An apprentice would be learning how the Lynch factory operated and would work with other team members in a variety of disciplines.
Training under key members of staff to learn how wiring systems are used and how to use the tools necessary to complete tasks.
Use of wiring diagrams and utilising them.
Fault finding on systems and learning how to assemble and test control systems.
Working with the factory team with regards to cleaning and organising workspace and aspects of workplace safety.
Understanding development and design and manufacture of the Lynch permanent magnet DC Motor
Looking at applications and associated parts to develop solutions using the lynch Motors and associated products.
Training:The apprenticeship training is delivered through a combination of workplace learning and regular college attendance. This training will teach you the knowledge, skills and behaviours set out in the Level 3 Mechatronics Maintenance Technician standard. On completion the apprentice will receive the Pearson BTEC Level 3 Diploma in Advanced Manufacturing Engineering (Development Technical Knowledge) qualification. Functional Skills in Maths and English may also be required depending on current level. Training Outcome:The opportunity for a permanent position with Lynch Motors and progression within the company.Employer Description:Lynch Motors was established in 1990, we had a bold vision to develop and produce electric motors in quantity to the highest standards. In order to do this, each component had to be fully investigated, tested and put to the extremes to ensure that they would not only do what was expected, but would also surpass their requirements.
We are now widely regarded as an innovator and leader of electric motors. Our products have been perfected for over 25 years and far ahead of the other motors on the market at the time.Working Hours :Monday -Thursday- 7am-5pmSkills: Communication skills,IT skills,Attention to detail,Organisation skills,Customer care skills,Problem solving skills,Analytical skills,Logical,Team working,Initiative,Patience....Read more...
The Field Engineer will be responsible for the following duties:
Assisting in the installation, configuration, and maintenance of telecoms equipment (e.g., broadband, fibre, VoIP, and mobile systems)
Supporting fault diagnosis and repair on customer sites or remotely
Learning how to test and commission telecoms services to ensure quality and connectivity
Working outdoors and indoors in both residential and commercial environments
Following safety procedures and adhering to industry regulations
Using tools, testing equipment, and software to carry out technical tasks
Keeping accurate records and reports of completed work
Supporting senior engineers and learning from their expertise
Attending off-the-job training sessions with our apprenticeship training provider
Training:
Level 3 IT Support Technician Apprenticeship Standard
You will complete a 22-month apprenticeship which includes 25 days at the PETA training centre in Cosham
You will be supported every 6-8 weeks with visits from your PETA Learning & Development Coach
Training Outcome:
After the successful completion of the apprenticeship there will be an opportunity for the apprentice to stay in a permanent position as a field engineer
Employer Description:Founded in November 2022, Zappie is the fastest-growing telecommunications company in the UK. We provide businesses with everything they need for reliable and efficient communication. Behind every call, every message, and every connection, there’s a dedicated team of individuals who are the heartbeat of Zappie. Our team is a mix of industry veterans, tech whizzes, and customer service superstars. Together, we’re building something special.
At Zappie, we know that it’s the people who make the difference. It’s about more than just lightning-fast internet or crystal-clear calls. Real people are at the heart of everything we do.Working Hours :Monday - Friday, 08:00 - 17:00 (45 mins paid lunch break)Skills: Team working,A keen interest in telecoms,Interest in technology,Interest in engineering,Good problem solving skills,Hands-on practical approach,Able to follow instructions....Read more...
Key Responsibilities:
Assist in the setup and operation of CNC milling, turning machines
Learn to interpret technical drawings, CAD, and work orders
Measure and inspect finished products using precision instruments (e.g., calipers, micrometers)
Monitor machining operations and make basic adjustments as needed
Follow safety protocols and maintain a clean, organised work area
Shadow experienced machinists and participate in training sessions
Document work performed and maintained accurate records
Support continuous improvement initiatives in the machine shop
Attributes
Interest in mechanical work, manufacturing, or engineering
Strong math and problem-solving skills
Willingness to learn and take direction
Ability to work independently and as part of a team
Good hand-eye coordination and attention to detail
What We Offer:
Structured on-the-job training and mentorship
Opportunity to earn while you learn
Career path to becoming a certified CNC Machinist
Safe and supportive work environment
Training:
4 days per week on-the-job at Aluminium Special Products Limited
1 day per week off-the-job training at Sandwell College Engineering Centre, West Bromwich
Training Outcome:
Successful completion of the apprenticeship may lead to a full-time permanent position within the company, with opportunities for further development and progression
Employer Description:ASP is an independent expert in aluminium and magnesium alloys. The essence of this expertise is to assist customers in utilising the benefits of light metals by developing exact specifications, without compromise. We then serve that requirement 100% correct, on-time, every time.Working Hours :Monday - Thursday, 7.30am - 4.30pm.
Friday, 7.30am - 1.30pm.Skills: Communication skills,IT skills,Attention to detail,Organisation skills,Customer care skills,Problem solving skills,Presentation skills,Administrative skills,Number skills,Analytical skills,Logical,Team working,Creative,Initiative,Non judgemental,Patience,Physical fitness....Read more...
Providing general administrative support to the Service Coordinator, Operations Manager, and other team members.
Maintaining a proactive approach to office management, including responding to emails, calls, and inquiries.
Assisting with the preparation of reports, client communications, and any other ad-hoc administrative duties as needed.
