We are seeking a skilled technician to work closely with the Senior Test Engineer at aircraft test facilities. You will work extensively with high-pressure gas and fluid systems.
Key Responsibilities
Proactively respond to any issues related to the engine or test site to ensure safety.
Assist in managing operations that involve hazardous materials.
Ensure that correct pressures are maintained in the feedlines during tests.
Assist lead Test Engineers with: site preparation and maintenance: conducting pressure and control system checks: instrument calibration and steam boiler operations.
Assisting with instrumentation, installation, and removal of flight engines before and after hot fire tests.
Required Skills and Competencies
Hands-on mechanical fitter or engineering skills, ideally gained within an engineering-focused organization.
A proactive attitude toward safety and operational support.....Read more...
This is a fantastic opportunity to kickstart your engineering career, one of the UK’s leading food manufacturers - gain hands-on experience in:
Mechanical
Electrical
Hydraulic systems while earning a wage and working towards a nationally recognised Mechatronics Maintenance Engineer qualification
Training Outcome:
To be confirmed
Employer Description:The company is a food manufacturing business based in Coventry that specialises in producing and supplying chilled ready meals to customers.Working Hours :Shifts to be confirmed.Skills: Communication skills,Attention to detail,Organisation skills,Team working....Read more...
Electrical & mechanical maintenance on production machinery
PLC basics, sensors, motors, and control systems
Preventive and reactive maintenance (TPM principles)
Fault diagnosis and continuous improvement techniques
Safe working practices in a food manufacturing environment
Training:Mechatronics Maintenance Technician Level 3.
1st Year - Full time at Gloucestershire Engineering Training
2nd to 4th year - Day release technical training at GET’s training centre
Practical workshop training in mechanical, electrical and multi-skilled engineering disciplines
On-site mentoring from experienced Maintenance Engineers, Team Leaders and GET assessors
Training Outcome:Upon successful completion, apprentices are often offered a full-time Maintenance Engineer or Maintenance Technician role, subject to performance.Employer Description:Schreiber Foods UK is a leading dairy manufacturer located in Stonehouse, Gloucestershire. We operate advanced food‑production facilities supplying major customers with high‑quality dairy products. Our team focuses on safety, innovation, and delivering consistent, reliable manufacturing performanceWorking Hours :Full-time, 40 hours per week.
Monday to Friday (typical shifts between 08:00–16:30, subject to operational needs) .
Occasional flexibility required to support production activities.Skills: Communication skills,Attention to detail,Problem solving skills,Analytical skills,Logical,Team working,Initiative,Strong Interest in engineerig....Read more...
Flexible working hours, company pension contributions of up to 8% and an annual leave entitlement of 25 days plus Bank Holidays are just a few of the perks that the Senior Design Engineer will enjoy whilst working for a Global Engineering and Manufacturing leader, with over 20 worldwide locations employing 1000 + staff. This employer is recognised globally for quality and innovative deliverables.The successful Senior Design Engineer will be easily able to commute to HUDDERSFIELD from surrounding towns & cities, including Leeds, Dewsbury, Halifax, Wakefield and Brighouse.Key Responsibilities of the Senior Design Engineer will include:
Develop new designs or re-engineer existing designs for new applications using AutoCAD 2D & 3D to an expert level, including Solid Edge.
Create detailed component and assembly drawings
Create and maintain accurate documentation including BOM’s, Proposals, Manuals and Maintenance instructions for designs.
Interpret customer specifications and design standards
Participate in Design/Process Failure Mode and Effect Analysis (DFMEA/PFMEA) activities
Reporting to the Technical Authority, Engineering Resource Manager and Engineering Director
For the Senior Design Engineer role, we are keen to receive CV’s from candidates who possess:
Experience as a Senior Design Engineer or similar within an Engineering environment
Demonstrable understanding of material selection,
Strong understanding of industry standards such as ISO, AGMA, DIN and FKM to name a few.
Bachelors Degree in Mechanical Engineering and or CEng
Experience using SAP MRP
Salary & Benefits:
£60,000 to £65,000 depending on experience
Flexible working hours
Monday to Friday
37.5 hours per week
25 Days annual leave + Bank holidays
Company pension contributions of up to 8%
Please be aware that many roles working for our client will be subject to both security and export control restrictions. These restrictions mean that factors including your nationality, any previous nationalities you have held, and your place of birth may limit those roles you can perform for the organisation.You must meet Right to Work in the UK criteria and achieve the required security and clearance requirements to undertake this role.To apply for the Senior Design Engineer role, please click “Apply Now” and attach an updated copy of your CV. Alternatively, please contact Alex Feather at E3 Recruitment for more information. ....Read more...
Multi Skilled Maintenance EngineerSalary circa basic £38,645.85 + 33% shift uplift (£51,410.96 total)Location: Bradford BD12 – must live within a commutable distanceContinental shiftsJob PurposeWe are seeking an electrically biased multi-skilled Engineer to oversee the Electrical and Mechanical maintenance of our plant at the Bradford site. This role entails ensuring compliance with Planned Preventative Maintenance (PPM) systems, offering reactive breakdown support, conducting site facility repairs, contributing to continuous improvement initiatives, and engaging in project work.Accountabilities
Execute all activities safely and professionally, adhering to legislative and company Health and Safety policies/procedures.Strive to attain departmental targets related to Health and Safety and aim for continuous improvement in accident reduction.Perform Planned Preventative Maintenance, Reactive repairs, and statutory checks on electrical and mechanical systems, working collaboratively within the Maintenance Team to minimize machinery downtime.Participate in Root Cause Analysis (RCA) with a cross-discipline team to identify and implement permanent solutions to faults.Engage in Continuous Improvement projects to enhance safety standards, quality, and machine availability.Undertake repairs on site facilities as necessary to maintain standards.Utilize the Computerized Maintenance Management Software (CMMS) to document work completed, and minimize fault occurrences.
