Corus Consultancy is hiring for Food Manufacturing - Cleaning Operative in Skelmersdale.
Responsibilities:
Deep Cleaning: Carrying out scheduled, daily, and deep cleaning tasks in both high-risk and low-risk production areas.
Equipment Sanitation: Cleaning, disinfecting, and sometimes dismantling/reassembling processing machinery to prevent contamination.
Documentation: Completing hygiene logs, records, and cleaning schedules to verify work has been completed to standard.
Chemical Handling: Safely using, diluting, and storing industrial cleaning chemicals (COSHH compliance).
Safety Compliance: Adhering to Health & Safety, PPE (Personal Protective Equipment) requirements, and food safety regulations.
"Clean as you go": Maintaining a high standard of cleanliness in the immediate work area throughout the shift.
Reporting: Promptly reporting any equipment faults, safety hazards, or hygiene non-conformances to management.
If interested contact – Madhu (07375920222)....Read more...
A skilled contract Pipefitter is required to join an established engineering consultancy working across the chemical, pharmaceutical, food, water, and wider process industries.
The role is based at a manufacturing plant in Dewsbury, West Yorkshire and is available on an initial 5-week contract, with the possibility of being kept on depending on performance.
What’s on Offer as the Pipefitter:
£30.00 per hour, paid for all hours worked
Consistent hours (approx. 60 per week)
Initial 5-week contract with potential to continue
Opportunity to work with a well-established engineering consultancy on process industry projects.
Key Details
Start Date: Monday 23rd February
Location: Dewsbury, West Yorkshire
Contract Length: 5 weeks initially (extension possible)
Pay Rate: £30.00 per hour (all hours paid at the same rate)
Hours: Approx. 60 hours per week
Working Hours
Monday – Thursday: 6:00am – 6:00pm
Friday: 6:00am – 1:00pm
Saturday mornings as required
The Role of the Pipefitter
The successful candidate will be responsible for pipe fabrication and installation work within an industrial manufacturing environment. Working from isometric drawings, the Pipefitter will fabricate and install pipework systems to a high standard while supporting site activities with MIG welding where required.
Key Responsibilities of the Pipefitter:
Fabricating and installing pipework systems
Working from isometric drawings
MIG welding of pipework and associated components
Ensuring work is completed to quality and safety standards
Working effectively with engineers, supervisors, and site teams
Maintaining a safe and organised working environment
Candidate Requirements
Proven experience as a Pipefitter in industrial or manufacturing settings
Strong pipe fabrication skills with the ability to work from isometric drawings
MIG welding experience
Background in process industry environments (chemical, pharmaceutical, food, water, etc.) preferred
Reliable, hardworking, and able to commit to long hours
Interested in the Pipefitter Role?
Candidates who meet the above requirements and are available to start on Monday 23rd February are encouraged to apply with an up-to-date CV. Alternatively reach out to Toni-Marie Monks at E3 Recruitment.
....Read more...
A skilled Contract Pipefitter is required to join an established engineering consultancy delivering projects across the chemical, pharmaceutical, food, water, and wider process industries.
The role is based at a manufacturing plant in Newark, Nottinghamshire and is offered on an 18-week contract, starting Monday 30th March. This is a stay-away role (Monday–Friday) with accommodation fully paid.
What’s on Offer for the Pipefitter:
£30.00 per hour, paid for all hours worked
Consistent 60-hour weeks
18-week contract with stable work
Accommodation fully paid for the duration of the project
Opportunity to work on a long-term manufacturing project with a respected engineering consultancy
Key Details of the Pipefitter:
Start Date: Monday 30th March
Location: Newark, Nottinghamshire
Contract Length: 18 weeks
Pay Rate: £30.00 per hour (all hours paid at the same rate)
Hours: 60 hours per week
Working Hours:
Monday – Friday: 6:00am – 6:00pm
The Role of the Pipefitter: The successful candidate will carry out pipe fabrication and installation work within an industrial manufacturing environment. Working from isometric drawings, the Pipefitter will fabricate pipework accurately and support installation activities, with MIG welding required as part of the role.
Key Responsibilities of the Pipefitter:
Fabrication and installation of pipework systems
Working from isometric drawings
MIG welding of pipework and associated components
Ensuring work is completed to quality and safety standards
Working effectively with engineers, supervisors, and other trades on site
Maintaining a clean, safe, and organised working environment
Candidate Requirements
Proven experience as a Pipefitter in industrial or manufacturing environments
Strong pipe fabrication skills with the ability to work from isometric drawings
MIG welding experience
Background in process industry environments (chemical, pharmaceutical, food, water, etc.) preferred
Reliable, flexible, and able to commit to long working hours
Happy to work away from home Monday–Friday
Interested? Candidates who meet the above requirements and are available to start on Monday 30th March are encouraged to apply with an up-to-date CV. Alternatively, please reach out to Toni-Marie Monks at E3 recruitment.....Read more...
Senior SAP Analyst position available working for a global industry leader within engineering and chemical manufacturing paying up to £80,000 plus many additional benefits! The roles plays an integral part in providing a strategic and operational bridge between IT and business functions to ensure seamless design, delivery and optimisation of SAP.
A globally leading engineering company, which specialise in the manufacture of speciality chemicals, in Warrington are seeking an experienced Senior SAP Analyst to take end-to-end ownership of its SAP landscape across multiple manufacturing plants and legal entities supporting oil & gas and chemical operations.
