Electronic Jobs Found 463 Jobs, Page 19 of 19 Pages Sort by:
Instrumentation Engineer
Catfoss Recruitment Ltd are currently in partnership with a globally respected R&D company that is looking to recruit am Instrumentation Engineer to their expanding team on a permanent basis.We are seeking to recruit an Instrumentation Engineer whose primary function will be to manufacture and install instrumentation for use within our R&D testing facilities. This will include but is not limited to; equipment calibration, the set-up of specialised measurement/monitoring equipment, model assembly and integration for test, troubleshooting and assisting in the operation of facilities.The successful candidate will be expected to demonstrate the drive and commitment necessary for ensuring that work is completed in line with challenging schedule requirements whilst maintaining a clean, safe working environment. To succeed in this position, you must be flexible in your approach to working hours, which will require shift working, and able to respond quickly to a changing workload.Instrumentation Engineer - Working hours: Mon – Fri, Full time, 40 hours per week, shift work required when testing facilities in operation (typical hours are 07.00 – 15:00 and 14.00 – 22:00 on a rotating weekly basis) office hours otherwiseInstrumentation Engineer - Main duties and responsibilities will include: -• Manufacture of bespoke wiring looms and assemblies with reference to circuit drawings / wiring lists.• Hand soldering of fine components at the work-bench and on test models.• Miniature strain-gauge installation and wiring.• Calibration, maintenance, testing and fault-finding of sensors, signal conditioning and data acquisition systems down to component level.• Specify required instrumentation from customer specification.• Support the design and integration of instrumentation into customer models and rigs.• Work as part of a team, involved in the preparation and assembly of models and rigs for testing to defined quality standards, giving consideration to schedule and costs;• Provide instrumentation support for projects in all of company test facilities.• Assist in the operation of company test facilities.• Maintenance of the instrumentation hardware and records.• Preparation and installation of specialist optical measurement systems in test facilities;• Making recommendations for design, process or hardware modifications to support continuous improvement within the department.• General departmental duties such as record maintenance, model storage, organization of equipment, rig maintenance,• Perform tasks with conformance to company Health & Safety Policy and Quality Standards.• Ability to work in confined spaces and at heights.• Flexible approach to shift working patterns & overtime as required.• Undertaking training, where necessary, in support of the above duties, to ensure that safe working practices are observedTraining will be given in all of the specialist activities associated with this position.Instrumentation Engineer - Qualifications & ExperienceThe successful candidate will be an experienced time served technician, preferably educated to HNC/HND Electrical and Electronic Engineering level (or equivalent) with experience of working in an R&D and/or commercial environment.This is an exciting permanent opportunity for the right person to be part of a successful and highly skilled engineering company. In return, we offer a range of benefits including: a competitive salary and pension scheme; free parking; employee assistance programme; optional sharesave scheme, private health insurance and 26 days’ annual leave plus Bank Holidays (increasing with length of service after 5 years’ service)Instrumentation Engineer previous suitable job titles: Instrumentation Technician, C&I Technician, EC&I Technician, Controls Technician etc… Commutable from Bedford, St Neots, Milton Keynes, Northampton, Wellingborough, Biggleswade etc...The successful candidate must satisfy security clearance requirements – including the last 5 years continual UK residency.Please apply ASAP ....Read more...
Maintenance Mechanic Days
JOB DESCRIPTION As our Mechanic Operator you are responsible for both the maintenance and operation of filling and packaging equipment. Additionally provide assistance and support to the Maintenance Mechanic in making repairs throughout the plant. Solving challenges is the very foundation of who we are. After all, in the beginning, our founder, sea captain Robert Fergusson, didn't particularly care about paint. When he founded our company in 1921, he just wanted to keep his ship intact and stumbled upon a valuable solution. Today, that discovery is Rust-Oleum Corporation. The same passion that drove the Captain to spend his next few years creating the world's first rust-preventative paint still drives us today. When we see a problem, we work diligently until we've perfected a solution, which has led to some of the most cutting edge, durable and innovative products in the industry. Our creative and talented team of over 2000 people across every corner of the world, help us remain the global leader in protective paints and coatings for both home and industry. Here's what you can expect every day: The primary responsibility is to operate the filling line to meet the production schedule. Secondarily, the employee will be required to change over and repair line equipment as needed. Restock supplies and components on filling line as needed to support production. Perform quality checks and inspections as necessary. Document various production data; including downtime, production rate, and issues. Repair or replace defective equipment parts, using hand tools and power tools, and reassemble equipment Perform routine preventive maintenance to ensure that machines continue to run smoothly, building systems operate efficiently, or the physical condition of buildings does not deteriorate. Inspecting drives, motors, and belts, checking fluid levels, replacing filters, or performing other maintenance actions, following checklists. Using tools ranging from common hand and power tools, such as hammers, hoists, saws, drills, and wrenches, to precision measuring instruments and electrical and electronic testing devices. Assemble, install, or repair: wiring, piping, machinery, and equipment. Clean and lubricate shafts, bearings, gears, and other parts of machinery. Diagnose mechanical problems and determining how to correct them, utilizing repair manuals and parts catalogs as necessary. Required Experience: High school graduate or equivalent. 1-3 years of industrial experience. Experience with filling and packaging equipment. Knowledge of machines and tools, including their designs, uses, repair, and maintenance. Ability to read and follow standard operating procedures. Ability to do basic math and enter computer data. Ability to coordinate with the work of others and solve problems in a team environment. Active participation in our Continuous Improvement Process. Ability to lift 75 pounds. Willingness to work overtime as required. Additional Consideration Given to Those With: Exposure to quality programs. Paint/Coatings/chemical industry knowledge or experience. Experience with a continuous process discipline such as Six Sigma/Lean/TQM manufacturing environment. Previous experience with safety programs. Job Type: Full-time Schedule: 12 hour shiftOvernight shift Pay: Up to $42.68 per hour Work Location: 8105 95th Street | Pleasant Prairie, WI 53158 Benefits: 401(k)Dental insuranceHealth insurancePaid time offReferral programVision insurance Rust-Oleum is an equal opportunity employer. Employment selection and related decisions are made without regard to sex, race, age, disability, religion, national origin, color, or any other protected class.Apply for this ad Online! ....Read more...
