The Mechanical Manufacturing Engineer is responsible for complex electronic assemblies. Performing the lead role in implementing manufacturing processes and techniques using LEAN and Six Sigma tools.
Experience
Min BSc or BEng in Mechanical, Industrial Engineering (or similar)
Manufacturing especially Electronic assembly
Lean and Six Sigma
Production Workflow
Non-Conformance Management
Technical Investigation Support
Production Test and Assembly
Manufacturing Resource Planning System
Responsibilities
Lean Six Sigma
Responsible for the implementation of key elements of Lean, such as: standardized work instructions, line balancing, layout and work sequence (routing) optimization, training development matrix, Value Stream Mapping, Kaizen/5S workouts, pull processes, TPM (total preventive maintenance), cell design, and quick changeover/batch-size optimization.
Processes
Implement process improvements to achieve manufacturing excellence in areas such as process yield (e.g. First Pass Yield, Rolled Throughput Yield), cycle time reduction and productivity.
Provide shop floor feedback on product design and manufacturability issues to Engineering and DFMs (e.g. through the use of Engineering Change Requests - ECRs).
Review and sign-off on Engineering Change Orders that impact Inventory - including product life cycle issues, obsolescence, etc.
Creates, implements, and monitors key performance indicators and metrics on manufacturing process capability and product quality.
Monitoring and reducing process costs.
Quality
Responsible to assist with investigation, root cause analysis and corrective action implementation for manufacturing quality issues.....Read more...
As our next FAIRs Inspector / Engineer, you’ll play a key role in driving First Article Inspections and producing accurate, compliant FAIRs packages that support production.This isn’t just a documentation role. You’ll be hands-on- working closely with production, quality, suppliers, and customers to ensure FAIRs processes are consistent, efficient, and right first time.You’ll be responsible for carrying out inspections, compiling FAIRs documentation, supporting corrective actions, engaging with stakeholders, and occasionally visiting suppliers. Deadlines can be tight, so a calm, methodical approach is essential.This role suits someone who understands the bigger picture—someone who can work collaboratively, influence where needed, and bring structure and consistency to FAIRs processes without creating unnecessary friction.Key Requirements
Minimum 3 years’ FAIRs experience within aerospace manufacturingFirm understanding of GD&T and technical drawingsWorking knowledge of AS9102Ability to compile complete FAIRs packages within an engineering environment
You’ll understand the pressures of production while still upholding quality standards. There’s real scope here to shape and improve how FAIRs are delivered across the business.We trust our people to take ownership and make a difference. You’ll be given the autonomy to build a robust, consistent FAIRs approach within the quality team.Benefits
25 days holidayHalf day finish on FridaysRural location with a strong working environment
Next StepApply, and you’ll receive a response within 24 hours.....Read more...
Facilities Engineer required for a high tech Aerospace manufacturing site to perform building and equipment maintenance, corrective repairs and modifications to the Production Plant.
You will be responsible for applying fixes to productive equipment in an office environment and precision engineering Research and design facility containing hazardous chemicals and high pressure gas systems.
The ideal candidate will have a very practical attitude and experience of building maintenance tasks in various fields, e.g. carpentry, electrical, HVAC (heating, ventilation, and air conditioning), plumbing, compressor and boiler maintenance, site vehicle upkeep, machine shop fabrication including welding.
You will have
Plumbing, carpentry and fabrication experience.
Hand and electrical tools understanding.
Machine shop equipment knowledge, lathes, band / chop saws, pillar drills, grinders etc.
Welding and fabrication skills, City and Guilds Level 2 minimum, Level 3 preferred, or similar structural welding qualification. ASME certification would be an advantage.
Basic working knowledge of PC applications, such as use of Word and Excel.
Experience in a facilities maintenance or engineering fabrication environment.
Role will involve
General site fixes, repairs and maintenance activities.
Installing new appliances and equipment.
Site project works, such as new test and productions facilities installations and commissioning.
Fabrication and welding.
Liaising with, arrange and managing external contractors.
Inspecting, maintaining and troubleshooting equipment and systems (e.g. ventilation).
Check site control panels and electrical wiring to identify issues.
Provide and assemble office and production area furniture, shelving, racking, as required.
Upkeep of site vehicles. ....Read more...
Facilities Engineer required for a high tech Aerospace manufacturing site to perform building and equipment maintenance, corrective repairs and modifications to the Production Plant.
You will be responsible for applying fixes to productive equipment in an office environment and precision engineering Research and design facility containing hazardous chemicals and high pressure gas systems.
The ideal candidate will have a very practical attitude and experience of building maintenance tasks in various fields, e.g. carpentry, electrical, HVAC (heating, ventilation, and air conditioning), plumbing, compressor and boiler maintenance, site vehicle upkeep, machine shop fabrication including welding.
You will have
Plumbing, carpentry and fabrication experience.
Hand and electrical tools understanding.
Machine shop equipment knowledge, lathes, band / chop saws, pillar drills, grinders etc.
Welding and fabrication skills, City and Guilds Level 2 minimum, Level 3 preferred, or similar structural welding qualification. ASME certification would be an advantage.
Basic working knowledge of PC applications, such as use of Word and Excel.
Experience in a facilities maintenance or engineering fabrication environment.
Role will involve
General site fixes, repairs and maintenance activities.
Installing new appliances and equipment.
Site project works, such as new test and productions facilities installations and commissioning.
Fabrication and welding.
Liaising with, arrange and managing external contractors.
