We are looking for an experienced Senior RF Electronics Engineer to join an innovative engineering team working on the development of advanced RF and electronic systems across a range of technically challenging applications.
This is an excellent opportunity for an engineer who enjoys working across different technologies and projects, taking new concepts from initial design through to prototyping, testing and successful verification.
You will work alongside experienced engineers and technical specialists, contributing to the design, development and testing of new RF-based systems and products. The role also offers the opportunity to engage directly with customers and communicate complex technical concepts clearly to non-technical stakeholders.
Applicants for this role must hold, or be eligible to hold, UK SC Clearance.
Key Responsibilities
- Design, develop and test RF and analogue electronic circuits and systems.
- Take RF products and modules from initial concept through prototyping, development and design verification.
- Perform RF, microwave and analogue circuit design and simulation.
- Contribute to the design of RF amplifiers, filters, frequency synthesisers and associated circuitry.
- Develop innovative technical solutions to complex engineering challenges.
- Work closely with multidisciplinary engineering teams throughout the development lifecycle.
- Support laboratory testing, debugging and performance optimisation using advanced RF test and measurement equipment.
- Contribute to technical reviews and communicate engineering decisions and results to both technical and non-technical stakeholders.
- Support the development and continuous improvement of engineering processes and technical approaches.
About You
You will ideally have:
- A degree or MEng in Electronic Engineering, RF Engineering or a related discipline.
- 6+ years of post-graduate experience designing RF-based circuits and systems.
- Proven experience developing RF products or modules from concept through to design verification.
- Strong microwave, RF and analogue design and simulation skills.
- Experience with RF amplifier, filter and frequency synthesiser design.
- Strong problem-solving and analytical skills.
- Excellent communication skills, with the ability to explain complex technical subjects clearly.
Desirable Experience
- Experience with radio and/or radar systems.
- Experience with open architecture standards such as OpenCPI, STICS or SOSA.
- Team leadership or line management experience.
- Digital circuit design experience.
- Experience working at mmWave frequencies.
Whats on Offer
- Competitive salary based on experience and technical expertise.
- Opportunity to work on varied and technically challenging engineering projects.
- Access to advanced electronics, RF test and measurement facilities.
- Supportive and collaborative engineering environment.
- Ongoing training and professional development.
- Opportunities for career progression across technical, commercial and leadership pathways.
- Permanent position with the opportunity to make a significant contribution to innovative RF technology development.
TT....Read more...
We are looking for an experienced Senior RF Electronics Engineer to join an innovative engineering team working on the development of advanced RF and electronic systems across a range of technically challenging applications.
This is an excellent opportunity for an engineer who enjoys working across different technologies and projects, taking new concepts from initial design through to prototyping, testing and successful verification.
You will work alongside experienced engineers and technical specialists, contributing to the design, development and testing of new RF-based systems and products. The role also offers the opportunity to engage directly with customers and communicate complex technical concepts clearly to non-technical stakeholders.
Applicants for this role must hold, or be eligible to hold, UK SC Clearance.
Key Responsibilities
- Design, develop and test RF and analogue electronic circuits and systems.
- Take RF products and modules from initial concept through prototyping, development and design verification.
- Perform RF, microwave and analogue circuit design and simulation.
- Contribute to the design of RF amplifiers, filters, frequency synthesisers and associated circuitry.
- Develop innovative technical solutions to complex engineering challenges.
- Work closely with multidisciplinary engineering teams throughout the development lifecycle.
- Support laboratory testing, debugging and performance optimisation using advanced RF test and measurement equipment.
- Contribute to technical reviews and communicate engineering decisions and results to both technical and non-technical stakeholders.
- Support the development and continuous improvement of engineering processes and technical approaches.
About You
You will ideally have:
- A degree or MEng in Electronic Engineering, RF Engineering or a related discipline.
- 6+ years of post-graduate experience designing RF-based circuits and systems.
- Proven experience developing RF products or modules from concept through to design verification.
- Strong microwave, RF and analogue design and simulation skills.
- Experience with RF amplifier, filter and frequency synthesiser design.
- Strong problem-solving and analytical skills.
- Excellent communication skills, with the ability to explain complex technical subjects clearly.
Desirable Experience
- Experience with radio and/or radar systems.
- Experience with open architecture standards such as OpenCPI, STICS or SOSA.
- Team leadership or line management experience.
- Digital circuit design experience.
- Experience working at mmWave frequencies.
Whats on Offer
- Competitive salary based on experience and technical expertise.
- Opportunity to work on varied and technically challenging engineering projects.
- Access to advanced electronics, RF test and measurement facilities.
- Supportive and collaborative engineering environment.
- Ongoing training and professional development.
- Opportunities for career progression across technical, commercial and leadership pathways.
- Permanent position with the opportunity to make a significant contribution to innovative RF technology development.
TT....Read more...
An established engineering organisation is looking for a Principal Embedded Engineer to provide technical leadership and help shape the development of its embedded software and firmware capability.
This is a senior technical leadership position combining hands-on embedded engineering with strategic direction, giving you the opportunity to establish engineering processes, develop technical capability, mentor engineers, and provide technical authority across a range of complex embedded systems.
You will lead the development and growth of an embedded engineering capability spanning microcontrollers, SoCs, FPGAs, embedded software and firmware.
Key responsibilities will include:
- Providing technical leadership, governance and oversight across embedded development activities
- Establishing and improving engineering processes, workflows and best practices
- Leading the development of reusable software modules and libraries
- Planning and delivering embedded software and firmware work packages
- Translating system and customer requirements into clear software and firmware specifications
- Developing system and software architectures and overseeing detailed design
- Defining verification strategies, validation plans and test procedures
- Ensuring traceability between requirements, design and verification
- Producing high-quality technical documentation and engineering reports
- Ensuring deliverables meet required quality, compliance and safety standards
- Supporting estimates, bids, proposals and engineering change activities
- Working closely with hardware, software and systems engineering teams
- Supporting the integration of embedded software and hardware platforms
- Mentoring and developing engineers across different levels of experience
- Supporting recruitment, onboarding and the management of internal engineers and specialist contractors
Required Experience & Skills
- HNC/HND or degree in Electrical/Electronic Engineering, Computer Engineering or a related discipline, or equivalent practical experience
- Extensive experience working with microcontrollers, SoCs, FPGA-based systems and embedded software
- Strong embedded C/C++ development experience
- Experience defining and implementing engineering processes
- Ability to develop specifications, architectures, verification strategies and test procedures
- Experience providing technical leadership and mentoring engineers
- Strong understanding of current embedded, microcontroller, SoC and FPGA technologies
- Ability to make appropriate technology selections based on requirements, risk, cost and timescales
Desirable Experience
- Hardware Description Languages, particularly VHDL
- FPGA simulation and verification tools
- Experience delivering safety-related systems or working to standards such as SIL or ASIL
- Experience working across both hardware and embedded software development
- Experience developing reusable engineering frameworks, libraries or platforms
This is an excellent opportunity for an experienced embedded engineer to take a significant technical leadership position, helping to shape embedded engineering capability, processes and technical direction while remaining closely involved in the development of complex embedded systems.
