effectively with both technical and non-technical colleagues.
- Ensure compliance with quality processes, ISO9001 standards, and company policies.
- Maintain accurate test documentation and reporting.
- Contribute to continuous improvement of test processes and facilities.
- Support field service activities when required.
- Maintain a safe, clean, and well-organised workshop and office environment.
Skills & Experience
Essential:
- Strong knowledge of testing electrical and electro-mechanical systems.
- Ability to write and execute test plans and FATs for new product launches.
- Competent in reading technical drawings, wiring diagrams, and PCB schematics.
- Ability to support wider production and quality teams where needed.
- HNC or equivalent qualification in Electronics Engineering.
- Hands-on experience in manual testing and integration.
- Computer literate with experience in Microsoft Word & Excel.
Desirable:
- PCB testing and fault-finding experience.
- Familiarity with digital camera and video protocols.
- Knowledge of automated test software.
- Awareness of communication protocols and networking.
- Experience in PLC programming, CAD packages.
To find out more please contact Max Sinclair max@holtengineering.co.uk or hit apply!....Read more...
A great opportunity for a Mechanical Design Engineer to join a growing engineering team working on advanced flight simulator hardware. Youll be contributing to the design and development of high-fidelity training systems used by pilot training organisations worldwide.
In this role, youll be involved in developing mechanical and electromechanical systems, producing detailed models and drawings, supporting testing and validation, and working closely with cross-functional teams to deliver high-quality, safety-critical hardware. This is a fast-paced environment where ownership, agility, and collaboration are key.
What youll be doing
- Designing mechanical and electromechanical hardware for next-generation flight simulators
- Producing detailed 3D models, drawings, and specifications using industry-standard CAD tools
- Working with systems, software, and project teams to deliver integrated solutions
- Ensuring compliance with aerospace standards and supporting testing/validation
- Contributing to continuous improvement and evaluating new tools and technologies
- Supporting supplier management and component integration
- Providing technical leadership or mentoring depending on seniority
What were looking for
- Degree in Mechanical Engineering (or related field)
- Experience in mechanical/electromechanical hardware development
- Strong CAD skills (experience with Creo/Pro-E or CATIA V5 is a big plus)
- Experience with structural analysis/FEA tools (NASTRAN, Ansys, Abaqus welcomed)
- Familiarity with PLM systems (Windchill, Teamcenter)
- Understanding of aerospace mechanical/electrical standards
- Strong problem-solving skills and experience with testing/validation
- Comfortable working in multi-disciplinary teams
- Experience in flight simulation, aerospace, automotive, wind energy, or similar industries is an advantage
Benefits
- Pension matched up to 7%
- 25 days annual leave + bank holidays (increasing with service)
- Private Medical Insurance
- Life Assurance (4x salary)
- Group Income Protection
- Employee Assistance Programme (24/7 support)
- Digital GP access
- Holiday buy/sell scheme (up to 5 days)
- Retail, travel & leisure discounts
- Onsite parking with EV charging
If youre looking to work on meaningful, technically challenging projects within a collaborative engineering environment, this could be a great next step.
TT....Read more...
Test Engineer – A Growing FinTech - Linz, Austria
(Tech stack: Test Automation, Test Design, Test Management, Selenium, Postman, JIRA, ISTQB, Agile, V-Model, Scrum, CI/CD, Test Reporting, Quality Assurance, Regression Testing, UAT, Jenkins, Test Strategy, Functional Testing, Non-functional Testing, API Testing, Software QA)
Headquartered in Linz, our client is redefining the future of FinTech, building next-generation solutions that blend AI and cloud computing to revolutionise financial services. Their cutting-edge platform enables real-time payments, automated wealth management, and embedded finance, empowering businesses to provide seamless, data-driven financial experiences. With a team of top-tier engineers, they are pushing the boundaries of digital transactions and decentralized finance.
As they expand their operations, they are looking for a Test Engineer to ensure the highest quality of their innovative products, develop and drive a robust testing framework, and play a key role in delivering secure, reliable financial systems.
Our client is looking for passionate Test Engineer candidates with experience in some or all of the following (full training will be provided to fill any gaps in your skill set): Test Automation, Test Design, Test Management, Selenium, Postman, JIRA, ISTQB, Agile, V-Model, Scrum, CI/CD, Test Reporting, Quality Assurance, Regression Testing, UAT, Jenkins, Test Strategy, Functional Testing, Non-functional Testing, API Testing, Software QA.
