I am searching for an experienced Production Engineer for an internationally respected and very successful manufacturing business based near to Exeter.
Reporting to the Lean Engineering Manager, you will be responsible for supporting production throughout the in-house metal shop and assembly areas alongside the external supply chain.
The role is focussing on the support of existing product ranges and the introduction of new products. You will help to development supporting systems to improve quality and sustainability of our client’s product range. The role will include the definition and delivery of strategic targets across the business.
Working within the Production Engineering and Lean Team, you will ensure successful identification and implementation of best manufacturing practise. You will help review the suitability for manufacture of new products and maintain quality that exceeds customer expectation.
Duties include:
Identify and present ideas for improving production in order to improve profitability, quality, throughput and H&S.
Conduct feasibility studies on continuous improvement ideas generated from within Production, gained sign off and implement those projects.
Work closely with the Lean team to develop and implement best practices, routines and solutions to improve production rates, quality and output.
Support the Production Team in evaluating the strategic development of on-site manufacturing to achieve business goals.
Assist in the production of operating instructions.
Assist in the coordination and management of new products internally and externally to support the manufacturing team where required.
Produce written reports where required.
You will undertake continuous training and development.
Ensure adherence in accordance with any health, safety and environmental policies and procedures to ensure the safety and wellbeing of staff and visitors.
Participate in new product reviews to ensure that only the most production efficient designs are released into production.
Participate in Change Request reviews to ensure that the best and most cost-efficient solutions are adopted without having a negative impact on safety or quality standards.
Develop and maintain strong relationships with internal stakeholders to ensure optimal performance.
Work as part of the production engineering team to share ideas and improve operation, recommending, supporting, and implementing continuous improvement activities and process and procedure improvements to optimise results and improve quality of delivery, in line with quality standards requirements.
Stay current and up to date on any technology changes that may affect manufacturing and advise of any impact.
Liaise and communicate with other departments, suppliers, and other service providers as and when required.
Required skills and attributes:
Excellent people skills.
Ability to manage a variety of cross-functional team members.
Excellent written and verbal skills.
Excellent organizational and follow-up skills.
Competent in problem solving, planning and decision making.
Commercially and financially aware.
Qualifications and experience:
HNC or HND or equivalent in an engineering discipline, as a minimum.
Experience of implementing manufacturing improvements and continuous improvement projects within batch manufacturing businesses.
Experience of working with sheet metal fabrication with an understanding of related manufacturing processes and limitations.
Experience of quality management including proven use of DFMEA & PFMEA.
Project management experience and a track record of identifying and successfully implementing change.
Previous involvement in new product introductions would be beneficial.
Experience of Value Analysis and Value Engineering techniques, Root Cause Analysis, Value Stream Mapping and 8D would be beneficial but is NOT a prerequisite.
The role comes with an excellent benefits package and once probation has been successfully completed some home-based working is available with prior consent with management.
The benefits include, 32 days holiday (including bank holidays), flexitime, competitive salary, pension, loyalty bonus, life assurance, free eye tests, training, rewards hub, hybrid-working and much more!
To be considered for this role you MUST have the Right to Work in the UK long-term without company sponsorship. You will also need to be based near to Exeter / East Devon, or you will be able to relocate to the area. Our client will 100% consider candidates who wish to relocate from within the UK to take up the position.
KEYWORDSProduction Engineer, Lean, New Products, H&S, Continuous Improvement, Production, Manufacturing, Engineering, DFMEA, PFMEA, HNC, HND, Batch Manufacturing, Sheet Metal Fabrication, Value Analysis, Value Engineering, Root Cause Analysis, Value Stream Mapping, 8D
Please note that due to a high level of applications, we can only respond to applicants whose skills and qualifications are suitable for this position. No terminology in this advert is intended to discriminate against any of the protected characteristics that fall under the Equality Act 2010.
Bowerford Associates Ltd is acting as an Employment Agency in relation to this vacancy.....Read more...
Fantastic opportunity to work in an engineering company who design and manufacture ultra-high-quality brake, clutch and other automotive components to Motorsport, top OEM and Special Vehicle markets.
This is an amazing opportunity to learn to become a multi-skilled manufacturing engineer.
You will get the opportunity to work in the following departments:
Design Engineering:
You’ll get an insight into using computer software such as Solidworks 3D CAD software, to produce accurate solid models which have been requested from our customers
Our Design Engineers ensure our components are as strong, light and efficient as possible, through accurate design of parts. Design Engineers work in an office environment designing components on computer software
Research & Development:
To stand still is to go backwards, so in research and development we look into the future, developing new ideas, patenting new processes and ensuring the company is always ahead of the competition
As an R&D Technician or Engineer, you will work in the R&D lab carrying out testing of parts, as well as using a computer to record data
Planning:
You’ll see first-hand how highly organised our planning strategy is. Planning is used to manage the coordination of production workflow, and developing and reviewing production plans with other departments
The manufacturing department is led by the work-to plan that the Planning team put together
As a Planner you will be based in an office using a computer
You will need to speak to other departments to ensure that the plan will work and your customers are updated with any changes as this will effect the delivery dates of components made
Quality Engineering (Metrology)
Quality is where we check each component is visibly correct before it is then compared to a mathematically perfect specification. Any part that is found to be outside these requirements that cannot be easily corrected is simply discarded and the whole process starts again
Quality Engineers and Technicians work in a Quality Lab, where there is a mix of hands-on work such as measuring components, and computer-based work
Production Engineering:
Production Engineering is made up of a team of Production Engineers who support the machining and assembly departments
The Production Engineers will provide technical expertise, help with problems on the machines, diagnose and solve problems, ensuring that the machines that make our products are working smoothly and efficiently. We have a wide variety of CNC machines with Fanuc and Heidenhain controls which are operated by our highly skilled CNC setter operators
Production Engineers work on the shop floor and also at a desk with a computer
Training:Together with invaluable commercial and practical experience, you’ll gain several academic and vocational qualifications throughout your time with your employer and Make UK, which are fully paid for, including:
Advanced Manufacturing Engineering Practical Foundation Training – in year 1, in 6 week blocks to include 4 weeks at Make UK and 2 weeks in company
Advanced Manufacturing Engineering Workplace
Competence Training - in years 2 to 4 in company
Level 3 BTEC Diploma in Advanced Manufacturing Engineering Development Knowledge - in Years 1, 2 & 3 on block release to Make UK
In house training in line with your requirements
Further qualifications deemed necessary by your employer
On completion of your studies, you will achieve your full apprenticeship certification that will prove competence as a Level 3 Engineering and Manufacturing Support Technician
Training Outcome:
Our Alcon Apprentices, once they have completed a 4 year apprenticeship will become fully qualified Technicians or Engineers in their specialism of engineering
We look to promote from within and some of our Senior Managers today came through the Alcon Apprenticeship Programme
If the management route is not for you, then becoming an expert in your line of work is where we aim to get you
Employer Description:Alcon is a designer and manufacturer of ultra-high quality, low volume brake, clutch and other automotive components. We operate in all areas of the industry around the world. Our clients and their requirements are as wide ranging as the products we supply. From tiny brake-by-wire controllers for Formula E racing cars to calipers required to stop 35 tonnes of armoured vehicle, the only factor common to everything we do is our no-compromise approach to engineering excellence.Working Hours :Monday - Friday, 08:00 - 17:00Skills: Communication skills,Attention to detail,Organisation skills,Problem solving skills,Presentation skills,Administrative skills,Number skills,Analytical skills,Logical,Team working,Creative,Initiative,Non judgemental,Patience....Read more...