Due to the nature of the projects involved, the successful candidate must be eligible to obtain and maintain UK Security Clearance at SC level.
TT....Read more...
Electrical Engineer London £45,000 - £65,0000 The RoleAs an Electrical Engineer, you will support the delivery of innovative and sustainable building services solutions across sectors including commercial, residential, education, healthcare, and mixed-use developments, contributing to projects from concept design through to completion as part of a collaborative multidisciplinary team.What You'll Be DoingYou will design electrical building services systems including power, lighting, small power and emergency systems.You will prepare calculations, specifications, reports and technical design documentation.You will coordinate with other electrical engineers, mechanical engineers, architects and other project stakeholders.You will support projects through all RIBA stages, ensuring successful delivery.You will attend client and design team meetings, providing technical expertise when required.You will ensure designs comply with relevant regulations, standards and industry best practice.You will contribute to the delivery of sustainable and energy-efficient building solutions.What You'll NeedDegree qualified in Electrical Engineering or Building Services Engineering.Experience working within a building services consultancy environment.Strong understanding of electrical building services design principles.Experience using software Revit MEP, Dialux, Amtech or Lightening DesignProgress towards Chartership would be advantageous.What's In It For YouCompetitive salary and other benefitsYou will work on a varied and technically challenging project portfolio.You will benefit from clear progression opportunities and ongoing professional development.You will receive support towards professional accreditation and career advancement.Apply NowIf you are an Electrical Engineer looking for your next challenge within a leading consultancy, apply now for a confidential discussion.About Energi People Having spent 20 years earning trust across MEP building services, structural and mission-critical engineering with the very best construction engineering firms in the UK, UAE, USA and beyond, we know the disciplines, the best employers, and crucially, the roles that aren’t advertised. Find out more at https://energipeople.com/....Read more...
An exciting opportunity has arisen for a Lead Radar Systems Engineer to provide technical leadership across advanced radar and RF programmes within a growing, technology-led engineering organisation.
This is a hands-on technical leadership position for an experienced radar specialist who enjoys solving complex engineering challenges while helping shape the future direction of radar and RF capabilities.
You will lead the technical definition of advanced radar systems and RF architectures from concept through to demonstration and deployment, working closely with multidisciplinary teams across RF, electronics, signal processing, software and systems engineering.
The role also offers the opportunity to influence technical strategy, mentor engineers, support customer engagements and contribute to the development of new capabilities and programmes.
Key Responsibilities
- Lead the development of advanced radar and RF systems.
- Define and assess RF architectures against complex and evolving customer requirements.
- Make system-level trade-offs across performance, cost, risk and implementation complexity.
- Provide technical leadership to multidisciplinary engineering teams.
- Develop radar system requirements, architectures and performance models.
- Conduct system-level analysis and evaluate radar performance, including detection range, resolution, sensitivity and clutter.
- Act as a technical authority when engaging with customers and stakeholders.
- Support technical scoping, proposals, project planning and programme development.
- Identify opportunities arising from customer challenges and emerging technologies.
- Mentor and develop engineers across radar, RF and systems disciplines.
- Contribute to technology roadmaps, research and capability development.
Experience & Skills
We are looking for a highly capable engineer with 10+ years' industrial experience in customised radar systems development, with deep expertise across a substantial proportion of the following:
- Pulse and FMCW radar systems
- SAR and radar imaging systems
- Radar performance modelling, analysis and architecture development
- Antenna concepts and system integration
- Radio propagation and RF link/level planning
- RF transceiver architecture and synthesiser systems
- RF and microwave circuit design
- Distributed microwave and millimetre-wave techniques
- High-performance frequency synthesisers and analogue RF electronics
- Requirements capture, analysis and systems engineering
- Verification and validation planning
- Technical leadership of multidisciplinary engineering teams
- Project definition, technical scoping and capability development
Security Clearance
UK Security Check (UKSC) / UK Eyes Only (UKEO) eligibility is essential. Candidates must also be willing and eligible to obtain NATO Secret and UK Developed Vetting (DV) clearance. Existing NATO Secret and/or UK DV clearance would be highly desirable.
Whats on Offer
- A senior technical leadership position within an advanced engineering environment.
- The opportunity to influence the development of radar and RF capabilities.
- Exposure to technically challenging, multidisciplinary programmes.
- Significant autonomy and the opportunity to shape technical direction.
- Strong opportunities for technical and career development.
- A collaborative working environment with regular team and social activities.
- Convenient access to Cambridge by road and rail.
TT....Read more...
C Software Engineer – Defence Sector – Cambridge
A growing Defence and Security company, based in Cambridge, is currently seeking an experienced C Software Engineer to contribute to the development of breakthrough technologies that will enhance the UK’s security against external threats.
You will have the opportunity to work on cutting-edge systems architecture, ideally utilizing past firmware and embedded software tools. The projects you will be involved in will truly mind-blowing, challenging you on a daily basis.
It would also be ideally, though not essential, if you have previous knowledge and experience in Software-Defined Radio (SDR) and Real-Time Operating Systems (RTOS). There will also be a significant amount of algorithm development, so a strong mathematical background would be advantageous in this role.
The company has recently revamped cutting-edge labs, enabling development at the forefront of the sector. This means you will be working on brand-new developments using the latest technologies available.
Knowledge of other programming languages such as C++, MATLAB, or Python will also be required.
As this role involves working in the defence and security sectors, you will need to be able to obtain (or already hold) security clearance. If you have previous experience in the defence and security field and hold security clearance, this would be highly advantageous.
In addition to working within a growing company on some of the most fascinating projects, you will also be rewarded with an excellent starting salary (based on level of experience), bonuses, enhanced pensions, healthcare, gym membership, free lunches, and other excellent benefits you would expect from a larger organisation.