All Test Engineer positions come with the following benefits:
Shares in the company.
Pension scheme (8%).
3 hours ‘free time’ each week to investigate new technologies.
27 days holiday (excluding Public Holidays) plus your birthday off.
Flexible working hours.
Location: Linz, Austria/ Hybrid Working
Salary: €50,000 - €70,000 + Pension + Benefits
Applicants must be based in Austria and have the right to work in Austria even though remote working is available.
NOIRAUSTRIAREC
NOIREUROPEREC
NOIREURNET....Read more...
A leading global technology company in the energy sector is seeking a Mechanical Assembly Test Engineer to join its on-site operations team in Cumbria.
In this role, you will be responsible for performing a range of technical and mechanical tasks to support production, assembly, and testing processes. You will contribute to maintaining high-quality standards and continuous improvement across manufacturing operations.
Key Responsibilities
Perform technical duties across mechanical, electronic, and system-based projects.
Conduct testing, measurements, and process controls on key production lines.
Read and interpret engineering drawings and job documentation ( work orders, bills of materials).
Troubleshoot and repair product or process issues.
Maintain tools, machinery, and equipment to ensure operational efficiency.
Support continuous improvement using modern manufacturing principles.
Key Skills:
Hands-on experience in mechanical assembly, testing, or manufacturing environments.
Ability to read blueprints and perform precision tasks such as wire preparation, crimping, and harness termination.
Familiarity with hydraulic, electronic, and mechanical systems.
Strong problem-solving and diagnostic skills.....Read more...
A leading global technology company in the energy sector is seeking a Mechanical Assembly Test Engineer to join its on-site operations team in Cumbria.
In this role, you will be responsible for performing a range of technical and mechanical tasks to support production, assembly, and testing processes. You will contribute to maintaining high-quality standards and continuous improvement across manufacturing operations.
Key Responsibilities
Perform technical duties across mechanical, electronic, and system-based projects.
Conduct testing, measurements, and process controls on key production lines.
Read and interpret engineering drawings and job documentation ( work orders, bills of materials).
Troubleshoot and repair product or process issues.
Maintain tools, machinery, and equipment to ensure operational efficiency.
Support continuous improvement using modern manufacturing principles.
Key Skills:
Hands-on experience in mechanical assembly, testing, or manufacturing environments.
Ability to read blueprints and perform precision tasks such as wire preparation, crimping, and harness termination.
Familiarity with hydraulic, electronic, and mechanical systems.
Strong problem-solving and diagnostic skills.....Read more...
Electrician – FM Service Provider – London (Foot Mobile) – £50,000 to £56,000 Exciting opportunity to work for an established FM service provider situated in London. CBW are currently recruiting for an Electrician to work across seven high-end residential buildings mainly around the Canary Wharf area. The successful candidate will have proven experience in electrical building services, including PPMs, remedial works, fault-finding and general electrical maintenance. Although a Gold Card or 2391 Testing qualification is not essential, both are highly preferred. In return, the company is offering a competitive salary of up to £56,000, overtime, and further technical training. Package & Working Hours£50,000 – £56,000 (depending on experience)Overtime available Working hours: 7.30 – 17.00 Mon – Thur & 7.30 – 16.00 Fridays£160 a month travel allowance25 days holiday + bank holidaysFurther electrical training and developmentCompany pensionKey ResponsibilitiesCarrying out electrical PPMs across building systems.Completing all remedial works identified through PPMs.Undertaking routine electrical testing and inspection (with significant testing planned for 2026).Attending call-outs and troubleshooting electrical faults.Participating in a 1-in-3 call-out rota after settling into the role.Servicing and maintaining a range of electrical and associated systems including:ATS (Automatic Transfer Switch) serviceTrace heating serviceBack-up generator checks/serviceEnvironmental & extraction fan servicesDistribution board serviceGeneral electrical maintenance duties such as lighting repairs, small installations, socket/switch replacements, and fault finding.Providing clear service reports and communicating recommendations.RequirementsElectrically qualified - City & Guilds Level 2&3 (Required)18th Edition (Required)Must be able to provide copies of your trade certificatesGold Card or 2391 Testing qualification preferred but not essential.Proven electrical background within building services.Experience carrying out electrical PPMs, repairs and fault-finding.Knowledge of electrical building services plant, safety systems, and distribution boards.Strong problem-solving abilities and ability to work independently.Excellent communication and customer-facing skills.If you are interested in this role please contact Alex Denton from CBW Staffing Solutions!....Read more...
