Are you looking for a Electronic Test Engineer job?
If so, then I have the perfect opportunity to join a world leader in protection equipment, who are seeking a Electronic Test Engineer to join them at their Hertfordshire site.
Requirements for the Electronic Test Engineer Job in Hertfordshire:
Familiar with instrumentation systems, the use of signal generators, oscilloscopes, etc.
Experience of liaison with engineering in solving technical issues.
Established experience of testing instrumentation equipment, including electronic testing and fault finding.
Minimum HNC required - HND preferred – in a relevant subject.
Good team player and communicator, flexible approach to multiple tasks, taking responsibility for own actions.
Responsibilities for the Electronic Test Engineer Job in Hertfordshire:
Required to support qualification activities for this system at test houses in the UK.
Will involve environmental, vibration and EMC testing where the test engineer will validate performance of the system following a specific qualification test.
Opportunity to grow this role to supporting other installations in the UK through preventative maintenance activities.
The role may require some travel, but all expenses are paid for.
APPLY NOW for the Electronic Test Engineer job in Hertfordshire by sending your CV to RWilcocks@redlinegroup.Com or contact Ricky Wilcocks at 01582 878810 / 079317 888 34 for more information....Read more...
Are you an Embedded Test Engineer – Python looking for a new role based in Nottinghamshire?
My based client design and manufacture a range of complex electronic products that are used all over the world. They currently require a permanent Embedded Test Engineer – Python, Nottinghamshire to join their Product Development team.
Responsibilities will include:
Develop and execute test plans for embedded systems.
Design, implement, and maintain test environments for ARM M-Cortex or similar processors.
Set up and configure embedded web servers for testing purposes.
Collaborate with the development team to identify and resolve issues.
Document test procedures, results, and any defects or performance issues.
Contribute to continuous improvement initiatives to enhance testing efficiency and effectiveness.
Ensure compliance with industry standards and internal quality protocols.
The Embedded Test Engineer – Python, Nottinghamshire, will have experience of testing throughout the full product life cycle and a proven background in delivering test automation solutions in Python. You will have experience of writing test statements against applicable specifications, running them as manual tests and automating them. You will also be comfortable testing embedded target hardware through interfaces, such as USB, RS232 and IP.
The ideal candidate will have:
Experience of specifying tests.
Experience with automated testing frameworks and tools.
Proficient in test automation in Python.
Strong understanding of embedded systems and software development.
APPLY NOW for the Embedded Test Engineer – Python, Nottinghamshire, job by sending your CV to Brett on Blongden@RedlineGroup.Com.
Alternatively call me on 01582 878841 / 07961 158773.....Read more...
Are you looking for an exciting new Electronic Test Engineer job in Rochester, Kent? Then I have the perfect job opportunity for you!
My client are a world leading independent manufacturer of fire control panels. They are looking for a Electronic Test Engineer who will be verifying development designs to meet European standards and market requirements. You will also be maintaining records of results and report writing, so experience with Office/Excel is essential. Some travel may also be required with the use of the company vehicle.
The successful candidate will be working alongside the existing multidiscipline R&D team but should also be comfortable working alone.
Requirements for the Electronic Test Engineer Job:
Ability to read circuit diagrams with a background in electronic components
Knowledge of European standard EN54
Experience in electronic test
Proficient in National Instruments products, such as Labview
This is a great opportunity for an Electronic Test Engineer to join a well-established company who offer great benefits as well as the option for occasional hybrid working.
If you are interested in the Electronic Test Engineer job based in Rochester, Kent, please send an updated version of your CV to rwilcocks@redlinegroup.Com or call Ricky Wilcocks on 01582 87 8810 or 07931 788834.....Read more...
An exciting opportunity has arisen for a Test Development Engineer to join this global leader specialising in high-tech electronic technologies based in Portsmouth, Hampshire.
Due to continued growth they are seeking a Test Development Engineer to join their diverse engineering teams and be responsible for analysing customer requirements to develop Analogue, Digital and Mixed Signal Test Platforms, including hardware and software design.
