Maintenance and Repair:
Support senior engineers with routine maintenance on ancillary equipment
Learn how to diagnose and assist in the repair of mechanical and electrical issues
Participate in supervised disassembly and reassembly of machinery for fault identification
Technical Support and Learning:
Provide basic technical support under guidance from experienced engineers
Assist in the installation and setup of new machinery and equipment
Engage in continuous learning to understand equipment functionality and maintenance practices
Skill Development and Problem Solving:
Develop problem-solving skills by observing and assisting in troubleshooting
Maintain learning logs and records of issues encountered to track progress
Engineering Support:
Offer overall engineering support for the Ancillary department, assisting senior engineers to ensure machinery operates efficiently and effectively
Work closely with other engineers and technicians to gain knowledge and learn best practices
Safety and Compliance:
Adhere to all health and safety regulations, ensuring a safe working environment
Learn about the relevant standards and regulations to ensure all machinery and equipment comply
Training:An apprenticeship allows you to earn a wage, gain valuable work experience and industry specific competence. You will be expected to work towards the Maintenance and operations engineering technician level 3 apprenticeship standard.
As part of your apprenticeship, and dependent on your prior attainment, you may be required to complete English and mathsFunctional Skills which is an integral part of your apprenticeship. Upon successful completion you will be awarded additional certificates of recognition for these qualifications.Training Outcome:
Potential for full time employment for the right candidate/ progression to a higher apprenticeship
Employer Description:Glenair UK has provided interconnect innovation into the military aerospace sector for over 40 years. We have solutions waiting for you in stock and a team of industry leading product specialists dedicated to solving your interconnect design requirements.Working Hours :Monday to Friday. Shifts to be confirmed.Skills: Communication skills,IT skills,Attention to detail,Organisation skills,Problem solving skills,Number skills,Analytical skills,Logical,Team working,Initiative....Read more...
Service, maintenance and installation of heavy-duty heating and cooling systems and components
Health and safety and environmental legislation and working practices
Fault diagnosis and rectification through root cause analysis
Safe handling of refrigerants (including ammonia and CO2)
Electrical systems
Communication and customer care
Training:Maintenance and Operations Engineering Technician Level 3.
You'll be assigned a personal mentor and start by shadowing our experienced engineers on site, gaining hands-on experience and expanding your skill set from day one. Our training team will keep in touch with regular catch-ups to support your development. You'll study in day or block release periods at college alongside apprentices from other companies and industries.Training Outcome:After completing your apprenticeship, you can continue to progress through Star's engineer development pathway with salary increases along the way. Some of our engineers have gone on to become service and maintenance managers, regional managers or even directors. You will also have transferable engineering skills that can be valuable to other departments, such as sales or design, should you wish to try something different. A number of our engineers have also gone on to study at degree level. The possibilities are endless!Employer Description:Star Refrigeration is the UK’s largest independent industrial refrigeration engineering company, founded in 1970, working with customers from design to commissioning and maintenance, supported by a nationwide branch structure. The company is comprised of six business units and currently has around 400 employees throughout the group. We are an Investors in People Platinum and Investors in Young People Gold accredited employer and recognise the important role our employees play in our success which is why they are at the heart of everything we do. We aim to support and encourage our employees to pursue their interests and provide development opportunities to ensure they have rewarding and fulfilling careers.Working Hours :Monday - Thursday, 8:30am - 5.00pm and Friday, 8:30am - 4.00pm.Skills: Communication skills,Attention to detail,Customer care skills,Problem solving skills,Number skills,Analytical skills,Logical,Team working,Initiative,Patience,Physical fitness....Read more...
Role & responsibilities:
Modification of standard seals to suit non-standard equipmentBespoke seal design, using standard seal face geometry, for non-standard applications and equipment
Design of special test equipment to suit specific applications
Creation of new stock codes and special seal bills of materials to aid administration
Daily liaison with internal and external customers (including end users, sales engineers, and distributors from the UK and overseas)
Daily liaison with workshops and inspection departments on engineering issues for both standard and special seals; solving problems and agreeing concessions
Assisting the Technical department with special seal enquiriesProviding assistance to the assembly team on testing issues for standard and special seals
N.B. This list is not exhaustive; the job holder is required to carry out reasonable tasks within their level of skill and ability (as requested by senior management).Training:You will study on a Level 3 Engineering & Manufacturing Support Technician pathway. On completion of this, you will gain a qualification in Engineering at Level 3 standard.
During the first year of the apprenticeship, your learning will take place at the University of Sheffield’s AMRC Training Centre based at Catcliffe, Rotherham, for an initial block of study on a full-time basis. After this, you will attend the Training Centre for one day a week for knowledge study.Training Outcome:Completion of the University of Sheffield’s AMRC Training Centre apprenticeships is a nationally recognised qualification that is acknowledged and respected by employers across the world. These can open the door to many more opportunities, such as Engineering Management and Project Engineering positions across a range of sectors worldwide.Employer Description:At AESSEAL® we design and manufacture sealing solutions for a sustainable future.
We combine both our own success with environmental protection and being a good corporate citizen.
Through our investment in innovative new sealing solutions we enable our customers in a wide range of industries to meet the complex needs of society both now and in the future.
We believe in operating in an ethical and sustainable manner, providing sealing solutions to our customers that improve reliability and help reduce energy and water consumption. Our world class manufacturing facilities use the latest in machine tool technology and our systems and processes enable us to be the worlds largest homogeneous mechanical seal manufacturer.
By investing in pioneering technology, we simplify the whole ordering process and respond quickly to customers’ needs – whatever, wherever. We aim to exceed expectation consistently: in delivery, quality, reliability and service. We’re challenging industry standards, challenging our competitors, challenging thinking – and challenging to become world market leader.Working Hours :You will work Monday to Friday. Your start and finish times, including your shift pattern, will be determined by the employing company.Skills: Communication skills,Attention to detail,Organisation skills,Problem solving skills,Analytical skills....Read more...