Utilising engineering drawings, data and documentation in order to undertake the measuring, diagnosing & verification of technical performance on a wide range of electrical and electronic assemblies and components
This covers sensors, automatic voltage regulators, wiring harnesses and other bespoke assemblies
Gaining knowledge and expertise in the use of a wide range of common and specialist measuring and diagnostic testing equipment such as Digital Multimeters, Oscilloscopes, and other Automated Testing Equipment, in order to follow a technical testing specification and process to ensure individual components and assemblies meet the required specification.
Training:An apprenticeship includes regular training with a college or other training organisation. At least 20% of your working hours will be spent training or studying.Training Outcome:Approximately 95% of apprentices choose to stay on with us. As a global business there are a world of opportunities – whether you decide to stay in the UK, or explore an overseas role.Employer Description:At BAE Systems, we provide some of the world’s most advanced, technology-led defence, aerospace and security solutions. We employ a skilled workforce of more than 93,000 people in around 40 countries. Working with customers and local partners, we develop, engineer, manufacture, and support products and systems to deliver military capability, protect national security, and keep critical information and infrastructure secure.Working Hours :Shifts to be confirmed.Skills: Communication skills,Team working,Creative....Read more...
Our client is a global renewable energy company and one of Europe’s largest independent power producers. They develop, build and operate a diversified portfolio of clean-energy assets, including wind, solar, and energy storage to supply reliable, affordable renewable power while minimising environmental impact. They integrate sustainability and community engagement into every project, supporting social, ecological and local-economic value beyond just electricity generation. The Electrical Reliability Engineer is responsible for ensuring the optimal performance, safety, and longevity of electrical infrastructure including Balance of Plant, wind farms and PV installations) across the Italian fleet. This role involves ensuring the reliability, efficiency, and safety of electrical systems, collaborating with multidisciplinary teams, and contributing to various projects from inception through to completion. Responsibilities: Design & Development:Lead or support the design and specification of new or upgraded electrical systems, ensuring reliability and safety compliance.Collaborate with engineering and project teams to integrate reliability principles into new assets and retrofits.Evaluate and recommend technologies that improve electrical performance and reduce lifecycle costs.Contribute to the standardisation of electrical designs and components to streamline maintenance and spare-parts management.Ensure all designs meet applicable Italian and international electrical codes and internal engineering standards.Support the development of technical documentation, including schematics, wiring diagrams, and system specifications. Project Management and Implementation:Manage and oversee electrical projects, ensuring they are completed on time, within budget, and to the required standards.Coordinate with other internal departments, contractors, and stakeholders to ensure successful project execution.Perform site inspections and supervise the installation and testing of electrical systems.Manage contacts and coordinate preventive and reactive maintenance activities with electrical suppliers. Testing and troubleshooting:Conduct tests and inspections to ensure the functionality and safety of electrical systems.Commission electrical systems and troubleshoot any issues that arise during testing.Develop and implement maintenance and testing procedures.Analyse test results to detect anomalies, degradation, or early signs of failure, and recommend corrective actions.Lead troubleshooting efforts for complex electrical issues, coordinating with maintenance teams to ensure timely resolution and minimal operational disruption.Utilize advanced testing tools and techniques such as insulation resistance testing, thermographic imaging, and power quality analysis.Document findings, root causes, and repair actions to support continuous improvement and knowledge sharing across the fleet. Compliance and Documentation:Ensure all electrical systems and maintenance activities comply with relevant Italian and EU regulations, industry standards, and internal policies.Maintain accurate and up-to-date documentation, including inspection reports, test results, maintenance records, and engineering drawings.Support audits and regulatory inspections by providing required technical documentation and evidence of compliance.Develop and update standard operating procedures (SOPs), work instructions, and reliability guidelines to reflect best practices and regulatory changes.Promote a culture of compliance and accountability across the fleet by reinforcing adherence to safety and quality standards.Manage the institutional relationship with the DSOs the TSO (Terna) and the electrical regulator (ARERA). Continuous Improvement:Identify and implement opportunities to enhance the reliability, efficiency, and maintainability of electrical systems across the fleet.Analyse failure data, maintenance trends, and performance metrics to drive data-informed