Electrical Maintenance Engineer - Uxbridge - Commercial Building - Temp to perm - immediate start- up to £44k Are you an Electrical Shift Engineer looking for a new challenge?Do you have Commercial Building maintenance Experience?Are you looking for work around Uxbridge Exciting opportunity to work for a FM service provider based in a commercial property in Uxbridge, working with a team of 5 Engineers on site. CBW are currently recruiting for an Electrical Shift Engineer for a temp to perm contract. The successful candidates will be Electrically qualified with a proven track record working with building maintenance. In return, the company is offering a hourly rate of up to £25p/h. Key duties & ResponsibilitiesLighting (Small installation, Fault-finding, Lamping, etc)Emergency lighting testsControl PanelsChanging BallastBMS System - Monitor (i.e. Hot & cold)Carry out all aspects of M&E/Fabric maintenanceMaintain and update Log booksPlumbing - Unblocking toiletsPumps, motorsHours of work / Shift Pattern / Rates7am - 7pmTemp to perm contractDay Shift 4 on 4 off£25p/h£44k RequirementsElectrically qualified City & Guilds - Level 3A proven track record in Building MaintenanceGood Leadership & Management skillsSafe systems of Work Procedure - PTW, RAMS experience Health and safety and statutory compliance knowledgeExcellent oral and written communication skills and the ability to develop excellent working relationships both internal and externallyProven IT skills, including use of Microsoft OfficePlease send your CV to Cammie-Jo Ford at CBW Staffing Solutions for more information. ....Read more...
The Level 3 Food and Drink Engineering Maintenance apprenticeship programme lasts four years, and combines block release at Kirklees College (Huddersfield), with on the job work experience within the engineering department at Grupo Bim bo UK Ltd (New York Bakery) in Swinton, Mexborough. Grupo Bim bo is the largest Bakery product manufacturer in the world.
If successful at the end of the program you will have the following knowledge, skills and understanding to be a Food and Drink Maintenance Engineer:
Food processing/manufacturing and product knowledge (to meet company requirements e.g., dairy/confectionary/meat processing)
Legislation and regulations in the food and drink industry, including understanding of food safety, health and safety, hazard analysis critical control Point (HACCP), Threat Assessment Critical Control Point (TACCP) and Vulnerability Assessment Critical Control Point (VACCP)
Basic principles of sustainability and environmental legislationThe impact of customer requirements and demands on the food chain
The key principles of cleaning and hygiene processes cover both Cleaning in Place (CIP) and cleaning out of place systems
The key principles of quality management systems and processes
The key principles of Continuous Improvement (CI) ManagementMaterials science, including the key features of raw materials, their own uses in foods production and types of equipment used to process them
Types of best practice maintenance approaches and techniques in the food and drink industry
The principles of fault finding
The operation of mechanical equipment in the food and drink industry
How to produce replacement components
The function of fluid power systems
The operation of heat exchange equipment
The principles of cutting and welding in the food and drink industry
Principles of electrical systems, including their uses, safety, and legislation
Services and utilities knowledge, including the importance and importance of energy management and pollution control in food production
Training:You will study towards a Level 3 Food and Drink Maintenance Engineer Apprenticeship Standard at Kirklees College.
You will achieve a Diploma in Food and Drink Engineering Maintenance.
The college element of this apprenticeship has typically been on “block release”, so there has been the expectation to work and study away from home.
When required, accommodation and travel will be organised, but we need you to have a mature outlook, be mobile, and be “up” for the challenge of managing yourself and your studies when you are away from home at college, and when working at site.
Typical College attendance:
The typical duration of college attendance in previous years is shown below-
Year 1 = 17 weeks, Year 2 = 10 weeks, Year 3 = 16 weeks, Year 4 = 0 weeks
This is a 4-year programme.
The final year will involve completion of a portfolio and preparation for End Point Assessment (EPA). This measures the skills, knowledge and behaviours outlined in the standard and is carried out by ESFA approved organisations independent from the college.Training Outcome:
Following successful completion of the apprenticeship the applicant will be given the opportunity to apply for a shift based, multi skilled engineer
Following further development, possibilities exist in various maintenance supervision and management positions, manufacturing and project management
Employer Description:Ambient food manufacture and largest Bakery product manufacturer in the world.Working Hours :Days and shifts to be confirmed.Skills: Communication skills,Team working,Resilient,Can do attitude,Practical aptitude,Practical approach,Confident self-starter,Ability to work accurately,Safe worker,Accepts responsibility,Proactive,Pride in work,Integrity,Time management....Read more...
The role will involve undertaking service and maintenance tasks under the direct supervision of an experienced mentor commensurate with experience and level of training. You will gain experience with a dedicated mentor who will help build up your knowledge on electrics, hydraulics, engines and systems. You will be working on a variety of Plant Machinery such as JCB's to Bomag Rollers. Training:You will be working towards your Land Based Service Engineer Level 2 which takes 24-months and will then move onto the Land Based Service Technician Level 3 which will take 12-months to complete.
College will be on block release, and you will be required to stay away from home.Training Outcome:Once you have completed your apprenticeship you will be required to continue your development programme with the company in order to become a fully qualified Plant Engineer.Employer Description:Clee Hill Plant Limited is a leading construction plant hire company and the largest compaction and surface dressing hire company in the UKWorking Hours :Monday to Friday 8:00am to 4:30pmSkills: Communication skills,Attention to detail,Organisation skills,Analytical skills,Logical,Team working,Initiative,Patience....Read more...