Communicating with clients to address their needs and provide updates on service requests.
Supporting the Operation Manager and Technical Manager when required.
Contacting customers about alarm monitoring requests when required.
Effectively communicating with the sales team, operations team, service department and finance department.
Proactive day-to-day correspondence with clients, engineers and suppliers.
Keeping the CRM system and engineers' schedules up to date.
Minimum of 6 hours per week spent on apprenticeship work and training.
Training:Working towards your Business Admin Level 3 Qualification, you'll attend monthly 1-2-1 meetings (online via teams every month - NO classroom OR college!) with your tutor and learn about the modules. You will be given a minimum of 3 hours per week to complete any apprenticeship work (assignments, research, and projects) and will receive at least another 3 hours of training from your employer. All apprenticeship work and training is completed in the workplace, during working hours.Training Outcome:As with any apprenticeship opportunity - if you prove yourself to be a valuable member of the team there is a strong chance of a permanent post within the business.Employer Description:Century Fire & Security Ltd is an established, friendly, committed, family ran business that values their team and clients. Century specialise in the Service, Maintenance and installation of Fire, intruder alarms, CCTV, Access Control, Automatic gates and barriers solutions. Long Established since 2001 they pride themselves on their positive team culture, customer care and value for their extensive discipline range.Working Hours :Monday to Friday 8.30am to 5pm.Skills: Attention to detail,Communication skills,Customer care skills,Initiative,IT skills,Organisation skills,Team working....Read more...
What you’ll do:
Communicate with customers by phone and email, responding to enquiries and providing excellent service.
Manage the intercom system and greet customers at the trade counter.
Handle courier queries and delivery updates.
Process sales orders and quotes using our sales software (SAGE).
Provide after-sales support to ensure customers are satisfied.
Providing support to the management team with miscellaneous administrative tasks.
Training:The apprentice will work towards the Business Administrator Standard. This will be delivered through group training once a month at our centre in Newbury and 1-1 training and review meetings.
Maths and English Functional Skills will be delivered either remotely or in person if required.Training Outcome:Ongoing training and development are encouraged. This is a great starting point to build a technical sales career.Employer Description:About Beninca UK:
Beninca UK, a satellite branch of Automatismi Benincà SpA, was formed in February 2010. With a vast amount of experience of the gate automation industry, our knowledgeable and friendly staff are always here to help. Situated in Newbury, Berkshire we are well located to serve the whole of England, Scotland and Wales with the best before and after sales service in the industry. With the backing of Beninca Group PLC based in Northern Italy we have some of the most innovative and reliable gate automation and access control products there are to offer. Our strategy is simple, we offer quality, reliable products to industry professionals but what sets us apart from our competition is our focus on customer service. Our customers are the most important aspect of our business, we are dependent on you, you are not dependent on us. We keep things simple and have the flexibility to offer the personal touch to our before and after sales service.Working Hours :Monday to Friday between 8.30am/9.00am - 5.00pm.Skills: Communication skills,IT skills,Attention to detail,Organisation skills,Administrative skills,Professional,Methodical....Read more...
The Company:
A market leading manufacturer and distributor of medical products.
Seeing continual and exponential growth.
A fantastic career opportunity.
The Role of the Regional Clinical Trainer
Providing training and clinical support to nurses and other clinicians on an exciting new portfolio of IV access devices.
You will be liaising with theatre managers, sisters, nurses, neonatal departments, ITU/CCU/ICU, A&E
Working from home, visiting hospitals across the Midlands.
Responsible for influencing stakeholders and ensuring trials and training leads to positive customer experiences and outcomes.
Will be a lot of demo style short sessions in hospitals and some stand up, face to face sessions that the successful candidate will deliver.
Covering the Midlands and part of East Anglia (Ideally based central to patch - Birmingham, Leicester, Coventry, Northampton, Dudley)
Benefits of the Regional Clinical Trainer
£35k-£37k basic salary
£10k bonus
Car allowance £550 per month
Business mileage paid
Phone
Laptop
25 days holiday
Life assurance
Pension.
The Ideal Person for the Regional Clinical Trainer
Amazing opportunity for someone that wants to join a good company that rewards people.
Ideally looking for someone with a little commercial experience, maybe a year as a nurse advisor with some training experience – either training patients or other nurses.
Must have some exposure to IV/Vascular Access/Venepuncture.
Registered as a nurse, Active PIN.
Highly motivated person, the role is challenging, exciting and rewarding.
Big preference for commercial experience but not definitely essential.
Must be au fait with IT packages such as Excel, PowerPoint etc.
Must be happy driving, it’s a big region and there will be plenty of overnight stays.
If you think the role of Regional Clinical Trainer is for you, apply now!
Consultant: David Gray
Email: davidg@otrsales.co.uk
Tel no. 0208 397 4114
Candidates must be eligible to work and live in the UK.
About On Target
At On Target, we specialise in sales, technical and commercial jobs in the Engineering, Construction, Building Services, Medical & Scientific, and Commercial & Industrial Solutions sectors, enabling our consultants to become experts in their market sector. We place all levels of personnel, up to Director across the UK and internationally.....Read more...
The Company:
A market leading manufacturer and distributor of medical products.
Seeing continual and exponential growth.
A fantastic career opportunity.
The Role of the Regional Clinical Trainer
Providing training and clinical support to nurses and other clinicians on an exciting new portfolio of IV access devices.