Planning & Organising
To plan maintenance tasks and prioritising jobs and workload in conjunction with the Shift Controller
Internal & External Relationships
Will have daily contact with Shift Managers, Maintenance Engineers and contractors.
Knowledge (‘Need to know’)Essential
Proficiency in fault finding on various control systems such as Programmable Logic Controllers (PLCs), AC/DC motors, Drives/frequency inverters, and relay logicFamiliarity with pneumatic & hydraulic systems.Completion of a time-served electrical apprenticeship.
Desirable
Experience with Allen Bradley PLCs is desirable but not essential.
Skills (‘Need to be able to’)Essential
NVQ Level 3 qualification or equivalent.Analytical, logical, and methodical approach to problem-solving.Computer literacy.
Experience (‘Need to have had experience in’) Essential
Minimum of 3 years' experience in a production maintenance environment with a multi-skilled approach.
Interested in this Multi Skilled Maintenance Engineer role? If you feel that your skills and experience match the role criteria then please send your cv by return. INDHS Equals One is an advertising and recruitment agency working on behalf of our client to promote this vacancy. You may be contacted directly by the employer should they wish to progress your application. Due to the number of applications we receive, we are unable to provide specific feedback if your application is unsuccessful.....Read more...
We invite applicants to apply for a position to join our Mechanical Contracts Team within our Head Office in Croydon. To be part of a team involved in the Design, Construction and Management of Mechanical Building Services Installations within London. Qualified professionals are needed to ensure projects are completed on time and meet diverse demands. This industry impacts our daily lives in numerous ways, making it an exciting field to be a part of. The training at our head office and sites will develop technical engineering and management skills generally as below.
Engineering skills:
An understanding of Building services engineering installation methods & principles
Support & contribute to the production of Construction drawings and technical submissions
Review of mechanical specifications & schedules
Operate computer-based software packages, such as CAD, ASTA, Word, Excel, Revit
Building sustainability
Management skills:
Programming and managing installation works
Attending client meetings
Project cost control
Apply Health & Safety Policies
Quality control
Training:
The apprenticeship is split between training in the Head Office or within London at various sites (within Zone 1-6) and City of Westminster College (CWC)
As well as working at Mechanical Services Ltd, you will also study for a Level 3 Building Services Engineering Technician Apprenticeship
You will be given time during the week to study, and attendance at college and the timely completion of assignments are a compulsory part of your job role
Training Outcome:
Following completion of the apprenticeship, there will be an opportunity for progression to Project Engineer and Project Management positions with a high level of technical knowledge
Employer Description:Mechanical Services Limited is an Employee Owned small to medium sized business that has been running for over 40 years. MSL undertakes mechanical & electrical building services installations in various sectors of the construction industry.
MSL is a family run company of approximately 100 employees consisting of plumbers, electricians, site management, office admin and project management personnel.
The head office is based on the Purely Way in Croydon, with projects predominately based on construction sites in Central London.
MSL has an excellent track record of employing apprentices on building services engineering courses for over 30 years.Working Hours :The successful candidate would be primarily based/working out of our Head Office in Croydon working Monday - Friday, 09:00 - 17:30 hours, however, there will be times where you will be required to put in extra hours.Skills: Communication skills,Attention to detail,Organisation skills,Team player,Ability to use your initiative,Self-motivated....Read more...
Graduate Electrical EngineerFrankfurt €40,000 + Accommodation Covered + Monthly Flight + Career Progression + Technical Training + Holidays + Private Healthcare + Immediate Start Are you a recent Electrical Engineering graduate ready to launch your career with a global leader in technical construction and engineering?Join a renowned main contractor working on multiple £100M+ projects across the UK and Europe. This is a unique opportunity to step into a role where no two days are the same. You'll be learning hands-on from some of the most experienced professionals in the industry, gaining exposure to multiple project stages and developing a well-rounded skill set. You will be working on a new and exciting data centre project in Germany.This company is a world leader in delivering high-tech construction solutions across sectors such as data centres and mission-critical facilities. With a strong global presence, there are exciting opportunities for travel around Europe. This role offers a structured path for rapid career progression, setting you firmly on course toward senior leadership roles such as Senior Project Manager and Project Director. As A Graduate Electrical Project Engineer, You Will Have:
A Degree within Electrical Engineering
Proactive mindset - Learn from leaders in the industry and be prepared to be working hard!
Drivers licence
EU Passport
Your Role As A Graduate Electrical Project Engineer Will Include:
Site based Mon - Fri
Undertaking MEP works within various high-tech construction projects
Training and progression pathways onto senior roles
Apply now to be part of a fast-growing, global team shaping the future of mission-critical engineering.
Keywords: Process Systems Coordination, Stakeholder Management, Project Coordination, Graduate,Graduate Electrical Project Engineer, Electrical Engineering Projects, MEP Works (Mechanical, Electrical & Plumbing), Maynooth, County Kildare, Greater Dublin Area, Ireland, Junior Electrical role, Trainee Electrical, Frankfurt, EU , Germany, Electrical Graduate....Read more...
Embedded Software Engineer – Biotech or Medical Devices – Cambridge
An established and growing Biotech and Medical Devices company, based in Cambridge, is currently looking for an Embedded Software Engineer to join them and take responsibility for the continued development of their software on electro-mechanical devices that are used in the biotech and medical devices sectors.
Based in Cambridge, you will be working alongside scientists, engineers, designers, physicists and other medical devices and biotech industry experts in the development this cutting-edge medical device.
Ideally, you will have worked within the Biotech or Medical Devices sectors previously and have knowledge of ISO 13485, IEC 62304 and ISO 14971.
