PLC Software Engineer required to join a growing team delivering exceptional water and wastewater client services and innovative solutions.
Key skills
PLC Programming commercial experience ideally within water or wastewater industry.
Electrical control panel knowledge.
Electrical or Electronic Engineering qualifications and experience in system software engineering.
Automation and Process Control Equipment understanding.
Driving licence.
Role
PLC Software Engineering.
Design, develop, program and testing PLC systems.
Specify, design and build programs.....Read more...
PLC Software Engineer required to join a growing team delivering exceptional water and wastewater client services and innovative solutions.
Key skills
PLC Programming commercial experience ideally within water or wastewater industry.
Electrical control panel knowledge.
Electrical or Electronic Engineering qualifications and experience in system software engineering.
Automation and Process Control Equipment understanding.
Driving licence.
Role
PLC Software Engineering.
Design, develop, program and testing PLC systems.
Specify, design and build programs.....Read more...
PLC Software Engineer required to join a growing team delivering exceptional water and wastewater client services and innovative solutions.
Key skills
PLC Programming commercial experience ideally within water or wastewater industry.
Electrical control panel knowledge.
Electrical or Electronic Engineering qualifications and experience in system software engineering.
Automation and Process Control Equipment understanding.
Driving licence.
Role
PLC Software Engineering.
Design, develop, program and testing PLC systems.
Specify, design and build programs.....Read more...
PLC Software Engineer required to join a growing team delivering exceptional water and wastewater client services and innovative solutions.
Key skills
PLC Programming commercial experience ideally within water or wastewater industry.
Electrical control panel knowledge.
Electrical or Electronic Engineering qualifications and experience in system software engineering.
Automation and Process Control Equipment understanding.
Driving licence.
Role
PLC Software Engineering.
Design, develop, program and testing PLC systems.
Specify, design and build programs.....Read more...
Service ManagerEssex
£70,000 - £80,000 Basic + Bonus + Company car + Technical Progression + Company Vehicle + Door to door + Increasing Holiday + Growing Company + International Travel
Elevate your career now by stepping into a hands-on Service Manager role with a global company where you’ll lead a team of engineers, drive operational performance, and play a key part in the continued growth of a thriving engineering business. With clear technical progression opportunities, you’ll have the chance to shape the service department, implement improvements, and further develop your leadership career.
This company designs and manufactures vehicle wash systems for commercial and industrial settings. Due to continued expansion and increasing demand, they are looking for an experienced Service Manager to oversee operations across the Essex region and help drive their ongoing success. Join now and take the opportunity to thrive in a dynamic, forward-thinking environment where you’ll make a real impact.
The Service Manager Role Will Include: * Managing Field Service Engineers Across The UK *Overseeing Service, Repairs, PPMs And Breakdowns Of Vehicle Wash Systems * Coordinating Call-Out Rotas And Ensuring SLA Performance *Happy To Commute & Travel abroad when necessaryThe Successful Service Manager Will Have: *A Technical Background In Mechanical / Electrical Engineering (Preferred) * Previous Experience In A Service Manager / Head Of Service (or similar) role * Strong Leadership And Organisational Skills* Ability To Commute To The Office In Essex
Please Apply Or Call Rebecka On 07458163046 For Immediate Consideration.
Keywords:Service Manager, Head of Service, Engineering Manager, Head of Engineering, Field Service Manager, Regional Service Manager, National Service Manager, Operations Manager, Service Operations Manager, Aftermarket Manager, Maintenance Manager, Technical Service Manager, Engineering Supervisor, Service Supervisor, London, Greater London, Central London, North London, South London, East London, West London, Enfield, Barnet, Finchley, Edgware, Harrow, Wembley, Islington, Camden, Hampstead, Wood Green, Tottenham, Ealing, Acton, Chiswick, Hounslow, Uxbridge, Hayes, Southall, Brentford, Hillingdon, Richmond, Twickenham, Croydon, Bromley, Sutton, Kingston upon Thames, Wandsworth, Lambeth, Lewisham, Greenwich, Ilford, Romford, Barking, Dagenham, Stratford, Walthamstow, Redbridge, Havering, Bexley, Dartford, Watford, St Albans, Hemel Hempstead, Slough, Windsor, Maidenhead, Epsom, Reigate, Guildford.
This vacancy is being advertised by Future Engineering Recruitment Ltd. The services of Future Engineering Recruitment Ltd are that of an Employment Agency.
Please visit our website at Future Engineering Recruitment to view other positions we are currently handling.
Future Engineering Recruitment Ltd can only accept applications from candidates who have a valid legal permit or right to work in the United Kingdom. Potential candidates who do not have this right or permit, or are pending an application to obtain this right or permit should not apply as your details will not be processed. We will endeavour to respond to all applicants; however due to the sheer volume of response, we can only guarantee that candidates who have been shortlisted will be contacted.....Read more...
You will join our Roads & Highways department.
As our new Technician Apprentice you will be part of a fast growing, dynamic team in our Southampton office. You will be part of an exciting team of experts, who respect each other and work towards a common goal. You will be provided with on-the-job training and mentoring from our team of experienced, industry-leading professionals.
Your key tasks and responsibilities will be:
Working on Small, Medium and Large projects, producing 3d models, visualisations, drawings and schedules that describe how to build our award-winning designs under the leadership of the discipline manager
You will learn to use an extensive suite of cutting-edge CAD applications and be challenged to improve the use of them
You will be working alongside the rest of the Transport team, and teams of all disciplines nationally and internationally across the Ramboll Group to deliver our projects
Promote the Ramboll brand, its core values and our strategy as The Partner for Sustainable Change
Apply and promote policies relating to health and safety, quality and the Environment
Training:Job Description:
Ramboll invite you to apply for a Technician Apprenticeship in our Transport Infrastructure team, assisting the delivery of Infrastructure design services across a wide range of projects. You will be provided full support to achieve a Level 3 qualification, typically on a day release basis, and create a solid foundation for a successful and satisfying career.