You will be liaising with theatre managers, sisters, nurses, neonatal departments, ITU/CCU/ICU, A&E
Working from home, visiting hospitals across the North of England – ideally based in the North West around the Manchester area
Responsible for influencing stakeholders and ensuring trials and training leads to positive customer experiences and outcomes.
Will be a lot of demo style short sessions in hospitals and some stand up, face to face sessions that the successful candidate will deliver.
Benefits of the Regional Clinical Trainer
£35k-£37k basic salary
£10k bonus
Car allowance £550 per month
Business mileage paid
Phone
Laptop
25 days holiday
Life assurance
Pension.
The Ideal Person for the Regional Clinical Trainer
Amazing opportunity for someone that wants to join a good company that rewards people.
Ideally looking for someone with a little commercial experience, maybe a year as a nurse advisor with some training experience – either training patients or other nurses.
Must have some exposure to IV/Vascular Access/Venepuncture.
Registered as a nurse, Active PIN.
Highly motivated person, the role is challenging, exciting and rewarding.
Big preference for commercial experience but not definitely essential.
Must be au fait with IT packages such as Excel, PowerPoint etc.
Must be happy driving, it’s a big region and there will be plenty of overnight stays.
If you think the role of Regional Clinical Trainer is for you, apply now!
Consultant: David Gray
Email: davidg@otrsales.co.uk
Tel no. 0208 397 4114
Candidates must be eligible to work and live in the UK.
About On Target
At On Target, we specialise in sales, technical and commercial jobs in the Engineering, Construction, Building Services, Medical & Scientific, and Commercial & Industrial Solutions sectors, enabling our consultants to become experts in their market sector. We place all levels of personnel, up to Director across the UK and internationally.....Read more...
Answering and logging IT helpdesk calls
Resolving technical queries and helpdesk tickets
Reinstalling desktop operating systems
Diagnosing remote PC faults for business clients
Monitoring and maintaining server backups, antivirus updates, and system logs
Building and configuring PCs
Installing new PCs and integrating them into client networks
Conducting PC health checks and basic maintenance
Preparing reports on helpdesk activity and performance
Performing IT admin tasks such as password resets and user account setup
General administrative and office duties including greeting visitors and keeping the workspace tidy
Completing additional tasks as directed by management
Training:Advanced Level Apprenticeship in IT Digital Support Technician consisting of:
Level 3 Apprenticeship in IT Digital Support Technician
Level 2 Functional Skills in mathematics
Level 2 Functional Skills in English
You will be required to attend a half-day session at the training centre per week where you will work towards any functional skills that are required, alongside enhancing your IT knowledge and capabilities. Additional off the job training will also be required as part of the apprenticeship.Training Outcome:After the apprenticeship, there may be an opportunity for you to advance in the workplace or go on to higher education. Employer Description:Providing IT support in Hull, and the full Yorkshire region, Jupiter IT have been delivering their cyber-security-focused managed IT services to businesses since 2007. Established by three NHS IT consultants, Jupiter IT was built on the strong belief that local businesses deserved a better calibre of IT support and consultancy from an organisation that has their best interests at heart.Working Hours :Monday to Friday, 8:30am - 5:00pm.Skills: Communication skills,IT skills,Attention to detail,Organisation skills,Customer care skills,Problem solving skills,Analytical skills,Logical,Team working,Initiative....Read more...
Tasks covered during apprenticeship:
Interpretation of technical drawings
Fabrication of steel members
Checking size of section/length and pre-drilled holes against drawing
Ensuring all steel and relevant fittings are available and holes/plates are dressed correctly
Marking off sections for notching or the attachment as fittings as required
Flame cutting, grinding, tack welding and lifting operations
Ensuring best possible joints are used at all times
Mark weld sizes, load numbers, paint specifications to assist progression of fabrication at later stages
Ensure all paperwork is completed in accordance with ECS requirements
Assisting with welding where required
The use/storage of consumables/PPE
Identification of defects
Understanding and working to ECS Safe Systems of Works and procedures
Training and use of all associated equipment
Training:
An apprenticeship allows you to earn a wage, gain valuable work experience and industry specific competence
You will be expected to work towards the Metal Fabricator Level 3, with support from your employer and the Chesterfield College Group
As part of your apprenticeship, and dependent on your prior attainment, you may be required to complete maths and English Functional Skills which is an integral part of your apprenticeship
Upon successful completion you will be awarded additional certificates of recognition for these qualifications
Level 3 Diploma in Advanced Manufacturing Engineering
Training Outcome:
Full time job with the company
Continued training and development
Employer Description:ECS provide high quality, reliable and cost effective engineering solutions, specialising in bespoke design and construction of water, energy and environmental processing and management projects.Working Hours :Monday - Thursday, 7.25am - 3.55pm and Friday, 7.30am - 1.30pmSkills: Communication skills,Attention to detail,Organisation skills,Problem solving skills,Number skills,Analytical skills,Logical,Team working,Creative,Initiative,Physical fitness,Interest in Welding,Interest in Plating....Read more...
Duties to include:
Support the IT technical team with administrative tasks
Maintain the filing systems, manual and digital
To create and maintain spreadsheets for own and other staff use
To support effective team work and cover reception as required
To help meet all the designated KPIs
Liaising with internal departments to ensure an excellent level of service is provided
Scanning, filing, and archiving paperwork
Following company procedures
Recording, updating and archiving information
Use of office equipment (photocopier, fax machine etc.)