Inspecting, maintaining and troubleshooting equipment and systems (e.g. ventilation).
Check site control panels and electrical wiring to identify issues.
Provide and assemble office and production area furniture, shelving, racking, as required.
Upkeep of site vehicles. ....Read more...
QA Automation Engineer – Wealth Management Technology – London / Hybrid
(Key skills: QA Engineer, SDET, Test Automation, TypeScript, Python, C#, Playwright, Cypress, Selenium, API Testing, CI/CD, Agile, SQL, SalesForce, Git, DevOps, Financial Services, QA Engineer)
Are you a QA Engineer with a strong software engineering mindset? Do you enjoy building scalable automation frameworks, working closely with developers, and embedding quality into every stage of the delivery lifecycle? This is an exciting opportunity to join a modern, technology-driven wealth management organisation undergoing significant digital transformation.
Our client is a forward-thinking wealth management business investing in cutting-edge platforms to enhance client experience and operational efficiency. As an QA Automation Engineer, you will play a key role in ensuring quality is engineered into their products from the ground up, working as part of cross-functional Agile teams delivering high-impact financial applications.
In this role, you will take ownership of test automation strategy and implementation, designing and building robust, scalable automation frameworks across web services and APIs. You’ll work with modern tools such as Playwright/Cypress, alongside languages like TypeScript, Python and/or C#, to create high-quality, maintainable automated test suites that integrate seamlessly into CI/CD pipelines.
You will collaborate closely with developers, DevOps engineers and product teams to drive a shift-left testing approach, ensuring quality is considered from initial design through to production. This includes contributing to requirement analysis, defining acceptance criteria, and embedding automated testing into the development workflow. You’ll also be responsible for validating APIs using tools such as Postman or Swagger and leveraging SQL to support data validation and integrity checks.
A key part of the role will be improving engineering practices across the team — enhancing test coverage, reducing manual effort, and increasing deployment confidence. You will actively contribute to continuous integration processes, ensuring automated tests are executed reliably as part of build and release pipelines.
The ideal candidate will bring strong experience (5 - 10 years) in test automation within Agile environments, with a solid foundation in programming and a passion for quality engineering. Experience within financial services or similarly regulated environments is beneficial, but equally important is a proactive mindset, strong problem-solving ability and a drive to continuously improve systems and processes.
This is a fantastic opportunity to join a collaborative, high-performing engineering team where quality is treated as a core engineering discipline, not just a function.
Location: London, UK / 3 days in the Offices (Hybrid working)
Salary: £60,000 - £75,000 + Bonus + Benefits
Applicants must have the right to work in the UK as sponsorship is not available.
NOIRUKTECHREC
NOIRUKREC....Read more...
Multi-Skilled Maintenance Engineer (Nights)
Location: Northampton, Northamptonshire
Salary: £50,000
Shift: Sunday – Thursday,
Industry: FMCG / Manufacturing
Company Overview
Synergi Search & Select are working on behalf of a leading FMCG manufacturer with operations across multiple markets. We are recruiting for a Multi-Skilled Maintenance Engineer to join their night shift engineering team.
Key Responsibilities
Carry out reactive and planned maintenance on high-speed production machinery
Support and deliver planned preventative maintenance schedules
Diagnose and repair mechanical and electrical faults to minimise downtime
Implement effective solutions for breakdowns and recurring issues
Ensure all work is carried out in line with company quality, health and safety standards
Candidate Requirements
Proven experience in a multi-skilled maintenance engineering role within FMCG, food, or manufacturing
Good knowledge of planned preventative maintenance systems
Strong fault-finding and problem-solving skills
Competent across mechanical and electrical systems, with experience of automation and PLCs desirable
Excellent awareness of Health & Safety in a manufacturing environment
Benefits
Salary up to £50,000
Fixed Sunday – Thursday night shift
Opportunity to work within a leading manufacturer with long-term career prospects
Training and development provided
Application Process
If you are interested in this opportunity, please apply via this advert or contact Anamika Sarkar on 01923 227 543. Alternatively, you can send your CV ....Read more...
Mechanical Design Engineer with subsea connector experience required to design and develop solutions with CAD and FEA tools high pressure underwater applications.
Requirements
Subsea or offshore mechanical system design experience.
CAD software and FEA tool fluency.
Subsea production systems, umbilical???s, jumpers, electrical and fibre connector knowledge.
Pressure testing, connector design.
Understanding of sealing technologies, pressure-rated designs, and mechanical-electrical interface design.
BEng or MEng in mechanical engineering or related degree subject.
Responsibilities
Design and develop Low and High Voltage subsea electrical and optical connectors, pressure housings, and sealing systems.
Perform FEA mechanical, thermal, and pressure simulations for HPHT high pressure and temperature for deep sea environments.
Prototype testing, pressure testing, and standard qualification.
Detailed documentation Design Specifications, Qualification Test procedures, 3D models, 2D drawings, BOMs, and Test Reports.
Design reviews and PEER reviews.
RCAs, FMEA, dFMEA, pFEMA at development and design cycles.
Cross-functional Collaboration.
Technical 2D drawings....Read more...
Mechanical Design Engineer with subsea connector experience required to design and develop solutions with CAD and FEA tools high pressure underwater applications.
Requirements
Subsea or offshore mechanical system design experience.
CAD software and FEA tool fluency.
Subsea production systems, umbilicals, jumpers, electrical and fibre connector knowledge.
Pressure testing, connector design.