The Apprenticeship Programme Duration, Cost and Qualifications:
The duration of this apprenticeship is typically 27 months (depending on experience). The cost of the Apprenticeship is paid by Ramboll through the Apprenticeship Levy.
Qualifications to be awarded:
Level 3 Civil Engineering Technician Apprenticeship
BTEC Level 3 National Diploma in Construction and the Built Environment
Progression Opportunities:
On completion of the Apprenticeship you will have satisfied the requirements for registration as an Engineering Technician by the Institution of Civil Engineers in accordance with the requirements of the Engineering Council as the registration body. Potential onward career progression within Civil Engineering could be to continue work as a Civil Engineering Technician, study a Senior Technician Apprenticeship or complete a Degree (apprenticeship options are available) in Civil Engineering.
Apprenticeship Course Delivery:
The apprenticeship will involve working for Ramboll 4 days a week and a day release per week in person at college or remotely at South Hampshire College Group. You will be required to complete an End Point Assessment where you will need to demonstrate that during the apprenticeship you have learnt the required knowledge, skills and behaviours.Training Outcome:Progression Opportunities
On completion of the Apprenticeship you will have satisfied the requirements for registration as an Engineering Technician by the Institution of Civil Engineers in accordance with the requirements of the Engineering Council as the registration body. Potential onward career progression within Civil Engineering could be to continue work as a Civil Engineering Technician, study a Senior Technician Apprenticeship or complete a Degree (apprenticeship options are available) in Civil Engineering.Employer Description:Ramboll is ranked a Top 10 consultant in the UK and has 1,500 bright minds working across 17 offices to apply their passion to deliver innovative solutions across Buildings, Transport, Environment & Health and Energy. We love seeing our talents develop and succeed and you will have opportunities to work on challenging and inspiring projects within an environment that is friendly, open and supportive.Working Hours :4 days a week at Ramboll.
1 day remote learning or at a local college.
Shifts to be confirmed.Skills: Communication skills,IT skills,Attention to detail,Organisation skills,Problem solving skills,Analytical skills,Team working....Read more...
What you’ll be doing as a Civil Engineering Apprentice:
Assist in planning, designing, and managing civil engineering projects across Thames Water’s network
Prepare and update engineering diagrams, documents, and specifications using tools like CAD
Collect and analyse technical data to develop practical engineering solutions
Ensure work meets health and safety standards, environmental regulations, and sustainability goals
Support quality, budget, and schedule management using project systems
Communicate and coordinate effectively with project teams, stakeholders, and customers
Build skills in line with professional codes and industry standards
A list of suitable qualifications is listed below, you do not need to hold all further education qualifications but at least one of them.Training:
Knowledge, skills and behaviours as set out in the Civil Engineering Level 6 standard
Qualification achieved: BEng (Hons) Civil Engineering
You’ll study with LSBU, a leading UK Civil Engineering provider, with one day per week of onsite training in central London and a 3-day field trip during your first year.
Training Outcome:Permanent contract with a 66 month structured programme.Employer Description:Who are we? We’re the UK’s largest water and wastewater company, with more than 16 million customers relying on us every day to supply water for their taps and toilets. We want to build a better future for all, helping our customers, communities, people, and the planet to thrive. It’s a big job and we’ve got a long way to go, so we need help from passionate and skilled people, committed to making a difference and getting us to where we want to be in the years and decades to comeWorking Hours :Hours: 36-hour week over four working days plus one training day Mon-FriSkills: Communication skills,IT skills,Attention to detail,Organisation skills,Customer care skills,Problem solving skills,Presentation skills,Administrative skills,Number skills,Analytical skills,Logical,Team working,Creative,Initiative....Read more...
The BMW Group offers an enhanced Level 6-degree apprenticeship. This degree in Electronic Engineering (BEng (Hons)), provided by Birmingham City University and fully funded by the business, will take place alongside you developing your specialist technical knowledge.
The training that you receive during your apprenticeship involves studying modern, state-of-the-art automotive production technology as well as the latest innovations in manufacturing techniques.
The BMW Group offers an enhanced level 6-degree apprenticeship commencing end of August 2025. The four-year programme is designed to enable you to experience different aspects of engineering and production technology, including robotics, controls systems, machining, fluid power, electronics, welding, and many more.
Alongside the practical engineering skills that are gained, the program will also focus on your personal and professional development where you will have exposure to a number of business techniques such as Agile, Lean Manufacturing and Problem Solving.
The first year of the program is exclusively in a learning environment where in addition to starting the academic requirements of your program you will undertake practical training to qualify you with Employers Units of Competence
Your training will cover a wide range of engineering disciplines such as milling and turning, hand skills, electrical and electronic circuits, control systems, fluid power, programmable logic controllers, welding and more
In the second and third year you will continue with the academic requirements of the programme alongside on-the-job training. Your on-the-job training will comprise of placements in a number of different areas of the business, with particular focus on developing, creating and quality checking our products and systems
Whilst training onsite, you will rotate around the business with placements in all areas of automotive manufacturing and may also involve placements at other BMW UK sites
In your fourth year your on-the-job training will continue and will become more targeted to your final job role and where the job requires it you will start working a shift pattern to help better integrate you with your team
Finally, by the end of the apprenticeship, you will have also finished your degree
Training:
Foundation Practical Engineering (Year 1)
Foundation Degree in Manufacturing Engineering - Year 2
Foundation Degree in Manufacturing Engineering - Year 3
Top up to Manufacturing Engineering Degree (BEng) - Year 4 (BCU)
Training Outcome:Whilst developing specialist, on-the-job knowledge, the apprentice will also undertake fully funded study toward the attainment of a BEng (Hons) in Manufacturing Engineering.
