Field Service Engineer
Maidstone
£35,000 - £40,000 Basic + Product Training + Overtime + Mobile + Pension + Benefits + Immediate Start
Are you a skilled Field Service Engineer looking to join a company that genuinely looks after its engineers? This is a fantastic opportunity to join a leading German manufacturer where your skills are valued, your development is supported, and you can significantly increase your earnings through regular overtime.
This Field Service Engineer will receive full product training and ongoing technical support, giving you the confidence to work on a specialist range of mechanical equipment across the UK. The company understands the importance of investing in its engineers, providing the training needed to develop your technical knowledge while giving you the opportunity to earn well through regular overtime.
If you're looking for a Field Service Engineer role where you're treated well, properly trained, and rewarded for your time, this could be the perfect opportunity for you.
Your Role As A Field Service Engineer:
Covering Kent and surrounding areas
Mechanical servicing, maintenance and breakdowns of equipment
Electrical fault finding
Full hands-on product training provided
UK-wide travel when required, with overtime available to maximise earnings
The Successful Field Service Engineer Will Have:
A mechanical background (Hydraulics, Motors, Gearboxes)
Car mechanics wanting a step into engineering will be consierdd
Some electrical fault-finding skills - be able to use a multimetre!
Commutable to and around Kent
Please apply and contact Georgia Daly or Billy on 07458163030 for immediate consideration
Keywords: Mechanical Fitter, Field Service Engineer, Cranes, Mechanical, Hydraulics, Material Handling, Forklift, Heavy Plant, mechanic, car, HGV, FLT, Fork Lift, Plant Equipment, Construction Equipment, Middlesbrough, Stockton-on-Tees, Darlington, York, Scarborough
This vacancy is being advertised by Future Engineering Recruitment Ltd. The services of Future Engineering Recruitment Ltd are that of an Employment Agency. Future Engineering Recruitment Ltd We can only accept applications from candidates who have a valid legal permit or right to work in the United Kingdom. Potential candidates who do not have this right or permit or are pending an application to obtain this right or permit should not apply as your details will not be processed.....Read more...
Field Service Engineer
Leicester
£35,000 - £40,000 Basic + Product Training + Overtime + Mobile + Pension + Benefits + Immediate Start
Are you a skilled Field Service Engineer looking to join a company that genuinely looks after its engineers? This is a fantastic opportunity to join a leading German manufacturer where your skills are valued, your development is supported, and you can significantly increase your earnings through regular overtime.
This Field Service Engineer will receive full product training and ongoing technical support, giving you the confidence to work on a specialist range of mechanical equipment across the UK. The company understands the importance of investing in its engineers, providing the training needed to develop your technical knowledge while giving you the opportunity to earn well through regular overtime. If you're looking for a Field Service Engineer role where you're treated well, properly trained, and rewarded for your time, this could be the perfect opportunity for you.
Your Role As A Field Service Engineer:
Covering Leicester and surrounding areas
Mechanical servicing, maintenance and breakdowns of equipment
Electrical fault finding
Full hands-on product training provided
UK-wide travel when required, with overtime available to maximise earnings
The Successful Field Service Engineer Will Have:
A mechanical background (Hydraulics, Motors, Gearboxes)
Car mechanics wanting a step into engineering will be consierdd
Some electrical fault-finding skills - be able to use a multimetre!
Commutable to and around Leicester
Please apply and contact Georgia Daly or Billy on 07458163030 for immediate consideration
Keywords: Mechanical Fitter, Field Service Engineer, Cranes, Mechanical, Hydraulics, Material Handling, Forklift, Heavy Plant, mechanic, car, HGV, FLT, Fork Lift, Plant Equipment, Construction Equipment, leicester, coventry, corby, peterborough, nottingham
This vacancy is being advertised by Future Engineering Recruitment Ltd. The services of Future Engineering Recruitment Ltd are that of an Employment Agency. Future Engineering Recruitment Ltd We can only accept applications from candidates who have a valid legal permit or right to work in the United Kingdom. Potential candidates who do not have this right or permit or are pending an application to obtain this right or permit should not apply as your details will not be processed.....Read more...
Senior Process Development Engineer required to consult a broad range of metallic processing clients in various metal industry sectors including automotive, aerospace, packaging and construction.
Skills
Metallurgy knowledge ideally of aluminium alloy applications, products and processes.
Degree level or equivalent in Materials Science, Engineering or Metallurgy.
Sustainability and life cycle assessment techniques.
Process-cost modelling.
Numerical, data processing and analysis skills.
As a Senior Process Development Engineer, you will leverage your technical and practical experience to enable world class client performances. As part of an international team of metallurgy, metal forming, thermomechanical processing, surfaces and coatings technology, materials characterisation and analysis and process modelling experts you will consult on process or product development, research and technical problem resolution.
This is an amazing opportunity to work at the cutting edge of metallurgy on the global stage.....Read more...
Senior Process Development Engineer required to consult a broad range of metallic processing clients in various metal industry sectors including automotive, aerospace, packaging and construction.
Skills
Metallurgy knowledge ideally of aluminium alloy applications, products and processes.
Degree level or equivalent in Materials Science, Engineering or Metallurgy.
Sustainability and life cycle assessment techniques.
Process-cost modelling.
Numerical, data processing and analysis skills.
As a Senior Process Development Engineer, you will leverage your technical and practical experience to enable world class client performances. As part of an international team of metallurgy, metal forming, thermomechanical processing, surfaces and coatings technology, materials characterisation and analysis and process modelling experts you will consult on process or product development, research and technical problem resolution.
This is an amazing opportunity to work at the cutting edge of metallurgy on the global stage.....Read more...
Field Service Engineer
Sheffield
£30,000 - £40,000 Basic + Optional Overtime + Company Van + Fuel Card + Door-to-Door + Holiday + Birthday Day Off + Pension + OEM Training + Family Feel + Work-Life Balance + Long-Term Stability + Job Satisfaction + Immediate Start + Package + Monday - Friday + Local Patch + Social Events
Solidify your career now as a Field Service Engineer with a family-feel business where you are genuinely valued and listened to. This is a fantastic opportunity to join a friendly and growing company within the commercial coffee industry, where you will be given full training on a range of traditional and bean-to-cup coffee machines. You will benefit from full on-the-job training to do your job to the best of your ability and have everyday job satisfaction. Enjoy a great work-life balance with a Monday - Friday role with no weekends.
