Main responsibilities and accountabilities
Support the maintenance supervisor in ensuring the manufacturing site is always maintained to an operational level.
Management of contractors on site, ensuring RAMS are in place for all works carried out on site.
Control of maintenance activities and records to ensure compliance with relevant regulations and codes of practice.
Carry out low level electrical repairs.
Carry out mechanical maintenance/repairs on fabrication machinery.
Support the Maintenance Supervisor in carrying out daily TPM checks.
Weekly routine inspection of ladders.
Weekly routine inspections of gas regulators and gas valves.
Support the maintenance engineer is carrying out ad-hoc projects which could include.
Joinery applications.
Plumbing applications.
Car Park Maintenance.
Inspection and replacement of airlines.
Production line repairs or improvements.
Painting/decorating/replacement of floor tiles.
Safety
Adopt a zero-harm culture within all areas of the business to ensure all employees are working safely and adhere to safety policies and practices at all times.
To ensure the workshop area is kept tidy, floor areas are kept clean, walkways are clear from obstruction.
Promote Clean as you Go approach to working
Ensure that all PPE that is issued is worn correctly and used in line with Company H&S policy.
Report any potential infringements of Health and Safety policy or safety practices to the Team Leader or fabrication supervisor.
Always ensure that you are fully conversant with the Risk Assessment associated with your area of work.
Report accidents and near misses immediately to the HR Manager.
General
Undertake any training events necessary to fulfil the role.
Assist and take a proactive approach and be involved with any project work that is being carried out to improve production workflow.
Carry out any reasonable duties as requested by the senior management of the business.
Always treat your fellow colleagues with dignity and respect at all times.
Training Outcome:Full-time position on succesfull completion of the Apprenticeship.Employer Description:A manufacturer and supplier based in Blackpool of cooling and dispense systems for the brewing, water and soft drinks industry.Working Hours :Monday to Thursday 08:00 - 17:00 and Friday 08:00 – 12:00.Skills: Communication skills,Attention to detail,Organisation skills,Analytical skills,Logical,Team working,Initiative,Physical fitness....Read more...
AA Euro Group are currently seeking a QA/QC Engineer to join a Main Contractor specializing in Critical Environments such as Data Centres, Life Sciences, Aviation, High Value Manufacturing and Critical Logistics. This is a site-based position for a new Data Centre build in the Canary Wharf area.Role Responsibilities
Develop and be responsible for all QA/QC documents for the entire project including certificates, calibration, test results, inspection requests, non-compliance reports and site instruction/ observations, permanent materials delivered and other QA/QC documents.Develop and determine all standards to perform inspection and tests on all procedures and oversee all testing methods ensuring high standards of quality are maintained for all processes.Review the quality of all materials at the site and ensure compliance with all project specifications and quality collaborate with the Procurement Department and Project Team for all material procurement and maintain a high quality of materials.Supervise the effective implementation of all test and inspection schedules and ensure adherence to all procedures and coordinate with various teams to perform quality audits on processes.Assist with training to ensure that all employees have sufficient knowledge of all quality standards and ensure compliance to all quality manuals and procedures and collaborate with contractors and suppliers to maintain the quality of all systems.Ensure sufficient quality processes are in place to manage the lifting of all materials and equipment and also the storage of all hazardous materials. Perform quality audits as per the required schedule.Regularly analyse all products and non-conformance processes, including the evaluation of all documents to ensure that they meet quality requirement. Prepare monthly reports to evaluate performance.Develop a robust system to Review and monitor all project activities, completing analysis to ensure all processes and work completed meet quality requirements.Work closely with the Project Team to manage all work methods. Maintaining knowledge on all quality assurance standards and monitor continuous application for all quality assurance processes, recommending corrective actions as required.Work closely with H&S Team to ensure that method statements are in place for all activities including risk assessment and job safety environmental analysis.Develop an Inspection Test Plan and Checklist based on specifications of the project.Liaise with the Project Team for submission of material submittals to the Client Team.Coordinate with the Client Team in relation to all audits/site inspections.
Requirements
Third level qualification in Engineering or related discipline.Minimum of 5 years’ experience in construction/engineeringExcellent ability to work in a cross-functional team environment.Extremely detail oriented with well-developed trouble shooting skills.Excellent organisation and time management skillsExcellent IT SkillsKnowledge of all relevant building and quality regulationsExcellent communication skills, both written and verbal.
