Electrical Tester Harrow £38,000 - £42,500 Basic + Overtime (OTE £70k) + Van + Paid Qualifications + Progression + Stability + Pension + Immediate StartAre you a qualified electrical tester or electrician looking to become an electrical tester looking for a long-term and rewarding role with a leading electrical contractor? If so, this is a fantastic opportunity to earn in excess of £70,000 with a company that values quality workmanship, professionalism, and employee development.As an electrical tester you'll carry out EICRs and remedial works across domestic and commercial properties, mainly within social housing and council contracts. This role offers job variety, independence, and the chance to progress within a well-established business that rewards commitment and technical excellence.Your Job As An Electrical Tester Will Include: * Carrying out fixed wiring testing (EICR) in domestic and commercial properties * Completing remedial works at time of testing and follow-up rewire programmes * Liaising with tenants and clients, delivering excellent customer service * Ensuring all work meets the latest electrical and safety regulationsAs An Electrical Tester You Will Have: * Level 2/3 * 2391 * 18th Edition Wiring Regulations (C&G 2382) * Experience or desire to start a career in domestic and commercial EICR testing and remedial work * Strong knowledge of fault-finding and diagnostics * Excellent communication and customer service skills * Full UK driving licence and willingness to travel in and around North / East LondonKeywords: 2391, NVQ Level 3, Testing and Inspection Engineer, Electrical Engineer, Electrician, Electrical, City And Guilds, Domestic Electrician, Commerical, Domestic, Residential....Read more...
Electrical Tester Watford £38,000 - £42,500 Basic + Overtime (OTE £70k) + Van + Paid Qualifications + Progression + Stability + Pension + Immediate StartAre you a qualified electrical tester or electrician looking to become an electrical tester looking for a long-term and rewarding role with a leading electrical contractor? If so, this is a fantastic opportunity to earn in excess of £70,000 with a company that values quality workmanship, professionalism, and employee development.As an electrical tester you'll carry out EICRs and remedial works across domestic and commercial properties, mainly within social housing and council contracts. This role offers job variety, independence, and the chance to progress within a well-established business that rewards commitment and technical excellence.Your Job As An Electrical Tester Will Include: * Carrying out fixed wiring testing (EICR) in domestic and commercial properties * Completing remedial works at time of testing and follow-up rewire programmes * Liaising with tenants and clients, delivering excellent customer service * Ensuring all work meets the latest electrical and safety regulationsAs An Electrical Tester You Will Have: * Level 2/3 * 2391 * 18th Edition Wiring Regulations (C&G 2382) * Experience or desire to start a career in domestic and commercial EICR testing and remedial work * Strong knowledge of fault-finding and diagnostics * Excellent communication and customer service skills * Full UK driving licence and willingness to travel in and around North / East LondonKeywords: 2391, NVQ Level 3, Testing and Inspection Engineer, Electrical Engineer, Electrician, Electrical, City And Guilds, Domestic Electrician, Commerical, Domestic, Residential....Read more...
Multi-Skilled Maintenance Engineer (Nights)
Location: Northampton, Northamptonshire
Salary: £50,000
Shift: Sunday – Thursday
Industry: FMCG / Manufacturing
Company Overview
Synergi Search & Select are working on behalf of a leading FMCG manufacturer with operations across multiple markets. We are recruiting for a Multi-Skilled Maintenance Engineer to join their night shift engineering team.
Key Responsibilities
Carry out reactive and planned maintenance on high-speed production machinery
Support and deliver planned preventative maintenance schedules
Diagnose and repair mechanical and electrical faults to minimise downtime
Implement effective solutions for breakdowns and recurring issues
Ensure all work is carried out in line with company quality, health and safety standards
Candidate Requirements
Proven experience in a multi-skilled maintenance engineering role within FMCG, food, or manufacturing
Good knowledge of planned preventative maintenance systems
Strong fault-finding and problem-solving skills
Competent across mechanical and electrical systems, with experience of automation and PLCs desirable
Excellent awareness of Health & Safety in a manufacturing environment
Benefits
Salary up to £50,000
Fixed Sunday – Thursday night shift
Opportunity to work within a leading manufacturer with long-term career prospects
Training and development provided
Application Process
If you are interested in this opportunity, please apply via this advert or contact Anamika Sarkar on 01923 227 543. Alternatively, you can send your CV....Read more...
An established engineering organisation operating within the defence sector is seeking a Systems Engineer to join its growing engineering team. This is an opportunity to contribute to the development of advanced surveillance, tracking and targeting systems for land and naval applications.
Working within multidisciplinary project teams, you will help ensure mechanical, electrical and software engineering activities are aligned and that system designs meet customer requirements. Projects range from early-stage concept demonstrators with significant technical challenges through to the development and enhancement of established products.
This role offers the opportunity to take ownership of key systems engineering activities, contribute to technical decision-making and support the successful delivery of complex engineering projects.
Key Responsibilities
- Capture, define and manage system requirements throughout the development lifecycle.
- Develop functional and physical system architectures.
- Contribute to functional design, detailed design and safety analysis.
- Identify and mitigate technical and programme risks.
- Develop engineering management plans covering safety, test integration, acceptance and technical risk.
- Gather and manage verification evidence to demonstrate compliance with system requirements.
- Produce procurement specifications for subsystems and components.
- Write test specifications and support system verification activities.
- Participate in design reviews and technical assessments.
- Develop environmental qualification plans covering EMC, temperature, shock and vibration.
- Prepare technical reports and engineering documentation.