Training:
Business Administrator Level 3 Apprenticeship Standard
Level 2 English and maths Functional Skills (if applicable)
Training will take place at Protocol B3 2NH 1-day per month
Training on-site at employer
Training Outcome:
Progression route to a team leader
Employer Description:Here at EDIT Ltd (registered as Education & IT Ltd), we offer IT services that include IT support, cybersecurity, disaster recovery solutions, mailing and productivity solutions, and more.
Our bespoke software solutions have produced Entrée Visitor and Contractor Management, which is directing the company into the exciting area of being a Software Solutions Provider. Add-ons to Entrée include incident management for health and safety compliance and resource booking, allowing the end-user to assign hot desks, parking spaces, keys, etc. We see ourselves as solutions providers to problems using technology. We aim to make the lives of clients easier and more efficient to allow them to focus on the things that are important to them.
Our ambition is to grow the company with our existing products, the development of new products, and to chase tenders that solve unique problems.Working Hours :Monday - Friday - shifts (flexible).Skills: Communication skills,IT skills,Attention to detail,Organisation skills,Customer care skills,Problem solving skills,Presentation skills,Administrative skills,Logical,Initiative,Patience,Active listener,Good inter-personal skills,Sel-direct learning,Problem solving,Maintain focus....Read more...
Assisting with preventative maintenance - lubricating machines, checking belts, gears, motors, sensors, cleaning componements and replacing parts
Supporting Reactive Maintenance - observing breakdown investigations, handling tools or replacing basic parts, helping isolate electrical/mechanical faults (under supervision)
General Housekeeping - keeping the maintenance workshop clean and organised, cleaning machine areas after maintenance work
Tools and Equipment Management - learning correct use and care of hand tools, power tools and PPE, restocking maintenance consumables, supporting the facilities management technician to ensure the site and its grounds and maintained to a high and safe standard
Training:
Work-Based Training: Learn on-site at MEG Derby, a leading manufacturer in the drinks industry
Academic Study: 4 weeks per month delivered by Burton and South Derbyshire College at Toyota’s training academy
Technical Expertise: Gain insight from Toyota’s world-renowned approach to quality and continuous improvement
Qualifications: Work toward a Level 3 Engineering Technician (Mechatronics Maintenance Technician) Apprenticeship Standard.Mentorship & Support: Learn from experienced professionals in a real-world environment with ongoing coaching and development
Training Outcome:
The apprentice will have the opprtunity to gain their personal and professional skills
Further development in either Electrical or Mechanical pathways
Automation / PLC / Controls
Leadership development
Employer Description:MEG Derby is a state of the art beverage manufacturing plant, located in Foston, Derbyshire. We have been in operating since January 2024 and produce mineral water and non-alcoholic beverages for the Lidl UK. Employing approximately 110 employees and operating 24/6.Working Hours :Monday to Friday - 08.00 to 16:00 hours.Skills: Communication skills,IT skills,Attention to detail,Organisation skills,Customer care skills,Problem solving skills,Presentation skills,Administrative skills,Number skills,Analytical skills,Logical,Team working,Creative,Initiative,Non judgemental,Patience,Physical fitness....Read more...
Telemarketer
Belfast
€25’000- €28’000 + (OTE £50’000) + Progress into Senior + Technical Training + Company Trips + ‘Immediate Start’
Fantastic opportunity for a Telemarketer to join a true industry leader! Relish the chance to work for a company who will progress your career into senior positions and technically. You will receive specialist training to constantly improve to be recognised as an expert in this sector. Opportunities for progression through the company are on offer with the chance to earn in excess of £50'000 in your first year.
This company is an industry leader within the telecom sector and due to growth they require a Telemarketer to join their highly skilled team. Join a company that values their employees where you’ll get to progress technically and into senior positions while receiving training consistently. If you are looking to kick start your career in a sales position with a great team then apply now!
Your Role As A Telemarketer Will Include
* Proactive business development calling
* Updating company CRM
* Building new relationships for the companyThe Successful Telemarketer Will have:
* Passion to progress and develop
* Prior sales experience (retail, hospitality welcomed)
* Good communication and people skills
Keywords: Telemarketing, Sales Consultant, Cold Calling, B2B, B2C, Telecoms, Broadband, Fibre, Retail, Hospitality, Marketing, People Skills, Sales Executive, Recruitment Consultant, Business Development, Sales, Marketing, Internal Sales, Belfast, Antrim, Northern Ireland....Read more...
Junior Sales Consultant
Belfast
€25’000- €28’000 + (OTE £50’000) + Progress into Senior + Technical Training + Company Trips + ‘Immediate Start’
Fantastic opportunity for a junior sales consultant to join a true industry leader! Relish the chance to work for a company who will progress your career into senior positions and technically. You will receive specialist training to constantly improve to be recognised as an expert in this sector. Opportunities for progression through the company are on offer with the chance to earn in excess of £50'000 in your first year.
This company is an industry leader within the telecom sector and due to growth they require a junior sales consultant to join their highly skilled team. Join a company that values their employees where you’ll get to progress technically and into senior positions while receiving training consistently. If you are looking to kick start your career in a sales position with a great team then apply now!
