Electrical Mobile Engineer – FM Service Provider - Commercial Buildings – City of London – £40,000 + PackageCBW Staffing Solutions is currently recruiting for a Mobile Engineer to carry out planned and reactive commercial maintenance across a commercial contract with sites around London. The successful candidate will have an understanding of facilities maintenance and a proven track record in commercial building maintenance. This position would be ideal for an Electrical Mobile Engineer currently in a similar position. In return, the company are offering a salary of £40,000 with a potential route into further career progression. In return, my client is offering a very competitive package including:A basic salary of £40,000Plenty of overtime 25 days holiday + Bank HolidaysVan & Fuel CardCall out 1 in 4Company Pension SchemeExcellent career progression opportunitiesHours of workMonday- Friday 08:00-17:00Key Duties & ResponsibilitiesLighting (Small installation, Fault-finding, Lamping, etc)Emergency lighting testsControl PanelsChanging BallastBMS System - Monitor (i.e. Hot & cold)Carry out all aspects of M&E/Fabric maintenanceMaintain and update Log booksPlumbing - Unblocking toiletsCompliance and logbooksCAFM systems (elogs and Webquote used onsite)Undertake all allocated tasks and perform them in a timely and professional manner.Be proactive in identifying and reporting faults with building services equipment and take steps to resolve them.Be proactive to ensure all H&S issues are reported/escalated as required.Maintain informal communications with Client staff members related to service levels and issues.Report service affecting issued to the site management team for formal communication with the client.Remain flexible with regard to site attendance and tasks undertaken within personal competency.Be fully aware of relevant Health and Safety and general legislative matters.RequirementsA proven track record in commercial building maintenanceMulti-skilledGood communication skillsClient FacingIn-depth knowledge of electrical and mechanical principles and systemsPrevious experience of performing a Building Services Engineer roleMust be able to work unsupervised to a high qualityRelevant qualification in electrical or mechanical engineeringPlease send your CV to Alex Denton of CBW Staffing Solutions to avoid missing out on the role !....Read more...
Mobile Commercial Gas Engineer - North West - Global Facilities Management Organisation: Blue Chip Commercial & Real EstateAre you an experienced Commercial Gas Engineer, looking for a mobile role? If so this may be the position for you!CBW Staffing Solutions have a fantastic opportunity for a Commercial Gas Engineer to join a leading facilities management organisation, on a permanent basis.This role will predominantly be covering Manchester and the North West area.Package:Competitive salary between £45,000 - £47,000 per annum (depending on experience)Van & fuel card supplied (personal use is permitted)FULL travel time paidCore hours are Monday - Friday (40 hours per week), Overtime rate Mon - Fri 1.33x Standard Rate & Sat - Sun 1.66x Standard RateParticipation in an ‘out of hours’ on call rota (to be confirmed)25 days annual leave plus bank holidaysGenerous workplace pension schemeAccess to online benefits portal, 4x death in service, offer of opting into private healthcare, annual performance related bonus, sliding scale of sick pay up to a maximum of 65 days a year after 6 years of serviceTraining, development & progression opportunitiesResponsibilities:Servicing and maintenance of a variety of commercial gas appliances and systems, including boilers, heaters, and pipeworkPerform routine inspections and safety checks to ensure gas systems are operating efficiently and in compliance with industry standardsDiagnose and repair mechanical and electrical faults in gas appliances, ensuring minimal downtime and maximum safetyConduct gas leak tests and carbon monoxide checks to identify and mitigate potential hazardsCollaborate with other maintenance personnel and contractors to coordinate complex repairs and system upgradesAdhere to safety protocols and regulatory requirements to promote a safe working environmentQualifications:Proven experience as a Commercial Gas Engineer or similar role within the facilities management industryGas Safe Register certification and relevant qualifications (e.g. ACS, COCN1, CODNCO1)Full UK driving licenceStrong knowledge of commercial gas appliances, systems, and regulationsProficiency in diagnosing and troubleshooting mechanical and electrical faultsExcellent problem-solving skills and attention to detailAbility to work independently and as part of a teamEffective communication and customer service skillsInterested? Apply with a full & up to date CV or call Aaron Rutter at CBW Staffing Solutions.....Read more...
An exciting opportunity has arisen for a Roller Shutter - Industrial Door Engineer to join an independent Roller Shutter, Industrial Door, and Door specialist based in the South East. This permanent role offers excellent benefits, competitive salary and the opportunity for an immediate start.
Our client install, repair, and maintain various types of rolling shutters, industrial doors, shop front doors, as well as automatic and manual aluminium entrance doors with access control systems. Their clients vary, from commercial, High Street retail, schools, hospitals, industrial, manufacturing, etc.
As a Roller Shutter - Industrial Door Engineer, working from both their Romford office in Essex and from home, your work will be scheduled and allocated centrally through their offices, where you will be responsible for Installations, fault finding/repairing and maintenance of a wide range of roller shutters, industrial doors & manual doors of all types.
What we are looking for:
? Previously worked as an Industrial Door Engineer, Roller shutter Engineer, Door Engineer, Service Engineer, Service Technician, Door fitter or in a similar role.
? Essential requirement of previous Field Service experience within this industry.