Apprentice Service Advisor
Key accountability & responsibilities will include: To work as part of a team delivering a first class, professional customer service, ensuring that where possible, customer enquiries, payments and complaints are resolved at the first point of contact To greet customers in a friendly, professional and courteous manner To work within established procedures for each service request including logging, processing and progress chasing enquiries, adhering to service level agreements and quality standards to maximise customer satisfaction To maintain electronic and written records of letters and forms received, information given, services requested and complaints made, to ensure accuracy of information and efficiency when dealing with customers In conjunction with service advisor/senior service advisor, to encourage feedback on services provided and recognise the changing needs of the service and make recommendations to the service manager/depot manager for service improvement To undertake general administrative duties to ensure the smooth flow of work within the customer service reception To assist the service advisor/senior service advisor to give repair estimates and price quotations and offer repair suggestions To obtain customer authorisation and order numbers Training:Level 3 Business Administrator Apprenticeship Standard. This apprenticeship programme is delivered with a blended learning approach and includes a mixture of onsite tutor visits and online tutor led sessions. All delivery is completed in the workplace, and you will not need to attend any off-site training. Training Outcome: This is a fantastic opening to gain potential permanent employment in a varied and ever-expanding industry. Ford and Slater have an enviable reputation for well-trained, high-quality staff and this is a career opportunity not to be missed. Employer Description:The company was founded in 1928 and has a distinguished history as a franchised commercial vehicle dealer. Ford & Slater was acquired by Peter Strevens in 1991 and the Directors of Ford & Slater comprise Strevens family members and other senior managers. Certain key milestones in recent years include the following: • Over £10 million invested in new dealerships in the last ten years • Eleven dealerships across the East Midlands and East of England, over 525 employees • Seven ATFs across the group • Winner of the Motor Transport Apprenticeship of the Year Award in 2018 • Winner of the PACCAR Financial International Dealer of the Year in 2018 • Noden Truck Centre was acquired in January 2019 • Winner of Retail Sales of the Year in 2018 • Winner of DAF's International Dealer of the Year 2020 As a privately-owned company we take a long-term view. The Company owns the majority of its dealerships, profits have been re-invested since 1991 and security of employment is very important. Our Mission Statement is to exceed our customer’s expectations by offering high quality transport services in an ethical manner at competitive prices. We will achieve this by utilising the synergies within our dealership group, offering innovative solutions and a “one-stop shop” provided by highly motivated and skilled long-term employees, reinvesting profits to provide modern, safe premises. DAF Trucks is our only truck manufacturer relationship, consequently our interests are wholly aligned with DAF Trucks unlike other dealers with competing manufacturer relationships. DAF Trucks is a subsidiary of PACCAR Inc, the worldwide quality leader in the design and manufacture of premium light, medium and heavy-duty commercial vehicles.Working Hours :Days and shifts to be confirmed.Skills: Communication skills,Attention to detail,Organisation skills,Customer care skills,Team working,Initiative,Patience ....Read more...
Engineering Apprentice - Worcestershire
HWGTA are recruiting Engineering Apprentices for local Engineering Companies. Working in partnership with a range of companies. We are currently recruiting for opportunities in a variety of disciplines, including: Multi-skilled Maintenance- Installing machinery and advanced equipment. Fault finding, testing and monitoring. Repairing and replacing components. Ongoing improvement and preventative maintenance planning. Machining/ CNC- Manufacture using own initiative and design or interpret customer requirement. Understand and use a variety of hand and machine tools. Produce diagrams and programmes confirming to British and International standards and to customer specifications. Modify and control CNC (Computer Numerical Controlled) programmes. Toolmaker- Manufacture using own initiative and design or interpret customer requirement. Understand and use a variety of hand and machine tools. Produce diagrams and programmes confirming to British and International standards and to customer specifications. Technical Support-Working to meet customer specifications. Understand methods for designing projects. Analyse designs against the brief. Produce detailed design drawings Product Design- Establish areas for improvement. Review quality and efficiency of existing products and processes. Demonstrate benefits of proposals, including costings. Work with the customer and productions teams. Production Engineering/ Fitting Read and interpret drawings and specifications. Inspect wiring installations, mechanical assemblies and electronic circuits. Adjust, repair and correct defects. Test product to ensure conformance to specifications. Welder/ Fabricator- setting and operating welding equipment and machinery. Completing inspections to ensure compliance to national standards for weld quality. Understanding and producing a variety of welded joints Preparing materials ready to join by cutting, bending and folding.Training:Your training course: Engineering technician (level 3) Your training plan: Formal training is delivered at HWGTA, located in located in Worcester (WR4 9GN): Duration approximately 40-45 months. Year 1 includes 26-42 weeks off the job training to cover practical and theory aspects Year 2 would include 1 day per week to complete EAL Level 3 Diploma in Advanced Manufacturing Engineering - Development Knowledge Years 2,3&4 will be based in company developing skills in preparation for the end point assessment to gain your Engineering Technician level 3 qualification. You will receive monthly visits from your assigned Learning and Development Specialist, who will set you work, monitor your development and wellbeing, and discuss training sessions. They will also prepare you for your End Point Assessment. Your main apprenticeship qualification may differ depending on agreed pathway with employer. Additional training for functional skills in English and Maths will be undertaken if needed unless required/ stated by employer. There is also a five-day teambuilding residential trip that is held in the spring of each year offered to all apprentices on programme.Training Outcome:On successful completion of the four year programme, a full time position could be offered by the employing company.Employer Description:Herefordshire and Worcestershire Group Training Association (HWGTA) is an employer led, not for profit training provider offering bespoke apprenticeships and training to local businesses and communities. HWGTA has over 50 years of experience in delivering excellent training across the two counties, consistently rating above the national average for learner success rates, holding “Outstanding” grading from Ofsted and maintaining successful, long-term relationships with local employers.Working Hours :Mon - Thurs 8:30 - 16:30, Fri 8:30 - 15:15 whilst at the training providerSkills: Communication skills,Attention to detail,Problem solving skills,Number skills,Logical,Team working,Creative,Initiative ....Read more...
