We are looking for a Senior RF Engineer to lead the design, development, and testing of RF, microwave, and antenna systems used in advanced electronic products.
Key responsibilities
Lead RF and antenna design projects (including modules and sub-contracted work)
Design and optimise microwave PCB layouts and RF systems
Perform RF component selection and system-level analysis
Support antenna design, modelling, testing, and validation
Troubleshoot RF production issues and perform root cause analysis
Work closely with manufacturing, supply chain, quality, and customers
Ensure engineering standards, documentation, and procedures are followed
Key Skills
RF PCB design at microwave frequencies
Strong knowledge of RF components (amplifiers, filters, mixers, PLLs)
RF system design (cascade analysis)
Experience with RF test equipment (VNA, spectrum analysers)
Antenna design knowledge (including array and printed antennas)
Altium and RF simulation tools
Radar or communications background
MATLAB and Python for test automation ....Read more...
Our client, a world leader in advanced RF and microwave technology, are looking for a PCB Layout Engineer based in Cambridge to join their team on a permanent basis.
This is an exciting opportunity to work on complex, high-performance electronic systems, supporting the development of cutting-edge products across telecoms, space, and defence sectors. The role goes beyond traditional PCB layout, combining design expertise with a strong understanding of engineering principles and manufacturability.
Key responsibilities of the PCB Layout Engineer job based in Cambridge:
Own PCB layout activities across complex electronic products and subsystems.
Translate schematic designs into high-quality PCB layouts meeting electrical, mechanical, thermal, and manufacturing requirements.
Design with consideration for impedance control, grounding, power distribution, thermal management, and EMC performance.
Support high-speed digital interfaces such as Ethernet, DDR, LVDS, PCIe, and JESD204.
Generate full fabrication, assembly, and manufacturing documentation packages.
Participate in design reviews, DFM/DFA assessments, and engineering risk reviews.
Verify component footprints, symbols, and libraries against datasheets.
Support continuous improvement of PCB standards, libraries, and design processes.
Work with suppliers and manufacturing partners to resolve production challenges.
Support prototype builds, board bring-up, and investigation of PCB-related issues.
Experience required for the PCB Layout Engineer job based in Cambridge:
Strong PCB layout experience using Altium Designer and Altium 365.
Experience taking PCB designs from schematic through to manufacturing release.
Good understanding of PCB stack-ups, signal integrity, power integrity, thermal design, and EMC.
Experience working with mixed-signal, digital, power, and RF-related designs.
Ability to interpret schematics and understand engineering intent.
Experience creating and validating component footprints and libraries.
Knowledge of PCB fabrication, SMT assembly, and DFM/DFA processes.
Strong attention to detail and ability to work within multidisciplinary teams.
This is an excellent opportunity to join a highly collaborative and innovative engineering team, working on cutting-edge RF technologies and contributing to products used in critical communications and advanced applications.
If this PCB Layout Engineer job based in Cambridge could be of interest, please send your CV to bwiles@redlinegroup.Com or call Ben on 01582 878816.....Read more...
A Senior Quality Engineer is sought to join an innovative engineering team in Fareham, Hampshire, contributing to the continuous improvement of quality assurance, supplier quality, project quality, and environmental management activities across a high-technology manufacturing environment.
The Senior Quality Engineer, Fareham, Hampshire, will be expected to develop and apply your expertise in quality systems, root cause analysis, auditing, and supplier quality management. You will work closely with engineering, operations, procurement, and customer stakeholders to drive quality improvements, ensure compliance with industry standards, and support the successful delivery of complex engineering projects.
Responsibilities include:
Record, investigate, and categorise non-conformities, identifying root causes and implementing effective corrective actions.
Manage customer complaints and quality issues, ensuring timely investigation, resolution, and communication with customers.
Deliver toolbox talks and quality awareness activities to production and engineering teams.
Support engineering and project teams by defining and managing project quality assurance activities and quality plans.
Participate in project design reviews and ensure quality requirements are embedded throughout the product lifecycle.
Conduct internal audits to support compliance with Quality Management Systems (QMS) and Environmental Management Systems (EMS).
Assess, audit, and manage suppliers to ensure continued compliance with quality standards and business requirements.
Monitor supplier performance, investigate supplier quality issues, and implement corrective actions to improve supplier quality metrics.
Review incoming materials and components to ensure conformance to specifications and quality standards.
Support health and safety activities including risk assessments, incident investigations, and corrective action implementation.
Maintain ISO 9001 and ISO 14001 compliance through effective auditing, reporting, and continuous improvement activities.
Produce quality, environmental, and supplier performance reports to support business objectives and management reviews.
Key skills & experience:
Degree, HNC/HND, or equivalent qualification in Quality, Engineering, Manufacturing, or a related discipline.
Proven experience in a Quality Engineer or Senior Quality Engineer position within a manufacturing or engineering environment.
Strong knowledge of quality management systems, auditing processes, and continuous improvement methodologies.
Experience conducting root cause investigations using tools such as 8D, 5 Whys, Fishbone, or similar techniques.
Knowledge of ISO 9001 and ISO 14001 standards and compliance requirements.
Experience managing supplier quality and conducting supplier audits.
Strong understanding of engineering drawings, manufacturing processes, and quality inspection techniques.
Excellent analytical, problem-solving, and organisational skills.
Strong communication and stakeholder management abilities.
Ability to work collaboratively across engineering, operations, procurement, and customer-facing teams.
How to apply:
Apply now for the Senior Quality Engineer role in Fareham, Hampshire. Send your CV to adighton@redlinegroup.Com or call Adam on 01582878821.....Read more...
Quality Control Engineer
£40’000- £50’000 + Variety Of Work + Technical Training + Flexi Time + Competitive Pension + Stability + Family Feel Environment + ‘Immediate Start’
Join a close-knit, supportive team where you'll enjoy genuinely varied work, excellent work-life balance, and a company that truly values and looks after its people. This is a fantastic opportunity to build your career in an environment where your contribution is recognised and your wellbeing matters.
This company operates within the medical sector, supplying specialist products across Europe. Due to continued growth, they are looking for a Quality Control Engineer who enjoys hands-on quality work and wants to contribute to meaningful, high-precision projects.
