We’re currently recruiting an experienced Electronic Hardware Design Engineer to join a forward-thinking team developing cutting-edge solutions across the Defence, Industrial, and Scientific sectors. This is a hands-on design role offering a real opportunity to influence complex electronic systems from concept to production.Key Responsibilities:
Design and development of digital and analogue electronic hardware for advanced embedded systems.
Ownership of full hardware lifecycle: concept, schematic capture, PCB layout, prototyping, and validation.
Development and execution of test plans, specifications, and procedures.
Close collaboration with software, mechanical, and systems teams.
Support production, troubleshooting, and design-for-manufacture improvements.
Technical customer support and occasional site visits.
Authoring and maintenance of detailed design documentation.
Provision of consultancy and subject-matter expertise to clients when required.
Essential Requirements:
Proven experience in FPGA design and VHDL programming.
Extensive hands-on PCB design and layout experience, ideally using Altium Designer.
Strong understanding of digital and analogue circuit design, including high-speed switching and signal integrity considerations.
Working knowledge of EMC design principles.
Experience with A/D and D/A converters and supporting circuitry.
Desirable:
Familiarity with high-voltage circuit design.
Understanding of optical systems and electronics.
If you're looking for a technically stimulating role in a company that values innovation, collaboration, and work-life balance, apply now and one of our team will be in touch shortly.....Read more...
Full understanding of the types of lift products
Hands on experience to understand the requirement and placement, excelling knowledge of the materials within the lift shaft
Act as an ambassador of Mitsubishi Electric when attending construction sites
Actively support any initiatives to reduce the number of hours spent through general improvements in the lift installation hours provided
Support any improvement/efficiency initiatives for the Installation department and the larger organisation
Understand fully and comply with all site health and safety requirements
Understand and fully comply with all relevant internal processes and policies
Any other reasonable duties as instructed by the operations team
Training:Lift and Escalator Engineering Level 3.
The successful applicant will receive on the job training, and in house product training and technical training. 6-hours a week will be dedicated to off the job training which will be conducted either in the office or at home.Training Outcome:The chance to become a fully qualified lift service engineer.Employer Description:We, the Mitsubishi Electric Group, contribute to the realisation of a vibrant and sustainable society through continuous technological innovation and ceaseless creativity. "Changes for the Better" represents the Mitsubishi Electric Group’s attitude to "always strive to achieve something better", as we continue to change and grow. Each one of us shares a strong will and passion to continuously aim for change, reinforcing our commitment to creating "an even better tomorrow".Working Hours :Monday to Thursday to Friday 8am to 4.30pm.Skills: IT skills,Organisation skills,Team working,Initiative,Electrical knowledge,Mechanical knowledge....Read more...
Support in the maintenance, installation, and repair of automated machinery including conveyors, packaging systems, sensors, and PLC-controlled equipment
Assist in identifying and diagnosing faults in electro-mechanical systems
Carry out preventative maintenance tasks to ensure machinery uptime and safety
Work collaboratively with experienced engineers to troubleshoot real-time production issues
Contribute to continuous improvement projects within the engineering and production teams
Ensuring that Food Safety and Health and Safety standards are met and sustainably maintained
You are required to cooperate with HelloFresh in all health and safety matters and must report incidents immediately and actively raise health and safety-related concerns to your Line Manager
Develop the ability to undertake basic problem solving activities and escalating to the Senior Automation Engineer where necessary
Ensuring compliance with Standard Operating Procedures and Instructions
Being involved in ad hoc projects as and when required
Training Outcome:
HelloFresh is a large international company and there are many career paths open to you
Employer Description:At HelloFresh, we want to change the way people eat forever by offering our customers high-quality food and recipes for different meal occasions. Over the past 10 years, we've seen this mission spread around the world and beyond our wildest dreams. Now, we are a global food solutions group and the world's leading meal kit company, active in 18 countries across 3 continents.Working Hours :Monday- Friday
08:30- 17:30
1 hour for lunchSkills: Communication skills,Attention to detail,Problem solving skills,Number skills,Team working,Initiative,Non judgemental,Patience,Follow instructions....Read more...
Build, install, and fix different types of machinery and testing equipment
Work with mechanical, electrical, and pneumatic systems (those using air pressure)
Help create and update technical documents
Work with experienced engineers both in our workshop and out visiting customers
Understand how our business runs by spending time in different departments
Training:Mechatronics Maintenance Technician Level 3 Apprenticeship Standard:
This programme is delivered via a day release delivery model which means that one day per week, your attendance is required at our Engineering Campus (NG17). This attendance is required during term time only
You will work with expert assessors and tutors to develop new knowledge, skills and behaviours within the profession
You will experience a blended learning model
Training Outcome:
Once you complete your apprenticeship, you could move into a full-time role as a technician or engineer at Cerulean or another company within the Coesia Group
Employer Description:Cerulean is part of Coesia, a global group of companies known for creating high-tech machines and industrial solutions. We design and make precision testing equipment used by companies around the world, especially in the tobacco, food, and healthcare industries. With over 70 years of experience, we’re passionate about innovation and customer service.Working Hours :Monday - Thursday, 8.30am - 4.45pm and Friday, 8.30am - 3.30pmSkills: Communication skills,IT skills,Problem solving skills,Team working,Interest in engineering,Practical skills,Reliable and Punctual,Strong work ethic,positive attitude....Read more...
General Maintenance Operative - Client direct – Farringdon - Up to £20p/h Are you looking for a new role? Do you have building maintenance experience? Are you available to start immediately ? If the answer is yes, then read on...Exciting opportunity to work for a leading FM Service Provider situated in Farringdon, London. CBW is currently recruiting for a General Maintenance Engineer to be based in a unique working environment. The successful candidate will have an all-around understanding of most fabric duties and a proven track record in commercial building maintenance. Working within a team on-site, he or she will need to be level 2 quailed in either electrical, mechanical, plumbing or AC and will be required to carry out fabric PPM and reactive maintenance.Hours of work/Salary£20p/hMonday - Friday 8am - 4pm ( 40 hours paid weekly )Starting immediately Key duties & ResponsibilitiesPainting & DecoratingFabric maintenanceChanging locksBasic Plumbing dutiesBasic Electrical Duties General Building maintenance RequirementsA proven track record in all round commercial building maintenanceGood communication skillsHealth & Safety experienceBasic PC literacy, (Microsoft Word, Excel, Internet, smartphone use)Ability to deliver excellent customer serviceSelf-motivation with the ability to manage tight time constraints and prioritise workload If you are interested please email your CV to Cammie@cbwstaffingsolutions.com ....Read more...