? Advantageous to have experience with automatic door and door entry systems.
? Good knowledge and experience working with various types of industrial doors.
? Proficient in Mechanical Engineering and Electrical skills.
? Must be able to pass a CRB check for security clearance.
? Possession of a CSCS Card.
Whats on offer:
? Excellent Earning potential - Weekly Bonus & Overtime
? Company vehicle, Company Phone, Training and Progression
You must have a history within the Roller Shutter/Industrial Door industry to apply for this position.
Important Information: We endeavour to process your personal data in a fair and transparent manner. In applying for this role, Additional Resources will be acting in your best interest and ma....Read more...
Job Title Agricultural Engineer
Salary - £35000 - £45000 (Flexible DOE)
Hours Monday to Friday, Day Shift Overtime Available
Location Salisbury
I am currently working with an established Agricultural company who have an exciting opportunity for an experienced Agricultural Engineer to work at their depot in Salisbury. The Agricultural Engineer role will mainly be servicing and maintaining farm equipment. You will be responsible for making sure machinery and equipment run smoothly and provide excellent customer service thereby maximising customer retention. The role will be based from the depot but will also require call outs for any breakdowns etc.
Agricultural Engineer Main Responsibilities
This role includes the following key priorities:
- Servicing and repairing machinery and equipment, either in the workshop or during field visits.
- Fixing faults or installing replacement parts.
- Compliance with manufacturers service and warranty procedures.
- Account for all hours worked using timesheet or scanner, as applicable.
- Keep the Management informed of progress.
- Maintain work area and company vehicle in a safe, tidy, and professional manner, necessary to enhance productivity and efficiency.
- Employees must act in accordance with the company Health & Safety Policy, Risk Assessments and Safe Working Practices.
Agricultural Engineer Personal Specification
- Good mechanical knowledge of any vehicle or machinery would be ideal and experience in the agricultural sector would be a bonus but not essential as full training is available.
- Good problem-solving skills.
- The ability to work on your own or as part of a team.
- An awareness of health and safety.
- A full drivers licence is essential.
If you want to hear more about this Agricultural Engineer role, please send us your CV by clicking apply now or by contacting David Hockley on 07702 167786 or alternatively, send an email to david.hockley@holtautomotive.com to discuss further.....Read more...
Software Design Engineer
Salary up to £55k DOE
33 Days Holiday (Incl stats)
Company Pension
PPE Supplied
Company Values Reward Scheme
My client is looking to recruit a Software Design Engineer to join our dynamic and ambitious design team. The post holder will contribute to the growth and success of the business through the development of innovative controls-based solutions
The Company
My client provides bespoke turnkey automation solutions offering their customers a complete one stop solution - from design to delivery.
Key Responsibilities
The following list is an indication of roles and responsibilities you will be expected to undertake as the Software Design Engineer. The list is not exhaustive and intended as guidance only, but in general you will:
- Proactively collaborate as part of the wider design department to scope befitting technical solutions for projects. This would include hardware specification such as safety devices, communication architectures/protocols etc, where product selection would have direct implications on the software solution.
- Apply commercial awareness when determining solutions suitable to the price point of the project.
- Write and test code for large scale projects (Motion, Robotics, Integrating 3rd Party Equipment, PLC, HMI)
- Author (internal/external) design philosophy documents to support the intended functions of the automated equipment.
- Ensuring all software is written, documented, and controlled in accordance with company procedures and processes.
- Ensure that the solutions determined adhere to all relevant Codes of Practice, Company and Industry Standards.
- Develop and maintain code libraries and standardised practices to deliver commonality and reduce commissioning timelines.
- Review customer project documentation to fully understand project requirements.
- Participate in customer meetings of either existing or potential projects.
- Participate in internal design reviews on existing or potential projects.
- Collaborate with other Mechanical and Electrical teams and community members.
- Develop handover documentation for the commissioning team and assist with fault finding.
The Right Person
The successful Software Design Engineer will possess the following skills
- Degree in relevant engineering discipline or equivalent recognised qualifications.
- Proven electrical, pneumatic and mechanical experience within the automation industry.
- Ability to follow electrical and pneumatic schematic diagrams and drawings.
- Comprehensive knowledge of diagnostics, test and repair of electronic/electrical and mechanical systems.
- Thorough knowledge of safety procedures and applicable regulations and guidelines.
- Programming experience of PLCs/HMIs. Primarily Rockwells suite of automation software, but knowledge of Mitsubishi, Siemens, B&R, and Codesys would be advantageous.
- Knowledge of script-based programming would be an advantage.
- In depth knowledge of Motion Control and 6 Axis Robot systems.
- Experience with robotics, AI and machine learning.
- Solid understanding of computer programming and software development.
- Ability to troubleshoot equipment and perform complex system tests.
- A desire to continually upgrade technical knowledge.
- Ability to work under pressure to meet deadlines.
- Excellent critical thinking and problem-solving ability.
- Strong leadership and problem-solving skills.
- Excellent organisational skills and attention to detail.
- Excellent verbal and written communication skills.
- Good working knowledge of Microsoft Office software suite.