Your Role As A Quality Control Engineer Will Include:
* Operating CMM equipment to inspect components and ensure compliance with engineering drawings and specifications.* Carrying out dimensional inspections, product testing, and quality checks throughout the manufacturing process.* Interpreting technical drawings and specifications to verify product conformity.* Producing inspection reports and documenting quality findings accurately.* Identifying non-conformances and supporting root cause investigations and corrective actions.* Working closely with production and engineering teams to maintain quality standards and drive continuous improvement.* Ensuring inspection equipment is calibrated and maintained in line with company procedures.* Supporting compliance with quality standards, customer requirements, and audit processes.
As A Quality Control Engineer You Will Have:
* Previous experience operating and using CMM measuring equipment.* A background in quality inspection and testing within a manufacturing or engineering environment.* The ability to read and interpret engineering drawings and technical specifications.* Strong attention to detail and a proactive approach to maintaining quality standards.* Experience producing inspection reports and documenting quality findings.* The ability to commute to Bromley on a daily basis.
ZEISS, CMM,Quality Control Engineer, Inspection Beckenham, Kent, Bromley, London, South London, South East London,Quality Aerospace, Engineering, Actuators,Healthcare, Metrology,
This vacancy is being advertised by Future Engineering Recruitment Ltd. The services of Future Engineering Recruitment Ltd are that of an Employment Agency.
Future Engineering Recruitment Ltd can only accept applications from candidates who have a valid legal permit or right to work in the United Kingdom. Potential candidates who do not have this right or permit, or are pending an application to obtain this right or permit should not apply as your details will not be processed.
We will endeavour to respond to all applicants however due to the sheer volume of response, we can only guarantee that candidates who have been shortlisted will be contacted.....Read more...
Quality Control Engineer
Beckenham
£41’000- £51’000 + Variety Of Work + Technical Training + Flexi Time + Competitive Pension + Stability + Family Feel Environment + ‘Immediate Start’
Join a close-knit, supportive team where you'll enjoy genuinely varied work, excellent work-life balance, and a company that truly values and looks after its people. This is a fantastic opportunity to build your career in an environment where your contribution is recognised and your wellbeing matters.
This company operates within the medical sector, supplying specialist products across Europe. Due to continued growth, they are looking for a Quality Control Engineer who enjoys hands-on quality work and wants to contribute to meaningful, high-precision projects.
Your Role As A Quality Control Engineer Will Include:
* Operating CMM equipment to inspect components and ensure compliance with engineering drawings and specifications.* Carrying out dimensional inspections, product testing, and quality checks throughout the manufacturing process.* Interpreting technical drawings and specifications to verify product conformity.* Producing inspection reports and documenting quality findings accurately.* Identifying non-conformances and supporting root cause investigations and corrective actions.* Working closely with production and engineering teams to maintain quality standards and drive continuous improvement.* Ensuring inspection equipment is calibrated and maintained in line with company procedures.* Supporting compliance with quality standards, customer requirements, and audit processes.
As A Quality Control Engineer You Will Have:
* Previous experience operating and using CMM measuring equipment.* A background in quality inspection and testing within a manufacturing or engineering environment.* The ability to read and interpret engineering drawings and technical specifications.* Strong attention to detail and a proactive approach to maintaining quality standards.* Experience producing inspection reports and documenting quality findings.* The ability to commute to Bromley on a daily basis.
ZEISS, CMM,Quality Control Engineer, Inspection Beckenham, Kent, Bromley, London, South London, South East London,Quality Aerospace, Engineering, Actuators,Healthcare, Metrology,
This vacancy is being advertised by Future Engineering Recruitment Ltd. The services of Future Engineering Recruitment Ltd are that of an Employment Agency.
Future Engineering Recruitment Ltd can only accept applications from candidates who have a valid legal permit or right to work in the United Kingdom. Potential candidates who do not have this right or permit, or are pending an application to obtain this right or permit should not apply as your details will not be processed.
We will endeavour to respond to all applicants however due to the sheer volume of response, we can only guarantee that candidates who have been shortlisted will be contacted.....Read more...
Multi-Skilled Maintenance Engineer (Nights)
Location: Northampton, Northamptonshire
Salary: £50,000
Shift: Sunday – Thursday,
Industry: FMCG / Manufacturing
Company Overview
Synergi Search & Select are working on behalf of a leading FMCG manufacturer with operations across multiple markets. We are recruiting for a Multi-Skilled Maintenance Engineer to join their night shift engineering team.
Key Responsibilities
Carry out reactive and planned maintenance on high-speed production machinery
Support and deliver planned preventative maintenance schedules
Diagnose and repair mechanical and electrical faults to minimise downtime
Implement effective solutions for breakdowns and recurring issues
Ensure all work is carried out in line with company quality, health and safety standards
Candidate Requirements
Proven experience in a multi-skilled maintenance engineering role within FMCG, food, or manufacturing
Good knowledge of planned preventative maintenance systems
Strong fault-finding and problem-solving skills
Competent across mechanical and electrical systems, with experience of automation and PLCs desirable
Excellent awareness of Health & Safety in a manufacturing environment
Benefits
Salary up to £50,000
Fixed Sunday – Thursday night shift
Opportunity to work within a leading manufacturer with long-term career prospects
Training and development provided
Application Process
If you are interested in this opportunity, please apply via this advert or contact Anamika Sarkar on 01923 227 543. Alternatively, you can send your CV....Read more...
You'll work alongside our engineering team to keep our food-grade production machinery running and to support exciting projects across the business. No two days will look the same.
YOUR DUTIES WILL INCLUDE:
Maintaining and installing food-grade machinery
Fault finding on electrical systems
Carrying out tasks assigned by the Engineering Manager
Supporting engineering projects from concept to completion
Design work, procurement and stock control
Proactive and reactive maintenance
YOU'LL GET HANDS-ON EXPERIENCE WITH:
Programming
Motors and drives
Pneumatic systems
Hydraulic systems
Electrical fault finding and diagnostics
Training:
Engineering and Manufacturing Technician Level 4 Release for training at TMC - Openshaw Campus (UCEN)
On and off-the-job training - tailored throughout the apprenticeship
Full training is provided, and you'll be supported every step of the way as you develop into a fully qualified EC&I Engineer
Training Outcome:An exciting career pathway with one of the UK's fastest-growing supplement brands, offering full training to become a qualified EC&I Engineer.Employer Description:Engineering company.Working Hours :7.00am - 4.00pm Monday - Friday.Skills: Analytical skills,Attention to detail,Communication skills,Creative,Initiative,IT skills,Logical,Number skills,Organisation skills,Patience,Physical fitness,Problem solving skills,Team working....Read more...
