I am currently seeking a Site Engineer to work with a UK Contractor on a Groundwork project on Sizewell C (Leiston).
This role would include but not be limited to the below:
Site Setting Out
Site Documentation – ITP, RAM, QA
Ensuring health and safety on site
General Site Engineering duties
The ideal candidate will have:
Previous experience as a Site Engineer, Setting Out Engineer, Engineering Surveyor or similar
CSCS, , 2x References
Relevant experience within Civils, Groundworks
Degree within Engineering, Construction or similar
If you are keen apply now or for more information please contact Sam Jaffe at Cavendish.
Cavendish (Recruitment) Professionals Ltd are proud to be an equal opportunity employer and we believe that inclusivity begins with the candidate experience. All qualified applicants will receive consideration for employment regardless of, gender, race, age, sexual orientation, religion, or belief.....Read more...
We are seeking a FPGA firmware engineer, specialising in the design and development of advanced electronics hardware, including power systems, analogue, digital, and RF components. In this role, you will oversee the complete firmware development cycle, from negotiating requirements and drafting design architecture to validating and verifying the final product.
Main Duties
Design and implement high-quality FPGA firmware, incorporating signal processing and high-speed data interfaces.
Create and execute testbenches to verify FPGA firmware functionality.
Develop firmware for complex FPGAs, SoCs, and PLDs, ensuring optimal performance.
Conduct firmware testing on actual hardware systems.
Technical Expertise
A degree in Electrical Engineering, Communications Engineering
Strong foundation in electronic engineering, including binary number systems and digital logic design (RTL level).
Proficiency in HDL languages (VHDL or Verilog) and a minimum of two years of experience as a firmware developer.
Comprehensive understanding of FPGA architecture and signal processing for RF signals, ADCs, and DACs.
Familiarity with digital electronic and DSP design principles.
Experience with Xilinx FPGAs
Competence in using lab equipment such as oscilloscopes, spectrum analysers, RF signal generators, and network analysers.
Knowledge of Linux, Git, TCL, and C programming.....Read more...
We are seeking a FPGA firmware engineer, specialising in the design and development of advanced electronics hardware, including power systems, analogue, digital, and RF components. In this role, you will oversee the complete firmware development cycle, from negotiating requirements and drafting design architecture to validating and verifying the final product.
Main Duties
Design and implement high-quality FPGA firmware, incorporating signal processing and high-speed data interfaces.
Create and execute testbenches to verify FPGA firmware functionality.
Develop firmware for complex FPGAs, SoCs, and PLDs, ensuring optimal performance.
Conduct firmware testing on actual hardware systems.
Technical Expertise
A degree in Electrical Engineering, Communications Engineering
Strong foundation in electronic engineering, including binary number systems and digital logic design (RTL level).
Proficiency in HDL languages (VHDL or Verilog) and a minimum of two years of experience as a firmware developer.
Comprehensive understanding of FPGA architecture and signal processing for RF signals, ADCs, and DACs.
Familiarity with digital electronic and DSP design principles.
Experience with Xilinx FPGAs
Competence in using lab equipment such as oscilloscopes, spectrum analysers, RF signal generators, and network analysers.
Knowledge of Linux, Git, TCL, and C programming.....Read more...
As a Civil Engineering Apprentice, you will work with an experienced team of Engineers, who will support you.Civil Engineers are the construction professionals who make up our site supervisory and management team. Our Civil Engineering Apprentices work predominantly on site, turning designs into reality. Your day to day will include:
Project Support
Collaborating with experienced engineers on the design, planning and execution of civil engineering projects
Communicating effectively at all levels
Assist with planning and coordination of site activities
Maintaining good working relationships with client, designer, supply chain and others
Technical Development
Gain hands-on experience with engineering tools and processes
Learn how to use specialist setting out equipment
Problem Solving
Learn how to overcome challenges on live projects
Drive quality through effective planning and right first time delivery
On-Site Experience
Be part of real construction projects and work closely with our skilled workforce, applying your learning and knowledge in real world scenarios
Maintain diaries of site activity
Safety and Sustainability
Help to ensure that work is carried out safely in line with the company Health and Safety
Maintaining high personal standards in Health and Safety
Maintaining high standards in environmental awareness and behaviour
Monitoring and recording delivery against the agreed programme and construction methods
Ensuring that works are accurately and clear set out before work commences
Training:Our Technical Apprenticeship is a five year programme and is designed to help you grow step by step:
Years 1–2: Level 4 Higher Apprenticeship
You’ll work towards a Higher Apprenticeship in Civil Engineering and complete a Higher National Certificate (HNC). During this time, you’ll also start working towards professional recognition with the Institute of Civil Engineers (ICE).
Years 3–5: Level 6 Degree Apprenticeship
After successfully completing Level 4, you’ll have the opportunity to progress to a Degree Apprenticeship, gaining a full honours degree and continuing your journey towards Incorporated Membership of the ICE.
Our Civil Engineering apprenticeship is delivered by Leeds College of Building on a block release (periods of study away from work) basis with accommodation provided.
When you're not at college, you will be developing your site experience, learning from industry specialists.Training Outcome:At BAM we are committed to investing in your development. Upon completion of our Level 4 apprenticeship, you will recieve a promotion and the opportunity to progress on to our Degree programme.
After completing the full 5 year programme with BAM most of our apprentices have their full Degree, Incorporated membership of the Institute of Civil Engineers and are earning in excess of £30,000 + company car / allowance.Employer Description:Building a sustainable tomorrow. That’s our mission and our promise at BAM. It’s how we engineer vital infrastructure and construct high-quality buildings as one of the largest construction companies in Europe.
We strive to create an environment where everybody feels welcome and valued. We’re on an exciting journey to employ the best talent to join us regardless of social background, race, colour, religion, national or ethnic origin, sexual orientation, gender identity or expression, age, disability or other characteristics.
With around 6,500 employees, we operate in Construction, Civil Engineering, Ground Engineering, Energy, Property Development, Facilities Management, and Site Solutions. Safety is our top priority—always before profit.
We’re proud to be an award-winning employer to ranked in HigherIns’ Top 100 Apprenticeship Employers for three years in a row, Gold Members of The 5% Club for two years, and winners of the Employer Award for Construction Services at the Multicultural Awards 2024 and 2025. Working Hours :Monday - Friday (42.5 hours per week). Working times on site vary, but are typically between 7:30am - 5.30pm.Skills: Communication skills,IT skills,Attention to detail,Organisation skills,Problem solving skills,Number skills,Analytical skills,Logical....Read more...