The role will involve undertaking service and maintenance tasks under the direct supervision of an experienced mentor commensurate with experience and level of training. You will gain experience with a dedicated mentor who will help build up your knowledge on electrics, hydraulics, engines and systems. You will be working on a variety of Plant Machinery such as JCB's to Bomag Rollers. Training:You will be working towards your Land Based Service Engineer L2 which takes 24 months and will then move onto the Land Based Service Technician L3 which will take 12 months to complete.
College will be on block release and you will be required to stay away from home.Training Outcome:Once you have completed your apprenticeship you will be required to continue your development programme with the Company in order to become a fully qualified Plant Engineer.Employer Description:Clee Hill Plant Limited is a leading construction plant hire company and the largest compaction and surface dressing hire company in the UKWorking Hours :Monday to Friday
8:00am to 4:30pmSkills: Communication skills,Attention to detail,Organisation skills,Analytical skills,Logical,Team working,Initiative,Patience....Read more...
The role will involve undertaking service and maintenance tasks under the direct supervision of an experienced mentor commensurate with experience and level of training
You will gain experience with a dedicated mentor who will help build up your knowledge on electrics, hydraulics, engines and systems
You will be working on a variety of Plant Machinery such as JCB's to Bomag Rollers
Training:
You will be working towards your Land Based Service Engineer Level 2 which takes 24 months and will then move onto the Land Based Service Technician Level 3 which will take 12 months to complete
College will be on block release and you will be required to stay away from home
Training Outcome:
Once you have completed your apprenticeship you will be required to continue your development programme with the Company in order to become a fully qualified Plant Engineer
Employer Description:Clee Hill Plant Limited is a leading construction plant hire company and the largest compaction and surface dressing hire company in the UKWorking Hours :Monday - Friday, 8.00am - 4.30pmSkills: Communication skills,Attention to detail,Organisation skills,Analytical skills,Logical,Team working,Initiative,Patience....Read more...
The role will involve undertaking service and maintenance tasks under the direct supervision of an experienced mentor commensurate with experience and level of training. You will gain experience with a dedicated mentor who will help build up your knowledge on electrics, hydraulics, engines and systems. You will be working on a variety of Plant Machinery such as JCB's to Bomag Rollers. Training:You will be working towards your Land Based Service Engineer Level 2 which takes 24 months and will then move onto the Land Based Service Technician Level 3 which will take 12 months to complete.
College will be on block release and you will be required to stay away from home.Training Outcome:Once you have completed your apprenticeship you will be required to continue your development programme with the Company in order to become a fully qualified Plant Engineer.Employer Description:Clee Hill Plant Limited is a leading construction plant hire company and the largest compaction and surface dressing hire company in the UKWorking Hours :Monday to Friday, 8:00am to 4:30pm.Skills: Communication skills,Attention to detail,Organisation skills,Analytical skills,Logical,Team working,Initiative,Patience....Read more...
The role will involve undertaking service and maintenance tasks under the direct supervision of an experienced mentor commensurate with experience and level of training. You will gain experience with a dedicated mentor who will help build up your knowledge on electrics, hydraulics, engines and systems. You will be working on a variety of Plant Machinery such as JCB's to Bomag Rollers. Training:You will be working towards your Land Based Service Engineer L2 which takes 24 months and will then move onto the Land Based Service Technician Level 3 which will take 12 months to complete.
College will be on block release and you will be required to stay away from home.Training Outcome:Once you have completed your apprenticeship you will be required to continue your development programme with the Company in order to become a fully qualified Plant Engineer.Employer Description:Clee Hill Plant Limited is a leading construction plant hire company and the largest compaction and surface dressing hire company in the UKWorking Hours :Monday to Friday, 8:00am to 4:30pm.Skills: Communication skills,Attention to detail,Organisation skills,Analytical skills,Logical,Team working,Initiative,Patience....Read more...
Air Conditioning Engineer - Prestigious Contract in London - Up to £48,000Exciting role to join a Leading National Maintenance Service provider that is looking to expand its operation and bring in a specialised Commercial Air Conditioning & Refrigeration engineer to supply this service to a high-end mixed-use commercial contract in and around the Mayfair and Belgravia area.You will be joining their current mobile maintenance team working across various high-end buildings carrying out Service and Breakdowns on Air conditioning, HVAC and refrigeration plant. You will be responsible for all commercial Air conditioning maintenance as well as general building services. Hours of Work Monday - Friday 08:00 am -17:00 pm. BenefitsBasic Salary of up to £48,000CalloutVan & Fuel cardMonday to Friday 08.00 – 17.0025 days holiday + Bank HolidaysFull company uniformPDA and Mobile phonePensionLife AssuranceEmployee Shares SchemesReward programme & Employee programmeEmployee discounts.RequirementsNVQ Level 2 in Refrigeration & Air conditioning (Minimum)NVQ Level 3 in Refrigeration & Air conditioning (Desirable)Fgas 2079 Cat 1 (Essential)Experience within a Maintenance / Facilities Management environment.Knowledge of Health & Safety, Permit to Work procedures and safe systems of working.Capability to perform manual tasks, including manual handling, working at heights and in confined spacesOn-Call Rota.Good verbal and written communication is important, including the ability to use a mobile device.Self motivated and solutions focussed with the ability to work without supervision but also enjoy working as part of a team.Full Drivers LicenseResponsibilitiesPPM & Reactive maintenanceAir conditioning and refrigeration - Service/maintenanceYour main duties will be service and maintenance on split systems, VRV's, VAV's and VRF's, AHU's, FCU's, Chillers and all HVAC and refrigeration plant.Electrical Knowledge would be beneficial.Extensive building services knowledgePlease send your CV today to Archie Reed at CBW Staffing Solutions to avoid missing the opportunity....Read more...