Skills & Experience
Essential requirements
- A degree in Engineering or a relevant physical science.
- Approximately 13 years of engineering experience.
- A strong understanding of systems engineering principles, particularly INCOSE guidance and best practices.
- Multidisciplinary knowledge across mechanical, electrical and software engineering, with a specialism in at least one area.
Desirable experience
- Previous experience working as a Systems Engineer and involvement in the full product development lifecycle.
- Experience working closely with internal and external stakeholders.
- Familiarity with requirements management tools such as DOORS, Visure or R4J, and work package management using Jira.
- Experience working within multidisciplinary teams on complex engineering projects.
- A background in the defence sector or a similar engineering environment.
- Knowledge of safety management standards, including MIL-STD-882E, DEF STAN 00-56 or ISO 12100.
- Understanding of statutory compliance and CE marking.
- Experience with fault-tree analysis and Failure Mode and Effects Analysis (FMEA).
Working Arrangements & Benefits
- Hybrid and flexible working arrangements.
- 37.5-hour working week, with an early finish on Fridays.
- 28 days of annual leave.
- Christmas shutdown.
- Holiday purchase scheme.
- Income protection and life assurance.
- Employee Assistance Programme, including access to remote GP services and wellbeing support.
- Health Cash Plan and Employee discounts and wellbeing initiatives.
- Employee share incentive and save-as-you-earn schemes.
- Electric vehicle salary sacrifice scheme.
- Learning and development opportunities.
- Free onsite parking.
Security Requirements
Candidates must be eligible to obtain UK Security Clearance. Successful applicants will be required to provide evidence of identity, employment history, right to work in the UK and at least five years of UK residency.
If you are looking to develop your systems engineering career while contributing to complex, high-performance engineering projects, we would be keen to hear from you.
TT....Read more...
A global technology organisation is looking for a Full Stack Software Engineer to develop and enhance a range of data-driven applications, cloud platforms and intelligent software tools.
This is a hands-on, full-stack engineering role combining backend development, cloud infrastructure, web technologies and emerging AI capabilities. Youll help build applications that improve business processes, support decision-making and deliver better user experiences across a range of teams.
Working within a small, collaborative engineering team, youll contribute to technical design decisions, develop new features and help evolve existing applications into scalable, reliable production platforms. The role offers exposure to a broad technology stack and the opportunity to work on practical AI integrations alongside established software engineering projects.
Key Responsibilities
- Design, develop and maintain applications across the full stack, from backend services and APIs to user-facing interfaces.
- Build production software using Python, TypeScript and modern web technologies.
- Develop cloud-based applications and services using AWS and other cloud platforms.
- Integrate applications with data pipelines, enterprise systems and external services.
- Build AI-powered features, including LLM integrations, prompt orchestration and tools that connect AI agents with data and services.
- Contribute to architectural and technical decisions, evaluating frameworks, tools and implementation approaches.
- Develop proof-of-concepts to assess new technologies and demonstrate potential solutions.
- Investigate and resolve production issues, optimise application performance and improve software reliability.
- Design efficient data processing and integration patterns for applications handling large datasets.
- Implement authentication and authorisation mechanisms for secure enterprise applications.
- Support infrastructure deployment, Infrastructure as Code and CI/CD pipeline development.
- Collaborate with engineering, product, data and business stakeholders to define requirements and deliver new features.
- Help scale successful applications into robust, maintainable platforms suitable for wider adoption.
Essential Requirements
- Strong Python development experience, including building production applications.
- Practical experience with AWS services such as Lambda, ECS/Fargate, S3 and API Gateway.
- Experience deploying and managing containerised applications using Docker.
- Good SQL skills and experience working with data warehouses.
- Hands-on experience with Infrastructure as Code, particularly Terraform.
- Proficiency with Git and modern CI/CD workflows.
- Experience contributing to the design and implementation of multi-component software systems.
- An interest in using AI-assisted development tools and building AI-enabled software features.
- Strong problem-solving skills and the ability to collaborate effectively within a cross-functional team.
Desirable Experience
- Modern web development frameworks, particularly Next.js, React and TypeScript.
- Google Cloud Platform services, especially BigQuery.
- Enterprise authentication and authorisation, including SSO, SAML, OAuth and role-based access control.
- Developing and optimising applications that process high volumes of data.
- Experience with B2B SaaS platforms, CRM systems or business productivity tools.
- Designing and automating ETL and data integration pipelines at scale.
- Supporting the evolution of early-stage applications into enterprise-grade platforms.
- Agile development methodologies and tools such as Jira.
- Full-stack development spanning infrastructure, backend services and frontend interfaces.
- Understanding how technical decisions influence business outcomes, usability and user adoption.
- Automated document generation or data visualisation libraries.
- Building applications with LLMs and AI APIs.
- Familiarity with AI orchestration, retrieval-augmented generation (RAG), or agent and tool frameworks such as the Model Context Protocol (MCP).
The Opportunity
This role is ideal for a Software Engineer who enjoys working across the full development lifecycle and wants to broaden their experience across cloud technologies, data-driven applications and AI-enabled solutions.
Youll join a collaborative engineering environment where you can contribute ideas, take ownership of development work and help deliver scalable software with tangible business value.
Interested in learning more? Contact Tom Todd at Holt Executive to discuss the opportunity in confidence.
TT....Read more...