Consultant Psychiatrist - Male PICU
An outstanding new job opportunity has arisen for a committed Consultant Psychiatrist - Male PICU to work in an exceptional hospital based in the Edgbaston, Birmingham area. You will be working for one of UK's leading health care providers This hospital provides fast access to expert treatment for a range of mental health difficulties, including addictions, depression, anxiety, and stress **To be considered for this position you must hold a CCST/CCT or equivalent in the Child and Adolescent Psychiatry with a valid GMC registration** As the Consultant Psychiatrist your key responsibilities include: RC responsibility for all patients Safe prescribing and monitoring of physical health Comprehensive Assessments and treatment planning with patients external share holders and carers Management of patients on the ward including physical health, mental state and risk management and formulation Adhering to organisational admission and discharge policy and procedures Timely discharge GP notifications and discharge summaries Preparation of Mental Health Act tribunal reports Must have proficient IT skills as prompt entry onto the electronic care record is essential Engagement with external professionals and families/carers Participation in audit, research, quality and performance management and other clinical and professional activities The following skills and experience are preferred and beneficial for the role: Previous Consultancy experience is desirable but not essential You will fulfil the role of Responsible/Approved Clinician to patients and experience of working in inpatient settings with people with significant mental health difficulties Evidence of post registration continuing professional development A positive attitude and commitment to change, improvement and quality Excellent verbal, interpersonal and written communication skills Excellent knowledge of the Mental Health Act and Code of Practice The successful Consultant Psychiatrist will receive an amazing salary of £160,000 - £165,000 per annum. This exciting position is a permanent full time role working 37.5 hours a week. In return for your hard work and commitment you will receive the following generous benefits: A dedicated speciality doctor to support your clinical duties The site also has a Junior Doctor/RMO rota based on site. They cover out of hour period and are occasionally available to support the team during the day Generous annual leave entitlement and study leave to attend CPD opportunities, conferences etc An extra days holiday to have your birthday off Meal from the hospital canteen at very affordable rates There will be opportunity for career development within the company healthcare network You will be well supported within your role, with a strong focus on continuing professional development Opportunities to take a lead role within the hospital – eg. medicines management/safeguarding Access to funded CPD courses relevant to the role Support from a managers on call system (on call Manager and Senior Manager) out of hours Extensive training through our online academy as well as face-to-face training Access to a pooled wellbeing fund, which is used to improve health and wellbeing of the team Access to kitchen with free hot and cold drinks and fruit Our independent Employee Assistant Programme can offer confidential emotional and practical support and advice to colleagues, 24/7 Company pension scheme Reference ID: 1620 To apply for this fantastic job role, please call on 0121 638 0567 or send your CV ....Read more...
Financial Services Apprentice (Generali UK)
Indexing of the departments incoming emails via the dedicated workflow tool. Creation of electronic folders and files for incoming quotations. Initial screening of company information in order to meet Customer Due Diligence requirements. Input of initial quote information within the pricing system. Identifying and requesting further information where required. Issue declinatures where quotes are not being proceeded with. Corresponding with intermediaries and regional offices with regard to the progress of quotations. Follow up on issued quotations to gain and circulate feedback on terms and enhance take -up rates. Time will also be made available during the apprenticeship to work alongside the Technical Support Executives and Underwriters in order to gain an overview of the roles undertaken by the department as a whole. Lifetime Partner Behaviours Ownership Acts with proactivity and passion for excellent performance. We are empowered people who take responsibility, make an impact and achieve excellent results, ensuring individual and Group growth. Simplification Makes things simple, adapts quickly and takes smart decisions. We take decisions making things simpler, smarter and faster to find solutions with flexibility. Human Touch Partners with others, showing empathy and team spirit. We care about people and we work in a spirit of trust, dialogue and mutual respect bringing a human touch to everything we do. Innovation Embraces differences to make innovation happen. We are an open network of diverse and inclusive individuals who share knowledge, think creatively and innovate to create a better future. Job Related Competencies Dependability Makes and fulfills commitments. Has established a pattern of working independently, meeting reasonable deadlines, and accepting responsibility for his or her actions. Willingly makes promises and fully intends to keep them. Arrives at work on time and ready to contribute. Shows up for meetings well-prepared. Work Ethic Is keenly aware of the time frame in which tasks or projects need to be done. Accepts and mirrors the level of urgency conveyed by manager or customer being served. Puts first priority on the needs of the organization or the needs of its customers. Quality of Work Has established a track record of producing work that is highly accurate, demonstrates attention to detail and reflects well on the organization. Is personally committed to high quality work and encourages others to have similar standards. Quantity of Work Produces an amount of work that meets or exceeds job expectations. Makes sure that quality does not suffer as the quantity of work increases. Works effectively with peers and carries own share of team workload. Time management Prioritizes tasks and manages time to ensure that deadlines are met. Plans his or her time and sticks to those plans. Prevents or manages interruptions until the highest priority tasks are accomplished. Managing Multiple Priorities Handles multiple assignments and priorities yet still fulfills all commitments. Readily accepts new responsibilities and adapts well to changes in procedures. Gives appropriate priorities to various work demands. Results Oriented Achieves results within established timelines. Understands and demonstrates that intentions, activities and results are not the same. Expects that obstacles will occur and refuses to use them as an excuse for not achieving results.Training Outcome:Potential for a full time role on completion of the apprenticeship.Employer Description:Generali in the UK provides a full range of corporate insurance solutions and services for multinational employers. Providing customers with flexible, innovative and technically effective insurance solutions lies at the very heart of our business for over 180 years. Our long history is founded on building trusted partnerships with the Corporate and Commercial business community worldwide, through our continuous development, long-term customer engagement and delivering excellence in an ever-changing marketplace.Working Hours :Monday to Friday. Shifts to be confirmed.Skills: Organisation skills,Team working,Excellent communication skills,Excellent written skills,Self motivation,Ability to cope with deadlines,Able to work under pressure,Proficient in Microsoft Office ....Read more...
