We are seeking a skilled technician to work closely with the Senior Test Engineer at aircraft test facilities. You will work extensively with high-pressure gas and fluid systems.
Key Responsibilities
Proactively respond to any issues related to the engine or test site to ensure safety.
Assist in managing operations that involve hazardous materials.
Ensure that correct pressures are maintained in the feedlines during tests.
Assist lead Test Engineers with: site preparation and maintenance: conducting pressure and control system checks: instrument calibration and steam boiler operations.
Assisting with instrumentation, installation, and removal of flight engines before and after hot fire tests.
Required Skills and Competencies
Hands-on mechanical fitter or engineering skills, ideally gained within an engineering-focused organization.
A proactive attitude toward safety and operational support.....Read more...
An exciting opportunity has arisen for a SMT Engineer based in Nottingham to join a world leading Engineering and Manufacturing company. This is a fantastic chance to join a company developing lifesaving, safety critical equipment.
You will be responsible for low power, safety critical hardware to work with new and existing products, which are installed in hazardous areas. You will lead and implement new design from initial concept though to launch.
The successful candidate for the SMT Engineer job based in Nottingham will have a strong background in, SMT, PCB and Final Product Assembly processes and techniques, have a good knowledge of modern manufacturing techniques including, OPF, Lean and 5S, also have a relevant degree or equivalent qualifications and also a strong working knowledge of electronic assembly and processes including IPC-A-610 and J-STD-001. Ideally you will have experience leading a team and working with SMT machines and strong man-management skills.
This is a unique opportunity to join a leader in their market who can offer the opportunity for career progression and personal development, joining a well-established manufacturing site in Nottingham.
To apply for this SMT Engineer, based in Nottingham, please send your CV and covering letter to Rwilcocks@redlinegroup.Com, or for more information contact Ricky Wilcocks on 01582 878810.....Read more...
Static Air Conditioning Engineer – FM Service Provider – East Croydon – Up to £54,000 Are you an Air Conditioning Engineer looking for a new challenge?Looking to get off the road and move into a static role?Would you like to work for a leading Facilities Maintenance provider? An exciting opportunity has arisen to join an established building services company at a commercial site in East Croydon, comprising approximately 200,000 sq ft of Grade A, modern office space. CBW Staffing Solutions are currently recruiting for a Static Air Conditioning Engineer to carry out planned and reactive maintenance across a commercial contract in East Croydon. The successful candidate will have a strong understanding of Facilities Maintenance and a proven track record in commercial building maintenance. You will be working as part of a team of 3 engineers, operating solely on the landlord side of the building, ensuring the smooth operation and maintenance of all HVAC systems. This position is ideal for an experienced Air Conditioning Engineer seeking stability and long-term career progression within a reputable organisation. Key Duties & ResponsibilitiesService, maintenance, and repair of air conditioning and refrigeration systemsPlanned preventative maintenance (PPM) and reactive maintenance on HVAC plantWorking on split systems, VRVs, VRFs, VAVs, AHUs, FCUs, and chillersFault finding and diagnostics on AC and refrigeration systemsCarry out filter changes, belt replacements, and general plant servicingChecking and maintaining condensers and evaporatorsMonitoring system pressures, temperatures, and overall system performanceCarry out leak detection and basic repairs in line with F-Gas regulationsAssist with minor installations and system upgrades where requiredSupport seasonal plant changeovers (heating / cooling)Liaising with specialist subcontractors when requiredEnsure all statutory compliance checks related to HVAC equipment are completedMaintain accurate site records, logbooks, and maintenance reportsProvide a professional, client-facing serviceHours of Work & PackageMonday to Friday, 08:00am – 17:00pmSalary up to £54,000 per annum25 days holiday + Bank HolidaysOvertime availableTablet and work phone providedFull company uniformNo Call outRequirementsCity & Guilds Level 2 in Air Conditioning & Refrigeration (Essential)City & Guilds Level 3 (Desirable)F-Gas Qualification (Essential)Proven experience in commercial building maintenanceStrong HVAC knowledgeMulti-skilled with basic electrical knowledge desirableGood communication and client-facing skillsMust be able to provide copies of trade certificates If you are interested in this opportunity, please send your CV to Charlie Long at CBW Staffing Solutions to avoid missing out.....Read more...
£45,000 – £50,000 DOE ,Private Medical Insurance, 40 hours per week, Permanent contract, growing business.
A Production Engineer is needed for a leading automotive organisation operating within a specialist niche market, recognised as a top-performing brand in its sector. The business continues to expand across multiple UK locations while investing heavily in capability, systems, and people. This role is based at the UK Head Office near Marlow.
This hands-on Production Engineer position sits directly within production, supporting daily build activity, improving methods, and keeping assembly operations moving.
