Frequent conversion includes turning new vehicles into welfare, racking/utility, command centre, rescue/blue light and onboard power systems. With more mechanical work being undertaken on welfare units with servicing, maintenance, generator repair, running gear servicing, and fuel system repair/replacement.
Automotive electrical fitter:
This role involves the installation and maintenance of the following equipment, but not limited to, below:
12V Auxiliary batteries
12V Charging systems, including DCDC converters and split charge contactors
12/48V – 240V Power inverters
12/48V Control/monitoring systems
12V Accessories, including but not limited to, handwash units, parking sensors, additional lighting, warning equipment, and extraction fans
Solar panels installation includes isolation switches and solar controllers
Wiring of consumer units, including MCB, RCD’s etc.
Wiring up of 240V sockets and switches
Position, assemble, install, and dismantle electrical plant and equipment, which may include motors, switchgear, cables and conductors, to agreed specifications
Carry out planned, unplanned and preventative maintenance procedures on electrical plant and equipment
Replace, repair, or remove components in electrical plant and equipment and ensure its return to operational condition
Diagnose and determine the cause of faults in electrical plant and equipment
Skills required:
The role would include the regular use of the following skillsets:
Soldering of wiring, either new connections or connections to existing wires.
Terminal crimping, from smaller ferrules to larger battery cable crimps.
Measuring and marking of drilling/mounting points.
Drilling of multiple materials, wood, plastic, and metal.
Measuring of voltage, resistance, current etc.
Following drawings and wiring diagrams/schematics.
Stripping of vehicle panels and interiors.
Following health and safety guidelines.
Using hand and power tools to complete installation work.
Fault finding skills and logical thinking.
Basic metal working skills to mount equipment.
Ability to identify different cable types.
Ability to identify electrical components.
Training:Training will be at Doncaster College where you will access a wide range of facilities on offer.
Day release.
You will undertake Maintenance and operations engineering technician electrical Level 3 Standard.
Maintenance and operations engineering technician / Institute for Apprenticeships and Technical Education.
You will undertake both on and off-the-job job training by a team of industry-qualified professionals to give you the best skills, knowledge, and experience. Training Outcome:Successful completion of the apprenticeship could lead to a higher-level apprenticeship or full-time employment for the right candidate.Employer Description:Lyndon Systems Ltd is one of the UK’s leading vehicle conversion companies based in Doncaster, specialising in welfare vans, minibuses, and bespoke work vehicles. We operate across two production sites and a mobile division, with ISO 9001:2015 certification and plans to implement ISO 14001 and ISO 45001 as part of an Integrated Management System (IMS). Our dedicated safety and quality team is committed to building a culture where people and the planet come first.Working Hours :Monday - Thursday, 08:00 to 17:00. Friday, 08:00 to 14:30.Skills: Communication skills,Attention to detail,Organisation skills,Problem solving skills,Presentation skills,Number skills,Analytical skills,Logical,Team working,Initiative,Non judgemental,Patience,Physical fitness....Read more...
AV Support / Service Engineer – This is a new fresh position seeking someone with at least 5years of service experience. The position is after a very technical AV Engineers that has the ability to fault find / fix and maintain integrated AV systems that have been installed in a one-off environment. You will look after 2 close sites that have state-of-the-art AV solutions. I will need you to have the right av and experience that encompasses the following:
Large scale LED videowalls (Barco, Christie and beyond)
Crestron Control
Q-SYS AUDIO VIDEO CONTROL
Good understanding of commercial audio
Digital Signage Display systems
Be client facing
Be able to work in a time sensitive environment
Be a Team player
Be able to think outside the box
Excellent hands-on AV skills
If this position matches your skills and experience, then please send me your full CV that clearly shows all skills and certifications
YOU MUST BE LIVING IN THE UK AND ALLOWED TO WORK HERE LEGALLY AND SHOW A CLEARLY DEFINED SKILL SET WITHIN THE CV
AV A-V A/V AUDIOVISUAL AUDIO-VISUAL AUDIO/VISUAL SOUND AUDIO Q-SYS QSYS DSP CRESTRON VIDEOWALL LED BARCO DIGITAL SIGNAGE CHRISTIE MICRO-TILES SERVICE SUPPORT MAINTAIN MAINTENANCE BREAK FIX LONDON ESSEX KENT....Read more...
AV Installation Engineer - This is a new role in today for a friendly bespoke AV systems integration company. They are very busy at the moment and are looking to add to the team a new experienced member that has at least 1-2years high end residential audio visual experience. Ideally you will live in SURREY and happy to work in a professional environment that delivers a first client service to a discerning end user client base. You will ideally be able to install both CRESTRON and Lutron Lighting Systems. Your hands on skills need to be really good and if you also have experience with IT Home Networking that would be of interest. The role comes with a vehicle the the ability to drive is needed. If you are interested in working for a company where you will be in a team and not just a number then please send me your fully technical CV that clearly shows your audio visual skills.AV A/V A-V AUDIOVISUAL AUDIO-VISUAL AUDIO/VISUAL BESPOKE SMARTHOME AUTOMATION HOME CINEMA CONTROL4 RAKO SONOS LUTRON CRESTRON CI CUSTOM INSTALL INSTALLATION RACK NETWORKING WYRESTORM DRAYTEK CEDIA HERTS HERTFORDSHIRE LONDON....Read more...
The Job
The Company:
One of the largest fluid power distributors in the UK and Ireland
They have a great reputation in the market, they perform at the high end of the industry
Have been dominating the fluid power distribution market for over 30 years
Will be opportunities to progress and grow within the company
The Role of the Design Engineer
Designing Hydraulic Systems.
