JOB DESCRIPTION
The Process Engineer is responsible for evaluating and improving processes within Stonhard manufacturing operations. Additionally, the Process Engineer is responsible for implementation of continuous improvement initiatives, capital project support, production efficiency, maintenance process improvements, and equipment reliability.
Essential Functions
Lead root cause analysis for process failures. Develop and maintain standard work instructions. Develop and maintain Process Failure Mode Effect Analysis for areas of responsibility. Improves production line efficiency to show a measurable increase in OEE. Support maintenance in equipment troubleshooting. Working knowledge of I/O, PLC, and 24V controls is preferred. Programming a plus. Experience with Manufacturing Execution Systems preferred. Design and coordinate fabrication of manufacturing support components. Support day-to-day production operations. Re-engineer existing equipment to meet new optimization, reliability, safety, throughput, and process requirements. Evaluate and make recommendations, which will increase output and decrease costs by addressing/improving workflow, ergonomics, time/motion characteristics, cycle-times, set-up times, waste, etc. Confer with management and general staff to implement plans and recommendations. Ensure CI project goals are met and sustained through the development of effective control plans. Ensure Continuous Improvement processes and procedures are followed and adhered to through auditing and process confirmation practices. Lead C.I. initiatives in areas of 5S, Waste Reduction, Value-Stream Mapping, etc. Ensure appropriate validations are completed as part of solution implementation. Downtime Loss Analysis and Reduction - Start-up & Changeovers downtime improvement Equipment failure (Structured failure analysis 5W's, Fishbone analysis)
Minimum Requirements
Bachelor's degree in engineering Lean and/or Six Sigma preferred but not required. Minimum 5 years of manufacturing experience preferably in a GMP environment.
Physical Requirements
While performing the duties of this position, the employee is regularly required to use hands to finger, handle, or feel and talk or hear. The employee is frequently required to stand; walk and reach with hands and arms. The employee is occasionally required to sit; stoop, kneel, crouch, or crawl. The employee must regularly lift and /or move up to 10-25 pounds; frequently lift and/or move up to 50 pounds. Specific vision abilities required by this job include close vision, color vision, peripheral vision, depth perception and ability to adjust focus.Apply for this ad Online!....Read more...
We are seeking an exceptional Principal Systems Engineer to join a pioneering team developing next-generation in-space systems. This is an exciting opportunity to contribute to complex space missions, including full spacecraft lifecycle development from concept through prototyping, detailed design, integration, testing, launch, and operations.
About the Role
As Principal Systems Engineer, you will provide expert insight, practical problem-solving, and technical leadership across multiple flight development programmes. You will work closely with colleagues and partners across Europe to establish robust system architectures, define clear requirements, and enable innovative satellite servicing missions.
You will draw on your breadth of experience developing complex systems within budget and on schedule, bringing passion for space systems engineering, whether across large or small space missions, or other technically challenging projects.
Key Responsibilities
- Define system architecture for spacecraft, interfacing with all subsystem leads, external partners, and key suppliers
- Perform analysis and modelling of spacecraft systems
- Manage development schedules, system requirements, and design budgets
- Guide systems engineering processes and facilitate technical trades across disciplines
- Control and trade-off platform systems budgets (mass, power, data, fuel)
- Perform top-level mission analysis and support the development of internal tools
- Produce mission-level test and verification plans, FMECA, and FDIR
- Coordinate rapid feasibility studies into different scenarios and architectures
- Maintain configuration control of systems work and documentation
- Support proposal writing from a systems engineering perspective
Qualifications & Experience
- 9+ years of systems engineering experience across the full spacecraft lifecycle
- Proven leadership and collaboration with space systems engineering teams
- Experience generating verification and validation plans and executing qualification campaigns
- Deep knowledge in one or more of the following:
- Spacecraft systems & avionics
- Sensors and optical systems
- Flight software development
- Orbital mechanics
- Structures and mechanisms
- Propulsion systems and fluid components
- Spacecraft operations
Desirable Skills
- Experience in startup or high-growth environments
- Experience on European-wide missions with multinational consortiums
- Understanding of the spacecraft supply chain
- Experience with both low and high budget space system development
Benefits
- Stock options
- Private healthcare (for you and your family)
- Bespoke learning & development fund
- Hybrid & flexible working
- & much more!
TT....Read more...
Im supporting a well-established engineering business in Dorset who are looking to bring in a Principal Electrical Engineer to lead the design and integration of complex electrical systems used across advanced maritime and autonomous technology.
This is a technical leadership role with real variety from distributed data acquisition systems and control solutions, through to electrical architectures for autonomous platforms and underwater systems. If you enjoy solving difficult engineering challenges and guiding a high-calibre team, this will be a great fit.
What youll be doing:
- Leading the design and development of electrical systems for complex engineering products
- Defining system architectures, component selections, power distribution schemes, and control strategies
- Producing and reviewing electrical schematics, wiring diagrams, cable assemblies, and design documentation
- Ensuring designs meet CE/UKCA, EMC, electrical safety and relevant regulatory standards
- Supporting system integration, testing, and commissioning activities
- Working closely with mechanical, software, and systems engineers to deliver fully integrated solutions
- Overseeing design reviews and ensuring technical accuracy across all outputs
- Mentoring and developing junior engineers to strengthen capability within the team
- Working with suppliers and customers to resolve technical challenges and ensure robust delivery
What Im looking for:
- Degree-qualified Electrical Engineer or similar
- Strong understanding of electrical design principles, power distribution, safety and system integration
- Experience working with electrical CAD tools
- Knowledge of CE/UKCA directives, EMC, electrical safety, and compliance requirements
- Ability to design for manufacturability, testability, and long-term reliability
- Familiarity with PLCs, motor control, industrial automation or maritime systems is a bonus
- Confident communicator with the ability to influence and lead technical discussions
- Comfortable working in a dynamic environment, managing multiple priorities
Why this opportunity stands out
Youll be involved in genuinely interesting engineering systems that operate above and underwater, autonomous technologies, advanced control architectures, and high-integrity electrical design. The role mixes hands-on technical work with leadership, innovation, and cross-disciplinary collaboration.