Understanding of sealing technologies, pressure-rated designs, and mechanical-electrical interface design.
BEng or MEng in mechanical engineering or related degree subject.
Responsibilities
Design and develop Low and High Voltage subsea electrical and optical connectors, pressure housings, and sealing systems.
Perform FEA mechanical, thermal, and pressure simulations for HPHT high pressure and temperature for deep sea environments.
Prototype testing, pressure testing, and standard qualification.
Detailed documentation Design Specifications, Qualification Test procedures, 3D models, 2D drawings, BOMs, and Test Reports.
Design reviews and PEER reviews.
RCAs, FMEA, dFMEA, pFEMA at development and design cycles.
Cross-functional Collaboration.
Technical 2D drawings....Read more...
Fantastic opportunity to work in an engineering company who design and manufacture ultra-high-quality brake, clutch and other automotive components to Motorsport, top OEM and Special Vehicle markets.
This is an amazing opportunity to learn to become a multi-skilled manufacturing engineer.
You will get the opportunity to work in the following departments:
Design Engineering:
You’ll get an insight into using computer software such as Solidworks 3D CAD software, to produce accurate solid models which have been requested from our customers
Our Design Engineers ensure our components are as strong, light and efficient as possible, through accurate design of parts. Design Engineers work in an office environment designing components on computer software
Research & Development:
To stand still is to go backwards, so in research and development we look into the future, developing new ideas, patenting new processes and ensuring the company is always ahead of the competition
As an R&D Technician or Engineer, you will work in the R&D lab carrying out testing of parts, as well as using a computer to record data
Planning:
You’ll see first-hand how highly organised our planning strategy is. Planning is used to manage the coordination of production workflow, and developing and reviewing production plans with other departments
The manufacturing department is led by the work-to plan that the Planning team put together
As a Planner you will be based in an office using a computer
You will need to speak to other departments to ensure that the plan will work and your customers are updated with any changes as this will effect the delivery dates of components made
Quality Engineering (Metrology)
Quality is where we check each component is visibly correct before it is then compared to a mathematically perfect specification. Any part that is found to be outside these requirements that cannot be easily corrected is simply discarded and the whole process starts again
Quality Engineers and Technicians work in a Quality Lab, where there is a mix of hands-on work such as measuring components, and computer-based work
Production Engineering:
Production Engineering is made up of a team of Production Engineers who support the machining and assembly departments
The Production Engineers will provide technical expertise, help with problems on the machines, diagnose and solve problems, ensuring that the machines that make our products are working smoothly and efficiently. We have a wide variety of CNC machines with Fanuc and Heidenhain controls which are operated by our highly skilled CNC setter operators
Production Engineers work on the shop floor and also at a desk with a computer
Training:Together with invaluable commercial and practical experience, you’ll gain several academic and vocational qualifications throughout your time with your employer and Make UK, which are fully paid for, including:
Advanced Manufacturing Engineering Practical Foundation Training – in year 1, in 6 week blocks to include 4 weeks at Make UK and 2 weeks in company
Advanced Manufacturing Engineering Workplace
Competence Training - in years 2 to 4 in company
Level 3 BTEC Diploma in Advanced Manufacturing Engineering Development Knowledge - in Years 1, 2 & 3 on block release to Make UK
In house training in line with your requirements
Further qualifications deemed necessary by your employer
On completion of your studies, you will achieve your full apprenticeship certification that will prove competence as a Level 3 Engineering and Manufacturing Support Technician
Training Outcome:
Our Alcon Apprentices, once they have completed a 4 year apprenticeship will become fully qualified Technicians or Engineers in their specialism of engineering
We look to promote from within and some of our Senior Managers today came through the Alcon Apprenticeship Programme
If the management route is not for you, then becoming an expert in your line of work is where we aim to get you
Employer Description:Alcon is a designer and manufacturer of ultra-high quality, low volume brake, clutch and other automotive components. We operate in all areas of the industry around the world. Our clients and their requirements are as wide ranging as the products we supply. From tiny brake-by-wire controllers for Formula E racing cars to calipers required to stop 35 tonnes of armoured vehicle, the only factor common to everything we do is our no-compromise approach to engineering excellence.Working Hours :Monday - Friday, 08:00 - 17:00Skills: Communication skills,Attention to detail,Organisation skills,Problem solving skills,Presentation skills,Administrative skills,Number skills,Analytical skills,Logical,Team working,Creative,Initiative,Non judgemental,Patience....Read more...
We are looking for a Maintenance Engineer to join a cutting-edge aerospace manufacturing facility. Your role will encompass the maintenance, repairs, and enhancements of the production plant, covering both building and equipment.
Your responsibilities will involve addressing issues with office-based equipment and maintaining precision engineering research and design facilities, which include hazardous chemicals and high-pressure gas systems. The ideal candidate should possess a pragmatic mindset and have practical experience in welding and a variety of maintenance areas, including carpentry, electrical work, HVAC systems, plumbing, compressor and boiler maintenance, vehicle upkeep, and machine shop fabrication.
You should have experience in:
Plumbing, carpentry, and fabrication
Familiarity with hand and electrical tools
Knowledge of machine shop equipment like lathes, band/chop saws, pillar drills, and grinders
Welding and fabrication skills, preferably holding at least a City and Guilds Level 2 certification, with Level 3 or similar structural welding qualifications being advantageous. ASME certification is a plus.
Previous experience in facilities maintenance or engineering fabrication settings
....Read more...
