Domestic Technical Engineer – Social Housing – London & Surrounding Areas – Up to £48,000 Basic + Overtime OTE of £58,000 with OT Are you an experienced Domestic Gas Engineer with advanced fault-finding and diagnostic skills? Do you have the technical knowledge to resolve complex heating faults, support other engineers and improve engineering standards across a busy Social Housing contract?If so, read on...CBW is currently recruiting for a Domestic Technical Engineer to work across a portfolio of Housing Association and Local Authority properties throughout London and the surrounding areas. The successful candidate will act as a senior technical resource, attending complex, recurring and previously unresolved heating and hot-water faults. You will also inspect completed work, investigate repeat call-backs, provide technical support to engineers and help maintain consistently high standards of workmanship and compliance. This is an excellent opportunity for a highly experienced domestic heating engineer looking to move into a senior technical position while remaining hands-on in the field. Role Locations:South East LondonSouth West LondonNorth LondonMy client is also willing to consider engineers based around the M25, so applications from all suitable locations are welcome. Duties & ResponsibilitiesAttend complex, recurring and previously unresolved domestic heating and hot-water faults.Carry out advanced fault finding across boilers, heating systems, hot-water systems, controls and associated components.Diagnose the root cause of intermittent faults using an evidence-led approach.Test pumps, motorised valves, thermostats, programmers, wiring centres, sensors and heating controls.Diagnose faults across S-plan, Y-plan, multi-zone, open-vented and sealed heating systems.Use a multimeter to complete voltage, resistance, continuity and functional testing.Inspect completed or problematic work to assess diagnosis, workmanship and technical compliance.Review repeat call-backs and identify the underlying reason for recurring faults.Provide technical advice and support to domestic gas engineers in the field.Assist with engineer coaching, toolbox talks, training and competency development.Support technical investigations following gas-related incidents or serious service failures.Preserve evidence and produce accurate reports where further investigation may be required.Ensure work complies with Gas Safe requirements, relevant legislation and company procedures.Maintain an appropriate working knowledge of HSE requirements, RIDDOR and incident-escalation procedures.Complete detailed and auditable technical reports, including test results, readings, photographs, findings and recommended remedial action.Communicate technical findings clearly to engineers, management, residents and clients.Complete job reports using a PDA.Provide professional customer service within occupied residential properties.Participate in the out-of-hours call-out rota.Hours of WorkSummer: 8:00am–5:00pmWinter: 8:00am–6:00pmAverage 42.5-hour working weekOvertime availableCall-out rota approximately 1 in 4–8, depending on areaPackage£45,000–£48,000 basic salaryCompany van and fuel cardNear-unlimited overtime1.5x overtime Monday–Friday2x overtime at weekends£120 standby payment while on call£30 per completed call-outPerformance bonus for completing additional jobs£5 bonus for every positive customer review28 days’ annual leave, including Bank HolidaysCompany pensionUniform, PPE and PDA providedOngoing training and career progressionRequirementsCurrent domestic ACS qualifications, including CCN1 and CENWAT.Approximately 10–15 years’ substantial hands-on domestic gas and heating experience.Extensive experience diagnosing complex and recurring boiler, heating and hot-water faults.Strong understanding of S-plan, Y-plan, multi-zone, open-vented and sealed heating systems.Strong knowledge of heating controls, wiring centres and electrical fault finding.Confident using a multimeter for voltage, resistance, continuity and functional testing.Previous Social Housing experience is essential.Previous experience as a Senior Engineer, Lead Engineer, Technical Engineer, Diagnostic Engineer, Gas Supervisor or Gas Inspector is desirable.Experience inspecting completed work and assessing technical quality.Ability to produce detailed, evidence-based technical reports.Working knowledge of gas-safety requirements, HSE guidance, RIDDOR and incident escalation.G3 Unvented qualification or willingness to obtain it.An electrical qualification, 18th Edition or recognised controls training would be advantageous.Full UK Driving Licence.Enhanced DBS clearance or willingness to complete the required check.Own calibrated flue gas analyser, standard hand tools and suitable electrical diagnostic equipment.Strong communication skills and the ability to coach and support other engineers.If you are interested, please email your CV to Archie Reed of CBW Staffing Solutions to avoid missing out!....Read more...
A globally successful leader of high speed electronics within the military/aerospace market are seeking a Manufacturing Engineer. These bespoke products are used in hundreds of mission critical applications, where the performance and reliability delivered can be a matter of life and death.
Based in Northamptonshire, it is commutable from Northampton, Milton Keynes, Banbury, Rugby, Coventry, Royal Leamington Spa, Kettering and Bedford.
The Manufacturing Engineer job in Northamptonshire, will ensure all products can be manufactured in a quality assured, reliable, scalable and repeatable manner. Other responsibilities will include performing analysis of manufacturing defects, process failures to determine root cause & develop corrective actions, along with conducting DFMEA / PFMEA reviews with respect to new and existing products. You will also be the interface between the Engineering and Manufacturing functions to develop and introduce new, or enhance existing manufacturing solutions/ processes. You will attend NPI and design reviews, provide product and manufacture development recommendations for new, existing and emerging products and technologies.
The Manufacturing Engineer, Northamptonshire, will have working knowledge of Surface Mount Assembly and have a good level understanding of IPC-A-610.
The ideal candidate for this Manufacturing Engineer job in Northamptonshire, will be someone with a passion to succeed, with an agile mind-set, willing to propose and experiment with new ideas.
APPLY NOW for the Manufacturing Engineer Job, Northamptonshire, by sending your cv to Ricky Wilcocks on rwilcocks@Redlinegroup.Com with an up to date CV and covering letter.....Read more...
Field Service Engineer
Exeter
£30,000 - £33,000 Basic + OTE (£45'000) + Training + Progression + Vehicle + Mobile + Pension
Earn over £45,000 as a field service engineer working for the BEST and most successful company in their industry! You’ll get full training on their products as well as recognition and reward for your work with a company that will treat you as more than just another number.
This company are specialists in the repair, maintenance and calibration of a vast range of mechanical machinery / equipment used in the automotive industry UK wide. Due to continued growth and an overflowing order book, they are looking for a field service engineer who wants to earn £45,000 through overtime, to join their highly experienced team. You’ll have opportunity to develop your skills through continuous training and work for the best in the industry.
Your Role As Field Service Engineer Will Include:
* Field service engineer role - Full product training given * Mechanical servicing of MOT equipment / Garage equipment * Complete maintenance and servicing of machinery - hydraulics / lifting equipment / mechanical fitting / bearings and more. * Regional cover field service engineer role - No stay away required!