Production Engineer
Technical Sales and Project EngineerRochdaleMonday-Thursday8am-5pmFriday8am-1pm£35,000-£45,000My Client, is a leading manufacturer within their field is seeking an experienced Production Engineer to join their team to assist with their growth and expansion.Reporting into the Head of sales, this role will play a pivotal part to business growth assisting the business with new enquires and existing projects.Technical Sales and Project Engineer RequirementsQualifications/experience required Experience working in a similar role within in a manufacturing environment is essentialExperience in using CAD packages is essential. (Ideally Powershape, Fusion 360 or Autodesk)Experience working with manufacturing ERP systems is essential.Experience of working to and meeting ISO9001requirements or equivalent is essential.Experience within a Commercial /Technical Sales environment would be advantageousKnowledge of Plastics and Moulding / Added value is highly advantageousExperience in process improvement and/or continuous improvement would be advantageous.Full UK Driving License Technical Sales and Project Engineer:Role responsibilities Assist the Technical Sales Team in the provision of costs/prices on both existing products and new projects.Ensure the provision of full, detailed and accurate specifications to assist in the establishment of relevant Processes and Procedures by Engineering/Production.Liaise, where necessary, with Customers and Suppliers to provide relevant information to enable efficient project implementation.Assist in the evaluation of quoted prices for customer products vs actual costs in Production.Co-ordinate and liaise with other associated departments, namely Production, Engineering, Quality, Purchasing, and Sales in respect of project administration.Work with Production and Quality departments to drive improvements in the process for existing customer products.Manage samples process both internally and to customers.Ensure strict control of all relevant project documentation and electronic data files. This an exciting opportunity to join a well-established family business with ambitious growth plans.This role would suit an experienced Manufacturing engineer, Project Engineer or Sales Engineer/Estimator looking for their next steps.The company would also consider candidates with relevant experience who are looking to take the next steps in their career.Keywords: Project Engineer, Sales Engineer, Manufacturing Engineer, Sales EstimatorWinsearch acts as an employment agency for permanent staff. We recruit for roles based in Engineering & Manufacturing, Food & Drinks, Pharmaceutical, Supply Chain & Procurement and Professional Services. View our latest jobs today on our website http://www.winsearch.uk and follow us on LinkedIn.ManH Our clients and their customers come from diverse backgrounds and so do we. We hire our people from various walks of life, each of whom make our company stronger with their talent, uniqueness, and expertise. This is what makes our company special; if you want to help us grow and take this ethos to our clients, then we cannot wait to collaborate with you! The UK has now left the European Union. Any EU, EEA or Swiss citizens living in the UK that wish to remain in the UK post Brexit need to apply to the EU Settlement Scheme. Although the closing date for applications was 30th Jun 2021, if you have not yet applied but believe that you would qualify under the EU Settlement Scheme, the Home Office have confirmed that they will consider late applications. For further information please see https://www.gov.uk/browse/visas-immigration/eu-eea-swiss Many Thanks ....Read more...