INDWC....Read more...
AA Euro Group are currently seeking a QA/QC Engineer to join a Main Contractor specializing in Critical Environments such as Data Centres, Life Sciences, Aviation, High Value Manufacturing and Critical Logistics. This is a site-based position for a new Data Centre build in the Canary Wharf area.Role Responsibilities
Develop and be responsible for all QA/QC documents for the entire project including certificates, calibration, test results, inspection requests, non-compliance reports and site instruction/ observations, permanent materials delivered and other QA/QC documents.Develop and determine all standards to perform inspection and tests on all procedures and oversee all testing methods ensuring high standards of quality are maintained for all processes.Review the quality of all materials at the site and ensure compliance with all project specifications and quality collaborate with the Procurement Department and Project Team for all material procurement and maintain a high quality of materials.Supervise the effective implementation of all test and inspection schedules and ensure adherence to all procedures and coordinate with various teams to perform quality audits on processes.Assist with training to ensure that all employees have sufficient knowledge of all quality standards and ensure compliance to all quality manuals and procedures and collaborate with contractors and suppliers to maintain the quality of all systems.Ensure sufficient quality processes are in place to manage the lifting of all materials and equipment and also the storage of all hazardous materials. Perform quality audits as per the required schedule.Regularly analyse all products and non-conformance processes, including the evaluation of all documents to ensure that they meet quality requirement. Prepare monthly reports to evaluate performance.Develop a robust system to Review and monitor all project activities, completing analysis to ensure all processes and work completed meet quality requirements.Work closely with the Project Team to manage all work methods. Maintaining knowledge on all quality assurance standards and monitor continuous application for all quality assurance processes, recommending corrective actions as required.Work closely with H&S Team to ensure that method statements are in place for all activities including risk assessment and job safety environmental analysis.Develop an Inspection Test Plan and Checklist based on specifications of the project.Liaise with the Project Team for submission of material submittals to the Client Team.Coordinate with the Client Team in relation to all audits/site inspections.
Requirements
Third level qualification in Engineering or related discipline.Minimum of 5 years’ experience in construction/engineeringExcellent ability to work in a cross-functional team environment.Extremely detail oriented with well-developed trouble shooting skills.Excellent organisation and time management skillsExcellent IT SkillsKnowledge of all relevant building and quality regulationsExcellent communication skills, both written and verbal.
INDWC....Read more...
As part of our 200-strong In-Service Submarine Engineering Team, you’ll be joining a group of dedicated professionals who support both in-service and build-stage submarines. The work is varied and meaningful, ranging from design investigations and feasibility studies to maintaining the technical records and configuration data that keep each vessel safe and operational.
Collaboration is at the heart of everything we do. Working alongside engineers and technical specialists, you’ll contribute to real projects that combine design, assurance and engineering delivery. Your time will be split between producing and reviewing 2D and 3D Computer-Aided Design (CAD) models, carrying out engineering surveys, and supporting data management and documentation. You may also have opportunities to visit submarines at HM Naval Base Clyde in Scotland, gaining valuable insight into how your work supports the fleet.
As your knowledge and confidence grow, you’ll take on more responsibility in areas such as change control, technical reporting and quality assurance. Every experience will help you build strong analytical and problem-solving skills, while developing a practical understanding of how engineering principles are applied to real-world challenges.
Training:As part of your apprenticeship, you’ll study for the Level 4 Engineering Manufacturing Technician Apprenticeship Standard through Weston College, working towards a Higher National Certificate (HNC) in Engineering. For the first two years, you’ll attend college one day per week, building your academic and technical knowledge while applying what you learn back in the workplace. In your later years, you’ll focus more on live projects, developing practical and professional skills that will prepare you for a career as an engineering professional. Training Outcome:When you complete the programme, you’ll move into a role as a Trainee Engineer or Configuration Technician. You’ll have the technical understanding, professional qualification and practical experience to take on complex engineering work with confidence. Upon completion, you can expect to earn a competitive salary exceeding £38,000. From there, your development doesn’t stop. Through the Babcock Role Framework, you’ll have a clear view of how your career can progress, with mapped-out pathways, development opportunities and the tools you need to get wherever you want to go. Employer Description:Babcock is an international defence company providing support and product solutions to enhance our customers’ defence capabilities and critical assets.