As the Successful Field Service Engineer You’ll Have:
* Good mechanical engineering knowledge and skills - machinery / industrial
* Background as a mechanical fitter / mechanic / Garage Equipment / field service engineer / technician (or similar)
* Ex-forces engineers welcomed
* Live around the Exeter Area and be willing to travel as a field service engineer
Please apply or contact Charlie Auburn for immediate consideration
Keywords: Field service engineer, Technician, Mechanic, Garage Equipment, Torque Wrenches, Garage, Exeter, Devon, Plymouth, EX-Forces
This vacancy is being advertised by Future Engineering Recruitment Ltd. The services of Future Engineering Recruitment Ltd are that of an Employment Agency. Future Engineering Recruitment Ltd can only accept applications from candidates who have a valid legal permit or right to work in the United Kingdom. Potential candidates who do not have this right or permit, or are pending an application to obtain this right or permit should not apply as your details will not be processed. We will endeavour to respond to all applicants however due to the sheer volume of response, we can only guarantee that candidates who have been shortlisted will be contacted.....Read more...
An opportunity has arisen for a Network Engineer to join an innovative technology organisation delivering complex software solutions for customers across a specialist technical environment.
As a Network Engineer, you will help maintain and improve enterprise network infrastructure, supporting reliable, secure and high-performing IT services. This full-time role offers salary up to £78,000 and benefits.
Note: Valid DV clearance is essential for this role.
You will be responsible for:
? Supporting network security measures, including firewalls, VPNs, access controls and secure connectivity.
? Keeping network diagrams, technical documentation and operational procedures up to date.
? Contributing to capacity planning, performance improvements and network resilience.
? Supporting virtualised and software-defined networking environments.
? Assisting with automation and Infrastructure as Code activities where appropriate.
? For more experienced engineers, taking ownership of technical workstreams, supporting junior colleagues and contributing to network design decisions.
? Travelling to company premises or other locations when required.
? Keeping technical knowledge up to date through relevant training and professional development.
What we are looking for:
Essential:
? Previously worked as a Network Engineer or in a similar role.
? Valid DV clearance.
? Knowledge of networking fundamentals, including TCP/IP, Routing & switching, VLANs, DNS & DHC and Network troubleshooting methodologies.
? Background in supporting enterprise network environments.
? Familiarity with one or more networking technologies or vendors, such as Cisco, Juniper, Arista, HPE or Fortinet.
? Understanding of network security principles and good practice.Ability to communicate effectively with technical and non-technical stakeholders.
Desirable:
? Experience with routing protocols such as OSPF, BGP, EIGRP, or MPLS, firewall technologies and VPN solutions.
? ....Read more...
An opportunity has arisen for an Infrastructure Engineer to join an innovative technology organisation delivering complex software solutions for customers across a specialist technical environment.
As an Infrastructure Engineer, you will design, implement, maintain and support IT infrastructure while contributing to project delivery, automation and continuous improvement. This role offers salary £78,000 and benefits.
Note: Valid DV clearance is essential for this role.
You will be responsible for:
? Design, plan and implement physical and virtual IT infrastructure solutions.
? Deliver infrastructure projects in line with agreed customer requirements and timescales.
? Maintain and support existing IT infrastructure and deployed systems.
? Diagnose and resolve infrastructure faults and technical issues efficiently.
? Monitor system performance and carry out routine maintenance, including backups, patching, vulnerability management and hardware/software upgrades.
? Prepare and maintain accurate technical documentation for supported infrastructure.
? Record significant incidents, investigations and actions taken to resolve issues.
? Create and maintain scripts and automation tools to streamline routine system administration tasks.
What we are looking for:
Essential:
? Previously worked as an Infrastructure Engineer or in a similar role.
? Valid DV clearance.
? Experience within systems administration and IT infrastructure support.
? A degree in Computer Science, Software Engineering or related discipline, or equivalent practical experience.
? Background leading or taking ownership of IT project delivery.
? Strong knowledge of networking technologies and equipment, including Cisco, Juniper, HP and Dell.
? Good understanding of TCP/IP, DNS, DHCP and related networking protocols.
? Familiarity with virtualisation technologies such as VMware and Hyper-V.
? Practical knowledge of Ansible/AWX, Python, PowerShell and BASH for scripting o....Read more...
Senior Quantexa Data Engineer - London / Hybrid
(Quantexa Data Engineer, Lead Data Engineer, Senior Data Engineer, Data Engineering Manager, Quantexa, Spark, Scala, Python Databricks, DevOps, CI/CD pipelines, Jenkins, GitHub Actions, Azure DevOps, Docker, Kubernetes, Quantexa Data Engineer)
Our client is a global innovator and world leader with one of the most recognisable names within technology. They are looking for an experienced Quantexa Data Engineer with significant experience leading the technical development of Quantexa-based solutions. You will be tasked with designing and implementing robust data pipelines, configuring Quantexa components, and supporting the overall success of client engagements.
We are seeking a Certified Senior Quantexa Data Engineer with significant experience of designing and implementing Quantexa solutions and leading client data engineering or integration projects for established clients.
The successful candidate will have strong knowledge of Spark, Scala and Python Databricks. Any experience of DevOps and CI/CD pipelines, Jenkins, GitHub Actions, or Azure DevOps would be beneficial, as would familiarity with Docker and Kubernetes, but training will be provided.
We are keen to hear from talented Quantexa Data Engineers from all backgrounds.
This is a truly amazing opportunity to work for a prestigious brand that will do wonders for your career. They invest heavily in training and career development with unlimited career progression for top performers.
Location: London / Hybrid
Salary: £60k - £80k + Car + Pension + Benefits
To apply for this position please send your CV to Nathan Warner at Noir Consulting.
(Quantexa Data Engineer, Lead Data Engineer, Senior Data Engineer, Data Engineering Manager, Quantexa, Spark, Scala, Python Databricks, DevOps, CI/CD pipelines, Jenkins, GitHub Actions, Azure DevOps, Docker, Kubernetes, Quantexa Data Engineer)
NOIRUKTECHREC
NOIRUKREC....Read more...
Senior Quantexa Data Engineer - Leeds / Hybrid
(Quantexa Data Engineer, Lead Data Engineer, Senior Data Engineer, Data Engineering Manager, Quantexa, Spark, Scala, Python Databricks, DevOps, CI/CD pipelines, Jenkins, GitHub Actions, Azure DevOps, Docker, Kubernetes, Quantexa Data Engineer)
Our client is a global innovator and world leader with one of the most recognisable names within technology. They are looking for an experienced Quantexa Data Engineer with significant experience leading the technical development of Quantexa-based solutions. You will be tasked with designing and implementing robust data pipelines, configuring Quantexa components, and supporting the overall success of client engagements.
