PLC Software Engineer required to join a growing team delivering exceptional water and wastewater client services and innovative solutions.
Key skills
PLC Programming commercial experience ideally within water or wastewater industry.
Electrical control panel knowledge.
Electrical or Electronic Engineering qualifications and experience in system software engineering.
Automation and Process Control Equipment understanding.
Driving licence.
Role
PLC Software Engineering.
Design, develop, program and testing PLC systems.
Specify, design and build programs.....Read more...
Our client, who are a well-established UK electronics manufacturer with a rapidly growing innovation and product development division, are looking for an Electronics Engineer – Newbury to join their team on a permanent basis.
This role is based on-site in Newbury, within a fast-paced and highly capable engineering environment that combines design, PCB fabrication, and assembly under one roof. You will work across a wide variety of industries including aerospace, automotive, industrial, and IoT, leading full lifecycle product development projects from concept through to production.
Key responsibilities of the Electronics Engineer job based in Newbury:
Lead end-to-end electronics product development projects, from initial concept and specification through to prototyping and production.
Design innovative electronic systems and supporting embedded firmware.
Create schematics and PCB layouts using Altium Designer.
Develop and execute test strategies for both hardware and embedded software.
Act as the technical lead/architect on projects, collaborating with cross-functional teams where required.
Support prototype build, board bring-up, and validation activities.
Participate in design reviews and contribute to continuous improvement within an agile development environment.
Maintain accurate project documentation and manage tasks within tools such as Jira.
Ensure designs meet industry standards, manufacturability requirements, and cost targets.
Experience required for the Electronics Engineer job based in Newbury:
Degree, HNC, or HND in Electronic Engineering (or equivalent industry experience).
Strong proficiency in PCB design, schematic capture, and BOM creation using Altium Designer.
Experience with embedded systems and communication protocols such as SPI, I2C, UART, Ethernet, CAN, or LIN.
Proven ability to troubleshoot and resolve hardware and embedded software issues.
Experience working across the full product lifecycle within an agile development environment.
Familiarity with version control tools (e.G. Bitbucket) and task management systems (e.G. Jira).
Knowledge of EMC testing, compliance standards, and design for manufacture is highly desirable.
Strong communication skills and ability to lead technical discussions with customers and internal teams.
If this Electronics Engineer job in Newbury could be of interest, please send your CV to bwiles@redlinegroup.Com or call Ben on 01582 878816.....Read more...
Mobile Air Conditioning Engineer - Chesterfield - National Facilities Management Organisation: FMCG CBW Staffing Solutions are seeking a skilled Air Conditioning Engineer to join our client’s team of facilities management professionals. The ideal candidate will have a strong background in HVAC maintenance and repair, responsible for maintaining and servicing air conditioning systems to ensure optimal performance and end-client satisfaction. This opportunity is split between mobile and static duties, with 2 days working mobile across sites and 3 days based at a static site in Chesterfield. Package:Competitive salary of up to £44,000 per annum (depending on experience)Core hours are Monday to Friday (40 hours per week)Participation in 'out of hours' on call rota25 days annual leave plus bank holidaysGenerous workplace pension schemeTraining, development & progression opportunitiesResponsibilities:Maintain, service and troubleshoot a variety of air conditioning systems, including split systems, VRV/VRF systems, and chillersPerform routine maintenance tasks, such as cleaning coils, replacing filters, moving parts, to prolong the lifespan of HVAC equipmentDiagnose and repair mechanical and electrical faults in air conditioning units, ensuring minimal downtime and maximum efficiencyConduct inspections and assessments of HVAC systems to identify potential issues and recommend appropriate solutionsCollaborate with other maintenance personnel and contractors to coordinate complex repairs and system upgradesAdhere to safety protocols and industry regulations to promote a safe working environmentQualifications:Proven experience as an Air Conditioning Engineer or similar role within the facilities management industryHold your F-Gas Cat 1 Regulations certificationStrong knowledge of HVAC systems, including installation, maintenance, and repair techniquesFamiliarity with refrigeration principles and equipmentProficiency in diagnosing and troubleshooting mechanical and electrical faultsExcellent problem-solving skills and attention to detailAbility to work independently and as part of a teamEffective communication and customer service skillsIf you are a dedicated Air Conditioning Engineer, looking for a rewarding career opportunity, please apply with your full CV or contact Amy O’Shea at CBW Staffing Solutions.....Read more...
