Security Systems Installation Engineer - This new position is seeking an experience install of home security systems. The role will see you working in high end properties where you will be installing state of the art modern security solution for HNWI. The position will see you predominantly working in central London and the surrounding home counties but due to the nature of the position sometimes further afield. You will be expected to work to the highest standards and be able to communicate effectively with both the end user client and the internal team. You will have at least 4years experience within the home security market and bring experience with CCTV, access control, door entry along with all related networking and cabling needed. Hands on skills need to be second to none as well as the ability to follow wiring diagrams and schematics. If you now seek a new role in the world of home security then please send me your full CV today.
YOU MUST BE LIVING IN THE UK AND ALLOWED TO WORK HERE LEGALLY AND SHOW A CLEARLY DEFINED SKILL SET WITHIN THE CV
SECURITY SOLUTIONS CAMERA CCTV INSTALLATION INTEGRATION RESIDENTIAL BESPOKE BPT ACCESS CONTROL TEXECOM HIKVISION SCANTRONIC LIGHTING NETWORK CABLING....Read more...
Security Systems Installation Engineer - This new position is seeking an experience install of home security systems. The role will see you working in high end properties where you will be installing state of the art modern security solution for HNWI. The position will see you predominantly working in central London and the surrounding home counties but due to the nature of the position sometimes further afield. You will be expected to work to the highest standards and be able to communicate effectively with both the end user client and the internal team. You will have at least 4years experience within the home security market and bring experience with CCTV, access control, door entry along with all related networking and cabling needed. Hands on skills need to be second to none as well as the ability to follow wiring diagrams and schematics. If you now seek a new role in the world of home security then please send me your full CV today.
YOU MUST BE LIVING IN THE UK AND ALLOWED TO WORK HERE LEGALLY AND SHOW A CLEARLY DEFINED SKILL SET WITHIN THE CV
SECURITY SOLUTIONS CAMERA CCTV INSTALLATION INTEGRATION RESIDENTIAL BESPOKE BPT ACCESS CONTROL TEXECOM HIKVISION SCANTRONIC LIGHTING NETWORK CABLING....Read more...
Air Conditioning Engineer - Ayrshire - Salary up to £42,000 DOE CBW is excited to announce a fantastic opportunity for an experienced and qualified Air Conditioning Engineer to join a growing FM company on a permanent basis. This mobile role covers Ayrshire and the surrounding areas, providing both planned and reactive maintenance services. The ideal candidate will have previous experience in commercial maintenance and hold a full, clean driving license. This role involves working on air conditioning systems, chillers, and small installations. Key Responsibilities:Carry out planned preventative maintenance (PPM) and reactive maintenance.Service and maintain air conditioning and refrigeration systems, including split systems, VRVs, VAVs, VRFs, AHUs, FCUs, chillers, and other HVAC equipment.Diagnose faults and complete necessary repairs efficiently.Assist with minor installation projects.Ensure compliance with Health & Safety regulations and safe working procedures.Maintain detailed service records and documentation.Provide excellent customer service and liaise with clients effectively.Requirements:NVQ Level 2 & 3 in Refrigeration & Air Conditioning (minimum).F-Gas 2079 Category 1 certification (essential).Previous experience in a maintenance or facilities management environment.Strong knowledge of Health & Safety regulations, Permit to Work procedures, and safe systems of work.Ability to carry out manual tasks, including working at heights and in confined spaces.Willingness to be part of an on-call rota.Proficient in verbal and written communication, with the ability to use mobile devices for reporting.Self-motivated with a proactive approach to problem-solving.A team player who can also work independently.Full UK driving license.Package & Benefits:Competitive salary of up to £42,000 DOE.25 days holiday plus bank holidays.Fully equipped company van (personal use optional).Generous overtime rates.Company pension scheme.....Read more...
Electrical Maintenance Engineer - FM Service Provider - Cannon Street - Up to £45,000 - Tenants SideAn exciting opportunity to join an established building services company based in Cannon Street has arisen! CBW Staffing Solutions is currently recruiting for an Electrical Maintenance Engineer to be based in a law firm located right by Cannon Street station. He or she will be required to carry out PPMs and reactive building maintenance alongside the maintenance team on site. The successful candidate will have a strong understanding of Facilities Maintenance and have a proven track record in Electrical & general building maintenance. In return, the company is offering a competitive salary of up to £45,000, overtime, further training, and a potential route into further career progression. Hours of workMonday to Friday, 10:00am to 19:00pmKey Duties & ResponsibilitiesLighting (Small installation, Fault-finding, Lamping, etc)Emergency lighting testsControl PanelsChanging BallastBMS System - Monitor (i.e. Hot & cold)Maintain and update Log booksPlumbing - Unblocking toiletsPumps, motorsPackageUp to £45,00025 days holiday + Bank holidaysFurther trainingCompany pensionCallout 1 in 3/4 - £100 P/WRequirementsElectrically qualified - City & Guilds Level 2&3 (Required)18th Edition (Required)Must be able to provide copies of your trade certificatesA proven track record in commercial building maintenanceMulti-skilledGood communication skillsClient FacingIf you are interested in this opportunity please send your CV to Archie Reed of CBW Staffing Solutions for more information.....Read more...
Mobile Electrical Engineer - 1 in 14 Callout - Mixed Portfolio - FM Service Provider - London & Home Counties - Up to £48,000An exciting opportunity to join an established building services company based across London has arisen! CBW Staffing Solutions is currently recruiting for a Mobile Electrical Maintenance Engineer to be based on a mixed portfolio of high-end residential and commercial sites (Mainly commercial) located across London and Home Counties. He or she will be required to carry out PPMs and reactive building maintenance to both electrical and mechanical systems on site. The successful candidate will have a strong understanding of Facilities Maintenance and have a proven track record in Electrical, Mechanical & general building maintenance. In return, the company is offering a competitive salary of up to £48,000, overtime, further training, and a potential route into further career progression. Hours of workMonday to Friday8:00 am to 17:00 pm1 in 14 CalloutKey Duties & ResponsibilitiesLighting (Small installation, Fault-finding, Lamping, etc)Emergency lighting testsControl PanelsChanging BallastBMS System - Monitor (i.e. Hot & cold)Maintain and update Log booksPlumbing - Unblocking toiletsPumps, motorsPackageUp to £48,00025 days holiday + Bank holidaysPrivate use availableFurther trainingCompany pensionRequirementsElectrically qualified - City & Guilds Level 2&3 (Required)18th Edition (Required)Must be able to provide copies of your trade certificatesA proven track record in commercial building maintenanceMulti-skilledGood communication skillsClient FacingIf you are interested in this opportunity, please send your CV to Charlie Long of CBW Staffing Solutions for more information.....Read more...
