Highways Design Principal Engineer
3 months on-going contract, Inside IR35
Kingston
About the role
The Principal Engineer is responsible for the management of the relevant service within Highway and Transport and to provide specialist professional advice relevant to your team's area of responsibility. Depending on the role, you will need to deliver excellence in sustainable transport and strategy - leading on developing our projects and programmes and engaging with our communities and stakeholders, and/or excellent management of detailed design and delivery, and contractor management - either in highways, traffic, or street lighting field of expertise
Job Purpose
To progress and secure the effective project management of assigned projects through relevant stages from conception through to implementation and monitoring.
To undertake the role of Project Manager for large, complex and multi-disciplined projects including consultation, programming, planning and coordination.
To co-ordinate, prioritise work, establish work programmes and schedules for the assigned functional areas of work and ensuring their achievement and provide or secure technical guidance and training as necessary in this connection.
To develop, design, consult, progress and implement measures to improve the boroughs Highway and Transport network.
To assist in the analysis of service requirements and the development, review and monitoring of performance indicators by which the quality, efficiency and cost effectiveness of the work of the Team or Service is demonstrated.
To be responsible for ensuring that your team conforms to the councils quality standards, standing orders, and relevant legislation.
To participate in the production, development and review of contracts, technical codes of practice and the tendering process from pre-feasibility to post implementation reviews for the assigned functional areas of responsibility.
To manage and administer contracts with consultants and contractors.
To provide or secure the provision of technical advice on all matters covered by the assigned functional areas within the Service.
To assist in preparing advice to senior management and Council on the effects of relevant new or draft legislation, Codes of Practice or other initiatives, publications or developments, ensuring that appropriate Members and other interested parties are properly briefed and advised.
If interested in the role, please contact me at moeez.muhammed@servicecare.org.uk....Read more...
Time served / Apprentice trained Maintenance Electrician / Electrical Craftsperson is required for permanent position for a Manufacturing company in the Bury / Whitefield M45 area. Rate of pay is approx.. £48k pa incl. shift allowance (likely earnings to be circa £50k - £60k pa including regular O/T) plus benefits (see below). The successful candidate will be working a 4 week rotating, continental shift pattern, average of 42 hours/week (12 hour days & 12 hour nights, with 7 consecutive days off in a 4 week rotation).
The ideal candidate will have prior experience of working in an industrial manufacturing environment and be familiar with three phase / 440v, single phase and DC control systems (incl. motor and heating), industrial electrical installations and industrial manufacturing machinery.
Package:
£48k pa incl. shift allowance (weekly paid).
Regular overtime readily available, likely earnings to be £55-65k pa
33 days holiday allowance (6 hrs / half days can be taken)
Pension
Life assurance
Working Hours:
Continental shift pattern across 4 weeks - 12 hours shifts (Days 6am – 6pm & Nights 6pm - 6am)
4 week shift rotation example:
Week1: 1D, 3N, 3 OFF
Week2: 1 OFF, 3D, 3 OFF
Week3: 4 off, 3N
Week4: 4 off, 3D
Week5: 1D, 3N, 3 OFF
And so on.
The successful Maintenance Electrician / Electrical Maintenance Technician / Industrial Electrical Craftsperson day to day duties will include:
Diagnose and repair electrical problems on industrial and occasional domestic electrical systems – Including 3 phase motor control, DC motor control and Siemens control systems
Assess the parts needed for a job
Conduct routine preventative maintenance and testing
Rewire faulty electrical systems
Ensure good quality workmanship which upholds company standards and complies with industrial codes and follows safety requirements
Ability to work alone and also work within a team
Install electrical systems to 17th / 18th edition regs.
The ideal Maintenance Electrician / Industrial Electrical Craftsperson will have the following experience, skills and characteristics:
Completed relevant maintenance engineering apprenticeship i.e. NVQ L3 / C&G L3
Recent experience as an Electrical Maintenance Engineer in a manufacturing environment.
Relevant electrical engineering qualification and knowledge of current electrical wiring regulations 17/18th
Good working knowledge Three phase, single phase and DC control systems – including motor and heating
Able to follow relay ladder logic wiring diagrams
Industrial Electrical installation experience.
Basic understanding of mechanical, pneumatics, hydraulics repairs
Able to work under pressure, work safely, excellent problem solving skills, attentive and a logical thought process.
Ability to read electrical drawings
Good communicational skills (Oral, Reading & Writing), able to communicate at all levels.
HNC or higher Electrical Engineering qualification (desirable)
Testing and Inspection with PAT – (desirable)
Basic knowledge of a PLC’s / Siemens control system – recognition of Inputs and Outputs (desirable)
Basic knowledge of variable speed drives AC/DC (desirable)
This position could be right for you if you want to work as any of the following: Industrial Electrician, Electrical Craftsperson, Electrical Maintenance Engineer, Maintenance Electrician, Multi-Skilled Maintenance Engineer / Technician, Shift Engineer, Electrical Field Service Engineer, Maintenance Technician, Multi-Skilled Engineering Technician.
Key Words: Maintenance Electrician, Electrical Craftsperson, Electrical Maintenance Engineer, Industrial Electrician, Multi-Skilled Maintenance Engineer, Timeserved, Apprenticeship, 3 phase, single phase, PLC’s, Siemens, Control Systems, Motors, Drives, 17th / 18th Edition, Fault Finding, Industrial Engineering, Heavy Engineering, Lean, Manufacturing, Production, Pneumatics, Hydraulics, Mechanical, Permanent, Conti Shifts, Nights, Bury, Bolton, Rochdale, Oldham, Stockport, Manchester, Lancashire,
The successful Electrical Maintenance Engineer / Maintenance Electrician will need to be flexible as there will be a requirement work additional hours as and when the business requires and other duties not mentioned in this job description. You will also have the relevant qualifications and experience, be self-motivated / pro-active, able to work under pressure, well organised, analytical, logical, able to communicate at all levels, work alone and also as part of a team.
If you are interested in Maintenance Electrician / Industrial Electrical Craftsperson role and meet majority of the above criteria please click on the apply now button....Read more...
Sign Maker / Fitter
Location: Horsham, West Sussex
Salary: £28k - £32k (DOE) + Excellent Benefits
Full-Time, Monday - Friday, 8:00am - 4:30pm
The Client:
Our client, specialises in signage, displays, and promotions, providing a diverse range of products and services to businesses, clubs, and organisations.
The Role:
As a Sign Maker / Fitter, you will play a pivotal role in production of various signs using multiple substrates and technologies.
Responsibilities:
* Preparation and application of vehicle graphics, including partial wraps.
* Conducting site installations with precision.
* Operating large format printing equipment effectively.
Requirements:
* Previously worked as a Sign Maker, Sign Fitter or in a similar role.
* At least 3 years' experience in the sign-making industry.
* Experience in large format printing.
* Skilled in general sign making, SAV prints, and CAD cut graphics.
* Valid driving licence with no more than 3 penalty points.
Benefits:
* Competitive salary
* Bonus scheme
* Company events
* 20 days + 8 bank holidays
* 3 annual bonuses (April, Oct & Dec)
Apply now for this exceptional opportunity to work with a dynamic team and further enhance your career.
Important Information: We endeavour to process your personal data in a fair and transparent manner. In applying for this role, Additional Resources will be acting in your best interest and may contact you in relation to the role, either by email, phone or text message. For more information see our Privacy Policy on our website. It is important you are aware of your individual rights and the provisions the company has put in place to protect your data. If you would like further information on the policy or GDPR please contact us.
Additional Resources Ltd is an Employment Business and an Employment Agency as defined within The Conduct of Employment Agencies & Employment Businesses Regulations 2003.
Keywords: Sign Fitter, Sign Maker, Sign Installer, Signage Installer, signage, engineer, sign writer, jobs, sign designer
....Read more...