Interested? Here are your three options
1. This is the job for me, I meet all the requirements Call now and lets talk through your experience. Ask for Jon Webster on between 8.30am 5.30pm
2. I think Im right for this position, but Im not sure about some of the detail Click apply now so I can read your CV and come back to you.
3. Im interested but need to know more about what this job can offer me email jon@precisionsearch.uk with your CV and questions and I will reply with more detail.
Precision are committed to keeping our candidates informed and offer a guaranteed response within 7 days when applying through the application system.
PPTP....Read more...
Position: BIM Engineer
Location: Mayo
Salary: Negotiable D.O.E
The Job: The BIM Engineer will support all parties working within the BIM process, delivering all 3D and 2D deliverables, production of 2D co-ordination and installation drawings and 3D elements needed for design and co-ordination.
Responsibilities
Produce BIM model programmes/ Master Information Delivery Plans (MIDPs) for project in line and in advance of the construction program.
Track all agreed design changes to ensure they are being inputted and coordinated in 3D models.
Attend project/site meetings and keep well informed of all construction activities. Check models in line with upcoming activities to anticipate and foresee any on-site issues. Raises issues for resolution with relevant site person.
Project specialist in the BIM 360 software platform (Field, Glue, Docs and Navisworks), troubleshooting, training site staff and setting up guidelines for use. Ensure all staff are trained in and use iPads for creating issues, checklists, equipment, daily updates and reporting.
Produce Mechanical 3D models as required using Revit, Autocad and Civils 3D software.
Manage the collation and input of asset information models to the asset information models for handover at project completion.
Laser site scanning and using point clouds to verify works completed
Updating and administrating of all co-ordination documents registers and drawings
Assist with tenders and other drawing requirements from the business
Attend co-ordination meetings and develop communication skills
Requirements:
3rd level qualification in Mechanical Engineering, Building Services Engineering or Strong trades background coupled with a BIM qualification
Be proficient in BIM modelling packages including Revit, AutoPlant, AutoCAD 2D and 3D
A minimum of 2+ years’ experience within a BIM function
Mechanical background and have a proven track record in a similar role
Strong communication and organisational skills
Ability to work under pressure and to short deadlines
Due to the urgency of this vacancy, it is not possible for our client at this time to consider anyone without the appropriate work permits, visas or sponsorship's already in place. Therefore, we are unable to consider candidates who do not have full authorisation to work in Ireland. Applications submitted without the necessary visa in place will not be considered.....Read more...
Mobile Maintenance Engineer - FM Service Provider - Mobile (West London and Central London) - Up to £43,000 Are you a Mobile Engineer looking for a new challenge? Do you want to be mobile in London? Exciting opportunity to work for a family run FM service provider situated in West London and Central London. CBW are currently looking for 2 x Electrical / Mechanical Maintenance Engineers to cover in the region of circa 10-15 commercial buildings located in West and Central London The successful candidates will be electrically biased (C&G / NVQ) with a proven track record in commercial building maintenance. This is Mobile position and will require the successful candidates to attend a number of sites where he or she will be required to carry out PPM/Reactive maintenance to electrical and mechanical plant with particular emphasis on electrical & mechanical maintenance. In return the company is offering a competitive salary paying up to £43,000 per annum based on experience/qualifications, overtime and further training. Key duties & ResponsibilitiesWeekly Fire Alarm Tests and logWeekly AOV test and LogL8 water hygiene monitoringFan Coil Unit servicingHIU/CIU servicing (Training will be given)AHU servicingMVHR servicingWeekly/Monthly Generator test and logWeekly CHP Checks and logMonthly Car Park smoke ventilation test and logMonthly/Annual Emergency Lighting test and logSupervision of Sub ContractorsAssist with preparation of Quotations for remedial works.Be available for duty call out cover, on a Rota basis (currently 1 in 8)Hours of workMonday to Friday - Hours: 08:00am to 17:00pmRequirementsCity & Guilds / NVQ in Electrical Installation / Engineering You must be able to provide copies of your trade certificates (Essential)A proven track record in commercial building maintenanceAn understanding of commercial building maintenanceMulti-skilledGood communication skillsExcellent customer service skillsPackageUp to £43,000 (Based on experience / Qualifications)Company Vehicle with Fuel card and FloatCall out 1 in 8 PDA's23 days holiday + BHOvertime availableTraining and development opportunitiesContributory pension schemePlease send your CV to Charlie Long at Cbw Staffing Solutions for more information''....Read more...