Salary and Benefits of the Senior SAP Analyst
Annual Salary Between: £75,000 - £80,000 (DOE)
25 Days Annual Leave + 8 Bank Holidays
Company Pension Scheme
Private Medical Insurance
Life Assurance Policy
Free Onsite Parking
The Role of Senior SAP Analyst
The role is accountable for SAP strategy, architecture, delivery, and operational stability, ensuring system integrity, data quality, regulatory compliance, and measurable business value. The SAP Manager will lead SAP solution design and governance across core business processes including Order-to-Cash, Procure-to-Pay, Production & Quality, Warehouse & Logistics and Finance & Controlling.
Key Responsibilities of the Senior SAP Analyst:
Define and deliver a rolling 24-month SAP roadmap covering enhancements, upgrades, security, and system integrations.
Own SAP solution architecture across plants, shipping points, and third-party warehouses.
Ensure architecture documentation, cyber posture, and technical standards are audit-ready.
Own SAP run operations across internal teams and external service providers.
Establish proactive monitoring, incident runbooks, and SLA governance.
Lead major incident response, root cause analysis, and corrective actions.
I Am Keen To Speak To Candidates With The Following Experience…
A Bachelor’s degree in information, systems, computer science, business or a related field.
Strong background with SAP FICO (Financial Controlling)
SAP Certifications (e.g. SD/MM/PP/QM/EWM/FI-CO, SAP Security, GRC)
Previous experience of maintaining SAP ECC 6.0 and mastery of SD with advanced knowledge of FI, CO and MM in complex manufacturing environments.
Strong background in Process Manufacturing environments.
Deep functional expertise across SD, MM, PP, QM, WM/EWM, FI/CO
Proven experience with SAP MDG, data governance, and SAP Security / GRC / SoD
Strong SAP solution design, integration, and troubleshooting capability
Experience leading SAP vendors and system integrators
How to Apply: To apply for the role of Senior SAP Analyst, please submit your CV direct. Alternatively, reach out to Toni-Marie Monks at E3 Recruitment for more information.
....Read more...
Control and monitor a process or plant and equipment, effectively, efficiently and securely, and resolve problems or correct abnormal conditions
Complete documentation relevant to the manufacturing process
Work safely in a science manufacturing environment
Understand and follow quality procedures
Participate in continuous performance improvement projects
Training Outcome:
Operator
Lead Operator
Team Leader
Operations Manager
Employer Description:Solenis is a leading global producer of speciality chemicals for water-intensive industries, including the pulp, paper, oil and gas, chemical processing, mining, biorefinery, power and municipal markets. The company’s product portfolio includes a broad array of process, functional and water treatment chemistries as well as state-of-the-art monitoring and control systems.Working Hours :Monday to Friday - may include some shift work towards the end of the apprenticeship.Skills: Communication skills,IT skills,Attention to detail,Organisation skills,Problem solving skills,Logical,Team working....Read more...
Sample preparation.
Chemical analyses such as titrations, gravimetric analyses, use of ion selective electrodes and spectroscopy in accordance with accredited methods and quality procedures. Training is given internally on each method and technique as the requirement arises.
Preparation of reagents, standards, and glassware.
Data input - booking in samples and general administration of the sample throughput.
Ensure all safety and quality standards are met.
Ad hoc duties as required.
Training:Over 18 months, you’ll devote a minimum of 6 hours of your working week on ‘off the job’ training. This can include theory training (for example, virtual lessons & online learning), alongside practical training (for example shadowing, mentoring, & time spent writing assignments. Together this will count towards a Level 3 Materials Technician apprenticeship.
You’ll be trained by an expert tutor from Tiro as well as an experienced mentor at Quartz Scientific who together, will make sure you develop the knowledge, skills, and work habits you’ll need to succeed in your career.Training Outcome:When you join Quartz Scientific, the possibilities for your success are limitless. As a successful applicant, you have the potential to secure a full-time position within the company at the conclusion of your apprenticeship.
Through practical, on-the-job training, you will develop new skills and gain the competence and responsibility required for materials testing and analysis. This apprenticeship serves as a stepping stone towards a rewarding career in materials science, with the added opportunity for the apprentice to become a registered Science Technician (RSci Tech).
This programme opens up a variety of career pathways across industries including construction materials, civil engineering, geotechnical investigation, environmental consultancy, and infrastructure development, ensuring your materials science skills are in demand across multiple sectors.
This apprenticeship can also help pave the way for further educational and professional advancement. You may choose to pursue higher-level qualifications through one of our Degree Apprenticeships such as a Bachelor of Science (BSc) in Applied Materials Science. Employer Description:Quartz Scientific has over 30 years’ experience as an independent UKAS accredited laboratory providing chemical analysis and consultancy to the construction industry. Services provided include tests for aggregates, paint, gypsum plasters and water for concrete.
We are a hard-working team, whose laboratory provides its services to construction projects of all scales, in both the public and private sectors, within the Greater London area and beyond.
Technological advances in the industry and the requirement during restoration of historical buildings to use identical materials continue to make demands on the analysis of samples and the interpretation of results. Established in 1991 and UKAS accredited in 1995, Quartz Scientific has the depth of knowledge and experience to keep pace with these changes and they continue to occur. Working Hours :Typical workings hours are 40 hours per week (9:00am - 5:30pm, Monday to Friday, half an hour for lunch). If the workload dictates, working hours can be requested anytime between 7:00am and 9:00pm. Weekend overtime, as necessary.Skills: Attention to detail,Organisation skills,Problem solving skills,Analytical skills,Logical,Team working,Initiative....Read more...