Key Responsibilities of the Production Engineer position
Act as escalation point for build faults, missing data, or unclear information
Implement rapid countermeasures to protect output, quality, and delivery
Develop and refine assembly methods, sequences, standards, and flow
Eliminate constraints using lean techniques including standard work, visual control, and balancing
Drive corrective actions through structured problem-solving tools
Maintain accuracy across BOMs, SOPs, and build documentation
Support defect resolution and prevent repeat occurrences
Prepare new variants for smooth transition from first build to repeat manufacture
Collaborate with operations, quality, engineering, stores, and supply partners
We would be keen to hear from people about the Production Engineer position that have:
Background within manufacturing, assembly, engineering
Strong production mindset with hands-on credibility
Confident interpreting drawings while managing options and variants
Practical experience delivering continuous improvement activity
Comfortable taking ownership through to resolution
What’s on offer for the Production Engineer opportunity.
Clear accountability across production activity
High visibility within operational teams
Broad exposure covering support, improvement, and change readiness
£45k–£50k package with private medical cover
Opportunity to deliver measurable impact on-site
If you would this sounds of interest – hit apply or please feel free to contact Rodger Morley at E3 Recruitment....Read more...
Fabric Engineer – Client Direct - Critical Site – Essex – £34,000 + Bonus CBW Staffing Solutions is currently recruiting for a Fabric Engineer to join a client-direct facilities team based at a unique and highly specialised site in Essex. This is an exciting opportunity to work with a dedicated maintenance team that keeps critical building systems running smoothly in a secure, technologically advanced environment. This role offers far more than a standard maintenance position. You will be working within a well-managed estate supporting key operations, using modern facilities and equipment while maintaining the highest standards across the site. The successful candidate will have a strong background in fabric and general building maintenance within a commercial environment. In return, the company is offering a competitive salary of £34,000, a 10% bonus, excellent benefits and strong long-term career opportunities. Hours of Work:Monday to Friday08:00 am – 16:00 pm (flexible – can also work 07:00 am – 15:00 pm)1 in 6 Call-Out (after site familiarisation) Key Duties & Responsibilities:Carry out planned preventative maintenance (PPM) and reactive fabric maintenance tasks via the site ticketing system.Conduct daily and periodic building inspections, identifying and scheduling reactive works where required.Respond to building fabric issues promptly to ensure safe site operations and minimise disruption.Carry out routine maintenance and periodic condition assessments to maintain high-quality finishes across the site.Support specialist contractors during maintenance works, surveys and inspections.Maintain accurate maintenance records and ensure tasks are updated through the CAFM/ticketing system.Promote a proactive approach to maintenance and suggest improvements or innovations to management.Participate in incident management and recovery exercises when required.Follow all risk assessments, safe systems of work and health & safety procedures.Work closely with the wider facilities team to ensure the smooth running of the site. Package:Base Salary: £33,000Additional Payment: £1,000 (role does not include working from home)10% Annual BonusBenefits Allowance: £2,640 (can be taken as a cash alternative to pension)Overtime available at double time on weekdays and weekends Key Benefits:26 Days Annual Leave + Bank HolidaysOn-site parkingNon-contributory career average pension scheme (guaranteed income for life)Private health insuranceDental insurance (Level 1)Life assurance (4x pensionable salary)Interest-free season ticket loanAccess to a wide range of voluntary employee benefits Requirements:Proven experience within fabric/building maintenanceExperience working within commercial or critical building environmentsStrong understanding of building fabric repairs and general maintenance tasksGood communication and teamwork skillsAbility to work safely and independently within a facility's environmentPlease send your CV to Bailey White at CBW Staffing Solutions to avoid missing out on this opportunity. ....Read more...
Propulsion Test Engineer with mechanical fitting expertise required. This position involves overseeing the design implementation, conducting Hot Fire Testing programs.
Key Responsibilities
Support in test activities across all hot fire and environmental test facilities.
Ensure comprehensive understanding and knowledge of all aspects of the firing sites, including site preparation, fuel and oxidiser handling, pressure systems, instrumentation, control systems, space thruster theory, steam boiler operation, data analysis, site and system safety.
Develop test, maintenance, and setup procedures for all test activities.
Requirements
Proficiency in mechanical fitting, preferably attained through completion of an apprenticeship or relevant experience within an engineering-oriented environment. Ideally holds qualifications equivalent to a graduate-level course in a related engineering field from OU or similar institutions. Must have undergone at least Level 4 training on the ....Read more...
We are looking for a skilled PLC Software Engineer. You will be involved in delivering high-quality engineering services and innovative solutions to water and wastewater clients across the UK.
Key Requirements
Commercial experience in PLC programming (ideally in the water or wastewater industry).
Siemens PLC training or experience.
Site commissioning experience, including testing, troubleshooting, and client support.
Strong understanding of automation and process control systems.
Knowledge of electrical control panels.
Relevant qualifications in Electrical or Electronic Engineering.
Full UK driving licence.
Key Skills
Design, develop, program, and test PLC control systems.
Specify, design, and build PLC software solutions based on client requirements.
Carry out on-site commissioning of control systems.
Provide technical support during installation and handover.
Work closely with internal teams and clients to deliver high-quality engineering outcomes.....Read more...
We are looking for a skilled PLC Software Engineer. You will be involved in delivering high-quality engineering services and innovative solutions to water and wastewater clients across the UK.