You will then be gaining further practical experience, by joining the control engineering or control planning team as a potential permanent role. These teams are responsible for ensuring that the technology within our business is state of the art and maintains its optimal efficiencies.Employer Description:BMW Group Plant Hams Hall is a modern, state-of-the-art engine manufacturing facility, located just outside Birmingham, UK. Producing the latest generation of three and four cylinder petrol engines as well as V8 and V12 engines, the plant has recently celebrated 20 years of successful production. Operating seven days a week with more than one engine rolling off the line per minute, the plant plays a key role in BMW Group’s global production network, supplying engines for BMW and MINI, including some of the latest plug-in hybrid vehicles.Working Hours :Start and finish times will vary to meet the needs of your work-based placements and college hours. Exact working days and hours TBCSkills: Communication skills,Attention to detail,Customer care skills,Number skills,Logical,Team working,Initiative,Physical fitness....Read more...
M&E Project Manager
Midlands (Tullamore Base) – Multi-Site
€60,000 – €75,000 + Company Vehicle (Personal Use) + Phone + Laptop + Clear Progression + Water Sector Stability + Leadership Exposure + Pension + Holidays + Package
Secure your future as an M&E Project Manager within the water and wastewater sector. Join a well-established engineering contractor delivering essential municipal and industrial water projects across Ireland. This is a senior-level position offering long-term stability, strong earning potential, and clear progression into senior leadership roles.
Work on technically engaging pumping and process-driven projects in a secure, recession-resistant industry. Take full ownership of projects from handover to completion while being supported by an experienced multidisciplinary team.
With a strong and growing pipeline of work, the company is now seeking an experienced M&E Project Manager to oversee projects primarily across the Midlands, with some coverage towards Galway.
Your Role As An M&E Project Manager Will Include:
* Full responsibility for M&E project delivery from handover to completion
* Managing water & wastewater projects across multiple sites
* Overseeing pumping systems including pumps, pipes and valves
* Managing budgets, schedules, procurement and financial control
As A Successful M&E Project Manager You Will Have:
* Experience as a Project Manager
* Water / Wastewater industry experience
* Experience within heavy industrial or process-driven environments
* Strong understanding of pumping systems, liquid handling and process plant
* Electrical knowledge including power distribution and motor control
* Degree or trade qualification with relevant experience
* Full driving licence and flexibility to travel
Please get in contact with Maia on 07537154330 for immediate consideration.
Keywords: M&E Project Manager, Electrical Project Manager, Mechanical Project Manager, Water, Wastewater, Pumping Systems, Motor Control, Process Engineering, Midlands, Tullamore,Project Engineer, Mechanical Project Support, Design Engineer, Engineering Design, CAD Design, Technical Support Engineer, Graduate Mechanical Engineer, Junior Project Engineer, Engineering Consultancy, Industrial Design, Process Engineering Support, Engineering Documentation, Technical Drawings, Bill of Quantities, Equipment Specification, Engineering Calculations, Site Support, Engineering Coordination, Design Development, Infrastructure Engineering
This vacancy is being advertised by a recruitment agency acting as an Employment Agency.
Applicants must have a valid legal right to work in Ireland.
We will endeavour to respond to all applicants; however, due to the volume of response, only shortlisted candidates will be contacted.....Read more...
Are you an experienced technical trainer who enjoys turning complex engineering systems into clear, practical learning experiences?
This is an excellent opportunity to join a well-established engineering organisation in a role that plays a critical part in customer satisfaction, product understanding, and long-term equipment performance. The Training Manager will lead the design and delivery of structured operator and engineering training programmes, working closely with customers and internal technical teams.
You will take full ownership of customer-facing training activity, ensuring training is delivered to a consistently high standard across on-site and in-house environments. This role combines hands-on delivery with content development, programme evaluation, and close collaboration with service, sales, and engineering teams.
Key Responsibilities of a Training Manager:
- Design, implement, promote, and maintain structured operator and engineering training programmes
- Deliver engaging on-site and in-house training sessions for customers
- Develop and maintain training materials including manuals, presentations, and visual content
- Ensure training content remains accurate, consistent, and aligned with technical standards
- Monitor and evaluate training effectiveness using feedback and performance metrics
- Act as the primary point of contact for all training-related queries
- Coordinate training schedules with internal departments and external partners
- Maintain accurate records and prepare training activity reports for senior management
What you Need:
- Proven experience in a technical training or training management role
- Background in engineering, manufacturing, food processing, or machinery environments
- Strong capability in developing structured technical training content
- Confident communicator with excellent presentation and stakeholder engagement skills
- Well organised, self-motivated, and comfortable working independently
- Proficient in Microsoft Office and technical documentation tools
- Full UK driving licence and willingness to travel to customer sites
Whats on Offer:
- Permanent, full-time position (Monday to Friday)
- 25 days holiday plus bank holidays
- Company pension scheme
- Private medical and critical illness cover
- Modern offices with free on-site parking
To apply or for further information, please contact:
Ian Broadhurst
ian.broadhurst@holtengineering.co.uk
07734 406996....Read more...