We are looking for a Maintenance Engineer to join a cutting-edge aerospace manufacturing facility. Your role will encompass the maintenance, repairs, and enhancements of the production plant, covering both building and equipment.
Your responsibilities will involve addressing issues with office-based equipment and maintaining precision engineering research and design facilities, which include hazardous chemicals and high-pressure gas systems. The ideal candidate should possess a pragmatic mindset and have practical experience in welding and a variety of maintenance areas, including carpentry, electrical work, HVAC systems, plumbing, compressor and boiler maintenance, vehicle upkeep, and machine shop fabrication.
You should have experience in:
Plumbing, carpentry, and fabrication
Familiarity with hand and electrical tools
Knowledge of machine shop equipment like lathes, band/chop saws, pillar drills, and grinders
Welding and fabrication skills, preferably holding at least a City and Guilds Level 2 certification, with Level 3 or similar structural welding qualifications being advantageous. ASME certification is a plus.
Previous experience in facilities maintenance or engineering fabrication settings
....Read more...
Mechanical Engineer (Continental Shift Pattern)
Mirfield £44,000 – £47,000 06:00–18:00 / 18:00–06:00 | 2 Days, 2 Nights, 4 OffAQUMEN Recruitment is proud to be supporting a well-established and forward-thinking manufacturing business in Mirfield as they look to strengthen their Engineering team with the addition of a Mechanical Engineer working a continental shift pattern.This is an excellent opportunity to join a stable operation with strong investment in people, processes and equipment — ideal for an engineer who enjoys fault-finding, continuous improvement, and working as part of a supportive shift team.
The Role
As a Mechanical Engineer, you’ll play a key role in ensuring production equipment operates efficiently with minimal downtime. You’ll work both reactively and proactively, supporting production performance and contributing to continuous improvement initiatives across site.Typical responsibilities include:
Carrying out planned preventative maintenance (PPM)
Responding quickly to breakdowns and production stoppages
Diagnosing mechanical faults across production machinery
Supporting installation and improvement projects
Working with hydraulics and pneumatics systems
Maintaining strong communication across shift teams
Updating maintenance systems and KPI boards
Supporting continuous improvement activity
Ensuring high housekeeping and workshop standards
Contributing to a safe working environment at all times
What We’re Looking For
We’re keen to speak with engineers who are proactive, practical problem-solvers and comfortable working in a fast-paced manufacturing environment.Ideally, you will have:
Time-served Mechanical Engineering apprenticeship or City & Guilds (or equivalent)
Strong fault-finding experience on production machinery
Experience working with hydraulics and pneumatics
Welding capability (MIG / TIG / Arc) preferred
Good understanding of health & safety practices
A positive team-focused attitude
Ability to work independently with minimal supervision
Shift Pattern & Benefits
Continental shift pattern: 2 days / 2 nights / 4 off
12-hour shifts: 06:00–18:00 / 18:00–06:00
Salary guide: £44,000 – £47,000
Excellent work/life balance with built-in extended rest periods
Opportunity to contribute to improvement projects
Stable long-term engineering environment
Why Apply?
This role offers the chance to join a supportive engineering function where your input genuinely makes a difference. If you enjoy solving problems, improving machinery reliability, and working within a collaborative team environment — this could be the move you’ve been looking for.
Apply today through AQUMEN Recruitment to find out more about this opportunity and take the next step in your engineering career.Aqumen Business Solutions is acting as an Employment Agency in relation to this vacancy.....Read more...
An exciting opportunity has arisen for an Electrical Hardware Engineer to join a high-performing engineering team developing cutting-edge flight simulation technology. These systems replicate real-world aircraft environments and play a critical role in pilot training and aviation safety worldwide.
This role offers the chance to work at the forefront of aerospace innovation, contributing to the design and delivery of advanced electrical and electro-mechanical hardware systems in a fast-paced, customer-driven environment.
You will play a key role in the design, development, and delivery of electrical hardware solutions for complex simulation systems. Working within a multidisciplinary team, you will contribute across the full engineering lifecycle, from concept through to validation and delivery.
Key Responsibilities
- Design and develop electrical hardware systems for advanced flight simulators
- Produce technical specifications, schematics, and electrical designs
- Develop power distribution systems (single & three-phase), including protection and cable sizing
- Collaborate with software, systems, and mechanical teams to deliver integrated solutions
- Ensure compliance with industry standards and safety-critical requirements
- Conduct testing, validation, and troubleshooting of hardware systems
- Support EMC design and testing activities
- Engage with suppliers for component selection and integration
- Contribute to continuous improvement and innovation across hardware capabilities
- Support or mentor junior engineers where appropriate
Skills & Experience
- Degree in Electrical / Electronic Engineering or similar
- 510+ years experience in electrical hardware design (aerospace, defence, simulation, or similar)
- Strong experience with:
- Electrical design and power distribution systems
- Electrical CAD tools (schematics, wiring diagrams, panel layouts)
- EMC principles (grounding, shielding, filtering)
- Hardware testing, validation, and troubleshooting
- Knowledge of BS 7671, Low Voltage Directive, EMC Directive
- Experience working across the full product lifecycle (concept to production)
- Strong communication skills and ability to work within multidisciplinary teams
Desirable Experience
- Chartered Engineer (or working towards)
- Experience in flight simulation, avionics, or aerospace systems
- Exposure to computing system integration (rack systems, cooling, data cabling)
- Background in high-reliability or safety-critical environments
Benefits
- Competitive salary + discretionary annual bonus
- Pension (matched up to 7%)
- 25 days holiday + bank holidays (with option to buy/sell)
- Private medical insurance
- Life assurance (4x salary)
- Group income protection
- Employee assistance & wellbeing support (24/7)
- Retail, travel, and leisure discounts
This is a fantastic opportunity for an experienced hardware engineer looking to work on complex, high-impact systems at the cutting edge of aerospace technology.