Mobile Multi-Skilled Engineer – Commercial Sites – Thames Valley, South West & Midlands – Up to £45,000 CBW Staffing Solutions are currently recruiting for a Mobile Multi-Skilled Engineer, ideally with an electrical bias, to cover a portfolio of commercial properties across the Thames Valley, South West & Midlands . The successful candidate will be responsible for carrying out planned preventative maintenance (PPM), reactive maintenance and general building services works across a varied portfolio of sites. This is an excellent opportunity for an engineer who enjoys working independently, travelling between sites and dealing with a variety of maintenance requirements. The ideal candidate will live somewhere Central in the patch (Oxford, Burford, Cirencester, Chelthenham) Areas covering include Bristol, Reading, Southampton, Watford, Cheltenham, Swindon, Milton Keynes and Worcester. Key Duties & ResponsibilitiesCarry out planned preventative and reactive maintenance across multiple sites.Electrical maintenance, fault-finding and minor installation works.Lighting, emergency lighting and power distribution.Testing and maintenance of electrical systems and equipment.Basic mechanical maintenance, including pumps, motors, AHUs and FCUs.Carry out general plumbing and building fabric maintenance.Monitor and investigate faults with building services equipment.Complete routine plant and equipment checks.Respond to reactive maintenance issues and breakdowns.Liaise professionally with clients, site contacts and contractors.Complete maintenance records, job sheets and compliance documentation.Ensure all works are completed safely and in line with relevant Health & Safety procedures.Travel between sites across the Thames Valley, South West & Midlands.Hours & PackageSalary up to £45,000 per annumMonday to Friday – 08:00–17:00Call-out rota – details to be confirmed22 days annual leave + bank holidaysCompany vehicle + fuel cardOvertime opportunitiesOngoing training and developmentRequirementsElectrically or mechanically qualified – City & Guilds / NVQ Level 2 or above18th Edition desirable for electrically biased candidatesProven experience within commercial building maintenanceMulti-skilled building services experienceStrong electrical or mechanical maintenance and fault-finding skillsFull UK driving licenceGood communication and customer service skillsMust be able to travel across the required areaPlease send your CV to Dan Barber at CBW Staffing Solutions for more information and to avoid missing out on this opportunity!....Read more...
General Maintenance Engineer – FM Service Provider – Commercial Building – Farringdon, London – Up to £45,000 per annum An exciting opportunity to join an established Facilities Management service provider at a static commercial building in Farringdon, London. CBW Staffing Solutions is currently recruiting for an General/Electrical Maintenance Engineer to work as the sole engineer responsible for the day-to-day maintenance of a 10-floor commercial building. The successful candidate will ideally be electrically qualified, with a proven track record in commercial building maintenance and strong electrical fault-finding skills. You will be responsible for delivering planned preventative and reactive maintenance across all building services, ensuring the building operates efficiently and maintaining high standards of service for the client. In return, the company is offering a competitive salary of up to £45,000, 25 days holiday plus bank holidays, overtime opportunities, and excellent opportunities for training and career progression. Hours of Work:Monday to Friday08:00 am – 17:00 pm Key Duties & Responsibilities:Carry out planned preventative maintenance (PPM) and reactive maintenance across all 10 floorsCarry out electrical fault-finding and maintain lighting, power distribution and control panelsPerform emergency lighting testing and fire alarm checksMonitor BMS systems and carry out plant checksMaintain AHUs, FCUs, pumps, motors and associated plantCarry out minor plumbing and general building fabric maintenanceDiagnose and resolve faults across building servicesComplete maintenance records and compliance documentationCoordinate and escort specialist contractors when requiredEnsure all work is completed in line with health and safety regulationsLiaise professionally with the client and site managementTake ownership of the building's day-to-day maintenance requirements Package:Salary: Up to £45,000 per annum25 days holiday plus bank holidaysCompany pension schemeOvertime opportunitiesTraining and development opportunitiesExcellent long-term career progression Requirements:Electrically qualified – City & Guilds / NVQ Level 2 & 3 or equivalent (desirable not essential) 18th Edition Wiring Regulations (desirable not essential) Must be able to provide copies of trade certificatesProven track record in commercial building maintenanceStrong electrical fault-finding skillsGood understanding of mechanical and general building servicesAbility to work independently and manage priorities effectivelyStrong communication and client-facing skillsFor more information or to apply, please send your CV to Bailey White at CBW Staffing Solutions!....Read more...
An opportunity has arisen for a Configuration Management Engineer to support the development of mission-critical electro-mechanical and pneumatic systems used on advanced airborne platforms. This role sits within a highly regulated, safety-critical environment supporting complex aerospace programmes across the full engineering lifecycle.
You will work closely with multidisciplinary delivery teams, ensuring robust configuration and data management processes are embedded from requirements definition through to verification and audit.
As a Configuration Engineer, you will be responsible for discharging the five key Configuration Management activities across delivery teams and programme lifecycle phases. You will provide clear direction on CM and Data Management processes and tools, covering system requirements, hardware, software and modelling environments.
Key Responsibilities
- Drive a proactive Configuration and Data Management approach across engineering teams
- Deliver agreed work packages to cost and schedule constraints
- Develop, review and execute Configuration Management Plans
- Configuration Identification across system, software and hardware artefacts
- Change Control analyse proposed design changes for system-level impact
- Co-chair and operate Change Control Boards
- Provide Configuration Status Accounting and manage configuration baselines
- Conduct Functional and Physical Configuration Audits
- Ensure project datasets remain controlled and aligned with programme governance
- Manage release, submission and tracking of contract and supplier data
What Were Looking For
- Strong understanding of Configuration Management aligned to DEF STAN 05-57 and EIA-649A-1
- Practical experience across the five CM pillars
- Experience within safety-critical product development environments
- Data Management experience supporting contractual and supplier deliverables
- Excellent organisational skills with strong attention to detail
- Logical, structured mindset with the ability to influence delivery teams
- Degree with 4+ years relevant experience (or 10+ years equivalent industry experience)
- Ability to interface confidently across engineering functions and occasionally with customers
Working Environment
You will join a dynamic aerospace engineering environment focused on the design, manufacture and test of high-performance airborne systems. The organisation supports advanced platforms worldwide and operates within a structured, quality-driven framework typical of regulated defence and aerospace programmes.