Mobile Electrical Engineer - Mixed Portfolio - FM Service Provider - London & Home Counties - Up to £48,000An exciting opportunity to join an established building services company based across London has arisen! CBW Staffing Solutions is currently recruiting for a Mobile Electrical Maintenance Engineer to be based on a mixed portfolio of high-end residential and commercial sites located across London and the Home Counties. He or she will be required to carry out PPMs and reactive building maintenance to both electrical and mechanical systems on site. The successful candidate will have a strong understanding of Facilities Maintenance and have a proven track record in Electrical, Mechanical & general building maintenance. In return, the company is offering a competitive salary of up to £48,000, overtime, further training, and a potential route into further career progression. Hours of workMonday to Friday8:00 am to 17:00 pmCallout - £150 Standby AllowanceKey Duties & ResponsibilitiesLighting (Small installation, Fault-finding, Lamping, etc)Emergency lighting testsControl PanelsChanging BallastBMS System - Monitor (i.e. Hot & cold)Maintain and update Log booksPlumbing - Unblocking toiletsPumps, motorsPackageUp to £48,00020 days holiday + Bank holidays - Increasing to 22 after 3 yearsPrivate use availableFurther trainingCompany pensionRequirementsElectrically qualified - City & Guilds Level 2&3 (Required)18th Edition (Required)Must be able to provide copies of your trade certificatesA proven track record in commercial building maintenanceMulti-skilledGood communication skillsClient FacingIf you are interested in this opportunity, please send your CV to Archie Reed of CBW Staffing Solutions for more information.....Read more...
Junior Project Manager Sittingbourne £35,000 - £45,000 Basic + Great Working Environment + Product Training + Private Healthcare + Enhanced Pension Scheme + Package Are you looking for a Junior Project Manager role as an engineer with experience in heavy industrial machinery, wanting to be off the tools, where your attention to detail truly matters? Work for a company where you’ll be valued, trusted, and recognised for your expertise. You’ll play a key role in managing multi-million pound turnkey projects - involved in a full lifecycle from assessing drawings to overseeing installation and commissioning. This recession proof business has become a market-leading manufacturer of heavy industrial grinding and classification equipment, serving many industries like cement, aggregates, building materials and more across the UK and internationally. This is a great opportunity for either an established Project Manager or a hands-on industrial engineer looking to move off the tools. You’ll be joining a stable and growing team where your input will make a visible difference and you can build a long-term, rewarding career. Your Role As A Junior Project Manager Will Include:
* Junior Project Manager role – Large value in excess of £1million - Heavy industrial engineering * Management of multi-million pound grinding and classification projects - Customer engagement throughout * Understanding, reviewing and creating detailed project documentation * Assessing mechanical and electrical drawings produced by the design team * Liaising with customers, suppliers, the design team and engineers. * Some international travel required As A Junior Project Manager You Must Have:
* A background as a hands on engineer or similar wanting to come off the tools * Experience with industrial machinery, process equipment or mechanical / electrical systems * Mechanical and electrical engineering experience required * Electrical control system knowledge is advantageous * Knowledge of engineering project documentation and standards * Strong computer literacy skills – ideally with SolidWorks or similar CAD packages. * Based within a commutable distance to SittingbournePlease apply or contact Georgia Daly on 07458163040 for immediate considerationKeywords: junior project manager, trainee, mechanical, electrical, design engineer, manufacturing, industrial, Sittingbourne, Kent, Iwade, Faversham, Rochester, Isle of Sheppey, Chatham, GillinghamThis vacancy is being advertised by Future Engineering Recruitment Ltd. The services of Future Engineering Recruitment Ltd are that of an Employment Agency. Please visit our website at futureengineer.co.uk to view other positions we are currently handling. Future Engineering Recruitment Ltd can only accept applications from candidates who have a valid legal permit or right to work in the United Kingdom. Potential candidates who do not have this right or permit, or are pending an application to obtain this right or permit should not apply as your details will not be processed.....Read more...
Apprentice Electrician for the role of electrical testing and inspection engineer.
To learn to carry out a range of electrical testing, including:
Electrical installation condition report
Emergency light testing
Thermal imaging
Portable appliance testing and data analysis
This will also include:
Repair and installation work, to offices, banks, sporting arenas, corporate headquarters, public sectors, colleges, universities, distribution, schools, government and commercial outlets
To carry out work to a high standard and ensure it is carried out in strict compliance with the health and safety at work act, and any other relevant legislation covering safety in the workplace for self and others
To learn to complete all necessary paperwork and NICEIC records to current legislative standards, to prevailing performance standards and in line with project solvers procedures
To attend college and complete coursework on time and to a high standard
To produce, maintain and be responsible for work details to document experience
To take on additional responsibilities in years two and three
To carry out all necessary administrative work associated with departmental management requirements such as using PC or laptop to accurately and timely record all processes from receiving jobs through to completion including timesheets
To liaise and work with other trades and apprentices as required
To understand and comply with all health and safety policies and procedures
To attend and fully participate in regular training and reviews with mentor and line managers
To undertake additional duties in line with capabilities as required
Training:The training will be a mix of practical learning and theory covering things like:
Health and safety legislation
Environmental legislation
Practices and procedures for overseeing and organising the work environment
Cable termination
Inspection and testing
Fault finding
Electrical principles
Functional Skills
Candidates will be required to achieve the Level 3 Electrotechnical qualification (Installation) or (Maintenance)
https://www.instituteforapprenticeships.org/apprenticeship-standards/installation-electrician-and-maintenance-electrician-v1-0Training Outcome:There is the chance of progression, also further training will be provided, With a good chance of a permanent post at the end of the apprenticeship.Employer Description:Project Solver is a Millennium-born company offering expert insight to the building services industry on a national scale.