AA Euro Group are currently seeking a Senior Structural Engineer around the Coventry/Solihull area. You will join a delivery team working on the major civil engineering works for HS2, with specific responsibility for structural engineering design and delivery of pumping stations supporting ground and drainage infrastructure. This role is pivotal in ensuring high-quality structural solutions across multiple assets on one of the UK’s largest infrastructure programmes.This is a 6-month contract where you will be employed directly by the contractor.Key Responsibilities
Lead structural engineering design for multiple pumping stations and associated infrastructure elements on HS2.Produce and review design calculations and structural drawings in line with UK standardsCoordinate design activities across multi-disciplinary teams (civil, M&E, geotechnical, hydraulic).Perform site inspections and provide structural support during construction and commissioning phases.Review contractor submittals and issue technical clarifications and Non-Conformance reports where required.Manage and mentor junior engineers and technicians.Prepare technical reports, RAMS, design justifications, and value engineering assessments.Maintain compliance with project design standards, safety, and quality procedures.Attend design reviews, client meetings, and workshops as required.
Required Qualifications
Bachelor’s degree in Structural/Civil EngineeringDemonstrable experience (typically 8+ years) in structural engineering design within water, infrastructure or large civil projects.Proficient with structural analysis tools (e.g., Autodesk Robot / STAAD / IDEA Statica / Tekla) and CAD environments (AutoCAD / MicroStation / Revit).Comprehensive UK design code knowledge (Eurocodes / BS).
Core Skills & Competencies
Strong structural analysis and problem-solving capabilities.Excellent communication skills for reporting, coordination, and stakeholder engagement.Ability to lead technical teams and mentor engineers.Robust planning, organisational and time-management skills.Commitment to safety, quality, and collaborative working.
INDWC....Read more...
We are searching for a Principal Fire Engineer for an award-winning and fast-growing multidisciplinary building and construction consultancy that has offices across the whole of the UK.
Our client is a successful consultancy offering Architectural, Building Surveying, Building Services Engineering, Civil Engineering, Fire Engineering, Project Management, Quantity Surveying, Structural Engineering and Town Planning services to their clients.
Their success is built on their constant pursuit of excellence and through the hiring of a highly motivated, well trained and professionally qualified team they ensure the best service possible for their customers.
We are looking to speak with candidates who are ideally based in the Manchester or Great Manchester area - we will also consider applications from candidates based near to Barnsley, Blackburn, Bolton, Bradford, Chester, Crewe, Halifax, Leeds, Liverpool, Preston, Sheffield, Stoke-on-Trent or Warrington or candidates who are happy to relocate to the Manchester area.
Please note, you will need to be able to attend meetings at the central office which is located in Manchester. This role can be offered as hybrid or remote, but you will need to commute to the office and various client sites as and when required.
We are searching for an experienced Principal Fire Engineer who wants to be more than just a Technical Lead. As the Fire Engineering team grows the consultancy is diversifying its services ensuring that they remain at the forefront of Fire Engineering.
In this role you will be a vital part of their evolution, contributing your expertise to the Fire Engineering strategy and helping the business redefine the services they offer to their clients.
As a Principal Fire Engineer, you will oversee the entire fire engineering service ensuring that all components, from structural materials to evacuation plans, work as a unified, life-saving system.
You will ensure buildings are designed to minimise fire risks, through contributing to the development of fire strategy reports, calculations and fire risk assessments. You will work closely with a range of professional in the construction industry, collaborating with multidisciplinary teams.
Main Duties and Responsibilities
Manage multiple, complex Fire Engineering projects from initial concept/bid to completion, ensuring delivery on time and within budget.
Lead on conducting formal fire risk assessments, hazard analyses, and determine the necessary protective measures to mitigate identified risks.
Design, calculate, and specify active fire protection systems (sprinklers, alarms, smoke control) and passive fire protection measures (compartmentation, fire-rated materials) using relevant codes and standards.
Prepare comprehensive fire strategy reports for buildings, outlining all fire safety measures, from structural design to active systems and human evacuation.
Strong mathematical and physics skills for hydraulic calculations, heat transfer analysis, and effective use of CAD and BIM software (Revit, AutoCAD) for design documentation.
Ensuring compliance with health and safety regulations and best practices.
Great written, oral and articulate communication skills, to present complex, performance-based fire strategies to clients, architects, regulatory authorities, negotiating design solutions.
Capability to conduct high-level technical reviews, quality assurance, and peer review of fire strategy reports and designs produced by other engineers.
About you:
You will have a degree in Project Management / Fire Engineering or a relevant subject.
You will have a professional membership with APM or RICS.
You require previous experience of leading a team.
You will have proven experience in client-facing roles or managing external client relationships.
Benefits:
Join a successful and dynamic consultancy with excellent progression opportunities.
Regular and committed training and CPD opportunities.
Up to 27 days holiday (increasing with length of service) plus bank holidays.
Regular sports & social events - BBQ’s, boat trips, bowling nights!
Private Healthcare.
Excellent enhanced pension scheme.
Cycle to Work Scheme.
Access to 24/7 counselling through our employee assistance helpline
And more!
Please note, to be considered for this role you MUST have the Right to Work in the UK long-term without requiring Company Sponsorship.