Key skills experience for Test Development Engineer:
Degree qualified in Electronics Engineering or related discipline
Experience of developing Test solutions for Analogue and Mixed Signal components
Experience with Pascal, C++, C~, Visual basic hands-on programming
Credence D0, ASLx or COHU experience ideal
PCB Design – Altium, OrCad, EAGLE CAD
This is a unique chance to join a forward thinking company in the exciting technology market who can offer the opportunity of career progression and personal development.
To apply for Test Development Engineer, based in Portsmouth, please send your CV and covering letter to rwilcocks@redlinegroup,com, or for more information contact Ricky Wilcocks on 01582878810 or 07931788834. REF: RSP1154....Read more...
An exciting opportunity has arisen for a Test Development Engineer – C++ / C# to join this global leader specialising in high-tech electronic technologies based in Portsmouth, Hampshire.
Due to continued growth they are seeking a Test Development Engineer – C++/C# to join their diverse engineering teams and be responsible for analysing customer requirements to develop Analogue, Digital and Mixed Signal Test Platforms, including hardware and software design.
Key skills experience for Test Development Engineer – C++/C#:
Degree qualified in Electronics Engineering or related discipline
Experience of developing Test solutions for Analogue and Mixed Signal components
Experience with Pascal, C++, C~, Visual basic hands-on programming
Credence D0, ASLx or COHU experience ideal
PCB Design – Altium, OrCad, EAGLE CAD
This is a unique chance to join a forward thinking company in the exciting technology market who can offer the opportunity of career progression and personal development.
To apply for Test Development Engineer – C++ / C#, based in Portsmouth, please send your CV and covering letter to rwilcocks@redlinegroup,com, or for more information contact Ricky Wilcocks on 01582878810 or 07931788834. REF: RSP1154....Read more...
Are you a skilled Electronic Test & Inspection Engineer looking for a new exciting opportunity based in Sheffield?
My client, based in Sheffield, have an excellent new opening for an experienced Electronic Test & Inspection Engineer, to come and join their brand new facilities, within their quality department.
This new opening presents an opportunity to join a safety critical company, working on products that are lifesaving. Main duties for this role will include the inspection and verification of product quality, ensuring it meets the required customer specifications and reducing quality issues.
Key responsibilities for the Electronic Test & Inspection Engineer include:
Inspecting production and confirming specifications by conducting visual and certain test requirements.
Participate in projects to help reduce quality issues and problems internally/externally.
Assist in continual improvement projects, and work on further developments in this area.
Testing defective products and report writing, using test equipment such as multimeters.
Work with manufacturing to find solutions to difficulties in manufacturing new products and implement appropriate measurement/quality control steps.
Assist in investigating and resolving complaints and issues of the company products.
Support in developing and maintaining our internal test procedures.
Fault finding to component level of complex embedded electronic products
This is a fantastic opportunity to join a dynamic company, who supply their products across the globe. Onsite work is required in their Sheffield based facilities. To apply for the Electronic Test & Inspection Engineer role please email a copy of your CV to Sophie SKhuttan@redlinegroup.Com. For more info please call Sophie on 01582 878817 or 07961158586.....Read more...
Are you a skilled Quality Test & Inspection Engineer looking for a new exciting opportunity based in Sheffield?
My client, based in Sheffield, have an excellent new opening for an experienced Quality Test & Inspection Engineer, to come and join their brand new facilities, within their quality department.
This new opening presents an opportunity to join a safety critical company, working on products that are lifesaving. Main duties for this role will include the inspection and verification of product quality, ensuring it meets the required customer specifications and reducing quality issues.
Key responsibilities for the Quality Test & Inspection Engineer include:
Inspecting production and confirming specifications by conducting visual and certain test requirements.
Participate in projects to help reduce quality issues and problems internally/externally.
Assist in continual improvement projects, and work on further developments in this area.