.NET Developer - Fastest Growing Social Media Firm – York
(Tech stack: .NET Developer, .NET 10.0, ASP.NET Core, C# 14, Azure DevOps, Agile, Blazor, JavaScript, React, Multithreading, RESTful, ML.NET, Azure AI, Programmer, Full Stack Engineer, Architect, .NET Developer)
Our client is on a quest to transform how people discover, view and share content by combining the beauty and ease of print with the power of social media. Their key management team comprises of former top performers from Google, Apple, MSFT, NetFlix, Yahoo, Facebook, BBC Worldwide and Sony. Having raised over £300 million from well respected investors they have recently opened new offices in the UK and are on the lookout for the very best .NET Developer.
.NET Developer applicants should be experienced in: .NET, .NET Core, C# and Azure SQL. You should have a strong grasp of object orientated (OO) development principles. Our client can provide you with industry recognized training in: .NET 10.0, C# 14, Azure DevOps, Agile, Blazor, JavaScript, React, Multithreading, RESTful, ML.NET, Azure AI, Bootstrap and MongoDB.
Our client has a flat organization, which means that they believe great ideas can come from anywhere and anyone. From the beginning they’ve been uncompromising in creating a culture that inspires great work and values the health and balanced lives of their staff.
If you are as excited as they are about building the first social magazine and transforming the social media experience, then apply without delay!
Location: York, Yorkshire, UK / Remote Working
Salary: £45,000 - £65,000 + Bonus + Pension + Benefits
Applicants must be based in the UK and have the right to work in the UK even though remote working is available.
Noir continues to be the leading Microsoft recruitment agency; we can help you make the right career decisions!
NOIRUKNETRECNOIRUKREC
NC/NET/YORET....Read more...
.NET Developer - Europe’s Largest Radio Station Group – Derby, Derbyshire
(Tech stack: .NET Developer, .NET 10.0, ASP.NET Core, C# 14, .NET MAUI, ML.NET, Azure AI, GitHub Copilot, Docker, Kubernetes, .NET Aspire, CI/CD, HTML Living Standard, CSS Living Standard, Programmer, Full Stack Engineer, Architect, .NET Developer)
Our client is Europe's largest and most profitable commercial radio group. In order to keep pace with the new digital technologies being developed, they are transforming their stations into interactive brands that can operate across multiple platforms such as online, digital TV and mobile. As such we are seeking .NET Developer to join their dynamic .NET / C# team of high flying individuals.
.NET Developer applicants should have a skill set that encompasses: .NET, .NET Core, C# and Azure SQL. Our client can provide you with industry recognised training in: .NET 10.0, ASP.NET Core, C# 14, .NET MAUI, ML.NET, Azure AI, GitHub Copilot, Docker, Kubernetes, .NET Aspire, CI/CD, HTML Living Standard, CSS Living Standard and Azure Cosmos DB.
This is an exciting opportunity to work on complex enterprise level .NET / C# software development projects. Our client offers a structured career progression programme, industry recognized training, flexible working hours and home working. These positions are urgent, as such our client guarantees to provide feedback on CV's within 24 hours of submission and complete the interview process within 1 week.
Location: Derby, Derbyshire, UK / Remote Working
Salary: £45,00 - £55,000 + Bonus + Pension + Benefits
Applicants must be based in the UK and have the right to work in the UK even though remote working is available.
Noir continues to be the leading Microsoft recruitment agency; we can help you make the right career decisions!
NOIRUKNETRECNOIRUKREC
NC/SB/DERET....Read more...
.NET Developer - Fastest Growing Social Media Firm – St Albans, Hertfordshire
(Tech stack: .NET Developer, .NET 10.0, ASP.NET Core, C# 14, Azure DevOps, Agile, Blazor, JavaScript, React, Multithreading, RESTful, ML.NET, Azure AI, Programmer, Full Stack Engineer, Architect, .NET Developer)
Our client is on a quest to transform how people discover, view and share content by combining the beauty and ease of print with the power of social media. Their key management team comprises of former top performers from Google, Apple, MSFT, NetFlix, Yahoo, Facebook, BBC Worldwide and Sony. Having raised over £300 million from well respected investors they have recently opened new offices in the UK and are on the lookout for the very best .NET Developer.
.NET Developer applicants should be experienced in: .NET, .NET Core, C# and Azure SQL. You should have a strong grasp of object orientated (OO) development principles. Our client can provide you with industry recognized training in: .NET 10.0, C# 14, Azure DevOps, Agile, Blazor, JavaScript, React, Multithreading, RESTful, ML.NET, Azure AI, Bootstrap and MongoDB.