KEYWORDSPrincipal Fire Engineer, Consultancy, Fire Engineering, Fire Engineering Lead, Technical Lead, Fire Engineering Leader, Strategy, Structural Materials, Evacuation Plans, Life-saving Fire Systems, Building Design, Fire Risk Assessments, Active Fire Protection Systems, Passive Fire Protection, Fire Strategy Reports, Hydraulic Calculations, Heat Transfer Analysis, CAD & BIM Software, Revit, AutoCAD, Health and Safety Regulations, APM, RICS
Please note that due to a high level of applications, we can only respond to applicants whose skills and qualifications are suitable for this position. No terminology in this advert is intended to discriminate against any of the protected characteristics that fall under the Equality Act 2010.
Bowerford Associates Ltd is acting as an Employment Agency in relation to this vacancy.....Read more...
Electrical maintenance
Mechanical maintenance
Preventative maintenance
Continuous improvement maintenance
Instrumentation maintenance
Training:
Initial off the job practical training
Level 3 Diploma Advanced Manufacturing Engineering (Development Technical Knowledge). Day release at college for two academic years
In house training within the employer, learning relevant skills to become an engineering fitter
Certificate of Apprenticeship from the Institute for Apprenticeships and Technical Education (IfATE)
Training Outcome:Once the apprentices have completed the 42 months training and successfully passed the End Point Assessment of the apprenticeship, they will be able to maintain/repair/install to a high level, complex equipment/installations.Employer Description:Thousands of North East employees have taken the first steps in their successful careers with a Tyne North Training apprenticeship. We provide apprenticeships in the Engineering across various sectors in different employers based in the north east of England, including Newcastle Upon Tyne. We work alongside leading manufacturing and engineering employers throughout the local area across Northumberland and Tyne and Wear who are looking for aspiring Engineering apprentices to join them in September 2026.Working Hours :Days and shifts to be confirmed.Skills: Communication skills,Attention to detail,Organisation skills,Problem solving skills,Number skills,Logical,Team working,Initiative....Read more...
£14.00-£15.00 starting DOE, Standard days – no weekend work, Permanent secure role, OT paid at 150%, On-going training and development to progress career further, Clear progression routes supported by management A well-recognised engineering business is looking to recruit a Mechanical Assembler as part of its continued growth and future growth plans. This is a long-term opportunity to join a stable, well-invested engineering company that designs, builds and installs specialist vehicles and equipment systems.Full training and specialist tools are provided, so this role accepts applicants of all levels of skillset making this ideal for someone with hands-on experience, who is keen to build a career in engineering/manufacturing.The Mechanical Assembler Role You will be trained to assemble and install mechanical, hydraulic and mechanical systems onto vehicles and specialist equipment. This is not repetitive factory work -it’s varied, bespoke, practical engineering in a modern workshop.Your duties will include as our Mechanical Assembler:
General mechanical build and fitting work
Assembling and fitting hydraulic, and some electrical systems
Installing components onto vehicles and specialist equipment
Reading and working from engineering drawings & schematics
MIG welding (training provided)
Working to high quality and safety standards
Who This Mechanical Assembler Role Suits You don’t need formal qualifications — the business is looking for someone with practical mechanical ability and the right attitude.This Mechanical Assembler role would suit someone who has:
Worked on vehicles, plant or machinery
Experience in mechanical fitting, assembly or production in a bespoke environment
Someone with a basic tool kit
A strong interest in engineering or hands-on work
A reliable, hardworking and keen-to-learn approach
What’s on Offer for our Mechanical Assembler
£14.00 – £15.00 per hour starting
Overtime available paid at 150%
Full training & skill development
Permanent position
Clean, well-equipped workshop
Friendly, supportive engineering team
Long-term job security
If you are interested in this Mechanical Assembler role, please apply now or contact Grace at E3 Recruitment....Read more...
DAYS ONLY, MON to FRI (NO NIGHTS) permanant role, you will be joining a leading specialist that transforms materials into high-quality products for the construction and manufacturing sectors, based near Peterborough. Excellent training, ongoing development and clear career advancement opportunities are provided.Location: PeterboroughWhat’s in it for you as a Maintenance Engineer • £46,755 salary (OTE £50K) • MON to FRI – 05:45 to 14:15 and 13:45 to 22:15, one week rotation. (DAYS ONLY)** NO NIGHTS*** • 31 days’ holiday (pro rata), increasing by one day each year up to 36 days, including bank holidays. • Peterborough location is easily accessible from Stamford, Huntingdon, March, Spalding, Bourne, Wisbech, Grantham, Oundle, Ely, Northampton, Bedford, Corby, Kettering • Overtime available at 1.5x and 2x • KPI Bonus • Company pension • Excellent training, ongoing development and clear career advancement opportunitiesMain Responsibilities of the Maintenance Engineer • Providing full plant-wide maintenance support, repairs and technical assistance to ensure production output and efficiency targets are consistently achieved • Carrying out maintenance on a wide range of factory manufacturing machinery and automated equipment • Supporting machine set-ups and changeovers, ensuring compliance with QA standards and maximising efficiency during production transitions • Identifying faults, diagnosing issues and implementing effective and permanent engineering solutionsRequirements for the Maintenance Engineer • Recognised Engineering Apprenticeship to become a Maintenance Engineer / Electrical Engineer/ Maintenance Engineer, Shift Engineer, NVQ Level 2–5 in Mechanical or Electrical Engineering, BTEC National Diploma or Extended Diploma in Engineering (Mechanical or Electrical), City & Guilds qualifications in Engineering, Electrical Installation. • Experience with industrial machinery, conveyors, pumps, motors, and automation systems • Strong awareness of Health & Safety and safe working practices • Proven ability to fault-find, repair and resolve engineering issues confidently • Previous experience working as a Maintenance Engineer or in a similar engineering maintenance roleTo apply for the Maintenance Engineer / Electrical Engineer/ Maintenance Engineer role, we would love to receive CVs frp, Mechanical Maintenance Engineer, Electrical Maintenance Engineer, Maintenance Fitter, Maintenance Electrician, Multi-Skilled Engineer, or anyone with strong industrial maintenance experience.Please click the link and apply for this DAYS ONLY Maintenance Engineer / Electrical Engineer/ Maintenance Engineer role, thank you Fiona McSheffrey, E3 Recruitment.....Read more...
