We are looking for a Senior RF Engineer to lead the design, development, and testing of RF, microwave, and antenna systems used in advanced electronic products.
Key responsibilities
Lead RF and antenna design projects (including modules and sub-contracted work)
Design and optimise microwave PCB layouts and RF systems
Perform RF component selection and system-level analysis
Support antenna design, modelling, testing, and validation
Troubleshoot RF production issues and perform root cause analysis
Work closely with manufacturing, supply chain, quality, and customers
Ensure engineering standards, documentation, and procedures are followed
Key Skills
RF PCB design at microwave frequencies
Strong knowledge of RF components (amplifiers, filters, mixers, PLLs)
RF system design (cascade analysis)
Experience with RF test equipment (VNA, spectrum analysers)
Antenna design knowledge (including array and printed antennas)
Altium and RF simulation tools
Radar or communications background
MATLAB and Python for test automation ....Read more...
Mechanical Design Engineer with subsea connector experience required to design and develop solutions with CAD and FEA tools high pressure underwater applications.
Requirements
Subsea or offshore mechanical system design experience.
CAD software and FEA tool fluency.
Subsea production systems, umbilical???s, jumpers, electrical and fibre connector knowledge.
Pressure testing, connector design.
Understanding of sealing technologies, pressure rated designs, and mechanical electrical interface design.
BEng or MEng in mechanical engineering or related degree subject.
Responsibilities
Design and develop Low and High Voltage subsea electrical and optical connectors, pressure housings, and sealing systems.
Perform FEA mechanical, thermal, and pressure simulations for HPHT high pressure and temperature for deep sea environments.
Prototype testing, pressure testing, and standard qualification.
Detailed documentation Design Specifications, Qualification Test procedures, 3D models, 2D drawings, BOMs, and Test Reports.
Design reviews and PEER reviews.
RCAs, FMEA, dFMEA, pFEMA at development and design cycles.
Cross-functional Collaboration.
Technical 2D drawings....Read more...
Mechanical Design Engineer with subsea connector experience required to design and develop solutions with CAD and FEA tools high pressure underwater applications.
Requirements
Subsea or offshore mechanical system design experience.
CAD software and FEA tool fluency.
Subsea production systems, umbilical???s, jumpers, electrical and fibre connector knowledge.
Pressure testing, connector design.
Understanding of sealing technologies, pressure rated designs, and mechanical electrical interface design.
BEng or MEng in mechanical engineering or related degree subject.
Responsibilities
Design and develop Low and High Voltage subsea electrical and optical connectors, pressure housings, and sealing systems.
Perform FEA mechanical, thermal, and pressure simulations for HPHT high pressure and temperature for deep sea environments.
Prototype testing, pressure testing, and standard qualification.
Detailed documentation Design Specifications, Qualification Test procedures, 3D models, 2D drawings, BOMs, and Test Reports.
Design reviews and PEER reviews.
RCAs, FMEA, dFMEA, pFEMA at development and design cycles.
Cross-functional Collaboration.
Technical 2D drawings....Read more...
Redline has been retained by a leading instrumentation manufacturer who are looking for a Electronics Design Engineer to join their R&D team based in Surrey.
Due to significant growth, they are seeking an Electronics Design Engineer to be responsible for the design and development of analogue and digital circuit design across new and existing products, going into a variety of regulated industries. You will be involved with PCB design, prototyping, test and validation and software interface.
The nature of the industry and products will require someone who is a British Citizen.
Key skills and experience for Electronics Design Engineer, based in Surrey:
Proven experience within a hands on electronics design role
Mixed signal design within a regulated industry i.e. Defence, Aerospace, Medical, Automotive etc.
Experience in sensor design
Degree qualified in a related Electronics discipline
Firmware / embedded knowledge
Excellent verbal and written communication skills
This is an exciting opportunity to join a growing company who can offer the opportunity for career progression and personal development. ....Read more...
Electronic Production Engineer required to help manufacture test and repair to component level PCB boards that include RF, electromechanical faultfinding, rework as needed, and final assembly.