Our client has a flat organization, which means that they believe great ideas can come from anywhere and anyone. From the beginning they’ve been uncompromising in creating a culture that inspires great work and values the health and balanced lives of their staff.
If you are as excited as they are about building the first social magazine and transforming the social media experience, then apply without delay!
Location: St Albans, Hertfordshire, UK / Remote Working
Salary: £70,000 - £105,000 + Bonus + Pension + Benefits
Applicants must be based in the UK and have the right to work in the UK even though remote working is available.
Noir continues to be the leading Microsoft recruitment agency; we can help you make the right career decisions!
NOIRUKNETRECNOIRUKREC
NC/SB/STALET....Read more...
.NET Developer - Fastest Growing Social Media Firm – Glasgow
(Tech stack: .NET Developer, .NET 10.0, ASP.NET Core, C# 14, Azure DevOps, Agile, Blazor, JavaScript, React, Multithreading, RESTful, ML.NET, Azure AI, Programmer, Full Stack Engineer, Architect, .NET Developer)
Our client is on a quest to transform how people discover, view and share content by combining the beauty and ease of print with the power of social media. Their key management team comprises of former top performers from Google, Apple, MSFT, NetFlix, Yahoo, Facebook, BBC Worldwide and Sony. Having raised over £300 million from well respected investors they have recently opened new offices in the UK and are on the lookout for the very best .NET Developer.
.NET Developer applicants should be experienced in: .NET, .NET Core, C# and Azure SQL. You should have a strong grasp of object orientated (OO) development principles. Our client can provide you with industry recognized training in: .NET 10.0, C# 14, Azure DevOps, Agile, Blazor, JavaScript, React, Multithreading, RESTful, ML.NET, Azure AI, Bootstrap and MongoDB.
Our client has a flat organization, which means that they believe great ideas can come from anywhere and anyone. From the beginning they’ve been uncompromising in creating a culture that inspires great work and values the health and balanced lives of their staff.
If you are as excited as they are about building the first social magazine and transforming the social media experience, then apply without delay!
Location: Glasgow, Scotland, UK / Remote Working
Salary: £45,000 - £65,000 + Bonus + Pension + Benefits
Applicants must be based in the UK and have the right to work in the UK even though remote working is available.
Noir continues to be the leading Microsoft recruitment agency; we can help you make the right career decisions!
NOIRUKNETRECNOIRUKREC
NC/NET/GLAET....Read more...
As an Engineering Apprentice, you’ll work with experienced engineers to:
Maintain and repair machinery on our production lines
Diagnose mechanical, electrical and automation faults
Carry out preventative maintenance
Learn how food production equipment works and how to keep it running efficiently
Support continuous improvement across our bakery operations
Training:About the Training Programme
Your apprenticeship combines hands‑on engineering experience at our sites with technical training delivered by MGTS (Midland Group Training Services).
Residential Training at MGTS (Coventry).
Your technical training will include residential blocks at MGTS, with accommodation fully funded by Lantmännen Unibake:
22 weeks in Year 1
14 weeks in Year 2
6 weeks in Year 3
This industry‑leading training will equip you with essential mechanical, electrical and automation skills.Training Outcome:After completing your apprenticeship, you could progress to a fully qualified Maintenance Engineer, with opportunities to specialise in:
Mechanical
Electrical
Automation
You’ll also have access to ongoing training, development and the chance to work on innovative engineering projects in a growing industry. Employer Description:Lantmännen Unibake supplies bakery products to thousands of supermarkets and restaurants across Europe on our mission towards billions of smiling tummies! If you’re passionate about food, curious about how things work, and want a hands‑on career in engineering, this could be the perfect opportunity for you.Working Hours :Monday to Friday, 9am to 5pm.Skills: Communication skills,IT skills,Attention to detail,Organisation skills,Problem solving skills,Analytical skills,Logical....Read more...
FM Technical Supervisor - Peterborough - Global Facilities Management Organisation: Prison Service CBW Staffing Solutions are seeking an experienced Technical Supervisor with a strong Mechanical or Electrical bias to join our client’s team based in Peterborough.This is an exciting opportunity to take on an exciting role in ensuring the seamless operation, maintenance and compliance of all FM requirements as well as managing a team of approx. 10 direct reports. Package:Competitive salary up to £44,000 per annum (depending on experience) Core hours are Monday - Friday (40 hours per week)25 days annual leave plus bank holidaysFree meals provided whilst on shift!Access to staff gym and free parkingGenerous workplace pension schemeTraining, development & progression opportunities Responsibilities:Oversee and coordinate planned and reactive maintenance of all M&E systems, ensuring compliance with statutory and regulatory requirementsProducing and reviewing RAMS/SOP’s for routine maintenance tasksLead a team of 10 engineers and contractors, providing technical support and guidanceLiaise with the client, site management, and external contractors to ensure efficient service deliveryEnsure health and safety protocols are followed, maintaining a safe working environmentManage asset performance, energy efficiency initiatives and continuous improvement projectsMaintain accurate records, documentation, and compliance reports Requirements:Proven experience in a similar Technical Supervisor or Lead Engineer role within the Facilities Management industryStrong M&E knowledge with relevant qualifications (e.g., City & Guilds, NVQ, or equivalent in Electrical/Mechanical Engineering)Experience working in a critical environment is highly desirable Interested? Apply with a full & up to date CV or contact Aaron Rutter at CBW Staffing Solutions.....Read more...
.NET Developer, .NET 10.0, C# 14, Agile - Margate
(Tech stack: .NET Developer, .NET 10.0, ASP.NET Core, C# 14, Azure, Angular 21, Vue.js, TypeScript, Multithreading, RESTful, ASP.NET Core Web API, EF Core 10.0, Programmer, Full Stack Engineer, Architect, .NET Developer)
Our client is a global innovator who builds software products and apps that are defining the way individuals and teams work today. They make it easy for users and to achieve their personal and professional goals and to ultimately be ‘a better you’ at home, in the office, and everywhere in between. With nearly 500 employees and growing, they are looking for .NET Developer to join their global team!