Our client is a leading manufacturer of premium desserts, supplying major retailers and foodservice customers across the UK. They are committed to quality, innovation, and delivering exceptional products to the market.
Job Role & Key Responsibilities:
We are looking for a mechanically biased Maintenance Engineer to join a busy manufacturing environment on a permanent afternoon shift. This hands-on role is responsible for maintaining, repairing and improving production machinery, while also supporting the upkeep of the wider site, including buildings, grounds and workshop facilities. Reporting to the Maintenance Manager, you'll play a key role in ensuring equipment reliability and smooth production operations.
Key Responsibilities:
Diagnose and repair mechanical faults on factory and production machinery
Carry out planned and reactive mechanical maintenance
Maintain and clean production equipment to ensure optimal performance
Support the maintenance of buildings, grounds and general site infrastructure
Assist with machinery repairs, strip-downs and rebuilds where required
Maintain a clean, safe and organised maintenance workshop
Complete maintenance records accurately
Work collaboratively with the Maintenance Manager and wider team
Undertake training as required and support other maintenance activities across the site
The Ideal Candidate will have:
A relevant engineering qualification
At least 5 years' hands-on maintenance or engineering experience
Strong mechanical maintenance and fault-finding skills
Experience working on production or factory machinery
Good record-keeping skills
The ability to work independently and as part of a team
A practical, proactive approach and willingness to support all areas of site maintenance
Desirable Skills:
Experience within manufacturing, factory, FMCG, food production or industrial environments
Knowledge of planned and reactive maintenance
Basic electrical awareness
Experience working with conveyors, motors, gearboxes, pumps, bearings, belts, chains, hydraulics and pneumatics
General fabrication or fitting experience
Flexible, hands-on attitude with a willingness to support wider site maintenance
Benefits Include:
£45,000 salary
Monday to Friday afternoon shift (13:00 – 21:00)
Stable, long-term engineering opportunity
Ongoing training and development where required
Opportunity to work across a varied range of mechanical maintenance and site improvement tasks
Supportive team environment with progression opportunities
If you are interested in this exciting opportunity, please get in touch with us or apply below.....Read more...
An exciting opportunity has arisen for an Electrical Hardware Engineer to join a high-performing engineering team developing cutting-edge flight simulation technology. These systems replicate real-world aircraft environments and play a critical role in pilot training and aviation safety worldwide.
This role offers the chance to work at the forefront of aerospace innovation, contributing to the design and delivery of advanced electrical and electro-mechanical hardware systems in a fast-paced, customer-driven environment.
You will play a key role in the design, development, and delivery of electrical hardware solutions for complex simulation systems. Working within a multidisciplinary team, you will contribute across the full engineering lifecycle, from concept through to validation and delivery.
Key Responsibilities
- Design and develop electrical hardware systems for advanced flight simulators
- Produce technical specifications, schematics, and electrical designs
- Develop power distribution systems (single & three-phase), including protection and cable sizing
- Collaborate with software, systems, and mechanical teams to deliver integrated solutions
- Ensure compliance with industry standards and safety-critical requirements
- Conduct testing, validation, and troubleshooting of hardware systems
- Support EMC design and testing activities
- Engage with suppliers for component selection and integration
- Contribute to continuous improvement and innovation across hardware capabilities
- Support or mentor junior engineers where appropriate
Skills & Experience
- Degree in Electrical / Electronic Engineering or similar
- 510+ years experience in electrical hardware design (aerospace, defence, simulation, or similar)
- Strong experience with:
- Electrical design and power distribution systems
- Electrical CAD tools (schematics, wiring diagrams, panel layouts)
- EMC principles (grounding, shielding, filtering)
- Hardware testing, validation, and troubleshooting
- Knowledge of BS 7671, Low Voltage Directive, EMC Directive
- Experience working across the full product lifecycle (concept to production)
- Strong communication skills and ability to work within multidisciplinary teams
Desirable Experience
- Chartered Engineer (or working towards)
- Experience in flight simulation, avionics, or aerospace systems
- Exposure to computing system integration (rack systems, cooling, data cabling)
- Background in high-reliability or safety-critical environments
Benefits
- Competitive salary + discretionary annual bonus
- Pension (matched up to 7%)
- 25 days holiday + bank holidays (with option to buy/sell)
- Private medical insurance
- Life assurance (4x salary)
- Group income protection
- Employee assistance & wellbeing support (24/7)
- Retail, travel, and leisure discounts
This is a fantastic opportunity for an experienced hardware engineer looking to work on complex, high-impact systems at the cutting edge of aerospace technology.
TT....Read more...
Graduate Manufacturing Engineer – NPI & Industrialisation – London - £33,400 | 12-Month Fixed Term Contract
Kick-start your engineering career in New Product Introduction.
Are you a Mechanical Engineering graduate looking to apply your knowledge in a hands-on manufacturing environment? This is an exciting opportunity to join our engineering team, supporting the introduction of new high-reliability products from design into production.
Working alongside experienced engineers, you'll gain practical experience across manufacturing engineering, process development, tooling, testing and continuous improvement while developing the skills to build a successful engineering career.
The Role
You'll support the industrialisation of new products by:
Assisting with prototype builds, first-off assemblies and new product introductions.
Developing manufacturing processes, work instructions and engineering documentation.
Supporting tooling, equipment and production readiness.
Investigating manufacturing issues and implementing improvements.
Participating in Kaizen and continuous improvement projects.
Working closely with Design, Production and Quality teams to ensure products are manufactured efficiently and reliably.
About You
Degree in Mechanical Engineering or a related engineering discipline.
Knowledge of manufacturing processes and mechanical engineering principles.
CAD experience (e.g. SolidWorks, Creo, Inventor or AutoCAD).
Strong problem-solving and analytical skills.
Keen to learn and develop within a manufacturing engineering environment.
Industrial placements or internship experience are beneficial but not essential.