Overall budget responsibility for products.
Generate drawings using 3D CAD systems.
Liaising with customers on specifications and requirements.
Liaising with other departments within the company to move designs to production.
Creating technical documents and manuals for products.
Benefits of the Design Engineer
£40,000 - £55,000 DOE
25 Days annual leave + Bank holidays
Pension
The Ideal Person for the Design Engineer
Mechanical Engineering Degree or similar.
Ideally a background in Hydraulics but can consider pneumatic / machine builder backgrounds.
Experience with budgetary responsibility of projects.
Strong interpersonal and communication skills.
If you think the role of Design Engineer is for you, apply now!
Consultant: Joshua Cumming
Email: joshuac@otrsales.co.uk
Tel no. 0208 397 4114
Candidates must be eligible to work and live in the UK.
About On Target
At On Target, we specialise in sales, technical and commercial jobs in the Engineering, Construction, Building Services, Medical & Scientific, and Commercial & Industrial Solutions sectors, enabling our consultants to become experts in their market sector. We place all levels of personnel, up to Director across the UK and internationally.....Read more...
We have an exciting new job opportunity for a Software Support Engineer based in Isle of Wight, to join this electrical engineering and software company.
As a Software Support Engineer, you will provide technical support to existing customers globally and enable the communication between customers and the R&D team. You will provide support and guidance to global customers to understand their requirements and recommend technical solutions to meet their needs.
Key skills required for this job as Software Support Engineer, based in Isle of Wight:
Degree level technical qualifications in engineering or software-related subjects
Proven experience in troubleshooting and deploying software packages and solutions
Strong background in software and systems engineering
Experience with Microsoft operating systems set-up and troubleshooting
Knowledge of relational databases, networking and communication protocols
Good communication skills both verbal and written
This position as Software Support Engineer will be based on site in Isle of Wight.
This is a fantastic chance to join a multinational company who can offer the opportunity of career progression and personal development, working on the latest technology.
To apply for the position as Software Support Engineer, please send a copy of your CV to rwilcocks@redinegroup.Com, or for more information contact Ricky Wilcocks on 01582 878810 or 07931788834.....Read more...
Our client is a well-respected law firm delivering exceptional legal advice across property, family, private client and commercial law.
They offer their employees development opportunities, a friendly and supportive team environment, and benefits that include above average holidays.
They now have an opportunity for an experienced Private Client Paralegal to join either their Rainhill or St Helens office, assisting the Head of Department with a mix of client-facing and administrative duties which include preparing Wills, LPAs, Trusts, and probate paperwork, and managing estate administration cases with precision and care.
Key responsibilities of the role will include:
- Handling calls, provide cost estimates, book appointments, and update clients.
- Opening files, carry out ID/due diligence checks, and prepare legal documents.
- Managing billing, draft correspondence, handle dictation, and update systems.
- Conducting estate checklists, searches (Bankruptcy, Will Search, Land Registry), and arrange valuations.
- Liaising with third parties, manage estate debts and expenses, and obtain tax/DWP information.
- Supporting file closure and post-completion enquiries.
The ideal candidate will have a minimum of 12 months Private Client law including knowledge of probate, estate administration, Wills, and LPAs, excellent communication, empathy, great organisation and multitasking skills, proficiency in Microsoft Office and legal case management systems, and a flexible, proactive, and detail-focused approach.
If you want to join a respected private client team, work across varied matters, and make a difference to clients lives then please dont hesitate to apply. ....Read more...
We are seeking an experienced SolarWinds Implementation Specialist to join our clients team in Abu Dhabi. This is an onsite, customer-facing position requiring full dedication to the implementation, configuration, and ongoing support of SolarWinds monitoring solutions. You will play a critical role in delivering and maintaining robust network and systems monitoring for a high-availability environment.Key Responsibilities:
- Lead the end-to-end implementation of SolarWinds products, including installation, configuration, and integration with existing systems.
- Design and develop SolarWinds dashboards, alerts, and reports tailored to business and technical requirements.
- Conduct performance tuning, health checks, and troubleshooting of SolarWinds environments.
- Collaborate with cross-functional teams to ensure seamless integration and maximum system uptime.
- Provide 24/7 support for critical monitoring and alerting services, responding to incidents in real time.
- Document all processes, configurations, and standard operating procedures.
- Train customer teams on SolarWinds usage and best practices.
Requirements:
- Proven experience in SolarWinds Orion Platform deployment and management.
- Strong understanding of network infrastructure, servers, and application monitoring.
- Proficient in SolarWinds modules such as NPM, NTA, NCM, SAM, and others.
- Hands-on experience with SQL queries, SNMP, WMI, and API integrations.
- Excellent problem-solving skills and ability to work under pressure.
- Onsite availability in Abu Dhabi with flexibility for 24/7 support shifts.
- Strong communication and customer engagement skills.
Preferred Qualifications:
- SolarWinds Certified Professional (SCP) certification.
- Experience in high-availability or mission-critical environments.
- Background in ITIL processes and IT service management tools.....Read more...
An average day for a metal fabricator apprentice at Solinear’s factory involves:
Morning Briefing: Reviewing job sheets and safety checks with the team
Workshop Tasks: Cutting, drilling, and welding aluminium or steel components using hand tools and machinery
Assembly: Assisting in assembling bespoke solar shading and façade systems
Technical Skills: Learning to read engineering drawings and CAD plans under supervision.