TT....Read more...
Our client is an international multi-service provider, offering textile, hygiene and facility service solutions across multiple sectors operating across the UK.
Job Role & Key Responsibilities:
The Maintenance Engineer will support all on-site engineering and maintenance activities, reporting directly to the Engineering Manager. The role focuses on ensuring plant, equipment, and infrastructure operate safely, efficiently, and with minimal downtime.
Key Responsibilities:
Carry out planned preventative maintenance (PPM) and respond to breakdowns promptly
Support equipment updates, new installations, and infrastructure improvements
Ensure all work complies with site health & safety procedures and engineering standards
Work closely with engineers on alternating shifts to ensure effective daily handovers
Diagnose faults and complete repairs safely while keeping production teams informed
Contribute to continuous improvement initiatives across plant and machinery
Identify recurring issues and assist in implementing long-term solutions
Report incidents, near misses, and hazards in line with safety policies
Maintain clear communication with production teams and engineering colleagues
The Ideal Candidate will have:
A recognised engineering qualification (electrical)
Apprenticeship background with multi-skilled electrical experience
Strong fault-finding and repair capability across plant and production equipment
Good working knowledge of health & safety standards
Clear verbal and written communication skills in English
Desirable Skills:
Electrical installation and maintenance experience (18th Edition advantageous)
Electronic fault-finding to component level
Experience with pneumatics, hydraulics, and steam systems
Benefits Include:
Salary of £48,000
Double days / rotating shift pattern
Structured engineering environment with ongoing development
If you are interested in this exciting opportunity, please get in touch with us or apply below....Read more...
Our client is an international multi-service provider, offering textile, hygiene and facility service solutions across multiple sectors operating across the UK.
Job Role & Key Responsibilities:
The Maintenance Engineer will support all on-site engineering and maintenance activities, reporting directly to the Engineering Manager. The role focuses on ensuring plant, equipment, and infrastructure operate safely, efficiently, and with minimal downtime.
Key Responsibilities:
Carry out planned preventative maintenance (PPM) and respond to breakdowns promptly
Support equipment updates, new installations, and infrastructure improvements
Ensure all work complies with site health & safety procedures and engineering standards
Work closely with engineers on alternating shifts to ensure effective daily handovers
Diagnose faults and complete repairs safely while keeping production teams informed
Contribute to continuous improvement initiatives across plant and machinery
Identify recurring issues and assist in implementing long-term solutions
Report incidents, near misses, and hazards in line with safety policies
Maintain clear communication with production teams and engineering colleagues
The Ideal Candidate will have:
A recognised engineering qualification (mechanical or electrical)
Apprenticeship background with multi-skilled electrical and mechanical experience
Strong fault-finding and repair capability across plant and production equipment
Good working knowledge of health & safety standards
Clear verbal and written communication skills in English
Desirable Skills:
Electrical installation and maintenance experience (18th Edition advantageous)
Mechanical fabrication and maintenance skills
Electronic fault-finding to component level
Experience with pneumatics, hydraulics, and steam systems
Benefits Include:
Competitive Salary
Double days / rotating shift pattern
Structured engineering environment with ongoing development
If you are interested in this exciting opportunity, please get in touch with us or apply below....Read more...
Are you an experienced Principal Firmware Engineer ready to take ownership of firmware strategy and delivery for cutting-edge laser and photonics systems? This is a senior, high-impact role where you’ll lead firmware development for advanced embedded platforms supporting industries such as medical devices, life sciences, semiconductors, space, and quantum technologies.
This opportunity offers the chance to shape global firmware standards, drive innovation, and mentor teams while delivering robust, high-quality embedded solutions that meet customer and business objectives.
Key responsibilities of the Principal Firmware Engineer job based in Southampton:
Lead the research, development, testing, and maintenance of firmware for new and existing laser systems.
Drive the creation of firmware concepts, roadmaps, and strategic plans aligned with organisational goals.
Design, develop, test, and debug embedded firmware using C/C++ for complex hardware platforms.
Develop algorithms for measurement data processing and create interface and communication protocol code.
Implement and maintain build systems, automated testing, and continuous integration pipelines.
Ensure firmware meets design, quality, reliability, and cost-effectiveness standards.
Manage projects from concept and design through unit testing and handover to production.
Conduct code reviews and ensure documentation captures designs, tests, policies, and procedures.
Establish and maintain global best practice procedures across engineering teams and sites.
Act as a key subject matter expert and advisor to internal stakeholders.
Track deliverables, set priorities, and provide regular progress reports to senior leadership.
Drive continuous improvement across processes, products, and services within the firmware function.
Skills & knowledge required of the Principal Firmware Engineer job based in Southampton:
Expert-level proficiency in C/C++ and embedded firmware development.
Strong understanding of communication protocols networked and industrial interfaces.
Experience with automated testing, CI/CD pipelines, and build systems.
Knowledge of scripting languages and test automation frameworks.
Strong project management, time management, and organisational skills.
Ability to work collaboratively across engineering, R&D, product, and project teams.