Mobile Maintenance Engineer - FM Service Provider - Mobile (London & M25) - Up to £45,000 Are you a Mobile Engineer looking for a new challenge? Do you want to be mobile in London? Exciting opportunity to work for a family run FM service provider situated in London & M25. CBW are currently looking for 2 x Electrical / Mechanical Maintenance Engineers to cover in the region of circa 10-15 commercial buildings located in London & M25. The successful candidates will be electrically biased (C&G / NVQ) with a proven track record in commercial building maintenance. This is Mobile position and will require the successful candidates to attend a number of sites where he or she will be required to carry out PPM/Reactive maintenance to electrical and mechanical plant with particular emphasis on electrical & mechanical maintenance. In return the company is offering a competitive salary paying up to £45,000 per annum based on experience/qualifications, overtime and further training. Key duties & ResponsibilitiesWeekly Fire Alarm Tests and logWeekly AOV test and LogL8 water hygiene monitoringFan Coil Unit servicingHIU/CIU servicing (Training will be given)AHU servicingMVHR servicingWeekly/Monthly Generator test and logWeekly CHP Checks and logMonthly Car Park smoke ventilation test and logMonthly/Annual Emergency Lighting test and logSupervision of Sub ContractorsAssist with preparation of Quotations for remedial works.Be available for duty call out cover, on a Rota basis (currently 1 in 8)Hours of workMonday to Friday - Hours: 08:00am to 17:00pmRequirementsCity & Guilds / NVQ in Electrical Installation / Engineering You must be able to provide copies of your trade certificates (Essential)A proven track record in commercial building maintenanceAn understanding of commercial building maintenanceMulti-skilledGood communication skillsExcellent customer service skillsPackageUp to £45,000 (Based on experience / Qualifications)Company Vehicle with Fuel card and FloatCall out 1 in 8 PDA's23 days holiday + BHOvertime availableTraining and development opportunitiesContributory pension schemePlease send your CV to Dan Barber at Cbw Staffing Solutions for more information....Read more...
The Job
The Company:
The company is a well-known supplier of machine tools used for metal cutting.
Customer base includes automotive and fabrication companies etc…
As part of their continued expansion this opportunity has arisen for someone with good engineering knowledge to join the team.
Established in 1980s.
Recruiting due to growth.
The Role of the Machine Tools Service Engineer
This Machine Tools Service Engineer is a field-based role, visiting client’s sites and performing maintenance and repairs on machine tools such as milling machines and lathes etc…
The Service Engineer will also get involved in commissioning Machine Tools.
Working on both Mechanical and Electrical aspects of the Machine Tools.
The role is based on a 50-hour week, however this is door to door.
Benefits of the Machine Tools Service Engineer
£40-£50k
Pension
Vehicle
Laptop and Phone
Training provided
25 days’ holiday + 8 bank holidays.
The Ideal Person for the Machine Tools Service Engineer
Experience with servicing machine tools.
Good communication skills as this is a client facing role.
Experience using ProTRAK (advantageous)
Engineering qualification in the form of degree, apprenticeship or HNC/D +.
Consultant: Darren Wrigley
Email: DarrenW@otrsales.co.uk
Tel no. 0208 397 4114
Candidates must be eligible to work and live in the UK.
About On Target
At On Target, we specialise in sales, technical and commercial jobs in the Engineering, Construction, Building Services, Medical & Scientific, and Commercial & Industrial Solutions sectors, enabling our consultants to become experts in their market sector. We place all levels of personnel, up to Director across the UK and internationally.....Read more...
An exciting opportunity at a leading technology solutions provider has hit the market; the company is hiring for a Design / Development Engineer based in Lincoln.
The company design and manufacture Microwave/RF components from concept to finished product.
Main responsibilities of the Design / Development Engineer:
Design and manufacture of multi-chip modules.
Design and manufacture of RF and microwave components and subsystems.
Working up to 50GHz.
Working with various components such as power amplifiers, mixers, and limiters.
Working with various subsystems such as SatCom, RF over Fiber and FMCW radar.
Requirements of the Design / Development Engineer:
Engineers to be hands on and results driven.
Work independently and as part of team.
Ideally has managerial experience and knowledge of developing technical employees.
See projects through quotation to production.
Proficient with microwave simulation and design tools such as ADS or Microwave Office.
Proficient with mechanical design tools such as AutoCAD or Solidworks.
Be familiar with chip and wire technology as well as SMT on laminate.
HNC/Degree in relevant subject OR extensive experience.
This is a great opportunity for a Design / Development Engineer that is an expert in their field, agile in their approach, and able to deliver optimal solutions for their customers.
To apply for this Design / Development Engineer role in Lincoln please send your CV to kchandarana@redlingroup.Com or please call 01582 878 830 / 07961 158784.....Read more...
Be part of a leading automotive company known for developing vehicles. We are searching for an experienced engineer to lead powertrain concept.
Essential Skills and Qualifications:
Over 5 years of design experience in the automotive industry using Catia V5
Strong background in concept development and full vehicle packaging
Expertise in carbon fibre composite design powertrain layout
Solid automotive experience and understanding of industry standards
Skilled in creating detailed technical drawings including geometric tolerancing
Knowledge of mechanical design for automotive systems ( fastening, sealing, and manufacturing processes)
Familiar with DFMEA and risk management in the automotive sector....Read more...
Job Title Mobile Plant Engineer
Salary - £30000 - £45000 (DOE)
Hours 39 p/week (Mon-Fri) Alternate Sat mornings, 8-12pm at overtime rate.
Location Carlisle and surrounding areas.
I am currently working on behalf of a well-known Agricultural/Construction main dealer in the Carlisle area who have an exciting opportunity for an experienced Mobile Plant Engineer. This role will be covering the area for any call outs / breakdowns and occasionally working on all vehicles/machines at the Depot if needed. The role of Mobile Plant Engineer will entail mainly servicing and maintaining construction equipment. You will be responsible for making sure machinery and equipment runs smoothly and provide excellent customer service.