.NET Software Engineer - Global Phenomenon – Amsterdam, Netherlands
(Tech stack: .NET Software Engineer, .NET 8, C#, Azure, Angular 17, Multithreading, RESTful, Web API 2, JavaScript, Programmer, Full Stack Developer, Architect, Ontwikkelaar, .NET Software Engineer)
Our client has created a global phenomenon, connecting people online to unique travel experiences, in more than 60,000 cities and 180 countries. As they approach their 10th anniversary they are looking to produce a revolutionary set of products and services that will transform the travel industry beyond recognition.
For our client, engineering isn't just a job but a practice that they want to perfect. They aim to keep their systems modular, their code clean, and their documentation clear, and they follow the idea of leaving things better than how you found it. It's not just about the code — putting the right processes and tools in place to make developers happy and efficient is important to our client because it gives their .NET Software Engineer the time to focus on polishing the product.
Working on a new payment solution, you will be given the opportunity to operate at all levels of the stack: the UIs that allow people all over the world to pay and get paid in their locally preferred methods, the APIs and processor integrations to send payment instructions to their wide network of partners, the offline reporting and reconciliation pipelines that ensure financial data integrity and allow the business to operate, and more.
We are seeking .NET Software Engineer with a strong grasp of object orientated development principles and sound knowledge of: .NET, .NET Core / ASP.NET MVC, C# and SQL Server. You will receive industry recognized training in all aspects of: .NET 8, Azure, Angular 17, Solid, DRY, LINQ, multithreading, Microservices, RESTful, Web API 2, JavaScript, HTML5, Agile and SQL Server 2022.
Our client offers a structured career progression programme. It’s common place for developers within their firm to receive their first promotion (and pay rise!) within 6 months of joining.
All positions come with the following benefits:
Company shares
Bonus (typically 20%)
Quarterly employee travel coupon
Community involvement (4 hours per month to give back to the community)
Much more...
No global movement springs from individuals. It takes an entire team united behind something big. Together, they work hard, they laugh a lot, they brainstorm nonstop, they use hundreds of Post-Its a week, and they give the best high-fives in town. If you are interested in being a part of this movement please apply today!
Location: Amsterdam, Netherlands / Remote WorkingSalary: €4.000 - €6.000 Per Month + Bonus + Benefits
Applicants must be based in the Netherlands and have the right to work in the Netherlands even though remote working is available.Noir continues to be the leading Microsoft recruitment agency; we can help you make the right career decisions!
NOIRNETHERLANDSRECSP1NOIRNETHERLANDSRECNOIREUROPERECNC/BK/AMS0406....Read more...
Medical Devices Consultant – Senior Mechanical Engineer – Cambridge
Due to the growth of a leading Medical Devices organisation, we are currently seeking a Senior Mechanical Engineer, Project Manager, Medical Devices Inventor, or Mechanical Design Consultant for a newly approved role. The company is based in Cambridge and boasts some of the most impressive labs globally, which they are currently enhancing even further.
You will collaborate with other experts in Medical Devices who have backgrounds in Mechanical Engineering, Mechanical Design, Electronics Design, Electronics Engineering, Physical Engineering, Biomedical Sciences, and various other skills essential for inventing Medical Technology. Consequently, teamwork will be crucial.
In this role, you will lead projects, necessitating experience as a consultant, project manager, or another role involving interactions with third parties. Additionally, you will apply your skills hands-on, directly contributing to the development of new Medical Devices.
We require several years of experience in Mechanical Design of Medical Devices. Familiarity with any 3D CAD tool is acceptable, as we understand that you can be trained on the necessary tools when required. However, knowledge of SolidWorks would be advantageous.
Most individuals in similar roles hold a degree in a Mechanical Engineering field, but experience takes precedence.
In terms of experience, we welcome candidates ranging from those stepping up to a Senior Mechanical Engineer role to individuals with several years of experience as a Medical Devices Consultant or Senior Mechanical Engineer.
This organisation has an outstanding track record of fostering continuous learning to keep you at the forefront of the Medical Devices sector. Consequently, opportunities for career and skills development are always available.
In addition to these benefits, you will receive an excellent salary (commensurate with your level of experience), a substantial bonus, a generous pension plan, healthcare coverage, complimentary meals throughout the day, life assurance, access to social clubs, wellness programs, an onsite gym, and other exceptional perks that are not commonly offered by most companies.
We anticipate substantial interest in this role, so if you are interested, we recommend submitting your application promptly. The organisation is open to candidates with varying levels of experience. If you possess some of the required skills but not all, it may still be worth applying as training could be provided (though you must have industry experience as a Mechanical Engineer or Mechanical Designer for Medical Devices as a minimum).
For more information, please feel free to call Andrew Welsh, Director of Medical Devices Recruitment and Scientific Recruitment Specialist at Newton Colmore, at +44 121 268 2240. Alternatively, you can submit an application, and a member of our team at Newton Colmore will contact you.
Newton Colmore Consulting is a specialised recruitment company operating within the fields of Medical Devices, Scientific Engineering, Scientific Software, Robotics, Science, Electronics Design, New Product Design, Human Factors, Regulatory Affairs, Quality Assurance, and Field Service Engineering sectors.....Read more...