Testing defective products and report writing, using test equipment such as multimeters.
Work with manufacturing to find solutions to difficulties in manufacturing new products and implement appropriate measurement/quality control steps.
Assist in investigating and resolving complaints and issues of the company products.
Support in developing and maintaining our internal test procedures.
Fault finding to component level of complex embedded electronic products
This is a fantastic opportunity to join a dynamic company, who supply their products across the globe. Onsite work is required in their Sheffield based facilities. To apply for the Quality Test & Inspection Engineer role please email a copy of your CV to Sophie SKhuttan@redlinegroup.Com. For more info please call Sophie on 01582 878817 or 07961158586.....Read more...
Software Test Engineer required to build and test software that is developed internally for Microsoft Windows desktop applications.
Skills
Test Automation programming and scripting for software build and test.
Software Engineering Lifecycle knowledge, test and integration particularly.
Testing software for PCs running Windows.
Writing test plans, specifications and reports.
Software installer experience, ideally build and development.
Degree in Software Development, Computer Science or equivalent.
Role
Software test and build.....Read more...
Embedded Software Engineer with bare metal programming required to write low level code for embedded systems in C and C++.
The Senior Embedded Software Engineer will develop firmware and software for new and existing products as part of a project team contributing to design discussions and activities. This is a Hybrid role with one day a week working from the office.
???Requirements
Bare metal Embedded C Development experience.
Electronics degree or other relevant subject.
Real time embedded programming and debugging skills.
Keil uVision for ARM or Realtime OS e.g. FreeRTOS exposure would be an advantage.
Responsibilities
Design, Develop and test firmware for new and existing products.
Develop test software and procedures, e.g. test automation.
Evaluate new technologies and products.
Take part in design architecture and code reviews.....Read more...
Embedded Software Engineer with bare metal programming required to write low level code for embedded systems in C and C++.
The Senior Embedded Software Engineer will develop firmware and software for new and existing products as part of a project team contributing to design discussions and activities. This is a Hybrid role with one day a week working from the office.
???Requirements
Bare metal Embedded C Development experience.
Electronics degree or other relevant subject.
Real time embedded programming and debugging skills.
Keil uVision for ARM or Realtime OS e.g. FreeRTOS exposure would be an advantage.
Responsibilities
Design, Develop and test firmware for new and existing products.
Develop test software and procedures, e.g. test automation.
Evaluate new technologies and products.
Take part in design architecture and code reviews.....Read more...
System Test Engineer
OverviewWe are seeking a System Test Engineer to take ultimate responsibility for the verification and validation of Systems to confirm fitness for purpose. This hands-on role involves developing verification and validation strategies, plans, and specifications for the assigned systems and subsystems, as well as leading 3rd party qualification activities and delivering test solutions on time and in full.
Responsibilities- Develop verification and validation strategies, plans, and specifications- Lead 3rd party qualification activities- Deliver test solutions on time and in full- Develop product test specifications- Lead on the resolution of test failures- Identify required resources and facilities to deliver test programmes- Maintain the test documentation set- Provide support to customers and resellers- Engage with customers to provide support for product performance issues- Answer technical questions and provide technical training- Support sales and commercial team with evidence for tenders and sales opportunities
Qualifications- Degree in engineering, mathematics, data science, or other science area- Basic programming ability- Experience working with requirements to define and deliver effective testing- Excellent communicator with proven problem-solving skills- Ability to multi-task and willingness to travel on occasion- Permission to work in the UK
Day-to-day- Develop verification and validation strategies, plans, and specifications- Lead 3rd party qualification activities- Deliver test solutions on time and in full- Engage with customers to provide support for product performance issues- Answer technical questions and provide technical training- Support sales and commercial team with evidence for tenders and sales opportunities
Benefits- Competitive salary- Opportunities for professional development- Dynamic and innovative work environment- Comprehensive benefits package
....Read more...
Embedded Software Engineer with bare metal programming required to write low level code for embedded systems in C and C++.