Electrical Maintenance Engineer – Monday to Friday - Commercial Building – Piccadilly Circus, London - £42,000 Per annumMy client is looking for an electrical Maintenance Engineer based in Piccadilly Circus, London. The successful candidates will be electrically biased (C&G / NVQ) with a proven track record in commercial building maintenance. Working with the maintenance team on site (team of 2), He or she will be required to carry out electrical, mechanical and fabric maintenance to the following. In return, the company are offering a competitive salary of £45,000, further training and career progression. Package & Hours of work £45,000 Basic SalaryMonday to Friday 08:00 am to 17:00 pmUniform and Tools ProvidedCycle-to-work schemeOvertime AvailableAnnual pay reviewKey Duties & ResponsibilitiesLighting (Small installation, Fault-finding, Lamping, etc)Emergency lighting testsControl PanelsChanging BallastBMS System - Monitor (i.e. Hot & cold)Carry out all aspects of M&E/Fabric maintenanceMaintain and update Log booksPlumbing - Unblocking toiletsPumps, motorsCompliance and logbooksChillers and pressurisation unitsUndertake all allocated tasks and perform them in a timely and professional manner.Be proactive in identifying and reporting faults with building services equipment and take steps to resolve them.Be proactive to ensure all H&S issues are reported/escalated as required.Maintain informal communications with Client staff members related to service levels and issues.Report service affecting issued to the site management team for formal communication with the client.Remain flexible with regard to site attendance and tasks undertaken within personal competency.Be fully aware of relevant Health and Safety and general legislative matters.Escort specialist subcontractorsRequirementsElectrically qualified - City & Guilds Level 2&3City & Guilds - 18th EditionMust be able to provide copies of your trade certificatesA proven track record in commercial building maintenanceMulti-skilledGood communication skillsClient Facing If you are interested, please get in contact with Ben Miller of CBW Staffing Solutions.....Read more...
Electrical Maintenance Engineer – FM Service Provider - Commercial Building – St Paul's - Up to £47,000 An exciting opportunity to join an established building services company based in St Paul's has arisen! CBW Staffing Solutions are currently recruiting for an Electrical engineer to be based in a commercial office blue chip contract located by St Paul's. He or she will be required to carry out planned and reactive building maintenance alongside the maintenance team on site. The successful candidate will have a strong understanding of Facilities Maintenance and have a proven track record in Electrical or mechanical building maintenance. In return, the company is offering a competitive salary of up to £47,000, overtime, further training, and a potential route into further career progression. Hours of work & PackageMonday to Friday, 08:00am to 17:00pmCall out 1 in 2Season Ticket Loan (after 6 months’ service)Cycle to Work Scheme · Rewards Gateway platform Auto Enrolment PensionPrivate Medical Insurance – Inc Dental, Optical and audioDeath in Service (Salary x 2) Key Duties & ResponsibilitiesLighting (Small installation, Fault-finding, Lamping, etc)Emergency lighting testsControl PanelsChanging BallastBMS System - Monitor (i.e. Hot & cold)Carry out all aspects of M&E/Fabric maintenanceMaintain and update Log booksPlumbing - Unblocking toiletsPumps, motorsCompliance and logbooksChillers and pressurisation unitsUndertake all allocated tasks and perform them in a timely and professional manner.Be proactive in identifying and reporting faults with building services equipment and take steps to resolve them.Be proactive to ensure all H&S issues are reported/escalated as required.Maintain informal communications with Client staff members related to service levels and issues.Report service affecting issues to the site management team for formal communication with the client.Remain flexible with regard to site attendance and tasks undertaken within personal competency.Be fully aware of relevant Health and Safety and general legislative matters.Escort specialist subcontractorsRequirementsElectrically qualified - City & Guilds Level 2&3Must be able to provide copies of your trade certificatesA proven track record in commercial building maintenanceMulti-skilledGood communication skillsClient FacingIf you are interested please send your CV to Ben Miller to CBW staffing solutions....Read more...
Typical day to day duties will include:
Control and arrange the implementation of modifications to existing products
Arrange and monitor the testing of prototype models and modified products
Assist in the development and introduction of new products for the custodial and high security sectors
Provide solutions for product improvement and advise on technical issues relating to the company's products
Generate pre and post-design documentation (circuit diagrams, product designs, etc, where appropriate
Test and repair, where appropriate, returned mechanical, electromechanical, and electronic products. Completion of associated documentation and reports
Liaise with and advise subcontractors and suppliers to assist them with the manufacture of components, sub-assemblies, and assemblies to the required standards
Provide cost estimates for potential projects/customer enquiries
Training:This is a Level 3 Mechatronics apprenticeship, delivered over four years.
The apprentice will attend the training centre, In-Comm Training Services in Aldridge, WS9 8UG, on a full-time basis for the first 10 months. Training Outcome:It is expected that, upon successful completion of the apprenticeship, you will progress into the role of Development Engineer within the HHS Group business unit. This may involve occasional overseas travel and/or site work, primarily at custodial and government premises such as prisons, police stations, secure hospitals, and immigration centres, etc. Employer Description:ASSA ABLOY Limited is a wholly owned subsidiary of ASSA ABLOY, the world's leading manufacturer and supplier of door opening solutions, meeting tough end-user demands for safety, security and convenience.
Every day, we help billions of people move through a safer, more open world with ease. If you’ve ever walked through an automatic door, stayed in a hotel, or gone through passport control, you’ve probably used one of our products or services. From reliable home security to cutting-edge biometric technology for businesses, governments, airports, hospitals, schools and more, we touch every part of every day.
We have operations in over 70 countries and our people know local standards inside-out. They’re specialists in access essentials: like mechanical and digital locks, cylinders, keys, tags, security doors and automated entrances. At the same time, we are creating and embracing new technology – like biometrics, mobile security, and trusted identities. We stay at the forefront, so whatever you need, you’re in safe hands.Working Hours :Monday to Thursday:
Start time - between 7am and 8am.
Finish - between 3:45pm and 4:45.
Friday Finish - between 11:30am and 12:30pm.
Training centre hours are 9.00am to 4.30pm.Skills: Communication skills,IT skills,Attention to detail,Organisation skills,Customer care skills,Problem solving skills,Presentation skills,Administrative skills,Number skills,Analytical skills,Logical,Team working,Creative,Initiative,Non judgemental,Patience,Physical fitness,Interest in Mech. Engineering,Hard working....Read more...