improvements.Lead or participate in cross-functional initiatives aimed at reducing downtime, optimizing maintenance strategies, and extending asset life.Promote a culture of continuous improvement by sharing lessons learned, best practices, and innovative solutions with engineering and maintenance teams.Support the integration of new technologies and digital tools that enhance predictive maintenance and system diagnostics. RequirementsMinimum of 3-5 years of experience in electrical engineering or a related field.Bachelor’s degree in electrical engineering or a related field. A Master’s degree is preferred. Professional Engineer (PE) license is highly desirable.Relevant certifications in electrical engineering are an advantage.Fluent in Italian and proficient in English.Proven experience in designing, implementing, and maintaining electrical systems.Experience in managing electrical projects from concept to completion.Desirable proficiency in electrical design software (e.g., AutoCAD Electrical, ETAP).Strong understanding of electrical systems, components, and design principles.Knowledge of safety standards, codes, and regulations related to electrical engineering.Ability to interpret and create technical drawings and specifications.Knowledge of Italian and EU electrical safety regulations.Competencies in analytical thinking, problem solving, attention to detail, collaboration, communication, adaptability, initiative, safety & IntegrityThis position may require regular travel to several sites for inspections, maintenance, and troubleshooting.Ability to travel domestically and potentially internationally as needed.About Us Climate17 is a purpose-led, international Renewable Energy & Sustainability recruitment firm. We provide specialist talent acquisition services to organisations seeking to reduce their environmental footprint, as well as those working towards the decarbonisation of the energy sector. Inclusive Application Process Climate17 is committed to creating a diverse, inclusive and equitable workplace. We believe there is no solution to climate change without people. We aim to increase diversity across all areas and as such, we are committed to partnering with clients and candidates to create an inclusive and sustainable regenerative world.....Read more...
Electrician – FM Service Provider – London (Foot Mobile) – £50,000 to £56,000 Exciting opportunity to work for an established FM service provider situated in London. CBW are currently recruiting for an Electrician to work across seven high-end residential buildings mainly around the Canary Wharf area. The successful candidate will have proven experience in electrical building services, including PPMs, remedial works, fault-finding and general electrical maintenance. Although a Gold Card or 2391 Testing qualification is not essential, both are highly preferred. In return, the company is offering a competitive salary of up to £56,000, overtime, and further technical training. Package & Working Hours£50,000 – £56,000 (depending on experience)Overtime available Working hours: 7.30 – 17.00 Mon – Thur & 7.30 – 16.00 Fridays£160 a month travel allowance25 days holiday + bank holidaysFurther electrical training and developmentCompany pensionKey ResponsibilitiesCarrying out electrical PPMs across building systems.Completing all remedial works identified through PPMs.Undertaking routine electrical testing and inspection (with significant testing planned for 2026).Attending call-outs and troubleshooting electrical faults.Participating in a 1-in-3 call-out rota after settling into the role.Servicing and maintaining a range of electrical and associated systems including:ATS (Automatic Transfer Switch) serviceTrace heating serviceBack-up generator checks/serviceEnvironmental & extraction fan servicesDistribution board serviceGeneral electrical maintenance duties such as lighting repairs, small installations, socket/switch replacements, and fault finding.Providing clear service reports and communicating recommendations.RequirementsElectrically qualified - City & Guilds Level 2&3 (Required)18th Edition (Required)Must be able to provide copies of your trade certificatesGold Card or 2391 Testing qualification preferred but not essential.Proven electrical background within building services.Experience carrying out electrical PPMs, repairs and fault-finding.Knowledge of electrical building services plant, safety systems, and distribution boards.Strong problem-solving abilities and ability to work independently.Excellent communication and customer-facing skills. If you are interested in this role please contact Charlie Long from CBW Staffing Solutions!....Read more...
Electronic and Mechanical Senior or Principal Test Engineer required to design, build and develop a range of automated test processes for optical sensors including their test, calibration and characterisation.
Key Skills
Optical sensing
Optoelectronics or fibre optics
Strong degree or PhD in a relevant field such as Physics, Optics, Engineering etc.
Significant experience in Optical test environment
Data acquisition and processing using National Instruments Labview Product and compliance testing
Project Management or Line Management would also be ideal
Role responsibilities
Product testing from component level to product from prototype through the manufacturing process and final product test.
Data analysis, interpretation and presentation of recommendations.
Design and development of pressure, temperature and acoustic test processes for optical systems.....Read more...