If you believe you are well-suited for this role, I suggest submitting an application now to avoid missing out on this career opportunity.
For more information, please feel free to call Andrew Welsh, Director of Medical Devices Recruitment and Scientific Recruitment Specialists Newton Colmore, on +44 121 268 2240, or submit an application, and one of our team members at Newton Colmore will contact you.
....Read more...
Mechanical Engineer – Cancer Instrumentation – Cambridge
A growing division within an established Medical Devices organisation in South Cambridge is currently seeking an experienced Medical Devices Mechanical Engineer to contribute to their ongoing development of cutting-edge cancer instrumentation, aimed at improving patient recovery rates.
This company is expanding its team dedicated to Medical Devices Instrumentation, primarily focusing on Cancer Instrumentation. Ideally, they are looking for candidates with prior experience in Medical Devices Instrumentation. However, they are open to considering candidates who have worked on other types of Medical Devices, provided they were developed to ISO 13485 standards.
The company offers state-of-the-art labs and workshops to facilitate your success in developing these life-saving technologies. You will also receive ongoing training and development to ensure you stay at the forefront of technological advancements.
In addition to relevant experience, it is expected that you hold a relevant degree in mechanical engineering or a related field that has prepared you for a career within the Medical Devices sector.
As mentioned, you will be working on life-saving technologies, benefiting from continued career and skills development, and rewarded with an excellent starting salary, pension, life assurance, bonuses, healthcare, dental coverage, and other benefits typically associated with large multinational organisations.
Due to the anticipated high level of interest in this role, we recommend that if you are interested, you submit your application promptly and specify the types of Medical Devices you have experience working on.
For further information, please do not hesitate to call Andrew Welsh, Director of Medical Devices Recruitment and Scientific Recruitment Specialist at Newton Colmore, on +44 121 268 2240, or submit an application, and a member of our Newton Colmore team will contact you.
Newton Colmore Consulting is a specialist recruitment company within the Medical Devices, Scientific Engineering, Scientific Software, Robotics, Science, Electronics Design, New Product Design, Human Factors, Regulatory Affairs, Quality Assurance, and Field Service Engineering sectors.....Read more...
Optical Systems Engineer – Medical Devices - Cambridge
We are working with a leading Medical Devices company in Cambridge to recruit an Optical Systems Engineer who will play a key role in the development of industry disrupting and lifesaving/improving Medical Technologies.
This is a hands-on engineering role where you’ll be designing and integrating optical systems into complex medical technologies. From early feasibility through to product launch, you’ll be involved in every stage of development, helping to shape devices that improve diagnostics, treatment, and patient outcomes across a range of clinical applications.
You’ll be joining a multidisciplinary team of engineers and scientists, collaborating on projects that demand precision, creativity, and a deep understanding of how optics interact with mechanical, electronic, and biological systems. Your work will span simulation, prototyping, testing, and refinement, with a strong emphasis on regulatory compliance and real-world usability.
We’re looking for someone with a solid academic foundation in physics, engineering, or a related discipline, and hands-on experience in optical design and analysis. You should be confident using industry-standard tools and have a track record of delivering robust solutions in regulated environments. Experience in medical devices is highly desirable, but not essential if you bring strong transferable skills and a passion for healthcare innovation.
This role is ideal for someone who enjoys solving technical challenges, mentoring junior colleagues, and working closely with clients to bring ideas to life. You’ll be encouraged to explore new approaches, contribute to system-level thinking, and help shape the future of medical technology.
In return, you’ll receive a competitive salary, annual bonus, private healthcare, generous pension contributions, and access to a wide range of lifestyle and professional development benefits.
For more information, please contact Andrew Welsh, Director of Medical Devices, Biotech and Drug Discovery Recruitment at Newton Colmore, on +44 121 268 2240. Alternatively, submit your application and a member of our team will be in touch. Please note that without a CV, we can only provide limited information.....Read more...
Senior Mobile Air Conditioning Maintenance Engineer – FM Service Provider – M25 – Up to £55,000 + Van & Fuel Card CBW Staffing Solutions are currently recruiting for a Senior Mobile Air Conditioning Maintenance Engineer to join a leading FM service provider, covering a portfolio of commercial sites across the M25. ARE YOU AN EXPERIENCED AC ENGINEER LOOKING FOR THE NEXT STEP IN YOUR CAREER? This is an excellent opportunity for an experienced Senior AC Engineer looking to take that next step and play a key technical role within a large FM contract. Alongside carrying out planned and reactive maintenance, you will act as a senior technical point of contact, supporting the wider engineering team and helping to upskill and develop AC engineers across the whole contract. The successful candidate will have a minimum of 10 years' experience within the Air Conditioning industry, with strong technical knowledge and the ability to mentor and develop less experienced engineers. You will be expected to share your technical knowledge, assist with complex faults and help drive consistent engineering standards across the contract. The company offers a competitive salary of up to £55,000, a company van and fuel card, regular overtime opportunities, ongoing technical training and genuine long-term career progression. Key Duties & ResponsibilitiesCarry out planned preventative maintenance (PPM) and reactive maintenance on a wide range of air conditioning systems, including VRV/VRF, split systems, AHUs and FCUs.Diagnose complex faults and carry out repairs to ensure systems operate efficiently and reliably.Act as a senior technical point of contact for AC engineering across the contract.Support, mentor and upskill AC engineers across the wider contract, sharing technical knowledge and best working practices.Assist engineers with complex fault finding and technical issues where required.Help maintain consistent engineering standards across multiple sites within the M25.Identify training and development requirements within the AC engineering team.Perform routine inspections, filter changes, coil cleaning and system testing.Ensure all work is completed in line with F-Gas regulations and industry standards.Respond promptly to reactive maintenance calls across the contract.Complete maintenance reports and job sheets accurately using the company's systems.Liaise with clients, management and engineering teams to ensure high service levels are maintained.Identify plant improvements and provide recommendations where appropriate.Take ownership of your workload while supporting the wider engineering operation.PackageSalary: Up to £55,000 per annumMonday to Friday, 8:00am – 5:00pmCompany van & fuel card provided25 days annual leave plus bank holidaysOvertime availableOngoing training and developmentGenuine career progressionUniform, tools and PPE providedM25-wide commercial contractRequirements10 years' experience within the Air Conditioning industryValid F-Gas CertificationRelevant NVQ / City & Guilds qualification in Air Conditioning or RefrigerationStrong experience within the HVAC / Building Services / Facilities Management sectorExtensive working knowledge of VRV/VRF systems, split systems, AHUs, FCUs and associated plantProven ability to mentor, coach and upskill other AC engineersStrong technical fault-finding and problem-solving abilityFull UK Driving LicenceExcellent communication and client-facing skillsAbility to work independently while managing your own workload effectivelyWillingness to travel across commercial sites within the M25THIS IS A GENUINE STEP-UP OPPORTUNITY FOR AN EXPERIENCED AC ENGINEER LOOKING TO TAKE ON A MORE SENIOR TECHNICAL AND MENTORING ROLE.....Read more...