Your Role As A Junior Sales Consultant Will Include
* Proactive business development calling
* Updating company CRM
* Building new relationships for the company
The Successful Junior Sales Consultant Will have:
* Passion to progress and develop
* Prior sales experience (retail, hospitality welcomed)
* Good communication and people skills
Keywords: Telemarketing, Junior Sales Consultant, Cold Calling, B2B, B2C, Telecoms, Broadband, Fibre, Retail, Hospitality, Marketing, People Skills, Sales Executive, Recruitment Consultant, Business Development, Sales, Marketing, Internal Sales, Belfast, Antrim, Northern Ireland
....Read more...
Field Service Engineer
Stafford
£36’500 - £40’000 ( OTE £40’000) + Commission + Holidays + internal Training + External Training + ‘immediate Start’ + Company Van + Fuel Card + Pension
Have a passion for mechanical work? If so, this is a great chance to step Into a Field Service Engineer role within the calibration department. Work a varied role with a industry leader known for the quality of service covering a local patch.
My client offers calibration services to a variety of customers across the UK and due to growth they require a Field Service Engineer to join this tight knit team where you will be looked after and treated how employees should be
Your Role As A Field Service Engineer Will Include
* Calibration On A Variety Of Equipment
* Consistent Technical Training On Specific Company Equipment
* Progression Into Field / Senior Positions
As A Field Service Engineer You Will Have:
* Mechanical Bias
* Field Service Engineering Experience / Workshop Engineer
* Clean Driving License
Keywords: Workshop Engineer, Calibration Engineer, Mechanical Engineer, Ex forces, Navy Engineer, Field Service Engineer, Mobile Engineer, Field Engineer, Garage Equipment, Hydraulics, Calibration Engineer, Technician, Engineer, Stafford, Stoke on trent.
Future Engineering Recruitment Ltd are that of an Employment Agency.
Please visit our website to view other positions we are currently handling.
Future Engineering Recruitment Ltd can only accept applications from candidates who have a valid legal permit or right to work in the United Kingdom. Potential candidates who do not have this right or permit, or are pending an application to obtain this right or permit should not apply as your details will not be processed.
We will endeavour to respond to all applicants however due to the sheer volume of response, we can only guarantee that candidates who have been shortlisted will be contacted.
--....Read more...
Assist in the fitting, assembly, and machining of components to precise specifications.
Learn and operate manual lathes and milling machines.
Work with engineers and technicians to understand technical drawings and specifications.
Maintain a clean, safe, and organised work environment.
Ensure quality control standards are adhered to and meet all engineering specifications.
Attend training sessions and learn new skills related to engineering and machining.
Carry out preventative maintenance on our machines, especially with reference to older models.
Contribute to project tasks and support senior engineers in their work.
Training:Apprentices will attend the Leek Campus on a weekly basis. They will also be visited in the workplace regularly by their college instructor-mentor, who will complete observations, professional discussions and ensure the apprentice makes good progress with their studies. Training Outcome:There is excellent potential for permanent employment on the successful completion of your apprenticeship. Alongside a chance to work on exciting, varied projects within a leading company. Employer Description:RoBAT Ltd is a subsidiary of Mycronic, a global technology leader with a market valuation of approximately £3 billion. Based at our headquarters in Macclesfield, Cheshire, we have a small multi-disciplined, dynamic team designing and manufacturing high-value robotic machines for testing PCBs (printed circuit boards).
Most of our sales are to China and the USA, where we operate our own small factories and employ local teams to provide high-quality customer support. RoBAT is firmly established as the leading company in this very specialised and niche marketplace. This is a unique opportunity to be part of a company at the forefront of industrial automation.Working Hours :Monday to Friday 8.30am to 5pm with time off to complete college work/attend college as required.Skills: Communication skills,Attention to detail,Organisation skills,Problem solving skills,Logical,Team working,Strong attention to detail,Ability to follow instruction,Willingness to learn,A passion for precision work....Read more...
This is a fantastic opportunity for an enthusiastic and hard-working candidate with a genuine interest in business to work and train as an apprentice in a fast-paced office environment.
As a business apprentice, you will carry out a wide range of administrative duties whilst supporting members of a busy team. This is an excellent opportunity to learn and progress in a varied and interesting role within a well-established company.
On and off-the-job training and professional development will be completed in the workplace, and delivered by Nelson and Colne College Group.
You will spend time across each area of the business providing administrative support and gaining experience of different departments, including working with the sales department, office, accounts, and production teams to accurately prepare and process all sales and office administration.
Duties include:
Ensure all sales administration, production and order forms are accurate
Dealing with customer enquiries via telephone and email
Proactively updating customer orders
Providing technical support to customers queries (following training)
Preparing and updating sales quotations
Providing administrative support to other departments
Delivering high levels of customer service at all times
Contacting customers via telephone or email
Training Outcome:Potential for a permanent position within the business and career development on successful completion of the apprenticeship for the right candidate.Employer Description:Established in 1987, Beta Group has grown to become one of the country’s leading air filtration and engineering service specialists. We operate with 3 divisions - Air Filtration, Spraybooth Services, Building Services. Beta Group Ltd are growing rapidly and we are looking for an enthusiastic outgoing person to join our team to offer support to various departments.Working Hours :Monday - Friday, 40 Hours per week, times to be confirmed.Skills: Communication skills,IT skills,Attention to detail,Organisation skills,Team working,Initiative....Read more...