Join a leading manufacturing company as an Electrical Maintenance Engineer, this is a fantastic opportunity for those looking to take the next step in their career. This role offers excellent benefits, including a competitive salary, overtime opportunities, and continuous training to support your growth as an Electrical Maintenance Engineer.What’s in it for you as Electrical Maintenance Engineer?
Salary: £53,750 (Circa 3% increase pending)
Hours: Days and Nights, 6am to 6pm, 6pm to 6am, 4 on, 4 off shift pattern
Location: Near Ollerton, Nottinghamshire
Overtime - Paid at 1.5 and 2x
Benefits: an extensive benefits program such as matched pension of up to 10%
Holidays: 29 days holiday (Including bank holidays)
Training: progression and career development available, including PLC training courses
Job Security: Grow within a market leader offering long-term career progression
Key Responsibilities of the Electrical Maintenance Engineer:
Responsible for plant wide proactive and reactive Electrical Maintenance activities to ensure the optimum performance of the factory.
Covering planned and reactive maintenance activities across manufacturing lines
Help to drive plant improvements and increased efficiencies
Required Experience & Qualifications needed as an Electrical Maintenance Engineer:
You will need to hold the following, Apprenticeship in Electrical Maintenance - ONC, BTEC Level 3, HNC/HND and NVQ Level 3 Electrical Qualifications, City & Guilds Level 3
Previous experience as an Electrical Maintenance Engineer - Maintenance Technician - Engineering Technician - covering Motors, Inverters, fault finding on PLC’s, HMI’s, 3 phase, Process controls systems and safety circuits
Previous experience of undertaking reactive maintenance and following PPM schedules within a manufacturing environment
....Read more...
Electronic Assembly Engineer
Are you a hands-on Engineering Technician with extensive experience in assembling, installing, and repairing electronic devices? If so, this could be the perfect opportunity for you.
Our client is a specialist supplier of RF devices, primarily serving the medical sector. They are seeking a skilled professional to join their expanding team.
Key Responsibilities for this Electronic Assembly Engineer job:
Assemble, install, and repair electronic devices.
Perform precision soldering to a high standard.
Liaise with customers and engage effectively with stakeholders.
Organise shipments to customers and company headquarters.
Key Skills and Experience for this Electronic Assembly Engineer job:
Minimum of 5 years’ hands-on experience in soldering, repair, and installation of electronic devices.
Ideally, a degree or equivalent qualification in an electronic or electrical discipline.
Strong communication skills and experience in customer liaison.
To apply for this role, please send your CV to Nick at NDrain@redlinegroup.Com or call 01582 878828.....Read more...
Railway Engineering design role
CAD – 3D modelling
CAD - Technical drawing
Digital – Automation, programming
Office-based role using computers for design work, calculations, planning and presenting
Opportunities to visit site, be involved in design reviews etc.
Working alongside an experienced Technician
Potential progression to L6 Apprenticeship
Training Outcome:Our apprentices are employed on a permanent basis, so you'll continue to progress with Arup once you've completed your course. Employer Description:Arup is a global firm of designers, planners, engineers, consultants and technical experts. We use our skills to make a positive difference in the world. This is a brilliant opportunity to build a creative career designing and delivering exciting work in infrastructure, building design and specialist technical services.Working Hours :Shift to be confirmed.Skills: Communication skills,Attention to detail,Organisation skills,Problem solving skills,Analytical skills,Logical,Team working....Read more...
Role & responsibilities:
To manufacture components to AESSEAL drawings in stainless 316L and Phosphor Bronze on multiple machines.
Work to tight deadlines in a pressurised working environment to fulfil our corporate promise of exceptional customer service.
Verifying and editing CAM programmes in order to ensure components are manufactured to the desired quality and efficiency standards.
Interpret complex engineering drawings.
Perform quality checks as per AESSEAL procedures using measuring equipment and/or CMM.
Strictly adhere to safe working practices and highlight any potential hazards to relevant team leaders.
Maintain a clean work area.
N.B. this list is not exhaustive, the job holder is required to carry out reasonable tasks within their level of skill and ability.Training:You will study on a Level 3 Machining Technician pathway. On completion of this, you will gain a qualification in Engineering at Level 3 standard.
During the first year of the apprenticeship, your learning will take place at the University of Sheffield’s AMRC Training Centre based at Catcliffe, Rotherham, for an initial block of study on a full-time basis. After this, you will attend the Training Centre for one day a week for knowledge study.Training Outcome:Completion of the University of Sheffield’s AMRC Training Centre apprenticeships are nationally recognised qualifications which are acknowledged and respected by employers across the world. These can open the door to many more opportunities, such as Engineering Management and Project Engineering positions across a range of sectors worldwide.Employer Description:At AESSEAL® we design and manufacture sealing solutions for a sustainable future.
We combine both our own success with environmental protection and being a good corporate citizen.
Through our investment in innovative new sealing solutions we enable our customers in a wide range of industries to meet the complex needs of society both now and in the future.
We believe in operating in an ethical and sustainable manner, providing sealing solutions to our customers that improve reliability and help reduce energy and water consumption. Our world class manufacturing facilities use the latest in machine tool technology and our systems and processes enable us to be the worlds largest homogeneous mechanical seal manufacturer.
By investing in pioneering technology, we simplify the whole ordering process and respond quickly to customers’ needs – whatever, wherever. We aim to exceed expectation consistently: in delivery, quality, reliability and service. We’re challenging industry standards, challenging our competitors, challenging thinking – and challenging to become world market leader.Working Hours :You will work Monday to Friday. Your start and finish times including your shift pattern will be determined by the employing company.Skills: Communication skills,Attention to detail,Organisation skills,Problem solving skills,Analytical skills....Read more...