This company operates within the coffee industry and has a strong focus on making positive changes for their staff, creating a supportive environment where you can build a long-term career without feeling like just another number. As a Field Service Engineer, you will be responsible for attending commercial customer sites to carry out servicing, repairs, PPMs and installations across a wide variety of coffee machines. You will also receive in-house training from experienced engineers, including barista training so you understand the machines, grinder adjustments and correct coffee recipes. Join now and secure a job for life accompanied by a generous package!
The Role Of The Field Service Engineer:
Service, repair, PPM and installation of coffee equipment - traditional and bean-to-cup machines
1-in-4 paid on-call rota with very low call-out frequency
Field Service Engineer role covering a local patch around Sheffield
Checking voltage and resistance, basic plumbing & electrical fault finding using a multimeter
Customer-facing work across restaurants, chains, offices, airports and other commercial environments
The Successful Field Service Engineer Will Have:
Electrical/mechanical Field Service Engineering background (Coffee is preferred)
Basic electrical fault-finding experience & confident using a multimeter to check voltage and resistance
Basic plumbing knowledge (desired)
Passionate about engineering and interested in learning about coffee machines
Commutable to cover a local patch around Sheffield
Keywords: Field Service Engineer, Coffee Machine Engineer, Coffee Machine Technician, Coffee Engineer, Catering Equipment Engineer, Commercial Coffee Machines, Bean-to-Cup, Traditional Coffee Machines, Espresso Machines, Coffee Grinders, Electrical Fault Finding, Multimeter, Voltage Testing, Resistance Testing, Mechanical Fault Finding, Plumbing, PPM, Preventative Maintenance, Installation, Commissioning, Breakdown Repairs, WMF, Schaerer, Franke, Thermoplan, Eversys, Liquidline, Bravilor Bonamat, Jura, La Cimbali, Rancilio, Nuova Simonelli, Sheffield, Rotherham, Barnsley, Chesterfield, Worksop, Dronfield, Doncaster, Mansfield, Matlock, Derby, Leeds, Wakefield, Huddersfield, South Yorkshire, West Yorkshire, Derbyshire, Nottinghamshire, Yorkshire, North Midlands.
Apply now or send your CV ....Read more...
Customer Integration Engineer – Gaming Platforms
Location: Crawley, West Sussex
Working Model: Hybrid
Employment Type: Permanent
Travel: Occasional travel to customers, internal sites and industry events
About the Role
We are looking for a Customer Integration Engineer to join a growing Customer Engineering team supporting the adoption of specialist gaming platforms, embedded systems and software solutions across EMEA and other strategic markets.
This is not a traditional technical support role. You will work directly with customers throughout the full integration journey, from initial evaluation and onboarding through to integration and production readiness. You will troubleshoot complex technical challenges, deliver technical demonstrations and workshops, and help customers successfully integrate platforms and bring their products to market.
You will also play an important role in improving the customer experience by developing integration tools, scripts, OS images, example applications and technical documentation. Working closely with Software, Firmware, FPGA, Product and Engineering teams, you will provide valuable customer feedback and help improve products, processes and integration capabilities.
Key Responsibilities for the Customer Integration Engineer
Work directly with customers throughout evaluation, onboarding, integration and production readiness.
Investigate and resolve complex issues across hardware, operating systems and software.
Troubleshoot Windows and Linux environments, including logs, drivers, services and configuration.
Support OS image creation, system configuration, peripherals and external device integration.
Deliver technical workshops, onboarding sessions, product demonstrations and technical guidance.
Develop and maintain integration tools, scripts, utilities and example code.
Support integration testing, benchmarking and system validation.
Create and maintain technical documentation and integration guides.
Work closely with Product and Engineering teams to escalate issues and provide actionable customer feedback.
Support pre-sales and technical marketing activities where required.
Identify opportunities to improve processes, tooling and the overall customer integration experience.
Required Skills & Experience
We are looking for a hands-on engineer with experience in a customer-facing technical role, such as Customer Integration Engineer, Integration Engineer, Solutions Engineer, Field Application Engineer (FAE), Technical Support Engineer or similar.
You will have strong troubleshooting skills across Windows and/or Linux, with experience working with logs, drivers, services and system configuration. Experience with embedded systems, industrial PCs or hardware/software integration is highly desirable.
You should also have working knowledge of software development, with experience in one or more languages such as C, C++, C#, Rust or Python, together with the ability to read, modify and create scripts or example code. Familiarity with interfaces including USB, serial, TCP/IP, PCIe and GPIO would be beneficial.
Excellent communication skills are essential, as you will be working with both technical and non-technical stakeholders. You will need to be able to manage multiple customer priorities, explain complex technical issues clearly and take ownership of problems through to resolution. Fluent English is required.
Desirable Experience
Experience within the gaming, regulated industries or embedded technology sectors would be advantageous. Knowledge of gaming systems, including Casino Management Systems, SAS protocols, meters, NVRAM, bill validators and regulatory requirements, would be particularly useful.
Additional experience with Linux or Windows IoT OS image creation, gaming and graphics engines such as Unity, Unreal, Godot or OpenGL, system security, secure boot or cryptography would be beneficial. Experience creating technical documentation, demonstrations or training materials is also desirable.
About You
You are a proactive, hands-on engineer who enjoys working closely with customers and solving real-world technical problems. You are equally comfortable troubleshooting complex issues, explaining solutions, developing tools and examples, and collaborating with cross-functional teams.
Rather than simply reacting to technical problems, you look for ways to improve processes, reduce integration challenges and help customers succeed faster. You will enjoy working in a fast-paced technology environment where your technical expertise and customer feedback can directly influence products and services.
Why Join?
This is an excellent opportunity to join a growing Customer Engineering and Technology function and play a visible role in helping customers successfully adopt innovative gaming and computing platforms.