How to Apply
Interested? Id love to tell you more about this role call Ian Broadhurst on 07734406996 or drop me a message at ian.broadhurst@holtengineering.co.uk.....Read more...
Mechanical Maintenance Engineer - Continental Shift - Moorgate, London – £55,000 per annum My client is seeking a Mechanical Maintenance Engineer to join a busy commercial building that has 36 stories in Moorgate, London. The ideal Candidate has experiance with tenants and feels confidnet to work on their own and occasionaly with a team. Salary & Benefits£55,000 per annumSeason Ticket Loan (after 6 months’ service)Cycle to Work Scheme (after probation)Rewards Gateway platformAuto Enrolment PensionPrivate Medical Insurance – including Dental, Optical & AudioDeath in Service (x2 salary)Internal progression & training opportunitiesShift Pattern Continental Shift:4 nights, 4 off, 3 days, 3 nights, 6 off, 4 days07:00 – 19:00 / 19:00 – 07:00Key ResponsibilitiesPlanned and reactive maintenance across mechanical plant and building servicesWork on chillers, cooling towers, AHUs, FCUs, pumps, and motorsGeneral plumbing and pipework maintenanceWater treatment and temperature checksFault-finding and resolution on a range of mechanical systemsBMS monitoring and adjustmentsSupport electrical and general building services tasks where requiredEscort specialist subcontractors when neededMaintain high standards of service delivery in a client-facing environmentRequirementsMechanical qualifications (C&G / NVQ or equivalent)Strong experience in commercial building services maintenanceKnowledge of chillers, cooling towers, AHUs, FCUs, pumps, motors, and plumbingMulti-skilled with a proactive approach to fault finding and maintenanceExcellent communication and customer service skillsMust be able to start early for 07:00 shiftsIf you’re interested, please get in touch with Dylan Briggs at CBW Staffing Solutions!....Read more...
Mechanical Engineer – FM Service Provider – London (Foot Mobile) – £50,000 to £56,000 Exciting opportunity to work for an established FM service provider situated in London. CBW are currently recruiting for a Mechanical Engineer to work across seven high-end residential buildings mainly around Canary Wharf area. The successful candidate will have proven experience in mechanical systems, including pipework installation, PPMs, remedial works and fault-finding. In return, the company is offering a competitive salary of up to £56,000, overtime and further technical training. Package & Working Hours£50,000 – £56,000 (depending on experience)Overtime availableMonday to Friday, 08:00 – 17:0025 days holiday + bank holidaysFurther mechanical training and developmentCompany pensionKey ResponsibilitiesCarrying out mechanical PPMs across building systems.Attending call-outs and troubleshooting mechanical plant faults.Completing mechanical remedial works and minor installations.Pipework installation and modification works as required.Servicing and maintaining a range of mechanical plant including:Air dirt separatorsStrainers (removal and cleaning)Valves (exercising and testing)Expansion vessels (drain and flush)Plate heat exchangers (flushing and cleaning)Fault finding, plant resets, and restoring service during system failures.Providing clear service reports and communicating recommendations.RequirementsProven mechanical background with strong pipework installation skills.Experience carrying out mechanical PPMs, repairs and fault-finding.Knowledge of mechanical building services plant and distribution systems.Strong problem-solving abilities and ability to work independently.Excellent communication and customer-facing skills.If you are interested in this role please contact Charlie Long from CBW Staffing Solutions!....Read more...
We are seeking an experienced and dedicated Electrical Testing Engineer to join our team. The successful candidate will perform both static and dynamic electrical tests on a wide range of equipment, from Low Voltage (LV) to High Voltage (HV) systems. This role demands a proactive individual who prioritizes safety, quality, and customer service in every task.
Key Responsibilities:
Conduct static and dynamic electrical tests on rotating plant systems from LV to HV.
Oversee and maintain electrical test records and reports to the highest standards.
Maintain company brand materials and working spaces, ensuring they are kept to high standards.
Deliver outstanding customer service by addressing enquiries and assisting with any customer complaints.
Qualifications, Experience and Personal Attributes:
A Higher National Certificate (HNC) in Electrical Engineering is preferred.
Proven experience working with large rotating plant systems.
Extensive knowledge of motor and generator testing methods, including static and dynamic loading.
Strong fault-finding and problem-solving abilities.
Excellent communication skills and a commitment to maintaining high safety and quality standards.....Read more...
An exciting opportunity for an experienced Senior RF Design Engineer to join a leading technology and engineering company specialising in advanced communication and defence systems. You will play a key role in designing and developing high-performance RF systems used across defence, aerospace, and critical infrastructure sectors.
Key Responsibilities
Design and develop RF systems, including transmitters, receivers, filters, and amplifiers.
Work on schematic capture, PCB layout, and RF simulation (Altium and similar tools).
Support product testing, troubleshooting, and design verification.
Collaborate with multi-disciplinary engineering teams throughout the product lifecycle.
Mentor junior engineers and contribute to continuous process improvement.
Key Skills
Proven experience in RF design and development (amplifiers, filters, or transceivers).
Strong knowledge of RF simulation tools and PCB design software.
Practical experience testing and troubleshooting prototypes.