Great opportunity for any Mobile Plant Fitter with on-going training available, paid overtime 1.5x rate, company van etc. Contracted hours = 39 p/week anything over this will be at overtime rate. (Engineers typically doing 45-55 Hours a week)
Mobile Plant Engineer Main Responsibilities
This role includes the following key priorities:
- Servicing and repairing machinery and equipment, either in the workshop or during field visits.
- Fixing faults or installing replacement parts.
- Compliance with manufacturers service and warranty procedures.
- Account for all hours worked using timesheet or scanner, as applicable.
- Keep the Management informed of progress.
- Maintain work area and company vehicle in a safe, tidy, and professional manner, necessary to enhance productivity and efficiency.
- Employees must act in accordance with the company Health & Safety Policy, Risk Assessments and Safe Working Practices.
Mobile Plant Engineer Personal Specification
- Good mechanical knowledge of any vehicle or machinery would be ideal and experience in the Plant/agricultural sector is essential.
- Good problem-solving skills.
- The ability to work on your own or as part of a team.
- An awareness of health and safety.
- A full drivers licence is essential.
Feel like this role is for you?
Apply now for this Mobile Plant Engineer position - get in touch with David Hockley on 07702 167786 for more information or apply via email at david.hockley@holtautomotive.co.uk
Mobile Plant Engineer - Carlisle....Read more...
Job Title Agricultural Engineer (Mobile/Workshop)
Salary - £35000 - £45000 (Flexible DOE)
Hours Monday to Friday, Day Shift Overtime Available
Location Braintree
I am currently working on behalf of a well-known Agricultural main dealer in the Braintree area who have an exciting opportunity for an experienced Agricultural Engineer. This role will be covering the area for any call outs / breakdowns and working on all vehicles/machines at the Depot. Great opportunity with on-going training available, paid overtime when required, company van etc. The role of Agricultural Engineer will entail mainly servicing and maintaining farm equipment. You will be responsible for making sure machinery and equipment run smoothly and provide excellent customer service. Also opportunity to work a split role as supervisor DOE.
Agricultural Engineer Main Responsibilities
This role includes the following key priorities:
- Servicing and repairing machinery and equipment, either in the workshop or during field visits.
- Fixing faults or installing replacement parts.
- Compliance with manufacturers service and warranty procedures.
- Account for all hours worked using timesheet or scanner, as applicable.
- Keep the Management informed of progress.
- Maintain work area and company vehicle in a safe, tidy, and professional manner, necessary to enhance productivity and efficiency.
- Employees must act in accordance with the company Health & Safety Policy, Risk Assessments and Safe Working Practices.
Agricultural Engineer Personal Specification
- Good mechanical knowledge of any vehicle or machinery would be ideal and experience in the agricultural sector would be a bonus but not essential as full training is available.
- Good problem-solving skills.
- The ability to work on your own or as part of a team.
- An awareness of health and safety.
- A full drivers licence is essential.
Feel like this role is for you?
Apply now for this Agricultural Engineer position - get in touch with David Hockley on 07702 167786 for more information or apply via email at david.hockley@holtautomotive.co.uk
Agricultural Engineer - Braintree....Read more...
Job Title – Multi-Skilled Maintenance Engineer Location: MiddlesexSalary – up to £45,000Shift – Afternoons; 1400-2200Industry – FMCG/Food/Manufacturing Synergi are recruiting for a Multi-Skilled Maintenance Engineer to join one of the leading FMCG/Manufacturers in the country. This is the chance to join a company with presence in over 40 different markets. As a multi-skilled maintenance engineer, you will be working alongside other multi-skilled maintenance engineers. Roles & Responsibilities as a Multi-Skilled Maintenance Engineer:
Conducting Reactive and planned Maintenance on high-speed production machinery.
Possess a good level of understanding to the process, products and all quality procedures.
Responsible for overseeing Planned Maintenance
Diagnosing faults
Identifying problems on machinery and implementing solutions.
Carry out fault finding on a diverse range of production equipment.
The Ideal background of a Multi-Skilled Maintenance Engineer:
Excellent awareness and experience in relation to Quality, Health & Safety.
Be familiar with planned preventative maintenance.
Experienced in fault finding and problem solving.
Comprehensive Knowledge of high-speed mechanical systems, electrical systems, Automation and PLC control systems.
What you need to do nowIf you are a Multi-Skilled Maintenance Engineer and are interested in Multi-Skilled Maintenance Engineer roles, please apply through this advert.Contact Information: Please apply below or Contact Aash on 01923 227 543 alternatively you can send your CV to
Job Ref 6995....Read more...
Trainee Field Service EngineerSunderland
£28,000 - £30,000 + Bonus + Door to door + Training + Stability + Flexibility + Family - Feel + Work life balance + Job satisfaction + Company Van + Fuel Card + Holiday + Pension + Appreciation
Solidify your career now as a Trainee Field Service Engineer where you will have job security for the long term. On offer is consistent full training in the industry to do your job to the best of your ability and become a specialist in the sector whilst having constant support with a company where you will be appreciated. Join now and secure a job for life accompanied by a great package and bonuses to increase your earnings!
This company operates in the measurement and weighing equipment industry and is expanding, so they need an additional Trainee Field Service Engineer to come and join the team. You will receive training to do your job to the best of your ability and enjoy your every day work. This company is known for their very low turnover of staff and fantastic retention rate!