As an Engineering Design Technician within the Energy Team in Manchester, you will join a team that provides services to help clients transition to a net-zero future. This includes developing strategies for energy efficiency. The team advises on renewable energy integration and implementing technologies like carbon capture and storage (CCS) for industries. Training:
You will attend College to study an Advanced Apprenticeship and gain a Level 3 qualification, as well as completing your End-Point Assessment
You will be enrolled onto a bespoke internal development programme to help you to attain the knowledge, skills and behaviours to successfully achieve your apprenticeship, and support your career
You will have the support of your team, line manager, mentor and buddy as well as a dedicated early careers team
Training Outcome:
You will be enrolled onto a bespoke internal development programme to help you to attain the knowledge, skills and behaviours to successfully achieve your apprenticeship, and support your career
You will have the support of your team, line manager, mentor and buddy as well as a dedicated early careers team
Employer Description:As one of the world’s leading engineering consultancy firms, at WSP we’re passionate about the big questions, and big answers, naturally. For us that’s all about reaching beyond the expected to do work that’ll make a profound impact felt long into the future. We engineer projects that will help societies grow for lifetimes to come. We’ve been involved in many high-profile projects like The Shard, Crossrail, M1 Smart Motorway and the London Olympic & Paralympic Route Network.Working Hours :Monday to Friday, 37.5 hours per week. Exact working hours to be confirmed.Skills: Communication skills,IT skills,Attention to detail,Organisation skills,Problem solving skills,Logical,Team working....Read more...
What you’ll be doing as an ICA Engineer Apprentice:
Learn to carry out planned maintenance, general repairs, and equipment modifications under guidance
Test, inspect, and troubleshoot systems using condition-based monitoring
Become fully trained to use Programmable Logic Controllers (PLC’s) and SCADA (Supervisory Control and Data Acquisition) systems
Work with the instruments and technology that monitor and manage Thames Water’s water and wastewater operations across the network
Training:
Knowledge, skills, behaviours as set out in the standard Engineering Maintenance Technician Level 3
City & Guilds Diploma in Engineering (single discipline)
You’ll train with Basingstoke College of Technology through on-campus or online sessions, with travel and accommodation covered in line with our travel expense policy
Training Outcome:Permanent contract with a 36-month structured programme.Employer Description:Who are we? We’re the UK’s largest water and wastewater company, with more than 16 million customers relying on us every day to supply water for their taps and toilets. We want to build a better future for all, helping our customers, communities, people, and the planet to thrive. It’s a big job and we’ve got a long way to go, so we need help from passionate and skilled people, committed to making a difference and getting us to where we want to be in the years and decades to comeWorking Hours :Hours: 38-hour week over four working days plus one training day, with a 7:30 am start. Monday - Friday, exact working hours to be confirmed.Skills: Communication skills,IT skills,Attention to detail,Organisation skills,Customer care skills,Problem solving skills,Number skills,Analytical skills,Logical,Team working,Initiative....Read more...
As an Engineering Technician within the Building Services Design Teams in Guildford or Basingstoke, you will collaborate with a dynamic group of professionals to create innovative and sustainable building solutions that enhance the built environment.
Your tasks may include:
Assisting in the development of digital models and drawings for building services projects.
Supporting the team in conducting technical analysis and simulations to optimise building performance.
Contributing to the preparation of digital 3D models, reports and documentation for client presentations and project submissions
Training:
You will attend College to study a Higher Apprenticeship in Construction Design and build and gain a Level 4 qualification, as well as completing your End-Point Assessment.
You will be enroled into a bespoke internal development programme to help you to attain the knowledge, skills and behaviours to successfully achieve your apprenticeship, and support your career
You will have the support of your team, line manager, mentor and buddy, as well as a dedicated early careers team
Training Outcome:
Ongoing employment and career progression
Employer Description:As one of the world’s leading engineering consultancy firms, at WSP we’re passionate about the big questions, and big answers, naturally. For us that’s all about reaching beyond the expected to do work that’ll make a profound impact felt long into the future. We engineer projects that will help societies grow for lifetimes to come. We’ve been involved in many high-profile projects like The Shard, Crossrail, M1 Smart Motorway and the London Olympic & Paralympic Route Network.Working Hours :Monday to Friday, 37.5 hours per week. Exact working hours to be confirmed.Skills: Communication skills,IT skills,Attention to detail,Organisation skills,Problem solving skills,Logical,Team working....Read more...
Get Paid while you learn
Hands-On Experience with real-world tools and machinery
Training From The Pros - We’ll teach you everything you need to know to become a boss in manufacturing
Growth Potential – This apprenticeship is just the start. We’re all about helping you learn & achieve your goals
The Apprentice Engineer will be responsible for developing skills in the maintenance, and optimisation of mechanical systems.
Through hands-on training and mentorship, the apprentice will learn to support the:
Development
Installation
Maintenance of automated systems, robotics, and/or machinery while ensuring operational efficiency and safety
The Apprentice Engineer will be expected to work towards and complete the apprenticeship program with a focus on self-development, progression, and ownership.
At the end of the program, they should aim to be a competent maintenance engineer and be able to work well as a key part of a shift team or alone on a multitude of equipment with minimal extra support.Training:Together with invaluable commercial and practical experience, you’ll gain several academic and vocational qualifications throughout your time with your employer and Make UK, which are fully paid for, including:
Advanced Manufacturing Engineering Practical Foundation Training - in year 1, in 6 week blocks to include 4 weeks at Make UK and 2 weeks in company
Advanced Manufacturing Engineering Workplace
Competence Training - in years 2 to 4 in company
Level 3 BTEC Diploma in Advanced Manufacturing Engineering Development Knowledge - in Years 1, 2 & 3 on block release to Make UK
In house training in line with your requirements
Further qualifications deemed necessary by your employer
On completion of your studies, you will achieve your full apprenticeship certification that will prove competence as a Level 3 Mechatronics Maintenance Engineering Technician.Training Outcome:
Should the candidate successfully complete the apprenticeship, possibility of a full time Mechanical/Electrical maintenance Engineering role within the business
Potential opportunities for further development for a HNC/HND
Employer Description:Forterra has established itself as one of the leading manufacturers of building products in the UK Construction industry, made possible only through the talent, ingenuity and commitment of everyone who works in our business. Our employees are the key to our success and together we keep each other safe and create ground-breaking innovations in an environment where everyone is valued, included and encouraged to make the most of their talents.