Key Requirements
Commercial experience in PLC programming (ideally in the water or wastewater industry).
Siemens PLC training or experience.
Site commissioning experience, including testing, troubleshooting, and client support.
Strong understanding of automation and process control systems.
Knowledge of electrical control panels.
Relevant qualifications in Electrical or Electronic Engineering.
Full UK driving licence.
Key Skills
Design, develop, program, and test PLC control systems.
Specify, design, and build PLC software solutions based on client requirements.
Carry out on-site commissioning of control systems.
Provide technical support during installation and handover.
Work closely with internal teams and clients to deliver high-quality engineering outcomes.....Read more...
Propulsion Test Engineer with mechanical fitting expertise required. This position involves overseeing the design implementation, conducting Hot Fire Testing programs.
Key Responsibilities
Support in test activities across all hot fire and environmental test facilities.
Ensure comprehensive understanding and knowledge of all aspects of the firing sites, including site preparation, fuel and oxidiser handling, pressure systems, instrumentation, control systems, space thruster theory, steam boiler operation, data analysis, site and system safety.
Develop test, maintenance, and setup procedures for all test activities.
Requirements
Proficiency in mechanical fitting, preferably attained through completion of an apprenticeship or relevant experience within an engineering-oriented environment. Ideally holds qualifications equivalent to a graduate-level course in a related engineering field from OU or similar institutions. Must have undergone at least Level 4 training on the ....Read more...
The Maintenance Electrician vacancy is working with a market leading Blue Chip Manufacturing firm in the Sittingbourne area. The position offers excellent opportunities for both training and career development and development. Fully automated site working with a market leading manufacturing firm.What’s in it for your as a Maintenance Electrician;
Hours of work – Monday-Friday DAYS
Salary – £57,000 per annum
Location - Sittingbourne
OT paid at 1.5x
Double Figure pension match
Employee Benefits Package
Training and career development opportunities
Main Duties & Responsibilities of Maintenance Electrician include:
Providing plant-wide maintenance service, departmental support and repairs ensuring that all production targets are maintained – maintaining factory manufacturing machinery
Monitor & supply Engineering support of machine set-up & changeovers to ensure that the product conforms to any quality assurance standards and ensuring changeovers are as efficient as possible.
Experience and Qualifications Required for Maintenance Electrician
Recognised Engineering Apprenticeship & Qualification or equivalent, e.g. NVQ, City and Guilds, ONC, BTEC or above – Mechanical or Electrical
High degree of Health & Safety awareness.
Ability to fault find, repair and provide solutions to problems.
The position may suit a Mechanical Maintenance Engineer, Electrical maintenance engineer, maintenance fitter, maintenance electrician, multi-skilled engineer etc....Read more...
Electrical Shift Engineer – FM Service Provider – Healthcare – West London – £45,000 CBW Staffing Solutions are currently recruiting an Electrical Shift Engineer to join a leading health-care campus in West London. This site is a modern, state-of-the-art facility with multiple specialist areas and cutting-edge equipment.You will be part of a skilled team of engineers who know the site inside out and will help you get up to speed quickly. The campus supports a large workforce and offers excellent amenities including multiple food outlets and break areas, ensuring you have everything you need during your working day.This is a fantastic opportunity to work in a supportive, collaborative environment, maintain complex electrical systems, and gain experience across a variety of high-tech facilities Key duties & responsibilitiesElectrical maintenance including lighting, fault-finding, small installations, lamping, ballast changes, control panels, and power distributionEmergency lighting inspections and maintenanceAir Conditioning: AHUs and FCUs (filter changes, cleaning, basic maintenance)Chiller re-sets and first-line troubleshootingWater treatment monitoring (temperature checks)Monitoring mechanical plant, pumps, motors, and plumbing (unblocking toilets, minor repairs)BMS system monitoring (hot & cold checks)Perform all allocated tasks professionally and within allocated timeframesProactively identify, report, and resolve faults with building services equipmentMaintain health & safety compliance, reporting/escalating issues where requiredMaintain clear communication with client staff and site management regarding service issuesEscort specialist subcontractors when requiredBe flexible with site attendance and tasks within competency Working Pattern4 on 4 off days and nights shift07:00-19:00, 19:00-07:00Package:Up to £45,00025 days holiday + Bank holidaysOvertime Opportunities - 1.5x & 2x at weekends Further training Pension Career ProgressionRequirements:Level 2 or 3 in Electrical Qualification18th Edition Wiring RegulationsPrevious experience in a hospital, medical facility, or critical-care environment preferredPlease send your CV to Fin Havering of CBW Staffing Solutions to avoid missing out on the role!....Read more...