Quality Control: Checking measurements and finishes meet standards
Maintenance & Clean-Up: Ensuring tools are maintained and the workspace is clean
Throughout the day, apprentices work alongside skilled fabricators, gradually taking on more responsibility as their skills develop.Training:You will attend York College on day release.Training Outcome:
Welder / Fabricator
Factory Operative
Employer Description:Solinear Ltd is a leading UK specialist in the design, manufacture, and installation of architectural metalwork, including solar shading, louvres, balustrades, and bespoke façade systems. Based in York, the company works on high-profile construction projects nationwide, delivering innovative, sustainable solutions with a strong focus on craftsmanship, quality, and design excellence.Working Hours :Monday – Friday 8am – 4pm.Skills: Reliable,Hardworking,Willingness to learn....Read more...
Monitoring email inboxes for Sales Orders, Queries, Requests for Quotations, Supplier Invoices
Updating Bespoke software with orders, invoices, new accounts, and discounts
Sending sales invoices
Processing customer credit card receipts
Entering purchase invoices
Booking dispatches onto courier systems
Assisting with general administrative duties, such as filing
Taking incoming telephone calls and taking messages
Training:Business Administrator Level 3 Apprenticeship Standard:
An apprenticeship includes regular training with a college or other training organisation
At least 20% of your working hours will be spent training or studying
Training Outcome:
The apprentice will gain experience of various IT systems, including Microsoft Excel and Word, bespoke order processing software, Xero Accounts, and Courier software
We want the apprentice to complete the apprenticeship and to progress into a full-time permanent member of the sales admin team
As the business grows, we expect them to take on more responsibility
Employer Description:National distributor of automatic gate and door access, control, and safety equipment.Working Hours :9.00am - 5.00pm each day.
Half an hour lunch break.Skills: Communication skills,IT skills,Attention to detail,Organisation skills,Team working....Read more...
Assisting with day-to-day HR administration including recruitment, onboarding, and employee records
Supporting internal communications and maintaining confidential documentation
Managing diaries, scheduling meetings, and preparing reports
Handling correspondence and responding to queries professionally
Contributing to HR projects and initiatives
Learning and applying business processes and systems
Training:
Business Administrator Apprenticeship Standard - Level 3
College training/support dates available if required
On the job training to support role development
Employer to allocated dedicated training time for Off The Job training requirements
Training Outcome:
There are future career development opportunities within HR and administration upon successful completion of the Level 3 qualification
Employer Description:Rittal is a leading global supplier of enclosure systems, automation and infrastructure with its industrial, IT, energy and power, cooling and service units. Rittal products and solutions are used in over 90% of global industries - standardised, customised, and always of the very best quality.Working Hours :Working Monday - Friday, based at out site in Broadley Industrial Park, Roborough, Plymouth. Shifts to be confirmed.Skills: Communication skills,IT skills,Attention to detail,Organisation skills,Team working,Initiative,Ability to work independently,Willingness to learn....Read more...
Installing plasterboard on walls and ceilings
Measuring, cutting, and fixing boards to metal or timber frames
Applying jointing or taping and filling techniques
Understanding different drylining systems (e.g., partitions, shaft walls, linings)
Interpreting drawings and technical plans
Safe use of hand and power tools
Working to health and safety and site standards
Training:
Workplace: With employers in and around Bristol
Training: Delivered at our Bristol, Bedminster training centre(Attendance is required for 3 consecutive days every month
Training Outcome:
Work as a qualified dryliner
Progress to a Level 3 Advanced Apprenticeship (e.g., Site Supervisor)
Specialises in taping and jointing, suspended ceilings, or acoustic systems
Move into supervisory or site management roles
Employer Description:Lumini Developments Ltd is a forward-thinking construction and interior fit-out company with a growing reputation for delivering high-quality residential and commercial projects across the South West. We specialise in modern construction methods, with a strong focus on drylining, partitioning, and interior finishes.Working Hours :Monday - Friday 7am - 4pm.Skills: Communication skills,Attention to detail,Organisation skills,Customer care skills,Problem solving skills,Logical,Initiative,Physical fitness....Read more...
During your first 2 years you will rotate around a variety of departments, completing daily, weekly and month tasks:
Production - hands-on presswork, sheet metal, light assembly, CNC machine operating & setting
Engineering Services - tool asembly, machining, grinding, wire eroding
Technical Sales - CAD design , master data, customer enquiries, product design & development
Qulaity Engineering - measurement studies, calibration, problem-solving, procedures and data analysis
Training:This is a Level 3 Engineering and Manufacturing Support apprenticeship, delivered over a 36 month period.
The apprentice will attend the training centre, In-Comm Training Services in Aldridge, WS9 8UG, 2 and a half days per week for the first 14 months.Training Outcome:Full-time posiiton with growth opportunities with progression through to a Level 4 / HNC potentially.Employer Description:Established in 1872, Cooke Brothers has a long established history and reputation for supplying hinges for standard and bespoke applications, at home and overseas. We specialise in architectural ironmongery and in metalwork production such as:
Architectural Hinges
Continuous Hinges
Engineering Hinges
Door Hardware
Door Systems
Shelf Support Systems
Bespoke Products & ServicesWorking Hours :7.30- 4.35pm Monday - Thursday
7.30- 1.00pm FridaySkills: IT skills,Attention to detail,Problem solving skills,Presentation skills,Analytical skills,Logical....Read more...
Support the development, optimisation, and user engagement of Microsoft Dynamics 365 CRM.