Multiskilled Maintenance Engineer£35,000-£40,000Monday-Friday8am-4pmPudsey My Client who is a leading manufacturer within their field is seeking an experienced Multiskilled Maintenance engineer to join their team due to the current Maintenance Engineer retiring. This will be a sole position where you are responsible for Maintenance of all machinery onsite. Ideally you will be a competent Maintenance Engineer with an electrical bias. Responsibilities:
Assisting with major breakdowns by carrying out root cause analysis.Improving machinery when necessary Providing plausible solutions to prevent re-occurrence of machinery issues.Minimise machine downtime.
Personal Attributes:
Hands on approach to machine maintenance.Fault finding and diagnostic ability.Safe approach to all work tasks.Excellent communication and interpersonal skills.Organisational and planned approach.Problem solving attitude.Knowledge/Qualifications in electrical and mechanical engineering disciplines.Multi skilled engineer in a manufacturing or production environment.
Key Skills:Multi-Skilled Maintenance Engineer, Mechanical Maintenance Engineer, Electrical Maintenance Engineer, Maintenance Engineer, Multiskilled Maintenance Engineer Please contact clare.butler@winsearch.uk for more information.Winsearch acts as an employment agency for permanent staff. We recruit for roles based in Engineering & Manufacturing, Food & Drinks, Pharmaceutical, Supply Chain & Procurement and Professional Services. View our latest jobs today on our website http://www.winsearch.uk and follow us on LinkedIn.ManHOur clients and their customers come from diverse backgrounds and so do we. We hire our people from various walks of life, each of whom make our company stronger with their talent, uniqueness, and expertise. This is what makes our company special; if you want to help us grow and take this ethos to our clients, then we cannot wait to collaborate with you!
The UK has now left the European Union. Any EU, EEA or Swiss citizens living in the UK that wish to remain in the UK post Brexit need to apply to the EU Settlement Scheme. Although the closing date for applications was 30th Jun 2021, if you have not yet applied but believe that you would qualify under the EU Settlement Scheme, the Home Office have confirmed that they will consider late applications. For further information please see https://www.gov.uk/browse/visas-immigration/eu-eea-swiss
Many Thanks....Read more...
Realistic earnings over £40,000 per annum. Working permanent day shifts with early finishes on Fridays, regular overtime available paid at 1.5 and 33 days holiday. This will give the right candidate an opportunity to work with state of the art machinery, delivering high-quality precision engineering solutions with this impressive sub-contract precision engineer. Due to a growing order book we are looking to speak to a skilled CNC miller with a proven track record within their industry. CAD/CAM experience is not essential but would be a distinct advantage. The right candidate could follow a progression path into a programming role.
Based in Halifax, the successful candidate will easily be able to commute from Oldham, Rochdale, Huddersfield, Bradford, Wakefield and Leeds. Key responsibilities of the CNC Miller will include:
Interpret technical drawings and specifications to manufacture components to given spec.
Perform tool changes, fixture adjustments, and machine offsets to ensure precise and efficient machining processes.
Monitor machine operations and conduct regular quality checks to verify the accuracy and consistency of the produced components.
Collaborate with the engineering and production teams to optimize manufacturing processes and improve overall efficiency.
For the CNC Miller role, we are keen to receive applications from individuals who possess:
Ideally a recognised Apprenticeship within Mechanical Engineering, Machining or similar (NVQ Level 3 or higher) – this is not essential
Worked as a CNC Miller, Machinist, Programmer, Engineer or Technician previously within a precision engineering or machine shop environment
The ability of independently programming using ISO or conversational controls
Working Hours of the CNC Miller:
Standard day shift - 40 hours per week.
Monday to Thursday - 07:30AM – 17:30PM
Friday - 07:30AM – 11:30PM
In return the CNC Miller will receive:
Renumeration: Up to £36,000 per annum (£18 per hour)
Genuine progression opportunities. CAD/CAM, programming etc
Overtime: Regularly available and paid at 1.5 – usually 6+ hours available midweek and on Saturday AM
Holiday Entitlement: 33 Days
Company Pension Scheme (enrolled after 3 months)
To apply for this vacancy, please click “Apply Now” and attach a copy of your CV. Alternatively, please contact Conor Wood at E3 Recruitment for more information.....Read more...
JOB DESCRIPTION
Job Title: Corporate Project Manager
Location: Vernon Hills, IL
Department: Corporate Engineering
Reports To: Sr. Manager
Direct Reports/Manages others: No
Hybrid Schedule: Our hybrid work environment includes two (2) remote days/week.
Rust-Oleum Corporation is a worldwide leader in protective paints and coatings for both home and industry. We offer a wide range of products including decorative fashion paints, durable industrial roof repair coatings and, of course, our famous rust-fighting formula that started it all.
JOB PURPOSE:
The Corporate Project Engineer is accountable for providing capital engineering support within Operations. This includes executing engineering projects for capital installations $200M+, project management from design through startup, and providing long range technical planning and strategies for the business.
RESPONSIBILITIES:
Responsible for capital project execution including equipment selection, justification, CAR processing, purchasing, and installation. Support start-up efforts including in person training and documentation. Design, recommend, and implement manufacturing systems that are designed for machine, human interaction, method/process, raw material & environmental variability. Design to incorporate Lean principles to improve reliability, ease of use & maintenance, minimize changeover times, and to minimize production losses. Provide cross functional project management across key areas including RD&E, Finance, Marketing, & with other Rust-Oleum locations Manage projects through design review process from project scope charters through successful startup transition to the local site team. This includes working with the plant operational teams on providing training, writing appropriate standard operating procedures, and maintenance training plans & parts. Apply the Process Safety Management (PSM) regulations to day to day operations and capital project work. This includes writing appropriate procedures, conducting Change Management paperwork, knowing and applying electrical and hazard codes, signing off on Hot Work and Confined Space, correctly using contractor safety guidelines, and timely equipment inspections/certifications. Frequent interface with plant personnel, operators, coordinators, and maintenance personnel across a 3-shift operation.
REQUIREMENTS:
BS in Mechanical Engineering or Chemical Engineering preferred. Industrial and Electrical Engineers with hands-on mechanical & chemical experience will also be considered. 7+ years of engineering job experience. Good project management, written and verbal communication skills are required along with a high level of initiative. Demonstrated strong leadership skills, in project and people management in a continuous improvement environment in the areas of production, safety, quality and Lean manufacturing principles.
From big benefits to small, we take care of our associates! After 30 days of employment, you will be eligible for a benefits package that includes medical, dental, life, disability and business travel insurance, flexible spending accounts, EAP, stock purchases and much more. We also offer a 401(k) plan after three months of employment. Associates are vested in the RPM Pension plan after completing five years of service. Rust-Oleum offers 9 paid holidays and two floating holiday per year. You are also eligible to earn three weeks of vacation on an annualized basis. Rust-Oleum is an equal opportunity employer. Employment selection and related decisions are made without regard to sex, race, age, disability, religion, national origin, color, or any other protected class.Apply for this ad Online!....Read more...
GPW Job Ref: E113299
Offline CNC Programmer with EDGECAM CAD/CAM experience required ASAP for a permanent position in the Knutsford Area. The salary is up to £32,500 DoE + Bens. The basic working week is 37.5 hours, Mon to Fri 8:00am – 4:30pm with hybrid working available upon successful completion of training.
Salary & Benefits:-
Up to £32,500 pa (DoE)
HoW: 37.5hrs, Monday to Friday 8am – 4:30pm, Hybrid working available upon successful completion of training
25 days holiday plus bank holidays
Enhanced Company Pension Plan & Life Assurance
Occasional O/T
Yearly company bonus
Rest room with TV, drinks & snacks machine, fridges, microwaves and sandwich ordering service.
Job Purpose: To generate programs to produce components on in-house CNC machines.