Site based Air Conditioning Engineer - Leicester - National Facilities Management Organisation: FMCG CBW Staffing Solutions are seeking a skilled Air Conditioning Engineer to join our client’s team of facilities management professionals. The ideal candidate will have a strong background in HVAC maintenance and repair, responsible for maintaining and servicing air conditioning systems to ensure optimal performance and end-client satisfaction. This is a site based opportunity, located near Leicester, Leicestershire. Package:Competitive salary of up to £42,000 per annum (depending on experience)Core hours are Monday to Friday (40 hours per week)Participation in 'out of hours' on call rota25 days annual leave plus bank holidaysGenerous workplace pension schemeTraining, development & progression opportunitiesResponsibilities:Maintain, service and troubleshoot a variety of air conditioning systems, including split systems, VRV/VRF systems, and chillersPerform routine maintenance tasks, such as cleaning coils, replacing filters, moving parts, to prolong the lifespan of HVAC equipmentDiagnose and repair mechanical and electrical faults in air conditioning units, ensuring minimal downtime and maximum efficiencyConduct inspections and assessments of HVAC systems to identify potential issues and recommend appropriate solutionsCollaborate with other maintenance personnel and contractors to coordinate complex repairs and system upgradesAdhere to safety protocols and industry regulations to promote a safe working environmentQualifications:Proven experience as an Air Conditioning Engineer or similar role within the facilities management industryHold your F-Gas Cat 1 Regulations certificationStrong knowledge of HVAC systems, including installation, maintenance, and repair techniquesFamiliarity with refrigeration principles and equipmentProficiency in diagnosing and troubleshooting mechanical and electrical faultsExcellent problem-solving skills and attention to detailAbility to work independently and as part of a teamEffective communication and customer service skillsIf you are a dedicated Air Conditioning Engineer, looking for a rewarding career opportunity, please apply with your full CV or contact Amy O’Shea at CBW Staffing Solutions.....Read more...
Lead AV Installation Engineer / Lutron Programmer - I have a new position for a leading light in London that specialise in the world of high end residential AV Installation. They are now looking for a true master in the fine art of custom av installation. You will need to have a min of 4 years experience in this specific AV market. The role will see you working on projects in London and the surrounding home counties. The clients offer a good career and relevant AV training to further develop your skills and knowledge. As a lead engineer you will be expected to be a figure on site that can take control of other engineers and trades to make sure the project is delivered on time and on budget. You will have previous experience of the installation / configuration / commissioning of Crestron or Control4 or Savant AV control systems. If you have the skills and experiences that fulfil the above then please send me your full CV asap.
AV A/V A-V AUDIOVISUAL AUDIO-VISUAL AUDIO/VISUAL VIDEO CRESTRON DM NVX LUTRON CONTROL4 CEDIA SAVANT AUTOMATION RESIDENTIAL BESPOKE MDUs PROGRAMMING CONFIGURATION HOME NETWORK LONDON SURREY KENT SUSSEX....Read more...
Network & Communications Installation Engineer - I have an exciting opportunity for an experienced network & telecom engineer to work alongside the Project Manager and Engineering teams on high end residential projects. You will work with the latest technologies, influence design and deliver systems to the highest quality. You will be responsible for consulting on design, configuring network hardware, commissioning, and delivery of a projects Network and telecommunications systems.
It is essential that you are an excellent communicator with good Client facing skills and have strong Network Engineering experience and excellent knowledge of wireless networks, fibre optics and
telecoms solutions. This is a field-based and onsite based role.
Key technical skills:
CCNA Certified.
Excellent working knowledge and experience of:
Networks and Network architecture
Wireless network deployment and management, LAN Controller setup and commissioning for wireless networks
Session Initiated Protocol (SIP) and IP Telephone systems
WAN Traffic Management and Path Selector configuration, such as, Kerio, Peplink, Sophos and Cisco
Wi-Fi coverage analysis & mapping/heatmaps
Firewall configuration and implementation
Fault finding and commissioning skills are compulsory
Use of hand tools, network & telecom test equipment
Microsoft products such as Word, Excel and MS 365 suite
Key attributes:
Good Time Management Skills with the ability to work on your own initiative in a well organised and efficient manner
Managing relationships and interfaces with other contractors
Team player with ability to identify engineer weaknesses and offer guidance and assistance
Experience of supervising in the superyacht market or a relevant complimentary industry
Monitoring and reporting project progress to the Project Manager
Accuracy & management of project documentation
An eye for detail and a good understanding of quality control
Excellent communication skills on a technical and personal level
Proven track record for completing projects on time and on budget
Punctual, smart and can represent the company in meetings to client representatives
This is predominantly an office based role in LONDON with site visits to clients homes. If you have the desire or previous experience to work on some of the largest most technically advanced residential integration projects in the world then please send your full matching CV.
DUE TO THE NATURE OF THE ROLE THERE IS NO SPONSORSHIP ON OFFER
NETWORK DATA INSTALLATION CONFIGURATION COMMS COMMUNICATIONS CISCO CCNA CCNP LONDON WAN WIFI WI-FI RUCKUS DRAYTEK HOME AUTOMATION CI CUSTOM INSTALLATION....Read more...
Senior Developer - Upper Austria (Innviertel region) / Hybrid
(Senior .NET Developer, .NET Software Engineer, Softwareentwickler, Entwickler, C#, WPF, Entity Framework, MS SQL Server, MVVM, dependency injection, SOLID principles, MS Visual Studio, Programmer, Softwareentwickler, Entwickler, .NET Software Engineer, .NET Developer)
My client are one of the fastest growing Software Companies in Austria. Established in the Software Solutions market for over 40 years, they are seeking ambitious Senior .NET Software Engineers to develop a new core software product that will revolutionise the industry.
Working in an Agile Scrum team, the successful candidate will contribute to code, design reviews and complex technical challenges. Strong, hands-on C# expertise is required, as well as experience with WPF, Entity Framework, MS SQL Server and Visual Studio. Knowledge of MVVM, dependency injection, and SOLID principles would be expected, but full training can be provided. Any experience of participation in the development and implementation of strategic architectural decisions would also be very useful.