Key responsibilities include maintaining CRM data integrity, generating performance reports, supporting teams with dashboards and insights, and helping to implement digital tools and systems. The apprentice will collaborate with colleagues to translate complex data into actionable insights and support the organisation’s mission to help employers develop tech and digital talent across the West Midlands and beyond.
This role also champions a culture of accountability and continuous improvement by promoting best practices in data use and digital transformation, aligned with TDM’s core values.
Core Values (Right Person):
Do Well by Doing Good
Gain Creativity by Being Driven
Gain Control by Being Accountable
Gain Impact by Being Productive
Gain Trust by Being Considerate
Gain Growth by Being Vulnerable
Core Responsibilities (Right Seat):
Provide technical and application support to internal stakeholders via email, phone, video conferencing, and helpdesk systems.
Monitor and maintain data quality within the CRM, ensuring all records and information are accurate, complete, and up to date.
Create and manage views, filters, and saved lists in the CRM to support sales and marketing operations.
Use tools such as Hunter, LinkedIn, and Co-Pilot to source accurate contact information and create targeted marketing lists within the CRM to support campaign planning and execution.
Research prospective employer contacts and organisations to enrich CRM data and support business development.
Generate data reports from the CRM to support analysis of activities, pipelines, and live accounts.
Support the analysis of simple and complex data to meet business reporting needs, using various techniques to validate results, identify faults, and implement remedies to ensure data integrity.
Collate and format data to facilitate processing and presentation for review, in accordance with the organisation's policy and procedures and recognised industry good practice.
Assist in training relevant TDM team members by delivering internal sessions on CRM functionalities, features, and best practices. Ensuring there are continuous revised guides and FAQs spaces in the staff vle for the team members to refer to.
Document actions and maintain audit trails for issue resolution and system changes.
Collaborate with the CRM provider, the Business Support team, and external stakeholders to research CRM capabilities, support system enhancements, troubleshoot issues, and implement new functionalities that improve efficiency and reduce manual processes.
Explore automation opportunities between systems, aiming to reduce duplication and improve data accuracy.
Manage and prioritise digital support tasks using ticketing systems, calendars, and project management tools.
Support continuous improvement initiatives, including digital transformation and system enhancements.
Maintain data security and confidentiality protocols while ensuring compliance with all TDM policies, procedures, and legal responsibilities, including safeguarding, ISO9001, Data Protection, Cyber Essentials, and confidentiality standards.
Perform any other duties as directed by your line manager and/or a Director.
Training:Digital Support Technician Level 3 Apprenticeship Standard
The successful candidate will undertake an 18-month nationally recognised qualification delivered by TDM. This work-based learning programme includes quarterly block training days delivered via our virtual learning environment, weekly off-the-job training, and monthly coaching sessions.
You will be expected to demonstrate all required competencies and behaviours outlined in the apprenticeship standard, leading to successful qualification. Training will be delivered through Totara, our digital learning platform, which supports both asynchronous and synchronous learning for off-the-job training.
A designated workplace mentor will support your development throughout the programme. At the end of the apprenticeship, you will complete an End Point Assessment (EPA) conducted by an external assessment organisation (EPAO).
This is a Level 3 qualification. Knowledge modules include:
Digital Technologies.
Data Management and Information Systems.
Support and Security Concepts.
Training Outcome:Opportunity to progress into a full time position and higher level apprenticeship.Employer Description:The Development Manager are a Government funded training provider supporting employers across England through the delivery of tech and digital apprenticeships and training from Level 3 through to Degree.Working Hours :Monday to Friday, 9am to 5pm.Skills: Communication skills,IT skills,Attention to detail,Organisation skills,Customer care skills,Problem solving skills,Administrative skills,Number skills,Analytical skills,Logical,Team working,Initiative,Patience....Read more...
AV Field Service Engineer (London or Home Counties) – Are you a top of the pile Audio Visual field engineer now looking for a new working environment? I am looking for a London or Home Counties based candidate who can work to the highest standard of customer satisfaction. The main aspect of this position is to fix faults (service) and to keep clients systems working to the desired specification within the blue chip / corporate / hospitality market place. You will have an excellent head on your shoulders for fault diagnostics and be able to find problems that occur on integrated AV systems. This could be a simple connector or issue or something much darker. Hands on skills need to be second to none and you need to work in a quick / efficient manner whilst keeping the end user client happy and informed. All paperwork needs to be completed signed off and handed in on time. This position will involve European TRAVEL. If you have basic programming experience of Crestron, DSPs or knowledge of AV switching and Videowalls that would be nice to see on your CV. Previous experience with audio and video along with control systems is an absolute must. The role will offer training and development in industry related courses company for the candidate that shows the aptitude and willingness to develop. So if you have the need to work for a small friendly AV integrator then please send me your full detailed CV today.NO SPONSORSHIP IS ON OFFER YOU MUST BE IN THE UK / COMING TO THE UK TO BE CONSIDERED OR HAVE THE APPROPRIATE WORKING VISACRESTRON EXTRON QSYS DSP AUDINATE DANTE SERVICE CONTROL VIDEOCONFERENCE NETWORKING RACK CISCO CTS VC AUDIOVISUAL AV SOUND LIGHTING AUDIO VIDEO VISUAL A/V AUDIO/VISUAL VIDEOWALLS LED PROJECTOR AUTOMATION LONDON ESSEX KENT SURREY HERTS BEDS BUCKS BUCKINGHAMSHIRE BERKSHIRE BEDFORDSHIRE....Read more...
An opportunity has arisen for aHGV Technician (Gas Tanker) to join a well-established organisation, logistics for biogas and alternative fuels, including LNG, CNG, LCO2, and hydrogen transport services.
