Test Technician Jobs   Found 79 Jobs, Page 1 of 4 Pages Sort by: Relevance Date

Test Technician

An exciting opportunity for an experienced Test Technician, Bedford, Bedfordshire is available to lead a high-performing team within a fast-paced electronics manufacturing environment. The Test Technician, Bedford, Bedfordshire role is responsible for testing and certifying electronic products, identifying faults through fault finding and troubleshooting techniques. The Key Responsibilities for the Test Technician, based in Bedford include; Set-up and perform test procedures for electronic boards Operate flying probe, ATE and JTAG. Perform fault-finding and troubleshooting on electronic products The successful candidate for the Test Technician, Bedford, Bedfordshire will have a proven background in; Previous experience in electronic / PCB testing Ability to read and follow technical electronic instructions and procedures APPLY NOW for the Test Technician, Bedford, Bedfordshire, by sending your CV to TDrew@redlinegroup.Com quoting ref. THD1346. Otherwise, we always welcome the opportunity to discuss other roles similar to Test related jobs on 01582 878 848 or 07961158762. ....Read more...

Electronic Test Technician

Are you looking for an Electronic Test Technician job in Mansfield, working for a global leading supplier of connectors and cables, for the Defence & Aerospace industry? The Electronic Test Technician job is based in Mansfield and is commutable from surrounding areas including Sheffield, Nottingham, and Derby. Key Responsibilities and experience needed for the Electronic Test Technician job are as follows: Fault finding to component level Electronic testing Understanding of RF Test reports If you have any specific questions about this Electronic Test Technician job based in Mansfield, please call Ben Wiles on 01582 878816 or 07471181784. To apply email: bwiles@redlinegroup.Com ....Read more...

Electronic hand Production Technician

Electronic Production Technician to work on low volume, high value Electronic Systems manufacturing principally with hand tools including micro soldering, test, fault finding and repair of electrical and electronic systems and components. You will integrate and test electrical and electromechanical tools and take responsibility for the test equipment used to test tools. Experience and skills required Electronic lab equipment including: Multi-meter, Oscilloscope, Low Voltage Power Supplies, High Voltage Power Supply, measurement, test and debugging of electromechanical assemblies. Electrical or Electronic engineering qualification (e.g ONC, HNC, HND, NVQ Level 2) Proven ability to work successfully within design constraints. Electronic tools and general test equipment competence. Producing deliverable items from full drawing packs to relevant IPC standards. Role responsibilities Good electronic technician skills: testing, low and high voltage experience, basic soldering, crimping, and assembly. Fault finding and rectification at system and component level. ....Read more...

Electronic hand Production Technician

Electronic Production Technician to work on low volume, high value Electronic Systems manufacturing principally with hand tools including micro soldering, test, fault finding and repair of electrical and electronic systems and components. You will integrate and test electrical and electromechanical tools and take responsibility for the test equipment used to test tools. Experience and skills required Electronic lab equipment including: Multi-meter, Oscilloscope, Low Voltage Power Supplies, High Voltage Power Supply, measurement, test and debugging of electromechanical assemblies. Electrical or Electronic engineering qualification (e.g ONC, HNC, HND, NVQ Level 2) Proven ability to work successfully within design constraints. Electronic tools and general test equipment competence. Producing deliverable items from full drawing packs to relevant IPC standards. Role responsibilities Good electronic technician skills: testing, low and high voltage experience, basic soldering, crimping, and assembly. Fault finding and rectification at system and component level. ....Read more...

Electro mechanical Technician

As an Assembly Test Technician you will be responsible for executing assembly tasks, conducting tests, troubleshooting issues, and ensuring the smooth operation of the assembly and testing processes. Key Responsibilities Perform assembly tasks to build products or sub-assemblies using hand tools, power tools, and other equipment. Conduct functional tests, performance tests, and quality inspections on assembled products using specialized testing equipment and tools. Identify and troubleshoot technical issues that arise during assembly or testing processes. Use diagnostic tools and problem-solving techniques to determine the root cause of problems and implement appropriate corrective actions. Qualifications and Skills Proven experience as an assembly technician, test technician, or a similar role in a manufacturing environment. Understanding of quality control principles and practices. Ability to interpret technical documents, diagrams, and test procedures. Perform assembly, disassembly of complex electro-mechanical products ....Read more...