Work safely in a laboratory, maintaining excellent housekeeping whilst following appropriate safety, environment and risk management systems
Follow quality procedures to meet the requirements of quality standards relevant to the workplace
Prepare for laboratory tasks using the appropriate scientific techniques, procedures and methods
Perform laboratory tasks following specified methodologies, such as Standard Operating Procedures
Use of specified instrumentation and laboratory equipment, including calibration where required
Produce reliable, accurate data and keep accurate records of laboratory work undertaken and results
Analyse, interpret and evaluate data and identify results requiring further investigation seeking advice of senior colleagues as appropriate
Communicate scientific information appropriately, including the use of Laboratory Information Management systems, either digital or paper based
Apply scientific techniques for data presentation. e.g. statistics.
Recognise problems and apply appropriate scientific methods to identify causes and achieve solutions
Participate in continuous business performance improvement
Routine maintenance and cleaning of equipment and laboratory
Managing workflows to ensure that work is delivered on time
Liaison with internal and external customers
Any other duties required by the business
Training:Over 18 months, you’ll devote a minimum of 6 hours of your working week on ‘off the job’ training. This can include theory training (for example, virtual lessons & online learning), alongside practical training (for example shadowing, mentoring, & time spent writing assignments. Together this will count towards a Level 3 Laboratory Technician apprenticeship.
You’ll be trained by an expert tutor from Tiro as well as an experienced mentor at Avon Protection who together, will make sure you develop the knowledge, skills, and work habits you’ll need to succeed in your career.Training Outcome:When you join Avon Protection, the possibilities for your success are limitless. As a successful applicant, you have the potential to secure a full-time position within the company at the conclusion of your apprenticeship.
Through practical training on the job, you will acquire new skills and gain the competence and responsibility required for laboratory testing. This apprenticeship program serves as a stepping stone towards a rewarding career in laboratory testing, with the added opportunity for the apprentice to become a registered Science technician (RSci Tech).
This program unlocks a multitude of career paths, granting you access to diverse organisations across various sectors. Whether it's the chemical and pharmaceutical industries (primary and secondary), biotechnology companies, nuclear enterprises, analytical science services, or educational institutions, the doors are wide open.
This apprenticeship can also help pave the way for further educational and professional advancement. You may choose to pursue higher-level qualifications through one of our Degree Apprenticeships such as Applied Chemical Science.Employer Description:Avon Protection is an innovative capability provider specializing in the design, development, testing and manufacture of integrated protective systems.
Our portfolio of mission-critical protection solutions includes full face respirators, CBRN protective wear, escape hoods, SCBA systems, modular PAPR units, thermal imaging cameras and underwater equipment.Working Hours :08:30 to 17:00, Monday to Thursday. 08:30 to 16:00, Friday.Skills: Communication skills,Attention to detail,Organisation skills,Problem solving skills,Analytical skills,Logical,Team working,Initiative....Read more...
JOB DESCRIPTION
As our Mechanic you will be to keep machines, mechanical equipment, or the structure of the facility in repair by Pipe fitting; boiler making; insulating; welding; machining; carpentry; repairing electrical or mechanical equipment; installing, aligning, and balancing new equipment; and repairing buildings, floors, or stairs. Solving challenges is the very foundation of who we are. After all, in the beginning, our founder, sea captain Robert Fergusson, didn't particularly care about paint. When he founded our company in 1921, he just wanted to keep his ship intact and stumbled upon a valuable solution. Today, that discovery is Rust-Oleum Corporation. The same passion that drove the Captain to spend his next few years creating the world's first rust-preventative paint still drives us today. When we see a problem, we work diligently until we've perfected a solution, which has led to some of the most cutting edge, durable and innovative products in the industry. Our creative and talented team of over 2000 people across every corner of the world, help us remain the global leader in protective paints and coatings for both home and industry. Here's what you can expect every day: Repair or replace defective equipment parts, using hand tools and power tools, and reassemble equipment. Perform routine preventive maintenance to ensure that machines continue to run smoothly, building systems operate efficiently, or the physical condition of buildings does not deteriorate. Follow checklists to inspect drives, motors, and belts, check fluid levels, replace filters, or perform other maintenance actions. Use tools ranging from common hand and power tools, such as hammers, hoists, saws, drills, and wrenches, to precision measuring instruments and electrical and electronic testing devices. Assemble, install or repair wiring, electrical and electronic components, pipe systems, machinery, and equipment. Diagnose mechanical problems and determine how to correct them, checking blueprints, repair manuals, and parts catalogs as necessary. Inspect, operate, and test machinery and equipment to diagnose machine malfunctions. Record type and cost of maintenance or repair work. Clean and lubricate shafts, bearings, gears, and other parts of machinery. Dismantle devices to access and remove defective parts, using hoists, cranes, hand tools, and power tools.
Required Skills:
3+ years of maintenance experience in manufacturing environment; preferably in chemical/paint manufacturing High School Diploma or equivalent Must have expertise in packaging equipment, plumbing, and pipefitting, with skills in electrical work and instrument calibration considered a definite plus Demonstrated ability to diagnose and troubleshoot complex packaging and material-handling equipment is required Ability to do basic math. Accurately enter and retrieve computer data. Ability to operate machinery Ability to solve problems in a team environment. Active participation in our Continuous Improvement Process. Ability to consistently lift 50 pounds. Willing to work overtime as required.
Additional Consideration Given to Those With:
Exposure to quality programs Paint/Coatings/chemical industry knowledge or experience Experience with a continuous process discipline such as Six Sigma/Lean/TQM manufacturing environment. Previous experience with safety programs Rust-Oleum is an equal opportunity employer. Employment selection and related decisions are made without regard to sex, race, age, disability, religion, national origin, color, or any other protected class.Apply for this ad Online!....Read more...