As a Civil Engineering Apprentice, you will work with an experienced team of Engineers, who will support you. Civil Engineers are the construction professionals who make up our site supervisory and management team. Our Civil Engineering Apprentices work predominantly on site, turning designs into reality. Your day-to-day will include:
Project Support
Collaborating with experienced engineers on the design, planning and execution of civil engineering projects
Communicating effectively at all levels
Assist with planning and coordination of site activities
Maintaining good working relationships with client, designer, supply chain and others
Technical Development
Gain hands-on experience with engineering tools and processes
Learn how to use specialist setting out equipment
Problem-Solving
Learn how to overcome challenges on live projects
Drive quality through effective planning and right first time delivery
On-Site Experience
Be part of real construction projects and work closely with our skilled workforce, applying your learning and knowledge in real world scenarios
Maintain diaries of site activity
Safety and Sustainability
Help to ensure that work is carried out safely in line with the company Health and Safety
Maintaining high personal standards in Health and Safety
Maintaining high standards in environmental awareness and behaviour
Monitoring and recording delivery against the agreed programme and construction methods
Ensuring that works are accurately and clear set out before work commences
Training:Our Technical Apprenticeship is a five-year programme and is designed to help you grow step by step:
Years 1–2: Level 4 Higher Apprenticeship
You’ll work towards a Higher Apprenticeship in Civil Engineering and complete a Higher National Certificate (HNC). During this time, you’ll also start working towards professional recognition with the Institute of Civil Engineers (ICE).
Years 3–5: Level 6 Degree Apprenticeship
After successfully completing Level 4, you’ll have the opportunity to progress to a Degree Apprenticeship, gaining a full honours degree and continuing your journey towards Incorporated Membership of the ICE.
Our Civil Engineering apprenticeship is delivered by Leeds College of Building on a block release (periods of study away from work) basis with accommodation provided.
When you're not at college, you will be developing your site experience, learning from industry specialists.Training Outcome:At BAM, we are committed to investing in your development. Upon completion of our Level 4 apprenticeship, you will receive a promotion and the opportunity to progress on to our Degree programme.
After completing the full 5-year programme with BAM, most of our apprentices have their full Degree, Incorporated membership of the Institute of Civil Engineers and are earning in excess of £30,000 + company car / allowance.Employer Description:Building a sustainable tomorrow. That’s our mission and our promise at BAM. It’s how we engineer vital infrastructure and construct high-quality buildings as one of the largest construction companies in Europe.
We strive to create an environment where everybody feels welcome and valued. We’re on an exciting journey to employ the best talent to join us regardless of social background, race, colour, religion, national or ethnic origin, sexual orientation, gender identity or expression, age, disability or other characteristics.
With around 6,500 employees, we operate in Construction, Civil Engineering, Ground Engineering, Energy, Property Development, Facilities Management, and Site Solutions. Safety is our top priority—always before profit.
We’re proud to be an award-winning employer to ranked in HigherIns’ Top 100 Apprenticeship Employers for three years in a row, Gold Members of The 5% Club for two years, and winners of the Employer Award for Construction Services at the Multicultural Awards 2024 and 2025. Working Hours :Monday - Friday (42.5 hours per week). Working times on site vary. Our Hinkley site operates a shift system.Skills: Communication skills,IT skills,Attention to detail,Organisation skills,Problem solving skills,Number skills,Analytical skills,Logical....Read more...
As a Civil Engineering Apprentice, you will work with an experienced team of engineers who will support you. Civil engineers are the construction professionals who make up our site supervisory and management team. Our Civil Engineering Apprentices work predominantly on site, turning designs into reality. Your day to day will include:
Project Support
Collaborating with experienced engineers on the design, planning and execution of civil engineering projects
Communicating effectively at all levels
Assist with planning and coordination of site activities
Maintaining good working relationships with the client, designer, supply chain and others
Technical Development
Gain hands-on experience with engineering tools and processes
Learn how to use specialist setting out equipment
Problem Solving
Learn how to overcome challenges on live projects
Drive quality through effective planning and right first time delivery
On-Site Experience
Be part of real construction projects and work closely with our skilled workforce, applying your learning and knowledge in real world scenarios
Maintain diaries of site activity
Safety and Sustainability
Help to ensure that work is carried out safely in line with the company's health and safety
Maintaining high personal standards in health and safety
Maintaining high standards in environmental awareness and behaviour
Monitoring and recording delivery against the agreed programme and construction methods
Ensuring that work is accurately and clearly set out before work commences
Training:Our Technical Apprenticeship is a five-year programme and is designed to help you grow step by step:
Years 1–2: Level 4 Higher Apprenticeship.
You’ll work towards a Higher Apprenticeship in Civil Engineering and complete a Higher National Certificate (HNC). During this time, you’ll also start working towards professional recognition with the Institute of Civil Engineers (ICE).
Years 3–5: Level 6 Degree Apprenticeship.
After successfully completing Level 4, you’ll have the opportunity to progress to a Degree Apprenticeship, gaining a full honours degree and continuing your journey towards Incorporated Membership of the ICE.
Our Civil Engineering apprenticeship is delivered by Leeds College of Building on a block release (periods of study away from work) basis, with accommodation provided.
When you're not at college, you will be developing your site experience, learning from industry specialists.Training Outcome:At BAM we are committed to investing in your development. Upon completion of our Level 4 apprenticeship, you will recieve a promotion and the opportunity to progress on to our Degree programme.
After completing the full 5-year programme with BAM, most of our apprentices have their full Degree, Incorporated membership of the Institute of Civil Engineers and are earning in excess of £30,000 + company car/allowance.Employer Description:Building a sustainable tomorrow. That’s our mission and our promise at BAM. It’s how we engineer vital infrastructure and construct high-quality buildings as one of the largest construction companies in Europe.
We strive to create an environment where everybody feels welcome and valued. We’re on an exciting journey to employ the best talent to join us regardless of social background, race, colour, religion, national or ethnic origin, sexual orientation, gender identity or expression, age, disability or other characteristics.
With around 6,500 employees, we operate in Construction, Civil Engineering, Ground Engineering, Energy, Property Development, Facilities Management, and Site Solutions. Safety is our top priority—always before profit.