We have an amazing opportunity for someone to join Forterra as an apprentice and learn how to become a multi-skilled maintenance engineer, covering both mechanical and electrical.Working Hours :At company you will be scheduled to work between 7.00am and 6.00pm (shifts to be agreed) Monday to Friday.Skills: Communication skills,Attention to detail,Organisation skills,Customer care skills,Problem solving skills,Number skills,Analytical skills,Logical,Team working,Creative,Initiative,Non judgemental,Patience....Read more...
Get paid while you learn
Hands-on experience, with real-world tools and machinery
Training from the pros. We’ll teach you everything you need to know to become a boss in manufacturing
Growth potential. This apprenticeship is just the start. We’re all about helping you learn & achieve your goals
Role
The Apprentice Engineer will be responsible for developing skills in the maintenance, and optimisation of mechanical systems.
Through hands-on training and mentorship, the apprentice will learn to support the:
Development
Installation
Maintenance of automated systems, robotics, and/or machinery while ensuring operational efficiency and safety.
The Apprentice Engineer will be expected to work towards and complete the apprenticeship program with a focus on self-development, progression, and ownership.
You will also be trained in a variety of welding disciplines to facilitate repairs to complex systems.
At the end of the program, they should aim to be a competent maintenance engineer and be able to work well as a key part of a shift team or alone on a multitude of equipment with minimal extra support.Training:Together with invaluable commercial and practical experience, you’ll gain several academic and vocational qualifications throughout your time with your employer and Make UK, which are fully paid for, including:
Advanced Manufacturing Engineering Practical Foundation Training – in year 1, in 6 week blocks to include 4 weeks at Make UK and 2 weeks in company
Advanced Manufacturing Engineering Workplace Competence Training - in years 2 to 4 in company
Level 3 BTEC Diploma in Advanced Manufacturing Engineering Development Knowledge - in Years 1, 2 & 3 on block release to Make UK
In house training in line with your requirements.
Further qualifications deemed necessary by your employer
On completion of your studies, you will achieve your full apprenticeship certification that will prove competence as a Level 3 Mechatronics Maintenance Engineering Technician.Training Outcome:Should the candidate successfully complete the apprenticeship, possibility of a full time Mechanical maintenance Engineering role within the business.
Potential opportunities for further development for a HNC/HND.Employer Description:Forterra has established itself as one of the leading manufacturers of building products in the UK Construction industry, made possible only through the talent, ingenuity and commitment of everyone who works in our business. Our employees are the key to our success and together we keep each other safe and create ground-breaking innovations in an environment where everyone is valued, included and encouraged to make the most of their talents.
We have an amazing opportunity for someone to join Forterra as an apprentice and learn how to become a multi-skilled maintenance engineer, covering both mechanical and electrical.Working Hours :At the company, you will be scheduled to work between 7.00am and 6.00pm, Monday to Friday. Shifts to be agreed.Skills: Communication skills,Attention to detail,Organisation skills,Customer care skills,Problem solving skills,Number skills,Analytical skills,Logical,Team working,Creative,Initiative,Non judgemental,Patience....Read more...
Our apprenticeship is geared toward training the next generation of fully-fledged Service Technicians/Mechanics. But what does a Service Technician/Mechanic do? Service Technicians/Mechanics service and repair light vehicles such as cars up to 3.5 tonnes. Service Technicians/Mechanics are trained in all areas of vehicle mechanics and electronics, from engine and exhaust systems to air conditioning and security features.
The duties of a Service Technician/Mechanic may include:
Servicing vehicles– carrying out checks and maintenance according to the manufacturers’ guidelines
Repairing and replacing faulty parts and components
Advising the Service Receptionists about required repairs
Producing time estimates
Maintaining repair and service records
Please note, the Service Technician/Mechanic role varies slightly by employer based upon the specific needs within the location. We are looking for people with an interest in engineering and technology to thrive in this role. While full technical training will be provided, desired skills include problem solving, attention to detail and an aptitude for applied logic. Application numbers for the JLR retail apprenticeship programme are high so we're looking for you to demonstrate why you stand out from the crowd. We're not looking for the finished article; rather we want to identify those people that are ambitious and demonstrate a willingness to learn, who are excited by the prospect of working with our fantastic, technologically advanced vehicles and really engage in the recruitment process. Key personal skills to demonstrate include:
A willingness to learn
Teamwork
Engineering interest
Quality focus
Personal responsibility and resilience
Training:Training will be delivered using a combination of virtual classroom remote learning and face-to-face block release weeks at our state-of-the-art training centre. Successful applicants must be prepared to travel to the Jaguar Land Rover Academy, in Leamington Spa, to complete their apprenticeship training. All training-related costs are fully covered as part of the programme, including travel, accommodation, and meals. In the workplace, your personal, dedicated mentor will support your continued learning as you apply the skills and knowledge you have gained through the remote sessions and at the Jaguar Land Rover Academy. This apprenticeship combines off-the-job training with on-the-job learning, and you will be supported every step of the way. On successful completion of the three year programme, you will receive the following:
Level 3 Apprenticeship Standard in Motor Vehicle Service and Maintenance Technician (Light Vehicle)
Certificate in Automotive Refrigerant Handling
JLR specific certifications
Training Outcome:There are lots of opportunities to develop your career within our expanding retail network. Your early development is carefully mapped through your apprenticeship journey with your learning focused toward achieving an industry recognised qualification. Embedded within your training are the JLR global training materials. At the end of your apprenticeship programme, you'll undertake the JLR Level 2 assessment, the first step on the JLR internal learner journey. This is the grounding for your future development within the network and our Learner Management System, Excellence will guide you through your short, medium, and long term career path. Employer Description:JLR is the UK's largest automotive manufacturer, built around two iconic British car brands: Land Rover, the world’s leading manufacturer of premium all-wheel drive vehicles; and Jaguar, one of the world’s premier luxury sports saloon and sports car marques. The company employs almost 38,000 people globally and supports around 275,000 more through our retailers, suppliers, and local businesses. We are looking for people who share our passion to join our highly successful retail apprenticeship programme. We recognise the importance in identifying talented people to become the next generation of professional retail employees and help us achieve our ambitious growth plans. Working Hours :Monday– Friday.