Electrical HVAP Shift Engineer – Panama Shift – Commercial Office – Moorgate, London – Up to £50,000 Per annum My client is looking for an Electrical Shift Maintenance Engineer to be based in a commercial office in Moorgate, London. The successful candidates will be electrically biased (C&G / NVQ) and have a proven track record in commercial building maintenance. Working with the maintenance team on site, He or she will be required to carry out electrical, mechanical and fabric maintenance to the following. In return, the company offers a competitive salary of £50,000, further training and career progression. PackageUp to £50,000 per annumUniform and Tools Provided22 days holidayOvertime AvailablePensionInternal Progression & DevelopmentHours of workPanama Shift – 2 days, 2 off, 3 days on, 2 off, 2 days, 3 off, 2 nights, 2 off, 3 nights, 2 off, 2 nights, 3 off …07:00am - 19:00pm / 19:00am - 07:00amKey Duties & ResponsibilitiesLighting (Small installation, Fault-finding, Lamping, Changing ballast's, Control panel, Power distribution)Emergency lightingAir Conditioning - Air Handling Units / Fan Coil Unit (Filter changes, cleaning)Chillers - Re-setWater Treatment (Temperature checks / Not dosing)Plumbing - Unblocking toiletsPumps, motorsWater TreatmentBMS System - Monitor (i.e. Hot & Colds)Undertake all allocated tasks and perform them in a timely and professional manner.Be proactive in identifying and reporting faults with building services equipment and take steps to resolve them.Be proactive to ensure all H&S issues are reported/escalated as required.Maintain informal communications with Client staff members related to service levels and issues.Report service affecting issued to the site management team for formal communication with the client.Remain flexible with regard to site attendance and tasks undertaken within personal competency.Be fully aware of relevant Health and Safety and general legislative matters.Escort specialist subcontractorsRequirementsElectrically qualified level 3 (C&G, NVQ etc)HVAP18th editionYou must be able to provide copies of your trade certificates (Essential)Must be happy to get DBS clearance A proven track record in commercial building maintenanceMulti-skilledGood communication skillsExcellent customer skills Must be able to get to the site for 07:00 am startIf you are interested please get in contact with Tom Gotts of CBW Staffing solutions....Read more...
Electrical HVAP Shift Engineer – Panama Shift – Commercial Office – Moorgate, London – Up to £50,000 Per annum My client is looking for an Electrical Shift Maintenance Engineer to be based in a commercial office in Moorgate, London. The successful candidates will be electrically biased (C&G / NVQ) and have a proven track record in commercial building maintenance. Working with the maintenance team on site, He or she will be required to carry out electrical, mechanical and fabric maintenance working within a team of 4 working landlord side only. In return, the company offers a competitive salary of £50,000, further training and career progression. PackageUp to £50,000 per annumUniform and Tools Provided22 days holidayOvertime AvailablePensionInternal Progression & Development Hours of workPanama Shift – 2 days, 2 off, 3 days on, 2 off, 2 days, 3 off, 2 nights, 2 off, 3 nights, 2 off, 2 nights, 3 off …07:00am - 19:00pm / 19:00am - 07:00am Key Duties & ResponsibilitiesLighting (Small installation, Fault-finding, Lamping, Changing ballast's, Control panel, Power distribution)Emergency lightingAir Conditioning - Air Handling Units / Fan Coil Unit (Filter changes, cleaning)Chillers - Re-setWater Treatment (Temperature checks / Not dosing)Plumbing - Unblocking toiletsPumps, motorsWater TreatmentBMS System - Monitor (i.e. Hot & Colds)Undertake all allocated tasks and perform them in a timely and professional manner.Be proactive in identifying and reporting faults with building services equipment and take steps to resolve them.Be proactive to ensure all H&S issues are reported/escalated as required.Maintain informal communications with Client staff members related to service levels and issues.Report service affecting issued to the site management team for formal communication with the client.Remain flexible with regard to site attendance and tasks undertaken within personal competency.Be fully aware of relevant Health and Safety and general legislative matters.Escort specialist subcontractorsRequirementsElectrically qualified level 3 (C&G, NVQ etc)HVAP18th editionYou must be able to provide copies of your trade certificates (Essential)Must be happy to get DBS clearance A proven track record in commercial building maintenanceMulti-skilledGood communication skillsExcellent customer skills Must be able to get to the site for 07:00 am startIf you are interested please get in contact with Charlie Long of CBW Staffing solutions....Read more...
The Level 3 Food and Drink Engineering Maintenance apprenticeship programme lasts four years, and combines block release at Kirklees College (Huddersfield), with on the job work experience within the engineering department at Grupo Bim bo UK Ltd (New York Bakery) in Swinton, Mexborough. Grupo Bim bo is the largest Bakery product manufacturer in the world.
If successful at the end of the program you will have the following knowledge, skills and understanding to be a Food and Drink Maintenance Engineer:
Food processing/manufacturing and product knowledge (to meet company requirements e.g., dairy/confectionary/meat processing)
Legislation and regulations in the food and drink industry, including understanding of food safety, health and safety, hazard analysis critical control Point (HACCP), Threat Assessment Critical Control Point (TACCP) and Vulnerability Assessment Critical Control Point (VACCP)
Basic principles of sustainability and environmental legislationThe impact of customer requirements and demands on the food chain
The key principles of cleaning and hygiene processes cover both Cleaning in Place (CIP) and cleaning out of place systems
The key principles of quality management systems and processes
The key principles of Continuous Improvement (CI) ManagementMaterials science, including the key features of raw materials, their own uses in foods production and types of equipment used to process them
Types of best practice maintenance approaches and techniques in the food and drink industry
The principles of fault finding
The operation of mechanical equipment in the food and drink industry
How to produce replacement components
The function of fluid power systems
The operation of heat exchange equipment
The principles of cutting and welding in the food and drink industry
Principles of electrical systems, including their uses, safety, and legislation
Services and utilities knowledge, including the importance and importance of energy management and pollution control in food production
Training:You will study towards a Level 3 Food and Drink Maintenance Engineer Apprenticeship Standard at Kirklees College.
You will achieve a Diploma in Food and Drink Engineering Maintenance.
The college element of this apprenticeship has typically been on “block release”, so there has been the expectation to work and study away from home.
When required, accommodation and travel will be organised, but we need you to have a mature outlook, be mobile, and be “up” for the challenge of managing yourself and your studies when you are away from home at college, and when working at site.
Typical College attendance:
The typical duration of college attendance in previous years is shown below-
Year 1 = 17 weeks, Year 2 = 10 weeks, Year 3 = 16 weeks, Year 4 = 0 weeks
This is a 4-year programme.
The final year will involve completion of a portfolio and preparation for End Point Assessment (EPA). This measures the skills, knowledge and behaviours outlined in the standard and is carried out by ESFA approved organisations independent from the college.Training Outcome:
Following successful completion of the apprenticeship the applicant will be given the opportunity to apply for a shift based, multi skilled engineer
Following further development, possibilities exist in various maintenance supervision and management positions, manufacturing and project management
Employer Description:Ambient food manufacture and largest Bakery product manufacturer in the world.Working Hours :Days and shifts to be confirmed.Skills: Communication skills,Team working,Resilient,Can do attitude,Practical aptitude,Practical approach,Confident self-starter,Ability to work accurately,Safe worker,Accepts responsibility,Proactive,Pride in work,Integrity,Time management....Read more...