Benefits
- Half-day finish on Fridays
- Hybrid & flexible work options
- 25 days annual leave (plus bank holidays), increasing with service
- Option to buy/sell up to 5 days annual leave
- Private medical insurance (optional family cover)
- Pension scheme with up to 8% employer contribution
- Life assurance and group income protection
- Flexible benefits package (health cash plan, dental insurance, gym membership, EV scheme, cycle to work, critical illness cover)
- Employee assistance programme (mental health & wellbeing support)
- Professional membership reimbursement (discretionary)....Read more...
Senior Mechatronics Engineer – Cambridge – Medical Devices
A leading medical devices organisation in Cambridge is expanding its development team and is seeking a highly capable Senior Mechatronics Engineer to drive the creation of new, life‑changing technologies.
You’ll work closely with mechanical engineers, physicists, electronics engineers and other specialists to design and develop complex medical devices that improve and save lives. This is hands‑on, multidisciplinary engineering at its best.
We’re ideally looking for someone with experience in the medical devices sector, but we’re also open to candidates from other highly regulated, technically demanding environments such as biotechnology, life sciences or healthcare technology.
Strong machine design capability is essential. You’ll be confident with CAD, prototyping and building functional mechanisms. The project portfolio spans multiple medical specialisms. While some work will involve surgical robotics, this role is not suited to someone who wants to focus exclusively on robotics — you’ll thrive here if you enjoy variety, switching between different device types and engineering challenges.
You will likely hold a degree in mechatronics, robotics, mechanical engineering or a closely related discipline that has led you into mechatronics design.
Joining this organisation places you on a strong long‑term career trajectory. Engineers here continually develop their skills, progress into senior roles and contribute to genuinely impactful technologies. Alongside career development, you’ll receive an excellent starting salary (dependent on experience), bonuses, an enhanced pension and a benefits package rarely seen elsewhere.
People tend to stay with this company for the long term, the diversity of projects keeps the work fresh and engaging.
This is an on‑site role, five days per week. Due to the hands‑on nature of the work, remote arrangements are not feasible.
We expect significant interest in this position. If you’re keen, we recommend applying promptly.
To discuss the role in more detail, contact Andrew Welsh, Director of Medical Devices, Biotech and DeepTech Recruitment at Newton Colmore, on +44 121 268 2240. Alternatively, submit your CV and a member of our team will be in touch to discuss next steps.....Read more...
Join our leading International Aerospace and Defence company. We are seeking a highly skilled Senior Systems Engineer to play a critical role in supporting our current engine development program. This is an exciting opportunity to contribute to the development of a complex, multifaceted rocket engine system composed of numerous components.
Key Responsibilities
Manage the Design, Verification, and Compliance Matrix at a top level.
Oversee the overall engine system architecture, including
System level analysis FMECAs, radiation, reliability, mechanical, thermal, fluidic, electromagnetic, etc.
Documentation Design, Design Justification Document, Software Requirements Specification, Engine Test Plan, etc.
Collaborate with the Project Manager to plan and organise project tasks and resources.
Support the engine system build, assembly, and test development process by reviewing route cards, build sequences, and integration processes.
Key Requirements
Master???s degree in engineering Aerospace, Mechanical, or Electrical engineering preferred.
Minimum of 5 years of experience in complex product development within the industry.
Proven track record as a technical leader with clear communication skills, leading large multidisciplinary and multicultural engineering teams.
Understanding of Electrical or Harnessing Design, routing, and schematic.
Proficiency in System Thermal Equipment design and selection.
Knowledge of System Analysis, including but not limited to: Fluidic Analysis, Performance Analysis, Thermal Analysis, Radiation Assessment, Failure Modes Effects and Criticality Analysis or FMECA.....Read more...
Join our leading International Aerospace and Defence company. We are seeking a highly skilled Senior Systems Engineer to play a critical role in supporting our current engine development program. This is an exciting opportunity to contribute to the development of a complex, multifaceted rocket engine system composed of numerous components.
Key Responsibilities
Manage the Design, Verification, and Compliance Matrix at a top level.
Oversee the overall engine system architecture, including
System level analysis FMECAs, radiation, reliability, mechanical, thermal, fluidic, electromagnetic, etc.
Documentation Design, Design Justification Document, Software Requirements Specification, Engine Test Plan, etc.
Collaborate with the Project Manager to plan and organise project tasks and resources.
Support the engine system build, assembly, and test development process by reviewing route cards, build sequences, and integration processes.
Key Requirements
Master???s degree in engineering Aerospace, Mechanical, or Electrical engineering preferred.
Minimum of 5 years of experience in complex product development within the industry.
Proven track record as a technical leader with clear communication skills, leading large multidisciplinary and multicultural engineering teams.
Understanding of Electrical or Harnessing Design, routing, and schematic.
Proficiency in System Thermal Equipment design and selection.
Knowledge of System Analysis, including but not limited to: Fluidic Analysis, Performance Analysis, Thermal Analysis, Radiation Assessment, Failure Modes Effects and Criticality Analysis or FMECA.....Read more...