You will be working on the development of a new generation of .NET / C# software products; helping the firm transform its inspiration into reality. We are keen to hear from .NET Developer candidates with a good grasp of: .NET, .NET Core, C# and Azure SQL. Our client will give you the opportunity to work on enterprise level software development projects and provide training into: .NET 10.0, ASP.NET Core, C# 14, Azure, Angular 21, Vue.js, TypeScript, Multithreading, RESTful, ASP.NET Core Web API, EF Core 10.0, Solid, DRY, LINQ and MongoDB.
The company is quick to recognize talent and keen to nurture and develop it, as such your career with the company will go as far as your ambitions take you. The CTO of their Asian operations started life as a Senior .NET Developer in their San Francisco offices only 2 years ago!
All employees are eligible to visit and work from their international offices twice a year. The company will cover the cost of travel and lodging for a two week period. The .NET Developer positions come with the following benefits:
Bonus: 10 – 20%.
Company pension.
Private medical healthcare.
Once a year £1,000 holiday subsidy.
Catered lunches, snacks and beverages.
Annual subscription to the Guardian.
Fun and entertainment: Tea Time Tuesdays, Ice Coffee Thursdays and Beer O’Clock Fridays!
Location: Margate, Kent, UK / Remote Working
Salary: £40,000 - £55,000 + Bonus + Pension + Benefits
Applicants must be based in the UK and have the right to work in the UK even though remote working is available.
Noir continues to be the leading Microsoft recruitment agency; we can help you make the right career decisions!
NOIRUKNETRECNOIRUKREC
NC/RG/MARET....Read more...
.NET Developer, .NET 10.0, C# 14, Agile - Hull
(Tech stack: .NET Developer, .NET 10.0, ASP.NET Core, C# 14, Azure, Angular 21, Vue.js, TypeScript, Multithreading, RESTful, ASP.NET Core Web API, EF Core 10.0, Programmer, Full Stack Engineer, Architect, .NET Developer)
Our client is a global innovator who builds software products and apps that are defining the way individuals and teams work today. They make it easy for users and to achieve their personal and professional goals and to ultimately be ‘a better you’ at home, in the office, and everywhere in between. With nearly 500 employees and growing, they are looking for .NET Developer to join their global team!
You will be working on the development of a new generation of .NET / C# software products; helping the firm transform its inspiration into reality. We are keen to hear from .NET Developer candidates with a good grasp of: .NET, .NET Core, C# and Azure SQL. Our client will give you the opportunity to work on enterprise level software development projects and provide training into: .NET 10.0, ASP.NET Core, C# 14, Azure, Angular 21, Vue.js, TypeScript, Multithreading, RESTful, ASP.NET Core Web API, EF Core 10.0, Solid, DRY, LINQ and MongoDB.
The company is quick to recognize talent and keen to nurture and develop it, as such your career with the company will go as far as your ambitions take you. The CTO of their Asian operations started life as a Senior .NET Developer in their San Francisco offices only 2 years ago!
All employees are eligible to visit and work from their international offices twice a year. The company will cover the cost of travel and lodging for a two week period. The .NET Developer positions come with the following benefits:
Bonus: 10 – 20%.
Company pension.
Private medical healthcare.
Once a year £1,000 holiday subsidy.
Catered lunches, snacks and beverages.
Annual subscription to the Guardian.
Fun and entertainment: Tea Time Tuesdays, Ice Coffee Thursdays and Beer O’Clock Fridays!
Location: Hull, Yorkshire, UK / Remote Working
Salary: £40,000 - £55,000 + Bonus + Pension + Benefits
Applicants must be based in the UK and have the right to work in the UK even though remote working is available.
Noir continues to be the leading Microsoft recruitment agency; we can help you make the right career decisions!
NOIRUKNETRECNOIRUKREC
NC/NET/HULET....Read more...
Duties will include, but will not be limited to:
Hands-on installation and commissioning of electrical components and systems, including motor drives, 3-phase and DC systems. Fully competent at using primary and secondary test equipment.
Carry out diagnostics and problem-solving for electrical and instrument systems.
Assist the remote software engineer with configuration and fault diagnosis on PLC systems.
Maintain plant equipment for clients such as pumps, mixers, motors, electrical and control systems/SCADA, heat exchangers, gas storage, sensors, alarms, valves, safety systems etc.
Fault finding and maintaining mechanical assets, including pumps, gearboxes, valves etc.
Carry out pre-planned and reactive maintenance on a range of mechanical equipment.
Undertake measures to improve the plant reliability, efficiency and performance, always in a safe and efficient manner.
Training:
The Apprentice will work towards their Apprenticeship Standard in Level 3 Engineering Maintenance Technician.
The successful candidate will be assigned a dedicated assessor who will provide support and guidance throughout the course.
This is a Day Release programme which means you will attend Lincoln/Newark College, 1 day per week, term time only. This will fall within your contracted working hours.
Training Outcome:Upon completing their apprenticeship, individuals can look forward to a range of promising career prospects within the renewable energy sector. Successful Apprentice Technicians often progress into full-time roles such as Plant Technician, Maintenance Engineer, or Process Operator, with opportunities to specialise in areas like plant optimisation or environmental compliance. Typically, Plant Technicians can expect to earn between £25,000 and £32,000 per annum. Maintenance Engineers in this sector often command salaries ranging from £30,000 to £40,000, while Process Operators usually earn between £22,000 and £30,000 per year. Higher earnings may be possible with additional qualifications, experience, or supervisory responsibilities, especially in larger facilities or those employing advanced technology. With further experience and continued professional development, there is potential to advance into supervisory or managerial positions, or to explore roles in project management and technical consultancy. For managerial positions within anaerobic digestion, such as Plant Manager or Operations Manager, salaries generally range from £40,000 to £60,000 per annum, with the potential to exceed this in senior or multi-site roles. Project Managers overseeing new facility construction or upgrades can typically expect earnings between £45,000 and £65,000, depending on project scale and complexity. Technical consultants specialising in anaerobic digestion may command an annual package from £45,000 up to £75,000, reflecting their expertise and industry demand. The growing emphasis on sustainable energy ensures that skilled professionals in this field will remain in high demand, both in the UK and internationally.Employer Description:Anaergia is a global leader in anaerobic digestion and organics recovery, recognised by the Anaerobic Digestion and Bioresources Association (ADBA) for its innovative waste-to-energy solutions. Anaergia specialises in anaerobic digestion (AD), organics recovery, and waste conversion. The company provides end-to-end solutions for converting various waste streams, including agricultural, food, and municipal solid waste (MSW), into renewable energy, high-quality fertiliser, and recycled water. Anaergia also offers services ranging from equipment supply to full project design, financing, construction, and plant operation. Anaergia has been active in the UK for over a decade, with 13 anaerobic digestion plants installed by the end of 2020. The company provides engineering, service, and maintenance support for AD plants, including installation of organics recovery systems, digestate separators, mixers, and specialised pump systems. This is the team you would be working with. Anaergia also focuses on upgrading underperforming facilities to improve efficiency and profitability for clients.Working Hours :A normal day may be 8am-5pm, but some days may run over, depending on the job. These hours will be given back on another day.Skills: Communication skills,IT skills,Attention to detail,Organisation skills,Customer care skills,Problem solving skills,Number skills,Analytical skills,Logical,Team working,Initiative,Non judgemental,Patience,Physical fitness....Read more...