We are seeking a Certified Senior Quantexa Data Engineer with significant experience of designing and implementing Quantexa solutions and leading client data engineering or integration projects for established clients.
The successful candidate will have strong knowledge of Spark, Scala and Python Databricks. Any experience of DevOps and CI/CD pipelines, Jenkins, GitHub Actions, or Azure DevOps would be beneficial, as would familiarity with Docker and Kubernetes, but training will be provided.
We are keen to hear from talented Quantexa Data Engineers from all backgrounds.
This is a truly amazing opportunity to work for a prestigious brand that will do wonders for your career. They invest heavily in training and career development with unlimited career progression for top performers.
Location: Leeds / Hybrid
Salary: £60k - £75k + Car + Pension + Benefits
To apply for this position please send your CV to Nathan Warner at Noir Consulting.
(Quantexa Data Engineer, Lead Data Engineer, Senior Data Engineer, Data Engineering Manager, Quantexa, Spark, Scala, Python Databricks, DevOps, CI/CD pipelines, Jenkins, GitHub Actions, Azure DevOps, Docker, Kubernetes, Quantexa Data Engineer)
NOIRUKTECHREC
NOIRUKREC....Read more...
Senior Quantexa Data Engineer - Birmingham / Hybrid
(Quantexa Data Engineer, Lead Data Engineer, Senior Data Engineer, Data Engineering Manager, Quantexa, Spark, Scala, Python Databricks, DevOps, CI/CD pipelines, Jenkins, GitHub Actions, Azure DevOps, Docker, Kubernetes, Quantexa Data Engineer)
Our client is a global innovator and world leader with one of the most recognisable names within technology. They are looking for an experienced Quantexa Data Engineer with significant experience leading the technical development of Quantexa-based solutions. You will be tasked with designing and implementing robust data pipelines, configuring Quantexa components, and supporting the overall success of client engagements.
We are seeking a Certified Senior Quantexa Data Engineer with significant experience of designing and implementing Quantexa solutions and leading client data engineering or integration projects for established clients.
The successful candidate will have strong knowledge of Spark, Scala and Python Databricks. Any experience of DevOps and CI/CD pipelines, Jenkins, GitHub Actions, or Azure DevOps would be beneficial, as would familiarity with Docker and Kubernetes, but training will be provided.
We are keen to hear from talented Quantexa Data Engineers from all backgrounds.
This is a truly amazing opportunity to work for a prestigious brand that will do wonders for your career. They invest heavily in training and career development with unlimited career progression for top performers.
Location: Birmingham / Hybrid
Salary: £60k - £75k + Car + Pension + Benefits
To apply for this position please send your CV to Nathan Warner at Noir Consulting.
(Quantexa Data Engineer, Lead Data Engineer, Senior Data Engineer, Data Engineering Manager, Quantexa, Spark, Scala, Python Databricks, DevOps, CI/CD pipelines, Jenkins, GitHub Actions, Azure DevOps, Docker, Kubernetes, Quantexa Data Engineer)
NOIRUKTECHREC
NOIRUKREC....Read more...
Senior Quantexa Data Engineer - Manchester / Hybrid
(Quantexa Data Engineer, Lead Data Engineer, Senior Data Engineer, Data Engineering Manager, Quantexa, Spark, Scala, Python Databricks, DevOps, CI/CD pipelines, Jenkins, GitHub Actions, Azure DevOps, Docker, Kubernetes, Quantexa Data Engineer)
Our client is a global innovator and world leader with one of the most recognisable names within technology. They are looking for an experienced Quantexa Data Engineer with significant experience leading the technical development of Quantexa-based solutions. You will be tasked with designing and implementing robust data pipelines, configuring Quantexa components, and supporting the overall success of client engagements.
We are seeking a Certified Senior Quantexa Data Engineer with significant experience of designing and implementing Quantexa solutions and leading client data engineering or integration projects for established clients.
The successful candidate will have strong knowledge of Spark, Scala and Python Databricks. Any experience of DevOps and CI/CD pipelines, Jenkins, GitHub Actions, or Azure DevOps would be beneficial, as would familiarity with Docker and Kubernetes, but training will be provided.
We are keen to hear from talented Quantexa Data Engineers from all backgrounds.
This is a truly amazing opportunity to work for a prestigious brand that will do wonders for your career. They invest heavily in training and career development with unlimited career progression for top performers.
Location: Manchester / Hybrid
Salary: £60k - £75k + Car + Pension + Benefits
To apply for this position please send your CV to Nathan Warner at Noir Consulting.
(Quantexa Data Engineer, Lead Data Engineer, Senior Data Engineer, Data Engineering Manager, Quantexa, Spark, Scala, Python Databricks, DevOps, CI/CD pipelines, Jenkins, GitHub Actions, Azure DevOps, Docker, Kubernetes, Quantexa Data Engineer)
NOIRUKTECHREC
NOIRUKREC....Read more...
.NET Software Engineer, .NET 10.0, C# 14 - Consultancy – Cologne, Germany
(Tech stack: .NET Software Engineer, .NET 10.0, ASP.NET Core, C# 14, Blazor, JavaScript, React, Microservices, Azure, ASP.NET Core Web API, Agile, Azure SQL, Programmer, Full Stack Developer, Architect, Softwareentwickler, Entwickler, .NET Software Engineer)
Our client is an award winning Microsoft consultancy. They specialise in delivering innovative .NET technology based business solutions to investment banks, financial services companies, prestigious music/media label and many more. They are about to embark on one of the most ambitious .NET development projects since the birth of the .NET framework.
We are seeking several .NET Software Engineer with an extensive array of talent and expertise. .NET Software Engineer will be given complete ownership of your business area and the opportunity to work on the full project life cycle. .NET Software Engineer applicants should have a skill set that encompasses some or all of the following: .NET, .NET Core, C# and Azure SQL. Knowledge of software development methodologies is of interest (Agile, Scrum). My client will provide training in: .NET 10.0, ASP.NET Core, C# 14, Blazor, JavaScript, React, Microservices, Azure, ASP.NET Core Web API, MongoDB, Azure, AWS, Node.js and Elasticsearch.
This is a truly exciting project, one which if you are given the opportunity to work on will do wonders for your CV and boost you into the IT super league!
Our client is looking to secure and retain the services of the very best .NET Software Engineer candidates on the market place, as such they are offering a challenging role and working environment, industry recognized training, guaranteed career progression and above market rate salaries.
