Mechanical Maintenance Engineer - FM Service Provider - Hospital - Cambridge - £44,500 Per annum Exciting opportunity to work for an established FM service provider situated in Cambridge. My client is looking for a Mechanical Maintenance Engineer to be based in a hospital in Cambridge. The successful candidate will be mechanically qualified / biased (C&G or NVQ) with a proven track record in commercial building maintenance. In return the company are offering a competitive salary, overtime and the chance to work at this very unique and interesting site. Working with the maintenance team on site. He or she will be required to carry out mechanical and fabric maintenance to the following;Monitor mechanical plantPumps, Motors, Seals, BearingsAir Conditioning - Air Handling Units / Fan Coil Unit (Filter changes, cleaning)Water Treatment (Temperature checks / Not dosing)Plumbing - Unblocking toilets, replacing taps, washers etcMonitor the BMS systemsBasic electrical duties (Lamp changes etc)General building fabricEscort specialist sub contractors Hours of workMonday to Friday earlies and lates, 07.00 - 15.00, 14.00 - 22.00 Overtime available RequirementsMechanical qualifications - NVQ or City & GuildsYou must be able to provide copies of your trade certificatesA proven track record in commercial building maintenanceMulti-skilledGood communication skillsAble to gain Enhanced DBS Highly desirable (Not essential) Any further qualifications (i.e. Electrical or Air Conditioning etc)Experience working in a hospitalWater treatment (L8)Current or Expired Enhanced DB....Read more...
Mobile Maintenance Engineer - FM Service Provider - Mobile (West & Central London) - Up to £44,000 Are you a Mobile Engineer looking for a new challenge? Do you want to be mobile in West & Central London? Exciting opportunity to work for a family run FM service provider situated in London & M25. CBW are currently looking for an Electrical / Mechanical Maintenance Engineer to cover in the region of circa 10-15 commercial buildings located in West & Central London. The successful candidates will be electrically biased (C&G / NVQ) with a proven track record in commercial building maintenance. This is Mobile position and will require the successful candidates to attend a number of sites where he or she will be required to carry out PPM/Reactive maintenance to electrical and mechanical plant with particular emphasis on electrical & mechanical maintenance across High End residential estates and commercial offices. In return the company is offering a competitive salary paying up to £44,000 per annum based on experience/qualifications, overtime and further training. The ideal candidate will live in West Side of London due to the location of the sites. Key duties & ResponsibilitiesWeekly Fire Alarm Tests and logWeekly AOV test and LogL8 water hygiene monitoringFan Coil Unit servicingHIU/CIU servicing (Training will be given)AHU servicingMVHR servicingWeekly/Monthly Generator test and logWeekly CHP Checks and logMonthly Car Park smoke ventilation test and logMonthly/Annual Emergency Lighting test and logSupervision of Sub ContractorsAssist with preparation of Quotations for remedial works.Be available for duty call out cover, on a Rota basis (currently 1 in 8)Hours of workMonday to Friday - Hours: 08:00am to 17:00pmRequirementsCity & Guilds / NVQ in Electrical Installation / Engineering You must be able to provide copies of your trade certificates (Essential)A proven track record in commercial building maintenanceAn understanding of commercial building maintenanceMulti-skilledGood communication skillsExcellent customer service skillsPackageUp to £44,000 (Based on experience / Qualifications)Company Vehicle with Fuel card and FloatCall out 1 in 8 PDA's23 days holiday + BHOvertime availableTraining and development opportunitiesContributory pension scheme....Read more...
Site based HVAC Engineer - Leeds - National Facilities Management Organisation: Commercial Real Estate & RetailCBW Staffing Solutions are seeking a skilled HVAC Engineer to join our client’s team of facilities management professionals. The ideal candidate will have a strong background in HVAC maintenance and repair, responsible for maintaining and servicing air conditioning systems and other mechanical systems on site to ensure optimal performance and end-client satisfaction.This is a permanent and full-time position, static based in Leeds City Centre.Package:Competitive salary between £43,000 - £45,000 per annum (depending on experience)Core hours are 8:00am - 5:00pm, Monday - Friday (40 hours per week)Participation in ‘out of hours’ on call rota25 days annual leave plus bank holidaysGenerous workplace pension schemeTraining, development & progression opportunitiesResponsibilities:Perform routine maintenance, inspections, and repairs on mechanical systems, including HVAC, pump systems, air compressors, water chillers, plumbing, boilers, and other related equipmentDiagnose and troubleshoot mechanical issues, implementing effective solutions to minimise downtimeConduct preventative maintenance tasks to ensure equipment reliability and longevityMaintain accurate records of all maintenance activities, including work orders, inspections, and repairsEnsure compliance with safety regulations and industry standardsAssist in the procurement of necessary parts and supplies for maintenance tasksProvide technical support and guidance to junior maintenance staff as neededRespond promptly to emergency maintenance requests and provide timely resolutionsQualifications:Qualified to NVQ Level 2-3 in any Mechanical discipline e.g. Heating and Ventilating or City and GuildsConversant with Mechanical Plant/Plumbing related Building Services, Air Handling Unit’s, Building Management Systems, Cold Water Systems, Heating and Ventilation Systems, Water Treatment and Emergency GeneratorsHold your F-Gas Cat 1 Regulations certification (desired but not essential)Full UK driving licenceIf you are a dedicated HVAC Engineer, looking for a rewarding career opportunity, please apply with your full CV or contact Aaron Rutter at CBW Staffing Solutions.''....Read more...