As an Apprentice Fabricator/Welder, you'll be initially responsible for (but not limited to) the following:
Carry out fabrication and welding activities including use of a MIG/TIG set, robot welder, various tooling and equipment
Accurately interpret CAD/technical drawings
Ensure correct marking up of component parts
Working to quality standards required for the components
Welding joints in accordance with approved welding procedures and quality requirements (TIG, MIG)
Using a variety of modern equipment to shape, form and cut metal and plastic materials
Undertaking final inspections of finished components
Maintaining a clean, organised and productive work area
Ensure job timings are met/exceeded
You’ll develop your skills with a mentor alongside dedicated Auditoria employees and previous apprentices who are eager to pass on their knowledge. You will learn a variety of duties and support the whole business. You’ll be taught and mentored to achieve your full potential and create the foundation of a career in engineering/manufacturing.
If you are committed and ready to take your first step into a career with a modern and long-standing employer, then please apply now! This apprenticeship and opportunity with Auditoria will be highly competitive, so do not miss your chance!Training:The successful candidates will continue their studies with apprenticeship specialists, RNN Group at their Rotherham campus on a day release format, giving you the training and support you need to become an all-rounded and successful Engineer.
The Apprenticeship Standard you will be studying is Engineering Operative– Fabrication/Welding– Level 2. This will include Functional Skills in English and maths if required.Training Outcome:
Potential further industry and business-appropriate training, including installation and maintenance roles
A lifelong career with Auditoria Services Ltd may be offered to the right candidate
Employer Description:Auditoria Services Ltd are the leading UK seating manufacturers in spectator seating manufacture, design and installation for theatres, cinemas, lecture theatres, sports halls and more.
Auditoria is a family business and was founded in 1977. Their founder was a mechanical engineer and electrician by trade who saw a gap in the market for a seating company that would provide quality seating using local suppliers. Over 40 years later, Auditoria still hold the same values as they did then. They’re also still based in Rotherham and are proud to be a part of the manufacturing heritage of the town.
Auditoria are extremely keen on utilising the apprenticeship scheme to solidify their workforce. They have extremely experienced team members who are excited to engage the next generation of engineers.Working Hours :Monday- Friday
Hours to be confirmedSkills: Communication skills,IT skills,Attention to detail,Organisation skills,Customer care skills,Problem solving skills,Administrative skills,Analytical skills,Logical,Team working,Initiative,Patience,Physical fitness,Work under pressure,Ability to prioritise workload,Good attitude to work....Read more...
We provide global opportunities to develop your career, make your community a better place and work with today’s most innovative thinkers to solve the world’s toughest problems. We believe in flexibility for you to explore your passions while making an impact through meaningful work within our inclusive workforce. That’s what #LifeAtCummins is all about. We are looking for an enthusiastic Apprentice Maintenance Engineer to join our team specializing in Maintenance within our Darlington Engine business. During your apprenticeship with us, you will learn how a major global organization operates, gaining the tools and exposure you will need to become an expert in the industry and power your potential!
In this role, you will make an impact in the following ways:
Learn how to Troubleshoot, assemble, install, test, maintain, and make improvements to mechanical and electrical systems
Thoroughly understand and adhere to the protocols of working safely
Ensure equipment uptime is kept to a maximum to support production throughput and quality
Work with the latest technology including, Robots, Cobots, PLC’s, Vision Systems and Automated Delivery Systems
Understand Machine safety and safety standards, Puwer Regs
Delivery of improvement projects to enhance department performance
Work in a diverse team towards making Darlington the best Powertrain Campus globally
To be successful in this role you will need the following:
Minimum of 5 GCSEs at Grades 9 to 4 (Grades A* to C) including mathematics, English Language and one Science or Engineering subject
Minimum of 96 UCAS points at Level 3 must include Mathematics. other STEM subjects preferred are Engineering, Chemistry, Biology, Physics or Science but not mandatory
Other Level 3 STEM qualifications may be considered
Vocational equivalents at level 3 or higher will also be considered as equivalent to UCAS points
Functional Skills Level 2 will also be considered as equivalent to GCSE Grade 4 (Grade C). Other equivalent qualifications may be considered
Training:
Electrical or Electronic Technical Support Engineer (Degree) Apprenticeship Standard
Training Outcome:
Possibility of a potential permanent employment through open vacancies
Employer Description:Cummins Turbo Technologies is the only manufacturer focused solely on medium- to heavy-duty diesel engine turbo technologies. For more than 60 years, we have delivered innovative, reliable turbocharger solutions for our customers. Our vision for turbocharger solutions, thanks to our rich company heritage derived from our Holset® brand, sets us apart as a technology leader.Working Hours :Monday - Thursday, 8.00am 4.30pm and Friday 8.00am - 1.30pm, 4 days per week within the plant and 1 day a week at Teesside UniversitySkills: Communication skills,IT skills,Attention to detail,Organisation skills,Customer care skills,Problem solving skills,Presentation skills,Number skills,Analytical skills,Team working,Initiative....Read more...
Senior Shift Engineer - Client Direct - (Days & Nights) - Corporate Office - Fixed Term Contract - London - £61,300 + BonusExciting opportunity to work In House / Client Direct Company in London. My client is looking for a Senior Shift Engineer to be based in a critical / commercial building in London (City / Liverpool Street). The successful candidates will be electrically OR mechanically biased (C&G / NVQ) with a proven track record in commercial building maintenance, ideally within a critical site (i.e. Bank, Data centre, Blue chip office etc). Working with the maintenance team on site, he or she will have experience leading a team and be required to carry out mechanical, electrical and fabric maintenance to the following. In return the company are offering a competitive salary of £61,300, further training and career progression.Ensure that Planned Preventative Maintenance & Reactive maintenance is carried out to all client assets through operation of Planned Preventative Maintenance System.Manage the shift team.Deal with hands-on work when needed.Ensure that plant faults and defects are swiftly remedied to maintain the plant in serviceable order at all times.Carry out routine quality checks on workforce activities, record keeping and general housekeeping.Ensure that suitable spares are available to carry out maintenance of the above plant.Ensure that comprehensive maintenance records are completed in the form of job sheets.Ensure that Method Statements and Risk Assessments are prepared, reviewed and utilized for all tasks (PPM and reactive) carried out to ensure safe working practices.Hours of workContinental shift pattern07:00am to 19:00pm & 19:00pm to 07:00amPackage£53,700 Basic Salary + £7,600 shift allowance 7.5% Pension (Employer Contribution) 26 shift days holidayMedical InsuranceDental PlanUniform and Tools ProvidedSeason Ticket LoanOvertimeCycle to work schemeChildcare vouchersTravel insurance Health checks Life insurance (£120,000)Overtime AvailableA lot of progression availableAnnual pay reviewRequirementsElectrically OR Mechanically qualified Level 3 / HNC / HNDYou must be able to provide copies of your trade certificates (Essential)Ability to lead a team of engineersA proven track record in commercial building maintenanceAn understanding of critical plant: Chillers, HVAC, UPS systems, Cooling Towers etcExcellent customer skills Must be able to get to site for 07:00am start (On day shift)Highly desirable (Not essential)Any further qualifications (i.e. Electrical or Air Conditioning etc)Experience working in a bank / data centre / commercial OfficeHigh Voltage - Experience / Qualification - Current or expiredPrevious experience a day and night shift pattern....Read more...