The apprentice will be designing structures and drafting engineering drawings for the construction of buildings
With the help of a senior engineer, the apprentice will undertake structural analysis of steel, concrete, timber and masonry structures
Attending meetings with architects and contractors on-site with a senior Engineer
Training:
An accredited BEng degree with Nottingham Trent University on day release
The candidate will be on track to achieve IEng certification with the Institution of Civil Engineers upon completion of the apprenticeship
The apprentice will be trained by an in-house senior engineer, overseeing the apprentice on real projects in the office
The apprentice will attend CPD courses delivered by other companies in the industry
Training Outcome:The candidate will be on track to achieve IEng certification with the Institution of Civil Engineers upon completion of the apprenticeship, which can then lead to Chartered Engineer (CEng) certification. Employer Description:SA Consulting is a Structural and Civil Engineering Consultancy practice based near Derby with an associated office, Stroud Associates, in Ipswich. The practices are well-established and were formed over 20 years ago. Senior staff have over 30 years of experience in delivering innovative design solutions. We are a growing company with an ever-expanding workload and are keen to expand both the Derby and Ipswich branches. We are looking for talented individuals to share this journey and develop their careers with us. Working Hours :Monday to Friday, 9.00am to 5.00pm.Skills: Communication skills,IT skills,Attention to detail,Organisation skills,Problem solving skills,Administrative skills,Number skills,Analytical skills,Logical,Team working,Creative,Initiative,Patience....Read more...
Facilities Engineer required for a high tech Aerospace manufacturing site to perform building and equipment maintenance, corrective repairs and modifications to the Production Plant.
You will be responsible for applying fixes to productive equipment in an office environment and precision engineering Research and design facility containing hazardous chemicals and high pressure gas systems.
The ideal candidate will have a very practical attitude and experience of building maintenance tasks in various fields, e.g. carpentry, electrical, HVAC (heating, ventilation, and air conditioning), plumbing, compressor and boiler maintenance, site vehicle upkeep, machine shop fabrication including welding.
You will have
Plumbing, carpentry and fabrication experience.
Hand and electrical tools understanding.
Machine shop equipment knowledge, lathes, band / chop saws, pillar drills, grinders etc.
Welding and fabrication skills, City and Guilds Level 2 minimum, Level 3 preferred, or similar structural welding qualification. ASME certification would be an advantage.
Basic working knowledge of PC applications, such as use of Word and Excel.
Experience in a facilities maintenance or engineering fabrication environment.
Role will involve
General site fixes, repairs and maintenance activities.
Installing new appliances and equipment.
Site project works, such as new test and productions facilities installations and commissioning.
Fabrication and welding.
Liaising with, arrange and managing external contractors.
Inspecting, maintaining and troubleshooting equipment and systems (e.g. ventilation).
Check site control panels and electrical wiring to identify issues.
Provide and assemble office and production area furniture, shelving, racking, as required.
Upkeep of site vehicles. ....Read more...
Facilities Engineer required for a high tech Aerospace manufacturing site to perform building and equipment maintenance, corrective repairs and modifications to the Production Plant.
You will be responsible for applying fixes to productive equipment in an office environment and precision engineering Research and design facility containing hazardous chemicals and high pressure gas systems.
The ideal candidate will have a very practical attitude and experience of building maintenance tasks in various fields, e.g. carpentry, electrical, HVAC (heating, ventilation, and air conditioning), plumbing, compressor and boiler maintenance, site vehicle upkeep, machine shop fabrication including welding.
You will have
Plumbing, carpentry and fabrication experience.
Hand and electrical tools understanding.
Machine shop equipment knowledge, lathes, band / chop saws, pillar drills, grinders etc.
Welding and fabrication skills, City and Guilds Level 2 minimum, Level 3 preferred, or similar structural welding qualification. ASME certification would be an advantage.
Basic working knowledge of PC applications, such as use of Word and Excel.
Experience in a facilities maintenance or engineering fabrication environment.
Role will involve
General site fixes, repairs and maintenance activities.
Installing new appliances and equipment.
Site project works, such as new test and productions facilities installations and commissioning.
Fabrication and welding.
Liaising with, arrange and managing external contractors.
Inspecting, maintaining and troubleshooting equipment and systems (e.g. ventilation).
Check site control panels and electrical wiring to identify issues.
Provide and assemble office and production area furniture, shelving, racking, as required.
Upkeep of site vehicles. ....Read more...
Service Engineer Clearview New Build Competitive Salary Full Time Wakefield – UK travel 25 days Holiday + Bank Hols | Health cash plan | Pension Scheme | Personal development programmes through courses and training | Company Vehicle and Fuel Card for Business UseAbout us:Clearview New Build are a part of the £60m+ turnover, Conservatory Outlet Group, and are the leading installer of double glazing windows, and doors throughout the UK. To support our ongoing business growth, we have an opportunity for an experienced Service Engineer to join our team based out of Wakefield.At Clearview New Build it is important to us that we deliver an exceptional service to our customers. To achieve this, it is vital that our Service Engineers are quality focused, experienced, and passionate about providing excellent customer service. This is a great opportunity to work for a high profile, top-quality, forward-thinking business. About the Role:We are looking for a Service Engineer to travel to our customers and resolve issues across the UK. Responsibilities include:
Responsible for resolving issues with our windows, doors, and bi-folds.Provide excellent customer service whilst at customers' properties.Provide excellent quality of workmanship.Support the Engineering team to assist with resolving any issues as and when required.Strong knowledge and experience of site Health and Safety.The drive to achieve deadlines and KPI’s.Collect all relevant paperwork from HQ and load the van safely for the day.Ability to liaise with site managers whilst carrying out work duties.