Location: Cologne, Germany / Remote Working
Salary: €70.000 - €90.000 + Bonus + Benefits
Applicants must be based in Germany and have the right to work in Germany even though remote working is available.
Noir continues to be the leading Microsoft recruitment agency; we can help you make the right career decisions!
NOIRGERMANYRECSPNOIRGERMANYRECNOIREUROPEREC
NC/CM/COL7090....Read more...
.NET Software Engineer, .NET 10.0, C# - Consultancy – Braunschweig, Germany
(Tech stack: .NET Software Engineer, .NET 10.0, ASP.NET Core, C# 14, Blazor, JavaScript, React, Microservices, Azure, ASP.NET Core Web API, Agile, Azure SQL, Programmer, Full Stack Developer, Architect, Softwareentwickler, Entwickler, .NET Software Engineer)
Our client is an award winning Microsoft consultancy. They specialise in delivering innovative .NET technology based business solutions to investment banks, financial services companies, prestigious music/media label and many more. They are about to embark on one of the most ambitious .NET development projects since the birth of the .NET framework.
We are seeking several .NET Software Engineer with an extensive array of talent and expertise. .NET Software Engineer will be given complete ownership of your business area and the opportunity to work on the full project life cycle. .NET Software Engineer applicants should have a skill set that encompasses some or all of the following: .NET, .NET Core, C# and Azure SQL. Knowledge of software development methodologies is of interest (Agile, Scrum). My client will provide training in: .NET 10.0, ASP.NET Core, C# 14, Blazor, JavaScript, React, Microservices, Azure, ASP.NET Core Web API, MongoDB, Azure, AWS, Node.js and Elasticsearch.
This is a truly exciting project, one which if you are given the opportunity to work on will do wonders for your CV and boost you into the IT super league!
Our client is looking to secure and retain the services of the very best .NET Software Engineer candidates on the market place, as such they are offering a challenging role and working environment, industry recognized training, guaranteed career progression and above market rate salaries.
Location: Braunschweig, Germany / Remote Working
Salary: €75.000 - €95.000 + Bonus + Benefits
Applicants must be based in Germany and have the right to work in Germany even though remote working is available.
Noir continues to be the leading Microsoft recruitment agency; we can help you make the right career decisions!
NOIRGERMANYRECSPNOIRGERMANYRECNOIREUROPEREC
NC/CM/BRA7595....Read more...
An opportunity has arisen for a Software Developer / Software Engineer to join an innovative technology organisation delivering complex software solutions for customers across a specialist technical environment.
As a Software Developer / Software Engineer, you will design, develop and maintain high-performance backend solutions using C++ and Java in Linux environments, working with customers and internal teams to deliver reliable, scalable software.
This role offers up to £78,000, with a relocation package considered for the right candidate, plus benefits. Please only apply if you have right to work in the UK and valid SC security clearance which must be held at the time of application.
You will be responsible for:
* Designing, developing and maintaining backend applications using C++ and Java within Linux environments.
* Leading the technical development of software components, services and APIs.
* Producing reliable, scalable and maintainable code with a strong focus on performance and security.
* Providing technical guidance and mentoring to junior and mid-level developers.
* Contributing to software architecture, technical decisions and development roadmaps.
* Reviewing code and promoting consistent engineering standards and development practices.
* Diagnosing and resolving complex software issues, including problems involving third-party dependencies and customer libraries.
* Building and supporting RESTful APIs, microservices and distributed applications.
* Using static analysis, profiling and debugging tools to improve software quality and performance.
* Containerising applications with Docker to support deployment and scalability.
* Contributing to CI/CD pipelines and DevSecOps processes.
The candidates from the following background will be considered:
* Software Developer, Software Engineer, Backend Engineer, Backend Developer, Backend Software Engineer, C++ Developer, C++ Software Engineer, Backend Software Developer or in a similar role.
What we are looking for:
Essential:
* Previously worked as a Software Developer or in a similar role.
* Valid SC security clearance at the time of application.
* Approx. 5 years of commercial software development experience using or C++ with some Java, ideally within Linux-based environments.
* A degree in Computer Science, Software Engineering or related discipline, or equivalent practical experience.
* Experience investigating, diagnosing and improving software performance within Linux environments.
* Strong knowledge of software architecture, design patterns and object-oriented programming.
* Background in developing enterprise-level backend applications, APIs and distributed systems.
* Understanding of multithreading and concurrent application development.
* Knowledge of software debugging and diagnostic techniques.
* Experience working with Agile development environment & relational and/or NoSQL databases.
Desirable:
* Familiarity with Docker and application containerisation.
* Understanding of Git and version control & CI/CD technologies such as Jenkins, GitLab CI/CD or Azure DevOps.
Whats on offer:
* Competitive Salary
* 25 days of annual leave plus bank holidays.
* Healthcare coverage
* Cycle to Work scheme
* Company electric vehicle scheme
* Company pension contributions
* Dedicated training and development support
* Opportunities for continued career progression
This is an excellent opportunity for a Software Developer / Software Engineer looking for a technically challenging role and take their career further.
Important Information: We endeavour to process your personal data in a fair and transparent manner. In applying for this role, Additional Resources will be acting in your best interest and may contact you in relation to the role, either by email, phone or text message. For more information see our Privacy Policy on our website. It is important you are aware of your individual rights and the provisions the company has put in place to protect your data. If you would like further information on the policy or GDPR please contact us.
Additional Resources Ltd is an Employment Business and an Employment Agency as defined within The Conduct of Employment Agencies & Employment Businesses Regulations 2003.
....Read more...
.NET Software Engineer - Fastest-Growing Internet Co Ever – Magdeburg, Germany
(Tech stack: .NET Software Engineer, .NET 10.0, ASP.NET Core, C# 14, Azure, Angular 21, Vue.js, TypeScript, Multithreading, RESTful, ASP.NET Core Web API, EF Core 10.0, Programmer, Full Stack Developer, Architect, Softwareentwickler, Entwickler, .NET Software Engineer)
Our client is changing the way merchants and consumers connect with each other worldwide, and the change has barely started. In 2024, they were the fastest-growing internet company ever, and they drove more than €4 billion in revenue to local businesses. As they continue to evolve, their vision is to become the operating system for local commerce by providing an integrated suite of tools and services for local businesses to help them understand their customers better, compete effectively, and increase profits.
To help them on this mission, they are looking for .NET Software Engineer to work on the development of complex Greenfield software applications. .NET Software Engineer applicants should have detailed knowledge of: .NET, .NET Core, C# and Azure SQL. Our client can provide you with training into: .NET 10.0, C# 14, Azure, Angular 21, Vue.js, TypeScript, Multithreading, RESTful, ASP.NET Core Web API, EF Core 10.0, Solid, DRY, LINQ and MongoDB.