The Senior Embedded Software Engineer will develop firmware and software for new and existing products as part of a project team contributing to design discussions and activities. This is a Hybrid role with one day a week working from the office.
???Requirements
2 or 3 years Embedded C and C++ Design and Development experience.
Electronics degree or other relevant subject.
Real time embedded programming and debugging skills.
Diagnostic tool and measurement equipment knowledge.
Keil uVision for ARM or Realtime OS e.g. FreeRTOS exposure would be an advantage.
Responsibilities
Design, Develop and test firmware for new and existing products.
Develop test software and procedures, e.g. test automation.
Evaluate new technologies and products.
Take part in design architecture and code reviews.....Read more...
Embedded Software Engineer with bare metal programming required to write low level code for embedded systems in C and C++.
The Senior Embedded Software Engineer will develop firmware and software for new and existing products as part of a project team contributing to design discussions and activities. This is a Hybrid role with one day a week working from the office.
???Requirements
2 or 3 years Embedded C and C++ Design and Development experience.
Electronics degree or other relevant subject.
Real time embedded programming and debugging skills.
Diagnostic tool and measurement equipment knowledge.
Keil uVision for ARM or Realtime OS e.g. FreeRTOS exposure would be an advantage.
Responsibilities
Design, Develop and test firmware for new and existing products.
Develop test software and procedures, e.g. test automation.
Evaluate new technologies and products.
Take part in design architecture and code reviews.....Read more...
One of the UK’s leading companies, specialising within the Audio Technology industry are looking for an experienced Embedded Software Engineer - C to join their state-of-the-art facility in Surrey. This office is where my client gets involved with developing their next generation products and are investing very heavily in R&D.
As the Embedded Software Engineer – C, you will be working with the product specialists and other members of the R&D team to specify, design, develop, test and support embedded software for sophisticated high-end digital audio mixing products.
Other responsibilities of the Surrey based Embedded Software Engineer – C job include:
- Taking ownership of the design and development of new subsystems and functionality and developing the code, working with other members of the team to manage integration, collaborate on problem solving and provide mutual peer-review.
- Testing your own code, including devising test strategies and creating test harnesses where required, before handing over to the product testing team for formal acceptance testing.
- Working with product specialists to define requirements and specifications for new sub-systems and functionality.
In order to be a successful applicant for the Embedded Software Engineer – C job, you must:
- Be Proficient in C programming on embedded devices
- Have experience in developing on ARM-based microcontrollers
- Have some experience in reading and understanding a circuit diagram
- Able to take requirements through to high-quality code and supporting documentation through a systematic process of design, coding and test
- Experience in using audio mixing systems or pro audio would be advantageous but not essential
This is a fantastic job opportunity for an Embedded Software Engineer - C to join one of the biggest audio technology companies, offering great career prospects and training. They are very committed to developing their staff and up skilling them into the latest technologies. They also offer hybrid working options.
If you are interested in the Embedded Software Engineer - C job based in Surrey, please send an updated version of your CV to BWiles@Redlinegroup.Com or call Ben Wiles on 01582 878816 / 07471181784 for further information, otherwise we always welcome the opportunity to discuss other engineering jobs.....Read more...
Are you a Systems Engineer - Electronics looking for a new role based in Bedford?
My client are leaders in their field with a significant global presence and specialise in electronic enclosures and systems for critical industries, Aerospace and Defence, who are seeking a Systems Engineer - Electronics based in Bedford to join their team.
Key responsibilities for the Systems Engineer - Electronics based in Bedford:
Design of high-reliability, rugged systems for demanding aerospace and commercial applications.
Electrical / Electronic design including backplanes, power supplies and interface controls.
Liaising with customers to ensure compliant product design within timescales and on budget.
Generation of schematics, manufacturing data, bills of materials and specifications.
Generation of test and compliance documentation (test instructions, compliance matrices and verification documentation)
Maintaining and recording project data to ensure accurate records of design decisions, selections and changes during the design process.