You will work across NPI, NPD, Production, manufacturing and assembly to refine, improve and rethink products and processes.
Requirements
Production engineering, manufacturing support or process engineering experience of PCB assemblies including motors, sensors, PCBs, actuators, wiring and power packs.....Read more...
Electronic Production Engineer required to help manufacture test and repair to component level PCB boards that include RF, electromechanical faultfinding, rework as needed, and final assembly.
You will work across NPI, NPD, Production, manufacturing and assembly to refine, improve and rethink products and processes.
Requirements
Production engineering, manufacturing support or process engineering experience of PCB assemblies including motors, sensors, PCBs, actuators, wiring and power packs.....Read more...
We are partnered with a global engineering business in Chelmsford, Essex, developing advanced electronic systems used across aerospace, medical, and industrial applications. As production demand continues to grow, they are looking for a Production Engineer to support manufacturing, improve processes, and help transition new designs into stable, repeatable production.
In this Production Engineer role, you will:
Support manufacturing and test activities, resolving technical issues on the line
Carry out fault finding and root cause analysis to improve product performance
Drive practical improvements to processes, cost, and manufacturability
Support new product introduction, making sure designs are ready for efficient, scalable build
The ideal Production Engineer will have:
Experience supporting manufacturing in an electromechanical or electronics environment
A hands-on approach to problem solving, with strong fault-finding skills
Understanding of manufacturing processes and design for manufacture principles
An engineering degree or equivalent industry experience
This is a strong opportunity to join a well-established engineering team based in Chelmsford, Essex, working on complex, high-reliability products, with the chance to influence how they are built and improved over time.
To apply for this Production Engineer role in Chelmsford, Essex, apply now! For more information, email Ricky at rwilcocks@redlinegroup.Com or call on 01582 878810.....Read more...
Quality Coordinator
Bridgwater
£50,000 - £65,000 + Travel Allowance + Bonus + Pension + Private Medical + Holidays+ Package + Immediate Start
This is an opportunity to join a leading international general contractor delivering one of theUK's largest and most technically advanced industrial construction projects. You will play akey role in supporting the project quality function, ensuring quality standards are maintainedfrom construction through to commissioning and handover.
This business has a strong pipeline of construction projects across the UK and Europe,creating genuine progression opportunities into Quality Management, wider projectleadership positions or future UK and European assignments upon completion. Thecompany operates across the data centre, pharmaceutical and wider industrial sectors.
As Quality Coordinator, you will support the delivery of a "Right First Time" culture, workingclosely with the Project Quality Manager, site teams, subcontractors and the client to ensurequality procedures, inspections and documentation are managed effectively throughout theproject lifecycle.
Your Role as Quality Coordinator Will Include:● Supporting the implementation and maintenance of the project Quality ManagementSystem.● Coordinating Inspection & Test Plans (ITPs), inspections and quality documentation.● Assisting with audits, NCRs, quality reporting and corrective actions.● Maintaining quality records and ensuring project documentation is up to date.● Supporting subcontractor quality compliance and handover documentation.
The Successful Quality Coordinator Will Have:● Previous experience as a Quality Coordinator, QA/QC Coordinator, Quality Engineeror similar within construction.● Knowledge of ISO 9001 quality management systems and quality assuranceprocesses.● Experience managing quality documentation, inspections and project records.● Strong organisational skills with excellent attention to detail.● Confident communication skills and the ability to work closely with site teams andsubcontractors.
Keywords: Quality Coordinator, QA Coordinator, QA/QC Coordinator, Quality Engineer,Construction Quality Coordinator, Site Quality Coordinator, Project Quality Coordinator,Quality Assurance Coordinator, QA/QC Engineer, ISO 9001, Construction QA, QualitySystems, Inspection & Test Plans, ITPs, Quality Compliance, Industrial Construction,Advanced Manufacturing, Data Centre, Pharmaceutical Construction, Main Contractor,General Contractor.....Read more...