Satellite Ground Station Systems Engineer required to work at the cutting edge of terrestrial radio facility spacecraft communication systems research, design and development of antennas for in orbit communications.
Requirements
Satellite communications commercial experience of Ground Station system integration including system setup, coding and hardware. Deep experience in one or more of???
Telemetry, Tracking, and Command systems to monitor satellite health, track orbit, and process command uplinks.
Payload Data Downlink signal processing of scientific, imaging and communication data from spacecraft.
Parabolic reception antenna dish, feed horn, waveguide, low noise amplifiers LNAs, space receivers and related.
Ground Stations as a Service GSaaS development of Cloud integrated networks allowing operators to lease antenna time.
You will also have a PhD or MSc in Satellite Communications, Telecommunications systems or similar.
Experience on collaborative projects and bid writing for framework programmes such as IUK, ESA or Horizon.
Experience working on externally funded collaborative projects with external stakeholders or equivalent relevant experience.
Responsibilities
Technical delivery on projects, technical consultancy to businesses, engagement with universities and Research centres on satellite Ground Station Systems. ....Read more...
Satellite Ground Station Systems Engineer required to work at the cutting edge of terrestrial radio facility spacecraft communication systems research, design and development of antennas for in orbit communications.
Requirements
Satellite communications commercial experience of Ground Station system integration including system setup, coding and hardware. Deep experience in one or more of???
Telemetry, Tracking, and Command systems to monitor satellite health, track orbit, and process command uplinks.
Payload Data Downlink signal processing of scientific, imaging and communication data from spacecraft.
Parabolic reception antenna dish, feed horn, waveguide, low noise amplifiers LNAs, space receivers and related.
Ground Stations as a Service GSaaS development of Cloud integrated networks allowing operators to lease antenna time.
You will also have a PhD or MSc in Satellite Communications, Telecommunications systems or similar.
Experience on collaborative projects and bid writing for framework programmes such as IUK, ESA or Horizon.
Experience working on externally funded collaborative projects with external stakeholders or equivalent relevant experience.
Responsibilities
Technical delivery on projects, technical consultancy to businesses, engagement with universities and Research centres on satellite Ground Station Systems. ....Read more...
Electronics Engineer – Security Clearence - Cambridge
An opportunity has opened for an Electronics Engineer to join a specialist technology group based on a modern science park just outside Cambridge. The work centres on developing advanced electronic systems that contribute directly to the UK’s safety and resilience. Everything here is focused on defensive innovation, and the pace of growth means you’d be stepping into an environment with strong momentum and long‑;term investment behind it.
In this role, you’ll be involved in projects that move rapidly from early ideas to working prototypes. You’ll work alongside engineers, scientists and designers from a range of backgrounds, shaping concepts, testing approaches and turning complex requirements into practical solutions. The work covers the full development cycle, from initial system understanding through to design, documentation, hands‑on testing and final delivery. It’s varied, technically stretching and ideal for someone who enjoys solving real‑world engineering challenges.
The team is made up of people who are naturally curious and enjoy pushing the boundaries of what’s possible. Whether you’re leading a project or contributing as part of a wider group, you’ll be in an environment that encourages collaboration, knowledge‑sharing and continuous development. It’s a place where you can build a long‑term career in high‑end R&D.
You’ll bring a strong academic background and experience developing complex electronic systems. You should be comfortable working across hardware design, schematic capture, PCB layout, board bring‑up and testing, with exposure to areas such as embedded development, FPGA work, DSP, signal processing, high‑speed or RF design, or communications protocols. The exact mix is flexible — what matters most is sound engineering judgement and the ability to contribute effectively within multidisciplinary teams.
The organisation offers a supportive culture, a well‑equipped campus environment and a comprehensive benefits package. Relocation support is available where needed, and there’s an active social side to the business, from sports groups to creative activities.
Given the nature of the work, existing security clearance is ideal, though the ability to obtain clearance is essential.
Interest in this role is expected to be high, so early applications are encouraged.
To discuss the position in more detail, you can contact Andrew Welsh, Director of Medical Devices, Biotech and DeepTech Recruitment at Newton Colmore, on +44 121 268 2240. You can also submit your CV and a member of the team will be in touch to talk through next steps.....Read more...