These positions come with an extensive benefits package including bonuses, stock options and a training budget.
Location: Magdeburg, Germany / Remote Working
Salary: €70.000 - €90.000 + Bonus + Benefits
Applicants must be based in Germany and have the right to work in Germany even though remote working is available.
Noir continues to be the leading Microsoft recruitment agency; we can help you make the right career decisions!
NOIRGERMANYRECSPNOIRGERMANYRECNOIREUROPEREC
NC/CM/MAG7090....Read more...
This Maintenance Engineer role is based in Sheffield. The role is working with a major leading UK manufacturer and offers a fantastic base salary of £47,846 plus excellent industry benefits, career development and further training opportunities.The working hours are days only, 10am - 6pm Monday to Thursday, and 8am to 4pm on Friday. Further to this, there is also a bonus & overtime is also paid at a premium.The successful Maintenance Engineer will benefit from:
A base salary of £47,846 per annum, plus bonus, overtime also available at a minimum of x 1.5, x 2
Monday to Friday - DAYS ONLY (10am to 6pm / Friday 8am-4pm)
Training programs, advanced qualifications and career development opportunities etc
Key Responsibilities of Maintenance Engineer :
Carry out Planned Preventative Maintenance, Inspections, Service and Repairs
Welding and Fabrication skillset
Support process improvement throughout the factory
Responsible for plant wide proactive and reactive mechanical maintenance activities to ensure the optimum performance of the site
Qualifications & Experience of Maintenance Engineer :
Applicants must hold recognised Engineering qualifications. These are either an Advanced Apprenticeship & or; Level 3 NVQ in Engineering with BTEC Level 3 in Engineering or above, City & Guilds in Engineering/Craft studies 1-2 & 3
Demonstrable knowledge & expertise in PPM and reactive maintenance on Industrial Plant & Equipment.
High degree of Health & Safety awareness.
In return, you will be offered a truly varied role within a dynamic and a fast-paced business, providing opportunities to develop your skill sets and progress your career as a Maintenance Engineer....Read more...
An opportunity has arisen for a Network Engineer to join an innovative technology organisation delivering complex software solutions for customers across a specialist technical environment.
As a Network Engineer, you will help maintain and improve enterprise network infrastructure, supporting reliable, secure and high-performing IT services. This full-time role offers salary up to £78,000 and benefits.
Note: Valid DV clearance is essential for this role.
You will be responsible for:
* Supporting network security measures, including firewalls, VPNs, access controls and secure connectivity.
* Keeping network diagrams, technical documentation and operational procedures up to date.
* Contributing to capacity planning, performance improvements and network resilience.
* Supporting virtualised and software-defined networking environments.
* Assisting with automation and Infrastructure as Code activities where appropriate.
* For more experienced engineers, taking ownership of technical workstreams, supporting junior colleagues and contributing to network design decisions.
* Travelling to company premises or other locations when required.
* Keeping technical knowledge up to date through relevant training and professional development.
What we are looking for:
Essential:
* Previously worked as a Network Engineer or in a similar role.
* Valid DV clearance.
* Knowledge of networking fundamentals, including TCP/IP, Routing & switching, VLANs, DNS & DHC and Network troubleshooting methodologies.
* Background in supporting enterprise network environments.
* Familiarity with one or more networking technologies or vendors, such as Cisco, Juniper, Arista, HPE or Fortinet.
* Understanding of network security principles and good practice.Ability to communicate effectively with technical and non-technical stakeholders.
Desirable:
* Experience with routing protocols such as OSPF, BGP, EIGRP, or MPLS, firewall technologies and VPN solutions.
* Understanding of wireless networking technologies.
* Background with virtualisation platforms such as VMware ESXi, Hyper-V, KVM, or Proxmox.
* Knowledge of cloud networking concepts across AWS, Azure or hybrid environments.
* Familiarity with network automation tools such as Ansible, Python, Terraform or similar technologies.
* Experience working with network monitoring and management platforms such as SolarWinds, Zabbix, PRTG, LibreNMS or equivalent.
* Knowledge of Software Defined Networking (SDN) and modern data centre networking technologies.
Whats on offer:
* Competitive Salary
* 25 days of annual leave plus bank holidays
* AXA Healthcare cover
* Access to a Cycle to Work scheme
* Company EV Car Scheme
* Company pension contributions
* Dedicated training package and budget, with opportunities for career development and progression
If you are an experienced Network Engineer looking for a technically challenging role, this is a great opportunity to take your career further. Apply today to be considered.
Important Information: We endeavour to process your personal data in a fair and transparent manner. In applying for this role, Additional Resources will be acting in your best interest and may contact you in relation to the role, either by email, phone or text message. For more information see our Privacy Policy on our website. It is important you are aware of your individual rights and the provisions the company has put in place to protect your data. If you would like further information on the policy or GDPR please contact us.
Additional Resources Ltd is an Employment Business and an Employment Agency as defined within The Conduct of Employment Agencies & Employment Businesses Regulations 2003.
....Read more...
Embedded Software Engineer – C / FreeRTOS
Are you an experienced Embedded Software Engineer with strong C programming and FreeRTOS experience, looking to work with innovative touch technologies?
This company specialises in developing bespoke hardware and firmware silicon devices. Their products serve the automotive and industrial sectors, providing cutting-edge solutions that ensure high-quality customer integration.
They are seeking a talented Embedded Software Engineer to join their engineering team in Fareham, UK, contributing to the development of their next-generation technology.
Responsibilities of this Embedded Software Engineer – C / FreeRTOS job based in Fareham:
Design and implement embedded software: Develop efficient, low-level code in C for microcontrollers and embedded systems, ensuring optimal performance, resource usage and reliability.
FreeRTOS development: Develop and maintain embedded software using FreeRTOS, working with real-time operating system concepts and ensuring reliable system performance.
Debugging and testing: Use debugging tools and methods, such as JTAG and oscilloscopes, to troubleshoot hardware/software interactions, optimise code and perform system validation through unit and integration testing.
Develop new features: Contribute to the development of new features and functionality to meet market requirements on RISC-V-based platforms.
Requirements of this Embedded Software Engineer – C / FreeRTOS job based in Fareham:
Bachelor’s degree in Electronics, Physics or a related field, with a 2:1 classification or higher.
Proven practical experience in embedded C programming.
Experience working with FreeRTOS or another real-time operating system.