Fit Out Engineer (FTC) - Client Direct - Days - Brand New Commercial Office - City of London- £55,000 + BonusExciting opportunity to work In House / Client Direct Company in City of London . My client is looking for a Fit Out Engineer to be based in a brand new commercial building in City of London on a fixed term basis until at least August 2026. The successful candidates will be electrically or mechanically qualified (C&G / NVQ) with a proven track record in commercial building fit outs, ideally within a critical site (i.e. Bank, Data centre, Blue chip office etc). Working with the fit out team and Supervisor on site, he or she will have experience carrying out electrical, mechanical, plumbing, HVAC installations. In return the company are offering a competitive salary of £55,000.Review and monitor access into landlord areas and plantrooms.Deputise for the Fit-out Supervisor in their absence. Attend fit-out meetings and coordinate with fit out coordinator and M&E consultants.Monitor the tenant’s fit-out project, identifying any potential impacts to the base build infrastructure.Undertake tasks as directed by the Fit-out Supervisor, ensuring all work is carried out to required codes of practices and standards.Verify commissioning and any integrations to base build systems, ensuring systems and O&M are updated.Ensure the CAFM system is updated with sufficient information following any reactive tasks.Carry out fault finding, diagnostics, and rectification on HVAC systems, escalating where necessary.Maintain effective communication with the Fit-out Supervisor, shift and engineering management team including plant status, isolations, ongoing work, and standards of housekeeping. Plant areas, workshops, stores, and changing areas are kept to the highest standards Supervision and monitoring of contractors carrying out work for Brookfield Properties and or fit out contractors.Always uphold the integrity of the company and ensure the provision of high levels of customer services are provided.Ensure the accurate and timely completion of logbooks on completion of any related activities.Escalate any defects and incidents immediately to engineering management.Complete any assigned mandatory training courses.Complete any site-specific system training as directed by your line manager.Complete relevant Competent Persons Assessment within relevant discipline, within the agreed timeframe.Ensure any parts required are clearly and accurately stated and any difficulties encountered on engineering activities are reported to the Engineering Management team.Act as site Competent Person when on duty, in accordance with the Company Safety Rules and Procedures.Hours of workMonday to Friday08:30 - 17:30Package£55,000 salary + bonus25 days annual leave + bank holidaysEmployer Pension Contribution of 7.5%BUPA Private Medical and Dental – with family upgrade availableEAPHealth Assessments every 2 yearsLife Assurance – 4x times salaryIncome ProtectionCritical Illness InsuranceTravel InsuranceWill WritingAnnual Eyesight tests and flu vaccinationsEnhanced family leave paysponsorship for professional /educational studiesindustry leading training schemeDiscounts and cash backs across retail, travel, entertainment etc. RequirementsElectrically or Mechanically qualified Level 3 / HNC / HND18th Edition if electrically qualified Review contractor and tenant RAMS and monitor permits to work.IOSH Managing SafelyAt least two years experience in a similar role in a corporate environmentProficient in the use of CAFM systems to complete reactive work orders.Proficiency in MS Office (Word, Excel, PowerPoint). Analytical mindset, able to interpret data to drive continuous improvement and service efficiency. Initiative to suggest and develop new ideas to increase efficiency and cost savings. Ability to prioritise tasks to meet deadlines. Strong communication skills and the ability to deal with staff at all levels. Reliable and conscientious. A strong team ethos and willingness to help out in all situationsExperience of working in engineering teams and or fit out teams.Highly desirable (Not essential)Experience of system modifications and minor installations. Project supervision of M&E fit-outs. Awareness of the Tenant and landlord relationship within multi-occupied properties.Understanding of energy management systems and energy reduction initiatives. PASMA and IPAF qualifications. First aid training.Authorised Person in Electrical or Mechanical discipline. If you are interested please get in contact with Fin Havering of CBW Staffing solutions....Read more...
JOB DESCRIPTION
Tremco Construction Products Group brings together Tremco CPG Inc.'s Commercial Sealants & Waterproofing and Roofing & Building Maintenance divisions; Tremco Barrier Solutions Inc.; Dryvit, Nudura and Willseal brands; Prebuck LLC; Weatherproofing Technologies, Inc.; Weatherproofing Technologies Canada and PureAir Control Services, Inc. Altogether, Tremco CPG companies operate 21 manufacturing facilities, 6 distribution sites, and 3 R&D/technology sites, and employ more than 2,700 people across North America.
GENERAL PURPOSE OF THE JOB: The Engineer's role is viewed as an extension of management. Responsibilities are broad and include safety, product quality, process control, productivity improvement, and development of a LEAN culture. The Engineer is expected to spend a significant amount of time on the floor.
ESSENTIAL DUTIES & RESPONSIBILITIES:
Safety Assume a leadership position at the facility in partnership with the shift supervisors. Activities include resolution and communication regarding safety issues. Execute on scheduled PHA's and JSA's. Proactively monitor area and remediate potential safety issues. Use DAKOTA software as a tool for compliance and environmental, health and safety. Use the tool to report incidents, near misses, and non-conformances.
LEAN Culture Develop and execute upon "standard work" activities. Assume responsibility for assigned activities on the Engineering Tier and other accountability boards. Conduct "GEMBA Walks" daily. Use walks as the primary means of education and communication of expectations. Improve productivity through elimination of non-value-added activities. Apply Engineering principles and methodologies to Improve productivity and eliminate waste.
Product Quality Work to maximize equipment efficiency and quality for output. Member of the facility QIC. Ensure identification of root cause and subsequent prevention of future customer complaints. Assist in the training of operators with a focus on quality critical product specifications and process parameters. Capable of equipment troubleshooting and process design.
EDUCATION:
Bachelor's degree from four or 5-year college or university. B.S. in Mechanical, Chemical, Electrical or Controls Engineering.
EXPERIENCE:
Six months to one year related experience and/or training. Bachelor's Degree (B.S.) in Chemical Engineering, Mechanical Engineering, Electrical or Controls Engineering from an ABET Accredited university. Relevant experience from internship is acceptable for experience. CERTIFICATES, LICENSES, REGISTRATIONS: Six Sigma Green Belt is a plus. OTHER SKILLS AND ABILITIES:
Understanding process variance and the resultant effects on Quality. Knowledge of applied statistics. Ability to perform problem analysis utilizing problem-solving methodology. BENEFITS:
Tremco offers a variety of benefits to its employees, including but not limited to health insurance, paid holidays, paid time off, 401(k) with company match, Company Pension Plan, Performance Based Bonus/Commission, and continuing education.