Project Solver has impressive experience and a unique approach to problems. Project Solver cuts the waffle, promises a realistic analysis and most importantly a solution. Not surprisingly, this has meant that Project Solver has been successful in attracting high profile clients.Working Hours :4 days a week. Start time 8.00am, finish time 5.00pm, with 1-hour for lunch each day and 1 day a week at college. Working days TBC.Skills: Communication skills,IT skills,Attention to detail,Organisation skills,Customer care skills,Problem solving skills,Presentation skills,Administrative skills,Number skills,Analytical skills,Logical,Team working,Creative,Initiative,Non judgemental,Patience,Physical fitness,Enthusiasm/Motivation,Trustworthy,Reliable....Read more...
Mechanical Maintenance Engineer - FM Service Provider - Commercial Building - Aldgate, East London - Up to £45000 per annum Exciting opportunity to work for a leading FM service provider situated in Aldgate, East London. I am currently recruiting for a Multi-Skilled Mechanical Maintenance Engineer to be based in a static role in Aldgate, East London which is a large commercial office building.The successful candidate will be a fully qualified Mechanical Maintenance Engineer with C&G / NVQ level 2 & 3 and a proven track record in commercial building maintenance.He or she will be required to carry out M&E/Fabric planned and reactive maintenance in a large team on a large building responsible for all the landlord services. Working with the maintenance team of 3 engineers on site including the supervisor, you will be required have an understanding/hands on experience of the below. In return the company are offering a competitive salary of £45,000, overtime and career progression.Lighting (Small installation, Fault-finding, Lamping, Changing ballast's, Control panel, Power distribution)Emergency lighting & Fire Alarm Test'sPresurisation UnitsHVAC plantPlant room maintenanceAir Conditioning - Air Handling Units / Fan Coil Unit (Filter changes, cleaning)Chillers - Re-setPumps, MotorsWater Treatment (Temperature checks / Not dosing)Plumbing - Unblocking toilets, changing taps, seals etcBMS System - Monitor (i.e. Hot & Colds)UPS Systems - Monitor / Take readingsGeneral building fabricEscort sub contractorsHours of workMonday to Friday (40 hour week / Overtime available at weekends)Hours 08:00am to 17:00pm (8 hour days) - Every Third Week the hours are 10:00am to 19:00pm PackageBasic Salary up to £45,00025 Days Annual Leave + Bank HolidaysBirthday off as HolidayPension Excellent Benefits package Internal and External Training CoursesGenuine career progression Lots of Overtime available. RequirementsMechanically Qualified - You must be able to provide copies of your trade certificatesCity & Guilds/NVQ Level 2&3 A proven track record in commercial or property maintenanceExcellent customer service skillsHonest, hard working and reliable Please send your CV to Dan Barber at Cbw Staffing Solutions for more Information!....Read more...
Mobile Chiller Engineer - FM service provider - London & M25 - Paying Up to £60,000 + Package CBW Staffing Solutions are currently recruiting for a Mobile Chiller Engineer to work on behalf of an Air Conditioning & Refrigeration company based in SE London/Kent. The successful candidate will be a fully qualified Chiller Engineer with NVQ Level 2/3 in Refrigeration & Air Conditioning, F-Gas Category, City & Guilds 2079, or equivalent and a have strong understanding in the installation, maintenance, and repair of commercial and industrial chiller systems. As the Chiller Engineer you will be required to attend a number of commercial sites, Universities, Hospitals and offices covering London & SE, where you will carry out PPM on diverse chiller systems, including air-cooled, water-cooled, absorption, and adiabatic chillers, to ensure optimal performance and longevity. You will be self-motivated, technically proficient, customer-focused, and possess excellent problem-solving abilities. In return the company is offering a competitive salary of up to £60,000, overtime, further training and a potential route into further career progression. Hours of work Monday to Friday - 08:00am to 17:00pm Key ResponsibilitiesPreventative Maintenance (PPM): Conduct routine preventative maintenance on diverse chiller systems, including air-cooled, water-cooled, absorption, and adiabatic chillers, to ensure optimal performance and longevity.Diagnose complex mechanical, electrical, and refrigeration faults efficiently and accurately, performing effective repairs on components such as compressors, condensers, evaporators, control systems, pumps, and pipework.Carry out F-Gas leak detection, recovery, and recharging in strict compliance with current F-Gas regulations and environmental standards.Proactively identify opportunities for system optimization and efficiency improvements, advising clients on best practices and potential upgrades.Liaise professionally and directly with clients, providing clear explanations of work carried out, identifying any further required works, and building strong working relationships.Complete accurate service reports, timesheets, expense submissions, and other administrative tasks promptly and efficiently, utilizing mobile technology.Adhere strictly to all company and site-specific health and safety regulations, including risk assessments and method statements.Participate in an out-of-hours on-call rota for emergency breakdowns as required which is currently every 14 weeks.Provide technical guidance and support to junior technicians or apprentices when appropriate. In return, my client is offering a very competitive package including:25 days holiday + Bank HolidaysVan & Fuel Card providedTravel time: 1 hour each wayTablet & Work phone providedFull company uniformLots of overtime availableQualifications & ExperienceNVQ Level 2/3 in Refrigeration & Air Conditioning, City & Guilds 2079, or equivalentCurrent F-Gas Category 1 certification (Essential).Strong track record of working on various commercial and industrial chiller manufacturers.Full, clean UK Driving Licence (Essential)Strong understanding of refrigeration cycles, thermodynamics, electrical control systems, and HVAC principles.Proven ability to read and interpret electrical schematics, wiring diagrams, and technical drawings to diagnose faults.....Read more...
To support the servicing, maintenance, and repair of gas CHP (Combined Heat and Power) systems while undertaking a structured apprenticeship program
Assist in the planned and reactive maintenance of gas CHP units across customer sites
Shadow experienced engineers to learn diagnostic and fault-finding techniques.
Support the installation, commissioning, and decommissioning of CHP systems
Record service data accurately using company reporting tools and software
Maintain tools, equipment, and company vehicle in good condition (if applicable)
Attend all required training courses (on-the-job and classroom-based)
Build a working knowledge of CHP system components including engines, generators, controls, and gas systems
Develop customer-facing professionalism while working on live sites
Always adhere to health and safety protocols
Training:Apprentices will be required to attend training at least x1 day per week to complete necessary mandatory training and units associated with the apprenticeship.