Successful completion of all academic studies and apprenticeship learning modules
Gaining of practical electrical and mechanical service engineer knowledge and skills across all aspects of maintenance and repair
Development of effective fault diagnosis skills from first principles
Positive client feedback regarding engagement and completion of duties
Document work completed concisely and to promptly submit service reports using the electronic service management system
To always comply with the relevant health and safety legislation and to ensure that all risk assessments & method statements and dynamic / lone working risk assessments are completed where applicable prior to commencement of work
When dealing with poorly prepared sites, proactively work with the lead engineer/client to resolve site issues and deliver a positive outcome to minimise return visits
To comply with all environmental, industry & statutory regulations
To ensure that all relevant training and certification is kept up to date and is logged with the People Team
Build and maintain awareness of all service products, customers and markets
Maintain appropriate awareness of market(s) for all LES products and services
Set up own 1-2-1 progress meetings with the Site Services Manager
Ensure company vehicle is maintained in a clean & tidy condition and that all tools & test equipment are similarly maintained - vehicles & equipment will be regularly audited
Training:Refrigeration Air Conditioning and Heat Pump Engineering Technician Level 3.
This programme is delivered via a block release delivery model; your attendance is required at our Construction Campus (NG17). This attendance is required during term time only.
You will work with expert assessors and tutors to develop new knowledge, skills and behaviours within the profession.
You will experience a blended learning model.Training Outcome:The role is mobile field based and is critical to the smooth operation of the service team.
Opportunities of further training and career progression.Employer Description:Mitsubishi Electric has introduced high quality products and innovative technologies into the UK for more than 35 years.
Throughout this time, we have maintained a firm reputation for reliability, powerful solutions and quality service, meeting the needs of today's commercial and industrial marketsWorking Hours :Shift Patterns per week 37.5 hours ‘on the tools’ and we expect 7.5 hours travel time to/from jobs; before we allow field-based engineer colleagues to claim travel or overtime. These are weekly figures. So, 45-hour week before travel can be claimed. Exact working days and hours TBCSkills: Communication skills,IT skills,Attention to detail,Organisation skills,Customer care skills,Problem solving skills,Presentation skills,Administrative skills,Number skills,Analytical skills,Logical,Team working,Initiative,Non judgemental,Patience....Read more...
Embedded Software Engineer – Biotech or Medical Devices – Cambridge
An established and growing Biotech and Medical Devices company, based in Cambridge, is currently looking for an Embedded Software Engineer to join them and take responsibility for the continued development of their software on electro-mechanical devices that are used in the biotech and medical devices sectors.
Based in Cambridge, you will be working alongside scientists, engineers, designers, physicists and other medical devices and biotech industry experts in the development this cutting-edge medical device.
Ideally, you will have worked within the Biotech or Medical Devices sectors previously and have knowledge of ISO 13485, IEC 62304 and ISO 14971.
The company has the unique ability to offer an excellent benefits package, pension, medical insurance, life assurance and some other excellent benefits alongside a competitive starting salary.
We are looking for someone to start as soon as possible and interviews will happen quickly, with this in mind, if you are interested in the role, I suggest making an application now or risk missing out.
For more information, please feel free to call Andrew Welsh, Director of Medical Devices, Biotech and Drug Discovery recruitment specialists, Newton Colmore, on +44 121 268 2240 or submit an application, and a member of our team at Newton Colmore will be in touch with you.
....Read more...
The Test Engineer will join a Systems Engineering team critical in space thruster engine development. You will work on a complex, multifaceted rocket engine system comprised of numerous newly developed and integrated components. This role has wide ranging technical input including structural, thermal, rocket propulsion, space electronics, software, testing and systems analysis.
In essence as a Senior Systems Engineer, you will coordinate and bring together the diverse sub components and sub assembles into a complete working space engine design.
My client supplies chemical propulsion rocket engines and thrusters serve to key spacecraft manufacturers for commercial, defence and scientific applications.
Requirements
Space systems experience ideally of large European space projects, system primes or ESA.
Technical leadership of large, multidisciplinary Electrical Harnessing Design, routing and schematic Mechanical and fluidic system Engineering projects.
System Analysis knowledge to apply to, fluidic systems, surge pressure and pressure drop. Performance, Structural, Thermal, Reliability, Radiation Assessment, Hazard or Safety Analysis.
Complex product development experience of thermal design and equipment selection using Failure Modes Effects and Criticality Analysis (FMECA).
Intelligent, logical approach to problem solving.
Degree, Masters or higher qualification in Engineering, Aerospace, Mechanical or Electrical Engineering.
You will own the overall engine system architecture, analysis and documentation including FMECAs, radiation, reliability, mechanical, thermal, fluidic, electromagnetic, Design, Development and Verification Plan, Design Justification Document, Software Requirements Specification, Engine Test Plan etc. Working closely with the Project Manager to help plan and organise resources.
Responsibilities
Support propulsion engine build, assembly and test development including route c....Read more...
Project Engineer - Manufacturing Design – Medical Devices - Cambridge
An exciting opportunity awaits you to join a rapidly growing Medical Devices division and contribute to the development of innovative Medical Technologies. We are seeking a Senior or Principal Project Engineer who has previously worked as a Manufacturing Engineer with experience in designing production and manufacturing systems within the Medical Devices, Biotechnology or Sciences industries.
Ideally, you will have a degree in Manufacturing, mechanical or process engineering, while having Manufacturing or Process Engineering experience designing in 3D CAD while also having a background in maintaining production machinery.
You will support design teams across multiple functions, with a particular focus on Design for Manufacturing (DFM). The role involves building prototypes and testing new rigs to ensure medical devices function correctly and can be manufactured efficiently. Supply Chain experience would be highly advantageous.
Given the size of the group, we need someone willing to engage in designing, building, and testing systems, as well as maintaining production machinery. As the group expands, this role will evolve, providing excellent opportunities for career advancement.
You will be expected to take leadership of various projects as they arise, whilst also collaborating effectively within teams depends on project requirements.