The successful Offline CNC Programmer (EDGECAM) day to day duties will include:
Produce programs for in house CNC manufactured items from drawings received from Design Engineers.
Inform Design Engineers of billet sizes for BOM purposes for tooling. Ensure CNC programs are available for release to the machine operator through DNC link.
Produce Pro-Report drawing for use by machine operator.
Liaise with shop floor to relay accurate machining information.
Assist the Design Team where appropriate.
Ensure that all documentation is maintained on a day to day basis.
Ensure that all information is stored in the appropriate manner
Assist colleagues and customers with problems that arise offering practical and appropriate solutions.
Deal professionally, competently and courteously with customers and colleagues in verbal and written communications.
Support the Production Office Coordinator in monitoring and maintaining schedules and plans to
Reflect changes in priorities and deadlines
The ideal Offline CNC Programmer (EDGECAM) will have the following experience / characteristics:
Completed relevant engineering apprenticeship such as a CNC / Manual machinist, Toolmaker, Mechanical Engineer.
Recent experience of using Hexagon’s EDGECAM CADCAM offline CNC programming software
Previous experience of setting and operating CNC Milling machines.
Able to read engineering drawings and use had held dimensional measuring equipment.
Must have undertaken formal training in CNC programming
Must have excellent interpersonal and communication skills (verbal and written) to communicate effectively with customers and colleagues.
Highly motivated and keen to succeed.
Attended training courses run by relevant software / machine manufacturers (advantageous)
PTC / Creo (Pro-Manufacture or Pro-Engineer) programming experience (advantageous)
Experience of manufacturing components, jigs and fixtures in a variety of metals to fine tolerances (advantageous)
Key Words: C.N.C, Offline CNC Programmer, CAD/CAM, EDGECAM, Hexagon, Creo, Pro-Manufacture, NX CAM, Solid Edge, DelCAM, Powermill, Catia, Pro-Engineer, C N C, Milling, Machinist, Machine Programmer, CADCAM, CAD Designer, Precision, Toolmaker, Fanuc, Manufacturing, Engineering, Knutsford, Altrincham, Warrington, Permanent, Full Time, Hybrid, Cheshire
The successful Offline CNC Programmer ((EDGECAM – CAD/CAM) will need to be flexible and be able to work overtime if required. Will have previous experience of working in a busy manufacturing environment, you will have a standard-level education, have the relevant qualifications or experience, be punctual, conscientious, keen and have a practical approach to work.
If you are interested in Off-line CNC Programmer (EDGECAM – CAD/CAM) role and have the required experience please click on the apply now button....Read more...
JOB DESCRIPTION
Job Title
: Senior Packaging Engineer
Location: Vernon Hills, IL
Department: Packaging Engineering
Reports To: Director, Packaging Engineering
Direct Reports/Manages others: No
Hybrid Schedule: Our hybrid work environment includes two (2) remote days/week.
Rust-Oleum Corporation is a worldwide leader in protective paints and coatings for both home and industry. We offer a wide range of products including decorative fashion paints, durable industrial roof repair coatings and, of course, our famous rust-fighting formula that started it all.
JOB PURPOSE:
The Senior Packaging Engineer is responsible for project management of packaging initiatives on cross-functional teams that support Brand Marketing new product development and continuous quality and cost improvement projects. This position reports to the Director Packaging Engineering and will support the team function in driving the development and implementation of new or improved packaging processes, quality assurance and cost controls of packaging design and materials.
RESPONSIBILITIES:
Develop new packaging designs and specifications through collaboration with cross functional project teams to meet internal and external customer requirements. Develop ideas for packaging innovation, quality improvements, cost savings, and sustainability that are relevant to the business. Participate as an active member of cross-functional business teams comprised of individuals from a variety of disciplines, including Product Management, Manufacturing, R&D, Quality, Sourcing, and Purchasing. Design, coordinate, and complete performance and compatibility testing in support of packaging component changes at both internal manufacturing and external contract manufacturing sites Works in conjunction with and is a resource for Sourcing Managers, Purchasing, Manufacturing Plants, Quality and Distribution Centers to ensure successful testing protocols and plant trials on packaging materials. Collaborates with packaging material vendors to develop, establish and implement production packaging material specifications. Maintain awareness of technical trends and developments in the packaging industry. Understand and ensure packaging meets UN, DOT and regulatory requirements.
REQUIREMENTS:
Bachelors in Packaging Engineering or related field Minimum of 5 years of packaging development and project management experience preferably within CPG industry working with cross-functional teams Experience with packaging materials capabilities and equipment along with physical and structure package testing procedures Good verbal and written communication skills required. Must have the ability effectively communicate with cross-functional business partners. Ability to progress multiple projects concurrently. SAP preferred but not required.
From big benefits to small, we take care of our associates! After 30 days of employment, you will be eligible for a benefits package that includes medical, dental, life, disability and business travel insurance, flexible spending accounts, EAP, stock purchases and generous PTO. We also offer a 401(k) plan after three months of employment. Associates are vested in the RPM Pension plan after completing five years of service. Rust-Oleum offers 9 paid holidays and two floating holiday per year. You are also eligible to earn three weeks of vacation on an annualized basis. Rust-Oleum is an equal opportunity employer. Employment selection and related decisions are made without regard to sex, race, age, disability, religion, national origin, color, or any other protected class.Apply for this ad Online!....Read more...
Field Based Electrical Maintenance Engineer – Covering the East Midlands
We are looking to add a Field Based Electrical Maintenance Engineer to our existing Engineering team. The role will be primarily to maintain the electrical equipment inside our high street stores, but there will also be the occasion when you will be required to support our manufacturing plant and work alongside the engineering team based in Derby.
Duties:
Your day will start by collecting the van from the Main Plant based in Derby. The van will have all the tools that you need to carry out your role. The main plant will also hold all the parts you will need to carry out the maintenance and repairs when you are on site out in the field. You will be required to attend about 3 sites per day depending on the amount of maintenance required at each site, and all of the sites that are scheduled for maintenance and repairs will be local to each other. The role will be varied, including fixing and maintaining the commercial machinery on site that is used to manufacture the food products such as the ovens that are used in the manufacturing process. Refrigeration experience is also a bonus.
Package on offer:
Salary: To £40,000
Holidays: 28 days increasing each year to a max of to 33 days
Pension: Company Pension Offered
Staff Perks: 30% Discount on all food products
Hours: Monday to Friday 6,00am to 3.30pm on a normal basis, but this could vary on busy periods, so sometimes the start and finish time will be adjusted
Train and progression opportunities
Use of a company van that will be collected from the main site daily
Duties:
Travel throughout the East Midlands to c3 sites per day to carry out routine PPM tasks to our range of production equipment.
Conduct routine maintenance and repairs on site at our venues.
Inspect and troubleshoot issues reported by Managers.
Ensure sites are well-maintained and comply with safety standards.
Collaborate with Site Managers and contractors to coordinate repairs and upgrades.
Maintain an organised inventory of tools, equipment and supplies.
Provide exceptional customer service to all colleagues.
Requirements:
City & Guilds Electrical Qualification 17th Edition or 18th Edition electrical wiring regulations
Previous experience in repair and maintenance of equipment.
Strong problem-solving and trouble-shooting abilities.
Excellent attention to detail and time management skills.
Ability to work independently and as part of a team.
Good communication skills to interact with customers and colleagues.
Availability to work flexible hours
Valid clean driver’s licence and be happy to travel to our sites on a daily basis.
How to apply:
Please submit your cv through the link below, and we will call you asap for a chat about your experience, the company and your availability to attend an interview.....Read more...