We provide through-life technical and engineering support for our customers’ assets, delivering improvements in performance, availability and programme cost. Our c27,700 employees deliver these critical services to defence and civil customers, including engineering support to naval, land, air and nuclear operations, frontline support, specialist training and asset management.
We also design and manufacture a range of defence and civil specialist equipment, from naval ship and weapons handling systems to liquid gas handling systems. We also provide integrated, technology-enabled solutions to our defence customers in areas such as secure communications, electronic warfare and air defence.Working Hours :Monday to Friday 9am to 5pmSkills: Communication skills,Organisation skills,Team working....Read more...
Quality EngineerJob description:I Holland Limited is the most well-known producer of tablet punches and dies in the world. We have been in business for 75 years and are a true British industrial success. Thousands of customers in over 100 countries rely on us to supply precise tooling solutions based on our decades of experience, research, and engineering know-how.Job Purpose:To assist the Quality Manager in maintaining the Quality Management System with the aim of ensuring structure and control within all business processes whilst, developing a culture of continuous improvement within all areas of the business.Principal duties & responsibilities1. Carry out detailed investigative internal audits2. Perform Gauge Calibration3. Responsible for carrying out RC/CA investigations4. Assist in re-certification to ISO9001:20155. Assist with certification to ISO14001:20156. Be actively involved in continuous improvement groups7. Be actively involved in updating the work instructions controls into our business systems8. To help with the maintenance of our current MES system:a. Ensuring that it’s effective in controlling process flowsb. Programming process flows into the MES new systemc. Ensuring that robust measurement/process data is capturedd. Ensuring that captured data is analysed, highlighting any trends that might cause concerne. Ensure that the implementation of the new system has as little impact on the business as possible9. Carry out quality-based training and education for all employees when requiredNature and Scope:Working for the Quality Manager, you will be given clear objectives but will be expected to show initiative whilst being able to respond quickly to changes in priorities.Key Performance Indicators:- Completion of detailed Internal Audits identifying opportunities for improvement- Making sure Gauge Calibration is always up to date- Reduced audit NCRs No’s due to RC/CA’s from detailed investigative internal audits- Re-certification to ISO9001:2015Essential Qualifications;- Minimum HNC Mechanical Engineering or equivalent- Internal Auditing QualificationDesirable Qualifications;- ISO9001 Qualification- Root Cause Analysis QualificationEssential Experience;- Two years QA experience within an Engineering Company- Involvement in 8D Investigations- Internal Auditing- Inspection Equipment Calibration- Able to read complex Engineering Drawings- Use of Root Cause analysis Tools (5 Why, Fishbone, etc.)Desirable Experience;- Leading 8D Investigations- Supplier AuditingEssential Knowledge;- RC/CA Knowledge- ISO standards & certificationDesirable Knowledge;- Statistical analysis of data- Supplier AuditingI Holland operate a Profit Related Payment (P.R.P.) Bonus Scheme. All employees will be eligible for payments under the rules of the scheme, following successful completion of a probationary period.Terms and Conditions of EmploymentPlease note that any offer of employment is contingent upon the following conditions: agreement to a Disclosure and Barring Service (DBS) check, References/Background & Right to Work Documentation checks. The Company may terminate employment without notice if any documentation is unsatisfactory.Job Type: Full-timePay: £40,000 per year plus profit-related pay (PRP)Benefits:• Company pension• PRP – Profit-related pay• Cycle to work scheme• Employee discount• Free flu jabs• Free parking• Health & wellbeing programme• On-site parking• Profit sharing• Store discount
Experience:• Manufacturing: 2 years (required)• HNC Engineering or equivalent: 1 year (required)
Work Location: In person -Long Eaton, Nottingham
Click 'Apply' to forward your CV.....Read more...
JOB DESCRIPTION
Location: New Orleans, LA
Summary:
Ready to hit the road and make a real impact? As a Field Technical Service Engineer, you'll be the front-line expert supporting job startups, inspecting coatings, and solving challenges in the field. You'll also contribute to in-house testing, equipment upkeep, and product evaluations-helping drive innovation and excellence in protective coatings.
Minimum Requirements:
High School Diploma or equivalent 2-year college Chemistry or minimum 5 years Technical Service experience Valid Driver's License Valid Passport NACE Certified CIP preferred (Level 1, Level 2, or Level 3), or ability to obtain within 6 months.