Assist in the assembly of signage using various materials and components
Learn and apply basic electrical componentry, including the application of LEDs
Use hand tools and workshop machinery such as table saws and wall saws
Read and follow technical drawings under supervision
Work safely and efficiently within a production team
Maintain a clean and organised work area in line with 5S principles
Continuously develop lean manufacturing knowledge and skills through formal training and on-the-job experience.
Previous experience in sign manufacture is highly desirable
Familiarity with assembling signage or similar production work
Confidence in using a variety of hand and power tools
Basic understanding of drawings and measurements
Transferable skills from trades such as joinery or other assembly-based roles will be considered.
Training:
A fully work-based programme working towards a Level 2 Lean Manufacturing Operative standard
Training Outcome:
Potential full-time position upon completion of the apprenticeship.
Employer Description:Astley has amassed a wealth of expertise in creating branded environments, supporting clients such as Sainsbury's, The Co-operative, JET and Hilton Hotels with a variety of essential signage solutions. From multi-location rollout programmes across the UK and Europe, to highly bespoke single site installations, Astley has built up a reputation of providing the very best consultancy and expert client support in the industry. In 2016, Astley acquired the award-winning signage company Sign of the Times, an ideal brand to team up with as they offered a unique creative production service that complimented the current portfolio of services. Rebranded to Astley in June 2020, the Kettering site now joins the other 3 Astley sites in the UK, offering full national coverage to support a variety of sectors including retail, leisure, hospitality, finance, automotive, and creative.Working Hours :Monday - Friday, 8.30am - 5.00pmSkills: Attention to detail,Communication skills,Logical,Organisation skills,Physical fitness,Problem solving skills,Team working....Read more...
Assist in updating internal project and client trackers
Open new enquiries, save electronic documents and correspondence
Upload and download technical drawings from various portals
Maintain and update project milestones and deadlines in the ERP system as directed
Support the team with general administrative tasks as required
Log planning applications with the relevant local authorities
Update client trackers with application submission and determination dates
Process electronic payments for planning applications and save receipts accordingly
File and manage planning-related correspondence in client records
Training:
You will be studying a Level 3 Business Administrator apprenticeship standard over an 18-month period
This is a fully work-based programme- You will get allocated time to complete your apprenticeship work and also receive regular meetings with your training provider
Training Outcome:
Potential full-time position upon completion of the apprenticeship
Employer Description:Astley has amassed a wealth of expertise in creating branded environments, supporting clients such as Sainsbury's, The Co-operative, JET and Hilton Hotels with a variety of essential signage solutions. From multi-location rollout programmes across the UK and Europe, to highly bespoke single site installations, Astley has built up a reputation of providing the very best consultancy and expert client support in the industry. In 2016, Astley acquired the award-winning signage company Sign of the Times, an ideal brand to team up with as they offered a unique creative production service that complimented the current portfolio of services. Rebranded to Astley in June 2020, the Kettering site now joins the other 3 Astley sites in the UK, offering full national coverage to support a variety of sectors including retail, leisure, hospitality, finance, automotive, and creative.Working Hours :Monday- Friday
8.30am- 5.00pmSkills: Administrative skills,Attention to detail,Communication skills,IT skills,Number skills,Organisation skills,Problem solving skills,Team working....Read more...
Assist with workplace risk assessments and safety inspections
Support incident investigation and reporting processes
Help maintain HSE documentation and compliance records
Participate in safety training delivery and awareness programs
Monitor adherence to health and safety policies
Assist with environmental monitoring and sustainability initiatives
Support emergency response planning and fire drills
Conduct workplace safety audits under supervision
Collaborate with IT teams on technology-related safety protocols
Training Outcome:
Progression to HSE Advisor/Coordinator role
Opportunity for permanent employment
Further training towards Level 5 Diploma in Occupational Health and Safety
Potential specialization in technology sector HSE
Career pathway to HSE Manager or Specialist roles
Professional membership opportunities (IOSH, NEBOSH)
Employer Description:LifeSafety.ai, part of PODTECH, is a leading provider of integrated safety solutions—combining intelligent software with on-the-ground physical services to help organisations manage risk, ensure compliance, and protect their people.
With a team of over 30 skilled developers, QA engineers, and technology consultants, we deliver custom software that powers everything from mission-critical safety systems to scalable, cloud-based HSE platforms. Our deep technical expertise spans both modern and legacy technologies, enabling us to offer end-to-end development tailored to complex operational needs.
Beyond software, we offer a growing range of physical services—including safety inspections, compliance audits, and workplace risk assessments—delivered by trusted partners and HSE professionals.
As we grow the LifeSafety.ai offering within the Health, Safety & Environmental (HSE) sector, our mission remains clear: to create safer, more efficient workplaces through intelligent technology and hands-on, real-world services.
We also invest in the future—supporting apprentices and new talent as they build meaningful careers in HSE and technology within a fast-paced, mission-driven environment.Working Hours :Monday to Friday, 9:00 AM - 5:30 PM.Skills: Communication skills,IT skills,Organisation skills,Team working,Initiative....Read more...