Experience of the following would be an advantage for the Systems Engineer - Electronics based in Bedford
Awareness of military standards (DEF STD and MIL STD) for equipment
Knowledge of EMC and / or environmental test methods and procedures
Knowledge of UKCA / CE, RoHS and WEEE directives (EN60950 / EN62368)
Experience of working with CAD Software
APPLY NOW for the Systems Engineer - Electronics based in Bedford by sending your CV to SKhuttan@redlinegroup.Com or call on 01582 878817/ 07961 158586 quoting SKK1128. We always welcome the opportunity to discuss other engineering jobs.....Read more...
Junior Assembly Technician
Acton
£28,000 - £30,000 Basic + Great Working Environment + Stability + Early finishes + Holidays + Pension + Graduates Welcome! Are you looking for a junior assembly technician role with a company focused on being a great place to work in a clean environment? If so, you will benefit from working in a team environment while increasing your knowledge working on bespoke specialist products. Be appreciated for your work whilst working with like minded individuals. The company specialises in the design, manufacturing and supply of bespoke electromagnetic components and products. Due to continued increase in demand, they are looking to bring in an additional junior assembly technician to join their growing team. Feel valued through hard work and gain recognition when doing a great job. Your Role As A Junior Assembly Technician: * Mechanical Assembly. * Carry out testing and assembly on scientific equipment * Hard/Soft Welding. The Successful Junior Assembly Technician Will Have: * Experience in a similar role. * Experience with mechanical / electrical / electronic engineering * Welding experience desirable. * Live commutable to Acton, London Please apply or contact Joe Pavett for immediate consideration.
Keywords: Test Engineer, testing, engineer, mechanical, electrical, electronic, mechanical test engineer, electrical test engineer, electronic test engineer, Acton, London, West London, Mechanical Assembly Technician, Mechanical Assembly, Junior Technician, Junior Assembly.
This vacancy is being advertised by Future Engineering Recruitment Ltd. The services of Future Engineering Recruitment Ltd are that of an Employment Agency. Please visit our website at futureengineer.co.uk to view other positions we are currently handling. Future Engineering Recruitment Ltd can only accept applications from candidates who have a valid legal permit or right to work in the United Kingdom. Potential candidates who do not have this right or permit, or are pending an application to obtain this right or permit should not apply as your details will not be processed. We will endeavour to respond to all applicants however due to the sheer volume of response, we can only guarantee that candidates who have been shortlisted will be contacted.....Read more...
Electronic and Mechanical Senior or Principal Test Engineer required to design, build and develop a range of automated test processes for optical sensors including their test, calibration and characterisation.
Key Skills
Optical sensing
Optoelectronics or fibre optics
Strong degree or PhD in a relevant field such as Physics, Optics, Engineering etc.
Significant experience in Optical test environment
Data acquisition and processing using National Instruments Labview Product and compliance testing
Project Management or Line Management would also be ideal
Role responsibilities
Product testing from component level to product from prototype through the manufacturing process and final product test.
Data analysis, interpretation and presentation of recommendations.
Design and development of pressure, temperature and acoustic test processes for optical systems.....Read more...
Electronic and Mechanical Senior or Principal Test Engineer required to design, build and develop a range of automated test processes for optical sensors including their test, calibration and characterisation.
Key Skills
Optical sensing
Optoelectronics or fibre optics
Strong degree or PhD in a relevant field such as Physics, Optics, Engineering etc.
Significant experience in Optical test environment
Data acquisition and processing using National Instruments Labview Product and compliance testing
Project Management or Line Management would also be ideal
Role responsibilities
Product testing from component level to product from prototype through the manufacturing process and final product test.
Data analysis, interpretation and presentation of recommendations.
Design and development of pressure, temperature and acoustic test processes for optical systems.....Read more...
Test Automation Engineer required to work on GNSS Product Verification and Test as part of an Engineering team focusing on test verification and automation of GNSS PTN, Positioning, Timing and Navigation end to end systems.