£14.00-£16.00 starting DOE, Standard days – no weekend work, Permanent secure role, OT paid at 150%, On-going training and development to progress career further, Clear progression routes supported by management A well-recognised, respected engineering business is looking to recruit a Mechanical Technician as part of its continued growth and future growth plans. This is a long-term opportunity to join a stable, well-invested engineering company that designs, builds and installs specialist vehicles and equipment systems.Full training and specialist tools are provided for our mechanical technician, so this role accepts applicants of all levels of skillset making this ideal for someone with hands-on experience, who is keen to build a career in engineering/manufacturing.The Mechanical Technician Role You will be trained to assemble and install mechanical, hydraulic and mechanical systems onto vehicles and specialist equipment. This is not repetitive factory work -it’s varied, bespoke, practical engineering in a modern workshop.Your duties will include:
General mechanical build and fitting work
Assembling and fitting hydraulic, and some electrical systems
Installing components onto vehicles and specialist equipment
Reading and working from engineering drawings & schematics
MIG welding (training provided)
Working to high quality and safety standards
Who The Mechanical Technician Role Suits You don’t need formal qualifications — the business is looking for someone with practical mechanical ability and the right attitude.This mechanical technician role would suit someone who has:
Worked on vehicles, plant or machinery
Experience in mechanical fitting, assembly or production in a bespoke environment
Someone with a basic tool kit
A strong interest in engineering or hands-on work
A reliable, hardworking and keen-to-learn approach
What’s on Offer for our Mechanical Technician
£14.00 – £16.00 per hour starting
Overtime available paid at 150%
Full training & skill development
Permanent position
Clean, well-equipped workshop
Friendly, supportive engineering team
Long-term job security
If you are interested in this Mechanical Technician role, please apply now or contact Grace at E3 Recruitment....Read more...
CAD TechnicianPreston£28,000 – £35,000 Basic + Full Training + Career Progression + Job Satisfaction + Stability + Work Life Balance + Holiday + Healthcare + Monday – Friday Role + BonusSolidify your career now as a CAD Technician where you’ll receive full training and ongoing support to become a specialist in your field, with genuine day-to-day job satisfaction. You’ll benefit from an excellent work life balance and the opportunity to grow in a stable, varied role within a supportive technical team. Join now and enjoy long-term stability, development, and an attractive overall package.This company designs and manufactures specialist systems for commercial and industrial applications. Due to continued growth, they are looking for an additional CAD Technician to join their highly skilled design and engineering team. You’ll work with cutting-edge technology and play a key role in exciting projects from concept through to completion.
The CAD Technician Role Will Include:
* Creating detailed CAD drawings and Building Information Models (BIM) *Working closely with engineering, manufacturing, and project teams * Office-based role in Preston * Meeting internal and customer deadlines
The Successful CAD Technician Will Have:
*Any CAD background (AutoCAD, SolidWorks, Inventor, or similar) * Engineering, construction, or design background (preferred but not essential) *Strong attention to detail and ability to read technical drawings *Ability to commute to Preston sitePlease apply or send your CV to for immediate consideration.Keywords:CAD Technician, Junior CAD Technician, Design Technician, CAD Designer, Mechanical CAD Technician, Electrical CAD Technician, Draughtsperson, Draftsperson, AutoCAD, SolidWorks, Inventor, 2D CAD, 3D CAD, Engineering Design, Manufacturing, Technical Drawings, Preston, Lancashire, Chorley, Leyland, Blackburn, Blackpool, Bolton, Wigan, Lancaster, PR1, PR2, PR3, PR4, PR5, PR6, PR7This vacancy is being advertised by Future Engineering Recruitment Ltd. The services of Future Engineering Recruitment Ltd are that of an Employment Agency.Future Engineering Recruitment Ltd can only accept applications from candidates who have a valid legal right to work in the United Kingdom. Candidates without this right, or with pending applications, should not apply as their details will not be processed. We endeavour to respond to all applicants; however, due to the volume of applications received, we can only guarantee contact with candidates who have been shortlisted.....Read more...
Our client is an international multi-service provider, offering textile, hygiene and facility service solutions across multiple sectors operating across the UK.
Job Role & Key Responsibilities:
The role involves supporting site engineering operations by carrying out planned and reactive maintenance, equipment repairs, and improvement projects. Working closely with the engineering team, the successful candidate will help ensure machinery, infrastructure, and systems operate safely, efficiently, and reliably within a shift-based environment.