Due to working alongside other Medical Devices divisions, it is expected that you would have knowledge of ISO 13485, QMS and GMP.
In return, you will receive an excellent starting salary, free lunches, enhanced pension, bonuses, healthcare and other excellent benefits you’d expect with a much larger organisation.
Given the high demand for Medical Devices opportunities, we anticipate significant interest in this role. If you are interested, we recommend submitting your application promptly to avoid missing out.
For more information, please contact Andrew Welsh, Director of Medical Devices, Biotech and Drug Discovery Recruitment at Newton Colmore, on +44 121 268 2240. Alternatively, submit your application and a member of our team will be in touch. Please note that without a CV, we can only provide limited information.....Read more...
Deployment Engineer / IT Support Analyst – Birmingham OR London X2
9-week initial contract (5 days onsite per week in either central Brum OR London).
Inside IR35 – £270 – £290 per day (all inclusive) which may be subject to change depending on applicable legislation or solution through which services are performed.
Deployment Engineer required to work for a leading client in the London or Birmingham area. You are coming on board for an initial 9-week project to provide general IT Support as well as laptop/desktop swaps and reducing data on C drives to allow for a Windows 11 upgrade.
Key skills,
Proven experience working as a Deployment Engineer/IT Support Analyst working on project work in fast-paced environments
Skilled in laptop/desktop installation and setup of general IT hardwar
Strong track record of providing hands-on IT support and resolving user issues
Knowledge of HP, Lenovo, Apple hardware (laptops, iPhones, iPads), office telephony, and WiFi
Configuring Firmware/BIOS according to standard
Operating System tasks (installing, updating, remediating Microsoft Windows)
End point software management (installing, updating, remediating Microsoft Office)
Excellent verbal and written communication skills, with a user-focused approach
Confident engaging with stakeholders and ensuring a smooth support experience
Interested!?! Please send your up to date CV to Dean Parkes at Crimson for immediate review
Not interested?! Do you know anyone that might be? Refer a friend for this role to earn £250 worth of vouchers. http://info.crimson.co.uk/referafriend
Crimson are acting as an employment business in regards to this vacancy.
....Read more...
Maintenance Engineer (Apartment Servicing) - London - Up to £35-45,000 Plus Travel CardI have a fantastic opportunities to work for a leading maintenance company in London, working at across a portfolio of buildings behalf of a large property management company. You will carry out PPM's and reactive maintenance, statutory compliance and general building maintenance tasks within a portfolio of High End residential properties within Zones 1 & 2. My client is looking for a Maintenance Engineer with experience in High End Residential building services to work on a portfolio of High profile Buildings at carrying out maintenance on Luxury High End Residential Apartments. HoursMonday to Friday - 08:00am - 17:00pmRequirementsApprentice TrainedElectrical or Mechanical - City & Guilds Level 2 and 3 or EquivalentClient FacingHigh End Residential ExperienceCommercial Building Maintenance ExperienceAbility to work under pressure whilst remaining calm, clear thinking and able to deliver the required services to the client within given time constraints.Good Attitude and willingness to learnPackageBasic Salary of up to £35-45,000Travel - Zones 1 & 2 Paid23 Days Annual leave + Bank HolidaysPensionHealthcarePlenty of OTInternal and External Training courses Career progression - would want the engineer to develop into supervisors and above. Duties Electrical and Mechanical PPM's and Reactive maintenanceGeneral building services tasksEmergency lighting, Fire alarms, FCU's, AHU's, NVHR, HVAC plant, Water treatmentKnowledge of BMS, Chillers, Cooling plant, HIU'sWorking as part of a small maintenance team to deliver a great service to the clientEscorting Sub-contractors, Issuing permits / RAMSMy client is able to interview straight away if the right candidates are available so to avoid missing out please send your CV today to Dan Barber at CBW Staffing Solutions....Read more...
The Company:
UK manufacturer of single use medical devices
Global reach
Outstanding reputation for service and product quality
Looks after their employees
Benefits of the Validation Engineer
£45k basic salary,
Death in Service (2 x Salary),
Employer Pension @ 5% employer + 5% employee,
23 Days annual leave + bank holidays,
Health Shield - Employee Health Cash Plan,
Perkbox
The Role of the Validation Engineer
Our client is a leading medical devices manufacturer
This role is to ensure all site validation needs are met
You will be responsible for validating all production, service provision, computer and software-based processes, the result of which cannot be verified by subsequent monitoring or measurement.
Validation must demonstrate the ability of these processes to consistently achieve expected results. The role includes re-validation of established processes as well as initial validation of amended or new processes, such as those introduced through new product development activities.
Creating Validation Master Plans and associated protocols
Create or amend standard operating procedures in accordance with the results of the validation
Creating validation and related working forms
Supporting site cross-functional technical writing needs
Maintenance of Sterilisation Validation for both Gamma and Ethylene Oxide processes.
Assist in the implementation of the validation protocols and write the validation reports
Support cross-functional risk management activities
Support in the optimization of production processes
Preparation of plans for maintenance, service, calibration, re-validation and cleaning of test and production equipment
Policing and coordinating maintenance, service, calibration, re-validation and cleaning
Advise the business on current best practice in validation and keep abreast of changes
Contribute to continuous improvement projects
The Ideal Person for the Validation Engineer
Must hold a mechanical engineering or electrical engineering degree
Must have previous experience of medical device or pharmaceutical manufacturing
Must have practical experience in manufacturing technology and quality assurance
Must have understanding of Quality Management Systems for medical
Devices (EN ISO 13485, 21 CFR 820)
Experience in validation / qualification
Experience in Project Work and/or Project Management D
Good to very good knowledge of common MS Office
Programs
Able to adhere to and communicate the company values
Must have strong communication skills able to communicate with all levels of organisation
A good team player who is able to adapt to working independently or with new or short-term teams
If you think the role of Validation Engineer is for you, apply now!