£27,800 starting, permanent role, travel benefits, wellness programmes, ongoing training and development, enhanced company pension plan, Mon-Fri no weekend work, sick pay scheme, free onsite parkingThis Breakdown Coordinator, plays a key role in coordinating maintenance, repair, and breakdown activities to ensure efficient service delivery and high levels of customer satisfaction.Acting as a central point of contact out of our Elland site, the breakdown coordinator role involves managing incoming service requests, allocating Field Service Engineers, and maintaining accurate records across internal systems.Responsibilities of our Breakdown Coordinator
To take customer calls and log repair notifications.
To allocate appropriate Field Service Engineer response to meet customer requirements.
Liaise with UK service supervisor and Service Manager regarding any issues that may arise.
Keep customers updated on the reported job progress.
Ensure all jobs are entered onto the appropriate in-house computer system.
To reschedule jobs and resources according to emerging customer needs and resource availability.
Undertake any other duties consistent with the purpose of this job or to support the needs of the business
What were looking for in our Breakdown Coordinator
Great time management and ability to prioritise workload
Great communication skills
Ability to communicate with internal and external stakeholders
Attention to detail
Ideally service or breakdown coordinator experience
Benefits of our Breakdown Coordinator role
Secure, permanent role
Employee health and wellness programmes
Enhanced pension plan
Sick pay scheme
Clear progression routes and support from management
If you are interested in this breakdown coordinator role, please apply now or contact Grace at E3 Recruitment
....Read more...
Our client is an international multi-service provider, offering textile, hygiene and facility service solutions across multiple sectors operating across the UK.
Job Role & Key Responsibilities:
The Maintenance Engineer will support all on-site engineering and maintenance activities, reporting directly to the Engineering Manager. The role focuses on ensuring plant, equipment, and infrastructure operate safely, efficiently, and with minimal downtime.
Key Responsibilities:
Carry out planned preventative maintenance (PPM) and respond to breakdowns promptly
Support equipment updates, new installations, and infrastructure improvements
Ensure all work complies with site health & safety procedures and engineering standards
Work closely with engineers on alternating shifts to ensure effective daily handovers
Diagnose faults and complete repairs safely while keeping production teams informed
Contribute to continuous improvement initiatives across plant and machinery
Identify recurring issues and assist in implementing long-term solutions
Report incidents, near misses, and hazards in line with safety policies
Maintain clear communication with production teams and engineering colleagues
The Ideal Candidate will have:
A recognised engineering qualification (electrical)
Apprenticeship background with multi-skilled electrical experience
Strong fault-finding and repair capability across plant and production equipment
Good working knowledge of health & safety standards
Clear verbal and written communication skills in English
Desirable Skills:
Electrical installation and maintenance experience (18th Edition advantageous)
Electronic fault-finding to component level
Experience with pneumatics, hydraulics, and steam systems
Benefits Include:
Salary of £48,000
Double days / rotating shift pattern
Structured engineering environment with ongoing development
If you are interested in this exciting opportunity, please get in touch with us or apply below....Read more...
.NET Developer, CMS, Sitecore, Optimizely, Umbraco – Remote
(Tech stack: .NET Developer, CMS, Sitecore, Optimizely, Umbraco, .NET 10.0, C# 14, Angular 21, Agile, Programmer, Full Stack Engineer, Architect, .NET Developer)
Our client is a leading digital agency powerhouse, delivering transformative online experiences for some of the most recognised brands across Europe. Renowned for blending creativity with cutting-edge technology, they have built an unrivalled reputation for crafting innovative, scalable .NET-driven digital platforms that engage millions of users daily.
As part of their continued growth and a surge in exciting Greenfield digital transformation projects, they are looking to recruit a talented .NET Developer to join their award-winning development team. This is an opportunity to work in a fast-paced agency environment where no two projects are the same—ranging from enterprise CMS-driven websites to complex, high-traffic digital ecosystems.
Working in close collaboration with their own consultants, the .NET Developer will play a key role in delivering sophisticated enterprise-level digital solutions. You will be involved in building dynamic, content-rich platforms and seamless customer journeys using modern .NET technologies.
Applicants should have experience in: .NET, .NET Core, C# and Azure SQL. Candidates should also have exposure to a Content Management System (CMS) such as Sitecore, Optimizely, Umbraco, Alterian, Immediacy, Ektron, Kentico, Sitefinity or DotNetNuke.
Our client is passionate about continuous learning and will provide industry-recognised training in: .NET 10.0, JavaScript, React, Angular 21, Microservices, MongoDB, Vue.js, TypeScript, Azure, AWS, ASP.NET Core Web API, Entity Framework, Node.js, Elasticsearch, Agile, TDD, BDD, Scrum and Kanban.
This is a unique opportunity to join a forward-thinking digital agency that truly values creativity, innovation and its people.
Location: London, UK / Remote Working
Salary: £400 per day – Outside IR35
Applicants must be based in the UK and have the right to work in the UK, even though remote working is available.
Noir continues to be the leading Microsoft recruitment agency; we can help you make the right career decisions!