0830– 1730.
Possibility of Saturday workings and / or shifts.
Working week will be confirmed on application.Skills: Communication skills,IT skills,Attention to detail,Organisation skills,Customer care skills,Problem solving skills,Presentation skills,Administrative skills,Number skills,Analytical skills,Logical,Team working,Creative,Initiative,Non judgemental,Patience,Physical fitness....Read more...
Field Service Engineer London £30,000 - £40,000 Basic + Family Feel Environment + Job Satisfaction + Training + Progression + Van + Work-Life Balance + Stability + Regional Patch + Immediate Start
Are you a Field Service Engineer looking for a role with real job satisfaction? Do you want to join a growing, family-run business that genuinely values its engineers, offers structured training, and long-term progression?
This is a fantastic opportunity to join a rapidly expanding company within the coffee sector, working across a regional patch. With major contracts secured and more growth planned, this business is investing heavily in training centres and developing its engineers. You’ll be part of a close-knit team where you’re known by name, not number, and given the support to progress into more technical or senior roles.
Your Job As A Field Service Engineer Will Include:
Installation, servicing, maintaining, and repairing coffee machines
Fault finding, testing, and diagnosing electro-mechanical equipment
Covering a regional patch across London / South East
Providing excellent customer service and building strong client relationships
Working on a variety of equipment across hospitality, retail, and commercial sites
As A Field Service Engineer You Will Have:
Electro-mechanical background - coffee machines, vending, white goods or similar
Strong fault-finding and diagnostic skills (multimeter use essential)
Full UK driving licence (essential)
Experience working in a field service environment
Live commutable to London / South East and happy to travel regionally
Apply now or contact Billy on 07458 163030 for immediate consideration
Keywords: coffee engineer, coffee machine technician, catering equipment, espresso machines, espresso machines, vending, London, Enfield, Romford, Bromley, Dartford, Sutton, Twickenham, Wembley, Watford
This vacancy is being advertised by Future Engineering Recruitment Ltd. The services of Future Engineering Recruitment Ltd are that of an Employment Agency.
Please visit our website at futureengineer.co.uk to view other positions we are currently handling.
Future Engineering Recruitment Ltd can only accept applications from candidates who have a valid legal permit or right to work in the United Kingdom. Potential candidates who do not have this right or permit, or are pending an application to obtain this right or permit, should not apply as your details will not be processed.....Read more...
As part of our Engineering Maintenance team at our Fridge Plant in Darlaston, you’ll help with planned maintenance on our recycling machinery.
You will:
Help with planned maintenance on our recycling machinery
Working alongside experienced engineers to understand faults and fix breakdowns
Carry out basic mechanical or electrical tasks while developing your confidence
Learn how to read technical drawings and follow clear maintenance instructions
Use tools and equipment safely, with full training provided
Record work accurately using our systems
About You:
We’re looking for someone who:
Is eager to learn and develop
Enjoys working with people and communicating clearly
Can stay organised and manage their time
Works well both in a team and independently
Has a positive, “can-do” attitude
Is 18 or older (due to insurance purposes) and holds a full UK driving licence
Commutable distance to EMR Darlaston and City of Wolverhampton College
Grade 4 or above maths and English preferred
Training:Level 3 Engineering Maintenance Technician Apprenticeship (Dual Discipline). Training Outcome:Excellent opportunities for progression once the apprenticeship is complete, via higher level apprenticeships or into different roles within the Engineering Maintenance team.Employer Description:EMR GROUP LTD is a global leader in sustainable materials with physical operations in the UK, USA, Germany and the Netherlands. Our core business is the recycling of metal and plastics from a range of public, commercial and industrial waste streams. Our recycling activities generate around 10 million tonnes of sustainable materials every year, saving over 10 million tonnes of CO2. Our mission is to have great people serving our customers with dependable recycling solutions. EMR is still privately owned, with family values at its core. It’s a place where we care about our people, our customers, our workplace and our communities. We offer diverse and exciting career opportunities where individuals can make a difference and are recognised and rewarded for their hard work.Working Hours :Monday - Friday, 7.00am - 4.30pm.Skills: Communication skills,IT skills,Attention to detail,Organisation skills,Problem solving skills,Analytical skills,Logical,Team working,Initiative....Read more...