What we are looking for:
Preferably New Build site experience.Must hold a valid CSCS Card.Previous experience in all aspects of window, door and bi-fold fitting.Excellent product knowledge with good problem-solving skills and the ability to identify cost efficient solutions to problems.Good customer service skills with the ability to apply a calm and polite approach when dealing with dissatisfied customers.A clean driving license.The ability to work on your own and use your own initiative.Good communication skills with the ability to communicate both verbally and in writing.A self-motivated individual who has a can do approach to work with the ability to get the job done in the required timescales.
How to apply:Ready to start your career with us? Apply with your CV INDHSEquals One is an advertising and recruitment agency working on behalf of our client to promote this vacancy. You may be contacted directly by the employer should they wish to progress your application. Due to the number of applications we receive, we are unable to provide specific feedback if your application is unsuccessful.....Read more...
Quality EngineerBridgwater, Somerset Full-Time | Permanent | Site based£50,000 to £60,000 doeMy Client as part of their continued expansion are strengthening their Product Excellence, Quality, and Compliance team.We are seeking a proactive and driven Quality Engineer to join our Bridgwater facility. This is a key role focused on improving product and process quality, resolving customer issues, and driving continuous improvement across operations.You will act as a central link between customers, suppliers, and internal teams, ensuring quality standards are consistently met and enhanced.Key Responsibilities
Act as the primary point of contact for customer and supplier quality issuesInvestigate customer complaints and non-conformances, conducting root cause analysis and implementing corrective and preventive actionsLead the development and implementation of process risk assessmentsDrive continuous improvement initiatives using Lean, Six Sigma, and WCM methodologiesMonitor and analyse quality KPIs, providing insights and recommendationsSupport New Product Introduction (NPI), influencing process design and quality standardsConduct yield and defect analysis, leading improvement activitiesDeliver training on quality standards, risk assessment, and improvement toolsImplement visual management systems to support operational excellenceIdentify and implement poka-yoke (error-proofing) solutions
About You
Proven experience in a Quality Engineer or similar role within manufacturingStrong knowledge of quality management systems and standards (e.g. ISO 9001, ISO 13485)Experience in root cause analysis, problem-solving, and continuous improvementConfident working with data, metrics, and performance analysisExcellent communication skills with the ability to work cross-functionallyHighly organised, methodical, and able to manage multiple prioritiesA collaborative team player with a proactive and self-motivated approach
Desirable:
Experience in food, medical, or high-care manufacturing environmentsKnowledge of Lean / Six Sigma tools and techniques
Benefits
22 days annual leave + 8 bank holidays (increasing by 1 day per year of service up to 25 days)Guaranteed Christmas & New Year shutdown (a few days reserved from annual leave allowance)Pension scheme (4% employer / 5% employee contribution)Free on-site parkingOn-site canteenAccess to Wellbeing 360Cycle to Work (Bike2Work) schemeCompany uniform providedOngoing training and development opportunitiesCareer progression within a growing organisation
If the role is of interest, then send your CV today....Read more...
Trainee Field Service Engineer Cambridge £26,000 - £27,000 + Overtime (OTE £35,000) + Van + Fuel Card + Full Training + Career Development + Local Patch This is the fantastic opportunity for someone eager to learn, gain hands-on experience, and receive the training needed to progress within the engineering industry. As a Trainee Field Service Engineer, you’ll work with a variety of CCTV security systems and access control across a local cambridgeshire patch, receive ongoing development, and have the chance to significantly boost your earnings through overtime.Due to expansion they’re looking to bring on a Trainee Field Service Engineer to join their team. With a supportive and collaborative working environment, the company offers the perfect setting for someone looking to grow their career in a technical field.Your Role as a Trainee Field Service Engineer will include:
Installing and servicing a range of CCTV security systems across the North
Ensuring all installations meet the highest standards
Troubleshooting and repairing faulty systems
The successful Trainee Field Service Engineer will need:
A full UK driving license
A willingness to learn and undergo comprehensive training
Excellent communication skills and the ability to work independently and as part of a team
Electrical qualifications or relevant experience
Please apply or contact 07458143259 for consideration
This vacancy is being advertised by Future Engineering Recruitment. The services of Future Engineering Recruitment are that of an Employment Agency.Please visit our website at futureengineer.co.uk to view other positions we are currently handling. Future Engineering Recruitment can only accept applications from candidates who have a valid legal permit or right to work in the United Kingdom. Potential candidates who do not have this right or permit or are pending an application to obtain this right or permit should not apply as your details will not be processed.We will endeavour to respond to all applicants however due to the sheer volume of response, we can only guarantee that candidates who have been shortlisted will be contacted.Junior Field Service Engineer, Electrical Engineering, Field Service, Electrical Maintenance, Troubleshooting Electrical Systems, Electrical Fault Diagnosis, Electrical Equipment Service, On-Site Service, Electrical Wiring, Electrical Testing, System Installation and Configuration, Preventative Maintenance, Technical Support, Field-Based Engineering, Hands-on Electrical Experience....Read more...