The company has the unique ability to offer an excellent benefits package, pension, medical insurance, life assurance and some other excellent benefits alongside a competitive starting salary.
We are looking for someone to start as soon as possible and interviews will happen quickly, with this in mind, if you are interested in the role, I suggest making an application now or risk missing out.
For more information, please feel free to call Andrew Welsh, Director of Medical Devices, Biotech and Drug Discovery recruitment specialists, Newton Colmore, on +44 121 268 2240 or submit an application, and a member of our team at Newton Colmore will be in touch with you.
....Read more...
JOB DESCRIPTION
GENERAL PURPOSE OF THE JOB: The Field Engineering team supports projects with diverse scopes of work. As a Field Engineer, you will be responsible for organizing, researching, and documenting cross-departmental assignments that contribute to the growth and operational excellence of Pure Air Control Services, a division of Weatherproofing Technologies, Inc.
ESSENTIAL DUTIES AND RESPONSIBILITIES:
Read and interpret blueprints, technical drawings, schematics, and computer-generated reports. Coordinate with multi-disciplined teams, including sales personnel and field team, to develop a scope of work and estimate the cost of a project. Organize material and complete reports according to pre-defined standards regarding order, clarity, conciseness, style, and terminology. Gather and analyze large amounts of technical data, drawings, and field notes to develop a clear understanding of building HVAC systems. Translate incomplete or fragmented information into accurate system concepts, identifying key mechanical, electrical, and control components. Evaluate project requirements, specifications, and system layouts to determine where company products and solutions can be effectively integrated. Clearly explain technical observations and engineering assessments to project managers, sales teams, and operations staff in both verbal and written form. Prepare concise reports highlighting system conditions, risks, and recommended actions, tailored for both technical and non-technical audiences. CERTIFICATES, LICENSES, REGISTRATIONS:
Bachelor's degree in mechanical engineering field (preferred) Ability to obtain Engineer Intern certification (preferred) Minimum of 3 years of experience in the HVAC industry, including design consulting, commissioning, or test and balance. CxA (Certified Commissioning Authority) or CxT (Certified Commissioning Technician) certification preferred; candidates actively pursuing certification will also be considered. OTHER SKILLS AND ABILITIES:
Working knowledge of Heating, Ventilation, and Air Conditioning systems. Familiarity with current building, energy, and mechanical codes and standards. Understanding of HVAC design principles, including heating load, air change, and ventilation requirements, and applying different HVAC systems (Constant volume, VAV, 100% OA, ERV units, etc.). Understanding of HVAC engineering fundamentals, including load calculations, conceptual systems analysis through construction documentation design, equipment design and layout, and duct and pipe sizing. Customer service oriented. Proficient computer skills and strong technical writing skills. Proficient in Microsoft Office Suite (Word, Excel, and Outlook). Well organized and possess superior time management abilities to support several projects simultaneously. Self-motivated and self-directed while remaining a team player. Ability to travel out of state up to 50% of the time.
This role offers the opportunity to expand into project management responsibilities, with Field Engineers eventually overseeing small projects and coordinating with internal teams to ensure successful delivery.
The salary range for applicants in this position generally ranges between $58,000 and $75,000. This range is an estimate, based on potential employee qualifications, operations, needs, and other considerations permitted by law. Tremco offers a variety of benefits to its employees, including but not limited to: health insurance, paid time off, 401(k) with company match, Company Pension Plan, and continuing education. Qualified applicants will receive consideration for employment without regard to their race, color, religion, national origin, sex, sexual orientation, gender identity, protected veteran status or disability.Apply for this ad Online!....Read more...
Graduate Engineer
London - Opportunity for Germany!
£38,000 - £40,000 + Travel Allowance + Accommodation + Pension + Holidays + Private Medical Insurance + Technical Career Progression + Package + 'Immediate Start'
Are you a recent engineering graduate looking to launch your career with a leading main contractor delivering high-tech technical construction projects across the UK and Europe? This is your chance to gain hands-on experience and take on a pivotal role in some of the most advanced data center projects in the industry.
Are you ready to fast-track your career and make an impact on a global scale? Joining the data center industry means:
Rapid career progression: You will be equipped with the skills to lead sooner than you think.
Cutting-edge technical expertise: Work with advanced technology that powers AI, cloud computing, and the digital world.
Worldwide opportunities: Be part of a global network with placements across the world (Europe + America).
With your first-class degree and ambition, you’ll thrive in an industry where innovation meets opportunity. Build a career that’s dynamic, challenging, and impactful!
This is an exciting opportunity to work with a specialist contractor known for delivering complex, high-value projects across the UK and Europe. You'll be at the forefront of cutting-edge digital infrastructure, managing multimillion-pound schemes and ensuring seamless execution from planning to completion. Be part of a dynamic environment where you can progress your skillset and career.
Your Role as a Graduate Engineer Will Include:
Assisting in the planning, coordination, and execution of data center projects.
Working closely with subcontractors, suppliers, and on-site teams to maintain project efficiency and safety compliance.
Developing key skills in project coordination
As a Graduate Engineer, You Will Have:
A degree in Mechanical, Electrical, or Building Services Engineering.
A proactive attitude with a strong work ethic and eagerness to learn.
The ambition to progress within a main contractor, with structured career development opportunities.
EU Passport - travel to countries in Europe + Drivers Licence
Ready to take the next step? Any questions ask Dea Totaj on 07458163032.