You will work closely with customers, Product, Software, Firmware and Engineering teams, gaining exposure to a broad range of technologies while helping shape the tools, processes and solutions that support future growth.
The role offers hybrid working from Crawley, with occasional travel to customers, internal sites and industry events. If you are keen or would like to find out more information about this opportunity, please send a cv over to nking@redlinegroup.Com or call 01583 878839 for more information....Read more...
Electrical Tester Bristol £38,000 - £42,500 Basic + Overtime (OTE £60k) + Van + Paid Qualifications + Progression + Stability + Pension + Immediate StartAre you a qualified electrical tester or electrician looking to become an electrical tester looking for a long-term and rewarding role with a leading electrical contractor? If so, this is a fantastic opportunity to earn in excess of £60,000 with a company that values quality workmanship, professionalism, and employee development.As an electrical tester you'll carry out EICRs and remedial works across domestic and commercial properties, mainly within social housing and council contracts. This role offers job variety, independence, and the chance to progress within a well-established business that rewards commitment and technical excellence.Your Job As An Electrical Tester Will Include: * Carrying out fixed wiring testing (EICR) in domestic and commercial properties * Completing remedial works at time of testing and follow-up rewire programmes * Liaising with tenants and clients, delivering excellent customer service * Ensuring all work meets the latest electrical and safety regulationsAs An Electrical Tester You Will Have: * NVQ Level 3 or Similar * 2391 or AM2 * 18th Edition Wiring Regulations (C&G 2382) * Experience or desire to start a career in domestic and commercial EICR testing and remedial work * Strong knowledge of fault-finding and diagnostics * Excellent communication and customer service skills * Full UK driving licence and willingness to travel in and around BristolApply now or call Billy on 07458163030 for immediate consideration!
Keywords: Electrical Tester, Electrical Testing Engineer, Fixed Wire Tester, EICR Engineer, EICR Electrician, Electrical Inspection & Testing, Electrical Maintenance Engineer, 2391 Electrician, Approved Electrician, Testing & Inspection Electrician, Commercial Electrician, Domestic Electrician, Social Housing Electrician, Remedial Electrician, Rewire Electrician, Fault Finding Electrician, Electrical Compliance Engineer, NICEIC Electrician, 18th Edition Electrician, NVQ Level 3 Electrician, AM2 Electrician, Electrical Contractor, Property Maintenance Electrician, Housing Association Electrician, Council Contract Electrician, Mobile Electrician, Service Electrician, Building Services Engineer, Electrical Engineer, Bristol, Bath, Weston-super-Mare, Portishead, Clevedon, Yate, Thornbury, Gloucester, Swindon, South West....Read more...
Robotics Software Engineer – C++ / ROS2 / Linux
Are you an experienced Software Engineer with strong expertise in C++ and ROS2, combined with a background in robotics and Linux environments? Are you based in the Cambridge area, or interested in joining one of the UK’s leading centres for robotics and technology innovation?
If so, our client – an innovative tech-for-good start-up – is looking to hire a Robotics Software Engineer based in Cambridge, UK, supporting operations across both UK and EU teams.
Key responsibilities:
Design, develop, and test software systems for advanced robotic platforms using C++ & ROS 2.
Collaborate with electronics, mechatronics, and research teams within an Agile development environment
Test, debug, and validate software performance and reliability
Provide on-site support for physical robotic systems, including occasional travel to field locations
To be successful, you should have:
3 Years experience in an industry Software Design position.
A degree (or Master’s) in Software Engineering, Computer Science, or a related discipline
Strong commercial experience with C++ (C++14 or later) and Linux
Extensive hands-on experience with ROS2 (ROS1 knowledge also beneficial)
Experience with robotics software development and integration
This role offers a competitive salary and benefits package, alongside the opportunity to join a pioneering technology company with excellent career progression and profit-share potential.
To apply for this Robotics Software Engineer – C++ / ROS2 opportunity, please send your CV to NDrain@redlinegroup.Com or call 01582 878828....Read more...
Our client, a leading manufacturer of products for highly regulated industries including Marine, Medical, and more, are looking for an Electronic Engineer based in Newark to join their team on a permanent basis.
This is an office-based role supporting the development of innovative control panel and interface technologies for blue-chip customers across a range of industries.
Key responsibilities of the Electronic Engineer job based in Newark:
Support the design, development and testing of electronic hardware products.
Manage and implement hardware design changes driven by cost, obsolescence, or performance improvements.
Prepare technical specifications, reports, and documentation to a high professional standard.
Perform fault finding and debugging of electronic devices.
Conduct quality and reliability analysis (e.G. MTBF).
Support EMC testing and wider electrical validation activities.
Work closely with production and production engineering teams to resolve issues and drive improvements.
Experience required for the Electronic Engineer job based in Newark:
Degree qualified in Electrical/Electronic Engineering, Computer Engineering or similar.
Experience in an electronics design or manufacturing environment.
Experience designing analogue and digital circuits using tools such as Altium Designer.
Strong understanding of EMC design and compliance testing.
Experience with digital communication protocols (e.G. SPI, I2C, USB).
Strong documentation and reporting skills.
Ability to work independently and manage multiple tasks effectively.
Knowledge of programming languages (e.G. C/C#) and simulation tools (e.G. SPICE) would be advantageous.
If this Electronic Engineer job based in Newark could be of interest, please send your CV to jthompson@redlinegroup.Com or call James on 01582 878831....Read more...
Up to £45,000 Hours: 7:30am – 4:30pm Monday to Thursday / 2:00pm Friday, Holiday: 28 days, Permanent Position. Location Manchester
We are looking for an experienced Design Engineer to work on the design and development of bespoke police, emergency service and specialist vehicle conversions.
This is a varied role taking projects from initial concept through detailed design, prototype build and into production.
The company are a leading player in their market and due to company expansion, they are seeking a design engineer to join the team.
Key Responsibilities for the Design Engineer role:
Design bespoke vehicle conversion solutions for police and emergency service vehicles.
Produce detailed 2D and 3D CAD models and manufacturing drawings.
Design brackets, mounting systems, equipment installations and vehicle modifications.
Support electrical and electronic equipment integration.