A new opportunity has become available for a Dental Nurse to join an established, mixed practice located in Reigate, Surrey.Start date - As soon as possible. This role is to work full time, 4-5 days per week. Main Purpose of the job:Provide clinical assistance to practice clinicians, work with little to no supervision and carry out duties to the highest standard.Key Responsibilities:· prepare and maintain the clinical environment, including the equipment· carry out infection prevention and control procedures to prevent physical, chemical and microbiological contamination in the surgery or laboratory· record dental charting and oral tissue assessment carried out by other registrants· prepare, mix and handle dental biomaterials· provide chairside support to the operator during treatment· keep full, accurate and contemporaneous patient records· prepare equipment, materials and patients for dental radiography· process dental radiographs· monitor, support and reassure patients · support the patient and their colleagues if there is a medical emergencyFully equipped and computerised using Dentally software. Salary - £15 per hour start (3 month probation)Payable car parking in the area, Reigate station is around 15 minutes walk. In order to apply, candidates must be fully qualified and GDC registered.....Read more...
JOB DESCRIPTION
We are currently looking for an individual to fill a Temporary Batch Maker position at our manufacturing plant in Medina, Ohio. If the employee meets certain criteria over a period of time, this position could become a regular full-time position.
Duties/Responsibilities, Core knowledge:
Handles batch making responsibilities in all departments
Trained to make all formulations i.e. Roof coating, Latex, and Solvent departments
Responsible for housekeeping in the work area
Reports raw material/equipment needs to Production Manager
Helps maintain inventory levels/cycle counts
Fills batches according to need i.e. 1's, 5's, 55's or totes (domestic or export)
Operates tow motor
Shop floor reporting
Submit a batch sample to QC lab for approval and retain before filling
Skills, Qualifications, Experience, Special Physical Requirements:
Computer literacy is required, a basic understanding of SAP is helpful.
Able to work independently in a team-based lean/six sigma environment and contribute to the team's overall success.
Preferred background in the Chemical Industry with batch-making experience.
Demonstrated safe work record
Demonstrated reliable attendance
Qualified applicants will receive consideration for employment without regard to their race, color, religion, national origin, sex, sexual orientation, gender identity, protected veteran status or disability.Apply for this ad Online!....Read more...
Support the Environment Team to help the site meet environmental laws and company requirements, covering areas such as permits, waste, emissions, noise, and environmental management systems.
Help carry out environmental monitoring (such as air emissions and noise) and assist with collecting and reporting the results.
Collect, track, and report environmental performance data, and support projects that help improve environmental performance.
Help create environmental communications and support the delivery of environmental training to raise awareness of key topics.
Take part in environmental inspections, audits, and regulator visits, and help investigate and fix any issues found.
Assist with investigating environmental accidents and incidents, helping to identify causes and prevent them from happening again.
Attend and take part in quarterly Environmental, Health & Safety (EHS) committee meetings.
Training Outcome:
Environmental Technician.
Environmental Manager.
Employer Description:Solenis is a leading global producer of speciality chemicals for water-intensive industries, including the pulp, paper, oil and gas, chemical processing, mining, biorefinery, power and municipal markets. The company’s product portfolio includes a broad array of process, functional and water treatment chemistries as well as state-of-the-art monitoring and control systems.Working Hours :Monday to Friday, shifts to be confirmed.Skills: Communication skills,IT skills,Organisation skills,Problem solving skills,Analytical skills,Logical,Team working....Read more...
An exciting opportunity has arisen for an Account Manager to join a well-established company providing aerosol products to healthcare, personal care, and technical sectors.
As an Account Manager, you will be responsible for managing key accounts, driving profitability, and strengthening long-term client relationships.
This is a permanent role offering a salary of up to £38,000 plus commission and benefits.
You will be responsible for
? Developing and implementing account plans to identify growth opportunities, manage pricing, and oversee project pipelines.
? Taking full ownership of strategic client accounts, ensuring service excellence and customer satisfaction.
? Driving revenue through new business development, upselling, cross-selling, and introducing innovative solutions aligned with client requirements.
? Monitoring account performance, including sales forecasts, demand planning, and profit & loss management, delivering against KPI targets.
? Acting as the primary point of contact for key accounts, resolving issues, managing escalations, and coordinating with internal teams to ensure smooth operations.
? Representing the organisation at client meetings, site visits, and industry events to reinforce strategic relationships.
What we are looking for
? Previously worked as an Account Manager, Sales manager, Business Development Manager or in a similar role.
? Proven experience of 2 years in Key Account Management.
? Preferably worked within manufacturing, pharmaceutical, or chemical sectors.
? Strong skills in account planning, commercial negotiation, and client relationship management.
? Highly organised, capable of managing multiple priorities and projects simultaneously.
? Confident communicator with the ability to engage effectively with senior stakeholders.
This is an excellent opportunity to join a dynamic organisation and make a significant impact in a key account management role.
Important Information: We endeavour t....Read more...
The business is looking for an Apprentice to train alongside our existing experienced team of Process Operators. As an apprentice, you will study a range of programmes working towards a Process Industry Manufacturing Technician L3 Apprenticeship standard, covering a variety of skills and qualifications while earning a wage and completing invaluable practical skills in industry. You will be working alongside a mentor and assisting the experienced process shift team with the following duties:
Main Duties and Responsibilities:
Start up and shut down the plant process as per operating procedures
Operating the plant and process within the set production and safety parameters
Take samples as per the sampling schedule and procedure
Complete daily logs and make notes of operational events, and communicate with the Shift Team Leader and the oncoming shift team
Assist in the commissioning of new plant and equipment
Carry out permit to work isolations, de-isolations
Report any Health and Safety issues/incidents via the CATS reporting system
Report any Engineering issues via the MAXIMO work order system
Ensure good housekeeping standards are maintained on the plant.