Electrical Night Shift Engineer – 4 on 4 off – Prestigious Commercial Building – Tottenham Court Road, London – £50,000 per annum CBW Staffing Solutions are currently recruiting for a Night Shift Electrical Engineer to join an established FM service provider at a prestigious commercial building in Tottenham Court Road, London. The successful candidate will be a fully qualified Electrical Engineer with a strong background in commercial building maintenance. Working as part of a small on-site engineering team, you will be responsible for carrying out planned preventative maintenance (PPM), reactive maintenance, fault-finding and electrical repairs across the site. This is an excellent opportunity to join a well-established company, offering a competitive salary, a consistent 4 on 4 off night shift pattern, overtime opportunities and further training and career progression. Package & Hours of WorkSalary of up to £50,000 per annum4 on 4 off shift patternNight shifts: 20:00 – 08:00Uniform and tools providedCycle to Work scheme20 days annual leaveOvertime opportunitiesCompany pension schemeInternal progression and development opportunitiesKey Duties & ResponsibilitiesCarry out planned preventative maintenance (PPM) and reactive maintenance across all electrical building services.Diagnose faults and undertake electrical fault-finding and repairs.Maintain lighting systems, including lamp and ballast replacements and Simmtronic/Philips lighting systems.Carry out emergency lighting inspections and testing.Maintain electrical distribution systems, including distribution boards and associated equipment.Undertake minor electrical installation works, including installing new sockets, lighting and circuits where appropriately authorised.Ensure all maintenance tasks are completed within agreed timescales and to the required standards.Identify and report faults with building services equipment, taking appropriate action to resolve issues.Ensure all work is completed in accordance with health and safety regulations and site procedures.Escort specialist subcontractors and monitor their activities while on site.Maintain accurate maintenance records and complete all relevant paperwork.Liaise professionally with the client and site management team regarding maintenance issues and service delivery.Ensure contractual obligations, KPIs and SLAs are consistently achieved.Monitor mechanical building services plant and report any faults or abnormalities to the relevant team.RequirementsElectrically qualified to Level 2 and Level 3, such as City & Guilds or NVQ, or equivalent.18th Edition Wiring Regulations qualification.Proven experience working within commercial building maintenance.Strong knowledge of electrical PPM, reactive maintenance and fault-finding.Experience working within a large commercial building would be advantageous.Must be able to provide copies of relevant electrical qualifications and trade certificates.Good communication and problem-solving skills.Professional, client-facing approach.Reliable and able to work independently during night shifts.How to Apply If you are a qualified Electrical Engineer looking for your next opportunity in London, please send your CV to Alex Denton at CBW Staffing Solutions to avoid missing out on this opportunity....Read more...
We are looking for an experienced ILS Engineer to support defence and maritime projects throughout the equipment lifecycle, from bid and development phases through to in-service support.
Key Responsibilities
Deliver ILS activities including Supportability Analysis, LORA, Spares Analysis, Obsolescence Management, and Whole Life Costing.
Support bid and proposal activities by providing ILS estimates and technical input.
Develop and maintain logistics support documentation and repositories.
Collaborate with engineering, project, and customer teams to ensure supportability requirements are met.
Contribute to continuous improvement initiatives and the growth of ILS capabilities.
Requirements
Experience in Integrated Logistics Support within the defence or maritime sector.
Knowledge of Defence Logistics Framework requirements.
Understanding of supportability analysis, maintenance planning, and lifecycle support.
Strong communication and stakeholder management skills.
HNC and HND or degree qualification in an engineering discipline preferred.....Read more...
We are looking for an experienced ILS Engineer to support defence and maritime projects throughout the equipment lifecycle, from bid and development phases through to in-service support.
Key Responsibilities
Deliver ILS activities including Supportability Analysis, LORA, Spares Analysis, Obsolescence Management, and Whole Life Costing.
Support bid and proposal activities by providing ILS estimates and technical input.
Develop and maintain logistics support documentation and repositories.
Collaborate with engineering, project, and customer teams to ensure supportability requirements are met.
Contribute to continuous improvement initiatives and the growth of ILS capabilities.
Requirements
Experience in Integrated Logistics Support within the defence or maritime sector.
Knowledge of Defence Logistics Framework requirements.
Understanding of supportability analysis, maintenance planning, and lifecycle support.
Strong communication and stakeholder management skills.
HNC and HND or degree qualification in an engineering discipline preferred.....Read more...
Electronics Engineer – Medical Devices – Cambridge
Due to the expanding nature of Medical Devices, Wearable Technologies, Robotics, Artificial Intelligence, and other advanced technologies, we are looking for someone to work on the invention of new Medical Devices. Based in Cambridge, you will be collaborating with engineers and scientists on the development of industry-changing, life-saving, and life-improving medical devices.
Technologies are developing all the time, and this organisation needs to stay at the forefront of technological breakthroughs. Due to this, they need experienced Electronics Engineers who are happy to work across several different projects.
We ideally need someone who has past experience with Medical Devices within ISO 13485 or EN 60601 standards.
While working on brand-new technologies, you will be problem-solving and thinking up exciting new ways of approaching problems on projects. This will keep your role very interesting, meaning it is unlikely that you will ever get bored in this role.
Apart from past experiences as an Electronics Engineer in Medical Devices, it is expected that you would hold a degree in an Electronics Engineering field that led you into this line of work.
You will be rewarded with an excellent starting salary, bonus, pension, gym membership, free lunches, and other excellent benefits.
I expect a lot of interest in this role, so if you are interested, I would suggest making an application now or risk missing out.
For more general information, please feel free to call Andrew Welsh, Director of Medical Devices Recruitment and Scientific Recruitment Specialists Newton Colmore, on 0121 268 2240 or make an application, and one of our team at Newton Colmore will contact you. Please note we will not be able to discuss the role specifics until we have a copy of your CV.....Read more...
Software Architect .NET - Upper Austria (Innviertel region) / Hybrid
(Software Architect, Senior .NET Developer, .NET Software Engineer, Softwareentwickler, Entwickler, C#, WPF, Entity Framework, MS SQL Server, MVVM, dependency injection, SOLID principles, MS Visual Studio, Programmer, Software Architect, Softwareentwickler, Entwickler, .NET Software Engineer, .NET Developer)
My client are one of the fastest growing Software Companies in Austria. Established in the Software Solutions market for over 40 years, they are seeking ambitious Software Architect .NET to architect a new core software product that will revolutionise the industry.
Working in an Agile Scrum team, the successful candidate will be expected to be heavily involved in the development and implementation of strategic architectural decisions, introducing new methods and technologies and evaluating new technologies and tools, as well as conducting proof-of-concepts.