As a First Line IT Engineer you will:
Provide fist line IT support
Monitor Network & Server infrastructure
Taking phone calls on the service desk, handling service portal tickets and emails
Providing remote and on – site IT support where required
Responding to system failures in a timely manner
Creating and maintaining procedures for new and existing processes
Troubleshooting customer technical faults and driving fault resolution
Being able to look for solutions when hitting obstacles before escalating
Maintaining good customer relations by providing excellent customer service
Training:Estio apprenticeship training programmes are delivered virtually by our fully qualified and industry experienced training team. Using their expert knowledge, we’ve purposefully built our programmes around the real-world use of modern technology, so that the skills we create can be directly applied in the workplace.
Throughout the apprenticeship learners receive coaching, help and guidance from a dedicated team who are there to ensure they get the most from their work experience.
Successful completion of this apprenticeship gives you an accredited Level 3 Information Communications Technician qualification.
Communications Technician, with training in how to:
Efficiently operate and control your ICT infrastructure – physical or virtual hardware, software, network services and data storage
Use infrastructure management tools to automate the provisioning, testing, deployment and monitoring of infrastructure components
Prioritise systems support tasks and monitor and maintaining system performance
Maintain regulatory, legal and professional standards
Support the information systems needs for your business
Training Outcome:A few examples are:
Level 2 Engineer
Projects Team
Infrastructure Team Site Engineer
Employer Description:Creative Networks UK is a growing managed service provider dedicated to delivering reliable IT solutions and outstanding customer support. We’re looking for an IT Support Apprentice who is passionate about technology, eager to learn, and ready to kickstart a rewarding career in IT.Working Hours :Monday - Friday, 9.00am - 6.00pm, with 1-hour unpaid lunch break.Skills: Communication skills,Attention to detail,Operates well unsupervised,Takes ownership willingly,Remain calm under pressure,Is proactively innovative,Is logical in approach,Customer service skills,Genuine passion for IT,Punctuality,Time management....Read more...
Role: Junior Maintenance Engineer
Location: Outskirts of Maidstone
Hours: Mon-Fri 8 am-4:30 pm (occasional overtime)
Contract Type: Full Time, Permanent
My client, an international leading manufacturing company based near Maidstone, is looking for a Junior Maintenance Engineer to join their team. This is an excellent opportunity for someone looking to develop their career within a supportive environment that provides guidance and development.
As a Junior Maintenance Engineer, you are responsible for ensuring that all site lubrication activities are carried out effectively to support plant reliability and prevent equipment failure. The role involves following and maintaining lubrication schedules, monitoring oil and grease systems, and working closely with the Reliability Engineer to drive preventative maintenance.
Your role will include:
- Being the owner of the lubrication schedule and being required to work to it as closely as is practical to do so, providing feedback for updates and support and recommending any modifications to it as necessary
- To identify and minimise any oil losses, keeping accurate records of what oils are topped up and where
- As well as the lubrications, it is important to ensure clean lubrication systems, including pump sets, pipework, and tanks, to control contamination and aid quick identification of leaks or problems
- Undertake risk assessments (RA) and Safe Systems of Work (SSoW) assessments for engineering work undertaken, and where there is a perceived risk to engineering personnel
- The role requires the competence to lead a team of contractors on planned shutdown days to assist with the completion of the schedules
- To ensure that all automated systems for oil and grease remain topped up with the appropriate lubricant
- To use SAP and other provided reporting tools to report defects, lubrication schedule progress, stock inventory checks and oil consumption records
- Ensure appropriate labelling and documentation control of lubricants used on site. This
includes labelling of tanks, drums, transport containers and relevant COSHH data
The Ideal Candidate:
- Engineering experience is desirable but not essential (training/development offered)
- An understanding of why preventative maintenance and condition-based monitoring are important
- Good communication skills
- Self-motivated
- Team player, but also confident to work individually when necessary
On top of a competitive base salary, you will also receive an enhanced company pension, holiday allowance, and other benefits, including full access to onsite facilities (gym and canteen).
At KHR we take care to ensure that you are represented as well as possible so it is worth checking your CV for layout, spelling and grammar as well as making sure it is up to date before you submit. If you feel you need to highlight particular qualifications, skills or relevant experience with regards to a specific role then please add a cover letter or a preface page. This does not need to be formatted in the same manner. In addition, if your CV is heavy with graphics etc, please could you also submit a "clean" copy in Word. Thank you.
KH Recruitment Ltd is acting as an Employment Agency in relation to this vacancy. KHR - Recruitment Specialists is a trading name of KH Recruitment Ltd Keep in touch with us online for job alerts, industry updates and market...
....Read more...
Production & Process Engineer
Location:Exeter, Devon, UK (On-site)
An opportunity has arisen for a Production & Process Engineer to join a specialist engineering and manufacturing organisation delivering high-performance mechanical systems for defence and specialist industrial applications.