Other responsibilities:
Ensure correct stock control of any raw materials used on plant
Ensure control of emergency equipment and PPE in the area
Ensure correct control of any waste streams and assist in the management of the controlled waste zone
Initially, you will be based at the CATCH facility (Immingham) followed by being on site following a shift pattern. However, whilst apprentices are required to work both day and night shifts, individual arrangements will be provided to facilitate day release for college attendance if required.
Transport to the college is provided, and there are two pick-up points: Hull Bus Station, Humber Bridge. Following block training at CATCH you will be based at the Hull plant, Saltend, Hedon, Hull, HU12 8DS.
There will be some working at height and in confined spaces, with PPE required when working with chemicals. This is a 24/7 industry:
This position will involve shift work once initial training is undertaken, and agreed shift allowances will be paid at this time.
*New applicants who meet the entry requirements of the role will be contacted by the Apprentice Employment Agency team to discuss their application and the apprenticeship in further detail. Please ensure you provide up-to-date contact details and check your junk folder in case of redirected emails. Failure to respond to communications will result in your application being withdrawn.Training:During this three-year programme, you will undertake 'off the job' training at CATCH Training Centre, Stallingborough, for the first 10 months, followed by the remaining duration onsite, where you will receive specific on-the-job training by an experienced mentor/supervisor/line manager.
You will also be supported by a dedicated assessor who will guide and mentor you throughout your apprenticeship.
You will undertake the Process Industry Manufacturing Technician L3 Standard Apprenticeship, and you will be required to undertake an end-point assessment.
Apprentices must complete a level 3 or 4 qualification in a science or technology discipline relevant to their occupation prior to completing the apprenticeship’s end-point assessment.
Successful achievement of the end-point assessment will lead to final certification of the apprenticeship.Training Outcome:Progression to Process Technician / Shift Team Leader and beyond, subject to performance.Employer Description:SoarnoL™ (EVOH) is produced in Europe at Mitsubishi Chemical UK facility in Hull, UK. Additional facilities are located in Japan and America. Formally Nippon Gohsei UK Limited, now part of the Mitsubishi Chemical global Company.Working Hours :Monday-Friday / Shift Rota once on site. Due to shifts and insurance purposes, you must be over 18.Skills: Communication skills,IT skills,Attention to detail,Organisation skills,Customer care skills,Problem solving skills,Presentation skills,Administrative skills,Number skills,Analytical skills,Logical,Team working,Creative,Initiative,Non judgemental,Patience,Physical fitness,Enthusiastic,Punctual....Read more...
Corus is hiring for an immediate position in Belfast for a Cleaner.
Responsibilities:
General Cleaning: Sweeping, mopping, vacuuming, and dusting classrooms, corridors, and communal areas.
Sanitisation: Cleaning and disinfecting high-touch surfaces such as door handles, light switches, and shared toilets.
Waste Management: Emptying bins and ensuring rubbish is disposed of according to site regulations.
Supplies & Equipment: Maintaining cleaning tools and refilling consumables like toilet paper, soap, and hand towels.
Safety Compliance: Adhering to health and safety procedures, including COSHH (Control of Substances Hazardous to Health) for chemical use.
If Interested please contact Madhu - 07375920222....Read more...
Corus is hiring for an Immediate start DBS Cleaner in Hamilton, South Lankershire.
Mon, Wed, Thurs - 8:30-10:15
Responsibilities:
General Cleaning: Sweeping, mopping, vacuuming, and dusting classrooms, corridors, and communal areas.
Sanitisation: Cleaning and disinfecting high-touch surfaces such as door handles, light switches, and shared toilets.
Waste Management: Emptying bins and ensuring rubbish is disposed of according to site regulations.
Supplies & Equipment: Maintaining cleaning tools and refilling consumables like toilet paper, soap, and hand towels.
Safety Compliance: Adhering to health and safety procedures, including COSHH (Control of Substances Hazardous to Health) for chemical use.
DBS Cirtificate.
1 Year Employement History check.
If interested contact Madhu(07375920222)....Read more...
Interesting pathology in an even more interesting location Where you’ll be working You will be based in the lab of a tertiary level hospital, servicing a network of six public hospital laboratories. The laboratory is classified as a Category GX laboratory and is responsible for providing supervision and support to the other five regional (Category B) laboratories. The service includes microbiology (bacteriology, mycobacteriology, mycology, molecular microbiology, parasitology, and serology), anatomical pathology, chemical pathology, haematology, blood transfusion, forensic pathology and genomics. The tropical location combined with a patient population ensures medical staff are exposed to a wide range of interesting and varied clinical presentations. The Job Dates: ASAP - ongoing Hours: Mon-Fri 8 hours per day Rate: $2500 per day Provisions: Travel, accommodation and hire car provided Requirements General Anatomical Pathology experience Fellowship of the Royal College of Pathologists of Australasia (FRCPA) About us Elective Recruitment is a person-centred recruitment consultancy. Your career progression is just as important to us as is your wellbeing and work-life balance. We are not just another recruitment company; we do things our way and we consult. We have a very clear vision: create great careers, better lifestyles, add value - and we won’t stop until this is achieved. For access to locum pathologist jobs in Australia join our network today. For a confidential discussion contact the Elective Recruitment Team at +61 2 9137 4300, or apply now! ....Read more...