All qualified applicants will receive consideration for employment without regard to their race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or veteran status.Apply for this ad Online!....Read more...
We are seeking a Senior Process Safety Consultant to join a leading engineering consultancy, delivering complex safety projects across high-hazard industries including chemical, pharmaceutical, oil & gas, clean energy and nuclear. This is a hybrid, days-based permanent role based in the Greater Manchester Region, offering up to £65,000 per annum DOE, plus a comprehensive benefits package.This role blends technical project delivery with client leadership. You will manage safety and risk projects from concept through to completion, ensuring high-quality outputs, budget alignment, and compliance with UK safety regulations. Your expertise will support clients through regulatory frameworks such as COMAH, ALARP, and functional safety standards.As a Senior Process Safety Consultant, you will also mentor junior team members, lead multidisciplinary delivery teams, and contribute to the growth and development of the safety function through both technical excellence and trusted advisory support.Senior Process Safety Consultant Responsibilities:
Lead and deliver safety and risk projects across a variety of sectors.
Facilitate hazard studies including HAZID, HAZOP, LOPA, ALARP, OBRA, and FMEA.
Produce COMAH Safety Reports and conduct formal assessments such as QRA and consequence modelling.
Lead development and improvement of PS management systems.
Deliver functional safety and machinery safety project scopes.
Provide technical guidance and mentorship to junior consultants.
Oversee and coordinate multidisciplinary project teams.
Support business development through client engagement and identification of new opportunities.
Senior Process Safety Consultant Requirements:
Strong technical capability in safety techniques (e.g., HAZOP, QRA, ALARP, LOPA, OBRA)
Chartered Engineer with a degree in Chemical, Mechanical, or Control/Electrical Engineering
Excellent communication and technical report writing skills
Proven ability to lead and manage project teams
In-depth knowledge of UK safety legislation and major accident hazard regulations
Eligible for UK security clearance (due to the nature of some work)
Please apply direct or contact Sean Turner at E3R for further information regarding this Senior Process Safety Consultant opportunity.....Read more...
The Engineering Manager opening is working Days Monday to Friday in the Wigan area of Manchester, providing the opportunity to be able to progress within a market leading manufacturing company. The company and site is part of a market-leading international manufacturing organisation, with an impressive background of investing in and developing employees at all levels of their business, providing extensive training and personal development opportunities.What’s in it for you as a Engineering Manager:
Basic salary of upto £56,000 per annum
15% Annual KPI Bonus
Family private Health Care
8% Company Pension
3x Life assurance on salary
Location - Wigan
Certified Training opportunities
Monday - Friday DAYS based
Excellent employee benefits program, employee benefits program, discount card for supermarkets etc
Duties of Engineering Manager:
The development of maintenance plans and systems, driving PPMs
Undertaking improvement projects as part of the maintenance team
The leadership and development of a small team of engineers
Responsible for subcontractor management and safety
Responsible for identifying and eliminating recurring plant issues through engineering improvements
Hands on/Hands off mix
Experience and Qualifications Required for Engineering Manager:
Engineering qualified City & Guilds, ONC, NVQ 3 or equivalent qualification in either Mechanical Engineering or Electrical Engineering
Experience managing large CAPEX and Investment Budgets
Previous experience as a Maintenance Team Leader, Maintenance Manager, Maintenance Supervisor, Engineering Manager, Maintenance Planner, Lead Engineer etc
Previous experience of undertaking maintenance within a manufacturing environment
IOSH or NEBOSH Trained
Previous experience of the development and application of PPM and TPM activities
This position would suit a Maintenance Manager, Maintenance Team Leader, Engineering Manager,Maintenance Supervisor....Read more...
Embedded Software Consultant – Defence – Cambridge
A growing and technologically intriguing Defence company, based in Cambridge, is seeking experienced Embedded Software Consultants or Engineers to assist in the development of newly invented technologies that will enhance the defence and safety of the UK.
Your Embedded Software experience should be specifically in Embedded C. Ideally, you will have experience in the Defence sector; however, we are open to candidates from other complex sectors. It will be essential that you could obtain security clearance.
Knowledge of prototyping, using C, C++, MATLAB, or another software language will be highly advantageous.
It is expected that you hold a degree in a software or electronics field, or another field that would have led you into an Embedded Software Engineer role.
We are open to candidates at various levels of experience, ranging from those with a year or two of industry experience to more senior roles. The level of responsibility will depend on your level of experience and skills.
You will be working in a multi-discipline division, including mechanical engineers, software engineers, electronics engineers, physicists, and other industry professionals with whom you will be collaborate and learn from.
Due to the expansion of this team, it is an exciting time to join and will result in career growth and opportunities that arise from the company’s natural growth.
If you want to work on complex, industry-defining technologies while being offered an excellent starting salary, salary reviews, bonus, a pension, free lunches, and other outstanding benefits, I recommend submitting an application now to avoid missing out.
For more general information, please feel free to call Andrew Welsh, Director of Medical Devices Recruitment and Scientific Recruitment Specialists Newton Colmore, on 0121 268 2240 or make an application and one of our team at Newton Colmore will contact you. Please note we will not be able to discuss the role specifics until we have a copy of your CV.....Read more...
Lift fabrication
Lift installation and commissioning
Lift servicing and fault-finding
Read and apply CAD drawings
Diagnose engineering problems and find solutions
Learning from our experienced engineering team
Gain confidence in a supported work environment, whilst gaining your engineering skills and qualifications
Join a dynamic and fun team
Training:Work-based training is at Sesame Access Systems Ltd, Unit 1, Cumberland Works, Wintersells Business Park, Byfleet, Surrey KT147LF.
80% work-based training + 20% university training.
1 day a week in the workshop is spent on university work.
You will follow a training programme, delivered by Sesame's Head Engineer and Sesame colleagues. Both on the job on site and workshop-based. Training Outcome:At the end of the 5 years, you will have a BEng (Hons) Degree in Electro-mechanical Engineering. We hope you will stay with Sesame, or you may decide to travel or experience other engineering companies. However, we really hope you return to Sesame. Employer Description:Your employer will be Sesame Access Systems Ltd. Sesame designs, builds, installs and services bespoke wheelchair access lifts, across the planet. www.sesameaccess.com
Our Clients include Sydney Opera House, Bank of England and Qatar National Library.
You will receive on the job training from our very knowledgeable Sesame Engineers, one of whom will also be your professional Mentor. Training will cover all aspects of Sesame lifts, including hydraulics, electrics, design, manufacture, fault finding, individual workplace projects, materials and manufacture, statics and dynamics, drive systems, hysteresis, thermodynamics, electrical control systems, computer aided design (CAD), understanding drawings etc. Your work based experience will compliment your studies.Working Hours :Monday to Friday between 7am to 4pm. Overtime opportunities on Saturdays.Skills: Communication skills,Attention to detail,Organisation skills,Customer care skills,Problem solving skills,Analytical skills,Logical,Team working,Creative,Initiative,Non judgemental,Patience,Physical fitness....Read more...