NOIRUKNETREC NOIRUKREC....Read more...
£27,800 starting, permanent role, travel benefits, wellness programmes, ongoing training and development, enhanced company pension plan, Mon-Fri no weekend work, sick pay scheme, free onsite parkingThis Fleet Coordinator, plays a key role in coordinating maintenance, repair, and breakdown activities to ensure efficient service delivery and high levels of customer satisfaction.Acting as a central point of contact out of our Elland site, the fleet coordinator role involves managing incoming service requests, allocating Field Service Engineers, and maintaining accurate records across internal systems.Responsibilities of our Fleet Coordinator
To take customer calls and log repair notifications.
To allocate appropriate Field Service Engineer response to meet customer requirements.
Liaise with UK service supervisor and Service Manager regarding any issues that may arise.
Keep customers updated on the reported job progress.
Ensure all jobs are entered onto the appropriate in-house computer system.
To reschedule jobs and resources according to emerging customer needs and resource availability.
Undertake any other duties consistent with the purpose of this job or to support the needs of the business
What were looking for in our Fleet Coordinator
Great time management and ability to prioritise workload
Great communication skills
Ability to communicate with internal and external stakeholders
Attention to detail
Ideally service or fleet coordinator experience
Benefits of our Fleet Coordinator role
Secure, permanent role
Employee health and wellness programmes
Enhanced pension plan
Sick pay scheme
Clear progression routes and support from management
If you are interested in this fleet coordinator role, please apply now or contact Grace at E3 Recruitment
....Read more...
Our client is an international multi-service provider, offering textile, hygiene and facility service solutions across multiple sectors operating across the UK.
Job Role & Key Responsibilities:
The Maintenance Engineer will support all on-site engineering and maintenance activities, reporting directly to the Engineering Manager. The role focuses on ensuring plant, equipment, and infrastructure operate safely, efficiently, and with minimal downtime.
Key Responsibilities:
Carry out planned preventative maintenance (PPM) and respond to breakdowns promptly
Support equipment updates, new installations, and infrastructure improvements
Ensure all work complies with site health & safety procedures and engineering standards
Work closely with engineers on alternating shifts to ensure effective daily handovers
Diagnose faults and complete repairs safely while keeping production teams informed
Contribute to continuous improvement initiatives across plant and machinery
Identify recurring issues and assist in implementing long-term solutions
Report incidents, near misses, and hazards in line with safety policies
Maintain clear communication with production teams and engineering colleagues
The Ideal Candidate will have:
A recognised engineering qualification (mechanical or electrical)
Apprenticeship background with multi-skilled electrical and mechanical experience
Strong fault-finding and repair capability across plant and production equipment
Good working knowledge of health & safety standards
Clear verbal and written communication skills in English
Desirable Skills:
Electrical installation and maintenance experience (18th Edition advantageous)
Mechanical fabrication and maintenance skills
Electronic fault-finding to component level
Experience with pneumatics, hydraulics, and steam systems
Benefits Include:
Competitive Salary
Double days / rotating shift pattern
Structured engineering environment with ongoing development
If you are interested in this exciting opportunity, please get in touch with us or apply below....Read more...
Area Sales ManagerTwickenham
£45,000 - £55,000 Basic + Bonus + Family Feel Environment + Stability + Specialist Industry + Market Leader + Private Health care and Dental care + Car + IMMEDIATE START
Are you looking for an Area Sales Manager role with in a company who appreciates and develops their staff? Work for a great hire and service company in a niche industry, who pride themselves on providing a high quality service and valuing their staff.
This recession proof business hires and services a variety of products across the UK supplying to different specialist industries and are well known market leaders. The lucky applicant will work as a Technical Sales Manager and will carry out a variety of work. Work in a place where you can enjoy a great role for a market leader whilst feeling appreciated and treated as more than just a number in a stable industry.
This Area Sales Manager role will include:
* Area Sales Manager role - covering TW/KT postcodes * Full product training * New business when join to build customer base * 50/50 split - account management and new business * Building relationships with customers * Customer visits
The successful Area Sales Manager will have:
* Background as an Area Sales Manager / Account Manager / Business Development Manager or similar * Working with plant/powered access hire is ideal * Live commutable to Twickenham and happy to travel when needed
If interested, please apply or contact Georgia Daly on 07458163040.
Keywords: technical sales manager, sales engineer, technical sales, powered access, plant, mechanical, twickenham, sutton, slough, kingston upon thames, london
This vacancy is being advertised by Future Engineering Recruitment Ltd. The services of Future Engineering Recruitment Ltd are that of an Employment Agency. Future Engineering Recruitment Ltd We can only accept applications from candidates who have a valid legal permit or right to work in the United Kingdom. Potential candidates who do not have this right or permit or are pending an application to obtain this right or permit should not apply as your details will not be processed.....Read more...
Embedded Software Consultant – Defence – Cambridge
A growing and technologically intriguing Defence company, based in Cambridge, is seeking experienced Embedded Software Consultants or Engineers to assist in the development of newly invented technologies that will enhance the defence and safety of the UK.
Your Embedded Software experience should be specifically in Embedded C. Ideally, you will have experience in the Defence sector; however, we are open to candidates from other complex sectors. It will be essential that you could obtain security clearance.
Knowledge of prototyping, using C, C++, MATLAB, or another software language will be highly advantageous.
It is expected that you hold a degree in a software or electronics field, or another field that would have led you into an Embedded Software Engineer role.
We are open to candidates at various levels of experience, ranging from those with a year or two of industry experience to more senior roles. The level of responsibility will depend on your level of experience and skills.
You will be working in a multi-discipline division, including mechanical engineers, software engineers, electronics engineers, physicists, and other industry professionals with whom you will be collaborate and learn from.
Due to the expansion of this team, it is an exciting time to join and will result in career growth and opportunities that arise from the company’s natural growth.
If you want to work on complex, industry-defining technologies while being offered an excellent starting salary, salary reviews, bonus, a pension, free lunches, and other outstanding benefits, I recommend submitting an application now to avoid missing out.