Must have experience with GIT/Source control.
Proficient in software unit testing and able to demonstrate a strong aptitude for numeracy.
Working knowledge of ISO9000 standards and version control systems.
Experience with USB firmware and low-level USB protocols would be highly desirable.
To apply for this Embedded Software Engineer – C / FreeRTOS job based in Fareham, please email NDrain@redlinegroup.Com or call Nick on 01582 878828 / 07487 756328.....Read more...
FLEXIBLE WORKING HOURS + 35 HOLIDAYS + REGULAR OVERTIME + HIGH ENG & MODERN MACHINES + COMPLEX MANUFACTURINGDue to continued demand of their services, this employer is actively searching for a Production Engineer to join their skilled engineering team on a permanent basis.As this ROCHDALE based employer is just minutes from the M62, the successful Production Engineer will easily be able to commute from surrounding towns & cities including Oldham, Bury, Halifax, Middleton, Huddersfield and Manchester.For the Production Engineer position, we are keen to receive applications from individuals who possess:
Formal qualifications within a Mechanical Engineering or Machining focused discipline (Apprenticeship, NVQ/City & Guilds/BTEC Level 3, HNC, HND or similar)
Strong CNC Machining skills and knowledge – ideally an accomplished Machinist who has progressed into an Offline Programming or similar position
The ability to create bespoke CNC programs from scratch using CAD/CAM software (all packages considered – SolidCAM experience is advantageous)
IDEAL NOT ESSENTIAL: Previous experience spent working in a Heavy Engineering environment
Working Hours of the Production Engineer: Day shifts with a 39-hour minimum weekly contract; the successful candidate will be offered flexibility around start & finish times between the below times (latest start time 8.30am):
Monday to Thursday – 06:00 to 18:00
Friday – 06:00 to 15:00
On offer to the successful Production Engineer:
Starting Salary: Up to £45,000.00 / £22.18 per hour
Holiday Entitlement: 35 days including public holidays
Option to work regular midweek and Saturday morning overtime:
150% paid between 39-48 hours worked
200% paid after 48 hours worked
To apply for the Production Engineer position, please click “Apply Now” and attach a copy of your CV. Alternatively, please contact Callum Good at E3 Recruitment for more information....Read more...
An opportunity has arisen for a Software Developer / Software Engineer to join an innovative technology organisation delivering complex software solutions for customers across a specialist technical environment.
As a Software Developer / Software Engineer, you will design, develop and maintain high-performance backend solutions using C++ and Java in Linux environments, working with customers and internal teams to deliver reliable, scalable software.
This role offers up to £78,000, with a relocation package considered for the right candidate, plus benefits. Please only apply if you have right to work in the UK and valid SC security clearance which must be held at the time of application.
You will be responsible for:
* Designing, developing and maintaining backend applications using C++ and Java within Linux environments.
* Leading the technical development of software components, services and APIs.
* Producing reliable, scalable and maintainable code with a strong focus on performance and security.
* Providing technical guidance and mentoring to junior and mid-level developers.
* Contributing to software architecture, technical decisions and development roadmaps.
* Reviewing code and promoting consistent engineering standards and development practices.
* Diagnosing and resolving complex software issues, including problems involving third-party dependencies and customer libraries.
* Building and supporting RESTful APIs, microservices and distributed applications.
* Using static analysis, profiling and debugging tools to improve software quality and performance.
* Containerising applications with Docker to support deployment and scalability.
* Contributing to CI/CD pipelines and DevSecOps processes.
The candidates from the following background will be considered:
* Software Developer, Software Engineer, Backend Engineer, Backend Developer, Backend Software Engineer, C++ Developer, C++ Software Engineer, Backend Software Developer or in a similar role.
What we are looking for:
Essential:
* Valid SC security clearance at the time of application.
* Approx 5 years of commercial software development experience using or C++ with some Java, ideally within Linux-based environments.
* A degree in Computer Science, Software Engineering or related discipline, or equivalent practical experience.
* Experience investigating, diagnosing and improving software performance within Linux environments.
* Strong knowledge of software architecture, design patterns and object-oriented programming.
* Background in developing enterprise-level backend applications, APIs and distributed systems.
* Understanding of multithreading and concurrent application development.
* Knowledge of software debugging and diagnostic techniques.
* Experience working with Agile development environment & relational and/or NoSQL databases.
Desirable:
* Familiarity with Docker and application containerisation.
* Understanding of Git and version control & CI/CD technologies such as Jenkins, GitLab CI/CD or Azure DevOps.
Whats on offer:
* Competitive Salary
* 25 days of annual leave plus bank holidays.
* Healthcare coverage
* Cycle to Work scheme
* Company electric vehicle scheme
* Company pension contributions
* Dedicated training and development support
* Opportunities for continued career progression
This is an excellent opportunity for a Software Developer looking for a technically challenging role and take their career further.
Important Information: We endeavour to process your personal data in a fair and transparent manner. In applying for this role, Additional Resources will be acting in your best interest and may contact you in relation to the role, either by email, phone or text message. For more information see our Privacy Policy on our website. It is important you are aware of your individual rights and the provisions the company has put in place to protect your data. If you would like further information on the policy or GDPR please contact us.
Additional Resources Ltd is an Employment Business and an Employment Agency as defined within The Conduct of Employment Agencies & Employment Businesses Regulations 2003.
....Read more...