Electro mechanical Technician

As an Assembly Test Technician you will be responsible for executing assembly tasks, conducting tests, troubleshooting issues, and ensuring the smooth operation of the assembly and testing processes. Key Responsibilities Perform assembly tasks to build products or sub-assemblies using hand tools, power tools, and other equipment. Conduct functional tests, performance tests, and quality inspections on assembled products using specialized testing equipment and tools. Identify and troubleshoot technical issues that arise during assembly or testing processes. Use diagnostic tools and problem-solving techniques to determine the root cause of problems and implement appropriate corrective actions. Qualifications and Skills Proven experience as an assembly technician, test technician, or a similar role in a manufacturing environment. Understanding of quality control principles and practices. Ability to interpret technical documents, diagrams, and test procedures. Perform assembly, disassembly of complex electro-mechanical products ....Read more...

Electronic Manufacturing Technician

Electronic Manufacturing Technician required to test, fault find and repair various electrical or electronic systems and components of rotary steerable systems, Measurement While Drilling tools, Specialised Measurement tools and Rechargeable Batteries for Downhole use and power source products. You will work as part of engineering and quality driven manufacturing teams covering Mechanical manufacturing Technicians and supervisors integrating and testing electrical and electromechanical tools. You will also be responsible for maintaining and repairing the test equipment used to test tools. Experience Electronic technician experience of testing, low and high voltage experience, basic soldering, crimping, and assembly. Basic fault finding and rectification at system and component level. Further education in Electrical or Electronic engineering (ONC, HNC, HND, NVQ Level 2) Working within design constraints. Multi-meter, Oscilloscope, Low Voltage Power Supplies, High Voltage Power Supply (up to 400VDC) to make measurements on and for test and debugging of electromechanical assemblies Responsibilities Producing deliverable items from full drawing packs with minimal additional help to relevant IPC standards. ....Read more...

Electronic Manufacturing Technician

Electronic Manufacturing Technician required to test, fault find and repair various electrical or electronic systems and components of rotary steerable systems, Measurement While Drilling tools, Specialised Measurement tools and Rechargeable Batteries for Downhole use and power source products. You will work as part of engineering and quality driven manufacturing teams covering Mechanical manufacturing Technicians and supervisors integrating and testing electrical and electromechanical tools. You will also be responsible for maintaining and repairing the test equipment used to test tools. Experience Electronic technician experience of testing, low and high voltage experience, basic soldering, crimping, and assembly. Basic fault finding and rectification at system and component level. Further education in Electrical or Electronic engineering (ONC, HNC, HND, NVQ Level 2) Working within design constraints. Multi-meter, Oscilloscope, Low Voltage Power Supplies, High Voltage Power Supply (up to 400VDC) to make measurements on and for test and debugging of electromechanical assemblies Responsibilities Producing deliverable items from full drawing packs with minimal additional help to relevant IPC standards. ....Read more...

Mechanical Manufacturing Technician

A fantastic opportunity has arisen for a Mechanical Manufacturing Technician at a leading company. You will be working with the production team comprised of Electrical assemblers, Electrical manufacturing Technicians, and supervisors Key requirements Good competencies with electrical tools and general test equipment. Capable of producing deliverable items from full drawing packs with minimal additional help. Good mechanical technician skills. Experience with various hand tools and assembly tools (presses) Testing, low and high voltage assemblies, basic soldering, crimping, and mechanical lifting. Basic fault finding when necessary. Key skills Experience in mechanical assembly and pressure equipment. Experience in documentation, working with drawings. As part of the recruitment process a practical test will be performed. The test will involve building a standard sub-assembly. Experience in fault finding, repairing electromechanically systems ....Read more...

Mechanical Manufacturing Technician

A fantastic opportunity has arisen for a Mechanical Manufacturing Technician at a leading company. You will be working with the production team comprised of Electrical assemblers, Electrical manufacturing Technicians, and supervisors Key requirements Good competencies with electrical tools and general test equipment. Capable of producing deliverable items from full drawing packs with minimal additional help. Good mechanical technician skills. Experience with various hand tools and assembly tools (presses) Testing, low and high voltage assemblies, basic soldering, crimping, and mechanical lifting. Basic fault finding when necessary. Key skills Experience in mechanical assembly and pressure equipment. Experience in documentation, working with drawings. As part of the recruitment process a practical test will be performed. The test will involve building a standard sub-assembly. Experience in fault finding, repairing electromechanically systems ....Read more...

Hot Fire Test Technician, Aerospace Propulsion - Space

Space thruster Test Technician required to support Hot Fire Space Propulsion Testing programmes. The successful application will work with Test Engineers on site preparation, propellant handling, propellant sampling, pressure control systems checks, mechanical and steam vacuum systems, instrumentation calibrations, steam boiler operation also the collation and review of test data. There will be extensive work on high pressure gas and fluidic systems including interpretation and understanding of Piping and Instrumentation Diagrams and the use of electrical and electronic measurement and testing equipment. You will be working with satellite flight hardware, the preparation of space flight engines for test. Including instrumentation, installation on to the test stand, removal post hot fire test, and subsequent engine decontamination activities, etc. ....Read more...