Produce BOMs, technical specifications and engineering documentation.
Ensure designs meet customer requirements and relevant safety standards.
Work closely with production, procurement and installation teams.
Support prototype builds, testing and product validation.
Resolve manufacturing issues.
Manage engineering changes and drawing revisions.
We would welcome people to apply that have:
Previous experience as a Design Engineer within automotive, vehicle conversion, specialist vehicles or manufacturing.
Strong CAD experience using SolidWorks, Autodesk Inventor, CATIA or similar.
Experience producing manufacturing drawings and documentation.
Understanding of mechanical design, fabrication and manufacturing processes.
Knowledge of automotive electrical systems would be advantageous.
HNC, HND, Degree or equivalent engineering experience.
Experience within vehicle conversions or modifications would....Read more...
We have an Operations Engineer opportunity in Royston, Hertfordshire, which is perfect for someone looking to build their technical expertise in a varied, hands-on role, with excellent development prospects. It would suit a recent engineering graduate with some industry experience, or someone with equivalent skills and knowledge.
This Operations Engineer opportunity is to join a growing, technology-led business. You'll gain exposure to a wide range of engineering activities, supporting the performance, reliability and continuous improvement of specialist equipment across customer sites.
The Job:
Support the performance and reliability of technical equipment.
Investigate faults, troubleshoot issues and help deliver long-term solutions.
Assist with equipment installations, upgrades and improvements.
Work with engineering and production teams to enhance processes and equipment performance.
Support maintenance activities and ensure equipment remains operational.
Contribute to new installation and technical development projects.
About You:
We're looking for someone with a solid engineering foundation and a desire to learn, develop and take on increasing responsibility. Ideally, you'll have:
A degree in Mechanical, Electronic, Electrical, Mechatronic Engineering, or a related discipline.
Experience in an engineering, technical or operational environment.
A practical, hands-on approach to problem-solving.
Strong analytical skills and an interest in how equipment works.
A full UK driving licence and willingness to travel when required.
If you're looking for an Operations Engineer role in Royston, Hertfordshire and have engineering experience, we'd love to hear from you.
To apply for this Operations Engineer Job in Royston, Hertfordshire, please email RWilcocks@redlinegroup.Com or call Ricky on 01582878810
....Read more...
This is an exciting opportunity for a Product Specialist for someone with experience in construction, building materials or passive fire protection to play a key role in supporting our customers, developing product knowledge and driving continuous improvement across the business. Working closely with customers, internal teams and external stakeholders, you'll provide technical guidance on construction products throughout the construction journey – from initial research and specification through to installation and handover.What’s in it for you as a Product Specialist?
A Salary of £40,000
Annual KPI Bonus
Location - Morley area of Leeds
Monday – Friday Days working (8am-5pm)
33 days annual leave
Employee Welfare Program
Company Pension
What’s expected from you as a Product Specialist?
Providing Technical Support and enquires via phone and email to clients for Project specifications for consturction led solutions of Fire caverty
Being able to drive and develop existing product lines within the group
Creating and delivering engaging training materials and sessions for colleagues, customers and external partners
Not essential however IFE Level 2 or 3 in Passive Fire Protection
This position would suit a Product Specialist/Manufacturing Engineer/Product Engineer or Technical Engineer....Read more...
.NET Software Engineer - Zurich, Switzerland (German speaking)
(Tech stack: .NET Software Engineer, .NET Developer, Software Developer, .NET 9, C#, Messaging layers, Distributed system architecture, System Testing, Test Driven Development (TDD), Continuous Integration, Mocking frameworks Agile, Scrum, German, .NET Software Engineer, .NET Developer, Software Developer)
We have a fantastic opportunity for a .NET Software Engineer to join an ambitious and innovative Software company near Zurich. This is your chance to work with some of the sharpest minds in software development. They are looking for technically curious and enthusiastic .NET Software Engineers to develop and enhance application software, from initial concept to market-ready product.
Our client is looking for passionate .NET Software Engineers with experience in the development of complex .NET applications and knowledge of messaging layers and distributed system architecture. You will also be competent in system Testing, Test-Driven Development (TDD), Continuous Integration, and mocking frameworks, whilst familairity with agile methods, especially Scrum is also expected. The ability to work effectively both individually and as part of a team is very important and somebody with an entrepreneurial thought process would be very well suited to the role. A relevant degree is also highly favourable.
This is your opportunity to be part of a new, technically challenging project and to be involved in the creation of a new application from scratch. The market is booming and our client are fast becoming a leader in their field!
All .NET Software Engineer positions come with the following benefits:
Bonus
Flexible working hours.
Work from home options.
Attractive social benefits
Location: Zurich, Switzerland / Hybrid Working
Salary: 90’000 CHF – 110’000 CHF + Bonus + Benefits
Applicants must be fluent in German, be based in Switzerland and have the right to work in Switzerland.
Noir continues to be the leading Microsoft recruitment agency; we can help you make the right career decisions!
NOIRSWITZERLANDREC
NOIREUROPEREC
NOIREURNET....Read more...
Maintenance Engineer
Chichester
Up to £54,000
12 hour shifts
Pension
Healthcare
Job description:
Maintenance Engineer
Our client a leading manufacturer is looking for a Maintenance Engineer with an excellent eye for detail and a passion for quality to join their team in Chichester. They offer a competitive salary and employment benefits as well as ample opportunities to grow and develop.
Roles and responsibilities as a Maintenance Engineer
Perform electrical and mechanical maintenance including planned and reactive maintenance activities on high speed production machinery
Record all relevant data, including any relevant refurbishment and overhauls that are required.
Support the operations teams by developing training materials
Work alongside other teams to identify solve problems.
Continually improve equipment maintenance strategies
Analyse PLC faults and diagnose external faults using various software programs
Requirements
Apprentice-trained electrical maintenance engineer, with a /NVQ3 in electrical engineering or equivalent
Ability to work a rotation pattern.
Minimum of 2 years' experience in manufacturing engineering, preferably in the FMCG sector.
Excellent knowledge of manufacturing engineering equipment, with experience working in production lines, warehouses and distribution centres
Understanding of PLC control system architecture and field control devices.