For more general information, please feel free to call Andrew Welsh, Director of Medical Devices Recruitment and Scientific Recruitment Specialists Newton Colmore, on 0121 268 2240 or make an application and one of our team at Newton Colmore will contact you. Please note we will not be able to discuss the role specifics until we have a copy of your CV.....Read more...
£27,800 starting, permanent role, travel benefits, wellness programmes, ongoing training and development, enhanced company pension plan, Mon-Fri no weekend work, sick pay scheme, free onsite parking This Breakdown Coordinator role plays a key role in coordinating maintenance, repair, and breakdown activities to ensure efficient service delivery and high levels of customer satisfaction. The company is a nationwide, well respected and known business. Acting as a central point of contact out of our Elland site, the breakdown coordinator role involves managing incoming service requests, allocating Field Service Engineers, and maintaining accurate records across internal systems. Responsibilities of our Breakdown Coordinator
To take customer calls and log repair notifications.
To allocate appropriate Field Service Engineer response to meet customer requirements.
Liaise with UK service supervisor and Service Manager regarding any issues that may arise.
Keep customers updated on the reported job progress.
Ensure all jobs are entered onto the appropriate in-house computer system.
To reschedule jobs and resources according to emerging customer needs and resource availability.
Undertake any other duties consistent with the purpose of this job or to support the needs of the business
What were looking for in our Breakdown Coordinator
Great time management and ability to prioritise workload
Great communication skills
Ability to communicate with internal and external stakeholders
Attention to detail
Ideally service or breakdown coordinator experience
Benefits of our Breakdown Coordinator role
Secure, permanent role
Employee health and wellness programmes
Mon – Fri only
Enhanced pension plan
Sick pay scheme
Clear progression routes and support from management
If you are interested in this breakdown coordinator role, please apply now or contact Grace at E3 Recruitment
....Read more...
The successful applicant will spend their days supporting and learning from technicians and engineers alike in the build and design of Chelton Products
This will involve the physical build and test of our product as well as the design processes, which will include design meetings and reviews, CAD work and remedial investigation
Training:Qualifications included:
Engineering Manufacturing Technician Apprenticeship Standard Company Training Plan & Assessment
BTEC Level 4 Higher National Certificate in Engineering (1 day per week for 2 years at college)
Level 4 Diploma in Engineering and Advanced Manufacturing (Development Competence)
Level 2 Functional Skills - maths (If required)
Level 2 Functional Skills - English (If required)
End Point Assessment at the end of the apprenticeship (Months 36 to 39)
College will be in Bicester, Oxfordshire
Training Outcome:
Upon completion of the apprenticeship by the successful applicant, there will be the opportunity to join the engineering team in one of our business units where the former apprentice can begin their progression through each engineering level
There are also opportunities to move into management roles if desired
One of our previous apprentices is now a Head of Engineering in Chelton and previous to that held one of our Business Unit Manager roles
Employer Description:At Chelton we engineer advanced, robust land-based and airborne products and solutions designed to empower critical civil and military operations in dynamic environments. Working closely with global defence agencies and aviation leaders, we've developed a broad range of solutions to meet the diverse requirements of our customers. Our technology enhances operational capabilities, enables seamless communication, protects aircraft, pilots and passengers and supports navigation worldwide.Working Hours :Monday - Friday, 9.00am - 5:00pmSkills: Communication skills,IT skills,Attention to detail,Organisation skills,Problem solving skills,Number skills,Analytical skills,Logical,Team working,Creative,Initiative,Patience,Time Management,Willingness to learn....Read more...
Multi-disciplined engineer for production of medium to high volume complex components for (predominantly) the Aerospace industry
Set & Operate bar fed CNC Sliding Head twin spindle machine tools
Program & Set multi-sensor CNC inspection equipment
CNC program development using CAD/CAM systems
In process inspections
Offset adjustment
Tip changing
Tool setting
Machine set-up
CNC program editing for cutting and inspection equipment
Inspection equipment programming
CNC programming (basic)
CAD/CAM programming
Training:
Level 3 Machining Technician Apprenticeship Standard:
This programme is delivered via a day release delivery model which means that one day per week, your attendance is required at our Engineering campus, NG17
This attendance is required during term time only
You will work with expert assessors to develop new knowledge, skills and behaviours within the profession
You will experience a blended learning model
You will gather learning evidence, journals and off-the-job records using your e-portfolio
At the end of the planned learning period, it will be agreed that you are ready to enter 'Gateway' and for your End Point Assessment to be arranged
Training Outcome:
Potential full time employment upon completion of apprenticeship
Employer Description:Trust Precision Engineering is an AS9100 for Aerospace accredited machined parts sub contract service provider specialising exclusively in sliding head machining. The proven cost savings of 1 hit machining for both simple and complex components is fundamental to our philosophy. Trust Precision will provide the highest quality and service for your machined component requirements. With our uncompromising approach to the business you will get the quality and value you deserve.Working Hours :Monday - Friday, 08.00 - 16.00.Skills: Attention to detail,Interpersonal skills....Read more...
Working on a variety of incredible projects around the world, you will have a varied role which will include:
Undertaking detailed structural engineering design (using both software and knowledge to verify rigorous calculations
Preparing technical specifications and schedules, design stage reports, structural specifications and innovative design solutions.
Planning and undertaking Computer Aided Drawings for production of design work
Using Building Information Modelling (BIM) software to design engineering services on projects, learning from colleagues and in-house training
Ensuring service and project work are carried out to a high standard within agreed deadlines and within budget
Assist in the development of computational engineering to create innovative design solutions
Representing the company as part of a team, attending design team meetings or meetings with clients and architects
Training:
Advanced Civil Engineering Technician (Level 3) – Apprenticeship standard
1 Day College release
Regular assessor visits
Functional Skills, where required and where evidence of eligibility criteria has not been produced (C/4 Grades in maths and English)
Training Outcome:Upon completion of the apprenticeship, there will be an opportunity to progress to an engineering technician role with the company.
Future progression includes civil engineer status and further industry accreditation.Employer Description:You could help make a real difference on some of the most exciting and complex engineering challenges in the future. BuroHappold Engineering is best known for delivering some of the most iconic and inspiring projects worldwide. We are an international, integrated engineering consultancy operating in 21 locations worldwide. For over 40 years, we’ve built our reputation for delivering creative, value-led building and city solutions for an ever-changing world.Working Hours :37.5 hours per week.