Reading | Hybrid Working | Mission Critical Projects - Data Centres Principal Electrical Design Engineer opportunity with a leading building services consultancy delivering some of the UK's most complex and high-profile Data Centre projects.An exciting opportunity has arisen for a Principal Electrical Design Engineer to join a growing team delivering some of the UK's most complex and high-profile Data Centre projects. With a strong pipeline of secured work and continued growth across the mission-critical sector, this role offers the opportunity to lead the design and delivery of technically challenging projects while influencing the development of future-ready, resilient infrastructure. This position is ideally suited to an experienced Electrical Design Engineer who has a proven track record working on Data Centre projects and is looking to take a leading role within a collaborative and technically focused environment. The Role As a Principal Electrical Design Engineer, you will lead the electrical design of major Data Centre developments from concept through to completion. You will work closely with multidisciplinary teams, providing technical leadership, ensuring design excellence, and supporting the successful delivery of critical infrastructure projects. Key Responsibilities:Lead electrical building services design on complex Data Centre projects.Manage project delivery through all design stages.Produce and review technical calculations, reports and specifications.Coordinate with mechanical, public health and specialist engineering teams.Provide mentorship and technical guidance to junior engineers.Engage with clients, contractors and wider project stakeholders.Ensure designs meet industry standards, regulations and project requirements.Support innovation, sustainability and design excellence across projects.About YouExperience operating at Senior or Principal Engineer level within Building Services.A minimum of two years' experience working on Data Centre projects is essential.Strong technical knowledge of electrical building services design.Experience within a consultancy environment delivering complex projects.Knowledge of critical infrastructure, including power distribution, UPS systems, standby generation and resilience strategies.Proficiency with industry-standard design software including Revit and AutoCAD.Excellent communication and leadership skills.Degree qualified in Electrical Engineering or Building Services Engineering.Chartered Engineer status, or working towards Chartership, would be advantageous.What's On OfferThe opportunity to work on industry-leading Data Centre projects.A collaborative and supportive working environment.Clear progression opportunities towards Associate level and beyond.Flexible and hybrid working arrangements.Ongoing professional development and Chartership support.Exposure to some of the most technically challenging projects in the market.Competitive salary and comprehensive benefits package.Why Join? The demand for Data Centre infrastructure continues to grow rapidly, creating opportunities to work on projects at the forefront of digital and critical infrastructure development. This role offers the chance to make a genuine impact, develop specialist expertise and contribute to the successful delivery of landmark projects across the sector. Apply Now If you have 2+ years' Data Centre project experience and are looking for your next challenge as a Principal Electrical Design Engineer, we'd love to hear from you.About Energi People Having spent 20 years earning trust across MEP building services, structural and mission-critical engineering with the very best construction engineering firms in the UK, UAE, USA and beyond, we know the disciplines, the best employers, and crucially, the roles that aren’t advertised. Find out more at https://energipeople.com/....Read more...
An opportunity has arisen for an Infrastructure Engineer to join an innovative technology organisation delivering complex software solutions for customers across a specialist technical environment.
As an Infrastructure Engineer, you will design, implement, maintain and support IT infrastructure while contributing to project delivery, automation and continuous improvement. This role offers salary £78,000 and benefits.
Note: Valid DV clearance is essential for this role.
You will be responsible for:
* Design, plan and implement physical and virtual IT infrastructure solutions.
* Deliver infrastructure projects in line with agreed customer requirements and timescales.
* Maintain and support existing IT infrastructure and deployed systems.
* Diagnose and resolve infrastructure faults and technical issues efficiently.
* Monitor system performance and carry out routine maintenance, including backups, patching, vulnerability management and hardware/software upgrades.
* Prepare and maintain accurate technical documentation for supported infrastructure.
* Record significant incidents, investigations and actions taken to resolve issues.
* Create and maintain scripts and automation tools to streamline routine system administration tasks.
What we are looking for:
Essential:
* Previously worked as an Infrastructure Engineer or in a similar role.
* Valid DV clearance.
* Experience within systems administration and IT infrastructure support.
* A degree in Computer Science, Software Engineering or related discipline, or equivalent practical experience.
* Background leading or taking ownership of IT project delivery.
* Strong knowledge of networking technologies and equipment, including Cisco, Juniper, HP and Dell.
* Good understanding of TCP/IP, DNS, DHCP and related networking protocols.
* Familiarity with virtualisation technologies such as VMware and Hyper-V.
* Practical knowledge of Ansible/AWX, Python, PowerShell and BASH for scripting or infrastructure automation.
* Experience managing and supporting Microsoft and Linux environments.
* Knowledge of backup technologies, including NetBackup and Veeam.
Desirable:
* Background working in an Agile team.
* Understanding and use of Source Control (Gitlab, BitBucket).
Whats on offer:
* Competitive Salary
* 25 days of annual leave plus bank holidays
* AXA Healthcare cover
* Access to a Cycle to Work scheme
* Company EV Car Scheme
* Company pension contributions
* Dedicated training package and budget, with opportunities for career development and progression
If you are an experienced Infrastructure Engineer looking for a technically challenging role, this is a great opportunity to take your career further. Apply today to be considered.
Important Information: We endeavour to process your personal data in a fair and transparent manner. In applying for this role, Additional Resources will be acting in your best interest and may contact you in relation to the role, either by email, phone or text message. For more information see our Privacy Policy on our website. It is important you are aware of your individual rights and the provisions the company has put in place to protect your data. If you would like further information on the policy or GDPR please contact us.
Additional Resources Ltd is an Employment Business and an Employment Agency as defined within The Conduct of Employment Agencies & Employment Businesses Regulations 2003.
....Read more...
.NET Software Engineer, C# 14, .NET 10.0 - Groningen, Netherlands
(Tech stack: .NET Software Engineer, .NET 10.0, ASP.NET Core, C# 14, Azure SQL, .NET MAUI, GitHub Copilot, Docker, Kubernetes, Microservices architecture, Angular 21, Vue.js, TypeScript, Programmer, Full Stack Developer, Architect, Ontwikkelaar, .NET Software Engineer, Urgent)
Have you ever thought about getting from Amsterdam to Eindhoven in 30 minutes? My client, a world leader in aerospace technology, and has decided to undertake research into a subsonic train transportation system similar to Hyperloop. Hyperloop and other subsonic transportation systems like this are essentially a futuristic train like mode of transport that have the ability to travel at speeds of over 700mph.
Their R&D centres in the Netherlands are in need of some talented .NET Software Engineer to help build the software applications and cloud platforms that they need to run advanced data analytics and capture information from the high speed tests that they are running on a daily basis. .NET Software Engineer applicants should have knowledge of: .NET, .NET Core, C# and Azure SQL. They will provide training into: .NET 10.0, ASP.NET Core, C# 14, Azure SQL, .NET MAUI, GitHub Copilot, Docker, Kubernetes, Microservices architecture, Angular 21, Vue.js, TypeScript, Agile and MongoDB.
All positions come with the following benefits:
15% bonus.
Weekly office code competition.
5 days of brain-storming time per month.
Location: Groningen, Netherlands, Netherlands / Remote Working
Salary: €6.000 - €8.000 Per Month + Bonus + Benefits
Applicants must be based in the Netherlands and have the right to work in the Netherlands even though remote working is available.
Noir continues to be the leading Microsoft recruitment agency; we can help you make the right career decisions!
NOIRNETHERLANDSRECSPNOIRNETHERLANDSRECNOIREUROPEREC
NC/CM/GRO7595....Read more...