Hot Fire Test Technician, Aerospace Propulsion - Space

Space thruster Test Technician required to support Hot Fire Space Propulsion Testing programmes. The successful application will work with Test Engineers on site preparation, propellant handling, propellant sampling, pressure control systems checks, mechanical and steam vacuum systems, instrumentation calibrations, steam boiler operation also the collation and review of test data. There will be extensive work on high pressure gas and fluidic systems including interpretation and understanding of Piping and Instrumentation Diagrams and the use of electrical and electronic measurement and testing equipment. You will be working with satellite flight hardware, the preparation of space flight engines for test. Including instrumentation, installation on to the test stand, removal post hot fire test, and subsequent engine decontamination activities, etc. ....Read more...

Mechanical Fitter Propulsion Test Technician

Mechanical Fitter required to work as a Space thruster Test Technician supporting Hot Fire Space Propulsion Testing programmes. The successful application will work with Test Engineers on site preparation, propellant handling, propellant sampling, pressure control systems checks, mechanical and steam vacuum systems, instrumentation calibrations, steam boiler operation also the collation and review of test data. There will be extensive work on high pressure gas and fluidic systems including interpretation and understanding of Piping and Instrumentation Diagrams and the use of electrical and electronic measurement and testing equipment. You will be working with satellite flight hardware, the preparation of space flight engines for test. Including instrumentation, installation on to the test stand, removal post hot fire test, and subsequent engine decontamination activities, etc. ....Read more...

Mechanical Fitter Propulsion Test Technician

Mechanical Fitter required to work as a Space thruster Test Technician supporting Hot Fire Space Propulsion Testing programmes. The successful application will work with Test Engineers on site preparation, propellant handling, propellant sampling, pressure control systems checks, mechanical and steam vacuum systems, instrumentation calibrations, steam boiler operation also the collation and review of test data. There will be extensive work on high pressure gas and fluidic systems including interpretation and understanding of Piping and Instrumentation Diagrams and the use of electrical and electronic measurement and testing equipment. You will be working with satellite flight hardware, the preparation of space flight engines for test. Including instrumentation, installation on to the test stand, removal post hot fire test, and subsequent engine decontamination activities, etc. ....Read more...

PCB Test Technician

An Electronic Manufacturing company is looking for a Test Technician to join their growing team. They are a growing company with production facility in the UK and global customer base. They supply products into wide range of vertical markets. Candidate requirements Knowledge and Experience in PCB and electronics assembly. Experience in Testing of PCB operations and assembly. Experience in documentation of the test procedures and results. Ability to find component level faults and test them. ....Read more...

PCB Test Technician

An Electronic Manufacturing company is looking for a Test Technician to join their growing team. They are a growing company with production facility in the UK and global customer base. They supply products into wide range of vertical markets. Candidate requirements Knowledge and Experience in PCB and electronics assembly. Experience in Testing of PCB operations and assembly. Experience in documentation of the test procedures and results. Ability to find component level faults and test them. ....Read more...

Electronics Test Technician

My client is looking for an Electronics Test Technician to join their production team. The company has production facility based in the UK with global customers. The company offers services from Electronic Product design through to full turnkey solutions. Candidate requirements Knowledge and experience working with PCB and other electronic devices. Experience with PCB assembly, operations, testing. Experience in documentation of PCB test procedures and results. Ability to find component level faults and test them. Attention to detail. ....Read more...

Electronics Test Technician

My client is looking for an Electronics Test Technician to join their production team. The company has production facility based in the UK with global customers. The company offers services from Electronic Product design through to full turnkey solutions. Candidate requirements Knowledge and experience working with PCB and other electronic devices. Experience with PCB assembly, operations, testing. Experience in documentation of PCB test procedures and results. Ability to find component level faults and test them. Attention to detail. ....Read more...

Mechanical Test Technician

Test technician with good all round precision engineering mechanical test validation and verification experience required to join a comprehensive in house test facility. Component, product, mechanical testing, assembly and disassembly experience ideally with test equipment maintenance, calibration, environmental screening, modification, troubleshooting and repair skills will be put to great use in this role. Previous experience in a mechanical apprenticeship, ONC or HNC in engineering, NVQ or CandG level 3 in mechanical engineering is required ideally with: Mechanical fitting skills practical ability with hand and power tools. Mobile hydraulics. Pneumatics: Pressure systems: Pressure equipment e.g. Accumulators and pulsation dampener. Pressure safety equipment, e.g. Pressure Relief Valves. Fluid Power systems Pumps, Piping, Valves. Plant maintenance activities, installation, fault finding and repairs of equipment and services. ....Read more...