We’re proud to be an award-winning employer to ranked in HigherIns’ Top 100 Apprenticeship Employers for three years in a row, Gold Members of The 5% Club for two years, and winners of the Employer Award for Construction Services at the Multicultural Awards 2024 and 2025. Working Hours :Monday - Friday (42.5 hours per week). Working times on site vary, but are typically between 7:30am - 5.30pm.Skills: Communication skills,IT skills,Attention to detail,Organisation skills,Problem solving skills,Number skills,Analytical skills,Logical....Read more...
As a Civil Engineering Apprentice, you will work with an experienced team of engineers who will support you. Civil engineers are the construction professionals who make up our site supervisory and management team. Our Civil Engineering Apprentices work predominantly on site, turning designs into reality. Your day to day will include:
Project Support
Collaborating with experienced engineers on the design, planning and execution of civil engineering projects
Communicating effectively at all levels
Assist with planning and coordination of site activities
Maintaining good working relationships with the client, designer, supply chain and others
Technical Development
Gain hands-on experience with engineering tools and processes
Learn how to use specialist setting out equipment
Problem Solving
Learn how to overcome challenges on live projects
Drive quality through effective planning and right first-time delivery
On-Site Experience
Be part of real construction projects and work closely with our skilled workforce, applying your learning and knowledge in real world scenarios
Maintain diaries of site activity
Safety and Sustainability
Help to ensure that work is carried out safely in line with the company's health and safety
Maintaining high personal standards in health and safety
Maintaining high standards in environmental awareness and behaviour
Monitoring and recording delivery against the agreed programme and construction methods
Ensuring that work is accurately and clearly set out before work commences
Training:Our Technical Apprenticeship is a five-year programme and is designed to help you grow step by step:
Years 1–2: Level 4 Higher Apprenticeship.
You’ll work towards a Higher Apprenticeship in Civil Engineering and complete a Higher National Certificate (HNC). During this time, you’ll also start working towards professional recognition with the Institute of Civil Engineers (ICE).
After successfully completing Level 4, you’ll have the opportunity to progress to a Degree Apprenticeship, gaining a full honours degree and continuing your journey towards Incorporated Membership of the ICE.
Years 3–5: Level 6 Degree Apprenticeship.
Our Civil Engineering apprenticeship is delivered by Leeds College of Building on a block release (periods of study away from work) basis, with accommodation provided.
When you're not at college, you will be developing your site experience, learning from industry specialists.Training Outcome:At BAM we are committed to investing in your development. Upon completion of our Level 4 apprenticeship, you will receive a promotion and the opportunity to progress on to our Degree programme.
After completing the full 5-year programme with BAM, most of our apprentices have their full Degree, Incorporated membership of the Institute of Civil Engineers and are earning in excess of £30,000 + company car/allowance. Employer Description:Building a sustainable tomorrow. That’s our mission and our promise at BAM. It’s how we engineer vital infrastructure and construct high-quality buildings as one of the largest construction companies in Europe.
We strive to create an environment where everybody feels welcome and valued. We’re on an exciting journey to employ the best talent to join us regardless of social background, race, colour, religion, national or ethnic origin, sexual orientation, gender identity or expression, age, disability or other characteristics.
With around 6,500 employees, we operate in Construction, Civil Engineering, Ground Engineering, Energy, Property Development, Facilities Management, and Site Solutions. Safety is our top priority—always before profit.
We’re proud to be an award-winning employer to ranked in HigherIns’ Top 100 Apprenticeship Employers for three years in a row, Gold Members of The 5% Club for two years, and winners of the Employer Award for Construction Services at the Multicultural Awards 2024 and 2025. Working Hours :Monday - Friday (42.5 hours per week). Working times on site vary, but are typically between 7:30am - 5.30pm.Skills: Communication skills,IT skills,Attention to detail,Organisation skills,Problem solving skills,Number skills,Analytical skills,Logical....Read more...
Head of Sales & Channel – MRO Engineering & Industrial
A newly created Business Development role with a real buzz factor — spearheading non-automotive sales channels for C-Class, Workshop Consumables across Engineering, Industrial, Rail, Food, Manufacturing, and any sector that has a need for MRO consumables. With a 98% first-pick rate across 20,000 + stocked items, customers partner up with this business as an extension of their own warehouse, handling high volume small value items and difficult to manage inventory. In short it’s an end to end managed consumables solution for industry.
UK Wide (Central/ Midlands) | £60k - £65k + Bonus + Car + Pension
The Mission: Drive growth in non-automotive markets — opening doors with Engineering Supplies networks, Industrial Distributors, and MRO suppliers. This is all about developing new business and expanding the reach of a proven consumables programme, integrating modern IT / ERP solutions with traditionally acquired products.
We’re Looking For: A Sales Development leader or Business Development pro from Engineering Supplies or Industrial Distribution with MRO supply chain know-how. If you’ve sold non-automotive Workshop Consumables before, that’s a big plus.
Top Skills & Experience:
Senior sales experience in MRO or a high-activity, field-based environment
Managing and developing major accounts in Engineering / Workshop Consumables
Strong track record of delivering sales growth
Gravitas to engage and influence at board level
Proficient in presentations & sales /market data analysis (Excel)
Clear, confident communicator
Highly organised, numerate, professional, and resilient
Willing to travel with occasional overnights
Smart, punctual, and impactful in first impressions
Apply Now: Online screen interviews will be conducted by our exclusive recruitment partner Glen Shepherd. Please call Glen for an initial conversation on 07977 266309 or email your current CV confidentially detailing how your experience meets with the above. We are hiring NOW so don’t delay.
JOB REF: 4284GSA....Read more...
E3 Recruitment is proudly supporting a highly respected global organisation in hiring for a permanent Mechanical Fitter position.
Overview:
This role presents an exciting opportunity to join a globally recognised engineering leader supplying to key industries including Defence, Power Generation, and Oil & Gas. It’s an excellent chance for a Mechanical Fitter to secure a permanent role and contribute to innovative projects on a global scale.
Location:
Based in Huddersfield with convenient access to the M62, this site is easily commutable from Halifax, Bradford, Leeds, Rochdale, Oldham, Manchester, Wakefield, Barnsley, Rotherham, and Sheffield.