Strong MS Office skills and experience with CMMS systems.
Benefits
Up to £54,000
Pension
Healthcare
External & Internal training
Routes to progress within the business
Company overview/values/ DNA
As one of the leading food manufactures in the UK our client is looking for individuals who are as passionate as they are about producing quality products.
They provide an inclusive healthy environment where people can grow and develop in a diverse environment.
If you are suitable for the Electrical Maintenance Engineer, please apply below or give us a call on 01923 227 543
Alternatively, if you know anyone suitable for this role, we offer a referral scheme up to £400.....Read more...
Security Cleared Firmware Engineer – DSP Engineer - Cambridge – Spin-Out Company
A new Spin-Out company, based in Cambridge, providing product development for Security Cleared sectors, is currently looking for an experienced Firmware Engineer or DSP Engineer to work on a wide range of new technologies.
You will be working on a range of new technology inventions, providing expert approaches to Firmware Engineering and DSP Engineering applications. Due to the varied nature of the work, we ideally seek someone with knowledge of FPGA, DSP design and engineering, DSP Modelling, and design using embedded systems. Not all of these areas are required, but having experience in as many as possible in your past roles as a Firmware Engineer or DSP Engineer would be advantageous.
Specific experience working on high-speed electronic systems would be ideal but is not essential.
If you have previously worked in a security-cleared environment, it would be fantastic, although not essential as they are open to candidates from different sectors. However, you must be able to obtain security clearance. This usually means being a British Citizen or residing in the UK for five years in continuous employment. If you already hold security clearance from another source, this would be acceptable.
You are going to work on some extremely interesting projects that will help you continually develop your career. Apart from this, you will receive an excellent starting salary and a benefits package in line with the parent company, along with continuous career training for future progression.
We are looking for someone to start as soon as possible, so if you are interested, we recommend making an application now to avoid missing out. However, we understand you may have a long notice period, which can be normal in this sector.
For more information, please feel free to call Andrew Welsh, Director of Medical Devices Recruitment and Scientific Recruitment Specialist at Newton Colmore, on 0121 268 2240, or submit an application, and one of our team members at Newton Colmore will contact you.
Newton Colmore Consulting is a specialist recruitment company within the Medical Devices, Scientific Engineering, Scientific Software, Robotics, Data Science, Healthcare Communications, Science, Electronics Design, New Product Design, Human Factors, Regulatory Affairs, Quality Assurance, and Field Service Engineering sectors.....Read more...
.NET Software Engineer – Social Messaging Platform – Bonn, Germany
(Tech stack: .NET Software Engineer, .NET 10.0, ASP.NET Core, C# 14, Azure SQL, .NET MAUI, GitHub Copilot, Docker, Kubernetes, Microservices architecture, Angular 21, Vue.js, TypeScript, Programmer, Full Stack Developer, Architect, Softwareentwickler, Entwickler, .NET Software Engineer)
In 2012 our client launched a social messaging platform that has been taking the US by storm. After an extremely successful period our client has decided to hop across the Atlantic, in a bid to expand their sphere of influence and take up a firm foothold in the German and European markets.
A number of new offices are being opened in Germany and our client is looking for talented, enthusiastic and passionate .NET Software Engineer to bring their product to these new markets and help enhance this already successful company!
Successful .NET Software Engineer candidates should be able to demonstrate strong knowledge of: .NET Core, C# and Azure SQL. Any experience in the following is desirable: .NET 10.0, C# 14, Azure SQL, .NET MAUI, GitHub Copilot, Docker, Kubernetes, Microservices architecture, Angular 21, Vue.js, TypeScript, Azure, AWS, Node.js, Elasticsearch, Agile, TDD, BDD, Scrum, Kanban and MongoDB. Training will be provided in any of the technologies you lack, allowing you to turn your technological weaknesses into your greatest strengths!
All .NET Software Engineer positions come with the following benefits:
Stock worth €33.000. The stock would be in their parent company (a multi-billion dollar company). You would be able to sell up to a third of your stock per year which would therefore be worth €11.000 per year to you.
Flexible working hours
An early finish on Fridays that fall in the months of June, July and August.
€10.000 training allowance including attendance of Microsoft events and conferences.
4 days a month innovative time.
Free gym membership including yoga sessions.
Summer BBQs.
Birthday bonus package – including time off work on your birthday, dinner at a top restaurant or a paid day trip to a European destination.
Location: Bonn, Germany / Remote Working
Salary: €75.000 - €95.000 + Bonus + Benefits
Applicants must be based in Germany and have the right to work in Germany even though remote working is available.
Noir continues to be the leading Microsoft recruitment agency; we can help you make the right career decisions!
NOIRGERMANYRECSPNOIRGERMANYRECNOIREUROPEREC
NC/CM/BON7595....Read more...
Senior System Engineer (Microsoft / Citrix) – IT Services – Bern / Hybrid
(Tech stack: System Engineer, Microsoft On-Premises, Windows Server, Active Directory, Citrix Virtual Apps & Desktops, Citrix ADC, PowerShell, Configuration Management, IAM, PAM, ITIL, Infrastructure Architecture, System Engineer)
Are you an experienced System Engineer who wants to do more than simply operate systems? This is an opportunity to take real technical ownership across a complex Microsoft and Citrix environment, influence architecture and standards, and drive automation and modernisation across the platform.
Our client is an established Swiss technology organisation with a strong focus on high-quality IT services and customer satisfaction. As part of the Smart Workplace team, you will take responsibility for the operation and continued development of their Microsoft On-Premises platform and Citrix Virtual Apps & Desktops environment, working closely with Network, Security and other technical teams.
You will lead technical projects from conception through migration, modernisation and go-live, while also taking ownership of complex 2nd and 3rd level incidents. Alongside day-to-day operations, you will define and document standards, improve operational processes and drive sustainable solutions across the infrastructure.
A key part of the role will be increasing automation and standardisation using PowerShell and Configuration Management, while contributing to IAM/PAM initiatives and ITIL-based Incident, Problem and Change processes. You will also have the opportunity to influence architectural decisions and share your knowledge with an experienced team of Senior Engineers.