Strong communication skills and the ability to operate effectively in a fast-changing, high-growth environment.
Innovative mindset with a strong customer and quality focus.
Degree in Computer Engineering, Electrical Engineering, or a related discipline.
Proven experience setting up and leading a firmware function.
Strong background in system design, planning, and delivering complex engineering projects.
Experience in the photonics industry and within fast-paced, growing environments.
If this Principal Firmware Engineer job based in Southampton could be of interest, send your CV to bwiles@redlinegroup.Com or call Ben on 01582 878816 to discuss in more detail.
....Read more...
mmWave RF PCB Design Engineer required to refine existing satellite communications terminals hardware and contribute to the next generation of products. You will test, debug and diagnose complex PCB assemblies while supporting both established products and new designs.
Requirements
Satellite antenna terminal design experience integrating mmWave RF antennas.
RF hardware circuit expert.
Programming and scripting skills with Python, MATLAB or similar.
Laboratory test equipment experience with oscilloscopes, spectrum analysers, signal generators.
SPI, I2C and CAN standards.
PCBA rework skills, including experience with irons, hot air, and IR rework equipment.
Role
Test production PCB and PCBA assemblies, diagnose faults to the component level, and document test yields and rework actions.
Develop automated test systems.
Work in cross functional hardware and software teams to find and remove inefficiency.
Meet manufacturing targets while maintaining quality and test standards.
Burild and work up PCB or PCBA board debugging, including initial power on tests and visual inspection.
Improve design documentation such as schematics, drawings, BOMs, and update formal documentation with ECNs.
Create and document Work Instructions for testing, repairing, and modifying products.....Read more...
mmWave RF PCB Design Engineer required to refine existing satellite communications terminals hardware and contribute to the next generation of products. You will test, debug and diagnose complex PCB assemblies while supporting both established products and new designs.
Requirements
Satellite antenna terminal design experience integrating mmWave RF antennas.
RF hardware circuit expert.
Programming and scripting skills with Python, MATLAB or similar.
Laboratory test equipment experience with oscilloscopes, spectrum analysers, signal generators.
SPI, I2C and CAN standards.
PCBA rework skills, including experience with irons, hot air, and IR rework equipment.
Role
Test production PCB and PCBA assemblies, diagnose faults to the component level, and document test yields and rework actions.
Develop automated test systems.
Work in cross functional hardware and software teams to find and remove inefficiency.
Meet manufacturing targets while maintaining quality and test standards.
Burild and work up PCB or PCBA board debugging, including initial power on tests and visual inspection.
Improve design documentation such as schematics, drawings, BOMs, and update formal documentation with ECNs.
Create and document Work Instructions for testing, repairing, and modifying products.....Read more...
Test Engineer - Power Electronics - Aargau, SwitzerlandMandatory Skillset: PCB, Testing, Electronics
Our Client:Is a pioneering family-owned Swiss company specialising in power electronics that designs, manufactures, and supplies high-power RF amplifiers and transmitters for various industries, including broadcasting, telecommunications, military and defence, and scientific research.
Job Summary:We are seeking a skilled Test Engineer to join our client's team, who is responsible for developing test requirements, creating test instructions, and testing PCBs, assemblies, and systems. The ideal candidate will have a strong background in electronics and measurement technology, with practical experience in handling measuring equipment and a good understanding of radio frequency and power engineering.
Main Responsabilities:
Development of test requirements and new test methods in collaboration with the development department
Creation of test instructions and test reports
Testing, repairing (requires e.g. soldering skills) and commissioning of PCB’s, assemblies and systems as well as participation in tests in the test field
Checking production orders and goods receipt material according to quality characteristics
Perform factory inspections with customers
Management of measuring equipment storage
Construction of test facilities for the rationalization of test procedures
Required Competencies:
Completed technical training in the direction of electronics/measurement technology, technician school, an advantage
Practical experience in handling measuring equipment
Knowledge of radio frequency and power engineering is an advantage
Excellent knowledge of German and English
Positive attitude to work
Reliable team player with a pronounced quality awareness
Enjoy working independently
Benefits:
Competitive salary and benefits package – Up to CHF 110k
Opportunity to work on exciting and challenging projects
Collaborative and dynamic work environment
Professional development and training opportunities
Comprehensive benefits package, including health insurance, retirement plan, and more
Flexible working hours and remote work options
30 Days Annual Leave
Location: Aargau, Baden, SwitzerlandSalary: CHF 80-110k + Bonus Benefits
Tech Stack: PCB, Testing & Electronics
Applicants for the Test Engineer position must be based in Switzerland
NOIRSWITZERLANDRECNOIREUROPERECNOIREURNET
NC/TC/TESARG80110....Read more...
Multi-Skilled Maintenance Engineer (Mechanical or Electrical Bias)
Our client is a leading UK manufacturer of essential building products, operating across 17 sites nationwide and supplying materials that support the UK construction industry.
They are looking to recruit a Multi-Skilled Maintenance Engineer to join their close-knit maintenance team within a heavy industrial manufacturing environment. The company will consider engineers with either a mechanical or electrical bias.