Key Responsibilities of the Mechanical Fitter:
Assembling high-value rotating equipment, gearboxes, and ancillaries
Working from detailed technical and engineering drawings
Using precision measuring tools, including internal and external micrometres
Accurately recording build data, including serial and cast numbers
Compiling shift handover notes and communicating progress effectively
Maintaining a safe and organised working environment with strong housekeeping standards
Taking personal responsibility for health and safety, including hazard reporting and use of PPE
Supporting installations and inspections when required
Experience Required:
Previous experience working in a medium to heavy engineering environment
Ideally experienced in building and stripping rotating equipment, gearbox systems, and associated components
Qualifications:
A recognised qualification in Mechanical Engineering (e.g. Apprenticeship, NVQ, HNC, HND, or equivalent)
Shifts Available:
Multiple shift patterns are available to suit different schedules:
Base Salary (Day Shift): £37,379
AM/PM Shifts: £44,107
Continental Days: £54,666
Continental Nights: £57,937
Holiday Entitlement: 33 days (including public holidays)
This is an ideal position for a Mechanical Fitter who values teamwork and continuous improvement within a supportive and diverse working environment. Joining this team offers the opportunity for secure, full-time employment with a global engineering organisation.
For more information, contact Andrew Joseph at E3 Recruitment or click Apply Now.
Please note: this Roles is subject to UK security and export control regulations. Eligibility may be affected by your nationality, previous citizenships, and place of birth. You must have the Right to Work in the UK and meet all necessary security clearance requirements to be considered.....Read more...
The Job Product Development Engineer
The Company:
A leading manufacturer and systems engineering company who operate globally
Leading manufacturer within Hydraulics including Pumps, Valves, Motors & Systems
Offering world class products and newly designed products and systems to the Industrial and Off Highway Hydraulic market
Good opportunities for career growth and excellent training and professional development
Benefits of the Product Development Engineer
Salary £35k - £50k depending on experience
Pension
Laptop
25 days annual leave rising to 30 with service + bank holidays
The Role of the Product Development Engineer
You will be involved in supporting operations and helping with running of the factory, keep drawings up to date etc…
You will be responding to customer requests & making changes and tweaks to existing products to fit their requirement
You will also be involved in new product development such as increasing power/pressure for clients - digitalisation/electrification etc… As well as designing brand new products which will be used in the future
Working with customers on prototyping, lots of project work and software development. Doing design work on AutoCAD Inventor.
Design for Hydraulic Pumps, Motors, Valves & Systems as well as the software and controls etc...
Work within Industrial and Off Highway, Mobile OEM, Marine etc...
Writing technical reports and doing product development
Lead and oversee new product development projects
The Ideal Person for the Product Development Engineer
Degree qualified in a relevant engineering discipline - ideally a masters within Mechanical, Mechatronic, Integrated, Systems Engineering or maybe Electrical/Electronic Engineering.
Good Mechanical knowledge with ideally some knowledge around embedded electronics, software programming etc...
May consider a straight or recent graduate at the bottom end of the salary scale, though happy with experienced person at the top end.
Great if have design exp with Autodesk Inventor but MUST have design experience, not just a draughtsman.
Able to design and create technical products.
Consider good design/product development experience within any Mechanical products such as Pneumatics, Pumps, Valves, Motors, Gearboxes etc...
Good communications, team player, good eye for detail, driven, ability to write reports.
If you think the role of Product Development Engineer is for you, apply now!
Consultant: Bjorn Johnson
Email: bjorn@otrsales.co.uk
Tel no. 0208 397 4114
Candidates must be eligible to work and live in the UK.
About On Target
At On Target, we specialise in sales, technical and commercial jobs in the Engineering, Construction, Building Services, Medical & Scientific, and Commercial & Industrial Solutions sectors, enabling our consultants to become experts in their market sector. We place all levels of personnel, up to Director across the UK and internationally.....Read more...
Security Cleared Firmware Engineer – DSP Engineer - Cambridge – Spin-Out Company
A new Spin-Out company, based in Cambridge, providing product development for Security Cleared sectors, is currently looking for an experienced Firmware Engineer or DSP Engineer to work on a wide range of new technologies.
You will be working on a range of new technology inventions, providing expert approaches to Firmware Engineering and DSP Engineering applications. Due to the varied nature of the work, we ideally seek someone with knowledge of FPGA, DSP design and engineering, DSP Modelling, and design using embedded systems. Not all of these areas are required, but having experience in as many as possible in your past roles as a Firmware Engineer or DSP Engineer would be advantageous.
Specific experience working on high-speed electronic systems would be ideal but is not essential.
If you have previously worked in a security-cleared environment, it would be fantastic, although not essential as they are open to candidates from different sectors. However, you must be able to obtain security clearance. This usually means being a British Citizen or residing in the UK for five years in continuous employment. If you already hold security clearance from another source, this would be acceptable.
You are going to work on some extremely interesting projects that will help you continually develop your career. Apart from this, you will receive an excellent starting salary and a benefits package in line with the parent company, along with continuous career training for future progression.
We are looking for someone to start as soon as possible, so if you are interested, we recommend making an application now to avoid missing out. However, we understand you may have a long notice period, which can be normal in this sector.
For more information, please feel free to call Andrew Welsh, Director of Medical Devices Recruitment and Scientific Recruitment Specialist at Newton Colmore, on 0121 268 2240, or submit an application, and one of our team members at Newton Colmore will contact you.
Newton Colmore Consulting is a specialist recruitment company within the Medical Devices, Scientific Engineering, Scientific Software, Robotics, Data Science, Healthcare Communications, Science, Electronics Design, New Product Design, Human Factors, Regulatory Affairs, Quality Assurance, and Field Service Engineering sectors.....Read more...
Planner Estimator
Location Dorset
Hours Full time
Salary £40,000-£50,000 per annum
We are recruiting a Planner Estimator for a growing precision engineering business in Dorset. As Planner Estimator, you will supply high-quality CNC machined components into aerospace, defence, marine and specialist industrial markets. The company values quality, efficiency and strong communication on the shop floor.
The Role of Planner Estimator
As Planner Estimator, you will manage the full workflow from enquiry to production release. Youll review drawings, generate quotes, load work into the MRP system and plan production. The ideal Planner Estimator has solid manufacturing knowledge, especially in CNC machining, materials, processes and machining times.