An exciting opportunity has arisen for an Operations Engineer to join a growing satellite communications organisation, supporting the deployment, operation and ongoing development of next-generation satellite connectivity solutions.
Working closely with Operations, Development and Systems Engineering teams, you will provide advanced technical support for user terminals, troubleshoot complex issues, support software and firmware releases, and help improve system performance across a range of applications.
This is an excellent opportunity for an engineer with a background in communications, RF technologies and IP networking to work on technically challenging projects within a rapidly evolving industry.
Key Responsibilities
- Provide Tier 3 operational support for user terminal services, including troubleshooting, debugging and resolving complex technical issues.
- Plan and test new firmware and software releases across a range of user terminal technologies.
- Deliver hands-on training on new features and terminal equipment to Operations teams and distribution partners.
- Collaborate with Development and Systems Engineering teams to identify issues and improve user terminal performance.
- Investigate and reproduce reported technical issues in collaboration with equipment vendors.
- Create and maintain technical documentation covering operational standards, procedures and processes.
- Support the installation, configuration and deployment of user terminals.
- Work directly with distribution partners to provide on-site technical support when required.
Requirements
- At least 3 years' experience working with satellite communications and RF technologies.
- Experience with IP networks, including routing and switching.
- Good working knowledge of Linux operating systems and experience programming in Python.
- A systematic and methodical approach to troubleshooting, debugging and problem-solving.
- Experience using AI tools to support technical work.
- Excellent written and verbal communication skills, with the ability to explain technical issues and solutions to both technical and non-technical audiences.
- An understanding of regulatory requirements and testing standards relevant to land, maritime and aviation applications.
- Experience using RF testing and measurement equipment.
- A degree in a relevant engineering or technical discipline, such as Information Systems, Computer Science, Electrical Engineering or Computer Engineering.
Desirable Experience
- A working understanding of cellular communications technologies, such as 3GPP and 4G.
- Electrical and mechanical skills relevant to satellite communications equipment.
You will play an important role in supporting the successful deployment and operation of satellite user terminals, working across technical support, testing, system performance and product development.
If you have a strong technical background in Satellite Communications and RF, enjoy investigating complex engineering challenges and thrive in a collaborative environment, we'd be keen to hear from you.
TT....Read more...
Hot Fire Test Engineer required with experience of COMAH controlled testing of Firing engines using propellants.
You will work within a Test department of a space thruster test facility on Hot Fire Testing programmes including: site preparation and maintenance, fuel and oxidiser handling, pressure systems, instrumentation, control systems, space thruster theory, steam boiler operation, data analysis, site and system safety, etc.
This is a fantastic opportunity to join an exciting and rapidly growing organisation at the cutting edge of Aerospace and Space Research, Design and Development.....Read more...
Hot Fire Test Engineer required with experience of COMAH controlled testing of Firing engines using propellants.
You will work within a Test department of a space thruster test facility on Hot Fire Testing programmes including: site preparation and maintenance, fuel and oxidiser handling, pressure systems, instrumentation, control systems, space thruster theory, steam boiler operation, data analysis, site and system safety, etc.
This is a fantastic opportunity to join an exciting and rapidly growing organisation at the cutting edge of Aerospace and Space Research, Design and Development.....Read more...
An exciting opportunity has arisen for an experienced Senior Mission Operations Engineer to join a growing space operations team supporting complex satellite missions across their full lifecycle.
This is a broad and technically varied role, with responsibilities spanning mission development, operations preparation, launch and early operations, routine spacecraft operations, mission planning, spacecraft control, anomaly resolution and end-of-life activities.
Unlike more traditionally segmented operations positions, this role provides exposure across a wide range of mission operations disciplines. Youll have the opportunity to influence operational concepts, develop new tools and processes, and help shape how a growing fleet of spacecraft is operated.
The Role
- Act as an Operations Technical Lead across missions and projects.
- Perform routine and critical real-time spacecraft operations.
- Take on a range of operational responsibilities including Mission Manager, Spacecraft Operations Engineer, Mission Planning and Spacecraft Controller.
- Develop and maintain mission operations procedures, tools, scripts and documentation.
- Support mission planning, scheduling, on-call operations and coordination with spacecraft, ground systems and flight dynamics teams.
- Contribute to mission operations concepts and requirements across space and ground segments.
- Support operations preparation, including operability requirements, FDIR and flight software analysis.
- Prepare and deliver mission operations training and simulation/rehearsal campaigns.
- Participate in major mission reviews and identify operational risks during mission development.
- Monitor spacecraft health and performance and investigate anomalies.
- Develop innovative operational solutions to enable a small team to efficiently control multiple spacecraft.
- Provide technical guidance and mentoring to less experienced team members.
The role is predominantly 9-to-5 with hybrid office/home working, although longer days and periods of consecutive onsite working will be required during critical mission phases.
About You
Were looking for an experienced spacecraft operations professional who can operate confidently across multiple disciplines and remain calm and methodical during high-pressure mission activities.
Essential experience includes:
- Degree in a relevant engineering or scientific discipline.
- 5+ years' experience within the satellite/space industry, ideally including real-time spacecraft operations.
- Experience operating LEO spacecraft across multiple mission phases.
- Strong knowledge of satellite subsystems, particularly AOCS/GNC and/or On-Board Data Handling.
- Experience with mission control systems, including procedure development, monitoring and control, mission planning and configuration management.
- Experience with spacecraft performance monitoring and anomaly investigation/resolution.
- Strong problem-solving and root-cause analysis capabilities.
- Excellent attention to detail and the ability to work independently.
- Ability to remain calm, disciplined and accurate during critical mission operations.
- Ability to develop and implement innovative spacecraft operations concepts.
- Eligible to obtain, or currently holding, SC security clearance or higher.
Desirable Experience
Experience with the following would be advantageous:
- SCOS-2000 or similar mission control systems.