Key Responsibilities
Reactive and planned maintenance on industrial production machinery
Fault finding on electrical and mechanical systems
Working on equipment such as conveyors, mixers, kilns and ovens
Reading engineering drawings and electrical schematics
Supporting PPM schedules and continuous improvement projects
Completing maintenance reports and fault logs
Supporting machinery upgrades and installations
The Ideal Candidate
NVQ / City & Guilds Level 3 in Electrical or Mechanical Engineering
Experience working in a manufacturing or heavy industrial environment
Strong fault-finding and problem-solving skills
Comfortable working in a dusty / heavy plant environment
Able to work Panama shift pattern (days and nights)
Desirable
PLC knowledge (Siemens advantageous)
Experience with AC/DC drives
Basic mechanical fault finding or changeovers
Benefits
Competitive salary
Shift allowance
Enhanced pension
Employee Assistance Programme
Supportive and collaborative engineering team
If you’re looking for a hands-on engineering role within a stable UK manufacturing business, apply today or get in touch to learn more.
....Read more...
As an Engineering Apprentice, you’ll work with experienced engineers to:
Maintain and repair machinery on our production lines
Diagnose mechanical, electrical and automation faults
Carry out preventative maintenance
Learn how food production equipment works and how to keep it running efficiently
Support continuous improvement across our bakery operations
Training:About the Training Programme
Your apprenticeship combines hands‑on engineering experience at our sites with technical training delivered by MGTS (Midland Group Training Services).
Residential Training at MGTS (Coventry).
Your technical training will include residential blocks at MGTS, with accommodation fully funded by Lantmännen Unibake:
22 weeks in Year 1
14 weeks in Year 2
6 weeks in Year 3
This industry‑leading training will equip you with essential mechanical, electrical and automation skills.Training Outcome:After completing your apprenticeship, you could progress to a fully qualified Maintenance Engineer, with opportunities to specialise in:
Mechanical
Electrical
Automation
You’ll also have access to ongoing training, development and the chance to work on innovative engineering projects in a growing industry. Employer Description:Lantmännen Unibake supplies bakery products to thousands of supermarkets and restaurants across Europe on our mission towards billions of smiling tummies! If you’re passionate about food, curious about how things work, and want a hands‑on career in engineering, this could be the perfect opportunity for you.Working Hours :Monday to Friday, 9am to 5pm.Skills: Communication skills,IT skills,Attention to detail,Organisation skills,Problem solving skills,Analytical skills,Logical....Read more...
Job Description:
Job Title: Multi-Skilled Maintenance EngineerLocation: Low Moor, BradfordWorking Hours: Monday to Friday, 8:00 AM to 5:00 PM (overtime available)Job Description:We are looking for a genuinely multi-skilled Maintenance Engineer to join our clients team in Low Moor, Bradford. This is a diverse, hands-on role in a fast-paced manufacturing environment where you'll be expected to work across both mechanical and electrical systems.You’ll be responsible for carrying out a wide range of planned and reactive maintenance tasks, supporting continuous production, and ensuring the safe and efficient operation of all plant equipment.Key Responsibilities:Mechanical & Electrical Maintenance:
Maintain and repair mechanical systems: belts, chains, bearings, pipework, pumps, valves, and filters.Work on pneumatic and hydraulic systems including solenoids, actuators, rams, and compressors.Fault-find and repair basic electrical issues, including sensors, switches, fuses, relays, and overloads.Carry out safe isolation of electrical equipment and support minor electrical installations or modifications.Understand and work with steam systems, boilers, control valves, and water softening equipment.Diagnose and resolve faults in automated and computer-controlled machinery.Support continuous improvement and preventative maintenance initiatives.
Essential Skills & Experience:
Demonstrable experience in a similar multi-skilled maintenance role within manufacturing or industrial environments.Strong mechanical and electrical fault-finding abilities.17th / 18th Edition qualifiedConfident working safely with 3-phase systems, basic control panels, and low-voltage equipment.Skilled in using diagnostic tools and interpreting technical documentation.Comfortable working across a wide range of systems from pneumatics and hydraulics to electrical controls.
Desirable Skills & Experience:
Familiarity with PLC-controlled equipment (understanding inputs/outputs, basic diagnostics).Experience with steam and compressed air systems.Experience with continuous improvement or lean manufacturing practices.
Personal Attributes:
Versatile, hands-on, and proactive.Strong communication and problem-solving skills.Able to work independently and collaboratively in a team.Reliable, detail-oriented, and safety-conscious.
If you're a capable and well-rounded Multi-Skilled Engineer looking to bring your talents to a forward-thinking team, we’d love to hear from you
....Read more...
The role of Apprentice Engineering Technician is to assist Krones Field Service Engineers in installing, commissioning, overhauling and fault-finding on a wide range of KRONES machinery. A customer facing role, that is field based requiring travel to customer premises as and when required and potentially at short notice.
Adhere to strict health and safety policies and procedures and being compliant at all times.
Assist with installation and commissioning of machines and production line upgrades.
Support diagnosis, elimination, and documentation of malfunctions.
Assist in overhauling of customer machines on site at various locations in the UK.
Carry out all aspects of the apprenticeship, including offsite classroom training and onsite practical learning.
Provide accurate reporting and feedback (service reports, timesheets, expenses in line with company policy).
Participate in preventive maintenance and system improvement activities.
Work with customer-specific guidelines and safety instructions.
Travel to and from sites using company vehicles.
Training:
Level 3 Mechatronics Engineering Apprenticeship.
Approx. 42 months (3.5 years).
Leads to a nationally recognised qualification as a Mechatronics Maintenance Technician.
Delivered in partnership with Training 2000. Attend college full time for 1 year then 1 day per week in years following.
Combination of off-the-job education (technical theory) and on-the-job practical application. Use of e-portfolio OneFile to be used to support evidence gathering.