The ideal candidate will bring several years of experience in Microsoft On-Premises environments, strong knowledge of Windows Server, Domain infrastructure and Active Directory, alongside solid experience with Citrix Virtual Apps & Desktops and ADC. An IT qualification such as EFZ or equivalent is expected, with HF/FH further education advantageous, while excellent German is essential.
In return, you will have genuine technical responsibility, significant freedom to shape architecture and standards, flexible annual working hours, hybrid working, individual professional development and a highly experienced technical team. The organisation also offers modern workplace facilities including an on-site gym, relaxation room and internal cafeteria.
Location: Bern, Switzerland / Hybrid Working Salary Range: CHF 100,000 – CHF 115,000 Languages: C1 German (Speaking and Written) is required for this role.
Applicants must be based in Switzerland and have the right to work in Switzerland, even though hybrid working is available.
To apply for this position please send your CV to Karan Gajjar at Noir.
NOIRSWISSTECHREC NOIREUROPEREC....Read more...
An opportunity has arisen for a Java Developer to join a specialist cyber technology and software assurance company supporting UK Defence and Critical National Infrastructure programmes.
As a Java Developer, you will develop and enhance secure Java applications, backend services and system integrations within a restricted environment.
This is a 12-month contract based role offering a salary range of £600 - £650 per day and benefits.
You will be responsible for:
* Developing and enhancing Java-based backend services.
* Designing and implementing secure, scalable applications.
* Building and integrating RESTful APIs.
* Working with microservices architectures.
* Collaborating with engineers, architects and relevant stakeholders.
* Work within an Agile development environment
* Contributing to the development of technology supporting UK national security operations
What we are looking for
* Active Enhanced Developed Vetting (eDV) security clearance is essential.
* Strong experience in Java development.
* Prior experience working in secure, government or national security environments.
* Background working with microservices.
* Solid knowledge of RESTful APIs and backend services.
* Experience working within Agile development teams.
Desirable:
* Familiarity with Spring or Spring Boot.
* Knowledge of Docker or Kubernetes.
* Experience with CI/CD processes.
* Familiarity with AWS or Azure.
The candidates from the following background will be considered:
* Java Developer, Java Engineer, Java Software Developer, Java Software Engineer, Software Engineer, Software Developer, Java Backend Developer, Backend Developer, Backend Java Developer
If you have active eDV clearance and strong Java development skills, apply today to explore this contract opportunity.
Important Information: We endeavour to process your personal data in a fair and transparent manner. In applying for this role, Additional Resources will be acting in your best interest and may contact you in relation to the role, either by email, phone or text message. For more information see our Privacy Policy on our website. It is important you are aware of your individual rights and the provisions the company has put in place to protect your data. If you would like further information on the policy or GDPR please contact us.
Additional Resources Ltd is an Employment Business and an Employment Agency as defined within The Conduct of Employment Agencies & Employment Businesses Regulations 2003.
....Read more...
Role: Junior Maintenance Engineer
Location: Outskirts of Maidstone
Hours: Mon-Fri 8 am-4:30 pm (occasional overtime)
Contract Type: Full Time, Permanent
My client, an international leading manufacturing company based near Maidstone, is looking for a Junior Maintenance Engineer to join their team. This is an excellent opportunity for someone looking to develop their career within a supportive environment that provides guidance and development.
As a Junior Maintenance Engineer, you are responsible for ensuring that all site lubrication activities are carried out effectively to support plant reliability and prevent equipment failure. The role involves following and maintaining lubrication schedules, monitoring oil and grease systems, and working closely with the Reliability Engineer to drive preventative maintenance.
If you have experience or knowledge of lubrication, oiling, greasing equipment and bearings, or hydraulics within an engineering environment, this could be the role for you.
Your role will include:
- Being the owner of the lubrication schedule and being required to work to it as closely as is practical to do so, providing feedback for updates and support and recommending any modifications to it as necessary
- To identify and minimise any oil losses, keeping accurate records of what oils are topped up and where
- As well as the lubrications, it is important to ensure clean lubrication systems, including pump sets, pipework, and tanks, to control contamination and aid quick identification of leaks or problems
- Undertake risk assessments (RA) and Safe Systems of Work (SSoW) assessments for engineering work undertaken, and where there is a perceived risk to engineering personnel
- The role requires the competence to lead a team of contractors on planned shutdown days to assist with the completion of the schedules
- To ensure that all automated systems for oil and grease remain topped up with the appropriate lubricant
- To use SAP and other provided reporting tools to report defects, lubrication schedule progress, stock inventory checks and oil consumption records
- Ensure appropriate labelling and documentation control of lubricants used on site. This
includes labelling of tanks, drums, transport containers and relevant COSHH data
The Ideal Candidate:
- Previous experience with lubricating, oiling, and greasing equipment (within a manufacturing setting would be desirable)
- Experience with bearings and hydraulics is advantageous
- Engineering experience is desirable but not essential (training/development offered)
- An understanding of why preventative maintenance and condition-based monitoring are important
- Good communication skills
- Self-motivated
- Team player, but also confident to work individually when necessary
Benefits
– Highly competitive salary, dependent on experience.
– Private medical cover.
– Onsite gym and canteen.
– Breakout area with table tennis and pool table.
– Employee wellbeing activities throughout the year.
At KHR, we take care to ensure that you are represented as well as possible, so it is worth checking your CV for layout, spelling and grammar as well as making sure it is up to date before you submit. If you feel you need to highlight particular qualifications, skills or relevant experience with regard to a specific role, then please add a cover letter or a preface page. This does not need to be formatted in the same manner. In addition, if your CV is heavy with graphics, etc, please could you also submit a "clean" copy in Word. Thank you.
Knowledge House Resourcing Ltd is acting as an Employment Agency in relation to this vacancy. KHR - Recruitment Specialists is a trading name of Knowledge House Resourcing Ltd. Keep in touch with us online for job alerts, industry updates and market...
....Read more...
We are partnered with a globally recognised audio technology organisation behind professional products used by musicians, producers, engineers, venues and touring professionals around the world.