Your Role As Trainee Field Service Engineer Will Include: * Full on the job training * Service and calibrations of medical weighing scales * Happy to travel and stay away when necessary The Successful Trainee Field Service Engineer Will Have: * Previous experience with hand tools / site visits * Full driving licence * Ability to commute to Sunderland area & stay away If this sounds like you apply or call Rebecka Van Ristell on 07458163046 for IMMEDIATE CONSIDERATION.Keywords: trainee engineer, trainee field service engineer, mechanical engineer, electrical engineer, field,field engineer, calibration engineer, service technician,service engineer, trainee technician, mobile engineer,nhs engineer, hoist engineer, stairlift engineer, hoist technician,driver, tool engineer, toolmaker,Middlesborough,Stokesley,Redcar,Hartlepoole,Peterlee,Thornaby,Yarm, Darlington,Guisborough,Durham,SpennymoorNorthallerton,Catterick,Sunderland, Newcastle,Darlington
This vacancy is being advertised by Future Engineering Recruitment Ltd. The services of Future Engineering Recruitment Ltd are that of an Employment Agency.
Future Engineering Recruitment Ltd can only accept applications from candidates who have a valid legal permit or right to work in the United Kingdom. Potential candidates who do not have this right or permit, or are pending an application to obtain this right or permit should not apply as your details will not be processed.
We will endeavour to respond to all applicants however due to the sheer volume of response, we can only guarantee that candidates who have been shortlisted will be contacted....Read more...
Redline are currently working on a 6 month Contract CAD Engineer - Inventor, Hertfordshire opportunity with a leader in intrinsic electronics systems based in Hertfordshire.
As our client is considered exempt for IR35 purposes, the successful candidate will be responsible for assessing IR35 status, should you wish to operate via your own PSC.
Our client is a market-leader in cutting edge ruggedised technology, delivering to a wide range of clients around the globe in defence markets. They are in need of extra support from a Contract CAD Engineer - Inventor, to re-visit and modify a backlog of their current designs, that span the past 50 years. The contract will cover sheet metal work, 3D printing, and electrical, in the form of digital files, paper drawings and design on film, whilst their permanent team are working on a new project win.
You will be required to work on site 5 days a week with the mechanical team in Hertfordshire.
Key Requirements – Contract CAD Engineer - Inventor, Hertfordshire:
- Recent experience with Inventor
- Experience of producing drawings of enclosures
- Sheet metal/metal design experience
- Knowledge of BS8888: Technical product documentation and specification
All candidates must be able to obtain SC Security Clearance
For more information or to apply for the Contract CAD Engineer - Inventor, Hertfordshire opportunity, please contact Maddie Ramsden at MRamsden@RedlineGroup.Com/ 01582878815 or 07940254185 quoting reference MMR1025....Read more...
An exciting opportunity at a leading technology solutions provider has hit the market; the company is hiring for a RF/Microwave Design Engineer based in Lincoln.
This Lincoln based company design and manufacture Microwave/RF components from concept to finished product.
Main responsibilities of the RF/Microwave Design Engineer:
Design and manufacture of multi-chip modules.
Design and manufacture of RF and microwave components and subsystems.
Working up to 50GHz.
Working with various components such as power amplifiers, mixers, and limiters.
Working with various subsystems such as SatCom, RF over Fiber and FMCW radar.
Requirements of the RF/Microwave Design Engineer:
Engineers to be hands on and results driven.
Work independently and as part of team.
Ideally has managerial experience and knowledge of developing technical employees.
See projects through quotation to production.
Proficient with microwave simulation and design tools such as ADS or Microwave Office.
Proficient with mechanical design tools such as AutoCAD or Solidworks.
Be familiar with chip and wire technology as well as SMT on laminate.
HNC/Degree in relevant subject OR extensive experience.
This is a great opportunity for a RF/Microwave Design Engineer that is an expert in their field, agile in their approach, and able to deliver optimal solutions for their customers.
To apply for this RF/Microwave Design Engineer role in Lincoln please send your CV to kchandarana@redlingroup.Com or please call 01582 878 830 / 07961 158784.....Read more...
The Company:
Privately owned manufacturer of instrumentation and flow control equipment, with a great name in the marketplace.
They will give you full training at their manufacturing premises in Europe before you start your first day in the office.
Once you are fully trained you will become an External Service Engineer, and you will be given qualifications to recognise this.
The Role of the Trainee Service Engineer:
Initially you will be based in the office whilst you are trained, this will be Monday – Friday in Newmarket.
You will be responsible for booking in/shipping service work, service and calibration of instruments, over the phone technical support.
Once trained there might be the option to move into a field based on-site role.
Benefits of the Trainee Service Engineer
£23k- £25.5k
Annual bonus
25 days holiday
Life insurance
Private healthcare
The Ideal Person for the Trainee Service Engineer
The ideal candidate will have had exposure to mechanical engineering through a qualification; this could be an NVQ or B-TEC in any engineering discipline.
Will consider candidates from a automotive technician background.
You will need to be self motivated and willing to do hands on repair work of engineering components.