GENERAL OPERATIVE, Pocklington YO42, TO START ASAPWe are recruiting for a Line Operative to join an established manufacturing business in Pocklington, near York. This is a great opportunity to join a growing company and develop into running your own production line once fully trained.Role Responsibilities:
Operate production machinery, including liquid and powder filling linesCarry out quality control checks to maintain product standardsWork safely, following all chemical, process and occupational safety proceduresMaintain a clean and tidy work areaOperate mechanical handling equipment including counterbalance forklifts and pallet trucks (training provided if required)Support different areas of the production process as requiredWork on a rotating shift pattern
What We’re Looking For:
Good safety awareness and willingness to follow proceduresAbility to work rotating shiftsReliable, positive and willing to learnComfortable with some manual liftingExperience in production or forklift operation is useful but not essential
*Hours:Week 1: Monday to Friday, 06:00–14:00Week 2: Monday to Thursday, 13:45–23:45Pay: £12.86 - £14.79 per hour Depending on shiftThis is a temp-to-perm position with long-term opportunities.Apply now if you are available to start immediately.Due to our clients location you need to have own transport unless you live in Pocklington.Aqumen Business Solutions is acting as an Employment Business in relation to this vacancy.....Read more...
A globally leading chemical manufacturing company located in Lincolnshire is seeking a Reliability Engineer to join their team, offering a salary of up to £73,000 per annum. The comprehensive benefits package includes a double-figure pension, annual bonus, hybrid working options, private medical insurance, and 25 days of annual leave plus bank holidays including numerous other incentives.As a Mechanical Reliability Engineer, you will be accountable for executing the asset integrity program and providing professional engineering support for the maintenance and reliability of mechanical systems. You will play a leading role in identifying and implementing mechanical improvements to enhance maintainability, safety, production rate and quality, and reduce costs—all while ensuring compliance with site standards and external regulatory requirements.Reliability Engineer Responsibilities
Lead and manage improvement projects, optimising maintenance strategies and ensuring long-term asset integrity.
Conduct root cause analysis (RCA/RCFA) and troubleshooting to resolve failures and improve plant reliability.
Establish and oversee predictive and non-destructive testing programs, including vibration, thermography, and oil analysis.
Represent maintenance in design and installation of new or modified equipment, ensuring compliance with statutory and site standards.
Support cost reduction and lifecycle management by analysing maintenance costs, assessing equipment criticality, and recommending upgrades or replacements.
We are seeking a motivated individual with a Mechanical Engineering degree, preferably chartered or working towards chartered status, and membership of IMechE. Experience in continuous process manufacturing, ideally within a top-tier COMAH site, is essential. You will have demonstrable knowledge of legislative process safety systems, predictive and preventative maintenance strategies, and the ability to lead improvement initiatives.Please apply direct for further information regarding this Reliability Engineer opportunity.....Read more...
JOB DESCRIPTION
The Senior R&D Scientist will lead and contribute to cutting-edge research and development initiatives to drive innovation in products, processes, and technologies within DAP Global Inc. This position involves working on complex scientific challenges, researching new technologies, developing new product formulations, and collaborating with cross-functional teams. The Senior R&D Scientist will play a key role in advancing product development, optimizing manufacturing processes, and ensuring that new technologies meet performance, quality, safety, and regulatory standards. The position requires advanced scientific expertise, project leadership skills, and the ability to mentor junior scientists.
This Senior R&D Scientist position is in the Technology Development team which is responsible for early-stage research and development of technologies new to DAP Global Inc, significant technical advancements within DAP's core technologies, and/or development of technology platforms or capabilities that extend across multiple product categories.
Responsibilities
Develop creative technical solutions to Innovation challenges and design and execute the necessary experimental plans for technology development projects or new product development. Independently perform detailed analysis of experimental results. Demonstrate expert formulation capability, advanced problem-solving in complex projects, identification of bottlenecks, and innovative strategies.
Demonstrate detailed conceptual and operational knowledge of analytical and material characterization technique capabilities, generate high quality data, and perform detailed analysis of the data generated.
Lead and manage R&D projects from concept through commercialization, ensuring projects are completed on time, within budget, and aligned with company goals.
Oversee the preparation and maintenance of technical documentation, including research protocols, product specifications, test reports, and regulatory submissions.
Independently assemble information for and generate highly effective written reports and oral presentations to effectively communicate complex technical results to a wide variety of stakeholders including R&D personnel and cross-functional teams.
Ensure all R&D activities comply with relevant regulatory requirements, industry standards, and best practices
Contribute to continuous improvement initiatives by identifying and implementing new techniques, tools, and processes that enhance productivity and innovation.
Exhibit leadership in laboratory safety practices and participate in all safety and housekeeping initiatives.
Requirements / Qualifications
A Ph.D. in Chemistry, Chemical Engineering, Materials Science, Polymer Science, or a related field.
0-2 years post-PhD, no prior industry experience required.
Advanced knowledge of scientific principles, product development, and manufacturing processes.
Expertise in designing and conducting experiments, data analysis, and interpreting scientific results.
Proficiency in using general scientific software, data analysis tools, and laboratory equipment.
Experience in managing large data sets along with implementation and use of Artificial Intelligence agents to solve Chemistry, Materials Science, or Chemical Engineering problems.
A passion for learning, chemistry, and material sciences.
Benefits
Medical, Dental and Vision Insurance
Company Provided Life Insurance
Paid Time Off (PTO)
Company-paid short-term and long-term disability
401(k) plans
Employer-funded pension plan
Tuition Reimbursement
Pay Range
$95,000 to $125,000 per year.