Degree in Electronics, Electrical Engineering, or equivalent.
Eligible for UK Security Clearance (British Citizenship required).
Why Join
Competitive salary and bonus structure.
Hybrid working and career development opportunities.
Work on cutting-edge technology that supports national security and innovation.....Read more...
We are seeking an experienced and dedicated Electrical Testing Engineer to join our team. The successful candidate will perform both static and dynamic electrical tests on a wide range of equipment, from Low Voltage (LV) to High Voltage (HV) systems. This role demands a proactive individual who prioritizes safety, quality, and customer service in every task.
Key Responsibilities:
Conduct static and dynamic electrical tests on rotating plant systems from LV to HV.
Oversee and maintain electrical test records and reports to the highest standards.
Maintain company brand materials and working spaces, ensuring they are kept to high standards.
Deliver outstanding customer service by addressing enquiries and assisting with any customer complaints.
Qualifications, Experience and Personal Attributes:
A Higher National Certificate (HNC) in Electrical Engineering is preferred.
Proven experience working with large rotating plant systems.
Extensive knowledge of motor and generator testing methods, including static and dynamic loading.
Strong fault-finding and problem-solving abilities.
Excellent communication skills and a commitment to maintaining high safety and quality standards.....Read more...
An exciting opportunity for an experienced Senior RF Design Engineer to join a leading technology and engineering company specialising in advanced communication and defence systems. You will play a key role in designing and developing high-performance RF systems used across defence, aerospace, and critical infrastructure sectors.
Key Responsibilities
Design and develop RF systems, including transmitters, receivers, filters, and amplifiers.
Work on schematic capture, PCB layout, and RF simulation (Altium and similar tools).
Support product testing, troubleshooting, and design verification.
Collaborate with multi-disciplinary engineering teams throughout the product lifecycle.
Mentor junior engineers and contribute to continuous process improvement.
Key Skills
Proven experience in RF design and development (amplifiers, filters, or transceivers).
Strong knowledge of RF simulation tools and PCB design software.
Practical experience testing and troubleshooting prototypes.
Degree in Electronics, Electrical Engineering, or equivalent.
Eligible for UK Security Clearance (British Citizenship required).
Why Join
Competitive salary and bonus structure.
Hybrid working and career development opportunities.
Work on cutting-edge technology that supports national security and innovation.....Read more...
About YouDo you want to work on meaningful projects? Do you want to solve unique challenges and develop your engineering skills? Are you ready to make a lasting impact? If so, read on... We're looking for a motivated and talented Engineer to join our team to support our work resolving ground and building instability, subsidence throughout the UK and address the impact of historic coal and metal mines.Every voice matters here - and every project has a purpose. To be considered for the Senior Civil Engineer role, you must hold Chartered status, working towards chartership or equivalent industry experience. If you're not yet Chartered, don't worry - join us as a Civil Engineer and we'll support your journey to becoming a Senior Civil Engineer through a structured progression plan. The salary for a Civil Engineer will be £45,551.85 and a Senior Civil Engineer £49,133.22.About The RoleWe're looking for a Civil Engineer or Senior Civil Engineer who: is passionate about using their skills to make a differencehas design experience in civil engineering, structural, geotechnical or mining related fieldcan minimise environmental impact and champion sustainability We believe it's important to understand the sites we're working on, so our Engineering team regularly visit remote sites across the UK. A valid UK driving licence is required for this role due to essential travel responsibilities. We are committed to making reasonable adjustments where possible. We don’t expect candidates to meet every single desired qualification. If your experience looks a little different from what we've identified and you think you can bring value to the role, we'd love to learn more about you!To find out more about the role, take a look at the job description. Role location: Hybrid working (on average 2 days working out of our Mansfield office) Schedule:Application closing date: 30th November 2025Sifting date: 1st and 2nd December 2025Interviews: w/c 8th December(If you are unavailable on these interview dates, please make us aware and we will look at alternative dates)Security:Successful candidates must pass basic security checks and will be subject to UK Immigration requirements.About Mining Remediation AuthorityOur benefits:
A cutting-edge pension scheme with an impressive employer contribution rate of approximately 28.97%.Experience our values-based recognition scheme that celebrates your contributions.Flexibility in working patterns, whether it's full-time, part-time, or compressed hours.Embrace flexible working arrangements tailored to your needs.Enjoy a generous holiday allowance of 27.5 days annually, plus the flexibility to add 6 extra days to that, alongside 8 public holidays.Benefit from a comprehensive parental leave policy with 26 weeks of full pay (subject to eligibility).Get support to further your professional qualifications and payment for one annual professional subscription.Access a free, confidential Employee Assistance Programme to support your well-being.Unlock exclusive employee discountsEnsure your well-being with an annual health check and receive £15 monthly towards well-being activities.Enjoy the convenience of on-site free parking, along with complimentary tea, coffee, and soft drinks at our Mansfield office.Working with us:We offer different ways to work flexibly, and the following types of flexibility are usually possible: job share, flexible hours, working from home for part of the week and compressed hours. Please feel free to talk about what flexibility means to you at your interview.With a genuine commitment to flexible working, we believe that work life balance is incredibly important.Who we are:Here at the Mining Remediation Authority, we really are a great team to work with. We’re united in our passion and commitment to make a better future for people and the environment in mining areas.We carry out a wide variety of essential services from responding to coal mining hazards, to keeping everyone and everything safe from mine water pollution.We are excited about what our future holds. Our work is helping to develop a new sustainable source of renewable energy for the UK. By harnessing the energy from mine water heat, we hope to play a key role towards helping the UK to meet net-zero emissions by 2050.We truly are a supportive organisation where we all live and breathe our values. We are inclusive, trusted and progressive in everything that we do.Equality, Diversity and Inclusion:We’re proud to be an inclusive employer and are committed to building a workforce that reflects the diversity of the communities we serve. We welcome applications from individuals of all backgrounds and identities, and we actively promote equality of opportunity throughout our recruitment process.As part of our commitment to inclusive recruitment, we offer a guaranteed interview to applicants who meet the minimum selection criteria and identify as disabled or from a minority ethnic background, this aligns with our values.We recruit based on your skills, experience and potential not your ethnicity, background, gender identity, sexual orientation, or any other protected characteristic. To help ensure fairness, we anonymise applications by asking you to remove personally identifiable information before they are reviewed by hiring managers. This helps us reduce unconscious bias and focus solely on what matters, your ability to succeed in the role.If you’re successful in joining us, it’s because we believe in your ability to make a meaningful contribution. By continuing to improve the diversity of our organisation, we strengthen our collective knowledge, creativity, innovation and living our values of being trusted, inclusive, and progressive every day.If you require reasonable adjustments or an alternative format to apply, please contact us at Recruitment@MiningRemediation.gov.uk or call us on 01623 637000. We are happy to support you through the process. ....Read more...