An exciting opportunity has arisen for a Cheshire based Electronics Maintenance Engineer to join this leading provider of electronic design and assembly services.
Based at their site in Cheshire they are seeking an Electronics Maintenance Engineer to be responsible for maintaining a wide variety of high tech assembly equipment along with general infrastructure maintenance.
**This Cheshire based company operate a 4x day working week, Monday to Thursday 7am to 5pm.**
Key skills required for Electronics Maintenance Engineer:
Maintenance of surface mount and associated assembly machinery, including; Juki and Europlacer placement machines; Reflow Ovens, Solder Paste Printers and Automatic Optical Inspection.
Generation of clear and comprehensive maintenance records for traceability purposes.
Liaison with external Service Engineers to arrange site visits to conduct annual service and calibration of machinery.
Maintenance, and supervision of specialist contractors, for building services including heating, electrical, water, compressed air and nitrogen.
Management of test schedules and associated records to meet statutory requirements for specific equipment and infrastructure.
This is a great opportunity for someone to join a growing organisation.
APPLY NOW! Please send your CV to adighton@redlinegroup.Com, or for more information contact Adam on 01582 878821....Read more...
Senior QA Automation Engineer – FinTech Trading Platform – London / Hybrid
(Tech stack: C#, .NET Core, .NET 8/9/10, AI-Assisted Testing, Test Automation, Reqnroll, SpecFlow, NUnit, Azure DevOps, SQL Server, ASP.NET Core, REST APIs, CI/CD, BDD, Automation Frameworks, Investment Management, Wealth Management)
Our client is a market-leading FinTech organisation developing an award-winning front-to-back investment and wealth management platform used by financial institutions across the UK and Europe. As part of a major investment in engineering excellence and AI-driven software delivery, they are seeking an experienced Senior Automation Engineer to define the future of quality engineering across a highly scalable, cloud-based platform that processes mission-critical financial transactions every day.
This is a rare opportunity to combine deep technical expertise with genuine technical leadership. As the technical owner of the automation framework, you will design and evolve the automation architecture, build scalable testing solutions in C# and .NET 10, and drive the adoption of AI-assisted testing practices across the engineering function. Working closely with Software Engineers, Architects, DevOps and Product teams, you will embed automation throughout the software development lifecycle, ensuring rapid, reliable feedback through modern CI/CD pipelines whilst continuously improving release quality and engineering efficiency.
You will lead the development of sophisticated automation frameworks using Reqnroll (or SpecFlow), NUnit, Azure DevOps Release Pipelines and SQL Server, delivering comprehensive regression, smoke and API test coverage across a modern microservices estate built on ASP.NET Core. Alongside mentoring Automation Engineers and establishing engineering best practices, you will evaluate emerging AI technologies, prototype innovative automation approaches and champion an automation-first culture that supports faster, higher-quality software delivery.
Experience with BDD, REST APIs, distributed systems and shift-left testing will be highly beneficial.
Successful Senior QA Automation Engineer candidates will have proven experience building enterprise-scale automation frameworks, excellent C#/.NET development skills and a passion for using AI to transform software testing. Experience within FinTech, investment management, wealth management or other regulated financial services environments would be advantageous, although candidates with strong technical leadership experience from other enterprise software businesses are equally encouraged to apply. This is an opportunity to influence engineering strategy, mentor talented teams and work with some of the latest automation and AI technologies available.
Senior QA Automation Engineer positions come with the following benefits:
Annual performance bonus.
Hybrid working and flexible working hours.
Private healthcare.
Enhanced pension scheme.
Dedicated learning and certification budget.
Access to the latest AI development and automation tooling.
Modern hardware and home office allowance.
Clear progression into Principal Engineer or Engineering Management.
Regular company events and technology innovation days.
Location: London, UK / Hybrid Working
Salary: £50,000 - £65,000 + Bonus + Pension + Benefits
Hybrid Working: 3-days a week in the office.
Applicants must have the right to work in the UK.