Apprentice Work Responsibilities:
Assist in production processes: Support the manufacturing of infrared heaters using both manual and CNC machinery
Interpret engineering drawings:
Read and understand technical drawings, specifications, and CAD models to ensure accurate production
Use CAD and technical software: Produce designs, modify layouts, and support engineers in creating manufacturing solutions
Quality control and testing: Inspect components, test equipment, record results, and report any issues to ensure high standards
Support process improvement: Identify inefficiencies, suggest improvements, and assist in implementing better workflows
Technical reporting and documentation:
Write reports, maintain records, and document test results or engineering changes
Collaborate with teams: Work alongside engineers, technicians, and other departments to coordinate tasks and projects
Health, safety, and compliance: Follow all safety protocols and environmental regulations in the workplace
Learn from mentors: Receive guidance and support from experienced engineers, supervisors, and tutors throughout your apprenticeship
Training:
4-days per week on-the-job at Tansun
1-day per week off-the-job training at Sandwell College 404 High Street, West Bromwich B70 9LB
Level 3 Engineering and manufacturing support technician apprenticeship
Training Outcome:
For the right candidate to progress as a full-time employee
Employer Description:Tansun is the UK’s leading infrared heater manufacturer. With over 40 years of experience in the heating industry, our vast range of infrared heaters are manufactured to the highest quality, providing optimum heat performance all year round. Each infrared heater range is designed with unique features, specific to the heating sectors and applications they target.
Fully IP rated weatherproof heaters specially created for outdoor commercial heating, premium infrared heaters with glare reducing gold reflectors for ultra low glare heating, even portable heaters with anti-tilt safety devices for emergency mobile heating. We offer the largest range of domestic, commercial and industrial infrared heaters in the world today!Working Hours :Hours to be discussed at interview.Skills: Communication skills,IT skills,Attention to detail,Organisation skills,Customer care skills,Problem solving skills,Presentation skills,Administrative skills,Number skills,Analytical skills,Logical,Team working,Creative,Initiative,Non judgemental,Patience,Physical fitness....Read more...
Assisting those personnel at Inspection Engineer level and above in performing NDT on a wide range of Marine and land-based assets
Corrosion mapping utilising complex ultrasonic and electromagnetic methods
Modelling of inspection data
Work as part of a project team to produce detailed, technical inspection reports
Assisting in failure investigations
Assist in equipment functionality checks & calibrations
Perform any assigned tasks with due diligence regarding Brookes Bell’s integrated quality management systems
Training:Non-destructive Technologies Technician Level 3.
The apprenticeship programme is designed to gain skills and technical expertise to become a certified NDT Technician in three NDT Methods. This includes health and safety training, 1-to-1 mentoring, seminars, practical work experience sessions, and on-the-job training.
The candidates will keep records of their learning and experience throughout the programme and create an improvement plan.
On successful completion of the apprenticeship scheme, further PCN qualifications may be gained. Training Outcome:Upon completion of the apprenticeship and satisfactory performance in the role the individual will be promoted to be an Inspection Engineer in the following January or July.
Career Progression in the years following is determined by meeting relevant targets. Promotion applications are accepted twice a year in July and January.Employer Description:Brookes Bell provides multidisciplinary technical and scientific consultancy to the maritime and energy industries.
The Lab provides services in forensic engineering analysis, investigation and testing including NDT.
The NDT department specialises in advanced electromagnetic testing and ultrasonic testing, working for clients such as the Royal Navy, MOD and a wide range of commercial entities.Working Hours :Monday to Friday, 9.00am - 5.30pm.
1-hour lunch break.Skills: Communication skills,IT skills,Attention to detail,Problem solving skills,Team working,Initiative,Writing Skills,CAD & 3D modelling Software....Read more...
Develop a technical understanding of electrical and/or mechanical building services systems installed in commercial and complex buildings
Read, understand and work with technical specifications, drawings and schedules
Work with engineers and BIM teams to coordinate designs and resolve technical queries
Raise and manage Requests for Information (RFIs) and understand the importance of clear audit trail
Prepare and deliver Risk Assessments and Method Statements (RAMS) to support safe installation activities
Support the procurement process, including requesting quotations, assessing technical compliance and placing orders
Attend project meetings with clients, designers, contractors and internal teams
Prepare information for progress reports, programme updates and cost control
Work with your project team to monitor installation progress against the programme and identify risks, solutions and opportunities
Learn how to manage change, including the importance of early warning notices and their impact on time and cost
Support commissioning activities and ensure systems are delivered and handed over in line with quality standards and completed drawings
As you gain experience, manage small sections of a project and take responsibility for meeting agreed targets and deadlines
Training:
You will train at one of the top performing colleges or training providers in the country
Level 4 Building Services Engineering Technician Apprenticeship
Block release at college
You will regularly attend in house training and development as part of the programme
Training Outcome:Once qualified there is the potential of a permanent position within the company. If your successful gain a permanent position, there are many opportunities to advance your career. Employer Description:NG Bailey is the UK's leading independent engineering and services business. Our vision is ‘to be the best – creating exceptional environments for present and future generations’. We work across a variety of sectors within the building and infrastructure industry, and our innovative, responsible and forward-thinking approach allows us to work on fantastic ground-breaking projects. Our company has two divisions, Engineering and Services, which together we bring buildings and infrastructure to life.Working Hours :Monday to Friday, working hours are between 07:00 and 17:30, shift dependent on the project.Skills: Communication skills,Attention to detail,Organisation skills,Problem solving skills,Number skills,Analytical skills,Logical,Team working,Initiative,Excellent timekeeping,Are keen to learn,Safety Conscious....Read more...
Engineering & CAMduct
Assist in creating, editing, and maintaining CAMduct job files and manufacturing data.
Help prepare sheet metal, ductwork, and fabricated parts for CNC cutting using CAMduct.
Interpret technical drawings and specifications to ensure manufacturing accuracy.
Support engineers in maintaining and improving CAMduct libraries, templates, and machine setup data.
Monitor production schedules and job progress to ensure timely delivery to the workshop.
Work with production staff to resolve any programming or material issues.
Purchasing & Sage 300
Use Sage 300 to raise and manage purchase orders for materials, fittings, and consumables.
Obtain and record supplier quotations, lead times, and pricing information.