My clients in North Bucks have an immediate requirement for a Head of Quality - Electronics.This role is commutable from Milton Keynes, Newport Pagnell, St. Neots, Biggleswade, Sandy, Bedford.My clients are a world leader in in the design, manufacture and continuous improvement of wireless condition monitoring solutions. Their technology is used in 35 countries in rail, construction and mining. More than 30,000 sensors were installed last year, helping users manage ground and structural movement, landslide risk, geotechnical behaviour, rail track movement and much more.Main Duties & Responsibilities:You will take a lead role in managing the Company’s Quality Management System to ensure that customers receive product to the highest standard of quality possible. You will be involved in facilitating successful new product introduction through the manufacturing facility. The role also requires driving continuous improvement throughout the organisation ensuring that problems are prevented, whilst always ensuring a customer focus throughout the organisation, and ensuring product is correctly released to necessary standards.This role reports to the Head of Operations and has the following direct reports: Senior Quality Engineer, Junior NPI Engineer and Quality Engineer (including HSE).There may be minimal requirement for national and international travel, primarily to undertake supplier audits, evaluation and NCR Fault/Fact Finding.Responsibilities include, although are not limited to the following:Provide leadership to the quality department and team. Manage, develop, and motivate an effective Quality team.• Manage all aspects of Organisation's Quality.• Own and lead the business ECN (Engineering Change Note) Process.• Work with Production, Supply Chain, Customer Support, Logistics to integrate Quality objectives into business objectives.• Lead coordination with engineering, product management and operations to implement manufacturing plan for products.• Own process to monitor status of all new products and ensure effective execution of projects according to required policies, procedures and government regulations.• Prepare plans for all NPI projects and coordinate with internal and external stakeholders.• Maintain a strong relationship with Product Management to understand business product roadmap and status.• Develop Quality Improvement strategies for the Organisation.• Monitor Business Cost of Poor Quality (COPQ), customer complaints, and other Quality indicators and drive projects to eliminate recurring issues as well as address special events in order to drive an overall improvement.• Implement effective process and product control strategies such as PFMEA, control plans, Measurement Systems Analysis, Statistical Process Control, Production Part Approval Process, Layered Process Audits and Finished Goods audits where necessary.• Ensure the auditing system is fit for purpose across the Quality Management System. Perform Internal ISO and Supplier Quality audits as necessary to ensure compliance with processes, policies, and expectations.• Lead and train others to develop effective corrective and preventive actions using 8D and Mistake Proofing concepts in response to customer concerns, COPQ data or regular product audit results.• Drive Quality consistency of procedures across all sites/hubs (UK, USA, Mainland Europe).• Assist/help maintain all HSE facility related compliance.• Lead, participate and facilitate various continuous improvement events and projects to support company goals and objectives. Partake and contribute to cultural change utilising appropriate continuous improvement tools and methodologies (Six Sigma, Mistake Proofing, Kaizen, etc).• Utilise strong interpersonal skills to communicate and engage support for driving COPQ improvement across various functions and levels within the Organisation.• Ensure that all process required for the Quality Management System are established, implemented and maintained.• Chairing and organising Management Reviews with the use of established KPIs to ensure the continuing suitability and effectiveness of the Quality Management System and to assess any improvement opportunities for the Quality Department.• Promote the awareness of customer requirements throughout the organisation and develop effective customer relations.• Maintain and assist in developing systems required for Environmental Regulatory compliance.Relevant Skills & Competencies:Successful candidates should be able to demonstrate the following relevant skills and competencies:• Continuous Improvement Skills such as PFMEA, FMEA, SPC, 8D.• Strong analytical and problem solving skills.• Demonstrable organisational, planning and program management skills with careful attention to detail.• Ability to build trusting relationships and communicate effectively at all levels.• Ability to manage multiple projects and changing priorities while working effectively in a team.• Driven, with a focus on continuous improvement and ability to shine a light on problems and facilitate teams on taking appropriate action.• Ability to communicate ideas with clear understanding of audience and gain commitments that are critical to the success of the organisation.• Excellent interpersonal, verbal and written communication skills.• Strong leadership and mentoring skills.• Good computer skills with competency in using MS Office suite and other software as necessary.• Greenbelt, Blackbelt and/or Lean Expert Certification preferred.Relevant Knowledge & Experience:Candidates should assess their suitability against the following essential and/or desirable relevant knowledge and experience:Essential:• Demonstrable knowledge and experience in an Electronic Engineering Environment AS9100, ISO 9000, ISO 9001, ISO 13485, TS16949, ISO14001 previous Quality Management experience, (Automotive & Military Customers, Supplier Management), plus having completed successful improvement projects.• Experience working in Electronic Manufacturing Environments.• Degree educated (preferably in Electrical or Mechanical Engineering) or equivalent experience in lieu.• Strong influencing skills at a senior stakeholder.Desirable:• Demonstrable experience at leading an implementation of QM change• Black Belt accredited to Lean Six Sigma• Experience of leading an improvement project in customer qualityPackage:Salary to c£65k, negotiable for a candidate with extremely well matched skills & experience.Workplace Pension Scheme with matched employer contributions.Life Assurance scheme.Cycle to Work Scheme.Tech Purchase Scheme.Learning & Development scheme including a variety of training courses.To apply for this Head of Quality - Electronics role in North Bucks please contact us ASAP!....Read more...
My clients in North Bucks have an immediate requirement for a Head of Quality - Electronics.This role is commutable from Milton Keynes, Newport Pagnell, St. Neots, Biggleswade, Sandy, Bedford.My clients are a world leader in in the design, manufacture and continuous improvement of wireless condition monitoring solutions. Their technology is used in 35 countries in rail, construction and mining. More than 30,000 sensors were installed last year, helping users manage ground and structural movement, landslide risk, geotechnical behaviour, rail track movement and much more.Main Duties & Responsibilities:You will take a lead role in managing the Company’s Quality Management System to ensure that customers receive product to the highest standard of quality possible. You will be involved in facilitating successful new product introduction through the manufacturing facility. The role also requires driving continuous improvement throughout the organisation ensuring that problems are prevented, whilst always ensuring a customer focus throughout the organisation, and ensuring product is correctly released to necessary standards.This role reports to the Head of Operations and has the following direct reports: Senior Quality Engineer, Junior NPI Engineer and Quality Engineer (including HSE).There may be minimal requirement for national and international travel, primarily to undertake supplier audits, evaluation and NCR Fault/Fact Finding.Responsibilities include, although are not limited to the following:Provide leadership to the quality department and team. Manage, develop, and motivate an effective Quality team.• Manage all aspects of Organisation's Quality.• Own and lead the business ECN (Engineering Change Note) Process.• Work with Production, Supply Chain, Customer Support, Logistics to integrate Quality objectives into business objectives.• Lead coordination with engineering, product management and operations to implement manufacturing plan for products.• Own process to monitor status of all new products and ensure effective execution of projects according to required policies, procedures and government regulations.• Prepare plans for all NPI projects and coordinate with internal and external stakeholders.• Maintain a strong relationship with Product Management to understand business product roadmap and status.• Develop Quality Improvement strategies for the Organisation.• Monitor Business Cost of Poor Quality (COPQ), customer complaints, and other Quality indicators and drive projects to eliminate recurring issues as well as address special events in order to drive an overall improvement.• Implement effective process and product control strategies such as PFMEA, control plans, Measurement Systems Analysis, Statistical Process Control, Production Part Approval Process, Layered Process Audits and Finished Goods audits where necessary.