As an apprentice to Hayward Tyler, you will be trained to become a skilled Engineering Fitter with training in core areas such as, interpreting drawings/specifications for required components or assemblies, refurbishing/fault finding and problem solving, using various tooling & equipment, quality checking/testing and calibration of units/components.
The Engineering Fitter Apprenticeship is aimed at people who wish to gain real engineering qualifications as well as practical on the job skills. This is achieved through a combination training/tuition and work-based learning activities.
Please note, whilst not confirmed, the training provider for this apprenticeship may be based in Northampton and applicants will need to be able to get to this location on a weekly basis.Training:Engineering Fitter Level 3 Apprenticeship Standard:
The 4 Year Apprenticeship programme is structured in partnership with the college and is organised as follows:
Year one:
Gaining skills in understanding, reading engineering drawings, basic assembly and dismantlement, hand tools/techniques and measuring equipment
Year Two:
Specific training in core areas to develop skills such as planning work activity, resources, equipment and tooling
Year Three:
Developing your workshop skills using more focused techniques
Year Four:
Working towards being a skilled Fitter and improving competence in a chosen speciality
Training Outcome:
We have a track record of nurturing the skills and talents of our apprentices
The invaluable skills and qualifications you'll gain throughout our apprenticeship program will open doors to various roles within the company, such as Mechanical Fitter, and pave the way for career advancement to positions like Production Engineer
Employer Description:We are a pump and motor manufacturer based in Luton.Working Hours :Monday - Friday. Shifts to be confirmed.Skills: Problem solving skills,Logical,Team working....Read more...
Adherence to all Health & Safety procedures, working in a safe and efficient manner
Loading and unloading of goods from vehicles
Checking and receipt of goods delivered, recording and distribution of products to the correct location for put-away
Packing, picking and labelling of stock for final delivery
Printing delivery notes and organising for delivery runs
Compliance with company procedures with the use of mechanical handling equipment, carrying out safety checks regularly
Using company warehouse management system correctly, following all procedures regarding picking, booking deliveries in, stock management
Corresponding with internal departments when necessary
Assisting with stock taking
Liaising with suppliers, if necessary
Keeping warehouse/yard area clean and tidy
Utilising Exchequer system to assist with correct stock management
Portraying professional demeaner
Undertaking other duties to meet the needs of the business
Training:
Supply Chain Warehouse Operative level 2
End Point Assessment
Work Based Training
Monthly Tutor Sessions
Functional Skills Training (if necessary)
Training Outcome:Progression is initially available within the warehouse team, with potential for further progression depending on performance.Employer Description:Premier Contract Supplies was set up in 1998 by Vince Caldicott, a former heating engineer who owned Premier Heating Supplies - a company selling heating supplies and bathrooms to the public.
Whilst running PHS he saw that there was a gap within the contract market for a high quality sanitary ware supplier, and Premier Contract Supplies was born. We started with a small team based in Frimley, with a warehouse unit of 2,000 sq ft. Within three years the company had purchased the property at Farnborough – our current head office – and acquired 18,000 sq ft of warehouse space.Working Hours :Monday - Friday, 9.00am - 5.00pm.Skills: Communication skills,Number skills,Logical,Initiative,Physical fitness....Read more...
Considered doing something out of the ordinary? Take the plunge into an exhilarating world that really makes a difference to people's lives with an engineering apprenticeship at Asymchem.
A springboard for your career, our engineering apprenticeships enable you to study for nationally recognised qualifications, while gaining invaluable on-the-job experience and skills.
What's more, you'll immediately start earning a salary and many of the benefits enjoyed by all our employees.
This four-year multi-skilled course will expose you to the engineering disciplines of Mechanical, Electrical and Control & Instrumentation.
You'll learn core skills in your preliminary year, after which you'll experience first-hand what it's like to work directly with the engineering teams who support our cutting-edge pharmaceutical environment.
Types of mechanical, electrical, electronic and instrumentation engineering work carried out on our production equipment and building services include:
Planned Maintenance:
Inspection
Predictive e.g. vibration analysis, thermography and ultrasonic techniques
Preventative
Calibration
Corrective Maintenance:
Breakdowns
Repairs
Fault diagnosis
Projects:
Planning
Continuous improvements
BTEC & HNC training project
Commissioning
You will also have specific training both onsite and at relevant centres to allow you to do your job. These may include:
Safety (SSoW)
Working at heights (ladders. towers and MEWP's)
Isolation (LOTO)
Electrical Regulations (IEE)
Manual Handling
Risk Assessment
DSEAR (Hazardous areas)
Welding
Machining
PLC's
Instrumentation
The position of Maintenance Engineer involves providing essential support to ensure consistent operation and regulatory compliance of pharmaceutical equipment and utility supply services.
Responsibilities include installing, managing and maintaining hazardous and non-hazardous area equipment used to power and control engineering systems, machinery and processes, documenting task completion, diagnosing & repairing equipment breakdowns, coordinating vendor repair efforts, and supporting Building Energy Management Systems to ensure efficient control and operation of facility equipment.
The Engineering team at Sandwich play a vital role in drug R&D and manufacturing operations by ensuring workplaces, manufacturing equipment and building services are available and continually improved; this supports our mission to drive smarter, greener, and more cost-effective manufacturing to support clinical research and commercialisation.
Our apprentices contribute fully to this aspiration through the work they conduct in the Asymchem workplace. We believe our most precious resource is our people. We want to unleash the power of our people. This drives our desire to invest in, develop and stretch all our apprentices. You will be encouraged and supported to seek opportunities beyond the apprenticeship qualification. In the later years of the apprenticeship, you will take ownership of improvement projects, contributing in the same way as all of our team members.
We recognise the passion, knowledge and diversity that talented people bring to Asymchem, so we are dedicated to ensuring that we provide equal opportunities to our apprentices.
We will help you grow and thrive during your apprenticeship, ensuring you emerge as a confident and talented Engineer at the end of your four years with us.Training:This Level 3 Apprenticeship Standard in Maintenance and Operations Engineering Technician can be flexible depending on the training plan designed by the employer and provider; however, it will need to meet the requirements of the End Point Assessment.
Typically, in the first year, the apprentice will attend four days in a week completing practical skills within the IPS Rochester workshop (Performing Engineering Operations). They will also attend one day a week studying the Technical Certificate
In year two the apprentice moves to day-release and will attend the Training Centre one day a week to continue the Technical Certificate, whilst working at the employer's site in the remaining 4 days.
Starting in year 2, and continuing until they are ready for the End Point Assessment in year 4, the apprentice will receive regular training contact with IPS and their assigned Trainer
Training Outcome:Asymchem Ltd are keen to progress their Apprentices to HNC Level in years 3 & 4 depending on results from the BTEC National Diploma, also and if available, to further positions within the organisation.