This is an excellent opportunity for a Senior .NET Software Engineer to working within a challenging supportive environment. Top performers can expect to receive their first promotion (and pay rise) within 6 months.
To apply for these positions please send your CV to Nathan Warner at Noir.
Salary: €5k-€6k per month (14 months, so €70k - €84k per annum) + Bonus + Pension + Benefits
Location: Upper Austria (Innviertel region) - Hybrid - once a week in the office
Languages: C1 German & fluent English required
Applicants must have the right to work in Austria.
Noir continues to be the leading Microsoft recruitment agency; we can help you make the right career decisions!
NOIRAUSTRIAREC
NOIREUROPEREC
NOIREURNET....Read more...
A Product Cybersecurity & Firmware Engineer is sought to join an innovative engineering team in Newark, Nottinghamshire, contributing to the development of secure, network-connected embedded products for industry-leading assistive listening solutions.
The Product Cybersecurity & Firmware Engineer, Newark, Nottinghamshire, will be expected to develop and apply your expertise in embedded software development, cybersecurity, and secure networking technologies. Working closely with firmware, software, hardware, compliance, and product management teams, you will play a key role in ensuring products are secure, compliant, and ready for deployment in global markets.
Responsibilities include:
Develop secure embedded software for network-connected products.
Implement cybersecurity features and secure communication protocols.
Identify and resolve security vulnerabilities within embedded systems.
Collaborate with firmware, hardware, software, and compliance teams throughout product development.
Support product cybersecurity assessments and regulatory compliance activities.
Contribute to design reviews, technical problem-solving, and continuous product improvement.
Produce and maintain technical documentation to support development and certification activities.
Key skills & experience:
Degree in Computer Science, Software Engineering, Electronics, or equivalent experience.
Strong embedded software development experience using C/C++.
Experience with network-connected devices and communication protocols such as TCP/IP and HTTPS/TLS.
Knowledge of RTOS environments such as FreeRTOS, ThreadX, or similar.
Understanding of embedded systems, low-level software development, and debugging techniques.
Familiarity with cybersecurity principles and secure product development.
Strong problem-solving skills and the ability to work within multidisciplinary engineering teams.
How to apply:
Apply now for the Product Cybersecurity & Firmware Engineer role in Newark, Nottinghamshire. Send your CV to adighton@redlinegroup.Com or call Adam on 01582878821
....Read more...
With demand continuing to grow and experienced engineers retiring from the industry, this market-leading organisation is investing heavily in its people. As a Training & Application Engineer, you'll work within a dedicated training academy, receive extensive product and application training, and enjoy clear progression into more advanced technical and commercial roles. If you're looking for a varied position that combines engineering, mentoring and customer interaction, this is an exceptional long-term opportunity.
As a Training & Application Engineer, your role will involve:
Delivering technical training on specialist electrical testing equipment
Preparing training classrooms and practical demonstrations
Training engineers on secondary protection, relays, substations
Supporting customers with product applications and technical queries
Working closely with experienced Application Engineers before independently delivering training
The Ideal Training & Application Engineer Will Have:
An electrical engineering background
Experience within power systems, testing, protection, relays, substations or commissioning
A passion for developing others and sharing technical knowledge
Previous training experience is beneficial but not essential
A degree in Electrical or Electronic Engineering is preferred
Please apply and call Becka 07458163046 for immediate consideration.
Key Words: This vacancy is being advertised by Future Engineering Recruitment Ltd. The services of Future Engineering Recruitment Ltd are those of an Employment Agency. Please visit our website to view other positions we are currently handling. Future Engineering Recruitment Ltd can only accept applications from candidates who have a valid legal permit or right to work in the United Kingdom. Potential candidates who do not have this right or permit, or are awaiting an application to obtain this right or permit, should not apply as your details will not be processed.....Read more...
This Mechanical Maintenance Engineer role is working with one of the UK's leading manufacturing organisations and offers a fantastic salary of £55,000 plus a performance bonus, excellent industry benefits including pension match to 10% and fantastic overtime opportunities. Based near the area of Whittlesey, the role is 4 on 4 off days and nights, however, currently the nights are from 10am to 10pm to support with the current production needs of the site. The days shift is 6am - 6pm.The successful Mechanical Maintenance Engineer will benefit from:
A base salary of up to £55K per annum
Fantastic performance bonus (averaging £22 every shift)
4 on 4 off (current hours are 6am-6pm / 10am-10pm nights)
Company pension matched up to 10%
28 days holiday
Overtime also available at a minimum of x1.5, x2 taking on target earnings to well over £60K
Working as part of a small team of Engineers providing support and development
Key Responsibilities of Mechanical Maintenance Engineer
To carry out essential planned mechanical maintenance and complete necessary repairs to keep the factory in good working order
Carry out Planned Preventative Maintenance, Inspections, Service and Repairs on heavy press machinery, bearings, shafts, conveyor-based systems etc
Involvement in on-going process improvement throughout the factory, developing new ideas and better solutions
Qualifications & Experience:
Applicants must have demonstrable knowledge & expertise in PPM and reactive maintenance on industrial plant equipment
Experience with performing maintenance tasks on industrial production machinery
High degree of Health & Safety awareness
In return, you will be offered a truly exciting, hands-on role within a dynamic and fast-paced manufacturing business, providing opportunities to develop your skill sets and progress your career....Read more...