What's on Offer
£33,400 salary
12-month Fixed Term Contract
Mentoring from experienced engineers.
Hands-on experience across New Product Introduction (NPI), manufacturing engineering and process improvement.
Excellent opportunity to launch your engineering career.
What next?
Send your CV for review and if you’re a good match I’ll get in touch! ....Read more...
My client are seeking an efficient Skilled Maintenance Engineer to be responsible for all tasks involved in maintaining and repairing all factory machinery as required or as directed by the shift supervisor. The Maintenance Engineers have a range of duties that include assessing faulty machinery and diagnosing faults in a timely manner, ensuring minimal downtime.
Engineers are essential to guarantee the smooth running of operaional lines, and other critical equipment across the site, ensuring we can meet the operational timeframes.
To be successful as a Skilled Maintenance Engineer you should be able to carry out all tasks with high attention to detail. Ultimately, a Skilled Maintenance Engineer should be highly organised, able to keep the electronic work log up to date on a regular basis, order and follow up on machine parts, liaise with external contractors and OEM’s as necessary, suggest improvements to working practices to your Engineer supervisor and handover workload and updates on work activity from your shift to the next shift.
About you:
This is an opportunity to be an active team player who is happy to support and be supported in our Engineering department.
You will have an NVQ Level 3 Engineering or equivalent and demonstrable workplace experience alongside proof of multi-skilled qualification/conversion training and demonstrable experience.
HNC in Electrical Engineering or equivalent discipline would be advantageous.
Holding a full, clean driving license is desired.
Previous experience in a similar role or industry is required and will support you in working in our fast-paced environment. Previous manufacturing/production experience is desired and Bindery, Sheetfed or Web Press experience would be advantageous.
You will have strong diagnostic/rectification skills.
You are used to working with fine tolerances.
Happy to be flexible when required with working hours and shift patterns.
You are reliable with a strong work ethic.
You will be comfortable working alone or as part of a small team.
You are comfortable working under pressure
Have a broad engineering skill base.
What we can offer you:
Competitive Salary
Contributory Pension
Company Sick Pay
264 hours Annual Leave
Life Assurance
Free Onsite Car Parking (Subject to Availability)
Health & Wellbeing Support
Working Hours: 36 contracted hours per week + one 12-hour shift every 4 weeks. Sunday, Monday, Tuesday nights 18:00 – 06:00, and; 1 Saturday night 18:00 – 06:00 every 4 weeks
If you want to join a thriving company with a good team spirit, and you can commit to the hours specified, please get in touch so we can progress your application.
....Read more...
Test Engineer - Power Electronics - Aargau, SwitzerlandMandatory Skillset: PCB, Testing, Electronics
Our Client:Is a pioneering family-owned Swiss company specialising in power electronics that designs, manufactures, and supplies high-power RF amplifiers and transmitters for various industries, including broadcasting, telecommunications, military and defence, and scientific research.
Job Summary:We are seeking a skilled Test Engineer to join our client's team, who is responsible for developing test requirements, creating test instructions, and testing PCBs, assemblies, and systems. The ideal candidate will have a strong background in electronics and measurement technology, with practical experience in handling measuring equipment and a good understanding of radio frequency and power engineering.
Main Responsabilities:
Development of test requirements and new test methods in collaboration with the development department
Creation of test instructions and test reports
Testing, repairing (requires e.g. soldering skills) and commissioning of PCB’s, assemblies and systems as well as participation in tests in the test field
Checking production orders and goods receipt material according to quality characteristics
Perform factory inspections with customers
Management of measuring equipment storage
Construction of test facilities for the rationalization of test procedures
Required Competencies:
Completed technical training in the direction of electronics/measurement technology, technician school, an advantage
Practical experience in handling measuring equipment
Knowledge of radio frequency and power engineering is an advantage
Excellent knowledge of German and English
Positive attitude to work
Reliable team player with a pronounced quality awareness
Enjoy working independently
Benefits:
Competitive salary and benefits package – Up to CHF 110k
Opportunity to work on exciting and challenging projects
Collaborative and dynamic work environment
Professional development and training opportunities
Comprehensive benefits package, including health insurance, retirement plan, and more
Flexible working hours and remote work options
30 Days Annual Leave
Location: Aargau, Baden, SwitzerlandSalary: CHF 80-110k + Bonus Benefits
Tech Stack: PCB, Testing & Electronics
Applicants for the Test Engineer position must be based in Switzerland
NOIRSWITZERLANDRECNOIREUROPERECNOIREURNET
NC/TC/TESARG80110....Read more...
This role will be heavily involved with both design and manufacturing, and the day-to-day role will initially involve:
Training and development of 3D CAD modelling utilising SolidWorks
We will then focus on:
Taking these models and creating 2D technical drawings
Printing, issuing and technically supporting the on-site engineers
You will follow your parts through the manufacture process via our on-site production facility, supporting the engineers where required. This allows you to be fully involved with the process from survey through to design, manufacture and installation.Training:
Engineering Manufacturing Technician Level 4
Apprentices will enrol and start at college in September
Apprentices attend Loughborough College 1 day per week during term time. The rest of the time is spent in the workplace with the employer
Dedicated trainer/assessor to visit the apprentice(s) in the workplace
Training Outcome:We aim to enable apprentices to be able to hold the job title of a fully-fledged “Design Engineer”.Employer Description:International Lift Equipment design, manufacture and supply lift equipment to the passenger lift industry within the U.K. We manufacture in house from our Leicester branch whilst having a main headquarters in London and a satellite drawing office in Yorkshire. We engineer bespoke solutions for passenger lifts involving full survey, design and manufacture of the components. These components span both mechanical and electrical and these can be made up of single parts, single assemblies or complete lift packages.Working Hours :Between 8:30am - 5pm (Monday - Thursday) and 8:30am - 4pm (Friday).Skills: Communication skills,IT skills,Attention to detail,Organisation skills,Problem solving skills,Team working,Creative....Read more...