Senior Manufacturing Engineer – Implantable Medical Devices - Cambridge
An exciting opportunity awaits you to join a rapidly growing Implantable Medical Devices division and contribute to the development of innovative Medical Technologies. We are seeking a Senior or Principal Manufacturing Engineer with experience in designing production and manufacturing systems within the Medical Devices, Biotechnology or Sciences industries.
Ideally, you will have a degree in Manufacturing, mechanical or process engineering, while having Manufacturing or Process Engineering experience designing in 3D CAD while also having a background in maintaining production machinery.
You will support design teams across multiple functions, with a particular focus on Design for Manufacturing (DFM). The role involves building prototypes and testing new rigs to ensure medical devices function correctly and can be manufactured efficiently. Supply Chain experience would be highly advantageous.
Given the size of the group, we need someone willing to engage in designing, building, and testing systems, as well as maintaining production machinery. As the group expands, this role will evolve, providing excellent opportunities for career advancement.
You will be expected to take leadership of various projects as they arise, whilst also collaborating effectively within teams depends on project requirements.
Due to working alongside other Medical Devices divisions, it is expected that you would have knowledge of ISO 13485, QMS and GMP.
In return, you will receive an excellent starting salary, free lunches, enhanced pension, bonuses, healthcare and other excellent benefits you’d expect with a much larger organisation.
Given the high demand for Medical Devices opportunities, we anticipate significant interest in this role. If you are interested, we recommend submitting your application promptly to avoid missing out.
For more information, please contact Andrew Welsh, Director of Medical Devices, Biotech and Drug Discovery Recruitment at Newton Colmore, on +44 121 268 2240. Alternatively, submit your application and a member of our team will be in touch. Please note that without a CV, we can only provide limited information.....Read more...
Senior Manufacturing Engineer – Medical Devices - Cambridge
An exciting opportunity awaits you to join a rapidly growing Medical Devices division and contribute to the development of innovative Medical Technologies. We are seeking a Senior or Principal Manufacturing Engineer with experience in designing production and manufacturing systems within the Medical Devices, Biotechnology or Sciences industries.
Ideally, you will have a degree in Manufacturing, mechanical or process engineering, while having Manufacturing or Process Engineering experience designing in 3D CAD while also having a background in maintaining production machinery.
You will support design teams across multiple functions, with a particular focus on Design for Manufacturing (DFM). The role involves building prototypes and testing new rigs to ensure medical devices function correctly and can be manufactured efficiently. Supply Chain experience would be highly advantageous.
Given the size of the group, we need someone willing to engage in designing, building, and testing systems, as well as maintaining production machinery. As the group expands, this role will evolve, providing excellent opportunities for career advancement.
You will be expected to take leadership of various projects as they arise, whilst also collaborating effectively within teams depends on project requirements.
Due to working alongside other Medical Devices divisions, it is expected that you would have knowledge of ISO 13485, QMS and GMP.
In return, you will receive an excellent starting salary, free lunches, enhanced pension, bonuses, healthcare and other excellent benefits you’d expect with a much larger organisation.
Given the high demand for Medical Devices opportunities, we anticipate significant interest in this role. If you are interested, we recommend submitting your application promptly to avoid missing out.
For more information, please contact Andrew Welsh, Director of Medical Devices, Biotech and Drug Discovery Recruitment at Newton Colmore, on +44 121 268 2240. Alternatively, submit your application and a member of our team will be in touch. Please note that without a CV, we can only provide limited information.....Read more...
Mechanical Maintenance Engineer - FM Service Provider - Healthcare Environment - Chelsea - Up to £42,261An exciting opportunity to join an established building services company based in Chelsea has arisen! CBW Staffing Solutions is currently recruiting for a Mechanical Maintenance Engineer to be based in a healthcare contract located in Chelsea. He or she will be required to carry out planned and reactive building maintenance alongside the maintenance team on-site. This would be a great opportunity for a candidate looking to expand their knowledge and progress their career within a highly reputable FM Company. In return, the company is offering a competitive salary of up to £42,261, overtime, further training, and a route into further career progression. Hours of work4 on 4 off 07:00 AM - 19:00 PMPlenty of Overtime availableKey Duties & ResponsibilitiesLighting (Small installation, Fault-finding, Lamping, etc)Emergency lighting testsControl PanelsChanging BallastBMS System - Monitor (i.e. Hot & cold)Maintain and update Log booksPlumbing - Unblocking toiletsPumps, motorsPackageSalary of £42,261Pension Scheme24 days annual leave (+ public holidays)Life Cover equivalent to 1 times annual salary24/7 Employee Assistance Program and access to mental wellbeing appEmployee discount shopping schemes on major brands and retailersGym membership discounts Cycle to work scheme Broad range of learning opportunities, such as professional qualifications, collective/individual training, and personalized support programmesRequirementsMechanically qualified - City & Guilds Level 2 Required)Legionella experience Must be able to provide copies of your trade certificatesA proven track record in commercial building maintenanceMulti-skilledGood communication skillsClient FacingIf you are interested in this opportunity please send your CV to Charlie Long of CBW Staffing Solutions for more information.....Read more...