The apprentice will be required to complete:
Work towards gaining a full Qualification
Employment Rights and Responsibilities
Skills, Knowledge, and Behaviours
Standard and End Point Assessment
Functional Skills in English, maths, and ICT (if required)
Other training will be provided by the employer as required to enable the fulfilment of the job role. Product specific training provided as part of our internal CPD by uk providers and our training facility in Germany. Training Outcome:
The apprentice will gain the technical skills, safety awareness, and experience required to progress toward becoming a qualified CHP Service Engineer, Commissioning Engineer
Employer Description:Manufacture, install and maintain gas fired CHP plants throughout the UK.Working Hours :Monday - Friday, 8.00am - 5.00pmSkills: Attention to detail,Communication skills,IT skills,Organisation skills,Customer care skills,Problem solving skills,Administrative skills,Analytical skills,Number skills,Logical,Team working,Creative,Initiative,Physical fitness....Read more...
Electrical or Mechanical Maintenance Engineer – FM Service Provider – Commercial Building – Paddington, London – £42,000 per annum CBW Staffing Solutions are currently recruiting a Maintenance Engineer with either electrical or mechanical bias to be based in a commercial building in Paddington Street, London. He or she will be required to carry out planned and reactive building maintenance across the site as part of a team. The successful candidate will have a good understanding of Facilities Maintenance and have a proven track record in building maintenance. In return, the company is offering a competitive salary of £42,000, overtime, further training and a potential route into further career progression. In return, my client is offering a very competitive package including:A basic salary of £42,000Monday to Friday – 07:00am – 16:00pm / 08:00am – 17:00pm rotating weekly25 days holiday plus bank holidaysOvertime availableCompany Pension SchemeExcellent career progression opportunitiesKey Duties & ResponsibilitiesLighting (Small installation, Fault-finding, Lamping, etc)Emergency lighting testsControl PanelsChanging BallastBMS System - Monitor (i.e. Hot & cold)Carry out all aspects of M&E/Fabric maintenanceMaintain and update Log booksPlumbing - Unblocking toiletsPumps, motorsWater flushing / temp checks logsBoosted water pumpsFire damper maintenanceAttending Client meetingGeneral PPMsControl of sub-contractorsPermit to work systemMaintaining Site logbooksRequirementsElectrically or mechanically qualified - Level 2 or 3City & Guilds - 18th EditionJob logic experience (Preferred)Must be able to provide copies of your trade certificatesA proven track record in commercial building maintenanceMulti-skilledGood communication skillsClient Facing Please send your CV to Alex Denton of CBW Staffing Solutions to avoid missing out on the role !....Read more...
Electrical Maintenance Engineer – FM Service Provider - Commercial Building – Waterloo, London - £45,000An exciting opportunity to join an established FM service provider based in Waterloo, London has arisen! CBW Staffing Solutions are currently recruiting an Electrical Maintenance Engineer based in a mixed-use commercial building near Waterloo, London. He or she will be required to carry out planned and reactive building maintenance alongside the maintenance team on site (4 Person Team).The successful candidate will have a strong understanding of Facilities Maintenance and have a proven track record in Electrical building maintenance. In return, the company is offering a competitive salary of £45,000, overtime, further training and a potential route into further career progression. In return, my client is offering a very competitive package including:A basic salary of £45,000Plenty of overtime 25 days holiday1 in 4 call outCompany Pension SchemeExcellent career progression opportunitiesWithin a 5-minute walk of Waterloo StationHours of workMonday to Friday – 07:00 am to 16:00 pm/ 08:00 am to 17:00 pm/ 09:00 am to 18:00 pmKey duties & ResponsibilitiesLighting (Small installation, Fault-finding, Lamping, etc)Emergency lighting testsControl PanelsChanging BallastBMS System - Monitor (i.e. Hot & cold)Carry out all aspects of M&E/Fabric maintenanceMaintain and update Log booksPlumbing - Unblocking toiletsPumps, motorsRequirementsElectrically qualified - City & Guilds Level 2&3City & Guilds - 18th EditionMust be able to provide copies of your trade certificatesA proven track record in commercial building maintenanceMulti-skilledGood communication skillsClient Facing Please send your CV to Alex Denton of CBW Staffing Solutions to avoid missing out on the role !....Read more...
Manufacturing Process Engineer required to introduce the latest manufacturing technologies and machines to ensure the smooth introduction of new products into production.
Experience
Manufacturing processes, methodologies, technologies and planning.
Project Management of resources and budgets to meet project targets.
Manufacturing safety regulations and practices, ensure the protection of workers and the environment.
Lean Manufacturing implementing lean strategies into existing production processes continuously identifying and eliminating inefficiencies in the manufacturing process.
Understanding of the assembly, test and finishing processes related to building and construction equipment production.
Familiarity of Siemens Teamcenter is desirable.
Six Sigma project leadership to improve quality and manufacturing processes.
Engineering or a related degree.
Lean Manufacturing and Six Sigma certification advantageous.
Role
Identify opportunities for process improvement or new technology opportunities, assess their impact, and model capital investment.
Lead New Product Introduction and Improvement Projects impacting technology, efficiency and quality from initiation through to production completion. Ensuring they are delivered on time, within budget, and to scope.
Work with cross-functional teams to develop manufacturing process solutions using tools such as process flows, PFMEAs, control plans, and lean methodologies. Ensure processes are safe, efficient, and meet manufacturing needs.
Develop equipment specifications and installation requirements, ensuring the equipment is safe and aligned with the needs of the manufacturing process.
Drive DFM and best manufacturing practices, ensuring manufacturability and efficiency in product design.....Read more...
Manufacturing Process Engineer required to introduce the latest manufacturing technologies and machines to ensure the smooth introduction of new products into production.
Experience
Manufacturing processes, methodologies, technologies and planning.
Project Management of resources and budgets to meet project targets.
Manufacturing safety regulations and practices, ensure the protection of workers and the environment.
Lean Manufacturing implementing lean strategies into existing production processes continuously identifying and eliminating inefficiencies in the manufacturing process.
Understanding of the assembly, test and finishing processes related to building and construction equipment production.
Familiarity of Siemens Teamcenter is desirable.
Six Sigma project leadership to improve quality and manufacturing processes.
Engineering or a related degree.
Lean Manufacturing and Six Sigma certification advantageous.
Role
Identify opportunities for process improvement or new technology opportunities, assess their impact, and model capital investment.
Lead New Product Introduction and Improvement Projects impacting technology, efficiency and quality from initiation through to production completion. Ensuring they are delivered on time, within budget, and to scope.