Strong expertise as in software architecture is required, as is a deep knowledge of .NET, specifically C#, WPF and Entity Framework. Knowledge of MVVM, dependency injection, and SOLID principles is expected and excellent communication skills are a must have.
This is an excellent opportunity for a Software Architect .NET to work within a challenging and supportive environment. Top performers can expect to receive their first promotion (and pay rise) within 6 months.
To apply for these positions please send your CV to Nathan Warner at Noir.
Salary: €6k-€6.5k per month (14 months, so €84k-€91k per annum) + Bonus + Pension + Benefits
Location: Upper Austria (Innviertel region) - Hybrid - once a week in the office
Languages: C1 German & fluent English required
Applicants must have the right to work in Austria.
Noir continues to be the leading Microsoft recruitment agency; we can help you make the right career decisions!
NOIRAUSTRIAREC
NOIREUROPEREC
NOIREURNET....Read more...
Senior .NET Developer - Luxembourg / Hybrid
(Senior .NET Developer, .NET Software Engineer, .NET Architect, Technical Architect, Solutions Architect, API Architect, .NET, C#, .NET Core, ASP.NET Core, API architecture, solution architecture, API design, distributed systems, microservices, DDD, modern integration patterns, Senior .NET Developer, .NET Software Engineer, .NET Architect, Technical Architect, Solutions Architect, API Architect, Urgent)
Our client is one of the fastest growing software companies in the world. This pioneering, innovative, global leader is driving cutting edge solutions, using AI-powered development and are looking for a Senior .NET Developer and API Integration Specialist to collaborate with the rest of the back-end team. In this role, you will work closely with software vendors and enterprise clients, leading discovery sessions, developing integration plans, and translating client needs into effective technical designs. Your role will be to enhance their API strategy and act as a specialist technical advisor.
The successful candidate will be an expert in .NET, C#, ASP.NET Core and API design and have had exposure to Microservices, DDD and modern integration patterns. Any API architecture or solution architecture knowledge would be a significant advantage. Excellent communication skills and the ability to communicate technical concepts to external stakeholders and lead technical discussions in German is essential, as is fluent English.
Our client is a company people love to work for, who treat their employees like family and are looking for ambitious and pro-active Senior .NET Developers to join a talented and established team. If you would like to explore the possibility of joining their family, please send your CV.
Location: Luxembourg / Hybrid Working
Salary: €70,000 - €90,000 + Bonus + Benefits
Applicants must have the right to work in Luxembourg.
Noir continues to be the leading Microsoft recruitment agency; we can help you make the right career decisions!
NOIRLUXEMBOURGRECSP
NOIRLUXEMBOURGREC
NOIREUROPEREC
....Read more...
Mechanical Engineer (Days Only) – FM Service Provider – Blackfriars, Central London – £53,000 per annum A leading facilities management service provider is seeking an experienced Mechanical Technician to join a prestigious, high-spec commercial office building in the heart of the City of London. This modern, multi-tenant development offers state-of-the-art infrastructure and is ideally located near major financial institutions and excellent transport links. This is a hands-on engineering role, ideal for a technically strong engineer who thrives in a fast-paced, critical environment. You will be fully involved in day-to-day engineering tasks, ensuring the smooth operation of all building services. Working Hours 7:00 AM – 7:00 PM (Days Only - 2s & 3s) Panama Shift Key ResponsibilitiesCarry out Planned Preventative Maintenance (PPM) and reactive works efficiently via the maintenance systemCarry out hands-on maintenance across mechanical and electrical systemsDiagnose and resolve plant faults quickly to minimise downtimeConduct regular quality checks on work, documentation, and housekeeping standardsEnsure availability of critical spare partsMaintain accurate records, reports, and job sheetsPackageUp to £53,000Overtime AvailableCompany pension22 Days holidayBirthdays offGenuine Career progressionExcellent Training - Internal and External CoursesRequirementsFully qualified in Mechanical Engineering (recognised certification) Level 3 RequiredProven experience in commercial building maintenance, ideally within critical environments (e.g. banking, corporate, or blue-chip sites)Strong mechanical knowledge with multi-skilled capabilitiesExperience working with HVAC, chillers, pumps, AHUs, and building plant systemsExcellent communication skillsIf you are interested please send your Cv to Dan Barber at Cbw Staffing Solutions. ....Read more...
Mobile Electrical Maintenance Engineer – FM Service Provider – Cardiff - 3 days static / 2 days mobile CBW Staffing Solutions is currently recruiting for a Mobile Electrical Maintenance Engineer to join a leading Facilities Maintenance company covering a portfolio of commercial buildings within the Cardiff area.This is an excellent opportunity for a qualified Electrical Maintenance Engineer looking to join an established business offering long-term stability, ongoing training, and genuine career progression. The successful candidate will carry out planned preventative and reactive maintenance across a diverse portfolio of sites, ensuring all electrical systems remain safe, compliant, and fully operational while delivering a high standard of customer service.In return, the company is offering a competitive salary of up to £40,000, Company Vehicle, excellent benefits, overtime opportunities, and the chance to work on a secure, long-term maintenance contract. This is a Monday - Friday role working 3 days a week on 1 main site and 2 days a week mobile in the Cardiff area. Package will include:Salary up to £40,000Company Van & Fuel Card25 Days Holiday + Bank HolidaysOvertime AvailableNo Call outCompany PensionOngoing Training & DevelopmentKey Duties & Responsibilities:Carry out planned preventative maintenance (PPM) and reactive electrical maintenance across a portfolio of infrastructure sites.Diagnose and repair faults on lighting, power distribution, and electrical building services systems.Complete lighting maintenance, including lamp replacements, ballast changes, and lighting control systems.Carry out emergency lighting testing and associated remedial works.Install new sockets, lighting circuits, containment, and complete minor electrical installation works.Maintain electrical control panels, transformers, and star-delta starters.Respond promptly to reactive maintenance requests and complete repairs efficiently.Carry out basic general building maintenance where required.Ensure all work complies with current Health & Safety legislation and company procedures.Complete service reports and maintain accurate maintenance records.Liaise professionally with clients, site representatives, and subcontractors to ensure a high level of service delivery.Requirements:City & Guilds / NVQ Level 2 & 3 in Electrical Installation (or equivalent)18th Edition Wiring RegulationsProven experience within commercial building maintenance or facilities managementStrong electrical fault-finding and diagnostic skillsGood knowledge of electrical building servicesFull UK Driving LicenceWillingness to participate in the call-out rota and work overtime when requiredMust be able to provide copies of all relevant trade certificates....Read more...