Key Responsibilities for the Planner Estimator
Estimating & Quoting
As Planner Estimator, pick up new enquiries and prepare accurate quotations
Review engineering drawings, BOMs and models as part of your Planner Estimator duties
Identify materials, processes, tolerances and required operations
Calculate cycle times, tooling requirements and costings
Liaise with suppliers for material and subcontract prices
Prepare commercial quotations and support customer queries
Planning & Workflow Coordination
As Planner Estimator, load confirmed jobs into the MRP system (Tricorn)
Create routings, works orders and capacity plans
Schedule work through machining, inspection and assembly
Review WIP and job progress, adjusting plans as the Planner Estimator
Provide clear manufacturing instructions to production
Contract Review & Project Support
Perform contract reviews for new orders to confirm scope, specs and commercial terms
Ensure all customer requirements and special processes are captured
Work alongside production, quality and machining teams to ensure job readiness
General Manufacturing Support
Communicate with shop-floor machinists regarding methods and timings
Support process improvements and efficiency initiatives
Assist in resolving material, drawing or data issues as the Planner Estimator
Required Skills & Experience for the Planner Estimator
Strong manufacturing knowledge from a precision engineering environment
Ability to read and interpret engineering drawings confidently
Understanding of materials (aluminium, stainless, titanium, plastics) and machining methods
Experience estimating or planning CNC machined components
Ability to calculate machining times and produce accurate cost estimates
Comfortable using MRP systems (Tricorn experience is a plus)
Good communication skills, youll be the Planner Estimator liaising across customer and shop-floor
Desirable for the Planner Estimator
Experience in aerospace, defence or other high-spec industries
Knowledge of inspection requirements and tight tolerances
Understanding of subcontract processes (anodising, heat-treatment, coatings)
Able to work in a small business environment where your Planner Estimator role will be flexible and hands-on
What Next?
Apply now or call Hayden at Holt Engineering on 07955 081 482 for more information on the Planner Estimator role.....Read more...
Service Engineer
Bristol
£32,000 - £35,000 Basic + Training + Job Satisfaction + Challenge + Stability + Family - Feel + Holiday + low staff turnover + Work life balanace
Solidify your career as a Service Engineer, where your passion for engineering and willingness to learn will be fully supported. This is a hands-on role offering comprehensive training, allowing you to grow into a true specialist while taking on new challenges that provide genuine job satisfaction. Continue building your skills to the best of your ability and advancing your career within a supportive and forward-thinking environment.This company is a global leader in the supply, service, and support of material handling equipment, including forklifts, warehouse trucks, and automated solutions. Due to continuous expansion and increasing customer demand, they are looking for a motivated Service Engineer to join their growing team. This is an excellent opportunity for someone who enjoys hands -on job satisfaction and wants to work with a stable, and well-established organisation.The Service Engineer Role Will Include: *Site based service position in the Bristol area *Service, repairs, PPMs, and breakdowns of material handling equipment * Occasional travel to nearby customer sites for urgent breakdowns
The Successful Service Engineer Will Have: *A background or experience in mechanics *Commutable to the Bristol area *Full UK driving licence
Please Apply or Call Rebecka on 07458163046 for Immediate Consideration.
Keywords: Service engineer, Field service engineer, trainee engineer, site service engineer, mechanical, mechanical fitter, installation engineer, field install engineer, service tech, service technician, electrical engineer, maintenance engineer, mobile engineer, appliance engineer, electromechanical engineer, Bristol, Bath, Weston-super-Mare, Yate, Clevedon, Portishead, Keynsham, Nailsea
This vacancy is being advertised by Future Engineering Recruitment Ltd. The services of Future Engineering Recruitment Ltd are that of an Employment Agency. Please visit our website at Future Engineering Recruitment to view other positions we are currently handling. Future Engineering Recruitment Ltd can only accept applications from candidates who have a valid legal permit or right to work in the United Kingdom. Potential candidates who do not have this right or permit, or are pending an application to obtain this right or permit, should not apply as your details will not be processed. We will endeavour to respond to all applicants; however due to the volume of responses, we can only guarantee that candidates who have been shortlisted will be contacted.....Read more...
Sales Engineer Midlands - Tamworth £50,000 - £52,000 Basic + Commission/Bonuses = OTE £75k- £78k + Car Allowance + Training + Opportunity To Run a Department + Market Leader + Training + BenefitsEarn a realistic £75,000 plus, working with market-leading products as a Sales Engineer. This is a fantastic opportunity to grow your career and the department as the company expands. This is a role where you’ll have full autonomy to manage your patch and approach your sales in the way you know delivers, and take your earnings and career to the next level.This global organisation manufactures and delivers a range of ventilation and environmental solutions. In this unique Sales Engineer position, your role will be split 50% to new business and 50% to service contracts and existing customers. Over time, you will be given the opportunity to lead the department as it grows, becoming a specialist and a leader in the business. Your role as a Sales Engineer will include: * New business and Account Management / Managing key accounts * Covering in and around the Midlands and UK-wide when required * Maximising sales opportunities with existing accountsThe successful Sales Engineer will need: * Technical engineering experience or knowledge (ideal) * Full clean driving licence * Experience in sales/account management / after-sales / service contracts or similar * Willing to travel on a planned schedule when requiredIf interested in this role, please apply or contact Ryan Powlett for immediate consideration.Keywords: Sales Manager, Account Manager, Sales Account Manager, Technical Sales, Technical Sales Engineer, Technical Sales Manager, Technical Business Development, Business Development Manager, Business Development, Field Sales Engineer, Business Development Executive, BDM, Sales Engineer, Sales Executive, Head of Sales, Technical Pre-sales Engineer, Proposals Engineer, Sales Consultant, Technical Sales Specialist, HVAC, Midlands, Birmingham, Coventry, Wolverhampton, Solihull, TamworthThis vacancy is being advertised by Future Engineering Recruitment Ltd. The services of Future Engineering Recruitment Ltd are that of an Employment Agency. Future Engineering Recruitment Ltd are that of an Employment Agency.Please visit our website to view other positions we are currently handling.Future Engineering Recruitment Ltd can only accept applications from candidates who have a valid legal permit or right to work in the United Kingdom. Potential candidates who do not have this right or permit or are pending an application to obtain this right or permit should not apply as your details will not be processed.....Read more...
Commissioning Engineer
Sittingbourne
£50,000 - £55,000 Basic + Annual Bonus + Constant Training + Private Health Insurance + Simply Health (cash back plan) + Life Insurance + Great Pension Scheme + International Travel and Stay Away
Work for a respected global manufacturer and supplier as a process & commissioning engineer where you’ll be treated like more than just another number! You’ll be part of a highly experienced team in a company that can offer continuous and constant training to make you a technical expert in a niche but specialist industry.