Air Conditioning / HVAC Maintenance Engineer - FM Service Provider - Foot Mobile / London Portfolio (Zones 1&2) - Up to £52,000Exciting opportunity to work for a family run FM service provider situated in London. CBW are currently looking for a Air Conditioning / HVAC Engineers to cover in the region of circa 60 commercial buildings located in London (Zones 1&2). The successful candidates will be mechanically / HVAC biased (C&G / NVQ) with a proven track record in commercial building maintenance. This is a Foot Mobile position and will require the successful candidates to attend a number of sites where he or she will be required to carry out PPM/Reactive maintenance to mechanical plant with particular emphasis on AHU/FCU maintenance. In return the company is offering a competitive salary paying up to £52,000 per annum based on experience/qualifications, overtime and further training.Key duties & ResponsibilitiesCarry out PPM & Reactive maintenance on Pumps, Motors, Seals, Bearings and compressorsAir Conditioning - Air Handling Units / Fan Coil Unit (Filter changes, cleaning)Chillers - Re-setBMS System - Monitor (i.e. Hot & Colds etc)Ensuring log books are kept up to dateEscorting specialist sub contractorsAssisting other engineersOffering technical supportThis is an M&E contract, so therefore there will be very little plumbing and fabric workHours of workMonday to Friday - 08:00am to 17:00pmRequirementsCity & Guilds / NVQ in Mechanical or Air ConditioningF-Gas Cat 1 - (Essential)You must be able to provide copies of your trade certificates (Essential)A proven track record in commercial building maintenanceAn understanding of critical plant: Chillers, HVAC, AHU, FCU's etcMulti-skilledGood communication skillsExcellent customer service skillsYou must be happy to work on a "Foot Mobile" basis and attend multiple sites (i.e. This is not a mobile role where a vehicle is provided)PackageUp to £52,000 (Based on experience / Qualifications)Zones 1&2 Travel cardPDA's20 days holiday + BHOvertime availableTraining and development opportunitiesContributory pension schemePlease send your CV to Charlie Long at Cbw Staffing Solutions for more information....Read more...
Mechanical Shift Engineer - 4 on 4 off (Days & Nights) – Commercial building – Wembley - £48,000 Per annumMy client is looking for a Mechanical Shift Maintenance Engineer to be based in a commercial building In Wembley. The successful candidates will be Mechanically biased (C&G / NVQ) with a proven track record in commercial building maintenance. Working with the maintenance team on site (Team of 3), He or she will be required to carry out electrical, mechanical and fabric maintenance to the following. In return, the company are offering a competitive salary of £48,000, further training and career progression. Key duties & ResponsibilitiesMonitor mechanical plantPumps, Motors, Seals, BearingsAir Conditioning - Air Handling Units / Fan Coil Unit (Filter changes, cleaning)Water Treatment (Temperature checks / Not dosing)Plumbing - Unblocking toilets, replacing taps, washers etcMonitor the BMS systemsBasic electrical duties (Lamp changes etc)General building fabricEscort specialist sub contractorsHours of work4 on 4 off, Shift Pattern, Days only07:00 am-19:00 pm / 19:00 pm -07:00 am Package£48,000 Basic SalaryUniform and Tools ProvidedCycle to work scheme22 days holidayOvertime AvailableA lot of progression availableAnnual pay reviewRequirementsMechanically qualified level 2&3 (C&G, NVQ etc)Experience working in a large commercial buildingYou must be able to provide copies of your trade certificates (Essential)A proven track record in commercial building maintenanceMulti-skilledGood communication skillsExcellent customer skills Must be able to get to site for 07:00am startIf you are interested please get in contact with Alex Denton of CBW Staffing solutions''....Read more...
Junior Shift Engineer – Continental Shift – Commercial Building – Kings Cross, London – £35,000 Per annum Are you looking for a way into maintenance?Are you looking for a role in Central London?Are you electrically or mechanically qualified?If the answer is yes, then read on.... My client is looking for an Electrical or Mechanical Shift Engineer to be based in a commercial building in Kings Cross, London. A successful candidate will be electrically or mechanically biased (C&G / NVQ). Working with the maintenance team on site, He or she will be required to carry out electrical, and mechanical maintenance. In return, the company offers a competitive salary of £35,000, further training and career progression. Package£35,000 per annumUniform and Tools ProvidedCycle to work scheme20 days holidayOvertime AvailablePensionInternal Progression & DevelopmentHours of workContinental Shift - 4 nights, 4off, 3 days, 3 nights, 6off, 4 days - 07:00am - 19:00pm / 19:00am - 07:00am Key Duties & ResponsibilitiesLighting (Small installation, Fault-finding, Lamping, etc)Emergency lighting tests & Fire alarm tests Plant room maintenanceAir Handling Units / Fan Coil Unit (Filter changes, cleaning)Control PanelsChanging BallastBMS System - Monitor (i.e. Hot & cold)Carry out all aspects of M&E/Fabric maintenanceMaintain and update Log booksPlumbing - Unblocking toiletsPumps, motorsRequirementsElectrically qualified - City & Guilds Level 3 or mechanically City & Guilds Level 2Have a hard-working attitudeWillingness to learnMust be able to provide copies of your trade certificatesA proven track record in commercial building maintenanceGood communication skillsClient FacingIf you are interested please get in contact with Ben Miller of CBW Staffing solutions!....Read more...
Mobile Maintenance Engineer - FM Service Provider - Mobile (West & Central London) - Up to £43,000 Are you a Mobile Engineer looking for a new challenge? Do you want to be mobile in West & Central London? Exciting opportunity to work for a family run FM service provider situated in London & M25. CBW are currently looking for an Electrical / Mechanical Maintenance Engineer to cover in the region of circa 10-15 commercial buildings located in West & Central London. The successful candidates will be electrically biased (C&G / NVQ) with a proven track record in commercial building maintenance. This is Mobile position and will require the successful candidates to attend a number of sites where he or she will be required to carry out PPM/Reactive maintenance to electrical and mechanical plant with particular emphasis on electrical & mechanical maintenance across High End residential estates and commercial offices. In return the company is offering a competitive salary paying up to £43,000 per annum based on experience/qualifications, overtime and further training. The ideal candidate will live in West Side of London due to the location of the sites. Key duties & ResponsibilitiesWeekly Fire Alarm Tests and logWeekly AOV test and LogL8 water hygiene monitoringFan Coil Unit servicingHIU/CIU servicing (Training will be given)AHU servicingMVHR servicingWeekly/Monthly Generator test and logWeekly CHP Checks and logMonthly Car Park smoke ventilation test and logMonthly/Annual Emergency Lighting test and logSupervision of Sub ContractorsAssist with preparation of Quotations for remedial works.Be available for duty call out cover, on a Rota basis (currently 1 in 8)Hours of workMonday to Friday - Hours: 08:00am to 17:00pmRequirementsCity & Guilds / NVQ in Electrical Installation / Engineering You must be able to provide copies of your trade certificates (Essential)A proven track record in commercial building maintenanceAn understanding of commercial building maintenanceMulti-skilledGood communication skillsExcellent customer service skillsPackageUp to £43,000 (Based on experience / Qualifications)Company Vehicle with Fuel card and FloatCall out 1 in 8 PDA's23 days holiday + BHOvertime availableTraining and development opportunitiesContributory pension schemePlease send your CV to Dan Barber at Cbw Staffing Solutions for more information''....Read more...