Physical Requirements:
Occasional physical activity required. Ability to lift up to 75 lbs. Extended computer usage (up to 8 hours/day) Must be able to climb and meet 1A Ladder requirements. Occasional exposure to chemicals Travel required 50%+, including nights and weekends. Must pass and maintain respirator fit test requirements.
Essential Functions:
Prepare coating panels with precision and care-laying the foundation for high-performance testing. Confidently operate and maintain a variety of tools and equipment, including hand tools, power tools, abrasive blast cabinets, and pin welders. Document and track panel performance to ensure accurate and reliable testing outcomes. Execute certified spray applications for nuclear testing orders with attention to detail and safety. Take charge of routine field jobs, providing expert guidance and technical support to ensure smooth operations. Collaborate with customers and sales teams to gather critical job data and prepare for successful field visits. Lead hands-on demonstrations of mixing equipment, airless and conventional spray systems-showcasing best practices for applying Carboline products. Interpret surface preparation standards with confidence, ensuring compliance with job specifications. Train and empower painters, inspectors, and supervisors with practical techniques and technical know-how. Support evaluations of new products and equipment, contributing to innovation and continuous improvement. Follow established procedures from the Technical Service Procedures Manual to maintain consistency and quality. Champion the Company's safety and quality programs, setting the standard for excellence in the field.
Who We Are: Carboline is a St. Louis-based coatings manufacturer with a global reach. The company, founded in 1947, produces high-quality performance coatings, linings, and fireproofing products in more than 20 manufacturing facilities around the world. Carboline has been ranked a top workplace, so culture and maintaining a safe and clean work environment is something we take very seriously. Carboline is part of RPM International Inc., a $7.6 billion, multinational company with subsidiaries that are world leaders in specialty coatings, sealants, building materials and related services. From homes and workplaces to infrastructure and precious landmarks, RPM's market-leading brands are trusted by consumers and professionals alike to help build a better world. If you want to be part of a growing global organization with opportunity for growth, we would like to meet you.
What We Offer: We offer a team atmosphere that fosters cooperation and creativity; a management team committed to employee development and an environment where people are empowered to make decisions. Our career opportunities offer unlimited earnings potential, and our comprehensive benefits package is among the best in the industry which includes affordable benefits, a company match 401K plan and a retirement pension plan. Carboline is an Equal Opportunity Employer that values the strength diversity brings to the workplace. Individuals with Disabilities and Protected Veterans are encouraged to apply.
"In order to be the best, we must hire the best."Apply for this ad Online!....Read more...
Quality EngineerJob description:I Holland Limited is the most well-known producer of tablet punches and dies in the world. We have been in business for 75 years and are a true British industrial success. Thousands of customers in over 100 countries rely on us to supply precise tooling solutions based on our decades of experience, research, and engineering know-how.Job Purpose:To assist the Quality Manager in maintaining the Quality Management System with the aim of ensuring structure and control within all business processes whilst, developing a culture of continuous improvement within all areas of the business.Principal duties & responsibilities1. Carry out detailed investigative internal audits2. Perform Gauge Calibration3. Responsible for carrying out RC/CA investigations4. Assist in re-certification to ISO9001:20155. Assist with certification to ISO14001:20156. Be actively involved in continuous improvement groups7. Be actively involved in updating the work instructions controls into our business systems8. To help with the maintenance of our current MES system:a. Ensuring that it’s effective in controlling process flowsb. Programming process flows into the MES new systemc. Ensuring that robust measurement/process data is capturedd. Ensuring that captured data is analysed, highlighting any trends that might cause concerne. Ensure that the implementation of the new system has as little impact on the business as possible9. Carry out quality-based training and education for all employees when requiredNature and Scope:Working for the Quality Manager, you will be given clear objectives but will be expected to show initiative whilst being able to respond quickly to changes in priorities.Key Performance Indicators:- Completion of detailed Internal Audits identifying opportunities for improvement- Making sure Gauge Calibration is always up to date- Reduced audit NCRs No’s due to RC/CA’s from detailed investigative internal audits- Re-certification to ISO9001:2015Essential Qualifications;- Minimum HNC Mechanical Engineering or equivalent- Internal Auditing QualificationDesirable Qualifications;- ISO9001 Qualification- Root Cause Analysis QualificationEssential Experience;- Two years QA experience within an Engineering Company- Involvement in 8D Investigations- Internal Auditing- Inspection Equipment Calibration- Able to read complex Engineering Drawings- Use of Root Cause analysis Tools (5 Why, Fishbone, etc.)Desirable Experience;- Leading 8D Investigations- Supplier AuditingEssential Knowledge;- RC/CA Knowledge- ISO standards & certificationDesirable Knowledge;- Statistical analysis of data- Supplier AuditingI Holland operate a Profit Related Payment (P.R.P.) Bonus Scheme. All employees will be eligible for payments under the rules of the scheme, following successful completion of a probationary period.Terms and Conditions of EmploymentPlease note that any offer of employment is contingent upon the following conditions: agreement to a Disclosure and Barring Service (DBS) check, References/Background & Right to Work Documentation checks. The Company may terminate employment without notice if any documentation is unsatisfactory.Job Type: Full-timePay: £40,000 per year plus profit-related pay (PRP)Benefits:• Company pension• PRP – Profit-related pay• Cycle to work scheme• Employee discount• Free flu jabs• Free parking• Health & wellbeing programme• On-site parking• Profit sharing• Store discount
Experience:• Manufacturing: 2 years (required)• HNC Engineering or equivalent: 1 year (required)
Work Location: In person -Long Eaton, Nottingham
Click 'Apply' to forward your CV.....Read more...