Keywords: Graduate Engineer , Junior Engineer, Trainee Engineer, UK, London, Birmingham, Manchester, Glasgow, Edinburgh, Liverpool, Leeds, Bristol, Sheffield, Newcastle, Nottingham, Leicester, Coventry, Southampton, Cardiff, Belfast, Aberdeen, Portsmouth, Derby, Wolverhampton, Loughborough University, Trinity College Dublin, Imperial College London, Durham University, University of Sheffield, University of Warwick, University of Cambridge, University of Oxford, University of Manchester, University of Bristol.....Read more...
This Junior Project Engineer / Graduate Process Engineer role offers structured training, mentorship, and clear career progression with an international, market-leading manufacturing business committed to sustainability and operational excellence.
This is an exciting opportunity for a Graduate Engineer, Junior Project Engineer, Junior Process Engineer, or Maintenance Engineer who is keen to develop their career within Operational Excellence, Process Improvement, and Project Engineering.
You will join a supportive Continuous Improvement team and be trained to contribute to manufacturing improvement initiatives, capital projects, and continuous improvement activities across engineering, maintenance, and production operations, close to the Sevenoaks, Kent area.
The Role of Junior Project Engineer Within this role, you will support and participate in a wide range of engineering and operational improvement projects, helping to improve manufacturing capability, efficiency, reliability, and safety.
You will gain exposure to:
Process improvement and problem-solving techniques
Capital investment and engineering projects
Data-driven improvement of manufacturing performance
Cross-functional collaboration with engineering, maintenance, and operations teams
This position is ideal for someone looking to build a long-term career in Process Engineering, Project Engineering, or Operational Excellence.
What’s on Offer as Junior Project Engineer
Base salary circa £40k per annum + KPI-related bonus
Monday to Friday days based positon
Extensive training and development programme
Clear career progression pathway into CI / Process Improvement roles
Enhanced company pension scheme
Opportunity to work on impactful projects that improve efficiency, sustainability, and safety
Supportive, people-focused working environment
Day-based role – Monday to Friday
Key Responsibilities of Junior Project Engineer
Support the identification and delivery of process and operational improvement opportunities across manufacturing and engineering operations
Assist with engineering and capital projects, from concept through to implementation
Collect, analyse, and interpret data relating to OEE, downtime, productivity, and takt times
Support problem-solving activities using structured root cause analysis techniques
Contribute to Lean manufacturing and continuous improvement initiatives
Support maintenance and asset performance improvement programmes
Work collaboratively with engineering, operations, and maintenance teams
Develop technical and professional capability through structured training and mentoring
About You This role may suit a Graduate Engineer, Junior Project Engineer, Junior Process Engineer, or Maintenance Engineer with the ambition to develop within Operational Excellence. You will ideally have:
HNC, HND, Foundation Degree, or Degree in Engineering (Mechanical, Electrical, Manufacturing, Chemical Engineering or similar)
Some experience within a manufacturing, engineering, or industrial environment (placements, internships, or early-career roles welcome)
A strong interest in process improvement, project delivery, and manufacturing excellence
Good problem-solving and analytical skills
Strong communication skills and the ability to work cross-functionally
A proactive, “can-do” attitude and willingness to learn
An interest in Lean, Continuous Improvement, or Six Sigma (training provided)
Why Join? This is a fantastic entry-level to early-career opportunity to join a business that invests heavily in its people, values sustainability, and encourages innovative thinking. You’ll be supported to grow your skills, take ownership of projects, and build a rewarding engineering career.
APPLY NOW to take the next step in your engineering career!....Read more...
Mobile Electrical Maintenance Engineer - FM Service Provider - Commercial Buildings - Somerset & Surrounding Counties - Up to £43,000 Exciting opportunity to work for an established FM service provider situated in Bristol. CBW is currently recruiting an Electrical Maintenance Engineer to be based across commercial environments, including mainly schools & offices, as well as various other commercial buildings. The successful candidate will be a fully qualified Electrical Maintenance Engineer with a proven commercial/property building maintenance track record. He or she will be required to carry out Electrical planned and reactive maintenance. PackageSalary up to £43,000Travel time paid after 30 mins each wayPrivate Medical care for employee and family8% contributory pensionSick payContinued trainingSports and social club24 days holiday + Bank Holidays - You can also purchase extra holidaysSubsidised gym membershipChild care voucher schemeKey Duties & ResponsibilitiesLighting (Small installation, Fault-finding, Lamping, Changing ballasts, Control panel, Power distribution)Emergency lightingSmall works – new sockets, new lights, new circuitsAssisting in the mechanical & fabric maintenance on siteAny reactive and planned maintenance on siteHours of Work Monday to Friday (40-hour week) 08:00 am to 17:00 pm RequirementsElectrically qualified - You must be able to provide copies of your trade certificatesCity & Guilds/NVQ Level 2 Essential City & Guild/NVQ Level 3 Essential City & Guilds - 18th EditionA proven track record in commercial or property maintenance Installation experienceExcellent customer service skillsHappy to cover a large site Honest, hard-working and reliablePlease email your CV to Archie Reed at CBW Staffing Solutions to avoid missing the opportunity.....Read more...