Supporting our team of engineers in maintaining, troubleshooting and supporting industrial computer systems
Refurbishing and testing industrial control system parts and modules
Assisting with system upgrades and software installations on control equipment
Preparing and documenting maintenance reports carried out on equipment and systems
Helping to diagnose faults using specialist test rigs and diagnostic tools
Processing part orders and updating internal records
Supporting our team on a day-to-day basis in the running of the business
Attending customer sites alongside experienced engineers (some travel required)
Participating in technical training sessions and shadowing senior team members
Keeping the workshop organised and maintaining tools and equipment
Assisting with stock control, booking in parts and managing inventory systems
Training:
Full Maintenance & Operations Engineering Technician Apprenticeship at Level 3
4 days working with employer, 1 day at college, our Luckyn Lane Campus in Basildon
Training Outcome:
Full-time employment with the company on satisfactory completion of the apprenticeship
Employer Description:We are a specialist provider of Parts and Service solutions for ABB Bailey DCS installations in Europe, the Middle East and Asia.
Our goal is to provide tailored solutions offering the best value with a high quality of service, helping our customers to maintain and develop their ABB Bailey DCS operations.
We take great pride in the service we provide to our customers, and our specialist resource is built on a solid foundation of skills, developed over 25 years of practical experience in the industrial automation industry specifically supporting the ABB Bailey DCS system.Working Hours :Monday to Friday, 9.00am - 5.00pmSkills: Communication skills,IT skills,Attention to detail,Organisation skills,Problem solving skills,Analytical skills,Logical,Team working,Creative,Initiative,Non judgemental,Patience,Willingness to learn,Adaptable,Positivity....Read more...
Assist with fabrication tasks including cutting, bending, drilling, and welding of metal components
Read and interpret technical drawings to help assemble metal structures or products
Operate basic workshop machinery and tools under supervision
Prepare and finish metal surfaces, e.g., deburring, grinding, or cleaning materials for welding
Follow health and safety procedures at all times, using correct PPE and observing site safety rules
Work alongside qualified fabricators to learn best practices and develop practical skills
Support quality checks by measuring and inspecting components to ensure they meet specifications
Maintain a clean and organised workspace, including cleaning tools and equipment
Attend team briefings or toolbox talks as required
Complete apprenticeship tasks and portfolio evidence as part of your on-the-job learning
Training:
Level 2 Lean Manufacturing Operative - Welding Apprenticeship Standard
Attend college one day per week as part of your formal apprenticeship training. Complete coursework, assessments, and exams to gain your relevant qualification (e.g., Level 2 or 3 Diploma in Fabrication and Welding)
Apply theory learned at college to your work in the workshop
https://www.instituteforapprenticeships.org/apprenticeship-standards/st0420-v1-2Training Outcome:
Progression to Full Time employment
Employer Description:Gel Engineering is a dynamic and innovative engineering organisation, providing safe and sustainable, value-led solutions in a timely manner. Our GEL ‘family’ consists of proud, passionate and highly skilled people, who through great working relationships with our clients and supply chain, provide forward thinking engineering ‘magic’, whilst ensuring every project is delivered in a professional, ‘no-nonsense’, practical way. We continually strive to surpass expectations by attracting and retaining qualified, experienced people, whose focus is on engineering excellence and who always listen and are keen to learn.Working Hours :Monday - Friday, 7.30am - 4.30pmSkills: Attention to detail,Communiciation skills,Initiative,Logical,Non judgemental,Organisation skills,Patience,Problem solving skills,Team working....Read more...
Day to day tasks include:
Program + Operate CNC Milling machines
Program + Operate CNC Lathe
Assist with the preparation, setup, and maintenance of manufacturing equipment and tooling
Operate manual lathes
Operate manual pillar drills
Learn programming languages – G-code & Heidenheim
3D CAD + CAM using Solidworks
Opportunity to learn how to program + operate lasers
Maintain + Repair CNC machines
Maintain Tools
Assist with the preparation, setup, and maintenance of manufacturing equipment and tooling
Support process improvement projects to enhance productivity and quality
Create and update technical documentation, work instructions, and maintenance records
Collect and analyse production data to support root cause analysis and problem-solving
Work closely with engineers to trial and implement new manufacturing processes and technologies
Participate in design for manufacturing (DfM) reviews and provide feedback to design teams
Maintain a clean and safe working environment in accordance with Health & Safety regulations
Attend college/training provider sessions and complete coursework and assessments
Training:This is a Level 3 Engineering and Manufacturing Support apprenticeship, delivered over a 36 month period.
The apprentice will attend the training centre, In-Comm Training Services in Telford, TF3 3AJ, 2 and a half days per week for the first 14 months.Training Outcome:Upon successful completion of the apprenticeship, the apprentice will be offered a full time position with career progression and potentially further training.Employer Description:For over 50 years, Webster-Wilkinson have designed, manufactured and supplied a comprehensive range of Transformer Components to the Transmission & Distribution marketplace – both in the UK and overseas.
From our wholly-owned manufacturing plants in Telford, England; Webster-Wilkinson continues to provide products and services to Transformer Manufacturers, Distribution Network Operator (DNO) Companies, Local and State Energy Utilities and all those who need high grade transformer components or high-voltage solutions.Working Hours :Monday - Thursday, 8.00am - 4:30pm.
Friday, 8.00am - 1.00pm.Skills: Communication skills,IT skills,Attention to detail,Organisation skills,Problem solving skills,Number skills,Analytical skills,Logical,Team working,Initiative,Non judgemental,Patience,Physical fitness....Read more...