To apply for this position, please send your CV to Noir.
NOIRUKTECHREC
NOIRUKREC....Read more...
Mechanical Engineer Surveyor – Lifting Equipment / CranesWigan | Home Based | £42,000–£45,000 Basic | Total Package circa £54,000Mechanical Engineer Surveyor required for a leading test, inspection and certification organisation covering Wigan. This role is perfect for engineers with hands-on experience maintaining, servicing, or inspecting cranes and lifting equipment who want to step up into a professional Engineer Surveyor position.Mechanical Engineer Surveyor – Role OverviewAs a Mechanical Engineer Surveyor specialising in Lifting Equipment, you will:
Inspect and certify lifting equipment and cranes, including Gantry Cranes, Crawler Cranes, Scissor Lifts, MEWPs, Excavators, and Forklift Trucks anything covered under LOLER & PUWER regsEnsure compliance with LOLER and PUWER regulationsManage your own patch, diary, and client relationshipsProvide technical advice and clear inspection reportsOperate within agreed inspection authorities and H&S standardsDeliver excellent customer service in a professional environment
This home-based surveyor role allows autonomy with support from a centralised diary management team and no mandatory overtime.Mechanical Engineer Surveyor – Package
£42,000–£45,000 basic salaryTotal package circa £54,000Company car or car allowance with fuel cardPrivate health careDouble matched pensionAnnual bonus33 days holiday (including statutory) with ability to buy/sell extra days40-hour flexible working weekOvertime opportunities available (not mandatory)Structured training programme with £55,000 investment in the first 12 months12–16 weeks modular classroom & practical trainingSupport with professional membership renewal feesCareer ladder with 8 progression options
Mechanical Engineer Surveyor – Requirements
Practical experience maintaining, inspecting, servicing, or repairing lifting equipment or cranesIdeally a Level 4 qualification (HNC or above) in Mechanical Engineering or related disciplineMinimum a Level 3 Mechanical qualification accepted with strong hands-on experienceUK Driving LicenceComfortable in customer-facing roles
Ideal Backgrounds
Mechanical Maintenance EngineerCrane Engineer / Lifting Equipment EngineerMEWP EngineerForklift / Plant EngineerEx-Forces Engineer (REME)Existing Engineer Surveyor
Mechanical Engineer Surveyor – Lifting Equipment / CranesWigan | Home Based | £42,000–£45,000 Basic | Total Package circa £54,000....Read more...
An exciting opportunity has arisen for an experienced Senior Command & Data Handling Engineer to join a growing spacecraft engineering team developing advanced satellite platforms for complex space missions.
This role offers the opportunity to work across the full spacecraft lifecycle, from early concept and architecture through detailed design, integration, verification, environmental testing and mission support. Working within a multidisciplinary engineering team, you will play a key role in shaping the spacecraft avionics architecture and ensuring robust command and data handling capabilities across the platform.
Key Responsibilities
- Lead the design, development and delivery of spacecraft Command & Data Handling (C&DH) subsystems.
- Define, review and maintain subsystem requirements, interface definitions and technical documentation.
- Develop verification strategies, test plans and acceptance criteria for subsystem and spacecraft-level validation.
- Define and manage onboard data handling, processing and communications budgets.
- Support Failure Mode, Effects and Criticality Analysis (FMECA) and Fault Detection, Isolation and Recovery (FDIR) activities.
- Collaborate with systems engineering and other subsystem teams to develop Concept of Operations (ConOps), Interface Control Documents (ICDs) and verification plans.
- Plan and execute subsystem and system-level verification activities, including electrical and environmental testing.
- Review electronic circuit and PCB designs to ensure suitability for spacecraft applications.
- Support supplier selection, technical trade studies and design reviews throughout the equipment procurement lifecycle.
- Define, implement and validate telemetry and telecommand interfaces between onboard systems and the ground segment.
- Contribute to spacecraft avionics architecture, including processor selection, data bus architecture, redundancy concepts and fault-tolerant design.