Key Responsibilities:
Carry out day-to-day breakdown maintenance and planned preventative maintenance (PPM)
Support equipment updates, new installations, and site or infrastructure upgrades
Ensure all work is completed in line with health & safety standards and engineering best practices
Communicate effectively during shift handovers to ensure continuity of work
Identify recurring faults and contribute to continuous improvement initiatives
Perform repairs and remedial works safely and efficiently, keeping relevant teams informed
Report incidents, near misses, and maintenance issues as required
Maintain strong communication with colleagues and production staff
The Ideal Candidate will have:
A recognised engineering qualification (mechanical, electrical, or similar)
Experience in either mechanical or electrical engineering, with the ability to support both where required
Strong working knowledge of maintenance environments and fault finding
The ability to work a rotating 4-on / 4-off shift pattern, including days and nights
Good verbal and written English communication skills
Desirable Skills:
Dual-skilled mechanical and electrical experience
Apprenticeship background
Electrical installation and maintenance experience
Mechanical fabrication and maintenance skills
Electronic fault finding to component level
Knowledge of pneumatics, hydraulics, or steam systems
Additional training or certifications relevant to maintenance engineering
Sponsorship may be considered for candidates who meet the required criteria
Benefits Include:
Competitive salary (approximately 50k)
4-on / 4-off shift pattern (12-hour day and night shifts)
Pension scheme
Employee assistance programme
Opportunities for development and career progression within a structured engineering environment
If you are interested in this exciting opportunity, please get in touch with us or apply below. ....Read more...
Engineers are able to solve real-world problems using a combination of mechanical and electrical engineering expertise
This occupation requires the understanding of software programming, the ability to interpret data, the use of a range of CAD and software tools, and the operation of mechanical systems via electrical, pneumatic or hydraulic means
Training:Qualifications included:
Engineering Manufacturing Technician Apprenticeship Standard. Company Training Plan & Assessment
BTEC Level 4 Higher National Certificate in Engineering (1 day per week for 2 years at college)
Level 4 Diploma in Engineering and Advanced Manufacturing (Development Competence)
Level 2 Functional Skills - maths (If required)
Level 2 Functional Skills - English (If required)
End Point Assessment at the end of the apprenticeship (Months 36 to 39)
Training Outcome:
The opportunity to earn while you learn will give you a great start in your career, you won’t just learn the theory behind a Engineering apprenticeship, you will have the opportunity to put that theory into practice and work on real-world projects throughout your time with us
Employer Description:At Lucy Group we pride ourselves on the development of our people, this role is being brought into the business as a purely developmental role within the engineering department.
Lucy Electric is a global leader in secondary power distribution solutions, with over 100 years of experience in the electrical industry. Headquartered in the UK, we operate across key international markets including the Middle East, Asia, Africa, Australia, and South America, with offices and manufacturing facilities in the UK, UAE, Saudi Arabia, India, Thailand, South Africa and Brazil.
We specialise in medium voltage switch gear, automation, and grid monitoring technologies that enable utilities and energy providers world-wide to build smarter, more resilient, and more sustainable power networks.
Our advanced solutions – such as ring main units, remote control systems, and low-voltage monitoring are instrumental in accelerating the global transition to Net Zero, delivering enhanced reliability, safety, and operational efficiency across the grid.Working Hours :Monday - Friday, 8.30am - 4.30pmSkills: Communication skills,IT skills,Attention to detail,Organisation skills,Problem solving skills,Presentation skills,Number skills,Analytical skills,Logical,Team working,Initiative,Interest in Engineering,Time Management,Motivated,Good Work-Ethics,Punctual,Keen to Learn....Read more...
Key Responsibilities:
Assist with dismantling, cleaning, inspecting and reassembling rail components such as traction motors and generators
Support engineers with routine maintenance, fault‑finding and basic repair tasks
Help with mechanical tasks including fitting, basic machining, grinding and preparing parts for overhaul
Take part in electrical testing and inspection activities under supervision
Assist in the refurbishment of bogie components and other mechanical assemblies
Learn to use workshop tools, measuring equipment and engineering machinery safely and correctly
Maintain accurate workshop records and follow quality‑control procedures
Keep the workshop clean, organised and compliant with health & safety standards
Shadow experienced technicians to build technical knowledge and practical engineering skills
Training:Year 1 - Full‑Time College:
You’ll spend your first year at college working towards a Level 2 or Level 3 engineering qualification. This gives you the foundation knowledge and core skills you’ll need before joining the team on-site
Years 2, 3 & 4 - On‑Site Development:
From your second year onwards, you’ll be based within our engineering teams. You’ll gain hands‑on experience, apply what you’ve learned, and continue your studies towards a Level 3 qualification and your final Apprenticeship Standard
Throughout this time you’ll receive regular mentoring, internal training, and opportunities to broaden your experience across different engineering tasks
Training Outcome:
Clear progression routes, with many past apprentices now thriving in leadership and specialist roles
Employer Description:Sulzer is a global leader in fluid engineering, renowned for its expertise in pumps, agitators, compressors, and critical rotating equipment across various industries. With a legacy spanning over 190 years, Sulzer operates in more than 180 locations worldwide, delivering cutting-edge engineering solutions that drive efficiency and sustainability. In 2025, Sulzer was once again recognised as one of the UK’s Top Employers by the Top Employers Institute, reflecting its commitment to excellence in employee development, workplace culture, and career progression.Working Hours :07:30-16:00 Mon to Thur.
06:30-15:00 FriSkills: Communication skills,Attention to detail,Problem solving skills,Analytical skills,Logical,Team working....Read more...
As an Engineering Apprentice, you’ll become a key part of the team that keeps ABP running smoothly. Here’s what your role will include:
Maintenance Pro: Help keep machinery and equipment in top condition to ensure smooth production.
Fix It First: Respond quickly to breakdowns, identify issues, and find solutions to get things back on track.
Continuous Improvement: Assist with upgrading systems and processes to make things run better.
Hands-On Learning: Be involved in machinery setups, changeovers, and repairs.
Learn From Experts: Combine practical work with training sessions to develop your skills and knowledge.