Electrical Maintenance Engineer - Fareham, Hampshire - Up to £38,000Exciting role to join a Leading National Maintenance Service provider that is looking to expand its operation and bring in a specialised Electrical maintenance engineer in the Fareham area. You will be joining their current Electrical team working across various high-end buildings carrying out PAT testing, maintenance and repairs on electrical equipment. You will be responsible for all commercial electrical maintenance as well as general building services. Hours of WorkMonday to Friday 8am to 5pm BenefitsBasic Salary of up to £38,000Monday to Friday 8am to 5pm25 days holidayFull company uniformPensionLife AssuranceEmployee Shares SchemesReward programme & Employee programmeEmployee discounts.Overtime to boost up your earnings RequirementsBS7671 18th edition qualificationKeen eye for detailIPAF 3A & 3B (essential) Basic mechanical knowledge (Desirable but not essential) L3 Electrical 2391, at least a few years experience with electrical works, If they are also multi-skilled great but isn't essential Previous experience in the manufacturing sector (Desirable but not essential) IT literateResponsibilitiesTo undertake routine PPM tasks in accordance to recognised standardsTo undertake reactive repairs as requiredTo undertake Electrical Installation work as requiredUndertake regular inspectionsTo co-operate with other disciplines for the provision of multi-discipline services where requiredOn occassion, be available to carry out necessary emergency works outside normal hoursTo attend training to assist with contract requirementsEnsure all documentation is completed correctly for all tasks and reactive tasks are reported and recorded on to the CAFM system.To undertake tasks as instructed by on site FMPlease send your CV today to Joe Mann at CBW Staffing Solutions to avoid missing the opportunity....Read more...
Electrical Maintenance Engineer - Fareham, Hampshire - Up to £38,000Exciting role to join a Leading National Maintenance Service provider that is looking to expand its operation and bring in a specialised Electrical maintenance engineer in the Fareham area. You will be joining their current Electrical team working across various high-end buildings carrying out PAT testing, maintenance and repairs on electrical equipment.You will be responsible for all commercial electrical maintenance as well as general building services.Hours of Work:Monday to Friday 8am to 5pmBenefits:Basic Salary of up to £38,000Monday to Friday 8am to 5pm25 days holidayFull company uniformPensionLife AssuranceEmployee Shares SchemesReward programme & Employee programmeEmployee discounts.Over time to boost your earnings Requirements:BS7671 18th edition qualificationKeen eye for detailIPAF 3A & 3B (essential) Basic mechanical knowledge (Desirable but not essential) L3 Electrical 2391, at least a few years experience with electrical works. If they are also multi-skilled great, but isn't essential.Previous experience in the manufacturing sector (Desirable but not essential) IT literateResponsibilities:To undertake routine PPM tasks in accordance to recognised standardsTo undertake reactive repairs as requiredTo undertake Electrical Installation work as requiredUndertake regular inspectionsTo cooperate with other disciplines for the provision of multi-disciplinary services where requiredOn occasion, be available to carry out necessary emergency works outside normal hoursTo attend training to assist with contract requirementsEnsure all documentation is completed correctly for all tasks and reactive tasks are reported and recorded on to the CAFM system.To undertake tasks as instructed by on site FMPlease send your CV today to Bailey White at CBW Staffing Solutions to avoid missing the opportunity....Read more...
Electrical Maintenance Engineer - FM Service Provider - University - Southwark - Up to £45,000An exciting opportunity to join an established building services company based in Southwark has arisen! CBW Staffing Solutions is currently recruiting for an Electrical Engineer to be based at a University located in Southwark. He or she will be required to carry out planned and reactive building maintenance alongside the maintenance team on-site. This would be a great opportunity for a candidate looking to expand their knowledge and progress their career within a highly reputable FM Company. In return, the company is offering a competitive salary of up to £45,000, overtime, further training, and a route into further career progression. Hours of workMonday to Friday 9 am to 6 pmPlenty of Overtime availableKey Duties & ResponsibilitiesLighting (Small installation, Fault-finding, Lamping, etc)Emergency lighting testsControl PanelsChanging BallastBMS System - Monitor (i.e. Hot & cold)Maintain and update Log booksPlumbing - Unblocking toiletsPumps, motorsPackageSalary of £45,000Pension Scheme24 days annual leave (+ public holidays)Life Cover equivalent to 1 times annual salary24/7 Employee Assistance Program and access to mental wellbeing appEmployee discount shopping schemes on major brands and retailersGym membership discounts Cycle to work scheme Broad range of learning opportunities, such as professional qualifications, collective/individual training, and personalized support programmesRequirementsElectrically qualified - City & Guilds Level 2 & 3 (Required)18th Edition (Required)Must be able to provide copies of your trade certificatesA proven track record in commercial building maintenanceMulti-skilledGood communication skillsClient FacingIf you are interested in this opportunity please send your CV to Archie Reed of CBW Staffing Solutions for more information.....Read more...