This growing company designs, manufactures and installs heavy industrial machinery such as crushing machines to the mineral industry worldwide. They supply to some of the largest organisations in the world and are best known for their unrivalled quality. Due to growth they are now looking to recruit a commissioning engineer to be part of their stable and experienced workforce long term.
Your Role as a Commissioning Engineer:
* Process & Commissioning Engineer role - Industrial engineering * Carry out heat calculations / fan sizes / chemical calculations and more * Liaise with customers to meet specifications * International travel to customer sites
As A Commissioning Engineer You Will Need To Have:
* Experience as a process / commissioning engineer or similar * A background of / knowledge of industrial engineering - steam / steel / mineral / cement or papermill experience would be beneficial * Ability to do international travel and stay away * Live commutable to Sittingbourne
Please apply or contact Georgia Daly on 07458163040 for immediate consideration
Keywords: process engineer, commissioning engineer, processing engineer, chemical engineer, project engineer, chemical, heat, steam, cement, papermill, steel, steel works, mineral processing, mineral, heavy industrial, manufacturer, Rochester, Medway, Sittingbourne Chatham, Crayford, Dartford, KentThis vacancy is being advertised by Future Engineering Recruitment Ltd. The services of Future Engineering Recruitment Ltd are that of an Employment Agency. Please visit our website to view other positions we are currently handling. Future Engineering Recruitment Ltd can only accept applications from candidates who have a valid legal permit or right to work in the United Kingdom. Potential candidates who do not have this right or permit, or are pending an application to obtain this right or permit should not apply as your details will not be processed. We will endeavour to respond to all applicants however due to the sheer volume of response, we can only guarantee that candidates who have been shortlisted will be contacted. ....Read more...
As part of your apprenticeship, you’ll study for the Level 4 Engineering Manufacturing Technician Apprenticeship Standard through Loughborough College. You’ll attend college one day per week during term time. Progress reviews with your college assessor and workplace mentor will take place every 12 weeks, with regular opportunities for feedback and development built in. Training:As part of your apprenticeship, you’ll study for the Level 4 Engineering Manufacturing Technician Apprenticeship Standard through Loughborough College. You’ll attend college one day per week during term time. Progress reviews with your college assessor and workplace mentor will take place every 12 weeks, with regular opportunities for feedback and development built in. Training Outcome:Once you complete the programme, you’ll be ready to move into a permanent role as a Mechanical Designer, with the skills, confidence and experience to make a valuable contribution from the outset. Upon programme completion, you can expect to earn a competitive salary exceeding £39,000. You’ll also have the opportunity to work toward professional registration, guided by a mentor from a UK engineering institution. From there, your development doesn’t stop. Through the Babcock Role Framework, you’ll have a clear view of how your career can progress, with mapped-out pathways, development opportunities and the tools you need to get wherever you want to go. Employer Description:Babcock is an international defence company providing support and product solutions to enhance our customers’ defence capabilities and critical assets. We provide through-life technical and engineering support for our customers’ assets, delivering improvements in performance, availability and programme cost. Our c27,700 employees deliver these critical services to defence and civil customers, including engineering support to naval, land, air and nuclear operations, frontline support, specialist training and asset management. We also design and manufacture a range of defence and civil specialist equipment, from naval ship and weapons handling systems to liquid gas handling systems. We also provide integrated, technology-enabled solutions to our defence customers in areas such as secure communications, electronic warfare and air defence.Working Hours :Monday to Friday
9am to 5pmSkills: Communication skills,Attention to detail,Team working....Read more...
Power Electronics Engineer
Location: Wickford, Essex (on-site, with some travel and occasional customer visits as required)
An excellent opportunity has arisen for an experienced Power Electronics Engineer to join a well-established UK power electronics manufacturer, specialising in the design and production of advanced power supply solutions. The company develops AC-DC and DC-DC power supplies, transformer rectifiers, configurable modular systems, high-voltage systems, and fully customised designs. Serving customers across aerospace, defence, industrial, telecoms, and emerging markets such as hydrogen production and carbon capture, the business is recognised for delivering innovative, bespoke, and reliable solutions in quality-critical sectors.
This role is ideal for a hands-on engineer with strong analogue electronics and power supply design experience, who enjoys solving complex technical challenges and working across the full product lifecycle — from concept, prototyping, and testing through to customer delivery. The position also offers the opportunity to work closely with the Engineering Director, gaining mentorship with a clear pathway to grow into a future leadership role.
Main Responsibilities of the Power Electronics Engineer (based in Wickford, Essex):
Design, develop, test, and troubleshoot power supply products (AC/DC, DC/DC, rectifiers, high-voltage systems).
Lead and manage engineering projects from concept through to completion, ensuring delivery to time, cost, and quality.
Collaborate with cross-functional teams, including production and supply chain, to ensure design intent is met.
Produce and maintain technical documentation including specifications, test procedures, and design records.
Support the sales teams with technical input to customer enquiries, proposals, and specifications.
Interface directly with customers on technical issues, projects, and RMAs, ensuring smooth resolution.
Drive research and innovation to enhance products, processes, and new technologies.
Mentor junior engineers and deliver technical training to internal staff and customers.
Requirements of the Power Electronics Engineer (based in Wickford, Essex):
Degree (or equivalent) in Electrical/Electronics Engineering (Master’s desirable).
Extensive experience in electronics engineering, including PCB design.
Strong background in analogue electronics and power supply design (AC/DC, DC/DC, rectifiers, high-voltage).
Proficiency in simulation and design tools such as SPICE and CAD software.
Practical, hands-on approach to prototyping, soldering, testing, and troubleshooting.
Excellent problem-solving, analytical, and communication skills.
Flexible, detail-oriented, and able to manage multiple projects in a small but dynamic team.
Full UK driving licence and legal right to work in the UK.
Desirable Experience:
Background in telecoms power supply design or other efficiency-critical markets.
Low-level programming knowledge and/or digital design alongside analogue expertise.
Commercial awareness of electronics product development and ability to support technical sales.
Experience in quality-critical sectors such as aerospace, defence, or industrial.
This is a key role within the engineering team, offering long-term development opportunities, including progression to Engineering Director.
To apply for this Power Electronics Engineer role based in Wickford, Essex, please send your CV to:
Kchandarana@redlinegroup.com or call 01582 878 830 / 07961 158 784....Read more...