The ideal candidate will have navigation and positioning test systems automation experience however training can be provided.
Skills
Labview
Matlab
Python
Unix and Windows OS.
Product Verification and Test including digital communications, RF analysis, Forward Error Coding for GNSS and related technology.
Test Automation using engineering test equipment.
Test equipment, spectrum analysers, oscilloscopes, RF power meters etc.
BA, BEng or HND Engineering subject.
Exposure to BPSK, QPSK or other phase modulation, spread spectrum, signal detection, signal and interference analysis, baseband filtering, data formatting, Pytest, Git or Git Hub would be beneficial.
Role
Setup and perform complex test procedures for GNSS PTN Positioning, Timing and Navigation solutions.
Test automation scripting.
Troubleshoot and solve technical issues to complex real world problems.....Read more...
Test Automation Engineer required to work on GNSS Product Verification and Test as part of an Engineering team focusing on test verification and automation of GNSS PTN, Positioning, Timing and Navigation end to end systems.
The ideal candidate will have navigation and positioning test systems automation experience however training can be provided.
Skills
Labview
Matlab
Python
Unix and Windows OS.
Product Verification and Test including digital communications, RF analysis, Forward Error Coding for GNSS and related technology.
Test Automation using engineering test equipment.
Test equipment, spectrum analysers, oscilloscopes, RF power meters etc.
BA, BEng or HND Engineering subject.
Exposure to BPSK, QPSK or other phase modulation, spread spectrum, signal detection, signal and interference analysis, baseband filtering, data formatting, Pytest, Git or Git Hub would be beneficial.
Role
Setup and perform complex test procedures for GNSS PTN Positioning, Timing and Navigation solutions.
Test automation scripting.
Troubleshoot and solve technical issues to complex real world problems.....Read more...
Leading company of electrical equipment are seeking a highly skilled Calibration Engineer to join their dedicated team. As a Calibration Engineer will ensure the accuracy and reliability of electrical and electronic instruments through meticulous calibration procedures. You will work closely with service team to provide comprehensive repair and calibration services, both in our environmentally-controlled laboratory and on-site at client locations.
Responsibilities
Perform calibration and testing of AC and DC power equipment, metering test equipment, and general purpose test and measurement instruments.
Conduct on-site visits for equipment repairs and calibration as part of our field service capability.
Maintain accurate records of calibration activities and ensure traceability to national standards.
Requirements
Bachelor's degree in Electrical Engineering, Electronics, or related field.
Proven experience in calibration, preferably in a UKAS-accredited laboratory environment.
Strong knowledge of AC power and energy measurements, with proficiency in calibration techniques.
Familiarity with electrical test equipment and standards, including power sources and electronic instruments.....Read more...
Leading company of electrical equipment are seeking a highly skilled Calibration Engineer to join their dedicated team. As a Calibration Engineer will ensure the accuracy and reliability of electrical and electronic instruments through meticulous calibration procedures. You will work closely with service team to provide comprehensive repair and calibration services, both in our environmentally-controlled laboratory and on-site at client locations.
Responsibilities
Perform calibration and testing of AC and DC power equipment, metering test equipment, and general purpose test and measurement instruments.
Conduct on-site visits for equipment repairs and calibration as part of our field service capability.
Maintain accurate records of calibration activities and ensure traceability to national standards.
Requirements
Bachelor's degree in Electrical Engineering, Electronics, or related field.
Proven experience in calibration, preferably in a UKAS-accredited laboratory environment.
Strong knowledge of AC power and energy measurements, with proficiency in calibration techniques.
Familiarity with electrical test equipment and standards, including power sources and electronic instruments.....Read more...
Vehicle and vehicle systems performance testing Applications Engineer required for Motorsport, Automotive, ADAS and related automotive test and evaluation.
This is a client facing role working from project requirements, scope, consultation, client site or in house test track setup, test execution usually test drive, troubleshooting equipment, data analysis, data interpretation, presentation and often certification.