Practical and theory training at Krones AG Neutraubling facility.
Periodic progress reviews conducted by Training 2000 to support qualification and independent review by Krones UK.
Training Outcome:This apprenticeship provides a solid foundation for progression into roles such as Field Service Engineer, Maintenance Technician, or Automation Specialist, with opportunities for international exposure and advanced technical training.Employer Description:Krones designs and implements complete lines for beverages and food, which cover each individual production process step starting from product and container production, filling and packaging all the way up to material flow and container recycling.Working Hours :Monday to Friday, 8am to 4.30pm.Skills: Attention to detail,Organisation skills,Customer care skills,Problem solving skills,Team working....Read more...
Senior Data Scientist (Energy sector) - Remote
(Data Scientist, Data Science, Data Engineer, Python, SQL, Data pipelines, Machine learning, Scikit-learn, XGBoost, TensorFlow, PyTorch, forecasting, predictive modelling, Cloud, Azure, Databricks, Spark, dbt, Energy, Utilities, Data Scientist, Data Science, Data Engineer)
Our client is a fast-growing, mission-driven global giant in the energy sector and they are playing a significant part in creating a cleaner, more sustainable future for all. They are looking for a Senior Data Scientist with a track record of building production-grade analytical products, to design, build and own complex data products that power our clients’ decision-making. You will be working with senior stakeholders to identify opportunities for new products and features, building complex forecasting features, designing data pipelines, developing machine learning models and monitoring model performance and data quality.
We are seeking an experienced Senior Data Scientist with knowledge of the Energy sector and experience of Python, SQL and machine learning frameworks and libraries, such as scikit-learn, XGBoost, TensorFlow or PyTorch, for forecasting and predictive modelling. You will also need an understanding of cloud platforms, particularly Azure and tools like Databricks, Spark, dbt or equivalent.
We are keen to hear from talented Senior Data Scientist candidates from all backgrounds, but particularly within the Energy sector.
This is a truly amazing opportunity to work for a prestigious brand that will do wonders for your career. They invest heavily in training and career development; top performers are guaranteed a career path into senior and lead positions within 12 months.
Location: Remote
Salary: £90k - £110k + Bonus + Excellent Benefits
To apply for this position please send your CV to Nathan Warner at Noir Consulting.
(Data Scientist, Data Science, Data Engineer, Python, SQL, Data pipelines, Machine learning, Scikit-learn, XGBoost, TensorFlow, PyTorch, forecasting, predictive modelling, Cloud, Azure, Databricks, Spark, dbt, Energy, Utilities, Data Scientist, Data Science, Data Engineer)
NOIRUKTECHREC
NOIRUKREC....Read more...
The role includes:
Engineering design support and CAD production
Preparation of technical drawings and design deliverables
Participation in structural inspections and investigations
Extraction and collection of samples for laboratory analysis
Management and organisation of company equipment stores
You will have the opportunity to work on high profile projects like:
Forth and Tay Road Bridges
HMS Belfast
Battersea Power Station
Kew Gardens Temperate House
Numerous Highways and Infrastructure Projects
Key Responsibilities:
Engineering & Design Support
Assist engineers in preparing technical drawings using CAD software
Support the production of design packages and formal deliverables
Maintain drawing registers and document revision control
Develop understanding of structural repair and protection systems
Support preparation of sketches, mark-ups and technical documentation under supervision
Site Inspection & Investigation
Assist with inspection of civil and structural assets across the UK
Support non-destructive testing of reinforced concrete and steel structures
Extract and collect samples from structures for laboratory analysis
Maintain clear, accurate and methodical site notes
Compile photographic and technical records for reporting purposes
Work outdoors in varying weather conditions
Climb ladders and access elevated or confined areas as required
Travel frequently throughout the UK, including occasional overnight stays
Equipment & Stores Management
Organise and maintain company equipment stores
Ensure all equipment is cleaned following use
Ensure equipment is functional, safe and ready for deployment
Maintain equipment logs and inspection/calibration records where required
Manage consumables and maintain orderly storage systems
Training:Training will take place once a week will take place at City of Westminster College, Paddington Campus (25 Paddington Green, London W2 1NB).Training Outcome:Continued employment with a growing team of Engineers.
This role provides a structured pathway into Engineering Technician [EngTech] registration, with the opportunity for continued training to Engineering roles, Incorporated Engineer [IEng] or Chartership [CEng].
This role offers specialist training in Cathodic Protection to BS EN ISO 15257:2017, Level 3 with opportunity to continue training to Level 4 [Senior Cathodic Protection Engineer].Employer Description:Corrosion Engineering Solutions Ltd is a specialist UK consultancy based in Tring, Hertfordshire, providing corrosion engineering, inspection, investigation and design services to the construction and infrastructure sectors.
We are experts in the design and implementation of Cathodic Protection systems for Historic Buildings, Concrete Structures, Ports and Harbours and Buried Infrastructure.
We assess, design and deliver solutions for the protection and repair of reinforced concrete and steel structures. Our work combines technical design, structural inspection, materials science and practical site engineering. We operate nationally and work on complex infrastructure and structural assets.Working Hours :8 hours per day, between the hours of 08.00 and 18:00.Skills: IT skills,Attention to detail,Organisation skills,Team working,Initiative,Physical fitness,Willingness to learn,Eligible for BPSS screening,Experience with CAD software,Methodical approach to work....Read more...