• Ensure the auditing system is fit for purpose across the Quality Management System. Perform Internal ISO and Supplier Quality audits as necessary to ensure compliance with processes, policies, and expectations.• Lead and train others to develop effective corrective and preventive actions using 8D and Mistake Proofing concepts in response to customer concerns, COPQ data or regular product audit results.• Drive Quality consistency of procedures across all sites/hubs (UK, USA, Mainland Europe).• Assist/help maintain all HSE facility related compliance.• Lead, participate and facilitate various continuous improvement events and projects to support company goals and objectives. Partake and contribute to cultural change utilising appropriate continuous improvement tools and methodologies (Six Sigma, Mistake Proofing, Kaizen, etc).• Utilise strong interpersonal skills to communicate and engage support for driving COPQ improvement across various functions and levels within the Organisation.• Ensure that all process required for the Quality Management System are established, implemented and maintained.• Chairing and organising Management Reviews with the use of established KPIs to ensure the continuing suitability and effectiveness of the Quality Management System and to assess any improvement opportunities for the Quality Department.• Promote the awareness of customer requirements throughout the organisation and develop effective customer relations.• Maintain and assist in developing systems required for Environmental Regulatory compliance.Relevant Skills & Competencies:Successful candidates should be able to demonstrate the following relevant skills and competencies:• Continuous Improvement Skills such as PFMEA, FMEA, SPC, 8D.• Strong analytical and problem solving skills.• Demonstrable organisational, planning and program management skills with careful attention to detail.• Ability to build trusting relationships and communicate effectively at all levels.• Ability to manage multiple projects and changing priorities while working effectively in a team.• Driven, with a focus on continuous improvement and ability to shine a light on problems and facilitate teams on taking appropriate action.• Ability to communicate ideas with clear understanding of audience and gain commitments that are critical to the success of the organisation.• Excellent interpersonal, verbal and written communication skills.• Strong leadership and mentoring skills.• Good computer skills with competency in using MS Office suite and other software as necessary.• Greenbelt, Blackbelt and/or Lean Expert Certification preferred.Relevant Knowledge & Experience:Candidates should assess their suitability against the following essential and/or desirable relevant knowledge and experience:Essential:• Demonstrable knowledge and experience in an Electronic Engineering Environment AS9100, ISO 9000, ISO 9001, ISO 13485, TS16949, ISO14001 previous Quality Management experience, (Automotive & Military Customers, Supplier Management), plus having completed successful improvement projects.• Experience working in Electronic Manufacturing Environments.• Degree educated (preferably in Electrical or Mechanical Engineering) or equivalent experience in lieu.• Strong influencing skills at a senior stakeholder.Desirable:• Demonstrable experience at leading an implementation of QM change• Black Belt accredited to Lean Six Sigma• Experience of leading an improvement project in customer qualityPackage:Salary to c£65k, negotiable for a candidate with extremely well matched skills & experience.Workplace Pension Scheme with matched employer contributions.Life Assurance scheme.Cycle to Work Scheme.Tech Purchase Scheme.Learning & Development scheme including a variety of training courses.To apply for this Head of Quality - Electronics role in North Bucks please contact us ASAP!....Read more...
Multi Skilled Engineer Warrington, Cheshire £49,9262 Days, 2 Nights 4 Off 18 days off every 5 weeks We are working exclusively with G&J Distillers part of the Quintessential Brands Group which is an independent international spirits business, with an exciting and diverse portfolio of premium brands and world-class production capabilities in the UK, Ireland and France. With a global reach, and brand building capabilities, it distributes and supplies customers around the world. Multi Skilled EngineerKey Responsibilities:
Fix / Maintain - carry out reactive and PPM tasks as required to support the operational requirements of the business.Carry out ad hoc (sometimes operational) tasks to support the operation.Colleagues, maintenance manager & shift managers to be fully informed by use of relevant reporting systems.Will be able to follow a designated task schedule and if required manage / organise own workload.To complete tasks on time in full to an acceptable standard.The job holder will be expected to work unsupervised and as part of a team.Always operate in a safe manner using Dynamic Risk Assessment principals Carry out repairs to all types of plant and equipment in a safe, timely and professional manner.Assist in the development of planned preventative maintenance schedules (PPM).Carry out PPM schedules as necessary and planned work orders as required.Operate maintenance Fork Lift Truck and Elevated Working Platform as required.Assist visiting specialist engineers when necessary.Report breakdown root cause, equipment faults and concerns to Maintenance ManagerMake full use of the Computerized Maintenance Management System (CMMS).Plan / prioritize workload to support production and ensure efficient use of working time.Raise and complete work requests using CMMS as required.Manufacture spare parts as required (Simple Bracketry Gaskets etc…) using lathes, milling machines, welding equipment, etc.Identify spares requirements and control / log usage.
Multi Skilled EngineerThe Person:Multi skilled, qualified to minimum engineering standard – NVQ Lvl 4, HNC, recognised apprenticeship (FADA)Quantifiable experience with electrical control, PLC & automation systemsHave strong problem-solving skills, operational understanding of OEE,5S, Lean manufacturing techniques TPM and PPM in a manufacturing environment.To perform specified tasks and work under own initiativeTo perform additional tasks as requested by the Engineering manager.To constantly challenge and improve standards.Willingness to take on ad hoc tasks in any / all areasTo maintain a high degree of both product and personal safety in accordance with HSE, EHO & HMRC requirements, ensuring adherence to all legislative requirements.
Please contact (Ryan Taylor on 0161 746 3311 at Winsearch for more information)Winsearch acts as an employment agency for permanent staff. We recruit for roles based in Engineering & Manufacturing, Food & Drinks, Pharmaceutical, Supply Chain & Procurement and Professional Services.View our latest jobs today on our website http://www.winsearch.uk and follow us on LinkedIn.FoodH Our clients and their customers come from diverse backgrounds and so do we. We hire our people from various walks of life, each of whom make our company stronger with their talent, uniqueness, and expertise. This is what makes our company special; if you want to help us grow and take this ethos to our clients, then we cannot wait to collaborate with you!
The UK has now left the European Union. Any EU, EEA or Swiss citizens living in the UK that wish to remain in the UK post Brexit need to apply to the EU Settlement Scheme. Although the closing date for applications was 30th Jun 2021, if you have not yet applied but believe that you would qualify under the EU Settlement Scheme, the Home Office have confirmed that they will consider late applications. For further information please see https://www.gov.uk/browse/visas-immigration/eu-eea-swiss
Many Thanks....Read more...
Multi Skilled Engineer Warrington, Cheshire £44,85606:00 – 14:00 / 14:00 -22:00 Rotation We are working exclusively with G&J Distillers part of the Quintessential Brands Group which is an independent international spirits business, with an exciting and diverse portfolio of premium brands and world-class production capabilities in the UK, Ireland, and France. With a global reach, and brand building capabilities, it distributes and supplies customers around the world. Multi Skilled Engineer Key Responsibilities:
Fix / Maintain - carry out reactive and PPM tasks as required to support the operational requirements of the business.Carry out ad hoc (sometimes operational) tasks to support the operation.Colleagues, maintenance manager & shift managers to be fully informed by use of relevant reporting systems.Will be able to follow a designated task schedule and if required manage / organise own workload.To complete tasks on time in full to an acceptable standard.The job holder will be expected to work unsupervised and as part of a team.Always operate in a safe manner using Dynamic Risk Assessment principals Carry out repairs to all types of plant and equipment in a safe, timely and professional manner.Assist in the development of planned preventative maintenance schedules (PPM).Carry out PPM schedules as necessary and planned work orders as required.Operate maintenance Forklift Truck and Elevated Working Platform as required.Assist visiting specialist engineers when necessary.Report breakdown root cause, equipment faults and concerns to Maintenance ManagerMake full use of the Computerized Maintenance Management System (CMMS).Plan / prioritize workload to support production and ensure efficient use of working time.Raise and complete work requests using CMMS as required.Manufacture spare parts as required (Simple Bracketry Gaskets etc…) using lathes, milling machines, welding equipment, etc.Identify spares requirements and control / log usage.