Van Mobile Maintenance Engineer - FM Service Provider - Mobile (London & M25) - Up to £45,000 Exciting opportunity to work for a family-run FM service provider situated in London & M25. CBW is currently seeking for 2 x Electrical / Mechanical Maintenance Engineers to cover the region of approximately 10-15 commercial buildings located in London & M25 area. The successful candidates will be mechanically or electrically biased (C&G / NVQ) with a proven track record in commercial building maintenance. This is a mobile position and will require the successful candidates to attend a number of sites where they will be required to carry out PPM/Reactive maintenance to electrical and mechanical plant with particular emphasis on electrical & mechanical maintenance. In return, the company is offering a competitive salary paying up to £45,000 per annum based on experience/qualifications, a company van with fuel card and float, overtime and further training on offer! Hours of work: Monday to Friday Hours: 08:00 am to 17:00 pm Key duties & Responsibilities:Weekly Fire Alarm Tests and logWeekly AOV test and LogL8 water hygiene monitoringFan Coil Unit servicingHIU/CIU servicing (Training will be given)AHU servicingMVHR servicingWeekly/Monthly Generator test and logWeekly CHP Checks and logMonthly Car Park smoke ventilation test and logMonthly/Annual Emergency Lighting test and logSupervision of Sub ContractorsAssist with the preparation of Quotations for remedial works.Be available for duty call-out cover, on a Rota basis (currently 1 in 8)Requirements:City & Guilds / NVQ in Mechanical Engineering / PlumbingYou must be able to provide copies of your trade certificates (Essential)A proven track record in commercial building maintenanceAn understanding of commercial building maintenanceMulti-skilledGood communication skillsExcellent customer service skillsPackage:Up to £45,000 (Based on experience / Qualifications)Company Vehicle with Fuel card and FloatCall out 1 in 8 PDA's23 days holiday + BHOvertime availableTraining and development opportunitiesContributory pension scheme Please send your CV to Bailey White at Cbw Staffing Solutions for more information!....Read more...
Fitter/Welder Fabricator £17.09 Private medical contributions for employee & family (50%). Pension scheme. 23 days holiday + public holidays. Holidays increase with 1 day per year served. 0830-1630. Overtime regularly availableA leading Automotive Engineering business, the company are recruiting for a Welder Fabricator/Fitter. This is a varied role, which includes mechanical fitting, fabrication and welding. The ideal candidate would be able to MIG and TIG (however the company would be able to train someone in TIG welding if they wanted to learn this skill).Key Duties of the Fitter/Welder Fabricator position:
MIG/TIG working predominately with Mild Steel, Stainless Steel
Fabrication of Mounting brackets.
Fit and install, commission and test equipment fitted to vehicles on or off-site.
Desirable work experience with:
Hydraulic or pneumatic systems
Worked within the Automotive sector
We would be very keen to speak to people who have experience welding and working in the following roles: HGV Technician. Plant Fitter, Hydraulic engineer, Vehicle technician Forklift truck engineer. Benefits of the Fitter/Welder Fabricator role:
£16.80 an hr plus, company bonus
Private Medical Insurance
Days/No shifts
Regular overtime available
Holiday increase 1 day per every year served
If you would like a private chat about the Fitter/Welder Fabricator role, please contact Rodger Morley at E3 Recruitment.....Read more...
Mechanical Engineer – Programme Manager - Medical Devices – Cambridge
Due to a growth in company output, there is a need for a new Programme Manager who has a Mechanical Engineering pedigree. Based in Cambridge, you will be leading several projects. Some projects will involve you offering support and mentorship to junior members of staff, while other projects will involve you taking on the mechanical design aspects yourself.
We are looking for someone who has been working hands on developing new Medical Devices technologies in their current role, while mentoring other members of staff. Most projects will be on electro-mechanical Medical Devices, so you will need to have worked on these types of technologies. They could be implantable medical devices, wearable tech or another medical technology that abide by EN60601 standards.
Apart from past work experience, it is expected that you would hold a relevant degree within a suitable subject that led you into a Medical Devices Mechanical Engineering role. It would also be advantageous if you hold a master’s or PhD, but not essential as the active work experience in industry is more important.
The types of technologies you will be developing are lifesaving and life improving medical devices, truly industry disrupting technologies that will save and improve thousands of people’s lives.
This role will involve working with external and internal entities, involving a lot of communications both virtual and in real life, due to this it would be advantageous if you have worked in a role that involved communicating updates and project changes continuously.
I mentioned knowing about EN60601, but it would also be essential to have a strong understanding of ISO 13485.
People who have been successful in this role previously tend to have a highly technical hobby, this could be building drones, tinkering with engines, computer programming or another hobby that involves problem solving. If you do have such a hobby, make sure you highlight it on your CV to give you the best chance of gaining an interview.
Apart from working on industry changing technologies, you will be offered a proven career development plan, continuously training to keep you at the forefront of the medical devices sector, excellent salary, bonus, enhanced pension, medical insurance, free meals and other excellent benefits you’d expect from a multinational blue-chip organisation.
I expect a lot of interest in this role, so apply now or ensure consideration.
For more information, please contact Andrew Welsh, Director of Medical Devices, Biotech and Drug Discovery Recruitment at Newton Colmore, on +44 121 268 2240. Alternatively, submit your application and a member of our team will be in touch. Please note that without a CV, we can only provide limited information.....Read more...
Ex-Forces Engineers Wanted – Building Services / Facilities Maintenance - London Maintenance Engineer (Electrical or Mechanical)Commercial Buildings – City of LondonMultiple Roles Available Are you ex-Army or Navy with an electrical or mechanical background and looking to transition into building services or facilities maintenance? We are currently recruiting multiple Maintenance Engineers for a well-established FM / building services provider, working across high-profile commercial buildings in the City of London. These roles are well suited to ex-forces engineers who thrive in structured environments and are looking for a stable civilian career with clear procedures, strong training, and long-term progression. You will be joining professional on-site engineering teams, carrying out planned and reactive maintenance while continuing to develop your technical skillset within commercial building services. Roles Available We currently have multiple positions available on the following patterns: Monday to Friday (Days)08:00 – 17:00Continental Shift Pattern4 nights on / 4 off 3 days on / 3 nights on 6 off 4 days onShift Times:07:00 – 19:00 / 19:00 – 07:00What’s on OfferOvertime available23 days holiday + bank holidays (pro rata for shifts)Ongoing training and development within building servicesCompany pensionStable, long-term roles within a professional FM environmentKey ResponsibilitiesPlanned and reactive maintenance across electrical and mechanical systemsLighting (lamp changes, fault finding, small installations)Emergency lighting and fire alarm testingPlant room checks and maintenanceAHUs / FCUs (filter changes, cleaning)Pumps, motors, control panelsBasic BMS monitoring (hot & cold)General M&E and fabric maintenanceLogbook and compliance updatesBasic plumbing worksRequirementsEx-Army or Navy engineers strongly encouraged to applyElectrical or Mechanical qualificationElectrical: City & Guilds Level 3 (or military equivalent)Mechanical: City & Guilds Level 2 (or military equivalent)Ability to provide trade certificates or service recordsMaintenance experience (military or civilian)Strong work ethic and communication skillsComfortable in a client-facing commercial environmentIf you’re interested in transitioning into building services/facilities maintenance, please send your CV to: Alex Denton of CBW Staffing Solutions....Read more...