This Mechanical Maintenance Engineer role offers a fantastic salary of £50,947 and the opportunity to work with one of the UK’s largest manufacturing organisations at its facility in Throckley. Benefits include a 5% KPI bonus, a 10% pension match, overtime at a premium, and electrical training to become multi-skilled.
The successful Mechanical Maintenance Engineer will benefit from:
A base salary up to £50.9k per annum, plus bonus, and overtime also available at a minimum of x 1.5, x 2
Company pension matched up to 10%
Share option scheme, plus employee benefits program
Continental shift pattern - Days and Nights
Training programs, electrical training and qualifications to become multi-skilled and career development opportunities etc.
Key Responsibilities of Mechanical Maintenance Engineer:
To carry out essential planned mechanical maintenance and complete necessary repairs to keep factories in good working order
Involvement in on-going process improvement throughout the factories, developing new ideas and better solutions
Carry out Planned Preventative Maintenance, Inspections, Service and Repairs, hydraulic machinery, bearings, shafts, conveyor-based systems etc.
Qualifications & Experience:
Applicants must hold a recognised Mechanical Engineering qualification such as an Advanced Apprenticeship & or; Level 3 NVQ with BTEC Level 3 or above, City & Guilds in Mechanical Engineering/Craft studies
Demonstrable knowledge & expertise in PPM and reactive maintenance on Industrial Plant & Equipment
High degree of Health & Safety awareness.
In return, you will be offered a truly varied role within a dynamic and a fast-paced business, providing opportunities to develop your skill set and progress your career. If interested, please apply now!....Read more...
An established and growing equipment hire business is looking to recruit an experienced Workshop Engineer to join its busy depot team. This is an excellent opportunity for someone with a strong mechanical background who enjoys fault finding, servicing and repairing a wide range of small tools and equipment.
Working within a modern workshop, you will play a key role in ensuring equipment is maintained to the highest standards, ready for hire and customer use.
Key Responsibilities
- Service, repair and maintain a wide range of small tool hire equipment.
- Diagnose and rectify mechanical faults efficiently.
- Carry out inspections and preventative maintenance.
- Ensure all equipment is prepared to a high standard before hire.
- Attend occasional customer breakdowns and carry out on-site repairs when required.
- Maintain accurate service records and job documentation.
- Continue to develop product knowledge across the equipment range.
- Work safely at all times, following company health and safety procedures.
- Liaise professionally with colleagues and customers.
About You To be successful in this role you should have:
- Previous experience repairing, servicing and maintaining small tools or similar equipment.
- Strong diagnostic and fault-finding skills.
- Experience working on both 2-stroke and 4-stroke petrol engines.
- Experience working with diesel engines.
- Ability to work independently and manage your own workload.
- A proactive, reliable and flexible approach.
- Good communication, literacy and numeracy skills.
- Basic computer skills.
- Excellent customer service skills.
- A full UK manual driving licence.
What's on Offer
- Competitive salary depending on experience.
- Monday to Friday working hours.
- 25 days annual leave plus bank holidays.
- Additional annual leave after long service.
- Weekly pay.
- Company pension scheme.
- Group life assurance.
- Employee wellbeing programme.
- Employee referral scheme.
- Full company uniform provided.
- Employee discounts, including legal services.
- Opportunities for ongoing training and career development.
If you're an experienced Workshop Engineer or Small Tool Engineer looking to join a well-established company that values its employees and offers long-term career opportunities, we'd love to hear from you.
peter@holtautomotive.co.uk....Read more...
Electrical / Mechanical Maintenance Engineer x 2 - Sunbury-on-Thames, Surrey - Up to £45,000 I have a fantastic opportunities to work for a leading maintenance company in Sunbury-on-Thames, Surrey working at a large commercial building behalf of a large property management company. You will carry out PPM's and reactive maintenance, statutory compliance and general building maintenance tasks with large commercial premisesMy client is looking for a 2 x Electrical / Mechanical Maintenance Engineer with experience in critical building services to work on a High profile Building at Sunbury-on-Thames, Surrey carrying out maintenance. Hours4 days on, 4 days off - 08:00am - 18:30pmRequirementsApprentice TrainedMechanical / Electrical - City & Guilds Level 2 & 3 or EquivalentClient FacingCommercial Building Maintenance ExperienceAbility to work under pressure whilst remaining calm, clear thinking and able to deliver the required services to the client within given time constraints.Navy Engineers ConsideredPackageBasic Salary of up to £45,00020 Days Annual leave PensionHealthcarePlenty of OTInternal and External Training courses Career progression - would want the engineer to develop into supervisors and above.Packing on site Duties Electrical and Mechanical PPM's and Reactive maintenanceGeneral building services tasksEmergency lighting, Fire alarms, FCU's, AHU's, HVAC plant, Water treatmentKnowledge of UPS, BMS, Chillers, Cooling plant, HV and LV systemsWorking as part of a small maintenance team to deliver a great service to the clientEscorting Sub-contractors, Issuing permits / RAMSMy client is able to interview straight away if the right candidates are available so to avoid missing out please send your CV today to Dan Barber at CBW Staffing Solutions....Read more...
Our client, a world leader in advanced RF and microwave technology, are looking for a PCB Layout Engineer based in Cambridge to join their team on a permanent basis.