- Work closely with flight software engineers to define onboard software interfaces and data handling functionality.
- Support anomaly investigation, root-cause analysis and corrective actions during integration, test and mission operations.
Essential Skills & Experience
- Degree in Electrical Engineering, Electronic Engineering or a related engineering discipline.
- 5+ years' experience developing Command & Data Handling systems for spacecraft.
- Strong understanding of spacecraft avionics architectures and onboard data handling systems.
- Experience working with industry-standard spacecraft interfaces including CCSDS, SpaceWire, CAN, I²C and RS422.
- Experience developing and executing spacecraft subsystem verification and test programmes.
- Good systems engineering knowledge with experience managing requirements throughout the project lifecycle.
Desirable Experience
- Spacecraft integration, verification and environmental testing.
- Flight hardware handling within cleanroom environments.
- GNSS timing and synchronisation for spacecraft.
- Radiation tolerance analysis and radiation assurance for space electronics.
- Digital spacecraft electronics and avionics architectures.
What\'s on Offer
- Opportunity to work on cutting-edge spacecraft programmes.
- Hybrid working with flexible hours and optional 9/75 working pattern.
- Private healthcare and life assurance.
- Relocation support may be available.
- Modern engineering and laboratory facilities.
- Collaborative, multidisciplinary engineering environment with genuine technical ownership.
This is an excellent opportunity for an experienced spacecraft avionics engineer looking to take ownership of Command & Data Handling architecture while working on innovative space missions within a highly skilled engineering team.
TT....Read more...
The Mechanical Engineer is responsible for designing, implementing, testing and maintaining mechanical structures to support the companys products and services.
Requirements
Honours Degree in Mechanical Design or relevant Engineering discipline.
Technical writing and documentation skills.
Able to understand technical drawings, documents and product manufacture.
Responsibilities
To assist in mechanical engineering development activities in accordance with quality processes and procedures.
To support and enhance the mechanical aspects of existing products in accordance with equipment business requirements.
Produce drawings and documentation for projects required by the equipment business.
Build and test prototypes for new equipment.
To embody drawing changes as required by the business.....Read more...
Systems Engineer required ideally with Maritime Defence or Radio Naval Navigation industry experience to manage external customer driven product concept, design, development and delivery with cross functional internal teams including Software, Mechanical and Electrical disciplines.
Requirements
British Citizen eligible for UK Security clearance.
Defence engineering experience of systems and product lifecycles from concept design, integration and test.
Valid UK Driving License
Beneficial
Radar, Radio System, communications protocols systems and bid proposal knowledge.
Naval Platform, Navigation equipment electronics EMC, ESD skills.
This is a fantastic opportunity to join a cutting edge technical team working on very exciting detection and navigation military systems.....Read more...
Systems Engineer required ideally with Maritime Defence or Radio Naval Navigation industry experience to manage external customer driven product concept, design, development and delivery with cross functional internal teams including Software, Mechanical and Electrical disciplines.
Requirements
British Citizen eligible for UK Security clearance.
Defence engineering experience of systems and product lifecycles from concept design, integration and test.
Valid UK Driving License
Beneficial
Radar, Radio System, communications protocols systems and bid proposal knowledge.
Naval Platform, Navigation equipment electronics EMC, ESD skills.
This is a fantastic opportunity to join a cutting edge technical team working on very exciting detection and navigation military systems.....Read more...
We are looking for a Systems Engineer to support the design, integration, and delivery of complex engineering products within a highly technical environment.
Key Responsibilities
Systems design, integration, and testing
Support full product lifecycle (concept through to in-service support)
Work across multidisciplinary teams (software, mechanical, electrical)
Produce technical proposals, specifications, and reports
Mentor junior engineers where required
Deliver engineering work packages to time, cost, and quality
Requirements
Degree in Engineering, Mathematics, Physics, or equivalent experience
Experience in systems design, integration and test
Understanding of product and systems lifecycles
Strong communication skills and customer-facing capability....Read more...