The ideal candidate will have experience of vehicle instrumentation fitting and test measurement, excellent communication skills and be comfortable working with raw test data.
Skills
Motorsport or Automotive performance testing.
Full clean UK driving license.
Exposure to GPS, GNSS and automotive instrumentation technologies.
Testing methodologies, tools, and best practice experience.
Software testing techniques of manual and automated testing.
Hardware testing tools, such as oscilloscopes, logic analysers and multimeters.
Programming knowledge C++, Python or SQL.....Read more...
Trainee Field Engineer
Structural Column Testing
Depot based in Derby DE24 8EB
UK-Wide Field-based role involving weekly overnight stays
Starting salary up to £28,000 per annum
Extensive Training Opportunities, Holiday, Pension
Do you have experience operating plant machinery or groundwork and are keen to develop your skills further in a niche industry? If the answer is yes then please read on
Precision is excited to partner with a market leader in structural light testing as they grow their team in the Derby area. With a full order book and plans for continued success and growth, this is a fantastic opportunity for the right individual. They are currently seeking a Trainee Field Engineer, who is enthusiastic to learn structural testing. The depot is easily accessible from Derby, Castle Donington and surrounding areas.
The Role: Trainee Test Engineer
- To carry out Structural Testing and Analysis of Lighting Columns throughout the UK for local councils, highways and the rail network.
- Undertaking the structural testing of lampposts using machinery and test equipment (training will be provided)
- Expensed overnight stays (Monday to Thursday) with an early return Friday on a weekly basis.
- Working in small teams (typically 2)
- Cleaning, checking and loading test equipment and vehicles
- Early starts and driving to the test location on a Monday morning
- Setting up and liaising with contractors and clients on-site
- Working in a safe manner based on the location (H&S training will be provided)
- Operating machinery (Digger/cherry picker type arms)
- Reporting and record keeping
- Ensuring the security of machinery, vehicles and test equipment
- Occasional nights/weekend work is required.
Minimum Skills / Experience Required - Trainee Field Engineer:
- MUST hold a full, clean UK driving licence (class B+E desirable)
- Have previous experience of operating machinery such as a cherry picker, digger, JCB, scissor lift or forklift
- Prior experience in groundwork, highway maintenance, construction labouring, civil engineering or structural mechanics
- MUST be happy to stay away from home Monday-Thursday night on a weekly basis
- Be good at planning, reliable & well-organised
- Happy to be working outside in all weather conditions
- Live within 30 minutes of the Derby area
- Be PC literate able to use a computer to create simple reports
- Be willing to start early when the role requires
- Have a strong work ethic and commitment
The Package/Benefits - Trainee Field Engineer::
- Starting salary £26,000-£28,000 per annum
- Daily expenses are provided along with hotels for overnight stays
- Monday-Friday day shifts
- Competitive night shift bonus (OTE £35k with bonuses)
- Internal bonus progression within the first year
- Company pension scheme
- 23 days holidays + bank holidays
- Internal courses
Interested? To apply for this Trainee Field Engineer position, here are your two options:
- "This is the job for me! When can I start?" - Call now and lets talk through your experience. Ask for Emma Gilmore on 0116 4786971 between 7.30am - 4.30pm.
- "I think I'm right for this position, but I'm not sure I have enough to get an interview" - Click "apply now" so I can read your CV and let you know - emmag@precisionrecruitment.co.uk
PPDEL....Read more...
Calibration Engineer required with power metrology experience of DC and Low Frequency (LF) measurement equipment, (multimeters, resistors, power supplies, electrical test laboratory equipment).
The successful candidate must be happy to travel to work at customer sites.
Calibrator duties will be to:
Verify the performance of the instrument under test.
Adjust the response of the instrument under test.
Provide correction factors for the instrument under test.
Low Frequency (LF) calibration experience is highly desirable.
Our client provides electrical equipment service and calibration of power and energy devices including electric meter testing and associated equipment in electricity supply.....Read more...