Work with cross-functional teams to develop manufacturing process solutions using tools such as process flows, PFMEAs, control plans, and lean methodologies. Ensure processes are safe, efficient, and meet manufacturing needs.
Develop equipment specifications and installation requirements, ensuring the equipment is safe and aligned with the needs of the manufacturing process.
Drive DFM and best manufacturing practices, ensuring manufacturability and efficiency in product design.....Read more...
Electrical Compliance Engineer – Fixed Wire Testing & Remedial Works - Perthshire - £38,000 To carry out electrical inspection and testing (EICR) and associated remedial works within retail, commercial, and office environments, including the completion of NICEIC certification. The role requires the ability to complete work to a high standard, maintain full compliance with BS7671:18th Edition Wiring Regulations, and work independently using initiative to deliver safe, compliant electrical systems. Hours of work: Monday - Friday 12.00 - 21.00 (Over time rate paid after 17.30 Duties & Responsibilities: Undertake electrical inspection and testing, including Fixed Wire Testing and associated remedial works to a high standard.Ensure all work is completed in compliance with BS7671: 18th Edition Wiring Regulations.Deliver work that meets or exceeds customer expectations for quality and professionalism.Maintain compliance with all relevant statutory regulations and company procedures.Provide a professional service while representing the organisation positively to clients.Take a proactive approach to customer liaison and ensure any concerns are addressed promptly or escalated to management.Maintain accurate personal, job, and vehicle records in line with company operating procedures.Ensure full awareness of contractual obligations and customer requirements at all times.Comply with company Health, Safety, Environmental and Quality (HSEQ) policies and procedures.Ensure all administrative requirements, documentation, records, and certification are completed accurately and submitted within required timescales.Qualifications Recognised electrical qualifications including:City & Guilds 2365 or 2357 Level 3 and NVQ 2356 with AM2or City & Guilds 2330 Level 3 Electrical Installation with NVQ 2356 and AM2or City & Guilds 236 / 2360 Electrical Installations Parts 1 & 2Additional required qualifications:City & Guilds 18th Edition Wiring Regulations (BS7671:2018) preferably including Amendment 2.Preferred qualifications:City & Guilds 2391 or 2394/2395 Inspection and TestingRecognised electrical apprenticeshipJIB AccreditationIPAF / PASMAFull UK Driving LicenceTechnical skills:Competent in completing electrical certification in accordance with BS7671:2018.Proficient with Microsoft Office applications (Word, Excel). ExperienceMinimum 5 years’ experience in electrical installation or maintenance within commercial, retail, or office environments.Experience in electrical building services maintenance including:Fault findingInstallationMaintenanceElectrical inspection and testingProduction of EICR reportsExperience delivering both reactive and planned preventative maintenance (PPM) services.Experience working within facilities management or building services environments.Strong understanding of health and safety procedures including risk assessments and method statements.Salary & BenefitsBasic salary up to £38,000Overtime paid after 5.30 pm Monday - Friday at 1.525 days holiday plus bank holidaysLife insurancePrivate health care....Read more...
Electrical Maintenance Engineer – Plastics ManufacturingLocation: Huddersfield Salary: £45,000 – £50,000 per annum Shifts: 4 on / 4 off (Days & Nights) Industry: Plastics / Polymer Processing
The OpportunityWe are recruiting for an Electrical Maintenance Engineer to join a leading plastics manufacturing business based in Huddersfield. Operating on a 4 on / 4 off rotating shift pattern, you’ll be responsible for maintaining and improving a range of automated and electrically driven equipment used in extrusion, injection moulding, and material handling operations.This is a hands-on role within a highly automated environment, offering long-term stability, technical challenge, and opportunities to develop with a forward-thinking engineering team.
Key Responsibilities
Perform planned preventive maintenance (PPM) and reactive breakdown repairs across electrical systems and automated machinery.Fault-find and repair on PLC-controlled equipment, drives, motors, sensors, and temperature control systems.Maintain and calibrate equipment associated with extruders, injection moulding machines, conveyors, and blending systems.Diagnose faults using electrical drawings, schematics, and diagnostic tools.Support installation and commissioning of new machinery and production lines.Ensure all work complies with site safety procedures and electrical regulations (17th/18th Edition).Collaborate with mechanical engineers and production teams to drive root cause analysis and continuous improvement initiatives.
About You
Time-served or qualified Electrical Engineer (NVQ Level 3 / HNC / ONC or equivalent).Strong background in industrial or plastics manufacturing maintenance.Proven ability to fault-find on PLC systems (Siemens / Allen Bradley preferred).Experience with AC/DC drives, servo systems, and control panels.Knowledge of thermoforming, extrusion, or injection moulding machinery advantageous.Excellent analytical and problem-solving skills with a proactive approach.Comfortable working on a 4 on / 4 off shift pattern (days & nights).
What’s on Offer
Competitive salary: £45,000 – £50,000 DOE.4 on / 4 off rotating shift pattern for a balanced work schedule.Overtime and training opportunities.Supportive, safety-focused environment with ongoing investment in automation and equipment.Genuine career progression within a stable, growing plastics manufacturer.
If you’re an electrically biased engineer with solid experience in plastics processing or heavy automation, this is an excellent opportunity to join a modern, well-equipped facility with real technical variety.....Read more...
• Get Paid while you learn• Hands-On Experience with real-world tools and machinery• Training From The Pros – We’ll teach you everything you need to know to become a boss in manufacturing• Growth Potential – This apprenticeship is just the start. We’re all about helping you learn & achieve your goals
ROLE
The Apprentice Engineer will be responsible for developing skills in the maintenance, and optimisation of systems that combine mechanical and electrical engineering.
Through hands-on training and mentorship, the apprentice will learn to support the:
development
installation
maintenance of automated systems, robotics, and/or machinery while ensuring operational efficiency and safety.
The Apprentice Engineer will be expected to work towards and complete the apprenticeship program with a focus on self-development, progression, and ownership.