Should there be relevant positions available at the completion of the Apprenticeship, then the successful applicants will be invited to apply for the vacancies.Employer Description:As the specialists in skills for science and technology, our purpose is to make sure your business; your people and our industry are future ready.
We are a not-for-profit charitable organisation with a family of commercially focused companies committed to supporting the skills, needs and ambitions across the UK science and technology sector.Working Hours :Monday to Friday, between 8am – 4.10pm. Lunch break 12pm - 12.45pm.Skills: Communication skills,Attention to detail,Organisation skills,Problem solving skills,Analytical skills,Logical,Team working....Read more...
Recruit4staff are proud to be working with our client, a leading Building Services company, in their search for a Technical QA Manager to work from their Head Office in Bromborough, working across multiple projects UK wide, with regular lodging away.For the successful Technical QA Manager our client is offering:
Basic salary of up to £55,000 per annum (Negotiable depending on experience)Working hours: 40 per week, Mon- Thurs 8:30-17:00 and Fri 8:30-16:30Company PensionDiscretionary Company BonusCar Allowance24 days Holiday + bank holidaysPermanent Role
The Role - Technical QA Manager:
Working on high rise residential MEP projects for commercial customers across the UKSupervise the project delivery / QA of our in-house and sub-contract site teams, and act as the day-to-day co-ordination contact between our site teams, other trades, the office, and as required also the client/main contractor.Keep the contract management team informed of progress, changes, and foreseeable issues etcEnsure all works are compliant and installed to specification and the appropriate British/European Standards as applicable.Ensure that all contract deliverables are met, including ensuring all QA records and handover packs are complete and any agreed milestones are achieved.Ensure team focus on key points of failure and ensure risks are eliminated/mitigated. For this role, this means a particular focus on: regulatory compliance, escape of water risks, fire/life safety efficacy risks, agreed programme, and contract deliverables. Co-ordinate (and as required undertake) site quality inspection works, verify, and sign-off completed inspectionsContribute to the team as required in respect of production of technical, programme, and QA project updates and site progress meetings.Ensure personnel are suitably trained for the tasks and equipment they are using to install. E.g. Proper use of crimps etc. Perform periodic checks to ensure such technical training / good practices are being followed.Ensure materials and equipment are suitably selected, received, protected/used, and site logistics/methods suitably planned to ensure quality is not compromised at any stage. Ensure equipment is calibrated when this is required for proper use.Ensure all relevant procedures are followed, maintain site records, and assist with site auditing requirements.To stand in for Site Supervisors on an as/when basis when required to do so on site.Ensure all installations are completed in accordance with the latest drawing/specification revisions and relevant standards.Plan for and ensure ITP requirements are met and relevant notices are raised at the appropriate time, and stage sign offs are achieved as applicable.Provide post-completion defects/aftersales/call-out response support as may be required from time to time. This may include hands on work troubleshooting and solving issues, as well as resourcing and organising/supervising any remedial/repair/PPM works.Ensure NCR processes are followed, actions closed out, and lessons learnt are appropriately shared.
What we are looking for in the successful Technical QA Manager
Relevant Trade background or previous experience in similar role - ESSENTIALTime served experienced City & Guilds qualified Engineer with minimum relevant NVQ3 (or equivalent) in relevant discipline. - ESSENTIALProven track record of MEP on site supervision experience as non-working supervisor on fast pace high rise residential / student / BTR projects. - ESSENTIALSolid experience in running teams on site including new build and refurbishment site works planning/co-ordination, and driving programme on fast paced sites. - ESSENTIALPractical time-served hands-on competence in mechanical installation, commissioning, trouble-shooting, and sub-contractor management. - ESSENTIALStrong knowledge of common MEP points of failure and key risks, failure prevention/mitigation strategies, and acute awareness of the importance of timeliness and thoroughness of QA processes - in step with the build sequence. - ESSENTIALExperienced in ISO-9001:2015/ ISO-45001:2015 / ISO-14001:2018 quality management processes. - ESSENTIALSSSTS/SMSTS or equivalent - BENEFICIALPASMA, MEWP, Asbestos (non-licenced), First Aid at Work, Unvented HW, Scaffold Inspection - BENEFICIALWorking knowledge of Procore software - BENEFICIALFull Driving Licence - ESSENTIALAbility to work both as part of a team and independently.Good Man Management skills.Good communication skills, both written and verbal.Good knowledge of Microsoft Office, Excel and Project.
Key skills or similar Job titles: Technical QA Manager, Quality Assurance Engineer, Building Services Engineer, Building Services Manager, Technical Services Manager, Quality Manager, Quality EngineerCommutable From: Chester, Liverpool, Ellesmere Port, Bromborough, Wirral, Deeside, Wrexham, Widnes, RuncornFor further information about this and other positions please apply now This vacancy is being advertised on behalf of Recruit4staff (NW) who are operating as a recruitment agency, agent, agencies, employment agency or employment business.....Read more...
Expectations at Company, Site and College. Learn, Develop and ensure standards of HSE, food safety at all times. Follow all H&S and Environmental procedures and regulations
Maintain professional attitude, timekeeping and standards all times as a representative of SD Guthrie
Ensure all training requirements are met and successfully complete training, assessments, assignments set
Take part in continuous improvement initiatives within the engineering department
Carry out routine maintenance inspections
Apply technical and academic skills
Fault finding diagnostics on mechanical, electrical and control systems
Participate in project work, upgrades and new equipment installation
Maintain accurate records of work completed
Communicate effectively with colleagues, Supervisors and external providers
Training:Food and Drink Maintenance Engineer Level 3 Apprenticeship Standard:
1st yr block release 24 weeks at NWTC
2nd /3rd yr a mixture of shorter blocks 12 weeks
Most of your time will be spent at the employer being trained and assessed in your workplace
The company and our Technical Training Assessor will support your time of learning offering guidance throughout
We monitor your Apprenticeship to ensure you achieve mandatory requirements core skills knowledge and occupational behaviours in preparation for your end point assessment.Training Outcome:
At the end of the apprenticeship, candidates will be suitably trained and continue their employment in a suitable role where available
Potential continuation of education and academic studies i.e. HNC
Continued professional development
Further in-house and external training and development available
Employer Description:SD Guthrie International is the world's leading producer of certified sustainable palm oil, and the Liverpool site is Europe's first dedicated sustainable palm oil refinery. SD Guthrie International Liverpool Refinery offer a range of high quality, sustainable performance vegetable oil and fat ingredients in bulk or packed.Working Hours :Monday - Friday, 08:00 - 16:00 including a 30-minute unpaid break each day.Skills: Communication skills,IT skills,Attention to detail,Organisation skills,Customer care skills,Problem solving skills,Analytical skills,Logical,Team working,Initiative,Patience,Physical fitness,Strong focus on H&S,Good time management,Motivated....Read more...