- Formation flying, rendezvous or close-proximity satellite operations.
- Spacecraft systems engineering.
- Flight dynamics and orbital mechanics.
- Operations preparation and mission planning tools.
- ECSS standards relating to ground systems and operations.
- Developing operational concepts for small, highly capable mission control teams.
Whats on Offer?
- Hybrid working in Oxfordshire.
- Optional 9-day fortnight working pattern.
- 25 days' holiday, increasing with service, plus bank holidays.
- Private healthcare, life insurance and long-term sick pay.
- Relocation support may be available.
- Modern engineering and mission operations facilities.
- Collaborative and internationally diverse working environment.
This is a particularly strong opportunity for a Senior Mission Operations Engineer looking to broaden their responsibilities beyond traditional spacecraft control, with genuine influence over mission operations strategy, processes and execution.
TT....Read more...
Industrial Electrical & Controls Engineer
Location: UK – Site-Based / Field-BasedSalary: Competitive, dependent on experienceJob Type: Permanent, Full-Time
Industrial Electrical Engineering | PLCs | Automation | Heavy Industry
Are you an experienced Industrial Electrical Engineer, Controls Engineer or EC&I Engineer who enjoys solving complex electrical and automation problems?
We're recruiting for an established engineering business supporting industrial plants, manufacturing facilities and heavy process environments across the UK.
This opportunity would suit a hands-on engineer with strong industrial electrical experience who is comfortable working with PLC-controlled machinery, motor control systems, variable speed drives and industrial automation equipment.
Whether your background is in electrical maintenance, industrial installations, commissioning or controls engineering, we're interested in engineers who can diagnose faults, understand how machinery operates and deliver practical solutions.
The Role
As an Industrial Electrical & Controls Engineer, you'll work across a variety of industrial sites, supporting electrical installations, fault diagnosis, control-system improvements and commissioning activities.
Your responsibilities may include:
Diagnose and resolve electrical and control-system faults across industrial machinery and production equipment.
Work with PLC-controlled systems, identifying faults within automated processes and associated electrical equipment.
Support the installation, modification and commissioning of industrial electrical and control systems.
Fault-find on motor control centres, electrical panels, three-phase motors and variable speed drives.
Investigate issues involving sensors, instrumentation, safety circuits and control equipment.
Assist with PLC, HMI and SCADA troubleshooting, configuration and system improvements.
Support machinery upgrades, automation improvements and the replacement of obsolete equipment.
Work alongside engineers, contractors and site teams to minimise downtime and improve plant reliability.
Read and interpret electrical drawings, wiring diagrams and control-system documentation.
What We're Looking For
We're particularly interested in candidates with:
Experience working with three-phase motors, VSDs, control panels, MCCs and industrial electrical systems.
Practical experience fault-finding on PLC-controlled machinery.
An understanding of industrial automation, control circuits, sensors and instrumentation.
The ability to diagnose electrical faults systematically and work independently on industrial sites.
A full UK driving licence and willingness to travel to customer sites.
Controls & Automation Experience
Experience in any of the following would be particularly valuable:
Siemens, Allen-Bradley/Rockwell, Schneider or Mitsubishi PLC systems.
PLC fault-finding, software modifications or programming.
HMI and SCADA systems.
Industrial instrumentation and process control.
Variable speed drives, motor control and automated machinery.
Control panel design, wiring or modifications.
You don't need to be an expert PLC programmer to be considered. Engineers with strong industrial electrical experience and practical PLC fault-finding capability are encouraged to apply.
Equally, experienced Controls or Automation Engineers looking for a varied, hands-on industrial engineering role would be very well suited.
Relevant Industry Backgrounds
We would welcome applications from engineers working within:
Aggregates, quarrying and mineral processing | Asphalt, concrete, cement and building materials | Heavy manufacturing and industrial production Steel, metals and fabrication | Water treatment and utilities | Food and beverage manufacturing | Recycling and waste processing | Automated production and materials handling
Experience within heavy industrial or continuous-process environments would be particularly advantageous.
Qualifications
Relevant qualifications could include:
NVQ Level 3 in Electrical Installation or Electrical Engineering
Electrical or Electronic Engineering HNC/HND
Recognised electrical apprenticeship
18th Edition Wiring Regulations
Additional industrial safety training, such as IPAF, PASMA or site safety passports, would be advantageous.
What's on Offer?
Competitive salary dependent on experience
Opportunities to develop further technical and controls expertise
Long-term career development within an established engineering business
Interested?
If you're an Industrial Electrician, Electrical Engineer, Controls Engineer, Automation Engineer or EC&I Engineer with experience working on industrial machinery, we'd be keen to hear from you.
Apply today for a confidential discussion.
....Read more...
Integrated Logistic Support or ILS Engineer with Defence Logistic Framework experience required to help develop and deliver ILS capabilities for equipment during the Project development, In Service Support phases and bid process for Naval equipment in Surveillance and Government sectors.
Requirements
Defence Logistic Framework capability development experience of Def-Stan 00-60, Def-Stan 00-600 application to defence programmes.
Integrated Logistic Support or ILS subject matter expert.
Electronic Engineering HNC level or higher qualification.
ASD S3000L application knowledge to supportability analysis programmes
Responsibilities
Help develop the ILS capability of the business line offering clients a full range of ILS activities.
Supportability Analysis
Level of Repair Analysis
Spares Ranging and Scaling
Whole Life Cost Analysis
Logistic Information Repository management and update
Obsolescence analysis
Any other task associated with this role.....Read more...
Integrated Logistic Support or ILS Engineer with Defence Logistic Framework experience required to help develop and deliver ILS capabilities for equipment during the Project development, In Service Support phases and bid process for Naval equipment in Surveillance and Government sectors.
Requirements
Defence Logistic Framework capability development experience of Def-Stan 00-60, Def-Stan 00-600 application to defence programmes.
Integrated Logistic Support or ILS subject matter expert.
Electronic Engineering HNC level or higher qualification.
ASD S3000L application knowledge to supportability analysis programmes
Responsibilities
Help develop the ILS capability of the business line offering clients a full range of ILS activities.
Supportability Analysis
Level of Repair Analysis
Spares Ranging and Scaling
Whole Life Cost Analysis
Logistic Information Repository management and update
Obsolescence analysis
Any other task associated with this role.....Read more...