They are looking for an FPGA Engineer in Manchester with a passion for audio and digital technology to contribute to the development of innovative professional audio products. This is an opportunity to work on complex digital hardware, real-time processing and technology that shapes how audio is created, processed and delivered worldwide.
In this FPGA Engineer role in Manchester, you will:
Design, develop and verify FPGA-based digital systems for professional audio applications
Implement and optimise real-time signal processing architectures in programmable logic
Work across hardware, firmware and software teams to integrate FPGA technology into audio products
Contribute to system-level design, performance optimisation, testing and debugging
Explore new technologies and approaches to enhance product performance and functionality
The ideal FPGA Engineer will have:
Experience in FPGA development, digital hardware design or a related engineering discipline
Knowledge of digital logic design, real-time systems and signal processing architectures
Experience with relevant hardware description languages such as VHDL or Verilog
An understanding of embedded systems, hardware and software integration or digital audio
A genuine passion for audio technology, music or professional sound products
This is an opportunity to join a global audio technology leader, working alongside talented engineers on challenging projects that contribute to the next generation of professional audio products.
This role is based on-site in Manchester, UK. Relocation assistance is available for suitable candidates.
If you're interested in this FPGA Engineer role in Manchester, UK, apply now or contact Ed at efrost@redlinegroup.Com or 01582 878819 for more information.....Read more...
We are partnered with a globally recognised audio technology organisation behind professional products used by musicians, producers, engineers, venues and touring professionals around the world.
They are looking for an Embedded Software Engineer in Manchester with a passion for audio, electronics and embedded technology to develop the software powering innovative professional audio products. You'll work across embedded Linux, firmware and connected systems, helping deliver reliable, high-performance technology used by audio professionals worldwide.
In this Embedded Software Engineer role in Manchester, you will:
Develop and maintain embedded software in C and C++ for professional audio products
Work with embedded Linux, low-level software and microcontroller-based systems
Develop and integrate software features, communication protocols and device update mechanisms
Collaborate with hardware, firmware and wider software teams to deliver new products
Investigate complex technical issues, debug system behaviour and optimise software reliability and performance
The ideal Embedded Software Engineer will have:
Commercial experience developing embedded software using C or C++
Experience with embedded Linux, Linux-based systems or microcontroller development
Knowledge of hardware interfaces and communication protocols such as I2C, SPI, UART, I2S or TCP/IP
An understanding of software and hardware integration, debugging and system-level testing
A genuine passion for audio technology, music or professional sound products
This is an opportunity to join a global audio technology leader, working alongside talented engineers on complex products that demand reliable, high-performance software. You'll contribute to the development of new audio technology while working across the boundary between software and hardware.
This role is based on-site in Manchester, UK. Relocation assistance is available for suitable candidates.
If you're interested in this Embedded Software Engineer role in Manchester, UK, apply now or contact Ed at efrost@redlinegroup.Com or 01582 878819 for more information.....Read more...
A specialist independent building services consultancy has an immediate requirement for an intermediate electrical design engineer to join their team in their London office.
They work in a number of sectors including commercial, residential, educational and retail.
Working alongside the Lead Engineer, you will be communicating with the client and project teams, responding to their clients' needs, assisting in developing and producing reports, specifications, drawings, supporting/undertaking site inspections and overseeing testing and commissioning activities, following all health and safety, QA and environmental policies and procedures.
They are looking for
- A minimum of 2-5 years' UK building services experience
- Sound technical knowledge in Electrical Engineering Design and knowledge of current standards and legislations.
- Proficiency in electrical calculation software packages (Amtech, Dialux, Relux), AutoCAD. Experience of working in the BIM environment (REVIT) and MicroStation will be beneficial; however not essential.
- Familiarity with Microsoft Office software suite.
- Minimum HND/HNC (Electrical bias) - ideally Degree qualifications (relevant).
- Good written and verbal communication skills with ability to communicate with internal and external design teams and disciplines.
- Ability to write or assist with writing reports and preparing specifications/schedules
About Energi People
Having spent 20 years earning trust across MEP building services, structural and mission-critical engineering with the very best construction engineering firms in the UK, UAE, USA and beyond, we know the disciplines, the best employers, and crucially, the roles that arent advertised. Find out more at https://energipeople.com/....Read more...
Excellent opportunity for a Senior Software Engineer to join an innovative technology company based in Surrey, developing advanced imaging and detector solutions for demanding scientific and industrial applications. This is a hands-on position offering the chance to work across the full product lifecycle, from software development and system integration through to testing, production support and continuous product improvement within a multidisciplinary engineering environment.
Key responsibilities for the Senior Software Engineer role based in Surrey, onsite:
Develop and maintain software applications using C#, .NET, C++, Qt and Python.
Design and implement APIs, communication protocols and data acquisition systems.
Develop automated testing solutions, verification systems and engineering tools.
Support software quality through code reviews, CI/CD processes and release management.
Investigate and resolve complex issues spanning software, firmware, FPGA and hardware interfaces.
Develop SQL queries, reporting solutions and system integrations to support engineering and business processes.
Provide technical leadership and guidance to junior engineers.
Manage multiple development projects while ensuring high-quality delivery.
Key skills required for the Senior Software Engineer role based in Surrey, onsite:
Degree qualified in Software Engineering, Computer Science or a related discipline.
Demonstratable commercial experience in a Senior Software Engineer or similar position.
Strong commercial experience with C# and .NET development.
Experience developing software using C++ and Python.
Knowledge of API development and software integration.
Experience with test automation, source control and CI/CD environments.
Ability to work effectively within multidisciplinary engineering teams.
Any experience with scientific instrumentation, imaging systems, electronics, FPGA or hardware-integrated software would be advantageous.
This is an exciting opportunity to join a highly technical engineering team where you will play a key role in the development of innovative products, working on complex software and hardware integration challenges whilst influencing future technology development.
APPLY NOW! To apply for the Senior Software Engineer role based in Surrey, please send your CV to mbelmar@redlinegroup.Com or contact Mike Belmar on 01582 878807 for further information.....Read more...