Electronic Repair Technician
Electronic Repair Technician Slough – Berkshire £££ Competitive doePermanent, Full Time: 08:00 – 16:30 Mon to Thurs 15:30 finish on Fridays ****Own transport and full driving licence essential due to the nature of this role ****Benefits:• Competitive Salary (sorry, our client does not want us to advertise this but we’ll tell you as soon as you call/email for further info) • Great place to work• 2 x standard contributory pension• Good career progression • Free ParkingAbout the RoleLooking for a chance to join a dynamic team? We need someone to repair and overhaul a wide range of aircraft communications, navigation, radar, radio audio units, recorders, and instruments to component level. You'll work with everything from analogue electronics to complex microprocessor electronics and RF circuits.What You'll Be Doing• Mechanical & Electronics Repair: Get hands-on with precise mechanical work and electronics repair, including through-hole and surface-mounted components.• Fault Finding & Testing: Use specialised and general-purpose test equipment to complete fault finding, repairs, and testing.• Regulatory Compliance: Follow the manufacturer's component maintenance manual and company’s quality system.• Record Keeping: Keep accurate and legible repair records and file them on time.• Quality & Safety: Maintain agreed levels of quality and cost-effectiveness, ensuring accuracy and safety standards are met.• Continuous Learning: Stay updated with company working practices and procedures.• Cross-Training: Learn other technical areas to meet business needs.• Quantum System Utilisation: Use the Quantum system to ensure effective delivery.Standard Responsibilities• Standard Operating Procedures: Understand and apply SOPs in all tasks.• Health & Safety Compliance: Follow health and safety requirements at all times.• Regulatory Compliance: Ensure compliance with regulatory bodies’ requirements.• Issue Reporting: Bring any issues that could affect the business to your manager’s attention.• Policy Adherence: Follow all company policies and procedures.What We Need from You• Driving Licence: A full driving licence is essential.• Relevant Degree/Diploma: A degree or diploma in Aircraft Engineering or Aeronautical/Aerospace Engineering Technology or equivelent.• EASA 145 Experience: Experience working in an EASA 145 maintenance organisation and a solid understanding of the regulations.• Component Maintenance Knowledge: Good grasp of aircraft component maintenance principles and avionic systems.• Quality Management: Comprehensive knowledge of quality, health & safety, and environmental management.• Communication & Leadership: Proven ability to communicate effectively, lead initiatives, and drive improvements.• ISO9001:2015/AS9100/AS9110 Experience: Experience with internal/external auditing.• Interpersonal Skills: Excellent interpersonal skills with the ability to build strong relationships with outside agencies.• Analytical & Organisational Skills: Strong analytical, administrative, and organisational skills with great attention to detail.• Innovation & Enthusiasm: Demonstrates innovative thinking and enthusiasm.• Pressure Handling: Ability to work under pressure, meet tight deadlines, and multitask.• Strong Communication: Excellent verbal and written communication skills.• Ownership & Independence: Takes ownership and works effectively with minimal supervision post-probation.• Security Clearance: Due to the nature of the business, security clearance will be required.For further details or to apply, please contact Jane Step into a challenging and rewarding role in aviation!Westin Par values diversity and promotes equality. No terminology in this advert is intended to discriminate against any of the protected characteristics that fall under the Equality Act 2010. Candidates must be eligible to live and work in the UK. For the purposes of the Conduct Regulations 2003, when advertising permanent vacancies, we are acting as an Employment Agency Due to the high volume of applicants applying for all roles, we can only reply to candidates with the most relevant skills and experience. If you have not heard back from us within 48 hours of your application, please assume that you have been unsuccessful on this occasion. ....Read more...
Electronic Repair Technician
Electronic Repair Technician Slough – Berkshire £££ Competitive doePermanent, Full Time: 08:00 – 16:30 Mon to Thurs 15:30 finish on Fridays ****Own transport and full driving licence essential due to the nature of this role ****Benefits:• Competitive Salary (sorry, our client does not want us to advertise this but we’ll tell you as soon as you call/email for further info) • Great place to work• 2 x standard contributory pension• Good career progression • Free ParkingAbout the RoleLooking for a chance to join a dynamic team? We need someone to repair and overhaul a wide range of aircraft communications, navigation, radar, radio audio units, recorders, and instruments to component level. You'll work with everything from analogue electronics to complex microprocessor electronics and RF circuits.What You'll Be Doing• Mechanical & Electronics Repair: Get hands-on with precise mechanical work and electronics repair, including through-hole and surface-mounted components.• Fault Finding & Testing: Use specialised and general-purpose test equipment to complete fault finding, repairs, and testing.• Regulatory Compliance: Follow the manufacturer's component maintenance manual and company’s quality system.• Record Keeping: Keep accurate and legible repair records and file them on time.• Quality & Safety: Maintain agreed levels of quality and cost-effectiveness, ensuring accuracy and safety standards are met.• Continuous Learning: Stay updated with company working practices and procedures.• Cross-Training: Learn other technical areas to meet business needs.• Quantum System Utilisation: Use the Quantum system to ensure effective delivery.Standard Responsibilities• Standard Operating Procedures: Understand and apply SOPs in all tasks.• Health & Safety Compliance: Follow health and safety requirements at all times.• Regulatory Compliance: Ensure compliance with regulatory bodies’ requirements.• Issue Reporting: Bring any issues that could affect the business to your manager’s attention.• Policy Adherence: Follow all company policies and procedures.What We Need from You• Driving Licence: A full driving licence is essential.• Relevant Degree/Diploma: A degree or diploma in Aircraft Engineering or Aeronautical/Aerospace Engineering Technology or equivelent.• EASA 145 Experience: Experience working in an EASA 145 maintenance organisation and a solid understanding of the regulations.• Component Maintenance Knowledge: Good grasp of aircraft component maintenance principles and avionic systems.• Quality Management: Comprehensive knowledge of quality, health & safety, and environmental management.• Communication & Leadership: Proven ability to communicate effectively, lead initiatives, and drive improvements.• ISO9001:2015/AS9100/AS9110 Experience: Experience with internal/external auditing.• Interpersonal Skills: Excellent interpersonal skills with the ability to build strong relationships with outside agencies.• Analytical & Organisational Skills: Strong analytical, administrative, and organisational skills with great attention to detail.• Innovation & Enthusiasm: Demonstrates innovative thinking and enthusiasm.• Pressure Handling: Ability to work under pressure, meet tight deadlines, and multitask.• Strong Communication: Excellent verbal and written communication skills.• Ownership & Independence: Takes ownership and works effectively with minimal supervision post-probation.• Security Clearance: Due to the nature of the business, security clearance will be required.For further details or to apply, please contact Jane Step into a challenging and rewarding role in aviation!Westin Par values diversity and promotes equality. No terminology in this advert is intended to discriminate against any of the protected characteristics that fall under the Equality Act 2010. Candidates must be eligible to live and work in the UK. For the purposes of the Conduct Regulations 2003, when advertising permanent vacancies, we are acting as an Employment Agency Due to the high volume of applicants applying for all roles, we can only reply to candidates with the most relevant skills and experience. If you have not heard back from us within 48 hours of your application, please assume that you have been unsuccessful on this occasion. ....Read more...