Consultant: David Gray
Email: davidg@otrsales.co.uk
Tel no. 0208 397 4114
Candidates must be eligible to work and live in the UK.
About On Target
At On Target, we specialise in sales, technical and commercial jobs in the Engineering, Construction, Building Services, Medical & Scientific, and Commercial & Industrial Solutions sectors, enabling our consultants to become experts in their market sector. We place all levels of personnel, up to Director across the UK and internationally.....Read more...
C Software Engineer – Defence Sector – Cambridge
A growing Defence and Security company, based in Cambridge, is currently seeking an experienced C Software Engineer to contribute to the development of breakthrough technologies that will enhance the UK’s security against external threats.
You will have the opportunity to work on cutting-edge systems architecture, ideally utilizing past firmware and embedded software tools. The projects you will be involved in will truly mind-blowing, challenging you on a daily basis.
It would also be ideally, though not essential, if you have previous knowledge and experience in Software-Defined Radio (SDR) and Real-Time Operating Systems (RTOS). There will also be a significant amount of algorithm development, so a strong mathematical background would be advantageous in this role.
The company has recently revamped cutting-edge labs, enabling development at the forefront of the sector. This means you will be working on brand-new developments using the latest technologies available.
Knowledge of other programming languages such as C++, MATLAB, or Python will also be required.
As this role involves working in the defence and security sectors, you will need to be able to obtain (or already hold) security clearance. If you have previous experience in the defence and security field and hold security clearance, this would be highly advantageous.
In addition to working within a growing company on some of the most fascinating projects, you will also be rewarded with an excellent starting salary (based on level of experience), bonuses, enhanced pensions, healthcare, gym membership, free lunches, and other excellent benefits you would expect from a larger organisation.
If you believe you are well-suited for this role, I suggest submitting an application now to avoid missing out on this career opportunity.
For more information, please feel free to call Andrew Welsh, Director of Medical Devices Recruitment and Scientific Recruitment Specialists Newton Colmore, on +44 121 268 2240, or submit an application, and one of our team members at Newton Colmore will contact you.
....Read more...
Engineer Surveyor – Cranes & Lifting Equipment Total package circa £55K with a basic of £40.5-£42.5KAre you an engineer with experience of maintaining, servicing, or inspecting any type of lifting equipment or cranes? Are you interested in a career with a huge test, inspection and certification company with over a hundred and fifty years of history?You will be rewarded with an extensive benefits package and have over £55,000 training invested in you within the first 12 months. In addition, you will receive a basic between £40.5K-£42.5K (rising to £45.5K after 12 months service and £50.5K after 24 months ) with 10% contributory pension, yearly bonus and £5.5K car allowanceThe CompanyServicesA SAFED and UKAS accredited world leading professional services company who support businesses with quality & compliance and carry out high quality inspections ensuring pressure equipment is compliant with current regulatory and statutory requirements. SectorsAerospace, Manufacturing, Forces, Commercial, Automotive, Marine, Utilities, Industrial, NuclearLocationCoventryEngineer Surveyor Package:Getting you to work
Company Car Allowance (£5.5K)
Advancing your career
Step up from the tools into a professional engineering environmentMinimum £55,000 training investment in you for the first 12 monthsUp to 12 week modular training programme with a blend of classroom and practical learningSupport with professional membership including renewal fees paidCareer Ladder with 5 different career options
Securing your future
Employer pension contribution 7.5% increasing to 10% with a 2.5% employee contributionCompany wide bonusAnnual review
Work life balance
33 days holiday including statutory holidays the ability to buy and sell extra days45 hour flexible working week which allows homelife balanceWorking week paid door to door with vast opportunities for overtime which is not mandatoryHome based roleCentralised diary management team assist in booking your appointments
Looking after your family
Life cover of 2 times salary
Engineer Surveyor Main Accountabilities:
Inspection and certification of lifting equipment & cranesWorking to LOLER and PUWER regulationsManaging diary and clients with patchMaintaining client relationshipsFull Technical Specialist SupportOperate within agreed authorities, inspection and H&S standardsClear customer focus and drive to achieve optimal service delivery
Qualifications Knowledge, Skills and Experience:
HNC or Level 4 qualification equivalent or above in any engineering discipline Hands on experience of fixing, inspecting, maintaining, repairing or servicing any lifting equipment or cranes UK Driving licenceCustomer facing skills
Engineer Surveyor – Cranes & Lifting Equipment Total package circa £55K with a basic of £40.5-£42.5K....Read more...