The Exeter based organisation has a long-standing heritage in the design, development and manufacture of complex engineered products, supporting both domestic and international customers across defence and commercial markets. With a strong in-house capability spanning design, fabrication, assembly and testing, the business operates across both proprietary product lines and third-party engineering programmes.
The company has experienced continued growth driven by new product development and defence-related programmes, and is investing in its engineering and manufacturing capability to support future demand.
This role sits at the intersection of design engineering and manufacturing, focused on improving production processes, supporting new product introduction and driving continuous improvement across both internal operations and the wider supply chain.
This position is suited to a hands-on mechanical or production engineer with strong CAD capability and a solid understanding of manufacturing processes, looking to work within a collaborative, workshop-integrated engineering environment.
Main Responsibilities of the Production & Process Engineer (Exeter, Devon, UK):
Design and develop 3D models and detailed engineering drawings using CAD software (SolidWorks or similar)
Create clear and effective production documentation to support manufacturing operations
Review and improve production engineering drawings, implementing design and process enhancements
Support engineering change control processes, including drawing release and revision management
Develop and implement standard operating procedures and work instructions to reduce manufacturing variability
Identify and implement continuous improvement initiatives to increase efficiency and reduce waste
Support new product introduction by defining manufacturing requirements and build processes
Investigate production and process issues, providing technical solutions and support
Create and manage production Bills of Materials (BOMs) and support virtual build reviews
Work closely with engineering, operations, suppliers and customers to resolve technical queries
Source and evaluate components in collaboration with suppliers
Perform basic structural analysis and support simulation activities where required
Support design reviews and incorporate feedback into engineering solutions
Implement production performance metrics and contribute to process optimisation initiatives
Requirements of the Production & Process Engineer (Devon, UK):
HNC, HND or Degree in Mechanical Engineering, Automotive Engineering or a related discipline
Proven experience in an engineering design or production engineering role
Strong 3D CAD skills (SolidWorks preferred) with the ability to produce detailed models and drawings
Experience working within a manufacturing, workshop or production environment
Understanding of engineering drawing control and PDM systems
Knowledge of manufacturing processes including machining, fabrication and assembly
Ability to perform basic engineering calculations and support analysis activities
Strong communication skills with the ability to work cross-functionally with internal teams and suppliers
Good report writing and documentation skills
Strong organisational skills with the ability to manage multiple tasks and meet deadlines
Proactive, hands-on approach with a focus on quality and continuous improvement
Desirable Experience:
Experience with FEA tools (e.G. ANSYS)
Exposure to vehicle systems or mechanical assemblies
Experience with production testing, data logging or instrumentation
Understanding of supply chain and manufacturing process optimisation
Working Pattern & Benefits:
Full-time, on-site role based in Devon, UK
Collaborative engineering environment with close interaction between design and manufacturing teams
Opportunity to work on complex, high-performance engineered products
Involvement in full product lifecycle from concept through to production
Supportive team environment with opportunities for professional development
To apply for this Production & Process Engineer role, please send your CV to Nicola King:
Nking@redlinegroup.Com
01582 878 839....Read more...
An exciting opportunity has arisen for an experienced Lead Systems Engineer to take ownership of large-scale, complex engineering projects within a highly regulated aerospace environment.
This role is ideal for a technically strong engineer who can lead multidisciplinary teams, manage system-level delivery, and drive projects across the full engineering lifecycle. You will play a key role in delivering advanced aerospace systems for global customers, ensuring performance, safety, and compliance at every stage.
Key Responsibilities for the Lead Systems Engineer
- Provide technical leadership across large projects or multiple smaller programmes
- Lead and support Project Engineers, offering guidance and direction
- Plan and manage engineering activities, including resource coordination and management plans
- Engage directly with customers, ensuring solutions meet expectations and requirements
- Lead design reviews and ensure alignment with airworthiness, safety, and regulatory standards
- Identify and manage technical risks and opportunities
- Oversee the full systems engineering lifecycle (requirements, design, integration, verification, validation, and qualification)
- Manage engineering change to maintain system integrity and traceability
- Collaborate with engineering leadership and programme teams to ensure effective resourcing and delivery
- Support continuous improvement and best practice across engineering processes
Skills & Experience required by the Lead Systems Engineer
Essential:
- Significant experience (typically 10+ years) in an engineering role
- Strong understanding of the systems engineering lifecycle and design review processes
- Experience leading projects and providing technical direction to teams
- Excellent communication skills, with the ability to engage both customers and internal stakeholders
- Strong problem-solving skills and a proactive mindset
- Experience in technical report writing and documentation
- Comfortable presenting technical information at all levels
Desirable:
- Degree in a relevant engineering discipline
- Experience with project planning and scheduling
- Previous engineering sign-off authority
- Exposure to aerospace, defence, or other safety-critical environments
- Experience in line management or indirect team leadership
Whats on Offer for the Lead Systems Engineer
- Competitive salary and benefits package
- Opportunity to work on complex, high-impact engineering programmes
- Collaborative and dynamic team environment
- Ongoing learning and development opportunities
- On-site facilities including parking and gym access
- Clear opportunities for career progression and internal mobility
- Strong focus on employee wellbeing, safety, and long-term development
Please note:
This role involves working with ITAR-controlled technology, and successful applicants may be required to undergo additional screening as part of the recruitment process.