Junior Maintenance Engineer (Electrical or Mechanical) - FM Service Provider - Commercial Building - City of London- £37,000 - £40,000Are you looking for a way into maintenance?Are you looking for a role in Central London?Are you electrically or mechanically qualified?If the answer is yes, then read on....An exciting opportunity to join an established building services company based in London has arisen! CBW Staffing Solutions are currently recruiting a Junior Maintenance Engineer either of an electrical, mechanical, or plumbing background, to be based in a commercial building in the City of London. He or she or they will be required to carry out planned and reactive building maintenance alongside the maintenance team on site. This person will be working closely with a senior member of the team and the team on-site to gain experience and training of building services.The successful candidate will understand Facilities Maintenance and have some experience in building maintenance. In return, the company is offering a competitive salary of up to £40,000, overtime, plenty of further training and a potential route into further career progression. Hours of workMonday to Friday – 08:00 am to 17:00 pm25 days holiday + Bank holidaysOvertime availableFurther trainingCompany pensionKey Duties & ResponsibilitiesLighting (Small installation, Fault-finding, Lamping, etc)Emergency lighting tests & Fire alarm tests Plant room maintenanceAir Handling Units / Fan Coil Unit (Filter changes, cleaning)Control PanelsChanging BallastBMS System - Monitor (i.e. Hot & cold)Carry out all aspects of M&E/Fabric maintenanceMaintain and update Log booksPlumbing - Unblocking toiletsPumps, motorsRequirementsElectrically qualified - City & Guilds Level 3 or mechanically City & Guilds Level 2Must be able to provide copies of your trade certificatesA proven track record in commercial building maintenanceHard working attitudeGood communication skillsClient FacingIf you are interested please email your CV to Alex Denton of CBW Staffing Solutions''....Read more...
Electrical Maintenance Engineer - Glasgow - Salary up to £36,000 DOE We are looking for a skilled Electrical Maintenance Engineer to join our team. The successful candidate will possess strong electrical maintenance knowledge and have completed a recognised apprenticeship. The role focuses on maintaining the safe and continuous operation of electrical supplies, building systems, plant, and equipment. This role is split over 2 sites over 40 hours per week split into 3 days and 2 days. Due to this, a van and fuel card will be provided. Key Responsibilities:Perform both planned and reactive electrical maintenance tasks, ensuring timely resolution of issues to avoid contractual penalties.Create Method Statements and Risk Assessments for issuing Permits-to-Work.Perform tasks such as electrical system maintenance, emergency lighting checks, fire alarm tests, water and medical gas system upkeep, and pressure system maintenance.Complete all necessary reports, test certificates, and Task Assessment sheets both electronically and in hard copy.Work collaboratively with the Facilities Team Leader, assisting with equipment failures and organising the supply of goods/services as required.Participate in overtime work and an on-call rota to support maintenance activities.Travel to other sites as needed and liaise professionally with clients.Person Specification:Completed a recognised electrical apprenticeship with proven experience in electrical maintenance.Competency in building service systems, with a solid understanding of equipment operation.Experience in hospital maintenance is desirable but not essential.Knowledge of relevant safety regulations, including Scottish Health Technical Memoranda (SHTM), is desirable.First Aid and CPR training within the last three years, or willingness to undergo training.Due to the nature of the contract successful candidate must be able to obtain a Basic Disclosure Scotland certificate.Salary & Benefits:Salary up to £36,00024 days annual leave (+ public holidays)Life Cover equivalent to 1.5 times annual salaryEmployee discount shopping schemes on major brands and retailersGym membership discountsHoliday purchase scheme2 corporate social responsibility days per yearBroad range of learning opportunities, such as professional qualifications, collective/individual training, and personalized support programmes ....Read more...
The Engineering Supervisor vacancy is working at a market leading FMCG Manufacturing firm. It is working with a market-leading manufacturing group at a world class facility. This opportunity offers fantastic company benefits such as competitive pension, premium overtime available, plus extensive accredited OEM training and personal development opportunities, with a route through to Engineering Management group roles.The business truly values its employees which is reflected in the generous package and site facilities. This is an exciting time to join the business with the multi-million CAPEX due to complete soon, which bring industry-leading production and operational facilities.What’s in it for you as Engineering Supervisor:
Salary circa £65,000
Production bonus
Location - Stanford-le-Hope
Competitive pension
Hours of work – 4 on 4 off shift pattern
Employee benefits program
Genuine career progression into group roles
OEM Training and career development, including health and safety training, management training (ILM) & IOSH, cross-skilling and upskilling
The ability to work within a skilled team of engineers permanently
Key responsibilities of Engineering Supervisor
The leadership of Engineering teams, covering both automated and semi-automated parts of the plant
International Management Skills, The development and promotion of lean manufacturing techniques,
To identify opportunities to further automate manufacturing processes
To develop multi-functional / flexible manufacturing teams across operations
Implement and push Engineering KPIs across the site
Experience and Qualifications Required for Engineering Supervisor
Engineering qualified; City & Guilds, ONC, BTEC Level 3, NVQ Level 3, Apprenticeship or equivalent in Electrical or Mechanical Maintenance
Previous experience as an Engineering Team Leader, Maintenance Supervisor, Engineering Manager, Maintenance Manager, Engineering Planner Lead Engineer etc
Strong Health and Safety awareness
Previous experience of undertaking maintenance within a manufacturing environment
Previous experience of the development and application of PPM activities
This position would suit, Engineering Team Leader, Engineering Supervisor, Engineering Manager, Maintenance Engineer, Maintenance Manager....Read more...