This apprenticeship will combine skills, knowledge and behaviours to be successful in the Process Engineering role. This will include many different disciplines including manufacturing methods, production methods, quality assurance, core engineering principles, engineering and manufacturing documentation and CAD packages, communication techniques, lean methodology and project management. The requirement at the end of the Apprenticeship is to attain Engineering Manufacturing Technician Level 4. Upon completion the role is to develop, implement and maintain efficient manufacturing process and workflow for chemically etched products. Investigating Operational problems affecting production and reporting and recommending solutions. Manufacturing engineering processes:
Organise, implement and maintain production process flow
Develop working instructions, standards and process documents, ensuring these are followed
Manage manufacturing documentation required for product manufacturing i.e. revise drawings, accurate work instructions and workmanship standards and procedures
Provide manufacturing data i.e. production control charts, reliability, process capability
To improve the process and monitor and measure progress targets
Identify ways to reduce production costs through recommendations i.e. new process equipment justification to improve performance 40
Maintenance / Facilities:
Oversees the facilities maintenance, liaise and provide support to the maintenance team where required
Monitor and manage the improvements to the operating utilities equipment and practices
Continually improve existing operations for increased quality, productivity, efficiency, production, reporting and recommending solutions, working closely with the maintenance team
Liaise with suppliers on manufacturing processes and place orders where required
Training:Day release at Solihull College, Chelmsley Wood Campus for first 2 years and 4 days a week onsite at HLD. 3rd year at HLD embedding learning with a view to day release to other Parker sites. Training Outcome:At the end of the apprenticeship, it is a possibility that the successful applicant will be offered a permanent position as a Process Engineer and potentially progress to degree learning.Employer Description:Heatric, a division of Parker Meggitt, is the world’s leading manufacturer and servicer of ‘printed circuit’ diffusion-bonded heat exchangers (PCHEs) for selected energy markets. Applications range from hydrocarbon processing, marine propulsion systems and power generation for clients such as GE, Shell, Petrobras, and ExxonMobil, among many others. With more than 30 years of experience, and thousands of units in operation, Heatric’s global services can minimise unit downtime through preventative maintenance and servicing solutions. Heatric’s purpose is to enable the extraordinary. The company offers world leading capabilities in thermal engineering, etching, diffusion bonding and stainless steel fabrication. Through applied innovation, Heatric is enabling customers to achieve their goals. We are an expanding business and our success means there is a continuous requirement for the best and brightest talents in business, engineering and manufacturing. Working Hours :College hours for day release. HLD hours 8.30am - 5.00pm Monday - Thursday and 8.30am - 2.00pm Friday.Skills: Enthusiastic,Engineering Career Plan....Read more...
Equipment Installation & Maintenance
Working with another member of staff, install, set up, and maintain professional print devices, including both hardware and software
Provide customer training on devices to help users get the most out of their equipment
Diagnose and resolve technical faults, working with other members of the team
Component & Equipment Refurbishment
Take apart and clean imaging drums
Replace worn parts with new and repackage ready for engineer use
Perform toner refills where necessary (all safety equipment provided and instructions)
Identify work to be undertaken using machine management lists
Allocate stock if available, order stock where not to hand
Prepare equipment for refurbishment (remove worn parts, set aside for refurbishment or replacement)
Fully clean all areas of machine using equipment and materials provided
Reassemble all parts inside machine to manufacturer's specification
Test and adjust where required
Clean outer casings and prepare for delivery
Training course and engineer accompaniment
Undertake all web-based learning modules over a 12-month period and obtain a minimum pass rate
Accompany senior engineers and be involved with processes involved in repair and adjustments
Apply learning to equipment in showroom and workshop
Learn proper use of cleaning equipment and techniques
Other duties
Keep warehouse and workshop area clean and tidy
Maintain stock levels of cleaning products and refurbishment parts
Undertake jobs provided by administrator, directors or other engineers when required
Adopt processes to ensure timely and efficient working methods to ensure steady supply of refurbished parts
Make deliveries to sites, engineers and when appropriate undertake straightforward repairs or replace parts, subject to training delivery
Help with deliveries and equipment installations when required
Training:
Level 3 Information Communication Technician apprenticeship
Day release training with Burnley College
Training Outcome:Potential for full-time employment upon successful completion of the apprenticeship.Employer Description:In the last 10 years, Production Print Direct has grown to become the UK’s leading independent specialist for cut sheet digital press technology. We enable our clients to meet the market needs of their customers for what is rapidly becoming a “same day” print service with software to speed up the prepress process and faster equipment to keep on top of production requirements. Whether downsizing or upscaling, PPD have the experience and technology to work with our clients for the next step of their own evolution. Working Hours :9am to 5pm with half an hour lunch (unpaid).Skills: Communication skills,IT skills,Attention to detail,Analytical skills....Read more...
This is a fantastic opportunity to join an industry leading manufacturer in the area of Tamworth.Our client is now seeking to appoint a Controls and Automation Engineer on a Monday to Friday Days only basis. This role requires someone who has very strong knowledge and experience of electrical/automation and PLC systems to join the team. Basic salary of £55,000 per annum, plus fantastic bonus as well as premium OT opportunities taking OTE to over £70K, plus pension matched up to 10%Our client is an industry-leading manufacturing business with a multi-million-pound turnover and impressive growth plans, supported with large-scale investment and an existing established network of manufacturing facilities across the UK.The working culture is friendly, and one that encourages the sharing of best practices, whilst providing a platform for continuous learning and development.What’s In It for You as Controls and Automation Engineer
Base Salary of £55,000 per annum, Plus bonus and OT Opportunities
Pension matched up to 10%
Monday to Friday - Days Only
Extensive training and personal development are available, including accredited training and career development plans for those who want it.
Position Overview of Controls and Automation EngineerThe role will be working as part of the Maintenance Team providing ‘Hands-on’ Electrical & Controls Technical support to both Production and other internal functions throughout the Factory. PLC fault finding and modifications are vital skills to have for the role. You will be solely working with electrical installations, fault finding, and repair of PLC controlled machinery, within a manufacturing environment.Experience with breakdowns, fault finding, and changing of PLC parameters and working with Controls and Automation. Experience of installing servo drives and projects, capex improvements, HMI, and profibus is all required. Siemens S7 training is available.Within the position as Controls and Automation Engineer, you will have the opportunity to be involved with a wide of range of electrical maintenance operations and projects, which will be supported with a wide range of training opportunities, including accredited training programs.Experience and Qualification Required
Recognised Electrical Engineering Apprenticeship & Qualification or equivalent UK level 3 qualification – NVQ, City and Guilds AND BTEC 3 or HNC/HND in Electrical Engineering etc
PLC Fault finding experience and experience with breakdowns, fault finding, and changing of PLC parameters specifically.