TT....Read more...
Lead / Snr AV Installation Engineer - I have a new position for a leading AV Integrator London that specialise in the world of high end residential AV Installation. They are now looking for a true master in the fine art of custom av installation. You will need to have a min of 4 years experience in this specific AV market. The role will see you working on projects in London. The clients offer a good career and relevant AV training to further develop your skills and knowledge. As a lead engineer you will be expected to be a figure on site that can take control of other engineers and trades to make sure the project is delivered on time and on budget. You will have previous experience of the installation / configuration of Crestron and Lutron Lighting control systems. If you have the skills and experiences that fulfil the above then please send me your full CV asap.
AV A/V A-V AUDIOVISUAL AUDIO-VISUAL AUDIO/VISUAL VIDEO BESPOKE CUSTOM INSTALL RACK BUILD CRESTRON DM NVX LUTRON CEDIA AUTOMATION RESIDENTIAL BESPOKE MDUs PROGRAMMING CONFIGURATION HOME NETWORK LONDON SURREY KENT....Read more...
Multi-Skilled Maintenance Engineer
Location: Worksop
Salary: £45,000 – £50,000 + Overtime + Call Out
We’re recruiting for a Multi-Skilled Maintenance Engineer to join a busy manufacturing site in Worksop. This is a Monday–Friday day shift role within an established engineering team supporting production equipment and keeping the plant running efficiently.
The Role
Electrical and mechanical fault finding
Responding to breakdowns and minimising downtime
Planned preventative maintenance (PPM)
Maintaining motors, conveyors, sensors and mechanical components
Working with pneumatic systems and production machinery
About You
NVQ Level 3 in Electrical or Mechanical Engineering
Experience within manufacturing or production environments
Strong fault finding across electrical and mechanical systems
Basic PLC knowledge would be beneficial
What’s On Offer
£45,000 – £50,000 salary
Monday – Friday day shift
Overtime opportunities
Call out rota
• Stable manufacturing....Read more...
The Maintenance Electrician vacancy is working with a market leading Blue Chip Manufacturing firm in the Basildon area. The position offers excellent opportunities for both training and career development and development. Fully automated site working with a market leading manufacturing firm.What’s in it for your as a Maintenance Electrician
Hours of work – Days and Nights 4 on 4 off – 6am to 6pm
Salary – Circa £60,000 per annum (Including Shift Allowance)
Location - Basildon, Essex
Annual KPI Bonus
OT paid at 1.5 and 2x
Completive Pension
Employee Benefits Package
Training and career development opportunities
Main Duties & Responsibilities of Maintenance Electrician include:
Providing plant-wide maintenance service, departmental support and repairs ensuring that all production targets are maintained – maintaining factory manufacturing machinery
Monitor & supply Engineering support of machine set-up & changeovers to ensure that the product conforms to any quality assurance standards and ensuring changeovers are as efficient as possible.
Experience and Qualifications Required for Maintenance Electrician
Recognised Engineering Apprenticeship & Qualification or equivalent, e.g. NVQ, City and Guilds, ONC, BTEC or above – Mechanical or Electrical
High degree of Health & Safety awareness.
Ability to fault find, repair and provide solutions to problems.
The position may suit a Mechanical Maintenance Engineer, Electrical maintenance engineer, maintenance fitter, Maintenance electrician, multi-skilled engineer etc....Read more...
The Maintenance Electrician vacancy is working with a market leading Blue Chip Manufacturing firm in the Basildon area. The position offers excellent opportunities for both training and career development and development. Fully automated site working with a market leading manufacturing firm.What’s in it for your as a Maintenance Electrician
Hours of work – Days and Nights 4 on 4 off – 6am to 6pm
Salary – Circa £60,000 per annum (Including Shift Allowance)
Location - Basildon, Essex
Annual KPI Bonus
OT paid at 1.5 and 2x
Completive Pension
Employee Benefits Package
Training and career development opportunities
Main Duties & Responsibilities of Maintenance Electrician include:
Providing plant-wide maintenance service, departmental support and repairs ensuring that all production targets are maintained – maintaining factory manufacturing machinery
Monitor & supply Engineering support of machine set-up & changeovers to ensure that the product conforms to any quality assurance standards and ensuring changeovers are as efficient as possible.
Experience and Qualifications Required for Maintenance Electrician
Recognised Engineering Apprenticeship & Qualification or equivalent, e.g. NVQ, City and Guilds, ONC, BTEC or above – Mechanical or Electrical
High degree of Health & Safety awareness.
Ability to fault find, repair and provide solutions to problems.
The position may suit a Mechanical Maintenance Engineer, Electrical maintenance engineer, maintenance fitter, Maintenance electrician, multi-skilled engineer etc....Read more...