The office is in Newmarket so you will need to be in a commutable distance from here.
If you think the role of Trainee Service Engineer is for you, apply now!
Consultant: Darren Wrigley
Email: Darrenw@otrsales.co.uk
Tel no. 0208 397 4114
Candidates must be eligible to work and live in the UK.
About On Target
At On Target, we specialise in sales, technical and commercial jobs in the Engineering, Construction, Building Services, Medical & Scientific, and Commercial & Industrial Solutions sectors, enabling our consultants to become experts in their market sector. We place all levels of personnel, up to Director across the UK and internationally.....Read more...
Junior Electrical Design Engineer required for a prestigious Engineering and Manufacturing business, offering in excess of 35 years experience, renowned for quality deliverables and services for a wide range of industries including Pharmaceutical, Energy and Food.This opportunity is based in BRADFORD, meaning that the successful Junior Electrical Design Engineer will be easily able to commute from surrounding towns and cities including; Leeds, Huddersfield, Dewsbury, Halifax, Wakefield, Keighley and Bingley.Key Responsibilities of the Junior Electrical Design Engineer will include;
Produce Block Cable Diagrams and Single Line Diagrams
Check Control Panel Schematics
Advise production of Control Philosophies
Produce Bill of Materials for Electrical components to be ordered
Assist Mechanical Design Engineers with electrical input into designs
Provide P & ID advice to other departments
For the role of Junior Electrical Design Engineer, we are keen to receive applications from individuals who have;
Graduated with a BEng in Electrical Engineering, HNC Qualified in Electrical design or higher
The ability to read technical drawings
Experience using AutoCAD
1+ years experience as a Junior Electrical Design Engineer or similar
Salary & Benefits
£26,000 - £28,000 per annum
28 Days annual leave
Birthdays off
Closed over Christmas
Long service award
8% Combined pension
Mon – Thur – 7:45am – 4pm
Fri – 8am – 3pm
....Read more...
Field Service engineer
Athboy
€45,000 - €50,000 + Training + Stability + Flexibility + Family - Feel + Work life balance + Job satisfaction + Appreciation + Door to door + Company Van + Fuel Card + Holiday + Pension + Phone + Tablet + Tools + low staff retention
Solidify your career now as a Field Service Engineer in a prestigious industry where you will have job satisfaction for the long term. On offer is consistent full training in the industry to do your job to the best of your ability and become a specialist in the sector whilst having constant support with a company where you will be appreciated. Join now and secure a job for life accompanied by a great package!
This company operates in the weighing equipment and scales sector and provides high quality services to a variety of industries. Due to growth, an additional Field Service Engineer is required to come and join the tight knit team. You will receive training to do your job to the best of your ability and enjoy your every day work. This company is known for their very low turnover of staff and fantastic retention rate!
Your Role As A Field Service Engineer Will Include: * Full on the job training * Service and repairs of weighing scales and equipment * Field service role covering Ireland where necesarryThe Successful Field Service Engineer Will Have: * Previous experience in an electrical/ electronic industry (measuring equipment preferred) * Full driving licence * Ability to travel around Ireland when necessaryIf this sounds like you apply or call Rebecka Van Ristell on 07458163046 for IMMEDIATE CONSIDERATION.Keywords: field engineer, field service engineer,trainee engineer, trainee field service engineer, mechanical engineer, electrical engineer, field, calibration engineer, service technician,service engineer, trainee technician, mobile engineer,nhs engineer, hoist engineer, stairlift engineer, hoist technician,weighing equipment engineer, scales engineer, weighing equipment , scales, laboratory engineer, tool engineer, toolmaker,Dublin,Batterstown, Summerhill,Dunleer,virginia,dunalk, Ireland,blessington,Athboy,Ashbourne
This vacancy is being advertised by Future Engineering Recruitment Ltd. The services of Future Engineering Recruitment Ltd are that of an Employment Agency.
Future Engineering Recruitment Ltd can only accept applications from candidates who have a valid legal permit or right to work in the United Kingdom. Potential candidates who do not have this right or permit, or are pending an application to obtain this right or permit should not apply as your details will not be processed. We will endeavour to respond to all applicants however due to the sheer volume of response, we can only guarantee that candidates who have been shortlisted will be contacted....Read more...
Catfoss Recruitment Ltd are currently in partnership with an award-winning specialist manufacturing company based in Oxfordshire and they are looking to recruit a Multi-Skilled Maintenance Engineer with an Electrical Bias on a permanent basis to their expanding team.
Mon - Fri Days + Overtime & Bens - flexible start times 7am/8am/9am
As a Maintenance Engineer you will be responsible for the routine and preventative maintenance onsite.
Maintenance Engineer (Electrical Bias) – Roles and Responsibilities
Carry out routine maintenance work and respond to equipment faults
Ensure all automation within the business operates efficiently and effectively by carrying out regular inspections and diagnosing faults
Overcome unplanned problems and where possible carry out repairs
Work with other maintenance engineers to design and implement a preventative maintenance plan
Work with specialist equipment, such as programable logic controllers (PLC)
Facilitate installations of new machinery, automation projects and partake in site improvement projects
Carry out all work in line with company Health and safety guidelines
Ensure that your working area is kept in a safe and tidy
Maintenance Engineer (Electrical Bias) – Mandatory Responsibilities
All employees have the following responsibilities:
Working in accordance to the company health and safety policy to take reasonable care for their own and colleagues health and safety.