The ability to work within a fast-paced manufacturing environment undertaking PPM and TPM activities
High degree of Health & Safety awareness.
Ability to fault find, repair and provide solutions to electrical machinery problems
This is a fantastic opportunity to join an industry leading business with huge opportunity for further training and career development. Please apply now or contact us for more information on 01484 645269....Read more...
What You’ll Do:
Support maintenance of production and packing equipment
Carry out routine servicing and repairs
Assist with breakdown response and fault-finding
Take part in preventative maintenance and improvement projects
Work with teams to improve safety, quality, and efficiency
Gain experience with machinery including robotics and automated systems
We’re looking for motivated individuals who are ready to grow:
Good timekeeping and reliability
Hands-on and practical mindset
A “can-do” attitude and eagerness to learn
Interest in mechanical and electrical engineering
Proactive and positive approach
Think this role is for you? We’d love to hear from you – submit a clear, well-written application showing your interest in engineering, any hands-on experience, and your enthusiasm to learn.Training:Mechatronics Maintenance Technician Level 3.
Structured apprenticeship training with MK College
Hands-on experience in a real manufacturing environment
Support from experienced engineers
Opportunity to progress into a qualified
Maintenance Engineer role
Potential for further qualifications and long-term career growth
Training Outcome:After the apprenticeship, you could be offered the opportunity to study and achieve further qualifications and become part of the maintenance engineers working on shift.Employer Description:At Jordans Cereals, we produce some of the UK’s favourite breakfast cereals and cereal bars, including Jordans and Dorset Cereals. Our site is home to advanced production and packing technology—and our engineering team plays a vital role in keeping everything running smoothly.Working Hours :Monday to Friday, 8:00am - 4:00pm.Skills: Good communicator,Reliable,Team Player....Read more...
Learn to set up and operate CNC machines to manufacture precision components.
Read and interpret engineering drawings and specifications.
Produce high-quality parts safely and accurately.
Use manual machinery and a variety of hand tools.
Assist with machine set-up, proving and production processes.
Work alongside experienced engineers and manufacturing staff.
Follow health and safety procedures and ISO quality standards.
Help maintain a clean, organised workspace using 6S principles.
Develop problem-solving, communication and teamwork skills.
Work towards a Level 2 Engineering Operative apprenticeship qualification.
Training:An apprenticeship includes regular training with a college or other training organisation. At least 20% of your working hours will be spent training or studying.Training Outcome:Successful completion of the apprenticeship could lead to a permanent CNC Operator position. With further experience and training, you'll have opportunities to progress into roles such as CNC Programmer, CNC Setter/Operator, Production Engineer or Manufacturing Supervisor, building a long-term career in engineering.Employer Description:EVAC+CHAIR International is a leading UK manufacturer and global supplier of emergency evacuation equipment. With over 40 years of experience, the company designs, manufactures and distributes high-quality evacuation chairs and safety solutions used in hospitals, schools, offices, transport hubs and public buildings around the world. Committed to innovation, quality and employee development, EVAC+CHAIR provides a supportive environment where apprentices can gain valuable skills and build a rewarding career in engineering and manufacturing.Working Hours :Monday – Thursday 7am -4pm. Friday 7am – 12pm.Skills: Communication skills,IT skills,Attention to detail,Organisation skills,Customer care skills,Problem solving skills,Presentation skills,Administrative skills,Number skills,Analytical skills,Logical,Team working,Creative,Initiative,Non judgemental,Patience,Physical fitness....Read more...
CNC Miller Setter OperatorFull Time, PermanentCompetitive Salary & Benefits PackageOur client is a precision engineering business specialising in high-quality composite machining work for demanding industries, including aerospace applications.They are now looking to recruit an experienced CNC Miller Setter Operator to join their growing manufacturing team.This opportunity would suit an experienced CNC Miller who is confident setting and operating CNC milling machines within a precision engineering environment. Candidates with some turning experience would also be welcomed.Role overviewThe successful candidate will be responsible for setting, operating and optimising CNC milling machines to produce precision-engineered components to tight tolerances.Working within a busy manufacturing environment, you will play an important role in ensuring production targets, quality standards and continuous improvement objectives are achieved.You will work with a range of machinery and controls including:
HAASDMGDoosanMazakFanucSiemensHeidenhain
Key duties
Setting and operating CNC milling machines efficiently and accuratelyEditing and adjusting programmes where required for production optimisationProducing components to tight tolerances and high-quality standardsWorking from engineering drawings, samples and sketchesCarrying out first-off, stage and final inspectionsCompleting relevant production and inspection paperworkSupporting lean manufacturing and continuous improvement initiativesWorking closely with planning and production teams to improve manufacturing methodsMaintaining machinery and ensuring excellent housekeeping standardsSupporting and encouraging apprentices where requiredFollowing all health and safety procedures at all times
Skills and experience
Previous CNC milling setting and operating experienceExperience working within a precision engineering environmentKnowledge of Fanuc, Siemens, Heidenhain or similar controlsStrong understanding of engineering drawingsAbility to work accurately to tight tolerancesPositive and proactive approach to workAerospace manufacturing experience would be advantageousExperience machining composite materials would be beneficial
Interested in this CNC Miller Setter Operator role? Please apply with your latest CV. CNC Miller, CNC Setter Operator, CNC Machinist, CNC Programmer, CNC Operator, CNC Milling, Precision Engineer, Manufacturing, Fanuc, Heidenhain, Siemens, HAAS, Mazak, Doosan, Aerospace INDHS Equals One is an advertising and recruitment agency working on behalf of our client to promote this vacancy. You may be contacted directly by the employer should they wish to progress your application. Due to the number of applications we receive, we are unable to provide specific feedback if your application is unsuccessful.....Read more...