Lettings Administrator Apprentice
Role Overview As a Lettings Administrator Apprentice, you will provide administrative support to our lettings team, ensuring smooth day-to-day operations and delivering outstanding service to our clients. This is an excellent opportunity to kickstart your career in the property industry, with training and mentorship provided throughout your apprenticeship. Key Responsibilities Tenant Support: Assist with tenant applications, referencing, and tenancy agreements. Landlord Support: Communicate with landlords regarding property updates, maintenance, and compliance. Administration: Maintain accurate records and update property management software. Property Marketing: Assist in preparing property listings, including descriptions, photos, and advertising. Appointment Coordination: Schedule property viewings, inspections, and contractor visits. Compliance: Support the team in ensuring all legal documentation (e.g., gas safety certificates, tenancy agreements) is up-to-date. Customer Service: Respond to inquiries via phone, email, and in-person in a professional and timely manner. General Support: Provide general administrative support to the lettings team as required. The above is not an exhaustive list of duties and you will be expected to perform different tasks as necessitated by the organisation which is relevant to your post within the company to meet the overall business objectives. Full training will be given. What We’re Looking For Skills: Strong organisational skills, attention to detail, and excellent written and verbal communication. Attitude: Positive, proactive, and eager to learn. IT Skills: Proficient in Microsoft Office (Word, Excel, Outlook). Interest: Genuine interest in the property industry and customer service. What We Offer A structured apprenticeship program with on-the-job training and mentorship. Support to achieve a nationally recognised qualification in Business Administration. Real-world experience in a fast-paced and exciting industry. Opportunities for career progression upon successful completion of the apprenticeship. A friendly and supportive work environment. Training:Level 3 Business Administrator apprenticeship standard, which includes: Level 2 Functional Skills in maths and English (if required)You will also develop the skills, knowledge and behaviours required to work within an office environment This apprenticeship is delivered in the workplace and 20% of yourworking time will be dedicated towards training and learning new skills. You will be allocated a tutor who will provide you with personal support and assessment at pre-arranged times Assessment is through a variety of methods including observations in the workplace, witness testimonies, product evidence and professional discussions. All evidence will be logged to your electronic portfolio Training Outcome: Pprogression to a permanent role upon successful completion of the apprenticeship. Employer Description:Welcome to Homelet - Professional Property Services. Homelet - We are a professional property services company based in Derbyshire, England, with offices in Alfreton, Derby, and Belper. We specialise in residential lettings and property management, offering services such as property valuations, marketing on major property portals, tenant sourcing, and comprehensive management for landlords. Our offerings include fully managed services, mortgage valuation letters, and assistance with buy-to-let property sourcing. We also provide mortgage advisory services to assist clients in purchasing their first or additional rental properties. For tenants, we offer information and application support, including tenant referencing and right-to-rent checks. Our mission is to combine first-class service with traditional values of respect, honesty, and fairness, ensuring a seamless experience for both landlords and tenants.Working Hours :Monday to Friday, 9.00am - 5.00pm - 30 mins lunch break.Skills: Communication skills,IT skills,Attention to detail,Organisation skills,Customer care skills,Presentation skills,Administrative skills,Number skills,Logical,Team working,Initiative ....Read more...
Workforce and Resourcing Apprentice- Business Administration Apprenticeship
Purpose of Post: To support and provide a high quality, effective and timely recruitment service to client departments Support the Workforce and Resourcing Team in all aspects of recruitment including guidance on the use of the recruitment module offering refreshers where necessary on the use of iTrent manager self-service To work with HR colleagues and departmental managers to deliver an operations and recruitment service that is consistent and adheres to policy and procedures Main Duties & Responsibilities: Support and assist the Workforceand Resourcing Team with recruitment campaigns, increasing skills set and knowledge on the process (using the City People Recruitment Module) to carry out the whole recruitment lifecycle and associated tasks Monitor the CRU Inbox despatching correspondence to the relevant parties or responding as required Work with workforce and resourcing team and managers to deliver a transactional, advisory and recruitment service that is locally tailored whilst maintaining consistency and adherence to policy and procedures Assist with a range of HR projects in recruitment to support service transformation Implement new processes and support lessons learnt following the project Share responsibility for the processing of relevant (digital) paperwork in accordance with departmental function & needs Attend meetings with colleagues to advise staff on their obligations and entitlements Relay advice to managers on policy, procedure and calculations Support placement of recruitment ads in close liaison with the advertising agency, ensuring correct language is used i.e. no discriminatory wording / gender neutral providing advice and guidance to recruiting managers Administer pre-employment checks where necessary eg. DBS clearances following the pre-employment vetting policy and procedure Assist in shortlisting, interviews and the running of the Assessment Centres, as and when required Update HR System(s) to reflect changes required for starters / leavers, changes and additions to pay (including changes in hours, additional payments, increments and honoraria) by contributing to the completion of relevant paperwork/electronic documents Updating iTrent / other IT systems and employee/staff files in a timely manner and with due regard to data protection and confidentiality requirements Actively seek to implement the City of London’s Occupational Health and Safety Policy in relation to the duties of the post, and at all times give due regard to the health and safety of both themselves and others when carrying out their duties Actively seek to implement the City of London’s Equal Opportunity Policy and the objective to promote equality of opportunity in relation to the duties of the post To undertake any other duties that may reasonably be requested appropriate to the grade Training: You will be supported to achieve the Business Administrator Level 3 Apprenticeship Theoretical training will be Biweekly with the support of the training provider Practical training and support will be given in the workplace allowing you to embed your learning in the working environment You will receive hours 6 per week to support with your apprenticeship studies Training Outcome: On successful completion of the apprenticeship, we aim to offer a permanent role within the team if a position is available Alternatively, we shall endeavour to secure an alternative position within the City of London Corporation Employer Description:The City Corporation with a rich history that precedes parliament, the City Corporation has been an ever constant throughout history adapting in order to meet modern demands of the City it serves, and is home to some of the world’s most striking modern architecture. The City of London Corporation forms part of London as a whole, along with the 32 London Boroughs who have responsibility for local government services within their local area. Based at the Guildhall the City Corporation looks after and promotes the City of London.Working Hours :Monday - Friday, 9.15am - 5.00pm core hours. Flexibility will be required for business needs. The role is 3 days in the office, 2 days working from home.Skills: Communication skills,IT skills,Attention to detail,Organisation skills,Customer care skills,Administrative skills,Number skills,Analytical skills,Logical,Team working,Non judgemental ....Read more...