Adhere to the Company’s H&S requirements (i.e. risk assessments, work instructions and through training).
Work in accordance with information and training provided, and not undertake any task for which authorisation and / or training has not been given.
Desires, Knowledge, Skills and Experience
A proactive work ethic
Good at establishing working relationships with both internal staff and external suppliers, developing relationships and using those relationships to drive behaviours
Results oriented person that will constantly challenge the way things are done
Mechanical and hydraulic maintenance
Electrical maintenance
Injection / compression moulding
Qualifications: C&G/NVQ/BTEC/HNC/HND Electrical Engineering
Maintenance Engineer previous suitable job titles: Maintenance Engineer, Maintenance Technician, Electrical Engineer, Multi-Skilled Maintenance Engineer, Multi-Skilled Engineer, Shift Engineer, Electrical Maintenance Engineer, Electrical Maintenance Technician
Please apply ASAP....Read more...
Seeking a skilled Senior Test Engineer with expertise in space propulsion. Responsible for overseeing firing site operations, including site preparation, maintenance, fuel and oxidizer handling, pressure systems.
Key Responsibilities
Design and manufacture of liquid propellant and high-pressure gas feed systems.
Advanced training provision in key operational skills on firing sites.
Proficient analysis and assessment of test data, producing high-quality analysis material.
Adherence to COMAH controlled testing standards.
Minimum Requirements:
Mechanical fitter or practical engineering skills
Ideally qualified to OU or equivalent graduate level course in engineering.
Level 4 training on the Skills and Competency Matrix with in-depth experience.
....Read more...
Seeking a skilled C++ Automotive Test Engineer to join our dynamic team at an innovative automotive company
Responsibilities:
Design and develop testing tools, scripts, and fixtures for new automotive products.
Enhance existing testing tools and processes.
Collaborate with test engineers to meet project deadlines.
Execute tests using our automated testing framework.
Analyse and report test results.
Requirements:
Degree in Automotive, Motorsport, Mechanical, or Electrical Engineering.
Strong programming skills in C++ and Python.
Full clean UK driving license.
Experience with GPS and automotive technologies.
Background in automotive or motorsport data analysis.
Knowledge of testing methodologies.
Valid UK driving license.....Read more...
Seeking a skilled C++ Automotive Test Engineer to join our dynamic team at an innovative automotive company
Responsibilities:
Design and develop testing tools, scripts, and fixtures for new automotive products.
Enhance existing testing tools and processes.
Collaborate with test engineers to meet project deadlines.
Execute tests using our automated testing framework.
Analyse and report test results.
Requirements:
Degree in Automotive, Motorsport, Mechanical, or Electrical Engineering.
Strong programming skills in C++ and Python.
Full clean UK driving license.
Experience with GPS and automotive technologies.
Background in automotive or motorsport data analysis.
Knowledge of testing methodologies.
Valid UK driving license.....Read more...
Shift Engineer – Continental Shift – Commercial Building – St Pauls, London – £53,000 Per annumMy client is looking for an Electrical or Mechanical Shift Engineer to be based in a commercial building in St Pauls, London. A successful candidate will be electrically or mechanically biased (C&G / NVQ). Working with the project team on site, He or she will be required to carry out electrical, and mechanical maintenance. In return, the company offers a competitive salary of £53,000, further training and career progression. Package£53,000 per annumUniform and Tools ProvidedCycle to work scheme22 days holidayOvertime AvailablePensionInternal Progression & DevelopmentHours of workContinental Shift - 4 nights, 4off, 3 days, 3 nights, 6off, 4 days - 07:00am - 19:00pm / 19:00am - 07:00am Key Duties & ResponsibilitiesLighting (Small installation, Fault-finding, Lamping, Changing ballast's, Control panel, Power distribution)Emergency lightingAir Conditioning - Air Handling Units / Fan Coil Unit (Filter changes, cleaning)Chillers - Re-setWater Treatment (Temperature checks / Not dosing)Monitor mechanical plantPlumbing - Unblocking toiletsPumps, motorsWater TreatmentBMS System - Monitor (i.e. Hot & Colds)Undertake all allocated tasks and perform them in a timely and professional manner.Be proactive in identifying and reporting faults with building services equipment and take steps to resolve them.Be proactive to ensure all H&S issues are reported/escalated as required.Maintain informal communications with Client staff members related to service levels and issues.Report service affecting issued to the site management team for formal communication with the client.Remain flexible with regard to site attendance and tasks undertaken within personal competency.Be fully aware of relevant Health and Safety and general legislative matters.Escort specialist subcontractorsRequirementsElectrically qualified level 3 or Mechanically qualified level 2(C&G, NVQ etc)18th edition (If electrically qualified)Experience working in a large commercial buildingYou must be able to provide copies of your trade certificates (Essential)A proven track record in commercial building maintenanceMulti-skilledGood communication skillsExcellent customer skillsMust be able to get to the site for 07:00 am startIf you are interested please get in contact with Alex Denton of CBW Staffing solutions!....Read more...