Multi Skilled EngineerThe Person:Multi skilled, qualified to minimum engineering standard – NVQ Lvl 4, HNC, recognised apprenticeship (FADA)Quantifiable experience with electrical control, PLC & automation systemsHave strong problem-solving skills, operational understanding of OEE,5S, Lean manufacturing techniques TPM and PPM in a manufacturing environment.To perform specified tasks and work under own initiativeTo perform additional tasks as requested by the Engineering manager.To constantly challenge and improve standards.Willingness to take on ad hoc tasks in any / all areas.To maintain a high degree of both product and personal safety in accordance with HSE, EHO & HMRC requirements, ensuring adherence to all legislative requirements.
Please contact (Tre James on 0161 746 3329 at Winsearch for more information)Winsearch acts as an employment agency for permanent staff. We recruit for roles based in Engineering & Manufacturing, Food & Drinks, Pharmaceutical, Supply Chain & Procurement and Professional Services.View our latest jobs today on our website http://www.winsearch.uk and follow us on LinkedIn. FoodH Our clients and their customers come from diverse backgrounds and so do we. We hire our people from various walks of life, each of whom make our company stronger with their talent, uniqueness, and expertise. This is what makes our company special; if you want to help us grow and take this ethos to our clients, then we cannot wait to collaborate with you!
The UK has now left the European Union. Any EU, EEA or Swiss citizens living in the UK that wish to remain in the UK post Brexit need to apply to the EU Settlement Scheme. Although the closing date for applications was 30th Jun 2021, if you have not yet applied but believe that you would qualify under the EU Settlement Scheme, the Home Office have confirmed that they will consider late applications. For further information please see https://www.gov.uk/browse/visas-immigration/eu-eea-swiss
Many Thanks....Read more...
Overview
Ref: 102930
Software Engineer / C++ / AI
Fantastic opportunity to play a pivotal role in integrating AI algorithms into edge and cloud hardware platforms. This will include designing, developing, and optimizing AI models for real-time analysis and understanding tasks.
Role Responsibilities
Responsibilities will include:
Developing and optimizing AI models
Collaborate with cross-functional teams to integrate AI algorithms
Implement and maintain code in C++ and Python.
Utilise OpenVINO and OpenCV for AI model deployment and optimisation.
Stay up to date with the latest advancements in AI and computer vision.
Person Specification
You will have the following skills:
Strong proficiency in AI and deep learning techniques
Proficiency in C++ and Python programming
Familiarity with OpenVINO and OpenCV for AI model deployment and optimization.
If you are passionate about the production of high-quality, re-usable code and have the ability to suggest, discuss and develop potential solutions to a variety problems then this is definitely something to consider.
Reward
In return our client will reward you with an excellent salary & benefits as well as the opportunity to progress your career and work with some cool tech.
Next Steps
Apply by contacting Ciaran Ahern, 0131 270 6608 or cahern@fpsg.com
Equal Opportunities
FPSG is committed to equal opportunities regardless of gender, race, disability, sexual orientation, religion or belief and age.
We are Disability Confident and neurodiverse aware. If you have a disability, please tell us if there are any reasonable adjustments we can make to assist you in your application or with your recruitment process....Read more...
We are looking for a Senior Data Engineer to join our client's Data Analytics & AI Team, where you will play a key role in constructing and automating the infrastructure of our data and AI platform and developing functional data components. Working in collaboration with our business unit platform teams, you'll be responsible for designing, building, and managing the infrastructure and tools that enable efficient processing and analysis of large data sets to support successful running of AI projects.
Requirements:
Bachelor’s or Master’s degree in Computer Science, Data Science, or a related field.
Advanced Python knowledge for data processing and scripting.
Hands-on experience with one or more cloud services (Azure, AWS, GCP).
Proficiency in SQL and NoSQL databases.
Experience with Data as Code; version control, small and regular commits, unit tests, CI/CD, packaging, familiarity with containerization tools such as Docker and Kubernetes.
Experience with Infrastructure as Code is a plus.
Strong problem-solving skills and attention to detail.
Good communication skills, fluent English.
Responsibilities:
Develop and maintain scalable data pipelines.
Create efficient Extract, Transform, Load (ETL) processes to handle data transformation and preparation.
Ensure data accuracy and integrity across various sources.
Work with data warehousing technologies to organize and store large volumes of data.
Optimize data storage and retrieval for analytical and operational purposes.
Collaborate with data scientists to deploy machine learning models (incl. LLMs) into production environments. Leverage tools like Kubeflow, MLflow to streamline the end-to-end ML lifecycle.
Ensure seamless integration of ML models with data pipelines.
Collaborate with business teams to enhance data models that feed business intelligence tools.
Foster data-driven decision-making by making data accessible to relevant stakeholders.
Implement software and methodologies for data correction, reconciliation, and quality checking.
Maintain data consistency across different data sources.
If interested, please get in touch via contact details provided or click “Apply” to forward an up-to-date copy of your CV.
Cavendish (Recruitment) Professionals Ltd are proud to be an equal opportunity employer and we believe that inclusivity begins with the candidate experience. All qualified applicants will receive consideration for employment regardless of, gender, race, age, sexual orientation, religion, or belief.....Read more...
FPGA EngineerInsignis Talent are currently working with a multi-national Maritime Defence company, who’s broad portfolio of capabilities is operational on UK naval fleets and allied navies worldwide. They specialise in the design, development and production of the key elements of mission critical, intelligent and highly regulated solutions across surface, sub-surface and unmanned platforms.They are currently seeking multiple FPGA Engineers, at a range of levels of experience, to join their team on a permanent basis. At their site in Staffordshire, you will place a key role in the development of expert solutions that help shape the future of naval warfare.Responsibilities will be tailored to match your expertise and experience level. Generally, you'll oversee various FPGA tasks spanning the entire development cycle, from gathering requirements to implementing, verifying, and validating programmed devices.Key duties include:
Handling FPGA Implementation, from requirements gathering to RTL coding and physical stages
Defining the conceptual structure and architecture of FPGA designs
Creating and executing testbench code and conducting IV&V activities
Ensuring compliance with safety standards and processes, and contributing to their development and upkeep
Utilizing Model-Based design techniques with Matlab/Simulink for modeling and simulation
Managing requirements, configuration control, incident reporting, and project documentation
Providing lab support during hardware development phases
Facilitating inter-team and intra-team communications, including reviewing processes
Experience requirements vary with seniority level and may encompass:
A degree or higher in electrical/electronic engineering or equivalent
Demonstrated experience in FPGA/ASIC design
Proficiency in VHDL with practical involvement in successful projects
Familiarity with model-based design tools like Matlab/Simulink is advantageous
Ability to adhere to formal FPGA/ASIC design processes
Wide-ranging knowledge of digital electronics and other engineering domains (e.g., systems, analog/power electronics, mechanical, motors, etc.)
Familiarity with best practices in design lifecycle processes, including gated design phases and design reviews
Strong presentation skills and comfort interfacing with customers
Important information: The selected candidate must obtain the necessary security vetting level for the role.If you believe you possess the qualifications for this position and would like to learn more, please apply!....Read more...