HV Engineer – Solar, Microgrids & Heat Networks – UK Wide – Permanent
We’re supporting a rapidly growing renewable energy EPC as they scale up delivery of new solar farms, microgrid systems and district heating networks across the UK.
They’re now looking for an experienced HV Engineer to join their engineering team, supporting high-voltage system design, network integration and on-site delivery across multiple new-build projects.
The HV Engineer role will involve:
Overseeing high-voltage design activities, ensuring alignment with technical requirements, project specifications and contractual obligations
Reviewing Employer’s Requirements and technical documentation to support robust HV system design decisions
Coordinating with DNOs, substations, SCADA teams, PPC suppliers and other key interfaces to ensure safe and compliant system integration
Supporting procurement activities by reviewing technical solutions, cable specifications, switchgear selections and related HV equipment packages
Developing detailed HV engineering documentation including cable schedules, protection settings, single line diagrams, interface registers and commissioning documentation
Providing on-site HV expertise during installation, testing, energisation and commissioning phases
Ensuring all HV works meet UK regulations, industry standards and project-specific compliance requirements
Supporting safe systems of work, operational readiness and technical assurance from design through to handover
The successful HV Engineer will need:
Background in Electrical Engineering (degree or diploma preferred)
Strong understanding of HV systems, protection, switchgear and network architecture
Experience supporting or delivering HV works on solar farms, grid connections, substations or similar large-scale energy projects
Confident communicator able to collaborate with DNOs, EPC teams and external partners
Solid IT capability, including engineering tools and MS Office (Excel in particular)
....Read more...
Health and Safety Manager
Rochester
£65,000 - £80,000 Basic + Bonuses Discretionary + Training + Company Car + Family Feel Environment + Job Security + Holiday + Pension + IMMEDIATE START
Work for a highly reputable and stable specialist engineering contractor as a Health and Safety Manager where you’ll become a recognised and valued member of the organisation. You'll be joining a team of highly skilled professionals who pride themselves on quality of work and respect for everyone in the business, whilst getting a long term career and unparalleled job security.
This industry leading contractor are looking for a Health and Safety Manager to join their team covering the region. Have complete autonomy to make the role your own, be recognised as an expert in your field and truly make a difference influencing safety within the business. Long term you’ll experience respect, be trusted for your expertise and enjoy working for a company who’s are truly committed to improving their H&S practices.
Your role as a Health and Safety Manager will include:
* Inform Directors and Senior Managers of any foreseeable issues that may influence the HSEQ programme. * Coordinate, deliver, and provide guidance on HSEQ training * Carry out HSEQ audits and inspections, and conduct an annual management review. * Assist Senior management on Marine Projects The successful Health and Safety Manager will need:
* Health and safety manager background in construction, engineering or marine engineering * NEBOSH (Must Have) * Commutable around Kent * Full UK Drivers License and no criminal convictions
For immediate consideration please call Matthew on 07458163042 or click to apply
Keywords: Health and Safety manager, H&S, SHEQ Advisor, Marine engineering, Construction, Kent, Rochester, Dartford, Maidstone, Rainham, Romford, Sittingbourne, Sevenoaks....Read more...
Structures Manager
Glasgow
£60,000 - £90,000 + Career Progression + Technical Training + Chartership + Holidays + Pension + Immediate Start Available
Join a company looking to be the go-to one stop shop Civil Engineering Contractor in the infrastructure sector. As a Structures Manager, you will take full responsibility for projects across the central belt of Scotland. You’ll have the opportunity to to work on a variety of projects including Motorway Bridges, Underbridges, Piling and Culverts.
This is an exciting opportunity for a Structures Manager looking to demonstrate their skill and be rewarded with a clear path to senior leadership. Progression at this company will look like contracts manager upon successful completion of a project. You’ll be part of a growing company looking to take on the best staff and establish themselves as the best in the infrastructure industry. If you are looking to take a step forward into playing a crucial role as a Structures Managers supporting and growing a market leader, apply now! Your role as a Structures Manager will include:
*Plan, execute, and deliver infrastructure projects.*Ensure all project elements run on schedule and meet quality standards.*Identify and mitigate potential delays caused by supply chain or design lead times.*Collaborate with internal teams to drive projects to successful completion.As a Structures Manager you will need:
*Ambitious mindset and strong teamwork skills.
*Experience from the tools in Civil Engineering
*Strong technical ability and detail orientated.Please apply or call Sonny Lovett for more information on 07537153909 Keywords: Civil Engineering, Structures Manager, Project Manager, Project Management, Infrastructure, Bridges, Structures Manager, Civil Engineering, Structural Works, Bridge Construction, Concrete Structures, Reinforced Concrete, Structural Steel, Temporary Works, Permanent Works, RC Frame, Scotland Central Belt, Edinburgh, Glasgow, Livingston, Scotland Central Belt....Read more...
Im supporting a well-established engineering business in Dorset who are looking to bring in a Principal Electrical Engineer to lead the design and integration of complex electrical systems used across advanced maritime and autonomous technology.
This is a technical leadership role with real variety from distributed data acquisition systems and control solutions, through to electrical architectures for autonomous platforms and underwater systems. If you enjoy solving difficult engineering challenges and guiding a high-calibre team, this will be a great fit.
What youll be doing:
- Leading the design and development of electrical systems for complex engineering products
- Defining system architectures, component selections, power distribution schemes, and control strategies
- Producing and reviewing electrical schematics, wiring diagrams, cable assemblies, and design documentation
- Ensuring designs meet CE/UKCA, EMC, electrical safety and relevant regulatory standards
- Supporting system integration, testing, and commissioning activities
- Working closely with mechanical, software, and systems engineers to deliver fully integrated solutions
- Overseeing design reviews and ensuring technical accuracy across all outputs
- Mentoring and developing junior engineers to strengthen capability within the team
- Working with suppliers and customers to resolve technical challenges and ensure robust delivery
What Im looking for:
- Degree-qualified Electrical Engineer or similar
- Strong understanding of electrical design principles, power distribution, safety and system integration
- Experience working with electrical CAD tools
- Knowledge of CE/UKCA directives, EMC, electrical safety, and compliance requirements
- Ability to design for manufacturability, testability, and long-term reliability
- Familiarity with PLCs, motor control, industrial automation or maritime systems is a bonus
- Confident communicator with the ability to influence and lead technical discussions
- Comfortable working in a dynamic environment, managing multiple priorities
Why this opportunity stands out
Youll be involved in genuinely interesting engineering systems that operate above and underwater, autonomous technologies, advanced control architectures, and high-integrity electrical design. The role mixes hands-on technical work with leadership, innovation, and cross-disciplinary collaboration.