Internal Sales Engineer Are you a customer centric, personable, proactive self-starter with exceptional communication skills?If so, we have an exciting opportunity providing first class support to our customers and external sales team.Salary: up to £40,000 (depending on experience)Location: office based (SO16 0BT)Hours of work: 35 hours (Mon – Fri)Holiday: 25 days (plus bank holidays)About UsThe company exists to design and supply the most energy efficient products and systems it can, to the ventilating, air conditioning and process industries. We inspire our team to provide solutions that address the climate crisis.We are looking for a confident Internal Sales Engineer to join our team to play an integral role in growing this newly formed division. The Internal Sales Engineer will be dealing with customer enquiries and producing quotations with supporting documents, finding the best solution and providing a first-class service.Working with selected manufacturing partners you will demonstrate a level of Valve and or Instrumentation knowledge to assist our customers from the outset. Additional and continuous training will be providedDuties & Responsibilities
Respond to customer enquiries providing a competitive quotation that meets their requirements.Process sales orders and maintain accurate records.Liaise with operations and logistics to ensure all orders are delivered on schedule.Collaborate with the internal and external sales team to meet and exceed sales targets.Route qualified opportunities to the appropriate external salesperson.Manage and resolve customer queries in a timely and efficient manner.Provide customers with a good understanding of our products and services.Build and maintain supplier relationships.
Experience & Skills
Excellent written and verbal communication skillsAble to maintain professionalism under pressureHigh-level of attention to detailAbility to multi-task and prioritise effectivelyAble to effectively problem solve and resolve customer complaintsCommitment to providing first class customer serviceGood team playerIT literatePrevious customer service or sales experienceQuotation and order processing experience
This is a fantastic opportunity for an enthusiastic individual wanting to progress their career whilst working for a forward thinking, dynamic and growing company.Apply today to be considered for the role. INDHS Equals One is an advertising and recruitment agency working on behalf of our client to promote this vacancy. You may be contacted directly by the employer should they wish to progress your application. Due to the number of applications we receive, we are unable to provide specific feedback if your application is unsuccessful.....Read more...
An exciting opportunity has arisen to join a market-leading group operating across the Commercial, Industrial, Residential and Service sectors, who are now looking for an Electrical Design Engineer to support the delivery of innovative engineering solutions across their expanding product portfolio.
This Gloucestershire based, dynamic organisation has become the market leader in each of the sectors it serves and is embarking on an ambitious growth plan over the next 3 years. With continued investment in products, infrastructure and most importantly, its people, this is a fantastic opportunity to join a forward-thinking engineering function that prides itself on being entrepreneurial, customer-focused, competitive and operationally best-in-class.
As an Electrical Design Engineer here, you will take responsibility for electrical design activities across the product lifecycle, from early-stage concepts all the way through to production release. This will include control panel design, PLC integration and ensuring that all electrical systems meet stringent safety, quality and compliance requirements. This is a crucial role in delivering robust and manufacturable engineering solutions working as part of a multi-disciplinary team.
Key responsibilities for the role of Electrical Design Engineer based in Gloucestershire:
Leading the electrical design of packaged pumping systems, including control panel layouts, schematic diagrams and cable schedules.
Researching and developing new product concepts while enhancing existing designs in response to customer, production and market feedback.
Specifying and selecting electrical components to meet performance, safety and compliance requirements.
Development and integration of PLC-based control systems including configuration, I/O definition and functional documentation (PLC programming experience would be useful but is not essential).
Producing and maintaining detailed electrical documentation including wiring diagrams, design calculations and BOMs.
Ensuring that all electrical designs comply with CE/UKCA requirements, Health & Safety regulations and relevant UK/EU directives (LVD, EMC, Machinery Directive).
Supporting EMC compliance through best-practice design and collaboration with external test facilities.
Collaborating with Mechanical Design, Compliance and Manufacturing teams to ensure design integrity and manufacturability.
Providing input into design reviews, risk assessments and verification/validation testing throughout the development lifecycle.
Key skills required for Gloucestershire based role of Electrical Design Engineer:
Degree or equivalent in Electrical or Electronic Engineering.
Proven experience in product design or development, (specific experience involving water management / fluid-handling equipment would be ideal but is not a pre-requisite).
Experience of working within R&D or New Product Development environments.
Proven experience of designing industrial/commercial control panels (a working knowledge of PLC-based control systems and Variable Speed Drives would be an advantage but is not a pre-requisite)
Solid experience in using CAD/schematic design software, experience of SolidWorks Electrical would be ideal but experience of EPLAN, or AutoCAD Electrical will also be considered.
Familiarity with key standards and directives, including:
– Low Voltage Directive (LVD)
– EMC Directive
– Machinery Directive
– BS EN 60204-1 (Electrical Equipment of Machines)
– EN 60335
Working environment and opportunities:
Hybrid working arrangements with time split between the Gloucestershire based office, home and site
Opportunity to join a highly skilled, ambitious engineering team within a rapidly expanding market leader
Involvement in the full product lifecycle, contributing to innovative and technically challenging projects.
A culture that encourages development, continuous improvement and professional growth.
This is a great opportunity to join a forward-thinking engineering group with ambitious growth plans, a collaborative culture and a commitment to building the best place to work while helping shape the future of high-performance, compliant engineering solutions.
To apply please send your CV to clam@redlinegroup.Com, or for more information contact Chuck Lam on 01582 878868.....Read more...