Mechanical Maintenance Engineer
Location: Desford Shift Pattern: 4 on 4 off (Days & Nights) Salary: £55,000 + Up to £3,000 Annual Bonus Pension: 15% Total (10% Employer / 5% Employee)
Overview
We are recruiting for a Mechanical Maintenance Engineer to join a large, well‑established engineering team at a brand‑new, highly automated manufacturing site in Desford. This is an exciting opportunity to join one of the fastest‑producing facilities in Europe, operating within a dusty but cutting‑edge environment filled with modern automated machinery.
The Role
As a Mechanical Maintenance Engineer, you will be responsible for maintaining and improving a wide range of production equipment. Your key responsibilities include:
Key Duties
Mechanical fault finding and repair across fast‑paced production machinery
Conducting planned preventative maintenance (PPM)
Responding to breakdowns and reducing engineering downtime
Working on conveyors, mixers, ovens, and kilns
Supporting the wider engineering team within a highly automated environment
Ensuring all engineering activities are carried out safely and efficiently
Working Hours / Overtime Structure
4 on 4 off, rotating days and nights
296 banked hours annually, reducing to 206 hours after daily handover (5:30–6:00)
206 hours is equivalent to 18 days of overtime per year
Overtime during holiday cover on weekends is paid at time and a half
Any other overtime is also paid at time and a half
About You – Essential Criteria
Must be mechanically qualified (NVQ Level 3 or above)
Experience within FMCG or heavy industrial environments
Strong mechanical fault-finding skills
Ability to work effectively in a dusty, high-output manufacturing site
Industries Considered
FMCG
Heavy Industrial / Process
Automated manufacturing environments
Environment & Machinery
Dusty environment with state‑of‑the‑art automation
Working on equipment such as:
Conveyors
Mixers
Ovens
Kilns
Team Structure
You will join a large engineering team of around 20 engineers, offering strong peer support, cross‑training and excellent knowledge sharing.
Benefits
£55,000 salary + up to £3,000 bonus
15% pension (10% employer contribution)
Overtime paid at time and a half
Opportunity to work at one of the fastest‑producing manufacturing sites in Europe
Career development and progression opportunities
Why Is This Role Available?
Position has become available due to an engineer leaving the business.
Interview Process
Stage 1: Informal technical conversation with Carl, focused on experience and CV details.
Stage 2: On‑site interview with an engineer. Candidates must bring overalls and safety shoes and may complete a basic practical assessment, including panel work and a site walk around.
....Read more...
Electrical Maintenance Engineer
Location: Desford Shift Pattern: 4 on 4 off (Days & Nights) Salary: £57,000 + up to £3,000 annual bonus Pension: Up to 15% total (10% employer, 5% employee)
Overview
We are seeking a highly skilled Electrical Maintenance Engineer to join a large engineering team at a state‑of‑the‑art, highly automated manufacturing facility. This is a brand‑new, high‑volume production site—set to become one of the fastest in Europe—offering excellent training, modern equipment, and long-term progression.
This position has become available due to an engineer leaving, creating an excellent opportunity for a strong electrically‑biased engineer to join a well-supported and forward‑thinking team.
Key Responsibilities
Provide electrical maintenance, fault finding, and repair across a variety of automated manufacturing equipment.
Work on conveyors, mixers, ovens, kilns and other large-scale industrial machinery.
Support continuous improvement, reliability, and efficiency across the site.
Work within a large engineering team (approx. 20 engineers), ensuring safe and efficient operation of all equipment.
Complete handover processes daily (5:30–6:00).
Participate in holiday cover to reduce banked hours (296 hours reducing to 206 after handover deductions).
Undertake planned and reactive maintenance in a dusty, fast‑paced FMCG/industrial environment.
Overtime & Hours Structure
You will have 206 banked hours annually (equivalent to 18 days of overtime per year).
These hours can only be reduced through holiday cover.
Weekend holiday cover = time and a half deduction.
Any overtime not related to holiday cover = paid at time and a half.
Essential Requirements
Electrically qualified (City & Guilds / NVQ / HNC or equivalent).
Strong electrical bias with excellent fault‑finding skills.
Experience in FMCG or heavy industrial environments.
Experience with industrial electrical panels.
Exposure to automation, complex machinery, and fast‑paced engineering settings.
Desired Skills
Siemens experience (including Siemens S7)—desirable but not essential.
Ability to work within highly automated environments.
Experience in large production or manufacturing facilities.
Benefits
Up to 15% total pension (company contributes 10% when you contribute 5%).
Strong training and development opportunities.
Chance to work at a brand‑new, cutting-edge automated site with major production output.
Progression opportunities within a large engineering function.
Working Environment
Dusty industrial environment.
Highly automated systems and robotics.
Fastest producing site in Europe (target).
Large, supportive engineering team (approx. 20 engineers).
Interview Process
Stage 1: Informal technical discussion with Carl, reviewing your CV and experience.
Stage 2: On‑site technical assessment with an engineer.
Bring overalls & safety shoes.
Walk‑through of site.
Basic practical test (panel work, fault finding).
....Read more...
Electronics Engineer Consultant – Security Clearance – Cambridge
A new design consultancy, based in Cambridge, are currently looking for a Electronics Engineer Consultant to add to the team of experienced experts, specifically with a focus on security cleared projects.
Although this is a new design consultancy, they have the backing of larger companies meaning you still have the job security of working for a large company. You will also have benefits including pension, share purchase schemes, healthcare, life assurance and other excellent benefits not normally available to smaller organisations.
We are looking for an Electronics Engineer who has ideally worked on MOD, Security Clearance or other sensitive technologies. Due to the nature of consultancy services, your electronics experience could be across a number of fields such as RF Engineering, Microwave Electronics, Analogue Electronics, Sensors Technologies, PCB Electronics or other complex electronics design.
It will also be ideal if you have specific Firmware, Embedded or other software experience.
Due to the nature of work, you must already hold or be able to obtain security clearance.
Apart from the benefits, you will be rewarded with an excellent salary, career opportunities and a continued skills training to keep you at the forefront of technologies.
This is a rare opportunity to be involved with a design consultancy at the ground level, meaning future career development will be more likely than with other consultancies or companies. Due to this, I’m expecting a lot of interest in this role. If you are interested in the role, apply now or risk missing out.
For more information, please feel free to call Andrew Welsh, Director of Medical Devices recruitment and Scientific recruitment specialists Newton Colmore Consulting, on +44 121 268 2240 or make an application and one of our team at Newton Colmore Consulting will contact you.