Senior Mobile Air Conditioning Maintenance Engineer – FM Service Provider – M25 – Up to £55,000 + Van & Fuel Card CBW Staffing Solutions are currently recruiting for a Senior Mobile Air Conditioning Maintenance Engineer to join a leading FM service provider, covering a portfolio of commercial sites across the M25. ARE YOU AN EXPERIENCED AC ENGINEER LOOKING FOR THE NEXT STEP IN YOUR CAREER? This is an excellent opportunity for an experienced Senior AC Engineer looking to take that next step and play a key technical role within a large FM contract. Alongside carrying out planned and reactive maintenance, you will act as a senior technical point of contact, supporting the wider engineering team and helping to upskill and develop AC engineers across the whole contract. The successful candidate will have a minimum of 10 years' experience within the Air Conditioning industry, with strong technical knowledge and the ability to mentor and develop less experienced engineers. You will be expected to share your technical knowledge, assist with complex faults and help drive consistent engineering standards across the contract. The company offers a competitive salary of up to £55,000, a company van and fuel card, regular overtime opportunities, ongoing technical training and genuine long-term career progression. Key Duties & ResponsibilitiesCarry out planned preventative maintenance (PPM) and reactive maintenance on a wide range of air conditioning systems, including VRV/VRF, split systems, AHUs and FCUs.Diagnose complex faults and carry out repairs to ensure systems operate efficiently and reliably.Act as a senior technical point of contact for AC engineering across the contract.Support, mentor and upskill AC engineers across the wider contract, sharing technical knowledge and best working practices.Assist engineers with complex fault finding and technical issues where required.Help maintain consistent engineering standards across multiple sites within the M25.Identify training and development requirements within the AC engineering team.Perform routine inspections, filter changes, coil cleaning and system testing.Ensure all work is completed in line with F-Gas regulations and industry standards.Respond promptly to reactive maintenance calls across the contract.Complete maintenance reports and job sheets accurately using the company's systems.Liaise with clients, management and engineering teams to ensure high service levels are maintained.Identify plant improvements and provide recommendations where appropriate.Take ownership of your workload while supporting the wider engineering operation.PackageSalary: Up to £55,000 per annumMonday to Friday, 8:00am – 5:00pmCompany van & fuel card provided25 days annual leave plus bank holidaysOvertime availableOngoing training and developmentGenuine career progressionUniform, tools and PPE providedM25-wide commercial contractRequirements10 years' experience within the Air Conditioning industryValid F-Gas CertificationRelevant NVQ / City & Guilds qualification in Air Conditioning or RefrigerationStrong experience within the HVAC / Building Services / Facilities Management sectorExtensive working knowledge of VRV/VRF systems, split systems, AHUs, FCUs and associated plantProven ability to mentor, coach and upskill other AC engineersStrong technical fault-finding and problem-solving abilityFull UK Driving LicenceExcellent communication and client-facing skillsAbility to work independently while managing your own workload effectivelyWillingness to travel across commercial sites within the M25THIS IS A GENUINE STEP-UP OPPORTUNITY FOR AN EXPERIENCED AC ENGINEER LOOKING TO TAKE ON A MORE SENIOR TECHNICAL AND MENTORING ROLE.....Read more...
Workshop/ Bench EngineerLocation: Bedford. Hammond RoadSalary £28,820.09- Additional on call payments available after training.Monday to Friday - Full TimePurpose of Job:Provide a workshop-based engineering role repairing, servicing and maintaining wheelchairs.Main Duties and Responsibilities:Workshop Service:
Conduct repairs servicing and maintenance as directed by the Service Centre Manager/ Warehouse Supervisor/ Line Manager.Process all associated paperwork concerning repairs and servicing accurately on a daily basis.Ensure all warranty and scrap returns are labelled correctly and collated at the end of each dayEnsure infection control policy is followed at all timesUndertake Engineering work in terms of service and repairs, and refurbishment in accordance to prescription builds.Assist in clinical appointments with Healthcare professionals, for any repairs and servicing requirements.Undertake Admin duties as required.Ensure all parts used are allocated from Stores through Stores process.Strict adherence to Ross Care’s operational procedures.Adhere to the House Keeping procedure in accordance to the RCQP.Maintain a professional approach in all aspects of the role at all times including appearance, paperwork, power tools and work bench station.Do the job right, on time, every time.To be fully accountable for all aspects of your role.Stocktake – to assist with annual and interim stocktakes as required.Communicate effectively with all Customers at all times and to inform all Customer’s of relevant additional services from Ross Care as appropriate.To be fully accountable for all aspects of your role and maintain good communication throughout.Perform duties according to all Company policies, procedures and instructions.Following training completion, ability to join the on-call rota to archive additional payment.
Undertake the job in line with the Company appraisal competencies as follows:
Achieves business results and adds value to the CompanyFocuses on internal / external customersBuilds and maintains effective teamwork with colleaguesEmbraces change and deals with ambiguity
This job description shall not limit your role, you will also be expected to carry out any other duties that your Manager feels are within your capabilities and skill set. The above information may not cover everything involved in the position but gives indicates the size and scope of the role and may be subject to change as the role develops.Key Performance Indicators:Person Required: Skills:
Organised and can work to a planGood communicatorMust be able to fault findNeat and tidy writing
Knowledge:
Background and experience in mechanical or electrical engineering
Qualifications:
Full Driving Licence prefferedIdeally qualified to GCSE level / NVQ level 1 or equivalent.Satisfactory enhanced DBS disclosure
Other:
Training will be provided on wheelchair engineeringTrustworthy and possess a clean or appropriate DBS record
Interested in this Workshop/ Bench Engineer role? Please submit your updated CV. Bench Engineer, Field Service Engineer, Service Engineer, Workshop Engineer, Mechanical Engineer, Electrical Engineer, Maintenance Engineer, Repair Technician, Electro-Mechanical Engineer, Fault Finding, Mobility Equipment, Wheelchair Engineer, Woking Jobs, Surrey Jobs, Engineering Jobs. INDHSEquals One is an advertising and recruitment agency working on behalf of our client to promote this vacancy. You may be contacted directly by the employer should they wish to progress your application. Due to the number of applications we receive, we are unable to provide specific feedback if your application is unsuccessful.....Read more...