Maintenance Technician - Scunthorpe
Salary: £40,000 - £42,500 (inclusive of shift allowance)
Shifts:
Week 1: Mon-Wed Days (06:00-18:00)
Week 2: Mon-Tue Nights (18:00-06:00), Wed Off, Thu-Fri Days (06:00-18:00)
Week 3: Mon-Tue Off, Wed-Fri Nights (18:00-06:00)
Recruiter: Aqumen Recruitment
Contract: Full-Time, Permanent
Join the Engineering Team Driving Real Impact!
Aqumen Recruitment is delighted to be supporting our client, a leading manufacturing organisation in Scunthorpe, as they seek an experienced Maintenance Technician to join their dynamic engineering team.
This is a fantastic opportunity for a multiskilled engineer who thrives in a fast-paced production environment and enjoys taking ownership of both planned and reactive maintenance. If you're passionate about keeping machinery running smoothly-and solving problems before they escalate-this role is for you.
Main Purpose of the Role
As a Maintenance Technician, you'll work as part of a high-performing maintenance team, delivering general, routine, and unplanned maintenance across plant machinery, equipment, and facilities. The goal is simple: ensure rapid response, fast rectification, and reliable uptime.
Key Responsibilities
Maintenance & Engineering
Respond quickly to production breakdowns to minimise downtime.
Support production across a variety of injection moulding machines (60-2700 tonnes), performing repairs, diagnostics, and fault-finding.
Maintain, adjust, and set up laser cells, PU cells, assembly systems, and automation equipment.
Carry out planned service work and participate in weekend start-up/shutdown rotations.
Support installation work, site upgrades, and continuous improvement projects.
Conduct mandatory safety checks on allocated machinery.
Health & Safety
Maintain strict adherence to all company and site Health & Safety requirements.
Proactively identify and report potential H&S risks.
Follow environmental protection procedures.
Empowered to stop work immediately if a threat to life, health, or fire safety is identified.
Quality
Work in compliance with IATF quality standards.
Maintain excellent housekeeping during and after all tasks.
Identify and communicate needs for spare parts.
What We're Looking For
Essential Qualifications & Experience
City & Guilds 214 Mechanical Engineering, HNC/ONC, or NVQ Level 3 in Mechanical/Electrical Engineering (or equivalent).
Time-served apprenticeship in manufacturing/production engineering.
Strong mechanical, hydraulic, pneumatic, and electrical knowledge.
Ability to read diagrams, drawings, and technical documentation.
Experience working safely within an engineering environment.
Solid fault-finding and problem-solving capability.
Desirable
18th Edition Electrical Installations
Overhead crane licence
Experience with automation and assembly equipment
Knowledge of CI/Lean Engineering techniques
Familiarity with 6- and 3-axis robotics
Experience with plastic injection moulding machinery
Behaviours
Motivated and proactive, with a strong desire for self-development.
Able to operate effectively under pressure and meet tight timeframes.
Confident working independently or collaboratively as part of a team.
Why Join Our Client?
Competitive salary including shift allowance
Opportunity to work with advanced machinery and automation
Varied, hands-on, and fast-paced engin
....Read more...