Newton Colmore Consulting is a specialist recruitment company within the Medical Devices, Scientific Engineering, Scientific Software, Robotics, Data Science, Healthcare Communications. Science, Electronics Design, New Product Design, Human Factors, Regulatory Affairs, Quality Assurance and Field Service Engineering sectors.
....Read more...
Electronics Engineer – Cancer Instrumentation – Cambridge
A growing Medical Devices Division is currently seeking an Electronics Engineer to contribute to the development of new Cancer Instrumentation devices, based in South Cambridge.
You will work on a wide range of electronics design tasks, including, but not limited to, power electronics, digital/analogue electronics, RF, and other complex fields such as thermal, motion control, and electro-mechanical or electro-medical devices. While it is not expected that you have experience in all these areas, having expertise in as many as possible would be advantageous.
Specifically, you will need experience working within the Medical Devices sector adhering to ISO 13485 or EN 60601 standards. You will focus on Cancer Instrumentation devices designed to improve the survival rates of cancer patients. However, experience in other Medical Devices or Scientific Instrumentation will also be considered.
The company boasts state-of-the-art labs and workshops specially designed to support your success. They also provide on-site gym facilities, nearby running and cycling tracks for your fitness needs, and wellness programs to assist you as needed.
It is expected that you hold a degree in electronics or a related field that has prepared you for an electronics engineer role within the Medical Devices sector.
In addition to the challenging work and exceptional facilities, you will receive a competitive starting salary, bonuses, pension benefits, healthcare coverage, dental benefits, and other perks typically associated with blue-chip companies.
If you are interested in working on life-saving technologies, we recommend applying now to avoid missing out on this excellent opportunity.
For further information, please do not hesitate to call Andrew Welsh, Director of Medical Devices Recruitment and Scientific Recruitment Specialist at Newton Colmore, on +44 121 268 2240, or submit an application, and a member of our Newton Colmore team will contact you.
Newton Colmore Consulting is a specialist recruitment company within the Medical Devices, Scientific Engineering, Scientific Software, Robotics, Science, Electronics Design, New Product Design, Human Factors, Regulatory Affairs, Quality Assurance, and Field Service Engineering sectors.....Read more...
Mechanical Maintenance Engineer – FM Service Provider | Commercial Building | Croydon | £45,000 + Package CBW Staffing Solutions is currently recruiting an experienced Mechanical Maintenance Engineer to be based at a prestigious commercial building in Croydon, Surrey. Working as part of a close-knit on-site team of three engineers, the successful candidate will be responsible for carrying out planned preventative maintenance (PPM) and reactive maintenance tasks across the building. The ideal candidate will bring a strong background in Facilities Management and a proven track record in mechanical building maintenance. This is an excellent opportunity for a skilled engineer looking for stability, work-life balance, and genuine career development within a forward-thinking organisation. The PackageBasic salary of up to £45,000Plentiful overtime opportunitiesNo call-out requirement25 days annual leave plus bank holidaysCompany Pension SchemeExcellent career progression opportunitiesHours of Work: Monday to Friday | 08:00 – 17:00 Key Duties & ResponsibilitiesMonitor and maintain mechanical plant equipmentCarry out work on pumps, motors, seals, and bearingsService and maintain air conditioning systems, including Air Handling Units (AHUs) and Fan Coil Units (FCUs) — filter changes, cleaning, and general upkeepConduct water treatment checks, including temperature monitoring (non-dosing)Undertake plumbing tasks such as unblocking drains and toilets, replacing taps, washers, and general pipework repairsMonitor and respond to BMS (Building Management System) alarms and readingsCarry out basic electrical duties, including lamp replacementsMaintain general building fabric and carry out minor repairsEscort and supervise specialist subcontractors on siteRequirementsMechanical qualification — City & Guilds Level 2 or equivalent (Essential)Ability to provide copies of relevant trade certificatesProven track record in commercial building maintenanceMulti-skilled with a flexible, can-do approachStrong communication skills with the ability to liaise professionally with clients and colleaguesConfident working in a client-facing environmentTo be considered for this exciting opportunity, please send your CV to Charlie Long at CBW Staffing Solutions. Don't miss out — apply today!....Read more...
Mobile Commercial Gas Engineer - Manchester - National Facilities Management Organisation: HVAC contractor CBW Staffing Solutions have a fantastic opportunity for a Commercial Gas Engineer to join a leading facilities management organisation, on a permanent basis. You’ll carry out servicing, fault-finding, repairs and minor installations on a range of commercial heating systems across commercial sites. You will be working both independently and occasionally as part of a small team, covering Manchester, Liverpool & surrounding areas. Package:Competitive salary between £46,000 and £48,000 per annum (depending on experience)Van & fuel card suppliedBonus for achieved objectives based on achievable targetsCore hours are Monday - Friday (40 hours per week)Participation in an ‘out of hours’ on call rota (to be confirmed)25 days annual leave plus bank holidaysGenerous workplace pension schemeTraining, development & progression opportunitiesResponsibilities:Servicing and maintenance of a variety of commercial gas appliances and systems, including boilers, heaters, and pipeworkPerform routine inspections and safety checks to ensure gas systems are operating efficiently and in compliance with industry standardsDiagnose and repair mechanical and electrical faults in gas appliances, ensuring minimal downtime and maximum safetyConduct gas leak tests and carbon monoxide checks to identify and mitigate potential hazardsCollaborate with other maintenance personnel and contractors to coordinate complex repairs and system upgradesAdhere to safety protocols and regulatory requirements to promote a safe working environmentQualifications:Proven experience as a Commercial Gas Engineer or similar role within the facilities management industryGas Safe Register certification and relevant qualifications (e.g. ACS, COCN1, CODNCO1)Full UK driving licenceStrong knowledge of commercial gas appliances, systems, and regulationsProficiency in diagnosing and troubleshooting mechanical and electrical faultsExcellent problem-solving skills and attention to detailAbility to work independently and as part of a teamEffective communication and customer service skillsInterested? Apply with a full & up to date CV or call Amy O’Shea at CBW Staffing Solutions.....Read more...
An exciting opportunity has arisen for a technically strong GNC Algorithms Engineer to join a specialist space engineering team working on advanced spacecraft systems.
You will be involved across the full GNC development lifecycle, from early-stage algorithm design and modelling through simulation, verification, integration and operational support. The role offers the opportunity to work on complex spacecraft GNC challenges, including autonomous navigation, relative pose estimation, guidance, control and rendezvous and proximity operations.