Monday to Friday, 9.00am - 5.30pm.
1 hour unpaid lunch break.Skills: Communication skills,IT skills,Attention to detail,Organisation skills,Problem solving skills,Number skills,Analytical skills,Logical,Team working,Creative,Initiative....Read more...
The Engineering and Maintenance Apprentice supports the Engineering Team in all electrical and mechanical works within the field of Cast Nylon manufacturing.
The first year of the apprenticeship will allow the Apprentice to gain knowledge and experience across all areas of the business as they will participate in a rotation of various key departments within the organisation.
The second year of the apprenticeship will then focus solely on Engineering and Maintenance and the development of the duties as listed below:
Learning and understanding the importance of Health and Safety within the workplace
Observing, learning and understanding a wide range of engineering skills and processes while under the instruction of skilled technical staff
To be able to demonstrate these skills and processes as the training period progresses by working independently or with a team, to undertake tasks as instructed and increasing overall contribution to the department
To develop the skills to manage a project from concept/design through to build and implementation into the business
To develop an understanding of the functional principles of the equipment/machinery within the business
Training:
Maintenance and Operations Engineering Technician Level 3 Apprenticeship Standard
You will attend Leicester College, Abbey Park Campus, one day per week
Training Outcome:
Full time Maintenance Engineer
Employer Description:Nylacast is a leading manufacturer of low-weight, low-friction polymers components, using mechanical engineering principles, and offer award winning solutions for safety critical applicationsWorking Hours :Monday to Friday, 08:30- 16:30 with a daily 30-minute lunch break for the first year. Potentially moving to Alternating Double Day Shift in the second year (6am- 2pm, 2pm- 10pm)Skills: Communication skills,IT skills,Attention to detail,Problem solving skills,Number skills,Analytical skills,Logical,Team working,Initiative,Non judgemental....Read more...
Electrical Maintenance Engineers – FM Service Provider – Commercial Building – Basildon, Essex – Up to £40,000 per annum – No Call Out An exciting opportunity to join an established building services company based in Basildon, Essex. CBW Staffing Solutions is currently recruiting for both an Electrical Maintenance Engineer to be based at a commercial building, working as part of an on-site maintenance team. The successful candidates will be electrically qualified with a proven track record in commercial building maintenance. Working alongside a team of 5 engineers, you will be responsible for delivering both planned preventative and reactive maintenance across all building services systems. In return, the company is offering a competitive salary of up to £40,000, no call-out, 25 days holiday, and excellent opportunities for training and career progression. Hours of Work: - Monday to Friday- 08:00 am – 17:00 pm Key Duties & Responsibilities:Carry out planned preventative maintenance (PPM) and reactive maintenance across building servicesMaintain and service HVAC systemsPerform emergency lighting testing and fire alarm checksMonitor and maintain control panels and carry out ballast changesWater treatment tasks including temperature checksMonitor BMS systems (hot & cold checks)Maintain and update logbooks and compliance recordsCarry out basic plumbing works including unblocking toiletsMaintain pumps and motorsEnsure all work is completed in line with health & safety regulationsPackage:Salary: Up to £40,000 per annumNo call-out25 days holiday Company pension schemeTraining and development opportunitiesRequirements:Electrically qualified – City & Guilds Level 2 minimumMust be able to provide copies of trade certificatesProven track record in commercial building maintenanceMulti-skilled across building servicesStrong communication and client-facing skillsFor more information or to apply, please send your CV to Bailey White at CBW Staffing Solutions!....Read more...
About the Apprenticeship:
We are looking for an Apprentice Design Engineer to join our technical team and support the delivery of a range of construction and engineering projects.
This apprenticeship combines:
Academic study (college with the potential to progress to university)
Hands-on experience in the workplace
Training in industry software and digital design tools
You will develop an understanding of engineering principles, while learning how design concepts are developed and translated into detailed 3D models and technical information used in construction projects
Our engineering teams focus on developing engineering solutions, while technicians help transform these designs into coordinated digital models and drawings used during the construction process.
What You’ll Learn:
During your apprenticeship you will gain experience in:
Building Information Modelling (BIM)
3D design and modelling software such as Revit
Building performance and analysis tools such as IES Virtual Environment
Engineering design development and coordination
Working on real construction projects with experienced engineers and technicians
There will also be opportunities to explore different career paths within the business, including:
Building Information Modelling
Mechanical Engineering
Electrical Engineering
Sustainability
Building Performance Engineering
What You’ll Be Doing:
As part of the team, you will:
Assist with the development of engineering design models and drawings
Support engineers and technicians on live construction projects
Help coordinate design information between different disciplines
Learn how digital tools are used to support building design and construction
Contribute to improving digital engineering workflows and processes
You will also be encouraged to explore new technologies, including how AI and advanced digital tools can support the development of engineering design information
Training:Engineering and Manufacturing Support Technician Level 3.Training Outcome:Development and progression will initially follow the requirements of the apprenticeship but will then lead onto further opportunities depending upon the route selected, for example Building Information Modelling, Electrical Engineering, Mechanical Engineering or Sustainability and/or Building Performance Engineering.Employer Description:TGA Consulting Engineers LLP provides expert design and engineering advice in Building Engineering Services. We work across the construction industry on a wide range of projects including new buildings and refurbishments, supporting both traditional design teams and design-and-build contractors.
Our experience spans many sectors, including:
Healthcare
Education (schools, colleges and universities)Commercial offices
Historic buildings
Museums and galleries
Retail spaces
Laboratories
Industrial developments
TGA has offices in Newcastle, Stockton and Leeds. This role is expected to be based in the North East, but you will work with teams across the wider business.Working Hours :Monday - Friday 8.00am - 4.00pm. Lunch can be taken between 12:30pm and 1:15pm.Skills: Communication skills,IT skills,Attention to detail,Organisation skills,Problem solving skills,Administrative skills,Number skills,Analytical skills,Logical,Team working,Initiative....Read more...