Manufacturing/Water Treatment Engineer (Days Only)
Location: Rugby Salary: £46,500 +5% Bonus
Benefits include:
Monthly product allowance
Private medical options
Enhanced pension & life assurance
24/7 GP access
High street discounts
Shift Pattern: 4 on / 4 off Days only
Company Overview
My client is a leading FMCG supplier in the UK. With a strong national footprint, our business includes multiple production facilities and logistics depots servicing customers across the UK. Our goal is simple: ensuring our people succeed while delivering exceptional products and service.
Job Overview
As a Manufacturing/Water Treatment Shift Engineer, you will play a key role in delivering engineering excellence through fault resolution, planned maintenance, and continuous improvement. You will be responsible for minimising equipment downtime, improving reliability, and ensuring the safe and efficient operation of manufacturing equipment, building infrastructure, and utilities. Working within a fast-paced FMCG environment, you will support site performance through preventative, predictive, and corrective maintenance practices, while adhering to strict Health, Safety, Quality, and Environmental standards.
Key Responsibilities
Perform planned and preventative maintenance tasks within CMMS (SAP PM), including modular maintenance across the site (e.g., pumps, valves, filling lines, water treatment).
Respond promptly to breakdowns and failures to minimise production disruption.
Lead or support shutdown activities during Asset Care Windows and annual planned outages.
Ensure compliance with Health, Safety, Environmental, and Quality standards, including LOTO and Permit to Work systems.
Accurately record maintenance activities in SAP PM and support reliability KPIs.
Apply Lean principles (TPM, RCM, RCA, 5S, 5-Why) to drive continuous improvement.
Collaborate with operational teams to improve processes and share technical knowledge.
Provide engineering support for statutory inspections, audits, and water treatment operations.
Experience & Attributes
Proven hands-on engineering experience within a manufacturing environment (FMCG preferred).
Multi-skilled in mechanical and electrical disciplines; PLCs (Siemens S7), HMIs, and SCADA experience desirable.
Strong understanding of Health, Safety & Environmental legislation, including Food Safety.
Excellent troubleshooting and problem-solving skills with a track record of improving reliability.
Strong interpersonal and communication skills; ability to work collaboratively.
IT literate (MS Office) with experience using SAP PM or similar systems.
Driven, adaptable, and committed to continuous improvement.
Education & Qualifications
Minimum NVQ Level 3 qualification; HNC in Engineering preferred.
Ideally multi-disciplined (mechanical, electrical, controls, automation).
IET 18th Edition Wiring Regulations desirable.
Knowledge of Quality, Health, Safety & Environmental aspects (including Food Safety).
Familiarity with Lean Principles and Operational Excellence.
....Read more...
Snr AV Systems Designer – This is new position that is looking for a tried and tested Corporate / Commercial AV Systems Design Engineer. You will need to have a min of 6years in the use of AutoCAD to design AV systems, AV schematics, AV rack layout and elevations / room layout. Projects will range from £250k into the millions, so previous experience on large scale projects is a must. The systems will be installed either the Corporate, Hospitality or leisure marketplace. Due to the technical nature of this role, you must have a technical AV background that brings skills and knowledge of Crestron control, Lutron lighting, AV related networks and switching, along with audio solutions and large scale videowall deployments. If you have the relevant skills and experience, please send your full CV ASAP.
AV A/V A-V AUDIOVISUAL AUDIO/VISUAL AUDIO-VISUAL AUTOCAD CAD DESIGN SYSTEMS SOLITUINS RACK CRESTRON EXTRON NETWORK LIGHTING SOUND AUTOMATION CONTROL LONDON SURREY SUSSEX KENT HANTS HAMPSHIRE BERKSHIRE BUCKS BUCKINGHAMSHIRE
YOU MUST BE LIVING IN THE UK AND ALLOWED TO WORK HERE LEGALLY AND SHOW A CLEARLY DEFINED SKILL SET WITHIN THE CV....Read more...
We are seeking a FPGA firmware engineer, specialising in the design and development of advanced electronics hardware, including power systems, analogue, digital, and RF components. In this role, you will oversee the complete firmware development cycle, from negotiating requirements and drafting design architecture to validating and verifying the final product.
Main Duties
Design and implement high-quality FPGA firmware, incorporating signal processing and high-speed data interfaces.
Create and execute testbenches to verify FPGA firmware functionality.
Develop firmware for complex FPGAs, SoCs, and PLDs, ensuring optimal performance.
Conduct firmware testing on actual hardware systems.
Technical Expertise
A degree in Electrical Engineering, Communications Engineering
Strong foundation in electronic engineering, including binary number systems and digital logic design (RTL level).
Proficiency in HDL languages (VHDL or Verilog) and a minimum of two years of experience as a firmware developer.
Comprehensive understanding of FPGA architecture and signal processing for RF signals, ADCs, and DACs.
Familiarity with digital electronic and DSP design principles.
Experience with Xilinx FPGAs
Competence in using lab equipment such as oscilloscopes, spectrum analysers, RF signal generators, and network analysers.
Knowledge of Linux, Git, TCL, and C programming.....Read more...
We are seeking a FPGA firmware engineer, specialising in the design and development of advanced electronics hardware, including power systems, analogue, digital, and RF components. In this role, you will oversee the complete firmware development cycle, from negotiating requirements and drafting design architecture to validating and verifying the final product.
Main Duties
Design and implement high-quality FPGA firmware, incorporating signal processing and high-speed data interfaces.
Create and execute testbenches to verify FPGA firmware functionality.
Develop firmware for complex FPGAs, SoCs, and PLDs, ensuring optimal performance.
Conduct firmware testing on actual hardware systems.
Technical Expertise
A degree in Electrical Engineering, Communications Engineering
Strong foundation in electronic engineering, including binary number systems and digital logic design (RTL level).