Processing Support Lead
Do you want to join our Geo-data revolution? Fugro’s global reach and unique know-how will put the world at your fingertips. Our love of exploration and technical expertise help us to provide our clients with invaluable insights. We source and make sense of the most relevant Geo-data for their needs, so they can design, build and operate their assets more safely, sustainably and efficiently. But we’re always looking for new talent to take the next step with us. For bright minds who enjoy meaningful work and want to push our pioneering spirit further. For individuals who can take the initiative but work well within a team. The role .An exciting opportunity has arisen at Fugro in Aberdeen for a Processing Support Lead based on a 6 month fixed term contract with scope for extension We are looking to bring in a Processing Support Lead to strengthen our Marine Asset Integrity (MAI) business line. Based in Aberdeen, you will report to the MAI Client Deliverables Manager and work closely with the Processing Supervisor Lead and inspection personnel on and offshore. You will be responsible for all vessel and platform inspection support to increase efficiency and develop new ways of working. This includes overseeing the execution, ongoing progress, and final deliverables for MAI Client Deliverables department projects. The role ensures the safe, efficient, and profitable execution and delivery of ROV vessel-based pipeline and structural and platform-based inspections. It involves overseeing the recruitment and selection of offshore staff, delivering service line-specific onboarding for new hires, and managing leavers' processes. You will address employee relations issues such as disciplinaries, grievances, and performance improvement plans, and apply HR standards and processes, including absence management, holidays and leave of absence, and expenses, in liaison with crewing. Performance management, talent management, and succession planning are key responsibilities, along with resourcing the correct number of operational staff for the service line's planned activities. Ensuring the staff pool is well-trained and managing staff competency in coordination with the Offshore Personnel Development Team is essential. The role also involves managing teams responsible for technical project planning and mobilizations, overseeing engineering, vessels, logistics, operational procedures, equipment procurement, logistics, and the repair and planned maintenance of owned assets. Clear and accurate communication is crucial to link the offshore team with support services and to plan for upcoming projects and mobilizations. A typical day involves ensuring all work is undertaken to the highest quality and professionalism in accordance with the company Integrated Management System and project-specific documentation. You will ensure final deliverables are completed and issued in line with the contractual delivery schedule. Identifying personal training needs, bringing them to the attention of the department manager, and taking full advantage of the training opportunities provided is important. All activities must be carried out with the highest regard to the health and safety of all involved and to the protection of the environment and prevention of pollution. You will oversee the installation and management of integrity databases within the office and worksites, identify, research, and recommend new ways of working, including software, hardware, and workflows, and provide inspection support throughout project life cycles. The ideal candidate will have formal qualifications to a minimum of a Bachelor level in Engineering or IT, CSWIP 3.4u or 3.3u, and offshore experience working with ROVs as an Inspection Engineer and/or Hydrographic Data Processor. Proficiency in MS Office, good IT skills, the ability to understand technical engineering drawings, excellent communication skills, and a positive attitude are essential. Experience with COABIS, Apollo, and NEXUS, the ability to generate electronic reports, and experience with digital video, image editing, and eventing packages are desirable. What we offer: Fugro provides a positive work environment as well as projects that will satisfy the most curious minds. We also offer great opportunities to stretch and develop yourself. By giving you the freedom to grow faster, we think you’ll be able to do what you do best, better. Which should help us to find fresh ways to get to know the earth better. We encourage you to be yourself at Fugro. So bring your energy and enthusiasm, your keen eye and can-do attitude. But bring your questions and opinions too. Because to be the world’s leading Geo-data specialist, we need the strength in depth that comes from a diverse, driven team. Extensive career & training opportunities both nationally and internationally. Competitive salary accompanied by an attractive package including a contributory pension scheme Flexible working hours and the potential to work 2 days a week from home in accordance with your manager and corporate policies. Option to lease an electric car. Our view on diversity, equity and inclusion At Fugro, our people are our superpower. Their variety of viewpoints, experiences, knowledge and talents give us collective strength. Distinctive beliefs and diverse backgrounds are therefore welcome, but discrimination, harassment, inappropriate behaviour and unfair treatment are not. Everybody is to be well-supported and treated fairly. And everyone must be valued and have their voice heard. Crucially, we believe that getting this right brings a sense of belonging, of safety and acceptance, that makes us feel more connected to Fugro’s purpose ‘together create a safe and liveable world’ – and to each other. Disclaimer for recruitment agencies: Fugro does not accept any unsolicited applications from recruitment agencies. Acquisition to Fugro Recruitment or any Fugro employee is not appreciatedApply for this ad Online! ....Read more...