This is an exciting opportunity to work on complex, high-performance electronic systems, supporting the development of cutting-edge products across telecoms, space, and defence sectors. The role goes beyond traditional PCB layout, combining design expertise with a strong understanding of engineering principles and manufacturability.
Key responsibilities of the PCB Layout Engineer job based in Cambridge:
Own PCB layout activities across complex electronic products and subsystems.
Translate schematic designs into high-quality PCB layouts meeting electrical, mechanical, thermal, and manufacturing requirements.
Design with consideration for impedance control, grounding, power distribution, thermal management, and EMC performance.
Support high-speed digital interfaces such as Ethernet, DDR, LVDS, PCIe, and JESD204.
Generate full fabrication, assembly, and manufacturing documentation packages.
Participate in design reviews, DFM/DFA assessments, and engineering risk reviews.
Verify component footprints, symbols, and libraries against datasheets.
Support continuous improvement of PCB standards, libraries, and design processes.
Work with suppliers and manufacturing partners to resolve production challenges.
Support prototype builds, board bring-up, and investigation of PCB-related issues.
Experience required for the PCB Layout Engineer job based in Cambridge:
Strong PCB layout experience using Altium Designer and Altium 365.
Experience taking PCB designs from schematic through to manufacturing release.
Good understanding of PCB stack-ups, signal integrity, power integrity, thermal design, and EMC.
Experience working with mixed-signal, digital, power, and RF-related designs.
Ability to interpret schematics and understand engineering intent.
Experience creating and validating component footprints and libraries.
Knowledge of PCB fabrication, SMT assembly, and DFM/DFA processes.
Strong attention to detail and ability to work within multidisciplinary teams.
This is an excellent opportunity to join a highly collaborative and innovative engineering team, working on cutting-edge RF technologies and contributing to products used in critical communications and advanced applications.
If this PCB Layout Engineer job based in Cambridge could be of interest, please send your CV to bwiles@redlinegroup.Com or call Ben on 01582 878816.....Read more...
Electrical Maintenance Engineer Location: Elephant & Castle, South East LondonSalary: Up to £45,000Job Type: Full-Time, PermanentHours: Monday to Friday, 08:00 AM – 17:00 PM About the Role An exciting opportunity has arisen for an experienced Electrical Maintenance Engineer to join a leading FM service provider on a static commercial site in Elephant & Castle. This role is ideal for a qualified electrical engineer with a strong background in commercial building maintenance who is looking for a fresh challenge within a stable environment, offering excellent training, overtime opportunities, and long-term career progression. The successful candidate will be responsible for carrying out planned preventative maintenance (PPM) and reactive electrical maintenance, while also supporting wider building services across the site. Key ResponsibilitiesCarrying out planned and reactive electrical maintenance across the buildingFault finding, testing, and repair of electrical systemsLighting maintenance, small installations, lamping, and ballast changesEmergency lighting testing and compliance checksMaintenance of control panels and associated systemsMonitoring and supporting BMS systemsMaintenance and fault finding on pumps and motorsSupporting general M&E maintenance where requiredMaintaining and updating logbooks and compliance recordsResponding promptly to breakdowns and reactive tasksDelivering a high standard of client-facing serviceSupporting minor electrical works and small projectsPackageSalary up to £45,000Overtime available26 days holidayMonday to Friday, 08:00 – 17:00Ongoing training and developmentCareer progression opportunitiesRequirementsQualified Electrician – City & Guilds Level 2 & 3 or equivalent18th Edition Wiring Regulations desirableProven track record in commercial electrical maintenanceStrong fault-finding and maintenance experienceMulti-skilled knowledge advantageousGood communication and client-facing skillsAble to provide copies of trade qualificationsThis is an excellent opportunity for an Electrical Maintenance Engineer to join a well-established FM provider on a high-profile commercial site, offering job security, career progression, and an attractive benefits package.....Read more...
Software Architect .NET - Upper Austria (Innviertel region) / Hybrid
(Software Architect, Senior .NET Developer, .NET Software Engineer, Softwareentwickler, Entwickler, C#, WPF, Entity Framework, MS SQL Server, MVVM, dependency injection, SOLID principles, MS Visual Studio, Programmer, Software Architect, Softwareentwickler, Entwickler, .NET Software Engineer, .NET Developer)
My client are one of the fastest growing Software Companies in Austria. Established in the Software Solutions market for over 40 years, they are seeking ambitious Software Architect .NET to architect a new core software product that will revolutionise the industry.
Working in an Agile Scrum team, the successful candidate will be expected to be heavily involved in the development and implementation of strategic architectural decisions, introducing new methods and technologies and evaluating new technologies and tools, as well as conducting proof-of-concepts.
Strong expertise as in software architecture is required, as is a deep knowledge of .NET, specifically C#, WPF and Entity Framework. Knowledge of MVVM, dependency injection, and SOLID principles is expected and excellent communication skills are a must have.
This is an excellent opportunity for a Software Architect .NET to work within a challenging and supportive environment. Top performers can expect to receive their first promotion (and pay rise) within 6 months.
To apply for these positions please send your CV to Nathan Warner at Noir.
Salary: €6k-€6.5k per month (14 months, so €84k-€91k per annum) + Bonus + Pension + Benefits
Location: Upper Austria (Innviertel region) - Hybrid - once a week in the office
Languages: C1 German & fluent English required
Applicants must have the right to work in Austria.