At the end of the program, they should aim to be a competent maintenance engineer and be able to work well as a key part of a shift team or alone on a multitude of equipment with minimal extra support.Training:Together with invaluable commercial and practical experience, you’ll gain several academic and vocational qualifications throughout your time with your employer and Make UK, which are fully paid for, including: ● Advanced Manufacturing Engineering Practical Foundation Training – in year 1, in 6 week blocks to include 4 weeks at Make UK and 2 weeks in company● Advanced Manufacturing Engineering Workplace Competence Training - in years 2 to 4 in company● Level 3 BTEC Diploma in Advanced Manufacturing Engineering Development Knowledge - in Years 1, 2 & 3 on block release to Make UK● In house training in line with your requirements.● Further qualifications deemed necessary by your employer
On completion of your studies, you will achieve your full apprenticeship certification that will prove competence as a Level 3 Mechatronics Maintenance Engineering Technician.Training Outcome:Should the candidate successfully complete the apprenticeship, possibility of a full time Mechanical/Electrical maintenance Engineering role within the business.
Potential opportunities for further development for a HNC/HND.Employer Description:Forterra has established itself as one of the leading manufacturers of building products in the UK Construction industry, made possible only through the talent, ingenuity and commitment of everyone who works in our business. Our employees are the key to our success and together we keep each other safe and create ground-breaking innovations in an environment where everyone is valued, included and encouraged to make the most of their talents.
We have an amazing opportunity for someone to join Forterra as an apprentice and learn how to become a multi-skilled maintenance engineer, covering both mechanical and electrical.Working Hours :At company you will be scheduled to work between 7am and 6pm (shifts to be agreed) Monday to FridaySkills: Communication skills,Attention to detail,Organisation skills,Customer care skills,Problem solving skills,Number skills,Analytical skills,Logical,Team working,Creative,Initiative,Non judgemental,Patience....Read more...
Get Paid while you learn
Hands-On Experience with real-world tools and machinery
Training From The Pros – We’ll teach you everything you need to know to become a boss in manufacturing
Growth Potential – This apprenticeship is just the start. We’re all about helping you learn & achieve your goals
ROLE
The Apprentice Engineer will be responsible for developing skills in the maintenance and optimisation of systems that combine mechanical and electrical engineering.
Through hands-on training and mentorship, the apprentice will learn to support the:
Development
Installation
Maintenance of automated systems, robotics, and/or machinery while ensuring operational efficiency and safety
The Apprentice Engineer will be expected to work towards and complete the apprenticeship program with a focus on self-development, progression, and ownership.
At the end of the program, they should aim to be a competent maintenance engineer and be able to work well as a key part of a shift team or alone on a multitude of equipment with minimal extra support.Training:Together with invaluable commercial and practical experience, you’ll gain several academic and vocational qualifications throughout your time with your employer and Make UK, which are fully paid for, including:
Advanced Manufacturing Engineering Practical Foundation Training – in year 1, in 6 week blocks to include 4 weeks at Make UK and 2 weeks in company
Advanced Manufacturing Engineering Workplace Competence Training - in years 2 to 4 in company
Level 3 BTEC Diploma in Advanced Manufacturing Engineering Development Knowledge - in Years 1, 2 & 3 on block release to Make UK
In house training in line with your requirements
Further qualifications deemed necessary by your employer
On completion of your studies, you will achieve your full apprenticeship certification that will prove competence as a Level 3 Mechatronics Maintenance Engineering Technician.Training Outcome:Should the candidate successfully complete the apprenticeship, there is the possibility of a full-time Mechanical/Electrical Maintenance Engineering role within the business.
Potential opportunities for further development for a HNC/HND.Employer Description:Forterra has established itself as one of the leading manufacturers of building products in the UK Construction industry, made possible only through the talent, ingenuity and commitment of everyone who works in our business. Our employees are the key to our success and together we keep each other safe and create ground-breaking innovations in an environment where everyone is valued, included and encouraged to make the most of their talents.
We have an amazing opportunity for someone to join Forterra as an apprentice and learn how to become a multi-skilled maintenance engineer, covering both mechanical and electrical.Working Hours :At the company, you will be scheduled to work between 7am and 6pm (shifts to be agreed) Monday to Friday.Skills: Communication skills,Attention to detail,Organisation skills,Customer care skills,Problem solving skills,Number skills,Analytical skills,Logical,Team working,Creative,Initiative,Non judgemental,Patience....Read more...
Get Paid while you learn
Hands-On Experience with real-world tools and machinery
Training From The Pros – We’ll teach you everything you need to know to become a boss in manufacturing
Growth Potential – This apprenticeship is just the start. We’re all about helping you learn & achieve your goals
ROLE:
The Apprentice Engineer will be responsible for developing skills in the maintenance, and optimisation of systems that combine mechanical and electrical engineering.
Through hands-on training and mentorship, the apprentice will learn to support the:
Development
Installation
Maintenance of automated systems, robotics, and/or machinery while ensuring operational efficiency and safety
The Apprentice Engineer will be expected to work towards and complete the apprenticeship program with a focus on self-development, progression, and ownership.
At the end of the program, they should aim to be a competent maintenance engineer and be able to work well as a key part of a shift team or alone on a multitude of equipment with minimal extra support.Training:Together with invaluable commercial and practical experience, you’ll gain several academic and vocational qualifications throughout your time with your employer and Make UK, which are fully paid for, including:
Advanced Manufacturing Engineering Practical Foundation Training – in year 1, in 6 week blocks to include 4 weeks at Make UK and 2 weeks in company
Advanced Manufacturing Engineering Workplace Competence Training - in years 2 to 4 in company
Level 3 BTEC Diploma in Advanced Manufacturing Engineering Development Knowledge - in Years 1, 2 & 3 on block release to Make UK
In house training in line with your requirements.
Further qualifications deemed necessary by your employer
On completion of your studies, you will achieve your full apprenticeship certification that will prove competence as a Level 3 Mechatronics Maintenance Engineering Technician.Training Outcome:Should the candidate successfully complete the apprenticeship, possibility of a full time Mechanical/Electrical maintenance Engineering role within the business.
Potential opportunities for further development for an HNC/HND. Employer Description:Forterra has established itself as one of the leading manufacturers of building products in the UK Construction industry, made possible only through the talent, ingenuity and commitment of everyone who works in our business. Our employees are the key to our success and together we keep each other safe and create ground-breaking innovations in an environment where everyone is valued, included and encouraged to make the most of their talents.
We have an amazing opportunity for someone to join Forterra as an apprentice and learn how to become a multi-skilled maintenance engineer, covering both mechanical and electrical.Working Hours :At company you will be scheduled to work between 7am and 6pm (shifts to be agreed) Monday to FridaySkills: Communication skills,Attention to detail,Organisation skills,Customer care skills,Problem solving skills,Number skills,Analytical skills,Logical,Team working,Creative,Initiative,Non judgemental,Patience....Read more...