Proficiency in HDL languages (VHDL or Verilog) and a minimum of two years of experience as a firmware developer.
Comprehensive understanding of FPGA architecture and signal processing for RF signals, ADCs, and DACs.
Familiarity with digital electronic and DSP design principles.
Experience with Xilinx FPGAs
Competence in using lab equipment such as oscilloscopes, spectrum analysers, RF signal generators, and network analysers.
Knowledge of Linux, Git, TCL, and C programming.....Read more...
Senior Infrastructure Engineer
Central London
Up to £80k
Well-established, highly profitable construction engineering business is seeking an experienced Senior Infrastructure Engineer to join them on a permanent basis. You'll be joining at a critical time as the organisation expands its technical capability, with ambitious growth plans and multiple acquisitions planned every year for the next 5 years (8 in the past 12 months).
Reporting into the IT Operations Manager, you will oversee core infrastructure and networking. You'll work closely with managed service providers to ensure seamless operations and business continuity whilst taking a lead on regular site set-ups.
Key Responsibilities:
• Lead and manage office and site networks, aligning with business strategy
• Act as an escalation point for the Service Desk Team
• Set up and configure Local Area Networks (LANs), including hardware deployment and support
• Coordinate with third-party MSPs for network and infrastructure management
• Manage firewall operations and connectivity with ISPs
• Oversee network IP addressing and VPN setups
• Support business continuity through proactive incident management
• Rapid deployment of site connectivity solutions, including 4G routers
• Monitor network health and performance, ensuring high availability and resilience
• Maintain inventory and configuration records for infrastructure and software
• Collaborate with the Security Operations Center (SOC) on network security
• Support software licensing and upgrades
• Support data privacy and security audits
• Provide technical support and mentoring
• Maintain server rooms and ensure operational efficiency
• Develop and implement business processes and documentation
Requirements:
• Strong knowledge of Azure infrastructure management
• Strong in network protocols (TCP/IP, DHCP, DNS, etc.), ideally candidates must hold a CCNA/CCNP etc.
• Experience with FortiGate Firewalls and Windows Operating Systems
• Familiarity with WAN, LAN, VPN, and wireless networks
4 days per week onsite initially, dropping to 3 days after 3 months.
....Read more...
Electrical Maintenance Engineer - FM Service Provider - Healthcare Environment - Sutton - Up to £45,794An exciting opportunity to join an established building services company based in Sutton has arisen! CBW Staffing Solutions is currently recruiting for an Electrical Engineer to be based in a healthcare contract located in Sutton. He or she will be required to carry out planned and reactive building maintenance alongside the maintenance team on-site. This would be a great opportunity for a candidate looking to expand their knowledge and progress their career within a highly reputable FM Company. In return, the company is offering a competitive salary of up to £45,794, overtime, further training, and a route into further career progression. Hours of work:4 on 4 off days only 07:00 AM - 19:00 PM Plenty of Overtime availableKey Duties & ResponsibilitiesLighting (Small installation, Fault-finding, Lamping, etc)Emergency lighting testsControl PanelsChanging BallastBMS System - Monitor (i.e. Hot & cold)Maintain and update Log booksPlumbing - Unblocking toiletsPumps, motorsPackageSalary of £43,000Pension Scheme24 days annual leave (+ public holidays)Life Cover equivalent to 1 times annual salary24/7 Employee Assistance Program and access to mental wellbeing appEmployee discount shopping schemes on major brands and retailersGym membership discounts Cycle to work scheme Broad range of learning opportunities, such as professional qualifications, collective/individual training, and personalized support programmesRequirementsElectrically qualified - City & Guilds Level 2 (Required)18th Edition (Required)Electrical Testing - 2391 (Desirable)Must be able to provide copies of your trade certificatesA proven track record in commercial building maintenanceMulti-skilledGood communication skillsClient FacingIf you are interested in this opportunity, please send your CV to Charlie Long of CBW Staffing Solutions for more information.....Read more...
Junior Electrical Maintenance Engineer – FM Service Provider – Government Buildings – Temple – £43,000An exciting opportunity has arisen to join an established building services company based in Temple! CBW Staffing Solutions is currently recruiting for a Junior Electrical Maintenance Engineer to work on a government contract located in Temple. The successful candidate will support the on-site maintenance team, carrying out planned and reactive building maintenance while developing their skills and technical knowledge within a commercial environment.This is an excellent role for someone looking to grow their career within a highly reputable FM company. In return, the company is offering a competitive salary of £43,000, overtime, further training, and a clear route for long-term progression.Hours of WorkMonday to Friday8am - 5pmPlenty of overtime availableKey Duties & Responsibilities(Training and support provided where required)Basic lighting tasks (small installations, lamping, simple fault-finding)Assisting with emergency lighting testsSupporting senior engineers with control panel workChanging ballastsMonitoring BMS systems (hot & cold checks)Maintaining and updating site logbooksBasic plumbing tasks (e.g., unblocking toilets)Assisting with pumps and motorsPackage£43,000 annual salaryPension scheme24 days annual leave (+ public holidays)Life cover equivalent to 1× annual salary24/7 Employee Assistance Programme + mental well-being appEmployee discount schemes across major retailersGym membership discountsCycle-to-work schemeWide range of learning and development opportunities, including professional qualifications and structured training programmesRequirementsElectrical qualifications — City & Guilds Level 2 & 3 (Desirable)18th Edition (Desirable)Must be able to provide copies of any qualifications achievedWillingness to learn and developGood communication and customer-facing skillsIdeally some exposure to building maintenance (commercial or residential), but not essentialIf you are interested in this opportunity, please send your CV to Bailey of CBW Staffing Solutions for more information.....Read more...