The Mechanical Engineer is responsible for designing, implementing, testing and maintaining mechanical structures to support the companys products and services.
Requirements
Honours Degree in Mechanical Design or relevant Engineering discipline.
Technical writing and documentation skills.
Able to understand technical drawings, documents and product manufacture.
Responsibilities
To assist in mechanical engineering development activities in accordance with quality processes and procedures.
To support and enhance the mechanical aspects of existing products in accordance with equipment business requirements.
Produce drawings and documentation for projects required by the equipment business.
Build and test prototypes for new equipment.
To embody drawing changes as required by the business.....Read more...
Systems Engineer required ideally with Maritime Defence or Radio Naval Navigation industry experience to manage external customer driven product concept, design, development and delivery with cross functional internal teams including Software, Mechanical and Electrical disciplines.
Requirements
British Citizen eligible for UK Security clearance.
Defence engineering experience of systems and product lifecycles from concept design, integration and test.
Valid UK Driving License
Beneficial
Radar, Radio System, communications protocols systems and bid proposal knowledge.
Naval Platform, Navigation equipment electronics EMC, ESD skills.
This is a fantastic opportunity to join a cutting edge technical team working on very exciting detection and navigation military systems.....Read more...
Systems Engineer required ideally with Maritime Defence or Radio Naval Navigation industry experience to manage external customer driven product concept, design, development and delivery with cross functional internal teams including Software, Mechanical and Electrical disciplines.
Requirements
British Citizen eligible for UK Security clearance.
Defence engineering experience of systems and product lifecycles from concept design, integration and test.
Valid UK Driving License
Beneficial
Radar, Radio System, communications protocols systems and bid proposal knowledge.
Naval Platform, Navigation equipment electronics EMC, ESD skills.
This is a fantastic opportunity to join a cutting edge technical team working on very exciting detection and navigation military systems.....Read more...
We are looking for a Systems Engineer to support the design, integration, and delivery of complex engineering products within a highly technical environment.
Key Responsibilities
Systems design, integration, and testing
Support full product lifecycle (concept through to in-service support)
Work across multidisciplinary teams (software, mechanical, electrical)
Produce technical proposals, specifications, and reports
Mentor junior engineers where required
Deliver engineering work packages to time, cost, and quality
Requirements
Degree in Engineering, Mathematics, Physics, or equivalent experience
Experience in systems design, integration and test
Understanding of product and systems lifecycles
Strong communication skills and customer-facing capability....Read more...
The Redline Group have an exciting opportunity for a Principal Electrical Engineer, based on site in Loughborough. This is a fantastic opportunity to play a key role within the AC Product Development team, leading the design and delivery of wiring harnesses and electrical work packages for cutting-edge fuel cell products.
Main responsibilities for the Principal Electrical Engineer, based in Loughborough, are:
Leading the electrical design and delivery of wiring harnesses, cable assemblies and other electrical work packages for hydrogen fuel cell products
Producing high-quality electrical schematics, wiring harness designs and manufacturing documentation using SolidWorks Electrical
Working closely with multidisciplinary engineering teams to develop scalable, production-ready electrical solutions that meet applicable standards and certification requirements
Supporting the development of system test rigs and ensuring designs consider circuits, harnesses, bonding, earthing, EMC and DfX principles
Key skills required for the Principal Electrical Engineer, based in Loughborough, are:
BEng, BSc or equivalent qualification in Electrical Engineering or a related discipline
Industrial experience in electrical design for electro-mechanical products
Strong experience with SolidWorks Electrical, schematic capture, wiring harness design and manufacturing documentation
Experience designing to recognised standards, including circuits, harnesses, bonding, earthing and EMC requirements
Ability to lead work packages, communicate effectively across multidisciplinary teams and deliver projects on time with excellent attention to detail
This is an onsite role. My client can offer sponsorship for the right candidate as well as the potential for relocation assistance.