Youll take ownership of challenging technical problems, develop innovative solutions and work closely with multidisciplinary engineering teams to turn advanced GNC concepts into robust, flight-ready systems.
Key Responsibilities
- Design, develop, implement and test GNC algorithms for spacecraft missions.
- Develop, validate and maintain high-fidelity GNC simulation environments for algorithm development and performance assessment.
- Model spacecraft hardware, orbital dynamics and attitude dynamics within simulation environments.
- Contribute to the design, development and testing of GNC flight software.
- Support hardware trade-off analysis, particularly relating to rendezvous and proximity operations and their impact on GNC performance.
- Support the integration of GNC software onto spacecraft platforms.
- Contribute to system-level engineering activities, including FMECA and FDIR definition and analysis.
- Support GNC verification and validation activities, including verification strategies, test plans, procedures and execution.
- Work collaboratively with Systems, Flight Dynamics, Computer Vision and other engineering disciplines to ensure software and hardware compatibility and performance.
Essential Experience & Skills
- Degree in Aerospace Engineering or another relevant engineering/science discipline.
- At least 2 years' industrial experience in GNC algorithm development and deployment.
- Professional experience within the space industry.
- Practical experience in several of the following areas:
- GNC algorithm design and development, including navigation filters, guidance strategies and spacecraft attitude/orbit control.
- High-fidelity simulation and modelling of spacecraft GNC systems.
- GNC sensor and actuator modelling.
- Orbital and attitude dynamics modelling.
- MATLAB/Simulink and Python.
- Git and collaborative software development.
- Development, testing and deployment of GNC algorithms into software or flight-software environments.
- Eligible to obtain, or currently holding, UK Security Clearance to SC level.
- Independent right to work in the UK without sponsorship.
Desirable Experience
- Strong understanding of spacecraft relative dynamics.
- Experience with GNC hardware testing.
- Experience with automatic code generation/autocoding for GNC algorithms or flight software.
- C/C++ software development experience.
- Automated testing, continuous integration and software quality assurance.
- Knowledge of robotics dynamics, kinematics and control.
Whats on Offer
- Hybrid and flexible working arrangements.
- Optional 9-day fortnight working pattern.
- 25 days' annual leave, increasing with service up to 28 days, plus bank holidays.
- Private healthcare.
- Life insurance and long-term sick pay.
- Relocation support may be available.
- Modern engineering, office and cleanroom facilities.
- Regular team and social events.
- The opportunity to work alongside highly skilled engineers on cutting-edge spacecraft technology.
- A collaborative, supportive and technically challenging working environment.
This is an excellent opportunity for a GNC engineer looking to develop their career within the space sector and contribute to the development of advanced spacecraft systems.
TT....Read more...
My client a well-established independent building services consultancy has an immediate requirement for an experienced senior level electrical design engineer to join them on a permanent basis.
They are looking for an ambitious engineer who can help the practice develop and grow so there would be a lot of client liaison and business development involved.
You know how to prepare conceptual schemes and develop these into detailed design packages.
Communication is key and you will be responsible for establishing / maintaining relationships with architects, contractors and clients to encourage repeat business. You will also carry out feasibility studies, condition surveys and site inspections.
You would Implement and manage QA systems and procedures on all projects and ensure all design respond to CDM regulations.
To be considered you should have at least 5-10 years' building services consultancy experience in the design of electrical services.
You should have a solid design/calculation background and be CAD literate with knowledge of Amtech/Dialux or Relux.
You should have excellent communications skills and be fully computer literate.
The projects are varied and they get involved in a mixture of high-end projects, including commercial, retail, leisure, educational and mixed-use projects. Previous experience in these fields would be an advantage
About Energi People
Having spent 20 years earning trust across MEP building services, structural and mission-critical engineering with the very best construction engineering firms in the UK, UAE, USA and beyond, we know the disciplines, the best employers, and crucially, the roles that arent advertised. Find out more at https://energipeople.com/....Read more...
An exciting opportunity has arisen for a Software Engineer to join a leading provider of flight simulation technology. You will develop real-time software used in state-of-the-art Full Flight Simulators and Fixed Training Devices that replicate the form, fit, and function of real aircraft flight decks.
This role sits at the heart of a major transformation programme and is ideal for someone who is hands-on, motivated, and eager to implement change in a fast-paced, customer-focused environment.
Key Responsibilities for the Software Engineer
- Develop real-time software for flight simulators, from control systems to graphical user interfaces.
- Support integration, testing, fault finding, and problem resolution on simulated systems.
- Contribute to the full product lifecycle, from requirements analysis through to customer acceptance and post-delivery support.
What Youll Bring
- Strong C programming skills.
- Practical understanding of the Systems Engineering V-model and/or Software Development Lifecycle.
- Ability to work collaboratively in a multi-disciplinary team, with minimal supervision.
- Strong communication and presentation skills.
- Degree in engineering, mathematics, science, or equivalent experience within aviation/aerospace engineering.
Desirable Skills
- Experience with safety-critical systems in aerospace, automotive, or related industries.
- Knowledge of C#, C++, web technologies (JavaScript, HTML), and Windows application development (Visual Studio).
- Familiarity with ARINC, AFDX, or CAN bus protocols.
- Experience using the Atlassian toolset (Jira, Confluence, Bitbucket, Bamboo).
Benefits
- 25 days holiday (plus bank holidays), increasing with service, with the option to buy/sell up to 5 days.
- Private medical insurance (with optional family cover).
- Pension scheme with up to 7% employer contribution.
- Life assurance (4x salary, flexible up to 10x).
- Group income protection.
- Flexible benefits including healthcare cash plan, dental cover, gym membership, critical illness cover, and cycle-to-work scheme.
- Employee assistance programme for mental health and wellbeing.
- Subsidised staff restaurant and on-site parking with electric vehicle charging.
Why Join
- Challenging Projects: Work on cutting-edge flight simulators used by global aerospace organisations.
- Collaborative Environment: Partner with experts across systems, hardware, and software engineering.
- Innovative Technology: Develop next-generation simulation solutions, including avionics hardware and advanced control systems.
- Career Growth: Opportunities for professional development and advancement within a forward-thinking, global industry.
Eligibility: Applicants must have the right to work in the UK.
This is a unique opportunity to contribute to next-generation flight simulation technology, working with cutting-edge systems that enhance pilot training and aviation safety worldwide.
TT....Read more...