Get Paid while you learn
Hands-On Experience with real-world tools and machinery
Training From The Pros – We’ll teach you everything you need to know to become a boss in manufacturing
Growth Potential – This apprenticeship is just the start. We’re all about helping you learn & achieve your goals
Role
The Apprentice Engineer will be responsible for developing skills in the maintenance, and optimisation of systems that combine mechanical and electrical engineering.
Through hands-on training and mentorship, the apprentice will learn to support the:
Development
Installation
Maintenance of automated systems, robotics, and/or machinery while ensuring operational efficiency and safety
The Apprentice Engineer will be expected to work towards and complete the apprenticeship program with a focus on self-development, progression, and ownership.
At the end of the program, they should aim to be a competent maintenance engineer and be able to work well as a key part of a shift team or alone on a multitude of equipment with minimal extra support.Training:Together with invaluable commercial and practical experience, you’ll gain several academic and vocational qualifications throughout your time with your employer and Make UK, which are fully paid for, including:
Advanced Manufacturing Engineering Practical Foundation Training – in year 1, in 6 week blocks to include 4 weeks at Make UK and 2 weeks in company
Advanced Manufacturing Engineering Workplace Competence Training - in years 2 to 4 in company
Level 3 BTEC Diploma in Advanced Manufacturing Engineering Development Knowledge - in Years 1, 2 & 3 on block release to Make UK
In house training in line with your requirements.
Further qualifications deemed necessary by your employer
On completion of your studies, you will achieve your full apprenticeship certification that will prove competence as a Level 3 Mechatronics Maintenance Engineering Technician.Training Outcome:Should the candidate successfully complete the apprenticeship, possibility of a full time Mechanical/Electrical maintenance Engineering role within the business.
Potential opportunities for further development for a HNC/HND.Employer Description:Forterra has established itself as one of the leading manufacturers of building products in the UK Construction industry, made possible only through the talent, ingenuity and commitment of everyone who works in our business. Our employees are the key to our success and together we keep each other safe and create ground-breaking innovations in an environment where everyone is valued, included and encouraged to make the most of their talents.
We have an amazing opportunity for someone to join Forterra as an apprentice and learn how to become a multi-skilled maintenance engineer, covering both mechanical and electrical.Working Hours :At company you will be scheduled to work between 7.00am and 6.00pm, Monday to Friday.Skills: Communication skills,Attention to detail,Organisation skills,Customer care skills,Problem solving skills,Number skills,Analytical skills,Logical,Team working,Creative,Initiative,Non judgemental,Patience....Read more...
Get paid while you learn
Hands-on experience with real-world tools and machinery
Training from the pros - We’ll teach you everything you need to know to become a boss in manufacturing
Growth potential - This apprenticeship is just the start. We’re all about helping you learn & achieve your goals
Role:
The Apprentice Engineer will be responsible for developing skills in the maintenance, and optimisation of systems that combine mechanical and electrical engineering.
Through hands-on training and mentorship, the apprentice will learn to support the:
Development
Installation
Maintenance of automated systems, robotics, and/or machinery while ensuring operational efficiency and safety
The Apprentice Engineer will be expected to work towards and complete the apprenticeship program with a focus on self-development, progression, and ownership.
At the end of the program, they should aim to be a competent maintenance engineer and be able to work well as a key part of a shift team or alone on a multitude of equipment with minimal extra support.Training:Together with invaluable commercial and practical experience, you’ll gain several academic and vocational qualifications throughout your time with your employer and Make UK, which are fully paid for, including:
Advanced Manufacturing Engineering Practical Foundation Training - in year 1, in 6-week blocks to include 4 weeks at Make UK and 2 weeks in company
Advanced Manufacturing Engineering Workplace
Competence Training - in years 2 to 4 in company
Level 3 BTEC Diploma in Advanced Manufacturing Engineering Development Knowledge - in Years 1, 2 & 3 on block release to Make UK
In house training in line with your requirements
Further qualifications deemed necessary by your employer
On completion of your studies, you will achieve your full apprenticeship certification that will prove competence as a Level 3 Mechatronics Maintenance Engineering Technician.Training Outcome:Should the candidate successfully complete the apprenticeship, possibility of a full-time Mechanical/Electrical maintenance Engineering role within the business.
Potential opportunities for further development for a HNC/HND.Employer Description:Forterra has established itself as one of the leading manufacturers of building products in the UK Construction industry, made possible only through the talent, ingenuity and commitment of everyone who works in our business. Our employees are the key to our success and together we keep each other safe and create ground-breaking innovations in an environment where everyone is valued, included and encouraged to make the most of their talents.
We have an amazing opportunity for someone to join Forterra as an apprentice and learn how to become a multi-skilled maintenance engineer, covering both mechanical and electrical.Working Hours :At company you will be scheduled to work between 7am and 6pm (shifts to be agreed) Monday to FridaySkills: Communication skills,Attention to detail,Organisation skills,Customer care skills,Problem solving skills,Number skills,Analytical skills,Logical,Team working,Creative,Initiative,Non judgemental,Patience....Read more...
Get Paid while you learn
Hands-On Experience with real-world tools and machinery
Training From The Pros - We’ll teach you everything you need to know to become a boss in manufacturing
Growth Potential – This apprenticeship is just the start. We’re all about helping you learn & achieve your goals
The Apprentice Engineer will be responsible for developing skills in the maintenance, and optimisation of mechanical systems.
Through hands-on training and mentorship, the apprentice will learn to support the:
Development
Installation
Maintenance of automated systems, robotics, and/or machinery while ensuring operational efficiency and safety
The Apprentice Engineer will be expected to work towards and complete the apprenticeship program with a focus on self-development, progression, and ownership.