Noir continues to be the leading Microsoft recruitment agency; we can help you make the right career decisions!
NOIRAUSTRIAREC
NOIREUROPEREC
NOIREURNET....Read more...
Telecoms Systems & Application Engineer (OSS, Cramer, Inventory, Automation)
Linux | OSS | Application Support | Production Support | Python | Shell Scripting | Cramer | Network Inventory | Network Automation | Telecoms | Cisco | CCNA | Network Operations
Hybrid working - Newbury, Berkshire, RG14 2FN & remote, home based
@mecscomms is recruiting for an experienced contract Telecoms OSS & Application Support Engineer responsible for supporting and enhancing business-critical telecoms Operational Support Systems (OSS), network inventory platforms and automated network configuration applications.
This is a highly hands-on technical role combining Telecoms Application Support, Production Support, OSS Support, Systems Administration, Database Administration and Network Operations. The successful candidate will support a bespoke telecoms application environment used for network inventory management, service fulfilment, operational automation and network configuration activities, integrating closely with Cramer inventory systems and wider telecoms network infrastructure.
You will possess strong experience supporting production applications, operational support systems, telecoms platforms or network inventory environments, together with scripting, troubleshooting and telecoms network knowledge. Experience within OSS, network inventory management, provisioning, service fulfilment, network automation or telecoms operational support functions would be highly advantageous.
This opportunity is ideally suited to an OSS Support Engineer, Telecoms Application Support Engineer, Production Support Engineer, Network Inventory Engineer, Telecoms Systems Engineer, Operations Support Engineer or Telecoms Systems Administrator with strong Linux, Shell Scripting, Python, Java, HTML skills & a general understanding of telecoms operational systems & network infrastructure.
Role: Telecoms Systems & Application Support Engineer, Production Support Engineer, OSS Support Engineer, Application Support Engineer, Telecoms Systems Administrator, Network & Application Support Engineer
Role Purpose: Support, maintain and enhance critical telecoms production systems, applications and infrastructure whilst ensuring operational stability, service availability, security compliance and successful delivery of system changes across operational environments.
Location: Hybrid working - Newbury, Berkshire, RG14 2FN & remote, home based
Role Type: Temporary, Contract, Full-Time
Start date: ASAP
Duration: 12 months+ temporary contract
Gross Rate: Negotiable, dependent upon experience. Pay rate, inside IR35
Clearence: Security & background screening required. Due to the nature of the work, successful applicants must be eligible to undergo BPSS and SC-level screening. This will include: employment and education verification, credit and financial history checks, advanced identity and right-to-work checks. To meet SC eligibility requirements, candidates must typically have lived in the UK continuously for the last five years.
Technology Stack:
• Linux Administration
• Shell Scripting
• Python
• Java
• HTML
• Cramer Database
• Database Administration
• Telecoms OSS Platforms
• Network Inventory Systems
• Service Fulfilment Systems
• Network Provisioning Platforms
• Network Configuration Automation
• Telecoms Operational Support Systems
• Cisco Networking
• Nokia Transmission
• Microwave Networks
• Enterprise IP Networking
• Network Operations
• Incident Management
• Change Management
• Production Support
• Application Support
• System Monitoring
• Root Cause Analysis
Core Activity:
• Support and maintain business-critical telecoms OSS platforms and production applications
• Administer and support internally developed telecoms operational support systems used for network inventory management and automated network configuration
• Support integrations between OSS platforms and Cramer inventory environments
• Monitor system performance, availability and operational health
• Troubleshoot and resolve production incidents, service issues and application faults
• Support application deployments, configuration changes and production releases
• Develop and maintain automation scripts using Shell Scripting, Python, Java and HTML
• Analyse application logs, system alerts and performance metrics
• Support network automation workflows and operational scripting activities
• Support Cramer database environments and associated administration activities
• Assist with network inventory integrity, reconciliation and data quality activities
• Support operational users of network inventory, provisioning and fulfilment systems
• Implement approved production changes in accordance with change management processes
• Perform root cause analysis and implement preventative solutions
• Produce technical documentation, support records and operational procedures
Deliverables:
• Stable and secure OSS and production environments
• Successful application support and incident resolution
• Reliable network inventory and provisioning platforms
• Effective system monitoring and operational support
• Automated operational processes and scripting solutions
• Successful delivery of production changes and upgrades
• Accurate technical documentation
• Improved operational efficiency and service availability
Working Environment:
• Telecoms Operations Environment
• OSS Support Environment
• Production Support Environment
• Network Operations Environment
• Network Inventory & Provisioning Platforms
• Enterprise Telecommunications Infrastructure
• High Availability Systems
• Critical National Infrastructure Programmes
• Collaborative Technical Teams
Candidate Profile:
Candidates should possess strong experience supporting production applications, telecoms systems or operational environments. You will be technically capable, highly analytical and comfortable working across systems administration, application support, scripting, databases and network technologies.