Electrical or Mechanical Engineer - Borehamwood, Hertfordshire - Up to £24.00 per hour - Immediate Start - Temp to perm Are you an experienced Mechanical or Electrical Engineer? If so, read on...... My client is looking for an Electrical or Mechanical Maintenance Engineer to be based in Borehamwood within a commercial building. The successful candidates will be Electrical or Mechanical biased with a proven track record in commercial building maintenance, working with the maintenance team on site. Key duties depending on experience: Electrical duties:Lighting – lamp changes, ballast changes, simmtronic/Phillips lightingEmergency light testingPower distributionElectrical fault-findingSmall works – new sockets, new lights, new circuitsPAT TestingControl Panel maintenanceTransformersStar Delta StartersMechanical duties:Fire alarm testing and sprinkler testingAHU's/FCU's – filter changes, belt changes, actuator changes, coil cleansPumps – PPM's or strip downs (replacing seals, bearings, valves, overhauls)Motors – PPM's (re-winds, overhauls)Water treatment – dipslides, pH & temperature testing, chlorination, chemical dosingWater pressurization unitsChlorifiers – annual inspection, descalingSteam PlantCondensers, Condenser ReturnsCooling towersSoftenersHumidifiersHydraulicsPneumaticsBoilers – re-setsChillers – re-sets, 1st Line faultsPlumbing (Unblocking toilets, changing taps etc)HIU'sHours of workTemporary to permanentMonday - Friday08:00am - 17:00pmUp to £24 per hour Free Parking on site Electrical requirements:Electrical qualified level 2&3 (C&G, NVQ etc)18th EditionExperience working in a bank / commercial OfficeYou must be able to provide copies of your trade certificates (Essential)A proven track record in commercial building maintenanceMulti-skilledGood communication skillsExcellent customer skillsMust have experience with Cooling Towers Mechanical requirements:City & Guilds / NVQ in MechanicalYou must be able to provide copies of your trade certificates (Essential)A proven track record in commercial building maintenanceAn understanding of the following is essential: L8 Water treatment, Pumps, Air Handling unitsMulti-skilledGood communication skillsExcellent customer skillsMust have experience with Cooling Towers If you are interested, please send a copy of your CV to Katie at CBW Staffing Solutions for more information.....Read more...
Commercial gas/Building services engineerBirmingham
Package: Up to £44,000 / travel -30 mins/ no on call/ 25 days +8 BH/ private medical insurance / Life insurance x 4 annual salary/ pension/
If you would like to discuss this opportunity in more detail, please call #Chantal at CV BAY on 01216511865
We are specialists in commercial building maintenance predominantly across air conditioning, electrical, drainage and commercial gas. We have many years experience as a business and we provide services for organisations across hotels, offices, universities, schools and colleges, fire and rescue, government buildings, warehouses, retail and more.
You will be responsible for
Service and repair of commercial gas plant
Electrics including emergency lighting, fire alarm systems, rewires, installation and maintenance (general building services work )
Qualifications:
Commercial gas qualifications COCN1/CORT1/CIGA1/CDGA/ TPCP1
18th edition is advantageous
Package
Basic salary up to £44K
40 hours per week (mon – Fri)
travel – 30 mins
NO CALL OUT ROTA
25 days + 8 bank holidays
Overtime available
Company Vehicle & fuel card
Mobile phone
Company uniform
Pension
Private medical insurance
Life insurance x4 basic salary
If you would like to discuss this opportunity in more detail, please call #Chantal at CV BAY on 01216511865....Read more...
Mobile Maintenance Engineer - FM Service Provider - Mobile (West London and Central London) - Up to £43,000 Are you a Mobile Engineer looking for a new challenge? Do you want to be mobile in London? Exciting opportunity to work for a family run FM service provider situated in West London and Central London. CBW are currently looking for 2 x Electrical / Mechanical Maintenance Engineers to cover in the region of circa 10-15 commercial buildings located in West and Central London The successful candidates will be electrically biased (C&G / NVQ) with a proven track record in commercial building maintenance. This is Mobile position and will require the successful candidates to attend a number of sites where he or she will be required to carry out PPM/Reactive maintenance to electrical and mechanical plant with particular emphasis on electrical & mechanical maintenance. In return the company is offering a competitive salary paying up to £43,000 per annum based on experience/qualifications, overtime and further training. Key duties & ResponsibilitiesWeekly Fire Alarm Tests and logWeekly AOV test and LogL8 water hygiene monitoringFan Coil Unit servicingHIU/CIU servicing (Training will be given)AHU servicingMVHR servicingWeekly/Monthly Generator test and logWeekly CHP Checks and logMonthly Car Park smoke ventilation test and logMonthly/Annual Emergency Lighting test and logSupervision of Sub ContractorsAssist with preparation of Quotations for remedial works.Be available for duty call out cover, on a Rota basis (currently 1 in 8)Hours of workMonday to Friday - Hours: 08:00am to 17:00pmRequirementsCity & Guilds / NVQ in Electrical Installation / Engineering You must be able to provide copies of your trade certificates (Essential)A proven track record in commercial building maintenanceAn understanding of commercial building maintenanceMulti-skilledGood communication skillsExcellent customer service skillsPackageUp to £43,000 (Based on experience / Qualifications)Company Vehicle with Fuel card and FloatCall out 1 in 8 PDA's23 days holiday + BHOvertime availableTraining and development opportunitiesContributory pension schemePlease send your CV to Charlie Long at Cbw Staffing Solutions for more information''....Read more...
Mobile Maintenance Engineer - FM Service Provider - Mobile (London & M25) - Up to £45,000 Are you a Mobile Engineer looking for a new challenge? Do you want to be mobile in London? Exciting opportunity to work for a family run FM service provider situated in London & M25. CBW are currently looking for 2 x Electrical / Mechanical Maintenance Engineers to cover in the region of circa 10-15 commercial buildings located in London & M25. The successful candidates will be electrically biased (C&G / NVQ) with a proven track record in commercial building maintenance. This is Mobile position and will require the successful candidates to attend a number of sites where he or she will be required to carry out PPM/Reactive maintenance to electrical and mechanical plant with particular emphasis on electrical & mechanical maintenance. In return the company is offering a competitive salary paying up to £45,000 per annum based on experience/qualifications, overtime and further training. Key duties & ResponsibilitiesWeekly Fire Alarm Tests and logWeekly AOV test and LogL8 water hygiene monitoringFan Coil Unit servicingHIU/CIU servicing (Training will be given)AHU servicingMVHR servicingWeekly/Monthly Generator test and logWeekly CHP Checks and logMonthly Car Park smoke ventilation test and logMonthly/Annual Emergency Lighting test and logSupervision of Sub ContractorsAssist with preparation of Quotations for remedial works.Be available for duty call out cover, on a Rota basis (currently 1 in 8)Hours of workMonday to Friday - Hours: 08:00am to 17:00pmRequirementsCity & Guilds / NVQ in Electrical Installation / Engineering You must be able to provide copies of your trade certificates (Essential)A proven track record in commercial building maintenanceAn understanding of commercial building maintenanceMulti-skilledGood communication skillsExcellent customer service skillsPackageUp to £45,000 (Based on experience / Qualifications)Company Vehicle with Fuel card and FloatCall out 1 in 8 PDA's23 days holiday + BHOvertime availableTraining and development opportunitiesContributory pension schemePlease send your CV to Dan Barber at Cbw Staffing Solutions for more information....Read more...