Apprentice Maintenance & Operations Engineering Technician (Electrical & Instrumentation)
The business is looking for an apprentice to train alongside our existing experienced team of engineers on all aspects of operational, maintenance engineering (Instrumentation & Electrical) duties. As an apprentice you will study a range of programmes working towards a level 3 maintenance and operations engineering technician apprenticeship standard, covering a variety of skills and qualifications while earning a wage and completing invaluable practical skills in industry: - Apprentice technicians will undertake installation, testing, servicing, removal, replacement, maintenance, and repair of a range of equipment, sometimes complex, as part of planned preventative and reactive maintenance programmes. They may also undertake decommissioning activities when plant is being removed from service. Candidates should be confident, keen, enthusiastic, and committed with a positive attitude to work. This is an ideal opportunity to gain experience in all aspects of maintenance and operations engineering (electrical) and achieve an advanced apprenticeship qualification, with the second largest titanium dioxide producer in the world. Initially based at The Catch facility (Stallingborough) then on site following a day pattern – with a shift placement – where apprentices are required to work both the day and night shift with experienced engineers to gain hands on learning. *New applicants who meet the entry requirements of the role will be contacted by the Apprentice Employment Agency team to discuss your application and the apprenticeship in further detail. Please ensure you provide up to date contact details and check your junk in case of redirected emails. Failure to respond to communications will result in your application being withdrawn.Training:During this programme, you will undertake off the job training at The Catch for the first year. Further training will be provided by experienced engineering team members specific on the job training by a mentor on your designated shift. You will also be supported by a dedicated assessor who will guide and mentor you throughout your apprenticeship. You will undertake MAINTENANCE AND OPERATIONS ENGINEERING TECHNICIAN Apprenticeship, and you will be required to undertake an end-point assessment. Core knowledge: A technician will understand: First principles relating to the operation and maintenance of appropriate plant and equipment Relevant industry health and safety standards, regulations, and environmental and regulatory requirements Maintenance and operational practices, processes and procedures covering a range of plant and equipment The relevant engineering theories and principles relative to their occupation Core skills: A technician will apply their knowledge of plant and systems to safely perform maintenance and operational activities with minimum supervision. This will require them to: Comply with industry health, safety and environmental working practices and regulations Locate, and rectify faults on plant and equipment Communicate with and provide information to stakeholders in line with personal role and responsibilities Read, understand and interpret information and work in compliance with technical specifications and supporting documentation Prepare work areas to undertake work related activities and reinstate those areas after the completion of the work related activities Inspect and maintain appropriate plant and equipment to meet operational requirements Assess and test the performance and condition of plant and equipment Communicate, handover and confirm that the appropriate Engineering process has been completed to specification In addition an electrical technician will: Position, assemble, install and dismantle electrical plant and equipment, which will include motors, switchgear, cables & conductors, to agreed specifications Carry out planned, unplanned and preventative maintenance procedures on Instrumentation & Electrical plant and equipment. Replace, repair and/or remove components in Instrumentation & Electrical plant and equipment and ensure its return to operational condition. Diagnose and determine the cause of faults in Instrumentation & Electrical plant and equipment Successful achievement of the end-point assessment will lead to Final certification of the apprenticeship. Complete HNC Electrical/ Electronic Engineering *New applicants who meet the entry requirements of the role will be contacted by the Apprentice Employment Agency team to discuss your application and the apprenticeship in further detail. Please ensure you provide up to date contact details and check your junk in case of redirected emails. Failure to respond to communications will result in your application being withdrawn.Training Outcome: On completion of the apprenticeship, successful candidates could secure a role in a successful, dynamic company Employer Description:Tronox is the largest vertically integrated titanium dioxide producer in the world, the largest producer of merchant titanium chemicals, and the leading manufacturer of specialty titanium products. Tronox provides numerous products and services for a variety of industries around the world. From coatings to paper and polymers to pigments, our products and services are used to improve everyday life. Thousands of products in our world, from plastic bags to aerospace parts, get their start with help from Tronox. Tronox employ nearly 7,000 across six continents, and have a rich diversity, unmatched vertical integration model, and unparalleled operational and technical expertise across the value chain, position Tronox as the preeminent titanium dioxide producer in the world. We’re committed to our people, our customers, and our communities. With a broad global reach and deep local roots, Tronox embrace and celebrate the unique character and culture of every place they call home. From the west coast of Australia to the east coast of the U.S., from Europe to South Africa, and from mines to research and development labs, they bring the same passion to work in every location, everywhere, every day.Working Hours :Monday- Friday 8am- 4pm (30mins unpaid lunch) Initially based at Catch then onsite on a day pattern with a shift placement. You are required to work both the day/night shift with experienced operators to gain hands on learning. Shifts to be confirmed.Skills: Communication skills,IT skills,Attention to detail,Organisation skills,Customer care skills,Problem solving skills,Presentation skills,Administrative skills,Number skills,Analytical skills,Logical,Team working,Creative,Initiative,Non judgemental,Patience ....Read more...