About DAP
DAP is a market leading manufacturer, innovator and marketer of home repair and construction products including caulks, sealants, spray foam insulation, adhesives, and patch and repair products. DAP is part of RPM International Inc., a $7.3 billion, multinational company with subsidiaries that are world leaders in specialty coatings, sealants, building materials and related services.
You will find DAP products in the hands of professional painters, remodelers, builders, and do-it-yourselfers, and in 60,000 retail outlets, ranging from home centers and mass merchandisers to your local hardware, pro contractor channels and paint stores. DAP's eight manufacturing and distribution facilities in the United States of America and Canada service North America and the world.
At DAP, we hire the best people and give them a collaborative and rewarding work environment that empowers them to succeed! We support associates in continuous professional growth and collaborate on the steps it takes to get to the next level in their careers. Our associates enjoy a comprehensive benefits package including 401(k) with company match, pension, paid parental leave, competitive health insurance rates, employee stock purchase plan, tuition reimbursement, free wellness programs and more! Learn more about DAP's history, culture and benefits at www.dap.com/careers/
DAP - On the job since 1865Apply for this ad Online!....Read more...
JOB DESCRIPTION
Tremco Construction Products Group brings together Tremco CPG Inc.'s Commercial Sealants & Waterproofing and Roofing & Building Maintenance divisions; Tremco Barrier Solutions Inc.; Dryvit, Nudura, and Willseal brands; Prebuck LLC; Weatherproofing Technologies, Inc.; Weatherproofing Technologies Canada and PureAir Control Services, Inc. Altogether, Tremco CPG companies operate 21 manufacturing facilities, 6 distribution sites, and 3 R&D/technology sites, and employ more than 2,700 people across North America.
GENERAL PURPOSE OF THE JOB:
The Maintenance Supervisor has the direct responsibility for leadership of the maintenance department, as well as maintaining and upgrading the site facilities and production equipment. In addition, this position is responsible for the management of the Preventive Maintenance Program.
TREMCO'S EXPECTATIONS FOR ALL LEADERS:
Embodies the company's core values of transparency, trust, and respect by demonstrating integrity, commitment, responsible entrepreneurship, and moral courage.
Applies the company's policies and adheres to processes to ensure compliance and organizational best practices.
Demonstrates a commitment to diversity, equity, and inclusion in all areas of responsibility, such as hiring and promotion decisions.
Effectively and efficiently onboards new employees.
Conducts annual performance evaluations and provides ongoing performance feedback, maintaining clear and timely documentation.
Coaches and manages employees using the company's philosophy and tools to ensure talent is developed and retained. Constructs succession plans to ensure the sustainability and continuity of the area of responsibility.
ESSENTIAL DUTIES AND RESPONSIBILITIES:
Coordinate and direct maintenance projects, making detailed plans to accomplish goals and direct the integration and implementation of technical activities.
Support the HS&E, Quality and Service, and Productivity/Cost sections of the facility plan as defined by scorecard activities.
Plan and direct the installation, testing, operation, maintenance, and repair of facilities and equipment.
Manage the Preventive Maintenance Program to ensure it reduces downtime and improves the overall reliability of production and production-supporting machinery.
Support capital project requirements for review and submission to management, including costs, schedule, and procedures.
Direct, review, and approve product design and changes consistent with Management of Change (MOC) procedures.
Analyze annual utility expenditures and develop a plan to optimize efficiency and reduce costs.
Perform administrative functions such as reviewing and writing reports, approving expenditures, and making decisions about the purchase of materials or services.
Investigate equipment failures and difficulties to diagnose faulty operation and work with the maintenance crew to implement the needed preventative measures.
Recommend design modifications to eliminate machine or system malfunctions.
Demonstrate a commitment to diversity in hiring and promotion decisions.
Effectively and efficiently onboard new employees.
Conduct annual performance evaluations and provide ongoing performance feedback, maintaining clear and timely documentation.
Coach and manage employees using CS&W philosophy and tools to ensure talent is developed and retained.
Apply Tremco policies and adhere to processes to ensure compliance and organizational best practices.
EDUCATION REQUIREMENT:
High school diploma or general education degree (GED).
EXPERIENCE REQUIREMENT:
A minimum of 5 years of maintenance experience in a manufacturing environment. Familiarity with plant safety practices, chemical processes, equipment maintenance, statistical applications, and equipment operations is also required.
OTHER SKILLS, ABILITIES, AND QUALIFICATIONS:
Knowledge of the practical application of sound engineering and chemical plant practices. This includes applying engineering principles and techniques to process design for the production of products and intermediates.
Knowledge of arithmetic, statistical methods, "Lean" concepts, ISO procedures, and their applications.
Ability to apply Excel, Word, and SAP applications to daily job responsibilities with an emphasis on system-driven solutions.
PHYSICAL DEMANDS:
Incumbent must be able to stand, walk, sit, use hands, reach, climb, balance, kneel, talk, hear, and lift up to 50 lbs.
BENEFITS AND COMPENSATION:
The Company offers a variety of benefits to its employees, including but not limited to health insurance, paid holidays, paid time off, 401(k) Savings and Trust & Plan with company match, Company Pension Plan, Performance-Based Bonus/Commission, and continuing education.
All qualified applicants will receive consideration for employment without regard to their race, color, religion, sex, sexual orientation, gender identity, national origin, disability or veteran status.Apply for this ad Online!....Read more...