As an apprentice, you’ll support the vital need to uphold quarry and cement site production
You’ll be dismantling, examining, replacing, and reassembling mechanical and electrical systems and components
Servicing and maintaining equipment
Working on yellow machinery to equipment that deals with dust; there will be lots to learn
Training:You will attend college in either Loughborough or Derby which will be on a day release basis for 3 years. The choice of college will be dependent on where you live.
As an electro-mechanical multiskilled apprentice, you will be studying to become a multi skilled engineer, you will also complete your electrical wiring regulations qualification – 18th Edition.Training Outcome:There are opportunities to not only become a qualified maintenance technician, but also progress into area and management roles.Employer Description:Breedon is a leading construction materials group in Great Britain and Ireland. Our GB division comprises fully-integrated aggregates and downstream products businesses throughout the UK . We supply aggregates, asphalt, ready-mixed concrete & mortar and concrete blocks, together with a range of specialist building products including clay bricks and tiles, other clay products, decorative aggregates and Welsh slate, which are sold throughout the UK and Ireland.Working Hours :Start and finish times to be confirmed. Monday to Friday.Skills: Communication skills,IT skills,Attention to detail,Problem solving skills,Number skills,Analytical skills,Logical,Team working,Initiative,Patience....Read more...
Hot Fire Space Thruster Test Engineer required join a very busy space thruster test facility focusing on Hot Fire Testing programmes. The ideal candidate will understand space thruster theory particularly the ground test of thrusters for the design and manufacture of liquid propellant and high pressure gas feed systems.
You will have an input to Research and Development and other space propulsion related activities so need to be proficient in analysing and assessing test data including collation and analysis then presentation graphs, tables, etc.
Requirements
Space thruster Knowledge
Understand propellant MIL spec analysis, Military Standard Propellants
Chemical laboratory techniques and processes
Mechanical fitter/practical engineering skills preferably gained from an apprenticeship or from within an engineering related organization.
Responsibilities
Site preparation and maintenance
Fuel and oxidiser handling
Pressure systems
Instrumentation
Control systems
Space thruster theory
Steam boiler operation
Data analysis
Site and system safety....Read more...
Mechanical Engineer – Programme Manager – Drug Delivery Devices
A period of significant growth has created an opportunity for a Programme Manager with a strong Mechanical Engineering background and deep, hands‑on experience in drug delivery device development. Based in Cambridge, you will lead multiple programmes focused on advancing next‑generation delivery platforms. Some projects will see you mentoring and guiding junior engineers, while others will require you to take ownership of core mechanical design activities yourself.
We are seeking someone who is currently working at the forefront of drug delivery technologies—such as autoinjectors, inhalers, infusion systems, wearable delivery devices, or other combination products—and who is confident translating complex user, clinical, and regulatory requirements into robust mechanical solutions. Experience with electro‑mechanical medical devices is highly advantageous, as many of the programmes you will lead involve integrated systems and multidisciplinary collaboration.
To succeed in this role, you will need to be commercially minded, able to balance technical innovation with real‑world product viability. You should have experience successfully taking medical or drug delivery products through development and into market launch, understanding the commercial, regulatory, and manufacturing considerations that shape decision‑making. This is a highly collaborative environment, so you must be comfortable working closely with internal teams, external partners, clients, and suppliers to drive programmes forward efficiently and strategically.
A strong academic foundation in Mechanical Engineering or a related discipline is expected. A master’s degree or PhD would be beneficial, but industry experience in developing regulated drug delivery systems is the key requirement. Familiarity with EN60601 is useful, and a solid working knowledge of ISO 13485 and design controls for combination products is essential.
The technologies you will help shape are genuinely life‑changing—innovative drug delivery systems that improve therapeutic outcomes, enhance patient adherence, and ultimately transform lives on a global scale.
This position involves extensive communication with internal teams, external partners, and clients, so experience in roles requiring regular project updates, stakeholder management, and cross‑functional coordination will be valuable.
Many individuals who excel in this environment have a naturally technical mindset and enjoy hands‑on problem solving—whether that’s building drones, programming, tinkering with engines, or similar hobbies. If this sounds like you, make sure it’s visible on your CV.
In return, you’ll join a world‑class organisation offering a clear career development pathway, continuous technical training, an excellent salary, bonus scheme, enhanced pension, medical insurance, free meals, and the full suite of benefits expected from a global blue‑chip company.
Interest in this role will be high, so early applications are encouraged.
For more information, please contact Andrew Welsh, Director of Medical Devices, Biotech and DeepTech Recruitment at Newton Colmore, on +44 121 268 2240. Alternatively, submit your application and a member of our team will be in touch. Please note that without a CV, we can only provide limited information.....Read more...