Mobile Air Conditioning Engineer - Kent - £40,000 - £42,000 An Exciting role to join a growing maintenance provider who is looking to expand their operation and bring in specialised Commercial Air Conditioning engineers to supply this service to the existing portfolio of clients in Kent.You will be joining their current mobile maintenance team and covering the Kent area on a range of commercial contracts. You will be responsible for all commercial Air conditioning maintenance and general building services and will be working Monday - Friday 8am - 5 pm.RequirementsNVQ Level 2 Refrigeration & Air conditioning (Desirable)NVQ Level 3 Refrigeration & Air conditioning (Desirable)Fgas 2079 Cat 1 (Essential)Good Air conditioning maintenance knowledgeExtensive experience working within commercial environmentsBuilding services knowledge with ideally electrical qualifications but not essential.Full Drivers LicenceBenefitsBasic Salary of up to £42,000Monday Friday 08.00 am - 17.00 pm25 days holiday + Bank HolidaysPension30 minutes travel each wayOT after 40 hours at 1.5xOn-call 1 in 4Company Vehicle + Fuel Card - Private Use OptionalResponsibilitiesPPM & Reactive maintenanceAir conditioning and refrigeration - Service / maintenanceYour main duties will be service and maintenance on split systems, VRV's, VAV's and VRF's, AHU's, FCU's, Chillers and all HVAC and refrigeration plant.Electrical Knowledge would be beneficial.Extensive building services knowledgeTo avoid missing out on this opportunity please send your CV to Archie Reed of CBW Staffing Solutions. ....Read more...
Our client is a leading engineering business that has been established for over half a century providing mechanical handling solutions to many industries across the globe.They are looking to strengthen their projects & design team by recruiting an additional Applications Engineer to their successful team on a permanent basis.If you have previous design (3D), applications and or project experience within materials handling equipment (conveyors) or sheet metal industry experience and are looking to join a highly stable company who can offer a competitive salary then apply now for immediate consideration.Applications Engineer• Design plant layouts and engineering solutions for the Sales department using 3D software (SolidWorks) and 2D software;• Learn about and use 3D software and related applications in order to improve the clarity and appeal of our Sales designs;• Offer all reasonable design and technical support to the Sales, Marketing, Engineering, Projects and R&D departments within the Company when needed.Applications Engineer – Sales and Marketing Duties• Create 3D layouts of company equipment for sales projects.• Ensure our Sales designs and layouts are visually appealing, occupy a minimum footprint, follow the Company’s design rules, and offer a clear concept to our customers.• Pick up a Sales enquiry and devise what is needed for the 3D layout. (This can follow with time but we need to reduce the current bottleneck of Sales people having to coordinate all tasks on a project.• The Applications Engineer should, with time, be able to understand an incoming enquiry and begin the technical tasks, particularly the drawing work, without waiting for instruction from others).• In time, work alone to configure equipment and systems and set these out in 3D for the Sales department.• Create a library of 3D, plug-and-play Sales models for all company products. These models are to be compatible with our end-product designs so that our Sales layouts contain accurate sizings and flows but are fast to create.• Create low-res shells of the Engineering modules making up our standard products. These shells are to be accurate for use by both the Sales and the Engineering department in General Arrangement drawings.• Produce designs and 3D views for the Company’s Marketing tools and OMIs.• Follow the latest developments in 3D software, and in our sector, and use this knowledge in the Company’s design output to improve the Company’s strike-rate in sales.This includes:• Animating designs to show materials flowing over the system, access areas and maintenance tasks for operators, flybys and 360-degree views, all in minimised file sizes• Linking our 3D designs to laser site scans to show new 3D designs in existing site locations• Producing First Person walkthroughs for the customer to control• Creating a configurator of 3D blocks on our website to allow users to build up a Sales layout with our products for the Company to quote• Linking 3D layout software to our project programmes in MS Project to show site build phases in 3D against the runtime of the programme in MS Project• Find other such combinations and possibilities to make our Sales designs inspiring to our customers, stakeholders, suppliers and those following us in the media.• Create a database of all customer sites and list what company equipment is in use there with latest drawings and photos.• Produce attractive flow diagrams to show in simple form what the 3D design is doing with the materials it is processing (in MS Visio or similar).• Create mass balances of materials flowing and dividing over the 3D layout (this is a rare requirement, but it would be very handy).• Provide monthly reports detailing statistical information relating to sales, if required.• Attend site as and when necessitated by the circumstances of a particular project.• Assist members of the Sales team during tender submissions.• Benchmark competitor marketing activity/techniques, as well as those used outside our sector to maximise the effectiveness of our Sales design output.Applications Engineer – General Engineering Duties• Carry out engineering work for the Projects department in the form of Project Engineering tasks and/or detailed design to help release work to the factory, if needed.• Take time to understand the design-to-manufacture process in order to suggest improvements based on your experience e.g. automated BOM creation from SolidWorks.• Help write and develop company Design Rules• Help create a Library of Machines containing all the pertinent information we collectively hold about every product integrated in our layouts.• Work on the development of any standard or non-standard machines and applications.• Work on the Company’s ongoing Product Standardisation programme and its improvements programme.• Produce drawings for new products and to offer input on any R&D project occurring within the Company.Applications Engineer previous suitable job titles: Design Engineer, Project Engineer, Project Design Engineer, 3D CAD Technician, 3D Design Technician, 3d Design Engineer, Draughtsperson, Mechanical Design Engineer, Mechanical Design Technician, Proposal Engineer
Commutable from: Kettering, Market Harborough, Leicester, Wellingborough, Corby, Northampton etc...Please apply ASAPDue to current high volumes of applications to our advertised jobs, we are unable to respond to every application. All successful candidates will be contacted as soon as possible.....Read more...