Engineer Surveyor – Cranes & Lifting Equipment Total package circa £55K with a basic of £40.5-£42.5KAre you an engineer with experience of maintaining, servicing, or inspecting any type of lifting equipment or cranes? Are you interested in a career with a huge test, inspection and certification company with over a hundred and fifty years of history?You will be rewarded with an extensive benefits package and have over £55,000 training invested in you within the first 12 months. In addition, you will receive a basic between £40.5K-£42.5K (rising to £45.5K after 12 months service and £50.5K after 24 months ) with 10% contributory pension, yearly bonus and £5.5K car allowanceThe CompanyServicesA SAFED and UKAS accredited world leading professional services company who support businesses with quality & compliance and carry out high quality inspections ensuring pressure equipment is compliant with current regulatory and statutory requirements. SectorsAerospace, Manufacturing, Forces, Commercial, Automotive, Marine, Utilities, Industrial, NuclearLocationOxfordEngineer Surveyor Package:Getting you to work
Company Car Allowance (£5.5K)
Advancing your career
Step up from the tools into a professional engineering environmentMinimum £55,000 training investment in you for the first 12 monthsUp to 12 week modular training programme with a blend of classroom and practical learningSupport with professional membership including renewal fees paidCareer Ladder with 5 different career options
Securing your future
Employer pension contribution 7.5% increasing to 10% with a 2.5% employee contributionCompany wide bonusAnnual review
Work life balance
33 days holiday including statutory holidays the ability to buy and sell extra days45 hour flexible working week which allows homelife balanceWorking week paid door to door with vast opportunities for overtime which is not mandatoryHome based roleCentralised diary management team assist in booking your appointments
Looking after your family
Life cover of 2 times salary
Engineer Surveyor Main Accountabilities:
Inspection and certification of lifting equipment & cranesWorking to LOLER and PUWER regulationsManaging diary and clients with patchMaintaining client relationshipsFull Technical Specialist SupportOperate within agreed authorities, inspection and H&S standardsClear customer focus and drive to achieve optimal service delivery
Qualifications Knowledge, Skills and Experience:
HNC or Level 4 qualification equivalent or above in any engineering discipline Hands on experience of fixing, inspecting, maintaining, repairing or servicing any lifting equipment or cranes UK Driving licenceCustomer facing skills
Engineer Surveyor – Cranes & Lifting Equipment Total package circa £55K with a basic of £40.5-£42.5K....Read more...
Engineer Surveyor – Cranes & Lifting Equipment Total package circa £55K with a basic of £40.5-£42.5KAre you an engineer with experience of maintaining, servicing, or inspecting any type of lifting equipment or cranes? Are you interested in a career with a huge test, inspection and certification company with over a hundred and fifty years of history?You will be rewarded with an extensive benefits package and have over £55,000 training invested in you within the first 12 months. In addition, you will receive a basic between £40.5K-£42.5K (rising to £45.5K after 12 months service and £50.5K after 24 months ) with 10% contributory pension, yearly bonus and £5.5K car allowanceThe CompanyServicesA SAFED and UKAS accredited world leading professional services company who support businesses with quality & compliance and carry out high quality inspections ensuring pressure equipment is compliant with current regulatory and statutory requirements. SectorsAerospace, Manufacturing, Forces, Commercial, Automotive, Marine, Utilities, Industrial, NuclearLocationReadingEngineer Surveyor Package:Getting you to work
Company Car Allowance (£5.5K)
Advancing your career
Step up from the tools into a professional engineering environmentMinimum £55,000 training investment in you for the first 12 monthsUp to 12 week modular training programme with a blend of classroom and practical learningSupport with professional membership including renewal fees paidCareer Ladder with 5 different career options
Securing your future
Employer pension contribution 7.5% increasing to 10% with a 2.5% employee contributionCompany wide bonusAnnual review
Work life balance
33 days holiday including statutory holidays the ability to buy and sell extra days45 hour flexible working week which allows homelife balanceWorking week paid door to door with vast opportunities for overtime which is not mandatoryHome based roleCentralised diary management team assist in booking your appointments
Looking after your family
Life cover of 2 times salary
Engineer Surveyor Main Accountabilities:
Inspection and certification of lifting equipment & cranesWorking to LOLER and PUWER regulationsManaging diary and clients with patchMaintaining client relationshipsFull Technical Specialist SupportOperate within agreed authorities, inspection and H&S standardsClear customer focus and drive to achieve optimal service delivery
Qualifications Knowledge, Skills and Experience:
HNC or Level 4 qualification equivalent or above in any engineering discipline Hands on experience of fixing, inspecting, maintaining, repairing or servicing any lifting equipment or cranes UK Driving licenceCustomer facing skills
Engineer Surveyor – Cranes & Lifting Equipment Total package circa £55K with a basic of £40.5-£42.5K....Read more...
Quality Engineer, PPC
Role Overview:
The Quality Engineer is responsible to the HSQE Manager for the effective testing and measuring of products, and recording the results of the inspection activities.
The Quality Engineer will assist in the maintenance of the Integrated Management System, and Create and maintain company quality documentation, such as procedures, work instructions, quality alerts and forms.
The Quality Engineer will be highly competent in the mechanical and electrical testing of electromechanical rotating devices with expertise in various precision measuring tools and electrical testing through insulation, electrical noise and voltage drop and also visual detection of surface defects such as nicks, burrs, pits, and scratches.
The role is based in High Wycombe. Off-site visits are not expected but may be required to support activities at customer and supplier sites as required by the business needs.
Key Responsibilities:
Maintain excel spreadsheets for supplier rejection, corrective action reporting and customer returns data.
Support the receipt, recording, investigation and analysis of customer returned products (e.g., RMA’s & 8D’s).
Create and maintain company quality documentation, such as procedures, work instructions, quality alerts and forms.
Investigate instances of product and process failure, conduct effective root cause analysis-implement robust corrective actions with proven problem-solving techniques such as 8D and 5Y.
Conduct internal quality management system audits and product and process audits.
Participation in QA project as direct.
Assist with resolving certification issues with suppliers, stockist, test house, mill in a timely manner.
Excellent understanding of metrology and testing practices for both mechanical and electrical inspection and testing, with particular application for slip rings desirable.
Follow inspection standards and sign-off documentation requirements to ensure consistency of the application of measurement and reporting methods for communication to the customers and end users.
Perform mechanical and electrical inspection and testing of, incoming components, finished products and sub-assemblies throughout the manufacturing process as required.
Execution of the company 5S policy and relevant health and safety or environmental policies to maintain a safe working environment.