To apply for this Principal Electrical Engineer role, please email a copy of your CV to Kyle Graveney at KGraveney@redlinegroup.Com or call 01582 878817.....Read more...
A Senior Embedded Software Engineer is sought to join an innovative engineering team in Newark-on-Trent, Nottinghamshire, contributing to the design, development and validation of secure embedded software for network-connected assistive listening products.
The Senior Embedded Software Engineer, Newark-on-Trent, Nottinghamshire, will be expected to take a leading role in embedded software development, working across the full product lifecycle while collaborating with hardware, firmware, test and compliance teams.
Responsibilities include:
Designing and developing embedded software in C/C++ for real-time systems
Developing secure network-connected products using TCP/IP, HTTP/S and TLS
Writing, testing and maintaining production-quality embedded software
Supporting cybersecurity, compliance and secure product development
Working with RTOS and low-level device drivers for ARM-based platforms
Collaborating with multidisciplinary engineering teams to deliver new products
Supporting debugging, technical reviews and continuous product improvements
The Senior Embedded Software Engineer, Newark-on-Trent, Nottinghamshire, will have the following key skills:
Strong embedded C and/or C++ development experience
Experience with RTOS, bare-metal development and ARM Cortex processors
Knowledge of TCP/IP, HTTP/S, TLS and network-connected embedded systems
Experience with low-level interfaces including SPI, I2C, UART and DMA
Strong debugging, problem-solving and technical communication skills
APPLY NOW – Senior Embedded Software Engineer job in Newark-on-Trent, Nottinghamshire could be of interest, send your CV to adighton@redlinegroup.Com or call Adam Dighton on 01582 878821.....Read more...
Join our leading International Aerospace and Defence company. We are seeking a highly skilled Senior Systems Engineer to play a critical role in supporting our current engine development program. This is an exciting opportunity to contribute to the development of a complex, multifaceted rocket engine system composed of numerous components.
Key Responsibilities:
Manage the Design, Verification, and Compliance Matrix at a top level.
Oversee the overall engine system architecture, including:
System-level analysis (FMECAs, radiation, reliability, mechanical, thermal, fluidic, electromagnetic, etc.)
Documentation (Design, Design Justification Document, Software Requirements Specification, Engine Test Plan, etc.)
Collaborate with the Project Manager to plan and organise project tasks and resources.
Support the engine system build, assembly, and test development process by reviewing route cards, build sequences, and integration processes.
Key Requirements:
Master???s degree in engineering (Aerospace, Mechanical, or Electrical engineering preferred).
Minimum of 5 years of experience in complex product development within the industry.
Proven track record as a technical leader with clear communication skills, leading large multidisciplinary and multicultural engineering teams.
Understanding of Electrical or Harnessing Design, routing, and schematic.
Proficiency in System Thermal Equipment design and selection.
Knowledge of System Analysis, including but not limited to: Fluidic Analysis, Performance Analysis, Thermal Analysis, Radiation Assessment, Failure Modes Effects and Criticality Analysis (FMECA)....Read more...
Join our leading International Aerospace and Defence company. We are seeking a highly skilled Senior Systems Engineer to play a critical role in supporting our current engine development program. This is an exciting opportunity to contribute to the development of a complex, multifaceted rocket engine system composed of numerous components.
Key Responsibilities:
Manage the Design, Verification, and Compliance Matrix at a top level.
Oversee the overall engine system architecture, including:
System-level analysis (FMECAs, radiation, reliability, mechanical, thermal, fluidic, electromagnetic, etc.)
Documentation (Design, Design Justification Document, Software Requirements Specification, Engine Test Plan, etc.)
Collaborate with the Project Manager to plan and organise project tasks and resources.
Support the engine system build, assembly, and test development process by reviewing route cards, build sequences, and integration processes.
Key Requirements:
Master???s degree in engineering (Aerospace, Mechanical, or Electrical engineering preferred).
Minimum of 5 years of experience in complex product development within the industry.
Proven track record as a technical leader with clear communication skills, leading large multidisciplinary and multicultural engineering teams.