JOB DESCRIPTION
I&C engineer and supported by I&C technician team. Responsible for the design and review of all I&C equipment and instruments for the Plant. Explore solutions to production problems or improve efficiency with maintenance and operators. Run experiments and tests to aid in the development of improved manufacturing procedures and processes, and become familiar with a variety of concepts, practices, and procedures. Work and coordinate activities with the other engineering disciplines, Process, Project and Environmental. Prepare, review and/or approve of instrument specification data sheets and submit purchase requisitions for approval. Prepare equipment lists, instrument index, I/O lists. Review process flow diagrams and piping and instrument diagrams (P&IDs). Meet with plant technical staff to discuss technical information and features. Ensure drawings, specifications, reports, and analyses meet scope, schedule, cost, and quality requirements. Participate in failure mode and effect analysis (FMEA) and Process Hazard analysis (PHA) to consider equipment, personnel, and environmental safety. Knowledge of capital approval process and project justification required. Be involved in the design and development of equipment and work procedures. Be responsible for preparing, maintaining, and updating process hazard analysis. Ensures necessary records are maintained and prepared according to established guidelines. Takes responsibility for I&C Engineering Change Management system. Coordinate and approve all sample submissions of new products and engineering changes through the Product Development Program. Assists in identifying the root causes of a problem and instituting corrective action such as changes to batch sheets, generation of Engineering Change Requests, changes in workstations, changes to inspection analyses and changes to process procedures. Provide recommendations to improve procedures that apply to quality and operations functions. Be responsible for the design and implementation of policies and procedures to ensure that quality standards are met during production. Review quality trends based on quality data system information and interaction with production personnel and participate in the generation and implementation of defect-reduction programs. Investigate quality improvement opportunities and complaints with Director, Plant Manager and Research and Development. Prepare for and represent the company during all ISO and related audits. Review all design drawings and changes, process procedures, test procedures, procurement documents, and inspection analyses to ensure that the divisions and customers quality requirements are met on assigned products, programs, areas, and functions. Provide support to maintenance and operation group including visual aids and inspection analyses.
EDUCATION AND/OR EXPERIENCE:
B.S. degree in Electrical or Computer Engineering. Preferred, 2+ years working in a Manufacturing environment, and/or training; or equivalent combination of education and experience. Electrical Schematic and panel layout design using CAD (preferably AutoCAD Electrical) experience. Experience in the design of programmable logic controllers (PLC) or distributed control system (DCS) based controls systems. Expertise in National Electrical Code requirements in industrial facilities and hazardous locations. Proven understanding of integrating instrumentation with data acquisition hardware. Proficiency with electrical diagnostic equipment. Familiar with industrial sensors and actuators; pressure, temperature, accelerometers, motor controllers, flow meters, relays, strain gauges, valves, and pumps. Strong technical and non-technical writing and verbal skills Able to work in the United States without sponsorship. Ability to read, analyze, and interpret complex documents and/or scientific and technical journals, financial reports, and legal documents. Ability to respond to common inquiries or complaints from customers, regulatory agencies, or members of the business community.
PHYSICAL DEMANDS
This job requires daily use of hands to finger, handle or feel, and daily talking and/or hearing. This job requires frequent walking, standing, sitting, reaching with hands and arms, and stooping, kneeling, crouching, or crawling. This job requires occasional climbing or balancing and tasking or smelling. This job requires frequent lifting of up to 10 lbs. This job has the following special vision requirements: Close vision (clear vision at 20 inches or less) Distance vision (clear vision at 20 feet or more) Color vision (ability to identify and distinguish colors) Peripheral vision (ability to observe an area that can be seen up and down or to the left and right while eyes are fixed on a given point) Depth perception (three-dimensional vision, ability to judge distances and spatial relationships)
WORK ENVIRONMENT
This job requires exposure to the following environmental conditions: Daily exposure to fumes or airborne particles and toxic or caustic chemicals. Frequent exposure to working near moving mechanical parts. Occasional exposure to wet or humid conditions, working in high, precarious places, outdoor weather conditions, and risk of electrical shock. The noise level for this job is loud. This job is located at a Chemical Plant. Evaluate hazardous processes and chemicals such as caustic, ammonia, and solvent. Evaluating storage tank instrumentation (high places), Assisting maintenance in troubleshooting, replacing, cleaning, and redesigning equipment
Wages: From $88K to $120K per year.
This position is 15% bonus eligible.
Benefits, upon satisfaction of applicable eligibility requirements, include but are not limited to: medical, dental, vision, life insurance, disability, vacation, 14 Paid Holidays, parental leave, 100% Education reimbursement, 401(k), employee stock purchase plan, and pension. Apply for this ad Online!....Read more...
JOB DESCRIPTION
Tremco Construction Products Group brings together Tremco CPG Inc.'s Commercial Sealants & Waterproofing and Roofing & Building Maintenance divisions; Tremco Barrier Solutions Inc.; Dryvit, Nudura and Willseal brands; Prebuck LLC; Weatherproofing Technologies, Inc.; Weatherproofing Technologies Canada and PureAir Control Services, Inc. Altogether, Tremco CPG companies operate 21 manufacturing facilities, 6 distribution sites, and 3 R&D/technology sites, and employ more than 2,700 people across North America.
GENERAL PURPOSE OF THE JOB: The Chemical Process Engineer is responsible for ensuring safety, maintaining product quality, and enhancing process efficiency in a chemical production environment. Additionally, this role emphasizes promoting a LEAN culture and requires active involvement in on-floor operations as well as spearheading significant projects related to process equipment.
ESSENTIAL DUTIES AND RESPONSIBILITIES:
Lead in safety management, resolving complex issues in collaboration with shift supervisors. Conduct and oversee scheduled Process Hazard Analyses (PHA) and Job Safety Analyses (JSA). Monitor and address potential safety concerns proactively. Utilize DAKOTA software for advanced compliance, incident reporting, and safety management. Develop and implement \"standard work\" practices to enhance LEAN culture. Manage activities on Engineering Tier and accountability boards, and conduct daily GEMBA Walks for education and communication. Focus on productivity improvement by eliminating non-value-added activities using engineering principles. Maximize equipment efficiency for optimal product quality, and train operators on quality specifications. Participate actively as a member of the facility's Quality Improvement Council (QIC), focusing on root cause analysis. Successfully manage significant process projects, ensuring they are completed on time and within budget. Mentor less experienced peers, providing guidance and expertise.
EDUCATION REQUIREMENT: 4-year degree in engineering.
EXPERIENCE REQUIREMENT: 4+ years of experience.
OTHER SKILLS, ABILITIES, AND QUALIFICATIONS:
PHYSICAL DEMANDS: The incumbent must be able to stand, walk, sit, use hands, reach, climb, balance, kneel, talk, hear, taste, smell, and lift up to 25 lbs.
BENEFITS AND COMPENSATION:
Tremco offers a variety of benefits to its employees, including but not limited to health insurance, paid holidays, paid time off, 401(k) with company match, Company Pension Plan, Performance Based Bonus/Commission, and continuing education.
All qualified applicants will receive consideration for employment without regard to their race, color, religion, sex, sexual orientation, gender identity, national origin, disability or veteran status.Apply for this ad Online!....Read more...
JOB DESCRIPTION
Tremco Construction Products Group brings together Tremco CPG Inc.'s Commercial Sealants & Waterproofing and Roofing & Building Maintenance divisions; Tremco Barrier Solutions Inc.; Dryvit, Nudura and Willseal brands; Prebuck LLC; Weatherproofing Technologies, Inc.; Weatherproofing Technologies Canada and PureAir Control Services, Inc. Altogether, Tremco CPG companies operate 21 manufacturing facilities, 6 distribution sites, and 3 R&D/technology sites, and employ more than 2,700 people across North America.
GENERAL PURPOSE OF THE JOB: The Chemical Process Engineer is responsible for ensuring safety, maintaining product quality, and enhancing process efficiency in a chemical production environment. Additionally, this role emphasizes promoting a LEAN culture and requires active involvement in on-floor operations as well as spearheading significant projects related to process equipment.
ESSENTIAL DUTIES AND RESPONSIBILITIES:
Strategize and innovate safety management, resolving high-level issues in collaboration with shift supervisors.
Lead comprehensive Process Hazard Analyses (PHA) and Job Safety Analyses (JSA).
Identify, analyze, and spearhead initiatives to mitigate complex safety concerns.
Expertly manage DAKOTA software for comprehensive compliance, incident reporting, and safety management.
Champion the development and implementation of \"standard work\" practices, leading the LEAN culture.
Oversee Engineering Tier activities and accountability boards, and lead daily GEMBA Walks for advanced education and communication.
Drive productivity improvement by strategically eliminating non-value-added activities using advanced engineering principles.