Senior RF Antenna Design Engineer – Electronic Warfare
Location: Lincoln, Lincolnshire (Hybrid)
An exciting opportunity has arisen for a Senior RF Antenna Design Engineer to join a confidential, UK-based defence technology organisation specialising in electronic warfare systems. This role sits within a growing and highly capable RF engineering team developing advanced antenna and RF subsystems across HF to SHF frequencies for complex, mission-critical applications.
This position is ideal for an experienced, hands-on RF and antenna engineer who enjoys technical ownership, solving complex electromagnetic challenges, and mentoring junior engineers, while contributing to the development of a strong UK-based R&D capability.
Main Responsibilities of the Senior RF Antenna Design Engineer (Lincoln / Hybrid):
Design, simulate, and develop RF and microwave antenna systems for electronic warfare applications
Own antenna and RF design activities from concept through simulation, prototyping, test, and production handover
Carry out electromagnetic modelling and optimisation using CST, HFSS, Keysight ADS and Microwave Office
Act as a senior technical contributor on projects, supporting architectural decisions and design reviews
Collaborate closely with RF, electronics, systems, and mechanical engineers to ensure optimal system integration
Support development of RF subsystems including filters, amplifiers, switches, and associated control interfaces
Perform antenna, RF, and EMC testing, correlating lab results with simulation data
Produce high-quality technical documentation and contribute to internal and customer-facing reviews
Mentor and technically support junior RF and antenna engineers within the team
Support proposal activity, requirements definition, and early-stage concept development where required
Requirements of the Senior RF Antenna Design Engineer (Lincoln / Hybrid):
Proven experience in RF and microwave antenna design for defence, electronic warfare, or other high-reliability environments
Strong grounding in electromagnetic theory, RF propagation, and antenna performance metrics
Hands-on experience with CST, HFSS, Keysight Microwave Office and ADS
Practical experience across simulation, prototyping, measurement, and validation
Experience contributing to or leading technical projects and mentoring junior engineers
Ability to communicate complex RF concepts clearly within multidisciplinary teams
British passport holder required due to security clearance requirements
Working Pattern & Benefits:
Full-time, permanent role
Hybrid working, with regular onsite presence in Lincoln
Competitive salary and benefits package
Opportunity to work on cutting-edge electronic warfare antenna and RF technology
Technically driven environment with strong long-term career progression
To apply for this Senior RF Antenna Design Engineer role, please send your CV to Kishan Chandarana:
Kchandarana@redlinegroup.Com
01582 878 830....Read more...
Core Responsibilities:
Servicing & Maintenance: Performing routine checks on air compressors, dryers, filters, and vacuum equipment to ensure optimum efficiency.
Fault Diagnosis & Repair: Identifying mechanical or electrical issues and conducting fault-finding missions to restore systems.
Training Outcome:Becoming a service engineer within the compressed air industry.Employer Description:ACS Compressed Air Technology Ltd (formerly Aylesbury Compressor Services Limited) is an independent UK-based specialist in the sales, installation, and maintenance of industrial compressed air and vacuum systems. Established in 2011 and headquartered in Aylesbury, the company provides nationwide coverage for a broad range of pneumatic solutionsWorking Hours :Monday to Friday, 07.00 - 16.00.Skills: Attention to detail,Customer care skills,Team working,Initiative,Patience....Read more...
Quality Engineer – Cambridge – Medical Devices
We are currently looking for a Quality Engineer for a growing Medical Devices organisation based in Cambridge. The company work on a range of different Medical Devices, providing a variety of projects and tasks in your role.
You will collaborate various Medical Devices experts, including Mechanical Engineers, Physicists, Electronics Engineers, Software Engineers, and other professionals. Your primary focus will be on Quality Assurance of Medical Devices to ISO 13485 standards, although knowledge of EN 60601 would also be advantageous.
Your responsibilities will include creating technical files and testing documentation. If you have experience of Design Assurance, this would also enhance your approach to this work.
We would expect you to have a degree that led you into a Medical Devices Quality Engineering career. However. if you have another route into a Medical Devices role, we would still be keen to hear from you.
In addition to working on various Medical Devices, you will be rewarded with an excellent starting salary, a bonus, a generous pension, life assurance, healthcare, and other excellent benefits.
Given the anticipated interest in this role, if you are looking for a new opportunity, I suggest making an application now to avoid missing out.
For more information, please feel free to call Andrew Welsh, Director of Medical Devices recruitment, Science recruitment and Biotech recruitment specialists Newton Colmore Consulting, on +44 121 268 2240 or make an application and one of our team at Newton Colmore Consulting will contact you.....Read more...
Electrical Maintenance Engineer (Cover / Support Engineer – Semi-Static) - London - up to £43,000+ Zones 1-2 travel card Location: London (City, Canary Wharf, West End)Salary: up to £43,000 + Zones 1–2 Travelcard + OvertimeHours: Monday – Friday, 08:00 – 17:00The OpportunityWe’re offering an exciting opportunity for an experienced Electrical Maintenance Engineer to join one of the fastest-growing maintenance providers in London and the South East.As a Cover Engineer, you'll work across a portfolio of high-end commercial office buildings, stepping in during planned and unplanned absences (e.g. holidays, sickness) of site-based engineers. You'll also assist with quoted works and tenant maintenance projects. This role offers variety, autonomy, and clear progression into senior roles such as Supervisor.Key ResponsibilitiesProvide engineering support across multiple commercial office sitesCarry out both electrical and mechanical PPM (Planned Preventative Maintenance) and reactive maintenanceSupport tenant and project works, ensuring smooth delivery of additional servicesManage and liaise with subcontractors for specialist servicesEnsure compliance with all statutory requirements, including:Fire alarmsEmergency lightingWater treatmentHVAC systems, including AHUs and FCUsComplete reports, logbooks, and assist with monthly compliance documentationOccasionally work out-of-hours or attend call-outs (where applicable)Salary & PackageBasic Salary: up to £43,000 (depending on experience)Zones 1–2 TravelcardPlenty of overtime available25 days annual leave + bank holidaysPrivate medical insurance (after probation)Rewards Gateway platform (retail discounts)Cycle to Work SchemeSeason Ticket Loan (after 6 months)Training and genuine career development opportunities (pathway to Supervisor roles and beyond)What We're Looking ForCity & Guilds Level 2 & 3 in Electrical Installations (or equivalent)18th Edition Wiring RegulationsPrevious experience in commercial building maintenanceGood understanding of health & safety and statutory complianceConfident, client-facing, and reliable with strong communication skillsWilling to travel within Zones 1–2 and work semi-static across key sitesIf you are interested please get in touch with Alex from CBW Staffing Solutions....Read more...