Your experience is likely to include some of the following:
Essential:
• Production Support and Application Support experience
• Experience supporting OSS, network inventory, service fulfilment, provisioning or network automation platforms
• Linux Systems Administration
• Shell Scripting
• Python scripting and automation
• System Monitoring and Incident Management
• Root Cause Analysis
• Database Administration experience
• Troubleshooting complex technical issues
• Telecoms systems, network operations or operational support environments
• Experience supporting business-critical operational systems
• Change and Release Management
• Technical documentation and reporting
Desirable:
• Cramer Inventory Management
• Network Inventory Management Systems
• OSS/BSS Platforms
• Network Provisioning Platforms
• Service Fulfilment Systems
• Network Automation Tools
• Netcracker
• Inventory Reconciliation
• Telecoms Asset Management
• Fixed Network Operations
• Mobile Network Operations
• Cisco Networking
• Nokia Transmission
• Microwave Networks
• CCNA
• ITIL Foundation
• Linux Administration Certification
• Database Administration Certification
• Telecoms Industry Certifications
Key Traits:
• Strong troubleshooting and fault-resolution capability
• Highly analytical and detail-oriented
• Proactive and self-motivated
• Strong communication and stakeholder engagement skills
• Calm under pressure within operational environments
• Quality and service focused
• Continuous improvement mindset
• Passion for technology, automation and operational excellence
@mecscomms: uniting opportunity with ambition in Telecoms | Media | Technology
@mecscomms is the brand name of MECS Communications Ltd who provide permanent & contract recruitment consultancy service as an Employment Agency & Employment Business.
For more information or a list of current vacancies, please see our web site at mecscomms.co.uk
....Read more...
We are looking for a Senior RF Engineer to lead the design, development, and testing of RF, microwave, and antenna systems used in advanced electronic products.
Key responsibilities
Lead RF and antenna design projects (including modules and sub-contracted work)
Design and optimise microwave PCB layouts and RF systems
Perform RF component selection and system-level analysis
Support antenna design, modelling, testing, and validation
Troubleshoot RF production issues and perform root cause analysis
Work closely with manufacturing, supply chain, quality, and customers
Ensure engineering standards, documentation, and procedures are followed
Key Skills
RF PCB design at microwave frequencies
Strong knowledge of RF components (amplifiers, filters, mixers, PLLs)
RF system design (cascade analysis)
Experience with RF test equipment (VNA, spectrum analysers)
Antenna design knowledge (including array and printed antennas)
Altium and RF simulation tools
Radar or communications background
MATLAB and Python for test automation ....Read more...
We are looking for a Senior RF Engineer to lead the design, development, and testing of RF, microwave, and antenna systems used in advanced electronic products.
Key responsibilities
Lead RF and antenna design projects (including modules and sub-contracted work)
Design and optimise microwave PCB layouts and RF systems
Perform RF component selection and system-level analysis
Support antenna design, modelling, testing, and validation
Troubleshoot RF production issues and perform root cause analysis
Work closely with manufacturing, supply chain, quality, and customers
Ensure engineering standards, documentation, and procedures are followed
Key Skills
RF PCB design at microwave frequencies
Strong knowledge of RF components (amplifiers, filters, mixers, PLLs)
RF system design (cascade analysis)
Experience with RF test equipment (VNA, spectrum analysers)
Antenna design knowledge (including array and printed antennas)
Altium and RF simulation tools
Radar or communications background
MATLAB and Python for test automation ....Read more...
Medical Devices Consultant – Senior Mechanical Engineer – Cambridge
Due to the growth of a leading Medical Devices organisation, we are currently seeking a Senior Mechanical Engineer, Project Manager, Medical Devices Inventor, or Mechanical Design Consultant for a newly approved role. The company is based in Cambridge and boasts some of the most impressive labs globally, which they are currently enhancing even further.
You will collaborate with other experts in Medical Devices who have backgrounds in Mechanical Engineering, Mechanical Design, Electronics Design, Electronics Engineering, Physical Engineering, Biomedical Sciences, and various other skills essential for inventing Medical Technology. Consequently, teamwork will be crucial.
In this role, you will lead projects, necessitating experience as a consultant, project manager, or another role involving interactions with third parties. Additionally, you will apply your skills hands-on, directly contributing to the development of new Medical Devices.
We require several years of experience in Mechanical Design of Medical Devices. Familiarity with any 3D CAD tool is acceptable, as we understand that you can be trained on the necessary tools when required. However, knowledge of SolidWorks would be advantageous.
Most individuals in similar roles hold a degree in a Mechanical Engineering field, but experience takes precedence.
In terms of experience, we welcome candidates ranging from those stepping up to a Senior Mechanical Engineer role to individuals with several years of experience as a Medical Devices Consultant or Senior Mechanical Engineer.
This organisation has an outstanding track record of fostering continuous learning to keep you at the forefront of the Medical Devices sector. Consequently, opportunities for career and skills development are always available.
In addition to these benefits, you will receive an excellent salary (commensurate with your level of experience), a substantial bonus, a generous pension plan, healthcare coverage, complimentary meals throughout the day, life assurance, access to social clubs, wellness programs, an onsite gym, and other exceptional perks that are not commonly offered by most companies.
We anticipate substantial interest in this role, so if you are interested, we recommend submitting your application promptly. The organisation is open to candidates with varying levels of experience. If you possess some of the required skills but not all, it may still be worth applying as training could be provided (though you must have industry experience as a Mechanical Engineer or Mechanical Designer for Medical Devices as a minimum).
For more information, please feel free to call Andrew Welsh, Director of Medical Devices Recruitment and Scientific Recruitment Specialist at Newton Colmore, at +44 121 268 2240. Alternatively, you can submit an application, and a member of our team at Newton Colmore will contact you.