Plumber
£95,000 - £150,000+ Earning Potential + Premium Brand + Training & Support + Uncapped Potential + Franchise Opportunity
London and Surrounding Areas
Fantastic opportunity for an experienced Plumber looking to take their career and earning potential to the very highest level. Operate as a Franchise Partner with a highly successful home services business where the expectation is to deliver a Rolls-Royce standard of service to every customer. With the potential to earn in excess of £150,000 per year, you’ll have the backing of an established brand, proven systems, training and ongoing support while building something special for yourself!
We’re looking for an experienced Plumber who takes genuine pride in their work and is driven to become the best version of themselves. This opportunity is all about ambition, professionalism, personal development and consistently providing an exceptional customer experience. If you want to operate at the highest level, take control of your earnings and be rewarded for the standards you deliver, apply today.
Your Role As A Plumber Will Include:
£150,000+ earning potential
Established and highly successful brand
Proven systems and processes
Training and ongoing support
Huge potential for personal development
Build something successful for yourself
Deliver a genuinely premium plumbing service
As A Plumber You Will Need:
Qualified and experienced Plumber
Strong domestic plumbing experience
Excellent fault-finding and problem-solving ability
Excellent standards of workmanship
First-class customer service
Ambitious and driven mindset
Professional and reliable
Committed to consistently delivering the highest standards
Living in or commutable to London (all areas considered)
Keywords: Plumber, Plumbing Engineer, Domestic Plumber, Maintenance Plumber, Service Plumber, Plumbing & Heating Engineer, Heating Engineer, Bathroom Fitter, NVQ Plumbing, City & Guilds Plumbing, Domestic Plumbing, Reactive Maintenance, Plumbing Maintenance, London, Hertfordshire, Surrey, Kent, Reading, Slough, Essex, Romford, Home Counties, Enfield, Barnet, Wembley, Morden, Dartford, Chelmsford....Read more...
FPGA Firmware Electronics Engineer – Defence – Cambridge
We are currently seeking an experience Electronics Engineer to join a multidisciplinary team of engineers that assist in the development of brand-new technologies for the Defence sector, with a focus on defence rather than offence.
These technologies can encompass communications, sensors, detection, and other complex technologies within the Defence sector. As you will be working on defence projects, you will need to be able to obtain (or already hold) security clearance.
As a smaller defence company, there is more flexibility in the projects you get to work on. Collaboration with other teams and external groups mean that you will have the opportunity to develop your skills and continuously learn new things while inventing exciting technologies.
Experience with FPGA Firmware, such as VHDL or Verilog, will be ideal. If you already work in the Defence sector, this would be advantageous, however, we are more than happy to consider candidates from other sectors.
With the growth of this company, future career development will be available for those who want to advance their career. As the company are looking for a few people in this team, we are also open to individuals who want to focus on their job while maintaining an interest in new technologies and fields.
It is expected that you would hold a degree in an electronics engineering field that has led you into a career in electronics engineering, with exposure to FPGA exposure.
Due to the varied nature in this role, I anticipate a lot of interest from individuals who want to continue developing their skills while finding the work interesting. If you are interested in this role, I suggest submitting an application now or avoid missing out.
If you want to work on complex, industry-defining technologies while being offered an excellent starting salary, salary reviews, bonuses, a pension, free lunches, and other outstanding benefits, I recommend submitting an application now or avoid missing out.
For more general information, please feel free to call Andrew Welsh, Director of Medical Devices Recruitment and Scientific Recruitment Specialists Newton Colmore, on 0121 268 2240, or submit an application, and one of our team members at Newton Colmore will contact you. Please note we will not be able to discuss the role specifics until we have a copy of your CV.....Read more...
We are looking for a Senior RF Engineer to lead the design, development, and testing of RF, microwave, and antenna systems used in advanced electronic products.
Key responsibilities
Lead RF and antenna design projects (including modules and sub-contracted work)
Design and optimise microwave PCB layouts and RF systems
Perform RF component selection and system-level analysis
Support antenna design, modelling, testing, and validation
Troubleshoot RF production issues and perform root cause analysis
Work closely with manufacturing, supply chain, quality, and customers
Ensure engineering standards, documentation, and procedures are followed
Key Skills
RF PCB design at microwave frequencies
Strong knowledge of RF components (amplifiers, filters, mixers, PLLs)
RF system design (cascade analysis)
Experience with RF test equipment (VNA, spectrum analysers)
Antenna design knowledge (including array and printed antennas)
Altium and RF simulation tools
Radar or communications background
MATLAB and Python for test automation ....Read more...