Based in north Swansea, a local pharmacy team is seeking an ambitious Accuracy Checking Pharmacy Technician (ACT) to join them in delivering forward-thinking pharmacy care.A spacious and modern store, the pharmacy has 2 fully-outfitted consultation rooms for patients to access additional NHS and private services (including seasonal vaccinations, stop smoking support and Pharmacy First) alongside their prescriptions.The team has also invested in a cutting-edge PMR system that greatly streamlines the dispensing process for you and improves safety for your patients.As an ACT, you’ll get involved in both sides: you’ll join strong support colleagues in ensuring the technical/dispensing services are running as efficiently and reliably as possible, and you’ll also support the Pharmacists in interacting with patients, delivering clinical services and contributing to a key area of development within the pharmacy.Previous services experience is not essential as full training will be provided.This is a permanent position for an Accuracy Checking Technician, ideally full-time.We can consider an experienced Pharmacy Technician who is looking to complete their Accuracy Checking course for this role.Part-time may also be considered.Person specification:
(Essential) NVQ Level 3 in Pharmacy Service Skills or Level 3 Diploma in Principles and Practice for Pharmacy Technicians(Essential) Registration with the GPhC(Desirable) Accuracy Checking certification
Benefits and enhancements include:
Further learning and development opportunities, including in pharmacy services33 days’ annual leaveStaff discountOn-site parkingLocal amenities and bus links nearbyPension scheme....Read more...
.NET Software Engineer - Remote / USA
(Tech stack: C# Developer, .NET, Microsoft Dynamics GP, Microsoft Dynamics CRM, Power Platform, Power Automate, Power Apps, SQL Server, ASP.NET, REST APIs, Azure Functions, WPF, Web Services, Full Stack Developer, .NET Engineer)
Our client is a leading Microsoft consultancy known for delivering enterprise-grade solutions to a range of industries, including financial services, manufacturing, and technology. They are embarking on a significant programme of work to modernize and extend the functionality of their clients’ Microsoft Dynamics ecosystems through robust .NET solutions.
We are seeking a C# Developer with experience building enterprise applications and integrating systems with Microsoft Dynamics GP and Dynamics CRM. This is a fantastic opportunity to take ownership of your projects, working the full software development lifecycle on high-impact, business-critical systems.
C# Developer applicants should have a strong grasp of: C#, .NET, Microsoft Dynamics GP, Microsoft Dynamics CRM, and SQL Server. Additional exposure to ASP.NET, REST APIs, WPF, Azure Function Apps, and Power Platform (Power Automate / Power Apps) is desirable but not essential. Familiarity with Agile methodologies is also advantageous.
You will receive world-class support and ongoing training in modern technologies such as: Azure, Power Platform, Microservices, and the latest .NET developments. This is a fantastic opportunity to work on enterprise-level systems that will significantly enhance your technical profile.
Our client is committed to attracting and retaining top-tier C# talent by offering challenging work, a collaborative team culture, structured career development, and above-market compensation.
Location: Remote / USA
Salary: $100,000 - $130,000 + Bonus + Benefits
Applicants must be based in the USA and have the right to work in the USA. This is a remote-first position.
Noir continues to be the leading Microsoft recruitment agency; we can help you make the right career decisions!
NOIRUSANETRECNOIRUSAREC....Read more...
A leading ServiceNow Partner is seeking an experienced Arabic-speaking Project Manager to oversee the delivery of ServiceNow programmes across the UAE. Based in either Dubai or Abu Dhabi, this role is pivotal in ensuring the successful implementation of complex ServiceNow solutions for high-profile public and private sector clients.
You will be the key interface between stakeholders, technical teams, and ServiceNow leadership ensuring projects are delivered on time, within scope, and to the highest standards.
Key Responsibilities:
- Lead end-to-end project delivery of ServiceNow implementations, upgrades, and enhancements.
- Work closely with Arabic-speaking clients to manage expectations, scope, timelines, and budgets.
- Define project plans, allocate resources, and manage risks and dependencies throughout the lifecycle.
- Facilitate workshops, progress meetings, and governance sessions in both Arabic and English.
- Coordinate internal teams and third-party vendors to ensure seamless execution and issue resolution.
- Track project KPIs, prepare regular status reports, and manage stakeholder communications.
Requirements:
- Fluent in Arabic and English (written and spoken) essential.
- Proven experience delivering ServiceNow projects, ideally in a consulting or partner environment.
- Strong understanding of the ServiceNow platform and its core modules (ITSM, ITOM, HRSD, etc.).
- Excellent leadership, communication, and stakeholder management skills.
- Experience managing enterprise-level projects with cross-functional delivery teams.
- Relevant certifications are highly desirable:
Project Management (PMP, PRINCE2, Agile/Scrum)
ServiceNow certifications (CSA, CIS) are a plus. - Ability to work on-site in either Dubai or Abu Dhabi.
Whats in it for you:
- Join a market-leading ServiceNow Partner with a growing footprint in the Middle East.
- Play a lead role in delivering digital transformation projects that make a real impact.
- Excellent salary, visa sponsorship, and relocation assistance provided.
- Career progression, ongoing training, and access to ServiceNow certifications.
- A collaborative, multicultural team environment focused on quality and innovation.
Interested in driving high-impact ServiceNow projects in the UAE?
Apply now or get in touch with us directly to learn more about this opportunity.....Read more...