At the end of the program, they should aim to be a competent maintenance engineer and be able to work well as a key part of a shift team or alone on a multitude of equipment with minimal extra support.Training:Together with invaluable commercial and practical experience, you’ll gain several academic and vocational qualifications throughout your time with your employer and Make UK, which are fully paid for, including:
Advanced Manufacturing Engineering Practical Foundation Training - in year 1, in 6 week blocks to include 4 weeks at Make UK and 2 weeks in company
Advanced Manufacturing Engineering Workplace
Competence Training - in years 2 to 4 in company
Level 3 BTEC Diploma in Advanced Manufacturing Engineering Development Knowledge - in Years 1, 2 & 3 on block release to Make UK
In house training in line with your requirements
Further qualifications deemed necessary by your employer
On completion of your studies, you will achieve your full apprenticeship certification that will prove competence as a Level 3 Mechatronics Maintenance Engineering Technician.Training Outcome:
Should the candidate successfully complete the apprenticeship, possibility of a full time Mechanical/Electrical maintenance Engineering role within the business
Potential opportunities for further development for a HNC/HND
Employer Description:Forterra has established itself as one of the leading manufacturers of building products in the UK Construction industry, made possible only through the talent, ingenuity and commitment of everyone who works in our business. Our employees are the key to our success and together we keep each other safe and create ground-breaking innovations in an environment where everyone is valued, included and encouraged to make the most of their talents.
We have an amazing opportunity for someone to join Forterra as an apprentice and learn how to become a multi-skilled maintenance engineer, covering both mechanical and electrical.Working Hours :At company you will be scheduled to work between 7.00am and 6.00pm (shifts to be agreed) Monday to Friday.Skills: Communication skills,Attention to detail,Organisation skills,Customer care skills,Problem solving skills,Number skills,Analytical skills,Logical,Team working,Creative,Initiative,Non judgemental,Patience....Read more...
Get paid while you learn
Hands-on experience with real-world tools and machinery
Training from the pros – We’ll teach you everything you need to know to become a boss in manufacturing
Growth Potential – This apprenticeship is just the start. We’re all about helping you learn & achieve your goals
Role
The Apprentice Engineer will be responsible for developing skills in the maintenance, and optimisation of systems that combine mechanical and electrical engineering.
Through hands-on training and mentorship, the apprentice will learn to support the:
Development
Installation
Maintenance of automated systems, robotics, and/or machinery while ensuring operational efficiency and safety
The Apprentice Engineer will be expected to work towards and complete the apprenticeship program with a focus on self-development, progression, and ownership.
At the end of the program, they should aim to be a competent maintenance engineer and be able to work well as a key part of a shift team or alone on a multitude of equipment with minimal extra support.Training:Together with invaluable commercial and practical experience, you’ll gain several academic and vocational qualifications throughout your time with your employer and Make UK, which are fully paid for, including:
Advanced Manufacturing Engineering Practical Foundation Training – in year 1, in 6 week blocks to include 4 weeks at Make UK and 2 weeks in company
Advanced Manufacturing Engineering Workplace Competence Training - in years 2 to 4 in company
Level 3 BTEC Diploma in Advanced Manufacturing Engineering Development Knowledge - in Years 1, 2 & 3 on block release to Make UK
In house training in line with your requirements
Further qualifications deemed necessary by your employer
On completion of your studies, you will achieve your full apprenticeship certification that will prove competence as a Level 3 Mechatronics Maintenance Engineering Technician.Training Outcome:Should the candidate successfully complete the apprenticeship, possibility of a full time Mechanical/Electrical maintenance Engineering role within the business.
Potential opportunities for further development for a HNC/HND.Employer Description:Forterra has established itself as one of the leading manufacturers of building products in the UK Construction industry, made possible only through the talent, ingenuity and commitment of everyone who works in our business. Our employees are the key to our success and together we keep each other safe and create ground-breaking innovations in an environment where everyone is valued, included and encouraged to make the most of their talents.
We have an amazing opportunity for someone to join Forterra as an apprentice and learn how to become a multi-skilled maintenance engineer, covering both mechanical and electrical.Working Hours :At company you will be scheduled to work between 7.00am and 6.00pm, Monday to Friday. Shifts to be agreed.Skills: Communication skills,Attention to detail,Organisation skills,Customer care skills,Problem solving skills,Number skills,Analytical skills,Logical,Team working,Creative,Initiative,Non judgemental,Patience....Read more...
Get paid while you learn
Hands-on experience with real-world tools and machinery
Training from the pros – We’ll teach you everything you need to know to become a boss in manufacturing
Growth potential – This apprenticeship is just the start. We’re all about helping you learn & achieve your goals
Role
The Apprentice Engineer will be responsible for developing skills in the maintenance, and optimisation of systems that combine mechanical and electrical engineering.
Through hands-on training and mentorship, the apprentice will learn to support the:
Development
Installation
Maintenance of automated systems, robotics, and/or machinery while ensuring operational efficiency and safety
The Apprentice Engineer will be expected to work towards and complete the apprenticeship program with a focus on self-development, progression, and ownership.
At the end of the program, they should aim to be a competent maintenance engineer and be able to work well as a key part of a shift team or alone on a multitude of equipment with minimal extra support.Training:Together with invaluable commercial and practical experience, you’ll gain several academic and vocational qualifications throughout your time with your employer and Make UK, which are fully paid for, including:
Advanced Manufacturing Engineering Practical Foundation Training – in year 1, in 6 week blocks to include 4 weeks at Make UK and 2 weeks in company
Advanced Manufacturing Engineering Workplace Competence Training - in years 2 to 4 in company
Level 3 BTEC Diploma in Advanced Manufacturing Engineering Development Knowledge - in Years 1, 2 & 3 on block release to Make UK
In house training in line with your requirements.
Further qualifications deemed necessary by your employer
On completion of your studies, you will achieve your full apprenticeship certification that will prove competence as a Level 3 Mechatronics Maintenance Engineering Technician.Training Outcome:Should the candidate successfully complete the apprenticeship, possibility of a full time Mechanical/Electrical maintenance Engineering role within the business.
Potential opportunities for further development for a HNC/HND.Employer Description:Forterra has established itself as one of the leading manufacturers of building products in the UK Construction industry, made possible only through the talent, ingenuity and commitment of everyone who works in our business. Our employees are the key to our success and together we keep each other safe and create ground-breaking innovations in an environment where everyone is valued, included and encouraged to make the most of their talents.
We have an amazing opportunity for someone to join Forterra as an apprentice and learn how to become a multi-skilled maintenance engineer, covering both mechanical and electrical.Working Hours :At the company, you will be scheduled to work between 7.00am and 6.00pm, Monday to Friday. Shifts to be agreed.Skills: Communication skills,Attention to detail,Organisation skills,Customer care skills,Problem solving skills,Number skills,Analytical skills,Logical,Team working,Creative,Initiative,Non judgemental,Patience....Read more...