Irrigation Engineer - FM Service Provider - London (Foot Mobile) - £45,000 - £50,000 per annum An exciting opportunity to work for a long-established FM service provider based in London. CBW are currently recruiting for an Irrigation Engineer to cover 7 high-end residential sites, primarily around the Canary Wharf area. The successful candidate will have proven experience working with irrigation systems, including planned preventative maintenance (PPM), reactive repairs, seasonal works, and fault-finding. However, will also consider more junior mechanical engineers who are looking to get into the field. In return, the company offers a competitive salary of up to £50,000 per annum (based on experience), 24 days Holiday + Bank Holiday, £160 per month travel allowance, Private healthcare insurance, company pension, overtime available, and excellent further Irrigation and Specialist training. Working Hours: - Monday to Thursday - 7:30 am - 17:00 pm - Friday - 07:30 am - 16:00 pm Key Responsibilities:Carrying out all irrigation PPM tasks across site portfolios.Spring start-ups and winterisation of irrigation systems.Reactive maintenance and fault-finding on irrigation systems.Carrying out repairs in the field, including emergency repairs during peak summer periods (e.g. deluge systems).Inspecting, testing, and maintaining valves, pipework, controllers, pumps, and associated irrigation components.Diagnosing system faults and restoring full service efficiently.Ensuring systems operate efficiently and in line with seasonal requirements.Completing detailed service reports and providing clear recommendations to clients and management.Working independently across multiple sites as a foot-mobile engineer. Requirements:Proven experience working as an Irrigation Engineer / Irrigation Specialist.Strong knowledge of irrigation systems, controls, pipework, and associated equipment.Experience carrying out PPM, reactive maintenance, and repairs.Ability to fault-find and work independently.Good communication skills with a professional, customer-facing approach.Full understanding of seasonal irrigation requirements (spring start-ups and winter shutdowns). If you are interested in this role, please contact Bailey White at CBW Staffing Solutions, so that you don't miss out on this excellent opportunity!....Read more...
Field Service Engineer – Premium Automotive Equipment
Typical Earnings: Around £37,000 (base + bonus) – with potential to earn more
Benefits Include: Fully equipped company van, Pension & healthcare, Tax-free lunch allowance (~£1,160/year), Monday to Friday – no weekends, Premium product training and ongoing support
4 days per week in the field, one office day per week (this can be home office based)
Location: Field-based across Southern England. Ideal home locations include:
Oxfordshire, Buckinghamshire, Berkshire, Gloucestershire, Essex, Kent, and surrounding areas (e.g. Milton Keynes, Oxford, Banbury, Reading, Swindon, Chelmsford, Maidstone, Bristol, High Wycombe, Basingstoke)
Why This Role Could Be Perfect for You
Work hands-on with premium automotive equipment, applying your mechanical, electrical, or hydraulic skills in real-world settings
Join a market-leading brand with a reputation for quality, innovation, and excellent customer service
Enjoy variety and independence — every day is different, with travel across the region and occasional overnight stays
Receive top-class training and support to help you transition confidently into the automotive sector
Be part of a company culture that values professionalism, pride in workmanship, and mutual support
This is a great fit for a field-based engineer who enjoys solving problems on site, working independently, and making a visible impact.
The Role
Service, calibrate, and maintain automotive equipment at customer sites
Install new equipment and deliver start-up training
Support the Technical Sales team with product demonstrations
Complete admin tasks and update the CRM system
Spot opportunities to grow service, training, and repair business
Who We’re Looking For
Strong mechanical, electrical, or hydraulic engineering background
Field service experience preferred (but not essential if you have transferable skills)
Health & safety aware, with a customer-first mindset
Full UK driving licence and willingness to travel daily with some overnight stays
No automotive experience? No problem. We welcome candidates from construction equipment, agricultural machinery, off-highway, marine, commercial vehicle, or capital equipment sectors.
If you’ve got field service experience and a desire to learn, we’ll give you the tools and training to succeed.
Personal Attributes
Self-motivated and organised
Able to manage your own time and workload
Strong problem-solving skills and attention to detail
Professional, customer-focused, and proud of your work
Register Your Interest
If this sounds like your kind of role, we’d love to hear from you.
Send your CV to Kayleigh Bradley, Senior Recruiter at Glen Callum Associates Ltd, or call Kayleigh for a confidential chat on 07908 893621.
Job Reference: 4288KBC – Field Service Engineer
Glen Callum Associates specialises in automotive recruitment, connecting exceptional talent with leading organisations worldwide.
Glen Callum Associates is committed to creating diverse and inclusive workplaces. We welcome applications from all qualified candidates regardless of gender, age, ethnicity, disability, sexual orientation, or background. We believe that a variety of perspectives makes a team stronger and a workplace better. If you need any adjustments during the recruitment process, please let us know—we’re here to support you.
Applicants must be eligible to work in the UK. We are unable to offer sponsorship.....Read more...