Assembly/Manufacturing Technician

Test technician with good all round precision engineering mechanical test validation and verification experience required to join a comprehensive in house test facility. Component, product, mechanical testing, assembly and disassembly experience ideally with test equipment maintenance, calibration, environmental screening, modification, troubleshooting and repair skills will be put to great use in this role. Previous experience in a mechanical apprenticeship, ONC or HNC in engineering, NVQ or C&G level 3 in mechanical engineering is required ideally with. Proficient in the use of measurement equipment such as micrometres, megohmmeter, gauges etc . Advantageous to have industry experience with tools ideally in Well Intervention You???ll be responsible for assembly, fault finding, and repair of various mechanical and electromechanical systems and components ....Read more...

Mechanical Test Technician

Test technician with good all round precision engineering mechanical test validation and verification experience required to join a comprehensive in house test facility. Component, product, mechanical testing, assembly and disassembly experience ideally with test equipment maintenance, calibration, environmental screening, modification, troubleshooting and repair skills will be put to great use in this role. Previous experience in a mechanical apprenticeship, ONC or HNC in engineering, NVQ or CandG level 3 in mechanical engineering is required ideally with: Mechanical fitting skills practical ability with hand and power tools. Mobile hydraulics. Pneumatics: Pressure systems: Pressure equipment e.g. Accumulators and pulsation dampener. Pressure safety equipment, e.g. Pressure Relief Valves. Fluid Power systems Pumps, Piping, Valves. Plant maintenance activities, installation, fault finding and repairs of equipment and services. ....Read more...

Assembly/Manufacturing Technician

Test technician with good all round precision engineering mechanical test validation and verification experience required to join a comprehensive in house test facility. Component, product, mechanical testing, assembly and disassembly experience ideally with test equipment maintenance, calibration, environmental screening, modification, troubleshooting and repair skills will be put to great use in this role. Previous experience in a mechanical apprenticeship, ONC or HNC in engineering, NVQ or C&G level 3 in mechanical engineering is required ideally with. Proficient in the use of measurement equipment such as micrometres, megohmmeter, gauges etc . Advantageous to have industry experience with tools ideally in Well Intervention You???ll be responsible for assembly, fault finding, and repair of various mechanical and electromechanical systems and components ....Read more...

CAD Technician

An technology company, is looking to recruit a Production Technician to assist in the assembly, testing, repair of hardware and fault diagnosis. Responsibilities will include Testing small batches of the company???s products Diagnosis products Fault find to component level Repair hardware Simulate data from moving vehicles Main skills Experience with electro-mechanical assembly, test or service in a production environment Ability to carry out both surface mount and through hole soldering Attention to detail to accurately follow documented assembly and test procedures Knowledge of GPS, CAN-bus, inertial and video based equipment, GNSS device testing ....Read more...

CAD Technician

An technology company, is looking to recruit a Production Technician to assist in the assembly, testing, repair of hardware and fault diagnosis. Responsibilities will include Testing small batches of the company???s products Diagnosis products Fault find to component level Repair hardware Simulate data from moving vehicles Main skills Experience with electro-mechanical assembly, test or service in a production environment Ability to carry out both surface mount and through hole soldering Attention to detail to accurately follow documented assembly and test procedures Knowledge of GPS, CAN-bus, inertial and video based equipment, GNSS device testing ....Read more...

Electron Beam EB Welding Production Technician

Cleanroom Production Technician required to join a precision aerospace production team to work in a cleanroom environment on the assembly, integration and testing of aerospace devices. Our international Aerospace and Defence client is going through a continued period of expansion and looking for Precision Mechanical Assembly Technicians. The ideal candidate will have experience as a Mechanical fitter experience ideally through apprenticeship with exposure to and of the following: non return valves, flow control valves, solenoid valves, cold gas thrusters or any fluidic components for the space industry. Training and skills development will be provided, extended working hours may be required to meet production targets. Responsibilities Precision assembly and test activities in a Class 8 clean room. Testing the integrity of assembled systems using high pressure gases and leak detection equipment such as helium mass spectrometers. Cleaning components in preparation for assembly and test activities using automatic particle counting equipment and patch sample counting techniques. Electrical testing Gas flow testing of valves, thrusters and fluidic components to ensure components are within tolerance prior to assembly. Digital voltmeters, oscilloscopes, data acquisition systems, high voltage dielectric and insulation resistance test equipment. Material joining processes including manual TIG (Tungsten Inert Gas) welding, orbital welding, and compiling weld inspection reports on parts and test pieces. ....Read more...