Mobile Refrigeration Engineer - Yorkshire - Up to £48,000 - National Facilities Management Organisation: Industrial CBW Staffing Solutions are recruiting for an exciting role to join a growing maintenance provider who is looking to expand their operation due to the acquisition of a contract and bring in a specialised Refrigeration Engineer to supply this service to the existing portfolio of clients within the commercial/industrial sector. You will be joining their current mobile maintenance team and covering a range of contracts in Yorkshire. PackageCompetitive salary between £45,000 - £48,000 per annum (depending on experience)Van & fuel card suppliedCore hours are Monday - Friday (40 hours per week)Participation in an ‘out of hours’ on call rota - standby rate is £15 per day and £50 on bank holidays, overtime x1.5 on weekdays & x2 on weekends & days in lieu on bank holidays25 days annual leave plus bank holidays - ability to buy 5 days & sell 2 days holidayGenerous workplace pension schemeCompany funded health cash plan and life assuranceEmployee Assistance Program (EAP)Cycle to work schemePurchase an electric vehicle via salary sacrificeEmployee discounts with various brandsLearning and development programs, training and career opportunitiesResponsibilitiesPlanned Preventative Maintenance (PPM) & Reactive MaintenancePerform service and maintenance of refrigeration systems, including but not limited to: Reciprocating, Scroll, and Screw Compressor Packs including Ammonia, CO2, and HFC/HFO InstallationsProactively manage and execute engineering tasks for food factories, regional distribution centres (RDCs), and warehouses.Handle service visits and reactive breakdown cover during standard working hoursProvide out-of-hours support as part of an on-call rotaApply in-depth knowledge of industrial refrigeration systems and customer expectations within the sectorQualificationsNVQ Level 2 Refrigeration & Air conditioning (minimum)F-Gas 2079 Cat 1 (essential)Successfully completed a recognised training course/apprenticeship in Industrial RefrigerationA good base knowledge of maintenance & service duties on medium to large industrial applicationsExperience of large central plant technical diagnosis and fault-finding skills for various installations. Likewise experience on refrigeration compressors Grasso, Sabroe, J&E Hall, GEA, Mycom etcFull UK driving licenceInterested? Apply with a full and up to date CV or contact Aaron Rutter at CBW Staffing Solutions.''....Read more...
Mechanical Day Shift Engineer – FM Service Provider – Law Firm – Farringdon, London - £45,000CBW is currently recruiting for a Mechanical Day Shift Engineer to cover a Law Firm in Farringdon, London. The successful candidate will be qualified Mechanically and will have a proven track record in commercial building maintenance. Working with the maintenance team on site (Team of 2) He or she will be required to carry out mechanical and fabric maintenance to the following. In return, the company is paying a competitive salary of £45,000, further training and career progression. Hours of Work & Package Information 4 on 4 off - 07:00 am to 19:00 pm£45,000 per annumLots of overtime available20 Days holiday Uniform and Tools ProvidedCycle to work schemeOvertime AvailableA lot of progression availableAnnual pay review Key Duties & ResponsibilitiesMonitor mechanical plantPumps, Motors, Seals, BearingsAir Conditioning - Air Handling Units / Fan Coil Unit (Filter changes, cleaning)Water Treatment (Temperature checks / Not dosing)Plumbing - Unblocking toilets, replacing taps, washers etcMonitor the BMS systemsBasic electrical duties (Lamp changes etc)General building fabricEscort specialist sub contractorsUndertake all allocated tasks and perform them in a timely and professional manner.Be proactive in identifying and reporting faults with building services equipment and take steps to resolve them.Be proactive to ensure all H&S issues are reported/escalated as required.Maintain informal communications with Client staff members related to service levels and issues.Report service affecting issued to the site management team for formal communication with the client.Remain flexible with regard to site attendance and tasks undertaken within personal competency.Be fully aware of relevant Health and Safety and general legislative matters.Escort specialist subcontractorsRequirementsMechanically qualified level 2 (C&G, NVQ etc) minimumYou must be able to provide copies of your trade certificates (Essential)A proven track record in commercial building maintenanceMulti-skilledGood communication skillsExcellent customer skills Must be able to get to site for 07:00am startPlease send your CV today to Alex Denton of CBW Staffing Solutions to avoid missing out on this role.....Read more...
Shift Engineer – Continental Shift – Commercial Building – St Pauls, London – £53,000 Per annumMy client is looking for an Electrical or Mechanical Shift Engineer to be based in a commercial building in St Pauls, London. A successful candidate will be electrically or mechanically biased (C&G / NVQ). Working with the project team on site, He or she will be required to carry out electrical, and mechanical maintenance. In return, the company offers a competitive salary of £53,000, further training and career progression. Package£53,000 per annumUniform and Tools ProvidedCycle to work scheme22 days holidayOvertime AvailablePensionInternal Progression & DevelopmentHours of workContinental Shift - 4 nights, 4off, 3 days, 3 nights, 6off, 4 days - 07:00am - 19:00pm / 19:00am - 07:00am Key Duties & ResponsibilitiesLighting (Small installation, Fault-finding, Lamping, Changing ballast's, Control panel, Power distribution)Emergency lightingAir Conditioning - Air Handling Units / Fan Coil Unit (Filter changes, cleaning)Chillers - Re-setWater Treatment (Temperature checks / Not dosing)Monitor mechanical plantPlumbing - Unblocking toiletsPumps, motorsWater TreatmentBMS System - Monitor (i.e. Hot & Colds)Undertake all allocated tasks and perform them in a timely and professional manner.Be proactive in identifying and reporting faults with building services equipment and take steps to resolve them.Be proactive to ensure all H&S issues are reported/escalated as required.Maintain informal communications with Client staff members related to service levels and issues.Report service affecting issued to the site management team for formal communication with the client.Remain flexible with regard to site attendance and tasks undertaken within personal competency.Be fully aware of relevant Health and Safety and general legislative matters.Escort specialist subcontractorsRequirementsElectrically qualified level 3 or Mechanically qualified level 2(C&G, NVQ etc)18th edition (If electrically qualified)Experience working in a large commercial buildingYou must be able to provide copies of your trade certificates (Essential)A proven track record in commercial building maintenanceMulti-skilledGood communication skillsExcellent customer skillsMust be able to get to the site for 07:00 am startIf you are interested please get in contact with Alex Denton of CBW Staffing solutions!....Read more...