Understanding of Electrical or Harnessing Design, routing, and schematic.
Proficiency in System Thermal Equipment design and selection.
Knowledge of System Analysis, including but not limited to: Fluidic Analysis, Performance Analysis, Thermal Analysis, Radiation Assessment, Failure Modes Effects and Criticality Analysis (FMECA)....Read more...
JOB DESCRIPTION
Employer Description:
Legend Brands is a growing multi-vertical manufacturer serving restoration, cleaning, and construction professionals; performance automotive cooling markets; fish hatchery and aquaculture operations; through a portfolio of industry-leading brands including Dri-Eaz, Mediclean, UnSmoke, OdorX, Sapphire Scientific, Prochem, Chemspec, Flex-A-Lite, and Marisource.
Legend Brands is hiring for a Design Engineer at our Arlington, WA location. This opportunity is for a unique individual that has the engineering background, but also enjoys working with their hands. If you have the combined engineering talent and the mechanical skills, we encourage you to apply for this position. The Design Engineer is responsible for overseeing large Truck Mount project management, which involves initial investigation of viability, cost, initial design, product research and prelim testing.
Please apply directly on our careers page - https://hcwx.fa.us2.oraclecloud.com/hcmUI/CandidateExperience/en/sites/CX_2
Essential Duties
Follows product development process
Finalizes the initial concept to an Alpha Prototype design using all the same resources
Aids in refinement process of the initial prototype, incorporation into production, and customer acceptance
Manages Beta process for ground up designs or Preproduction process
Conducts all final testing with thorough documentation in drawings, manuals, and kit instructions
Manages full project documentation (Schedule/Logs/Test Data/Requirements/Statement of Work/Project Approval SS/ ETC) for each project
Designs CAD equipment based on project pillar requirements supplied by management and PDC for cfm required - (recovery), water pressure (psi) water volume (gpm)
Assists in final production implementation
Responds to Vendor and Customer interactions, as needed
Creates Engineering Change Orders. Provides Testing / Data Acquisition
Completes Proto Fabrication and Design. Assembles prototypes and test samples
Performs other related duties as assigned
Minimum Qualifications
Bachelor's degree in engineering or design required
Experience working with manufacturing and machines preferred
Must have proficiency computer skills, including Microsoft Office Suite, D365 (or equivalent MRP)
Must have proficiency in SolidWorks
Strong aptitude for creating detailed blueprints and instructions
Must be able to multitask, prioritize, and manage time efficiently
Accurate and precise attention to detail
Must have exceptional verbal and written communication skills and interact with customers via phone and in-person
Must be able to read, write, and speak English language and be understood
Must have good mechanical aptitude
Must be driven and goal oriented and willing to take on new challenges and see them through
Design Engineer
I
is intended for individuals with a minimum of 1-2 years related work experience. Requires knowledge and competent demonstration of the following within 6 months of hire:
Understanding in Legend Brands Design Process
MS Project
Design Engineer
II
is intended for individuals with a minimum of 5 years related work experience. Requires working knowledge and competent demonstration of the following:
Must have in-depth knowledge of engineering and design principles
Must understand CAD drawings, bill of materials (MRP), SolidWorks, and PDM Vault
Organize plans and create schedules using MS Project
Estimate and establish cost parameters and budgets for design
Hiring Range
$80.2K - $97K DOE
Benefits
Legend Brands offers an excellent benefits package with comprehensive medical, dental, vision, life insurance, disability coverage, 10 paid holidays, generous paid time off, employer matching 401 (k)PLUS a company-sponsored pension, and more!
Additional Considerations • Legend Brands is an equal opportunity employer that considers all applicants without regard to their race, color, religion, national origin, sex, sexual orientation, gender identity, protected veteran status or disability• Candidates must be authorized to work for an employer in the U.S., as we are not currently sponsoring or taking over sponsorship of employment Visa's
• All job offers are contingent upon satisfactory pre-employment drug test and background checksApply for this ad Online!....Read more...