How to Apply
Interested? Id love to tell you more about this role call Ian Broadhurst on 07734406996 or drop me a message at ian.broadhurst@holtengineering.co.uk.....Read more...
Lead Electrical & Electronics Engineer – Contract£40–£45 p/h | Outside IR35 | Initial 3-month contractRingwood
An innovative engineering manufacturer is seeking an experienced Lead Electrical & Electronics Engineer to support their product design team on a contract basis. You’ll take a technical lead role across electrical and electronic design for complex educational and industrial technology products used worldwide.
In this hands-on position, you’ll guide a small electronics team while working across the full product lifecycle — from concept and schematics to PCB/PCBA work, component selection, integration of motors, pumps, heaters, and embedded systems, as well as fault-finding down to component level. Experience with PLCs, HMIs, microcontrollers, and electrical systems up to ~10kW is highly valuable.
What you’ll be doing:
Leading electrical & electronic design for new and legacy products
Diagnosing and improving PCBAs at component level
Creating electrical schematics and integrating mechanical/electromechanical systems
Selecting components and suppliers, balancing cost, performance & reliability
Supporting product compliance, documentation, testing and design reviews
Collaborating closely with engineering, projects, and manufacturing teams
What you’ll need:
Strong background in electrical/electronic engineering (degree-qualified)
Proficiency with ECAD tools (SolidWorks Electrical, ePlan, PCB design software)
Solid understanding of product safety directives (Machinery, LVD)
Project leadership experience and ability to manage multiple design workflows
A methodical, detail-driven engineering mindset
This is a great opportunity to step into a highly varied, technically rich role within a small, collaborative team working on globally-used products.
Immediate start available — apply now to discuss the contract in detail.....Read more...
Field Service Engineer
York
£43,000 – £45,000 Basic + Stability + Job satisfaction + Secure, Growing Business + Holidays + Benefits Package + Pension + Tight Knit Team + Training + Low staff turnover
Are you seeking a diverse Field Service Engineer role that provides long-term stability and security? Join a highly skilled team of like-minded professionals and become part of a family-run business where your work is genuinely trusted, respected, and appreciated.
This industry-leading organisation is well established, highly regarded, and recognised as a frontrunner within its sector. Due to ongoing expansion, they now require an additional Field Service Engineer to support operations across two sites.
The Field Service Role Will Include: * Planned and Reactive Maintenance * Mechanical Fault Finding And Maintenance (Conveyors, Hydraulics, Pneumatics, PLCs) * Field Service Role In The Yorkshire Area
The Successful Field Service Engineer Will Have: * Previous mechanical background (motors, gearboxes, pumps) * Background working with automated equipment or in manufacturing is desired * Basic electrical understanding * Full Driving Licence
Keywords: mechanical maintenance engineer, maintenance, fitter, engineering, factory, manufacturing, FMCG, industrial, maintenance fitter, mechanical maintenance fitter, plastics, mech elec engineer, mechanical engineer, electrical engineer, York,Yorkshire,Leeds,Bradford,Headingley,Mirfeld,Huddersfield,Harrogate,Halifax,Holgate
This vacancy is being advertised by Future Engineering Recruitment Ltd. The services of Future Engineering Recruitment Ltd are those of an Employment Agency. Please visit our website to view our full range of vacancies.
Future Engineering Recruitment Ltd can only accept applications from candidates who have a valid legal permit or right to work in the United Kingdom. Applicants who do not have this right, or are awaiting approval for it, should not apply as their details will not be processed.
We aim to respond to all applicants; however, due to the high volume of applications, only shortlisted candidates can be guaranteed a response.....Read more...
As an apprentice, you’ll work at a company and get hands-on experience. You’ll gain new skills and work alongside experienced staff.
What you’ll do at work:
If you have an interest in welding, fabrication & engineering, you will receive training in how to:
Use fabrication & welding equipment
Read engineering drawings
Identify the different materials used in our processes
Understand general mechanical engineering needed to assemble our machinery
The role isn’t always limited to the workshop, once enough experience has been gained there will be installations on various sites around the UK and even abroad.Training:
The Level 3 Metal Fabricator Apprenticeship is primarily delivered in the workplace with 1 day a week college attendance for the three and a half years
You will work towards gaining a Level 3 Metal Fabricator Apprenticeship Standard, as well as a Level 3 Diploma in Advanced Manufacturing Engineering (Development Knowledge)
Training Outcome:
Upon successful completion of your apprenticeship, you will continue employment with us
Employer Description:Fabcon Food Systems has a clear vision to become a leading supplier of innovative, reliable and cost-effective food processing & handling equipment. We focus on expanding organically & through strategic partnerships, recognising the importance of consistently exceeding the expectations of our employees, customers, suppliers and our partnersWorking Hours :Variable start and finish times between the hours of 7.00am and 4.30pm. Typical working week is 7.00am - 3.30pm.Skills: Communication skills,Attention to detail,Organisation skills,Problem solving skills,Number skills,Team working,Initiative,Non judgemental,Patience,Physical fitness,Driving Licence....Read more...
- Observe, learn and apply a wide range of engineering skills and processes under supervision.- Support New Product Introduction projects and understand product development from concept to implementation.- Maintain workshop equipment, ensure good housekeeping, and record progress in a logbook.Training:- Complete a structured advanced apprenticeship programme combining on-the-job training with academic study.- Attend suitable practical and theoretical courses to achieve required qualifications.- Receive mentoring and guidance from experienced engineers and technical staff.Training Outcome:Working as a member of our Process Engineering TeamEmployer Description:This apprenticeship offers an excellent opportunity to gain hands-on engineering experience and a nationally recognised qualification. However, it requires commitment and hard work. You will need to balance practical training with academic study, complete coursework alongside your day-to-day responsibilities, and demonstrate progress each year. Consistent effort is essential, as failure to complete the programme may affect your continued employmentWorking Hours :8am - 4pm Mon - Thurs, 8am - 1pm FridaysSkills: Communication skills,Attention to detail,Organisation skills,Problem solving skills,Number skills,Logical,Team working,Initiative,Patience....Read more...