Work towards completing the engineering apprenticeship, including on the job learning and college requirements
Develop core mechanical and electrical skills for tissue converting, packaging and automation equipment
Build competence in fault finding, diagnostics and basic repairs under supervision
Support planned preventative maintenance (PPM) activities to keep equipment safe and reliable
Assist with breakdown response and learn to identify root causes and corrective actions
Maintain accurate engineering records, logs and documentation
Follow all Health and Safety procedures, maintain 5S standards and report hazards promptly
Contribute to continuous improvement projects and support engineering upgrades and installations
Work collaboratively with Engineers, Supervisors and the Production team
Communicate clearly, show initiative and demonstrate a positive, proactive attitude toward learning
Training:
Attendance to Loughborough College one day per week, term time only where you will study set units that map directly into your apprenticeship
Diarised visits from dedicated Trainer / Assessor
On-the-job training
Off-the-job training
Training Outcome:Progression into the Mechanical Engineer role, then the Multi-Skill Shift Engineer role.Employer Description:Navigator Tissue UK is a major UK manufacturer of tissue and hygiene products, operating modern, high volume sites and supplying leading national retailers with toilet tissue, kitchen towel, facial tissues, and wipes. Now part of The Navigator Company, the business combines strong industrial capability with a people first culture, and investing in training, safety, and continuous improvement. With a clear focus on sustainability, supported by FSC/PEFC certifications, ethical sourcing standards, and responsible manufacturing. Navigator positions itself as a stable, values driven employer, offering long‑term opportunities in a fast moving FMCG environment.Working Hours :Monday - Friday 9.00am - 5.00pm.Skills: Communication skills,IT skills,Attention to detail,Problem solving skills,Non judgemental,Patience....Read more...
We are hiring an Electronics design Engineer to design and develop power electronic systems, including motor drives and power conversion products, from concept through to production. You’ll work in a multidisciplinary R&D team, focusing on circuit design, testing, validation, and troubleshooting.
Key Responsibilities
Design and test power electronic circuits and PCB assemblies
Perform simulation, prototyping, and validation
Create technical documentation (schematics, BOMs, reports)
Troubleshoot and resolve design and field issues
Support the V-model development lifecycle
Drive continuous improvement and design optimisation
Key Requirements
Degree in Electronics Engineering (or similar)
2+ years’ experience in power electronics / motor drives
Experience with high or low voltage systems
Knowledge of power semiconductors, gate drives, and control circuits
Strong testing, fault finding, and documentation skills
Desirable
EMC, PCB layout, and magnetic component design
Knowledge of DfM, DfT, and regulatory standards
Apply Now
If you are interested, please send an updated CV to nking@redlinegroup.Com or call 01582 878839 for more details.....Read more...
THE ROLE
We are currently seeking a PRINCIPAL / ASSOCIATE STRUCTURAL ENGINEER to join our client based in Leeds.
This is an excellent opportunity to join a growing firm of consulting engineers who offer the right candidates interesting projects to work on and good prospects for promotion.
You will be involved in doing structural engineering design, organisation and team management etc. for a wide variety of project types including Hospitals, Commercial offices, Schools, Residential, Industrial, Waste Handling and Waste Recycling Plants, Prisons plus Decarbonisation for Hospital projects.
You will be responsible for overseeing the production of technical drawings, calculations and specifications plus you will collaborate with multi-discipline teams to develop integrated design solutions.
You will also mentor less experienced engineers, deal with clients etc.
THE CLIENT
Our client is a successful, growing firm of consulting engineers with a number of UK offices.
THE CANDIDATE
You will need to have experience of the following:-
You must have a BSc in Civil or Structural Engineering.
You will be Chartered or almost chartered.
You should have around ten years’ experience as a Structural Engineer and have broad based structural design experience across a range of building structures.
You need to have gained experience of a variety of structural engineering software for structural analysis and design.
You must have excellent written and spoken English to be able to deal with clients and multi discipline consultants and contractors.
You should have good knowledge of U.K. codes and U.K. regulations.
You need to have spent several years working for a similar engineering consultants in the U.K. working on U.K. projects.
A full UK driving licence is required along with your own vehicle to enable you to attend meetings and get to sites, some of which may be fairly remote.
Salary is negotiable and there is an excellent package of company benefits.
Please email a full c.v. or give me, Toby Melling a call for an informal and confidential discussion on 020 7613 5555 or 020 8368 0025 or mobile 07740 067025.....Read more...
DevOps Engineer – Global Engineering Company - Berlin (Remote)(Tech Stack: Kubernetes, AWS, Azure DevOps, GCP, Jenkins, Docker, GIT, CI/CD Pipelines, Linux)
Client:Our client, a well-known international renewable energy engineering company is seeking a talented DevOps Engineer to join its team in Berlin.
Our Client has over 10,000 employees worldwide and it leads the field in developing innovative solutions that harness the power of the sun, wind, and water. Due to a recent round of funding, they need three DevOps engineers to help design, deploy, and maintain its cloud infrastructure and DevOps processes.
If you are seeking exciting projects contributing to a sustainable future and an opportunity to work with the latest technologies this is the job for you!
Benefits:
Competitive salary: €70,000 - €95,000 + Bonus Benefits
Opportunity to work on exciting projects that drive positive change
Remote work options with flexible working hours
Comprehensive benefits package, including health insurance, retirement plan, and more
30 Days Annual Leave
Responsibilities:
Collaborate with development and quality assurance teams to develop, modify, and maintain our cloud infrastructure and DevOps processes
Implement and maintain automated CI/CD pipelines to ensure smooth deployment of microservices in test and production environments
Use Infrastructure-as-Code and GitOps technologies to maintain our Kubernetes clusters and infrastructure
Support the team in maintaining legacy applications hosted in Azure
(Familiarity with most of the following technologies: CI/CD, GitHub, Jenkins, Bitbucket Pipelines, Azure DevOps, GIT, Docker, Kubernetes, Linux)
Requirements:
Strong knowledge of CI/CD tools (GitHub Actions, Jenkins, Bitbucket Pipelines, Azure DevOps, etc.) and version management tools (git)
Experience with public cloud environments (Azure, AWS, or GCP)
Knowledge of container technologies (Docker, Kubernetes, etc.) and Linux systems
Understanding of Infrastructure-as-Code (Terraform/OpenTofu, Ansible, etc.) and GitOps (e.g. Flux) technologies
(CI/CD, GitHub, Jenkins, Bitbucket Pipelines, Azure DevOps, GIT, Docker, Kubernetes, Linux)
Fluent in English & German
Location: Berlin (Remote)
NOIRGERMANYRECNOIREUROPERECNOIREURNET
NC/TC/CLOBER7095....Read more...