As a HGV Technician, you will be carrying out regular maintenance and safety checks on compressed gas storage vessels and specialist tankers. This full-time role offers salary range of £45,000 - £55,000 and benefits.
You will be responsible for:
* Servicing and inspecting vehicle-based cryogenic and compression systems.
* Diagnosing and resolving faults in line with transport regulations and internal safety standards.
* Ensuring all maintenance records, permits, and safety certificates are kept accurate and up to date.
* Supporting both on-site and mobile engineering requirements as part of a flexible working pattern.
* Participating in risk assessments to ensure safe handling, storage, and transport of hazardous materials.
* Advising and updating customers on the status of repairs or maintenance tasks.
* Offering technical support regarding the operation and maintenance of HGVs and gas handling equipment.
What we are looking for:
* Previously worked as a HGV Technician, HGV mechanic, Commercial Vehicle Technician, Truck Technician, Commercial Vehicle Mechanic, Truck Mechanic, HGV Gas Engineer, or in a similar role
* Background in cryogenic gas systems, including storage, transportation, and safety protocols is preferred
* Familiarity with ADR and DVSA standards and an understanding of regulatory compliance in gas transportation.
* Ideally have experience in biogas or energy sector.
* A valid HGV licence with CPC and ADR qualifications.
What's on offer:
* Competitive salary
* Life insurance
* On-site parking
* Private medical insurance
* Overtime availability
* Health & wellbeing programme
Apply now for this exceptional HGV Technician opportunity to work with a dynamic team and further enhance your career.
Important Information: We endeavour to process your personal data in a fair and transparent manner. In applying for this role, Additional Resources will be acting in your best interest and may contact you in relation to the role, either by email, phone or text message. For more information see our Privacy Policy on our website. It is important you are aware of your individual rights and the provisions the company has put in place to protect your data. If you would like further information on the policy or GDPR please contact us.
Additional Resources Ltd is an Employment Business and an Employment Agency as defined within The Conduct of Employment Agencies & Employment Businesses Regulations 2003.
Similar titles: Quality Engineer, Maintenance Engineer, Maintenance Technician, Service Engineer, Gas Service Engineer, Tanker Mechanic, Cryogenic Engineer, Compressed Gas Engineer, Dangerous Goods Vehicle Technician, Gas Tanker Engineer, HGV Gas Systems Engineer, Commercial Gas Engineer, Compressed Gas Engineer, Industrial Gas Engineer, Tanker Maintenance Engineer, ADR Technician, Gas Tanker Maintenance Engineer, HGV Tanker Maintenance Engineer, Biogas Technician
....Read more...
HGV & Trailer Technician £18 – £22ph Location Livingstone, ScotlandWe are looking for an experienced and driven HGV & Trailer Technician to join the team in the Livingstone depot. You would be working for a well-established commercial dealership, who are committed to delivering exceptional service and care to its clients. If you’re passionate about vehicle maintenance and diagnostics and want to work in a supportive, professional environment, this role is for you!Key Responsibilities for the HGV & Trailer Technician
Diagnose, repair, maintain and service commercial vehicles—both heavy goods vehicle units and trailers.
Conduct pre?MOT inspections and prepare vehicles for test lanes.
Perform fault finding and rectify mechanical, electrical, and brake issues to dealer standards.
Work to DVSA/VOSA technical standards throughout.
Liaise with parts department for orders and accurate record?keeping.
For trailer tech role: assemble and troubleshoot trailer electrical systems, cranes, tippers, handling hydraulic/pneumatic systems.
What We’re Looking For in a HGV & Trailer Technician Qualifications & Experience
NVQ Level 2 or Level 3 qualification in Heavy Vehicle Maintenance & Repair, or equivalent.
At least 2 years industry experience in heavy goods vehicles or trailer maintenance.
Experience doing DVSA/VOSA-standard inspections, MOT preparations, fault diagnosis, and rectification.
Technical Skills
Strong mechanical and electrical aptitude (especially for trailer systems.
Familiarity with tachograph installations/calibrations and service contracts.
Proficient in reading wiring diagrams and using diagnostic tools.
Personal Attributes
Detail?oriented and self-motivated.
Customer-focused, proactive in maintaining high service standards.
Team player who can also work independently.
Availability & Flexibility
Flexible: days, 4 on 4off, Night shifts available and Overtime.
Willingness to travel or attend mobile service calls as required.
Salary & Benefits (Indicative)
Competitive hourly rate up to £22, depending on experience
20 days paid holiday + bank holidays (with increases for length of service)
Company pension scheme
Free onsite parking
Full training and ongoing support to help you meet your goals
If you're an experienced HGV & Trailer Technician ready to take the next step in your career, apply now and be part of a trusted and professional team in the automotive industry or contact Sophie Ranson at E3 Recruitment....Read more...
An opportunity has arisen for aHGV Technician (Gas Tanker) to join a well-established organisation, logistics for biogas and alternative fuels, including LNG, CNG, LCO2, and hydrogen transport services.
As a HGV Technician, you will be carrying out regular maintenance and safety checks on compressed gas storage vessels and specialist tankers.
This full-time role offers salary range of £45,000 - £55,000 and benefits. You will have to relocate to West Sussex.
You will be responsible for:
* Servicing and inspecting vehicle-based cryogenic and compression systems.
* Diagnosing and resolving faults in line with transport regulations and internal safety standards.
* Ensuring all maintenance records, permits, and safety certificates are kept accurate and up to date.