Maintain up-to-date supplier and stock information within Sage 300.
Assist in tracking deliveries, checking goods received, and liaising with suppliers to resolve queries.
Support the purchasing team with cost control and order documentation.
Ensure all procurement records are filed accurately and kept up to date.
Office Administration
Provide general administrative support to the engineering, purchasing, and operations teams.
Answer phones, handle email correspondence, and direct queries to the appropriate departments.
Prepare and maintain spreadsheets, reports, and job files.
Assist in document control, including scanning, filing, and version tracking.
Help organise meetings, take minutes, and support communication across departments.
Manage office supplies and assist with general office upkeep.
Support data entry, record keeping, and other administrative tasks as required.
Attend on-the-job and college-based training as part of your apprenticeship program.
Follow all company health, safety, and quality procedures.
Work collaboratively with colleagues to achieve production and purchasing goals.
Demonstrate initiative, attention to detail, and a commitment to professional growth.
Training Outcome:On successful completion of the apprenticeship, you may progress into roles such as:
CAM duct Technician / Engineer Purchasing or Procurement Coordinator
Project or Operations Engineer
Production Support Specialist
Production Management
Employer Description:C. Caswell Engineering Services Limited ? known simply as ?Caswell? throughout the industry ? is a Ventilation and Air-Conditioning manufacturing and contracting business based in Haslingden.Working Hours :Monday to Thursday, 8.15am to 4.30pm.
Friday, 8.15am to 3.15pm.Skills: Communication skills,IT skills,Attention to detail,Organisation skills,Problem solving skills,Administrative skills,Analytical skills,Logical,Team working,Initiative....Read more...
Role and responsibilities:
To generate CNC programs using Siemens NX to run on AESSEAL machine tools
Verify CAM generated programs using Vericut Software
Work on tool, method and production standards
Regular liaison with workshops
Regular liaison with Design
Review and save proven programs onto Teamcenter
Collaborate with workshop personnel/managers on new machine methods
Work shifts (to be discussed/agreed)
This list is not exhaustive. The job holder is required to carry out reasonable tasks within their level of skill and ability
Training:You will study on a Level 3 Machining Technician Standard. On completion of this, you will gain a qualification in Engineering at Advanced Level 3.
During the first year of the apprenticeship, your learning will take place at the University of Sheffield’s AMRC Training Centre based at Catcliffe, Rotherham, for an initial block of study on a full-time basis. After this, you will attend the Training Centre for one day a week for knowledge study.Training Outcome:Completion of the University of Sheffield’s AMRC Training Centre apprenticeships are nationally recognised qualifications which are acknowledged and respected by employers across the world. These can open the door to many more opportunities, such as Engineering Management and Project Engineering positions across a range of sectors worldwide.Employer Description:At AESSEAL® we design and manufacture sealing solutions for a sustainable future.
We combine both our own success with environmental protection and being a good corporate citizen.
Through our investment in innovative new sealing solutions we enable our customers in a wide range of industries to meet the complex needs of society both now and in the future.
We believe in operating in an ethical and sustainable manner, providing sealing solutions to our customers that improve reliability and help reduce energy and water consumption. Our world class manufacturing facilities use the latest in machine tool technology and our systems and processes enable us to be the worlds largest homogeneous mechanical seal manufacturer.
By investing in pioneering technology, we simplify the whole ordering process and respond quickly to customers’ needs – whatever, wherever. We aim to exceed expectation consistently: in delivery, quality, reliability and service. We’re challenging industry standards, challenging our competitors, challenging thinking – and challenging to become world market leader.Working Hours :Monday - Friday. Your start and finish times, including your shift pattern will be determined by the employing company.Skills: Communication skills,Attention to detail,Organisation skills,Analytical skills,Logical,Team working,Initiative....Read more...
Discover the fascinating world of maintaining cutting-edge machinery in our apprentice programme – the next chapter in your career! Work alongside a highly skilled team, learning about Princes products and how they are manufactured.
At Princes, we believe in attracting and developing talent from our business to accelerate your learning and identify your potential. Join our Engineering apprenticeship programme, learn on the job, and work with expert Technicians at our manufacturing sites!
What to expect:
4-year apprenticeship with potential for permanent career development
College release and work-based assignments with experienced technicians
Exceptional training and development throughout the apprenticeship
Training:Year 1 of the Level 3 Mechatronics Engineering Technician Apprenticeship Standard, the learner will attend four days a week within IPS Rochester workshop completing practical skills and one day a week studying the Technical Certificate. In Year 2, the Apprentice moves to day-release and will attend IPS one day a week to continue the Technical Certificate. Starting in Year 2 and continuing until completion in Year 4. The Apprentice will continue to receive regular training contact with IPS all throughout the programme.Training Outcome:Upon successful completion of the apprenticeship, there may be the opportunity for a permanent position.Employer Description:For generations, families have reached for Princes for something tasty for breakfast, lunch or dinner.
From Tuna, to peach slices, to corned beef. We’ve lovingly developed a wide range of tasty, high quality food and drink products to help you and your family eat healthier and fit a good diet around your busy lives.
For almost 150 years, our commitment to providing high quality, delicious, healthy and affordable food and drink has never changed.Take a peek at our collection of quick and simple recipes, designed with your whole family in mind.Working Hours :Rotating week:
6am - 2pm.
2pm - 10pm.
5 days a week.Skills: Communication skills,Attention to detail,Team working,Initiative....Read more...