Newton Colmore Consulting is a specialised recruitment company operating within the fields of Medical Devices, Scientific Engineering, Scientific Software, Robotics, Science, Electronics Design, New Product Design, Human Factors, Regulatory Affairs, Quality Assurance, and Field Service Engineering sectors.....Read more...
You will learn how to produce and maintain essential project documentation, including:
Instrument datasheets
Engineering requisitions
Instrument schedules
Cable block diagrams
Instrument hook-up drawings
Other project design documents based on technical specifications
Throughout the apprenticeship, you’ll develop the technical and professional skills needed to contribute to engineering design work with increasing independence.Training:The apprentice will train through a combination of workplace learning and academic study. They will develop practical skills and knowledge by working on real engineering projects with their employer, supported by experienced engineers. This hands-on experience is complemented by structured academic learning.
Delivery at College/Workshop/Classroom:
Year 1: Foundation Degree Level 4 (1 day per week) plus Foundation Competence Level 2 (2–3 days per week) - 3 days total per week
Year 2: Foundation Degree Level 5 (1 day per week)
Years 3 and 4: Top-up degree delivered at Birmingham City University (1 day per week)
Workplace Learning:
Alongside academic study, the apprentice will gain practical experience by working on real engineering projects within the workplace, supported by experienced engineers.
Delivery Method:
Years 1 and 2: Block and day release at James Watt College
Years 3 and 4: Day release at Birmingham City University
Ongoing workplace learning with employer
This blended approach ensures the apprentice gains both valuable industry experience and a strong theoretical understanding of control systems engineering, progressing from foundation level to a top-up degree.Training Outcome:After completing the Level 6 Control Systems Engineer apprenticeship, apprentices can progress to roles such as Control Systems Engineer, Project Engineer, or Automation Engineer. With further experience, they may advance to senior engineering, project management, or specialist technical roles within the engineering sector. There are also opportunities for further study or professional registration, such as working towards Chartered Engineer status.Employer Description:Birwelco Ltd is a leading engineering company specialising in the design, manufacture, and installation of process plant and equipment for the energy and industrial sectors. Birwelco, based in Halesowen, is our design office. As a Carbon Negative business since 2020, we understand the importance of businesses like ours coming together to fight against climate change. With expertise in flares, heaters, and a wide scope of engineering design work, Birwelco is renowned for its design expertise and as the creator of the Sonajet Flare Design. We deliver projects both in the UK and internationally, supporting clients with expert engineering solutions and a commitment to safety and excellence.Working Hours :8:30am - 5:30pm (Monday to Thursday, includes a 45 minute lunch break).
8:30am - 3:00pm (Friday includes a 30 minute lunchbreak).Skills: Communication skills,Attention to detail,Organisation skills,Problem solving skills,Number skills,Team working,Creative,Initiative,Confidence Microsoft Suite,Motivated,Results Driven,Passionate about engineering....Read more...
Microwave Antenna and RF Design Engineer required to join an RF Microwave module design, development, test as well as antenna design, modelling and requirement translation.
Requirements
Microwave frequency PCB Design experience
RF system design knowledge of cascade analysis or receiver to transmitter performance
High Power RF amplifier, Low Noise Amplifiers, Limiters, Circulators, Filters, Mixers, Phase Locked Loop usage design, build and test.
Antenna theory and design with array antennas slotted array and printed antennas.
Altium, Altair, digital electronics, power electronics etc. beneficial.
Responsibilities
Antenna and RF equipment design, development and delivery.....Read more...
Be part of a leading automotive company known for developing vehicles. We are searching for an experienced engineer to lead powertrain concept.
Essential Skills and Qualifications
Over 5 years of design experience in the automotive industry using Catia V5
Strong background in concept development and full vehicle packaging
Expertise in carbon fibre composite design powertrain layout
Solid automotive experience and understanding of industry standards
Skilled in creating detailed technical drawings including geometric tolerancing
Knowledge of mechanical design for automotive systems ( fastening, sealing, and manufacturing processes)
Familiar with DFMEA and risk management in the automotive sector....Read more...
Microwave Antenna and RF Design Engineer required to join an RF Microwave module design, development, test as well as antenna design, modelling and requirement translation.
Requirements
Microwave frequency PCB Design experience
RF system design knowledge of cascade analysis or receiver to transmitter performance
High Power RF amplifier, Low Noise Amplifiers, Limiters, Circulators, Filters, Mixers, Phase Locked Loop usage design, build and test.
Antenna theory and design with array antennas slotted array and printed antennas.
Altium, Altair, digital electronics, power electronics etc. beneficial.
Responsibilities
Antenna and RF equipment design, development and delivery.....Read more...
Be part of a leading automotive company known for developing vehicles. We are searching for an experienced engineer to lead powertrain concept.
Essential Skills and Qualifications
Over 5 years of design experience in the automotive industry using Catia V5
Strong background in concept development and full vehicle packaging
Expertise in carbon fibre composite design powertrain layout
Solid automotive experience and understanding of industry standards
Skilled in creating detailed technical drawings including geometric tolerancing
Knowledge of mechanical design for automotive systems ( fastening, sealing, and manufacturing processes)
Familiar with DFMEA and risk management in the automotive sector....Read more...