* Supporting both on-site and mobile engineering requirements as part of a flexible working pattern.
* Participating in risk assessments to ensure safe handling, storage, and transport of hazardous materials.
* Advising and updating customers on the status of repairs or maintenance tasks.
* Offering technical support regarding the operation and maintenance of HGVs and gas handling equipment.
What we are looking for:
* Previously worked as a HGV Technician, HGV mechanic, Commercial Vehicle Technician, Truck Technician, Commercial Vehicle Mechanic, Truck Mechanic, HGV Gas Engineer, or in a similar role
* Background in cryogenic gas systems, including storage, transportation, and safety protocols is preferred
* Familiarity with ADR and DVSA standards and an understanding of regulatory compliance in gas transportation.
* Ideally have experience in biogas or energy sector.
* A valid HGV licence with CPC and ADR qualifications.
What's on offer:
* Competitive salary
* Life insurance
* On-site parking
* Private medical insurance
* Overtime availability
* Health & wellbeing programme
Apply now for this exceptional HGV Technician opportunity to work with a dynamic team and further enhance your career.
Important Information: We endeavour to process your personal data in a fair and transparent manner. In applying for this role, Additional Resources will be acting in your best interest and may contact you in relation to the role, either by email, phone or text message. For more information see our Privacy Policy on our website. It is important you are aware of your individual rights and the provisions the company has put in place to protect your data. If you would like further information on the policy or GDPR please contact us.
Additional Resources Ltd is an Employment Business and an Employment Agency as defined within The Conduct of Employment Agencies & Employment Businesses Regulations 2003.
Similar titles: Quality Engineer, Maintenance Engineer, Maintenance Technician, Service Engineer, Gas Service Engineer, Tanker Mechanic, Cryogenic Engineer, Compressed Gas Engineer, Dangerous Goods Vehicle Technician, Gas Tanker Engineer, HGV Gas Systems Engineer, Commercial Gas Engineer, Compressed Gas Engineer, Industrial Gas Engineer, Tanker Maintenance Engineer, ADR Technician, Gas Tanker Maintenance Engineer, HGV Tanker Maintenance Engineer, Biogas Technician
....Read more...
Quality Engineer Extraordinaire ð
Are you ready to join the quality team at an awesome engineering client? We are seeking a Quality Engineer who is devoted to championing excellence in safety, quality, delivery, cost, and people. If you have a rock-solid understanding of quality management systems and a burning passion for continuous improvement, root cause analysis, and taking corrective action, then this is the perfect job for you! Plus, you'll be part of a fast-paced, exciting engineering business in none other than the aerospace industry! ð
Responsibilities as Quality Engineer
- Support and drive company KPI's for safety, quality, delivery, cost, and people
- Dive into strategic projects related to quality and continuous improvement
- Unleash your detective skills through root cause analysis and take necessary corrective action
- Help in achieving the company's business strategies with flying colours
- Assist in internal and external audits, including supporting First Article Inspections (FAIR's) to AS9102 standards, ISO 9001/14001, and AS9100
- Understanding of NADCAP will earn you some extra brownie points! ð
- A professional qualification in engineering is preferred, but if you don't have one, show them what you've got!
- Flex your continuous improvement and problem-solving muscles ðª
- Become the go-to person for all quality matters
- Support, implement, and monitor all QA systems to ensure compliance like a boss
- Handle those pesky non-conformance reports (NCR's)
- Bring your understanding of manufacturing processes to the table, especially if you've worked in a manufacturing environment
- Thrive in a fast-paced environment and tackle challenges head-on
- Communicate like a pro with both internal and external stakeholders
Qualifications and Experience required as Quality Engineer
- Professional qualification in engineering preferred
- Background in precision machining and related functions is a huge plus
- Solid understanding of quality management systems
- Expertise in continuous improvement and problem-solving techniques
- Familiarity with AS9102, ISO 9001/14001, and AS9100 standards
- Knowledge of NADCAP gives you extra street cred
- Experience in a manufacturing environment, particularly with precision machining
- Excellent communication skills and ability to engage stakeholders at all levels
- Proactive and ready to thrive in a fast-paced environment
Benefits as Quality Engineer
- £43 - £44k ð°
- 39-hour week, Monday-Thursday 7.30 am - 4.30 pm and 7.30 am to 12.30 pm Fridays (hello, long weekends!) ð
- Opportunity to work with an awesome and diverse team
- Pension to secure your future
- Parking on site because hunting for parking spots is so yesterday
- Professional development and training opportunities to help you soar to new heights
- Supportive and inclusive work environment that values diversity and equality
- Chance to make a difference in a growing company committed to quality and continuous improvement
If you would like to apply for this role, please do so directly - or get in touch at alison.francis@holtengineering.co.uk....Read more...
Multiskilled Maintenance Engineer – £46,000 + Benefits Location: South London Hours: Monday to Friday Rotating Shifts Week 1: 10:00am–6:00pm Week 2: 6:00pm–2:00am Benefits: 25 Days Holiday + Bank Holidays, Overtime Available, Our client, a market-leading provider of commercial laundry and textile services, is looking to appoint a Multiskilled Maintenance Engineer at their busy site in South London Supporting sectors such as healthcare, hospitality, and industry, this is a fast-paced environment where engineering plays a key role in maintaining high levels of output and service. With continuous investment in automation and infrastructure, this opportunity offers stability, variety, and the chance to grow within a well-established team.
Role Overview The successful candidate will carry out both planned and reactive maintenance across a wide range of equipment and systems. Working closely with the production team, the engineer will play a key role in minimising downtime and driving performance improvements.