JOB DESCRIPTION
The Buyer is responsible for procuring raw materials, finished goods, lab and office supplies, and indirect materials to support production, operations, and administrative needs. This role will manage vendor relationships, coordinate with internal departments, ensure timely supply chain activities, and provide purchasing support for multiple business units, including Corsicana and Agricultural (Ag) operations. The Buyer will also provide administrative support and act as a backup for customer order processing when needed.
Main Responsibilities:
Handle all vendor-related issues, including managing price lists, raw material shortages, price discrepancies, new raw materials, setting up new vendors, and securing documentation from new vendors for setup in internal company systems. Provide support for toll blenders for finished goods production, including placing purchase orders and supplying necessary supporting documentation (SDS and batch sheets). Request and review quotes for new lab equipment purchases and other capital expenditures, while maintaining lab supplies and other inventory on a daily, weekly, and monthly basis. Provide internal support for Accounts Payable by coding and approving invoices within internal company systems as needed. Backup customer service support, including reviewing and placing customer orders, communicating orders to manufacturing and production sites, following-up on production statuses, and updating customers accordingly. Support other areas and departments from an administrative perspective, including providing support for trade shows, industry memberships, and internal shared email addresses.
Key Qualifications:
Associate's Degree in Business, Supply Chain, or other related field. Bachelor's Degree in similar field preferred. 3+ years of administrative and purchasing/procurement experience, with preference given to candidates with experience in a manufacturing environment or related chemical industry. Strong planning/organizational skills, interpersonal skills, problem-solving ability, and negotiation skills. Apply for this ad Online!....Read more...
Corus is hiring for a Cleaning operative in Gloucester.
3-7PM Mon-Fri
Responsibilities:
General Cleaning: Sweep, mop, vacuum, and dust all designated areas, including floors, furniture, and fixtures.
Sanitisation: Thoroughly clean and disinfect washrooms, communal kitchens, and high-touch points like door handles and light switches.
Waste Management: Empty litter bins and dispose of waste in accordance with site procedures.
Stock Control: Monitor and replenish cleaning supplies such as soap, paper towels, and chemical detergents.
Equipment Care: Safely operate and maintain manual and powered equipment (e.g., buffers, vacuums) and store them correctly after use.
Reporting: Notify supervisors of any maintenance issues, damages, or safety hazards observed during shifts
If interested Contact Madhu - 07375920222....Read more...
Corus is hiring for a DBS Cleaner in Gloucestershire.
4-5PM Mon-Fri
Responsibilities
General Cleaning: Sweep, mop, vacuum, and dust all designated areas, including floors, furniture, and fixtures.
Sanitisation: Thoroughly clean and disinfect washrooms, communal kitchens, and high-touch points like door handles and light switches.
Waste Management: Empty litter bins and dispose of waste in accordance with site procedures.
Stock Control: Monitor and replenish cleaning supplies such as soap, paper towels, and chemical detergents.
Equipment Care: Safely operate and maintain manual and powered equipment (e.g., buffers, vacuums) and store them correctly after use.
Reporting: Notify supervisors of any maintenance issues, damages, or safety hazards observed during shifts
DBS cirtificate.
1 year employement history.
If interested, please contact Madhu-07375920222....Read more...
Corus is hiring for DBS cleaner in Witney, Oxfordshire.
9:30-11AM- Mon-Fri
Responsibilities:
General Cleaning: Sweep, mop, vacuum, and dust all designated areas, including floors, furniture, and fixtures.
Sanitisation: Thoroughly clean and disinfect washrooms, communal kitchens, and high-touch points like door handles and light switches.
Waste Management: Empty litter bins and dispose of waste in accordance with site procedures.
Stock Control: Monitor and replenish cleaning supplies such as soap, paper towels, and chemical detergents.
Equipment Care: Safely operate and maintain manual and powered equipment (e.g., buffers, vacuums) and store them correctly after use.
Reporting: Notify supervisors of any maintenance issues, damages, or safety hazards observed during shifts
DBS Cirtificate.
1 year Employement history check.
If interested contact- Madhu-07375920222....Read more...
Electrical Assembler vacancy available in Leeds offering an incredible annual bonus (£6K on average for the last 5 years), 7% employer pension contribution, 35 holidays, company share schemes and £400 annual holiday payment allowance. This employee-owned engineering/manufacturing organisation offers end-to-end design, manufacture, installation and service solutions to a variety of industries, including FMCG, Chemical & Pharmaceutical, Retail, Logistics and General Manufacturing. Initially established in the 1970s; 50 years later, they now employ around 80 people across the UK.Key Responsibilities of the Electrical Assembler will include:
Modifying and reconfiguring pre-made Control Panels, installing circuit breakers, relays, power supplies etc
Cable related tasks, such as looming, crimping, terminating and wiring
Building & assembling specialist equipment including dehumidifiers and motors when required for large projects
Reading, interpreting and working directly from schematics, wiring diagrams and drawings
Working Hours of the Electrical Assembler: 39 Per week, spread across a regular day shift
Monday to Thursday – 07:30 to 16:00
Friday – 07:30 to 15:00
In return, the Electrical Assembler will receive:
Starting Salary: £26,850.72 (£13.24 per hour)
Annual Bonus: Annual profits shared throughout ALL employees – this has been £6,000.00 on average over the last 5 years (£9,000.00 in 2024)
Holiday entitlement: 35 days per annum (25 free choice + bank holidays + birthday + 2x ½ days at Christmas) + £400 Annual holiday allowance
7% Employer pension contribution – 0 employer contribution required
Permanent employment with a long-established manufacturing organisation
To apply for this position, please click “Apply Now” and attach a copy of your CV. Alternatively, please contact Callum Good at E3 Recruitment....Read more...