An exciting opportunity has arisen for a self-motivated individual who would like to join a progressing company. This role is based within an established Production department; therefore, a strong team player attitude is essential.
Duties and Responsibilities
Training towards:
Shall be fully committed to the achievement of the company policies and objectives with attention to quality and safety
Produce all spares, paint and other Dymo labels as required
Scan, save and distribute signed MMRs
Create and distribute new MMRs
Check nameplate/tag templates produced by others, prior to engraving
Produce nameplate/tag templates for checking
Manufacture nameplates/tags using the laser engraver
Produce packing/shipping and marking templates using the stencilling machine
Liaise with internal departments (e.g. Purchasing/Expediting) to resolve material shortage issues
Co-ordinate and replenish Production consumables & PPE
Co-ordinate and replenish stock timber and packing cases
Update the A1 live list and Ready for Despatch Movement List (RDML), to communicate current order status/progress and completion
Prepare Standard Route Cards for new orders processed by Sales
Issue Route Cards to QC/Stores, to trigger materials being issued to shop floor in a timely manner
Communicate with the Production Assembly Lead to support delivery against agreed schedules
Act as a point of contact for Sales regarding Standard order progress, under guidance
Provide team support during holidays or absence, under guidance
Assist with general production troubleshooting activities
Make recommendations for renewal/replacement of plant and equipment
Obtain authority from senior management prior to commitment of expenditure
Ensure safe working practices are always adhered to; this applies to internal and visiting personnel
Undertake reasonable instructions and tasks from senior personnel, commensurate with the nature of the job and in the best interests of the company
Staff Relationships:
Directly responsible to the Production Planning Manager
Works closely and communicates with all Production team members
Communicates with all other internal departments
Liaises with clients and client inspectors, when required, under supervision
Has proactive involvement with internal and external quality audits
Training:All training will take place at the workplace, there is no day release to college for this apprenticeship.
Upon successful completion of this apprenticeship you will receive a Level 3 Business Administration qualification
You will be assigned an assessor who will visit you in the workplace every 6-8 weeks to support you on your apprenticeship
Functional Skills may be required as part of this apprenticeship
Training Outcome:Career progression shall be within the office based Production team from an initial mainly administrative role, to that of Production Co-ordinator (Standard orders first, eventually leading onto Mod-Standards and Projects) and potentially eventually through to Production Engineer.Employer Description:Barton Firtop Engineering is a competitive designer, manufacturer, and supplier of Strainers, Filters, Separators, Coalescers, and Flame Arresters, predominantly serving the Oil & Gas Industry. We specialise in product design and project management, ensuring on-time delivery of strainer and filtration equipment that meets complex specifications for materials, manufacturing, NDE, documentation, and Quality Control.
Our in-house expertise includes advanced 3D Modelling, Finite Element Analysis (FEA), and Computational Fluid Dynamics (CFD), enabling us to design and certify to ASME VIII, Division 1 and PD5500 pressure vessel codes. We offer both fabricated and highly competitive cast designs.
Barton Firtop operates a custom-built manufacturing plant in Worcestershire (UK), which includes a pipework/vessel fabrication division. Additionally, we wholly own a competitive manufacturing facility in Goa, India, which supplies fully machined and tested cast products sourced from high-quality ISO-approved foundries. Barton Firtop India has been a trusted supplier to worldwide projects via our UK head office for over 20 years.
Please note that Barton Firtop reserves the right to bring forward the closing date of any job vacancy if a suitable number of quality applications are received from which to make a shortlist. Therefore, we recommend applying as soon as possible rather than waiting until the published closing date.Working Hours :Monday to Friday
07:00- 15:30
We operate a flexi-time policy to enable employees to choose their preferred working pattern, i.e. start/end times of their working day, within timeframes set by the company and agreed by line managers.Skills: Communication skills,Attention to detail,Initiative,Knowledge of Microsoft,Engineering interest preferred,Professional Presentation,Flexible,Reliability....Read more...
TIG WelderActon£32,000 - £35,000 Basic + Job Security + Stability + Job satisfaction + Work life balance + Family feel + Low staff turnover + Training + Holidays + Pension+ optional overtime
Are you an experienced TIG Welder with strong aluminium and stainless steel welding skills? Would you like to join a well-established manufacturer that offers long-term job security, job satisfaction , and a supportive working environment?
This is an excellent opportunity to become part of a market-leading business with over 75 years of success within its industry. You'll join a skilled and close-knit team, manufacturing high-quality products while benefiting from stability, support, and genuine long-term career prospects.
The Role Of The Welder Will Include:
TIG welding stainless steel and aluminium components
Producing high-quality welds to fine tolerances and detailed engineering drawings
Working both independently and as part of a specialist manufacturing team
Maintaining high standards of quality and workmanship
Monday to Friday, days-based position
The Successful Welder Will Have:
Previous experience as a TIG Welder
Strong TIG welding experience with both stainless steel and aluminium
Ability to work to high-quality standards and tight tolerances
Strong attention to detail
Positive attitude and strong work ethic
Able to commute to Acton, London
To apply or for more information, please contact Becka for immediate consideration.
Keywords: TIG Welder, Welder, TIG Welding, Aluminium Welder, Stainless Steel Welder, Fabricator Welder, TIG Fabricator, Metal Fabricator, Sheet Metal Worker, Skilled Welder, Precision Welder, Coded Welder, Workshop Welder, Production Welder, Industrial Welder, Welding Technician, Stainless Steel Fabricator, Aluminium Fabricator, Mechanical Fitter, Engineering Technician, Manufacturing Engineer, Manufacturing, Engineering, Fabrication, Mechanical Assembly, Workshop Technician, Production Engineering, Welding Jobs, Fabricator Welder Jobs, TIG Welder Jobs, Aluminium Welding, Stainless Steel Welding, Engineering Workshop, Manufacturing Jobs, Permanent Welder, Days-Based Welder,Acton, West London, London, North Acton, South Acton, East Acton, Park Royal, Ealing, Greenford, Southall, Hanwell, Brentford, Chiswick, Hounslow, Hayes, Uxbridge, Wembley, Harlesden, Perivale, Hanger Lane, Hillingdon, Brent, Greater London, Middlesex.....Read more...