Key responsibilities include:
Diagnosing and repairing mechanical and electrical faults
Supporting ongoing site improvements and asset reliability
Following all health and safety policies and safe working practices
Accurately recording maintenance activities via the site CMMS
Ensuring smooth shift handovers and strong team communication
Candidate Requirements
Minimum of 3 years’ experience in a manufacturing or process-driven engineering role
NVQ Level 3 or higher in Engineering (BTEC, HNC, City & Guilds, or equivalent)
Strong mechanical and electrical skills, including fault-finding, pneumatics, and hydraulics
Ability to read and interpret technical drawings and schematics
Proactive and safety-conscious, with good communication and teamwork skills
Willingness to travel occasionally for training or support across other sites
Desirable Experience (Not Essential)
Background in commercial laundry, textiles, or high-volume processing environments
Steam systems experience (BOAS/BG01), chemical water treatment, or heat recovery
C&G 2391-52 Inspection & Testing
Welding and fabrication skills
Experience with permit-to-work systems or contractor control
What’s on Offer
£46,000 basic salary
Monday to Friday rotating shifts with no weekend working
25 days holiday plus bank holidays
Regular overtime available
Technical training and clear progression opportunities
Long-term career prospects within a growing international business
To apply or learn more about this opportunity, please get in touch for a confidential conversation. ....Read more...
Finance Business Partner, Hospitality, London, 60k-70k A leading international Leisure and Hospitality company is seeking a Finance Business Partner to support the F&B operations across multiple sites. The group, after rapid growth, is undertaking significant change to its organisational structure and a renewed focus on ways of working to drive long-term growth and efficiencyAs a Finance Business Partner, you will provide expertise through enabling data-driven decision modelling to achieve favourable outcomes for the business and will continuously search for ever better results, being not afraid to make decisions with limited information.Please note that only candidates with Hospitality experience, preferably restaurant, will be taken into consideration for the role.Responsibilities
Establish robust P&L reporting structures and configure POS systems to ensure accurate financial, tax, and inventory data.Lead monthly close processes and deliver timely, insightful performance reporting, including variance analysis for F&B P&Ls.Own annual budgeting and monthly forecasting for F&B, identifying risks, opportunities, and strategic actions.Analyse financial and operational trends, benchmark data, and drive margin improvement and cost control initiatives.Develop and enhance financial models to evaluate new initiatives, supplier contracts, and investment opportunities.Act as a trusted advisor, translating financial data into actionable insights and supporting F&B leadership and operational teams.Collaborate cross-functionally with commercial, operations, and finance teams to align strategies and optimise processes.Improve financial systems and controls, ensuring compliance and scalability while supporting continuous process improvement.
The ideal candidate
Excellent system and modelling skills (Excel, BI, Business Modelling tools, NetSuite, Sage and related systems). Working with PoS and integrations.Track record of strong financial performance and close relationship with key business teams and leaders.Strong business acumen/commercial thought and data-led problem-solvingAutonomous and adaptable, ability to organise and prioritise multiple tasks and deadlines.Ability to build strong relationships with other functions in the business to enable the successful delivery of business processes.Hospitality experience – previous work with F&B operations at hotels or equivalent at different scales and jurisdiction contexts.Qualified Accountant ACA/ACCA/CIMA (or equivalent) or qualified by experienceExperience with multi-site operations and international entities
....Read more...
To assist the IT Team as needed, contributing to the efficient and effective operation of the area
Assist in the support of desktop computers running operating systems including Windows, IOS & Chrome
Assist in support of college owned mobile devices, including laptops, tablets & mobile phones
Maintain up-to-date knowledge of computer equipment and assist with its installation
To become proficient in the application and use of a wide range of IT systems and processes
Receive and respond to incoming support calls and/or e-mails regarding computer & mobile device technical problems
Manage daily tasks to ensure service levels are achieved and proactive maintenance and change implementation objectives are met
Perform onsite analysis, diagnosis, and resolution of computer hardware problems and recommend and implement corrective solutions, including offsite repair as needed
Document instances of computer equipment failure, repair, installation, and removal
Tag or label IT equipment owned by the college; periodically audit inventories to mitigate risk of damage or theft
To provide technical and operational support to Events
To support College policies, procedures and quality assurance systems. To conduct aspects of all duties and responsibilities in line with the College’s Health & Safety Policy in the interests of themselves, other colleagues and students
To perform such other reasonable duties commensurate with the grade of the post as required by the Principal and Chief Executive
Training:
Level 3 Information Communication Technician Apprenticeship Standard
Location - Darlington College
Working 5 days per week inclusive of 1 day release for study at Darlington College
Training Outcome:
There may be an opportunity to secure a long term position after successful completion of the apprenticeship
Employer Description:Here at Darlington College we provide a huge variety of courses to suit the ambitions of every single student. Whether you are leaving school, considering a return to education, looking to enhance your career development, an employer seeking training for your employees, or simply want to learn for fun – we have a course for you. Our college is a state-of-the-art facility which offers varied learning with inspirational teaching from a wealth of experienced tutorsWorking Hours :Monday - Thursday, 8.30am - 5.00pm, Friday, 8.30am - 4.30pm with day release to College.Skills: Communication skills,IT skills,Attention to detail,Organisation skills,Problem solving skills,Administrative skills,Number skills,Analytical skills,Logical,Team working,Prioritise workload....Read more...