.NET Software Engineer, C# 14, .NET 10.0 - Kassel, Germany
(Tech stack: .NET Software Engineer, .NET 10.0, ASP.NET Core, C# 14, Azure SQL, .NET MAUI, GitHub Copilot, Docker, Kubernetes, Microservices architecture, Angular 21, Vue.js, TypeScript, Programmer, Full Stack Developer, Architect, Softwareentwickler, Entwickler, .NET Software Engineer)
Have you ever thought about getting from Munich to Berlin in 30 minutes? My client, a world leader in aerospace technology, and has decided to undertake research into a subsonic train transportation system similar to Hyperloop. Hyperloop and other subsonic transportation systems like this are essentially a futuristic train like mode of transport that have the ability to travel at speeds of over 700mph.
Their R&D centres in Germany are in need of some talented .NET Software Engineer to help build the software applications and cloud platforms that they need to run advanced data analytics and capture information from the high speed tests that they are running on a daily basis. .NET Software Engineer applicants should have knowledge of: .NET, .NET Core, C# and Azure SQL. They will provide training into: .NET 10.0, ASP.NET Core, C# 14, Azure SQL, .NET MAUI, GitHub Copilot, Docker, Kubernetes, Microservices architecture, Angular 21, Vue.js, TypeScript, Agile and MongoDB.
All positions come with the following benefits:
15% bonus.
Weekly office code competition.
5 days of brain-storming time per month.
Location: Kassel, Germany / Remote Working
Salary: €65.000 - €85.000 + Bonus + Benefits
Applicants must be based in Germany and have the right to work in Germany even though remote working is available.
Noir continues to be the leading Microsoft recruitment agency; we can help you make the right career decisions!
NOIRGERMANYRECSPNOIRGERMANYRECNOIREUROPEREC
NC/CM/KAS6585....Read more...
Lead Engineer – FM Service Provider – Moorgate, London - £55,000 per annumCBW are working with a leading Facilities Management provider who are seeking an experienced Lead Engineer to oversee engineering operations within a newly refurbished commercial building in Moorgate, Central London. This impressive corporate property offers a modern, high-quality working environment with upgraded building services and excellent occupier facilities, providing an exciting opportunity to take a leading technical role within a prestigious City location. This is an excellent opportunity for a technically strong engineer with previous leadership experience to take responsibility for the day-to-day engineering delivery across a large, modern corporate environment. The building offers premium office accommodation, extensive external terraces, landscaped communal areas and first-class occupier facilities, supported by modern, sustainability-focused building services. Working Hours: Monday to Friday, 8:00am – 5:00pm (40-hour week)Key ResponsibilitiesAct as the lead engineer on site, ensuring the efficient delivery of planned preventative and reactive maintenanceProvide day-to-day support and technical guidance to the on-site engineerCoordinate and supervise specialist contractors carrying out maintenance and project worksManage the permit-to-work system and review RAMS before works commenceEnsure full compliance with statutory regulations, health & safety legislation and company proceduresMonitor service delivery through CAFM systems, ensuring maintenance records are accurate and up to dateCarry out fault finding, diagnostics and repairs across electrical and mechanical building servicesBuild and maintain strong working relationships with the client, occupiers and key stakeholdersSupport small project works and identify opportunities for continuous improvementAssist the Account Manager with quotations, technical recommendations and contractor managementMonitor KPIs and SLAs, ensuring contractual obligations are consistently achievedCarry out regular site inspections to maintain engineering standards and complianceRequirementsCity & Guilds Level 2/3 (Electrical or Mechanical) or equivalent recognised qualificationPrevious experience as a Lead Engineer, Shift Leader or Senior Engineer within Facilities ManagementStrong knowledge of commercial building services and M&E maintenanceExperience overseeing subcontractors and ensuring site complianceFamiliarity with CAFM systems and maintenance reportingExcellent communication and client-facing skillsA proactive, organised approach with strong technical and problem-solving abilitiesAbility to work independently while supporting the wider contract team....Read more...
We are partnered with a technology-led product development business in Marlow, Buckinghamshire, that designs and delivers sophisticated electronic products used by customers around the world.
As part of their ongoing growth, they are looking for an Electronic Design Engineer to join an established hardware team working across the full product development lifecycle, from early concept work through to production and ongoing product improvement.
In this Electronic Design Engineer role, you will:
Design and develop analogue and digital electronic hardware for commercial products
Take ownership of designs from initial requirements through to production release and ongoing support
Carry out hardware debugging, fault finding, testing, and performance analysis
Work closely with software, systems, manufacturing, and product teams to deliver high-quality products to market
The ideal Electronic Design Engineer will have:
Experience designing and delivering commercial electronic products
Strong analogue design and hardware debugging skills
Knowledge of embedded systems and mixed-signal electronics
Experience within consumer electronics, embedded systems, communications, audio, or other high-performance electronic products
This is an excellent opportunity to join a collaborative engineering environment where you'll have genuine influence over product development, work alongside experienced engineers, and contribute to products used by customers worldwide.
If you’re interested in this Electronic Design Engineer role in Marlow, Buckinghamshire, apply now or contact Ed at efrost@redlinegroup.Com or 01582 878819 for more information.....Read more...
BMS Shift Engineer - Kings Cross, London - Up to £48,000 Are you an experienced BMS engineer looking for a new role? Would you like to work on a static site? CBW has a new opportunity for an experienced BMS Shift Engineer to join a leading FM company on a permanent basis. You will be responsible for the service & maintenance of BMS components and equipment, including sensors, controllers, actuators, and software systems. This role is based in Kings Cross on a large site. The successful candidate will have a strong understanding of Facilities Maintenance and have a proven track record in building maintenance. In return, the company is offering a competitive salary of up to £48,000, overtime, further training and a route into further career progression. Benefits:Salary of up to £48,00020 days shift holidayTons of Overtime availableGenuine career progressionHours of work:2 Days, 2 Nights, 4 off7:30 am to 7:30 pm - Days7:30 pm to 7:30 am - NightsKey responsibilities:Carry out maintenance checks on Trend, Tridium and Distech BMS’s on site.Provide technical assistance and support to clients regarding their BMS systems.Identify opportunities for improvement/remedial works to improve the performance of the BMS’s for our clients.Prepare proposals and quoting of works as required.Requirements:City & Guild / BTec / NVQ Electrical.Extensive knowledge & experience of BMS / HVAC.Minimum of 1-2 years experience with BMS systemsKnowledge & experience with either Trend, Tridium Controls/Niagara/Distech/Siemens (not all are required as training will be provided)Ability to read and interpret Electrical & Mechanical schematic diagrams.Understanding of IT networks.Good working knowledge of AutoCAD.Full UK driving licence.Controls training/experience.Experience with fault finding in electrical panels.Report writing skills.If you are interested in this position, please send your CV to Archie Reed of CBW Staffing Solutions for more information....Read more...