Shift Engineer – Continental Shift – Commercial Building – Liverpool Street, London – £48,000 Per annumMy client is looking for an Electrical or Mechanical Shift Engineer to be based in a commercial building in Liverpool Street, London. A successful candidate will be electrically or mechanically biased (C&G / NVQ). Working with the maintenance team on site, He or she will be required to carry out electrical, and mechanical maintenance. In return, the company offers a competitive salary of £48,000, further training and career progression. Package£48,000 per annumUniform and Tools ProvidedCycle to work scheme22 days holidayOvertime AvailablePensionInternal Progression & DevelopmentHours of workContinental Shift - 4 nights, 4off, 3 days, 3 nights, 6off, 4 days - 07:00am - 19:00pm / 19:00am - 07:00am Key Duties & ResponsibilitiesLighting (Small installation, Fault-finding, Lamping, Changing ballast's, Control panel, Power distribution)Emergency lightingAir Conditioning - Air Handling Units / Fan Coil Unit (Filter changes, cleaning)Chillers - Re-setWater Treatment (Temperature checks / Not dosing)Monitor mechanical plantPlumbing - Unblocking toiletsPumps, motorsWater TreatmentBMS System - Monitor (i.e. Hot & Colds)Undertake all allocated tasks and perform them in a timely and professional manner.Be proactive in identifying and reporting faults with building services equipment and take steps to resolve them.Be proactive to ensure all H&S issues are reported/escalated as required.Maintain informal communications with Client staff members related to service levels and issues.Report service affecting issued to the site management team for formal communication with the client.Remain flexible with regard to site attendance and tasks undertaken within personal competency.Be fully aware of relevant Health and Safety and general legislative matters.Escort specialist subcontractorsRequirementsElectrically qualified level 3 or Mechanically qualified level 2(C&G, NVQ etc)18th edition (If electrically qualified)Experience working in a large commercial buildingYou must be able to provide copies of your trade certificates (Essential)A proven track record in commercial building maintenanceMulti-skilledGood communication skillsExcellent customer skillsMust be able to get to the site for 07:00 am startIf you are interested please get in contact with Alex Denton of CBW Staffing solutions!....Read more...
Shift Engineer – Continental Shift – Commercial Building – Charing Cross, London – £44,000 Per annumMy client is looking for an Electrical or Mechanical Shift Engineer to be based in a commercial building in Charing Cross, London. A successful candidate will be electrically or mechanically biased (C&G / NVQ). Working with the maintenance team on site, He or she will be required to carry out electrical, and mechanical maintenance. In return, the company offers a competitive salary of £44,000, further training and career progression. Package£44,000 per annumUniform and Tools ProvidedCycle to work scheme22 days holidayOvertime AvailablePensionInternal Progression & DevelopmentHours of workContinental Shift - 4 nights, 4off, 3 days, 3 nights, 6off, 4 days - 07:00am - 19:00pm / 19:00am - 07:00am Key Duties & ResponsibilitiesLighting (Small installation, Fault-finding, Lamping, Changing ballast's, Control panel, Power distribution)Emergency lightingAir Conditioning - Air Handling Units / Fan Coil Unit (Filter changes, cleaning)Chillers - Re-setWater Treatment (Temperature checks / Not dosing)Monitor mechanical plantPlumbing - Unblocking toiletsPumps, motorsWater TreatmentBMS System - Monitor (i.e. Hot & Colds)Undertake all allocated tasks and perform them in a timely and professional manner.Be proactive in identifying and reporting faults with building services equipment and take steps to resolve them.Be proactive to ensure all H&S issues are reported/escalated as required.Maintain informal communications with Client staff members related to service levels and issues.Report service affecting issued to the site management team for formal communication with the client.Remain flexible with regard to site attendance and tasks undertaken within personal competency.Be fully aware of relevant Health and Safety and general legislative matters.Escort specialist subcontractorsRequirementsElectrically qualified level 3 or Mechanically qualified level 2(C&G, NVQ etc)18th edition (If electrically qualified)Experience working in a large commercial buildingYou must be able to provide copies of your trade certificates (Essential)A proven track record in commercial building maintenanceMulti-skilledGood communication skillsExcellent customer skillsMust be able to get to the site for 07:00 am start....Read more...
We are looking for an enthusiastic and determined individual who is looking for an exciting opportunity to learn on hand industry experience within a sales department whilst studying towards a professional qualification and accreditation
Main Function/Purpose of Job:
Supports the UK JLR sales team on the response of customer design changes through quotation documents at a core functional level for the successful financial status of all relevant programmes
Supporting the wider programme development team through the programme lifecycle, including managing changes and supporting business meetings
Manages (with supervision) low to mid-level programme, quoting current lifecycle parts for service and re-quoting parts for end-of-life production
Maintenance of commercial trackers to capture any programme changes to the financials
Supports the plants commercial activities and processing of claims to achieve business metrics
Principle Accountabilities:
As part of the apprenticeship programme, you will be required to study towards a Level 6 Chartered Manager Degree qualification in line with Apprenticeship standards and the education provider
Is directly accountable to the Sales Manager for the related customer (JLR) at a core functional level to support the successful implementation of programmes within the business
Monitor financial development for a low to mid-level account on sales pricing, tooling cost, CAPEX investment and engineering development costs
Provide cross-functional interface for the customer supporting the sales manager and programme team while attending all necessary regular meetings to ensure a sufficient level of programme support is provided and maintained
Ensure correct escalation and reporting of programme financial issues in a timely manner to the relevant management level to achieve successful resolution
Training:Chartered Manager (degree) Level 6.
Over the course of the programme, you will have day release to Coventry University to attend lectures whilst working your remaining week within the sales team to provide support for the customer, Jaguar Land Rover. There will be a structured programme in place for you to gain knowledge of the automotive product the business produces, with support and mentoring to develop your skills for an account management role. This will include taking on responsibilities for the aftermarket sales account and providing support for the wider team on several topics.Training Outcome:Progression into a Sales Engineer role.Employer Description:Treves UK is a subsidiary of the Treves Group. We operate from our plant in Farnham, North Yorkshire, HG5, with a smaller office in Coventry, CV3. The group manufactures and supplies interior and acoustic components to the automotive industry. We are a Tier 1 supplier to our customers, supplying directly to their assembly line where the cars that you see in the showroom are put together. As a plant we currently employ over 175 staff within the UK and over 4,500 across the Global GroupWorking Hours :37.5 hour working week, including time spent at university.
Monday to Friday.
Flexi time.
Working hours TBC.Skills: Communication skills,IT skills,Attention to detail,Organisation skills,Customer care skills,Problem solving skills,Presentation skills,Administrative skills,Number skills,Analytical skills,Logical,Team working,Creative,Initiative....Read more...