Multi-disciplined engineer for production of medium to high volume complex components for (predominantly) the Aerospace industry
Set & Operate bar fed CNC Sliding Head twin spindle machine tools
Program & Set multi-sensor CNC inspection equipment
CNC program development using CAD/CAM systems
In process inspections
Offset adjustment
Tip changing
Tool setting
Machine set-up
CNC program editing for cutting and inspection equipment
Inspection equipment programming
CNC programming (basic)
CAD/CAM programming
Training:
Level 3 Machining Technician Apprenticeship Standard:
This programme is delivered via a day release delivery model which means that one day per week, your attendance is required at our Engineering campus, NG17
This attendance is required during term time only
You will work with expert assessors to develop new knowledge, skills and behaviours within the profession
You will experience a blended learning model
You will gather learning evidence, journals and off-the-job records using your e-portfolio
At the end of the planned learning period, it will be agreed that you are ready to enter 'Gateway' and for your End Point Assessment to be arranged
Training Outcome:
Potential full time employment upon completion of apprenticeship
Employer Description:Trust Precision Engineering is an AS9100 for Aerospace accredited machined parts sub contract service provider specialising exclusively in sliding head machining. The proven cost savings of 1 hit machining for both simple and complex components is fundamental to our philosophy. Trust Precision will provide the highest quality and service for your machined component requirements. With our uncompromising approach to the business you will get the quality and value you deserve.Working Hours :Monday - Friday, 08.00 - 16.00.Skills: Attention to detail,Interpersonal skills....Read more...
Person required to train on our latest CNC Milling and Turning machines to include fixed head and sliding head
All aspects of training will be given to right candidate and there is a possibility of off-site training at the manufactures training HQ
College 1 day per week in Chelmsford General duties:
Leaning all aspects of CNC Milling and turning
Setting up
Programming to include CAD CAM and operation
Machine maintenance + health and safety
Training:
Engineering Level 3 Machining Technician
Training Outcome:
Potential full-time role after apprenticeship
Employer Description:Southfields has been trading since 1979 and have over 35 years experience, our success due to trading across a diverse market, catering to an extensive range to our customer’s requirements, all of which are of the highest standard of expertise. Southfields capabilities are limitless, and quality is always at the forefront of our business strategy.
Our modern subcontract CNC turning and milling facility is situated in Essex and has been fully equipped to enable us to offer our customers the most reliable and efficient precision CNC machining service possible.
The bespoke nature of our business allows us to cater for the needs of each customer individually.
In what are often complex time critical supply chains, we understand the need to offer quick turnaround to our customers. Our lead times are flexible depending on batch size. We offer a fast track CNC turning and milling service if your requirement is urgent. We will work with you to deliver the most efficient service possible.
In addition, our engineers use their skill and experience in CNC precision engineering to advise customers on the design of their components; where opportunities exist to achieve greater cost efficiencies through design improvements, our engineers will discuss these with customers to ensure they achieve maximum efficiencies.Working Hours :Monday- Thursday, 8.00am - 4.30pm.
Friday, 8.00am - 3.00pm.Skills: Good Communicator....Read more...
Get stuck into toolbox talks and safety briefings
Work on mail sorting machines, conveyor systems, and robotics
Learn how to maintain, diagnose and fix automated systems
Take part in cool projects– from design to digital design and 3D modelling
Team up with experienced engineers and share ideas
End the day with a quick review to plan for tomorrow
Training:At college, you will learn:
Electrical and mechanical engineering basics
Health and safety statutory regulations and rules
How to use PLCs (Programmable Logic Controllers)
How to locate and resolve complex mechanical/ electrical faults
Training Outcome:Where could your career go next?
After your apprenticeship, you could progress into roles like:
Maintenance Technician
Engineering Team Leader
Specialist Engineer
There may be further opportunities to enhance your academic studies by undertaking HNC/HND or degree-level study
Employer Description:At Royal Mail we value our people and we want our people to be proud to work for our businesses. We have the assets, the infrastructure and the scale that others don’t, yet we are a big part of the communities we operate in, making billions of precious deliveries each year. We are responsible for the largest B2B customer database in the UK and are one of the largest employers in the UK, providing one in every 194 jobs. Royal Mail is a forward thinking, innovative organisation, that is also committed to reducing emissions and improving air quality in our communities. This includes investing in technologies such as electric vehicles, drones, alternative fuel trucks and energy improvements to our estate. For more information on Royal Mail Group and our values please click here: https://www.internationaldistributionsservices.com/en/about-us/Working Hours :Shift timings would be confirmed closer to start date.Skills: Communication skills,IT skills,Attention to detail,Problem solving skills,Team working....Read more...
You will undertake a programme of training to gain full working knowledge in all aspects of Conventional and Addressable Fire Alarms as well as suppression systems, including learning to diagnose faults, program systems, install equipment and cables
You will assist and support with planned and reactive maintenance
You will use different systems and processes to complete various sizes of systems and protection, ensuring that customers' buildings, plants and equipment perform to the required standard to facilitate production targets regarding safety, quality, delivery and cost within a high-value manufacturing environment
Through working on a broad range of activities, including installation, testing, fault-finding and the ongoing planned maintenance of complex systems of various sizes, you will develop a blend of skills, knowledge and occupational behaviours across the electrical, electronic, and mechanical system disciplines
Training:
Enrol in a level 3 Maintenance and operations engineering technician course delivered by Train'd Up alongside fellow Johnson Controls apprentices
Engage in day release training and receive on-the-job guidance from experienced mentors and engineers
Training Outcome:
Upon completion of this apprenticeship, there are many internal opportunities within the company
Many of our previous apprentices have become lead engineers and take control of their own team and projects
Employer Description:Johnson Controls is a global leader in technology and industry, serving customers in over 150 countries. Our mission is to create intelligent buildings, efficient energy solutions, and integrated infrastructure. We welcome individuals with a passion for engineering to join us in shaping a better tomorrow through our diverse range of projects and opportunities.Working Hours :Monday to Friday. Inclusive of a lunch break directed by your manager. Hours may vary depending on customer and team requirements.Skills: Communication skills,IT skills,Attention to detail,Organisation skills,Customer care skills,Logical,Team working,Initiative....Read more...