Training:Level 3 qualification in Food & Drink Engineering Maintenance:
Under the guidance of the Site Engineering Manager, you'll spend dedicated blocks of learning at a national apprenticeship provider’s state-of-the-art facility within the Midlands, gaining hands-on experience and academic learning. You’ll then return to the site to apply your knowledge, working closely with the on-site engineering team and a dedicated mentor.
Please note: The location of the training facility in Coventry in the West Midlands where you will go on a 20-week block release from September to January in Year 1, followed by three additional shorter blocks in Year 2 and Year 3. Accommodation is provided at no cost.
Training Outcome:This apprenticeship offers a gateway to a rewarding engineering career at ABP. Upon completion, you'll be equipped with extensive experience and qualifications, opening doors to various roles within the engineering field. With over 18 sites across the UK and Northern Ireland, opportunities may arise for development and growth within the business.Employer Description:ABP Food Group is one of Europe’s leading integrated agri-food businesses, with divisions specialising in food production, pet food and renewables. Over our 70-year history, we have grown to 14,000 strong team and have built a reputation for quality and innovation. ABP UK, part of the ABP Food Group produces quality fresh and frozen beef, lamb and frozen meat-free products to some of the nations leading supermarkets and restaurants, including a number of Michelin Star establishments!Working Hours :Monday to Friday (with specific timings to be confirmed at interview), with progression onto the Engineering shift pattern.Skills: Attention to detail,Problem solving skills,Number skills,Analytical skills,Team working....Read more...
Highway Engineer required to join a civil engineering team delivering highways and public payment systems. You will prepare and develop concepts, designs and specific elements for both foreign and domestic Highway Authorities, also private developers.
Requirements
Highway design civil engineering experience.
Civil 3D and AutoCAD experience producing drawings, models, schedules etc.
Construction Design and Management Regulations or CDM for national and local highway design.
MEng or BEng in Engineering.
Working towards Chartered Civil Engineer (CEng).
Responsibilities
Highway and public transport design.
Producing drawings,
Manage design packages
Site visits to measure and assess progress.
Assess Road construction methods, materials, and quality....Read more...
We are looking for an experienced Mechanical Fitter to join our engineering team. You will be responsible for assembling and fitting complex mechanical equipment used in advanced industrial applications.
Key Responsibilities
Mechanical assembly of large and small components
Reading and working from engineering drawings
Fitting pipework, pumps, valves and mechanical systems
Aligning and testing mechanical parts
Ensuring all work meets quality and safety standards
Supporting installation and commissioning when required
Requirements
Previous experience as a Mechanical Fitter or similar role
Ability to read and interpret technical drawings
Strong attention to detail
Experience working in a manufacturing or engineering environment....Read more...
Highway Engineer required to join a civil engineering team delivering highways and public payment systems. You will prepare and develop concepts, designs and specific elements for both foreign and domestic Highway Authorities, also private developers.
Requirements
Highway design civil engineering experience.
Civil 3D and AutoCAD experience producing drawings, models, schedules etc.
Construction Design and Management Regulations or CDM for national and local highway design.
MEng or BEng in Engineering.
Working towards Chartered Civil Engineer (CEng).
Responsibilities
Highway and public transport design.
Producing drawings,
Manage design packages
Site visits to measure and assess progress.
Assess Road construction methods, materials, and quality....Read more...
We are seeking a Lead Electrical Engineer to join a leading manufacturer based in the Arnold area of Nottingham, working days Monday to Friday 8am-4pm.
The salary being offered the Lead Electrical Engineer is £52,400, The role comes with fantastic company benefits, pension match of up to 10%, and job security working for a market leader, that values its employees. The Lead Electrical Engineer will be a technical professional who champions continuous improvement and provides engineering leadership. What’s in it for you as a Lead Electrical Engineer:
Basic salary circa £52,400 per annum,
Hours of work – 40hrs Monday to Friday 8am-4pm
In addition, you have a matched pension of up to 10%, share options, as well as an extensive benefits program such as a cycle to work scheme, shopping discounts etc.
Training and career development, including health and safety training, cross-skilling and upskilling
Job security and personal development within a market-leading, international manufacturing organisation
Leadership and management training for those who are keen to progress their careers and demonstrate ambition
Main Duties & Responsibilities of the Lead Electrical Engineer:
Supporting the development of the Engineering Team and back up the electrical department
Identifying maintenance issues, designing solutions, sourcing parts and planning the work with the maintenance teams to implement
Working with the factory management team to ensure development, promotion and implementation of Company, Factory and Team plans
Provision of engineering and technical expertise utilising the information generated through the RCA and FMEA processes to identify areas of improvement
The collection, assimilation and analysis of engineering, production and process data and its effective use to develop and achieve key targets and objectives through Continuous Improvement
Encourage and promote team-working at all times, nurturing ideas, opinions and a positive continuous improvement culture
Planning and managing improvement projects, contribute to the budgeting process and potential Capital Spend
Deputising for the Engineering Manager
Promoting the highest Health and Safety standards to ensure a safe working environment.
Required experience and Qualifications Required for Lead Electrical Engineer:
Engineering experience in a similar process environment
Qualified to HNC level or equivalent in an engineering discipline (preferably electrical bias)
Ideally apprentice trained in electrical engineering
Recognised Health and Safety experience and qualification; ideally NEBOSH certificate
Leadership experience developing successful teams
Demonstrable experience of project management
Knowledge and experience of utilising and implementing Continuous Improvement such as Route Cause Analysis, 5S, Kaizen etc
We welcome applications for the Lead Electrical Engineer role from individuals who have either electrical maintenance, reliability, continuous improvement, process and team leader backgrounds.
If you are interested in the Lead Electrical Engineer role, please apply now…....Read more...