As part of the programme, you will rotate through other departments such as engineering, health safety & facilities and commissioning to further enhance your experience and understanding within these business areas. Successful completion of the course and suitable performance throughout the apprenticeship will lead to a permanent position being offered.
To follow instructions both written and verbal in order to learn and understand the basic skills and processes required in electrical installation activities
Attend college on a day-release scheme in order to achieve the necessary job related academic qualifications to support the in-company activities and skill sets
Learn how to read and interpret electrical engineering design drawings in order to carry out the installation, testing and commissioning of electrical components and sub-systems
Learn how to operate in a manner which does not endanger both the job holder and the personnel around him/her (Health & Safety at work)
Work from ladders & platforms to install, modify or repair electrical wiring, equipment, and fixtures
Uphold the company’s core values of Integrity, Innovation, Accountability, and Teamwork
Demonstrate behavior consistent with the company’s Code of Ethics and Conduct
It is the responsibility of every employee to report to their manager or a member of senior management any quality problems or defects in order for corrective action to be implemented and to avoid recurrence of the problem
Work in accordance with our ISO standards to ensure quality and compliance
Duties may be modified or assigned at any time to meet the needs of the business
Training:
20% off the job training - Newcastle College (ST5 2GB)
Training Outcome:
Could lead to a permanent position for the right person
Employer Description:Rapiscan Systems is an industry leader in detection technology, providing cargo and vehicle inspection systems and services for ports, borders, military, high-threat facilities, and checkpoints to help customers combat terrorism, drug smuggling, illegal immigration, and trade fraud. We offer a broad array of scanning system configurations that leverage low-, medium-, and high-energy X-ray technology—or multiple X-ray technologies—to address each customer’s unique security application requirements. Our commitment to excellence in imaging performance, innovative design, and uncompromising quality ensures our solutions consistently deliver best-in-class imaging, high reliability, and operator satisfaction, to help customers find threats and contraband with ease and confidence.Working Hours :Monday - Friday, 37 hours per week.Skills: Communication skills,Attention to detail,Team working,Initiative....Read more...
A world leader in the design and manufacture of leading edge technologies is looking for a Process Engineer- Fixed Term Contract to be based at their site in Melksham, Wiltshire to join their growing engineering team within the Defence industry.
The job of Process Engineer - Fixed Term Contract will be responsible for:
The main responsibilities for the job of Process Engineer, in Melksham, Wiltshire:
Create and implement IT systems and Applications to ensure streamlined manufacturing processes
Provide IT support to internal engineers
Assist with the setting up Lean manufacturing principles and continuous improvement
A successful candidate for the Process Engineer - Fixed Term Contract job will have the following:
Thorough understanding of MRP systems.
Proficient with Python scripts & JavaScript.
Experience with frontline operations platforms
This organisation supplies into the Defence industry therefore all candidates are required to be British Nationals. Visa sponsorship will not be provided.
This is a fantastic opportunity for a Process Engineer - FTC to join a global leader, offering fantastic career progression opportunities and very competitive salaries.
APPLY Now! For interested and qualified applicants for the Process Engineer job based in Melksham, Wiltshire please send your updated CV to rwilcocks@redlinegroup.Com for any questions or clarifications on the job. Alternatively, please call 079317 8834 OR 01582 87 8810.....Read more...
Data entry
Assisting with payroll calculations
Handling basic payroll queries
Liaising with HMRC where required
Learning payroll legislation
Maintaining confidentiality
Covering reception duties when required
Training:Payroll Administrator Level 3 Apprenticeship Standard:
A 100% tailored training and assessment program will be delivered to support you throughout your Apprenticeship, (21 months including endpoint assessment) topics covered include:
Business and Customer Awareness
Payroll Core
Pensions
Technical Payroll
Regulations and Compliance
Systems and Processes
Planning and Prioritisation
Analysis skills
Using Systems and Processes
Producing Quality and Accurate Information and Reports
You may need to complete level 2 maths and English Functional skills (if you cannot evidence prior grades)
Training Outcome:
A permanent position should the candidate prove successful
Employer Description:SMH Group offers a comprehensive suite of financial services to our clients including Accountancy, Payroll, Financial Services and Wills & Probate. We have over 150 employees across our 10 offices throughout the Yorkshire/Derbyshire region.Working Hours :Monday - Friday, 9.00am - 5.00pmSkills: Communication skills,IT skills,Attention to detail,Organisation skills,Customer care skills,Problem solving skills,Administrative skills,Number skills,Team working....Read more...
Update and maintain company databases with accurate information.
Use supplier systems to input and manage customer data.Operate remote servicing software for customers’ alarm systems and distribute service reports.
Handle incoming and outgoing correspondence via post and email.
Provide front-line support by answering calls, directing enquiries, and liaising with staff across departments and management levels.
Assist with the planning, organisation, and execution of projects.
Build and maintain positive, professional relationships with customers and colleagues.
Identify and help resolve issues related to office processes and communications.
Recommend and implement improvements to enhance administrative efficiency.
Use Microsoft Office applications, including Word and Excel, to support day-to-day tasks.
Take on additional administrative duties as required, demonstrating flexibility and a team-oriented approach.
Training Outcome:There may be an opportunity for a full-time role after successful completion of this apprenticeship.Employer Description:After years of professional security experience, we founded The On Call Group to help business owners and teams make their operations more streamlined whilst giving access to a large network of security consultants and technical system engineers all over the UK.Working Hours :Monday-Friday between 9.00am - 5.00pm.Skills: Communication skills,IT skills,Attention to detail,Organisation skills,Customer care skills,Administrative skills....Read more...