Support the investigation of concerns, both external and internal, including quarantined parts and customer rejects, ensuring that root cause is adequately identified for counter measure implementation.
Maintain information relating to departmental and process KPIs to assess ongoing performance.
Support relevant risk assessments of processes and tasks within the department.
Further Responsibilities and Skills Include:
The Quality Engineer will be the interface between the manufacturing and testing of Pandect’s products and as such requires exceptional interpersonal skills as well as an ability to prioritise workload effectively to meet the demands of the business.
Able to accurately read interpret and follow CAD / technical drawings
Effective communication and time management skills.
Good computer literacy skills (esp. Microsoft Excel and Word).
Adept at the creation of reports and documentation.
Mechanical/Electrical/Electronical Engineering Degree
Experienced in problem solving methodologies (A3, 8D) (desired)
Knowledge and understanding of ISO 9001:2015. (desired)
Experienced in Lean methodologies (5S, Visual Management etc.) (desired)
Confident communicator, fluent in spoken and written English
....Read more...
.NET Software Engineer
(Tech stack: .NET Software Engineer, Senior Software Developer, .NET 8, Angular, C#, .NET Core, .NET, MS SQL, HTML, CSS, Azure, Visual Studio)
Are you ready to join a forward-thinking, award-winning Software House that's redefining how businesses operate through innovative, AI-powered solutions? Headquartered in Texas but hiring across the U.S., our client is on the hunt for a talented .NET Software Engineer to join their fully remote team.
You’ll be part of a collaborative, fast-paced environment where modern tech, clean architecture, and continuous improvement drive everything we do. If you enjoy crafting high-quality applications using Angular, TypeScript, C#, .NET Core, and Azure, this is your chance to make a real impact.
What’s in it for you?
100% remote work – work from anywhere in the U.S.Competitive salary & performance-based bonusesMedical, dental, and vision insurance401(k) with company matchGenerous PTO and paid holidaysAnnual training allowance to support your growthA supportive team that values innovation and continuous improvement
What You'll Do:
Leverage AI tools to streamline and enhance your development workflowTackle challenges with the precision and intensity of a cat chasing a laser pointerBuild modern web applications using Angular, TypeScript, and .NET CoreCollaborate cross-functionally to solve real-world problems and improve performanceProactively refine processes for smoother delivery and better outcomesStay curious, always learning and pushing boundaries in your development journey
What You'll Bring:
Strong experience with Angular, TypeScript, HTML, C#, and .NET CoreSolid understanding of Azure services and cloud-based architectureA problem-solving mindset and a passion for clean, maintainable codeEnthusiasm for collaboration and sharing knowledgeA desire to grow, evolve, and stay ahead in the ever-changing tech landscape
Location: USA / Remote Working
Salary: $90,000 - $120,000 + Bonus + Benefits
Applicants must be based in the USA and have the right to work in the USA even though remote working is available.
Noir continues to be the leading Microsoft recruitment agency; we can help you make the right career decisions!
NOIRUSANETREC
NOIRUSAREC....Read more...
Quality Engineer – Cambridge – Medical Devices
We are currently looking for a Quality Engineer for a growing Medical Devices organisation based in Cambridge. The company work on a range of different Medical Devices, providing a variety of projects and tasks in your role.
You will collaborate various Medical Devices experts, including Mechanical Engineers, Physicists, Electronics Engineers, Software Engineers, and other professionals. Your primary focus will be on Quality Assurance of Medical Devices to ISO 13485 standards, although knowledge of EN 60601 would also be advantageous.
Your responsibilities will include creating technical files and testing documentation. If you have experience of Design Assurance, this would also enhance your approach to this work.
We would expect you to have a degree that led you into a Medical Devices Quality Engineering career. However. if you have another route into a Medical Devices role, we would still be keen to hear from you.
In addition to working on various Medical Devices, you will be rewarded with an excellent starting salary, a bonus, a generous pension, life assurance, healthcare, and other excellent benefits.
Given the anticipated interest in this role, if you are looking for a new opportunity, I suggest making an application now to avoid missing out.
For more information, please feel free to call Andrew Welsh, Director of Medical Devices recruitment, Science recruitment and Biotech recruitment specialists Newton Colmore Consulting, on +44 121 268 2240 or make an application and one of our team at Newton Colmore Consulting will contact you.....Read more...
Senior Azure Engineer Kingston upon Thames (hybrid working – 3 days per week onsite)
Up to £80k
A cutting-edge software business is looking for a Senior Azure Engineer to join their Service Delivery team. This is a hybrid role perfect for someone who thrives in solving complex cloud-related issues, enjoys automation and wants to take ownership of systems running in a modern Azure-based B2B environment.
Responsibilities:
• Troubleshoot and resolve escalated cloud and application support issues
• Monitor Azure resources and maintain dashboards, alerts and system health
• Write and optimise SQL queries for data investigation and correction
• Develop tools and scripts in C# to automate support tasks
• Collaborate with Dev and 1st/2nd Line teams to deliver end-to-end issue resolution
• Manage and optimise Azure infrastructure, performance and costs
Requirements:
• Solid experience in a 3rd Line Support or similar cloud-focused role
• Strong working knowledge of Microsoft Azure, Azure Monitor and resource management
• Advanced SQL scripting and data manipulation skills
• Hands-on C# coding/debugging abilities
• Experience supporting cloud-hosted B2B applications
• Clear, confident communication and a solutions-focused mindset
• Familiarity with Azure DevOps, CI/CD pipelines, or infrastructure-as-code (e.g., Terraform)
• Experience with ITIL practices and hybrid cloud environments (AWS/GCP)
....Read more...