Ensure equipment efficiency at the highest levels, participate in the facility Quality Improvement Council (QIC), and provide expert quality training to operators.
Lead and ensure the successful completion of high-impact process equipment projects.
Act as a key member of the facility's Quality Improvement Council (QIC), leading initiatives to identify root causes and prevent future customer complaints.
Manage large-scale projects with substantial budgets.
Serve as a senior mentor to less experienced engineers, guiding them in complex projects and career development.
EDUCATION REQUIREMENT: 4-year degree in engineering.
EXPERIENCE REQUIREMENT: 7+ years of experience.
OTHER SKILLS, ABILITIES, AND QUALIFICATIONS:
PHYSICAL DEMANDS: Incumbent must be able to stand, walk, sit, use hands, reach, climb, balance, kneel, talk, hear, taste, smell, and lift up to 25 lbs.
BENEFITS AND COMPENSATION:
Tremco offers a variety of benefits to its employees, including but not limited to health insurance, paid holidays, paid time off, 401(k) with company match, Company Pension Plan, Performance Based Bonus/Commission, and continuing education.
All qualified applicants will receive consideration for employment without regard to their race, color, religion, sex, sexual orientation, gender identity, national origin, disability or veteran status.Apply for this ad Online!....Read more...
Holt Executive are partnered with a leading design and manufacturing business who are seeking a Sales & Marketing Executive to join their Sales & Marketing team.
This is a 14-month fixed-term contract to cover maternity leave.
The Sales & Marketing Executive will spearhead the development and execution of brand marketing strategies across online and print channels. They will create compelling content that aligns with the company's core values and market leadership position, driving the achievement of strategic goals.
Key Responsibilities for the Sales & Marketing Executive:
- Spearhead the marketing team in developing and executing a game-changing marketing strategy.
- Develop and implement a comprehensive external communications strategy aligned with overall business objectives.
- Working closely with the PR agency to manage media relations, including writing press releases, and responding to media enquiries.
- Strategic marcomms planning at both corporate and sector levels.
- Collaborate with sales and marketing teams to develop media campaigns that directly align with company strategy.
- Approve and oversee the production of all marketing materials, including website content, brochures, adverts, and social media posts.
- Oversee and manage the social media presence, creating engaging content.
- Manage and oversee all internal sales collateral (data sheets, company presentations, posters and banners)
- Exhibition organisation and management (stand build, graphics, products, customer visits, admin etc). Ability to travel in support of exhibitions.
- Manage all aspects of event marketing and promotion, from website content to social media engagement, email marketing blasts, and post-event communication.
- Manage exhibition budget and ensure smooth event execution.
- Work with the Product Design Engineer to ensure all exhibition models are kept up to date.
- Regular interactions with Group marketing managers to receive information and updates about marketing staff progress and results.
- Work with the other Cohort subsidiaries as required, including joint communications, planning, and scheduling for joint activity.
Key Skills & Experience for the Sales & Marketing Executive:
- Marketing and communications experience with a learning mindset for new products.
- Advanced knowledge of Microsoft packages including Excel, Word, and PowerPoint.
- Proficient Adobe Suite (Adobe Illustrator, InDesign, and Photoshop).
- Ability to develop and deliver compelling presentations.
- Excellent business and marketing acumen.
- Ability to lead and develop a successful communications team.
- Experience creating and executing marketing campaigns across a variety of channels, including social media, email, and digital advertising.
Company Benefits:
- 37.5 hour working week and lunchtime finishes on a Friday.
- 28 days annual leave.
- Christmas closure.
- Hybrid/flexible working arrangements.
- Group pension plan matched contributions up to 5%.
- Employee Help@Hand Service gives you and your family access to 4 key services including remote GP service, second opinion, mental health pathway service, and physiotherapy consultations.
- Life Assurance Policy, including Bereavement Counselling and Probate Helpline.
- Company Share Incentive Plan and Save as You Earn Scheme.
- Wellbeing initiatives, including access to the Aviva Wellbeing App and the addition of mental health support for all employees plus regular activities across sites to support and promote well-being.
- Employee discounts scheme (including access to an additional wellbeing hub).
- Excellent Learning & Development opportunities.
If your skills and experience match this Sales & Marketing Executive opportunity, we encourage you to apply by sending your CV to info@holtexecutive.com....Read more...
GPW Job Ref: E113298
CNC Miller Setter / Operator (Fanuc) with experience of manufacturing components in Stainless Steel / Aluminium required ASAP for a Permanent role in Knutsford Area. Salary is £30,351 pa inclusive of 25% shift uplift (days salary, £24,281 pa) + Bens. The basic working week is approx. 40 hours/week (Mon - Fri 6am-2pm & Mon - Thur 2pm-11pm & Fri 2-6pm) plus occasional O/T.
Salary & Benefits:-
Salary £30,351 pa inclusive of 25% shift uplift (days salary, £24,281 pa)
HoW: Approx. 40 hours/week – Early shift Mon - Fri 6am-2pm & late shift & Mon - Thur 2pm-11pm & Fri 2-6pm
20 days holiday plus bank holidays – increasing 1 day/year to max of 25 days plus bank holidays
Enhanced Company Pension Plan
Life Assurance
Occasional O/T @ 1.5x
Yearly company bonus
Rest room with TV, drinks & snacks machine, fridges, microwaves and sandwich ordering service.
Job Purpose: To effectively produce components using the to the required quality and timescale and in accordance with the job specification/drawing and works order.
The successful CNC Miller Setter / Operator day to day duties will include:
Prioritise, in accordance with Team Leader’s instructions and work in progress requirements, works orders received from the Cutting Room
Ensure material received is to specification. Refer any inaccuracies to the Team Leader.
Identify and load the appropriate programme for the specific job, referring to the Pro-Engineer report. If no programme exists or a program error has occurred report to the Team Leader
Manufacture components to production deadlines ensuring the CNC / manual machines are operated safely and that the appropriate checks have been carried out
Ensure that the completed component is checked against the specification, is de-burred and engraved and blasted as required
Manufacture jigs and fixtures to aid the machining of components
Follow the machine maintenance schedule; respond appropriately and quickly to machine alarms.
Report any faults with the machine to the Team Leader
Carry out weekly 5S audits on area as requested by Team Leader
Deal professionally, competently and courteously with customers, suppliers and colleagues in problems and offer advice with verbal and written communications
To be suitable for this CNC Miller Setter / Operator role you must have the following experience / characteristics:
Must have previous experience of setting / operating Fanuc controlled CNC milling machines
Must have previous experience of using manual milling machine.
Ideally be a time served or completed relevant apprenticeship as a CNC / Manual machinist.
Must have undertaken formal training in CNC setting and operation.
Highly motivated and keen to succeed.
To be more suitable for this CNC Miller Setter / Operator role it would be more advantageous if you have the following skills / experience:
Ideally will have attended programming courses run by machine manufacturers.
Online programming experience.
Relevant qualifications in manual machining / CNC machining.
Previous experience of manufacturing stainless steel / aluminium parts.
Previous experience of using Hitachi Seiki HiCells C.N.C machines.
Key Words: C.N.C, 3-5 Axis, Miller, CNC, Milling, Machine Setter, C N C, Machine Operator, Computer Numerical Controls, C.N.C, Machinist, Machine Programmer, Turning, Lathe, Fanuc, Turner, Hitachi Seiki HiCells, Permanent, Full Time, Double Days shift, Warrington, Knutsford, Cheshire
The successful CNC Miller Setter / Operator will need to be flexible and be able to work overtime with little notice. Will have previous experience of working in a busy manufacturing environment, you will have a standard-level education, have the relevant qualifications or experience, be punctual, conscientious, keen and have a practical approach to work.
If you are interested in CNC Miller Setter / Operator role and have the required experience please click on the apply now button....Read more...