Job title: LNG InstructorLocation: Glasgow, UKWho are we recruiting for? Executive Integrity is working alongside a globally recognised shipping company and worlds leaders in energy transportation, with one of the largest fleets of Liquefied Natural Gas (LNG) vessels. Our client is committed to providing the highest level of operational performance for their customers, and always safety first.What will you be doing? The key function of this role is the management and delivery of LNG training courses at the Training Centre in Glasgow. The LNG instructor provides technical expertise to the gas team including advising on best practices, identifying and writing seafarer competencies.Major Responsibilities:
Provide instruction on mandatory and non-mandatory courses ranging from basic gas familiarisation to management level for ship officers, using both classroom and simulator environments.
Develop and update training programs to align with STCW, IMO model courses, industry guidelines, and new technologies on new builds.
Assess and evaluate student performance to monitor learning, check instructional effectiveness, and verify competence for current or intended roles.
Assist in preparing and submitting course materials to accrediting authorities and ensure course content remains up-to-date with the latest regulations and industry needs.
Are you the ideal candidate?The ideal candidate will have sailed as Master or Chief Engineer on Gas Tankers. This person will need good knowledge of international maritime regulations, industry standards and have a sound understanding of LNG and the vessels. Excellent communication skills are needed.Requirements
Class 1 Certificate of Competency (STCW II/2 Deck or Engine STCW III/2) and Tanker endorsement (Liquefied Gas)
Have a good command of the English language
Be prepared to gain instructor or teaching qualifications as required
Have significant experience at the management level (Master, Chief Officer or Chief Engineer) onboard gas tankers, preferably including LNG. This experience should include direct involvement in cargo operations.
What’s in it for you?
Competitive salary and benefits, designed to reward your expertise.
Opportunities for personal and professional growth within a vibrant, collaborative team.
A challenging, fast-paced work environment that encourages creativity and leadership.
Support for professional development in an industry-leading, award-winning company.
Who are we?Executive Integrity is a global executive search and recruitment consultancy for a more sustainable world with a focus on talent within the Green Technology and Renewable Energy sectors. We give a proportion of all our profits to Renewable World, a charity that develops affordable and innovative renewable energy solutions to poverty-stricken communities. For every placement, we plant a tree with the National Trust Foundation.....Read more...
Responsibilities will include:
Scheduled and planned preventive maintenance on high-speed production and services equipment
Fault finding and reactive maintenance on all plant equipment in the event of breakdowns
Workshop-based activities including motor and winder repairs
Condition-based monitoring on equipment
Programming control systems including PLC, SCADA & DCS
Training:The first 12 months of the programme will be spent attending Gloucestershire Engineering Training College (GET) on a full-time basis to achieve a broad-based engineering introduction, NVQ at Level 2 and Technical Certificate Year 1.
In the subsequent 3 years the apprentices will have on site training at the INVISTA Gloucester site working alongside INVISTA’s skilled Technicians and Engineers with one day per week spent at GET. The apprentice will work towards and achieve a NVQ level 3 in Mechatronics Maintenance and Technical Certificate (in Year 2).
There is also the potential for the apprentices to complete a Higher National Certificate in Mechatronics, Electrical Engineering or equivalent.Training Outcome:Successful applicants will be supported in their learning and development by their supervisor and the operations/engineering teams. You will have opportunities for industrial training and access to global learning platforms to enable you to propel forward your career and professional development as an engineer.Employer Description:INVISTA is a global manufacturer of chemical intermediates, polymers, and fibers. From parts for the automotive industry to medical equipment, air bags, food packaging, carpet and clothing, our ingredients in the nylon 6,6 and polypropylene value chains help bring many of life’s essential products to market. A subsidiary of Koch Industries since 2004, INVISTA is committed to innovation and responsibly creating more value for its customers and society while consuming fewer resources to make these products. See the bigger picture at INVISTA.com.Working Hours :Monday to Thursday: 7.30am to 4.00pm, Friday: 7.30am to 3.00pm.Skills: Communication skills,Attention to detail,Logical,Team working,Initiative,Interpersonal skills,Self Motivated....Read more...
£45,000 + Vehicle + Laptop + Phone + BenefitsAs a result of sustained UK growth, a number of opportunities exist for experienced Mechanical and Electrical Field Service Engineers with strong knowledge of plant equipment repair and maintenance to join a fast-growing, ambitious organisation.Our client is a dynamic, privately owned company established in 2001 with a proud history of delivering quality products and dewatering services to the Waste Management and Manufacturing Industries. The company is financially stable and holds ISO standards in Quality, Environmental and Health & Safety.The ideal candidate, who is mature, organised and able to undertake the repair of high-speed rotating equipment and electrical systems, will have an electrical or mechanical engineering bias, having served a recognised apprenticeship or other formal training.Key Responsibilities
To Install, maintain, and sometimes operate our range of Mobile Processing Equipment.
To undertake weekly, and monthly on-site servicing of our, and our customers equipment
To attend mechanical breakdowns repairs at short notice when required.
Undertake servicing and repairs of equipment at Sludge TEK workshop in Andover.
Ideally able to undertake and document the statutory Electrical Installation Condition Reports (EICR) for our fleet of mobile processing units.
To undertake and document the statutory Portable Appliance Testing (PAT) of our workshop and office equipment.
Assist sales department with customer survey visits.
Supervise and train subcontract labour.
Compile Risk Assessments and Method Statements prior to undertaking site work.
Some travel, mostly UK but occasional overseas work.
Call out rota and some weekend working required.
Skills & Experiences
Ideally NICEIC 18th Edition qualified.
Familiar with industrial installation and control systems.
Living within M4/M5 corridors.
Familiar with PLC/Micro Processor control systems and Star/Delta or Inverter motor drive techniques up to 130 Kw.
Process Experience; currently is or has worked in the water, or process/manufacturing industry.
Flexible; must be willing to work the hours required of a service engineer.
Customer Focused; must be able to communicate at all levels and gain the trust and respect of customers and other team members.
Computer and General Literacy; must be able to compile service and visit reports and be able to use MS Word, Outlook and Excel software.
Willingness to learn new skills and gain new qualifications.
Driving Licence; must have clean full driving licence.
The Rewards
Competitive salary based on ability and experience.
Paid overtime.
Ongoing training.
Company vehicle, laptop and phone.
Pension, following qualifying period.
Private healthcare, following qualifying period.
5 weeks holiday, plus bank holidays.
This is a varied and challenging role for a technical, hands-on Mechanical, Electrical or Multi-Skilled Engineer to progress their career within an established and successful organisation committed to delivering the highest levels of customer satisfaction. Apply now!....Read more...
